Computer Support Forum

H5321GW didnt have proper signed driver for Windows Server 2016. Why?

Question: H5321GW didnt have proper signed driver for Windows Server 2016. Why?

H5321GW didnt have proper signed driver for Windows Server 2016. Why? On windows 10 the driver is working (Version 8.2.5.0 from 6/11/2015), i saved and pushed into the Windows Deployment System, but after under Windows Server 2016 didnt work, because of signature missing. When will be available updated driver for the mobile broadband?? .... And Bluetooth connect to PAN also dont have. (BTH\MS_BTHPAN)


























H5321GW.JPG ?73 KB

More replies
Relevance 100%
Preferred Solution: H5321GW didnt have proper signed driver for Windows Server 2016. Why?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 74.21%

A recent cumulative update for Exchange 2016 was intended to add support for Windows Server 2016. But, after numerous reported issues, Microsoft has acknowledged a problem exists.

According to the release notes?

If you attempt to run Microsoft Exchange 2016 CU3 on Windows Server 2016, you will experience errors in the IIS host process W3WP.exe. There is no workaround at this time. You should postpone deployment of Exchange 2016 CU3 on Windows Server 2016 until a supported fix is available.

Once again, Microsoft?s testing of its own patches seems to have taken a backseat to accelerated release deadlines.
 

More replies
Relevance 71.34%

I went to install Windows Server 2016 on my Gigabyte 7PESH3 system, which is housed in a Supermicro 4U or pedestal SC747-1400B-TX chassis and I still cannot get an Operating System installed with this system. When I attempt to do so during create partition with the Windows installer after loading the driver by clicking load driver, browse, USB Drive(C, Windows 10 and Server 2016 Raid Driver Folder, starport64, and either Areca Starport-64 SATA RAID Host Adapter or Areca Virtual S/8I RAID Driver it still can't find the drives.

I have a similar problem with Linux except with Linux it's supposed to automatically find the driver on the USB flash drive for the most part and it can't because I don't know where to put it and no Linux distro tells you how or where to put it in the documentation, but instead just tells you how to do software RAID and that doesn't help. Also, everyone on here just tell me RAID just complicates things and that's not helping either. Therefore, basically I have about a 3000+ dollar 4U server that I can't use or get any use out of because I can't get a server operating system installed on it. Can anyone help or do I need to try Microsoft's forum about Windows Server 2016 and the appropriate Linux distro forum for help with the appropriate Linux distro.
 

Answer:Why can't Windows Server 2016 find the hard drives after loading RAID card driver?

Is it a nice new shiny driver from the manufacturers' website or off a disk that came in the box?
 

1 more replies
Relevance 70.11%

Cumulative Update for Windows 10 Version 1607 and Windows Server 2016: December 9, 2016

Summary
This update includes quality improvements for Windows 10 Version 1607 and Windows Server 2016. No new operating system features are being introduced in this update. Key changes include:
Improved the reliability of mobile device management (MDM) disenrollment, Distributed Component Object Model (DCOM), Peripheral Component Interface and PowerShell.
Addressed issue that causes excessive battery drain if you have a Chinese Input Method Editor installed and use Windows Hello to log in.
Addressed issue with OLE drag and drop that prevents users from downloading a SharePoint document library as a file.
Addressed issue with Super Floppy-formatted fixed media devices that are not recognized by Windows 10 Anniversary Update or accessible in Windows Explorer.
Addressed issue that causes the System Center Configuration Manager (SCCM) client to fail installation when a device is re-imaged using the SCCM task sequence.
Addressed issue that causes the loss of optional component (OC) state information, including all Hyper-V virtual machines, after upgrade.
Addressed issue that causes Windows Explorer to display information that?s inconsistent with what?s stored on the Floppy disk.
Addressed issue that, after connecting a shared CD/DVD-hosted drive with no media inserted, causes some of the commands, like DIR and NET USE, to hang.
Addressed issue where customers cannot use directory cache siz... Read more

More replies
Relevance 69.7%

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

More replies
Relevance 68.06%

Hello,  I know that this is a well known issue however I still can't seem to solve it I have Windows 10 and my system is up-to-date however the mobile broadband driver doesn't workEven though I downloaded and installed the latest driver, in device manager it shows the following:  The drivers for this device are not installed. (Code 28)There are no compatible drivers for this device. I tried to change the compatibility to windows 7 and windows 8 but it still doesn't work Please advice RegardsAli Elmeshmeshy













Solved!

Go to Solution.

Answer:ThinkPad X1 Carbon Type 3460 - Ericsson N5321gw / H5321gw Mobile Broadband Driver for Windows 10

Hi and welcome, ameshmeshyIf modem is exact H5321gw check out current modem firmware installedhttp://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-......and drivershttp://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-...Anyway, what wwan device name do you see in the Device Manager, under Network adapters category? Or whether it looks as an Unknown device in the Other devices category?

9 more replies
Relevance 63.55%

I have been trying now to install drivers for my Panasonic Digital Camera, which installs itself as a ZIP drive (it uses a 3.5 100MB ZiP disk instead of memory cards), and Fusion Dazzle which is an analog to digital convereter. Both plug in via USB. They used to work perfectly until I had to reformat and reinstall Windows on my computer.

I now get an error message that it is missing certain files (which ARE on the system) and it is looking for "C:\PCLEUSB.drv". When I point it to the correct driver location I get an error message saying that this driver has not been digitally signed to be compatible for Windows XP and will now exit installation.

I am using the most current drivers from the manufacturer and they say that they are Windows compatible and I am the first to have this problem. So far, they have been unable to assist.

Any suggestions?
Ed
 

Answer:Driver not Windows XP signed

usually the program will ask you if you want to continue, I have never experienced where it just "exited" on it's own. I always continue regardless but it is up to the user.
 

2 more replies
Relevance 63.14%

Ericsson H5321gw/C5621gw/N5321gw Mobile Broadband for Windows 10 (32-bit, 64-bit), 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - ThinkPad I have tried i install this driver + firmware. Does not work. Still uninstalled open in device mgr....

More replies
Relevance 63.14%

Hi there, Has anyone else had issues using the 8.0.X.X series of drivers under Windows 8 on their H5321gw WWAN ? On resume from sleep the WWAN card sometimes doesn't work - also whilst roaming in a foreign country the connection keeps throwing up that the APN is invalid.I know it is these drivers because if I uninstall them and install the 7.2.5.4 Windows 7 drivers then everything works as expected. (This laptop never shipped with 7.X drivers as it was a Windows 8 X1CT) I'm not sure if there's much point in me banging on about it because I doubt anything will get done but the 8.0.9.3 and earlier 8 series drivers seem to be a bit of a mess, they don't reconnect to your manually selected network - they drop out from time to time, and I've ended up having to use Series 7 drivers to get everything working ok. If anyone else has been having trouble with the Windows 8 specific drivers it would be good to know that I'm not the only one.





DangerMouseCurrent Machines : X1-3460/X1-20BS

Answer:X1 Carbon H5321gw 8.0.X.X Driver Series Faulty

Anyone else gonna throw some experience in on this one ?Would help me to understand why I have to revert to the 7.2.XX series of drivers.





DangerMouseCurrent Machines : X1-3460/X1-20BS

9 more replies
Relevance 62.32%

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale  USB to install  ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

More replies
Relevance 61.91%

help !!!! i was uninstalling what i thought were unimportant stuff & accidentaly uninstalled my sound manager can anyone tell me where i can find a Windows XP digitally signed Realtek AC?97 driver

Answer:help i need a Windows XP digitally signed Realtek AC’97 driver

Hi mate,
check what make/model is your Motherboard, visit manufacturers web site and download sound driver for that type of Motherboard...

2 more replies
Relevance 61.91%

Hi

The last few times I started my computer, the system comes with the warning:

"Windows requires a digitally signed driver
Driver: Broadcom NetDetect Driver
Service: BASFND
Publisher: Broadcom Corporation
Location: C:\Program Files\Bra...\BASFND.sys"

Windows suggests to uninstall the program or device that uses this driver and check the publishers support site to get a digitally signed driver.

The problem is that I have no idea of which program or hardware is using this driver. All the drivers I have installed in my computer are from the computer manufacturer.
I have also been at Broadcoms homepage and there is plenty of things to download there. But I dont want to ruin anything.

Suggestions on what to do?

System: Windows Vista 64
 

Answer:Windows requires a digitally signed driver

Broadcom is your onboard ethernet, I don't see why it would suddenly complain unless there was an update.:confused You can disable driver signing but it only cures the symptom and not the cause.
 

2 more replies
Relevance 61.91%

I recently purchased a new pc that came with win vista 64 bit premium home installed. I am now reloading all my old programs and I keep getting ?windows requires a digitally signed driver" error message. I also can't seem to play my old movie files, all of which played fine when I had Win XP. Apparently Vista does not want me to make my own decisions, so I am wondering how I might go about disabling all this extra secure vista crap. Can I go into Control panel and disable the BitLocker Drive Encryption? Or do I need uninstall 64bit and install the Vista 32 bit? Would that be a smooth transition? Would all my stuff work again if I had the less securitized 32bit Vista? Thanks for any help you may provide.
Regards,
William

Answer:windows requires digitally signed driver

Welcome to the Vista forums

1) You don't want to disable UAC (User Account Control) as it does a lot to protect your computer from various malware. If you really feel the urge to turn it off, then you can in control panel in the User Account section. Once turned off, you'll get the red shield in the bottom right saying it's disabled. Disable security warnings by opening security centre and going to "change how security centre warns me" or something and choose the "no warnings" option.

2) Just download the Vista codec pack (just Google it and you should find it) and DivX and you should have no problems watching videos.

3) You can install unsigned drivers on Vista 64 bit, do this by running an elevated command prompt (right click on command prompt in Start menu and click "run as administrator".

Type this and press enter bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

When you reboot, you should be able to install unsigned drivers.
Also, I looked on the HP website for your computer, and it has 6GB RAM, so going to Vista 32bit would only allow you to use about 3.5GB RAM. I also saw it only has an Nvidia 6150e onboard graphic card. Are you using this? As if you upgraded this to a graphic card, you'd notice better performance on Vista as well.

2 more replies
Relevance 61.91%

is it necessary to sign driver in win xp 32 sp2.

when i google i got that it is necessary for win vista , win7 and other upper version.

Answer:windows require a digitally signed driver xp 32 sp2

A signed driver is not necessary in Windows. It is an extra security layer, as drivers can become corrupt by malware. If you obtained the driver from a trusted source (like the device manufacturer's website), you can go ahead and tell Windows to install it.

3 more replies
Relevance 61.91%

If you have a computer that is running Windows 7 or Windows Server 2008 R2 and you install a driver that has a Windows Hardware Quality Labs (WHQL) or Authenticode signature on the computer.
But in Device Manager, when you expand the corresponding device, right-click the driver, and then click Properties and then click the Driver Details button on the Driver tab, you may find that the driver file is displayed as unsigned! This issue occurs because of incorrect logic when the Authenticode flag in the catalog file of the driver is checked.
To fix this issue download and apply this hotfix from KB2619914.

More replies
Relevance 61.5%

Windows Vista x64 decided to implement a 'security measure' by which all drivers must be 'digitally signed' to be allowed to install and run. I have a program which is compatible with Vista and x64 bit operating systems, however as its drivers are not digitally signed I cannot run it correctly - I recieve the message 'Windows requires a digitally signed driver' and access to the driver is blocked.

Is there a method of bypassing this?

Answer:'Windows requires a digitally signed driver' - How can I bypass this?

When you boot your system hit F8 and you can bypass it there. You will have to do this every boot. There are a couple applications out there that will do this for you but the names escape me right now.

4 more replies
Relevance 61.5%

Hello,
I'm at my wits end. Anyone who can help would be my hero.

Acer 5253 laptop, Win7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything.

Logitech does not furnish drivers for Win7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse.

Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, ... Read more

Answer:Windows mouse driver files not digitally signed

Mike

Obviously many more problems than just the mouse driver.

You can use earlier drivers (ie from vista, or even XP) if you install them in compatibility mode
[right click the installer>properties>compatibility>chose OS]

The other system problems need a repair install.

4 more replies
Relevance 59.86%

I had installed On my  ThinkPad T530 2429-AQ9 the Ericsson H5321gw/C5621gw Mobile Broadband Driver.But it won't apear in the device manager. Does someone has a clue??

Answer:ThinkPad T530 2429-AQ9 Ericsson H5321gw/C5621gw Mobile Broadband Driver issue

HiAre you sure wwan card is in your laptop?Laptop you have isn't being produced with wwan card installed. Did you install it yourself?

1 more replies
Relevance 59.45%

I bought a pc without os installed, then bought an oem server license, where do I get the activation key from?

More replies
Relevance 59.45%

Have any of you test drove it yet? I spun it up in my virtual lab but I haven't dug deep yet.
 

Answer:Windows Server 2016

No more Action packs in budget

I'm curious how much 'Linux' is in it. I'm also curious about its remote control skills and remote management. Maybe some new Hyper-V goodies?!
 

3 more replies
Relevance 59.04%

Next year we'll be moving all of our servers to VMWare hosts, and since we're still running Server 2008 I'm interested in upgrading the OS as well. At the moment I have some other enterprise software to test, and assuming it's supported I'd like to try it on Server 2016.

Is anyone using Server 16 in a production environment? Any issues or concerns?
 

More replies
Relevance 59.04%

I am in college course once again, This time for a BS in Computer Science Majoring in Cybersecurity, and minoring in Ethical hacking.

I have got axcess to Windows server 2016, now when i go to download I find these three options

Data Center

Essentials

and standard.

Know last time I ran windows server, was on the 2008 and I played around from blade servers to the dell big boxes, even slapped it on to some desktops.
I have a system which I was planning on making in to a server, it is a MOBO taken out of a HP 110-023W which Specifications can be found here

https://support.hp.com/us-en/document/c03779346

I am Wanting to know, if the system would work, because I have a single CPU and dual cores upon that and windows 2016 says minimum 8 core.
If it wont work I have other plans for the beast.... A PF sence BOX.

Answer:Windows server 2016 questions?

https://technet.microsoft.com/en-us/...m-requirements

8 cores is not a requirement - not sure where you saw that at.

1 more replies
Relevance 59.04%

I have to substitute the screen on my non-touch dell xps 13 (DP/N 0DJCP6  , Sharp LQ133M1JW21 screeen)and am wondering what screens are compatible with my laptop. 
would the touch or not touch screen of the 2015 model be compatible? 
I am sorry for posting on the wrong group, but i could not find the post button neither on the desktop nor on the laptop group. 

More replies
Relevance 58.22%

I am currently having an issue were Windows 7 computers can not connect to Server 2016 (domain). Right away I get a "The logon attempt failed".
I know that user information is correct, because I can connect using any Windows 10 computer. I have tried this from multiple Windows 7 computers, they all give the same error. I don't have any problems at all with Windows 10.

So, this seems to be isolated to Windows 7.
Has anyone seen this or know how to get around this issue?

I appreciate your help!
 

More replies
Relevance 58.22%

Download: Windows Server Technical Preview | TechNet Evaluation Center

Release Notes: Release Notes: Important Issues in Windows Server 2016 Technical Preview

Changelog: What's New in Windows Server 2016 Technical Preview 4

I may gonna test it out inside VMware
 

More replies
Relevance 58.22%

Hi there,
I am currently testing the working of Microsoft Advanced Threat Analytics. I have two virtual machines running windows server 2016 TP4. One VM for ATA Center, Second for Gateway. All the prerequisite steps are configured and port mirroring is working fine.
When i try to install Center setup the message come that " The specified Program requires newer version of windows"

I want to know that does Microsoft ATA supports windows server 2016?
Regards,
Pratik

More replies
Relevance 58.22%

Source One: System Center 2016 to launch in September

"We are pleased to announce that Microsoft System Center 2016 will be launched at the Microsoft Ignite conference in late September."​
Source Two: Windows Server 2016 new Current Branch for Business servicing option

"Windows Server 2016 is the cloud-ready operating system that delivers new layers of security and Azure-inspired innovation for the applications and infrastructure that power your business.

New capabilities will help you:

Increase security and reduce business risk with multiple layers of protection built into the operating system.
Evolve your datacenter to save money and gain flexibility with software-defined datacenter technologies inspired by Microsoft Azure.
Innovate faster with an application platform optimised for the applications you run today, as well as the cloud-native apps of tomorrow.
Windows Server 2016 includes 3 main editions:

Datacenter: This edition continues to deliver significant value for organisations that need unlimited virtualisation along with powerful new features including Shielded Virtual Machines, software-defined storage and software-defined networking.
Standard: This edition is ideal for organisations that need limited virtualisation but require a robust, general purpose server operating system.
Essentials: This edition is designed for smaller organisations with less than 50 users.
These editions will be available for purchase on the October 2016 price list... Read more

Answer:Windows Server 2016 to launch in September

Nice share @Huracan wonder if it is going to be more secure than Windows 10.
 

1 more replies
Relevance 58.22%

Not able to Install OS on HP Proliant DL20 Gen 9 Server, HDD not detected in Logical Drive..

More replies
Relevance 58.22%

I am getting this error on one DC, not alot out there that I can find on this error.


Faulting application name: mmc.exe, version: 10.0.14393.953, time stamp: 0x58ba5cff
Faulting module name: GPOAdmin.dll, version: 10.0.14393.1066, time stamp: 0x58d9f2af
Exception code: 0xc0000005
Fault offset: 0x00000000000be1c6
Faulting process id: 0x1120
Faulting application start time: 0x01d2b9ddb96a8ddb
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\System32\GPOAdmin.dll
Report Id: 72683f7e-ea63-4447-8373-4e7c2c33e883
Faulting package full name: 
Faulting package-relative application ID: 

More replies
Relevance 57.81%

Just bought new Spectre x360 convertible computer with Windows 2016. Left computer idle for a few minutes (15) and returned to screen saver.  Clicked on the enter button to get to password screen and entered password.  After entering it, the wheel of death started and kept spinning.  When I tried to turn the computer off, I may have accidentally hit stand by mode.  Then the screen started flashing.  I quickly unplugged everything.  It did come back on and I didn't lose anything.   What should I do so that this doesn't happen again?

More replies
Relevance 57.81%

Windows server 2016 activation error 0xc004c020
 in Virtual server environment how can I fix this

More replies
Relevance 57.81%

Hi;My Vodafone USB modem isn?t getting picked up. I?m running Windows Server 2016 Datacenter Edition on an Acer Aspire E1-532 and I have the latest Vodafone app installed for the Windows 10 drivers, but it gives the following error:Service cannot be started. System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {BDFEE05B-4418-11DD-90ED-001C257CCFF1} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.Activator.CreateInstance(Type type) at Vodafone.NtService.Core.MbnApiListener.Start() at Vodafone.NtService.Core.DeviceManager.Initialize() at Vodafone.NtService.Core.NtServiceCore.In...The device is a K4203-Z and is not supported by Microsoft nor Vodafone on Windows Server.Can anyone help?

More replies
Relevance 57.81%

Historically I've used the following syntax with NetMon to determine which switch/switchport each of my server interfaces are connected to: 

nmcap.exe /network "<interfacename>" /DisableLocalOnly /capture SNAP.EtherType == 0x2000 /StopWhen /TimeAfter 2 min /file "<filename>.cap"

With MMA, I can just do a filter for LLDP, and get the same information, at least on my Windows 10 laptop that is.  When I run a capture either locally on a Windows 2016 server, or remotely against
a Windows 2016 server there are no LLDP packets captured.

Am I doing something wrong?

More replies
Relevance 57.81%

How do you install .net framework 3.5 in windows server 2016 with Powershell?

I'm using this guide:

https://technet.microsoft.com/en-us/library/dn482068.aspx

and I tried this command:

Install-WindowsFeature Net-Framework-Core -source C:\Users\Administrator\Downloads\

and this command:

Install-WindowsFeature Net-Framework-Core -source C:\Users\Administrator\Downloads\dotNetFx35
setup.exe

However, I get the following error and I have no idea how to use Powershell because I was never taught in college, but I did buy a book on it and haven't found time to read it:
PS C:\Users\Administrator> Install-WindowsFeature Net-Framework-Core -source C:\Users\Administrator\Downloads\dotNetFx35
setup.exe
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
One or several parent features are disabled so current feature can not be enabled. Error: 0xc004000d
At line:1 char:1
+ Install-WindowsFeature Net-Framework-Core -source C:\Users\Administra ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}SObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
owsFeatureCommand

Success Restart Needed Exit Code Feature Result
------- -------------- --------- --------------
False... Read more

More replies
Relevance 57.4%

I am trying to add Windows 10 clients to Windows Server essentials 2016. It seem that in order for the server to see the clients I must the clients join the server server Domain. (Currently they are in a workgroup).

It looks like one has to change the Windows10 clients to access the WSE-2016 DNS. So in windows 10 I go to networks, bring up the adaptor setting. Bring up "Internet Protocol Version 4 (TCP/IvP4) and instead of "Obtain the DNS address automatically" change it to always get the DNS address on the WSE-2016 (found with ipconfig).
Then within Windows I use ?System?, ?about?, and Join the server DOMAIN. It now works. The client can now see the Server domain.
I can then see the Server files and the server can see the Windows 10 shared files.
There are still problems however.
When I reboot the Windows 10 client. I have a brand new user screen with only some of my original desktop icons showing. Do I have to essentially rebuild up everything on my desktop again!
Question: Is there not a way to have my original desktop appear when I am joined to the Domain.
Second, since there will be times when the server is off I used the router static DNS IP address as the alternative address in the above dialog box of the Windows10 clients. Seems to work since the client can access the internet even with the WSE 2016 off.
Here is my second question. I have a few home laptops as well. If I force the DNS to the server what happens when I travel. ... Read more

More replies
Relevance 57.4%

I am trying to add Windows 10 clients to Windows Server essentials 2016. It seem that in order for the server to see the clients I must the clients join the server server Domain. (Currently they are in a workgroup).

It looks like one has to change the Windows10 clients to access the WSE-2016 DNS. So in windows 10 I go to networks, bring up the adaptor setting. Bring up "Internet Protocol Version 4 (TCP/IvP4) and instead of "Obtain the DNS address automatically" change it to always get the DNS address on the WSE-2016 (found with ipconfig).
Then within Windows I use ?System?, ?about?, and Join the server DOMAIN. It now works. The client can now see the Server domain.
I can then see the Server files and the server can see the Windows 10 shared files.
There are still problems however.
When I reboot the Windows 10 client. I have a brand new user screen with only some of my original desktop icons showing. Do I have to essentially rebuild up everything on my desktop again!
Question: Is there not a way to have my original desktop appear when I am joined to the Domain.
Second, since there will be times when the server is off I used the router static DNS IP address as the alternative address in the above dialog box of the Windows10 clients. Seems to work since the client can access the internet even with the WSE 2016 off.
Here is my second question. I have a few home laptops as well. If I force the DNS to the server what happens when I travel. ... Read more

Answer:Adding Windows 10 Clients to Windows Server Essentials 2016

When Windows client computers are not joined to a domain they use the local SAM database to authenticate to the client computer. When the computer is domain joined you are using an AD user account to log into the computer. These accounts are going to have different SIDs as well as local profiles on the system. If you log into the computer with an account that has local admin access, you can simply move or copy the data from the local user account folder into the domain account user folder. The user folders inherit permissions from the root C:\Users\<username> so they should automatically gain access to the newly copied data.

7 more replies
Relevance 56.99%

Hello everybody
So  have this problem/question, so  have
a windows server 2016 standard evaluation  14393.rs1_release170731-1934,
and  have  two
updates KB3211320 and KB3192137, and the windows  me uninstall the updates, doesn't not even appear the button "Uninstall",
anyone knows how to remove this?

thank you for your help :)

More replies
Relevance 56.99%

I have just succeeded in hooking my Windows 10 client to Windows Server Essentials 2016. To do this I had to switch the W10 from a Workgroup to Domain setup.
All works fine except most of the desktop items originally on the client icons disappeared. Worse when I launce things like Outlook, Word etc. I have to initialize it from scratch.
How does one get all the settings, desktop icons etc. to re-appear on this new account that is now chanced from a Workgroup to a Domain setting.
I am an administrator (and only user) on both the W10 and WSE-2016. I see under users my original name on the W10/Workgroup and a new name. The new name does not have many files in it. I assume that?s the problem. But when I copy stuff from the old name folder across the programs are still not initialized correctly.

More replies
Relevance 56.99%

kms activate of Windows7 Professional on Windows Server 2016 Standard.
We hava a problem.

We built kms host on Windows Server 2016 Standard.
We attempt to authenticate Windows 7 Professional.
But We can't authenticate  Windows 7 Professional
and ouccur below error messages.

 cscript slmgr.vbs /ipk xxxx-xxxx-xxxx-xxxx-xxxx???use Windows 7 professional kms key.
 error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
 
and We confirmed below error messages.

 cscript slmgr.vbs /ipk xxxx-xxxx-xxxx-xxxx-xxxx???use Windows 10
 error: 0xC004F015 On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0xC004F015' to display

We want to solve this problem.
Please tell us this problem's soloution.

==============================================================
 1) We built kms host on Windows Server 2016 Standard(kms key)
 2) We built and enable to authenticate office 2010.

  Name : Microsoft Office 2010, KMSHost edition
  Description : Microsoft Office 2010 KMS, VOLUME_KMS channel
  Partial Product Key: Txxxx
  License Status: Licensed
==============================================================

Best regards.

More replies
Relevance 56.99%

The second technical preview of Windows Server 2016 will be launching in May as the first one nears its expiration date.

Windows Server is being developed and targeted for an early 2016 release, however, the latest and greatest preview builds haven't been released to the public by Microsoft since October 2014. At the same time, Windows 10 builds have been released regularly to Windows Insiders.

http://www.zdnet.com/article/microsoft-next-windows-server-2016-test-build-due-in-may/
 

Answer:Second tech preview of Windows Server 2016 coming next month

If it's anything like the past two server editions, wait until R2...
 

4 more replies
Relevance 56.58%

Hi,
I am aware that the latest MBSA version available is 2.3 which is not supported for Windows 10 and Windows server 2016. What is the best alternative for MBSA which can be used on Windows 10 and Windows server 2016 to identify the missing security patches.
-Coryos

More replies
Relevance 56.58%

This come up in a lunchtime conversation and I think the answer is "no" but before I do any google searches I thought I'd ask the collective wisdom of [H].
 

Answer:Windows Server 2016 -- Free Upgrade a la Windows 10?

No.
 

2 more replies
Relevance 56.58%

Does it have a key logger, etc. ?
 

Answer:Is Windows Server 2016 loaded with spyware like Windows 10?

lol. Surely you're kidding? Of course it does.
 

1 more replies
Relevance 56.58%

Hello. Recently I bought bluetooth headset (harper HB-400) and tried to connect it with my laptop What I made - Clicked "add a device" in "bluetooth devices'" icon in task bar, saw my headset and clicked it. But it didn't appeared in Playback deviced.I couldn't check what services afford that headset, and after a while i desided to update bluetooth drivers.(Recenlty I've changed my HDD to SSD and made a clean install) What I have now - I can't properly install any of drivers for bluetooth. If i try that drivers (from Intel)http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-s-series-laptops/thinkpad-s43...installer said that he "cant start bluetooth OBEX Service" if I try drivers from Broadcom, it says that there is no bluetooth devices I tried Lenovo System Update 5, but it offers same driver from Intel which I can't install.. I start all installers "as administrator"  ==Now I have three unrecognized devices under "other devices" tab in device manage - 3x "bluetooth peripheral device"Under "bluetooth radios" I have "generic bluetooth adapter" and "microsoft bluetooth enumenator"Under "network adapter" I have "Bluetooth Device (Personal Area Network)" and "Bluetooth Device (RFCOMM Protocol TDI)"Searching a device shows none of them (not my phone nor headset)clicking "show bluetooth devices" folder shows empty folder with infinite search progress on top of the windowclicking "open settings" on "bluetooth devices" ... Read more

Answer:ThinkPad s430 cannot install proper bluetooth driver on Windows 7 x64

after numerous install-reinstall cycles i've ended up with working drivers -  Intel 2.6.1212 from http://www.intel.com/support/wireless/wlan/sb/CS-034295.htm

1 more replies
Relevance 56.58%

I have used windows 10 for a while and decideded to downgrade to 7. I changed the partition and disk format during a clean win 7 installation. I have installed most of the device driver without issues except WLAN. I serached within the forum and downloaded as many possible drivers as I could find. Tried every one of them, they either give me NO PROER DRIVER TO INSTALL or give me error 1185. I have no clue how to proceed at this point. Will highly appreciate if some one can give me some help to resolve this problem. Thanks in advance, Joe.

Answer:Y410P Could not install proper WLAN driver after downgrading to windows 7

Hello Megacooper08Thanks for using the Lenovo forums.Have a look on the support site, this should have the drivers you are looking for for your unit.
 
http://pcsupport.lenovo.com/de/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad-y41...
 
Hope this helps, let us know how you get on.==================================================================================Did someone help you today? Thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
 
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

 

2 more replies
Relevance 56.58%

Hello everyone, this is my first post and I count on your support.
I am currently trying to install Windows Server 2016 Datacenter Edition using Windows Deployment Services on two discs 136.12gb raid 1, but this will not let me because it says I need at least 150GB HDD to proceed with the installation, the same method is applied in virtualized machines in hyperv and Proxmox and does not throw me any error. (see attached image)
The server details are as follows:
DELL poweredge r610 128gb ramintel xeon 2.67ghz 6 core
4 hdd en raid 0 each independent:hdd 931gbhdd 931gbssd 446.42 gbhdd 1862.50 gb
2 hdd both raid 1:hdd 136.12 gbhdd 136.12 gb
I count on your support.
Thankful in advance.
Best regards.

More replies
Relevance 56.58%

Hi,
I have a server with Windows Server 2016 Standard forTerminal Services access, and the user can't run the MBSA, appears always pop up for introduce Admin Credentials.... exist anyway to change this and user run the MBSA?
Regards,

More replies
Relevance 55.76%

.. hoping I can get some help on this. Driving me nuts!

Since upgrading to Windows Server 2016, WOL doesn't work for me. I've ruled out network or router issues, since it works perfectly fine on my Windows 7 machine.

I have 3 NICs in a team, but that's irrelevant, since the WOL doesn't work even if I disabled the teaming. One thing I did notice is that when I shutdown my Windows 7 machine, the NICs remain lit. However, the NICs on my Windows Server 2016 completely turn off. I don't recall if that was the case when I was using 2012 on the same hardware, but it seems strange to me. If the NICs are completely off, I can't imagine there is a way for them to receive magic packets.

I checked the UEFI and all the necessary options are enabled for WOL. I also tried upgrading the NIC drivers on the server but that didn't help. I read that Windows 10 has a "fast startup" option that messes with WOL, so I disabled it in the Group Policy settings on the server, but that didn't work either.

If anyone has any ideas, I'd be grateful for the help.

More replies
Relevance 55.76%

Has anyone gotten GPS to work on the X1 with Windows8? A clean install resulted in this:  GPS won't start. This is the driver i have installed/reinstalled:support.lenovo.com/en_US/downloads/detail.page?DocID=DS032425  What am i doing wrong? 

Answer:X1 Carbon, Windows 8 - H5321gw STATUS_DEVICE_POWER_FAILURE

wallberg wrote:support.lenovo.com/en_US/downloads/detail.page?DocID=DS032425 What am i doing wrong? Probably nothing.  It's probably a driver bug.

7 more replies
Relevance 55.76%

HOPING to see if 7.9 would work for my radeon 1950 256 mb x16
7.8 giving me alot of problems..hoping that 7.9 would be my solution..
if not then..imma have to stay with my little PCI radoen 256 little weenie card with its latest driver. 6.11. lol

so repost me and tell me if you guys think its worth a try or sometin.
 

Answer:Driver 7.8 Didnt Work, 7.9 Is Out

Are you uninstalling the old graphics driver through Add and Remove Programs before you install any new ones?
 

22 more replies
Relevance 55.35%

I am trying to replace the auto generated self-signed (Issued to DM, issued by DM) certificates for the HDPM Server and Master Repository.  I am NOT refereeing to FTPS, the HPDM Embedded HTTPS Server, or the Thin Client Agent certs.   I have already setup certs from our own domain internal CA for FTPS in IIS and the Apache Embedded HTTPS server.  These are working fine and Repository tests pass for both protocols.  I have also issues to the Thin Clients from our internal CA just fine. I'm interested in the actual HPDM Server cert and Master repository cert. These are self-generated when the two services start up.  They use a very weak MD5 hash and RSA 1024 key.  I cannot find any documentation around this except for troubleshooting in which you can delete these certs restart the services and they will be regenerated.   Here are the certs\key paths%HPDM Install Path%\MasterRepositoryController\Controller.crt (Repository Cert)%HPDM Install Path%\MasterRepositoryController\Controller.key (Repository Key)%HPDM Install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)%HPDM Install Path%\Server\Bin\hpdmskey.keystore (Both HPDM Server and Repository Certs and Keys)(Not sure the format it is in.  It's not PEM and ok P12 as far as I can tell) There is also %HPDM Install Path%\Server\bin\hpdmcert.key.  Not sure what this is.  Think it?s the HPDM Server key but deleting it does nothing and it is ne... Read more

More replies
Relevance 55.35%

Hello, 

I have a very frustrating problem. I want to use Windows 2008 R2 Terminalserver with Outlook 2016. 
Unfortunately every time a user starts Outlook, he installs the 64 bit Components. It seems there is one solution: Installing Windows Search Role and starting Outlook in Installation Mode. 
Seems to work. With that solution, there is another problem: It is not possible to search in pst-files. Windows error log says event ID 3036. Looks like, Windows Search cannot index pst-files (in network). The possible solution to disable indexing for Outlook
does not work because the configuration change got reseted after relogin. This might happen because of our Roaming users. 
As you can see, I have one problem. When Windows Search is installed, pst-files are not searchable. When Windows Search is not installed, Outlook 64 bit Components get installed every start of Outlook. 

Is there anybody who has other ideas for a solution? 

Thank you for your help. 

Jens

More replies
Relevance 54.94%

I'm going to buy a new license of one of these product, so any suggest please?
I have used Bitdefender, Avast, Kaspersky ( about 3 years ago), I haven't used Norton and Trend Micro.
 

Answer:KIS 2016 vs NIS 2016 vs BIS 2016 vs Avast IS 2016 vs Trend Micro IS 2016

Out of all these,and your prerequisites,I would go with Kaspersky!
PS:This is from personal experience,and other members may have varying opinions!!
 

3 more replies
Relevance 54.53%

My printer woud not print in color today (Mother's Day) so I tried to interact with the printer. I discover I could not I then checked on the history of windows defender wich listed parts of the printer softaware as trojans and had deleted parts of the software. So I tried to donload the new firmware and software which in turn was alo deleted as trojans. I am a programmer myself and have had to go through 24 reiterations of code and several compiler to get my onw product to run in our enivronment before we could go production. No I see you are being hit as well, god luck.

More replies
Relevance 54.53%

My ericsson H5321GW jumps detected/not detected in windows 8. Last firmware and drivers is installed...Anybody knows what is wrong...

Answer:Wwan H5321gw detection problem in windows 8 and win7

I try my H5321gw on my other computer Dell M6500 win7 64 and itkeep jumping on detected / not detected...Is my card faulty or is that new g7wq11ww firmware bad...

4 more replies
Relevance 54.53%

Hi,

Im trying to install the driver Virtual Audio Cable v4.09
The file im trying to install is setup64 since my windows is windows vista ultimate 64bit .

So when he ask me if to install it anyway i choose yes.
Then he is installing it but just when it finish the installation im getting a msg that the driver isnt digitally signed by microsoft after it im getting msg installed sucessfuly but when im trying later using the driver im getting error msg that the driver cant be loaded or not running .

I searched in forums and saw that in windows vista that is 64bit you cant solve it .

Anyone here have any ideas how to install this driver ?

Thank you .

Answer:Driver didnt pass digitally sign Help please :

Hi Chocolade,

Have a look here;
How to Turn off Digital Driver Signing Enforcement in Vista | Windows Reference

Hope this helps

Pooch

1 more replies
Relevance 54.12%

Am trying to install HP Deskjet 630c printer and it keeps telling me this driver is not digitally signed. I just put Windows xp on the computer. What does this mean and can I get help? I am not very computer literate and any help would greatly appreciated. Many thanks Paula.

Answer:driver is not digitally signed

"Not digitally signed" means Microsoft have not tested this driver and verified it to be compatible with Win XP.  This does not mean it will not work, you should click on the "continue anyway" to install your print driver.  If this is a concern you should check the HP web site for newer driver tested by MS.Kim

1 more replies
Relevance 54.12%

I'll try to keep this brief:

> Upgraded GFX cards to 2 x Asus EAH4980 (ATI Radeon HD4890 architecture) from NVidia 8800GTS

> Performed full format on HD and reinstalled Windows Vista X64 Home Premium as well as SP1 and SP2

> Installed chipset drivers etc.

> Installed bundled VGA drivers (8.592)

> Installed miscellaneous software/games

System was running very stable and performing well in Benchmarking tests and games. I then tried to update the VGA drivers to the latest versions, first from ATI's own website - Catalyst 9.8 with VGA driver displayed in Device Manager as 8.640 - and then from Asus' website - displayed as 8.630 in Device Manager.

No matter what drivers I update to I am met with BSOD errors as soon as I try to run any kind of media on my PC. The dump files/dxdiag info etc. is attached to this post.

Upon investigation I note that one driver is not loading and is listed as 'not digitally signed', namely

ATKDispLowFilter.sys

This driver is an AsusTek release. It appears to load ok before I perform these driver updates. I can find no reference to any issues with it either on Asus' forums or elsewhere so this doesn't appear to be a common problem.

I've tried to locate a signed version of the driver to no avail.

Any solution would be very much appreciated.

Phil



-----------------------------------------------------------------------

System Info:

Asus Rampage Formula MB
Intel Q9550 45nM
Nvidia 4x1... Read more

More replies
Relevance 54.12%

I recently got a docking station for my laptop (Dell precision M65 w/WinXP Pro SP3 all updates) and when I plugged it in (after all the plug-n-play stuff detected the new docking station stuff), the mouse plugged into the dock USB port would not work (it worked fine previously when plugged into the laptop USB port). I undocked and plugged the mouse back into the laptop's port but it still didn't work.

I went into the device management applet and and tried to update the driver. There was nothing under "Mice and other pointing devices" except the PS/2 touchpad. Under "Human Interface Devices" there was an entry called "HID-Compliant device" If I deleted that device and then did a "scan for hardware changes" I would get the "found new hardware" popup in the tray and then breifly see "Dell USB Optical Mouse" during which the mouse would work but within 2 or 3 seconds it would switch to "HID-Compliant device" and then inform me that my hardware was ready to use at which point the mouse stopped working.

After much screwing around with the device manager and various other USB mice, I found that I could use the "Update Driver" right-click menu item to force the driver to "HID-Compliant mouse" by bypassing all the "Automatic" stuff. This resuted in a working mouse, but I have to do this every time I turn on the laptop.

I have noticed that while following the dialogs during... Read more

More replies
Relevance 54.12%

Hey guys can somebody please help me im trying to install a vodafone 3G modem on my HP Pavilion DV7 laptop but i cant it says driver not digitally signed. Im using windows 7 home premium 64 bit

Answer:driver not digitally signed

Hello Tokelo and welcome to the forums.

Your best bet is try this - Disable Driver Signing in Windows 7

I have not tried it myself but it may help.

Report back with your findings.

Lucky

1 more replies
Relevance 54.12%

PeerBlock is a fork of the popular Peer Guardian 2 software. Well the folks that are developing it have just received a legally signed driver for PeerBlock which means that it will run on Windows Vista and Windows 7 (32 & 64 bit) without the problems that were plaguing Peer Guardian 2.

You can check it out at PeerBlock Development

PeerBlock Free Download and Reviews - Fileforum

Answer:PeerBlock Now Has a Signed Driver

that software is false security

4 more replies
Relevance 54.12%

Greetings to all, I have W520 64 bit Windows 7. I get an alert when I restart the laptop indicating a digital signed driver for drive Rapid Boost Drive. How do I get one or stop getting this message ? Thank youi. Ldxrunner

Answer:Need a digital signed driver

Do you mean RapidBoot?

4 more replies
Relevance 54.12%

its actually my dad's lappy..n he want me to install windows 7 in his acer aspire 4736..but when im done installing, it didnt detect the DVD-RW driver at My Computer.. in bios setup also didnt detect..i really dont know how to solve it coz it is PnP rite? someone could help me..

Answer:Acer Aspire 4736..it didnt detect DVD-RW driver on 7?

  
Quote: Originally Posted by beaters


its actually my dad's lappy..n he want me to install windows 7 in his acer aspire 4736..but when im done installing, it didnt detect the DVD-RW driver at My Computer.. in bios setup also didnt detect..i really dont know how to solve it coz it is PnP rite? someone could help me..


The fact the Bios doesn't see it, means it's not a win7 problem.

From your story I must assume you didn't install windows from a DVD.

A laptop's DVD drive can be taken out easily.
Try if you can push it further into the laptop.

If that doesn't help, one of several components might be broken.

The DVD drive itself.
The connector at the end of the drive.
The onboard ide controller.

On the bottom of the laptop remove the screw that keeps the DVD drive in place, and take the drive out and push it in again.

If that doesn't help, you would have to buy a new one and hope it's not the onboard controller.

They are not expensive, about 35 euro's, or $ 45.

Good luck

5 more replies
Relevance 53.71%

My audio driver won't install b/c it's not signed. Anyway around this? I can't use the Vista driver b/c that didn't work for my surround sound on my mobo. ASUS has Win7 x64 drivers, but their not signed

Answer:My audio driver won't install b/c it's not signed -_-

Anyone know how I can get this installed?

9 more replies
Relevance 53.71%

G'day. I'm trying to install my old VisionPLus DVB-T card into a Windows 7 O/S box and it won't recognise any of the old drivers. When I try to install the TwinHan Digital tv software, Windows can't/ won't install them.

I've downloaded and tried the latest (DigitalTV 3.4 Build 19-02_20090212) and windows comes up with "Driver not found". I've tried to install in compatability mode but still no good.

When installing the above, it identifies my card as &#8220;PCI CX-87A with MCU DVB-S/-C/-T/ATSC card&#8221;.

Out of all the available drivers on Twinhan's site, which would be the best for my card?

Thanks
 

Answer:Driver not digitally signed so won't install

64bit Windows 7?

http://suffolk757.com/blog/2009/03/05/installing-unsigned-drivers-in-windows-7/

Out of all the available drivers on Twinhan's site, which would be the best for my card?
Click to expand...

The one written for Vista would be my choice, probably not one for W7 yet, may never be.

Looks like MS ha removed a way to disable unsigned drivers protection in Vista64, so probably is the same for 7
http://www.mydigitallife.info/2008/...-cause-drivers-not-found-in-64-bit-vista-x64/
The issue is known to affect PeerGuardian, TV tuner cards, Gigabit Ethernet adapters, CD/DVD-ROM/RW drives, and many other devices.Click to expand...

Looks like unsigned drivers are a no go for x64 Vista and Windows 7, well there are some workarounds in the article above, sounds like a hassle.
Not sure if this software will work with W7
http://www.tipandtrick.net/2008/per...iver-signature-signing-with-readydriver-plus/
 

3 more replies
Relevance 53.71%

I create a signed driver named fangcloud.sys, and signtool.exe to verify the driver like follow:
PS C:\Program Files (x86)\Windows Kits\10\bin\10.0.15063.0\x86> .\signtool.exe verify /v /pa D:\code\SyncNewVision\build
\windows\component\driver\64\win7\fangcloud.sys

Verifying: D:\code\SyncNewVision\build\windows\component\driver\64\win7\fangcloud.sys

Signature Index: 0 (Primary Signature)
Hash of file (sha1): 11C8FF8DD2070FA8A6EE7727007358812E26AA5A

Signing Certificate Chain:
    Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
    Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
    Expires:   Thu Jul 17 07:59:59 2036
    SHA1 hash: 4EB6D578499B1CCF5F581EAD56BE3D9B6744A5E5

        Issued to: Symantec Class 3 SHA256 Code Signing CA
        Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
        Expires:   Sun Dec 10 07:59:59 2023
        SHA1 hash: 007790F6561DAD89B0BCD85585762495E358F8A5

            Issued to: Hangzhou Yifangyun Network Technology Co., Ltd.
            Issued by: Symantec Class 3 SHA256 Code Signing CA
            Expires:   Tue Aug 20 07:59:59 2019
            SHA1 hash: 12BA8EBB01FCA162472D6A6... Read more

More replies
Relevance 53.71%

Hey,

So I just upgrade to Vista x64 and 4GB of memory (courtesy of OCZ).

However, when installing the x64 version of MagicDisc/MagicISO I get the following error:

Can I get around this?
 

Answer:Required Digitally Signed Driver?

Uhmmm... yes, you can by pressing F8 at boot time and choosing to ignore the warnings about unsigned drivers, but you have to do it each and every time you boot. There is a way to permanently disable that driver signing requirement but I'm leery to give out the info anymore since it hosed a few people's machines recently.

It wasn't my fault that they chose to continue using shitty old drivers, but they blamed me for the mistake they made anyway.

Vista x64 is a more secure and stable OS than the 32 bit version, and that's one of the primary reasons why: the driver signing requirement. Disabling it or 'getting around it' will more than likely end up causing you issues at some point.

Google can find the specific method to disable the signing requirement permanently, or a search here might find it since it's been posted about 3 times over the past 4 months or so.

Good luck, either way...
 

5 more replies
Relevance 53.71%

Good evening,

I just reinstalled XP on a friends machine that was pooched. It is a Dell DIM4400. Everything is working except for the sound card. It is a built in sound card. When the computer boots up the new hardware wizard comes up asking for a driver for a realtek AC97 Audio device. I have tried everything I can to install the driver but each time I try I get an error that the driver is not digitally signed and it won't install. If I try in safe mode it installs but I get a blue screen upon startup and have to reboot. I do not have the orignial Dell cd but I have tried every driver from the Dell site that should work on this model of computer. I have updated the chip set drivers on the motherboard etc. I just can't get this sound card to work. Any advice??
 

More replies
Relevance 53.71%

Hi, I finally have my File System mini-filter driver working great, and tested it a lot on Vista 64-bit using the testsigning boot option. All was fine.

However, when I turn testsigning OFF and try to start the service (the driver), I get the StartService failed with 577 - windows cannot verify the digital signature. Note that the driver in INSTALLED, and the Registry is updated, etc. I just can't start the service (even when running as Admin).

It is signed using a Microsoft cross-certificate, based on the original certificate issued by GlobalSign, as directed in MSDN. You can examine the certificate using the driver's properties, and all looks fine.

I also tried installing the certificate, but that made no difference. This should all be correct, except that it doesn't work!! Any idea what is going on here? Any help would be greatly appreciated! I thought I was all done with this project, but since it doesn't work, I am currently screwed. THANKS!

More replies
Relevance 53.71%

I have NVIDIA GeForce 8800 GT with which I have had some driver issues. While checking the Driver details in Device Manager I noticed that some Driver files are not digitally signed. These are: C:\Windows\System32\nvcpl.cplC:\Windows\System32\nvcplui.exeC:\Windows\System32\nvcpluir.dllC:\Windows\System32\nvexpbar.dllCould this be causing problems with my drivers?

Answer:Driver files not digitally signed

It is my view that you should always download drivers form the Manufacturers website. To update your current drivers go hereclick here

3 more replies
Relevance 53.71%

I have been using the Easy2Boot software for some time.. where you can load iso's on the USB stick and it will populate a menu and you can select the iso on bootup..

In many cases i have not had a problem.. but on some machines i run into the issue with windows installers where it prompts to "Load driver" (and even sees the local hard drives if you hit browse too)..

In this case right now .. i have an amd GIGABYTE GA-F2A85XM-D3H FM2 motherboard.. i also have a vantec controller card for extra sata 6 ports on the internal side as well.

In either case i have the bios set to legacy and uefi both, sata is set to ahci (i have tried ide with no luck)..

I went to the amd site and found what appeared to be "amd" ahci drivers.. put them on the stick.. i also put the vantec controller card ones there.

So i tried the harddrive just on the amd controller.. usb boots up.. install clicked.. wait.. "load driver" pops up (the OS intended drive can be see if you click browse).. browse for the driver anyway.. choose amd.. tried vantec as well.. click next.. it says failed to find.. and back to square one.

Then i tried the driver on the vantec controller only.. repeated.. same results.

I would have tested this with a dvd, but i didnt have the right size tonight.. but i'm pretty sure.. 99% of the time if i try this via booting to a dvd instead.. i dont get the "load driver" prompt.

Perhaps this is a short coming of the "Easy2Boot&quo... Read more

More replies
Relevance 53.3%

I have a print server running 2003 standard sp2, I have been looking for a way to allow helpdesk staff install and manage printers without logging into the server and without adding them to the admin group.

So I added them to the power users group and the print operators group, that worked fine they were able to UNC ( \\servername ) to the server and install printers, drivers, as well as uninstall drivers? printers ect????.
Now the problem??? this works great from an XP box, but when we try it from a windows 7 machine we get access denied. More specifically it acts like it is going to install the printer then when it comes to the driver installation part it fails ?Printer driver was not installed. Access is denied.?

No changes have been made to the permissions I can log into an XP machine with my profile and it works fine log out go to a Windows 7 machine use the same credentials and I get the above message access is denied. I am an admin of both machines on the windows 7 machine I have UAC turned off completely. Running XP Pro SP3 & Windows 7 pro both are 32 bit machines.

I should also add that I have made the necessary group policy changes to allow printer operators to Load/Unload device drivers and under the local policies/security options I ensured that the Prevent users from installing printer drivers was Disabled.

Any help would be much appreciated.

Thanks

Answer:Windows 7 & 2003 Server Standard SP2 Unable to remotely install driver on print server

How do you enter the credentials on the Windows 7 machine? I've noticed that you have to use "domain\username" rather than just the username in some cases.

3 more replies
Relevance 53.3%

OneDrive on my laptop is showing that I am not signed in. I have verified that I am signed into my Microsoft account, and I can access OneDrive online and on my phone.

Answer:Why is OneDrive on my laptop showing as not signed in when I am signed in on all other devices?

I'm not 100% sure, but I believe you might have to sign in separately on your laptop for it.

1 more replies
Relevance 52.89%

I'd like to install a graphics card utility called RivaTuner but it requires that signed driver checking is disabled in Vista x64.

I'm running Vista x64 Service Pack 2, so how can I disable signed driver checking?

Answer:How can I disable signed driver checking in Vista x64 SP2?

Hello sofakng,
Try F8 on bootup and disable from there, i think this will work. Good luck and please post your results, thank's.

2 more replies
Relevance 52.89%

Inatalled software from CD to run new Canon A560 digital camera. Unable to download from camera as the driver software is "not signed" (I'm using Windows XP).Can open Canon 'Zoombrowser' s/ware only to get cannot detect camera message - have tried other USB ports - no difference.Also get Msg: 3rd party INF does not contain digital signature information.contact with Canon - fruitlesscontact with Dell (XP OS installed on PC) - fruitless.Contact with PC advisor? - Please helpMuge

Answer:driver software for canon A560 not signed in XP

I should add to my previous thread that the camera works fine when connected to my laptop.Muge

3 more replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

1 more replies
Relevance 52.89%

MAIN Problem #1:

Hi I'm wondering if anyone knows if i can find a Microsoft Certified Display adapter/video card driver (are those the same thing?) for my :
ASUS AGP-V7100 Geforce2 MX video card.

runnig win98/SE on a VIA chipset

The reason i ask is because when i look at my drivers through the DirectX diagnostic tool 's display tab it shows my driver as 'nvdisp.drv' and in the 'notes' sections adds :

" The file nvdisp.drv is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device"

but when i look through the ASUS home page i can't find my video card. I know my driver is from NVIDIA and i've found the right page to update from them but i'm also wanting to update my chipset driver from VIA and they warn of compatibility problems with NVIDIA so i'm looking for a "signed" "certified" or "standard" adpater/driver?
[current driver listed as ASUS AGP-V7100 SDRAM v12.60 in the device manager]
**********************************
**********************************
Related probelm #2

The reason i'm updating my chipset driver is because i need to update my diplay adapter. And I'm updating that because i'm updating my direct X. All because i'm having compatibility problems with my new CD burner's "NERO" software (OEM ver... Read more

Answer:Certified/Signed display adapter/driver?

11 more replies
Relevance 52.89%

I am having a heck of a time. I have installed Windows Vista Home Premium 64 Bit and the ASUS P5QC mobo I have came with an unsigned 64 bit Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
driver.

I called ASUS tech support and talked to them and as of this time, they have only a beta version of the 64 bit signed driver. Vista is not accepting the driver and is considering it as unsigned, so I am left without a computer that can connect to the net.

I have searched hi and low all over the internet to see if I could buy a wired ethernet adapter which has a 64 bit signed driver, but all of the ethernet cards I have been able to find are only compatible with the 32 bit version of Vista or they only have unsigned drivers for their ethernet cards. This is really frustrating!

Does anyone know here WHO (what manufacturer, make, model) of a wired ethernet adapter card 10/100 or 10/1000/1000 (that does not cost a fortune - is retail version, not industrial or commercial)
I might be able to purchase that has the appropriate signed drivers - or

Does anyone here know HOW to disable the signed driver enforcement in Vista Home Premium 64 Bit with SP1? I understand it was possible to do it at one time, but since Microsoft HEXED us with two patches, that route has been disabled. So if there is a way to disable the mandatory signed driver requirement, I would like a step by step explanation of how to do it, in lieu of the need to purchase a new card (my ASIS mobo comes with an UNSIGN... Read more

Answer:Vista 64 Bit Ethernet Signed Driver Trouble

Try Updating your BIOS. I have the ASUS P5QC mobo, and the wired connection works great with Vista Ultimate x64. Perhaps you have a bad mobo?

~Lordbob

27 more replies
Relevance 52.89%

I'm trying to install a program, but I says I can't install an unsigned driver.






Quote:
Driver: CPU Core Temperature Monitor
Service: Logitech CPU Core Tempurature (not a typo)


I've tried Disable Driver Signature Enforcement in my bios, and DDISABLE_INTEGRITY_CHECKS in cmd.

Neither works.

Answer:Need to bypass digitally signed driver requirement.

Go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks ON
Restart the PC and install the unsigned driver
After installation go to Start Menu > Run and type the following command: bcdedit /set nointegritychecks OFF
Restart your PC

4 more replies
Relevance 52.89%

downloaded samsung magician and installed it. it started up and apparently i need some sort of digitally signed driver now?

"program compatibility assistant"

"samsung magician application resource
samsung india software operations

windows blocked installation of a digitally unsigned driver. uninstall the program that uses the driver, and control releasers website to get a signed version of the driver"

Answer:samsung magician need digitally signed driver

You don't need Magician for the drive to work just fine. You may not get all the advanced features, but the drive will be plenty fast.

9 more replies
Relevance 52.89%

Hi all,

please can someone help me.....

I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours !

I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally signed... i have downloaded the correct driver from adpatec.com ensuring it was the driver for use with win7 64 bit...

i dont know what i should do now, ive tried booting from an ms dos diskette and loading the drivers that way, but nothing seems to work....

PLEASE HELP ME !!!

Answer:HELP! Driver is NOT digitally signed for Adaptec 1430SA

Hi press F8 when windows is starting and you can deactivate it for the time you are on, alas you have to do
it each time you reboot. Have to go will try help later.

4 more replies
Relevance 52.89%

we have a primary email server and a server that hosts our web pages and dns cache.

1. dns/web server is called "citrix" so something like citrix.trpress.com

2. we have a mail server.. so the mail would be mail.trpress.com for instance
this machine's name is ETP...

3. what should our name servers be on our citrix dns server?
etp.tpress.com ...

or

citrix.tpress.com

?

we currently have them pointing to tmk.tpress.com an old server that hosted email, web and dns all in one! so any ideas?
 

Answer:proper name server help asap (NS) in dns

Unless your new email server is also doing DNS, you need to set it to itself. It can resolve it's own queries. It should have forwarders set up (if needed) to resolve domains it is not authoritative to (this is in DNS that is, not any kind of client setting). Hope that's not too confusing.
 

12 more replies
Relevance 52.89%

i'm always receiving error messages about the incoming and outgoing server name
 

Answer:proper server names

In which application? You really have to be more specific when you post so that we can help you
 

22 more replies
Relevance 52.48%

I tried to install Ati tray tools, I got the "signed driver" error notice, so I reboot press F8 and select Disable Signed Driver Checking and try to install again. Same error

I tried bcdedit and still doesn't work

Using Vista64 business SP1
 

Answer:Disable Signed Driver Checking doesn't work

There is a hotfix you have to uninstall

Uninstall hotfix KB938979 and then you should be able to disable driver signing via the F8 method, or the BCEdit method...
 

13 more replies
Relevance 52.48%

OK, I have come across 3 methods to disable driver signing with the bcdedit program on various websites:
bcdedit.exe /set testsigning on/off
bcdedit.exe /set nointegritychecks on/off
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

What are the differences between them and which one should I use? Oh, how do you re-enable driver signing for the DDISABLE_INTEGRITY_CHECKS method, if I use it?
 

Answer:need help with enabling and disabling signed driver enforcement in vista 64

I'm using the last one and to re-enable it type: bcdedit /deletevalue loadoptions
 

2 more replies
Relevance 52.48%

Hi all, Following device:ThinkPad E531Graphics: Intel HD 4000System: Win7 Pro Following problem:1) Approx. 2 month ago a windows update caused a problem with the hdmi at my laptop. There was no connection to the TV possible anymore (I tried the TV, the cable and the hdmi device already).2) I installed a new driver (origin: Lenovo support page). Result: Windows messages that the driver is not digitally signed...Hence, the device "vga save" was set. What I've already tried, everything as admin:1) look for older drivers: Got only one and it didn't work2) Tried to install a driver directly from Intel: Didn't work3) Tried to disable the signing (GPEdit.msc -  code signature ...). Here I had the problem that I even have no line with the code signature to set the ignore property4) Tried to install the drivers (Intel and Lenovo) in the testmode. The waring message about unsigned drivers came5) Tried to create a certificate. Here the cmd said the command is not known.6) Tried to install the drivers (Intel and Lenovo) after setting the "TESTSIGNING" off (BCDEdit). The waring message about unsigned drivers came My question:Any ideas or similar experiences?I can not believe that the Lenovo or Intel drivers are not signed. But why Windows does not accept them?Is the available update to Win10 an option? Generally: Failure F40 (the failure is 40 cm in front of the monitor) is not excluded  Thank you very much in advance.Regards,Stefan 

More replies
Relevance 52.48%

I have x220 with Windows 7 Pro 64 bit. Device manager shows under Storage Controllers "Ricoh PCIe SDXC/MMC host controller," but there is a yellow triangle with "!" and a Device Status Code 52 message "Windows cannot verify the digital signature for the drivers required for this device." I checked in C:\Drivers\WIN\Multicard and found two *.cat files--which, I understand, are required to confirm digital signature. Each of them (ridisk.cat and risdxc.cat) has a signed and valid certificate! So what is going on? Will the card reader work? Is there something wrong with how Windows 7 is treating the Ricoh driver, which I downloaded from the Lenovo site? Why should I be getting this grief?













Solved!

Go to Solution.

Answer:Ricoh card reader driver-not digitally signed?

Hello,
 
Perhaps the driver is damaged?
 
Try deleting the Ricoh PCIe SDXC/MMC host controller from the Device Manager and then restarting the computer in order to let the Device Manager re-detect it and re-install the device drivers.  Does that solve the problem?
 
Regards,
 
Aryeh Goretsky
 

5 more replies
Relevance 52.48%

My harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though

I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.

When I boot into the F8 screen and disable driver enforcement I am able to get online.

I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.

I'd appreciate any help.

Answer:Asus recovery - Intel driver not signed (but worked before)

I'm having the exact same problem!! Please let me know if/how you got it fixed. Thanks!

3 more replies
Relevance 52.48%

No, I'm not asking, how to... I'm telling you how to

In a shell with admin rights, enter:

bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS

and yes, it's DD... no typo. Reboot and enjoy.
 

Answer:Disabling signed driver enforcment in Vista x64 final

What? Don't you know Microsoft knows what's best for you? How dare you try to think for yourself!
 

24 more replies
Relevance 52.48%

Hello, I have Windows 10 (64 bit) and all the latest Windows + Lenovo updates. The SSD's are Samsung 850 EVO (system) and Samsung 840 EVO (data). Since a few weeks ago, I started seeing a pop-up message, whenever I boot the computer. It says that "A digitaly signed driver is required". Also, the Samsung Magician software reports, that AHCI Mode is deactivated and SATA Interface is N/A. Does that mean that my system is not running on full performance? And is there are solution for these issues? Thank you! 

More replies
Relevance 52.48%

Hi i am resetting up our file server and i have to parations one for Windows which is the c drive. One for data which is the F drive. I want every one at my work to have access to the files and folder, but i want to stop every one from deleting them. What permissions do i need to set on the root of the F drive so it propagates to all the subfolders and files so i never hear the pharse, my stuff is gone.
Thanks
 

More replies