Computer Support Forum

Seagate external harddrive 1.5 T

Question: Seagate external harddrive 1.5 T

Could a USB port be damaged when trying to attach the cable from a 1.5 T external harddrive. this harddrive was attached before I got this computer a few days ago.

Relevance 100%
Preferred Solution: Seagate external harddrive 1.5 T

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Seagate external harddrive 1.5 T

Can't see why it would be?Which having said... if the drive demands more power than the pc - particularly a laptop - can deliver then possibly; but have never come across it.If the drive requires serious power i/p then use an external usb-power adapter to power it?Have you experienced this and this is why you're posting here now?

2 more replies
Relevance 78.72%

I Have A Dell Laptop Inspiron 6000 With 150mb Space Left. I Backup All Files To My Seagate And Transfer My Itunes Folder. I Then Deleted My Itunes From My Laptop For More Space But Not I Have Lost My Itunes. When I Connect My Seagate It Shows My Music But Not In A Way To Connect My Ipod To Transfer The Music And The Seagate Dont Show Up To Give Me More Hard Drive.
 

Answer:300 Seagate External Harddrive

8 more replies
Relevance 77.9%

I have a problem with my Seagate external harddrive. It won't let my computer start. It stops at the BIOS screen and does nothing. I tried pressing the BIOS setup or System recovery but it doesn't work. I found out that my external harddrive was the problem after serveral tries. I took the plug out of my computer and restarted it. It worked fine. I plugged it back in again to the computer and it was detected in Device Manager but not detected on Windows. In Device Manager it said there was no problem at all. However when I clicked computer the external harddrive didn't show up. I also have to mention that I dropped my harddrive accidentally. It keeps making a beeping noise every other second. It was a regular beep, nothing out of the ordinary. I also tried diagnosticing my drive. However that was a problem too. It made another error. I also tried to plug the external harddrive to another computer and it also made the beeping noise and it didn't show up on the otehr computer. I'm starting to think that this is an external error with the parts inside than internal with software and other stuff. I don't think that I like recovering my data with experts because it costs a lot of cash. The ohter option is to replace my drive with another one from seagate. The warranty is still on and won't expire in a while.
 

Answer:Seagate External Harddrive error

9 more replies
Relevance 77.9%

I have a problem with my Seagate external harddrive. It won't let my computer start. It stops at the BIOS screen and does nothing. I tried pressing the BIOS setup or System recovery but it doesn't work. I found out that my external harddrive was the problem after serveral tries. I took the plug out of my computer and restarted it. It worked fine. I plugged it back in again to the computer and it was detected in Device Manager but not detected on Windows. In Device Manager it said there was no problem at all. However when I clicked computer the external harddrive didn't show up. I also have to mention that I dropped my harddrive accidentally. It keeps making a beeping noise every other second. It was a regular beep, nothing out of the ordinary. I also tried diagnosticing my drive. However that was a problem too. It made another error. I also tried to plug the external harddrive to another computer and it also made the beeping noise and it didn't show up on the otehr computer. I'm starting to think that this is an external error with the parts inside than internal with software and other stuff. I don't think that I like recovering my data with experts because it costs a lot of cash. The ohter option is to replace my drive with another one from seagate. The warranty is still on and won't expire in a while. Oh yeah and I just recently discovered that on the other computer I tested the drive on it starts up when I plug it in before I start the computer.

More replies
Relevance 77.08%

As the title says, my new Seagate Expansion Portable Drive is not working in the 3.0 slots in the front of my computer. It only works when i plug it into one of my two 2.0 slots on the back of my computer, which are both occupied by my mouse and keyboard, both of them are not backwards compatible. When my Drive is plugged into a 3.0, absolutely nothing happens. i get a green light on the drive, but it does not show up in my bios or in "My Computer". Works perfectly fine in a 2.0 though.

My motherboard is made by gigabyte, and is only about 2 months old, and my drive is 5 months old.

Answer:External seagate 1tb harddrive not working with 3.0 usb slot.

Did you install the 3.0 drivers and enable it in the BIOS? All versions of USB are backwards compatible.

9 more replies
Relevance 77.08%

So I have a seagate External drive which had been working perfectly fine for me right upto yesterday.
My kids were watching a film via the drive connected to my ps4 and all worked well but when I went to connect it to my netbook to manage some files it was no longer visible.
I've done extensive google searches but not come across anything that would seem to fix my problem.
The drive is visible in drive management but not in disk management. I have tried or in all the uso ports but that makes no difference.
The drive now no longer shows up when I plug it into the ps4 which leafs me to suspect that it's had it and I've lost whatever was on it.
One other thing to note is that when I connect it to my netbook it makes a noise like the drive inside is spinning to try and come to life.
Having said this however it had just decided to show up on my netbook so I am copying the files off of it right now to make sure they're not lost. I'm going to say however that this is going to need replacing right?

More replies
Relevance 77.08%

Hi, and thanks in advance to any help. Today I noticed that my Seagate 250gb harddrive is not showing up under my computer as a disk. This happened after a reboot. It is the only usb device plugged into my computer and my taskbar recognizes it with the safely remove hardware icon. Under. It also shows up in disk management as unallocated with no partition. It has been fussy before but has worked fine for awhile now. Is there anything I can do or have I lost all of my data? Also it was pretty full with just 5% freespace on it before this happened. I know I probably should have backed up this data but now I am nervous because I have important stuff on there. Any help would be greatly appreciated.
 

More replies
Relevance 77.08%

My external hard drive isn't being recognised by the laptop. It is just making beeping noises. Is there anything I can do to get it to work, and if not, who should I send it off to, and how much can I expect it to cost?

Answer:seagate external harddrive doesnt spin up

Could be any of several causes:
Harddrive dead
not enough power (try with laptop plugged into mains - not on battery power)
faulty cable
faulty usb port
Is it making the same noise as in this youtube vid?
read posts on seagate forum

4 more replies
Relevance 77.08%

Problem
- My 500GB Seagate external harddrive can't be recognized in the computer (as if it wasn't there) when plugged via USB
- It makes a repeated beep when connected to a plug
- I called technical support and they charge $300 for data recovery

Question
- If my external harddrive has failed, then what are some methods would Seagate use to recover the data?
- Can't I just open the casing and remove the SATA drive and plug it in with my SATA adapter (i know it voids warranty, but I'd rather have my data back at a cheaper price than to get a replacement harddrive)
- Isn't it possible that the casing might've broke, not the hard drive itself?
- What are your thoughts on this one?

A note from the Customer Service Representative:


Quote:





Originally Posted by csr


Thank you for sending your Seagate E-mail inquiry.

It sounds like your drive has failed. Anytime a drive makes noise such as those, it means the read/write head is bouncing across the data platters.

You may wish to look into Data Recovery or to return the drive to us for an exchange

If you have any additional questions, please let me know.




What does that mean?

Answer:Seagate External harddrive failed, back for $300?

There is the possibility that it could be the encloser that has died.
The only way find out is to purchase another enclosure. However you will void any change at warranty if you pop open seagate's enclosure.

1 more replies
Relevance 76.26%

Anyone use the Seagate Replica software that comes with the 2T External Hardrive? This is the GoFlex Desk series of external harddrives.

The software does an automatic backup of all your computers harddrives and logical drives and backs up any changes periodically to the external hardrive. It is suppose to allow full recovery (it includes a boot disk, linux based for restoring from the backed up 'image').

Anyone use it, and does it successfully restore the 'image' in case of a full crash?

Answer:Seagate Replica (2T External Harddrive) GoFlex Desk

Why bother using third-party disk-imaging (especially from Seagate) when Windows 7 has it built-in?
The built-in one works well, I've used it.

2 more replies
Relevance 76.26%

I recently upgraded to Windows 10 and post that It was working fine without any issues. I have two external drive connected to it.

1. 1 TB Iomega powered drive. - now RAW
2. 2TB seagate external drive.

The 1tb drive suddenly became RAW and I wasn't able to access it. before it happened, I had removed some virus detected in the drive by the AVG antivirus. Post that once or twice it got disconnected and after that the drive became RAW. I understand the file system might have got corrupted since couple of times my system faced powercuts and before I could shut it down the system cut off from electricity as my UPS died on me.

I haven't formatted the disk at all, as I have all my important data in this HD as it was my backup drive for office and personal use.

Disk Management: shows the drive is RAW but a healthy Partition.

I opened the hard drive casing, tried connecting the drive directly to the internal sata cable but the same didn't read even then and still shows as RAW drive. I got a Storite USB to SATA adapter and tried that, the drive is now running fine(as it sounds) with intermittent kind of noise (clicking etc.,) for sometime and then disappears. After directly connecting the drive atleast the below softwares are able to read the data in the drive but unable to recover it.

I have tried recovering data using the below softwares.

1. EaseUS DAta recovery - took too much time to complete reading - 17% in more than 24 hours- stopped it.
2. M3 DAta recover... Read more

Answer:External 1TB harddrive(Iomega - seagate inside) RAW drive

My recommendation is to use [email protected] Recovery Pro. I had a similar situation (raw indication) on a drive a few months back and I tried several of the leading data recovery apps, and the one I recommended is the one that found the most stuff -- nearly everything. It took nearly a whole day to do an in-depth scan, but in the end, it was worth it. It's free to install and try out, but you need to buy a license to do any serious recovery work.

1 more replies
Relevance 76.26%

I have taken delivery of a Seagate FreeAgent pro 750.I have created a backup plan and put my pictures in to it.Every time I modify a file (JPG/.doc & .psd are the ones I have tried so far) it refuses to back it up and the log shows error 8. In fact I just downloaded some jpegs from my camera and they havbe been rejected as well.I cannot find the solution and there are limited help files.Can anyone help please?

Answer:Seagate external harddrive rejects amended files.

Autobackup.Maybe someone has used or is using this.I need to sort this out because the drive is useless to me if I cannot add extra files to the plan.It is meant to monitor changes and automatically write them to the drive.I think I might be missing something obvious but the manual/help is not very helpful.Please somebody point me in the right direction.

9 more replies
Relevance 76.26%

I have Windows 7 Home premium 64bit as I recently got a new computer, and to my surprise my seagate external Harddisk did not work. If I go to the Devices section, it is listed as Desktop. I have tried many things such as, rebooting, trying different USB, Assigning A letter to the Expansion and a few others as you will see in my screenshots. Just before I forget my old PC 32bit Windows 7 Ultimate, automatically detected my 500gb Seagate 500gb External Harddisk so I cannot see a problem with the Harddrive or with my computer as it is brand new and fully functioning. Below are my screenshots.







As you can see from these images non of the fixes on the fourm, or on seagate work. If you have any fix please reply to this post as soon as you can, or on the other hand any questions. I will be very grateful.

Sorry about the thumbnail, Not sure what happened there.

Answer:Seagate 500gb External Harddrive, Windows 7 Will Not Read?

Cheers m8
SATA or PATA????

Have you tried to remove it from the ext case and installed it into the computer...to check if any of the electronics in the external case failed.
could be something with the usb drivers in the new machine... might try unstalling from the device manager the usb controllers, maybe the composite device then turn the machine off and let windows reinstall 'em again and see if the drive is picked up.
At this point I'd be asking just how important is the data on this HD... I'd even go so far as see if I could put the HD into a friends machine,(or old 'puter), to see if it could be picked up???? Be sure and copy the data off the HD while you continue to trouble shoot the drive.
From experience..... the only drive I've not been able to finally detect ended up as a dead drive, "bfh"
luk to you.....

3 more replies
Relevance 75.44%

I have just purchased the Lenovo IdeaCentre 510 Tower PC [i7]. It came with Windows 10 Home OS. Within the set up, it asked me whether I wanted to install updates to Windows 10 - i said 'yes'. It took a good couple of hours to complete the whole set up of the desktop, but according to the log, all Windows updates appear to have been successfully installed. (I mention this because I later found something on Lenovo's website about updating to Windows 10 when setting up your Lenovo for the first time - it mentioned trouble which may include the damaging or disabling of hardware? I can't seem to find this again, or else i would post a link. I think this may have been referring to upgrades to earlier windows versions rather than upgrades for Windows 10 applied to a machine which is sold with Windows 10 already installed.) My desktop seems to be up and running but I have just attempted to connect my Seagate Backup Plus portable drive using the USB port and it will not recognise it (I tried this on several ports).  I can feel the Seagate working but it does not show up under My Computer or anywhere else I can see.  I have tested the USB port by inserting a regular USB pen drive and it DOES recognise this. The Seagate previously worked on my Windows Surface Pro 3 with no trouble and I have all of my files backed up on it.  Hope somebody can help me figure out what is going wrong...  Many thanks!

More replies
Relevance 67.24%

I have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...

Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?

Answer:Seagate Harddrive test tool fail but harddrive data seems intact

Run the most thorough and extensive test available with the WD hard drive utilities.

If it fails the thorough test, you may have a warranty claim.

Or the Seagate tool. Whatever you have. Your title is confusing.

3 more replies
Relevance 59.04%

Hi, I have a 500gb, harddrive wich doesn't start, it worked perfectly before, and now just suddenly it wont start at all. I'm not angry about it yet becuase I still have hope this can get fixed.

I pop the adapter in, nothing happens, plug the stuff to the computer, nothing happens. I got no clue what to do really. IF it can destroy the adapter if I put a ac adapter for a portable computer inte it while it was off, that can be it. OR if it got broken by safely lying in my bag. Just tell me how I can fix this, Please. I'm So thankful for anyone who can help me with this.

Seagate FreeAgent 500GB USB2.
 

More replies
Relevance 59.04%
Question: Seagate Harddrive

Bought this 60 gig hd second hand and after detecting drives on boot screen i get the message that the NTLR is missing ,press cont/alt/delete to restart but then it just does the same again.Anyone know what this means.Also brother has keyboard which will not bring up the @ sign when shift or control is held down. Any help on either welcome.Cheers.

Answer:Seagate Harddrive

click here click here

2 more replies
Relevance 59.04%

I'm considering a new harddrive, but until I ran across an attractive offer for the 1.5TB, I had been thinking of the 1TB instead. The larger drive has the following specs:

Formatted Capacity : 1.5TB
Interface Type: Serial ATA-300
Buffer Size: 32MB
Spindle Speed: (RPM) 5900 RPM
Average Latency: 4.16 ms
Data Transfer Rate: Buffer to Host Up to 300MBps
Sustained Throughput: Up to 115MBps
Ports and Connectors: 7-pin Serial ATA Connector
Manufacturer Warranty: 5 Year Limited Warranty

The thing that stands out in my eye is that the spindle speed is slow compared to the 1TB, which is 7200 RPM, but I think the warranty is a bit longer.

I recall recently reading an article posted in the forums news board that said that the 1 TB was the fastest drive in it's class, but the sustained throughput of this drive is slightly faster...I think.

The extra 500GBs would definitely be a plus, but would it really perform as well as the 1TB? Is there any other aspect to consider?

Answer:Seagate 1.5TB Harddrive

that...is an odd RPM value for a HD

9 more replies
Relevance 58.22%

I was on newegg and found a nice seagate harddrive for 149.00 for a 400gb harddrive. My wife loves frys and told me to check out www.outpost.com and i found a maxtor 500 gb for 129.00 and these are the specs it has!


Serial ATA/300
7200RPM
16MB Buffer
8.5ms Seek Time


i know ppl love the raptors and im hoping this is an okay cuz i always bought a seagate with every harddrive ive ever bought.

Do u think this is a good hard drive brand?

wait i think raptors r from WD :\
 

More replies
Relevance 58.22%

Hi guys,

I'm really in desperate need of help right now. My harddrive just died and all my essays and school stuff are in it and the due dates are within days.

So I turned on my pc this afternoon,did some stuff and turned it off,then i wanted to turn it on again but the harddrive is no longer detected by BIOS.The bios gives the typical message of no harddrive detected,plz insert boot media and press a key blah blah blah.i also noticed that the whole start up becomes incredibly slow,even for loading the bios setup. I bought this new pc during xmas and its just been a lil bit over 3 months.

seagate barracuda 7200.11 500Gbytes
motherboard is Asus P5QL Pro
4gig mem.
geforce 9800gt
intel 2.5Ghz

the machine's been perfectly normal for 3 months except very occassional blue screens,and now the hd is not dectected all of a sudden.

i did not install anything or remove anything in hardware/software,i tried a different sata cable for dvd-rw which is recognized by bios,plugging into a different sata plug on the motherboard,and nothing happens.

when i start the machine i can hear that there's a couple clicks in the harddrive,so obviously its still running,but after that its all silence and there's no activity at all thereafter.

does this indicate a dead harddrive that can only be replaced?is there any chance i can recover the data on the harddrive?


thx tons for any reply!!!

Answer:seagate harddrive problem

This happened like a day ago for me with the same drive. I fixed it by resetting the cmos, it was either that or the cable was loose (because i took it out and put it back in) so check the cables, if that does not do it, try a cmos flash.

EDIT: wait, the cmos flash fixed my 1tb drive, not the 7200.11, my bad.

9 more replies
Relevance 58.22%

I noticed on these two drives they have a jumper pin on them
with jumper pin 1.5 g/sec
without jumper pin 3.0 g/sec

If my motherboard is compatible with the 3.0 g/sec transfer rate
can I pull the jumper out, or do the drives only operate at that speed in a raid configuration or is it even worth the hassle ?
 

Answer:Seagate 500 & 750 gig Harddrive queston

THat jumper is so that the faster Sata 2 (300Gb/s) drives will work on the older Sata (150Gb/s) sata controllers. If your controllers are Sata 2 then yo can remove the jumper and not worry about it.
 

2 more replies
Relevance 58.22%

I have a seagate barracuda 500GB harddrive that I'm using as a secondary harddrive. My main boot drive with my os is a 150GB raptor. this drive works find, however I cannot detect my seagate. When I go into the BIOS, it looks like its detected there, but when I log into windows I can't see it. Thanks in advance for the help
 

Answer:problems with my seagate harddrive

7 more replies
Relevance 58.22%

A while back I bought a Seagate 1TB harddrive, but until recently it was just stored away and not used.
Recently I wanted to expand a XP system I have containing a M4A79XTD Evo mboard, so I just popped in the 1TB. But, to my surprise, the harddrive showed up as only 32MB. So I went into Ubuntu(dualboot with XP) and format the drive, then restart. Back in XP it finally showed up as 939GB. Then I turned off the computer. When I turned it back on later, the drive was back at showing 32MB.

The only thing that worked was when I used ext2 on Ubuntu to format the drive. I wanted to do a clean OS install on the 1TB, but no OS under the sun wants to install, because it jumps back to showing 32MB. I can only store files with Ubuntu under ext2.

I've tried the drive in other computers, with various cables, external enclosures, etc.

So now my question is, do I have a nice looking paperweight, or do I miss something important?

PS: Seagate ST31000528AS
 

Answer:Problem with Seagate 1TB harddrive

8 more replies
Relevance 57.81%

i have three hard drives connected in my system, my seagate is basically where i store my audio, and video files, whenever i access a file or play a file i've recently noticed the harddrive is making alot of noise. is this normal , my other drive dont make any noise ?

Answer:My 120 gb seagate serial sata harddrive

That's not normal. Sounds like its dying.

7 more replies
Relevance 57.81%

Good Morning Sirs
We got a Seagate USB Harddrive , which is not getting recognised as File System is RAW
Kindly advice how to fix this issue so that harddrive gets recognised in Desktop/Laptop with Windowsxp/Windows 7
Regards

Answer:Seagate USB Harddrive - File System RAW

Thanks a lot
I need to find out an Indian dealer so that the software can be bought because now we r only able to see the data and can not recover in trial version
Thanks again

2 more replies
Relevance 57.81%

A couple weeks ago my USB External harddrive got unplugged and when i plugged it back in, it asked me to Format it. It game me a "2HC015KJ" Error code. Its 500GB but now appears as 2000GB. Ive tried to use Partiton Wizard 7, but when doing a quick scan for a couple days, it was only at 163608 sectors, and still at 0%.

More replies
Relevance 57.81%

I have the following model Seagate Hardrive and was wondering if anyone knew of reliable resources to get a new circuit board for this item. I have been checking ebay, online sites, ect...so any additional assistane woul dbe helpful.
Model ST340823A
U Series 5
IDE drive
Seagate 40 GB
Firmware 3.07
I have seen a lot of models that are close - just not exact match. I'd toss the drive, but there is about a years worth of photos on there that I unfortunately did not have a backup for.

Thanks in advance
 

Answer:Seagate Harddrive PC Board Replacement

Could you explain what is wrong with the drive?
 

4 more replies
Relevance 56.99%

I bought a new Seagate 250GB EIDE HD 7200/8MB/ATA-100 and would like to replace my old drive with it in my Dell? Dimension? 4400 (Pent 4 1.80GHz, 768mb Ram, running Windows XP Home). I need some advice on how I should format this new drive and then clone and replace my old drive with the new Seagate drive using Norton Ghost 2003.

What is best way to format the harddrive to get it ready to clone - using (Control panel > Administrative tools > Computer management > Disk Management) or formating it via Windows XP CD or is there a better way/easier??? Thanks.
 

Answer:Formating and cloning to a new Seagate 250gb harddrive

You can use Seagates Disk Wizzard ( IMO the easiest & free)\
http://www.seagate.com/support/disc/drivers/discwiz.html
How to use Disk Wizzard
http://www.seagate.com/support/kb/disc/howto/use_dw2002.html
 

3 more replies
Relevance 56.99%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 2
RAM: 1022 Mb
Graphics Card: RADEON X300 SE 128MB HyperMemory, 128 Mb
Hard Drives: C: Total - 71468 MB, Free - 24974 MB;
Motherboard: Dell Inc., 0YC523
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled

Before I purchase an SATA Interface Cable and power adaptor cable, is this project doable ? and will there be a SATA host adaptor when I open my PC up ?
 

Answer:adding Seagate SATA harddrive 1TB 32MB

Open it up and check. I doubt it on a computer that old.
 

1 more replies
Relevance 55.76%

Im replacing my harddrive and these two seem to be the best so far

http://www.amazon.com/Western-Digit...SDGU/ref=sr_1_1?ie=UTF8&qid=1296428337&sr=8-1

http://www.amazon.com/Seagate-Momen...f=sr_1_60?s=pc&ie=UTF8&qid=1296428609&sr=1-60

Also Im looking at the 500gb hardrives if there is another better one you guys can prefer
 

Answer:What is a better harddrive Seagate Momentus or Western Digital Scorpio Blue?

If I can ask, why are you choosing between low performance 5400rpm hard drives when you could have a higher performing 7200rpm hard drive. Just curious.
 

5 more replies
Relevance 53.71%

I currently have a laptop that is a few years old, anyhow I am building my own computer with a friend of mine. I have a external 120 gig Western Digital External Harddrive hooked up to my laptop now. (The external harddrive is brand new) I need a harddrive for the new computer I am building and was wondering would it work if i opened up the external harddrive casing and removed it from there and installed it in my computer i am building. Whats your thoughts on the change in power supply and could it work and what?

Pat

Answer:External Harddrive into Interal Harddrive

if you are building a laptop... no. it is built completely differently.
with a desktop computer you would not be able to either because the connection inside its casing is different. its better to keep your external the way it is and get an internal. you could then use your external as a backup.

7 more replies
Relevance 53.71%

Hello,

My desktop computer's motherboard was fried in a tragic lightning accident, but the hard drive is intact. I would like to purchase an enclosure for the hard drive and use it as an external hard drive. I'm posting here because I'm worried about compatibility.

Here are the hard drive details:
Seagate, S/N 90Z7588X
ST 380215A
P/N 9CY011-305
Firmware 3.AAD
Date code 08257
Barracude 7200.10
80 Gbytes

Will that work with any of these enclosures:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817158012
http://www.newegg.com/Product/Product.aspx?Item=N82E16817173047
http://www.circuitcity.com/ssm/Acom...sem/rpsm/oid/206486/rpem/ccd/productDetail.do

Thank you in advance for any help!
 

Answer:External Harddrive from Old Computer Harddrive

Any 3.5" IDE compatible drive enclosure will do the trick. I use a ThermalTake enclosure myself (same as MadDog and CompUSAs no-name brand).

Courtney
 

2 more replies
Relevance 53.71%

I realize one is just an enclosure and you provide the harddrive, and one is a true harddrive, but which is better and whats really the difference?
 

Answer:usb harddrive enclosure -vs- usb external harddrive

11 more replies
Relevance 52.07%

Well this isn't so much of a problem as just a heads up, or umm, me *****ing. If you ever buy a Seagate External Drive, at least the new ones that are square and ugly, don't ever hope to take it apart! I had to take one apart for a customer today that blew her circuitry and needed the data and these things are just not meant to be played with. The cover is a plastic nightmare to take off, which will definately result in broken tabs and then they use tamper proof screws to keep you from getting any further. Had to drill the screws to get at it. I can understand the desire to keep poeple out of the product to make RMA's better for the company but, well I dont like it. So in the event that you were thinking of buying a pre-assembled external drive (bad idea anyway) with thoughts of maybe one day putting the drive into your computer, don't buy a Seagate!

Oh and don't plug your laptop power supply with 19 volts into an external hard drive meant to handle 12 volts either. Who would have thought that would be a bad idea??
People...

Answer:Seagate External 160's

lmao, i had the same problem about 2 weeks ago. There are some stupid people out there. A guy plugged in his laptop power supply directly into the external, fried the circuitry, and brought it to me with the laptop power suplly still attached. What a moron!

2 more replies
Relevance 52.07%
Question: Seagate external

Why does my seagate 3tb external not show up for a long while and then get message saying "you need to format the disk in drive F: before you can use it", and sometimes very rarely i can access the external and copy files at a very slow speed

The drive shows under disk drives but disk management does not load up.

Answer:Seagate external

Your Seagate 3 TB external drive is a GPT drive.

I shall straight away get into Data Recovery mode using Test Disk. You must have an empty formatted drive of adequate capacity connected to copy all data into it. If that drive does not have sufficient capacity then you have to select only the important files and copy those to it when we come to that ( and if we come to it . Yep, Data Recovery is a dirty job with results unpredictable,except in most simple cases.)

Read Part 1 and Part 2 of my guide here Regain a lost drive using Test Disk - An Illustrated Guide

Download TestDisk Windows version 6.14 TestDisk Download - CGSecurity , extract it to your C drive. Right click on testdisk.exe in Testdisk-6.14 folder and run as administrator.

Ready to go?

First screen - No Log [ENTER]

Second Screen: You must be seeing three drives. Your system drive , your faulty drive and your destination drive to copy from your faulty drive.
( As a matter of fact you can go upto this stage without a destination drive connected just to make sure that your faulty drive is visible to TestDisk. If it is visible then close TestDisk by clicking on X on top right corner, connect your destination drive and start TestDisk all over again.)

Select your faulty drive , Proceed [ENTER]

Third Screen :Here you will select [EFI GPT] [ENTER]

Fourth Screen: Analyse [ENTER]

Fifth Screen: 1. If TestDisk is able to find the valid Partition Table, the partition/s will be indicated followed by the mess... Read more

9 more replies
Relevance 52.07%

A few days ago I tried transferring data from one of my external drives to another. Everything went fine at first but I noticed that the transfer rate was varying wildly and would sometimes come to a halt for awhile and then resume. When I tried transferring more files the behavior continued except that it now stops and the drive 'disappears' (is no longer recognized) by my computer. The external drive's blue light continues to blink although the file transfer stops. If I unplug the drive and wait a few minutes I am able to reconnect and the drive is recognized again but it repeats the behavior after a minute or so. The drive doesn't make any strange noises but seems to slow down prior to stopping. I'm trying to get as many of my files off of it before it stops working completely. Is there a fix out there?

More replies
Relevance 52.07%

How can I see what i have backed up? How can I delete some of the backups? Sorry, but i don't understand the manual. Any good info sources out there? thanks
 

More replies
Relevance 52.07%

Hi, Ive been having problems with my external hd, whenever I try to put files on it i get an i/o error, how do i fix this?
 

Answer:Seagate external H-D

16 more replies
Relevance 51.66%

Hi,

New here - hello! So, i have taken the plunge and fully opened up my Seagate Barracuda 2TB External HD. It is making some strange noises and i was curious as to what was going on inside.

I have made a video of power up with the case fully off:

As you can see the arm goes across, but then the spindle appears to lose power completely and i am left with a blue flashing light and a drive which isn't read by my PC.

I would be so grateful if someone could shed some light on what i'm sure is a fairly common problem, particularly with Seagate drives it seems!
Many many thanks in advance!
 

More replies
Relevance 51.66%

I saved all my documents, music and photos from the school laptop (Mac) and now I need to use them on my home PC. The problem is when I connect my Seagate to the PC, I'm not getting the drive icon to select the things from the Seagate. What should I do?
 

Answer:Seagate external drive: from Mac to PC

Check Disk Management and see if the drive is visible. You may just need to assign a drive letter to it.
 

2 more replies
Relevance 51.66%

Hi all

I have recently purchased a 2nd hand 750Gb External Hard drive.

I scanned it and rand file restore software to make sure it was totally clean. Then I formatted it too (you cant be too safe). Anyway, it worked long enough for me to put all of my family photos on and music, films work and other photos.

However now it has stopped working. When I plug it in it crashes the computer, and it does the same to the boot up whenever I plug it in. I have tried to use the safe remove hardware, and this is where it gets confusing.

The computer is recognising it in Device manager and the safe removal, but it wont let me safe remove (crashes) and it also wont let me populate the volume to see if that works (crashes again). Sending it off to be fixed isn't an option (my girlfriend would kill me......the photos you see......).

Is there anything I can try, I'm rapidly loosing hair at pulling it out.

Cheers Guys

This forum is great

Steve
 

Answer:Seagate FreeAgent External HDD

10 more replies
Relevance 51.66%

Free Agent 500 GB.
Purchased in May 2008.

Used to image C Drive.

The Drive was containing many images and so I did delete some of them. Some of those deletes told me that the file was too big for the recycle bin but I clicked yes anyway.

Now I did a defrag of the drive yesterday (8 hours!). Also found out that there seems to be a lot more space used than what I have in total amount (GB) in images. Perhaps I ruined the drive? Were these deleted images not really deleted?

What can I do

Total Free space: 465 GB (new)
Total used space 241

But there are only about a total of 117 GB worth of images I made. So there is a big difference. I have the feeling that the ones deleted are still on that external drive somewhere yet I can't see them.

What are your suggestions please? Have no clue what if any solution can be found for this, other than throwing that external drive in the garbage even though it still works fine.

I'm a complete noob in this so please be gentle and precise. TIA!

PS: I used EaseUS Todo Backup version 2.5
 

Answer:Seagate External HD questions

Does this drive have its own recycle bin? That's what happens on my NAS drive and I have to clear its bin if I want the space back.
 

40 more replies
Relevance 51.66%

Just Seagate 320Gb external hard drive. Laptop won't recognise it. Any ideas?
 

Answer:Seagate 320Gb external HD

Plug it in

Welcome to MG!

Some more info might help

Is this a new HDD?
Have your tryed it on a desktop?
How is it connected?
Mabe Bios setting to enable USB or?
 

4 more replies
Relevance 51.66%

i had a 300 GB Seagate external HDD which was working fine until now.. have lots of important data on it.. was transferrin some files to a friend's pc today and worked totally fine... once it was done disconnected it using the safely remove hardware option and turned it off... then had to connect again to transfer some data but the hard disk never came on.. a removable disk was detected in xp but when i double clicked it got the error I/O device error... tried all sort of stuff with it.. removed the casing and again tried it using the usb connector alone.. the power cable is fine.. and the hard disk dint turn on.. earlier whenever power was given it used to have d normal hdd vibration and sounds.. now absolutely nothing.. except a small continuous ticking like from a clock.. tats it.. pls tel me wat the issue could be .. is the hdd dead or is it a problem with the external interfacing... i tried connecting it to 3 pcs wit same result.. pls help
 

Answer:problem with external seagate hdd

It may be the case or the drive. You'll need to connect the drive to a PC internally to test it and see if it works. You may need an adapter.
 

1 more replies
Relevance 51.66%

I recently purchased a Seagate 1 TB External Hard Drive to use in conjuction with my Acronis True Image 9 backup software. When I open the latter I get the following warning:"Some partitions contain errors and can be imaged only sector-by-sector. It is recommended that you exit Acronis True Image Home and check the partions with your system's disk-checking tools. Are you sure you want to continue imaging?"I have used the Windows Error Checking utility and it has eliminated the warning and I have now managed to backup my C drive but I am still concerned with the warning I received as up to the point that I received the warning I had not used the drive. In addition the drive makes a clicking noise and I now see that quite a few Amazon buyers of the same drive have reported faults, including the clicking noise. Should I be concerned?

Answer:Seagate External Drive (1 TB)

Wot no suggestions? Whereas at one time I seemed to get responses to my problems I rarely do now.

3 more replies
Relevance 51.66%

Its possible this discussion has already made headlines in the forum, but I can't find an exact replica of my issue.

I purchased a Seagate 1Tb External HD (SRD00F2) about a year ago and it was working fine on my Windows 7 desktop PC. I had not used it in a good 6 months and tried to access it this weekend. However, nothing happened at all. I tried the following

- Use a multi-meter to check the 12V from the power supply. That was fine.
- Cleaned the connection contacts on mains and cable.
- Re-Booted the PC with the drive plugged in, still not good.
- Connected to another Windows 7 desktop PC, nothing again.

It does nothing at all, no detection of any kind (I know some people can see the drive, but it does not mount).

I have run out of ideas. Should I be seeing a power light appear on the Seagate drive itself? I can't remember?

I have a lot of data on the drive (family photos) and really need to access all the info without loss.

Hoping for genius enlightenment
Andyrivets

Answer:Seagate external HD not detected

Hi and Welcome to TSF!

Does the BIOS and/or Disk Management see the disk at all?

Where did the drive sit for the last six months?

How did you go about cleaning the contacts?

4 more replies
Relevance 51.66%

We have a Seagate 9SEAN3-500E that connects to the computer but wont open when we click on the drive. We can see it connects but nothing opens. Also when we plug it in, the computer freezes. How can we fix this please?
 

Answer:Seagate external HDD does not open

Is it a new drive? Also if it is a older drive have you tried another computer?
 

6 more replies
Relevance 51.66%

Every since I updated to Windows 8.1 my seagate external hdd has been randomly turning off and coming back on when I start to use it or open a program again, do you know what this could be maybe? Thanks.

Answer:Seagate external hdd problem

People have been reporting this sort of issue since upgrading a lot.

The only things you can try is making sure your power options don't have 'turn hard drive off' set to anything but 'never' and that the system properties for the drive don't allow it to be powered down , other than that there doesn't seem to be anything that helps.

Many people have checked these options and their external drives STILL power down after a period of non-use.

16 more replies
Relevance 51.66%

My new computer has OP Vista, it will not read the files on he external drive, photos, docs. etc.However if I use it in my old computer it reads OK. Can you advise me if it is Vista problem or the computer problem ? Thank you.

Answer:Seagate external drive

"....it will not read the files on he external drive"Won't read in what way? - You can't see them, or they won't open when you double-click them?

3 more replies
Relevance 51.66%

Yesterday my Seagate 250 GB FreeAgent HDD was working fine. This morning I started to play music from a file in the HDD and it was all glitchy... like a scratched CD. This evening I plugged the drive into my usb port and nothing. My computer doesnt recognise it, I tried to find it in device manager and nothing. The light comes on the driver when i plug it into the usb but the computer doesnt make that "dun der" sound when I plug it in. I did the latest vista update and everything but to no avail. The usb port is working cos the computer recognises my ipod and camera fine. I am running a Toshiba Satelite A135 with Vista. Help please
 

Answer:Seagate External HDD Problems

had anything happened to the hdd inbetween this time? did you drop it or shake it?
 

1 more replies
Relevance 51.66%

I have a 200 gig seagate external drive. I've been using it for about 2 years without any issues. Yesterday a friend of mine asked me to upload some songs onto his Zen micro, so I upgraded to media player 10 and uploaded the songs. Ever since then windows no longer sees the drive. I've followed the "trouble shooting" guide on seagates site to no effect. I even went and re-inistialized (my computer was due anyways) and it still doesn't show up. I got an error once or twice saying that the hardware had errors or something like that, not the usuall install thing when it doesn't have the drivers. I've gone through device manager and it doesn't show up, nor does it show up under the disk manager as a partitioned drive or an unpartitioned. If I plug it into my laptop it works just fine. I've tried every port on my PC and the same thing happens. But things like thumb drives, printers, and even my Ipod work just fine. It will even show up when I reboot and I get the drive postings in the bios of my PC. I'm running windows XP pro service pack 2. I've also tried booting in safe mode to see if device manager will find it there. No luck. The only thing I can find is under USB devices there is an unknown device that shows up as an installed item. If I uninstall it and scan for changes it automatically re-installs. I beleive this is the USB mass storage device item that they say will show up under there, but since I don't have a w... Read more

Answer:Seagate external HD issue

12 more replies
Relevance 51.66%

1.0 2GHJ7ECG ST310005EXA101 Seagate Desktop External Drive 1000GB

In summer 2008 I bought the above drive (from Best But I think)

Last month the drive started going out - the green light would go off and it would no longer be recognized by my laptop. To reinterate, this problem only started a month or so...

I have not changed anything in my configuration..

I have tried the USB drive in a different port and have the same problem.. besides the power on the drive goes out so I don?t think it?s a USB issue.

I chatted with a Seagate tech today who told me I needed to go to radio shack and have something done with the AC adapter but I didn?t buy it there. Also Seagate rep told me to try another PC but I don?t have one..

I am concerned that I spent good hard earned money on this drive and its lasting only a year and that I might lose my data..
 

Answer:External USB Seagate Drive

Good possibility it has failed, does it work at all now?

Or does it just fail at the first hurdle?
 

4 more replies
Relevance 51.66%

Hi guys,

I am trying to move a file that is about 29 gigs on to an external HD that has about 90 gig worth of free space; however, it says there isnt enough room on the hd to move the file.

Why?
 

Answer:Seagate external HD problem

8 more replies
Relevance 51.66%

I just bought an external Seagate FreeAgent GoFlex 1 TB External HDD and when I plug it into the USB 3.0 on my motherboard, it recognizes the device and the autoplay comes up. However, after about 2 seconds it disconnects and I cannot see the device. When I plug into any other USB 2.0 port, it works just fine but when I plug into my USB 3.0 port, it doesn't stay connected. I am not a newbie and I am not missing anything here. I have all the proper drivers, updated, etc. I have checked the cable but I do not have any more USB 3.0 devices to troubleshoot it with. Please help if I am missing anything here...

VVV Click the "My System Specs" link that this forum provides to see what I am working with.

Answer:Seagate 1 TB External HDD Trouble

Don't know if this will help or not but not too long ago I bought a 1TB freeagent goflex usb 2.0 with an extra esata cable. When using the esata cable I'd get a momentary autoplay dialog box and then nothing. The usb 2.0 cable worked fine. I contacted Seagate customer support, explained the problem, and they over-nighted me a new esata cable. Seems they had a run of defective cables where it attaches to the drive itself.

2 more replies
Relevance 51.66%

Hello. I can't decide on an external hard drive to buy. I have a MacBook Pro.

I would like a firewire/usb drive. I'm thinking

http://www.seagate.com/ww/v/index.j...ale=en-US&reqPage=Model&modelReqTab=TechSpecs

or

http://www.lacie.com/us/products/product.htm?pid=11062

(both 750GB drives. same price)

they're both firewire 400 not 800. I feel like that's not that big of a deal. i'll run some software off of the external hd,

your suggestions will be greatly appreciated.

thanks
 

More replies
Relevance 51.66%

My External HD won't show up in My Computer anymore.

It does not show in device manager or disk manager to even assign a letter path to it

I've Tried these steps and still no luck
- restarting computer
- refreshing content of my computer
- un plug and re plug
- device manager settings
- disk manager settings

in my device manager i see this under Disk Drives:
ST3320620AS ATA Device (working properly)

Disk manager errors -

Base System Device PCI\VEN_1180&DEV_0592&SUBSYS_028A1028&REV_12\4&B4D00C5&0&32F0 The drivers for this device are not installed.
PCI Simple Communications Controller PCI\VEN_8086&DEV_2E24&SUBSYS_028A1028&REV_03\3&11583659&0&18 The drivers for this device are not installed.

Don't think either of these are it.
Can it just be dead? the green lights show its on and i believe is working
 

Answer:External Seagate HD won't be recognized

The green lights don't mean anything more than 5 volts is being supplied to the drive, but the drive can still be bad or corrupted... You must back up important data to non-volatile media like CD, DVD or Blu-Ray discs, and not rely on mechanical devices like hard disk drives or even solid state media
 

1 more replies
Relevance 51.66%

Now this hardrive is good and holds 160 GB, and i had it for atleast a year. Today my computer had froze on me, and gave me some sort of error. I reboot my computer and found that my seagate wasn't detected by my computer. I tried replugging everything in and rebooting my computer. Now it makes this strange buzz / hum noise constantly and i hope its not broken. Any advice is welcome.
 

Answer:Seagate External hardrive.

16 more replies
Relevance 51.25%

My External HD has failed and I suspect the output point to the USB . How do I get the lid off the HD to see if there is a broken connection? , I can't see any catches or screws . Do I just force it off ??
 

Answer:Solved: Dismantling Seagate External DH

Which exact Seagate external drive do you have? Each model or series is a bit different. There should be a label or model number on it.
 

3 more replies
Relevance 51.25%

I use a 1 TB Seagate drive for my backups and it has been clicking lately.  Less than a year old but I do a full system backup once a week which is 320 GB.  The backup failed Fri or better said, I unplugged it due to the somewhat noisy clicks after running too many hours.  Having been around computers for a while I am pretty sure this can't be good! Thoughts?

Answer:Seagate external drive clicking

Drives can fail at any time. Most fail after a longer time than less than 1 year, but there is no guarantee (there is a Seagate warranty). You have two symptoms suggestive of drive failure: an unusual noise (clicking), and a failed backup. You could consult the help at Seagate.com,  for example:Identifying and troubleshooting hard drive noise issueshttp://knowledge.seagate.com/articles/en_US/FAQ/174571en?language=en_USAlso find your drive on this page and navigate to the appropriate diagnostic tool download:http://knowledge.seagate.com/services-software/apps

7 more replies
Relevance 51.25%

I've read several threads regarding this problem but haven't found the solution. I am trying to open the case of my Seagate Desktop External Hard Drive because the USB connector port (that connects the cable from the computer to the external hard drive) came loose from inside the casing of the external hard drive. I am hoping it is a simple fix where I can just open the case and reconnect the USB port from whatever it came loose from. It is the 500GB with P/N: 9NK2AL-510.
 

Answer:Seagate External Hardrive-Broken USB

13 more replies
Relevance 51.25%

I have an Asus eee 4gb surf I am just getting to know. It runs Linux. I bought a 60gb 2.0 Seagate portable drive that I wish to connect to it. I checked the drive on my Vaio with XP, and it seems to be fine. The eee doesn't detect it, and doesn't have all sorts of nice places for me to go to find new hardware etc- I assume that I need to download a driver- however Seagate doesn't appear to support Linux. Users on the Linux and eee forums I checked previously seem to be happily running their seagates. I tried doing a search and just don't have the heart or time to plow through thousands of web pages trying to find an answer- anyone here know? I would sure prefer not to have to load XP on the eee (god, that almost SINGS, doesn't it?) Looking forward to learning this from you all!
Thanks! kat:confused
 

Answer:Run Seagate external drive with eee Linux?

Cancel this ladies and gents- it's become a totally different problem- the drive I bought, on Ebay is a Momentus internal drive mounted by the third party vendor in an external case- I spoke w/Seagate, took the drive out- there is no life. Seagate is not surprised, and I'm sure you won't be either- definitely a DOA. So, the upshot is, I tried for a quick fix, when if I had just waited for payday, for 30 dollars more, I could have bought (and will buy) the portable drive, at MUCH HIGHER GB that is made to do the job- marry in haste, repent at leisure.
 

2 more replies
Relevance 51.25%

Hello,

I have 2 Seagate Free Agent external hard drives that I use for backup.
One is that older brown case type, that stands vertically.
The other is a newer style; silver case, lighted logo, and lays flat.

I am running Windows 7, the 64 bit version.

I now have these hard drives plugged in continuously as it is a pain to plug them in and out. They are used for backing up and storage very infrequently, so they just grind away all the time for really no good reason.

No sleep or hibernate software came with the units, but I did see the following on the Seagate site:

FreeAgent Classic Desktop Software
File Version: FreeAgent-DT-WW.zip

Apparently this download provides the sleep function that I would like.

Question: it says for 32 bit systems ONLY.

But, I am running a 64 bit OS, although I imagine nearly all my applications
are 32 bit. How does this work; is the OS smart enough to know that the Seagate application is 32 bit only, or does Seagate truly mean that you have to have an (only) 32 bit OS ? Think it'll work ?

Anyone happen to know of any other software available to provide a sleep or hibernate type function for external HD's ?

Thanks,
Bob

Answer:Seagate External HD Software & 64 Bits ?

FreeAgent | Go, FreeAgent | Desk, FreeAgent | XTreme | Seagate

there is seagate's very own solution

1 more replies
Relevance 51.25%

I bought a Seagate 320 gig external hard drive about 5 days ago to back up my files on my laptop as I had to reformat my internal harddrive.

Everything was going great. I was in the middle of restoring my files onto my laptop when the external hard drive tipped over because a accidentally snagged the cord. I immediately received an error message that the data transfer was interrupted and no device could be found. I could no longer navigate to the external.

I did a reboot and it would not recognize the external hd. It makes a whirring sound and a couple of faint beeps. This will go on for about a minute, then stops. The front panel light is on at the time. It does not appear on the device manager at all.

I have tried booting the external with other computers, with the same results.

I had read in other threads that it is possible to try and retrieve the data by taking the external from the case and slaving it to an internal hard drive. My only problem is that I do not know how to do this, or even if it is possible with just a laptop (I have a Dell Inspiron 20gb hd, running on win xp).

Is there anyone on this forum that would be willing to attempt this for me? I can live with the loss of pretty much everything on there except my daughter's pictures. I bought this drive to act as a back up for my laptop as my cd writer drive is dead. Now, it has quit working before I could retrieve them. I am willing to pay. I am unemployed right now, but this means more to me than an... Read more

Answer:Seagate 320g external hd won't boot

I should note that the warranty means nothing to me. It is the files that are important. I will take any chance.
 

2 more replies
Relevance 51.25%

Okay, hey guy, here is my problem.

I've had this drive for a little while now, worked flawlessly for ages. I put movies and stuff on it and then watch it on my Xbox, I had about 30GB worth of data on it.

Now, what I want to do is: Format/reset the drive BACK to FAT32, it is currently in the "RAW" state. I have NO idea how this happened, I havent dropped it or anything it literally happened overnight. Have tried formatting at least 6 times, it always says "Format could not complete".

When I try to open it in my computer it just says "H: is not accesible, the parameter is incorrect". Have tried deleting the voume in disk management, that doesn't work either. Tried formatting through CMD, doesnt work.

I'm lost for ideas. Is my drive just screwed? I'm not bothered about getting the data back, I just want it to work again so I can get it back to FAT32 format.

Many thanks.
 

Answer:Please help with 500GB Seagate External drive ! :(

7 more replies
Relevance 51.25%

Hi,
I using XP os with seagate external hardisc 150GB.. when i plugging in the port the External harddisc dets is getting detected very late. I does Autoplay without running any files. When I right click or try to open or when i try to see the properties with Alt+Enter
the system is getting into not responding condition. Is it because of Data execution prevention? even when i tried to scan the HDisc, AVG scans it but not showing any files or object scanned and returing '0' objects scanned. Please suggest to fix this issue.
Thanks in advance.

Regards,
Venky

Answer:seagate external HD is not getting open but detected

Not caused by Data execution prevention. The drive may be corrupted, but not necessarily broken. You may have to run File Scavenger or Recuva to recover your files.

1 more replies
Relevance 51.25%

I had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record.

Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs.

This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).

Event Viewer has this entry "The driver detected a controller error on \Device\Harddisk3\DR3."

Answer:Seagate GO External HD into Internal HD - Bad Idea

There is no normal reason they would behave that way. I agree with you, a SATA drive is a SATA drive.

Are these 3.5 inch drives or 2.5 inch?

That sort of behavior could be explained by poor power or electrical connection. Check to be sure that all of the cables are securely attached. Try using alternate SATA power connectors if you have them.

If you fill out your system specs we could see at a glace if you have any obvious power over-use issues.

1 more replies
Relevance 51.25%

My seagate expansion desktop external drive seems to be dying. Its only a year old but i've filled it upto 90% of its capacity and that is when the problem started. Drive will show in my computer, disk management and even folders/files are visible/accessible but somehow i cant copy them. If i try copying, i'm slapped with extremely slow transfer speeds as below. Besides that it wont read some of the files so i have to skip them

I have even tried recovery programs and all of them recognized the drive properly but couldnt recover anything. I'm on win7 x64 and I feel there is a problem with the usb enclosure and so i want to pry it open and connect to the computer just like an internal drive. Can i do that without voiding the warranty?
 

Answer:Seagate 1tb external drive failing?

9 more replies
Relevance 51.25%

I have a Seagate external drive that I save my backups to. I run my backup around midnight, when the computer has not been used for a good 5-6 hours. I have been getting errors with the backup that the drive has not been accessible and thus the backup is not successful.

When I double click on the drive icon in This PC , is takes about 20 seconds for the green bar to scroll across the top of the dialog box before I can see the full contents of the drive. The old Seagate software used to allow me to adjust the properties of the drives to make sure the drives stay awake at all times. As has been posted elsewhere, Seagate has not updated its software to be compatible with W10.

So my question is are there any other ways to make sure the external drive remains accessible after not being used for a while? Thanks for any thoughts.

More replies
Relevance 51.25%

Okay, so this is how it started. I had my Android tablet (Acer A500) hooked to my x64 Windows 7 PC, to transfer a file to it. After that, I tried to safety remove it, but since it uses MTP, it was not in the connected devices list, so I accidentally safety removed my Ext HDD, a Seagate 1 TB HDD with a power outlet. Since the PC said it's safe to remove the hardware, i removed the HDD, and my tablet, and hooked the HDD back on, but ever since, my computer says it needs to be formatted... while my tablet that has a USB port, and on Linux Ubuntu on my computer, it's recognized and it works fine. I've also tried another computer, running x86 Windows 7, but it doesn't work on that one either. I tried changing USB ports, no game, I also tried a reboot... no dice. I've also tried removing it in device manager list and installing it back, but it didn't help.

Please help me, I've got over 800 GB of precious data on my HDD I can't afford to lose. Since in works on Android and Linux, I don't think it really needs a format...

Answer:External Seagate 1 TB HDD suddenly needs formatting

How does this external drive show up in Disk Management?

Disk Management - Post a Screen Capture Image

3 more replies
Relevance 51.25%

OK, So i have an 1.5 External seagate drive that up until now has been running great, the main thing i keep on it is media which i access through a USB 2 connection. as of 2 days ago the drive has been acting funny in the middle of a playback it starts seeking or searching which is the best way that i can describe this. basically the media locks for a second the drive clicks like its searching and then the media restarts a few seconds later. The audio generally keeps going but the video hags during this time. I ran SEAtools looking for drive errors, defraged it, and ran a virus check on the drive to see if maybe i picked up a bug, nothing, i have also updated all my video and audio drivers, and by the time you read this probably the drives drivers also.

Any Ideas?
 

Answer:External Seagate drive keeps seeking

Kind of sounds like it might be indexing or something, is the indexing service disabled for the drive?
 

1 more replies
Relevance 51.25%

Hey all,

I'm having trouble getting my laptop to properly recognize a Seagate ST332062 as external HD.

I have the HD installed in a Thermaltake enclosure and connected the SATA connectors, I'm using the external USB port on the enclosure and connecting it to one of my USB's on my laptop.

Laptop is XP, service pack 3.

Under Device Manager, I can see the unit listed as Disk drives -> ST332062 OAS USB Drive.

It is also recognized under the Safely Remove Hardware console as a USB Mass Storage Device.

However my system won't acknowledge the drive. I've tried browsing to it using different drive designations i.e. e:/ to no avail.

Anyone ever run into this with an external drive ??

TIA
 

More replies
Relevance 51.25%

I have 3 Seagate external hard drives of various sizes, plus one Iomega 300GB HDD all of which have been working perfectly for a long time. All are passed through a D-Link USB hub to my laptop.

Recently I had to clear out the space they're sitting on, so I unplugged all the drives and laptop and put everything in a box on a shelf for about a week before putting everything back together.

When everything was plugged back in, none of the Seagates were recognized by the laptop, but the Iomega is still working fine, recognized and is accessible. Also, any of my flash drives I plug into the hub is recognized and works OK.

Neither Device Manager nor Disk Manager show the Seagates, but they do show the Iomega.
I've tried most of the suggestions I've found on the Internet including new drivers, unplugging the power cord, bypassing the hub, etc.
I plugged one of them into my office HP laptop and it doesn't recognize the Seagate either.

So, my thoughts are that the hub is fine, the laptop's fine, there's just something wrong with the Seagates, yet it's odd that they all failed at the same time because I stored them away for a while.

Anyone have any suggestions?

Specs:
For the Seagate HDD's, model number I have is ST3200823A, which is 200GB, ST3250623A, 250GB, and a 350GB(?), all "Push Button", USB 2.0.
Laptop is an eMachines M5405, Windows XP SP2, AMD 1.6GHz, 704MB RAM.
 

Answer:Seagate external drives not recognized

When you plug in the Seagates (one by one), put them up to your ear and make sure they are spinning up properly. If you here any clicking then it might be the drive. Also, hold the drive horizontally in your hands and move it in a circular motion. If you feel a cyntripical force, then the platters are spinning. Seagate has been know to have faulty external drives. Let us know what you find out.
 

2 more replies
Relevance 51.25%

It seems to be one thing after another at the moment...

Windows 10 64 Bit PC is now not displaying one of two external Seagate hard drives - that was working fine yesterday.... connected by USB. the light is showing/'flickering' on the drive

Checked using RUN and diskmgmt.msc and the drive isn't listed...

any suggestions?
 

Answer:Seagate External Drive not found

6 more replies
Relevance 51.25%

i need help to recover my old photos and videos that were accidentally deleted in my seagate external harddrive while i was trying to format using my macbook 2011. what would i do?
 

Answer:Seagate external hard drive

Give this a try

http://www.piriform.com/recuva

Good Luck I hope it finds them all used it on the wife's system once and it did recover almost all .
I'm not sure if it works on usb drives or not though worth a try to see if it discovers it .
Yes it does .
 

1 more replies
Relevance 51.25%

Hello,
I recently purchased a new Toshiba computer with Windows 7 for my daughter. I also have an older Emachines desktop computer. Along with the new computer I purchased a Belkin Max share Router and a Seagate 1 TB External HD. I got the printer set properly where both computers can print. The Hard Drive is the problem. I can see it on one computer but then at times the other can"t. If I remove power from the HD to reset it; then I can access it again. makes it dificult to set Microsoft Word to automatically save files to that drive. any hlp would be much appreciated. Thank You
Haak
 

Answer:Belkin Max Share / Seagate External HD

Are you sure you didn't configure it as "another device" that only connects to a single computer until you release it?

I'm looking at the User's Manual, pages 27 and page 28, apparently there are two operating modes for USB connected devices.
 

2 more replies
Relevance 51.25%

Et al,

I utilize Windows7 Home Premium 32-bit and a 500gb SeaGate FreeAgent external. Similarly, I have on numerous occassion deleted files and done some cleaning-up (primarily 'My Documents') to no real success because they all come back after having attached my external.

NOTE: I do not perform a Back-up /or/ Sync anything. I simply connect my external via USB in order to locate a saved document already on the external from previous. This is all I do and at some point (not sure if it is after the next reboot or when exactly) but, all deleted docs reappear.

I wanted to let this be known to all of you as previous posts had mentioned back-up and/or syncing, however, I wanted to clarify that I do not do EITHER of these and have the same problem. STILL NO SOLUTION

Answer:Documents reappearing using Seagate External

I would try a backup software other than Seagate's. Unfortunately, Windows Backup and Restore is only available in Win7 Pro and above. There are free versions of most backup/imaging software, but I don't know of any that will back up files (they will back up entire partitions). Their paid versions, however, do.

Backing up the entire partition is a great way to backup, IMO if you have the disk space (an external drive is perfect). Here is a free version of an oft recommended imaging program:

Macrium Reflect FREE Edition - Information and download

If you wish to back up at the file level, you will need to pay for a full version of Macrium or another software. I use and am happy with Acronis True Image 2011.

3 more replies
Relevance 51.25%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 4006 Mb
Graphics Card: Intel(R) HD Graphics Family, 2035 Mb
Hard Drives: C: Total - 466122 MB, Free - 368156 MB;
Motherboard: TOSHIBA, ZSWAA
Antivirus: AVG AntiVirus Free Edition 2015, Updated and Enabled
I have a seagate model stca2000100.

It shows up on the device manager, but not on my computer. therefore I can't access the data.
(see screenshot)

All I want to do is get the data so I can put it on another drive. Please help!
 

Answer:Can't access Seagate external drive

6 more replies
Relevance 51.25%

Is this 300 GB Seagate a good external hard drive?:
http://www.amazon.com/gp/product/B000EN62YG/sr=8-3/qid=1154971809/ref=pd_bbs_3/103-3008107-9730230?ie=UTF8

Also, can external hard drives purchased on Ebay be trusted?
 

Answer:Seagate external hard drive

8 more replies
Relevance 51.25%

I am using an 80G Seagate external HD on my Dell PC (using XP).

it was working great, but suddenly I cannot access it. I can see is through the Disk Manager, but when I double clisk on it it says the drive is not formatted. I don't want to reformat it since there is so much data. Others have said that somehow the partitions have been removed. Does anybody know how to fix this?
 

Answer:Seagate External HD stopped apearing

Free:

Testdisk Documentation
Testdisk Download
Partition Find & Mount

Commercial:

Diskinternals Partition Recovery (Demo)
[email protected] Partition Recovery
Bootmaster Partition Recovery
ZAR Partition Recovery
DIY DataRecovery DiskPatch
Partition Table Doctor
 

2 more replies
Relevance 51.25%

Hi guys...

I'm considering purchasing an external hard drive..i have hundreds of backed up DVDs, and my 1.5 TB is still nearly at full capacity!

Anyways, I was wondering what exactly is the difference between these 2 Seagate ones (especially given the price difference)

Seagate Expansion Portable Drives | Seagate
and
FreeAgent Go: Sleek & Stylish Portable & External Storage Hard Drives | Seagate

I found the 500 GB of the first one for $88, while the 500 GB of the 2nd one is for $115! (though, a 640 GB of the 2nd one is for $107..weird)

Does anyone know what exactly is the difference between the 2, 500 GB ones? (to justify a $27 difference?)

PS: I also found this 500 GB WD one for around $98

My Passport Elite 500 GB USB 2.0 Hard Drives ( WDBAAC5000ACH )

Any preference between Seagate and WD?

Thanks!

Answer:Help buying an external HD (and the difference between these 2 Seagate ones?)

I can not see a difference between the Seagates. I think those are just different models that were made at a different time.

As for models, I trust both WD and Seagate. I prefer WD over Seagate, but that is only my personal opinion, as 90% of all my HDDs are WD. If money was a factor, I'd go with either.

Also IMO, externals that come with AC power cord are safer than the USB powered.

1 more replies
Relevance 51.25%

I recently bought a second (and larger) Seagate external drive. Unfortunately, having set the new one up, the first is no longer recognised by my system. It is still fine, as it is recognised by my laptop.

Someone has suggested to me that the driver for the newer drive is, in some way, stopping the older one from being recognised.

Has anyone got any suggestions on how I can use both drives?

Answer:Two Seagate External Drives, one not recognised

Check the two drives in the Disk Management. Right click Computer > Manage > Disk Management.

If a drive letter is not assigned to one drive, assign a drive letter.

6 more replies
Relevance 51.25%

i have a seagate external hard drive that i've had for one year. it stopped working after working with no problems.
the green power light does not come on but the white light was blinking then stopped.
any idea's on what can be done. and if it will not work any more is there any way to extract my family pic's and work from the hard drive.

thanks for any help.
 

Answer:seagate external hard drive

It sounds like the external harddrive has died - do you have copies of the files on your computer as well?

Assuming the drive is dead and it is not an issue with the USB connection, it is possible to get the files off of the harddrive though companies that provide such services often charge a high price.
 

3 more replies
Relevance 51.25%

Assistance needed please. Have multiple problems with Acronis 2011 and Seagate 3TB External HD. Check disk scan at every start up; no errors. "Acronis True Image Service Encountered a Problem and Needed to Close," at every start up. "Delayed Write Failed" error on every external hard drive partition every day. "The request could not be performed because of an I/O device error" every day. Full system backup fails everyday. Have windows xp, SP3.

Assistance greatly appreciated.
 

Answer:Acronis 2011 Seagate 3TB External HD Help

14 more replies
Relevance 51.25%

Ok my dad had this seagate external with a 160gb seagate hard drive in it. He took it out and put it in his computer and gave me the empty external. When I put this 120gb maxtor in the external unit and plug it in it finds all kinds of stuff but what you would normally see when you plug an external drive in. Any solutions?

More replies
Relevance 51.25%

I have an external Seagate Drive that shows up in my Windows 10 desktop Device Manager under Disk Drives as "Seagate Desktop USB Device" and it states "Working Correctly" but it doesn't show as a drive in Explorer/MyPC.
I can feel vibrations suggesting the drive is alive and the drive light is on but I can't get to it.
Have tried different USB connections without change. Have tried uninstalling and rebooting without change.
Any ideas ?

Answer:Can't access my external Seagate Drive

Go into disk management, if it the drive does not have a letter assigned to it right click on the drive and select change drive letter and path to assign a drive letter.

2 more replies
Relevance 51.25%

i hv seagate 320gb HDD
when i pluged in to laptop (OS Win XP SP3) its
detected & shown in Device manager as
"Initio"combo device class"
Initio default controller "
but explorer not shown any new Drive

every time i connect & disconnected the HDD Bell Sound ( DING dong)
but nothing happen
I also use on my desktop PC with OS vista Again same os MSG box instal device driver
But when
I tried in OS windows 7 & its shown prefect

plz suggest me any device driver ?? any other solution for this
 

Answer:Seagate 320GB external HDD not showing in XP SP3

We would like to know more about your equipment and configuration and recent history
 

3 more replies
Relevance 51.25%

I use an IBM Thinkpad with Windows 2000 to play my music files for my own DJ service. I quickly ran out of memory, so I purchased an Seagate external hard drive. I am definately not a computer genius, and am having trouble. I can see my external when I go to my computer, and I have named it F: What do I do now!?? How do I save music files to the external, and do I have to do something special to play files that are saved to it? Any help would be appreciated.
 

Answer:music files to Seagate external

You use the external drive just like your internal one. You can create folders, copy files, etc. Fire up Windows Explorer and have at it.
 

3 more replies
Relevance 51.25%

My laptop Dell Latitude D830 running XP Pro does not recognize the external Seagate 250 gb drive, even under device Manager. Iíve tried it under Slave, Master and Cable-Select Option but with no success. Any ideas? It was in a DVR and Iím just trying to recover some of the recorded movies.
 

More replies
Relevance 51.25%

I have an Iomega 1T external drive which I cant access. I can see it on Device Manager but it doesn't appear on ThisPC. The volume is showing on List Volume as E: but status is "No media". Disk is not spinning. Is there anything I can do?

Answer:Seagate external drive not spinning

can you feel it vibrating?
3.5 or 2.5 drive does it have external power to it
3.5 check power to drive, 2.5 try another USb port and or USb cable.

8 more replies
Relevance 51.25%

New to the forum and I have a silly question regarding my external hard drive which cam with no instrucions or information other than an istallation page.

It is product number 9bd862-560. Question, can I leave this on indefinately or is this something that should be turned off daily. I have a program set up to automatically save information so ai need to know for scheduling purposes. Any help would be greatly appreciated.
 

More replies
Relevance 51.25%

Have connected the Seagate 1TB slim, manufactured aug 2017, using a Deltaco cabinette. When connecting this cabinette using USB to a Win7 x64 computer, the drive is NOT detected. But when connecting same cabinette to a WinXP x86, it IS detected.
This clearly points to Win7 and a missing device driver. Seagate has no drivers for download. So the finger is pointed very hard to Win7. But no one at MS is willing to help out, neither Deltaco or Seagate. But is it ok to this sh-t....
When connecting the cabinette with the HDD, it starts blining and this blinking goes on for a very long time. After an hour or so
it stops blinking, but no drive is detected. It was formatted on the WinXP x86 computer with standard parameters.
So, how to I remedy this?


developer of embedded apps using VB as complement

More replies