Computer Support Forum

Random BSOD wdf0100

Question: Random BSOD wdf0100

Last couple of months i've been getting a bunch of performance issues/blue screen/fps drops/loss of internet when it shouldn't happen. A bunch of times i'm getting DRIVER_IRQL_NOT_LESS_OR_EQUAL remarks aswell. i'll upload the logs here and i really hope someone would be able to help me here .. What i've done so far is 2 sfc scans and a memory diagnostic test from windows. the first scan came out clear, i restarted my computer did the ram test and was clear aswell. the second sfc scan aswell clear. so i got no clue what could be causing this ..

More replies
Relevance 100%
Preferred Solution: Random BSOD wdf0100

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 69.7%

Walked in today with a BSOD. Has a page fault in wdf0100.sys. I have restarted a couple of times, either in safe mode or safe mode with networking, and sometimes it would restart by itself, sometimes it would give the same BSOD. A quick hardware check and nothing seems amiss. This computer is my shipping computer, so not much else on it but Worldship. I attached the dump file, please let me know what I can do

More replies
Relevance 68.88%

I've deployed a new Win 7 x64 OS and installed all updates. Now I am receiving BSOD with references to wdf01000.sys and DRIVER_IRQL_NOT_LESS_OR_EQUAL remarks. Attached is a zip file with two memdumps. Any suggestions on resolving this would be appreciated.

Answer:BSOD - wdf0100.sys error

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

5 more replies
Relevance 68.88%

so i have a custom PC with a clean install of Windows 8.1 if the computer sits for anything over 10 min with no power, when i turn it back on it will BSOD a few times and then work perfectly, but lately its been freezing a lot too. Any Ideas on what could be wrong, any help will be greatly appreciated!

? OS - Windows 8.1
? x86 (32-bit) or x64 x64
? What was original installed OS on system? Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer) Retail
? Age of system (hardware) less than a month
? Age of OS installation - have you re-installed the OS? 2 weeks with a re installed os, but re installed to see if it would stop BSOD

? CPU AMD FX 8350
? Video Card - MSI Twin Frozor Gaming GEFORCE GTX 760 OC edition
? MotherBoard - MSI 970a-G46
? Power Supply - brand & wattage Ultra 750W

? System Manufacturer - Custom PC

Answer:BSOD from wdf0100.sys and ntosrnl.exe

Hi,

We have many different bug checks:

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

This indicates that a system thread generated an exception which the error handler did not catch.

BugCheck 1000007E, {ffffffffc000001d, fffff8000020af33, ffffd00020762fb8, ffffd000207627c0}

The 1st parameter of the bug check is 0xc000001d which indicates that an attempt was made to execute an illegal instruction.

4: kd> .exr 0xffffd00020762fb8
ExceptionAddress: fffff8000020af33 (Wdf01000!FxObject::DeleteObject+0x0000000000000123)
ExceptionCode: c000001d (Illegal instruction)

^^ - Wdf01000.sys > WDF Dynamic - Kernel Mode Driver Framework Runtime. The DeleteObject function deletes a logical pen, brush, font, bitmap, region, or palette, freeing all system resources associated with the object. After the object is deleted, the specified handle is no longer valid.

IRQL_NOT_LESS_OR_EQUAL (a)

This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.

This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high. The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.

KERNEL_SECURITY_CHECK_FAILURE (139)

This bug check indicates that the kernel has detected the corruption of a critical data structure.

BugCheck 139, {3, ffffd00020daeeb0, ffffd00020daee08, 0}

The 1st parameter of the bugcheck is 3 which indicat... Read more

2 more replies
Relevance 51.66%

I need help, I get this message when setting up Windows XP Pro SP2. I have formatted this hard drive because of this problem but it still exists now. The full error message is
caused by cdfs.sys page_fault_in_nonpaged_area

Technical STOP ERROR 0X00000050 (0XE112FF3F, 0X00000001, 0XF75E1599, 0X00000001) CDFS.SYS - Address F75E1599 base at F75D7000 date stamp 41107eb1
MPC Transport T2500 originally running Vista
I appreciate all the help..

Answer:Stop error 0x00000050 - cdfs.sys - wdf0100.sys [moved from XP]

from techspot:

Quote:




You may have the haxdoor virus. A 00000050 with an event Id 1003 is a symptom.




although you did perform a format....

can you let us know what the temps and voltages reported in your bios are?

12 more replies
Relevance 48.79%

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 ffff... Read more

Answer:Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility... Read more

9 more replies
Relevance 47.15%

Hello
Ok now i'm out of solution so i come here hoping that someone could help me
I always had bsod hapening randomly but not like the this week
I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa
I read a lot of forum like this one of people having similar problem and most of the time people were talking about testing the ram so I ran mdsched.exe last night but no error has been found
They also talk about using the windows debuging tool so I tried to download it but even the debuger downloader is buged!

So if someone could help me find out what's the problem that would be great

ps: No need to ask i already uploaded the minidumps of the this week here: https://www.dropbox.com/s/57a0dv8l7x...mp%20files.rar

Answer:Random BSOD with random error code at random moment

Welcome to SF mandrac , please follow the Blue Screen of Death (BSOD) Posting Instructions.

And testing the RAM using WMD is no longer the recommended way going about doing so.
Testing the RAM:








  
Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+


   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.




When done with the testing procedure take a picture and upload it here.

7 more replies
Relevance 45.1%

i just buy a decent gaming pc with the prices about 600 $

processor : fx-6300 six core
graphics card : gtx geforce 650 ti
ram : 8 gb
anti virus : eset nod antivirus 32

i buy the pc without hardisk,since i want to use my old hardisk.
since the first day i buy the game a bsod apeared,but cuz i have little time
i never go to the shop again.until i think after about 5 month the pc can't
boot and always stuck on the startup with black screen and no cursor.
before that happend the pc always got bsod or sometime just a blank screen with random color,the bsod is always random,sometimes it say bad_pool_header or irql_not_less_or_equal or something like that.so i bring the pc to the shop,it say that my hardisk and graphic cards is broken,so i change the gpu to nvidia geforce gt 740 and buy a new hardisk.

and so i re install windows and buy a new casing,the bsod appear again with bad_pool_header.i was desparate since am not computer expert so i don't know what else to do and the shop where i buy is just a dead end since they don't really know what's wrong.so i browse the internet,run memtest,downloading the blue screen viewer,and i suprise that i got so many bsod with the same driver error,ntoskrnl.exe . so i browse the internet searching how to fix ntoskrnl.exe bsod. but i don't have time to do all of the method.

oh and all the bsod i got according from bsod viewer :
bad_pool_header
irql_not_less_or_equal
Memory_Managment
Page_Fault_in_Nonpaged_Area
KMODE_EXCEP... Read more

Answer:BSOD On Random Times with Random Bsod ntoskrnl.exe

got another bsod when playing gta 4 with a meassage bad_pool_header

1 more replies
Relevance 43.87%

I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into windows in 8-10 seconds (SSD) but the latest post-BSOD boot took about five minutes from typing my password into the login screen to where my desktop popped up. A subsequent reboot was at normal speed. The memory dumps always include the NT OS kernel, but then also some other driver (different each time), which I suspect just happens to be the one trying to run at the time of the error.

Things I've tested:
Temperatures (didn't really suspect them in the first place, but I'm running cool)
Memory (Both the native Windows test and memtest found no issues)
Hard drives (chkdsk came back clean)

All drivers are up to date, although the uploaded report might show an older version of my sound card driver, as I just reinstalled it at the behest of windows action center (which didn't make the notification go away, mind).

I'm hoping someone wiser than I can make sense of this, because it all seems so random to me. Thanks in advance to whoever that is.

Answer:BSOD at seemingly random times, memory dump blaming random drivers

How many passes did you take memtest for?

Code:
Debug session time: Mon Apr 14 14:39:57.702 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 3:33:21.985
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BugCheck 1A, {41790, fffffa800b8e2ca0, ffff, 0}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800b8e2ca0
Arg3: 000000000000ffff
Arg4: 0000000000000000
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
BiosVersion = 2201
BiosReleaseDate = 11/22/2013
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Apr 10 10:21:01.348 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:53:05.394
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+27e08 )
BugCheck 1A, {31, fffffa800f46b160, fff... Read more

1 more replies
Relevance 43.87%

My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now.

It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem.

Four days ago it started blue screening randomly (from just after the welcome screen, clicking on start button to opening a new tab in a browser). Sometimes it dies instantly, other times it keeps on going for an hour.

I tried:
- fresh install of windows (x64) (it bsod just after the input of computer name)
- another install (bsod just after welcome screen); i figured it was the video card, so i downloaded the latest driver, but it didn't help. I ran a check disk, everything was ok.
- tried the driver posted by toshiba and the newest posted by intel; i didn't get to installing anything else, because it kept crashing
- another install, this time Win 7 x32 Home, and let it update everything, didn't install anything else; still nothing.
- ran memtest x86, 2 passes once, 7 passes the second time, no errors.
- removed ram cards one at a time, still nothing
- heavy load, stressed every component, no crashes, everything was ok.
- checked out some settings in bios, nothing there
- tried driver verifier (it froze at windows logo the first time, restart 2 minutes after log on with no blue screen, froze at the windows logo the third; the I put it out of it's misery and disabled the verifier)

Safe mode works just f... Read more

Answer:Random BSOD at random moments on Toshiba L500 laptop; graphics card?

Hi luciflash.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17273.x86fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also update Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter from Realtek

Let us know the results.

9 more replies
Relevance 43.87%

Heyy..

So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically.

First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was active the whole time and it was red.
i restated the system and the same thing happened. I tried the safe mode and it didn't boot..It was stuck at classsys.pnp with solid red light of HDD..i restarted my system again.

After about 10 restarts the system finally booted up after ..i thought the problem had been solved but after 10 or so mins a damn BSOD appeared..i restated the system and the same thing..stuck at the logo with constant read activity on HDD..
Today also..the same things..stuck on logo..restart again..after 3 tries windows starts..then BSOD..then again stuck on logo..Its has become an unpredictable cycle of what the system will do next..

The exact same thing had happened before about 3 weeks back, and i formatted my HDD and reinstalled the windows new..Now i dont know what to do..Is it a software problem or my hardware like motherboard, RAM or HDD is failing..plzzz help urgently..

PS..i have attached my crash dump and other files necessary fro evaluation.

Answer:Random BSOD after start and Random stuck on windows logo screen

Test your HDD with Seatools for DOS. Take both the short generic test and the long generic test.

Let us know the results.
_______________________________________

Code:
BugCheck 7A, {20, ffffffffc000009d, fffffa8007a0a3c8, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+50080 )

Followup: MachineOwner
---------

1 more replies
Relevance 43.87%

I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are:

Driver IRQL not less or Equal
System Service Exception

and these two I just got before I decided to post:
Interrupt Exception Not Handled
No More IRP Stack Locations

I recently took this desktop back from my brother. I bought a new harddrive and installed a fresh Windows 7 x64 Home Prem. on it. I have two other HDD's connected too, a 1TB and a 500gb. I built this originally (and I had no problems when I built it) back in 09. System Specs are included. I replaced the RAM too. I know it isn't on the Approved List for my mobo, but nothing on the mobo lists 8GB and I'd like to use 8GB.

My parts are:

Asus P5P43TD Mobo
Core 2 Duo 8400 Wolfdale
(2x4gb GSKILL F3-12800CL9D-8GBRL)
XFX Radeon HD4890 (but i hadn't noticed, but radeon now only sets out drivers for the entire series, 4XXX, etc.)
Sunbeam (Ithink) 780w psu

I'm not in the market to buy a new performance pc (although the parts I have my eye on are roughly 1400)

Please lmk what you think I should do.

Answer:BSOD doing random things (Google Chrome, minecraft, random times)

I see some memory corruption in the dumps. Can you follow this tutorial: RAM - Test with Memtest86+

Report back after the tests

Thanks Ant

3 more replies
Relevance 43.87%

Hi all!

My pc randomly crashes now and then with always ending in a BSOD or on a occassion an instant reset of my computer with out the blue screen.

This is the error that i always get.
The computer has restarted after a bugcontrol, the bugcontrol is 0x00000124 (0x0000000000000000, 0xffffda02b13a7028, 0x00000000bc800800, 0x0000000000010137). Er is een dump opgeslagen in: C:\WINDOWS\MEMORY.DMP. Rapport-id: 1c510e8c-111a-4268-938f-9c4486545881.

It really starts to frustrate me, because sometimes I can play on for days without any problems and at some nights it crashes 2-5 times in a row with a 15-30 min time inbetween.

I am not a computer expert at all, so I hope I provided you with enough information to see where the problem most likely lies.

Hope to hear from you. Thank in advance!

Dimitri

According to the forum I need to upload this file as well to provide you with extra information.

Sorry for the spam moderators, I accidently uploaded this post a few times untill I read it needed approval before it would show in the forums itself.
DESKTOP-PC-wo_29-03-2017_130807,90.zip

Answer:Random BSOD both thrue gaming and random internet browsing

Hello Dimitrivn

Please fill in your system spec details as much as you can. The errors are all the same and the error record shows that it is being reported by the CPU and occurs in the CPU cache. This does not necessarily mean that the CPU is faulty since it could be caused by a bad driver, however, I do not find any clues to any driver problems from the mini-dump threads.


Code:
2: kd> !errrec ffff8900669f5028
===============================================================================
Common Platform Error Record @ ffff8900669f5028
-------------------------------------------------------------------------------
Record Id : 01d2a7f945e5cec8
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 3/28/2017 19:32:16 (UTC)
Flags : 0x00000000

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ ffff8900669f50a8
Section @ ffff8900669f5180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Data Read
Flags : 0x00
Level : 3
CPU Version : 0x0000000000610f31
Processor ID : 0x0000000000000002

=================================================... Read more

3 more replies
Relevance 43.87%

Hey Guys,
My PC has been running great for about 3years then all of a suddenly i've started getting BSOD. Only thing i can think of was on the day they started, i installed Borderlands Pre sequel to play with my girlfriend. When it happened i realised my watercooling pump had packed up and thought that was the issue (ive replaced the system and its still doing it) So i think my pump may have packed up at any time and i failed to notice.

Its doing it with nothing open but a brower, in games, all over the place but at random times. I ran a mem Test and everything came back fine on my memory. I tried a Prime test and it blue screened. I dont understand mem dumps to save my life though which is where im hoping you guys can come in and save me <3

If anyone can point me in the right direct that would be great, im hoping its a driver problem somewhere but i just dont know where as it started all of a sudden.

I hope i've uploaded everything required (ive included all dumps since this problem started)

Thanks for any help in advance
Toby

Answer:BSOD at random time with what appears to be random error codes

I'm finding that im getting ntoskrnl.exe as a problem as well as the bug code 0x0000001e. I'm still not at all sure what these point too.

I also did a much long Memtest and the Modules failed 2 tests. But im not sure if all my problems are memory or not.

I also tried to run verifier but when my computer crashed it just distorted the screen and froze. I wouldnt let me boot, so i had to boot to safe mode to turn it off.

any help will be greatly appreciated

2 more replies
Relevance 43.87%

I'm dealing with this issue almost a month now and I still didn't figure out how to get rid of it .. It's just so annoying when you are playing for example WoW and you are about to win and it freezes and you have restart it and lose every progress you have made ... It started appearing more frequently when I cleaned my CPU from dust and applied a new thermal paste ... After that my CPU is running better performance and lower temperature then before but the BSOD's are appearing more frequently then before ... I updated almost every driver as possible in my PC and I hardly doubt that a virus is in my PC when I just month ago formated my HDD ... It happens really random when I play almost every game and my Hardware is cool and in a good shape so hardware shoudn't be the problem ... I also checked if the Voltage of my Processor is good and it is ... I really don't know what should I do And I don't even know if it's worth reinstalling and format my HDD because I don't want to lose my files when I don't havy any chance to back up them
 

Answer:Random BSOD appearing at random time while playing games

How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually.
 

16 more replies
Relevance 43.46%

Hello I've been having these blue screen issues since I got the computer and the thing is, it's random but also not random. My computer may go weeks without crashing then suddenly (most likely triggered by running a certain program or game) I crash and then it happens like 10 times in 1 hours or until I get fed up. Another thing, is, I used to play a couple games here and there and this one game I played (not very resource intensive btw, usually fairly outdated older games) would never have any issues, then upon triggering the wave of crashes somehow, my computer would start crashing periodically while playing this game. But other times I could play the game for a couple hours even without a single problem.

This made the issue really hard to diagnose but I do have this info which may or may not help...

- The crash may be related to memory as a lot of the error codes are like X00000000 (have a lot of 0s in them) and a buddy of mine said that usually means memory error. However I have installed new memory chips and still crashes
- One of the codes usually looks something like XFFFF80A08 or something like that though...
- There are a couple ways I can guarantee a crash which includes: trying to sync music to my phone, trying to burn a cd, trying to install certain programs (bigger programs)
- The first crash I ever had followed the genuine windows warning and messages, I've used various remedies for it which usually work for a little while, of course until my computer ... Read more

Answer:Random yet not random BSOD crashes + genuine error

Quote:





Originally Posted by lc94fsh


- The crash may be related to memory as a lot of the error codes are like X00000000 (have a lot of 0s in them) and a buddy of mine said that usually means memory error.




Not true. The numbers listed in the bugcheck parameters (inside the parenthesis) are simply hex memory addresses and can be any hexadecimal number/letter.

I ran 14 of the dumps you submitted.

The bugcheck on all 14 dumps was 0x124 = WHEA = Windows Hardware Error Architecture, a/k/a "Machine Check Exception" - a severe and unknown hardware error.

0x124 BSODs are notoriously difficult to solve because the cause is simply "unknown hardware failure".

Unfortunately, the dumps are incapable of telling us which piece of hardware has failed. Dumps are only good for figuring out software (driver) problems.

All I can really do here is to give you some hardware diagnostic programs to run.RAM - memtest86+ - run 1 stick at a time; alternate the slots - https://www.sysnative.com/forums/har...memtest86.html
HDD - SeaTools for DOS, LONG test - https://www.sysnative.com/forums/har...agnostics.html
FurMark video card test - https://www.sysnative.com/forums/har...ress-test.html
Prime95 CPU - https://www.sysnative.com/forums/har...s-testing.html

The problem may also be with other hardware parts such as the motherboard or PSU for which there are no software tests.

If you are encountering a spe... Read more

1 more replies
Relevance 43.46%

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x000000... Read more

Answer:Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmd... Read more

9 more replies
Relevance 43.46%

Heya,

So my computer started freezing randomly, getting BSOD randomly, and after rebooting, the screen wouldn't receive any signals a while back and I had just put my computer away but decided to look into it a bit more and to get a better idea of whether it could be a problem with software or hardware. Uploaded the zip as requested, the perfmon file is in the rar as well. About to restart so that windows can install updates has computer hasn't been on for a little while, figured I should post this here before I restart incase I can't get my computer back to here. Also added dxdiag report for system information etc.

Windows 7 Home Premium 64-bit is the original OS installed and still using it, full retail, OS installed when computer was built, never re-installed.
Bought everything for this computer on the same day, 04/01/2011, so roughly 18 months old. System specs are as follows;
Case: Thermaltake V5 Black Edition.
Motherboard: Asus M4A89GTD Pro/USB3.
CPU: AMD Phenom II X6 2.8 GHz Processor.
RAM: 4GB DDR3 1600 CL8.
Hard Drive: 1 TB Western Digital Sata / 64Mb Cache.
Video Card: Radeon HD 5870 1GB GDDR5.
Power Supply: Cooler Master 650w.
Monitor: Viewsonic 19" LED.
Mouse: Logitech MX518 Optical Gaming Mouse.
Keyboard: Razer Arctosa.
Headset: Creative Fatality Gaming Headset.

If you need any more information, just let me know, I can use the internet on my phone if my computer doesn't work. Really appreciate any and all help, thanks very much.

Answer:Random freeze, random BSOD, no signal to screen

Oh and I still had the error up from when it first booted up,
"Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF800032B95DC
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\071112-36488-01.dmp
C:\Users\Lachlan\AppData\Local\Temp\WER-51355-0.sysdata.xml
"

Well it rebooted perfectly fine. hmm. Still curious if there's anything I should be looking into though.

9 more replies
Relevance 43.46%

Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran

Answer:Daily BSOD random times random Apps

  
Quote: Originally Posted by bskaggs


Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran


Hi bskaggs,

Welcome to Seven forums.

Here are you bugcheck details:






Quote:
YMBOL_NAME: dxgmms1!VidSchDdiNotifyInterruptWorker+b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME: dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5164dc13

FAILURE_BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b

BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b


Update your video driver from here and not from the Windows Update:

Drivers & Downloads | Dell US

Also, perform a clean startup to ensure no conflicts with the background programs:

Troubleshoot Application Conflicts by Performing a Clean Startup

Keep us posted with the results so we can advise you further.

1 more replies
Relevance 43.46%

I am typing this original post from my cellphone because that is where I wrote the blue screen error finally once it started happening frequently, just today so please do forgive me if I am missing anything but I'll come back on my Desktop and try to finish anything needed in the post once I submit it from my phone.

Here is the error message:
STOP:
0x0000001E (0XFFFFFFFFC0000005, 0XFFFFF80003281DC2, 0X0000000000000000, 0X000000000000020)

I will let you know right off the bat that I am definitely not a techie so this is all very confusing to me. Please any help would be extremely appreciated!! Thanks again I'm advance!

Now before I came here to post, I did do a few hours of research and eventually took the following steps.

1. I have reinstalled my Nvidia Graphics Driver.
2. I have deleted, uninstalled, cleaned up a great deal of space on my desktop.
3. I have used Safe Mode to enter my Device Manager where I looked at my Network Adapters and made sure that all of them were up to date, this was easy because I only had 3 network adapters. The first two were both up to date. The third one is "Microsoft Virtual Wifi Miniport Adapter" which wouldn't allow me to update because it said it was not from a "trusted source" and windows didn't want to authorize. For this reason I just right-click and Disabled it.
4. I have run SFC /scannow from cmd as Administrator. The results:
"Windows Resource Protection did not find any integrity violations... Read more

Answer:BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Hello oksm08, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

1 more replies
Relevance 43.46%

Happens almost daily. Some days I can be using the computer heavily for 12 hours without an issue. Other days it'll crash within 10 minutes. After replacing hardware, mobo, gpu, and hdd, still having the issue, only I'm actually getting a BSOD now. Prior to this I wasn't even getting a BSOD, just a freeze with the sound skipping a bunch and a frozen desktop. Only way to fix it was to force a shutdown.

sfc /scannow shows no issues. ChkDsk is fine. I'm just about to use Driver Verifier. Other than that I don't know where to go from here.

SPARKYDESKTOP-Sat_08_29_2015_150539_55.zip

Memory.DMP says it's possibly from memory_corruption. I've run memtest for 24 hours with no issues. Here's the analysis from WinDbg:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800937c8e80, Address of the instruction which caused the bugcheck
Arg3: ffffd001b0ef3fa0, Address of the context record for the exception that caused the bugcheck
Arg4: 00000000000000... Read more

Answer:BSOD - Random times with random activity levels

Hi sparkybear,

Welcome to the 8forums.

Please update CPU-Z

Code:
4: kd> lmvm cpuz137_x64start end module name
fffff801`f061c000 fffff801`f0625000 cpuz137_x64 T (no symbols)
Loaded symbol image file: cpuz137_x64.sys
Image path: \??\C:\Users\RYANRI~1\AppData\Local\Temp\cpuz137\cpuz137_x64.sys
Image name: cpuz137_x64.sys
Timestamp: Mon Feb 17 15:22:16 2014 (53021B18)
CheckSum: 000145F6
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPD pass through remover.
Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


Diagnostics

MEMTEST86+

Please Run Memtest86+

   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, e... Read more

2 more replies
Relevance 43.46%

Hey guys, so I am in a bit of a pickle. I have an HP m6-k015dx laptop and it is giving me hell. I will get random BSOD's, usually at or a short while after login. They usually happen consecutively and then stop. I was able to enable driver verifier in order to see what was wrong. After it was enabled it did not crash so I decided to use memtest to check the RAM. 50% into the first pass it had detected 650 errors. So I tested each stick in each slot and it came back fine. I then tested both sticks again and it came back without an error. I tried to boot normally but I received multiple BSOD's. I then booted into safe mode with networking and received a BSOD. After that I booted into safe mode and was able to retrieve my minidump files. After analyzing them on another computer each one says that it is probably caused by ntoskrnl.exe What is my course of action from here on out? I really have no idea what to do.

My mindump files are zipped and attached.

Answer:Random BSOD, Random erros, Debug says ntoskrnl.exe

Set Optimized Defaults in the bios, then save. Check that storage is set to AHCI mode, if that is how it is currently set. If not, change the setting to that. Save.

Boot to Windows.

Download/install/run CPU-Z.

Type snippingtool into the Start menu then press Enter. Use it to make a screenshot of CPU-Z Memory tab.

Then, make a screenshot of the SPD tab - one for each stick of RAM you have. So if two sticks, two screenshots for this...etc... (Change the slot # to get to others, in top left of tab.)

Please attach the saved screenshots (.jpg format is good) to a new post here.

26 more replies
Relevance 43.46%

Hey everyone, Im new here on this forum.

I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly.

What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.

And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2012-02-26T23:15:40.693210900Z

EventRecordID 6298

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Jason-PC

- Security

[ UserID] S-1-5-18


+ EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

I've attached my BSOD info along with my Heath report.

if anyone could help please let me know.

Windows 7 Home Premium 64x
System hardware age: from 3 years to a few months.
OS age: just recentl... Read more

Answer:Random BSOD during Random times, error 0x8000000000000002

No DMPS in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

8 more replies
Relevance 43.46%

Hello , im having random BSOD issues and after a BSOD i can use my PC again but the problem is it keeps happening randomly and i will be able to use again
Here are some of the errors i have got:
PAGE FAULT IN NON PAGED AREA
BAD or CORRUPTED POOL
MEMORY MANAGMENT
I have the files Windows_NT6_BSOD_jcgriff2 and perfmon files included in this post
System specs
Os: Windows 7 home premium 64 bit
I have bought this about a week ago , i had it built.
Proccesor : AMD FX 6100 Proccesor
gpu :nvidia gtx 560
ram: 8gb
hard drive : 1tb

Answer:Random BSOD errors happening at random times

Hello, welcome to SevenForums!

I have taken a look at your provided dump files. There are tons of memory management and memory corruption errors. Before we continue, if any of your hardware is overclocked, PLEASE reset your clocks to stock for diagnostic purposes.

First off, before we continue onto memory.... in your drivers list I noticed you have sptd.sys listed, which is the driver for Daemon Tools. Please uninstall Daemon Tools from your system as it's known to cause many issues in the Windows 7 environment. Once you've done so, restart and then run DuplexSecure's sptd uninstaller to fully remove sptd.sys from your system. After you've done so, restart again.

Next, tons and tons of memory management and memory corruption errors as I've said earlier. Please read the following thread to download and install Memtest to test your memory for any bad sticks.

9 more replies
Relevance 43.46%

My PC keeps crashing and i have no idea why.

Answer:BSOD at random times caused by random drivers

Dont use a BETA display driver.

Uninstall the installed display driver using DDU. Then install the CCC 14.4 WHQL only.

Also Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD after doing these two.
_______________________________________

Code:
fffff880`0786c6d8 fffff880`03ed7eccUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x4fecc

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff880110ec200, fffff88004053258, fffff88004052ab0}

Probably caused by : atikmdag.sys ( atikmdag+10200 )

Followup: MachineOwner
---------

9 more replies
Relevance 43.46%

Hey!

I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system.

After installing Windows for the first time I had some problems downloading updates and I got a couple of BSOD's during the update process. I then thought the installation was faulty and reinstalled it again from a different DVD. Once again I got two BSOD's during the Windows update but after all updates and drivers had been installed the problems vanished and three days pass without any problems.

Today I was watching a movie from my computer and suddenly the computer made a BSOD. I rebooted, opened Event Viewer and got a BSOD again.

I ran memtest for 6 hours and it passed 5 times without errors. I had set the memory timings to 9-9-9-24 and memory voltage to 1.5 after the first BSOD's a few days back to ensure they were running at the proper settings. Apparently it didn't help.

I'm really not sure what might the problem. The new processor consumes 25W more than my previous E5200 so maybe my 500W power can't keep up with it sometimes?

All the required files are attached and information of my setup can be found in my profile. I really hope someone smarter than me could figure out what might be the problem!

Answer:Random BSOD's with random error messages after a new setup

Added a new minidump from the latest crash. Happened again while watching a HD-movie. Also a bump.

9 more replies
Relevance 43.46%

Hi All,

First time poster and hope somebody can help.

Have been getting BSOD for a few days now. All at random times, while using the internet, watching movies or just playing music.

Have even formatted but of no use.

Most recent BSOD was MEMORY MANAGEMENT but its different all the time.

Answer:Random BSOD messages, happens at random times while using computer

Welcome.

Could you configure the system to collect small memory dumps.Dump Files - Configure Windows to Create on BSOD

1 more replies
Relevance 42.64%

Has been happening on and off for the last couple of months, strangely enough the problem went away once after we had a power surge but has now returned, Usually get at least 1 a day at a random time ( Maybe a game, maybe on youtube, maybe just right clicking a folder )

Took a photo of it last time and got this error code,

*** STOP: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

After a bit of searching this forum i found i should also post a dump log from C:\Windows\Minidump ... When trying this i keep getting an access is denied message but i have admin privileges ?

Should also add that i have read about faulty drivers/ software and ran software to "fix" the problems yet i still get the BSOD.

Will try and get the dump log on for my next reply but any ideas straight off the bat ? Seems to be quite a common problem.

Anthony

Answer:BSOD, Random times on Random days

Welcome aboard, Chovies.

Post it, following the Blue Screen of Death (BSOD) Posting Instructions so that we can get adequate information to help you.

5 more replies
Relevance 42.64%

I recently built a computer and ive started to get memory management bsods randomly, and even some other bsods as well. Programs running on my computer sometimes just randomly crash with out a reason. I also get chromes "aww snap" error page constantly and to top it off Adobe flash player crashes constantly on chrome as well. Is there anyway to fix all of these problems? i cant find a solution anywhere

Answer:Random BSOD's, random program crashes

Do you have any program of SystemRequirementsLabs installed? The BSOD is casued by cpudrv64.sys.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000096, fffff8800a7ba912, 0, 0}

*** WARNING: Unable to verify timestamp for cpudrv64.sys

Probably caused by : cpudrv64.sys ( cpudrv64+1912 )

Followup: MachineOwner
---------
And this driver belongs to SystemRequirementsLabs.

NAMEDESCRIPTIONFILEcpudrv64 cpudrv64 \??\c:\program files (x86)\systemrequirementslab\cpudrv64.sys
Moreover, the driver is very old (and the program too, I guess)

Code:
fffff880`0a7b9000 fffff880`0a7c1000 cpudrv64 T (no symbols)
Loaded symbol image file: cpudrv64.sys
Image path: \??\C:\Program Files (x86)\SystemRequirementsLab\cpudrv64.sys
Image name: cpudrv64.sys
Timestamp: Tue Aug 11 22:09:13 2009 (4A819EB1)
CheckSum: 0000D622
ImageSize: 00008000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
I would suggest you to uninstall it.

Daemon Tools, Alcohol 120% and Power Archiver Pro use... Read more

7 more replies
Relevance 42.64%

I've been getting random BSOD's recently and my PC was set to automatically reboot so I never made note of the error codes! I have sice turned off the auto-restart and noted the error codes. Below are the most recent from the past couple of days.....

IRQL_NOT_LESS_OR _EQUAL.
STOP: 0X0000000A (0X0000000,0X0000001C, 0X00000001, 0X804E1BF8)

BAD_POOL_ERROR
STOP: 0X00000019 (0X00000020, 0XE35261A0, 0XE35261A0, 0X0C00002)
STOP: 0X0000008E (0XC0000005,0X805515A1, 0XA7A51AF8, 0X0000000)
STOP: 0X0000008E (0XC0000005, 0X805519E9, 0XBA49AA98, 0X0000000)

BAD_POOL_CALLER
STOP: 0X000000C2 (0X0000007, 0X000000CD4, 0X0000000, 0XE1949B48)

SYSTEM DETAILS...
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name OWNER-*****************
System Manufacturer TriGem Computer NETHERLANDS
System Model Advent Series
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~3401 Mhz
BIOS Version/Date American Megatrends Inc. 1002.004, 16/08/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name OWNER-**********************
Time Zone GMT Standard Time
Total Physical Memory 2,560.00 MB
Available Physical Memory 1.48 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1... Read more

Answer:Random BSOD's and even more random stop errors

When did you buy this TriGem computer, and have you contacted them.
I worry about any computer built by TriGem as they are closely affiliated with the often failing eMachines models... and often failing hard drive failures.
Their motherboards go bad as they age and curl...
What you describe is typical of the motherboard problems.
In many cases, Tri-Gem makes the motherboards designed by Intel and others, in their own factory under license to the original manufacturer.
Of these "licensed" boards, we have found failure rates as high as 65%.
Document all contact efforts.
I would immediately keep documentation on all contacts, and with the seller.
 

2 more replies
Relevance 42.64%

Hi,

I use my computer mostly for office work and have never experienced BSOD until about a month ago when I updated my drivers. One of the drivers I updated was the audio driver that immediately began causing problems including BSOD. I rolled back the driver update and reinstalled the driver which seemed to resolve the issue for a while but then after a week the BSOD began again and I have been unable to isolate the cause since then. I have continued to update firefox, antivirus, windows and other security software I have always used and these softwares never seemed to cause any problems before.

There are specific times when the BSOD occurs, mostly it is when I start the computer and during the first few minutes after windows loads or when I resume the computer from hibernate/sleep mode.

I have included the dump files and attached a screenshot.

Any help you can provide would be great.

Thank you

Answer:BSOD at random times while doing random activities

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_SF_17-02-2014.zip\SF_17-02-2014\021414-19593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.x86fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0x8361a000 PsLoadedModuleList = 0x837634d0
Debug session time: Fri Feb 14 02:20:03.737 2014 (UTC - 5:00)
System Uptime: 0 days 0:03:02.814
Loading Kernel Symbols
...............................................................
................................................................
................................................................
..
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {440070, 2, 0, 8ca7ba1e}
Unable to load image \SystemRoot\system32\DRIVERS\TeeDriver.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for TeeDriver.sys
*** ERROR: Module load completed but s... Read more

8 more replies
Relevance 42.64%

It's been over three months and I am still struggling with multiple BSOD.

I wish I were more able to fix this but, I am not.

If anyone will review to possibly help with this I appreciate it more than you know.

Spent over 2400$ on a new system and it's not gone long without BSOD or often just locking up requiring a restart.

New file created for diagnostics and uploaded.

Answer:BSOD random times, with random errors.

Pwnsesh mate don't quite fully understand what you mean by updating your driver?? There are a few in a system so which one ??

Also what are you doing with the BIOS?? It is something best left well alone unless you know what you are doing. Before you do anything I would back up the registry and any data you need.

Registry - Backup and Restore

Imaging with free Macrium

3 more replies
Relevance 42.64%

Hi,
I am getting BSODs at random times, while doing different things each time. Been getting them for 5 days trying to narrow down what could be causing it. Searching lead me here. I did the posting instructions. Also did sfc/scannow 2 times that was suggested on another post. After the scannow both times it told me there were corrupt files that it couldnt fix. Any help moving on from here would be great.

Thank you.

Attachment 71239
Attachment 71240

Answer:BSOD at random times doing random things.

Please upload a new zip file, the attached zip file is empty

I can't find any problems in the CBS.log, but I'm no expert on that part.
Please try following command in admin command prompt

Code:
DISM /Online /Cleanup-Image /RestoreHealth

If there are problems with RestoreHealth, please follow step 6 or 7 (depending on the file you have from the download) from the tutorial DISM - Repair Windows 10 Image - Tutorial.
If /RestoreHealth says the corruption has been repaired succesful:


Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

2 more replies
Relevance 42.64%

Hi,
I am getting BSODs at random times, while doing different things each time. Been getting them for 5 days trying to narrow down what could be causing it. Searching lead me here. I did the posting instructions. Also did sfc/scannow 2 times that was suggested on another post. After the scannow both times it told me there were corrupt files that it couldnt fix. Any help moving on from here would be great.

Thank you.

EVAN-Thu_03_24_2016_212710_16.zip
CBS.zip

More replies
Relevance 42.64%

Hi everyone,
I have a problem with my computer. I've had only had 2 bluescreens so far, but I'm rather concerned. The first bluescreen was when I just pulled the charger from my computer. The second time was right after I plugged in my charger. I have a new battery.

I have attached all the bsod files below. Thanks in advance.

System specs:
Windows 7 Home Premium 64 bit
Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
LENOVO 4173C19
4 GB total, 3.88 usable
HDD: HITACHI HTS723232A7A364
Sound card: Conexant 20672 SmartAudio HD
Graphics card: NVIDIA NVS 4200M

Answer:BSOD at random times while doing random things

MSINFO32:

Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter.
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSSIKAT\Downloads\BSOD\060815-88421-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`03014000 PsLoadedModuleList = 0xfffff800`0325b730
Debug session time: Tue Jun 9 06:58:03.636 2015 (UTC + 6:00)
System Uptime: 3 days 1:50:56.466
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track dow... Read more

6 more replies
Relevance 42.64%

Hello,

I recently bought a new pre-built PC and since day 1 it randomly keeps getting BSOD's and restarting. It's happened during random times whilst doing different things e.g. whilst I've been browsing, or playing a game, or running virus scans etc. All basic and small tasks. Sometimes it restarts without the BSOD, but the times the BSOD has appeared it has said different reasons for the crash such as IRQL_NOT_LESS_OR_EQUAL, Memory Management, Kernel Securiy Check Failure, and Unexpected Kernel Mode Trap.

I've done a lot of solutions I've found on the Internet but none have worked so far.

I've attached the debug zip file.

Any help would be much appreciated. Thanks!

Answer:Lots of random BSOD's from doing random activities.

Hello Raghib

Welcome to TenForums!

I've looked at the last three of your crash dump files, 2 of which refer to memory corruption, this does not in itself mean that your memory is bad but it would be worth checking it using Memtest86+. This can take a long time to complete 8 passes; possibly a full day for your 16GB.

One file had a reference to a driver error:


Code:
ffffd000`22ffa358 fffff800`87f3f995Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x28f995

This would suggest it is worth ensuring the NVidia drivers are up to date or try to reinstall them. If you do this, uninstall everything and just load back the driver file only by selecting custom install.

1 more replies
Relevance 42.64%

DCP Watchdog, Memory Management, Kernel Security Failure and several others at random times - especially during large file transfers between drives. I did a memory test and it stated there was an issue but I removed the culprit and the random BSOD continues.

Thanks for your help

Answer:BSOD at Random Times for Random Reasons

Have you rerun the memory test? If so, did it pass?
Have you run other hardware diagnostics? Here's a link to the one's I suggest (and they're free): Hardware Diagnostics Start with the hard drive tests as this involves "large file transfers between drives"

You have 3 or 4 hard drives. What is the make/model/wattage and age of your Power Supply?

Lot's of Windows Updates failures in the WER section of the MSINFO32 report. If the problems continue, please post over in the Windows Updates & Activation - Windows 8 Forums for further expert assistance with this issue.

Out of 5 memory dumps there were 4 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or H... Read more

1 more replies
Relevance 42.64%

My system has been extremely unstable since the last Windows updates about a week ago. Kaspersky Internet Security stops and restarts. Firefox, Outlook, World of Warcraft,etc crashing frequently. BSOD several times a day. I come to my desk and the logon screen is often there indicating the system crashed and rebooted while I was out.

This is very atypical for my system. I often go weeks without rebooting or having any program crash. I have noticed two error messages in the BSOD. One was memory management and the other was bad pool header. I suspect there have been others, but I'm not present every time Windows crashes.

Win7 Pro 64bit retail original OS on this system. I built this system about 6 months ago and it's been running very well until a week or so ago. Suggestions gratefully accepted.

Answer:BSOD at random times doing random things

One of the memory dumps in the WER section of MSINFO32 blames Kaspersky (as do 2 of the 9 memory dumps). Please do the following:





Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the antivirus software from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of the antivirus software using one of these free tools: Antivirus Uninstallers
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's
NOTE: NEVER run more than 1 anti-virus, firewall, Internet Security/Security Center application at the same time.


Older versions of Acronis are known to cause BSOD's on Win7 systems also. Your copy has drivers that date from 2007. As such you MUST uninstall it.

In the table below is a list of drivers. Please update or remove the programs associated with any drivers dated from 2009 or earlier. Below the table is a list of links to more information about the drivers (it'll help you find out what programs belong to the drivers in question).

If all of that doesn't fix it, then please run Driver Verifier according to these instructions: Driver Verifier Settings

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (... Read more

4 more replies
Relevance 42.64%

Hi,
My PC is giving random BSOD's, there is not set pattern. Once I got a BSOD while playing NFS Rivals and then while surfing via firefox.

Not only this: I am getting random grey screens, where PC monitor will go completely grey and PC will stop responding , task manager wont open. So ulimately I have restart via button on the CPU.
Yesterday, I left my PC turned on overnigh for some downlaoding stuff, I woke up in the morning to found that it hung up at the night giving a grey screen.

Just now I was plauing FIFA14 and monitor again suddenly went grey and pc was not responding although music (media monkey) was playing in the background, but pc wasnt responding, so i have to restart it.

And on other occasion I got a BSOD on the login screen

EDIT: Please check the second post too.

Answer:Random BSOD's, and and random grey screens

Hi, I just had a BSOD again. I have attached some screenshot of the error and also uploaded the new system and dump files.
Please check
Attachment 312036

--------------------------------------------------------

Attachment 312037

---------------------------------------------------------

Attachment 312038

2 more replies
Relevance 42.64%

I have a random BSOD issue. I thought I had fixed it but still having issues.






Quote:
windows version: Windows 7 , 6.1, build: 7600
Hardware: ASUSTeK Computer INC., M2N-SLI
CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AMD586
RAM: 4GB total


I recently installed Windows 7 home premium edition to a new hard drive. I was having issues with a small older drive, so I went with fresh install thinking it would fix my issues.

nope. New drive and new windows install and I still get BSOD at random times, and its not the same errors.



So I got a program to read what was causing crashes, Info below. ( not too good at forum formatting ether...) I also did the log dump program recommended on forums. its been attached.

Help? I have no clue as to why or what is going on anymore...I have read on these forums and googled my issue/error codes so much, with no solid fix. Its beyond frustrating.











Quote:
On Wed 10/21/2015 11:37:43 PM GMT your computer crashed
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0xA (0x51, 0xFF, 0x1, 0xFFFFFFFF82E04BF2)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at ... Read more

Answer:BSOD (random ones at random times) Windows 7

Had a look through your dumps and all of them blame a various core windows driver for the crash, as this cannot truly be the cause then some further testing will be required
Initially I would run an sfc scan to check for any corruption within windows itself SFC /SCANNOW Command - System File Checker
Next I would run memtest to perform a thorough test of the RAM, preferably overnight for a minimum of 8 passes SFC /SCANNOW Command - System File Checker

I notice you have no windows updates installed, it would be good to get this done as missing SP1 means you are a long way behind

Depending on the outcome of these will determine what else needs to be done but as the problem has transcended to a new HDD & OS then more hardware testing is likely

1 more replies
Relevance 42.64%

Hello,

I recently bought a new pre-built PC and since day 1 it randomly keeps getting BSOD's and restarting. It's happened during random times whilst doing different things e.g. whilst I've been browsing, or playing a game, or running virus scans etc. All basic and small tasks. Sometimes it restarts without the BSOD, but the times the BSOD has appeared it has said different reasons for the crash such as IRQL_NOT_LESS_OR_EQUAL, Memory Management, Kernel Securiy Check Failure, and Unexpected Kernel Mode Trap.

I've done a lot of solutions I've found on the Internet but none have worked so far.

I've attached the debug zip file.

Any help would be much appreciated. Thanks!

Answer:Lots of random BSOD's from doing random activities.

Hello Raghib

Welcome to TenForums!

I've looked at the last three of your crash dump files, 2 of which refer to memory corruption, this does not in itself mean that your memory is bad but it would be worth checking it using Memtest86+. This can take a long time to complete 8 passes; possibly a full day for your 16GB.

One file had a reference to a driver error:


Code:
ffffd000`22ffa358 fffff800`87f3f995Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x28f995

This would suggest it is worth ensuring the NVidia drivers are up to date or try to reinstall them. If you do this, uninstall everything and just load back the driver file only by selecting custom install.

1 more replies
Relevance 42.64%

Hi,

I keep getting random computer hangs could be once a month or 10 times in a day its really random when it does it. In between these I have been getting equally random BSOD, I could be playing a game or surfing the web or nothing at all and it will just BSOD, with code 0x0F4 every time.

I am presuming the two problems are related so hopefully solving the BSOD can sort out the random hanging.

I know this code is a hardware/driver issue so I have ran memtest for 8+ hours on several occasions with no errors detected at all so I don't think its a RAM issue. I have also ran Prime 95 for several hours with no issue. I also believe I have all latest drivers and bios installed.

Any help would really be appreciated to finally solve this issue, thanks!

Answer:Random 0x0F4 BSOD + Random hanging

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8008364910, fffffa8008364bf0, fffff800035d9270}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------

0xF's can often be symptomatic of HDD errors. Run the DOS version of SeaTools - run both SHORT and LONG tests, and report back.

SeaTools for DOS and Windows - How to Use

8 more replies
Relevance 42.64%

Recently had my computer open and lying on it's side for around 5 days, put the cover back on and booted it up to play some WoW and started having BSOD's, constantly at windows log in, or 5-30 mins sitting at desktop or playing games. Including zipped folder of eventvwr files. Thanks in advance!

Answer:Random BSOD's random error codes

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

9 more replies
Relevance 41.41%

PSU: Corsair 750W CMPSU-750TXEU
Case: THERMALTAKE ElementS
CPU: AMD Phenom II X4 965 BE
HDD: SAMSUNG HD502HJ SpinPoint F3 3,5" 500GB
GPU: ZOTAC Geforce GTX480 1536MB DDR5
Lettore: LG Super Multi CH10LS20
RAM: CORSAIR Dominator 2x2 GB DDR3 (CMP4GX3M2A1600C8)
Mobo: Asus M4A88T-M/USB3
OS: Windows 7 Ultimate 64bit

I've got this system running since november 2010 and i have had not a single problem. About a month ago, i had issues trying to boot windows: i had to turn power on/off loads of time until i was able to get to desktop. Since that day, Blue Screens happened every time i got to desktop, after few seconds or after few minutes... Freezes and BSoD kept coming, so i ran some tests: memtest86, scandisk, a samsung hdd test... They showed no errors but memtest.
Memtest86 found out loads of errors coming from both RAMs and so i bought new ones: Kingstone HyperX KHX1600C8D3K2. I had same problems: freeze and errors just after boot, not later (played some heavy game for more than 5 hours or so).

I tested old rams on another computer, and they worked just fine.

Oh, and i format/install Windows7 about three times.

I tried to remove GPU and tried to use MOBO GPU, but it still freezed.

Right now i have no freeze/BSoD on boot, but only while playing (after few secs).

P.S. : I had 2 BSoD using the BsoD collecting application.

P.P.S. : Some things are written in italian because i'm running an italian OS.

Answer:Random BSoD, BSoD while playing, BSoD on boot

Here some Blue Screen coming from Driver Verifier ...
If my Blue Screen View says the truth, they come from MagicIso... Which i have installed, like, today...

3 more replies
Relevance 41%

Is Windows 7 Professional 64bit

Fresh install but it is getting on
Full retail version?

Acer Aspire timeline X 5280tg Approx 18 months old.
OS age approx 12 months.

I get the BUGCODE_USB_DRIVER bsod and I had a previous blue screen error before this one is in dump files.

Tried memory tester and came up ok.

Help would be much appreciated.

Answer:BSOD Tribes Ascend, BF3, Random BSOD BUGCODE_USB_DRIVER Acer Laptop

Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
Remove Daemon Tools/Alcohol 120%. The driver associated with it (SPTD) causes BSOD and it caused one of yours - DuplexSecure



Code:
athrx.sys Mon Oct 05 12:33:57 2009 (4ACA1FF5)
Update your Atheros driver. It caused a crash - Drivers for Atheros AR5B93 and Windows 7


Code:
atikmpag.sys Mon Jun 13 21:23:20 2011 (4DF6B808)
Update your video card - ATI Catalyst

Problem Devices

Code:
Device PNP_Device_ID Error_Code
Teredo Tunneling Pseudo-Interface ROOT\*TEREDO\0000 This device cannot start.
Microsoft 6to4 Adapter ROOT\*6TO4MP\0000 This device cannot start.
Microsoft 6to4 Adapter #2 ROOT\*6TO4MP\0001 This device cannot start.
Microsoft ISATAP Adapter ROOT\*ISATAP\0000 This device cannot start.
Microsoft ISATAP Adapter #3 ROOT\*ISATAP\0001 This device cannot start.

Code:
Event[4142]:
Log Name: System
Source: Disk
Date: 2012-02-19T21:45:23.424
Event ID: 52
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: LAPPY
Description:
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.
Run a hard drive scan on all your drives. Also, I would back up any important information just in case your hard drive does fail
Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both lo... Read more

1 more replies
Relevance 41%

I was merely resizing a Windows Explorer window on the desktop when the monitor went black for 15-20 seconds, then the mobo splash screen came up, and Windows booted back up. The "Windows shut down unexpectedly" window came up and the details said it was a BSOD. The pertinent log files from the DM Log Collector app are attached.

*edit* I built this system over 3.5 years ago and I've never reloaded or reformatted anything in that time. Maybe it's about time to reformat C: since I have all my data files on a separate drive anyway.

More replies
Relevance 41%

Hello,

You guys have been great before, and I hope that someone can help me tackle this.

My friend's computer started going weird after playing a game that uses Shockwave. (That's the last thing they remember...) When loading into Windows (regular mode), after selecting (any) user all you see on the screen is black with blue spots all over.

They're using an Asus P5DV2-VM SE motherboard
Intel E2140 (1.6GHz) CPU,
1GB DDR2
with a 450w PSU.

Originally I thought it was video-driver related as they're using the onboard graphics card. It's a Via P4M890-based motherboard although it has a PCIe expansion.

Loading in safe mode usually works, and loading into VGA mode got me into Windows however I received a 0x8E pretty quickly. At some point I also received a 0xA3. I tried uninstalling the video driver (Via Chrome9). That allowed me back into regular mode but soon after I got a BSOD. I tried running System Restore from safemode and I got 0xA3 (ACPI_DRIVER_INTERNAL) but I can't find info on fixing this one.

Thanks in advance,
Ram

Answer:Bsod 0xa3 And 0x8e - Unusual/unclear Picture And Random Bsod

0x8e errors are usually caused by driver issues. Here is what Microsoft says regarding 0xa3 errors:An inconsistency in the ACPI driver is so severe that continuing to run would cause serious problems. One possible source of this problem is a BIOS error.Drivers and Windows interacts with the BIOS. Have you tried a BIOS update? Usually this is not recommended as it can cause serious issues if the update is not performed correctly, but is recommended when the BIOS is suspected to be the cause of an issue such as this.EDIT: all you see on the screen is black with blue spots all over.I just remembered having an issue like this, and it was corrected by simply reseating the video card. Just thought I would mention this.

7 more replies
Relevance 41%

Hello. I am experiencing some random BSODs. It happens no matter what program is running. It could be in a game, surfing the internet, or listening to music. It is very random. Happens about once every two days on average. Some days are worse.

I have tried running driver verifier, but it would still only bsod occasionally, except it would bsod on startup instead of being in the desktop and getting a bsod.

I have also ran memtest x86 a few times and found no errors.

My windows 7 is:
-x64 bit Professional Edition
-Original OS installed on my system (I built the system)
-Full retail.
-Built my system over the summer. Been getting occassional BSODs ever since.
-OS installation is about 4 months old.

And if this helps, My system parts are:
-Intel i7 860
-EVGA P55 LE motherboard (using onboard audio as well)
-EVGA gtx 470
-Adata G-Series DDR3 1600mhz ram (2x2gb)
-some low-end hitachi 750gb hard drive
-Thermaltake Toughpower XT 775 watt.

Yes I have installed all the latest drivers from all the manufaturers' websites.

I have also attached a BSOD dump and system health report.

Please and thank you for your help.

Answer:Random BSOD... Help please (BSOD dump & system health report attached)

Welcome to SF.

Like you indicated, you have the latest video driver.

However, your network and wireless network drivers need updating.

Marvell Yukon:
Driver c:\windows\system32\drivers\yk62x64.sys (11.10.6.3, 384.00 KB (393,216 bytes), 6/15/2009 2:10 AM)

D-Link Adapter:
Driver c:\windows\system32\drivers\athrx.sys (8.0.0.238, 1.47 MB (1,542,656 bytes), 10/5/2009 4:34 PM)






Quote:
Followup: memory_corruption
---------

4: kd> !analyze -v;r;kv;lmtn;lmtsmn
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000024, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000348856f, address which... Read more

7 more replies
Relevance 41%

Hi Guys,
I am new to the forum,
My Pc started crashing recently after my old PSU(600w) busted and i replaced it(400w),The funny part about the bsod's is i get different codes each time....eg (d1 then a then 3b..etc) at first i thought it was maybe a virus... so I formatted The PC and then installed the latest drivers i could find for my PC...The results were only slightly different from the past (The computer would stay up a little longer before it crashed), I ran a memtest and RAM is fine, Then I thought it was my GPU overheating....So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound.....Still no improvement... and here I am Now


My Specs:-
Motherboard:- Asustek P5Q Se
CPU:- Intel Core 2 Quad Q8300 Yorkfield
Socket :- LGA 775
GPU:- Nvidia GTX 460 2GB (ZOTAC)
RAM:- 2x2GB DDR2
HDD:-Seagate Barracuda 500gb

Answer:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

1 more replies
Relevance 41%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

Answer:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, ffffe00154472028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
I know you said you've run hardware tests, but in our experience you have to run specific tests according to a specific regime. Run all of these and report back.

RAM - run a minimum of 8 consecutive passes, no less
RAM - Test with Memtest86+

CPU - run the STANDARD test only
CPU - Stress Test Using IntelBurnTest

Video - run for 20 mins
Video Card - Stress Test with Furmark

Storage - run the SHORT test only using the DOS version
SeaTools for DOS and Windows - How to Use

3 more replies
Relevance 41%

Well I frequently get random BSOD's when I am surfing the net. I never download anything and am very careful when running .exe's.

I got one BSOD prior to creating this thread and then as I was creating it I got another!

Anyways, I have attached the dump files to this thread.
Thanks in advance to whoever chooses to help me

Answer:Random BSOD at random times!

I wonder if Avira is causing the issue. Please remove it with this tool: http://www.avira.com/en/documents/ut...ninstXPeng.zip

Replace it with Microsoft Security Essentials: www.microsoft.com/Security_Essentials/

Also be sure to update your Realtek network driver:
Code:
Rt86win7.sys Thu Feb 26 04:04:22 2009
Go to the computer manufacturer's site and download the latest version.

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\JK\Desktop\Dump files\Dump files\072810-25053-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0x82a3f000 PsLoadedModuleList = 0x82b87810
Debug session time: Thu Jul 29 01:51:50.899 2010 (GMT-4)
System Uptime: 0 days 1:56:51.866
Loading Kernel Symbols
...............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* ... Read more

7 more replies
Relevance 41%

x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? this is a built computer by myself. have had 64 bit forever on here
- an OEM or full retail version? oem

- What is the age of system (hardware)? memory is about 2 years old everything else is about 5 years old
- What is the age of OS installation (have you re-installed the OS?) os was installed a few months ago.

attached is the info that was requested. these blue screens happen at completely random times. could be during boot up. could be just sitting in sleep and blue screen. just came home one day from work and it started doing this. please help

Answer:random BSOD happens at random times

anyone please help? this is my main computer and i need this comp working for work.

2 more replies
Relevance 41%

Hi, I'm really hoping to solve the problem since it's starting to distract seriously. I think since early summer BSODs been flashing now and then and now more and more often. Naturally I've tried memory solutions found online for memory related BSODs but now the different causes seems overwhelming.
Don't have the skills to work this out so I need your help.

system:
Win 10 home 64bit (reinstalled some time ago, did help while, but not so sure how clean install that was)
i5-4430 (not overclocked)
Ram 8GB 1333 (XMP off, wont boot when on) (tried higher voltage)
R9 390X (not overclocked) (drivers reinstalled with DDU)
2xssd(Kingston) 1xhdd
Asus mg279

Log file:

More replies
Relevance 41%

I recently built a new rig and have been trying everything I can to solve a problem I am having with BSOD and random resets of my machine.
BSOD will happen during mundane tasks from simply surfing the internet or watching a movie in my cd drive. Crash dump occurs and I have to reset.
Games aren't functional either. I try to run the benchmark tester Shattered Horizon and my computer locks up often along with a screen filled with pixels.
I've run a compatibility test from the Windows 7 64-Bit website as well and it says all my parts are okay. I am at a complete loss.

I'll attach a minidump (as seems to be the trend here). Hopefully I do this right as I have never done this before or am familiar with minidumps.

System Specs:
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
Western Digital Caviar Black 1 TB HD
EVGA GeForce GTX 275
2- 2GB G.Skill Ram Sticks (both sticks have been scanned for errors and are operating fine)
Intel Core 2 Quad Q8300
Hanns G 24.6" screen

Answer:Random BSOD and Random Resets

  
Quote: Originally Posted by Tinks


I recently built a new rig and have been trying everything I can to solve a problem I am having with BSOD and random resets of my machine.
BSOD will happen during mundane tasks from simply surfing the internet or watching a movie in my cd drive. Crash dump occurs and I have to reset.
Games aren't functional either. I try to run the benchmark tester Shattered Horizon and my computer locks up often along with a screen filled with pixels.
I've run a compatibility test from the Windows 7 64-Bit website as well and it says all my parts are okay. I am at a complete loss.

I'll attach a minidump (as seems to be the trend here). Hopefully I do this right as I have never done this before or am familiar with minidumps.

System Specs:
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
Western Digital Caviar Black 1 TB HD
EVGA GeForce GTX 275
2- 2GB G.Skill Ram Sticks (both sticks have been scanned for errors and are operating fine)
Intel Core 2 Quad Q8300
Hanns G 24.6" screen


what did you use to test the memory and how long did you run it?

Let me know so I can recommend a course of action

Ken
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\U... Read more

9 more replies
Relevance 41%

Hi,

I'm new here, but I have a BSOD issue. I use Windows 7 Home Premium, but since i got the pc from a friend, I've been having BSOD issuses. I tried updating my graphics card, but this had no effect. Also, I swapped my RAM cards in different orders, but this works for only a couple of days. I have no idea what is causing all this. I attached the log file. Someone with any idea?

Thanks a lot in advance.

Answer:Random BSOD's at random moments

This looks like malware, more specifically a rootkit.


Code:
BugCheck 1000008E, {80000004, 82e5a608, a464f870, 0}

Code:
a464f914 82e5c6c8 8c81b7f8 00000160 8c81a484 nt!HvpGetCellPaged+0xe4
a464f940 82e4070b a464fc54 8c81b7f8 8c81a3c8 nt!CmpConstructName+0x96
a464f9b4 82e3e85f 8c81b7f8 a464fc18 8c81a3c8 nt!CmpGetSymbolicLink+0x1f6
a464fb48 82e35d2e 8c80a770 855b6f78 881ce8f0 nt!CmpParseKey+0x890
a464fbc4 82e46157 00000000 a464fc18 00000040 nt!ObpLookupObjectName+0x4fa
a464fc20 82e44088 7795e81c 855b6f78 898efc01 nt!ObOpenObjectByName+0x165
a464fd00 82e5c8fa 0012f950 00000003 7795e81c nt!CmOpenKey+0x1f4
a464fd20 82c4d8c6 0012f950 00000003 7795e81c nt!NtOpenKey+0x18 <-- Opening registry key
a464fd20 779370f4 0012f950 00000003 7795e81c nt!KiSystemServicePostCall <-- System call
WARNING: Frame IP not in any known module. Following frames may be wrong.
0012fb50 00000000 00000000 00000000 00000000 0x779370f4
The rootkit appears to be using Direct Kernel Object Manipulation and hiding to prevent detection.

I would use Kaspersky's TDSSKiller Anti Rootkit utility to find the virus(s)

Anti-rootkit utility TDSSKiller

9 more replies
Relevance 41%

Hi, I'm really hoping to solve the problem since it's starting to distract seriously. I think since early summer BSODs been flashing now and then and now more and more often. Naturally I've tried memory solutions found online for memory related BSODs but now the different causes seems overwhelming.
Don't have the skills to work this out so I need your help.

system:
Win 10 home 64bit (reinstalled some time ago, did help while, but not so sure how clean install that was)
asus Z-97 (should support usb3.1, some errors indicate usbxchi error)
i5-4430 (not overclocked)
Ram 8GB 1333 (XMP off, wont boot when on) (tried higher voltage)
asus R9 390X (not overclocked) (drivers reinstalled with DDU)
2xssd(Kingston) 1xhdd
Asus mg279 display

EDIT SOLVED: Replacing RAM solved these problems, no BSOD in 3 days so far (compared to 5-10/day)

Log file:

Answer:Random BSOD in random times

You said "I've tried memory solutions found online for memory related BSODs". What exactly did you try?
Did you replace the 8GB with a different one?
Have you run a memory diagnostic? Try memtest86+:
===================================================
RAM:

Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

   Information

MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

RAM will accept and keep random patterns of data sent to itThere are no errors when different parts of memory try to interactThere are no conflicts between memory addresses

Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

   Warning
MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.

If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.


   Note
MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

Running 8 passes of MemTest86+ is a long and drawn out exercise and t... Read more

3 more replies
Relevance 41%

Hello everyone,

A couple weeks ago I started having random BSOD and restarts, I have researched several different solutions to no avail. At one point, I thought the problem was solved after restoring a restore point, however, the dreaded BSOD is back after a couple of days.

So far I have:
- Restored the earliest restore point
- Ran chkdsk with no errors
- Ran full scan AV (just in case) using MSSE.
- Updated all Windows and drivers updates.

I believe this is related to a driver issue, however, I'm not sure which one. Any help would be appreciated. Attached is both the BSOD App and System Health data.

Basic specs:
- Windows 7 x64
- Original Install
- OEM
- System age: 6 months
- OS install age: 6 months (not reinstalled)

Thanks again,

Ron

Answer:Random BSOD, random codes, while using and while away.

These crashes were caused by memory corruption probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can ... Read more

1 more replies
Relevance 41%

Hello everyone,
thanks in advance for your help. I reinstalled this system twice in the past week (since I got new Hardware) and followed several guides, so I thought everything is perfect. I consider myself a fairly advanced user, but I still couldn't figure out the cause of this behaviour. This is my first steps with Win7.

Information:
- OS: Windows 7 Ultimate x64
- Originally, I built this system from scratch and XP was running on it almost errorfree for 2 years. Now I bought a new HDD and a new GPU and reinstalled Win7 upon inserting the new Hardware.
-CPU: Intel Core 2 Duo E6300 1.86GHz, never OCed
-RAM: 4x1GB GEIL 800Mhz DDR2 RAM
-GPU: ATI Radeon HD4850
-Sound Card: Audiotrak Prodigy HD2
-Motherboard: Gigabyte GA-965P-DS4
-PSU: beQuiet 400 Watt

Thanks,
Bebel

Answer:Random BSOD at random tasks (at least once a day)

How do I edit my post?

Anyway, I wanted to add, that the system is running on a RAID0 configuration of 2 WD6400AAKS. The new HDD (A Samsung 2TB HDD) is only used for Backing Up Pictures and Files.

19 more replies
Relevance 41%

Hello. I built a PC two days ago and today I have had 4 BSOD's so far and I fear there will be more of them.

Today, the 28th, I've have 4 or 5 bsods and most, if not all, have had the 0x109 stop code.

Answer:Random BSOD's at random times on new PC

Post it following the Blue Screen of Death (BSOD) Posting Instructions .

9 more replies
Relevance 41%

installed a new motherboard, new cpu, new ram, new hdd, a different graphics card, found errors on a cd drive, disabled that, and my computer still restarts randomly, like before i decided to get new hardware. automatic restart is turned off. what can i do?

mobo: mis p43-c51 (new)
tried both gf 7950gt and 8800, no difference, still problems
seagate 250 gb hdd (new)
intel q8300 2.5ghz (new)
x fi extreme gamer soundcard
ocz 600w psu
4 gigs of ocz ram pc3-8500 1066mhz (new)
latest drivers. new sata cables. temperatures ok.

please help. this is getting... quite annoying to say the least, almost replacing all hardware and still problems. thank you very much in advance.
 

Answer:random restart and random bsod

16 more replies
Relevance 41%

Hello, Im new here so bare with me I built my custom pc a year ago now. Since day one iv been experiencing BSOD. At first it happened during or just after the first boot up of that day and was always Memory Management error. Soon after, i upgraded my ram from 4gb to 8 gb. After doing this the BSOD stopped happening as frequently, but started to happen more randomly. My Bsods were very unusual, i couldnt find anything like it online, instead of the blue screen, i got a pink and blue or a green and blue screen and was very difficult to make out what it said but i could usually make out the error.
For some strange reason i started to get other errors such as IRQL_NOT_LESS_OR_EQUAL, PFN_LIST_CORRUPT, PAGE-FAULT-IN-NONPAGE-AREA, SYSTEM_THREAD-EXCEPTION and BAD_POOL_HEADER. I downloaded BlueScreenView to see what he problem was and they were nearly always caused by ntoskrnl driver and sometimes atikmdag driver. Ithen upgraded my GPU and the BSOD continued to happen but i got the normal fully blue screen and the green and blue or pink and blue screens stopped happening. I never get a BSOD during gaming, its nearly always either internet browsing or low level tasks or sometimes at boot up.I dont know if this is related but my browsers crash quite frequently too.
In the last few months i thought i had fixed the problem by fixing my ram speed because they were running at a weird speed and once i put it back to 1600mhz it stopped happening any where near as frequently. BSOD h... Read more

Answer:Random BSOD at random times

Please follow these instructions: Blue Screen of Death (BSOD) Posting Instructions

12 more replies
Relevance 41%

I am basically at the end of my rope i keep getting Bsod's

112612-29718-01.dmp 26.11.2012 6:59:58 UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`0321e2f7 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\112612-29718-01.dmp 6 15 7601 266.632
112512-23353-01.dmp 25.11.2012 16:18:25 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`03fa1e00 fffffa80`03fa1e00 fffffa80`03fe1e00 nvlddmkm.sys nvlddmkm.sys+1b0dc8 x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\112512-23353-01.dmp 6 15 7601 291.920
112412-17300-01.dmp 24.11.2012 13:14:28 DRIVER_OVERRAN_STACK_BUFFER 0x000000f7 fffff880`09bb9c20 00002444`94ed38c9 ffffdbbb`6b12c736 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\112412-17300-01.dmp 6 15 7601 292.320
112412-16458-01.dmp 24.11.2012 12:55:25 ATTEMPTED_WRITE_TO_READONLY_MEMORY 0x000000be 00000000`00040000 cfe00000`60a07025 fffff880`090224e0 00000000`0000000a fltmgr.sys fltmgr.sys+42ec x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\112412-16458-01.dmp 4 15 7601 292.288
112412-24991-01.dmp 24.11.2012 0:52... Read more

Answer:Random BSOD's at random times

I think you can now try a safe registry cleaner.Lets hope it can fix your computer.Try it and tell me what's happen Now?

10 more replies
Relevance 41%

I have recently replaced the ram in my rig (4gb ddr2 667mhz) with 8gb ddr2 800mhz and was randomly experiencing BSOD's. done some searching, and decided to "underclock" the ram to 667. this helped for a while until a recent restart of the pc. Ran memtest86+ on both speeds (667 & 800mhz) and only got errors (8) on the 800mhz speed, and not exactly sure why. I have attached a dump file (not sure if I did it correctly) to this post if its any help at all. any help would be appreciated. thanks

Answer:random BSOD's at random times

Chuck if you got errors then mate you need to get the RAM replaced - it wouldn't matter if it were one or one hundred errors the RAM is still faulty.

PS Welcome to the forum

7 more replies
Relevance 41%

Hello guys,

I'm having problem with my pc. It restarts randomly and I'm getting different errors. I run the Windbg and I still can't find the cause of the error. I also checked my hdd and memory for errors but got nothing.

I hope you can help me fix this problem.
OS: Windows 7 Ultimate (64 bit) Service Pack 1
Processor: AMD A4-6300 APU with Radeon 3.7 ghz
Ram : 4 gb

Code:


CURRENT_IRQL: 2

FAULTING_IP:
nt+a6970
fffff800`03d08970 f00fba6b1000 lock bts dword ptr [rbx+10h],0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: msiexec.exe

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

LAST_CONTROL_TRANSFER: from 0000000000000000 to 0000000000000000

STACK_TEXT:
00000000`00000000 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x0
STACK_COMMAND: .bugcheck ; kb

FOLLOWUP_IP:
nt+a6970
fffff800`03d08970 f00fba6b1000 lock bts dword ptr [rbx+10h],0

SYMBOL_NAME: nt+a6970

FOLLOWUP_NAME: MachineOwner

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

IMAGE_VERSION: 6.1.7601.17514

BUCKET_ID: INVALID_KERNEL_CONTEXT

MODULE_NAME: Unknown_Module

FAILURE_BUCKET_ID: INVALID_KERNEL_CONTEXT

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:invalid_kernel_context

FAILURE_ID_HASH: {ef5f68ed-c19c-e34b-48ec-8a37cd6f3937}

Followup: MachineOwner
Please download the dump files here.

Answer:Random BSOD. Random Errors.

Hello and welcome Iamhealed now a few things to sort out and for elimination purposes try these if you can maybe the first two in safe mode

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option 2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbish these find.

Now another thing is what are the temps in the machine run Speccy and let us know http://www.piriform.com/speccy/download
See this and let us know the results



UsingHW Info PSU

Download HW Info and pick the right bit version - HWiNFO, HWiNFO32/64 - Download - (or copy and paste this site into the search bar) If you do not need the running information in the smaller right hand panel close it. In the left hand window click on the + for the individual device groupings and they will open out to the various components.

Go on opening out further until you get to the device itself. click on it and it will highlight. In the right hand window there will be a very detailed description of that device as in brand, speeds model number etc etc These are very detailed and are just what is needed for searching for drivers etc.

To get the PSU volts you need to select the Sensor button circled in yellow in the pic for PSU testing ... Read more

8 more replies
Relevance 40.59%

Newly built PC, graphics card drivers are fully updated, using windows 7 ultimate which has SP1 installed. Posting dump file below, has multiple dumps from when i bought the PC (Dump files range over about a week)

Answer:BSOD When exiting games inconsistently + Random BSOD consistently

Is no one able to help? had 2 more BSOD since posting this

8 more replies
Relevance 40.59%

Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.

Answer:BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's

  
Quote: Originally Posted by MrRevolver


Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.


Its the directx driver, video card, power, or heat.... Read more

2 more replies
Relevance 40.59%

Hi, i got this computer about 3~ Weeks ago, and have gotten random BSOD's after that.
System Information Bellow
Intel Core i5-6600K 3.5Ghz @ 3.5
GeForce GTX960 2gb GDDR5, Physx CUDA
1TB Harddisk 7200RPM
8Gb DDR4 2133Mhz Dual Channel, 2x4gb
Asrock z170 Pro4S
600W ATX
Sharkoon VG4-W ATX

I get many different BSOD's like IRQL_Not_Less_OR_Equal, Memory_Corruption, Memory_Management, Etc.
I have been trieing to fix the problem for a good bit now, and i havn't been able to figure how to resolve the problem. But i got a feeling that it is one of the Drives, the problem is i havent got any lead to what driver it could be.

Thanks, Vikdal

UPDATE:
I Have gotten more BSOD's but now i got a Kernal_Security_Check Error May this give you guys a lead?

Answer:BSOD playing video games such as Cs:Go etc. Error, Random BSOD's

Vikdal said:

Hi, i got this computer about 3~ Weeks ago, and have gotten random BSOD's after that.
System Information Bellow
Intel Core i5-6600K 3.5Ghz @ 3.5
GeForce GTX960 2gb GDDR5, Physx CUDA
1TB Harddisk 7200RPM
8Gb DDR4 2133Mhz Dual Channel, 2x4gb
Asrock z170 Pro4S
600W ATX
Sharkoon VG4-W ATX

I get many different BSOD's like IRQL_Not_Less_OR_Equal, Memory_Corruption, Etc.
I have been trieing to fix the problem for a good bit now, and i havn't been able to figure how to resolve the problem. But i got a feeling that it is one of the Drives, the problem is i havent got any lead to what driver it could be.

Thanks, Vikdal




It usually happens

more replies
Relevance 40.59%

I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c.
Recently uninstalled all video drivers and re installed. The bsods sometimes go away for a week or two but come back. and sometimes when it bsods there is a static noise inside of the computer, and the blue screen becomes distorted
Ive attached the dump files, if someone could help me pinpoint the piece of hardware so I can ship it out for repair please.

Answer:Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static

Hi irunebar12 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
Error : DCACHEL0_WR_ERR (Proc 7 Bank 1)
Status : 0xbf80000000000124
Address : 0x0000000101d80bc0
Misc. : 0x0000000000000086


The dumps are consistent with the error that there was a problem in writing to the L0 Cache of the CPU. That is a dead CPU and hence you are getting the errors even after a fresh install.
See if you are getting any errors in Prime95 according to the below (thanks usasma) -






Prime95 download site: GIMPS - Free Prime95 software downloads - PrimeNet
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it do... Read more

3 more replies
Relevance 40.59%

Short version: My PC is getting a BSOD at random times when full screen gaming. The BSOD screen says the video card times out.

Long Version:
I have a gaming PC that a friend generously gave me when he built a new one. It's worked great, but in November the Tagan ITZ 700 watt power supply died. He had planned to do SLI and never did, so during Neweggs holiday sale I picked up a Corsair Enthusiast Series TX650 thinking it should be sufficient.

Everything has run smoothly with the new PSU except for the fact that when playing games like Torchlight 2 and Starcraft 2, my machine will BSOD. I had random BSOD's with Starcraft 2 and then suddenly had 4 nights in a row with no problems and then today it keeps crashing at the same spot in the campaign. There is little consistency to the crashes other than that and under normal operations, like email, web browsing, etc, it has only BSOD'd once and that was during a youtube video.

My first thought is that the one thing that has changed recently is the PSU and prior to that I only recall a rare crash here and there. I thought maybe my new PSU wasn't good enough, but everything I've read online about the requirements for the GTX 460, including the manual, say 450 watt minimum and I exceed that.

Here is a list of things I have tried:

- Updated video card and mobo drivers, I have also uninstalled the nvidia drivers, run Driver Sweeper in safe mode, and reinstalled drivers in normal mode.
- Ran GPU-Z to look at temperatures and ran... Read more

Answer:Random BSOD when playing games, persistant BSOD with Starcraft 2

Hello Haze.

Click Start.
In the search bar, Typr "services.msc" without quotes.
Click the resulting link.
When the windoe will appear, scroll down to "nvidea update service daemon"
Then do it:
Does it change the situation anyhow? Let us know.

9 more replies
Relevance 40.59%

Howdy all, new user here looking to isolate a blue screen problem that makes me quite sad as it's becoming rather annoying. A friend a while back (2 years-ish) solved a bsod problem with you guy's help and I thought I would do the same.

I read and followed the "Blue Screen of Death (BSOD) Posting Instructions" and have attached it to this post.

Here is a mirror download: http://www.filedropper.com/sevenforums

This blue screen occurs at random intervals it seems, the first occurrence happened about a week ago while playing StarCraft II with a friend; however, I am convinced that the blue screen happens at random because I has occurred multiple times while doing pretty much nothing, besides surfing the web.

Whenever the BSOD occurs, there is something that says "Driver IRQL_Not_Less_Than_Or_Equal" I think.

If there is anything else I can provide you fine folk in order to isolate and hopefully fix this problem, please give me a shout and I will do my best to provide it.

Answer:Random BSOD Problems, SF BSOD Utility Files Included

shameless bump

4 more replies
Relevance 40.59%

I have been having the worst time with my custom built PC since it was built. I am getting random BSOD's here and there, but there does seem to be a correlation between a greater occurence when playing games. Often I can't play a high-resolution game for more than an hour or two before I crash.

I heard a recommendation to try Prime95, and I get an insta-BSOD when doing the Blend test.

I haved tested the memory and did not see any problems.

Here is the dump report. Any help possible would be greatly, greatly appreciated. I unfortunately am under the suspicion that this is a CPU hardware error and the CPU will have to be replaced, but I do need some form of help or confirmation before I take the next step RMA'ing it.

Sys Info: Intel i7 920, 6gb OCZ DDR3 1600 RAM, ATI Radeon HD4870, Asus P6T Deluxe V2, Win7 64.
Hardware is about 2.5 years old. OS Installation is less than a year old.
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\111811-22339-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c53000 PsLoadedModuleLi... Read more

Answer:Daily BSOD's, some random, some during gaming (Prime95 Insta-BSOD)

Here are the missing JCGriff2 and perfmon files. Again, any help in regards to this problem I am having are tremendously appreciated. I can fix near anything with a computer, debugging this deep however escapes my knowledge and I don't know who else to turn to.

Note there are four dumps from today. 2 were while playing Skyrim. 2 were while testing Prime95 on Blend mode, insta-crashed within seconds.

8 more replies
Relevance 40.59%

Hello guys and i need help with this BSOD

it seems that when i watching youtube videos i get a lot of BSOD

here are my dmp files hope you guys can help me! Thanks!

Answer:BSOD Watching Youtube videos or just random BSOD

bump

9 more replies
Relevance 40.59%

Attachment 359866

Been having this problem for months now. Not sure if it's the same BSOD. My old Win7 wasn't creating dump files of any kind. Followed instructions to correct that and it didn't help.

Computer was BSOD seemingly when connecting/disconnecting my TV to my PC via HDMI. But sometimes BSOD would happen seemingly at random.

Swapped out Asus z87-PLUS with Gigabyte GA-Z97X-UD5H. Kept other hardware. Reinstalled windows after reformatting the SDD/C drive. It's been 48 hours and computer locked up with a BSOD 30 minutes ago. Active applications at time of BSOD were Chrome, Windows Explorer and Doom/Unleashed.

What other information would help?

Thanks to anyone to can lend a hand.

Mike

Answer:Random BSOD, new mobo, Win7 reinstall, still BSOD

You need to install a genuine copy of Windows. Yours has a DELL PID on a retail Gigabyte motherboard.
Code:
Host Name: BLANKPCIPPY
OS Name: Microsoft Windows 7 Professional
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Michael
Registered Organization:
Product ID: 00371-OEM-8992671-00524 ---> DELL PID
Original Install Date: 5/20/2015, 5:36:25 AM
System Boot Time: 5/22/2015, 12:01:34 AM
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z97X-UD5H
System Type: x64-based PC
Counterfeit installations such as yours can contain heavily modified code that can cause the installation to behave it unexpected ways. Analysing BSODs and determining their causes on these sorts of installations is completely unreliable, and for this reason most analysts won't attempt it.

My recommendation is to install a genuine copy of Windows 7. This will minimise the problems you are experiencing and make subsequent diagnosis of BSODs far more reliable. Once you are running a genuine Windows 7 installation and are still experiencing BSODs, upload your new logs we will be happy to help you solve them.

1 more replies
Relevance 40.59%

First of all sorry for my bad english. Everyday that i use the pc i have a blue screen. If i use games mostly dota 2 it crashes sooner. The funny thing is after bsod i try to start the pc again but computer freezes at windows logo. Then i have to power off and wait ~ 20 minutes because if i start it sooner it freezes and will never go to windows startup repair. If i wait i will use startup repair and the pc will start until it crash again 10min to even hours its random. I also noticed if after bsod i immediately try to open bios the pc freezes after 2 seconds and cant do nothing. I am pretty sure after the freeze on bios that its a motherboard problem. I cant stand it anymore (happens for months but the last weeks extremely often)so enlighten me whats the problem and if i change something ( maybe buy a new motherboard) the pc will be running smooth again. Parts are old 5 years old motherboard + cpu . Ram and gpu are 2.5 years old.
Windows 7 Amd athlon 64 x2 4200+ Amd 5770 Asus m2n sli deluxe 2x2 gb crucial balistics 4 gb ddr 2
Hd i have used 2 with the same bsod

Answer:Random BSOD extremly often and bios freeze after bsod

1.Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2. Please run the System Update Readiness Tool (SURT) and then update to SP-1

32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

9 more replies
Relevance 40.59%

Hey all, some of you might remember me from a long post a few months ago about random but frequent BSODs. After a long and grueling troubleshooting process (shoutout to essenbe and axe0 for being super helpful) I found that my motherboard power cable was loose inside the case. Embarrassingly but also thankfully, I thought I'd resolved the issue and I ran into no troubles for a while. But, it looks like my computer won't have that. A few weeks ago I ran into a random hardware issue BSOD, it was pretty traumatizing because I thought I'd have to go through the huge process from before all over again but I decided it was just some one off thing and did nothing about; then, it crashed again yesterday. So, I decided to open the case and make sure all the cables were in place which I did and they were. Now however, I just had ANOTHER crash. So, I'm pretty upset and hope its something easily identifiable so I can fix this damn machine. Anyways, DM log is attatched, should I run memtest overnight? I was considering it before but I forgot about it. Anyways, hey again guys, hope you've all been well and hope I can get some help

Attachment 86499

Answer:The Revenge of the BSOD - Random BSOD Strikes Back

I would definitely run memtest86+ overnight. Today's crash dump shows possible memory corruption:


Code:
BugCheck A, {0, 2, 0, fffff801b66ed59d}

Probably caused by : memory_corruption ( nt!MiCaptureProtectionFromLockedProto+21 )

16 more replies
Relevance 40.59%

Hi,

I'm trying to help my aunt with here computer. She has been having random BSODS for a while. Been running RAM Checks, disk checks, plugged out GPU, checked temps, disconnected everything except the hard-drive. Been scratching my head for a while.

I ended up formating the computer, and it seemed to solve the problem for a couple of weeks.

But yesterday she gave me a call telling me that it had started again.
I'm thinking it could be a driver problem. I ran the computer for a couple of days at work, without experiencing any problems. I know that she has installed a couple of things when she got it back.

She told me that she was browsing an online newspaper in firefox one of the times the BSOD appeared.

Would be great if anyone could take a look at the logs attached.
Thanks in advanced :]

Answer:BSOD at random. Last BSOD while using Firefox. Error 0x0000000a

Is there any antivirus installed on this computer? I see none
Run this tool and delete anything it finds:
→ Anti-rootkit utility TDSSKiller

Where was this copy of windows 7 enterprise purchased from?

You might want to update the BIOS, the current ones are quite old

Code:
BIOS-versjon/-dato Phoenix Technologies, LTD 5.13, 19.03.2008

9 more replies
Relevance 40.59%

Hey I have a problem with my pc I got a few weeks ago It keeps getting the bsod and turning on and off randomly at times I use it mostly to play games and watch youtube , twitch ext.

also internet can sometimes crash pointing this out

Bsod can happen when playing a game and when on the web sometimes it wont even show the blue screen and will just restart

sometimes it can run hours without any problem

I don't know if I'm installing drives worng for my card but its getting to the point where im going to lost it
I have tested
Ram tested did 2 passes

hope you guys can help

(More Bsod updated)
(even more updated)

Answer:BSOD When playing games random Bsod messages

No Windows Updates installed. Most systems have 70 to 140 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available (and didn't experience any errors).

You have a 802.11n USB Wireless LAN Card:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later systems - using older drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have the latest Win8/8.1 drivers - DO NOT use older drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



This device is disabled. Is this deliberate? If so, why?





Multiple Card Reader USB Device USBSTOR\DISK&VEN_MULTIPLE&PROD_CARD__READER&REV_1.00\058F63666438&0 This device is disabled.



Please enable the device and then ensure that it's drivers are fully updated to the latest, Win8.1 compatible version. Then feel free to disable it again if you'd like.

Out of 14 memory dumps there were 8 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
-... Read more

9 more replies
Relevance 40.59%

Hi,

Over the past couple of days I have been having reasonably frequent BSODs. Some have not created a dump file. I cant pinpoint anything in particular but it seems to be pointing to a driver issue but never identifies the driver from what I can tell. Hoping someone can see more.

The only behaviour which has accompanied this recently is Chrome tabs crashing, and the computer seemingly hanging for a few seconds at times, usually right before a BSOD.

Windows did install a driver for my ATI Radeon 200 series graphics yesterday but by this time there were already a few crashes. I have also downloaded and installed the latest drivers from ATI's website; and the computer BSOD'd when it restarted after this (should be the final BSOD in the zip).

I have attached the required zip to this post.

Thanks

Answer:BSOD Seemingly Random when using PC normally. Variety of BSOD errors

Hello, mickmok. I have looked at your dump files and I am not seeing one particular thing that is the cause. This is what I have found.


Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff6fb40000000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: 0000000000000000, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000006, (reserved)


Code:
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041201, The subtype of the bugcheck.
Arg2: fffff6bffd167790
Arg3: 6560000082285025
Arg4: ffffe00035836060
Debugging Details:


Code:
ffffd001`9ce1b178 fffff800`58d3f720Unable to load image \SystemRoot\system32\DRIVERS\avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0x1f720

That is your AVG Anti Virus


Code:
Use !analyze -v to get detailed debugging information.
BugCheck 100000EA, {ffffe000adf3c080, 0, 0, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused b... Read more

3 more replies
Relevance 40.59%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004B46038
BCP3: 00000000B6200049
BCP4: 000000000102010A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\062110-18969-01.dmp
C:\Users\noel doyle\AppData\Local\Temp\WER-43227-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004B46038
BCP3: 00000000B6200049
BCP4: 000000000102010A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\062110-18969-01.dmp
I created windows sky drive for the minidump files
http://cid-65375d43ed339adf.office.live.com/browse.aspx/crash information

 

Answer:BSOD BCCode: 124 apparently random BSOD doing all different activity

I had the same problem after upgrading my laptop (touchscreen) from Win Vista (which came from HP) to Win 7 (both were 64-bit.)

Removed the "Authentica Digital Fingerprint Reader" software, and used the built-in Win7 drivers, and that cleared it up for me. Not sure if it was a bug in the 3rd party drivers, or a conflict between them and the Win7 drivers, but I haven't gotten a BSOD since I removed it.
 

1 more replies
Relevance 40.59%

hi.
my laptop started to bsod after power failure.
since then my laptop got random bsod.
after bsod i cant startup my laptop.
need to wait about 1-2 hours to boot.

laptop specs:
intel i7-3610QM
nvidia geforce GTX 660M/2gb DDR5
RAM 8GB DDR3
HDD 750 gb 7200 rpm

i need some helps

thanks

Answer:BSOD after playing games + Random BSOD on startup

Welcome

Your dumps don't have a probable cause, keep blaming windows files (Not true causes)

Since everything was fine with the laptop before the power failure, your best bet would be to dismantle and reconnect all the hardware components (if you're good with it) and do a fresh install of windows on your laptop

Fill in your specs and the make of the laptop
__________________
Click on User CP on the top right of this page
Click on Edit System Spec
Fill in your computer specs
→ System Info - See Your System Specs
__________________

See if any of these tutorials are helpful to you
→ Troubleshooting Windows 7 Failure to Boot
→ Troubleshooting Steps for Windows 7
→ Clean Install : Factory COA Activation Key
→ Clean Reinstall - Factory OEM Windows 7
→ Clean Install Windows 7
→ SSD / HDD : Optimize for Windows Reinstallation

Good luck

3 more replies
Relevance 40.59%

Hi All

Have been following a number of threads to identify my issue. I can only assume that a driver is at fault as when i run verifier i have to start in safe mode. Attached is my mini dump, can anyone help me identify where the issue is?

Thanks a lot

Lordmwa

EDIT - Added the full lot of info from the diagnostic tool

Answer:Random BSOD, ran driver verifier now got 0x000000c9 BSOD

Hi lordmwa.

It appears that you have driver verifier enabled. And the verifier detected the Logitech Camera driver, twice, in two crash dumps.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {6, 103, fffff98005bb4870, 0}

*** WARNING: Unable to verify timestamp for lv302a64.sys
*** ERROR: Module load completed but symbols could not be loaded for lv302a64.sys
Probably caused by : lv302a64.sys ( lv302a64+15e1 )

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`06b6c000 fffff880`06b6e400 lv302a64 T (no symbols)
Loaded symbol image file: lv302a64.sys
Image path: \SystemRoot\system32\DRIVERS\lv302a64.sys
Image name: lv302a64.sys
Timestamp: Fri May 01 04:11:07 2009 (49FA2903)
CheckSum: 0000515F
ImageSize: 00002400
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
First, disable Driver Verifier. Then update the logitech drivers from Logitech Support - Downloads, Manuals, FAQs & More.

It is a Desktop PC, and magicISO is not a must for it. I w... Read more

4 more replies
Relevance 40.59%

I believe there may be more than one issue with my pc.

Recently I bought 16 gb of new ram and an ssd I installed the ram ssd and a new install of Windows on the ssd all was going fine until randomly the pc would freeze up, randomly reboot or get a bsod.

I figured it might be ram and tried memtest86 and windows memory diagnostic and it was freezing on hammering rows and locking up on windows memory diagnostic. I removed the new ram and all seemed fine memory tests ran without issue, so I figured bad ram until today when I randomly got a bsod for the above reason.

Other BSOD I have had have pointed towards Memory Management issues which I figured was down to the ram.

Any help would be greatly appreciated as I would like to nail down if the issues were linked and possible a motherboard issue or is it just a coincidence and a lot of bad luck

Thank You.

Chris

Answer:Random BSOD last bsod points to atikmdag.sys 0x000000d1

It is pointing to the ATI Graphics drivers. Upgrade it.

5 more replies
Relevance 40.59%

Hello fellas! It's now like 1 year, that im having troubles with my computer. I had really many patience with it, tried really anything i could but now im done with my nerves and asking you to help.

Problem: Many different BSOD's + sometimes PC just Shutdown as if i took out the power cable. And it freeze sometimes untill i reset it - The picture freezes, sound stopped, nothing changes even with ctrl + alt + del. The Windows System Logs are full with Criticals, Errors and Warnings. They occur randomly, not just while im playing 3d Games but even without any programms running.

Since i bought that custom hardware im having those BSODS, Shutdowns etc sometimes 1x a week, sometimes 10x / day for many days in a row. I guess it's a Hardware failure, because i tried like 20+ Windows reinstalls. Diferent Versions of Win7, with same bad result.

I've bought those parts:

x6 Phenom Processor with silent Cool Fan
500W power supply
ASUS M4A88TD-V
Radeon HD 6900
2x 4GB Ram with passive cooling
2x 1TB WDC SATA

1. What i already tried:
a. After like 1 year i asked the seller to help out. He replaced following hardware: motherboard, power supply, graphic card. It didn't helped.
b. I tried to remove 1x RAM, then tried only with the other one
c. Installed windows on different Harddrives
d. Defragmented harddrives
e. updated drivers, ran many "optimizing" tools (btw. they destroy only the system instead to improve it mostly)
f. removed the dust, cleaned th... Read more

Answer:BSOD 0x00000124, A0000001 and random Shutdowns without BSOD

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also the MSINFO32 you uploaded it corrupt. So upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
BTW, a stop 0x124 is a hardware issue, and you may follow Stop 0x124 - what it means and what to try. ATM cannot suggest anything more due to lack of data.

And a stop 0xA0000001 is associated with ATI/AMD display driver; inbuilt and inherent in it. If this error is followed by a driver update, try to Driver Rollback. If it is taking place irrespective of the driver version, change the GPU.

8 more replies
Relevance 40.59%

Hi, i'm new to this forum and i hope you guy can help me

So my laptop is relatively new, it's not even a month old. I guess i've been downloading a lot of stuff that caused this error. Now, i'm not a computer expert or any type of expert, so please bear with me

Before i go on, here are my specs:

Intel core i7-3517u 1.9 ghz (4 cpus), ~2.4ghz
4gb ram
nvidia geforce gt 635m 2gb (also intel HD 4000 1.6gb)
I have no idea how to get the name of the motherboard.

So this BSOD that states driver IRQL not less or equal netio.sys keeps happening to me at least once a day. The longest i've been having without it is actually almost a week, i thought it was fixed by then but it came back again yesterday. It's pretty random and unpredictable, also annoying. I hate having to restart when im in the middle of a video, a download, a game, anything.

When i did the "grab all" test it came up with 2 folders, so i'm just gonna upload both.

Thanks very much for your help

Answer:BSOD IRQL not less or equal. Random BSOD crashes?

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

You have both Avira and McAfee installed. Please do this:





Anti-Virus Removal:
Please do the following:
- download a free anti-virus for testing purposes: Free AntiVirus If using Windows 8, enable Windows Defender and the Windows Firewall instead.
- un-install the McAfee from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of McAfee using this free tool: How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR) (This link has changed a lot. If it doesn't work, search... Read more

12 more replies
Relevance 40.59%

Hey all, some of you might remember me from a long post a few months ago about random but frequent BSODs. After a long and grueling troubleshooting process (shoutout to essenbe and axe0 for being super helpful) I found that my motherboard power cable was loose inside the case. Embarrassingly but also thankfully, I thought I'd resolved the issue and I ran into no troubles for a while. But, it looks like my computer won't have that. A few weeks ago I ran into a random hardware issue BSOD, it was pretty traumatizing because I thought I'd have to go through the huge process from before all over again but I decided it was just some one off thing and did nothing about; then, it crashed again yesterday. So, I decided to open the case and make sure all the cables were in place which I did and they were. Now however, I just had ANOTHER crash. So, I'm pretty upset and hope its something easily identifiable so I can fix this damn machine. Anyways, DM log is attatched, should I run memtest overnight? I was considering it before but I forgot about it. Anyways, hey again guys, hope you've all been well and hope I can get some help

DESKTOP-3J44RS5-Thu_06_23_2016_150541_45.zip

Answer:The Revenge of the BSOD - Random BSOD Strikes Back

I would definitely run memtest86+ overnight. Today's crash dump shows possible memory corruption:


Code:
BugCheck A, {0, 2, 0, fffff801b66ed59d}

Probably caused by : memory_corruption ( nt!MiCaptureProtectionFromLockedProto+21 )

0 more replies
Relevance 39.77%

Hallo,

every couple of days I get a BSOD. Mainly while leaving the pc unused at night. For detailed informations see minidump-files below.
Furthermore the PC doesn't autmoatically restart (even it is activated in system properties / advanced / startup and recovery). This is insofar very annoying that I cannot continue connecting via remote before I haven't restarted the pc manually...

Does anybody have a solution? I already tried reg-cleaning, sfc, crc and memtest86 checking.

Thank you in advance!
Max

Answer:Random BSOD Errors / Restart after BSOD

Uninstall OpenVPN and all MSI software from your system. Update Audio drivers as well. Disable nVidia Streaming Kernel service in services.msc

Code:
MBfilt64.sys Fri Jul 31 05:40:32 2009 (4A7267B0)
Realtek HiDefinition Audio driver (file labelled as Creative Audio Driver) - Was found in the latest Win8 version available from Realtek on 07Sep2013
http://www.carrona.org/drivers/driver.php?id=MBfilt64.sys

tapoas.sys Mon Jul 12 02:31:59 2010 (4C3A627F)
OpenVPN Virtual Network Driver
http://www.carrona.org/drivers/driver.php?id=tapoas.sys

NTIOLib_X64.sys Wed Oct 20 08:45:49 2010 (4CBE901D)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5 & MSI Super Charger[br] [br] Recently (Nov 2014) there have been numerous instances of this driver in memory dumps. Analysis reveals that they are scattered throughout the filesystem by the installed MSI command utilities. For now I suggest uninstalling them all.
http://www.carrona.org/drivers/driver.php?id=NTIOLib_X64.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

ISCTD64.sys Tue Nov 27 20:52:34 2012 (50B51A02)
Intel Smart Connect Technology Driver
http://www.carrona.org/drivers/driver.php?id=ISCTD64.sys

sfnq.sys Tue Aug 6 00:33:54 2013 (52002852)

sfnq.sys - this driver hasn't been added to the DRT as of this ru... Read more

9 more replies
Relevance 39.77%

Hello,

yesterday I got two strange BSOD-s. Got first one when I was playing BF3 and second one when I was restarting my system and right before the system went to restart. The error codes were both the same I think.
Could somebody check my dumps out and tell me which driver or hardware gave me those bsods.

Thanks!

PS. System specs are in profile. Unfortunately I got kernel memory dumps.

Answer:BSOD playing Battlefield 3 and one random BSOD

  
Quote: Originally Posted by AeroZ


Hello,

yesterday I got two strange BSOD-s. Got first one when I was playing BF3 and second one when I was restarting my system and right before the system went to restart. The error codes were both the same I think.
Could somebody check my dumps out and tell me which driver or hardware gave me those bsods.

Thanks!

PS. System specs are in profile. Unfortunately I got kernel memory dumps.



these were Related to Lycosa.sys Tarantula Keyboard Driver from Razer USA Ltd. I would re-install newest version

4 more replies
Relevance 39.77%

Attachment 272276Hi,

I have been having alot of issues with BSOD and i went to reformat my PC thinking it will solve everything. But it didnt, now its have BSOD MEMORY_MANAGEMENT and alot of random auto shutdowns. I cant update my windows when the windows update is trying to update anything relate to NET.framwork. i've attached the minidump files. please help me.

Answer:BSOD Memory_Management and random crash without BSOD

Please follow - Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 39.77%

Sorry for the horrible title but I'm not sure on what's wrong with it now, Like I said it was fine for a good while but today the Sht hit the fan and BSOD after BSOD and only just stabled now, if anyone could give me a hand on what's wrong I'd greatly appreciate it.


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1a
BCP1: 000000000000888A
BCP2: FFFFF8A007C00920
BCP3: FFFFF6800001BC7B
BCP4: FFFFFA80030C1380
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\091012-18501-01.dmp
C:\Users\Serioushamster\AppData\Local\Temp\WER-44694-0.sysdata.xml

Answer:Random BSOD after a long time without BSOD.

Hello Tony.

Can you Re-Upload your MSINFO32 file please? It is not opening properly.

Almost All the dumps indicate Bugcheck 1A, that is probably caused by Device Driver and Memory.

► Test your RAM modulrs:
RAM - Test with Memtest86+

► Stress test your CPU:
Hardware - Stress Test With Prime95

► As there is a Pool Corruption Error, it is better to enable Driver Verifier.
Driver Verifier - Enable and Disable

Let us know how these went.

5 more replies
Relevance 39.77%

OS: Win 7 Ultimate 32 bit (no sp)
been running this os for 2 to 3 years
my hardware is about 4 years old
my specs:
Core 2 Duo E8400 CPU
2x2gig Team Elite DDR2 RAM 1066
Gigabyte EP45-DQ6 motherboard
1GB Powercolor HD4870 PCS+ video card
Corsair HX620 modular power supply

i see atikmdag.sys as the one causing issues... most of the time
i alrady tried to reinstall my display drivers a lot of times but that didnt help
also tried driver cleaner/sweeper no good...

i often get BSOD when using the seekbar while watching any kind of videos (HD/SD). Sometimes i do experience them while playing games and surfing the net.

i have attached the dump files that my system has generated.
hoping that someone can help me here

Answer:Random BSOD and BSOD when seeking Videos

First you have drivers from as far back as 1996. They may be contributing to the video crashing described below

You also should update to SP-1, ASAP.

Code:
giveio.sys 4/3/1996 10:33:25 PM
PQNTDrv.SYS 5/5/2004 11:48:39 PM
npkcusb.sys 12/27/2004 1:10:18 AM
speedfan.sys 9/24/2006 9:28:47 AM
mdvrmng.sys 5/28/2007 10:37:13 AM
PxHelp20.sys 3/12/2008 9:57:44 PM
000.fcl 9/26/2008 9:11:12 AM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
Driver Reference Table





Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressi... Read more

7 more replies
Relevance 39.77%

Hello everyone. Recently I have experience BSODs (screenshot attached), as well as dump file.

Before it would randomly lock up, BSOD, and turn off. I could not think of anything I was doing pattern wise, it would just BSOD. Today, when using Chrome, about 4-5min into the session I would get the "Chrome has crashed" prompt, then the BSOD.

Any help would be immensely appreciated!

Thank you.

Answer:Random BSOD, evolved into BSOD when using Chrome.

Hello MobiusPC and welcome.

Have you checked for a firmware update on your SSD?

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\admin\Downloads\MOBIUS-PC-Wed_10_29_2014_193816_80\102914-5740-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c9d890
Debug session time: Wed Oct 29 22:03:20.902 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:59.260
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detai... Read more

9 more replies