Computer Support Forum

Windows 10 not booting past initial "screensaver?" screen

Question: Windows 10 not booting past initial "screensaver?" screen

Following Windows deciding to install its (presumably) latest updates this afternoon, I can no longer fully boot my machine. It powers up OK, the monitor has life, but the whole boot-up process sticks at the "screensaver?" page - in my case a stock Microsoft photograph looking out to sea and some large rocks from within a cave, the screen that appears before, normally, you can enter your pin to continue boot-up. In the bottom right-hand corner of this screen is what appears to be a Power Icon that I've not seen before and with a dreaded cross on it. Clicking on this does nothing.To compound the issue my DVD unit seems to no longer read discs (it opens and closes OK), I mention this in case relevant, but I am able to access the Bios options on booting.
I downloaded via another PC the Windows 10 install disc to USB from which I have attempted to boot, again without success, and have also tried various options that I have been able to access such as "Repair"as well as trying to restore the unit to the solitary restore point accessible, created around the time everything went wrong! The Restore failed too and frankly I'm out of ideas .. and frustrated to say the least!
Any suggestions would be very much appreciated, believe me!

Relevance 100%
Preferred Solution: Windows 10 not booting past initial "screensaver?" screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows 10 not booting past initial "screensaver?" screen

Logon Screen I suppose?
See: Windows 10 stuck at log in screen after upgrade Fix: Windows 10 Black Screen problems

1 more replies
Relevance 105.37%

Stable Win XP system now fails to get past initial Windows screen when booting, If you press PF5 when booting can go to safe mode with or without networking but can't access printer from this mode.
If you do go to safe mode and run the SP2 update file (which is already applied to the system) the system will install it and reboot for ONE TIME successfully. All functions seem normal, Upon shutdown and reboot the system starts OK but hangs at the point where there is a Windows screen and a sliding horizontal bar at the bottom but it never turns on the audio or goes any further than this screen, This system has run without problems for years,
BIGHANK

 

Answer:WinXP fails to get past initial Windows screen when booting

When Windows will only run in Safe Mode it's almost always because you've recently installed a driver (or installed some software that installs a driver, like CD-burning sofftware, third-party firewall or AV) which Windows does not like for whatever reason. The logic of this thinking is that Windows does not load any third-party drivers (except network driver when required) in Safe Mode, which is why a driver problem is the most likely cause.

Think hard about what you've installed recently and remove it.
 

1 more replies
Relevance 96.76%

I seem to be in a loop that will not let me boot up-tried all safe modes and normal start options-how can I get to start menu to restore system??? HELP!!!!!!
 

Answer:start up cant get past "sorry for inconvienence" screen windows 200xp media

I have a compaq presario v5000,win media xp,amd processor, cant get through loop-tried starting in all modes -always loops back to "inconvienience ' screen--- how can I reset or whatever to get to start menu? once I am there i can restore system.
 

2 more replies
Relevance 96.76%

Last night, I attempted to install a linux distro alongside 7, the installation failed, so I gave up and just rebooted to 7.

It got stuck on the "Starting Windows" screen, so I preformed hard shutdown and when to the "Startup Repair" utility and it attempted repairs, it then said that the repairs were unsuccessful, so I restarted and windows loaded to the desktop. Success! or so I thought...

After a while, I shut my laptop down and went to bed (as you do). When I needed to use it this morning, it wouldn't load past the "Starting Windows" screen again, so I shut it down and restarted and it went the desktop.

Answer:Occasionally wont load past "Starting Windows" screen

Hi,

Can you access the Advanced boot options?

Advanced Boot Options
Choose Last known Good Configuration



   Tip
Use the up-arrow and down-arrow keys to move the menu’s highlight to Last Known Good Configuration (Advanced), and then press Enter as the mouse won’t work at this screen.


Your computer should load successfully, and Windows 7 will discard the bad configuration and return permanently to the last known good configuration.

Alternatively:

Are you able to restore back to a point to before you tried to install linux distro?

System Restore

Cheers

Dave

3 more replies
Relevance 96.76%

Hi guys!

So i tried installing windows 7 Home Premium using an empty HDD. The old OS was Vista, and it was located in the same HDD. I managed to install Windows 7 successfully, but when booting after the install it crashed right after the "starting windows" screen. It then gives me the choise between starting the startup repair tool, or to start windows normally. When i run the startup repair tool it can not fix the problem. I've tried different HDD but the problem still persists. The fact that I haven't got a clue what to do really annoys me. In addition it isn't even my own pc. My dad's vista started failing on him. So I figured: Hey, why not install windows 7 using my old disk from a pc I don't use anymore. I appreciate all help.

Specs:

MB: ASUS P5N-D
CPU: Intel Core 2 Quad Q6600(2.4 GHz)
GPU: XFX GeForce 9800 GTX
HDD: Samsung Spinpoint T166 250GB. (SATA 2)
RAM: Corsair Twin2X 6400 DDR2 (2048 Mb*2= 4096 Mb)
PSU: Corsair (550 W)

Answer:Unable to get past "Starting windows" screen after Vista to 7 upgrade

Quote:





Originally Posted by pip22


Did you (as is recommended) delete the existing Vista partition first?




It was seperated in two parts. One with Vista in, and one for other files. I cleaned the whole thing, and deleted the part where Vista was located. I think it was seperated into one part with 208 Gigs and one with 25 gigs. The smallest with the OS in. The HDD works on my own computer.

5 more replies
Relevance 96.35%

Hi there, I am running windows Vista. When I turn the computer on it stops at the screen where there is the windows vista background and the words "Loading".
I'm not sure what information I should post here, so if you think you can help me just ask me what you would like me to tell you about the situation and I will reply quickly - hopefully.
Thanks for your time and effort.
 

More replies
Relevance 96.35%

Hey guys I appreciate you reading this, you have no idea how great having forums like this is where we can help each other out.

I have gotten a virus and within minuets it got worst. My antivirus was not updated and the security was low, so when I got the virus I downloaded malware bytes on my desktop, put it on a USB drive and tried to install it on the laptop, I could not add a USB drive. My next step was to hook the HD up to the desktop and add it that way (the problem with that I had to activate the sata port via bios and when that sata port was activated it would boot that port as master everytime, the weird thing is even if I hooked the desktop sata to the second port it would load the laptop drive first everytime it did not matter what port) This is besides the point, because I dont even think this method will work because like I said in the title the HD will not load past the "Starting Windows" screen, and when in safe mode it will not load all the system files, the malware obviously deleted some important files...

The next step I am going to take is inserting the windows 7 cd and trying a system restore... What do you guys think? Am I at the point where I will loose all of my important files, by doing a reinstallation or is there a way to save those files?

Thanks guys
 

More replies
Relevance 96.35%

Hi, being new here. I just discovered having this problem today. First thing this morning I went to my computer. When the login screen came up, I entered in my user and password. Then I saw the "Welcome". Which stayed there for about five minutes before I restarted the computer, which didn't fix my problem. I tried Safe Mode, which didn't make a difference. It didn't take as long, but then I saw the blue screen. It said something like "---- unexpectedly close." Then at the bottom there were memory dumps. I couldn't see what was there because the blue screen was there for five seconds, before the PC restarted itself.

It was working fine last night. Before my six year old sister was playing with the computer despite my attempts to make a password account and full parental controls.

I believe I did manage to log in to another account that's not the administrator, but when I when to modify the user accounts the whole motherboard crashed. Every program, even the desktop. I couldn't do Alt + Tab and the Ctrl +Alt + Delete.

Please help me fix this thing. I need it to do my classwork.

Answer:Windows Vista- I cannot get past the "welcome" login screen

Try waiting longer (30/60 minuits)... If it starts up after that your software messed up, backup ur school work and stuff like that and re-install windows.

If it doesn't I can't help you..

1 more replies
Relevance 96.35%

Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".
If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.
From the Startup Repair Screen however, I can launch command prompt and restore options, how can I fix this, a restore is not really an option because I have not set up a restore point in a while.
Any help would be greatly appreciated.
Thank-you in advance.

Answer:Won't load past "Starting Windows" screen

It's possible that you can't access the actual startup repairs from within Windows itself. You might have to boot from either an installation disk or a previously made system repair disk. And it might take running the startup repair 3 times before all issues are fixed.

Startup Repair

4 more replies
Relevance 96.35%

Hi all,

Every time I turn on my Dell Dimension 5150, I get greeted with "We apologize for the inconvenience... Windows did not start successfully".

My options are:

Safe Mode,
Safe Mode with Networking,
Safe Mode with Command Prompt

Last known good config...

Start Windows normally.

I have tried every option on several occasions... the windows xp logo comes up... then the dell logo comes up, everything seems to be running smoothly... then comes a black screen with a small flashing dot in the top left... and then I see the same"We apologize for the inconvenience... Windows did not start successfully" screen.

Any ideas?
Thanks in advance.

Answer:Can't get past "Windows did not start successfully" screen...

Have you added any new hardware just prior to this happening? If so remove it and try again.

Did you install new software or run windows update just prior to it happening?

Without much to go on it may be worth doing a windows repair installation. It sounds dramatic, but it will not destroy any of your data or files, just attempt to repair the windows os installation.

There is a step-by-step guide with pics here. Hopefully that will resolve your problem if windows became corrupt somehow...

4 more replies
Relevance 95.53%

hello everybody, i'm kinda new to the site. i found it while searching my problem on google. anyways, i have a compaq presario 2500 laptop with windows xp home edition sp1 installed. I had left my computer at the desktop screen to go do something and when I came back avast antivirus had come up with a message saying that one of my files was infected with a trojan. i believe the file was stored in the system or system32 folder. anyways, it had reccomended me to move the file to avast's "virus chest", so I did. and i went ahead and worked on my laptop as normal. then after shutting my computer down and starting it back up later in the day, i found that my laptop would not load any further than the blue "windows is starting up..." screen. i let it sit there for about 30 mins. so then i went to my desktop and started researching my problem on google. i tried going into safe mode, but it still gets stuck at the same screen. i tried the option for booting with the last good settings, and that didnt work. then I found an article on this site that reccomended doing an xp repair with xp install cd. i did that, step by step, and that still did not do the trick. it still hangs at the "windows is starting up..." screen, even in safe mode.

i'm getting a bad feeling that I am going to have to format the hd. There's alot of data on my laptop that I didn't have backed up, so I was wondering if you guys had any other ideas that I could t... Read more

Answer:cannot get past "windows is starting up..." screen

7 more replies
Relevance 95.53%

I bought my laptop about 6 months ago, came with Windows 7 32Bit on it. Worked fine until this morning. I started it up, and it goes until the Starting Windows screen and freezes. I have tried numerous different things, system restore didn't work, F3 on startup and "Fix Errors" didn't work, messed with a bunch of the settings you get to from TAB/F3/F11 on startup, still nothing. It didn't come with a Windows 7 install CD, and I pretty much gave up on it so I went to do a system recovery and wipe everything fresh. I cannot even do it, because when I try to do system recovery, it still goes to the windows screen and freezes. I downloaded and burned an ISO file to boot off of, which works for a second, then straight back to the windows screen and freezes.
I can still start up in safe mode, in fact I am writing this from safe mode right now. Is there anything to do? Please help...and thank you in advance.

Answer:Help Please! Cannot get past "Starting Windows" Screen.

boot into safe mode,press f8, try" boot to last know good config" or if that doesn't work, try booting to an older restore point from safe mode. the way to do this when in safe mode: run/cmd/rstrui.exe. this has worked for me.

1 more replies
Relevance 95.53%

I have an said laptop and it won't start at all anymore, I turn it on and I get the said logo screen then it goes to "starting windows" screen and freezes with like a fuzzy blue line on top of the screen. I used my recovery CD and tried all 3 reformatting options and nothing works, after all 3 it just restarted my laptop and it continued to have the same problem again. Starting to get really frustrated lol, anyone had this problem before?
 

Answer:cant get past "starting windows" screen

13 more replies
Relevance 95.53%

Just like the title says. I had used my computer a few days ago and it worked fine then the next time I tried to start it up it would just take me to the Windows error recovery screen or start windows but would never load past the starting windows screen. The error recovery menu helped me none whatsoever. I also had not previously created a restore point so it's not possible to restore my system to and earlier date when it was working properly. To make matters worse I cannot seem to locate any of the discs/software that came with the computer. If possible I would just do a system format because that looks like my only option after trying numerous fixes. The problem is I have important documents and lots of family videos that are still on the hard drive that I had not backed up externally. I'm assuming something crashed and this is what is preventing my computer from starting up properly? If anyone could provide me with some sort of insight on how I could fix this big mess it would be greatly appreciated!
Cheers.

Answer:Cannot get past the "Starting Windows" screen, please help!!

win7 recovery environment->startup repair. Does it find any error (click view diagnostics results). 0x0 means no errors. Any errors?
win7 recovery environment->command prompt

Code:
dir c:
dir d:
dir e:
Now you know drive leter of OS drive in recovery environment. Assume it's E

Code:
chkdsk/f e:
Post results.

Can you boot in safe mode? If not, tell me exactly what's happening then

7 more replies
Relevance 95.53%

As stated in the title, my computer hangs at the "Starting Windows" screen.
I'm using an iMac 9.1, with a bootcamp partition on Windows 7. (I can't access my Mac OS X partition at all).
I don't have a Windows 7 Installation disk or any peripheral disks.

I left my computer on all night and when. I woke up the next morning only to find out my computer just had a BSOD. I force shut down my computer then it just hung at the "starting windows' screen. Im assuming its a driver problem, since I can log in using safe mode. Also startup repair doesnt work, it just gives my a black screen.

I've been working on this for 5 hours now, and i can't figure out a way to fix this problem. Reply ASAP
 

Answer:Can't go past "Starting Windows" screen.

If you can't access the mac OS and Windows is on the same hard drive - it makes me suspect that the HDD is fubar.
 

3 more replies
Relevance 95.53%

Using Win 7 x64, Intel i7 965, Asus Rampage 2, 32gb memory, 2 Intel ssd running RAID 0, 2 Seagate 500gb drives RAID 1. Had the Seagate hard drives fail, but were under warranty and they replaced them. Do NOT have them on-line at present time. Have tried to re-install system (had upgrade DVD for Win 7), but was not able to get the system to recognize the DVD because I can't get to OS. Am unable to get the system to do anything. Have checked BIOS to make sure drives are RAID. Since hardware comes up and ssd's come up,and graphics seems to be ok, am unable to figure out problem. Any ideas, anybody?

Thanks

Answer:Can't get past '"Starting Windows" screen

I'm assuming you had the two Intel SSD's RAID as your Win7 drive, and the two Seagates which failed were a Data RAID. So why do you need to reinstall the OS? Just reinstall the Seagates in a RAID if you want.

If the SSD's were not the OS RAID then why not? Install Win7 to them to get best performance.

9 more replies
Relevance 95.12%

Help! This is so weird. My computer was frozen so I tried to restart it. I was re-booting it, but the "Starting Windows" screen was taking a really long time. I tried restarting it several times, it did nothing. I tried running the second option it gave me when i restarted, which was something like "run system restore" but that did the same, on a different loading screen. I have a HP Pavillion DV7, and it came with a "Quick Links" screen, before the startup, where I can access an internet browser, mail, calendar and skype. I am using that right now, so I don't understand why I can't go to my regular windows screen? I'm really confused, I tried pressing the delete button and f10 right when I started my screen, but it would be a black screen then my computer would shut down.... My warranty ran out last month, please help?
 

Answer:Can't boot up windows past the "starting windows" screen, can't run system restore

Re: Can't boot up windows past the "starting windows" screen, can't run system restor

Tap F8 while booting and see if you can get to safe mode. If you can, try a recovery from there. You also want to backup if you get there. Sounds like a failing hard drive as a first quick guess so scan your drive for errors.

Windows Explorer, right click drive C, check for errors.
 

1 more replies
Relevance 93.89%

Ok! My friend told me her mouse(ps/2) was not working all the time so I advised her to buy another mouse. However, she didn't advise me unitl later that it has also started smoking before it went out completely. She purchased a new mouse(usb of course) and windows kept telling her mouse was not detected, even though there was a usb mouse installed in the computer. The computer was still working though.

So I went to her house to check on the error message. I went to check set up and found the option for "PS/2 Mouse" set to auto detect-which is what it should have been set to, right? Well, I placed the "USB Mouse" in a different usb slot and windows kept restarting. I put it back into the slot she had it in and the same thing (windows kept restarting). I selected last known good configuration, safe mode, and start windows normally and they all kept restarting the computer. I then gave her another ps/2 mouse I had laying around the house, with other computer parts. I put it into one of my systems with Win XP Home, before taking it to her and it worked just fine. Not in her system though, it still kept restarting.

Finally, I removed the hdd and took it to my house to recover her information on it. After which, I took it back, reinstalled it and inserted my Win XP Home installation CD to repair her copy of windows. I was unsuccessful because it kept asking for the administrators password and I am the administrator, but it would not accept my... Read more

More replies
Relevance 93.89%

Hi, i was simply surfing through ESPN and youtube when I realized that my Laptop (Gateway NV79) was running quite slowly and then after a while it completely froze. I couldn't do anything, nothing i did would work . So unfourtunantly i had to hard shutdown it.
And here's what happened after i rebooted it, It comes up with two options
1. Start Startup Repair(Recommended)
2. Start Windows Normally

-I go to "Start windows Normally" and it goes to boot up normally, but then after the Windows 7 logo appears it just stays there and nothing happens
-I go Launch Startup Repair and it says loading files, but then it goes to a black screen with the logo © Micosoft Corporation and nothing happens

-I tried F8 advanced boot but it doesnt do anything
-I tried safe mode with networking, it says loading files and please waitt but even after 10 mins it just stays the same
-I dont have win 7 CD
Please assist me if you can I am in dire need.
 

Answer:My computer wont get past the windows 7 "starting windows" screen

I think I would run memory and hard drive diagnostics. Maybe included in your BIOS (Setup) or Recovery partition or set of Recovery DVDs tools. Memtest86+ is a popular test. The hard drive manufacturer usually has the best diagnostics for it.
 

1 more replies
Relevance 92.66%

problem: windows will not boot past the "starting windows" screen. The processor gets really hot as if its trying to do something but it never makes it to the desktop.

When I launch startup repair, the automatic startup repair tool always fails to fix the problem (surprise)
When I view the problem details, I get this:

Problem Signature:
Problem Event Name: StartupRepairOffline
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 55
Problem Signature 5: AutoFailover
Problem Signature 6: 1
Problem Signature 7: NoRootCause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

My computer: Compaq Presario Cq62-238DX Notebook
Windows Home Premium

Ran chkdsk, no problems
tried a clean boot (no startup programs), did not get past windows startup screen
it boots into safe mode just fine, but I don't know what to do from there
tried repairing the boot sector. That didn't work.

Not sure where to take it at this point. Please help.
 

Answer:windows will not boot past the "starting windows" screen.

Did you try the Windows 7 DVD. It has a repair option too. (I'm not sure which repair you are referring to).

In my experience the repair option in the Windows 7 DVD fixes pretty much everything. If you have tried this and the problem still persists, I'm afraid that this could be a hardware problem. See if you can take it to the service center.
 

1 more replies
Relevance 92.66%

I'm using a dell inspiron 1440 laptop, recently replaced my internal hard drive with a new solid state drive. It was working fine until today when I tried to boot my laptop up, and it gave me a BSOD before reaching the "Starting Windows" screen. Subsequent attempts at selecting the Startup repair and start windows normally options only gave me "failed to repair", and the windows logo getting stuck respectively. Safe mode cannot be started. However, when I tried to launch startup repair from my win 7 installation disk, I found that my HDD is not detected by my laptop. Subsequently, my laptop has also told me to reseat my hard drive. I reseated it a few times, but it did not solve the problem. Diagnostics ran on my laptop did not identify any problems. Any help will be greatly appreciated.

Answer:Windows 7 unable to get past "Starting Windows" screen

Have a look at this tutorial:

Troubleshooting Windows 7 Failure to Boot

3 more replies
Relevance 92.66%

Hey yesterday I got some sort of spyware or bug and my computer started acting funny so I turned it off and upon turning it back on I couldn't get it to boot. I've tried all the safe modes, tried booting from the windows 7 dvd to repair or reinstall the os but it won't make it past the starting windows screen. I suspect that the master boot files have been removed or corrupted by the virus (which was called "guo" in my task manager). So I'm stumped. Any help would be greatly appreciated.

Answer:windows 7 won't boot past "starting windows" screen

You should post this information in the System Security forum.

Start a new thread and someone will help you.

Edit: it's moved.

Definitely agree with Borg and Golden, AV Rescue Disk is the best place to start.

4 more replies
Relevance 90.61%

Hi All,

Whenever someone in my family walks away from using the computer with Windows Vista, after the Screen Saver, I'm always taken to a screen that allows only the last user to log back in, but when someone else wants to log in, they need to hit the "Switch User" button to choose a different name.

My question is... Can I have the computer just go back to showing all the users' names (so I don't have to click the "Switch User" button to login as me). I would like this to work, just as XP did... so if the last person who used the computer has to log back in, s/he would just have to click their name again...just like XP did.

Thanks so much!
CG
 

Answer:How do I bypass "Switch User" screen, after ScreenSaver to login as another in Vista?

6 more replies
Relevance 90.2%

Hi everyone,

At present, I have a problem with my computer. It sometimes hangs when it's booting into Windows(Windows version: Win 7 Pro), but it rarely happens. When it occurs, on the
screen it just shows "Starting Windows" texts without the Windows logo animation. I'd like to figure out what could potentially cause this problem, so I made an experiment, which is setting up the WinDbg on another computer and turning on the debug
mode in my computer, and using a null-modem cable to do com port debugging. Hopefully I can get some clues from that.

After rebooting for about 900 times, it hung again and from the WinDbg, it revealed the last loaded driver was CLASSPNP.sys and the previous loaded driver was disk.sys. The
computer is equipped with two hard drives and the capacity for each is 500G. For some reason, I made these two hard drives totally reveal the capacity of 250G in the system by hard drive clipping. In addtion to that, this motherboard has RAID chips on it,
and its connecting way is through soc PCH sata port -> raid chip->hard drive. Another questionable point is that there is a PCIE to UART adapter card on the motherboard. I have a few questions : 

1. What do CLASSPNP.sys and disk.sys do while Windows is being loaded? Does it hang because it keeps waiting for devices' responses but somehow those devices just don't talk
back to the driver? If so, what can cause these devices to fail to respond to this driver?

2. Has anyone r... Read more

More replies
Relevance 90.2%

Hi

I have recently bought an LCD logic LCX20LN1 20" tv which has a pc input. When i booted up my pc with the new screen attactched, just after the windows loading screen came up it came up with this message on the screen "out of range". I heard that this happens when you purchase a new monitor but have still not found any help on the internet about how to fix it. I am using Windows XP. Also the TFT screen that i used before that was 17" if that helps.

Thanks
 

Answer:New LCD logic 20" screen. When booting up pc comes up with "out of range" message

Did you uninstall the drivers for your previous monitor before installing the new one?

"out of range" is most commonly caused by a resolution\frequency setting that the monitor does not support.
 

7 more replies
Relevance 90.2%

Hi everyone, my dell computer first started getting some battery problems where the adapter was unable to charge the battery but the laptop would maintain the same level of power while plugged in, and if unplugged would die immediately. This problem coincided with network adapter problems where my computer could not properly connect to wireless networks. Now after logging on my laptop will not go past the windows starting screen. I have replaced my battery and my laptop is able to recharge but the starting screen problem persists and makes my laptop unusable. I am unable to start in safe mode and repairs don't seem to work. Any suggestions?

Answer:Windows won't go past "starting windows screen"

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.

2 more replies
Relevance 88.97%

I have been using Dragon Natural Speaking 12 Premium for many months and all was going well until last week when I downloaded and installed an update. After that, whenever I open the program from the desktop icon, the "Loading" screen appears but nothing happens after that. Also, I have to use Ctrl-Alt-Delete to end the program. (Right clicking on the tray icon and closing "close" does nothing. I have downloaded and used the DNS 12 uninstall "tool" several times and re-downloaded and installed the program, but the same thing happens, the program's "Loading" box appears but gets "stuck" there. I have asked the gurus at www.knowbrainer.com and on Nuance's Forums but they seem to be stumped with DNS's behavior after installing the update. Does anyone know what is happening? Thanks for any and all replies/suggestions.
 

More replies
Relevance 88.97%

When I turn my Dell Inspiron E1505 laptop computer on I get the black screen that asks to start in safe mode, safe mode with networking, safe mode with command prompt, last known good configuration or start windows normally. I've tried each of them and it always goes to the blue screen with the following: Stop: c0000218 Registry file failure The registry cannot load the hive (file): \SystemRoot\System32\Config\System or its log or alternate. It is corrupt, absent, or not writable. Beginning dump of physical memory Physical memory dump complete. I have tried using my Windows Xp disc and it won't load. I don't have a recovery disc, but I used every disc that came with the computer and each time it goes back to the blue screen. Does anyone know how or if this can be repaired. If so, please give me simple step by step instructions.
Thanks for any help I can get!
 

Answer:Unable to get past blue screen "Registry file failure"

6 more replies
Relevance 88.97%

As the title says, my Inspiron 3521 will turn on but can't get pass the Preparing Automatic Repair screen. That screen will pull up and then go to black. I can't access anything on my laptop. Any help would be appreciated! Thank you!

Answer:My Inspiron 3521 Won't Get Past The "Preparing Automatic Repair" Screen

Run a full diagnostic on the hard drive. F12 at powerup BEFORE Windows begins loading.

1 more replies
Relevance 88.97%

I have a laptop with Windows 7. I was playing games on it today and suddenly browser closed. Then everything else closed and logged out and my laptop completely shut down. When I tried to turn it on again, a blank black screen with a flashing underscore "_" comes up and none of my keys work. The F8 key does nothing. I have turned it off and on many times. Please help!
 

Answer:Laptop won't start up past black screen with blinking "_"

StarJune,
Welcome to TSG.
From your description of the fairly normal but unrequested shutdown, this could possibly be a windows update that failed.
What type of laptop is it? Do you have the Operating System disk? If not you can and probably should order one from the manufacturer.
Take a look at http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

I would attempt a Startup Repair first, then try System Restore.
 

1 more replies
Relevance 88.97%

Hello all,

I have a Compac desktop, it's relatively new as far as use. Recently, it's not been used because of a startup issue. It will load the first screen (The compac screen and act like it's it going to load up) but then loops back to the first screen and continue to do this over and over. My mother told me that the computer had fallen off of out computer hutch (About 2 inches off the ground) and heard an interesting noise inside. She described the sound like a CD hitting the floor, but I looked inside the desktop, and nothing seemed to be out of place.
I want to get the data files and documents, but as stated above, I cannot use the computer.
I have a Ubuntu CD already made, and have used it before.. Unfortunately, the CD drive doesn't seem to be recognizing the disc. I can see the little white blinking "-", but that is all I can get to come up before the screen goes into another loop; and the previous process.
I was hoping some one could possibly help me out in getting the computer to the point to save the data? I have the option to reformat the whole computer, but I'd rather save that for last measures if the data cannot be recovered.
Again, the computer is a compac, Windows XP OS, desktop - only about 3 years old.
 

Answer:Computer will not boot past the "Compac" startup screen.

6 more replies
Relevance 88.97%

Hi I was using ubuntu on my old shuttle xpc and decided it wasn't doing it for me software-wise so tried to reinstall windows xp.  Everytime i tried to boot xp i would get so far and then get a message " The file dac2w2k.sys is corrupted press any key".  I tricked around with different bios settings with no joy so then went to "restore fail safe bios" (something like this).  Now when I turn on the machine i just get to the first screen with the intel picture and cant get any further.  I've tried going into the boot screen but it just says "loading boot menu" and nothing happens.  Same happens when i try to get into the bios.  My knowledge of the hardware workings of a pc is little to none so i've no idea how to reset the bios, if this is in fact the problem.  Could anyone advise me? I would be so grateful.Thanks

Answer:Cant boot past "intel inside pentium 4 " screen

Hello,In order to reset the bios: 1 Unplug your computer from the wall.2 Open up the side of the computer case.3 On the motherboard there is a little button cell battery. Take it out.4 Leave the battery out for about 5 min. 5 Put the battery back in and your bios should now be reset.

7 more replies
Relevance 88.56%

Hi, my Acer Aspire 5610Z laptop is only loading up to the "welcome" screen, with the spinning blue circle. This has been happening every few weeks for the past few months, and I can usually get it to work, but now it isn't. I've tried Startup Repair, System Restore, chkdsk /f, and the "ctrl-alt-del at the welcome screen" method, all to no avail. Safe mode boots fine. I could back up my files and restore the computer to factory settings, but I'd rather that be a last resort.

Any ideas?

Edit: I am on Service Pack 2, by the way.

Answer:[SOLVED] Vista won't load past "Welcome" screen

If safemode works, it could be a driver issue locking things up. Did you installe any hardware or software recently?

2 more replies
Relevance 88.56%

I am trying to help a friend of mine. When you try to boot up her Dell PC (XP operating system), it gets to the "Dell" screen with Netbios and will not go any further. I can't get to Safe Mode because I can't get by this screen. It sounds like a virus to me, but do you have any suggestions to help her? I kinda out of guesses at this point. Help is GREATLY appreciated.

Thanks ...

Answer:[SOLVED] XP - Can't Get Past "Dell" Netbios screen

Hi can you get a picture and post it so we can see the screen please

12 more replies
Relevance 88.56%

I am reasonably sure that I shut my girlfriend's computer down with no issues last night, but this morning when she turned it on the computer had her wallpaper up with no icons instead of the User login page. She hard-reset, and ever since then - no matter which user we log in as - Vista won't load past the Welcome screen.

It will load up in all three compatibility modes, but the Last Known Good Configuration only loads to a blank black screen which I can move the pointer around on.

I've run a virus scan, and jv16 Power Tools says the registry is now clean, but the computer is still having issues. Would fixing registry errors be why the Last Known Good Configuration doesn't work?

The computer is an Intel Core 2 Duo Sony VAIO, with 4GB RAM running Vista Home Premium, Service Pack 1.

Any help would be much appreciated.
 

Answer:Solved: Vista Won't Load Past "Welcome" Screen

I would undo any changes that jv16 Power Tools made.
Using a registry cleaner can and often does, cause more problems than it solves.
Do you have the Vista install DVD?
Vista repair options.
Try a system restore or a start up repair.
http://www.tnthelpforum.com/articles.php?id=177
 

3 more replies
Relevance 88.56%

I tried to reset my laptop and now when I try to set it up, I cant get past the "Hi there" settings screen that asks for country, language, keyboard layout, and time zone. I hit next and then use express settings and the computer gives me the spinning white dots and then reboots back to the blue "Hi there" screen. I can get into BIOS and have a recovery drive plugged in to the laptop, but nothing seems to work. The computer can't find the drive, or my admin password is incorrect, or something else goes wrong. This is very frustrating as I haven't been able to use the laptop for a few days now.

Answer:Dell laptop cannot get past "Hi There" settings screen

Can you log in to safe mode then try sfc /scannow from an admin command prompt. Its possible you have a corrupt user profile. You could create a new account and see if that fixes the problem. Do you have backup you can recover from? If not, you could try a repair install.

1 more replies
Relevance 88.56%

I tried to reset my laptop and now when I try to set it up, I cant get past the "Hi there" settings screen that asks for country, language, keyboard layout, and time zone. I hit next and then use express settings and the computer gives me the spinning white dots and then reboots back to the blue "Hi there" screen. I can get into BIOS and have a recovery drive plugged in to the laptop, but nothing seems to work. The computer can't find the drive, or my admin password is incorrect, or something else goes wrong. This is very frustrating as I haven't been able to use the laptop for a few days now.

More replies
Relevance 88.15%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 87.74%

Hiya,

My laptop (Dell Inspiron 1501) was really slow so yesterday I restored it to the original factory settings and started a fresh. Everything seemed to be going ok until this morning when I've turned it on and it's not going past the welcome screen when trying to load Windows up? Any ideas how I can solve this?

Many thanks, Mark.

Answer:Vista, not going past "Welcome" screen when loading up?

Try safe booting, think its f8 key during system load.
Let us know how it works out.

5 more replies
Relevance 87.74%

Windows 8 pc is coming up to the last user logged on (with an e-mail login). I need to select a local user to loggin in with.

Answer:How to get past "last user" logged on screen.

Hello Baiter, and welcome to Eight Forums.

Usually, you could click on the back arrow button at the top right to then see the other users on the sign in screen.

If you like, you could use OPTION ONE in the tutorial below to always see all users on the sign in screen instead of the last user.

Sign in - Show All Users or Last User in Windows 8

Hope this helps,
Shawn

3 more replies
Relevance 86.92%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 86.51%

I would really appreciate if someone can help me demystify my problem!

I have a two year old Asus A52J laptop, with Windows 7 Ultimate SP 1.

A few days ago I have noticed that the laptop sometimes (twice so far in the past week) wont boot after Asus logo on the black screen. I turn it off on the button and turn it on, everything seems fine. No errors reported, no safe mode, the windows works properly, without any reports. Today,however, all my accounts from the Opera have been logged out after this (probably the cookies have been messed about), but nothing was reported.

Other than this occurrence, everything seems to be working proper, so I am really puzzled in regard with the boot.

Thanks for your help and any kind of input!

Answer:Asus A52J sometimes not booting past "Asus" logo

Hi have you run chkdsk Disk Check - Windows 7 Help Forums

9 more replies
Relevance 86.1%

Hi! Last night, while playing a game, my computer froze then turned off. When I tried to turn it back on, it seemed to come up normally with the hp invent screen, then the F2 screen...except, when I hit F2, I was taken to a screen that started off with "We apologize for the inconvenience, but Windows was unable to start up normally..." The options listed are to start up in safe mode, safe mode with networking, safe mode with command prompt, last known good configuration, or start up windows normally. No matter which one I select, I am taken back to the original hp invent screen, then the F2 screen, etc...it's a never ending cycle and I am getting nowhere!
Does anyone have any ideas that might help me?
 

Answer:Can't get past "sorry for the inconvenience" screen

The System partition is damaged so you need to perform a XP Repair, for details see: http://www.michaelstevenstech.com/XPrepairinstall.htm

Checkout the section titled: XP Repair install

Good luck and Happy New Year.
 

1 more replies
Relevance 86.1%

I could sure use some help, been trying to upgrade my wife's computer from XP pro to win. 7 home prem. 64 bit. I am on my 3rd install, the 1st two times it was user error (my fault) that created the problem, this 3rd time I was much more careful but something is just not right.

Problem - after I sign in with "password" I get to the "welcome" screen and the small circle just spins forever.

I have done a lot of research and found a lot of possible fixes but nothing works.

This is a custom built system (by me) and worked perfectly with XP Pro, I recently did the same conversion on my computer system and had NO problems, I am using "OEM" install disks purchased from the Egg.

HDD - (120GB Seagate)
Power Supply - 500w antec
RAM - (Corsair 2GB DDR2 XMS PC2 6400)
CPU - Intel core2duo 6300 OC'D to 2.10mhz

Tested HDD with Crystaldiskinfo w/ HDD Smart Monitoring - no problem
Tested RAM with Windows built in RAM test (2 passes) -no problem

I have run:
Avast - boot scan, smart scan, full scan - all OK
SFC - OK
Disk Ck. -OK
Malwarebytes - OK
Reinstalled GeForce driver
Root Kit scan w/Spybot - OK
Defraged HDD
Crap Cleaner

The system WILL boot fine in "safe mode"

Most drivers are from "manufacturer" not just M$ generic

I have tried tracking down "error" info from "event viewer" not much help, did try a couple of "fixes" to no avail.

I am not opposed to "reinstalling" again but if there is a ... Read more

Answer:Will not boot past "welcome" screen

How did you get so many programs right after a clean install?
Did you install all Windows updates?
Spybot years ago was a great program. Haven't heard anything good about it in 5 years.
What is Key Scrambler?
The way to get most drivers when installing Windows 7 is let Windows 7 install the drivers and then check Device Manager for problems.

Check and see how much free space you have on your 80 gb drive.

Better yet read through this Tutorial by Greg. Their is lots of good information so take your time.

Clean Reinstall - Factory OEM Windows 7

9 more replies
Relevance 85.69%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

Answer:NO DESKTOP after booting up … & SYSTEM RESTORE "Incomplete" … & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Relevance 85.28%

Monday morning- Screen pops up saying my laptop wasn't shut down right. That it had to run a test to shut it down normal- Test took about 3hrs to complete.
After test I could get on like normal then once I shut it it shut down and didn't get back on till later that night only to find I CAN"T get past the  Black screen of death- the black screen with the "_" in top left corner. I've restarted it a lot to see if it would just turn on like normal with no luck. I CAN"T press F8 without having it beep at me I can only get into F2 and F12 and that is it. I know my battery is crap has been because it won't charge. I also Sunday night uploaded from malware bites web page a free download refreash virus protection again. Because somehow it went missing a few weeks before I did find that night I had to big viruses that I did get taken care of which were both trojans. I did get onto google.com a few times that night with having problems when trying to open the new window in a new tab- Fire Fox.- My mother also said her down stairs computer desk top was doing the same with google the day. So I'm wondering what is going on with everything. I've tried to get a email for tech support but no luck because they say that they don't do anything with my model number- which is only 2-3 yrs old. I've got a lot saved on the computer but can't get inside at all.
 
I need help getting something done I don't have any of the cds tha... Read more

Answer:Laptop 1545 won't start up past the Dell welcome page- Black screen with "_" blinking in top Left corner F8 won't work at all to restore or safe mode.

Hi Emilie2011,
Welcome to the Community, it could be an issue with the harddrive. I suggest you can start by running the Hardware diagnostics.
To run diagnostics press and hold down the "Fn" key (on the lower left hand bottom of the keyboard)  and turn on the system,it should ideally bring up screen showing Pre-Boot System Assessment.
Another way to run the diagnostics go to F12 screen,scroll down using the "up" and "down" arrow key,choose diagnostics  and press Enter.
If the diagnostics shows any error code/message please post it back.
Since your system is getting stuck on black screen with blinking cursor,you can also try to release flea power.
To release flea power disconnect the charger and remove the battery,press and hold down the power button for 30 seconds,reconnect the battery and charger.Turn on the system and see if it boots to Windows.
Hope this helps,
Thank You
Roshan.

7 more replies
Relevance 84.46%

My apologies if my is question is in the wrong group......I didn't really see any group that seemed appropriate. Here's what I'm looking for......

My computer runs Windows 7 Professional
My video card is NVIDIA GeForce GTX 260

I have 2 monitors, 1920 x 1080

The graphics display is configured so I can drag a window on to either monitor.
To get the wallpaper to show properly (not stretched or tiled) on both monitors, I had to create an image that is 3840 x 1080 pixels.

When the screensaver kicks in, IF in "photo" mode, it only uses the "main" monitor (where the taskbar and start menu are located). If the screen saver is in one of the other modes (3D text, Bubbles, etc), it automatically uses both monitors.

How can I get the screen saver to show photos on both display monitors?
On a similar computer with inferior hardware running XP Pro, the screen saver properly displays photos on both monitors.

Thanks in advance for any advice/suggestions offered. I appreciate your time.
 

Answer:I need help with Windows 7 configuration for "photos" screensaver

You may need to try downloading a screensaver program. Be careful if you take this route as screensaver programs are one of the most common ways of spreading virii
 

1 more replies
Relevance 84.46%

Not sure if I'm posting this in the right section. If I've put this in the wrong area, you have my apologies.

My laptop has had an immense amount of trouble booting over the past couple of weeks. I've google searched and tried every trick I could find to fix the problem, but things have only gotten worse. I've even tried posting the ordeal on another forum in the hopes that I could get some help, but I think it just annoyed people that I posted a wall text instead... so I'd like to start over in my attempts to troubleshoot this problem and hopefully get some help. I'm past the point of coming out of this unscathed, but I really want to avoid a system restore. I've foolishly put off backing up my stuff for the 8 months that I've owned my laptop, so only as a last resort would I prefer to do that.

Specs:

Acer Aspire 7741Z-4643
- intel pentium processor P6100 (2.0 Hz, 3MB L3 cache)
- intel HD graphics
- 3GB DDR3 Memory
- 250GB SATA hard drive
- Running on windows Windows 7 Home Premium 64-Bit Edition

Here's exactly what happens when I try to boot:

First it shows the Acer logo, then the blinking cursor (Where I can hit f8 for more options), then I get to a screen that tells me Windows can't start up. It recommends that I do startup repair, but starting windows normally is also an option. If I do that, it tells me that it's attempting repairs and pretty much nothing happens. It says that it may take over an hour, but I waited much, much longer than that to no ... Read more

Answer:Laptop Won't Boot, can't get past Initial Windows Screen

Update

I recently fiddled around in the recovery command prompt to see if I could get anything to change. I typed the following in the command prompt:

bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

I shut down after this. Upon restarting, I got a few different things. This time it started into the Windows Boot manager and directly told me that windows failed to start and that I should use the installation disk (Which I don't have) to repair.

The same happens when trying to boot in safe mode after waiting a minute or two. It gives a few details at the bottom:

File: \Windows\system32\config\system

Status: 0xc00000e9

Info: Windows failed to load because the system file registry file is missing, or corrupt.

I'm not sure if I made things better or worse here, but I'm glad to see it's not in an endless loop of startup repair anymore.

Going to try booting with my Windows Recovery usb again. Beforehand, any progress I made was hindered by the startup repair showing up before I could reach a command line. I'll report back with what I find (Hopefully someone is reading this. )

Edit: Nope, I ultimately get the same problem when trying this. This really sucks. I hope someone can help.

9 more replies
Relevance 84.05%

My machine was working fine. I had been on it for a couple hours just doing regular internet browsing. I tried to open a program (EverQuest 2) and it would open then immediately crash "EverQuest 2 has encountered an error". So I figured, reboot the machine. After the POST, it tells me to either launch start up repair or start normally. I chose start normally. It would go to the "starting windows" screen and the logo will not show up. it just stays there.

Powered down, and after the POST got the same options again. I picked start up repair this time. It would load the bar and show "loading windows files" or whatnot and when the bar would get completely full, it would freeze there.

My computer doesnt have a CD/DVD drive, I installed Windows 7 from USB. So I plugged the USB drive back into the computer and tried booting from that. It would go thru the "loading windows files" just fine, I can see the drive flashing as its being accessed. When the bar filled up, it would progress to "Starting Windows" screen, and stop blinking and just sit there... doing nothing. Tried using Safe Mode. Wouldn't load either.

I have not a clue what I should be looking for to even start getting it working again. The only physical change I've made to the system was plugging in another monitor to my graphic card. And even then, I've shut down and rebooted and it's been just fine.

Any help, advice, or a point in the right direction would be... Read more

Answer:Unable to load past "Starting Windows" no matter what method

Check your ram.
Memory Diagnostics Tool
Memtest86+ - Advanced Memory Diagnostic Tool

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
HD Diagnostic

4 more replies
Relevance 84.05%

Hello, I got a BSOD while playing a game last night. After restarting my computer and getting past the
"starting windows" screen I got a consistent BSOD immediately after; I am currently forced to use safe mode.

Some computer specs:
Video card: Nvidia GTX 460
OS: Windows 7
CPU: AMD Phenom II X4 820 Processor 2.80 GHz
RAM: 8 GB

Here's the BSOD info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8009634010
BCP2: FFFFF880073DF14C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Thinking it was a graphics card driver issue, I rolled back but still got a similar error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80092F1010
BCP2: FFFFF880073B2394
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I've attached logs of the dump files. I plan on putting in an older graphics card and seeing if I can get my computer to start, but I thought I'd post here first.

Answer:BSOD during game; can't get past "starting windows" anymore

You are correct in that the dumps are blaming your NVidia gfx drivers for the crash, first step would be to uninstall/reinstall the latest drivers using DDU or driver sweeper to clear out

If it still fails try the same again using an older version, if it still fails try your other gpu

Basically what you are doing/have already done

1 more replies
Relevance 84.05%

Ok well my computer when turned on gets to the screen that says

"windows closed unexpectedly"..etc and gives the options of

"safe mode"
"safe mode with netwroking"
"safe mode with command prompt"
"start windows normally"
"start windows with most recent working config" (or something similar)

Im sure most of you are familiar with this screen, when any of the options is selected
the computer begins to start up but then makes a struggling noise and returns to that screen
we can get past it.

If someone could help me out with this it would be greatly appreciated.

Dan

Answer:Computer wont boot past "start windows normally" please help

anyone?

5 more replies
Relevance 83.64%

My pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper, my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode. I am running win2000 on a pIII 933 mhz at 256mb ram w/ a cable modem. Can anyone help? TYVM.
 

Answer:not booting-blue screen, "boot device inaccesible"

Get the drive diagnostics for your hard drive model from the manufacturers web site and test that first. The constant beeping may also be a BIOS warning of either a boot sector virus or a thermal warning. Open the case and make sure all of the fans are running including the power supply fan.
 

1 more replies
Relevance 83.64%

Specs:
Vostro 1000
Windows XP

It has Broadcom PXE something, and every time I try to boot from CD ROM for my windows XP install it goes there and says "Media test failure" "Check cable" Then it goes to the windows loading screen, and it blue screens and says "Fatal System error" Blah blah, windows is shutting down.

I'm trying to reinstall windows, but it isn't working, NOTHING will load when I put it in my CD drive.

No Safe mode doesn't work, nothing on the black and white screen from pressing F8 works, at all.
 

Answer:"Fatal System Error" Blue Screen, not booting from XP CD

RAWQ said:


Specs:
Vostro 1000
Windows XP

It has Broadcom PXE something, and every time I try to boot from CD ROM for my windows XP install it goes there and says "Media test failure" "Check cable" Then it goes to the windows loading screen, and it blue screens and says "Fatal System error" Blah blah, windows is shutting down.

I'm trying to reinstall windows, but it isn't working, NOTHING will load when I put it in my CD drive.

No Safe mode doesn't work, nothing on the black and white screen from pressing F8 works, at all.Click to expand...
Broadcom PXE implies it's been trying to boot from a network so you need to go into BIOS to change the boot order to CD drive before you can get your reinstallation going. However, if it got all the way to trying the network boot option, chances are nothing else worked along the way. Restart and tap Delete or Function 2 for BIOS.
 

1 more replies
Relevance 83.64%

Windows 7 upgrade advisor reports that I have "BUFFALO TurboPC EX Series" on my Windows 7 PC. It won't let me upgrade until it is removed. I can't find it anywhere. Any ideas? I can't get past it.

I've tried to locate it using:
Revo Uninstaller
Glary Utilities
System Tray Cleaner
FreeFixer
System Explorer

But can't find it. It's not listed in my Task Manager, either.

FWIW, here's some info on the offending software:
BUFFALO TurboCopy - Should I Remove It?

and

What is UN091201.EXE?

Any ideas? I can't get past it. TIA!

Answer:Can't get past "BUFFALO TurboPC EX Series" on my Windows 7 PC

Pure speculation: in past Windows upgrades, the installer has detected a residual from a program that has been uninstalled.

The fix would be manually deleting Registry settings, but it'd be good to know exactly which ones.

1 more replies
Relevance 83.64%

This issue recently started happening to me, mainly after I attached a new HD monitor to my computer and updated my graphic drivers.

When I updated the drivers, I had two monitors connected, one via DVI (the one I was using before getting the new monitor) and the new HD monitor, which is connected via HDMI. Not sure if this is relevant, but just figured I'd mention it in case it's a possible cause.

The only way that I can boot is in Safe Mode... otherwise it just hangs on the Starting Windows screen with the Windows animation constantly glowing.

I have tried running start-up repair, but that seems to hang on the "Attempting to fix problems" screen, so I have to do a hard reboot each time. However, it was able to get past that a few times and say that the issues have been fixed and the only option it gave was to restart, so I did... but the same thing ends up happening. Computer hangs on Starting Windows.

I have also tried removing all display drivers in safe mode and any other software that I recently installed to see if they were causing any problems, but the issue still persists.

Additionally, I have tried running MSCONFIG and unchecked "Load startup items" under Selective Startup and disabled all non-Microsoft services, but no dice.

Booting to last known good configuration did not work as well.

I was able to efficiently use the new monitor just fine for a few days until this started happening.

Any ideas for a solution?

Here ar... Read more

Answer:Unable to get past "Starting Windows" during startup

I have these two images from the startup repair... maybe they can help. Sorry for terrible quality, but couldn't exactly copy/paste.

2 more replies
Relevance 83.64%

Urgent help needed please?
Hi built this system back in February / March this year and it has been running fine until a couple of weeks back whilst just viewing a web page and not even touching the mouse I suddenly got a BSOD now not sure if this is relevant but I had been on holiday for 2 weeks before and remember when powering down the day before it had a lot of updates to install before shutting down.
Unable to get it to boot although I did manage to get into safe mode once and did a system restore and it ran for 90 minutes before another BSOD so I thought I would do a fresh install but it only goes as far as
Press any key to load from DVD/CD then ?loading files? and then ?starting windows? and the BSOD again.

Now I have been around computers since the ZX81 days but have been unable to sort this problem, first I thought the mobo had gone down and change it to an Asus M5A99FX PRO R2.0 but still the same BSOD.
Changed out the SSD for a Samsung 840 EVO but still the same.
Now I have just tried an AMD Phenom II x4 965 but still the same.
I have also pressed the memory check button on the mobo and all ok, I have also changed the sata cables.
I have removed 2 of the graphics cards so now only running on one (I have also tried each of the others).
Thinking it was virus as if I left it after the ?press any key to load? It came up with bootmgr missing which is why I fitted a new SSD.
Now I am sure everything is set ok in the bios but I may have missed something obvious... Read more

Answer:Unable to get past "Starting Windows" after BSOD

Quote:
STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,







Quote:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS


So it may be memory (RAM) or any driver/software.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Boot to System Recovery Options . Try Safe Mode with Command Prompt. In the command prompt .... enter the command ....

start msconfig

It will open the system configuration window, with the "general" tab selected.
Click the "startup" tab. Click "Disable all" > Apply > OK.
Click on "services" tab. Check the "Hide all Microsoft Services"; Click "Disable all" > Apply > OK
Then try to boot again normally. Is it failing still?

If so, boot to System Recovery Options once again. Try Enable Boot Logging. It will create a file n... Read more

1 more replies
Relevance 83.64%

My laptop froze after entering a wrong product key. I then pressed the shut down button till my computer went off. I restarted the computer and chose the "start windows normally" option. The laptop boots to "setup is preparing for first use" screen. It lasts for about 1 minute and then the computer restarts automatically following the same processes.

Answer:Windows 7 does not boot past "setup is preparing..."

Please do not double post... stick with your original thread...

3 more replies
Relevance 83.64%

8gb 1600mhz ram
R9 290
I7 4770k
Z97A mobo
1tb hdd ( only storage device used )
120gb ssd (this has already died as far as I know but haven't gotten around to removing it)

Other information, just ask if you need it.

No context on why this happened, I just woke up this morning and my PC wouldnt fully boot.

My PC disk drive hasn't worked for about a year now, but I have Win 7 install on a flash drive, however I also can't seem to do this as booting from the flash drive results in a black screen.

Any help appreciated as I really don't wanna have to get another computer for Christmas!
 

Answer:PC won't boot properly, can't get past "starting Windows"

Hi, have you tried Safe Mode - tap F8 as your system is starting up?
Then click.
Start > Run > Type
msconfig
Click Launch System restore.

Then choose a date prior to the problem.
======
Or Safe Mode with a Command Prompt Option.
Select an operating system if asked.
Press Enter.
Log on as an administrator.
At the command prompt.
Type

%systemroot%\system32\restore\rstrui.exe

Press Enter.
You should now be in System Restore.
Choose a date prior to the problem.
======
System recovery options Win 7.
http://windows.microsoft.com/en-gb/...ns#what-are-system-recovery-options=windows-7
 

3 more replies
Relevance 83.64%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 83.64%

When I turned on my computer today, it was going through it's normal processes, although it "stuck" on the screen that says "Platinum".

I built my computer. It has:
MSI K8N NEO motherboard
AMD 64 3200+
6600 GT

Does anyone have an idea of what's wrong? Thanks.

Answer:Computer not booting: stuck on "Platinum Screen"

platinum screen?

is it a heat issue? (check if the heatsink is properly seated/has goo)

9 more replies
Relevance 83.64%

Whenever I restart my computer, after I log on and my desktop displays, I immediately get a green screen that says "Please Wait" and lasts for about 10 seconds.

It doesn't seem to affect my computer, but it is slightly annoying. Here is a screenshot of what is happening.

I'm running Windows 8.1 64-bit

Answer:Green "Please Wait" screen appears when booting

When did the problem start? Have you scanned for malware? What if you click Cancel?

If this only happens at boot, you need to look at what starts with Windows. Autoruns will tell you more than you need to know - but you might first try WinPatrol - free, but the Pro version is well worth it, IMO.

12 more replies
Relevance 83.23%

Hey guys, kinda new here, hopefully I'm posting this in the right forum section.

I'm not that super oriented with computers, I'll give it my best shot to explain what's going on here.

In short my PC just won't start. The light turns on, it boots up, and then I get a black screen with text referring to either "Start Up Repair (recommended)"

or

"Start windows normally"

If I choose start windows normally, it brings me to the black booting screen with the windows flag, then it proceeds to go back and restart the system, going back to the black screen. OR More likely it just stays stuck on the glowing windows flag.

This also occurs if I press F8 and go into safe mode. After listing all the components before going into safe mode, it simply restarts itself and goes right back to the black screen of the two choices.

If I select Start up repair, a grey loading bar appears below that on occasion freezes. If I manually reset the computer try it again, I get to a blue windows default background screen and the message

"Startup Repair
Your computer was unable to start
Startup repair is checking your system for problems...

If problems are found, Startup Repair will fix them automatically. Your computer might restart several times during this process.
No changes will be made to your personal files or information. This might take several minutes.

Searching for problems.. (this is beneath a blue bar that has been going on for at least... Read more

Answer:Windows 7 won't boot past "Starting Windows" possible hard drive issue

12 more replies
Relevance 83.23%

Trying to fix my friend's laptop. She claims she was watching a youtube video and all of th sudden the computer started acting up and so she rebooted the computer and now it won't boot past the xp logon scren. Comes up with the error: "data execution prevention; userini logon application" with the only option of close message. windows does not contiue to boot and just sits there. I have tried to boot into safe mode but it only gives the option of booting into normal xp media center. tried last known good config and same results. any ideas?

acer aspire 3050-1594
AMD Sempron 3400+
xp media center
 

More replies
Relevance 82.82%

The title pretty much says it all with respect to what's happening right now. When I first started trying to install Win 7, I got a blue screen telling me to disable caching of memory in a few different devices, so I went into CMOS setup and disabled anything I could find related to memory cache. Well, this did away with the blue screen, but then I got another screen offering to check the system memory, which I did. Afterward, it came up to the Starting Windows screen, where the four blobs swirl around and then form the Windows logo -- and from that point nothing more occurred. Rebooted and this time there was no screen offering to check memory again. It just went straight to the logo and stopped. Most recently, I went back and re-enabled all the cache settings that I'd disabled. No more blue screen, but the machine continues to stop at the same point.

Now a bit about the machine. It gets kinda complicated and I'll try to be clear. During the open test period last year, I installed the x86 7100 build on the machine and everything went fine, except for finding drivers for a couple of old peripherals (a SCSI controller and an old sound card). My entire reason for installing it was to see if Win 7 lived up to MS's claims that it would run well on older hardware. That motherboard and processor was 2001 vintage and was running 768mb of RAM. It was perfectly adequate for years as an XP platform, and I wanted to see how it handled Win 7. As it turned out, it did fine... Read more

Answer:Win7 32 bit won't get past "Starting Windows"

Wipe your HD of incompatible old-school Parted Magic formatting following this tutorial: SSD / HDD : Optimize for Windows Reinstallation

The Win7 partition manager which works best when installer or Disk Mgmt can't is free Partition Wizard bootable CD.

Either format using installer if you want 100mb SysReserved boot partition (which places Repair console on F8 Advanced boot tools menu) or use DISKPART formatting steps in tutorial's second phase.

Clear your CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Set the SATA controller setting to AHCI to start, then IDE if necessary.

Test your RAM with memtest86 for 5-6 passes, then HD maker's full diag/repair CD scan: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

9 more replies
Relevance 82.82%

Hi

I have recently tried to disinfect a computer of various malware/spyware issues. But now I think my motherboard has had it. Its either infected with something or was a coincidence that it packed up when it did.

When I boot up the computer, it goes as far as the "Loading Windows XP" and then beeps once and goes back to trying to boot up again. It then displays the option to start in safe mode (with/without network support, Last known good configuration or Start normally). It then counts down from 30 and reboots itself

My mouse and keyboard no longer work

I have tried to swap the hard drive for one that I know works, in case the hard drive was knackered, but get the same result

Am I right in thinking that my motherboard has had it?
 

Answer:Computer won't go past "Loading Windows XP"

Did you try in safe mode and Last known good configuration ???
 

12 more replies
Relevance 82.82%

Hey Everyone,

I was trying to do a clean install on a Dell Inspiron 545MT (with a samsung hd642jj drive) and initially formatted the system partition (NOT the recovery partition) and then tried to do a fresh install.

Now, everything goes smoothly, all files are copied properly and everything.

After all the setup goes correctly, you should technically see image 17 (please ref to link):
Windows 7 Install Guide Page 4

The inspiron does all the installation steps perfectly fine up until image 16, and after it says "Starting Windows" the screen goes blank and the computer just ... sort of ... stays idle and nothing goes beyond that!

I've done a hardware diagnostics test and the hard drive passed all the tests, and I've tried installation with 2 different installation discs, but to no avail.

The only solution I thought of was to purchase another hard drive (and sorry, is that Samsung a SATA II or a SATA I? I don't know!) and then try installing it there.

I know the Windows files are installed properly (checked with Ubuntu), but for some reason, Windows 7 will just not boot!

PLEASE help me with alternative solutions!

Thank you so much!

PS I know some posts have complained about USB devices and video cards,
for reference, the system has a ATI Radeon HD 4350, and the only USB devices that are on the computer are the keyboard and mouse.

Answer:Can't get past "Preparing Windows for First time Use"

Clean Install Windows 7

Use our tutorial you might get better results. Check it out compared to what you have done so far.

Hope it helps
Mike

7 more replies
Relevance 82.82%

Hello,
callout for help with new build

See this post for intel and rig specs,and also the error messages;
http://www.bjorn3d.com/forum/showthread.php?t=24103

no replies as yet...and sorry to take up time from others problems.
Since Friday, I can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.

Loads all drivers up to that point,then the error in above post.

Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.
S prompt is no joy also.

Tried F8 for Safe Boot and no joy.
Cleared CMOS several times.

All drives are there in CMOS.
All RAM (4 Gigs) is detected
I raised Memory voltage to 1.9 volts (standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).
Put timings to standard 7-7-7-24T
Tried Memory linked/unlinked/Auto/1T/2T
I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM etc...
I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
A friend said check cables and connections (I did ),but if they were bad the drives wouldn't show in CMOS and monitor would be blank if GPU was bad.
My board is capable of 2000 Mhz FSB if that helps.

Matter of fact,I have tried everything possible that I have come across on these forums and on the web.

I even put the XP Pro and the XFX disc into both DVD drives at the same time.
no joy.

I got a wee bit furt... Read more

Answer:XP Pro won't get past "Setup is starting Windows"

8 more replies
Relevance 82.82%

I am having issues with my laptop...it is a HP and I have Windows XP. Basically, when I turn it on everything goes smoothly until it gets to the ?windows is starting up?? page. It freezes there every time and I have pressed every button and combination of buttons on my keyboard and I cannot get past this page.Help?

Answer:I can't get past the "windows is starting up..." page.

Some details about the laptop and what happened prior to this could prove helpful. 

1 more replies
Relevance 82.82%

I have a Dell Inspiron 1545
2.1GHz Intel Pentium Dual Core T4300 Processor
4GB Memory
250GB Hard Drive, DVD±R/RW Optical Drive
15.6" Display, Integrated Intel 4500 MHD Media Accelerator Graphics
Genuine Windows 7 Home Premium (64-bit)

It stalls at "Starting WIndows" waits there for a few seconds, then flashes a blue screen for abou a second, and then reboots. If I attempt to launch Startup Repair, it displays the "Windows is Loading Files" screen, the goes to the windows 7 splash screen, you know the blue background you have at the logon screen, I can freely move the cursor, but nothing happens after that. no window appears, or anything. Also, you can hear the harddrive stop working once i get to that screen.

When i put in my OS disk (tested working on 2 different computers) it stalls at "Setup is Starting"

Ive tried reverting bios to default settings, didnt solve the problem.
Any help is greatly appreciated
 

Answer:Laptop will not go past "Starting Windows"

The hard drive is probably corrupt or bad
 

1 more replies
Relevance 82.82%

Hey guys,

Pulling my hair out with this one, so figured I'd post here to see if anyone has any suggestions.

First, my setup:
Mobo: Asus A8R-MVP (BIOS 0503, last stable release)
Video: nVidia GeForce GT220
RAM: 3 GB DDR2
Main HD: 160GB IDE, with 3 partitions: [XP on #1 (20GB), Windows 7 aimed for #2 (50GB), and free space for the rest]
Other HDs: 2 x 1TB RAID1 (general storage)

If I launch the setup from a DVD, it gets past "Windows is loading files", then immediately freezes at "Starting Windows" (right before any of the coloured balloons show up...in fact, it hangs the instant the first orange pixel is displayed).

So, I tried launching the setup from Windows XP. Pointed it to the proper partition, it extracts the files, reboots, and the exact same thing happens. Can't get past the first orange pixel.

For both cases, I've tried pressing F8 on boot and selecting "safe mode" or "low resolution mode", but no dice. Safe mode seems to always get stuck on disk.sys, for what it's worth, but I understand that could even mean it's hanging on whatever the next driver is.

Other things I've tried:
-replaced nVidia video card with ATI x850, no difference
-removed all sticks of RAM except one, no difference
-removed all unused peripheral devices, no difference
-disabled all unused on-board devices, no difference

If anyone has any ideas or suggestions, I'm all ears. I've installed Windows 7 successfully so many times on different hardware... Read more

Answer:Can't get installation past "Starting Windows"

Can you try using only 1GB (RAM) memory stick during installation, you can bring them back after the windows is installed.

9 more replies
Relevance 82.82%

So I was playing games on my computer, and one of my applications wasn't working so I decided, let me restart my computer, and when I did, I typed in my password and everything and it just sat there saying "welcome" until I had enough. I looked on this site and tried everything I could understand, but still it mocks me. I restored my computer with the windows 7 disc (to three days ago). I unplugged it and took out the battery in the motherboard and all that. I looked through the BIOS settings and can't seem to get it. I'll take any advice you can offer. Thanks.

More replies
Relevance 82.82%

I have W7 Home Premium and my PC started acting strange this morning.

It would not get past the Windows "welcome" screen after I entered my password.

I had to power off using the power button and after a few attempts it got past the "welcome" screen.

But after a restart the same problems occur.

This is my only PC so would like to get this fixed if I can.

I have not added any software recently, only windows updates.

The last piece of hardware installed were game joysticks which I plug in and out as required.

And a USB powered hub which again has nothing plugged in at the moment.

Any help appreciated.

Regards

Simon

Answer:W7 Not Getting Past "Welcome" Screen

You could try a System Restore at boot. See OPTION TWO in this Tutorial - This can be handy if you cannot startup Windows 7:

System Restore

Read the Information, Note and Warning texts so you know how this works.

4 more replies
Relevance 81.59%

Hello there

So I'm experiencing strange BitLocker behaviour. I have this PC at work. Clean Windows 8 x64 installation, 3 HDD (AHCI), no SSD.

After I set up BitLocker to encrypt "C" partition, it gave me pop-up window, that I should restart PC to test the BitLocker loader. So I clicked Yes. And after few seconds I got this:

JPG IMAGE - http://www.eightforums.com/attachments/f1/f2/22871d1370880908t-very-strange-bitlocker-enter-password-startup-screen-5jkippr.jpg

Mind, I'm still ABLE TO type password (i can't see sh** though), after I hit enter Windows IS booting, but it's really weird to see above picture instead of:


My GFX is OK, I tested it with games, benchmarks etc.
BitLocker simply cannot, for whatever reason, use my video card properly and displays those weird lines. After all - it hasn't loaded the whole Windows yet. Than again, it IS a bit strange, as Windows installers tend to work fine.


Any thoughts people?

Kind Regards

Bart

More replies
Relevance 81.18%

I can't use my other laptop as I can't get past the Welcome screen. I have looked at a lot of solutions on Forum, but all seem to be useless in my case. Most are like "If your car won't start, drive it to the repair shop". I can't download, reinstall Windows, or do anything because I can't get past Welcome. Any ideas?

Answer:windows 7 will not proceed past "welcome"

Welcome to the Seven Forums.

Can you boot to the safe mode?
Tapping F8 during a reboot should get you there.

9 more replies
Relevance 81.18%

i have a hp pavilion... the last time i turned it off all was fine! when i tried to start it back up a few days later it gets as far as the screen that says welcome windows is starting up! then it stops. the screen does not go black or blank it just sets there, i would think it was frozen but the cursor will move. oh and i tried to start it in safe mode and that works! so what is the problem windows wil load in safe mode but not in normal!!!! HELP ME PLEASE!!!!!!!!!!!!!!!!!!!
 

More replies
Relevance 81.18%

I am starting up my granddaughter's computer whose hdd has been formatted. A fresh version of Window 7 has been put on the computer and I am trying to create the initial image on an external hdd and perform a backup. Both of these pop-up screens are too large vertically to access the "next" button. I can grab the header bar and drag the window up far enough to see that the buttons exist, but when I release the popup window, it "snaps" down out of sight each time.

Please supply a remedy for this program behavior.

Answer:Initial image and backup screens too large to access the "next" button

Try changing the screen resolution. Just remember the old resolution settings.
Right click on a empty spot on the desktop and select Screen Resolution.

4 more replies
Relevance 80.77%

Hello, My PC has been crashing because of those two processes. A couple of months ago i installed a child control program that mainly controlled IE, i was dissatisfied by it and uninstalled it, now i discovered that it left two files in my SYSTEM32 folder: webtmr.exe & wintmr.exe, this two files are undeletable because they will appear again upon the next boot, they are also making my IE to crash [when i close it], which it also makes my PC hang.

so far spyware doctor hasnt been able to find it neither my karpesky AV.
 

More replies
Relevance 80.77%

Hi, TS Guys.

I'm back with a new problem. I'm getting these "memory could not be read" error messages when starting up, with "kxvo.exe" and "ll.exe" in the headers (2 separate message boxes, although the "ll.exe" one didn't pop up anymore after I scanned for spyware using SAS).

Here's the HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:20:37, on 03/17/08
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\F-Secure\BackWeb\7681197\Program\SERVIC~1.EXE
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\F-Secure\Anti-Virus\fsgk32st.exe
C:\Program Files\F-Secure\BackWeb\7681197\program\fsbwsys.exe
C:\Program Files\F-Secure\Anti-Virus\FSGK32.EXE
C:\Program Files\F-Secure\Common\FSMA32.EXE
C:\Program Files\F-Secure\Anti-Virus\fssm32.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\F-Secure\Common\FSMB32.EXE
C:\Program Files\Seagate\Sync\SeaSyncServices.exe
C:\Program F... Read more

Answer:Solved: Getting "kxvo.exe" and "ll.exe" errors when booting-up

15 more replies
Relevance 80.77%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 80.36%

I read all the responses to the exact question as mine as well as similar questions, none are applicable, as not even Safe Mode will load past black screen with "Safe Mode" in each corner, and at the top "Microsoft (R) Windows (R) (Build 7601:Service
Pack 1)". Thankfully, i had just recently backed up most of my files!  I want to get it working so I can wipe it clean and get rid of it. Please help, thanks!

More replies
Relevance 80.36%

I am running Windows 8 64 bit

Apparently I scanned my system using full system scan (AVAST) and left my computer on thinking it would take for many hours. When I came back, my computer automatically shutdown because it was left standby for about 4 hours. I don't know if the scan was finished. When I try to boot, the screen gets stuck on "please wait" screen or "configuring windows. Do not turn off your computer".

I already tried going to System Recovery Options screen, then going to Troubleshoot, then Advanced Options, but I tried everything there and still the issue persists even when I tried to boot in safe mode. I tried going to command prompt, and type sfc/ scannow but it says it can't scan right now. I also tried chkdsk / R but it says the same. I don't know how to run cmd as administrator from the System Recovery Options.

So now I tried to use system restore but I am stuck to the windows logo for about 1 and half hour. I don't know if I should wait for this or it is already stuck. In other forums I read, they used system restore with only the "C:" disk group connected. Should I also do this?

I am thinking to remove AVAST or somehow disable it.

Please help me.

Answer:[SOLVED] Stuck on "Please wait" screen or "Configuring windows. Do not turn off your

Hi and Welcome to TSF!

Do you have your Windows 8 CD?

19 more replies
Relevance 79.95%

It starts booting with the "Dell" logo screen, the progress bar reaches 3/4 of the way, then starts over. There is the F2 Setup and F12 Boot menu options, but it reboots because it doesn't give time for those options to open. Any ideas?

Answer:My Dell Inspiron 5160 will not go past the "Dell" Screen

What led up to this (new hw, sw, virus, error, etc)?

5 more replies
Relevance 79.95%

When i start my windows xp, i can hear the bells, then it sits for a minute, and the curser turns to an hour glass arrow, and the sound "icon" in the task bar disappears. I can not hear any sound, and any attempt to use something with sound locks the task bar or other funky stuff.

I have tried to see if there was something running at start up that might cause it to stall, but I cant see anything.

I have uninstalled and reinstalled my soundmax drivers- updated drivers from the internet etc. same thing each time. when it starts, i hear the sound, then nothing after that.

The only thing i can think that was different, i tried a program for splitting mp3's and i uninstalled it- other wise the only other thing was an auto update from windows that ran.

Any ideas? I am attaching a pic of the processess running. maybe that will give someone a clue.

 

More replies
Relevance 79.13%

I'm trying to fix my brother's computer after he opened a trojan attached to an email. The email was the one saying your credit card had been charged for airline tickets.

The computer is a Dell Dimension 3100 running Windows XP SP2.

The first problem is that after normal login there is a blue screen with a yellow window in the window with the message

"Warning! Spyware detected on your computer! Install an antivirus or spyware remover to clean your computer."

There are no icons visible. The only action I can perform is CTL-ALT-DEL to bring up the Windows Task Manager. I told my brother to start in Safe Mode from which he scanned the computer using AVG Free Edition which was installed before the infection. This did not fix the problem.

Starting Safe Mode I now get a black screen with Safe Mode in the corners and the operating system name at top. The blue login screen then comes up with Administrator and my brothers account. I click on Administrator and I get the same black screen as before with Safe Mode in the corners and the writing at top. My brothers account does the same. There are no icons or Start button visible.

Again, the only program I can bring up is the Windows Task Manager. Using that, I managed to install and run SmitfraudFix which was given as a solution to "Spyware detected" screen. After rebooting this did not fix the problem. I also installed SpyHunter 3.5.11 which found Zlob.Trojan, Rogue.AntivirusXP 2008 plus some other ... Read more

Answer:Safe Mode "Black Screen" and "Spyware detected" screen

Anyone want to answer this?

1 more replies
Relevance 79.13%

"";"C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI";"Object is white-listed (critical/system file that should not be removed)"

There are a lot of other trojan horse walkthroughs, if someone can point in the right direction more specific to my horse droppings... :cry

Brand new computer... and AV wasnt the first thing to get downloaded... doh!
 

Answer:C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object is

Re: C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object i

Welcome to MajorGeeks, thernbear

Delete items using RogueKiller.

Double-click RogueKiller.exe to run. (Vista/7 right-click and select Run as Administrator)
When it opens, press the Scan button
Now press the Delete button.
When it is finished, there will be a log on your desktop called: RKreport[3].txt
Attach RKreport[3].txt to your next message. (How to attach)

__

- Rescan with HitmanPro, when it finds services.exe - Virus, allow it to Replace by clicking the down arrow next to the detection and choosing Replace.
If Desktop.ini - Trojan if detected again, you can allow HitmanPro to Delete this but Ignore any other detections from the time being.
Afterwards, click the Next button.
HitmanPro may want to reboot the PC in order for the changes to take affect, please do so.

__

Once you are back in Windows, run another scan with HitmanPro and then attach the latest hitmanpro.zip log. (How to attach)

__

Completely delete these two folders manually using Windows Explorer:
c:\windows\installer\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}
c:\users\#2\appdata\local\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}

Let me know if you were successful or not.
 

3 more replies
Relevance 79.13%

Hello,

To start, I've spent two days scouring the internet for help with this and none of the threads have produced any working results. Only once before has a software issue stumped me, so I'm at my wit's end here .

Computer Stats: 2009 Macbook Pro running Windows 7 Ultimate x32 via boot camp, all drivers up to date as of last night, no non-factory parts or tampering with any system files.

Issue: Around a month ago, I noticed my laptop freeze up whenever I left it unattended for more than half an hour. Sometimes it would lag for 30 seconds or so and then be fine, sometimes I would have to reboot entirely. This happened again two days ago and upon rebooting it became stuck during the animation at the "windows loading" screen. I restarted and used F8 to pull up the advanced boot menu, chose "system repair", and it went through two loading screens before presenting a black screen of death that never seems to change. Booting in safe mode works, which I've used to scour the internet for fixes and ways to get incredibly drunk.

Attempted Fixes: A full system virus scan (duration: 13 hours) with Kaspersky, Malware Bytes, and Panda. Nothing was returned save a few false-positives from torrents (only trusted trackers, nothing dodgy file-wise). Used the "repair my computer" option at F8'd start-up multiple times to no avail. Used "sfc/scannow" twice, which downloaded some windows updates but didn't fix anything. Yelled really loudly at com... Read more

Answer:Booting hangs infinitely at "windows loading", caused by driver?

TAKE THAT HARDDISK ON A ANOTHER COMPUTER? FORMAT HIM, and try to load again; only with your cd-rom - HDD - Graka, but why X86 ? witch MB did't you have, how many memory ( max 4 GB - Windows used 3.2 = 3 GB> Bios set just default, Good luck, regards from Antwerp > Belgium > Europe

1 more replies
Relevance 79.13%

Howdy everybody!
When I hit the Windows & Print Screen keys, it is supposed to generate a picture of my Desktop into a Folder, within Pictures, labelled “Screenshots.”
But there is no such "ScreenShots" folder there!
What should I do? If I simply create a new folder, and label it “Screenshots,” will do that do the trick?  Or is there a more complicated fix?
Your help would be appreciated. Thanks!

More replies
Relevance 78.72%

I have searched the forums for the last 2 days but have not found a solution to the problem so here goes.

2 days ago my Windows 7 x64 Home premium system worked fine. I woke up the next morning and It would not load past the "Starting Windows" screen.

I have a stock ASUS Essentio series computer with 8 Gigs of ram a 320Gb Western Digital Hard drive and a 6 core intel processor.

I have tried so far:

I have removed the hard drive and replaced it with an older windows vista x64 drive I have. The Windows Vista drive booted right up with no problem.

I have Booted the computer with the Vista drive as the OS drive and the Windows 7 drive as a secondary hard drive. When I did that the Windows 7 drive showed up, all the files were there but the problem was I could not access any of the files under my user folder. (access permission or something) But it seems that this would show the hard drive is not fried.

I have tried restoring the drive to an earlier restore point but each restore point I try it says that it can not restore.

I have tried the windows repair option and that freezes on "Loading windows files"

I have even tried going into the bios and booting under different drive settings. Nothing.

By looking through this forum It appears that there is something wrong with my Windows 7 drive booting drivers maybe. Or possibly a system update that went wrong overnight and now the OS wont boot up. (or something else I could be completely wrong)
Any hel... Read more

Answer:Windows 7 will not load past "Starting Windows"

Have you tried running a Disk Check on the Windows 7 drive with both boxes checked using the Vista system (I assume this is what you mean by an old Vista drive)?

It may be safer to do it through the Windows 7 Recovery Environment (RE), though. I am fairly sure Vista and 7 use the same file system, but just to be safe, better to use the RE.Use Advanced Boot Options to select Repair Your Computer and get to the System Recovery Options. Then select the command prompt. Do the following:chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:.etc until you get the message that the volume could not be opened for direct access. For any drives that do not give the message:
Windows has checked the file system and found no problems
run chkdsk again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

I realize you may only have one disk show up in Windows explorer, but you may have more than one disk through recovery options. This is because the system creates a hidden boot partition (which will be C: in recovery), you may have a recovery partition for your PC that is hidden (which will be D: in recovery), and you will have your primary Windows partition (which may be E: in recovery). A custom PC will likely have at least C: and D: to scan.

1 more replies
Relevance 78.72%

Hello all,

I have a Windows 7 Ultimate 32-bit that works perfectly except something. When it starts up, the past Windows logo "Starting Windows" does not appear instead the "Microsoft Corporation" logo appears. How can I fix this problem so that the Windows shows the previous "Starting windows" logo when starting?

Answer:The past Windows logo "Starting Windows" does not appear

This thread may be of help

3 more replies
Relevance 78.72%

I have a laptop without floppy and no CD-ROM drive. It used to run Windows 98 but is compatible to run Windows 2000 as well. After formatting the hard drive I wanted to install Windows 2000 so since I didn't have a CD-ROM drive I popped the HD into my other laptop and installed Windows 2000 successfully. However, when I put it back into my intended laptop I got the error message "NTLDR is Missing" - Press any key to reboot.

What does that mean? HOW DO I FIX IT?

How come it can boot on one laptop but not the other?

Thanks!
 

More replies
Relevance 78.31%

I have a brand new Inspiron 3847 desktop that is stuck at a "Just a moment..." Step. I have shut it down after about an hour of the dots forming a circle, turned it back on, and it is still there. HELP!!!!

Answer:Stuck during initial set up at "Just a moment...."

Same here , what can I do?

1 more replies