Computer Support Forum

Memory card Slot not working

Question: Memory card Slot not working

Hi,
I purchased lumia 720 in december 2013, from last 3 months memory card slot is not working, i done all basic troubleshooting but still its not working, i gave my mobile in nokia care people are saying its 50-50 chances. and volume down button also not working, after updating to cyan sometimes my phone hanging its irritating a lot. can you suggest me how solve this problem.
Thanks

More replies
Relevance 100%
Preferred Solution: Memory card Slot not working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 79.54%

I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
Please help
System: Dell Studio 1558 2010-11 Model.

Answer:SD memory card/ Slot not working in Windows 10

Hi Anandani,
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
http://dell.to/1IlNMpd
Please let me know if this works.

4 more replies
Relevance 78.72%

I just received my T500, and there is a memory card slot on the front lower just right of the the touchpad.  I inserted my SD 512mb memory card and I hear a beep, but nothing works.  When I go to device driver, it has a message "This Device Cannot Start: Code 10)After pulling the card out of the slot this is the error message I receive. "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer.Click Troubleshoot to start the troubleshooter for this device" Any help would be appreciated.BobMessage Edited by MrBeer on 06-13-2009 12:22 PMMessage Edited by MrBeer on 06-13-2009 10:03 PM

More replies
Relevance 66.42%

Okay, I did something really stupid. It was late, I was in the dark, and I wasn't paying attention (obviously) so here's what happened...

I had a SanDisk 2GB Micro SD Memory Card that I was using in my cell phone.
I wanted to transfer some pics & photos from my computer to the phone, so I decided to stick it in the Express Card slot of my laptop. Simple enough, right?

....Well being the incredibly smart person that I am, I put the micro memory card in the adapter, but it was the wrong one. So my computer pretty much swallowed it whole. I can't get it back out.
Now I can't use the Express Card slot in my computer AT ALL, because the old one is still stuck in there. You can't really see it, but if you try to put another adapter in there, it won't "click". It won't go all the way because ... the old one I lost is still in there waiting to be rescued, haha.

So my question is: How do I get the memory card out of my computer??

I tried taking it apart, but I couldn't get the part of where the express card slot is, so that was no good. There's a way to do this, I know. I'm just not smart enough to figure it out on my own. Which is probably a good thing, because I might mess it up again, lol.

I have a Toshiba Satellite A215-S7416 laptop.
Any help is appreciated!

Thanks!

-Ashley
 

Answer:MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop

8 more replies
Relevance 65.6%

I have and AIO A5 series.  My problem: I can insert an SD card just fine, but it will not come out without using needlenose pliers or tweezers to grab it.  I've tried pushing in until I hear a click so it will pop out, but nothing has worked.  What do I need to do? Thank you.

More replies
Relevance 64.78%

Where is the memory card slot on the Pavilion 550-126?  The slot on the front does not look like the right size.  Is there a way to get a diagram of the front and rear functions?

Answer:550-126 where is memory card slot

Hi, Very interesting. The following link shows its specs:     http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards. 

1 more replies
Relevance 64.78%
Question: Memory Card Slot

Any idea why my memory card slot will not recognize my SDHC card. I install the card but I get nothing. Laptop is only 17 days old and this is the first time I've tried to use the memory card slot.

Answer:Memory Card Slot

Hi Eestub,
 
Welcome to Lenovo Forums.
 
We are really sorry to hear about the issue you are facing.
 
Which is your laptop model?
 
Try updating with Media Card Reader Driver. Click here
 
Hope this helps. Let us know how you get on.
 
Regards,
Shashi Kumar
 
----------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Relevance 64.78%
Question: memory card slot

I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
 

Answer:memory card slot

Put a card in it and:

Look in Control Panel - System - Hardware - Device manager

Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.

Also look to see no yellow ? or ! are shown, indicating missing drivers.
 

1 more replies
Relevance 64.37%

just received my new stream 11.  have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology.   Can anyone tell me what kind of card goes with that slot?  What's the maximum capacity? thanks! w











Solved!
View Solution.

Answer:which card should I buy for the memory card slot on HP strea...

Yes, that will work. -wes

10 more replies
Relevance 64.37%

hey, i put my kodak memory card in the slot and it seems to have deleted some of the pictures when i review them back on the camera!?..my pc doesnt allow me to even view the pics using the card slot!?please help thanks Phil

Answer:Kodak memory card slot on pc

Did you get a message when you loaded the card in the PC? if so what.

6 more replies
Relevance 64.37%

I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.

More replies
Relevance 64.37%

I recently bought a digital camera and the Fujufilm 256 Digital Memrory card (SD card) does not fit the slot in my computer. The computer is Dell Dimension 5150C, bought this year.Dell at the call centre did not understand the query, and Dell at the email site says that maybe the card is not compatible. The card is a stabdard one on sale throughout the UK.Could the slot unit be faulty? How can I prove it is so? Any advice welcomed.Many thanks

Answer:SD memory card doesn't fit slot

A Secure Digital (or MMC) memory card has a cut off in one corner and you have to be careful it is inserted the correct way.However, also make sure that you are using the correct slot of the four available (according to the specs).

10 more replies
Relevance 64.37%

My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks

Answer:How do I use the memory card slot on my laptop ??

Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.  

9 more replies
Relevance 64.37%

Hello,I lost the sd slot protector included with the laptop coming from the factory. ME worry that pins can suffer damage by dust, for example. ¿Lenovo could send a protector? Where can I find it? Best regards,Santiago.

Answer:memory card slot protector

Hi dnight,                           
                                                                               
Welcome to the Lenovo Community.
                                              
As per the query we understood that you are facing issue with the memory card slot protector missing in your laptop.
 
As this is a hardware issue as you have mentioned the part is missing, please visit the nearest service centre for further details.
 
Click here to open a link where you can select the country and get the exact contact support number. I?m sure they will be a great help.
 
Hope this helps! Do post us back for further queries.             &n... Read more

2 more replies
Relevance 63.96%

I have bought a replacement memory module, which is compatible, but it does not work. I have moved the original module to slot b to test the slot. When I boot the laptop it says to move the memory module to slot A.

Why won't it boot with the module in slot B?

Is slot B faulty or can I configure it to accept a memory module?

Thanks in advance.

Answer:Memory Slot B is not working of my Satellite L

Hi

Can you please tell us which notebook model do you have and which RAM module you have bought?
You must understand that on this virtual way it is not easy to say much about your issue.
Fact is that modules for upgrade must be compatible with hardware platform of your notebook.

This forum is full of different but similar reports where people have such problems.
Mostly the problem was RAM itself. Looking for cheap solution people buy some no-name product and not high quality products. The "Value" RAM Modules use a lot of cheap chips utilizing multiple banks/channels, which can cause compatibility problems with some Chipsets/CPU's.

3 more replies
Relevance 63.55%

I bought an HP Laserjet CM1312 printer, and it has memory card slots on the front, but no USB slot.

Do they make any adapters that would allow a USB drive to plug into one of the many memory card slots on the front? (MS, CF, etc.)

Thanks.

Answer:USB to Memory Card Slot Adapter for Printer Available?

Highly doubt it, as the ones that are the opposite have a controller of some sort built in to change the data so USB can read it.

1 more replies
Relevance 63.55%

Hi everyone,

6 Months ago I switched on my desktop PC after a long aircooled night, noticed that my case fans (actually two of them) are running extremely fast and the PC keeps rebooting before reaching the OS screen. I looked into the pc and was shocked! the PC was just sinking in water! Yes, you read that right! I was turning-on my PC multiple times while ALL the parts were covered in water (motherboard surface, all expansion cards surfaces, hard disks ... everything!). Condensed humidity was transformed by the air conditioner into a complete water shower! I unplugged the PC and dried it out using an air blower and let it dry near the window for about an hour, then turned it on again, and YES! everything was working fine! felt very happy as I survived the catastrophe, and returned back to the normal daily use of the PC, but of course without using ANY air cooling in that room again!

2 Weeks ago, I got a defect in my motherboard: one memory slot is malfunctioning (the PC never boots with that slot occupied). I emptied that slot and currently using the other 3 slots only, and resumed using the PC.

1 Week ago, my expensive graphic card suddenly died (GeForce GTX Titan).

I am now confused! Are these defects directly related to the water sink that happened 6 months ago (delayed effect?), or it is just a coincidence? I heard something from a friend about a hidden short circuit that might keep lurking in the motherboard and starts damaging PC parts one after another e... Read more

More replies
Relevance 63.55%

I understand that my Lenovo 3000 N200 will accept the above card but cannot see how to place it into the machine. Can anyone enlighten me please ? 

Answer:Card reader slot for Memory Stick Pro Duo

Same problem here although I have a Lenovo 3000 N 500, which says it supports MS, MS pro (but maybe NOT the MS Pro Duo?).Can anyone help please?

7 more replies
Relevance 63.55%

:confused Hi Guys Need some advice ,plus may I wish you all a Happy new year....
OK!..I have been given an nintendo ds lite for chrimbo and luv it...but would appreciate some advice as to how to acquire a 1 or 2gb memory card to fit slot 1.....there is a lot of info out there relating to DS slot-1 flash cards ,Rd4 etc,but there appears to be no definitive site where a memory card that can be obtained for a ds lite slot 1 is indicated.
My daughter has the ability to downland over 50 games for me if I can discover the correct card to purchase which she can then download onto and which in turn will fit slot 1 of my nintendo ds lite....so any advice once again would be greatly appreciated for the uninitiated...ie ME!!!
 

Answer:nintedo ds lite slot 1 memory card??

what you need is an SD or Micro SD card and also if you want to upload the games,music,pictures or whatever into the DS you will need a card reader

hope that helps
 

6 more replies
Relevance 63.55%

Hello, I have an A31p with two 512mb cards  (one in each slot) but it only shows 512mb total memory.I've tried swapping the cards between slots 0 and 1, and also tried removing the slot 1 card, and always end up with 512mb.I've run the PC doctor utility that comes on the laptop, but I haven't found much more info there.I assume this means there is a hardware problem with slot 1.  Any ideas of how to fix this?If there is no way to fix this, can I use a 1gb card in slot 0? Thanks in advance...

Answer:A31p only detecting one memory slot - is 1gb card ...

Welcome to the forum! One RAM slot going bad is a faily common problem on ThinkPads of that generation, the most affected one being T30, but I've seen it on A31/p, X30 and T23 as well...now, to the answers: a) You can install 1Gb DIMM in your A31p. Mine all have 2x1Gb and work great. b) You can also try putting additional pressure by applying a thin piece of paper between the DIMM and the slot itself, or putting a post-it or two between the cover and the slot. c) There are companies which do this type of motherboard repair, I  have heard good reviews about hammershead tech. Hope this helps. 

9 more replies
Relevance 63.55%

My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.

Answer:Memory card slot not recognized on printer

Welcome sannallett,
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?

3 more replies
Relevance 63.55%

Hi everyone,

6 Months ago I switched on my desktop PC after a long aircooled night, noticed that my case fans (actually two of them) are running extremely fast and the PC keeps rebooting before reaching the OS screen. I looked into the pc and was shocked! the PC was just sinking in water! Yes, you read that right! I was turning-on my PC multiple times while ALL the parts were covered in water (motherboard surface, all expansion cards surfaces, hard disks ... everything!). Condensed humidity was transformed by the air conditioner into a complete water shower! I unplugged the PC and dried it out using an air blower and let it dry near the window for about an hour, then turned it on again, and YES! everything was working fine! felt very happy as I survived the catastrophe, and returned back to the normal daily use of the PC, but of course without using ANY air cooling in that room again!

2 Weeks ago, I got a defect in my motherboard: one memory slot is malfunctioning (the PC never boots with that slot occupied). I emptied that slot and currently using the other 3 slots only, and resumed using the PC.

1 Week ago, my expensive graphic card suddenly died (GeForce GTX Titan).

I am now confused! Are these defects directly related to the water sink that happened 6 months ago (delayed effect?), or it is just a coincidence? I heard something from a friend about a hidden short circuit that might keep lurking in the motherboard and starts damaging PC parts one after another e... Read more

More replies
Relevance 63.14%

I installed 2 256MB cards (original toshiba), but only one is recognised by the bios. When I change the slots (between the 2 memory cards) the problem is the same. Thus, it seems not to be one defect memory. What can I do to get both cards working (can it be a defect mother board or some special setting)?

Answer:Memory slot 0 of Tecra 8200 is not working

I have two mainboards from Tecra 8200 with same problem, it is an hardware defect on the board. Only thing You can do is to change the mainboard ( I got last year a new one for roundabout 75 US$ in internet auktion) or to work on with only 256 MB.

Message was edited by: olli23

2 more replies
Relevance 62.73%

(NEWBIE/FIRST POST)
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016).  Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards.  All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer.  I currently have all the latest Windows 10 software drives installed.  Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 











Solved!
Go to Solution.

Answer:110-151BR - Memory Card Slot Not Functioning (Bran...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved.  The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it.  Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you.   But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

1 more replies
Relevance 62.73%

(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016).  Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards.  All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer.  I currently have all the latest Windows 10 software drives installed.  Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?











Solved!
Go to Solution.

Answer:Memory Card Slot Not Functioning (Brand New Comput...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved.  The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it.  Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you.   But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)

1 more replies
Relevance 62.73%

ok, i was bored and got some homebrew for my ds, but i needed some files off my psp memory stick, and couldnt be bothered to charge it as its dead and i cant find the charger, so i thauhgt "ill try it in my laptop sd card slot reader" and after a some moments later, bang!! autorun pops up, with the memory stick icon on it, all the files are accessable aswell

now my question is, HOW DID THIS WORK!, i looked in the slot and the pins are much to big/spaces to fit all the pins on the card. everyone know theres a size difference between sd and memorystick. how did it work, i didnt think there were duel sd and memory stick readers, all the usb ones if seen have seperate slots. this is bugging me, as it shouldnt, that and i have to get it in just the right place to get it to work, it doesnt seem to fit snug in the slot.
any idea on how the hell this is working thanks
 

Answer:memory stick pro duo in laptop SD card reader slot? it is even possible? i need help

11 more replies
Relevance 62.73%

I have a Toshiba A135 S7404 running Windows Vista Home Basic, the max memory upgrade is 2X2GB which I purchased via newegg.com and installed. When I turned it on, black screen and no boot up. Basically it will only reconize one 2GB of memory, doesn't matter what slot as long as it is only one. I tested both memory chips both work in the computer and in either card slot, just not both chips in both card slots. What the heck?????? Even stumped the Geek Squad guy at Best Buy, he seemed to think it the mother board issue. It runs much better on the 2GB then it did with the 512MB, cha. Computer should be able to run both 2GB card in each slot and reconize about 3.25 to 3.65 of the memory, if it would run both cards at the same time. ** I did upgrade the BIOS from 1.6 to 1.9 as most of the blogs suggested-still won't recognize the 2nd 2GB card.
 

Answer:Toshiba A135 2nd card slot, no memory recongnition

cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
 

3 more replies
Relevance 62.73%

Hi,

Can anyone tell me what the max capacity SD that can fit into the integrate slot in the Satelitte P300D 21K laptop?

is the slot compatible with High Speed SD cards too?

Thanks in advance

Answer:Satellite P300D-21K SD Memory Slot - Max Card Capacity

Hi

As I?m not mistaken the notebook?s card reader is compatible with these cards:


SD Card 8MB-2GB
SDHC Card 4GB-16GB
xD picture card 16MB-2GB
Memory Stick 8MB-256MB
Memory Stick Pro 256MB-2GB
MultiMediaCard 8MB-2GB
miniSD (with adapter) 32MB-2GB
microSD (with adapter) 512MB-4GB
Memory Stick Pro Duo(with adapter) 256MB-4GB

Greets

1 more replies
Relevance 62.73%

Satellite A200-1VO has memory slot, e.g. SD memory card slot but I cannot insert any memory cards, the fap doesnt even open.

Answer:Question about memory card slot on Satellite A200-1VO

Hi,

why can?t you insert any cards? Do they not fit in? Please give a better description about that issue. And could you please by the way explain what a "fap" is.

Cheers

6 more replies
Relevance 62.73%

ok, so im at a hotel internet cafe in brazil, and i notice that below the normal floppy drive (external 3.5"i assume) there is another slot, which is occupied by a memory stick reader. this reader services Memory Stick Duos, something called CF, SD cards, and something called SM, 4 cards in total, with a button on the other side of the CF one.

i plug m memory stick duo adapter in with my Memory Stick Pro Duo inside, and i cant find it on my computer. there is a light that is labeled as "Access" on the top, and it doesnt blink when i plug it in.

any idea on whats wrong, and if this could be a software fix? i could change that on this computer if needed.

also, anyone know how to change the language on a Windows XP Professional computer? its in spanish and i will operate better in english

Answer:HELP: Memory Card Readers in External 3.5"slot

Sounds like a hardware problem to me. Make sure everything is connected okay and try a standard memory stick.

As for the language:

"Select the appropriate Menus and dialogs language from the Regional Options applet in Control Panel. The Menus and dialogs drop down list will display all the installed languages."
http://www.microsoft.com/globaldev/D...mspx#MUIques19

Dan

1 more replies
Relevance 62.73%

my sandisk memory card from my digital camera will not work with my laptop for some odd reason,, i have a dell inspiron 6000 with windows xp,, it actually comes with a san disk slot , there was a time 6 months ago where it would work but now nothing ..

when i put the card in the slot it makes the chime that its been put in but i cant get to the card through my computer , or find it anywhere ..
it doesnt even give a message saying the driver is not working properly or something

please help

Answer:Sandisk memory card will not work in my laptop , but i have the slot for it????

you might have to wait a little bit.

Sometimes, when I connect my camera to my computer it takes about 30 seconds for it to read it and pop up. Especially if I have the whole thing packed with RAW's.

Try connecting your camera to your computer instead of using a card reader.

1 more replies
Relevance 62.32%

Hey,

I really need some help with how to remove my Memory Stick Pro DUO from the card slot.

The laptop has read the stick fine and I can see all the files in it however I can't seem to get it out. I've tried to push it in a bit to make it pop out but this doesn't work and it's also quite far in so I can't pull it out.

Anyone have any ideas?

Thanks

Answer:Satellite A100 - How to remove Memory Stick Pro DUO from the card slot

Hi

In my knowledge there is no additional help for Memory Stick Pro DUO removing like on the PCMCIA slot.
You should try to pull it out. If you don?t manage to pull it out with you fingers you could use a pair of tweezers.
But be careful.

2 more replies
Relevance 62.32%

Hi there,

I need some help.

I recently upgraded my P100-MA6 to Vista Home Premium 64-bit and everything is running perfect and I have located software, drivers, and such for every component except the built-in SD memory card slot!
It will not work at all and I can't seem to find a driver or controller that I need for it to run/recognize my SD cards.

Can anyone point me to the proper driver for this component to run under Vista 64-bit O/S?

Is there one?
If not, can someone let me know that this is an issue that has no solution?

I know it seems odd, its the last thing I need to do for a completely perfect upgrade!

Specs on the laptop are:

Intel Core2 T7200 2.0ghz, 4GB pc-5400 OCZ ram, 200GB HDD, Nvidia GeForce Go 7600 gpu, Vista 64-bit O/S,

If you need any other specs just ask!

Thank you in advance to whoever reads this and may be able to assist me!

Regards,

Paul

Answer:Re: Satellite P100-MA6 - Need driver for SD Memory Card Slot using Vista 64

Go into Device Manager and look in the Properties of the Unknown Device, click on the "Details" Tab, and look at the Hardware ID's.

Then use this website to identify the device and locate the drivers:
http://www.pcidatabase.com/

You may need to use drivers found in google if you cant find the Vista64 driver from other Toshiba models.

3 more replies
Relevance 62.32%

I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.

The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.

It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.

Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".

-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).

Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?

See also this Post:
http://www.sevenforums.com/general-d...robson-pe.html

EDIT:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!

That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)

Answer:Intel® Turbo Memory Card on Mini PCI-Express slot

  
Quote: Originally Posted by NoN


I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.

The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.

It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.

Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".

-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).

Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?

See also this Post:
http://www.sevenforums.com/general-d...robson-pe.html

EDIT:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!

That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)


With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.

ken

2 more replies
Relevance 62.32%

So in February I ordered my kid an inspiron 11 as first computer. Later I decided to upgrade the memory and I called Dell and provided my service Tag. Dell told me it had a 2GB memory card and I could upgrade to a 4GB card. I ordered the card and disassembled my computer to find there is no slot to upgrade. After an hour on the phone I find out that what I am looking at is one with a fixed memory module. I told them that per my service tag it is supposed to have a slot and be upgradeable. They told me there is nothing they can do.
So I say how bout you exchange this for one that has what I ordered. They say since its over the 30 days there is no way to return or exchange. I said even though its your fault ???
Am I being unreasonable ? All I want is what I ordered. After a few more calls to India One person finally tells me there is a first and second generation of this laptop. Ist gen has the fixed and the second has the replaceable. So I tell them that per  Dell tag  this is supposed to be 2nd generation and therefor it was built wrong. They again say " we have a 30 day no Hassel return " and your over that.
Any suggestions folks ? I'm sick of beating my head against the wall with these people

More replies
Relevance 61.91%

                   When i insert a SD card into my Elitebook 853w runing windows 10 (64 bit).   Nothing happens.  When plug somthing into 1 of the USB solts,  it reganizes it.  Please Help -Jonathan 

Answer:SD card slot not working

Please check your AutoPlay settings.Type Autoplay  into the Start Menu Search Bar and click on the "Autoplay Settings" result.Choose a default behavior for 'Memory Card'. It might be set to 'Take No Action'. More detailed info: Customize AutoPlay  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.          If my answer solved your problem please mark it as the Accepted Solution. Thanks!

1 more replies
Relevance 61.91%

This is a used Toshiba laptop I got a month ago. The previous owner said he never used the SD card slot. I know why, because it's not working. When I slide any SD card in, the light comes on for 1 second and then comes off. The card is not recognized. Needless to say, I know the cards are good because they work everywhere else, including a USB card reader I have.

I checked Device manager and I don't see a problem. I believe the SD card reader is the "USB Mass Storage Device"?

I ran troubleshooting and it found that there is a problem with PnP devices and an "unknown device doesn't have a driver". It didn't find a solution or the driver.

I went to the Toshiba site and downloaded a couple of card reader driver versions.
Can someone please tell me the sequence, I uninstall, reboot, install new driver?

Thanks!

Answer:SD card slot not working.

There is a program called AIDA that you can download from here:

EVEREST Ultimate Edition - PC Diagnostics | Lavalys.com

Run it and under Windows Devices look for unknown devices. Click on the unknown device and it will tell you what the device is, probably the SD Card reader. Download the drivers for it from Toshiba and install.

1 more replies
Relevance 61.91%

I purchased a new Blu Windows phone and put in the SIM card from my old phone (carrier: Petro Canada (Rogers network); it does not work in slot 1, but it works in slot 2. The problem is that when sending a text message I have to keep changing to 2 before it will send. It also affects how numbers are stored. When I select Sim 1 it says No Sim. thank you.

Answer:Why isn't my sim card slot 1 working?

Well I get where it says there's no sim in sim 1 when there's no sim in sim 1. So far makes sense.
But if the same card works in slot 2 and not in 1 I suspect trouble be brewin' in yer phones hard wares. Basically it's most likely a hardware fault and I suggest seeing if you can test it with another sim card. If that doesn't work, return device for repairs.

2 more replies
Relevance 61.91%

Hey! The integrated 3-in1 memory card reader does not recognize sd cards (tried two). Updated drivers/computer, everything. Installed the realtek card reader driver. Nope, still nothing. Have explorer show hidden files/empty drives, nothing.Both cards are recognized by another computer so it's not the cards.Any ideas?

More replies
Relevance 61.91%

Hello everybody.

Since sending a motherboard in for rma is both money-sink (need to ship it to them, a replacement unit and to reinstall windows) and an excruciating wait (weeks? months?) I'd like to try absolutely everything I can before I do.

Two months ago everything was working fine, then I had to take everything to another room to paint the walls in my room. Start getting "display drivers stopped working" as I plug the unit back, this over the span of three days. Case was cleaned last month, I decide to take out gpu and clean some more. Turn outlet and psu off, as soon as I start unscrewing the dvi cable I can feel static. Unplug psu, discharge power with the case button, take 6870 out and remove that little dust there was, put it back: gpu is powered up, fan spins, permanent black screen at boot, no video signal. Take it off, hook the thing to onboard gfx: everything works fine. Try back with 6870, black screen. Go get PSU tested, it apparently works (they didn't give me a full report on load). Go back, test mobo with three different older ati (pre-amd) cards, 3x black screen. Checked bios to make sure, main adapter was on pci-e.

I had other stuff to do so I put the issue to rest for a few days while I had one of the ati cards (2600 xt) double-checked by a store. As it turns out, the 2600 xt works alright, so I decided to take the plunge and go with a z77-a motherboard to replace the asrock (very cheap and couldn't even overclock so). After ... Read more

Answer:Card not working in first PCI-E slot

Are you cleaning out all the old drivers before switching all these cards? that can cause a card not to work right. But the reason you are switching to on board is because the bios does not detect the card. These motherboards- if they detect a card in a pcie X16 slot automatically disable on board graphics. So, it seems if you are switching to on board, it means BIOS isn't detecting the card is installed.

3 more replies
Relevance 61.91%

Can anyone help me please?
Laptop M301Z. Using Windows 10.  My SD card slot/Port is not working, no response at all.
I have tried to download & install Dell drivers but I am not sure which drivers I need for this port.
I am using Windows 10 but this may not be the problem.
Your help would be much appreciated.
Robert.

More replies
Relevance 61.5%

Hi, this is my first time on here so forgive me if I don't give all of the right information, I will try.  Until about a month ago my dvd player and SD memory card slot worked fine.  I was attempting to download pictures from the SD memory card to my laptop when for some reason it not only stopped reading the memory card but it erased it also.  I tried to watch a movie on it to see if it was working and it is not.  I checked the computer to see if I could manually turn it on and neither the memory card slot or the dvd player show up at all.  Is this a driver problem and if so how do I fix it.  Any help would be greatly appreciated.  Thanks, Linda

More replies
Relevance 61.5%

what are the memory size limitations, (if any) for the supported types ?

More replies
Relevance 61.09%

Hi, I have a HP Pavilion dv7-1243cl Entertainment Notebook PC that is running Winows 7 Ultimate. I don't remember if it came with Windows 7 initially, I think i might have updated it. Anyways my SD-Card slot reader is not working. It is not recognizing that anything is on it. Is it the driver? How can I install it?











Solved!
View Solution.

Answer:SD card slot not working - Not sure where to get the driver

Hi: This would be the card reader driver if you are missing it... This package contains the driver for the JMB38X Card Reader Host Controller inthe supported notebook/laptop models and operating systems. The JMB38X CardReader supports the following media types: SD, MS, MMC, and xD.   ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45180.exe

4 more replies
Relevance 61.09%

My Y500 is not recognizing my SD card at all. Does anyone else have this issue?I too have the Elan touchpad issues and lack of widi issues.

Answer:Y500 SD Slot not working / won't see sd card.

Use Google chrome to open this page. Update the chipset drivers and card readersupport1.lenovo.com.cn/lenovo/wsi/Modules/Driverdownload.aspx?SearchType=1&LogicType=0&MachineId=11051&IsSeachOne=true&IsBackPage=false&ptype=2&typename=IdeaPad+Y500&from=select





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

3 more replies
Relevance 60.68%

Hello, I have just gotten a T61P with a Smart Card Slot.  Is it possible to replace this with an Express Card Slot? I have looked at the parts lists and can see no differences in Motherboard or Bottom Case part numbers for a 6457-8LU ( which I have, and has a Smart Card Slot ) and a 6457-8Jx ( which has an Express Card Slot ). Looking at the FRU Manual, it looks like an involved process to get to the Card Slot, but I think I could handle it.  ( Electronics Tech for more years than I like to think about  :-)  ) Any input would be appreciated! Regards Michael

Answer:T61P - Replace Smart Card Slot with Express Card Slot?

Wow! I watched the videos on the Lenovo Training Site to replace the card. Complete disassembly! Voided warranty! And still not sure if it will work. Guess I'll use a USB Aircard instead of an Express Air Card. Michael

2 more replies
Relevance 60.68%

I have the following model Toshiba Satellite (U300-151 PSU30E-074017AR ) the
SD card slot not working I install windows XP SP 3 ,& the driver is installed 100% , I need to solve this problem ...

plz chk this link:

Answer:Satellite U300-151 - SD card slot not working

Hi!

What do you mean with its not working?
Does the computer recognize a SD card?
Is the card reader listed in device manager?

At first you should update the SD card driver. You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Bye

4 more replies
Relevance 60.68%

Hi,
I've had my TOSHIBA Satellite 2410-601 laptop for nearly 3 years and have never needed to use the SD slot. Now however, I would like to use it, since I've got it.
When I insert an SD card, the "flashy light" works, but I don't see the drive in My Computer.
I've tried downloading the drivers off this website and following the instructions - but to no avail.
It has to be a driver or programme problem I think.
(help!)
Thanks

[Edited by: admin on 11-Feb-06 20:29]

Answer:SD card slot not working - Satellite 2410-601

Hi

First of all you should check the device manager if the SD slot in installed properly.
If the yellow exclamation mark occurs in the device manger in the SD area so there is something wrong. Usually the driver is missing. In this case you have to install the SD host controller driver and SD memory card driver. These drivers you will find on the Toshiba website.

If the device was installed properly and the device manager doesn?t show any exclamation marks so you have to use a supported and compatible SD card.
Please check you user?s manual for supported SD cards.

4 more replies
Relevance 60.68%

This is my first post here, so be gentle on me

Since the symptoms of my problem are so specific and easy to reproduce I figured I would find the answers easily.. But after a whole evening of searching on Google, I have found nothing which can help...

I have just built my new PC using an Asus M4A78 motherboard and had surprisingly few problems.

However, today I found that I have a problem with "card readers".

I have a card reader in my printer, an internal 5 slot one (which connects directly to a USB header on the Motherboard), and I also have several external ones.

What I have found is this.

1. If I connect the Card Reader to the PC when its up and running and it works (it doesn't matter if there is a card in the slot or not).. I get the 'bing bong' noise.. The reader appears (I see the drive letter) and then when I insert a card, Windows 'mounts' it and I can view the files.

2. If I Reboot the PC whilst a reader is connected (and empty), when Windows boots I see the drive letters, but when I insert a card I get an 'egg timer' in Windows and double clicking on the card letter shows "Please Insert disk into drive X:"

3. If Boot the PC whilst a reader is connected AND there is a media card (SD, CF, etc) in the slot and it works normally.. The PC boots, the card is readable and significantly, if I can remove the card and reinsert it (or insert another card) and it mounts.

So the bottom line is tha... Read more

Answer:Card readers not working when I boot with nothing in the slot!

Disable "legacy USB support" in the bios, and see if the problem goes away
 

5 more replies
Relevance 60.68%

I recently got an ASUS NVidia GeForce ENGTS450 DC SL/DI/1GD3 graphics card (which is PCIEX16 2.0) for my PC, but when I connect it to the PCIEX16 (3.0) slot I don't get a display, if I connect it to the PCIEX4 slot I do get a display!

Anyone got any ideas why? - Thanks

System Info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Enterprise Evaluation, 64 bit
Processor: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4043 Mb
Graphics Card: LogMeIn Mirror Driver, 14 Mb (Incorrect - ASUS NVidia GeForce ENGTS450 DC SL/DI/1GD3)
Hard Drives: C: Total - 152273 MB, Free - 90053 MB;
Motherboard: Gigabyte Technology Co., Ltd., B75M-D3H
Antivirus: Windows Defender, Disabled
PSU: 485W (Have tried with cheap 650W with same problem)
 

More replies
Relevance 60.68%

HP Notebook - 15-af123cl, SD Card slot not working since Windows 10 64-bit updated. 

Answer:SD Card slot not working since Windows 10 Upgrade

Hi, Please download and re-install Realtek Card reader driver:            http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72086.exe Regards.

1 more replies
Relevance 60.68%

My G770 SD Card Slot has suddently stopped working.  Will not recognize that a card has been inserted.  Worked just fine for the past 3+ years.  Anyone got any ideas on a fix for this/













Solved!

Go to Solution.

Answer:G770 Card Slot stopped working

Hi Insman1132,
 
Welcome to the Forums  
      
As per the query we understood that you are facing issue with Card reader in your Lenovo G770 laptop.
 
Try to uninstall and  reinstall the driver and check for the issue.
 
Click here for the driver for windows 7.
 
Click here for the driver for windows 8.
 
Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                                          
 
Ashwin. S





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

7 more replies
Relevance 60.68%

Win xp 1.8ghz 512 ram
Where can I find problem preventing media card slot from working in computer?
Is there a driver for this?
Icon dissapeared
Supposed to be when I click Computer to view Devices With Removable Storage.

HELP
 

Answer:Smart Media Card Slot Not Working

Check the device manager for any conflictions.
 

1 more replies
Relevance 59.86%

Hi,

I've tried to install Windows 7 rtm downloaded from MSDN. Once I've installed it, my Satellite Pro A200 works fine, but the built in SD card slot not work, nothing happens when I insert a SD card, it does not come recognized.
Someone of you can help me?

Thanks a lot.

Francesco.

Pls. Excuse for my English..

Answer:Satellite Pro A200 - SD card slot not working on Windows 7

Hi

Have you installed a driver for SD card slot?
Ok you will not find a Windows 7 driver as yet but the most Vista drivers are also work on Windows 7.

Normally you need a driver for SD card slot so can you notice yellow exclamation marks in device manager?

What types of SD cards do you try? In the user manual you can find a list of supported SD cards.

5 more replies
Relevance 59.86%

Slot was always reliable; Inserted sd card while pc was coming out of standby mode and no longer works.  Device Manager shows PCI Device not working (PCI bus 1, device 0, function 1) but has no details on driver so it can't be found to update it.  Tried disabling then reenabling the driver with no success.  Checked sd card, can still be read in camera.  Swapped different sd cards with same result.  Slot is not damaged, think it is a driver issue.

More replies
Relevance 59.86%

Hi,

I've just installed Windows 7 in my Toshiba Satellite 2450-401, and I have the Base System Device driver problem - my sd card slot is not working... Is there any way to solve this problem?

Best regards

Answer:Windows 7 and Satellite 2450-401 - SD card slot is not working

I don't see any problem there. You have old and not Win7 supported notebook.
What you do is nothing but ?experiment? to see how newest OS runs on old notebook model and you probably know that some hardware or Toshiba function will not work because of missing drivers, tools or utilities.

Anyway, on this forum I found thread about Win7 installation on old Satellite Pro M30.
Check it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=50572

There you can read how the guy solved issue with SD card slot.

2 more replies
Relevance 59.86%

Hi, i have a digital capture card, which is a PCIe x4 type card, i am trying to install it in the M70e tower PCIe x16 slot. When the card is in the screen stays black on power up, can't see anything, when the card is removed machine works fine.I have tried re-seating the card a number of times, i have also went into the bios & selected "IGD" as the graphics option incase it was looking at this slot and expecting a graphics card. The monitor is connected to the blue vga output on the pc.Anyone know why this doesnt work or have any suggestions? Thanks

More replies
Relevance 59.86%

I have a new Toshiba Qosmio F50 notebook.
I'm trying to use the express card slot to view pictures on a CF card but it doesn't work, it doesn't detect anything at all.

Any idea's? Does this need to be turned on at all?

Answer:PCMCIA (Express Card) slot not working on Qosmio F50

Do you use an adapter to view pictures on a CF card?
Maybe this adapter will not support from the notebook.

And do you see something in the device manager?

What happened when you use CF card with an USB card reader? The same?

1 more replies
Relevance 59.86%

Hi, i got a Toshiba Satellite X200 23P with Vista.
my flash card slot is not working, i'm using a SD card which i already used some month ago and worked well.
When i put the card nothing happens.

Please help.
Thanks

Answer:Satellite X200 - flash card slot is not working

Can you see the SD card in the disk management?

Do you have yellow marks in the device manager? Maybe you should also update the card reader driver. A newer version you can find on the Toshiba European website.

Furthermore you should test an other SD card. Maybe the card is faulty.

6 more replies
Relevance 59.86%

I've seen this problem reported for other Dell machines for a year now, since Windows 10 came out, but not for my model.
Since installing Windows 10, I can't use my SD card slot to write to, format, etc. a microSD card with adaptor. I can see the drive, read the card, and transfer files from it, but when I try to write I get an error message that the disk is write protected. It isn't. The exact same cards and adaptors work fine in my son's computer, and the cards work fine in my phone.
I just updated all my drivers and it still isn't working. When will Dell finally provide a fix for this? I can't even find any indication that they're working on it.

More replies
Relevance 59.45%

Hello. I have a Lenovo ideapad 100s - 80R2 that I just bought a few years ago. The device is running Windows 10 Home, build 1511. I have recently bought a Sandisk 32GB microSDHC card for use of the built-in microSD card slot of the device. When I tried to insert the card into the slot, there was not "Hardware Insert" notification sound coming out of Windows. I thought the card wasn't working. When I managed to insert the card into a USB microSD card reader, the system was able to detect the card, so it means it's working fine, but the microSD card isn't. I tried to find any updates for the SD card controller of the device, but it says it's already the latest version. Any help?  

More replies
Relevance 59.45%

Hello.

I have downgraded to XP on my machine and unfortunetly I am unable to get the Express card slot to work.

The Intel chipset drivers on the Toshiba site haven't dont anything.

I am trying to get an eSata port working via the express card like I did with Vista but no joy at all.

Any ideas?

Regards
Rob

Answer:Satellite P300-150 PSPC4E: Cannot get Express Card slot working with XP

Go to Device Manager and check if the express card is installed properly, or if its reporting an error.

You should update the BIOS to the latest version. BIOS updates can sometimes fix problems like this.

And ensure you have XP Service Pack 2 or 3 installed.

1 more replies
Relevance 59.45%

We have bought some ThinkCentre Edge 71 Towers (1577-G3G). We need to add USB3 and some additional cards to the system. The usb card is a Sharkoon USB 3.0 Host controller card PCIe x1. The card is compatible with PCIe x16 and it works in a IBM x16 slot. On the Lenovo the card works in the x1 slots but it isn't detected in the x16 slot.  We are now running XP but we have also tried Windows 7 with no luck. So has anybody been able to use any kind of x1 card in the x16 slot?

Answer:ThinkCentre Edge 71 Tower and USB3.0 card in x16 slot not working

Hello KajPe and welcome to Lenovo community,
 
We can use x1 card on x16 slot and it work fine.
Now as your USB x1 card is not working, when ever we install any hardware in our system we need to update the BIOS, as updated BIOS recognize the new installed hardware.
 
Kindly update the BIOS and then install the card.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy37usa.exe
 
After updating BIOS check if the card gets detect and then install the USB 3.0 driver
 
Best Regards,
Tanuj
 

2 more replies
Relevance 58.63%

I recently bought a Lenovo Yoga 3 and i have to say so far only a disappointing purchasethe battery charger has been changed twice because it did not work the sd card slot has never worked since day 1.I have tried reinstalling the drivers but nothing. does anyone knows what to do?thank youGabriele  

More replies
Relevance 57.81%

I have two M-Audio delta 1010lt sound cards but can only get one card working on my new PC. I installed both cards but only the one in my top PCI slot works and showed up in device manager. I have tried several times and different arrangements but i can never get both working at the same time! The bottom slot for some reason is being a problem. I tried manually adding the 2nd card to the bottom slot and then loaded the driver. here's the message I got:"The following hardware was installed... m-audio delta 1010lt. the software for this device is now installed but may not work correctly. this device cannot start. (code 10)"  My PC is:  Lenovo ThinkCentre M78 2111-C2U.  These are the regular old PCI slots, not PCI-express.  I wonder if updating BIOS or chipset would fix the problem?Thanks. 

More replies
Relevance 56.99%

I want to use IEEE 1394 port. So I want to replace sd reader slot to 34mm express card slot.How can I replace it? 

Answer:t410s: How can I replace sd reader slot to express card slot?

Hi and welcome to the forum!I suggest studying the HMM for T410s, but I think you would be better off buying a new T410s with express card slot and selling your current one due to cost and work involved in this.HMM link:- http://www-307.ibm.com/pc/support/site.wss/MIGR-72739.htmlHope it helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

3 more replies
Relevance 56.58%

Where would this go and which one would fit better in the correct slot?This one http://www.amazon.com/gp/product/B0051MXOPU/ref=olp_product_details?ie=UTF8&me=&seller= Or this one? http://www.amazon.com/GMYLE%C2%AE-ExpressCard-34mm-Adapter-Dual/dp/B0045BLP1S/ref=sr_1_47?ie=UTF8&qi... Thanks, Tominacus













Solved!

Go to Solution.

Answer:T400 Express card slot OR PC Card slot?

The T400 uses an ExpressCard 54 (it can also accommodate ExpressCard 34 cards).

1 more replies
Relevance 56.58%

Hi
I am confused about what type of adapter should i buy for my expansion slot, on the descriptoin it says that my laptop have PCI card type II : type :express card slot.

So far what i have read is PCI card type II are different from Express card. I just need to know what my machine supports, a 54mm card or 34 mm card, 16 bit or 32 bit, i just don't know, i need to buy an adapter for esata interface to connect my NAS via esata to my laptop for greater speeds.

Can anyone enlighten me on this, please?
regards
Praveen

Answer:Re: Satellite M60-104 PCI card Slot or Express Card Slot?

Did you take a look into the user manual?
There are all the details about the M60 series.

But as far as I know the M60-104 unit supports the Cardbus 32-Bit/PC-Card 16-Bit slot.
So you could use 1x PCMCIA Type-II only and 1x ExpressCard.

Greetings

3 more replies
Relevance 56.58%

Does it matter which PCI-E X16 slot you use? My board has 2 full X16 slots and I want to run my GTX590 lower down in the case to move it away from my soundcard.

Here's my board

http://www.gigabyte.com/products/product-page.aspx?pid=3449&dl=1#sp

Also does anyone have any experience running sound cards ect. in full size PCI-E X16 slots? they obviously don't engage the clips on the socket but do they still work?

I've never had reason to try either of these configurations and my computer is in pieces ATM while I'm upgrading it so I have no way to test for any problems but everything I've read on the subject so far says there shouldn't be any problems with either of afore mentioned configurations.

Thanks
 

Answer:Any PCI-E X16 slot for video card?Any PCI-E slot for sound card

When all else fails, RTFM! Note on page 12, Note 2, it says,



For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slotClick to expand...


 

11 more replies
Relevance 56.17%

I have a AMD 7870 Dual slot video card on my Asus M5A99X-Evo Motherboard. It is installed in the first 16x slot...and I also have a PCI-e 1x XF-I Titanium Sound card. The problem I am having is that one of the 1x slots is covered by the video card, and the 2nd one is open, but right smack below the Video card. My Video card is the Sapphire 7870 GHz Edition non OC.. Attached is a picture of what I am trying to explain. My other question is: Will this cause issues since one of the GPU fans is semi covered? Its it recommended? Last question: If I move this to one of the 8x slots below on my motherboard, will it cause my 16x PCI-E slot to slow down? Thanks ahead of time for any help you can provide.

Computer Specs -

Asus M5A99x-Evo Motherboard (AM3+)
AMD FX 8350 8 Core (4Ghz)
Sapphire AMD Radeon 7870 GHz Edition (2GB)
8GB DDR3 1600 Kingston HyperX memory (2x 4GB)
500GB WD Black Edtion SATA HD
1TB WD Black Edtion SATA HD
Sound Blaster XF-I Titanium PCI-E 1x Sound Card
Thremaltake 750 80+ Bronze PS (Smart Series)
DVDRW (SATA)
DVD-ROM (SATA)
 

Answer:Question about PCI-e slot below dual slot video card

My opinion ...

Yes, setting up like that will have an impact. The air flow to your GPU will be restricted so it will more than likely run hotter than it did. It may still stay withing recommended specs, but it will run hotter.

The motherboard has onboard sound (Realtek® ALC892 8-Channel High Definition Audio CODEC ), any particular reason why you don't use that? Onboard sound is perfectly good for gaming and the like now, its not like older machines where you needed a dedicated card for decent quality. In my opinion, you only need a dedicated card if you are doing a lot of detailed audio work (mixing, remastering and other specific audio work). This would totally remove the issue.
 

2 more replies
Relevance 55.35%

hi there,
i need to know which know which graphic card will fit for my computer. Ie i want to know which type: DDR ,DDR1 or ddr2 i bought my computer in 2007, but thats not enough to tell.
so please let me know how do i know which pci slot i have?
 

Answer:which graphic card slot do i require for my PCI slot

The type of memory doesn't matter, its the type of interface the computer supports among a few other things to watch for.

You likely have a PCI-Express slot, as long as it a x16 slot it doesn't really matter if its a version 1.1 or 2.0 slot.

Is this for your Dell or another computer? Whats you budget and what needs do you have for the video card?
 

1 more replies
Relevance 55.35%

????

There's nothing in the bios for assigning PCIE GPU to a slot. (single 4870 1G)

I have 4 PCIE slots (CrossfireX board, ASUS M3A32 MVP Deluxe MoBo, w/ 790FXNB.) I did some case clean up and wire management yesterday and I moved my card to slot 1 instead of 2... Didn't get a display after the POST and OS Boot, so I moved it back to slot 2, un-installed the drivers for the card, then moved it back to slot 1... Same problem.. I'm getting tired of messing with these cards..

No display after POST and OS Boot... CMOS Reset?? I have a PCIE Config in the BIOS, but nothing to assign a primary.

Ideas??

Answer:PCIE card won't recognise in Slot 1, but OK in slot 2.

Anyone??

6 more replies
Relevance 53.71%

My brand new Edge 11 (2545-3RG) that supports Max 2x2GB=4GB RAM was delivered with 2GB RAM in SLOT-0 (FRU 55Y3716, 2GB PC3-10600 DDR3-1333, which is the default, according to the hardware maintenance manual and the information on Lenovo Support site).In order to upgrade to 4GB Dual channel, I put an identical second 2GB stick (also FRU 55Y3716) in SLOT-1.The following happened:-  BIOS recognizes that 4096MB are installed.-  Win 7 x64 reports in System Properties that "Installed memory (RAM): 4GB (1.75GB usable)".The size of the usable RAM, 1.75GB is 2GB in SLOT-0 minus 256MB allocated for the graphics.- Windows applications can only "see" and use 1.75GB - Special utilities, such as Speccy, do "see" both modules.Speccy reports Total Memory Size as 4096MB. It is also supposed to display some detailed information about the memory in both slots. The information about the memory in SLOT-0 (here called Slot #1) contains, as expected, all details about Manufacturer, Part number, Serial number etc. However, the detailed information about the memory in SLOT-1 (here called Slot #2) is missing! Not even frequency in Max Bandwidth field is displayed!The bottom line is that the memory in the second slot (SLOT-1) is unusable. To avoid speculations, there is 100% guarantee that all memory sticks are in full working order. Has anyone else had this problem? skylark 

Answer:Edge 11 memory upgrade failure - 2GB PC3-10600 DDR3-1333 memory in the second slot is unusable

I have experimented a lot and found a temporary workaround.If  you keep the original 2GB PC3-10600 DDR3-1333Mhz in SLOT-0 and put instead 2GB PC3-8500 DDR3-1066Mhz  in SLOT-1, suddenly the second stick is correctly recognized everywhere, and everything works as it should.As a curiosity, the opposite doesn't work at all and the laptop won't even boot!Even if this workaround does work, the core issue still remains.Lenovo, please provide a response to this hardware issue! skylark

4 more replies
Relevance 53.3%

Good day.Some time ago i noticed that i have sim card slot near RAM modules. Machine type: 7666-B4G.So, i have a question: is it a WWAN modem installed in my notebook?  

Answer:x61s and slot for sim card slot

if you have the WWAN then there is the antenna next to the screen, do you have that?

2 more replies
Relevance 52.07%

hi,my T510 laptop have one 4G memory at the first slot. Now I have another one 8G memory. When I install it on the bottom(2nd slot), laptop fails to start. What's wrong? The machine does not support my new 8G memory? or baz the the sum of memory size is over? T510 only max supports 2*4G instead of 1*8G memory? Does it work to replace the fisrt 4G memory slot with  8G memory(not try yet since need too much work to do)? Thanks a lot

Answer:is that possible replace the first slot memory with a 8G memory in T510?

no it is not possible.The T510's dual core arrandale cpu can only support 4 gigs per slot.

2 more replies
Relevance 52.07%

yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
 

Answer:Is it bad to use PC100 memory on a PC133 memory slot ??

6 more replies
Relevance 51.66%

Hi, I have a Fujitsu Siemens Scaleo P, it has memory card input on the front..SD/MMC, CF, etc. Time to time they don't work, as in, I put the card in and nothing shows up on XP, and it doesn't show up on My Computer. Now, it's not working at all, it won't read my SD card or my CF card.

Are there any solutions?

Thanks
 

Answer:Memory Card reader not working

Any feedback...?
 

3 more replies
Relevance 51.66%

HiI have a internal SD/MMC/MS/CF card reader.I have used the SD and Compact flash reader once and it worked but now i try it and it doesn't.Whenever i insert the SD card it used to come up with a box saying to view it in explorer,windows media player ect.Now nothing happens even when i click all 4 drives it says 'please insert disk'when there is one init.can anyone help?thanks

Answer:Usb memory card reader not working

Is it internal or USB?

6 more replies
Relevance 51.66%

My memory card reader won't read. It's as if there is no driver. Did updating to windows 10 disable the reader?I've gone through troubleshooting steps but apparently there is no driver support for windows 10. Any one else have this problem? How did you fix it?

More replies
Relevance 51.66%

Hello,
 
I have lenovo G580 laptop, I am using Windows 8.1. I have an issue since I have installed win 8 that my laptop doesn't read any of my memory card through card reader though I have istalled the latest deivers.Please help me in this regard, I have attached the picture that shows that my drivers are up to date but still system prompts for Memory card driver.
 
Link to image
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums





Using Lenovo Essential G580 Intel Core i5 3210m @2.50ghz up to 3.1ghz

Answer:Memory Card Reader not Working

Link to image
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums





Using Lenovo Essential G580 Intel Core i5 3210m @2.50ghz up to 3.1ghz

6 more replies
Relevance 51.66%

I have a Gateway ML6732 running Windows Vista and recently my memory card reader won't recognize anything. It used to work beautifully, and I don't know what's wrong with it now. Does anybody know what drivers would be associated with it? I've checked my device manager and I have a yellow exclamation mark next to my SCSI/RAID Host Controller. I don't know if that has anything to do with my memory card reader, but I can't find an update anywhere. If anyone has any suggestions, they would be greatly appreciated. Thanks
 

Answer:Memory Card Reader Not Working?

Right click the yellow exclamation mark and update your drivers if the device manager is unable to update drivers which is not often . Then you can go to your own computers website and download all drivers needed put in make,model number and operating system of your computer
 

3 more replies
Relevance 51.66%

Hey guys, so I upgrade to Windows 7 on my HP DV9000t (with intel core 2 duo t5600 processor) laptop recently from XP Media Center Edition. Now, my built-in memory card reader won't work. Does anyone know where I can find the driver for it? or what the issue might be?!

Thanks guys

-Matt

Answer:HELP Memory Card Reader Not Working

Hello,

Try this driver: Ricoh 5-in-1 Card Reader Driver HP Pavilion dv9000t CTO Notebook PC - HP Customer Care (United States - English)

Good luck!
~JK

3 more replies
Relevance 51.66%

I was Purchased LENOVO 3000 N200 notebook last month. All devices and working properly. But my MEMORY CARD READER (5 in 1) is not working. I was downloaded drivers and installed in my laptop, but when i'm inserting memory card in to slot it is not showing any message in my laptop. But Green LED is blinking. Please give me instructions how to use MEMORY CARD READER...





ashok

More replies
Relevance 51.66%

I bought Acer Aspire one 722 with windows 7 on 2011. Recently I updated to windows 10. I was trying to check my memory card in my laptop but I was not able to do that. the laptop didn't recognize it (it didn't show any message or error). it is like I didn't insert anything. So please do you have any idea how to fix the issue. I read that we have to instal driver from acer website. So i will appreciate if you can lead me step by step how to do that. Thanks

Answer:my memory card reader is not working

Sorry your having problems with your system on Win 10.. As I am sure you know not all hardware is able to be supported for all system and may be your issue. However I think it could be that you may want to download the Reader Driver for Win 8 and run that on your system.. Seeing you did the update from 7 it maybe that it don't have the 8 driver and if you install that it may work.... I know that my AO isn't supported in 10. even though I run 10 I know that not everthing is going to work the way it was working when it was bought to start with. Seeing that that was the Software it was designed to run....  I would get the Win 8 driver from here http://us.acer.com/ac/en/US/content/drivers/3658;-;AO722 and try that see if that makes it better....  Only other thing that could be done is sadly if that don't work. You could buy a USB Card reader and use that to access your cards...  Hope this helpsJames

5 more replies
Relevance 51.66%

I have a HP Pavilion DV6 Notebook PC , widows 10 .
My memory card reader isn't working. How should I check what the problem is?
 

More replies
Relevance 51.66%

my memory card is showning but not working in pc or mobile too.....so what can i do for it? :( plz give me the answer immediately

Answer:my memory card is showing but not working in

Throw it away and buy a new memory card. It can no longer be trusted so there's no point in trying to do anything with it. They only last a short time if used often.

3 more replies
Relevance 51.66%

I have no idea when this stopped working, but i noticed it yesterday when i went to use it.
The device manager detects a 'unknown device' in the USB controllers list and gives this report 'Windows has stopped this device because it has reported problems. (Code 43)'

Answer:50-In-1 Memory Card Reader Not Working

The first thing I'd try is updating that particular driver. If no help, I'd delete the driver and let windows discover the device again.

Try this fixit link as well:

Tips for fixing common driver problems

A Guy

5 more replies
Relevance 51.66%

My memory card reader does not read or downloads  SD cards. I have gone to the HJ site and I cannot find Windows 10 listed for updates for the pc as it only shows Windows 8.1 as the latest downloads for my pc. How do I get my memory card reader updated drivers in order that I can again download SD cards in the Memory Card reader?

Answer:Memory Card reader not working

Is THIS ONE your PC?  They have made some changes in the SD card, even though they look the same. HERE IS A DOCUMENT that might give some insight on troubleshooting.BTW: the specs for SD cards have changed and that might be the problem.  It might help for this discussion to give the info on the problem card.  An SD card - older style would be 2GB or less.  A SDHC card could be 4GB to 32GB and a SDXC could be 64GB to 2TB.  It should be identified in some manner.  The bad thing is the older card reader cannot read the newer type SD cards.  An easy and fairly inexpensive solution is to purchase an external - USB - card reader that is for all of these SD card types.

1 more replies
Relevance 51.25%

I have memory slots on the front of my PC. When I insert my memory card from my digital camera a dialogue box used to automatically appear. So I could view/dload/print my photos... this has stopped working!

I am running XP.

Any ideas anyone? Thanks.
Trev.
 

More replies
Relevance 51.25%

Hello everyone, I was hoping yall gime a hand with this problem. All my usb ports and memory card reader won't access my devices/ sd cards etc. There is no drive letter in My Computer (it went missing for some reason)for my removable drive and when I plug in a USB device or insert a SD card all I get is the safely remove device icon in the task bar.
This is a compaq presario R4100 laptop XP home SP2. I contacted tech support and they provided me with a new driver but no luck, a tech from alocal computer store sugested to do a clean install of windows, I like to find a solution before I do that.
Thanks
 

Answer:Memory card reader/USBs not working

I have recently experineced the same problem and I really don't know why? Have you been changing settings within the "Services" and or tweaking your system?

The only way I have been able to resolve it (pain in the arse) is to right click on "My Computer > Manage > Disk Management, wait for this to load then right click on the drive without an assigned Drive letter and select Change Drive Letters and Paths, add the device a drive letter and then right click on the device (for some reason I always have to do it twice) and either Open or Explore the medium. Very convoluted I know but this method is currently working for me.
 

3 more replies
Relevance 51.25%

My iAPP USB Digital Memory Card Reader / Writer is not recognizing my SD memory chips at all. It used to recognize them when I inserted them into the slot. However, my hard drive recently crashed and after I installed a new hard drive, the memory card reader is no longer recognizing my memory cards. I run Windows XP, and Windows XP recognizes the hardware, but I cannot get the device to read my memory chips.

It seems like I need an updated driver, but I cannot find one anywher. Windows XP says that the latest and correct drivers for the device are already installed.

Please help me.

Thank you.
 

Answer:Iapp USB Digital Memory Card Not Working

Unplug ALL USB devices.
Open Device Manager.
View, Show Hidden Devices.
Uninstall all devices under USB Controllers.
Uninstall all devices under Storage Volumes. Say no to any reboot prompts until you are finished. Also, if a Storage Volume doesn't uninstall, ignore it and move to the next one.
If you have a yellow ? with unknown devices, uninstall all of the entries there as well.

When this is done, reboot TWICE.

Reconnect the USB devices and see if they're recognized properly.
 

1 more replies