Computer Support Forum

Error code 0X800F0805 on W7 SP1 installation

Question: Error code 0X800F0805 on W7 SP1 installation

SP1 fails to install. Something about zeros written before and after a mark?

Relevance 100%
Preferred Solution: Error code 0X800F0805 on W7 SP1 installation

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Error code 0X800F0805 on W7 SP1 installation

Don't install SP1 is not good yet

2 more replies
Relevance 58.22%

I'm running a Windows XP Pro system, 2gb good RAM, AMD Athlon 64 3500+, nVidia GeForce 9800 GT. I attempted to install a copy of Oblivion (which I have had and used many times in the past). The disk is in very good condition, and can be used on another machine. I have tried it on multiple drives for this one PC, but now, it will not complete the loading of the InstallShield Wizard. It gives me this error:

Error Code: -5006 : 0x80070001
Error Information:
>SetupDLL\SetupDLL.cpp (1194)
PAPP:Oblivion
PVENDOR:Bethesda Softworks (http://www.bethsoft.com)
PGUID:35CB6715-41F8-4F99-8881-6FC75BF054B0
$11.0.0.28844

I have searched for a solution online, but have not found one that works yet. Any suggestions?
 

More replies
Relevance 56.99%

I recently reinstalled Windows on my computer, and now I've come to installing the drivers for the Graphics Card and Sound Card, every time I try and run the installation programs I get this error message:"Setup has experienced an error.Please do the following:-Close any running programs-Empty your temporary folder-Check your internet connection (Internet-based Setups)Then try to run the Setup again.Error code: -6003"I have tried all of the suggested above bar deleting temporary folders as I don't know how to :P Any help would be greatly appreciated.

Answer:Error code on installation

Sound and graphics card types??

5 more replies
Relevance 56.58%

Hi,
I'm having problems installing Windows 7 SP1 (I've tried via windows update and manual download, same error always), it gives me error 0x80070057 e_invalidarg. In the CBS.log file I see (it always happens in the same step, updating printing-spooler-core
component):
2017-05-23 08:20:39, Info                  CSI    00000567 Begin executing advanced installer phase 38 (0x00000026) index 874 (0x000000000000036a) (sequence 913)
    Old component: [ml:328{164},l:326{163}]"Microsoft-Windows-Printing-Spooler-Core, Culture=neutral, Version=6.1.7600.16385, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
    New component: [ml:328{164},l:326{163}]"Microsoft-Windows-Printing-Spooler-Core, Culture=neutral, Version=6.1.7601.17514, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
    Install mode: install
    Installer ID: {3bb9fd2b-351e-4b9c-b1fc-ed0758805998}
    Installer name: [6]"Events"
2017-05-23 08:20:39, Info                  CBS    Progress: UI message updated. Operation type: Service Pack. Stage: 1 out of 1. Percent progress: 75.
2017-05-23 08:20:39, Error                 CSI    00000014 (F) Logged @2017/5/23:07:20:39.356 : [ml:292{146},l:290{145}]"events ... Read more

More replies
Relevance 56.58%

Dear Expert,
I have hardly issue that related error code 1402 when i installed some programs as:
Autocad nor Microsoft office...
I know that, this error related registry permission, when i follows some instruction on internet, i never get real
result.
Before, when i installed Microstation, this error code come up, but after that, i use the command:
secedit /configure /cfg %windir% xxxxxxxxxxx

At first time it fix, but more and more, this command not help.

Can you tell me what is the real resolve with this error?
Regards,

Answer:Error Code of installation 1402

Work though the Troubleshooting Steps for Windows 7.

3 more replies
Relevance 56.58%

Hi,

Win 7 SP1 fails installation with Error Code 800736B3.

I have tried a the solutions as suggested by microsoft without luck. I also re-installed Win 7 Ultimate (using the Upgrade option), but the situation is unchanged.

According to the log of CheckSUR there is 1 CSI missing identity and 2 CSI Payload files missing.

CSI Below is the CheckSUR file contents:


=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2013-11-23 09:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
(f) CSI Payload File Missing 0x00000000 jsproxy.dll x86_microsoft-windows-i..tocolimplementation_31bf3856ad364e35_9.4.8112.16476_none_1a378811bc3d6dc3
(f) CSI Missing Identity 0x00000000 appid prnxx002.inf_31bf3856ad364e35_6.1.7600.16385_5ad632810fefc3dc
(f) CSI Payload File Missing 0x00000000 iiswmi.mfl x86_microsoft-windows-i..atibility.resources_31bf3856ad364e35_6.1.7600.16385_ar-sa_300a6c40b68f6fc5
Summary:
Seconds executed: 447
Found 3 errors
CSI Missing Identity Total count: 1
CSI Payload File Missing Total count: 2

CheckSUR.persist contents:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2013-11-23 06:53
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Comp... Read more

Answer:Win 7 SP1 Installation Error Code 800736B3

We need the CBS.log as well please...

Please follow the Windows Update Posting Instructions and post the requested data

9 more replies
Relevance 56.58%

Good Day! I am working with this pc which had problems on start up. It takes 10-15mins to boot up which is really gives us headaches. I removed unnecessary start up programs on msconfig, defrag, disk cleanup, virus scan, deleted the scanned worms, and fortunately the booting problem was fixed.

However, now i'm having problems on plugging my external hard drive, i'm going to create a new back up. it seems like it doesnt recognize my device. whenever i check device manager, it shows that my device is an unknown device and doesn't install the driver. I tried to auto search or manual search for the driver but gives me the error code 28.

I tried to search for fixes, same issues but all of them doesn't work for me. And one more thing, we also have a Brother printer/scanner. The problem with that is now it can only print, and the scan option doesnt show. Already tried to reinstall the drivers , now also gives me error upon installation. I also ended up trying to use Driver Pack solution to update my drivers, now all of them gives me error on updating. It only says to try to search web for drivers.

Now I believe it has something to do with drivers installation. Can somebody help me with this problem? I'm really getting frustrated now, been working with this for 3 days. And please don't tell me to reinstall my OS bec that is the last thing that we're trying to avoid.

Answer:How to fix driver installation, error code 28

Just keep in mind that in the case where a PC has been positively infected by malware that the system can be messed up so badly, often due to the cleanup, that a clean install is the only viable option.
Of course we all want to avoid the clean install due to the sheer size of the project (installing and configuring Windows is the easy part) so it makes sense to try some possible fixes, but at some point you have to realize the time spent trying to patch up a system could exceed the time needed for the clean install.
Set a time budget. When you exceed the budget it is time to bite the bullet.

You might start by trying a Repair Installation:
Repair Install

Or you could start by uninstalling any programs related to the problem devices, then uninstalling the problem devices, and then scanning the Windows registry and deleting any and all keys that contain the device name. Then finding and deleting any folders related to the device. You could do the devices all at once, or one at a time.
Reboot, then run CCleaner's registry cleaner to find any stragglers you missed.
Then reboot and start installing the devices again (clean).
This is an advanced method, only for folks who are experienced working with the registry. You can really mess things up if you don't know what you are doing.
If these do not work you may be stuck with the solution that cannot be named.

5 more replies
Relevance 56.58%

No matter how i try it I mean an upgrade or a clean install this is the error that i get : windows installation encountered an unexpected error verify that the installation sources are accessible and restart the installation error code:0xE00000100

not sure what this means.... has anyone else had this show up for them... if so whats the fix?

Answer:installation error code:0xE00000100

Ive suddenly got the same error and its driving me bonkers only ever since i tried installing Build 7264 but it seem's that it also happens on all of my installation discs no matter what build, Any help would be muchly appreciated

8 more replies
Relevance 56.58%

Using Windows Media Creation Tool 64 from here: Windows 10

Tried 4 times today to upgrade from Windows 7. The install gets to 30 something % and then crashes. Just says "something went wrong" but the update history says Error code C1900107

My PC computer is powerful enough to run Win10 and has enough disk space.

Any idea what Error code C1900107 means and how to solve it?

Thank you.

More replies
Relevance 56.58%

I have researched solutions to this, and everyone says the same thing: to remove the previous version of AVG. We don't HAVE any previous versions of AVG on our laptop. We had Avast, and we removed it. So now what??

Answer:AVG installation error code 0xC0070643

EDIT:I'm assuming you are trying to install AVG instead of Avast. If you are NOT trying to install AVG and this error is popping up out of the blue then see the following post (#2 from Johnw) instead. -----------------------------------------------------------------------------------------The usual cause for AV uninstall issues is not first shutting down real-time monitoring.I wonder if it is Avast remnants that are actually causing the problem - mis-reported. Try the Avast removal tool here (it removes all traces):http://www.avast.com/en-gb/uninstal...I'm curious as to why you are making this change. Mostly Avast is given better vibes than AVG.Always pop back and let us know the outcome - thanksmessage edited by Derek

5 more replies
Relevance 56.58%

so i'm trying to install windows vista home premiem on my laptop and when it
starts to expad the files the error code shows up 0x80070017. i'm using the cd
that came with my laptop and i know nothing is wrong with it because i
previosly used it to re install vista on the same laptop before. i'm doing
the same exact thing as i did before so i doubt i'm doing anything wrong. can
someone help me please. my laptop is an acer 3690, and my hard dives are
both completly clean i reformated both and now i cant even go back inside windows
so how can i fix this problem

Answer:Installation error code 0x80070017

Are you using an M$ installation dvd, or o recovery disc that came with the laptop?

5 more replies
Relevance 56.58%

also known as: .NET Framework update installation error: "0x80070643" or "0x643"

I've googled and tried everything I've came across and still no luck with installing 4.0 Framework

this only started happening once I used a tool to change my Windows install from professional to home, (i installed the wrong version and my key didn't work) so i used a tool to downgrade my account so i could activate windows

the tool i used was called: "Windows 7 Downgrader" and when the problem started happening (no longer able to run daemon tools)

I'm unable to run : System Info - See Your System Specs
as that also requires the framework i can't install.

I've disabled (and even uninstalled) my Norton antivirus
I've run the Microsoft Fixit
I've run the NetFxRepair Tool
I've run the dotnetfx cleanup tool and re-installed versions 1, 1.1 SP and 35 (35 won't install and throws an error saying to install 4.0)

help

Code:
OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Home Premium Edition Service Pack 1
CommandLine = E:\6a7e1311c8e7f880805be9\\Setup.exe /x86 /x64
TimeZone = GMT Daylight Time
Initial LCID = 2057
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft .NET Framework 4 Setup
Package Version = 4.0.30319
User Experience Data Collection Policy: AlwaysUploaded
Number of applicable items: 11
Exe (E:\6a7e1311c8e7f880805be9\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupU... Read more

Answer:4.0 Framework installation :Error Code 643

Famework.NET repair tool fixed the issue, had to click next instead of finish.. and it repaired my 4.6 version

1 more replies
Relevance 56.58%

Using Windows Media Creation Tool 64 from here: Windows 10

Tried 4 times today to upgrade from Windows 7. The install gets to 30 something % and then crashes. Just says "something went wrong" but the update history says Error code C1900107

My PC computer is powerful enough to run Win10 and has enough disk space.

Any idea what Error code C1900107 means and how to solve it?

Thank you

Answer:Help! Installation Error: Code C1900107

Just got the very same error this morning on my new laptop. After surfing through some fixes i found couple of fixes and this thread of yours.

People are saying not enough space in System reserved but the real culprit is the Corrupt files in Windows.~BT folder. Rename it or delete it.

Refer to this for steps > Fix Error Code C1900107 While Windows 10 installation | Fix Errors

I just rebooted and started the installation again and it started.

2 more replies
Relevance 56.58%

I'm trying to install iTunes + QuickTime for my iPod i'm getting on Monday. I've had lots of problems with QuickTime before for some reason, but I managed to uninstall it and my computer was working just fine. Now when I try to uninstall iTunes 6, it gets to the very end of the whole installation and then gives me this error:
"QuickTime Installation Error Code: -3"
Then it will pop up the Windows Error Report thing for iTunes, and close that and it goes back to the installer and it doesn't think there's an error anymore or something because it says that the installation is complete, so I click Finish. But when I try to run iTunes, it won't start and gives me the Windows Error Report window every time. QuickTime won't even uninstall right, it can't find a certain file. When I try to uninstall iTunes, it uninstalls it but errors. Any ideas about what the problem is?
 

More replies
Relevance 56.58%

Hello, I just formatted my pc and installed with Win7. Then I tried to install a game i previously played on WinXP (name of the game is Sudden attack). However, it shows me "Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package".

anyone knows how to solve this?

Answer:Installation error code 1335

Hello!

Well, the error message is telling you what could be the problem.
I don't believe that you are installing this game from network,
so I am assuming that you are installing from CD-ROM.
Now, CD-ROM might bad and cannot read CD properly and that is why this could be problem with the package.
Maybe CD is bad and CD-ROM cannot read the content on the CD properly.

Try to install the game on some other PC.
If you successfully install this game, than problem is most likely with the CD-ROM.
If you cannot install on the other PC, the problem is most likely with the CD being bad.

Keep us posted...

3 more replies
Relevance 56.17%
Relevance 55.76%

I have tried so many things to install .net framework 3.5 in my windows 10 laptop . I have tried youtube i have tried win10 forum. No luck. I have uninstalled .net framework 4.0, 4.5 and 4.6 from my computer and tried installing 3.5 from program and feature. Then i tried to install from cmd. So my win 10 dvd is in e drive. So i executed the following code.
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:E:\sources\sxs
I get the following error code
Error 2 : The system cannot find the file specified.
So i went to my dvd drive and copied the sxs folder to my D drive and run the following code :
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:d:\sxs
But i get the same error :
Error 2 : The system cannot find the file specified.
I almost tried everything. Can anyone help? I don't want to install a fresh windows10. That will be too much of hassle. But at the same time i need the .net framework 3.5 for my older programs. Why microsoft did not come with a easy solution ? This is so frustrating. Please help,

More replies
Relevance 55.76%

Concerning;Title;Windows XP Service Pack 3 (KB936929)Originated;Update History Installation Failure Error Code: 0x80200010 Starting with;Download does not start after you accept the EULA on the Windows Update Web siteI followed instruction to register the files;To resolve this problem, you must reregister the following files:? Msscript.ocx ? Dispex.dll ? Vbscript.dll ? Scrrun.dll by entering >start>run>regsvr32 msscript.ocx,This resulted in a completion or success message, I'm not sure wether this was a register or re-register, . . however please can anyone tell me what I am suppose to do next, as per ;http://support.microsoft.com/kb/836936/en-us4. Click Start, click Control Panel, click Appearance and Themes, click Folder Options, and then click the File Types tab. 5. In the Registered File Types list, click the JS extension, click Advanced, and then click Edit. 6. In the Application to perform action box, type the following command depending on your operating system.? For Microsoft Windows XP, type: C:\WINDOWS\System32\WScript.exe "%1" %* In 5 I did not find the JS extension, ????I did find JSScript Script File, . . . . Is this the same one ????If so does this action apply to all four files, (above) ???

Answer:Sp 3 Installation Failure Error Code: 0x80200010

I found this; Rename (or just delete) the SoftwareDistribution folder and see if it helps. You can use the procedure described here: http://v5.windowsupdate.microsoft.com/v5co...id=21&ln=en Note that a side effect of renaming or deleting the SoftwareDistribution folder is that you lose your Windows Update History listing (not critical). (later on, you can just delete the renamed SoftwareDistribution folder) http://www.eggheadcafe.com/forumarchives/w...ost24597399.aspBut can not make it out, and can not see the relationship with the, Microsoft Online Assisted Support ?Anyone who can co-relate this in explanation I will be glad to hear from !

3 more replies
Relevance 55.76%

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

More replies
Relevance 55.76%

Hello,

I've just installed Windows 8 (from usb) on my brand new HP laptop and everything worked fine. But I didn't partition hard drive as I wanted, so I decided to install it again.

During the 2nd installation, the keyboard wasn't working (don't know why). So, when I was supposed to make partitions again, I deleted every partition and tried to make new ones, but I couldn't 'cause of the keyboard. So I just exited from the installation and turned off the computer.

Then I tried to boot the system from usb again, but all I could see was a blue screen with a message that my computer is damaged and needs to be repaired. There was also an error code 0xc0000034. And now everytime I turn it on, there's only the blue screen with no other options.

Any suggestions what to do?
Thank you in advance.

Answer:Problem during installation - error code 0xc0000034

Welcome to EightForums.

Did you boot the USB Pen drive in UEFI mode?

2 more replies
Relevance 55.76%

I am using Win XP on a pentium PC, and today I started getting Netsearch popups, but I can't use Malwarebytes because when I try to run the program I get the error message:

"CreateProcess failed: code 2. the system cannot find the file specfied."

I tried renaming the malwarebytes setup file but that didn't fix the problem.

Here's my HijackThis Log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:08:59 PM, on 1/22/2010
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\cisvc.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\HPZipm12.exe
C:\Program Files\Common Files\Lanovation\PrismXL\PRISMXL.SYS
C:\WINDOWS\System32\tcpsvcs.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel\NCS\PROSet\PRONoMgr.exe
C:\WINDOWS\system32\CTHELPER.EXE
C:\WINDOWS\GWMDMMSG.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\WINDOWS\system32\cidaemon.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\mov\del\mbam2-setup.exe
C:\DOCUME~1\MICHAE~1\LOCALS~1\Temp\is-MJ8R0.tmp\mbam2-setup.tmp
C:\Program Files\Malwarebytes' Anti-Malware\mbam22-setup.exe
C:\DOCUME~1\MICHAE~1\LOCALS~1\Temp\is-SF7R7.tm... Read more

More replies
Relevance 55.76%

I was Installing java for the game minecraft and I got this error: Error 1317. An error occurred while attempting to make the directory C:\Program File\Java\jre6

I do not know what this means I also tried uninstalling the old Java updates I had and got this error message: Error 1326. Error getting file security: C:\ Program Files\Java\ Get Last Error5.

I also just got a new computer if that means anything and I am running on Windows 7 with Google Chrome.
 

Answer:Java installation update error code

i need to bump this because I need someone to help.
 

1 more replies
Relevance 55.76%

After clean install of CU, when I try to install " Asphalt 8" game I receive the above message after downloading all of 2.97 GB over a slow internet connection & downloading starts again from scratch. Where is the earlier downloaded material & is there any way out from the loop?

Answer:Installation failed, Error Code : 0x80D02002

Where are you downloading it from? Steam? Browser? Which browser? Have you tried a differant browser like chrome?

2 more replies
Relevance 55.76%

Hello

This is my first post at the sevenforums.com even though I have been a lurker for several years.

I upgraded my PC and installed Win 7 64bit professional (earlier was using 32 bit) and proceeded with the automatic updates. I ran into occasional errors from time to time but mostly they were due to connectivity issues (undersea cable cut...duh!) but those were resolved on repeated attempts

Now, it seems I am stuck on the Windows 7 SP 1 update for x64-based systems. I have tried innumerable times to get it installed, but half way during the installation, it would stop and throw me this error - Code 800F0818

I read some old threads in this forum and ran the SFC Scan and it came out clean. My PC also has just been formatted and adequately secured by Avast and MBAM and now I am in the process of downloading the System Update Readiness Tool

Please advise on how to proceed from here on.
Thank you very much!

Answer:Win 7 64bit SP 1 installation error - Code 800F0818

Windows Update Posting Instructions

9 more replies
Relevance 55.76%

I have tried so many things to install .net framework 3.5 in my windows 10 laptop . I have tried youtube i have tried win10 forum. No luck. I have uninstalled .net framework 4.0, 4.5 and 4.6 from my computer and tried installing 3.5 from program and feature. Then i tried to install from cmd. So my win 10 dvd is in e drive. So i executed the following code.
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:E:\sources\sxs
I get the following error code
Error 2 : The system cannot find the file specified.
So i went to my dvd drive and copied the sxs folder to my D drive and run the following code :
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:d:\sxs
But i get the same error :
Error 2 : The system cannot find the file specified.
I almost tried everything. Can anyone help? I don't want to install a fresh windows10. That will be too much of hassle. But at the same time i need the .net framework 3.5 for my older programs. Why microsoft did not come with a easy solution ? This is so frustrating. Please help,

More replies
Relevance 55.76%

hello

plz can some one help me to bypass this error code installing my win 8 software

"your computer needs repaired

error code: 0xc0000260

Answer:win8 error code:0xc0000260 during installation

Hello Henry, welcome to Eightforums!

See if this helps ...

windows 8 Tutorials: Error code 0xc0000260 during windows 8 installation | Windows 8 Forums

1 more replies
Relevance 55.76%

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

Answer:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

5 more replies
Relevance 55.76%

I just download Win10_1511_English_x64 from Microsoft website with download manager but every time I try to install it I got error code 0x80070570 at 40%.
This is very disappointed Microsoft i'll try to download the iso with media creation tool and that will be my last try.

More replies
Relevance 55.76%
Answer:Error code: 0x80070570 during installation 7100 x86

As I have just posted on another thread put the iso back in utorrent and force a recheck. The same thing happened to me a couple of weeks ago and it turned out the iso was not complete. If it is complete try burning at slower speed.

4 more replies
Relevance 55.76%

Hi,

I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disk and error #49 with writing problem showed up.

I wonder what wrong with my laptop. Is it a hard drive problem?
Can anyone help me?

Thanks.

Answer:Satellite A80 - Error code 49 during recovery installation

Hi ClementLo,

> error #49 with writing problem showed up.
I don?t know when you exactly get this message but theoretically it could be a problem of the HDD. Maybe it has defective sectors and should be replaced?

Can you also test the same using a Microsoft disk? Maybe the disk is scratched?

1 more replies
Relevance 55.76%

Hi all. I am trying to upgrade my older computer which has an Asus M5A97 LE R2.0 motherboard by putting 2 Samsung 850 Pro SSD's in RAID 0 in which it had created that successfully but when Windows 7 tries to create a partition on it, I get the following error code and some other message.

It is saying that Windows could not format a partition on disk 1. The error occurred while preparing the computer's system volume. Error code: 0x8004242C

https://www.asus.com/us/Motherboards/M5A97_LE_R20/specifications/

I am using the AMD Raid option. I had to put the RAID driver onto a USB stick since Windows 7 was not seeing the drives until I had told it to install that driver first.

I tried deleting those extra partitions that had been created before and created new ones and it is still giving that error message.

Now there is another error. "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu." I went back to the BIOS screen and made sure it was enabled, so there shouldn't be any issue regarding that.

Let me know if you all need anymore details. Thank you for the help!

-------------

Other things I have tried doing is taking the RAM sticks out of the sockets and putting them back in and I also tried brand new unopened SATA cables, just in case and the error still happens.
 

Answer:Windows Installation Error Code: 0x8004242C

That motherboard has a UEFI firmware therefore
I tried deleting those extra partitions that had been created before and created new ones and it is still giving that error message.Click to expand...

it must if windows is also being installed to UEFI with a GPT format disc, be installed so that the installation creates a FAT format partition from which the firmware hands control to the FAT partition to load windows

UEFI must load windows from a FAT format partition. It can read NTFS file system but it cannot boot from it
The answer if that is the problem is to install to a complete unallocated partition and Windows will create the necessary partitions including the FAT partition.
Alternatively if the windows installation is to be installed in the - what we may call traditional BIOS and therefore MBR then that must be so set in the firmware

In order to offer further advice which edition of 7 is being installed
64 bit can be installed UEFI/GPT or MBR
32 bit can only be installed MBR
 

2 more replies
Relevance 55.76%

When I am trying to install windows 10 I am receiving during the installation upgrade an error code 0x80070005-0xb003 what should I do about that???NE

More replies
Relevance 55.76%

So This is my 3rd install disc I made and I Re-downloaded 64 bit windows 7 no problems. Integrity was checked and succesful. I burned at the slowest speed 2.4x Also no errors.

Once I go to install windows 7 it jumps to 8% then 100% then i get an error saying Files are missing or corrupted. I don't see why I should have this problem since downloading and burning process went smooth.

the error code was 08007017.

I also disabled my norton or most of it.

Anybody have any ideas whats wrong I only have about 2 more discs left to burn =(

Answer:Installation Problem Error Code 0X8007017

Welcome sebas215 to Sevenforums.........

You are trying to update to windows 7 from Windows vista Home premium..

First of all you cant update Windows vista Home Premium to Windows 7 Ultimate..
You can update Windows vista Ultimate to Windows 7 Ultimate..
You must have vista Sp2 installed in order to update.
Not to mention HDD space and all.......

2 more replies
Relevance 55.76%

Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.

Answer:.net 4 installation fails with error code: (0x80070643)

  
Quote: Originally Posted by mikep


Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.


Hi mikep,

Welcome to Seven forums.

Please make sure that you clean boot the system by following the steps below:

Troubleshoot Application Conflicts by Performing a Clean Startup

If aany firewall or antivirus installed then disable the same and check again. Please check these articles which would be helpful:

Error codes

I get error code 0x80070643 when installing .Net Framework 4.0 on - Microsoft Community

Kindly update your system s... Read more

9 more replies
Relevance 55.35%

After installing Flight Simulator X I get an error code 1722 followed by 1603. I have tried numerous ways to try find a solution without any success. Contacted Microsoft after lengthy phone calls and was told to watch their site fo a solution. Since found out there are hundreds of people with the same problem. Microsoft have no answers that i can find.

Answer:Flight Simulator X Installation. Error Code 1722 .

click herefollow thread, it suggests you need to reinstall windows installer to resolve this problem,good luck

10 more replies
Relevance 55.35%

I am trying to install the MBAM Administration and Monitoring Server on Windows Server 2008R2.  I have passed all the pre-requisite checks and fro testing purposes was wanting to set up just one server as the full MBAM server. I have the database
installed with reports successfully running.
The wizard runs for a period of time before failing.  The error code appears to point to the need to run the setspn command.  However, it is not clear in the documentation what objects and services need to have the SPN set in order to make this
installation succeed.  
Here Is the end of the Log file. Any Help is appreciated:
Property(S): ProductToBeRegistered = 1
MSI (s) (AC:B4) [15:53:11:787]: MainEngineThread is returning 1603
MSI (s) (AC:C4) [15:53:11:798]: RESTART MANAGER: Session closed.
MSI (s) (AC:C4) [15:53:11:798]: No System Restore sequence number for this installation.
MSI (s) (AC:C4) [15:53:11:799]: User policy value 'DisableRollback' is 0
MSI (s) (AC:C4) [15:53:11:799]: Machine policy value 'DisableRollback' is 0
MSI (s) (AC:C4) [15:53:11:799]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (AC:C4) [15:53:11:800]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2

MSI (s) (AC:C4) [15:53:11:802]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2

MSI (s) (AC:C4) [15:53:11:803]: Decr... Read more

Answer:MBAM Installation Failing with MSI error code 1603

Hi ,

Please kindly understand this is Windows 7 forum. In order to get the answer effectively, I suggest you contact Windows Server Forum for further assistance. Thank you for your understanding. 

Windows Server Forum
http://social.technet.microsoft.com/Forums/en-US/category/windowsserverTracy Cai
TechNet Community Support

5 more replies
Relevance 55.35%

I tried to reinstall windows 7 after installing my new Asus M5A97 LE R2.0 mainboard, but the process stops at 1-2% and throws the 0x8007045D
Error message. I quick formatted and repartitionated the HDD. Still the same error. I tried again after low formatting the HDD with partition wizard,
repartitionated again, still getting Error 0x8007045D.

Also updated my bios, ran chkdsk and partition wizards sector check, which both say the HDD is fine, installed xubuntu and archlinux without any problem, reformatted and repartitioned again, changed my SATA-Controller in BIOS from AHCI to IDE, took out 1 RAM module, tried win 7 professional 64-bit without SP1 and win 7 prof. 32-bit. I ran the Installation Disk in both, UEFI and normal mode (of course with gpt partition table in uefi mode and mbr in normal mode), tried different SATA connectors and cables and burned and tried every single iso at least twice (with different programs).

I'm still getting Error 0x8007045D with every single setup I try.

System Specs:

Mainboard: Asus M5A97 LE R2.0 with BIOS Version 1602
Previous Mainboard: Asrock N68C-S UCC
RAM: 2x2GB DDR3 Dual Channel 1333MHz
Video Card: Gainward Nvidia GeForce GTS 450
HDD: Western Digital WDC WD10EALX-009BA0 1TB
CPU : AMD Athlon II X4 640 4x3Ghz
ODD: Optiarc DVD RW AD-7260S

Also interesting:
When I try to wipe out the disk with diskpart after booting the installation disk, it also throws an I/O Error but I don't know what to do about that.

W... Read more

Answer:Error code 0x8007045D during Windows 7 Professional x64 Installation

Hi,

You covered a lot, so the only thing I can think of is to take the CD/DVD drive out of the equation (although I note you did install a Linux distro using that, in addition to PW).

Download the appropriate Windows 7 ISO here, then use this tool to write it to a 4GB USB flash drive, which also makes it bootable. Insert the drive into a USB2.0 port, and then boot from that and try the installation.

The error is usually an I/O error....although I don't know why you should be able to install a Linux distro and not Windows. Did you install all the motherboard drivers prior to attempting to install Windows 7?

Regards,
Golden

9 more replies
Relevance 55.35%

has any one had this error with windows update please? i ran the troubleshooter and it said it fixed problems for it

Update for Windows 7 for x64-based Systems (KB2387530)

Installation date: ‎22/‎02/‎2011 19:34

Installation status: Failed

Error details: Code 80242016

Update type: Recommended

Answer:Windows 7 SP1 installation Error details: Code 80242016

  
Quote: Originally Posted by brianzion


has any one had this error with windows update please? i ran the troubleshooter and it said it fixed problems for it

Update for Windows 7 for x64-based Systems (KB2387530)

Installation date: ‎22/‎02/‎2011 19:34

Installation status: Failed

Error details: Code 80242016

Update type: Recommended


Read here You cannot configure a Wi-Fi Protected Setup device from a computer that is running Windows 7. Has the cause and possible solutions.

9 more replies
Relevance 55.35%

i just downloaded windows 10 and all of a sudden im getting thie error code 0x0000428 how can i fix it

Answer:Win 10 installation loading issues (error code 0x0000428)

Did you just download it or was it installed?Did it run normally before error began?Did you update drivers after upgrade?Have you done Windows Update after upgrade?What was your original OS?List your make and model number or individual components.Googling the error gave these results:https://www.google.com/search?q=err...As you can see, there are different issues it may pertain to depending on what you have.You need to give more details or begin searching through many possibilities.You have to be a little bit crazy to keep you from going insane.

3 more replies
Relevance 55.35%

I'm trying to load the drivers for a Sony network walkman mp3 player onto my PC which is running xp SP2 (home edition). It's an upgrade from 98. Hardware update wizard reports "cannot install this hardware; an error occurred during the installation of the device. The name is already in use as either a service name or a service display name"I think the problem occurs as a result of not running a "factory fitted" version of XP. I can't see a solution on Support.Microsoft.com, but similar errors messages with other devices appear to have been resolved using Regedit.Any suggestions?

More replies
Relevance 55.35%

I run Windows 7 Home Premium on SSD harddrive.
Windows 7 SP1 installation is failing. Package KB976932 is downloaded successfully but configuring update ends at 30%.

After automatic reboot startup repair shows message that computer is unable to start and a system restore is needed. Windows update shows that SP1 failed with Error code 800F0816.

After unsucessful update new directories in C:\ are created "55f623cd43f97854f8b14861dbf1" or "c44bdde73b255d0992464ebb53" including spinstall.exe.

To see error messages in the following logs in attachment:
- "C:\Windows\Logs\CBS\CBS.log"
- "C:\Windows\Inf\setupapi.dev.log"
- "C:\Windows\winsxs\poqexec.log"
- "C:\Windows\WindowsUpdate.log"

What I have done to solve problem:
- Reinstalled Windows 3 times and installed service pack before other programs.
- Uninstalled Bitdefender antivirus before installation
- I have checked disk for hardware problems with chkdsk /F (CMD).
- I have checked corrupt files with sfc /scannow
- Run Microsoft "Fixit" and repaired window update components.
- I have installed system update readiness tool (Windows6.1-KB947821-v14-x64). I hope this program runs together with Windows update.
- Reninstalled .NET Framework 4.0 manually (dotNetFx40_Full_x86_x64)
- I have also tried clean reboot (msconfig) but since Nvidia display driver is only services beside Microsoft services this seems pointless.

Recent installation to computer:
- Ne... Read more

Answer:Windows 7 SP1 installation failing. Error code 800F0816

You can get support from Microsoft over SP1 issues although whether you'll get help is another matter.

Support for Microsoft Update technical problems - troubleshooting

9 more replies
Relevance 55.35%

My PC had a BOOTMGR problem on boot-up and it wouldn't fix through the command prompt fixes. (fixmbr, rebuildbcd, chkdsk) So I thought I'd do a clean install. I formatted everything on the drive, and continued to do the installation. (Installing Windows 7 Home Premium 64-bit) What ended up happening was, the files were corrupted or missing, but what I didn't understand was that the CD was OEM that came with the computer. The computer had that version of Windows before I formatted.

I was previously having S.M.A.R.T pop up on start-up, prompting me to push F1 to continue, but I disabled it because I thought it was annoying and found no problems with my hard drive until now. I accidentally cut into the S-ATA cord from the CD-Drive to the motherboard, but it's still intact. I thought that was the case, so I tried installing from USB and that didn't work either, ended the same way.

I've tried leaving only one stick of RAM intact (2GB) out of 4GB and taking out the battery on the motherboard, using the VGA output on my old GFX card, none of which solved the problem.

How exactly do I fix this? By fix, I mean let Windows install without any problem.

Specs:
Motherboard: ASUS M4N68T-M V2
Core: AMD Phenom II 840 3.2ghz Quad Core
Graphics: ATI Radeon 5450 (512mb, currently intact)/ATI Radeon 6950 (Not intact, as it doesn't have VGA output)
RAM: 2 x 2GB

(I put this under the wrong category, please fix)

Answer:Windows installation problem Error Code 0x80070017

If you were getting SMART popups then it's quite likely your hard drive is having problems. Run the vendor diagnostic.




Quote:
Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Bootable Hard Drive Diagnostics


Next, replace the SATA cable.

4 more replies
Relevance 55.35%

I assumed that I would find an existing thread on this issue, because it is all over the internet (but without a solution that I can find), but I don't see a thread. If I have overlooked it, I apologize.
Windows Update prompts me to download/install Service Pack 1 for Microsoft Vista (Home Premium). It downloads succesfully, but once the installation begins, I receive the following error:

Code 800B0100 Windows Update encountered an unkown error.

Does anyone have an explaination of this error or know of a fix for it?
Thanks to all in advance for your assistance.

Answer:[SOLVED] Vista SP1 installation error: Code 800B0100

hi this is what i found on ms http://search.microsoft.com/results....ndows%20Update you might take a look at this http://support.microsoft.com/kb/290301

3 more replies
Relevance 55.35%

I have windows 10 build 9860 installed on my computer. the update 9879 downloads but doesnt install properly, give me the error code 0xC1900101 - 0x30018
While searching in the other forums, i have seen lot of questions but no answers in the above issue
i have uploaded the log files setupact.log and setuperr.log in the below link
1drv.ms/1yojLPG
do take a look

Answer:Windows 10 Installation Error Code 0xC1900101 - 0x30018

In this forum, I am a newbie, and as such I am not allowed to post link.
Go to google search, enter Windows 10 build 9879 ISO now available for download.
That will get you the Non-Enterprise Win 10 build 9879 ISO.
Download it and burn it to a bootable DVD.
Use the DVD to do a clean install.

2 more replies
Relevance 55.35%

Hello. I am having the same issues with the Windows 10 upgrade as TheDude has previously reported.  In fact, last I checked the upgrade had made 30 unsuccessful attempts to upgrade.
 
I was thinking - and am a non-technically inclined senior citizen - that when I logon to my system I logon on using an @outlook.com address.  Could it be that my system is waiting for me to log on to a "local" account or something?
 
I tried the creation tool... clicked run and "poof," nothing. I even created a USB flash drive with the upgrade on it using our laptop computer.  But after the install began I was asked for the "product key;" wouldn't you know that the product key ended in AEOEM (or some such characters), but the upgrade told me it wasn't a valid product key.
 
So I contacted Dell... so much for paid support; worthless as teets on a boar hog.  They referred me to Microsoft, who, after keeping me on hold for some time, had me run MSCONFIG, go to the services tab, check hide all Microsoft services, and then hit apply.... Only problem? The MSCONFIG window said "not responding!"
 
The Microsoft tech said for $99 she'd be happy to elevate my tech support for one item for 30 days. I said no thanks, that was too much $$$ when they couldn't even guarantee that whatever they might do would correct the issue.  (Besides, it seems there are many folks encountering the same issues I am with the upgrade, so this can't be "just" my computer.)
 
Equ... Read more

Answer:Installation of Windows 10 results in error code 80070005

Hi ubtchanova Let's see if we can get the upgrade to install on your system. Follow the instructions below please.System File Checker (SFC)Follow the instructions below to run a SFC scan on your system and to provide the CBS log in your next reply;On Windows Vista & 7, click on the Windows Start Menu, then enter cmd in the search box, right-click on the cmd icon and select Run as AdministratorOn Windows 8, drag your cursor in the bottom-left corner, and right-click on the metro menu preview, then select Command Prompt (Admin);On Windows 8.1, right click on the Windows logo in the bottom-left corner and select Command Prompt (Admin);Enter the command below and press on Enter;sfc /scannowNote: There's a space between "sfc" and "/scannow";Once the scan is complete, enter the command below and press on Entercopy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"A file called cbs.txt will have appeared on your Desktop. Upload the file on Dropbox, Google Drive or OneDrive and post the download URL for it here;Note: Please note that the CBS.log is volatile, which means that if you don't upload it after the SFC scan is completed, it won't contains the information from the scan anymore. So archive it and upload it as soon as you can.

11 more replies
Relevance 55.35%

I have Win 8.1 Home in my laptop with AMD A8 4500M 1.9 GHz processor. After downloading Win 10, it did not install with error code 80070003.I ran the WindowsUpdateDiagnostic.daigcab when I got the message, "some registration is missing or corrupt".I downloaded MediacreationToolx64.exe & ran it & got the message "Something happened". This happened three times I tried to download Win 10. Pl. resolve the problem

Answer:Windows 10 installation failure error code 80070003

http://img-9gag-fun.9cache.com/phot...Alternatively, run Microsoft's Upgrade Assistant.How To Ask Questions The Smart Way

8 more replies
Relevance 55.35%

I got a new laptop and i was installing the various important apps and when i tried to install itunes it failed and I received the following error message

.

I looked in Event Viewer and i found this message during the time when i tried to install the latest itunes version (12.7.2.58)
.

So I tried to install an earlier version (12.6.0.95) and it did actually install. However, I received the following errors as i tried to load itunes
.

I'm not exactly sure where to go from here and would appreciate any advice. Thanks!
My issue is nearly identical to this post (iTunes Installation Error - error status 1603 Solved - Page 2 - Windows 10 Forums) but it's a bit old and I wanted to see if anyone has new ideas on how to fix it and why it happened in the first place. I did buy the computer off craigslist but it has worked great and I haven't encountered any other issues.

More replies
Relevance 55.35%

I execute the gateway install package from an elevated admin command prompt but still get this error , any other suggestion ?

More replies
Relevance 55.35%

One day turned on my PC and i tried to open Skype and Mozilla Firefox but that gave me an error saying something about one of the disks corrupting ( i had like 6 Local Disks ) so i decided to factory reset and i didn't need anything that was left on the PC so why not i said then i proceeded doing the installation i got to the formatting and selecting where your windows go screen so formatted all of the 6 disks i formatted disk C once and for some reason it still had 32 GB on it so i formatted it twice and the second time took a little longer which i couldn't wait so i restarted the PC mid way formatting disk C and the PC boots on fine but all parts of the windows installations go super slower after i selected my language and the part after that it says Setup is starting... for like 60-120 mins or more after that i get the normal formatting and select where installing your windows i select disk C and it proceeds to the screen that says Copying windows files 0% but that's where it is stuck then it is staying at 0% for like 60-120 minutes till it gives this error.
Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error Code: 0x80070057
If you need more information just ask!

Answer:Very Slow Windows 7 Installation with Error Code: 0x80070057

Hello and welcome Lazor PC mate for starters it would be best to remove all the drives except the one you want as the boot drive one - I mean just unplug the data cables (SATA) on the others and then try this tutorial way of installing it is the freshest version of whatever version you have on the machine. Br careful to pick only the version you have already because some smart A's try to go to a higher version and then get grief +++++++ when trying to activate using the original code.

Might I make a suggestion that if your budget can stretch to a SSD then it is by far and a way the way to go.

Clean Reinstall - Factory OEM Windows 7

5 more replies
Relevance 55.35%

Hello, I've currently got XP and i've downloaded Vista of the Windows Marketplace to upgrade to and when I start the setup I get this error: "Windows was unable to create a required installation folder. Error Code: 0x8007000B" Any ideas on how to fix it?
 

Answer:Solved: Vista Installation ~ Error Code: 0x8007000B

10 more replies
Relevance 55.35%

As this is my first post here, I'd like to say "hello" to everyone

I have reached the point where I'm forced to say I don't know what to do
Yesterday I plugged my SSD and installed the OS, everything seemed to be fine, at least until I tried to install Nokia Suite. I got this:


I tried to run MS fixit thingies, but they won't even start because of that very same error

I didn't enable Windows Update at all, but the service (along with BITS) isn't disabled.

The MS' System Update tool did nothing and many errors still remain unfixed.
Please look into my problem. I can't use my phone properly and I seriously fear that I won't be able to install something in near future because of that.

I also get 0x80131700 and 0x80070490 when I'm trying to run network troubleshooters. My wired connection has been set as "public" and I can't change that because OS tells me I'm not connected to any networks (and since I'm writing this post on the PC/OS that requires some help, it seems like Windows is quite wrong...).

I'm open for any suggestions and every "do this / do that" as I want to know what's the culprit and I don't want to use the "last resort" option since I'm not sure the problem will not show up someday.

Answer:Installation problems, persistent 0x800b0100 error code

You appear to have some major corruption arising from a single update/install.... (KB2639308)

Code:
Summary:
Seconds executed: 42
Found 342 errors
CBS Registry Error Total count: 340
CBS Watchlist Package Missing Total count: 2
I think I'd try to side-step the issue, and use System Restore to go back to a time before that update was installed, and see if that resolves the situation.

5 more replies
Relevance 54.94%

Installation of Microsoft Visual C++ 2008 fails everytime on my PC. It stops on the very first step (Runtime Pre-requisites). When I took a look at the error report, I found out that the error code was (Can you believe my luck!) 1603. It just means "Fatal Error during installation" (Or does it?).

After this, I tried to intall this software after uninstalling VC++ 2005 and deleting all of the related files too but it didn't work either. I gathered from the installation log that the installation just did diddly-squat at the very first step. Anyway, I am attaching the installation logs for analysis. Please help me!
 

Answer:Visual C++ installation fails with error code 1603 in Vista.

Bump.
 

1 more replies
Relevance 54.94%

Hey guys, I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times. Has anyone else had this problem, and how would you advise to fix it?
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor

Sorry if this is in the wrong place, but I'm at wits edge

Answer:Black screen after Installation (Error Code 8007002C-4000D)

TeaAddiction said:

Hey guys, I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times. Has anyone else had this problem, and how would you advise to fix it?
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor

Sorry if this is in the wrong place, but I'm at wits edge



Hi @TeaAddiction

Can you access the Event logs and show us the installation errors? You can use > Event Viewer - Open and Use in Windows 7 - Windows 7 Help Forums for a quick access guide.

Can you also paste the contents of a file in "%WINDIR%\WindowsUpdate.log" so we can see where it is failing?

21 more replies
Relevance 54.94%

OS is Win 7 Home Prem 64-bit. Cannot install SP1, and one of the .Net 3.5.1 updates (KB2656355 and KB976932). Get Error: TRUST_E_NOSIGNATURE(0x800b0100). Have tried many of the suggs, but can't seem to lick this. After running SURT, looking at the CheckSUR.log, it appears that a third KB is mucking it up (KB2416471)??

Tried the sugg at How to fix errors found in the CheckSUR.log, dropping the appropriate .msu (KB2416471) WU file in the C:\Windows\Temp\CheckSUR\Packages folder, like it suggests, and re-running SURT, but the CheckSUR still indicates the same problems. Saw on this forum where many have had success by someone issuing zipped packs, but are specific to individual user's problems (I assume the specificity of the fix has to do with what is in the zipped file?). Hoping I might be as lucky .
Have attached the latest CheckSUR.log.

Also - not positive (it's a client's machine), but I believe this machine was in-place upgraded from Vista Home Prem to 7 HP. I think that may have something to do with it?? Shame on MS if that is the case.

Any assistance would be greatly... HUGELY appreciated!!!

Answer:Service Pack installation failed with error code 0x800b0100.

Hello pbowles3 and welcome to the forums

Was it my zip files that you saw by any chance? Yes, these issues are specific to the user that I'm helping. This should be a 5 minute job, but I've had all sorts of curveballs in the past.

Before we continue, I need to know whether the computer is x86 or x64?

Dropping the .msu file in that folder will do nothing whatsoever I'm afraid, it doesn't say to do that in the link that you provided either:






Quote:
All files of type *.mum and *.cat should be placed in the %WinDir%\Temp\CheckSUR\Packages directory
All files of type *.manifest should be placed in the %windir%\temp\CheckSUR\manifests directory



Just so I don't have to download it again:


Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 16.0
2012-11-01 21:49

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB2416471~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB2416471~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB2416471~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB2416471~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Cor... Read more

7 more replies
Relevance 54.94%

Hello!

I keep getting this error update, and I have tried every suggestion I could find on the Microsoft site.

I ran the system Update Readiness Tool, and CheckSUR.log reports the following information






Quote:
Unavailable repair files:
winsxs\manifests\msil_system.xml.resources_b77a5c561934e089_6.1.7601.18529_en-us_4ba39f6adcb8ffa6.manifest
winsxs\manifests\amd64_netfx-system.xml_b03f5f7f11d50a3a_6.1.7601.18529_none_61525d543c29f632.manifest
winsxs\manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7601.18529_en-us_6685ac8c75cac403.manifest
winsxs\manifests\msil_system.data.sqlxml_b77a5c561934e089_6.1.7601.18529_none_05d526a261a2bd9d.manif est
winsxs\manifests\amd64_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.22740_none_89d49b0dbca4315e.manifest
winsxs\manifests\msil_system.xml_b77a5c561934e089_6.1.7601.22740_none_3f3239201f9a7e81.manifest
winsxs\manifests\amd64_netfx-sos_dll_b03f5f7f11d50a3a_6.1.7601.18529_none_a09f7455a2ff8502.manifest
winsxs\manifests\amd64_netfx-system.data.sqlxml_b03f5f7f11d50a3a_6.1.7601.22740_none_fd50d2123d55f0a6.manifest
winsxs\manifests\amd64_netfx-system.data.sqlxml_b03f5f7f11d50a3a_6.1.7601.18529_none_141bab5a23b1444a.manifest
winsxs\manifests\amd64_netfx-system.xml_b03f5f7f11d50a3a_6.1.7601.22740_none_4a87840c55cea28e.manifest
winsxs\manifests\msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22740_en-us_f0063b6d4da03da4.manifest
winsxs\manifests\msil_mscorlib... Read more

Answer:Persistant Installation Error Code 80073712 for KB2972211 (Windows 7)

i did a google-search for "error code 80073712", which you posted, and came up with this:

Windows Update error 0x80073712

the webpage says to resolve the problem by running "system file checker".. here are the instructions:

Open an elevated command prompt.
Run the "sfc /scannow" command.
Try to install update again.

9 more replies
Relevance 54.94%

Hello, i have a Satellite L850-1v3 Laptop and accidentally i destroyed my Hard drive

Now, i'm trying to install Windows 8 in a new hard drive but it always get stuck on 89% and this error code come up "0xC0000005"

I have tried with different Installation discs, through CDROM, usb etc

What should i do?

Another question that comes up, is "where can i find my Windows 8 serial key?"

Thanks :)

Answer:Satellite L850 - Error Code 0xC0000005 during Win8 installation

Do you try to install original Win8 64bit version that you got with your machine?
Have you bought brand new HDD?

2 more replies
Relevance 54.94%

Hi All,

I'm hoping someone will be able to help!

I believe I have a genuine copy of Windows 7 home premium as I've been using it without problems for the last year. I've recently installed a new gigabyte motherboard and i5 processor so decided to do a clean install of windows 7 using my original disk. It all installed okay but after a few days windows 7 expired and every time I've tried to activate by typing or phoning with my original product key I have been unsuccessful. It says a problem occurred when windows tried to activate, Error Code 0x80072F8F.

I've also tried ligit check and got the following report using the diagnostic tool.

Thanks in Advance

Diagnostic Report (1.9.0019.0):
-----------------------------------------
WGA Data-->
Validation Status: Invalid License
Validation Code: 50
Cached Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-46GGD-QGJ8F-VW7P9
Windows Product Key Hash: 3HBK1e5aZ3UJA5tON5m22RRWnWI=
Windows Product ID: 00359-OEM-9827995-50578
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {B930CF05-F78B-4E73-B452-39FC452B3E51}(3)
Is Admin: Yes
TestCab: 0x0
WGA Version: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x... Read more

Answer:Windows fresh installation issue Error Code 0x80072F8F

It says this is an OEM copy of Win7. Did you buy an OEM retail copy or are you reinstalling Factory OEM?

7 more replies
Relevance 54.94%

Hello, I formatted my notebook yesterday, and I couldn't install Power Management software correctly. When installation is complete, i get "Irrecoverable error. Program will be closed. Code: 0x7E"

Can anyone help me please?

Answer:Satellite P30-128: Power Management installation error code: 0x7E

Hi Simone

In this forum you will find many topics about this power saver error. Try to use the advanced search.
Generally this error occurs it the user doesn't use the Toshiba recovery CD but only the original Microsoft OS.
But According to other topics there is no explicit solution.
It's very important that you will install the Toshiba drivers in the right order.
Check the installation instruction on the Toshiba driver page.

1 more replies
Relevance 54.94%

I had to remove AVG from the system as there was a virus problem that I dealt with, but now when I try to install a new version of a AVG - I keep getting an installation errror code 0xC0070643 - MSI Engine failed to install the product. Problem with Windows Installer.

Can I please get some help with this. Can I fix Windows Installer if there is a problen with XP?

Logfile of Trend Micro HijackThis v2.0.5
Scan saved at 4:48:23 PM, on 8/23/2014
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)

Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\EssentialPIM\EssentialPIM.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Outlook Express\msimn.exe
C:\Program Files\Windows Media Player\wmplayer.exe
C:\Documents and Settings\Compaq_Owner\Desktop\Windows XP Utilities\HijackThi... Read more

Answer:Installation Error Code 0xC0070643 - Problem With Windows Installer

Logfile of Trend Micro HijackThis v2.0.5
Scan saved at 4:48:23 PM, on 8/23/2014
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)Click to expand...

Why is your computer running Windows XP SP2?

The SP3 upgrade was released in May 2008.

The operating system in that computer is over 6 years out of date.

----------------------------------------------------------
 

3 more replies
Relevance 54.94%

When attempting a clean install i receive and error after clicking 'Install Now' (step 3). It reads

Windows cannot open the required file D:\sources\install.wim. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007000D

I've searched the forums a bit and haven't found any other posts about this error. I've tried installing both the 32 and 64 bit versions, same issue for both. Help please!

Edit: i'm attempting the clean install on my old vista 32bit laptop, not my windows 7 desktop.

Edit #2: when i attempt to run the 32bit setup file while in vista it immediately opens a window that says 'windows installer has stopped working'

Answer:Installation error code: 0x8007000D cannot open D:\sources\install.wim

This is with the Build 8102 Windows dev Preview download?

What do you have the installation media on...a USB drive, a DVD, etc?

Possible maybe the downloads were corrupt? Try downloading one again and try that one. Or stick on different device USB, DVD, drive, etc..and try.

Also might scan your HDD/SSD you're trying to install it to for any possible defects.

2 more replies
Relevance 54.94%

Error code 2755 when attempting installation for any product.

I am getting Error 2755 when attempting to install or during installation of Java as well as a few other products I have tested as a cross-comparison to this error.

Upon attempting installation it states "The system cannot open the device or file specified."

When you click "Cancel" it states: "The installer has encountered an unexpected error installing the package. This may indicate a problem with this package. The error code is 2755."

The computer has Windows XP with SP3 and is fairly up to date, 99.9%. I need some ideas or help in fixing this. I am busy trying to search out some items but I'm hoping someone has fixed this before.

Thank You for yor input
 

Answer:Solved: Error Code 2755 when attempting installation of products...

Ok, if you want the short version... skip the links I posted for reference and just follow the steps. Its about 5 minutes or less depending on your machines stability and ability to compute your moves. I recommend you to reboot your computer in between steps and before you begin be sure to create a System RESTORE point as well.

This was written using XP, your system will vary slighty but not much. And YES, this is the broad basics.

Two things first...

Find out what version your MSI installer is and if it needs updating. NOTE: i would have guessed you would of received a different code or error if you just needed an update!?. Such as a message stating to be out of date; needs updating; is corrupted; etc.. i'm failry sure it works this way too. I was also getting an error 2755 when attempting a JAVA install. This turned out to be related to the "Windows Installer" not being set to Automatic and/or the service Started!
1.) --> Start --> Run --> type "Msiexec" (Case insensitive and without quotes))

Should this attempt not work, Microsoft lists the long run around to this as ...--> Start --> Run --> type either "command" or "cmd", and at the command prompt enter the "Msiexec". In either case read the information posted in the box, if any all you will need is the version number.

This machine had stated "V 3.01.4001.5512" which as of September 10, 2010 a new version was released to which this m... Read more

1 more replies
Relevance 54.94%

I've seen several entries regarding sp1 instalation errors, but none with this one: falat error c0000034 applying update operation
 
Machine is x64 (intel core i7), with 8gb mem
 
tried installing sp1 via windows update. there were three patches to install, one of them, sp1
 
did the two first, before, and then tried sp1.
 
It failed while rebooting (not remember the code, sorry), but i was able to do a system restore to pre-sp1.
 
them, got the full SP1 media from msdn, and did install it in offilne mode. Setup looked faster (of course?) and in reboot, this fatal error c0000034 appeared. But this time, no option for system restore.
 
if i try to enter in safe mode, i get stuck on driver loading (last loaded is classpnp.sys)
 
if i try to run, as seen in other threads, the sfc tool, i get a "there is a system repair pending which requires a boot to complete..." Of course, reboot just gets me to the 34 error.
 
As i cannot get to Windows, no InPlace setup is available...
 
So, i read about DISM could be used as a before-last resourt... How? I'm not sure what this error is, so i'm a bit lost about getting something out of DISM to correct it.
Any help?

Answer:Windows 7 Ultimate SP1 installation fails with error code c0000034

thiswoot,
Thank you for posting and wanting to help other users, but unfortunately, I had to delete your post. We have found that the steps in this post while allowing you to recover from the non-bootable state, leaves the machine in an unserviceable state, with SP1
partially installed.  There is not a known way to recover a machine from this state at this time, so we recommend that people follow the steps in the KB article which allow you recover the system with Windows SP1 installed successfully. So as not to leave
customers in state which is not serviceable, your post was removed.
 
KB article with steps to resolve the issue:
975484  Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after you install Windows 7 Service Pack 1
 http://support.microsoft.com/default.aspx?scid=kb;EN-US;975484
 
We also have a blog post on the issue with more details of why the deleted steps should not be attempted:
http://blogs.technet.com/b/joscon/archive/2011/03/11/why-you-don-t-want-to-edit-your-pending-xml-to-resolve-0xc0000034-issues.aspx

Thanks
-Tony MannIT Pro Audience Manager for Web Forums

more replies
Relevance 54.94%

Hello, I just installed and activated my windows 7 yesterday on my new SSD drive. So far I am very happy with my upgrade, but for one problem. I can not update at all. Since yesterday I have tried five times with no success. I keep getting the same error message; Error Code 80224402C. I am using AVG as my virus software. Thinking it may be interfering with the update I disabled it and the win7 firewall. The results were the same. You assistance with this problem will be appreciated. Thank you.

Answer:Unable to Update; Error Code 80224402C. New installation and 7 user

IF this is windows updates your speaking of then follow :
1. Windows Update - Reset
2. Run the attached tool
3. If problem still exists use this : Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2012] - Microsoft Download Center - Download Details
Report back with how it goes.

9 more replies
Relevance 54.94%

Hi there,

at the moment i'm trying to install the sp2 for office 2010 64bit via windows update and it fails every time. During the installation it asks for the file ProPlusWW.msi and i'm pointing to the file in the x64-folder on the dvd. Shortly after that the installation quits with code 8024002D 'Unkown error in windows update' (see attachment).

PS: like the picture shows its a german installation

I hope somebody can help me

Answer:Office 2010 64bit: error code 8024002D during installation SP2

I also tried to install via downloading the sp2 (officesp2010-kb2687455-fullfile-x64-de-de.exe) but this fails also. The problem here is that it only shows a message box (Error during installation of the package.) without any code/error-number.

5 more replies
Relevance 54.94%

Hello,

I recently got a new laptop, which worked perfectly fine until a while ago. A few minutes after startup, the error message 0xc000021a would pop up, making the pc reboot. I tried finding a solution for this on the internet, and found a one on Windowsinstructed's site, which suggested to start the pc in safe mode, and execute the following two commands:

- DISM /image:C\ /cleanup-image /revertpendingactions
- move C:\Windows\WinSxS\pending.xml C:\Windows\WinSxS\pending.old

I proceeded to do these steps and restarted my pc, however, this did not resolve the problem afterwards, so I refreshed windows 8 using advanced options. This fixed the problem, but after I installed everything I needed again (and removed everything I didn't need, like some Acer applications and some bloatware), this error popped up again.

Is there any way I can easily see what is causing the problem without needing to tediously check programme after programme what is causing the error? I can just refresh the OS again and not install any of those programmes, but most of them are essential for me.

The things I installed after refreshing were:

-Start8
-Google Chrome
-Comodo Antivirus
-Microsoft Office
-Modernmix
-utorrent
-Steam
-Winrar

Thanks in advance!

Answer:Error code 0xc00021a, installation of file causing problem

Hi and welcome to TSF we could use some info on what you removed and what you used to remove it, since you did this before and it is now repeating the issue, it indicates you may have removed something which had a shared use.

6 more replies
Relevance 54.94%

So I have a server that is running a WDS server in which we have made images for a computer lab in the past. I recently have been working on setting up a new image, and I sysprepped and captured it from a computer. After uploading it to the server then
attempting to install it on a client PC, it will expand files until 99% then give me an error "Windows cannot install required files....error code: 0x80070714. I have mounted this image through imagex to check if there were any lingering file problems,
and did not find any. I took a default installation wim from an Enterprise disc and installed that through the server which worked fine. I even recaptured the image from the same computer to see if it was corrupted. I am unsure of what else to try. Thanks
for any help

More replies
Relevance 54.94%

Hi Members, my computer was attacked last week with some kind of virus. First I could not download any updates, but after running some Malware tools, I was able to download all the important and optional updates from Microsoft.
One thing I did (mistake) was to uninstall MSE when working on it, in the hope that I would be able to re-install it.
These are some of the virus I found, Trojan.Vundo and also Trojan.P2P.worm, I am going to paste all the logs from the tools I run on the machine down here:
Please help anyone.
I have used all the tools from bleeping to clean any old antvirus(which I have never had since back 2007), the computer is updated but, I cannot get to install MSE.
 
 
 
 
 
 
 
Farbar Service Scanner Version: 16-02-2014
Ran by IKE (administrator) on 20-02-2014 at 12:16:06
Running from "C:\Users\IKE\Downloads"
Microsoft® Windows Vista™ Home Premium  Service Pack 2 (X86)
Boot Mode: Network
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
IE proxy is enabled.
 
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
The start type of SDRSVC service is... Read more

Answer:Windows Vista 32 error code 0x80070643 "Cannot complete the MSE installation"

Please download TDSSKiller exe version to your desktop. Double-click on TDSSKiller.exe to run the tool for known TDSS variants. Vista/Windows 7 users right-click and select Run As Administrator.Click on Change Parameters and click Detect TDLFS File System.Click the Start Scan button.Do not use the computer during the scanIf the scan completes with nothing found, click Close to exit.If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.Note: If Cure is not an option, Skip instead, do not choose Delete unless instructed.A TDSSKiller text file would be saved in Local Disk C.Copy and paste the contents of that file in your next reply.ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Clean.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.Please download Junkware Removal Tool to your desktop.Shut down your protection software now to avoid potential conflicts.Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administra... Read more

15 more replies
Relevance 54.94%

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

Answer:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

9 more replies
Relevance 54.94%

Hello!
Running windows 7 64 bit, amd 965 cpu. If you need more info about specs, ask me. I am encountering "Error code 2203" while installing. It fails to install and I've tried running as admin, windows xp compatibility, and everything. In the event viewer there is also KERNELBASE.dll, xamlparse, and mscorlib errors.
 

 
I do not know how to fix this and I'm fairly competent with computers.
 
Thank you.

Answer:"Error code 2203" while installing .net framework and other installation issues

Please download MiniToolBox  , save it to your desktop and run it.
 
Checkmark the following checkboxes:
  List last 10 Event Viewer log
  List Installed Programs
 List Users, Partitions and Memory size.
 
Click Go and paste the content into your next post.
 
Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link.  Do not copy/paste data from the report.
 
Louis

1 more replies
Relevance 54.12%

I am running Vista Home Premium pre-installed omn my ASUS Laptop. It will not install the update for Microsoft SQL server 2005 Express edition Service Pack 2 (KB921896). I get error code 2B26.
can anyone help? it says it is an important update.

Answer:Error Code 2b26 With Vista Update Installation Off Kb921896 Sql Server Sp2

I am running Vista Home Premium pre-installed omn my ASUS Laptop. It will not install the update for Microsoft SQL server 2005 Express edition Service Pack 2 (KB921896). I get error code 2B26.can anyone help? it says it is an important update.Has anyone come up with a solution for this yet? I'm running Vista Biz & I still get this problem even now: Feb 08

1 more replies
Relevance 54.12%

I am working on a client's laptop, and have been unable to update to Service Pack 1. Stand-alone manual installer results in error 0x800f081e

I have also run the System Update Readiness Tool, and this is the most recent log:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2016-12-23 17:24

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) CBS Registry Error 0x80070002 Package_for_KB2695962_SP1~31bf3856ad364e35~amd64~~6.1.1.0 failed to get Visibility

Checking Component Store

Summary:
Seconds executed: 531
Found 1 errors
CBS Registry Error Total count: 1

More replies
Relevance 54.12%

Hi There
 
Any help with the above mentioned error? Donwloading service pack 1 but get the above mentioned error.
 

More replies
Relevance 54.12%

Following the Windows Update Posting Instructions I have met a difficulty in that I see the maximum zip file upload is limited to 8MB. My CBS.zip file is 27.2MB and I would appreciate advice of any steps I should take before proceeding further.

I have installed the System Update Readiness Tool and the installation of KB976932 fails with the display of error code: 8024200D.

Answer:Windows 7 Home Premium Installation SP1 Fails Error Code:8024200D

This image shows the contents and file sizes of my CBS folder
Attachment 268353

7 more replies
Relevance 53.71%

So here's the lowdown:

My PC used to run Windows 7 Ultimate (but it wasn't Genuine). To prevent any potential future problems with Windows 10 from Windows 7 Ultimate not being Genuine, I reverted back to Windows 7 Home Premium which I had my product key laying around for.

I did a clean install to make things feel fresh. I backed up all my personal files and stuff to a second partition I made on my 1 TB HDD.

After the clean install I downloaded every update available from Windows Update (including the Microsoft updates). I didn't install any programs or drivers yet, except for my Ethernet driver (as well as any found by Windows Update) so I could download the Windows Updates and Activate Windows 7 Home Premium so it's Genuine. I figured having a more bare-bones OS would cause less compatibility issues with the Windows 10 upgrade. Then I reserved the Windows 10 upgrade in the Get Windows 10 app.

After that, I tried nearly every trick in the book to upgrade to Windows 10 because I didn't want to wait really. The first thing I did was download the Media Creation Tool and used the "upgrade this PC now" option. Everything went without a hitch but then after the first reboot the installation hung at a black screen with a light blue Windows logo.

I figured I just had to wait (even though I saw no light for my hard disk activity), so I dozed off. When I woke up, about 6 hours later... nothing happened.

I tried testing my luck with another upgrade option instead. I used... Read more

Answer:Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

Bump, still need help.

(this is not a useless thread bump. My issue hasn't seen a single reply in 5 days. To prevent it from getting buried, this was necessary)

13 more replies
Relevance 53.71%

So here's the lowdown:

My PC used to run Windows 7 Ultimate (but it wasn't Genuine). To prevent any potential future problems with Windows 10 from Windows 7 Ultimate not being Genuine, I reverted back to Windows 7 Home Premium which I had my product key laying around for.

I did a clean install to make things feel fresh. I backed up all my personal files and stuff to a second partition I made on my 1 TB HDD.

After the clean install I downloaded every update available from Windows Update (including the Microsoft updates). I didn't install any programs or drivers yet, except for my Ethernet driver (as well as any found by Windows Update) so I could download the Windows Updates and Activate Windows 7 Home Premium so it's Genuine. I figured having a more bare-bones OS would cause less compatibility issues with the Windows 10 upgrade. Then I reserved the Windows 10 upgrade in the Get Windows 10 app.

After that, I tried nearly every trick in the book to upgrade to Windows 10 because I didn't want to wait really. The first thing I did was download the Media Creation Tool and used the "upgrade this PC now" option. Everything went without a hitch but then after the first reboot the installation hung at a black screen with a light blue Windows logo.

I figured I just had to wait (even though I saw no light for my hard disk activity), so I dozed off. When I woke up, about 6 hours later... nothing happened.

I tried testing my luck with another upgrade option instead. I used... Read more

Answer:Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

Bump, still need help.

(this is not a useless thread bump. My issue hasn't seen a single reply in 5 days. To prevent it from getting buried, this was necessary)

13 more replies
Relevance 53.71%

microsoft says i need to update .NET framework 1.1 sp1 security update. i've tried to update several times unsuccessfully. microsoft online assisted support said to uninstall all versions of .NET framework and then download and install all versions again. i have 2.0/sp2, 3.0/sp2, and 3.5/sp1. i joined computer hope as "familiar" but am little more than a beginner. any help or suggestions would definitely be appreciated. thanks.

Answer:microsoft .net framework 1.1/service pack1 installation failure error code 0x643

Your post is not clear - did you or did you not completely uninstall .net and then try again?

14 more replies
Relevance 53.3%

I get an error every time when I try to install important updates. I get an error code 80070BC9.  Also ever since I have had my new computer I can never install programs such as itunes,sony vegas, and i cant even install microsoft redistributable packages and it tells me i need it and i cant install dotnet stuff either. And I get error 1935 when installing those kind of programs. PLEASE HELP!!! Here is the update history for one of the updates that failed there are 4 more.Microsoft .NET Framework 3.5 SP1 Update for Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB982526)Installation date: ‎12/‎4/‎2010 9:09 PMInstallation status: FailedError details: Code 80070BC9Update type: ImportantThis update addresses a set of known issues of the Microsoft .NET Framework 3.5 Service Pack 1. After you install this item, you may have to restart your computer.More information: http://go.microsoft.com/fwlink/?LinkId=190967Help and Support: http://support.microsoft.com

Answer:Windows Update Error Windows 7 Error Code 80070BC9 and Installation Errors

Check or see this thread --> http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/2a2e6aae-e29d-45ee-b000-bf51ded07661

10 more replies
Relevance 52.48%

Working on an HP Inspiron w/Vista home Premium - currently has SP1, but SP2 failed to install. Since Windows Update would not detect SP2 again, I went to Microsoft.com and downloaded it. When I ran the update, I am getting an error code of 0x80041013 "Unknown error" - anyone else encounter this error?

Thanks!

Answer:SP2 installation error code of 0x80041013 "Unknown error"

1.Try install SP2 in safe mode
2.If point 1 fail then try reset WU in aggressive mode How do I reset Windows Update components?

If nothing help:

It would be also issue with WMI or with event viewer or task scheduler

Can you open event viewer?

Start>>Search>>eventvwr.msc

and can you open task scheduler?

Start>>Search>>taskschd.msc

3 more replies
Relevance 50.02%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 50.02%

Hi guys. I wanna update my .net framework with an offline installer, but this error always shows up. I tried finding some fix but not even a single one worked. So I was hoping that maybe you could help me with this.


Here's the log file;

OS Version = 6.1.7600, SP = 0.0, Platform 2
OS Description = Windows 7 - x86 Home Premium Edition

MSI = 5.0.7600.16992
Windows version = x86_windowsfoundation_31bf3856ad364e35_6.1.7600.16385_none_03103096f1ed527c.manifest
Windows servicing = 6.1.7601.17592
CommandLine = C:\2e69eb4c536bb227491ce8da2c311f\\Setup.exe /x86 /x64
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft .NET Framework 4.5 Setup
Package Version = 4.5.50709
User Experience Data Collection
Number of applicable items: 9
Exe (C:\2e69eb4c536bb227491ce8da2c311f\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupUtility.txt
ServiceControl operation succeeded!
ServiceControl operation succeeded!
Exe (C:\2e69eb4c536bb227491ce8da2c311f\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupUtility.txt
MSI (C:\2e69eb4c536bb227491ce8da2c311f\netfx_Full_x86.msi) Installation failed. Msi Log: Microsoft .NET Framework 4.5 Setup_20150414_235007774-MSI_netfx_Full_x86.msi.txt
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:03:10).
But bef... Read more

Answer:.NET Framework 4.5 "Installation failed with error code: (0x80070643)"

From your post.





Quote:
OS Version = 6.1.7600, SP = 0.0, Platform 2


You need to use Windows 7 Update and install SP-1 first. SP-1 should read 6.1.7601.

7 more replies
Relevance 50.02%

I have a fully functioning Windows 8.1 machine, genuine, activated that works without any issues.

The problem is the fact that I cannot install Windows 10 because update fails every time; disregarding occasional failures during download process, the only error I get is at one specific point and that is in "Preparing for Installation" phase when the bar reaches around or exactly 75%. And the error code is: 80070003 (in Tech preview this error was 0x80070003). A lot of people are reporting this on Microsoft's support website and have the exact problem as I with exact results and some of them have tried exact things as I, but none worked.
Here is how it would go (and what I'd see):

I would right click the Update to Windows 10 icon and click on Go To Windows Update, from there I would start Windows 10 update download.

Windows 10 download would successfully download and reach the point Preparing for installation.
During the process I would notice that a new SoftwareDistribution folder has been created (or just that Download folder has been filled - before I tried removing the entire SoftwareDistribution folder and only resorted to cleaning the Download folder).
The Download folder would be filled with Windows Update files and folders.
In the Windows partition, there would be another folder called $Windows.~BT. This folder seems to be created with the update to Windows 10.
The $Windows.~BT folder would be filled with installation files for Windows 10.
At so... Read more

Answer:Windows 10 Error Code: 80070003 During "Preparing for installation"

To this point have you tried any hardware fix. Maybe take out a stick of ram or use your mb onboard graphics. Used to work awhile ago on win 7. Havenot seen it for 10 so just a shot in the dark. Lots of users have just kept trying and had good luck. Keep trying to upgrade windows 8. Good luck to you.

17 more replies
Relevance 49.2%

The light weight gateway is being installed on windows server 2008 R2 sp1 domain controller.
=== Verbose logging started: 10/30/2016  15:52:44  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Users\adintg\AppData\Local\Temp\{9D17F9BE-88D6-4AB6-A188-6008DA2407AA}\.be\Microsoft ATA Gateway Setup.exe
===

MSI (s) (20:B0) [15:52:49:364]: Executing op: ProductPublishClient(,,)
MSI (s) (20:B0) [15:52:49:380]: Executing op: SourceListRegisterLastUsed(SourceProduct={4632A5E2-B516-4D6A-824F-9B579B604A85},LastUsedSource=C:\ProgramData\Package Cache\{4632A5E2-B516-4D6A-824F-9B579B604A85}v1.7.5402.41928\)
MSI (s) (20:B0) [15:52:49:380]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (20:B0) [15:52:49:380]: Specifed source is already in a list.
MSI (s) (20:B0) [15:52:49:380]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (20:B0) [15:52:49:380]: Adding new sources is allowed.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedSource to: C:\ProgramData\Package Cache\{4632A5E2-B516-4D6A-824F-9B579B604A85}v1.7.5402.41928\.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedType to: n.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedIndex to: 1.
MSI (s) (20:B0) [15:52:49:380]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=55531884)
MSI (s) (20:B0) [15:52:49:380]: Doing action: RemoveExistingProducts
MSI (s) (20:B0) [15:52:49:380]: Note: 1: 2205 2:  3: ActionText 
Action ended 15:52:49: InstallExecute. Return value 1.... Read more

More replies
Relevance 49.2%

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

Answer:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

3 more replies
Relevance 49.2%

I have a new Toshiba L550 1C8 computer with Windows 7 64-bit.

The problem is, that I can?t burn my files on my preinstalled PIONEER DVD-RW DVRTD09A DVD-drive !

If I right-click the file and choose ?Send to E:DVD-drive? I got the error code 0X8007045D.

If I use the preinstalled Toshiba Disc Creator I got the error code 380136-24-00000000.

What?s wrong.


Ole.

Answer:Satellite L550-1C8: error code 0X8007045D and error code 380136-24-00000000

Hi,

Try removing the upper and lower filters to restore functionality.

Instructions: http://support.microsoft.com/kb/982116

2 more replies
Relevance 48.38%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

Answer:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Relevance 47.15%

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

Answer:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

1 more replies
Relevance 47.15%

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

Answer:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

2 more replies
Relevance 47.15%

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

More replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 47.15%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.













Solved!

Go to Solution.

Answer:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Relevance 45.1%

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

More replies