Computer Support Forum

how do I fix error 646

Question: how do I fix error 646

How do I fix error 646

Relevance 100%
Preferred Solution: how do I fix error 646

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: how do I fix error 646

You have provided no information whatsoever. What programme, system specs etc.

2 more replies
Relevance 26.65%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Relevance 24.19%

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

Answer:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

9 more replies
Relevance 24.19%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Relevance 24.19%

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

More replies
Relevance 24.19%

i have not been able to solve this one for a particular user.

skydrive pro stopped syncing. it produces the error in the title. i did some googling and followed a few fixes with no luck. due to some other office issues, i wiped his machine and reinstalled windows. with a fresh install of windows and office 365 he is still getting the error when syncing skydrive.

does anyone have any idea how to fix this?
 

Answer:Error code=0x80004005; Error source=Groove __ Microsoft SkyDrive Pro Error

1. Clear all browsing history on IE
2. Stop syncing all Skydrive Pro folders (have the remaining folders moved away from the original location to avoid duplicate renamed folders)
3. Run IE as administrator and resync the libraries normally

Those are the only instructions I found that made sense.
 

3 more replies
Relevance 23.78%

I am getting a blue screen after I attempt to login to a pc.

Verification error in wmiacpi.sys (WMD driver error) 20e

wmiacpsi.sys = 152f at B9BAB852F

I have run the Dell diagnostic and everything passed.
This is a Dell laptop latitude D531. Dell just replaced the hard drive about 10 days ago. It worked fine until Monday.

Any any what this may be?

Answer:Blue Screen Io Error. Verification Error In Wmiacpi.sys (wmd Driver Error) 20e

Are you sure of the spelling of the 2nd file name? If so, Google doesn't give any results for it - which is suspicious.The first file name ( wmiacpi.sys ) is a Windows file that's used to help manage the ACPI settings in your system. http://www.bleepingcomputer.com/filedb/wmiacpi.sys-7763.htmlA BSOD error will usually point to the file that the error occured in, but this may not be the source of the error. Here's a link on how to find more info about the BSOD message: http://www.bleepingcomputer.com/forums/top...tml#entry409491Once you locate the .dmp files for the event, you can use this link to generate an analysis of the dump for us to have a look at ( http://forums.majorgeeks.com/showthread.php?t=35246 )

6 more replies
Relevance 23.78%

The error onpage of Dell Start Page Trying to edit weather and the error message shows up. the error message is as follow: Line 2 Chasr 316 Error "HTML" is null osr not an object Code O URL HTTP:www google.com/IG/dell?HL=en&client=Del Would you send me an e-mail with the answer, please.

More replies
Relevance 23.78%

Ive just bought some new memory (TWIN2X4096-8500C5C G), the new memory doesnt seem to work unless I only add one stick, and even with that I get blue screen errors.

So from reading a few pages on teh internet I put my old memory back in, and ran windows driver verifier. Upon restarting I got and keep getting teh following BSOD.

IO SYSTEM VERIFICATION ERROR in wmiacpi.sys (WDM driver error 20e)

[wmiacpi.sys+152f at B7C5C52F]

Answer:Blue Screen IO Error. Verification Error In Wmiacpi.sys (WMD Driver Error 20e)

If the system ran fine...before you added RAM...then you need to see if the new RAM (by itself)...works.The new RAM may not be compatible with your old RAM, in which case the system will run fine with one or the other...but not both.The Driver Verifier tool is tricky to use, I would disregard that effort...for the moment.Remove your old RAM...put the new RAM in...see if the system works properly.FWIW: http://www.bleepingcomputer.com/forums/t/153175/blue-screen-io-error-verification-error-in-wmiacpisys-wmd-driver-error-20e/Louis

14 more replies
Relevance 23.78%

Hi Everyone:
Can you help me with this issue please?
I am building a database in Access 2007, windows7, it works perfectly well on my computer where i am building it; but one feature doesn't work on another computer that also has the OP system and Access version.
when you're working in one form with one record, you click on a button that will open another form and filter the records to show only the profile of the same person. the error message it gives is: Run-time error '3000 ': Reserved Error (-3201); there is no message for this error.
i will show below the code where it debugs. I'd appreciate any help with that.
(Again: it works well on my computer, but gives that message on another computer)

Private Sub Find_in_Bio_Click()
Application.DoCmd.OpenForm "Staff_BioEntry", , , "((([Staff_BioEntry].[Full Name]=""" & [Form_Staff_Activities].[Full Name] & """) AND ([Staff_BioEntry].[DOB]= #" & [Form_Staff_Activities].[DOB] & "#))) AND ([Staff_BioEntry].[Registrant_Type] =""" & [Form_Staff_Activities].[Registrant_Type] & """)"
End Sub
 

More replies
Relevance 23.37%

Hello there. I have been redirected here by jamanji, whom has been most helpful by the way.
My PC crashed a little over a week ago.
Rather than retype everything, I would like to give you the link to my post.
I am not 'Tech' per se, but I would like to try and resolve my problem myself,
To make a long story short... I had error 0xc000000f. I have 2 threads on the subject, but the first thread was useless.( I think)
I read gregrocker's tutorial.
I made a Kaspersky Disc. I have a Pop Up from Kaspersky.
saying if I continue...........

Here are the links.

confused by what type of disc to use

Error 0xc000000f

If you read this...Thank you for your time.

Answer:Burnt out from error error error! Time to go back to Paper.

Ok mate one thing straight up the Kaspersky only requires a CD you can use a DVD but seriously a waste of useable space. Have been using Kaspersky security and tis rescue disk for years now so just the CD mate.

Just follow the prompts when you run the disk. It will boot (of course) but will not need Windows to do anything.

There are other options -

Bootable AntiVirus Rescue CD for Windows: Free Download any are good and again do not require Wndows to run.

If you can get it going then I would try this
http://support.kaspersky.com/viruses/utility < the top scanner TDSS Killer

9 more replies
Relevance 23.37%

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

Answer:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

1 more replies
Relevance 23.37%

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

More replies
Relevance 22.55%

Greetings!

I am having a problem with the above error message (error:syntax.error) when I'm running Firefox.

I have uninstalled Java and reinstalled it, but still the same problem.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8099 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 698475 MB, Free - 580394 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled

Thanks,
Barbara
 

Answer:Error Message error:sytax.error - Firefox

See if you can find help here.

http://www.java.com/en/
 

1 more replies
Relevance 22.55%

Ok so my first problem was what I thought the sasser worm. I researched it online and I can't find any traces of it anywhere now. I ran a few spyware checkers and stuff and I think I may have messed with some registries.

Now I cannot access the internet and heaps of things are stuffing up. I disconnected my internet and upon startup get this.

A "Data Execution Prevention" window that closes "Generic Host Process for Win32 Services".

I press OK and that goes away. I found some suggestions online but none of them seem to work. That's my first problem.

My computer runs fine until I connect my internet. It runs alright for a minute or two before I get this error.

The instruction at "0x00401000" referenced memory at "0x00401000". The memory could not be "written". Which has recently been appearing at the same time as AVG saying a threat has been detected at "C:\WINDOWS\drivers\atimixx8.sys"

After this has come up I can press OK to terminate the stop error, or cancel to debug. Either one does nothing but stops my internet from working, and the internet on other computers in my house (we are all on a network). When I try to heal/move to vault/delete the AVG threat, it says I don't have permission.

I've thought about just formatting, but I have seen people who say that even with a format, the problem still persists.

Please help!
 

More replies
Relevance 22.55%

so i recently had this virus and someone on these boards helped me remove it. ty for that! but after 2 reboots it has come back..and with more errors this time like the explorer and drwatson. and also can you tell me why i have to do "open as" instead of just clicking on text documents? it says access is denied. i didnt do anything to get it again nor did i dl anything. anyway here are my logs any help is appreciated.
Gmer.txt
Hijackthis.txt
DDS.txt

Answer:Csrsc.exe error, Drwtsn32.exe error, explorer error

I have reasons to believe that you have a file infector onboard.
Please visit this website - http://virusscan.jotti.org
Submit the file for a comprehensive scan & then post the results back here.

C:\Windows\system32\cmd.exe

If it's virut, you need to wipe the machine immediately. Do not connect this machine to another one for you will infect that one too

7 more replies
Relevance 22.55%

Just got a new computer and am trying to install my Philips Mini HiFi sytem. Contacted their support centre and they don't know what to do! The stereo system simply plugs into a usb port and plays your audio through their system. The only difference between the system it worked on a few days ago and now is that I am running Windows Professional x64.

The problem:

three things to install:

1. the Philips drivers. Philips support got me to download their drivers for Win XP.

When I install this the error rec'd is: "Install 2.15 setup. While installing drivers Plug and Play error detected. Please reboot and try again". I reboot and try again, same thing.

2. The program "Sound Agent" to run the show. When I install the Sound Agent program, the error rec'd is: "VDI32.exe has encountered a problem and needs to close".

3. MusicMatch to channel the audio through to it. (Seems ok but tells me it's out of date - no biggie I can deal with that).

In Device Manager there is "Unknown Device" listed under System Devices shown to be not installed (the yellow exlamation mark through it). When I try to Update Driver it says, "Cannot Install this hardware. The hardware was not installed because the Wizard cannot find the necessary software".

Finally, whenever I reboot I get the error message: "The QVE bus driver is not detected. Reinstall the Qsound Virtual Audio Devices Bus Enumerator driver".

I have reform... Read more

Answer:A Real Tough One. PnP error, VDI32.exe error and a QVE error. Help Please

Your link is not working, but many things don't have 64 bit drivers. Did the drivers say for XP or specifically for 64 bit?
 

2 more replies
Relevance 22.55%

hii have a t61 and i am experiencing problems with the internal fingerprint reader, when i open the fingerprint software an try to enroll my finger it gives the following error: An Internal error occured (object:clsid-not-found(CID_Bio:iviceCache_Creator))and when i press on details button :error code E7210001 cannot enroll user can any one help me with this i am using windows vista Business SP2 with 2G of ram Cpu 2.0 Core2Duo Thanks

More replies
Relevance 22.55%

My pc reboots for no reason when I try and access my network folders. I get the following errors in Event Viewer.


************************************************** ******

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 31008
Date: 2004/11/10
Time: 07:33:55 PM
User: N/A
Computer: GIGS
Description:
The DNS proxy agent was unable to read the local list of name-resolution servers from the registry. The data is the error code.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6f 00 00 00 o...

************************************************** *******

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 2004/11/10
Time: 02:40:01 PM
User: N/A
Computer: GIGS
Description:
Error code 00000051, parameter1 00000004, parameter2 00000001, parameter3 e12cfe18, parameter4 00008080.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 35 0000005
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 31 00000001
0040: 2c 20 65 31 32 63 66 65 , e12cfe
0048: 31 38 2c 20 30 30 30 30 18, 0000
0050: 38 30 38 30 8080


**********************************... Read more

More replies
Relevance 22.55%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Relevance 21.73%

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

More replies
Relevance 21.73%

hi....
i have promblme , i do not know how to fix it..
i have kodak scnners i1220 plus
i have RD Web Access
the promblme is..
I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message
(Scan Error Error while Scan::0::LEAD Error: Twain source manager no)
and
(Scan Error
Error while Scan::0::LEAD Error: Twain DS is connected to max possible apps)

Knowing that the scanner system has worked to windows xp but when we tray on Windows 7 does not work
why..............
i have pormission administrator and i setup the scnners drivers agine still same problme..
.......
i have windows 7 professional
service pack1
hp compaq 6200 pro MT PC
intel(R) core(TM)i5-2500 CPU @ 3.30GHz 3.29 GHz
4.00 GB
32-bit operating systme

Answer:Scan Error Error while Scan::0::LEAD Error: Twain source manager no

It's possible that TWAIN DSM is missing on your Win 7 machine. You can get it here and try again.

Catherine Sea
Dynamsoft: Provider of version control solutions & TWAIN SDKs

1 more replies
Relevance 21.32%

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:


Code:
Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
Description:
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<EventRecordID>2045</EventRecordID>
<Channel>System</Channel>
<Computer>Snaski-PC</Computer>
<Security />
</System>
<EventData>
<Data>19:08:21</Data>
<Data>‎25/‎12/‎2013</Data>
<Data>
</Data&... Read more

Answer:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* ... Read more

7 more replies
Relevance 21.32%

I've just install windows 7 home premium 64bit and got 4 times of BSOD.

for the first time error code is 0x0000001a
for the 2nd time error code is 0x0000003b
for the 3rd time error code is 0x0000003b
for the 4th time error code is 0x000000d1

I also attach minidump files and text files that I got from sf dianostic tool.



And another problem is I try to follow the instruction in this thread
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
and now I cannot start the normal window, I have to run in safe mode with network.



in the reply #4 that zigzag3413 post

Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here... Read more

Answer:BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

For now, I do a restore point and be able to run the normal window7.

1 more replies
Relevance 21.32%

Hello,Ok so I have many issues with my laptop.First of all one day it failed and it was giving me the Hard drive not found (3F0) error.I decided to buy a new hard drive and still the same.Then I inserted a bootable usb (windows 7 pro 64bit) and tried to install windows.Then on the screen that I had to select the drive, the hard drive was shown.When I pressed to install windows a new error appeared. (ERROR CODE 0X8007045D).I devided to start over. Then again a new error appeared (Error 0x8004240f)I am really frustrated.What's wrong?Any advice?Thank you

Answer:3F0 Error, Error 0X8007045D , Error 0x8004240f

@ptheodoulou4abc? You need to partition the drive into one whole drive. You can use any free partition tool on-line. http://download.cnet.com/MiniTool-Partition-Wizard-Free-Edition/3000-2094_4-10962200.html REO  

9 more replies
Relevance 21.32%

Hey to all.
I am new to this forum and I want an answer with an ERROR.
My ERROR is "Fatal Error,NET_SendPacket ERROR : NO ERROR"(the same as title of the thread)
it occurs whenever i try to play counterstrike 1.6,counterstrike condition zero or half life 1 over LAN with another computer on the same network.But as soon as i start the game in this computer OR try to find any LAN server the Other PC which is the LAN server has this error and it exits the game on that computer only and as a result I get no LAN server.
I first thought of googling this error out but nothing worked out like the QoS uninstallation and tweeking the administrative tools>Local Security Policy.(honestly i just tried these two because i cold not understand or read any further)
Ohh and I have just re-installed the windows xp sp2 on this system.
If Any Additional Information is required please let me know.
So can anybody help me?
and please be simple i am not a geek or nerd ya know,so HOW?
 

More replies
Relevance 20.5%

I am trying to install cakewalk SONAR 7 and I get this error when running the installation and start the small window on "c++ 2005":

"Error 1935. An error ocurred during the installation of assembly
'Microsoft.VC80.ALT.type="win 32", version="8.0.50727.762", publickey Token="1fc8b3b9a1e18e3b", processor Architecture="AMD64". Please refer to help and support for more information."
-------------------------------------

When I checked the event viewer, I have a Vista application event ID 33, with the description below,

"Microsoft.VC80.MFC,processorArchitecture="amd64",
publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762"
Could not be found. Please use sxstrace.exe for detailed diagnosis."
--------------------------------------

When I try to run the sxstrace.exe, I have then this message (the error message is in blank.):

"C:\Users\Xxxxx Comp>sxstrace parse -logfile:sxstrace.elt -outfile:sxstrace.txt
Parsing log file sxstrace.elt...
ProcessTrace failed. Error message is:"


I been google this problem and try different approaches for the last 3 days and nothing fix this problem. I try to install microsoft visual c++ 2008 and c++ 2005 and have similar errors.
Any help in this matter will be highly appreciated, right now is a "dead end"...

Thanks, guys in advance for the help in this matter...

Answer:"Error 1935. An error ocurred during the installation of assembly 'Microsoft.VC80.AL

Hi,

Just to confirm for us, install the Visual C++ redist 2005, then VC++ redist 2005 SP1, then VC++ redist 2008, then VC++ redist 2008 SP1. Only restart PC after last one has finished and do them in order, one at a time. This will take quite a long time, let them finish. Then run windows update and select everything, in particular the updates for the VC++ redists (mainly security updates) and restart PC again. Tell us if anything here fails and any error messages you get. Are any of your applications getting side by side configuration errors? Then try your program install again. Hopefully it will now work. Tell us what happens. Will try and post links later as this post sent off iPhone.

Hope this helps, though you may have already done this.

Richard

P.S. You could try sfc /scannow though I really doubt it will help.

EDIT:

Here are the web addresses in the correct order:

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/details.aspx?familyid=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

2 more replies
Relevance 20.5%

Hi.

I'm really not good in computers and things, but I'll try my best to describe the error in my laptop:

I have a Satellite A200 (with Vista) I bought about 4 months ago here in Australia. It has a virus last week, so I made the recovery disk on 2 brand new blank DVDs using the Recovery Disk Creator and the creating process ran smoothly with no glitches.

Straight afterwards, I ran the recovery disk in what I think is called the boot menu? Anyway, after a couple of minutes I kept getting an error message that has something to do with "Preinst.swm file". After a few times of clicking "continue" and seeing this same error message, clicking "skip", and running the 2nd DVD, an error message shows "Error: F3-F000-0008".

Now I'm assuming that the preinst.swm error message is due to probably a scratch in the recovery disk, or some fault in the DVDs that I used and not with the actual laptop itself. I just need confirmation from you guys about this.

I'm guessing the best way to go about is just to get another Vista recovery disk (from the shop I bought the laptop from) then? Or is there another way to solve this problem that I can do before heading off to the experts? I use this laptop for work so really - no laptop, no work done!

Thanks in advance.

Answer:Satellite A200: Recovery error - Preinst.swm file Error: F3-F000-0008

Really not easy to say why the recovery procedure does not work.
But for me one thing is clear.
If you have 2 recovery DVDs, you have to boot always from the first one!!!
If you will boot from wrong DVD, you will get always an error message.

In my knowledge the Toshiba notebooks for European market are delivered together with all necessary CDs/DVDs and the Recovery medium is always in the package.
I don?t know why Toshiba Australian didn?t send the Recovery DVD together with the notebook. Maybe the Recovery DVDs are simply to available and they provide only option for a recovery creating?. Who knows...

However, it?s worth to try contacting the authorized service provider in your country and to ask if you can order a new Recovery CD for you notebook.

Good luck and best regards

1 more replies
Relevance 20.5%

I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard.

One thing is that I've been using Macrium Reflect to clone the drives. The new drives work for a few days with no errors, then I start getting the SMART warnings. I'm wondering if the cloning process I'm using could be causing this (and if so, any advice for avoiding/fixing the issue), or whether it's possible that I'm just having a string of bad luck with these drives.

These are WD SSD drives in an Alienware laptop. It's still in warranty and they said they will probably replace the entire laptop at this point.

More replies
Relevance 20.5%

Hi,

I've been having Kernal data inpage error which I assume is from a faulty harddrive (or maybe the RAM?!). I occasionally get a disk check during bootup, which didn't seem to help. I was saving up to buy a hybrid SSD/HDD drive before replacing it, but now it seems a bit too late.

Yesterday after a windows update, I rebooted my computer and the desktop was running very slow, nothing would open, explorer.exe would crash, I would be stuck in desktop until I force shutdown by holding the power switch (Shutdown didnt work), after doing this once or twice, I now get a BSOD again with a registry error right after the desktop loads for 1-2 seconds. X051 error code I think.

What step should I take now to diagnose the problem?
Thanks!
 

More replies
Relevance 20.5%

I did tried to update an old modem about a week ago and ever since I cannot connect to the internet. I have two laptops and works fine. I have a wireless set up.

I just tried plugging in the Ethernet connection to the laptop to no avail. Still no connection.

Info:

HP Compaq nc6230
Wireless setup

I tried connecting to other unsecured wireless networks in the area and still was not able to access the internet.

Please help.

Thank you.
 

Answer:Laptop cannot connect to Internet - DNS Failure, Gateway Error 0x2afc, Error 12007

8 more replies
Relevance 20.5%

I posted this earlier but reposted this and erased the old thread because I have more information now and have narrowed down the problem (I hope).

This problem just happened yesterday after I had to manually shut down (used power button) my computer after it froze. Now when I try to load up IE, it "halfway" opens up (you can see parts of the interface) and just freezes. I thought maybe it was an IE problem, but if I try to load up Firefox (even without loading up IE first), nothing happens -- it won't load. I load up the Task Manager and firefox.exe is there as a process even though it hasn't loaded. The only way I did figure out to surf the net is to load up "My Computer" and enter a web address from there manually. But even when I do that, if I click on any link that opens up a new window, IE will try loading that new window up which freezes. Right after this happened, I get a "Generic Host Process for Win32 Services Error" (still do every now and then. I also d/l'd the "patch" for this from Microsoft's website to no avail) which says something about svchost.exe and some other exe's. I think it has something to do with networking because I loaded up "Event Viewer" from the Control Panel and I managed to track down the error I get *each* time my computer starts up These errors I get are *all* dated right after I had to manually shutdown the computer and when the problems began. Here it is:

Source: D... Read more

More replies
Relevance 20.5%

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows d... Read more

Answer:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

7 more replies
Relevance 20.5%

I am trying to download OOTP 11. I keep getting error messages....first it will come up...error reading from file(and than the file name)..than an .exe. is not a valid message error....than a not a valid win32 application error. I am downloading on windows xp, and from a disk. I would appreciate any help given. Thank you!

Answer:not a valid win32 application error/ error reading from file errors downloading

This is the program you want. There are both Windows and Mac versions. Make sure you have the right one. Also, try an alternate download site.QuoteOut of the Park BaseballFrom Wikipedia, the free encyclopediaJump to: navigation, searchOut of the Park Baseball 11Developer(s)    OOTP Developments Publisher(s)    OOTP DevelopmentsPlatform(s)    Mac OS X, Windows, LinuxRelease date(s)    April 2010Genre(s)    Sports ( Baseball), SimulationMode(s)    Single playerMultiplayer (Hotseat, TCP/IP)Media/distribution    Digital DownloadSystem requirementsWindows: Windows Vista or XP, AMD or Intel Dual Core 2 GHz, 1 GB RAM, 1024x768 32-bit display, 1 GB HD spaceMac OS X: Mac OS X 10.4.8, PowerPC G5 or Intel Core Duo 2 GHz, 1 GB RAM, requires OpenGL support for face generationOut of the Park Baseball, abbreviated as OOTP, is a text-based baseball simulator for career, historical, and fictional play. OOTP was originally written in 1998, when lead developer Markus Heinsohn sought to combine realistic replay baseball simulation with career play to satisfy hardcore fans and casual gamers alike. OOTP does not hold a license from nor currently have any affiliation with Major League Baseball.http://en.wikipedia.org/wiki/Out_of_the_Park_Baseball

4 more replies
Relevance 20.5%

Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks

HDDStatus - Tool to check hard disk status, health and reliability

Hey,

I've been using GoodSync for the past couple of months to chain synchronize 3 hard disk drives and ran into my first issue today. GoodSync stopped responding whilst synchronizing changes to files so I used task manager to manually end the process.

I'm not entirely sure how much damage has been caused but when I re-analyzed the file changes a lot of the changes prior to the crash was no longer listed.. So I'm unsure of the file integrity but have so far noticed some music video files are corrupt with cyclic redundancy check errors but is not easily visible to check corrupt files because they still play but parts of data are missing.

I think I've experienced cyclic redundancy check errors before when my external hard drive fell flat on it's side whilst it was playing music (3 years ago). It took me a long time to filter out the bad files because all the mp3 files worked but some songs would randomly play in others etc.. is their some type of automated CRC scanner or method to check all my files ?

Thanks

Answer:Error copying file: Data error (cyclic redundancy check). CRC Scan ?

If you are able, try this programme, it is VERY good. HDD Regenerator - Dmitriy Primochenko Online

1 more replies
Relevance 20.5%

Hi, I got this error message this morning right after trying to get the laptop off standy off and it froze, so re-booted and voila this error came up... have read up a bit about it, and it seems I'd need to get a BOIS uprgade done, but dont know how to go about it now that I can't log-on... The bigger problem is that Lenovo does not support the T61P in India, andif I cant fix it by myself I am left saddled with a a very heavy paper weight! Thanks,Conred

Answer:ERROR 2100: HDDO (Hard Disk Drrive) initialization error (1) with T61P

Hi Conred, http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67989 here is the link to the bootable bios update for you T61P. should work if there's no prob. with your HD. Jay





T61P(6459-CTO) T9300 @ 2.5 GHz, 4g ram, Quadro FX 570M, Vista Bus. 64Bit, 160gig 7200 rpm HD, WSXGA disp.

2 more replies
Relevance 20.5%

Hey guys, i want to thank you ahead of time for helping me.

This BSOD is a pain in the butt.

Intel Pentium 2.8GHZ
RAM 3.5
32 bit OS
Intel GG965 Express Chipset Family

I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be 100% sure before i go and shell out the $$ for a new one

Please help The blue screen error points to igdkmd32.sys & it also says GRAPHICS_DRIVER_TDR_FAULT

Answer:BSOD error.. Restarts, but power button stays on, graphics card error?

STOP 0x00000116: VIDEO_TDR_ERROR (go to top of page)

Usual causes: Video driver, overheating, bad video card, ?BIOS, ?Power to card (see Significant Posts section below)

http://www.carrona.org/bsodindx.html#0x00000116

Incase you have overclocked your GPU reset it to the default.
Update your graphics driver to the latest stable version

1 more replies
Relevance 20.5%

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

Answer:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup

Hi

Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

1 more replies
Relevance 20.5%

Hello, I upgraded my X120e to windows 10 but continually get a windows update error for the Conexant audio.  Has anyone run into this and found a solution?Thanks.

More replies
Relevance 20.5%

I posted this earlier but reposted this and erased the old thread because I have more information now and have narrowed down the problem (I hope).This problem just happened yesterday after I had to manually shut down (used power button) my computer after it froze. Now when I try to load up IE, it "halfway" opens up (you can see parts of the interface) and just freezes. I thought maybe it was an IE problem, but if I try to load up Firefox (even without loading up IE first), nothing happens -- it won't load. I load up the Task Manager and firefox.exe is there as a process even though it hasn't loaded. The only way I did figure out to surf the net is to load up "My Computer" and enter a web address from there manually. But even when I do that, if I click on any link that opens up a new window, IE will try loading that new window up which freezes. Right after this happened, I get a "Generic Host Process for Win32 Services Error" (still do every now and then. I also d/l'd the "patch" for this from Microsoft's website to no avail) which says something about svchost.exe and some other exe's. I think it has something to do with networking because I loaded up "Event Viewer" from the Control Panel and I managed to track down the error I get *each* time my computer starts up These errors I get are *all* dated right after I had to manually shutdown the computer and when the problems began. Here it is:Source: DCOMEvent ID: 10005DCOM got e... Read more

Answer:Generic Host Process For Win32 Services Error / Dcom Networking Error -- Help!

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Please download ComboFix and save it to your desktop.Double click combofix.exe and follow the prompts.When it's done running it will produce a log for you. Please post that log in your next reply.Important Note - Do not mouseclick combofix's window whilst it's running. That may cause it to stall.

12 more replies
Relevance 20.5%

Hi,I have fundamentally the same problem as Laura H from this thread http://www.bleepingcomputer.com/forums/topic342716.html.I've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to basics....no theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

Answer:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Relevance 20.5%

I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

More replies
Relevance 20.5%

This morning I installed new Hard Disk (WD Black2 Dual Drive) on my notebook Lenovo T410, then installed Win 8.1 on it too, It worked  for about 4 hours and my notebook stopped working. I tried to restart the system, but appeared the error: "ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1). How can I fix it?

Answer:T410 - ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1)

Hi Wjroque,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issues after up-grading the WD Black2 Dual Drive on your ThinkPad T410.
 

Have you checked with updating the WD Black2 Dual Drive firmware for your system?
Please click here to visit the link to download the firmware for that and follow the WD Black2 Firmware Update Instructions.pdf located in the downloaded zip file.

Hope this helps.
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 20.5%

My friend has a Toshiba Satellite P75-A7200 and when he tries to boot up his computer he get a "Checking for media error" then "no bootable device found error". Multiple reboots same thing. His antivirus expired and he thinks he got a virus. Is there any way to flash a clean bios to his computer? He has Windows 8.1 and cannot get it into troubleshooting mode. Any suggestions? I'm old school and am used to boot disks.

Answer:Satellite P75-A7200 Checking Media error then No Bootable Device found error.

In order to boot from external device (like CD/DVD drive, USB flash memory stick, etc…) you have to disable the secure boot option within the BIOS settings.

If you want to boot from the internal HDD and the error still appears, then HDD could malfunctions…
In such case you should check whether the HDD is listed in the BIOS.
If not, you should replace it.

1 more replies
Relevance 20.5%

Help, can't print anything and can't find out how to fix that error code

Answer:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

4 more replies
Relevance 20.5%

I have installed a Vertex 2 (2VTXE180G) some time ago in my Thinkpad T410 (2522-3FG). The installation was successfull, but after less than a week I got the 2100-Error.I thought, that the SSD could be damaged, so I sent it to warranty.Last week I got the replacement drive and today I wanted to install the drive. But it did not work. 2100-Error since the first boot. Is this a problem with T410 and the Vertex2 SSD?Should I send the drive to RMA or should I choose another drive? Does somebody run this combination without problems? Thanks,Andr 

More replies
Relevance 20.5%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

Answer:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

3 more replies
Relevance 20.5%

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!
 

Answer:Random restarts -event id 1003 -system error- error code 000000f4

Your error is 0x000000F4: CRITICAL_OBJECT_TERMINATION
One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive


The driver citted is crsss.exe and is an important part of your Windows OS.


See this link and read #2 to get some idea f what this driver does: http://www.liutilities.com/products/wintaskspro/processlibrary/csrss/


* It might pay you to do a security scan with your antivirus, etc.
 

1 more replies
Relevance 20.5%

Hello and good evening to you all, I urgently need some help please and i'm HOPING that there is a solution here here please. My neighbour brought her laptop round to me this evening, that she was listening to music on it yesterday, and it just went off. I though it was a virus, as ive sorted out her laptop for her before, when it had a vius,...but this time it seems different.
Its a Windows vista laptop, and she's had it for about 3 years now. Its a compaq laptop. All her music, word docs, family photos are on her laptop, and NOTHING is backed up anywhere.
I've switched it on and I get the exact following message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)
SO ive tried it in safe mode with f8, and sstill same message,....
Ive switched it back on, and then it askes whether to launch startup repair(recommended)..
I clicked on yes, and it said loading files........
Them it takes me to the system recovery options screen,...where it says Uk, and tells me to select next....
I've stopped here as ive no idea wheterh it'll will work ir actually WIPE the whole laptop, and hence my neighbour loses ALL her stuff on the laptop..which I dont waht at all.
Any suggestions please???

Answer:Urgent Help needed...Error Message: LOADKEY FAILED WITH ERROR 1009 (STHIVE#0)

Hi - you should be fine -I had a start up problem once (not same one) and used the start up repair and it sorted it without affecting my data - may be worth awaiting a second opinion from someone who knows what the problem is though!

10 more replies
Relevance 20.5%

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD. It worked fine for a month. I also have PGP installed and whole disc encrypted. I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error.. TRIM is enabled on my system. I am not sure how the SSD died so quickly. I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is  the PNY SSD just a bad model? I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy.. help please! thanks in advance !

Answer:W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

Hello,
I don't have a ThinkPad W520 or a PNY SSD, but could it be simply that the SSD is coming loose inside the ThinkPad's chassis?  I suppose this could occur if a 7mm high SSD was inserted into a 9.5mm high 2.5" drive bay with a ~2mm spacer to "pad" the unused vertical space.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 20.5%

Hello,
 
Every time the computer reboots the message "GetEseDbInfo.exe has stopped working" appears. Checking for solutions yields no results.
 
Since this message has started:
 
- Windows search has quit working and states that "windows cannot access the specified device, path, or file. You may not have appropriate permissions to access them." 
 
- IE will only show a white screen and will not allow the tools option to be accessed. It keeps trying to recover and  cannot find any solution. Attempted downgrade to IE 9, re-install of IE10, use windows fix, and microsoft safety scanner.
 
-  Sticky Notes is unable to launch as it cannot access the file. 
 
I have run AVG, Advanced SystemCare, and Malware Anti-Malware but they all show up with nothing found. I don't know if these are all tied into together or are separate issues. 
 
The computer is a Windows 7 64bit operating system. 
 
Any help would be wonderful. Thank you!

Answer:GetEseDbInfo.exe error, IE White Screen, Search Access, & Sticky Notes Error

Open Task ManagerProcess (tab)Find GetEseDbInfo.exe, right-click and select "Disable"Reboot into Safe Mode with Networking. ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Delete.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.   Last run ESET.Hold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.When the scan completes, click List ThreatsClick Export, and save the file to your desktop using a unique name, such as ESETScan. In... Read more

6 more replies
Relevance 20.5%

Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

I get the above error while i try formating my computer. i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. Another error

Missing Operating System

I get this error when i try to start my computer.

I am using a compaq laptop......Please help me out.

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Hello ,

what you need to do is erase the harddrive then do the reinstall , you can get a free program that you can create a bootable cd to do this with from here

(http://www.majorgeeks.com/Dariks_Boo...uke_d4596.html)

or you can download the tools to do this from the manufacturer of the harddrive

either way you will have to make the bootable cd

make sur you read the instruction on the way to use the program

then start your system then put in the cd / reboot to load the cd and then erase your drive

depending on the size of your dive this can take from 1 to 5 hrs

this will write the drive to zero's and make it as if it never had software install on it ( like new from the factory)

Mike R.

2 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies
Relevance 20.5%

Hello.
I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.


DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
*********************
relevant bits from it seem to be:
Checking System Update Readiness.

(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:    2
    CBS Manifest Corruption:    0
   &nb... Read more

Answer:Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Hi,
Please upload the DISM.log files into OneDrive and post us the link here. The DISM log file can be found at
C:\Windows\Logs\DISM\dism.log.
Besides, for the CSI payload corrupt issue, please take a try to reset the Windows update components. Then try to run the command and check the results:
Follow this guide: How do I reset Windows Update components?
In addition, update the system to Windows 8.1 will make a better usage of the features and functions offered.
Windows 8.1 and Windows RT 8.1 build on
Windows 8 and Windows RT, to bring you enhancements in personalization, search, apps, the Windows Store, and cloud connectivity, and has the security and reliability features you expect from Windows. It's fast and made to work
on a variety of devices?especially on the new generation of touch devices.
For more information regarding update to Windows 8.1 from Windows 8. please see:
Update to Windows 8.1 from WIndows 8
Best regardsMichael Shao
TechNet Community Support

5 more replies
Relevance 20.5%

I dont know how this started but i need major help please.... When I turn on my computer I receive an AutoIt Error, Line -1, Something went wrong with " Object" and when i dismiss the warning later on I receive Data Executive Win32 Prevention Errors and memory reference errors. I have read alot of forums for help. I have ran malware programs, virus scans, etc.... No luck its just getting worse and slowing down my computer and now I get a blue screen when I try to boot up in safe mode and the drivers loading screen comes up. What do I do?

I read the instructions for posting this type of post, and I have attached the logs requested.



.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702
Run by patesag at 16:03:47 on 2012-06-08
.
============== Running Processes ===============
.
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://bakerhughesdirect.com/
mStart Page = hxxp://search.searchonme.com/
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dll
BHO: DivX Plus Web Player HTML5 <video>: {326e768d-4182-46fd-9c16-1449a49795f4} - c:\program files\divx\divx plus web player\ie\divxhtml5\DivXHTML5.dll
BHO: PlusIEEventHelper Class: {551a852f-39a6-44a7-9c13-afbec9185a9d} - c:\program files\nuance\pdf professional 7\bin\PlusIEContextMenu.dll
BHO: Groove GFS Browser Helper: {72853161-30c5-4d2... Read more

Answer:AutoIt Error, Data Prevention Win32 Error, and Memory Reference Errors.... Help!!!!!!

When the drivers loading screen comes up during safe mode boot the computer goes to a blue screen. I never faced this problem before. Please help....

19 more replies
Relevance 20.5%

Hello, i am having a problem i get
Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

What im trying to do is formating my computer i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. I tryed reisntlaling windows, overwiritng file, please help!


(i have readed all the posts about this error to but that didn't help in my case.)

Answer:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Quote:





Originally Posted by oshwyn5


Xceltron: It really would be helpful if you kept it all in one thread and told us all your symptoms.
I see you have more than one thread as well as asking for help in someone elses thread. THis makes it very hard to follow.

http://www.techsupportforum.com//mic...ard-error.html


http://www.techsupportforum.com//mic...ard-error.html

http://www.techsupportforum.com//mic...any-files.html



Let me start with analysis of this error.
http://aumha.org/win5/kbestop.php




If you are getting this error when trying to reinstall from your XP cd, then it sounds like you have a loose damaged or incorrect cable to either your cdrom or hard drive. I suggest replacing them both with quality 80 wire 40 pin IDE cables. It can also be caused by incorrect configuration if you have RAID or SATA drives.
Finally you may want to try with just one stick of RAM installed. If you have more than one now; you should try each in the slot nearest the processor all by itself until you rule out one of them being bad (If it works with one stick and not the other, you know the other is bad).

There is more information on possible causes of this error at ahuma ; but my first suspicion on seeing the image checksum mismatch is that the file in question has been replaced with something else, a trojan or virus.

Please download
Mcafee stinger multivirus removal tool
Install and run

Spybot search and ... Read more

9 more replies
Relevance 20.5%

Agent.exe - Entry Point Not FoundThe Procedure entry point qsovt could not be located in the dynamic link library C:\Windows\SYSTEM32\apphelp.dll.I get this error whenever i try installing something new. I have a 128GB SSD that has my operating system, and a 3TB HDD that i use to store everything else in like movies, games, programs, etc.Whenever i try installing something, this error pops up multiple times, when i press "OK" it disappears and pops up again. It doesn't stop the program from successfully installing, but it's annoying. How do i fix this?

Answer:Agent.exe - Entry Point Not Found Error / Dynamic Link Library Error

It's for Forte's email client...and InstallSheild in some cases...

3 more replies
Relevance 20.5%

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

More replies
Relevance 20.5%

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

Answer:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes

Shawn

13 more replies
Relevance 20.5%

I have an Acer 6920, Vista, and I have taken the following actions after the computer would not boot:
a. ordered reinstall disk from Acer
b. reinstalled the system using the four disk
c. worked with computer normally for three weeks
d. encountered the original problem again of not booting
e. tried to go back to factory settings using the reinstall disk from Acer
f. after 65%, encountered the 0XD00000A error
g. tried again, and encountered the same error

Is this a Vista problem, an Acer problem, or something that happens often?

Any help would be greatly appreciated.

More replies
Relevance 20.5%

Error message Explorer.exe application error (0xc0000005)


I have the same error message
Error message Explorer.exe application error (0xc0000005)

It seems to have occured after I got infected with some ad ware.

I have tried going into windows/system32/wininet.dll and updating the file from one downloaded from the dll web site.

It has gotten rid of the blank desktop, but now my desktop is just as bad it goes from having all the icons it to zero icons on it every 4 seconds or so.

Myhijack this log is below.

If anyone can help me I would REALLY appreciate it!

Thanks, Rolland

Logfile of HijackThis v1.99.1
Scan saved at 1:05:54 AM, on 5/29/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\taskmgr.exe
C:\Program Files\Common Files\EPSON\EBAPI\eEBSVC.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\W... Read more

Answer:Error message Explorer.exe application error (0xc0000005) blank desktop

Print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should 'not' have any open browsers when you are following the procedures below.

Download CleanUp! http://cleanup.stevengould.org/ (Alternate Link if main link don't work - http://www.greyknight17.com/spy/CleanUp.exe ) and install it. Don't run it yet.

Download Ewido Security Suite at http://www.ewido.net/en/download/

1. Install Ewido Security Suite.
2. When installing, under 'Additional Options' uncheck:
* Install background guard
* Install scan via context menu
3. Launch Ewido, there should be an icon on your desktop, double click it.
4. The program will now open to the main screen.
5. When you run Ewido for the first time, you might get a warning 'Database could not be found!'. Click OK. We will fix this in a moment.
6. You will need to update Ewido to the latest definition files.
* On the left hand side of the main screen click update.
* Then click on start update.
7. The update will start and a progress bar will show the updates being installed. The status bar at the bottom will display 'Update successful'.
8. Exit Ewido. DO NOT scan yet.

If you are having problems with the updater, you can go to http://www.ewido.net/en/download/updates/ to update manually.

Download SmitfraudFix http://siri.urz.free.fr/Fix/SmitfraudFix.zip an... Read more

1 more replies
Relevance 20.5%

Aprox. 3 year old Gateway laptop. Recently started running very slowly. Last night would not boot at all. Shows Gateway Logo when turned on then Press F11 to start recovery-get MBR Error.
Press Esc- get Operating System not found

Does not recognize the system recovery cd/dvd

After it is inserted- Press R for System Recovery options- Get Hard drive write error! Press any key to continue.

System tries to re-boot- shows press R for options
Then press F to format drive and perform a full system recovery- get Hard drive write error! Press any key to continue.

System tries to re-boot - shows press R for options
Then press Q to quit ant to boot the OS on hard disk.-
Hard drive write error! Press any key to continue.

Any help would be greatly appriciated.

Answer:will not boot- MBR Error, after recovery attempt- Hard drive write error!

hi, you say it does not recognise the system recovery disk, have you accessed the BIOS, by pressing f1, f10, f10 or del then go to boot order and make sure the cd is booting first then the hard drive. Also in the bios check if the cd-ROM is detected.
Is it possible to access safemode through f8? or can you only choose the two options displayed?
I think it might be that your hard drive is failing,
Also make sure the BIOS setup doesn't inhibit wrting to the boot sector
Check this to see if the hard drive is failing.
http://www.techsupportforum.com/f234...es-302602.html

4 more replies
Relevance 20.5%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

Answer:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Relevance 20.5%

Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner

Answer:windows vista bsod STOP error (error posted)...any thoughts?

Quote:





Originally Posted by ajcool123


Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner




Hi. . .

A bugcheck of 0x00000124 = 0x124 indicates that a fatal hardware error has occurred. The reference to WHEA is Windows Hardware Error Architecture. There is an event log for WHEA, under Applications and Services\Microsoft\Windows\Kernel-WHEA. It usually contains entries stating that WHEA was successfully initialized, that x# error sources are active and the record format of WHEA. I have never seen any other entries in it b... Read more

2 more replies
Relevance 20.5%

Hey,
 
Got this posted on a few other forums, so i'll just copy + paste it and list what i've tried so far.
 
SUMMARY OF PROBLEMS
 
UPDATE: The main problem at the moment seems to be linked with the Inetcpl.cpl in C:\Windows\System32
 
- Cannot open Internet Explorer: When I open IE 9, the process appears, and internet explorer starts up. As soon as the tab for my homepage loads, IE closes straight away, and leaves behind the download manager for IE, asking me if i want to download my homepage.
 
- Cannot open Internet Options through control panel: When i go to Control Panel > Networking > Internet Options and click on it, nothing appears on screen, no matter how many times i press it. Same thing happens with IE > Tools > Options; nothing appears
 
- Cannot open Skype (I found this was linked to the IE problems): When I open Skype, the login page stays on a white screen, and i am unable to click anywhere on skype / close it, I have to force close it by ending the process (Temporary solution found, look below)
 
- Cumulative Security Update for IE 9 won't install (Windows Update): This has been an on-going problem for around a year+ now, but still relevant. Whenever my Windows Update has a Cumulative Security Update for IE 9, I try to install it, however it fails and says updates were not configured correctly, reverting changes The error code I get is: 800719E4. As far as I am aware, there is no solution to this er... Read more

Answer:Internet Explorer + IE Options Issues / Inetcpl.cpl Error / Skype Error

I know it's not a virus problem, I have a clean system at the moment, I think it'll be more appropriate in the Vista forum

4 more replies
Relevance 20.5%

Hi,

During a Windows 7 upgrade I am getting the following error message. Windows Setup experienced an unexpected error - Error Code: 0x0.

Searching on web I've found recommendations for setting the DMA on the optical drive (can't), updating the bios (done), checked the media (DVD Toshiba supplied Windows 7 upgrade disk) all seems OK visually and turning off antivirus (AVG resident shield turned off). I still get the same error.

Help would be appreciated.

Thanks

Answer:Portege 600-Windows Setup experienced an unexpected error - Error Code: 0x0

On which step is this error message shown?
I have done this upgrade several times successfully and without error messages.

Have you followed instructions how to do upgrade to Win7 using second component CD that removes all non-compatible tools and utilities before Win7 upgrade installation?

2 more replies
Relevance 20.5%

Hi there,
I did a search on google and through these forums search function but all I can seem to find are topics about vista and backing up problems. I did find a link to a microsoft hotfix for my problem, but it was only for specifically 4GB+ of Ram and an nVidia USB EHCI. Sadly I do not meet these specs.

The problem started with copying a bunch of files over from one external HDD to another (friend's to mine). It froze about half way through and locked up my whole computer. This had happened once (I think, maybe twice?) befor when copying files from my C drive over to my external, and turning my PC off/on again sorted it out.
Since then my external is experiancing a host of problems. It doesn't shut off if you unplug it from the computer or turn the computer off, it's always whirring. It's greyed out if you go to safely remove hardware. Opening a media file in anything gives an error (eg. VLC gives this error):
File reading failed: VLC could not open the file "E:\Insert File Here".
Your input can't be opened:
VLC is unable to open the MRL 'E:\Insert File Here'. Check the log for details.Click to expand...

Upon trying to copy anything to or from the HDD and trying to move/delete any files, it gives me the old error in the topic title: 0x8007045D I/O device error.

I expect one solution is to completely re-format my external HDD, but I can't stress how much I REALLY don't want to do that without being able to get mos... Read more

More replies
Relevance 20.5%

HI, I was browsing the internet and got the Internet 2010 malware and maybe 10-12 Trojans. I did some clean-up using McAfee and Ad Aware programs. But when I rebooted I was getting many executable programs failing with the message "error loading c:\windows\system32\bisomasu.dll"I used one of the download.bleepingcomputer.com/grinler/rkill programs as well as ran the AVZ.exe which seemed to clean up bisomasu.dll. The only error loading message I get now on reboot is the pop-up RUNDLL error loading c:\windows\system32\kiremava.dllHowever, my google browser redirects to different sites and says my gmail certificate is not recognized as trustworthy in both firefox and IE. I even tried to re-install firefox and it redirected me to a fake site that look just like the real deal to download a virus executable which McAfee found and cleaned instantly. Once I cut and pasted the right url and installed a fresh copy of Firefox, it is still redirecting.I'm clearly still infected. I would be most appreciative if you would help me. Thank you.DDS (Ver_09-12-01.01) - NTFSx86 Run by M T at 6:37:47.73 on Sat 01/09/2010Internet Explorer: 7.0.5730.11Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1022.227 [GMT -5:00]AV: McAfee VirusScan *On-access scanning enabled* (Updated) {84B5EE75-6421-4CDE-A33A-DD43BA9FAD83}FW: McAfee Personal Firewall *enabled* {94894B63-8C7F-4050-BDA4-813CA00DA3E8}============== Running Processes ======... Read more

Answer:Google redirects / RUNDLL kiremava.dll error / Had bisomasu.dll error / Still infected

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.Please download OTL from following mirror:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedIn the upper right hand cor... Read more

45 more replies
Relevance 20.5%

Updates regarding to error code 80240020
After having Upgrade Windows 10 Home failed installation error code 80240020 in Windows Update history (about 23 failed) starting August 1 through August 4. I now have the Upgrade to Windows 10 and Get started button in Windows Update.
I also notice message in Get Windows 10 app right next to OK, notify me ready button there's a message about They are working hard with partners to make upgrade better Install anyway link button style underneath that it display (not recommended) something like that but I don't exactly remember the exact message because that message is now gone when i close the Get WIndows 10 apps.
I also did this before turning on my computer remove the HDMI cable that I always use and use the VGA instead. It might just be a coincidence

Answer:error code 80240020 It means wait for the upgrade to notify you or they fix that error.

I used the media creation tool to get around the same issue, worked flawlessly and let me install without hiccups.

2 more replies
Relevance 20.5%

Hello,
I wanna to Recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the Recovery

Menu (while booting from the Recovery DVD) my Laptop just restarts and each time I try this (very simple procedure) this

happens again.
Therefore I'd tried to Recover it from Win XP >> Toshiba Recovery Wizard ... in the first DVD in the "BIN" folder there is

a batch file "RECOVERY.bat" when I execute this file a CMD window opens and some checks are arranged (and then the

following text appears in the CMD window:)
"
DMI check
RAID check
Failed to initialize the raid class.
HDD check
Error end
"
and a new window opens with the following text:
"
<ERROR>
an error has occurred.
Error : F3E1000001
Hard disk not found.
Please press [OK] to turn off the computer.
"
and if I press OK the copmuter goes Immediately down (without shutting down windows) and I must turn it on again.
In addition my Laptop works properly my Recovery DVDs seems fine, I just wanna Recover my system in cause of more speed

in Win XP.
Maybe there is some new firmware for my HDD or some BIOS update so that the Laptop would detect my HDD.
In the Device manager my HDD is : HTS541010G9SA00

Answer:Error while Recovering Tecra A6 (Hard Disk not found. Error : F3E1000001)

Wait a moment: do you try to run recovery installation under running operating system?

The recovery procedure must be done on follow way:
Switch notebook ON and press F12 button
When the bootable devices are shown put the first recovery media into optical disc drive
Choose CD/DVD media in the list and press ENTER
Follow the menu on the screen.

4 more replies
Relevance 20.5%

We are running Windows XP and get an error code upon booting up that says, "Setup error encountered during installation - Error code 000D". I normally go to the web to find assistance, but can't seem to find an answer this time. Most ask if I have a file called "Creator" or Roxio products installed on the computer. I have searched for these files, but haven't found any. I do have a SONIC program. And I do have Creative MediaSource, but I don't think these are the same. Any ideas? Any help would be greatly appreciated. Thanks.
 

Answer:Solved: Win XP Error - Error Code - 000D: Encountered Prob Dur Install

8 more replies
Relevance 20.5%

Well I built this computer in september of 2011 everything was running great no problems at all until today. I left it on and went to the store came back and BSOD. My computer restarted before I could write down any information "Error code" system restore said it was a "unknown error" which terminated my system. My Computer is running fine but I would like to make sure nothing is wrong. I'm thinking it may be my mother board because one of the SATA slots is broken and I had to switch to another one.

System specs
Cpu: Core i7 2600k
OS: windows vista home premuim 64 bit
Motherboard: Asrock p67 extreme4
Memory: 4 gb Corsair vengence "will increase to 8+ as well"
Harddrive: 1TB
Graphics card: 8600GT "will upgrade when BSOD is solved"

If you need anymore information I have the app on my phone and should be able to response quickly. The resource and Performance monitor file says I have no Anti-virus program but I do.... Also says the only thing that failed was system service checks - abnormally terminated service check

Answer:BSOD. error Custom built computer. error unknown between 0 or 1077...

Here is the Full resourse and performance file

9 more replies
Relevance 20.5%

Please someone help me!

I am running XP Home edition, with IE 8. All updates have been installed for both packages, in addition all updates for other programs have been updated and installed when appropriate.

MS Office 2000 (With MS Outlook 2003) has been working on my POC almost flawlessly for several years. All of a sudden it has been acting funny. So I decided to reinstalled / repair it.

I have a hard time updating and repairing Office 2000. I keep getting the error message code 1316, networking error. DATA1pro.msi. I have followed MS help site word by word, but to no avail. http://support.microsoft.com/kb/263253

I did a virus info update and full scan
Scanned for spy ware, with two packages, Ad Aware and A-Square.
Defragged
Checkdsk
Registry cleanup
Removed all startup items that arent necessary
Tried disabling the anti-virus software
I also ran an XP system repair and a system file check
Cleared all Temporary Internet Files and cookies, etc. (I usually run http://www.ccleaner.com/ CCleaner on start-up).
I disable the Find Fast Indexer http://support.microsoft.com/default...&Product=ofw97
or http://tinyurl.com/tkwm
Tried to run system restore and did not work.
I copied the entire CD's content to the hard drive and perform following steps:
o xcopy e:\newcopy /f /s /e /i /h
- Opened the Setup.ini file on the hard drive
- Changed the "MSI=Data1Pro.msi" line to "MSI=Data1.msi"
- Saved the changes m... Read more

More replies
Relevance 20.5%

Hi,
I'm worried about this Microsoft Visual c++ runtime library error... It happens, whenever i'm trying to do anything with my malwarebytes anti-malware. And even if I open the folder where i put malwarebytes exe, there also it shows this error.. Can anyone help me.. Thnks...

Answer:Microsoft Visual C++ Runtime Library error, error message 00289x01849

Does this happen if you right click on MBam and coose to run as Administrator?

4 more replies
Relevance 20.5%

So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c.
So far i have tried-
all four methods on the microsoft help page here:
?0x8007042c? error message when you try to start Windows Firewall
when i tried manually starting it i got error 1068 the dependency service or group failed to start

Ive also tried
Sharrow's "Most helpful Reply" on this page-
Windows could not start Error 1068: The dependency or group failed - Microsoft Community
although i dont have aland line so idk if what i did affected it well or not... person who wrote the thing had a wlan so idk if what i did was wrong.. anyone wanna let me know?

it didnt help either.

so i ran sfc /scannow on elevated command prompt and got it to my desktop (learned how to do that today )
here is what i got on it.... can anyone help me figure out what the issue is and how to solve it?
im only gonna post the stuff it cant repair, i dont think yall need the other stuff.

a third of the way through-
2014-01-06 10:56:16, Info CSI 000000e8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 10:56:16, Info CSI 000000ea [SR] Cannot repair member fil... Read more

Answer:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: Farbar Recovery Scan Tool Download
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: Downloading Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

1 more replies
Relevance 20.5%

recently (about 2 weeks back) i have been receiving 1 of 2 error messages either dcom server process launcher terminated unexpectadly or plug and play terminated unexpectadly, when these messages occur (usually every2-2 1/2 hours) im given a 1 minute countdown at the end of this countdown my computer restarts. while this doesn't seem to be harming my computer it is amazingly annoying, also if i go on yahoo search and look for a item i click on a link and im redirected to an advertising site: this occurs every 3 out of 4 clicks of said link. i have tried every antivirus software i own norton antivirus, malicous removal tool, windows defender, and malwarebytes nothing has worked every scans shows no infection. im not the only one having this problem several sites and forums i have visited has people with the same or similar problem which has happened to them in roughly the same time frame. if anyone can help i would greatly appreciate it because so far my only option would be to reformat my computer and reinstall every thing and i would really like to avoid that. please help me bleeping computer your my only hope.

Answer:dcom server error, plug & play error, redirects & restarts

oh almost forgot my computer is a dell pc that runs on windows vissta my apologies for not including this info earlier

1 more replies
Relevance 20.5%

i have been having some troubles with my printer lately [Canon Pixma iP1800]
and i have been trying to enable "Printer Spooler" i went into services.msc and tried to fix the problem but came back with negative results Failed To Read Discription Error Code: 2) i later referred to Eric01's thread for further help for regedit (HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
i have found all original files mentioned in that thread with no extra files.
I have also tried to find any files within C:\Windows\System32\spool\PRINTERS and to delete anything in there.

So far i have had no luck and a report due soon.Please Help!!!!

System Specs : Windows 7 Ultimate 32x/4GB Ram/

BTW READ: in services.msc it does not read Printer Spooler but just Spooler
 

Answer:Printer Spooler Error (Failed To Read Discription Error Code: 2)

8 more replies
Relevance 20.5%

anyone run this one before?
I am not currently using a WIFI device.

Error 16393
Log Name: System
Source: Microsoft-Windows-Bits-Client
Date: 12/8/2015 3:05:05 PM
Event ID: 16393
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: AllenTown
Description:
BITS has encountered an error communicating with an Internet Gateway Device. Please check that the device is functioning properly. BITS will not attempt to use this device until the next system reboot. Error code: 0x80004005.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Bits-Client" Guid="{EF1CC15B-46C1-414E-BB95-E76B077BD51E}" />
<EventID>16393</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-12-08T21:05:05.441501000Z" />
<EventRecordID>650</EventRecordID>
<Correlation />
<Execution ProcessID="844" ThreadID="1104" />
<Channel>System</Channel>
<Computer>AllenTown</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ErrorCode">2147500037</Data&g... Read more

Answer:How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?

It happens to all my machines, and their internet connections are fine. Seems to be a common problem, but it likely isn't really causing any issues other than to those of us that look in our event viewers all the time.

0 more replies
Relevance 20.5%

I took apart my computer so I could build my new one, but the new motherboard was bad. I put my old computer back together and I get a 02b0: Diskette A error. I am not 100% sure the pci devices are in the same slots as they where before and I am not sure if I have HD, CDR, DVD, and TapeBack plug back in the same order I had them. Does anybody know what this error message means??? I need help asap. Below is a list of some basic info

Windows 2000 on Gateway G6-450 PII w/ 256 ram, 16.8 hd, 20gb tape back up, DVD player, CD-RW, 56k modem, lan card, scsi card, voodoo 3, sb512, and external zip. Email me directly if you have any good ideas. I am using my laptop that is luckily running win2000 with no problems but need the computer us asap.

Thanks
Robert Ward

 

Answer:{Moved to Hardware Forum} - Boot Error - 02b0 Diskette error

Sounds to me like you didn't plug the floppy drive back in correctly. If the cable is backwards the drive won't work for instance.

Is the tape drive IDE or is it on the floppy controller too?

------------------
Get free stuff and help out a poor computer tech
(4/29 free $5 added - free computer headset extended to 5/31!):
http://www.rkfdcore.com/ebaypics/referrals.htm
 

2 more replies
Relevance 20.5%

I have been running WindowsXP/Microsoft Office 2002 for nearly twenty months without problem.

Today, when opening individual files in Word/Excel format, the following dialogue boxes are displayed: "Preparing to install" is first displayed, followed by "Please wait whilst Windows configures Microsoft Office XP Professional" with an incremental loading bar L to R followed by "The feature you are trying to use is on a CD-Rom which is not available. Install the Microsoft Office XP Professional Disc and click OK". The latter box offers OK/Cancel/Browse. When I click Cancel (because the subject programs are already loaded onto my computer and have been running successfully for twenty months)
I get "Error 1706. Set-up cannot find the required files. Check your connection to the nextwork or CD-Rom Drive. For other potential solutions to this problem see c:\Program Files\etc etc" When I click OK on this latest box the "Please wait whilst Windows configures Microsoft Office XP Professional" reappears and the bar unloads from R to L.

When I attempt to reopen the file in question it often opens normally.

However I feel that this problem could represent an underlying corruption which could develop.

It is essential that I do not lose my existing files.

A minor problem which may or may not be associated with this problem (it developed some time before) is that some of my files have temporary ghost files designated by~$lastletters of fil... Read more

Answer:Error 1706 set up error has developed, despite system previously running smoothly

I recently read that there is a MS service pack that causes this to happen. If you have recently applied any patches, one of them may be causing your problem. Go to the MS website and search the knowledgebase. I hope this helps.
 

2 more replies
Relevance 20.5%

Hi!
My system (XP Pro) has been doing some aggravating things of late like half a window loads, sits, finally other half will load, mouse just doesn't seem to do anything so you click (whatever) again and 3 minutes later 2 of whatever will finally open... just annoying crap really! A few days ago comcast went off and I had to unplug modem, wait, then plug back up and restart system. I got a "Disk read error press control, alt, delete, to restart" error, tried that same thing so I shut down and when I turned back on it booted fine. I have since moved... just set up the system and am getting the same error except this time shutdown/restart isn't working ( The OTHER problem I realize is this... this is a tempory move! Most everything I own is in a storage unit, boxes to the back, furniture to the front and guess where my disks are? Right! I put printer, shredder, disks, everything I didn't just HAVE to have in the storage unit. My XP CD is in there SOMEWHERE. It is NOT an option to find it... Can anyone offer ANY help at all?
Thanks
 

Answer:Disk read error press control, alt, delete, to restart ERROR! Please HELP!

Sounds like you need to run chkdsk /r from the recovery console on the XP cd. I had a similar problem and did not have the XP cd.

Had to borrow my daughter's XP cd to run the recovery console. Do you know of someone that would be willing to let you use their cd?
 

2 more replies
Relevance 20.5%

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

More replies
Relevance 20.5%

Can't give exact machine spec because I can't get it on.
AMD
350GB HDD
2 GB Ram
Windows 7 Home Premium 64 Bit


I could not figure out which category to post in so please help me!
I will give the back story and you can move the thread if you think it's in the wrong place...

Current issue is this>

I press the power button and the fan spins for maybe half a second and then stops - nothing else happens at all. No beeps, no sound, nothing. It's just dead.

Leading up to this was this sequence of events>

My pc was crashing out due to overheating.
It seemed to be that he thermal paste needed re applying.
So I bought thermal paste - followed the regular steps to apply etc, re-fitted the fan.

Powered on machine.
Saw usual start up screens with press del for setup etc.
Then> CPU fan error, press F1 to resume.
(The fan was spinning)
Pressed F1
It seemed as though star up was going to continue but instead screen went blank with just a flashing curser in top right corner.

Tried several re-starts.
Changed connection on CPU fan.
Same issue kept happening, exactly the same.

Went to bios and changed fan boot thing (can't think what it's called) to ignore.

Re-started.
Fan spinning. (no cpu fan error message)
Regulr boot process kicked in
Screen blank, then > Error loading Operating System.

Checked all internal wires etc. Unplugged unnecessary stuff like dvd sata cable etc. Replaced HDD sata cable with new Sata cable.

Re-started.
N... Read more

More replies
Relevance 20.5%

Anyways yesterday I posted about how I accidently uninstalled some preloaded Windows programs, I reinstalled some of them, but now my laptop's all funny. When I connect to The Internet, any program that I open freezes for like 10 minutes, after which it unfreezes. During this time I normally restart my computer, with no success. If I open Windows Live Messenger and Internet Explorer 7 together it freezes normally.
Pinball, WordPad, Sound Recorder, and Volume Control cannot be restored.
Also, I tried using my Toshiba Recovery DVD, with no success. It says Loading RAMDISK Image, then it reboots and loads the exact same system with no changes made. I called in to Toshiba support, a customer service rep and I redid this process, and no success. He says there might be a hard drive corruption so severe that it refuses to accept The DVD.
What can I do?
My computer specs:

Toshiba Satellite a100
Windows XP Home SP2
Intel Centrino dual-core 1.6 GHz
100 GB hard drive
1 GB RAM
DVD-RAM multi-layer burner

Yada yada.
Please help, and if you require any more information I will be glad to provide it.

BTW, I had this exact same problem with my previous laptop, which was the same kind. That one, I returned it to Future Shop and I got it exchanged for this one since it was still 2 weeks of my purchase. It's been 2 months, however, so that option is not open.
Update: When I connect to The Internet, if I try to open ANY programs it freezes, not just IE7 or WLM.
 

Answer:Windows XP error, probably hard drive error, recovery disc not working

My HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 11:19:47 AM, on 29/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\WINDOWS\system32\cisvc.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\tcpsvcs.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\TOSHIBA\TOSHIBA Applet\TAPPSRV.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\DLA\DLACTRLW.EXE
C:\Program Files\TOSHIBA\TOSHIBA Zooming Utility\SmoothView.exe
C:\Program Files\Toshiba\Tvs\TvsTray.exe
C:\Program F... Read more

1 more replies
Relevance 20.5%

 Attach.zip   5.75KB
  0 downloads
 ark.zip   2.47KB
  0 downloadsHi to everyone,

I am plagued by a number of malware on my computer. Thios laptop is a DEll Latitude D830 that runs microsoft xp professional. For one, my internet constantly redirects me to other sites. Most recently it pops open anew Iexplorer window that does not load and causes a win32 error when I am forced to go to the task manager to kill the program. Other times I get a wn32 error or I get something like a "generic service host problem" and my internet crashes and I have to reboot the laptop to get back onto the internet. My Norton anti-virus and my mcafee security can not connect to the internet for live updates even when i am on the internet. Norton's suggested remedies do not work. neither do McAfees. Here is my DDS TEXT:
DDS (Ver_10-12-12.02) - NTFSx86
17:39:42.82 on Sat 01/08/2011
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2046.1194 [GMT -5:00]
============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
svchost.exe
svchost.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Broadcom\ASFIPMon\AsfIpMon.exe
C:\Program Files\In... Read more

Answer:generic host error, win32 error, internet redirecting all the time. please help

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

2 more replies
Relevance 20.5%

I recently have been getting the Error message Windows has encountered a critical error and will close in one minute.
I do not have the Brazilian financial Active X control that became corrupted, or if I do, I cannot find it. I have Vista 32-bit on an Acer Aspire laptop. This message comes up after I login and I can either access the Internet via Safe mode w/Networking, or do a System Restore, at which time the laptop works for about two or three times and then the error message comes back.
Do I have a bug? Please help!!!!

Answer:Error Message 0x80070005 critical error - windows will close in one minute

I followed the preparation guide and when I tried to run dds.scr, the black screen came up really fast and then disappeared and nothing ever came up. When I tried to run RootRepeal.exe, I was able to tell it to scan, but then I never received a report. When I tried to run it again, it said that I didn't have permission, and when I tried to delete it, it said the same thing! I am the administrator...I have Vista 32bit and I am getting the error code 0x80070005 windows has encountered a critical error and will now close. I run system restore to get it to stop, but that only works a few times, and then I get the error message again.
What do I do now??

9 more replies
Relevance 20.5%

We are backing up mailboxes on an Exchange 2007 server and have recently started seeing a backup error on one mailbox out of about 25.

T-597: PtSend: cmd MbeF/msg RdBg: byte count 1041 exceeds maximum of 1024
Trouble reading files, error -523 ( service transaction error)

Anyone know what this means or what we can do to resolve it?

Exchange is on a different server than Retrospect. We are running Exchange 2007 with the latest service packs and updates. Retrospect is version 7.7.620 and the server with Exchange has client version 7.7.114. Let me know if you need any other information. Thanks.*
 

Answer:Solved: Trouble reading files, error -523 ( service transaction error)

How big is that mailbox (both size & item count) & is it significantly larger than other mailboxes in the environment?
It might be worthwhile to move the mailbox to a new database just because if there is any corruption, it'll sort it out. The other option would be to then run an isinteg but that would affect the entire database.

Try to look at the answer here: http://www.filerepairforum.com/forum/microsoft/microsoft-aa/exchange-server/507-corrupt-exchange-edb-files-and-save-it-into-pst

2. I was rescued by it:
EDB Repair Kit
This Exchange EDB repair software is the only tool required for comprehensive, fast and cost-efficient recovery of Exchange server data after serious data corruption accidents.

For more information: http://www.edb.repair/

Hope this helpful.
Regards
 

1 more replies
Relevance 20.5%

Hello,I bought new laptop with Windows Vista oper. system.  I am not able to open some of the CD's. After successfull installation, I clicked on the icon from Start and getting this Run-time error '75'. I was able to open them from my previous laptop (Windows XP), which crashed.Is there any conflict with new oper. system?Thank you

Answer:getting Run-time error '75': Path/File access error on Windows Vista

Return it to the point of sale and make use of your warranty.

1 more replies
Relevance 20.5%

Unit keeps going into critial pathway error loop. Blue screen followed by black screen. Restarts are not working. Had unit scrub by my IT. was working and now issue is back. Is this a processor issue?HP use to be good. This this is a piece! I bought this as a replacement for our older HP. it was great no problem just slower. Totally regreat that move. This is the loaded unit. Bought this from Best Buy. They use to be good? What the hell????Inferior service selling an inferior product is not a winning formula.If someone out there has a fix I am all ears!Here is a list of what does not work:Control escape to repair mode.Restart.Getting unit diagnosis and having scrubbed. ( All this did was remove my 365...)Repair mode.Repairmode advanced.HP customer care..... (All they want to do is sell you additional stuff. Not great at all HP).If I can't get this fixed I am planning on letting everyone know what has happened and how bad HP has dropped the ball.

Answer:HP Envy desktop Error message Critical Path error. Repair li...

Hi @Bigpapa5150,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with blue screen. I will be glad to help you.Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit? Please get back to me so I can help you better.

1 more replies
Relevance 20.5%

Hello again. I continue to have problems requiring some assistance. I am running windows 7 Home, SP1, and I use windows live mail email client to service my email accounts with bellsouth.net (att.yahoo.com).
Over the past year I have been having spells when My ability to send or receive email would result in an error message 0x800CCC90 stating my password is incorrect. I know it is correct because I use it to access my web mail when Live Mail quits. These spells of broken email willl generally correct themselves on their on; however this most receent episode has lasted about two weeks and it's geting a little annoying now. My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement that the problem is my email client and not ATT and ATt support does not include Windows live mail. My mose recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging.

I know the problem is a server problem because my attempt to change my email password resulted in a statement: "There are currently no available options for you to obtain a temporary password for your account. For help retrieving or resetting your password, please contact us."

I appreciate your patience with my rather verbose complaint. Any assistance will be greatly appeciated.

xgdude

Answer:email error windows live mail/server error 0x800CCC90

  
Quote: Originally Posted by xgdude


Hello again. I continue to have problems requiring some assistance. I am running windows 7 Home, SP1, and I use windows live mail email client to service my email accounts with bellsouth.net (att.yahoo.com).
Over the past year I have been having spells when My ability to send or receive email would result in an error message 0x800CCC90 stating my password is incorrect. I know it is correct because I use it to access my web mail when Live Mail quits. These spells of broken email willl generally correct themselves on their on; however this most receent episode has lasted about two weeks and it's geting a little annoying now. My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement that the problem is my email client and not ATT and ATt support does not include Windows live mail. My mose recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging.

I know the problem is a server problem because my attempt to change my email password resulted in a statement: "There are currently no available options for you to obtain a temporary password for your account. For help retrieving or resetting your password, please contact us."

I appreciate your patience with my rather verbose complaint. Any assistance will be greatly appeciated.

xgdude


Try using Micorsoft's new "Outlook.com"... Read more

9 more replies
Relevance 20.5%

Hi Microsoft,
I've been struggling with this problem for a while now.  When a steam games runs for the first time, it does a dx setup (I presume checking your dx installed files and replacing/updating
as necessary).  Well seeing I have Win 7 64 bit and keep it up to date with automatic updates, it should be right up there for DirectX right?  Well I keep getting the recurring problem with a file called xactengine2_4.dll that gives the following
error whenever one of these dx setup instances run.  "The file xactengine 2_4.dll is not designed to run on windows or contains an error."  Then it tells me to install from original media or seek help from a sysad.
Well I hunted around and found a web installer for dx from you guys, downloaded and ran it, only to get the very same error message.  I found the file in the .cab and manally
replaced the one in my windows/system32/ folder but it didn't help.  I found a reference to a similar error message that asked the user to run the SFC /Scannow command, which I did, and it found and repaired some corrupted files.  Still no help.
I really don't know what to try next.  Any help would be greatly appreciated.
Ray

Answer:error on dx setup of steam games - xactengine2_4.dll not designed to run on windows or contains an error.

Hi,
 
Please run this installer and see if it works:
 
DirectX
End-User Runtime Web Installer
 
If the error persists, please try to install it again in Clean Boot environment:
 
How to troubleshoot a problem by performing a clean boot in Windows Vista
or in Windows 7
 
Hope this helps.

 
Thanks.
Nicholas Li - MSFT

2 more replies