Computer Support Forum

transcend pendrive problem

Question: transcend pendrive problem

when i insert my transcend pendrive into my computer it shows insert disk in g drive

Relevance 100%
Preferred Solution: transcend pendrive problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: transcend pendrive problem

Save the contents on another drive and format the pendrive.RegardsSuatCINI

3 more replies
Relevance 79.13%

I can't open or detect my 4 GB transcend pendrive.Plz tell me solution.................

Answer:i can't detect my 4 GB transcend pendrive

Does your computer "Detect New Device and Install Drivers" when you plug it in? Does it work on other computers?

2 more replies
Relevance 79.13%

I had use recovery software and recover the date from pendrive, at the time power failure on my system. Later it works partially, just read the data but not format any file. After i recover another time the pendrive was fully not working. I had tried many steps for recovery through internet. But no use. Is there any possible ways to recovery or not.

Answer:Transcend usb pendrive corrupted

It perhaps gone bad. Did you try it on other PCs?

6 more replies
Relevance 77.9%

pen drive is write protected

Answer:my transcend pendrive is write protected

There is usually a little button on the drive that slides to turn write protection on and off.

2 more replies
Relevance 53.71%

Dear all,
I have a T.Sonic 610 which i purchased some 2years ago.. It was working fine when i connected it to my win7 PC until i formatted the player. Now whenever I connect it to my PC, my PC detects it but shows an error with it.. now I cannot copy anything to it..

Anyone pls help..Vry vry urgent!!
Thanks in advance
 

More replies
Relevance 53.71%

ive spent about 2 hours trying to sort this simple job out to no avail so would be appreciated if someone could help,

i bought a transcend usb 3.0 pcie card today followed the instructions installing it then installed the driver from transcend, rebooted the pc and tested with a new samsung 1tb m3 external drive, files move across but what looks like the same speed as usb 2.0.
everything seems ok in device manager there's no yellow flags.

in all programs theres a new program, Usb 3.0 Host Controller utility ive tried running that but get the message usb 3.0 host controller not found, im guessing this is the reason for the slow speed.

Answer:transcend usb 3.0 and host controller problem

Hi there ... I think your Transcend USB 3.0 Card uses the Renesas Electronics -> USB 3.0 Host Controller Driver .. That should have come with the Driver Download from Transcend Website ... Have to say Renesas Drivers seem to have problems in a lot of Systems .. You can Download this Driver from the Renesas Website .. Sorry do not have any more suggestions ....

9 more replies
Relevance 53.71%

I formated my T.Sonic 610 and now it doesn't play mp3 files. The drivers I have are not working with windows 7. Please advice
 

Answer:problem with T.Sonic 610(MP3 player from Transcend)

Updating it's firmware should fix it. Go here and select your country: http://www.transcend-info.com/global2.asp?ufrom=main
 

2 more replies
Relevance 52.48%

Its a 320 GB mass storage device I bought , model number is TS320GSJ25M, I have formatted this from Vista with FAT32 , I use it in Vista normally and It works perfectly. When i connect it with my desktop where Its XP sp2, then it gets disconnected immidiately after getting connected. I have all my datas backup and I cant use them. Can anybody help me as to why this is hapening and how to recover from this problem. Help is appriciated.
 

Answer:Transcend StoreJet mass storage device Problem

Update XP to SP3
 

1 more replies
Relevance 48.79%

sir,
i have a problem with my pendrive.
when i'm going to disk manag here it shows the unallocated space of my pendrive at that time what i do please help me.

Answer:problem with pendrive

Hi. . .

You can either create a partition and format giving you two partitons or re-format the pen drive in NTFS format. Right click on the area in the disk management box for options.

Regards. . .

jcgriff2

.

3 more replies
Relevance 48.79%
Question: pendrive problem

my pendrive was working in a verry good conditin with good transfrer rate,but suddenly it is not getting detected ,but other pendrives are getting detected in my system.is there anything we can do about pendrive
 

Answer:pendrive problem

Have you tried it in another computer? If it doesn't work on multiple computers then its failed and simply needs to be replaced.
 

1 more replies
Relevance 48.79%

i have a verbatim 2GB store n Go USB pendrive. the problem is i can't accsess my work as the USB slots both at college and on my laptlop won't read my USB pendrive.

hoe can i go about sorting this problem out as i need my work back ASAP
 

Answer:USB pendrive problem

hum; sad to say, it may all be lost. XP has not been kind to USB Flash drives.
The typical user error is to unplug the device without using the Safe To Remove
feature OR its brother right-click-->menu-->Eject

ALL USB Flash devices are formated FAT32 so you might try mounting it on
some other kind of system (Mac / Linux)
 

3 more replies
Relevance 48.79%
Question: Pendrive problem

I am using moserbaer pen drive (4GB) . When i plug it into my USB port, I get the icon of it in system tray but i could not see my pen drive icon in the explorer window.

Not only with pen drive even with the card reader the same problem( i could not see the contents of the memory card)
Please help me.
 

Answer:Pendrive problem

7 more replies
Relevance 48.79%
Question: Pendrive Problem

I was having a problem with my windows laptop, I have a pendrive that I want to install Ubuntu with I already installed all the files to it but when I boot up the laptop it loads windows any help?
Also it is not a problem with the pendrive I tried it on another laptop and the installation booted properly

Answer:Pendrive Problem

Boot into Setup (Bios) and set the First Boot Device to be USB/Key

1 more replies
Relevance 48.79%

Good morning to all.
Since the latest windows 10 update, When I insert a usb pen drive into usb port on my laptop it don't show up I have to go into the File explorer to open the drive,And this is the same with a usb hdd.
Been looking in the auto runs section but failed to solve the problem.
Any Help on this Please, I know its not a major issue but annoying.
Many thanks David.

Answer:USB Pendrive problem

Hi Dafydd,

Go into settings and make sure your AutoPlay is configured to open the folders for removable drives:

more replies
Relevance 48.79%
Question: Pendrive problem

Hello

Today, i bought myself a 512mb pendrive, i wanted to use it, windows recognized it as a removable drive without any problems, so i drag-n-dropped a file onto the drive window, but it froze at 30 percent

Ive tried rebooting but no change, the files were still freezing at 20-50 percent

Ive tried to disconnect, and then connect my pendrive, but this also didnt work

I went to a friend of mine to see if this is because of a badly manufactured pendrive, but at his place everything seems to work out ok

Now, im quite a newb to computers, so if you guys could hook me up with any solutions do this, id be very thankful

My system is winxp sp1
 

Answer:Pendrive problem

first i would say, get sp2 and all the updates, and you'r sure you have no bugs, i would try to copy one file using xp right click. can't get much in 512mb.but clean temps. defrag, run chkdisk, unplug it, restart, nothing else running, try again.
 

1 more replies
Relevance 48.79%

Good morning to all.
Since the latest windows 10 update, When I insert a usb pen drive into usb port on my laptop it don't show up I have to go into the File explorer to open the drive,And this is the same with a usb hdd.
Been looking in the auto runs section but failed to solve the problem.
Any Help on this Please, I know its not a major issue but annoying.
Many thanks David.

More replies
Relevance 48.79%
Question: pendrive problem

i everyone,i bought a pendrive 4gb a week ago n now it isn't working.
'the disk needs to be formatted' apperars upon inserting it n 'windows cannot complete formatting' appears wen i try to format it. i cannot open or explore the pendrive. it also shows zero capacity. i'm using vista home premium, RAM: 4gb and HDD: 250 gb. plz help.
 

Answer:pendrive problem

6 more replies
Relevance 48.79%

when i connect my usb pen drive to my pc it shows 'usb does not recognize' this happend me after i had put it on my friend pc, os is xp, kingston usb pls help me

Answer:problem with usb pendrive

How old is it?  Does it work on another computer?

9 more replies
Relevance 48.38%

I`ve got a problem with Kingston 8Gb pendrive. I plug it in at home (Windows 7) and it works fine. When I plug it in at work (W7 as well), I cannot copy some files. From what I see it stucks at 1.5Gb and when I try to copy more files (regardless of file size) it says that the device is full. Any ideas?

Answer:kingston pendrive problem

Try to format it as NTFS and use it like that instead.

9 more replies
Relevance 48.38%

I use dell laptop N5010 with windows 7. I bought new pendrive sandisk cruzer blade. every  time when I connect it to my laptop it does not appear in my computer. But it appears in devices and printers in control panel. There it shows option of brows files. when i select that i get option of Removable disk H which is faint in color which means i can not use it. If i uninstall drivers of pen drive and reconnect it then it installs driver automatically and work properly. But next time same problem occurs.Each time i need to uninstall driver. this problem was not there with my transcend pendrive.Please guide me.

Answer:problem with working of pendrive

I usually remove all bundled autorun software that comes with pendrives. If you format it clean wiping out the sandisk autorun software that is wasting space on it anyways, you may be able to fix this.

1 more replies
Relevance 48.38%

hi there guys,, i have this pendrive that has my acer aspire one's recovery thing, that i made some time ago,,

i just wanted to know how i can reformat my pendrive, because i need the pendrive to transfer some files,, by the way my pendrive is an HP 2gb usb stick,, hope you can assist me,, thank you in advance,, (",).")
 

Answer:Solved: usb pendrive problem

Plug it into the computer then right click its icon > Format. Enter your desired format and options then press okay.
 

3 more replies
Relevance 48.38%

How can I get my pendrive to it's previous state just by formatting or anything else.

Do I need to update my drivers after os installation for getting wifi worked ?
 

Answer:Pendrive and wifi problem

armahee said:





How can I get my pendrive to it's previous state just by formatting or anything else.Click to expand...

Not sure I follow you. When you format the USB drive it will be blanked.



armahee said:





Do I need to update my drivers after os installation for getting wifi worked ?Click to expand...

You will need to install the drivers for your Netbook after so the wifi will work, yes.
 

3 more replies
Relevance 48.38%

Hello There,

I have a Toshiba Satellite L300-11F laptop, using XP Professional w/ SP3 on it.
It comes with 3 USB ports.
I have an older 1GB pendrive and just recently purchased a Maxell 16GB pendrive.
The pendrive works flawless at work, desktop pc but does not seem to work with the laptop.

I managed to use it only once, since then the laptop USB port simply does not recognize it.
I can tell it as the red led is not flashing and the pendrive can not be accessed.
I tried using the supplied Toshiba USB hub, no luck either

The 2 USB ports are ok as I use mouse, digital camera with it.
So is the 16GB pendrive, it works perfectly using other machines eg desktop pcs

Am I missing some USB drivers or whats the problem ?
Please help as I need to be able to use the unit on the laptop too.

Thank you!

blaze
 

More replies
Relevance 48.38%

I Have Kingston 8Gb Usb 2.0 pendrive,for which actual capacity is 7.45 Gb.

I used my pendrive to record videocon D2H HD Recorder.STB formatted pendrive before used.Also no recordings are done.
But after inserting it in my laptop,windows is showing its capacity as 145Mb after initial formatting.Reformatting the drive dosent solved the issue.Can anyone please help?

Answer:Problem with Kingston 8GB Usb pendrive

Are you confident that you have a genuine 8gb unit, have you ever filled it with data ?
There are lots of fake/counterfeit units running around on ebay etc that are engineered to look like they have a larger capacity than they actually do

8 more replies
Relevance 48.38%

I have a 16gb pendrive. but it is not showing in my computer.I plugin but no drive is showing as removeable disk.I tried to clean it using cmd.But it says virtual disk service error there is no media in the device here is a screenshot of cmd.how can I recover my pendrive?
click here

Answer:problem cleaning pendrive using cmd

Gently press down on the drive, or lift up, in case it is not making contact properly.
Try other USB Ports or another computer
Try USB Oblivion to delete old Registry entries

3 more replies
Relevance 48.38%

Hello,I have bought new pendrive KINSTON 8GB and I have problem to write/copy any data/files on this pendrive on any windows xp/vista.I have this error: Can't copy 'filename': Can't found destination file.DP(1)0-0+7. Data are lost...System starting copy( but very very slow...). Normaly on another PC is possible and is fast but on this PC is not possible.Motherboard: GA-MA790X-GS4, Athlon X2.I have all USB options in BIOS settings needed enabled. I s possible that it coud be problem with my motherboard and why(its new motherboard)? another usb devices working... (my another pendrive not KINGSTON working good BUT another 2GB KINGSTON doesn't working too;/). So my KINGSTON 8GB & 2GB doesn't working BUT only on that PC... AND only KINGSTON doesn't working because another pendrives and usb device working on that PC. funny??? thx for reply

Answer:USB Pendrive KINGSTON problem

Try the suspect drives on another machine just to make sure. 

12 more replies
Relevance 48.38%

hi

I got a Usb 2.0 1GB pendrive and i use windows 2000 Service pack 4.

Windows recognises the pendrive as Drive letter F.

When i double click to open the pen drive, i'am prompted to
FORMAT the drive.

During format process upon reaching the 100% windows says
that it was unable to format the pen!!!!

Ive tried admistrative tools computer management also it cannot
successfully complete the 100% format!!!!

Ive even used FAT32 and NTFS same problem cant format, upon reaching 100% windows prompt me "unable to format"!!!

Can i have some help in fixing this problem please!!!

thanks
wassim

Answer:USB2.0 Pendrive problem

Update your USB drivers.

3 more replies
Relevance 47.97%

HI,
There is a solution for Pendrive not detecting or usb drive not visible in My computer and device manager.
Recently I had a problem with Sandisk Cruzer Micro 4 gb pendrive. When I inserted the pen drive the system is detecting but it is not visible in Windoes explorer and device manager. But it is working in other computers. So it is not damaged or virus infected. If you Open Disk management there you will find your pendrive without any drive letter.
Here the problem is not with the pendrive, it is with the system. To resolve this I tried in many ways and installed driver detecting softwares, but there is no use. Finally I succeeded in the following method.
The problem occured because unexpectedly the drive was un-mounted.
1) To solve you should have Administrator privilages on your local system.
2) Later go to Local security policy select Local policies in that select Audit policy and select Audit object access and check Success and apply.
3) From RUN, type diskpart and right click on it and select Run as Administrator
4) At the DISKPART prompt, type automount press enter
next type recover press enter
next type rescan press enter and exit
5) In Device manager under storage devices find your device not recognized and uninstall it.
6) Unplug the device and plug it again then the driver automatically installs and it is mounted to your computer. You will get the autoplay window.
Thats it.

 

Answer:Solution for pendrive not visible problem

This is the only and unique one that was worked!!!n awsome!!
how did u found it???
 

3 more replies
Relevance 47.97%

Hi!
First of all my English is not perfect and I'm new here. The problem is with my friends notebook. Her laptop got infected probably from pendrive. She only has MBAM and sent me 2 screens what could it be. When she plugs other pendrive the only thing she can see is shortcut, and sometimes when she plug pendrive (not always) MBAM show info about virus/infection.

Answer:Problem with pendrive, Gamarue infection?

Hello and welcome to Bleeping Computer Win32/Gamarue is a worm that spreads via emails and flash drives. You will need an antivirus to detect it - Malwarebytes Anti-Malware is not meant to be used against worms.Due to the nature of this infection, I must warn you of the following...Looking through your logs I noticed that your machine is infected with a backdoor Trojan.They allows hackers to remotely control your computer, steal critical system information and download and execute files.If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please change all your passwords on a known clean and secure machine, and it would be wise to contact those same financial institutions to apprise them of your situation.Though the trojan has been identified and can be removed, because of it's backdoor functionality, your PC is very likely compromised and there is no way to be sure your computer can ever again be trusted. Many experts in the security community believe that once infected with this type of trojan, the best course of action would be a reformat and reinstall of the OS. Please read these for more information:How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?When Should I Format, How Should I ReinstallWe can still clean this machine but I can't guarantee that it will be 100% secure afterwards. Let me know what you decide to do.Regards,Alex

9 more replies
Relevance 47.97%

Hello There,

I have a Toshiba Satellite L300-11F laptop. It comes with 3 USB ports.
I have an older 1GB pendrive and just recently purchased a Maxell 16GB pendrive.
The pendrive works flawless at work, desktop pc but does not seem to work with the laptop.

I managed to use it only once, since then the laptop USB port simply does not recognize it.
I can tell it as the red led is not flashing and the pendrive can not be accessed.
I tried using the supplied Toshiba USB hub, no luck either

The 2 USB ports are ok as I use mouse, digital camera with it.
So is the 16GB pendrive, it works perfectly using other machines eg desktop pcs

Am I missing some USB drivers or whats the problem ?
Please help as I need to be able to use the unit on the laptop too.

Thank you!

blaze
 

Answer:Maxell 16GB pendrive problem : HELP PLS !

I'm doubting its drivers but you said something I want a little more information on.

supplied Toshiba USB hubClick to expand...

Was this a powered Toshiba usb hub or unpowered?

If unpowered do you have access to a powered one?
 

2 more replies
Relevance 47.97%

Hello there,

I'm having problems with my pendrive and windows7.

When I connect it, it is allright. I can read it, view all files, copy them from pendrive to HDD, delete them, etc.

The problem occurs when I try to write some file. Windows start to copy it but in the middle of the transfer it crashes and says me that my Pendrive is no longer connected. I have to disconnect my device and reconnect it to get it "work" again.

I read a lot of threads about this issue but I can't solved it. Please I need help.

I'm using Windows 7 RC Build 7100 on my HP TX2 1020us. I don't know what drivers could help.

Thanks in advance

Answer:Usb flash drive or pendrive problem

  
Quote: Originally Posted by VictorV


Hello there,

I'm having problems with my pendrive and windows7.

When I connect it, it is allright. I can read it, view all files, copy them from pendrive to HDD, delete them, etc.

The problem occurs when I try to write some file. Windows start to copy it but in the middle of the transfer it crashes and says me that my Pendrive is no longer connected. I have to disconnect my device and reconnect it to get it "work" again.

I read a lot of threads about this issue but I can't solved it. Please I need help.

I'm using Windows 7 RC Build 7100 on my HP TX2 1020us. I don't know what drivers could help.

Thanks in advance


Hi Victor,

Can you try it in another PC?

Try checking the drive for errors

Try formatting the Drive

I hope this helps

Pooch

9 more replies
Relevance 47.97%

hello tech guys

when i try to copy an ISO file(6.70GB) from PC to a pen drive (16GB) it says :The file is too large for the destination file system.I don't know what is this.please help me.
thank you.
 

Answer:problem in copying files from PC to pendrive

7 more replies
Relevance 46.74%

Hi whenever i try to open my external hard disk n pendrive i get this error : Can not find script file "G:\autorun.vbs". But ONLY with my USB all my local drivers working perfect. I probably deleted the file with avg which detected it as a trojan. i need some help.... Any help appreciated!!!!
 

Answer:Autorun.vbs problem in external hard disk n pendrive

9 more replies
Relevance 46.74%

Hi,

I had a problem with my Windows 7 laptop. It starts when I trying copying some stuff from my netbook to the my Windows 7 laptop via pendrive. I cannot click directly because it shows:

F:\
Application not found.

The popup above didn't come if the pendrive doesn't have any stuff. Beside that, the files that copied from pendrive can be corrupted. I had formatted my pendrive many times but the issue still exist.

Please help.........

More replies
Relevance 44.69%

my pendrive is detected but other pendrives are not detected my lapy.
i have windows 7 pro os registered but i dont have product key. i forgott my key.
now my windows 7 is format so i need product key.
could you please give a my win 7 pro product key?

More replies
Relevance 42.64%
Question: transcend storejet

hi,
i have a 320gb transcend storejet external HD that i want to format.
will this cause any problems if i do?

thanks!
 

Answer:transcend storejet

Hi barnacle, is this external drive just for storage, as in you can boot your computer without it connected?

Do you not need any of the data on it?
If it is just for storage and you dont need any dta from it then you can format it no problem.

Just go to "my computer" find the drive listed and "right click" on it, then select "format"
it should have "NTFS" as the default, if it isn't select it. and DONT do a "quick format" it is not good
for longevity.

Q
 

16 more replies
Relevance 42.64%

Hi ,

My Transcend StoreJet 25M3 2.5-inch 1TB Portable External Hard Drive, not working last few days. Normally Blue led glow... But now it not glowing. Its not detecting. I checked with Disk management, Device manager . It not showing My HDD. what problem will be there? Cable or HDD ? I not check the cable. Its USB 3.0 cable . So my friends no has it. What i do? If HDD problem means how i recover my files? I need my backup. But it not working now. I have warranty. If i give to Transcend Service center. They will recover my files to me... Pls help me anyone.....

Thanks in advance...
By
Mani

Answer:Transcend HDD Not detecting.

Hello and welcome mani mate is the drive showing in the BIOS or DISKPART??

Some system specs too please System Info - See Your System Specs

Can I ask too just out of curiosity why you are running ultimate on a laptop ? a business one?

2 more replies
Relevance 42.64%

hiii all...i am unable to use my pen drive from the last few days...error showing usb device not recognised...what it is...it never happend before...any idea how to overcome such error...i have lot of data stored in it....

waiting for reply..
narend
 

More replies
Relevance 42.23%

i hav transcend pen drive 8gb

i installed windows 7 on my pc
when i plugged device it shows usb device not recgnise..
all drivers bios r up to date.. latest r installed..
why is it so?

motherboard is intel DP55WG RAM 4GB DDR3 INTEL I5 750M PROCESSOR..

NVIDIA 9600GT GRAPHICS CARD..

Answer:8 GB Transcend USB drive not recognized

  
Quote: Originally Posted by drgopalga


i hav transcend pen drive 8gb

i installed windows 7 on my pc
when i plugged device it shows usb device not recgnise..
all drivers bios r up to date.. latest r installed..
why is it so?

motherboard is intel DP55WG RAM 4GB DDR3 INTEL I5 750M PROCESSOR..

NVIDIA 9600GT GRAPHICS CARD..



welcome !
when you plug device, try to check your device manager. make sure that driver already install in your system.

4 more replies
Relevance 42.23%

i cannot copy ,delete, formattry chkdskformat utility from transcend.all can't workmessage"disk/media is write protected"help!!!

Answer:usb 2gb transcend write protected!!!

Can you give more information about this please?  The make and name of the product.  That way we could look up some information to help you with.  Also has it worked fine before?  Is this something that started happening after you did something with the device?  Things of that nature will help us find a solution for you.In the meantime I would like to refer you here.  This is their website and the contact tech support section.  I hope that helps you out a little bit.

14 more replies
Relevance 42.23%

The description is a bit long, so I apologize for it in advance.
My desktop is Win 7 Home Prm upgrade from Vista. Intel quad, 4gb RAM. My laptop is Win 7 Home Prm OEM. Intel Duo, 4 gb RAM. My new external HDD is Transcend 500gb25M. I try desktop install first. Won't recognize it. I finally find that it has no drive number, so use Disk Mgmt and assign one. All fine at that point EXCEPT that it will not install a built-in software package. I send it back and get another. Then I start with install on my laptop. Instant recognition and drive letter assignment. Also immediate install of the software package, which has things that I want to use. OK at that point. Part of the package is an Autorun feature that brings up the special menu whenever you plug the drive into a USB port and it starts up. All looks good on the laptop now and all works as it should.

Next, plug the ext hdd into the desktop. The hdd starts, and the small Windows autorun notice appears (not the one from the software package as on the laptop) asking if I want to see its files. OK, and it just shows me a series of the empty default folders defined in the special software package that I had just installed on the ext. hdd. However the Menu from that package does not open and there is no way to get it to open, so essentially the ext hdd won't function on the Desktop using its internal software pack.

From the Desktop I found that I can write to the ext hdd using my file manager and Backup Image, b... Read more

Answer:2 comps + Transcend ext hdd = problems

  
Quote: Originally Posted by roving


The description is a bit long, so I apologize for it in advance.
My desktop is Win 7 Home Prm upgrade from Vista. Intel quad, 4gb RAM. My laptop is Win 7 Home Prm OEM. Intel Duo, 4 gb RAM. My new external HDD is Transcend 500gb25M. I try desktop install first. Won't recognize it. I finally find that it has no drive number, so use Disk Mgmt and assign one. All fine at that point EXCEPT that it will not install a built-in software package. I send it back and get another. Then I start with install on my laptop. Instant recognition and drive letter assignment. Also immediate install of the software package, which has things that I want to use. OK at that point. Part of the package is an Autorun feature that brings up the special menu whenever you plug the drive into a USB port and it starts up. All looks good on the laptop now and all works as it should.

Next, plug the ext hdd into the desktop. The hdd starts, and the small Windows autorun notice appears (not the one from the software package as on the laptop) asking if I want to see its files. OK, and it just shows me a series of the empty default folders defined in the special software package that I had just installed on the ext. hdd. However the Menu from that package does not open and there is no way to get it to open, so essentially the ext hdd won't function on the Desktop using its internal software pack.

From the Desktop I found t... Read more

3 more replies
Relevance 42.23%

I would like to get hold of a Transcend TS-AVE3 motherboard (discountinued Oct 2003, company does not sell it any more). Any ideas?

Answer:Transcend TS-AVE3 motherboard

Nothing on Ebay at the moment .... Ashley

1 more replies
Relevance 42.23%

i have a Transcend flash disk 4gb when ever i put data or anything it gets corrupted i can t view it or open it i can t format the flash to ntf i can only format to exfat or fat32 so it doesnt work how can i solve it..


regards

zain

Answer:Transcend flash disk 4gb

Have you tried to eject it in windows, before you take it out.

6 more replies
Relevance 42.23%

Hi
I have a 1tb Transcend storejet ehd and has always worked fine since I got it a few months ago till today last night I left it plugged in with my laptop open and this morning it wasn't listed in my computer
I have restarted the laptop and tried all usb ports but nothing.
It is showing up though under devices and printers and I did the troubleshooter and nothing
I read online about going in computer management and earlier under disk management it was not showing at the top but was showing at the bottom in those box bits but I ejected it and took it round my friends to see if it would work on his laptop and it was just doing the same as mine not being under my computer but since I got home it isn't showing at the bottom of disk management although it is still under devices and printers.
I really don't know what else to do I am so worried because it has every photo and video of my youngest daughters on there since they were born and I was in the process of backing it all up on another ehd when this happened please It would mean so much if someone could help me to try and get it working or recovering everything on it
Thanks
 

Answer:Transcend 1tb ehd not showing in my computer

could be the enclosure it is in, assuming the internal HD is SATA. You could try a "caddy" usb to sata from someplace like newegg , open up the external caddy you have now and swap the hard drive over...or if you have access to a desktop with SATA hook your hard drive from the caddy up to one of the sata ports, use windows explorer to see if you can see the drive. also see if the drive shows in the bios.
 

1 more replies
Relevance 42.23%

Hi...im varun from India....I have a 320GB Store Jet and today I used secure zip to encrypt all my photos...when the encryption was almost done it came up with an error stating that a particular file could not be encrypted...and because of that many of my files were not encrypted....thats not the problem,..

After the encryption i wanted to decrypt it back...and when i looked at the StoreJet Elite Program there was no option to decrypt it....i was only able to start encrypting again and the "My Folder" Checkbox present on the right was grey-ed out(i.e. i couldnt tick it) So i cant decrypt the files and the files are not visible in explorer and now theres no way to decrypt it with the Storejet elite program....so I have no idea to as to how i can decrypt it....somebody PLEASE HELP ME those photos are really special to me....i just cant afford to lose them.....

1 more thing i would like to point out is that the photos are present in the my folder directory. Theyre not visible but when we look at the properties of the folder it shows 719MB...indicating that the photos are present in an invisibe and encrypted form....Therefore i need some help in decrypting the encrypted file....ANY HELP WILL BE GREATLY APPRECIATED!! Thank You
:cry:cry:cry
 

Answer:transcend storejet elite

Are you using Securezip Desktop?
http://www.pkware.com/support/desktop
If so, you might need to contact them.
If you are using some sort of program included with your StoreJet Elite, then you want to contact the Transcend company instead.
http://www.transcend.co.in/support/index_techsupport.asp
 

1 more replies
Relevance 42.23%

Im thinking about bying one of these cards. Either the SE or PRO.
Now, do you have any experience about Transcennd manufactured videocards? Are they good and wich one should i buy?
 

Answer:Transcend Radeon 9600

If I were you, I'd buy a Sapphire card because they are very good.

Also, don't buy the "SE" because it sucks Buy a Pro or XT.
 

9 more replies
Relevance 42.23%

hi there i have a 32 gig transcend jf v30 1 day i decided 2 format it so i could sell it but i forgot about the protected files on it and now i cant put any files on it because it asks me 2 format it every time seing as i am a 15 year old it technician i need dis badly plz help i atached some images
 

Answer:Can't format my 32GB Transcend jf v30

Have you tried
HP USB Disk Storage Format Tool

It is available for download several places, including CNET.
 

6 more replies
Relevance 42.23%

on linux the move to trash option is disabled and the delete button on the keyboard is disabled and on windows it gives me an error when i hit the delete button...its like the file/folder is still being used or i dont have permission...and yes am the administrator on my computer. what could be wong or what can i do. i can stil send stuff to it though. thanx for your help in advance

Answer:i cant delete files from my transcend 640 gb

The file attributes may be set to "read only".

2 more replies
Relevance 42.23%

i just bought a 320gb transcend storejet drive.
it comes bundled with their storejet elite software that enables one touch backup.
but,, the stuff i want to backup is on a second internal drive that i see no option to backup from? the options they offer only exist on the primary drive.
any help with this,, i probably don't understand their instructions very well.
and their forum was no help.

thanks!
 

More replies
Relevance 42.23%

Hi
I have a 1tb Transcend storejet ehd and has always worked fine since I got it a few months ago till today last night I left it plugged in with my laptop open and this morning it wasn't listed in my computer
I have restarted the laptop and tried all usb ports but nothing.
It is showing up though under devices and printers and I did the troubleshooter and nothing
I read online about going in computer management and earlier under disk management it was not showing at the top but was showing at the bottom in those box bits but I ejected it and took it round my friends to see if it would work on his laptop and it was just doing the same as mine not being under my computer but since I got home it isn't showing at the bottom of disk management although it is still under devices and printers.
I really don't know what else to do I am so worried because it has every photo and video of my youngest daughters on there since they were born and I was in the process of backing it all up on another ehd when this happened please It would mean so much if someone could help me to try and get it working or recovering everything on it
Thanks

Answer:Transcend 1tb ehd not showing in my computer

Welcome to the forum what doe sit show as in devices is as a hard drive or other. Have you tried another usb cable

3 more replies
Relevance 41.82%

I've recently received my new X250, but since it only came with 180GB SSD, I've decided to get M.2 Transcend 256GB drive. Installation went fine, drive could be seen and accessed from the OS, and all seemed good. After few days I've started noticing the drive randomly disappearing from My Computer, and BIOS messages about M.2 error. Usually power off/on would fix the issue.The drive is TS256GMTS400, with firmware N1114H. I've tried the Transcend software (SSD Scope), but it would not detect my drive.So the next step was the support - I was advised that this revision of the drive has known compatibility issue with X250, and I need to send it back to be replaced with newer version. I was told that it is not possible to just upgrade firmware on this drive.I've stupidly decided to give it a chance, and unfortunately just few days later the drive has stopped working - not visible from BIOS anymore, and the system would bluescreen on restart. I'm not sure yet if I've lost any data (fortunately not much there) - I'm waiting for M.2-USB3 cable to test the drive this way.I am obviosuly now going to send it back. The computer now works fine after I've removed it.Beware of Transcend M.2 drives for your X250!!!

Answer:X250 and Transcend M.2 drive - beware!

Just wanted to give some update:1. Transcend support reacted very quickly and supplied me with anogher drive with newer and supposedly compatible firmware.2. Drive was fine, not dissapearing as the previous one.3. Two weeks later the drive died in exactly same way as the previous one losing all the data that was on it.I managed to get Amazon to refund me at least. Still need some drive though.

1 more replies
Relevance 41.82%

I bought a new 4GB transcend pen drive but it was not detected on vista as well as on window XP. and my old pendrive of Sandisk of 2GB working properly is now not working on any window after connecting to vista pc.
please solve my problem...........
 

More replies
Relevance 41.82%

pls help

i have a transcend JF V30/2GB pen drive...it works perfectly well with my Win Xp computer...but it does not open in the Windows Vista x32bit laptop. the error message says that driver is not found.
even if i try to install driver via accessing c:\windows\system32 the error message says although driver found cannot install it and contact vendor

please help
 

Answer:Transcend USB pen drive not opening in vista

guys i need help here...pls do tell
 

1 more replies
Relevance 41.82%

My newly purchased laptop has issues with 3r party M.2 SSD, that I have installed additionally.Symptoms: When just boot up, SSD is recognized by BIOS and OS, everything seem to work smoothly. But after 10~20 minutes of operation, SSD suddenly dissapears form the system. "Device manager" cannot find SSD, BIOS cannot detect it as well. Reboot does not help.If computer go into sleep or complete shut down, I'm able to use SSD for another 10~20 minutes. SSD model: Transcend 256GMTS400My Machine: ThinkPad Yoga 460 (20EL0016RT), OS Win 10 Pro x64 All possible updates from Lenovo companion are applied, All possible Windows updates are applied.BIOS version 1.4 (latest one from support page). SSD has latest availible firmware. Transcend tecchnical support is not responsive, they just say this should be related to BIOS and not the problem of their SSD. Please help! How to make this SSD work with my ThinkPad Yoga?

More replies
Relevance 41.82%

I can't find a slot for inserting Transcend SD 2 GB on my Dell desktop computer, it has only slots for USB flash drive. Thanks for help.

Answer:How to install Transcend SD on Dell Desktop

Does your desktop come equipped with a card reader? If not you can get a usb card reader for next to nothing these days or you can get a 3.5" internal card reader and install it in your PC.

5 more replies
Relevance 41.82%

The problem: transfer rates with my USB drive, normally 14-16 MB/s, sometimes drop to ~1 MB/s. When the speeds slow, checking the drive properties suggests the drive is connected to a USB 1.1 port. The speeds are a bit of an issue as I need to transfer outlook pst's (~4-5 GB at a time) to and from the USB drive each day - normally it is a few minutes, but when speeds slow it can take >1 hr.

Strangely, while one drive may seem to be connected to a USB 1.1 port, another drive connected at the same time reports it is connected to a USB 2.0 port. Equally strangely, the reported speed a port has will change (today the middle port is stuck at USB 1.1 speeds; tomorrow the middle port is OK but the far left port is stuck at USB 1.1. speeds).

I am running Win 7 ultiimate x64 on a Dell Latitude D6420 with 3 USB 2.0 ports and an eSATA port. I am using Transcend 32GB and 64B USB sticks ("ultrafast" = V600). The appropriate drivers from Dell are all installed and Device Manager shows no problems with the USB drives. All drivers are up to date according to Windows. One of the USB drives is formatted as exFAT and the other as NTFS. Connecting the USB stick to the eSATA / USB port does not ever seem to give me USB 1.1 transfer speeds.

Some earlier posts on the subject suggest some ideas (update drivers, format as NTFS). None seem very applicable to my problem. For example:
8gb Transcend Flash Drive with slow read/write speeds
Slow USB transfer

THANKS for any suggestions.

Answer:Transcend 32GB USB slow transfer - USB 2.0 becomes 1.1?

what is the composition of the data being transferred (a lot of small files? how big?)? Is it always like that?

theoretically, file transfer speeds of pendrives suck when asked to write a lot of small files.

2 more replies
Relevance 41.82%

Today in a scufffle vd my lil sister i dropped my Transcend Storejet25p 500 Gb Portable External Harddrive on floor just from a height from my tummy to floor..!!
is there any hope of data recovery or repair at home !!'
that drive contains my lifetime memory of Studying in London !
PLEASE HELP !!

The Drive's LED just lights up when connected & inside there is a clicking sounf like tick tick tick-tick tick tick-..............& then it stops making sound !
temperature/warmth of drive is normal !!
 

Answer:Dropped my Transcend Storejet25p 5oo gb on floor

When a harddrive makes a clicking or ticking sound that isnt good.If it was dropped that didnt help.hopefully maybe a usb sata/ide connector might be able to help you retrieve anything on there that you dont want to lose before the drive goes completely.if that doesnt work having the data retrieved by a professional could cost a lot of money and even then might not be able to be done.all harddrives can fail for many reasons whether its an internal or external one.its best that if you dont want to lose anything valuable to save things to a cd/dvd so it will be safe for a long time.
 

2 more replies
Relevance 41.82%

Hi,

I have a Transcend jet Flash 110 (1GB) with me. I bought it from Taiwan. It is under warranty period. Now when i connect the drive to my USB port i am getting a message like " Do you want to format your drive now?" Even if i click yes, it wont do anything. The same message keeps on coming.
Any idea why this is coming?
Also, is there any service centers for Transcend in india?
Thanks,
sreeja
 

Answer:Problems with Transcend Flash drive

stickys are there to answer FAQs:

read: http://www.techspot.com/vb/topic45647.html

ensure you have drivers to your stick if it is new.
 

2 more replies
Relevance 41.82%

My newly purchased laptop has issues with 3r party M.2 SSD, that I have installed additionally.Symptoms: When just boot up, SSD is recognized by BIOS and OS, everything seem to work smoothly. But after 10~20 minutes of operation, SSD suddenly dissapears form the system. "Device manager" cannot find SSD, BIOS cannot detect it as well. Reboot does not help.If computer go into sleep or complete shut down, I'm able to use SSD for another 10~20 minutes. SSD model: Transcend 256GMTS400My Machine: ThinkPad Yoga 460 (20EL0016RT), OS Win 10 Pro x64 All possible updates from Lenovo companion are applied, All possible Windows updates are applied.BIOS version 1.4 (latest one from support page). SSD has latest availible firmware. Transcend tecchnical support is not responsive, they just say this should be related to BIOS and not the problem of their SSD. Please help! How to make this SSD work with my ThinkPad Yoga?

More replies
Relevance 41.82%

Hi All,
My laptop is Dell Latitude E6330, with latest BIOS ver A17
The existing BIOS is legacy, and the Windows 10 in the laptop is MBR type.
I cloned it using Transcend SSD Scope but it is not bootable. (Checked in the SSD Scope, its firmware is latest)
I have tried using Windows 10 dvd to boot and direct install into the SSD. Both BIOS/MBR and UEFI/GPT unable to proceed the Windows 10 installation.
Does this Transcend SSD370S compatible to Dell Latitude E6330 ?

Please help. Thanks.

More replies
Relevance 41.82%

I have a USB Flash Drive here, Transcend JF V60, serial number D33193.

To be clear, there is no mistake about the serial number. It is clearly marked and no part is obscured or rubbed off.

The drive is recognized well enough by Windows that it assignes a drive letter; but, when I attempt to access it, Windows instructs me there is no disk in the drive. It is as though Windows "thinks" it is a CD or DVD drive that contains no disk.

I went to the Transcend site and they suggest I download and run a utility from one of these address (both are the same):

http://www.transcend.nl/Products/online_recovery_1.asp
http://www.transcendusa.com/Products/online_recovery_1.asp

Problem is the utility is asking for a 10-digit serial number and there is no such serial number on the device.

Now here's what I want to know: Is there a utility out there somewhere that might repair this flash drive? The one from Transcend is useless.
 

Answer:Transcend USB Flash Drive fails

Alex Ethridge said:


Problem is the utility is asking for a 10-digit serial number and there is no such serial number on the device.Click to expand...

Are you talking about the S/N entry box in the pages you linked to or were you able to download and install the software and it asks for a S/N?

FWiW, if it is the first case, the page has a link to how to find the S/N for each model. I wrote down the example S/N for the V60 and tried it (minus dashes) in the S/N entry box. It seemed to work and took me to a page with a download link for a zip file for the program. Not sure if it will ask for any S/N if you try to download, install and launch the program.
 

2 more replies
Relevance 41.82%

I am attempting to take ownership of files using the following steps in Windows XP Professional SP3:1. I open the Security Properties tab by right-clicking on the folder, clicking Properties, and clicking the tab labeled Security.2. I click the Advanced button. The Advanced Security Settings window opens.3. In the new window, I click the Owner tab.4. I select the Administrators group by selecting Administrators (COMPUTERNAME\Administrators) in the list.5. I tick Replace owner on subcontainers and objects.6. I click OK to dismiss the Advanced Security Settings window.7. I click OK to dismiss the Properties window.This grants me ownership of the folder for which I'm opening the properties window, but not the folders or files beneath it, which I would like as well. I can set the security properties on each object and subcontainer individually, but I would like to do it all at once.First post BTW.

Answer:Object Ownership won't transcend tree

I had this problem on earlier versions of XP, but it seems to be working better now.
Are you up to date on Windows Updates?

In the "old days" it was common to have to burrow your way down through the directory structure because Windows was a bit flakey about applying permissions/ownership.
Another way is to use cacls or xcacls to change the permissions (but I haven't used those tools in a long, long time).

3 more replies
Relevance 41.82%

Hi,
I recently purchased Transcend 320gb external hard drive. The file system is in FAT32 preformatted . However my winXP sp2 has NTFS file system. Do I need to format the External Hard Disk to NTFS system too? Or I can just start storing it in FAT32 system

Are there any advantages and Disadvantages? I have checked many sites and found lots of variable ideas. So I am confused. Personally I prefer NTFS system (just because I have been using it for long)

Please do advise me.

Thanking you in advance
Wolfhammer
 

Answer:Solved: about Transcend 320gb External HD

You can start storing in FAT32. The drawback is if you want to store very large individual files (like in excess of 4GB). If you want to do that, you actually will need third-party software to reformat that drive to NTFS. Otherwise I'd leave it as is.
 

3 more replies
Relevance 41.82%

I just purchased the following transcend 16GB DDR4 400 SO-DIMM RAM.  It's on sale for $100 bucks on Amazon so it looked like a  great deal. However, i have some concerns it may not fit in my XPS 9550 laptop.  Can someone who is more knowledgeable with this laptop and ram advise?

Answer:Transcend DDR4 2400 memory

You really should ask Transcend about compatibility.  

1 more replies
Relevance 41.82%

So I can’t read this Japanese press release very well, even after it is translated but I do know that I want a 16GB flash drive to carry around all my pr0…errr, files and stuff.



JetFlash™ is designed, being slim, in order with USB2.0 flash drive of high speed and bulk, to fit to busy life style. JetFlash of 16GB which this time joins to line-up was designed because of the high end user which desires the USB memory of especially big capacity.

http://www.transcend.co.jp/Press/ind...tail&PrsNo=271

Answer:16GB Transcend JetFlash Thumbdrives

I think samsung has made a 46 gig thumb drive. So I dont see what the big deal about this one is.

4 more replies
Relevance 41.82%

Folks, I would really appreciate your thoughts and inputs.  I am trying to avoid surprises and reinventing the wheel. I have a freshly ordered minimalist W550s.  I will be upgrading the following steps: 1. 4GB ordered to 16GB Crucial DDR3L kit 2. Empty m.2 slot to Transcend 256GB, intended as boot drive 3. 500 GB HDD ordered to Samsung 1TB 850 Pro SSD I have no issues physically installing any of these - it's the migration process I want to be clear on, and could use a bit of validation for my plan... General question:  Any good reason to power up BEFORE I make these changes? The plan: 1. Pull the 500GB HDD and install the Samsung SSD, and the Transcend m.2 drive at the same time.  (Also swap memory). 2. ICreate a bootable Acronis USB key on my desktop 3. Attach the removed 500GB HDD to the W550s using a USB to 2.5" adapter I have. 4. Attach the Acronis USB key,  5. Power up, and hit the bios key to select boot source, going to the Acronis USB Key to boot. 6. Directly clone the stock HDD to the Transcend m.2 drive, making it bootable. 7. Remove all the keys and adapters and reboot. 8. Add the Samsung SSD as an additional drive.  Does this make sense?  Any suggestions or anything I am overlooking? Is there a different way of accomplishing this that you think is better or more practical/safer? Thanks! Tom

Answer:W550s 850 Pro 1TB + Transcend 256GB m.2 upgrades

What you first want to do is checking if everything works, perform a diagnostic test with Lenovo Solution Center and test the RAM.If something doesn't work, and tech support needs to check if the hardware replacement worked, then they can quickly use the factory Windows version from Lenovo.Plus you may want to clone the recovery partition or maybe create recovery media from it.

3 more replies
Relevance 41.41%

SO I have a 1 TB Transcend Hard disk and it use to work perfectly flawless before I updated my windows 10 now after I have updated my windows 10 my laptop does not detect my Hard disk I can see it in my disk Management but can't change the disk letter so that specific solution is useless. Also I have checked on my other laptop with windows 10 and the hard disk is detected there and works fine.

Please help as I don't want to format the hard disk I don't have enough space in my other laptop to backup all the data that is in my hard disk and neither do I have money right now to buy the new hard disk and transfer all stuff there so can you provide a solution for it?

Answer:My windows 10 laptop does not detect my Transcend 1TB externalHDD

Originally Posted by reawaken


SO I have a 1 TB Transcend Hard disk and it use to work perfectly flawless before I updated my windows 10 now after I have updated my windows 10 my laptop does not detect my Hard disk I can see it in my disk Management but can't change the disk letter so that specific solution is useless. Also I have checked on my other laptop with windows 10 and the hard disk is detected there and works fine.

Please help as I don't want to format the hard disk I don't have enough space in my other laptop to backup all the data that is in my hard disk and neither do I have money right now to buy the new hard disk and transfer all stuff there so can you provide a solution for it?



I did a Search and found that drive may need a USB 3.0 port and depending upon the age of your Notebook you may have only USB 2.0 ports.
Transcend hard disk drive at DuckDuckGo
Supposedly the USB 3.0 drives can be backward compatible to USB 2.0 but that's really no guarantee. Most times the USB 2.0 ports have a black 'tongue' while the USB 3.0 ports are blue.

1 more replies
Relevance 41.41%

TS256GMTS400:http://www.amazon.com/Transcend-MTS400-Solid-State-TS256GMTS400/dp/B00KLTPUG4$135, 70K/40K IOPS, 560/160 MB/s, unknown controller (I'm not sure, can anyone update?), transcend NAND Flash MDM242-SB-256http://www.mydigitaldiscount.com/mydigitalssd-256gb-super-boot-drive-42mm-sata-iii-6g-m.2-2242-ngff-...$160+$4 shipping, unknown IOPS, 545/410 MB/s, Phison S9 Series (PS3109) Controller, Toshiba A19nm MLC Toggle NAND Flash Does anyone have real world performance comparison of this two? Which one should I buy?

Answer:Transcend VS MyDigitalSSD on 2242 M.2 NGFF 256GB SSD

Same question.

5 more replies
Relevance 41.41%

SO I have a 1 TB Transcend Hard disk and it use to work perfectly flawless before I updated my windows 10 now after I have updated my windows 10 my laptop does not detect my Hard disk I can see it in my disk Management but can't change the disk letter so that specific solution is useless. Also I have checked on my other laptop with windows 10 and the hard disk is detected there and works fine.

Please help as I don't want to format the hard disk I don't have enough space in my other laptop to backup all the data that is in my hard disk and neither do I have money right now to buy the new hard disk and transfer all stuff there so can you provide a solution for it?
For more information refer the pictures!

Answer:My windows 10 laptop does not detect my Transcend 1TB externalHDD

reawaken said:

SO I have a 1 TB Transcend Hard disk and it use to work perfectly flawless before I updated my windows 10 now after I have updated my windows 10 my laptop does not detect my Hard disk I can see it in my disk Management but can't change the disk letter so that specific solution is useless. Also I have checked on my other laptop with windows 10 and the hard disk is detected there and works fine.

Please help as I don't want to format the hard disk I don't have enough space in my other laptop to backup all the data that is in my hard disk and neither do I have money right now to buy the new hard disk and transfer all stuff there so can you provide a solution for it?



I did a Search and found that drive may need a USB 3.0 port and depending upon the age of your Notebook you may have only USB 2.0 ports.
Transcend hard disk drive at DuckDuckGo
Supposedly the USB 3.0 drives can be backward compatible to USB 2.0 but that's really no guarantee. Most times the USB 2.0 ports have a black 'tongue' while the USB 3.0 ports are blue.

6 more replies
Relevance 41.41%

I Got A Transcend Jet Flash 300 USB Pen Drive I Was Like So I Get Home Plug It In Start To Put Files On An Error Cannot Copy (My File):Cannot Find The Specified File. Make Sure You Specified The Correct Path And File Name.:confused Can Any One Help Plz
 

Answer:Transcend Jet Flash 300 USB Pen Drive Wont Work

1. What version of Windows are you running?
2. Are you using the Transcend Elite data management software or something else?
3. What is the size of the files?
 

1 more replies
Relevance 41.41%

Are these compatible? The T460 seems to be ignoring the M.2 SSD installed in the WWAN slot. Any BIOS settings to tweak?

More replies
Relevance 41.41%

i bought transcend 250gb external hard disk 9 month ago and it was working properly till this june month but after that it is not working ,the led light is also not blinking . but from few days it comes for 1 minute and then again goes off

Answer:transcend 250gb hard disk led is not blinking

Hi XAXA,From a troubleshooting perspective there's a handful of things to consider. We should start from the ground-up. Let's consider the following:- Is the device receiving electricity? (If you plug something else in that same socket, does it turn on?) <check this one when your hard disk is NOT working>---- If the answer is yes you may have a fault in the electrical wiring to the device.- Does the device have a toggle or similar switch to turn on? If it is fouled you may not be making a good electrical connection. <play with the switch; does it flicker or give you unpredictable results?)---- If the answer is yes you may have a faulty switch (or button, etc.)- Does the device make (excessive) noise when it is turned on?---- If a lot of noise, or a scraping or grinding sound, you have a physical issue with your hard drive. A protectionary measure may be the auto-off feature which you could be seeing.- Is the device plugged into your computer? (We want a good connection)---- If no, you should plug it into the proper port-type (such as a USB?)---- If yes, please ensure you're plugging it into the proper port-type (if not the proper port-type you could be causing an electrical short; check the device's documentation)In any event, if none of the above helps you may do best by checking the owner's manual or searching for one on the Internet (usually available for free in .PDF form.) You could also take it back to where you bought it and have them take a look at it. In ... Read more

3 more replies
Relevance 41.41%

My personal storage hard drive of transcend is not responding in my laptop. When I connect it, it lightens the light but do not respond in the laptop.

Answer:what is the reason for a transcend hard drive to not be reco

To isolate the problem, try it in another comp.

2 more replies
Relevance 41.41%

I bought a brand new transcend disk drive to read a new disk, but once I put it in the disk drive LED light flashes green for a while and then goes out. Nothing is shown on the computer either.

Answer:Brand new Transcend disk drive LED has problems

I assume this is a CD/DVD drive. Does it show up as one of your drives?Does it show up in Device Manager?Have you tried restarting the computer with the drive connected?Always pop back and let us know the outcome - thanks

3 more replies
Relevance 41.41%

Hi,

I have a transcend cl10 sd card. I am using realtek builtin card reader from Thinkpad Edge.

When I first insert the sd card, the read/write speed is 8/12mbyte/s approx. It just about pass the cl10 rating of 10mb/s

However after I leave the sd card after sometime say 1hr, when I try to copy files again, the speed drop to 2-4mb/s.

If I remove and insert the sd card, its speed immediately rise back to above 8mb/s.

Is it possible to solve this problem.

Thanks.
 

More replies
Relevance 41.41%

Hi,

I have a transcend cl10 sd card. I am using realtek builtin card reader from Thinkpad Edge.

When I first insert the sd card, the read/write speed is 8/12mbyte/s approx. It just about pass the cl10 rating of 10mb/s

However after I leave the sd card after sometime say 1hr, when I try to copy files again, the speed drop to 2-4mb/s.

If I remove and insert the sd card, its speed immediately rise back to above 8mb/s.

Is it possible to solve this problem.

Thanks.
 

More replies
Relevance 41.41%

Hi ALLI am facing a problem with my external transcend 1 TB. This is not recognized by my brand new lenevo yoga 720. In the same USB port, i have wierless mouse which connect through USB device. The mouse is beeing recognized. But the external hard drive is getting recognized(one or two times it got recognized though, but most of the time not). The external HDD is recognized in my another laptop. This also proved that external HDD is working properly. Can someone please help me?ThanksSaswata

More replies
Relevance 41.41%

Windows 7 doesn't recognise this usb memory stick,are there any drivers for this device that work with windows 7.

Answer:Need drivers for Transcend JetFlash 2a 512Mb usb memory

  
Quote: Originally Posted by darkwader


Windows 7 doesn't recognise this usb memory stick,are there any drivers for this device that work with windows 7.



Just googled it and you need to pick which one Transcend JetFlash 2a driver - Google Search

Hope this helps

Ken

4 more replies
Relevance 41.41%

Hi all I got win7, win xp, win vista and xp pro all as rars im looking to put them on my usb stick to boot on laptop and pc that not got disk drive can someone please help on how to do this .. am I right in saying I need to un rar to get iso then copy iso to stick or am I far off the mark .. thanks in advance
 

Answer:Wanna put copies of OS on Transcend USB stick for booting

That depends if the ISO is actually contained within the RAR archives. The methods for putting them on a USB stick vary depending on the OS to be used.

You'll find most USB sticks far too small in capacity to run the later OSes though, and given the fact they need drivers for specific hardware as part of the install process on each individual machine its unlikely you'll get them to work reliably, if at all.
 

6 more replies
Relevance 41.41%

I need help fellow members of MT please. Help me fix this.
 

Answer:Transcend flash drive memory shrunk to 590 MB from 29(32) GB. Need some help to fix it.

Try JetFlash Online Recovery

http://www.transcend-info.com/Support/Software-3/
 

12 more replies
Relevance 41%

transcend 1TB external hard drive(StoreJet 25A3) is not getting detected in my computer disk management is showing it is fully empty,but it has all my files in it...
Things I HAVE TRIED:
*Trying on all ports in both my laptops
*troubleshooting
*re-installing driver
I have also attached a screenshot in of device manager below

Answer:transcend 1TB external hard drive is not getting detected in my comput

If the partition you want to open is the one with the hash marks in the screenshot, simply assign a drive letter and that should get you read/write access to it.

6 more replies
Relevance 41%

Hi ,

My Transcend StoreJet 25M3 2.5-inch 1TB Portable External Hard Drive, not working last day. Normally Blue led glow... But now it not glowing. Its not detecting. I checked with Disk management, Device manager . It not showing My HDD. what problem will be there? Cable or HDD ? I have not check the cable. Its USB 3.0 cable . So my friends don't have it. What i do? If HDD problem means how i recover my files? . It not working now. I have warranty. If i give to Transcend Service center. They will recover my files to me... Pls help me anyone.....

Answer:My Transcend StoreJet 25M3 2.5-inch 1TB Portable HDD not working

Try:
- another USB 3 port
- a USB 2 port
- on another PC (doesn't matter if it is USB 2 or 3)
- with another USB cable

4 more replies
Relevance 41%

Can ideaPad S-210 SD Slot use Transcend's JetDrive Lite? Which Model is good Fit ?

More replies
Relevance 41%

Homework question 1. Computer detects the hard disk when connected but cannot send any data to hard disk as it does not show when' send to' is selected

Answer:transcend 250gb hard disk autorun is not working at all

We don't help with homework questions, here. Sorry.... :)

4 more replies
Relevance 41%

my external transcend hard drive is detected but it is asking to format it

Answer:my external transcend hard drive is detected but it is askin

Have you use the harddrive before, have you used it on a mac or is it brand new? If you have not used it before, i should recomend you format it, if it has a file table with FAT32. Choose NTFS, cause then you can store bigger files than 4 GB.

4 more replies
Relevance 41%

Has anyone succeeded to perform a boot from Transcend DOK in Lenovo laptops ? Thank you in advance

Answer:Has anyone succeeded to perform a boot from Transcend DOK in Lenovo laptops ?

it's ok , there is no issue with booting with DOK on lenovo laptops, just the usb boot should be set as the only boot option ( instead the first in the order) .

1 more replies
Relevance 41%

i have transcend external portable storage device . this drive not open. so please give any support tool

Answer:Transcend external portable storage device not accessible

Does it show in "Computer" as a drive and was there any software with it?Always pop back and let us know the outcome - thanks

2 more replies
Relevance 41%

the device is lighting up some time WHEN I GO TO manage - MY computer then lightening off and not detecting in my PC i cant send any file to the storage drive , and i cant fined it in My computer appreciate for the support in advance

Answer:Transcend external storage hard drive not detected in my PC

Have you tried it in another computer to check whether it is a problem with the drive itself?Always pop back and let us know the outcome - thanksmessage edited by Derek

2 more replies
Relevance 41%

Hi i wanted to buy Ram Transcend 4GB DDR3L 1600 LAPTOP RAM for my laptop Hp Pavillion g6 2301ax is DDRL ram supported for My laptop

More replies
Relevance 41%

My Transcend external hard drive has been working perfectly fine until I plugged it into my laptop last night and it did not appear in my computer or seem to be recognised at all. It didn't show up when plugged into my xbox like it usually does, and did not show when I checked on my pc today.  - It still lights up when plugged in though.Any help?Please keep in mind that I'm clueless with computers so the simpler the better please

Answer:Transcend StoreJet Ext. Hard Drive not recognised on any computer

Hi Are you using the cable supplied with the harddrive ? some cables are to long and cause the drive not to get enough voltage to start.Can you hear the drive spinning?If  the above checks OK then open windows disk management and see if there is a Transcend drive shown maybe it has just lost it's drive letter.Here is how to use disk manager in windows 7    http://pcsupport.about.com/od/windows7/ht/disk-management-windows-7.htm

5 more replies