Computer Support Forum

Active Protection System for X1 Carbon

Question: Active Protection System for X1 Carbon

System Update is offering Active Protection system for my X1 Carbon. Why? The readme says it is for Hard Drives and I use it on my X230. But why is it offered for my X1. The display driver System Update offers will not install. Yes, System Update is up to date. Can Lenovo Technical Support shed any light or do I need to call them. Thank you.

More replies
Relevance 100%
Preferred Solution: Active Protection System for X1 Carbon

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 75.44%

hi, I'm using t420. I've replaced the HDD with a Crucial M4 SSD. I have some questions. The HDD will stop when a shock detected by TheThinkvantageActiveProtectionSystem. But now i'm using a SSD, I don't know that the Disk can be caused by stopping when a shock detected. Should I worry about it?

Answer:The Thinkvantage Active Protection System-Lenovo airbag protection

An SSD has no moving parts so there's no need to run APS. If you don't have any HDDs inside your T420, e.g. in the Ultrabay or mSATA, you can just uninstall APS altogether.

8 more replies
Relevance 68.88%

Is it good to be running the APS or is it only needed if I ever drop the computer? Why are there two different beeps, one is louder and longer, the other short and quiet.......... whats the difference between them? Its weird because I only had one of the beeps for about a month and a half. And can I run APS but turn off the beep (dont recall seeing an option for this)? It beeps a LOT on the less sensitive setting even.. even being gentle picking it up...

Answer:Active protection system

The APS parks your hdd head when you accidentally drop it, while the resting hdd can usually take 240 to 400 g shock, a working hdd with the head assembly reading the platter usually can take 50 g, which is equivalent to 1 m fall. However, it depends on the angle of drop so a failure of the hdd is possible even you drop it at 20 cm. The head assembly is only around 0.1 mm from the platter, and any scratches to the platter will cause irreversible damages to the data. Regarding the beep, i am not so sure. 

1 more replies
Relevance 68.88%

Hello :-) I have a question (and I should mention that I haven't got much experience with computer stuff ;-) ):I really need the Active Protection System for my notebook (R61i, windows 7), but version 1.71 (the only available one on the support site) just works with 64-bit. Does anybody know, whether or when there is a new version for 32-bit?Thank you very much!Ellen PS: Sorry for my bad English...













Solved!

Go to Solution.

Answer:Active Protection System

 Hi Ellen and welcome to the forum, You can find the 32 bit version for Windows 7 here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-53150 You could also download and install Lenovo System Update:http://www-307.ibm.com/pc/support/site.wss/MIGR-73695.html System Update will check for new drivers and software from Lenovo for your computer and give you a list where you can choose what you want to download and install and it will be installed for you without having to download and install each one of then manually. It should also give you the option to download and install Active Protection System. It's also a nice tool to check for new versions of the drivers and Lenovo software for your computer. -gan

5 more replies
Relevance 68.88%

After getting my new Seagate Momentus 7200.3 320GB drive working with my X60 Thinkpad (1706-M7M) running XP Pro, I noticed that the HDD active protection system has disabled itself. Is it not compatible with my new drive?

Answer:X60 HDD Active Protection System

You have two accelerometers now! Your ThinkPad has one (Active Protection), and so does your new hard drive (Seagate G-Force). I don't have personal experience with this, but it's possible the Seagate G-Force software disabled Active Protection. You may be able to re-enable it and run both in parallel. I have no idea how they interact. Either one should be sufficient to protect the drive. Perhaps someone with experience could chime in?

1 more replies
Relevance 68.88%

Hi, When i reinstall Windows 7 Starter i cant find "active protection system" in download center (for this model).Afterall i download from other model, but still same application (from lenovo site).System return request "your system doesnt support this...". I remember one year ago i have no problem with that application. Windows 7 Starter 32 bit. Clean system. Like always. Please help me













Solved!

Go to Solution.

Answer:Active protection system s10-3s

I found it !  s10-3s aps 32bit soft

1 more replies
Relevance 68.06%

I bought  lenovo edge E440 about a month ago, and today got this problem, what should I do? 

More replies
Relevance 68.06%

it seems such a handy a unique software but why isn't it available for windows 7 64-bit users ? when do we expect it to come out













Solved!

Go to Solution.

Answer:Active Protection System for Windows 7 64-bit ?

http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67046
 
This should do it.

1 more replies
Relevance 68.06%

I'm always weary about third-party software and things extra to windows...specially programs that start themselves during windows boot. So I'm wondering about ThinkVantage Active Protection System...do I really need it on my T440s? I've read it acts like an airbag to protect the HDD incase I drop or bump my machine. but what If its always sitting on my desk and I never drop it or bump it...then do I still need to have it installed?













Solved!

Go to Solution.

Answer:Do I really need ThinkVantage Active Protection System?

As long as your machine is runing a conventional hard drive and not a n SSD, I'd keep the APS installed. If you feel that it interferes with the operation of HDD, you can change the settings and make it less sensitive.
 
My $0.02 only.

4 more replies
Relevance 68.06%

HII just bought a new e530c laptop. and i want to install active protection system on win7 64 bit. but in support website, there is no driver for x64 APS win7.there is a driver for 32 bit APS win7 driver.how can i find it?thanks alot.

Answer:Active Protection system for Win7 x64

Hi Ehsanb65,
 
Welcome to Lenovo Community Forums!
 
Below is the link to download active protection system for Windows 7 64 bit.
 

Active Protection system for Windows 7 x64

 
Hope this helps!
 
Best regards,
Mithun.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 68.06%

My X301 came with pre-installed Samsung SSD 128 GB and Think Vantage Active Protection System (TVAPS),TVAPS is automatically launched at start-up and is always running.The question is: do I need TVAPS or can I uninstall it?Why was it pre-installed by Lenovo in a machine with an SSD? Thanks for your opinions. Occam





__________________600, R52, T61p, X301

Answer:X301: SSD and TV Active Protection System

Go ahead and uninstall it, it's in the image as some systems have "normal" hard drives.

3 more replies
Relevance 68.06%

Hey, I got this problem. I just did a clean install of Windows 8.1 64-bit on Thinkpad Edge 15 and I downloaded this great tool Active Protection System, which worked perfectly on my Windows 7 before. When I open up the program and shake my laptop it shows that shock is detected and shows that harddrive is stopped and while watching a movie the picture doesn't freeze, which means it isn't stopped. The sensitivity is set high and I disabled "Apatively ignore frequnet shocks". Is this a common problem for Win 8.1 or do I have to install something more?

Answer:Edge 15 Active Protection System on Win 8.1

This is probably about the driver but I can find it.

2 more replies
Relevance 68.06%

Does the Active Protection System protect a HDD in the UltraBay of the W520?  I have a 750GB WD Scorpio Black using the Ultrabay adapter from NewmodeUS.  This page says it protects Ultrabay drives in some T series ThinkPads, but doesn't mention the W series or W520 specifically.

Answer:Active Protection System for Ultrabay HDD's

It does. It even protects an HDD connected via eSATA.

1 more replies
Relevance 68.06%

My T61 came with a Seagate Momentus 120GB 5400.3 HDD. My HDD is reaching capacity and I would like to upgrade my HDD to 250GB - 500GB and thought a larger Seagate would be compatible with ThinkVantage Acvtive Protection System. Whilst looking at HDDs on Newegg I found a Seagate Momentus 500GB 5400.6 HDD, yet a comment about incompatability with Lenovo's firmware http://www.newegg.com/Product/Product.aspx?Item=N82E16822148371 Will a 250GB, 320GB or 500GB Seagate Momentus Harddrive work with ThinkVantage Acvtive Protection System?  Have others upgraded their HDDs with any of these HDDs and had any issues with ThinkVantage Acvtive Protection System? TIA    

Answer:Upgrading HDD on T61 - Active Protection System

i just buy it from MSY stores in Australia, everyone of their drive works with the APS on Thinkpad, since i have got all the brand they sell.

4 more replies
Relevance 68.06%

"Active protection is not functioning as system detected the abnormal sensor status. To diagnose the sensor device, run PC DOCTOR DOS - HDD Active Protection Test and if it still shows, contact Help and Service for repair" My X61 sometimes once in 3 days my active protection will stop functioning and appear error as above. Im running Windows XP SP2 on it. I done the PC Doctor test on the drive and below is the result: ==================PC-Doctor Test Result Log==================Hard Drive: ST9120822AS  Hard Drive: SMART Status Test...Passed  Hard Drive: SMART Short Self Test...Passed  Hard Drive: SMART Extended Self Test...Passed  Hard Drive: Random Seek Test...Passed  Hard Drive: Funnel Seek Test...Passed  Hard Drive: Surface Scan Test...Passed Need advice and how to solve this. Thank you

Answer:Active Protection System error

You are not alone, We are having the same problem, it only different is that Im running on window vista SP2. It seem appear after the latest update, after 1 day of update. The PC DOCTOR did not help at all, just wasting my time by running this test. Appreciate if anybody can help or at least how to reverse the install latest update.

4 more replies
Relevance 68.06%

Hello! I?m hoping that someone here can answer this question ? is APS running all the time, even if the laptop is at a Windows login box with the lid closed? I work as a tech at a K-12 school district.  In our JH/HS building, we have 18 Bretford carts with 14 Thinkpad laptops on each (a mix of R61 and R400 machines, all running APS).  Once the laptops are started each day, the teachers want to have students log off instead of shut down before placing them back in the cart and taking the cart to its next assigned classroom. The classrooms in this building have a ½? lip at the doorway that cart has to traverse when going in and out.  Of course, the teachers have the students take the carts to their next location instead of doing it themselves, so the carts tend to get rough treatment especially when negotiating that doorway lip.  I'm not aware that logging off and closing the lid will park the hard drive head.  If APS isn?t running all the time the laptop is turned on, then there is potential for hard drive head damage during transport, and we would insist that the laptops be shut down for transport to their next destination. Any info would be appreciated.Thanks

Answer:Active Protection System question

APS is NOT running as a service.
 
The Startup will be found in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and will be executed after login.

1 more replies
Relevance 67.24%

Hi, I upgraded my IdeaPad U160 to Windows 7 64bit, and the download pages do not show any APS drivers. The driver that was stored in the software partition on the hard drive does not work with 64bit; in fact it prevents Windows from booting even in safe mode, so that I had to use a partition image to restore the system. Does anyone know where to download this driver? I tried the driver for the U330; it did install, but it reports very abrupt motion and parks the HDD heeds while the IdeaPad is rock steady.  I do not know if it is the wrong driver or if the motion sensor does not work correctly. Best regards Mandos













Solved!

Go to Solution.

Answer:U160 APS (Active Protection System) driver

try this first, if it doesn't work, take a look at this thread.

3 more replies
Relevance 67.24%

Hi, Every time I try to install ThinkVantage Active Protection System, I get this error on the setup "This installation package is not supported by this processor type." My processor is an Intel T3400. Thanks,Daniel

Answer:ThinkVantage Active Protection System will not install

Hello mate, You need a ThinkPad to install Active Protection System, i don't think it will work with a Lenovo 3000.





__________________________________________________________________________________Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

1 more replies
Relevance 67.24%

So, I'm thinking about buying a new hard drive for my ThinkPad T61, and I was wondering what (if any) third-party drives will work with active protection system? Thanks in advance!

Answer:Active Protection System and new hard drive?

I know WD 500GB works & I don't think it matters as I've used others as well





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

2 more replies
Relevance 67.24%

Hello all, I am looking to upgrade the hard drive in my T61p, however my only reservation is the active protection system. I would like to keep this feature, and was unsure if the sensor for this was on the Lenovo hard drive itself or if it was elsewhere on the system. I would like to install a Western Digital hard drive and retain the active protection system. Does anyone know if this is a problem? Thanks in advance.













Solved!

Go to Solution.

Answer:Active Protection System Sensor Location

the sensor is on the motherboard. and some hdd have an additional sensors on them too.  I have a WD 500 gig in one of mine T61 that i replaced last week, so it works okay. Any SATA hdd with 9.5 mm thickness and 2.5 inch factor is okay for your laptop. 

2 more replies
Relevance 67.24%

I wonder why aps is not available for T520. Is it because the laptop has an ssd?





Thinkpad T520









Solved!

Go to Solution.

Answer:Thinkvantage Active Protection System For T520

HiIs the OS on your laptop fresh installed, not Lenovo preloaded?

5 more replies
Relevance 67.24%

I have a Ideapad U350 with Windows 7 Home Premium 64-bit. I haven't found a newer version of Active Protection System software (I have installed version 1.70.06). Can you help me please with a download link for the latest version? Thanks!

Answer:What's the latest Active Protection System firmware?

check download page

3 more replies
Relevance 66.42%

So the Power Manager's InstantResume requires that Active Protection System to be enabled.  This is rather stupid and annoying for laptops that has SSD installed. Is there some option that I am missing to enable InstantResume without Active Protection System being ON?  If not, I would greatly appreciate that this be fixed.. thx!

More replies
Relevance 66.42%

I was trying to find the Active Protection System software for Win8 for while now, it's just not coming up anywhere. I really need to disable the disc freezing feature on my V570 cause it's super annoying (especially when watching videos).Does anybody know of a place whether the software is available? I've tried the Win7 version, but there are some compatibility issues, so it doesn't work....Also, if the software is not available yet for Win8, are there other ways of turning this thing off (BIOS, registry)??? Thanks!













Solved!

Go to Solution.

Answer:Lenovo V570 Active Protection System on Windows 8

Hi armenicum
 
Welcome in Lenovo Forums
 
the 7 generations of lenovo unit are not covered for windows 8 software's , also it cannot be accessed through the Bios or even the registry
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 66.42%

I just got a 128GB SSD. Also, because I never use my DVD drive, I bought an Ultrabay SATA HDD adapter so I could continue to use the factory hard drive for mass storage. (128 is a *bit* smaller than I can comfortably use.) Is it possible to set up Active Protection to only stop the second hard drive and ignore the SSD upon shocks? Or am I faced with the choice of unnecessary interruptions on my SSD if I want to keep protection for the secondary drive? Could leaving Active Protection on damage the SSD? Thanks in advance. -awa64

Answer:W510 - Active Protection System with two drives, one SSD one traditional HDD?

Just install APS. The SSD should ignore the suspend command issued by APS and hence not be affected by APS in anyway.

1 more replies
Relevance 66.42%

Hi, I am using a X61 and when i resume from standby, the active protection system will be disabled. I need to reenable it again. Resuming from hibernation does not have this problem. Note: I just got a replacement harddisk from ibm. Its a fujitsu 120gb MHZ2120BH G1. Firmware: 0084000A Machine:X617674FY8 Using Windows XP service pack 3. Any idea of how to resolve this issue??

More replies
Relevance 66.42%

Hi all, Ever since I installed an update for the ThinkVantage APS (Active Protection System) my computer has crashed almost every time it suspends the HDD. This has become a niusiance, and I have disabled it for now (Rendering my PC unsafe).  Anyone else having this issue? The crashes are BSoD's, and the errors I get are KERNEL_DATA_INPAGE_ERROR or CRITICAL_PROCESS_DIED. 













Solved!

Go to Solution.

Answer:Twist Crashing due to Active Protection System (BSoD)

I'm not aware of this problem, but are there any dump files on your computer?
Look in the C:\Windows\Minidump folder, is there any .dmp file there that corresponds to the time/date that a BSOD happened?
If so, and if you can post the .dmp file to dropbox/yousendit/box/etc and share the link, I can look it at.

4 more replies
Relevance 66.42%

On my Windows 7, APS works well with an icon on the system tray. But in Ubuntu (13.04), because of no driver, I dont know if APS works or not. The question is: does it still work silently without the driver on Ubuntu?If APS doesn't work, is my laptop harmed when it's shaken?Does Lenovo have any solution to get ASP worked on Linux (Ubuntu)?













Solved!

Go to Solution.

Answer:Questions about T410's Active Protection System on Ubuntu

If no answer can be found as with another commenter below, now is the time if there was ever one, to buy a(n) SSD. They are considered more rugged than a spinning platter, have no need to defrag, are lighter and smaller than a disk, - 1 1/8" size. However for all of their attributes, they command a price premium.  Regards,-30-





I love my LENOVO.T 410s, WIN 7, 128 SSD, 64 Ult.I do not work for LENOVO.

2 more replies
Relevance 66.01%

ThinkVantage Update is showing an update to the APS.  New version is 1.77.0.8, current version is 1.77.0.5.  When I install then restart it just says 'one update failed to install'.  How can I install this? [Edit] I uninstalled it then ran the update and it wouldn't download.  So I went the Lenovo driver download website and noticed that 1.77.0.5 is the current version for my computer, so maybe 1.77.0.8 doesn't exist?  I downloaded 1.77.0.5 and reinstalled that, 1.77.0.8 is still presented by the update program though.  Why is the Update program suggesting it then?  This isn't the first time I've have ThinkVantage Update present the wrong drivers.  http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Can-t-install-updates-for-Intel-WiDi-or-W...

Answer:[W520] Thinkvantage Active Protection System update not installing

Hey biznatch,Thanks for reporting this.Checked in TVUR it is showing 1.77.0.8 but its only for 64bit and 1.77.05 for 32bit Win 7.Will escalate this to the team for their assistance.

6 more replies
Relevance 66.01%

Hello, I am using P70, and installed M2 SSDs for system partition,and replaced the SATA HDD by SSD.It seems to me that active protection system is no longer necessary for this configuration,However, the active protection system background application is keep running.I consulted Lenovo engineer, he suggested me to go into the device and printer menu, and then turn off the protection.I found that there was no such options inside the menu, and it was not provided at Lenovo settings either. It seems to me that although the resources that the app is taking is not much,if the user feels it no longer necessary, there should be a way to stop running it,in "Official, Supported" way..Is there such a way that I haven't tried? Or is it not yet to be supported? Currently I installed W10 enterprise on the system over W10 Pro, which was preinstalled.If it was the cause of the problem, I am also curious that is it legitimate to me to ask for any patch (or anything...) for this kind of problem. Thank you in advance.


























deviceNPrinter.png ?169 KB

Answer:how to remove active protection system background application from startup

Hi Parkyere, 
 
Welcome to Lenovo Community! And happy to have you here.
 
As I understand that you have query regarding Lenovo Active Protection System in your P70
So try to check in Control Panel-> System and Security -> Lenovo Airbag Protection -> adjust protection settings
You can disable it from there. Or else uninstall it from Programs & features.
 
I hope the above information helped you.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 Regards,
Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

3 more replies
Relevance 66.01%

hi all: why is that the code "hard drive active protection syste" not listed in "critial updates" or "recommendated updates" of the "system update" version3.14? it is not even onthe list of "optional updates". is it a mistake or for some reasons? i just reinstall the whole thing (xp pro) after two years running (t60p) and noticed this.

More replies
Relevance 65.19%

Hi everyone, We supplied 4 x Lenovo ThinkCentre M93P Tiny Desktops (Model: 10AB003SAU) to a business customer earlier in the year. They are all running Windows 7 64-bit with 500GB 7000RPM SATA drives. Late last week to early this week (approx 17 April 2015 to 20 April 2015) an update came through Lenovo System Update for Lenovo Active System Protection V1.0.0.21 which the customer installed on all four of their systems. Since then, all four systems have been hanging & locking up during use & then require a hard reset for the systems to be usable again until the problem reoccurs next time then the same thing over & over. I spent a heap of time going over the systems trying to work out the cause of this issue which has cost me an absolute fortune in lost productivity & lost revenue. It also lost the customer a lot of time & renenue due to the systems being problematic over a number of days. Thanks very much Lenovo! Won't get any of that time or lost labour back! Customer is furious with both us & Lenovo over this matter, we will likely lose future business due to this. Hoping this may save someone else a major headache if they see this post early enough as I assume problem would be relatively widespread if people are using Lenovo Update. If anyone else has or had this issue recently then please comment. Very disappointed with this probl... Read more

Answer:** Lenovo Active Protection System V1.0.0.21 Causing Windows 7 64-bit to randomly lock up **

I just had the very same problem with a 10A5 0006 (M93 without "p"). Customer reported the issue on Friday, 8th of May after apparently suffering silently through the issue for a few days already, saying that it becomes worse, and that he has to restart the machine sometimes every quarter of an hour. Thankfully customer was able to say that the problems started in the last week of April already, and indeed, on the 16th the machine last installed Windows Updates, and on the 19th the aforementioned Active Protection Of Doom 1.0.0.21. I already began back tracing (read: uninstalling one by one) the updates from that day when I stumbled over your post. In all fairness, I would probably not have even touched the Lenovo update, thinking first of a MS foobar. This post saved me from having to invest several hours of time, not to mention that I will be now prepared if the next machine with the similar issue comes around the corner (I need to service roundabout 50 M93p's from the last half year, I betcha there will be more) Thanks 

9 more replies
Relevance 65.19%

Hi there,I am an X220t owner and my APS doesn't work after an modification. I used to have an HDD in SATA3 slot as boot&system drive and APS works well. Now I have an SDD at mSATA slot as main drive and HDD is set is still connected. When I shake my device, the APS software detected the position of my laptop but it doesn't stop my HDD. I guess APS only protect system disk, and if it does so is there anyway to let APS back to work?Thanks (and sorry for poor English... not an native speaker

More replies
Relevance 65.19%

My wife received her new Ideapad Y530 40512UU last week.  So far she likes it very well but I have been wondering if it has the Active Protection System included on it.  I have the Thinkpad T400 and like the APS feature.  The specs on the Ideapad seem to indicate that it is included on many models but I can't find anything in the config that would lead me to believe that it is active on her system.  Is there any way that I can check it without the Thinkvantage Active Protection System properties utility that is included on the Thinkpads?

Answer:Ideapad Y530: Active Protection System for hard drive included?

Bump

2 more replies
Relevance 64.37%

Hi all, I have a 500 GB hdd 7200rpm which I purchased from lenovo and a hdd caddy which is the slim one (so there is a slight gap for those that are curious) on the thinkpad t510. what i am wondering is i have dual boot on it (linux on the 500gb) and i am wondering if when I am using windows, does the second hdd still get protected from shocks and other potentially damaging harm from the active protecttion system which is present for the hard drive which came preinstalled on the laptop













Solved!

Go to Solution.

Answer:Does Installing hard drive in ultrabay slot get benefit of active protection system?

Based on the marketing material, it seems that the UltraBay has that feature as well.http://www.pc.ibm.com/us/think/thinkvantagetech/aps.html

5 more replies
Relevance 63.14%

I plan to replace the OEM hard drive on my ThinkPad X60 with a Western Digital Scorpio Black drive. I found a board posting on Scott Mueller's Upgrading and Repairing Forum site that seems to indicate that APS will work with this drive. Here is my question: Is there any point in purchasing the drive with the free fall sensor option? (This is more expensive than the drive without the sensor.)  Will this provide any additional protection above and beyond the Active Protection System. Will the internal free fall sensor in the drive be compatible with APS?  In other words, should I buy a Scorpio Black with or without the free fall sensor? Thanks!

Answer:ThinkPad X60 Replacement Hard Drive - Will free fall sensor work with Active Protection System?

Welcome to the forum!If I were buying a replacement drive, I'd get one without a sensor, but that's me.Having seen way too many laptops that have gone through a real "free fall" I'll say that a damaged hard drive in such an event is usually the least of one's problems...Good luck.

3 more replies
Relevance 54.12%

Hi there...  First time user,  just bought an X1 Carbon Gen 3, still waiting on delivery.I'm currently using a Sony Vaio which has a dedicated Active Capacitive Stylus which I love.  I bought the high res touch screen model of the X1 but it doesn't come with a pen, so I'm wondering if it is capacitive and if so could someone recommend a pen.  I'm giving my wife the Sony, which means she'll get my beloved pen too, which is a bummer.  Thanks

Answer:X1 Carbon (3rd Gen, 2015) "Active" Capacitive Stylus

Good day and welcome to the community.
 
Congrats on the Carbon3! Great machines, IMHO.
It's definitely a capacitive touch screen, so you should be able to use the capacitive pen of your choice.
 
Cheers.

2 more replies
Relevance 53.3%
Question: Active Protection

Thinkpad 440p Win 10 Pro. I installed Lenovo Active Protection, which shows up in Control Panel as Airbag Protection. Seems to be working as the animation in the Control Panel applet shows motion and protection control. There is no icon in the notification area. As I remember there used to be an icon. Hovering over it would bring up the name TP Shocks, Is the absence of the icon by design?



T520 4239-CTOT61/p 6459-CTO (Gone but not forgotten)A31/p XP Pro 1 gig memoryA30/p XP Pro 1 gig memoryTP600 Win 2K 288 mb memory701C Win 98 Don't ask

More replies
Relevance 53.3%
Question: Active Protection

What active protection are people using and why?For me it's...AVG: Free, low overheads, easy updates, no conflicts, simple to use, has a scary virus alert picture.SYGATE: Free, simple to use, gives good control & information.WINPATROL: Free, simple to use, the barking dog.Needless to say I have all the other anti-everything scanners but only the 3 above are active.

Answer:Active Protection

What is WinPatrol?I make use of the following:Kaspersky Anti Virus 5.0 Personal Warez. Would switch to AVG Free. But works too well for the time being. Sygate Personal Allows for better configuration than the free variant of ZoneAlarm. Program control. Qtec Router filters out everything else.Windows Antispyware Novelty application. Qtec Router Firewall Nothing gets through.

12 more replies
Relevance 52.89%

System crashes any time I attempt to move the laptop when not plugged in.  Overly sensitive and almost impossible to use in mobile format.

Answer:T61 - Testing Active Protection (APS)

Welcome to the forum.
 
You can easily adjust the sensitivity of APS. Double-click the APS icon on the system tray to bring up the property sheet as below:
 

1 more replies
Relevance 52.89%

Hello, Why do we need the Active Protection System on an SSD disk (X300)?  

More replies
Relevance 52.89%

So I found this as I was trying to find out how to send a false positive to McAfee Avert Labs and was intrigued so I tried it.

McAfee Active Protection

I was first puzzled by its description so I googled it and found out it was actually the Artemis Technology. Here's the article I read about from McAfee:

McAfee, Inc. Reinvents Computer Security

After reading that I was so impressed and tried it. I was not contented of how McAfee secures my PC so I needed to find a way to boost it's protection. When the installation was completed I downloaded some fresh Malware from the Malwarebytes forum and was surprisingly startled as how McAfee blocked off almost every malware I downloaded. I accept any criticism from anybody who hates McAfee but I was proven that I might stick with this one for a while. I am open to any opinions on what I have found.

Answer:McAfee Active Protection

If I can remember correctly, in newer versions of Mcafee Security centre you should already have Artemis preinstalled. And have settings where you configure it (on that install you were talking about, you can't configure it), So there shoulnd't be any need to additionally install it.
But I can't remember clearly. Maybe they have implemented Artemis only for some products.
But I don't think so, I think all McAfee now have Artemis preinstalled eventhough they don;t have configurations.

Artemis is very good addition to McAfee but it's is known for it's relatively high false positives rate.
Basically, Artemis is cloud scanner. If scanner detects something suspicious it will send it to the cloud scan and scan it there.
Detctions from Artemis will be called Artemis! and some new generated number or something like this. So actually you will know that it was detected by Artemis.

1 more replies
Relevance 52.89%

I just changed the hardrive on my R60 Notebook., unfortunately I am unable to reactivate the sensor chip suppose to protect the hardrive in case of imminent chock. What are my options, does someone is familiar with such situation?Thank you for your precious timePATRICK

More replies
Relevance 52.89%

if i need Active protection on my X300 laptop or i can uninstall it?(ssd)Message Edited by Leroy on 02-09-2009 12:20 PM





Lenovo X300 + MBP + HP

Answer:i need Active protection on my X300? (SSD)

what more i can uninstall from lenovo standart package? for example -  diskeeper lite?





Lenovo X300 + MBP + HP

2 more replies
Relevance 52.89%

Hi,   I have an X60 Thinkpad and when I rebooted, I got the following error, "Active protection is not functioning as system detected the abnormal sensor status.  To diagnose the sensor device, run PC DOCTOR DOS - HDD Active Protection Test and if it still shows, contact Help and Service for repair."   The only problem is, my laptop only came installed with PC Doctor 5 for Windows and when I run it, I can't find any way to test the Active Protection System.  Help!
 
Note from Moderator: Please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you.Message Edited by andyP on 06-13-2008 08:45 AM

Answer:Active Protection Error

I have the same problem,help me!

6 more replies
Relevance 52.07%

So I have taken to watching videos on the bus with my Z60m now, the only issue is that it seems the active shock protection program is kicking in way too much and just ruining my enjoyment.  I turned it to low sensitivity and flicked on the check box for "I ride the bus" and it seemed to help a bit, but only by about 50%. My question is thus: If I just turn it off completely, is the HD inside going to be damaged?  Is this program just extra insureance and not needed for normal things?  I would not mind a bit of insight as to someone one who may have turned it off for a road trip or something.... Thanks ! 

Answer:Active shock protection - a question...

sfraden wrote: My question is thus: If I just turn it off completely, is the HD inside going to be damaged?  Is this program just extra insureance and not needed for normal things?  I would not mind a bit of insight as to someone one who may have turned it off for a road trip or something.... Thanks ! The APS was designed to add extra protection to your unit. It's not required, but it's normally recommended.Take a look at this guide and let me know if this answers all your questions.  http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-53167 In terms of removing APS, you could , but we'll leave that decision up to the individual user. Hope this helps. Mark





 Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

1 more replies
Relevance 52.07%

Do you recommend joining or not joining the Microsoft Active Protection Service, and why?
I just got a new laptop with Windows 8 and in setting it up it makes an offer to join.

Answer:MS Active Protection Service: Should You Join?

I do because their (AV providers) security will improve as samples of user encountered malware are sent back to them. Symantec and many other AV vendors have the same feature... Any reputation-based AV must develop the "reputation" of the file(s) somehow...

1 more replies
Relevance 52.07%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD FX(tm)-6100 Six-Core Processor, AMD64 Family 21 Model 1 Stepping 2
Processor Count: 6
RAM: 8092 Mb
Graphics Card: ASUS EAH5450 Series, 1024 Mb
Hard Drives: A: Total - 76316 MB, Free - 49397 MB; B: Total - 953867 MB, Free - 507856 MB; C: Total - 953766 MB, Free - 901056 MB; D: Total - 305234 MB, Free - 288526 MB;
Motherboard: ASUSTeK COMPUTER INC., M5A97 R2.0
Antivirus: avast! Antivirus, Updated and Enabled

In the last 12 to 14 days, I have been experiencing an intermittent problem when I attempt to check my email with Incredimail. Incredimail is set to check my email hosted by my ISP first then any other accounts. Periodically, when I check my mail I get a message stating : Failed to connect to the Incoming Server "mail.xxxxxxxx.com (x's being the ISP name). Please try again later. Then below that, there is a small box which states : ERR: Intrusion Protection active for XXX.XXX.X.XX (the x's being my IP address)

I will get this message for most of the evening. However, the next morning, everything will be fine until later in the evening when this all starts again.

I run Avast free and it is active and updated. Superantispyware updated as well as Malwarebytes updated. I ran all three yesterday with expected results (no virus, spyware or malware). I suspended all antivirus, spyware and malware programs and tried to log into my e... Read more

Answer:Solved: Intrusion Protection active for xxx.xxx.x.xx

16 more replies
Relevance 52.07%

Greetings,A coworker told me to run Combofix on a machine that would not allow Vipre's Active Protection to run. Upon completion, Vipre runs normally. I did a search, found this site and am posting the logfile to get assistance with this to ensure there is no lingering infection. I understand that I should not have run Combofix first, but can't undo that now. I have one more machine that I ran this on and will post that log in a separate post.The log file from Combobix follows:ComboFix 10-07-19.01 - Administrator 07/19/2010 15:21:44.1.1 - x86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1022.747 [GMT -5:00]Running from: c:\documents and settings\administrator.BCHC\Desktop\ComboFix.exeAV: Symantec AntiVirus Corporate Edition *On-access scanning disabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\documents and settings\MGordon.bchdomain\Local Settings\Application Data\Windows Serverc:\documents and settings\MGordon.bchdomain\Local Settings\Application Data\Windows Server\flags.inic:\documents and settings\MGordon.bchdomain\Local Settings\Application Data\Windows Server\uses32.datc:\windows\system32\18467.exec:\windows\system32\41.exec:\windows\system32\6334.exec:\windows\syst... Read more

Answer:Vipre Active Protection would not run/ Computer 2

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEmsconfigsafebootminimalactivexdrivers32netsvcs%SYSTEMDRIVE%\*.exe/md5st... Read more

18 more replies
Relevance 52.07%

I'm looking for a small app that I can install to scan my system for malware.

I do not want "active protection" of any sort.

I don't want new entries appearing in my services configuration.
I don't want any new background processes.
I don't want email, boot sector, memory, etc protection.

I just want a scanner that runs when I tell it to and closes when I'm done.

They don't seem to make anti-virus software like this anymore. Every app I've come across has been loaded with garbage that clogs up your system. You can't even terminate most of these apps without uninstalling them. Not even AdAware works the way it used to.

I've tried AVG, Avast, Norton, NOD32, Kaspersky, and others whose names I've forgotten.

I use Anti-Malware now but that's it. I'm looking for a bona-fide virus scanner of the same sort, but maybe there aren't any?
 

Answer:AntiVirus Scanner without active protection?

ClamWin

Hope it helps
 

21 more replies
Relevance 52.07%

Hello I'm planning to buy a new and larger harddrive (500GB) for my x61 tablet. My Question is: Does the Active Protection System (APS) work with any Harddrive which is able to park heads? In asking because I'm not sure, if the thinkPad recognizes movements with a built in g-sensor inside the laptop (not in the harddrive) or a sensor inside of the harddrive (someone told me, that some drives have a g-sensor built in which APS is using)Can I change the harddrive and APS still works ??  Is there something to think of when changing the harddrive (except copying the system ;-)) Thanks for your helpDitschi

Answer:X61 Tablet - New Harddrive and active Protection

Check the manufacturer's hard drive specifications/data sheet for the support of IDLE IMMEDIATE ATA command which the Active Protection System uses to park the drive head without flushing the cache when the APS is engaged. More information @ http://www.thinkwiki.org/wiki/Active_Protection_System I am personally using a WD scorpio Black 320 GB 7200 RPM drive with free fall sensor which appears to support this feature (I can hear the drive head parking when the APS is engaged and all read/writes are halted). Hope that helps. 

4 more replies
Relevance 52.07%

On my taskbar, the little red shield with an X through it appears. When I click on it, it tells me under "Malware Protection" that "Windows did not find antivirus software on this computer. I actually have Avira on here, and it is working. Could someone please help me find out what the problem is? Thank you so much in advance for the assistance.

---Kate

Answer:Says "no virus protection found" while I have one active...

Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.

28 more replies
Relevance 52.07%

Previous topic here: http://www.bleepingcomputer.com/forums/t/298866/says-no-virus-protection-found-while-i-have-one-active/ ~ OBI was told to post this here instead of where I had it:On my taskbar, the little red shield with an X through it appears. When I click on it, it tells me under "Malware Protection" that "Windows did not find antivirus software on this computer. I actually have Avira on here, and it is working. Even though it works, it ends up freezing every time I run it, and I can't do anything at all, so I end up having to reboot by holding in the power button. Could someone please help me find out what the problem is? Thank you so much in advance for the assistance.

Answer:Says "no virus protection found" while I have one active...

Hi,After reading your other topic; I think you are probably fine and this is simply a problem with your anti-virus not communicating with Windows correctly. You can try setting your Windows Security Center service to automatic and this may fix your problem.Start > type services.msc > find the service Security Center > right click > Properties > change the start-up type to AutomaticReboot. Casey

1 more replies
Relevance 52.07%

I've never posted in this forum before (that I can remember) and if this is in the wrong place, forgive me. I just thought this would be the best place to ask.

Found this link over at SlashDot:
http://www.echannelline.com/usa/story.cfm?item=23681

My take on this is that McAfee would like us to think this is some kind of breakthrough; but, the way I read it, it isn't as much a breakthrough as it is simply a shaving of the response time (and eChannelLine having a slow news day).

Anyone care to comment?
 

More replies
Relevance 52.07%

HardwareX200 Tablet with Active Protection (XP) Is it possible to disable the Active Protection software programmatically? I know we can use the windows Applet to turn it off, but how about through code? Are the settings exposed in the Registry or Config File on the system somewhere? We have a case when we want to disable the software for a short period of time and then enable it. Thanks, Jon RaynorExploria

More replies
Relevance 52.07%

Just a poll to see how people have their MAPS option set within Windows Defender.

Do you have it not joined, Basic or Advanced?

Answer:Microsoft Active Protection Service

Basic here...

4 more replies
Relevance 52.07%

Ok Admin guru's, im gonna pick your brain and expertise. I work for a local IT firm and alot of our clients are small based businesses and a lot of single customers who simply don't the brain power, time or ability to use indepth spyware removal tools and cleaners other then SpyBot and Adaware.

Those work great, WHEN UPDATED AND USED but my company is really looking for an "invisible" solution to where it will sit byitself, keep most of the basic spyware junk out of a machine, update it self with definitions and be intelligent enough to block bad things and allow good data to flow through without throwing up a damn window every single time asking the customer what to do!

We have been using SunBelts Counterspy as a single client and as a LAN based enterprise active protection on our network for the past few months but there is no way to tell it to shut the hell up. Every single freaking packet that passes through WAN connection it asks the client what to do with it. Hell, half the time I dunno what to do with it, so whats the average consumer going to do? I can't give a seminar to every fricking client on Do's and Don'ts, use Firefox, don't go to bad websites that look like 12 year olds built it, don't use P2P programs.

What have you guys been using/recommending to clients? I could really use some feedback as trying to "teach" people how to use the internet saftely isn't working, especially when it comes to ... Read more

Answer:Net Admins: Active spyware protection. What do you use?

Haven't used Sunbelts version..but most centrally managed packages allow you to create a custom configuration to push out to the clients, making it automatically perform actions based on what you say.

What antivirus are you using? I've seen my clients malware problems take a big drop since moving to NOD32 antivirus..since it's quite strong in ad/spyware detection. Kapersky is also very strong in this area.
 

47 more replies
Relevance 51.66%

I just bought a new T400 with a 160 GB hard drive, and I have a spare 320 GB hard drive I'm considering putting in it.  Does the ThinkVantage Active Protection work with any modern internal hard drive, or only the ones Lenovo uses?  If it's only certain ones, how can I find out if the one I have will work with it?  Thank you.













Solved!

Go to Solution.

Answer:Active Protection on Any Internal Hard Drive?

Hi djshack, Your T400 has a built-in accelerometer ("g sensor") which the Active Protection software monitors. If it sees acceleration above a settable threshold, it tells your hard drive to park its heads. Head-parking is a standard feature of hard drives. Thus the system should work with any hard drive compatible with your T400.





---------Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.Did someone help you?Say thanks! with a kudo.Even better: Pay it forward, help someone else.

4 more replies
Relevance 51.66%

Hello. I don't know if i'm in the wrong section of the forum, but i can't choose which section to put this topic in, well. 
I'm trying to install an program into my friend pc, my antivirus (360 Total Security) is disabling me from installing, well, i tried to disable active protection temporarily, i go to the corner of the desktop. See the file named "Capture" in the attachments 
i open the tray. choose protection: on/off. i press off. and there is no buttons on the screen? WTF? See the file named "Capture1" in Attachments
so how i solve this ? FORGIVE ME IF MY ENGLISH IS BAD.
And sorry i can't uninstall this program. as i said it's not my computer

Answer:Can't Disable Active protection in 360 Total Security!

Your English is fine.
 
Something is wrong as you should have two buttons on your first image (Exit and Stay Protected). Try the following. In an admin account open 360 Total Security settings. Under the General tab uncheck the box next to 360 Self Protection. You will need to scroll to the bottom as it's the last setting. Open Task Manager and under the Processes tab highlight QHSafeTray and end the process. It will be a bit before the 360 icon in the system tray will no longer be present. 
 
Try installing the program. To restore 360 Total Security you can either reboot or double click the desktop icon.

2 more replies
Relevance 51.66%

Hi everyone,Eversince I bought my T61p, I have been experiencing bizare hangs, usually when running on battery.The symptoms:All hard disk activity ceases and programs start to hang one after another. The active protection icon is green (HDD is running) but I can't open the application itself. At some point everything freezes, including the mouse. The only way to recover is by powering off. No BSOD or event log entry. When powering on, the Intel Turbo memory reports an unexpected shtudown and initializes itself, showing the progress by printing the percentage.This used to happen after resume from standby, within the next few hours of work.As an experiment I disabled Active Protection and my thinkpad has been working hang and crash free for 2 weeks now, resuming from and going to sleep without any problems.To test if the problem is within Active Protection really, I  enabled it again and I had a hang in the next 20 minutes. I restarted (through power off), suspended the computer, resumed, and after an hour - it hanged.Since than I have my Active Protection disabled and everything works fine.Although I can work with Active Protection off, I prefer it switched on. Any ideas how to fix the problem?I know I am not the only one experiencing this problem (I've seen other similar posts), although it seems that many people still don't know that active protection is the cause. 

Answer:Active Protection causes bizare hangs on T61p

Sounds like a software corruption issue.  I have a T61p and the APS works flawlessly.  The APS software is available on the Lenovo support site so you can delete your existing software and re-install it:  http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-53150 If that doesn't work, the only solution that comes to mind is to do a full system recovery.  





KeithFormerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

9 more replies
Relevance 51.66%

Do you think it's worth it to run the active protection on this program?
 

Answer:Microsoft anti-spyware active protection

If you are not an advanced user or others using the computer are not advanced I would say yes. If you know what you are doing, you should be able to tell when something is f*ing with your system but it is rather handy for people that don't know what that activex control is about to do....
 

5 more replies
Relevance 51.66%

well since it seems some moderator (i will not include the name of this person) decided to delete my previous quesion, despite me not breaking any rules, i will ask again: the thinkvantage active protection wont let me change its sensitivity setting regardless that i have tried in my account and in the administrator account to change it, even though the settings are checked so that the administrator only can edit them, and if i was logged into the administrator account, shouldnt i have been able to have been able to change it? i would assume there is something wrong?

Answer:R61i harddrive active protection issues

taiiat wrote: well since it seems some moderator (i will not include the name of this person) decided to delete my previous quesion, despite me not breaking any rules, i will ask again:the thinkvantage active protection wont let me change its sensitivity setting regardless that i have tried in my account and in the administrator account to change it, even though the settings are checked so that the administrator only can edit them, and if i was logged into the administrator account, shouldnt i have been able to have been able to change it? i would assume there is something wrong? Your message was not deleted.  It was moved to the ThinkVantage Tech board where it has a better chance of getting answered. http://forum.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=4080 Locking duplicated thread.

1 more replies
Relevance 51.66%

Hello, I have the Modelle R400 running Windows 7 Pro (64 bit) on it. If I run Lenovo Vintage Tools programm teh airbag/active protection icon is grey.If I click on it it starts the installer and I can install it but after a reboot it shows me that it isn't installed/grey icon again. anyone can help me? 













Solved!

Go to Solution.

Answer:R400 Active Protection / Airbag isn't installed

How about uninstalling and then re-installing the Active Protection System?

2 more replies
Relevance 51.66%

Hello. I don't know if i'm in the wrong section of the forum, but i can't choose which section to put this topic in, well. 
I'm trying to install an program into my friend pc, my antivirus (360 Total Security) is disabling me from installing, well, i tried to disable active protection temporarily, i go to the corner of the desktop. See the file named "Capture" in the attachments 
i open the tray. choose protection: on/off. i press off. and there is no buttons on the screen? WTF? See the file named "Capture1" in Attachments
so how i solve this ? FORGIVE ME IF MY ENGLISH IS BAD.
And sorry i can't uninstall this program. as i said it's not my computer

Answer:Can't Disable Active protection in 360 Total Security!

Your English is fine.
 
Something is wrong as you should have two buttons on your first image (Exit and Stay Protected). Try the following. In an admin account open 360 Total Security settings. Under the General tab uncheck the box next to 360 Self Protection. You will need to scroll to the bottom as it's the last setting. Open Task Manager and under the Processes tab highlight QHSafeTray and end the process. It will be a bit before the 360 icon in the system tray will no longer be present. 
 
Try installing the program. To restore 360 Total Security you can either reboot or double click the desktop icon.

more replies
Relevance 51.66%

Hey guys

I have a massive drive that I'm afraid is filled with crazy Trojans and stuff.

I want to scan this puppy with as many scanners as possible.

I don't want any "active protection" or any software that will interfere with Windows Defender.

I just want a scanner that will scan a drive.

What I use now:

1) Malewarbytes
2) Emisoft (works GREAT if you haven't tried it)
3) SuperAntiSpyware

Can you guys recommend any light third party scanners to use in addition to this?

Traits I'm looking for:

1) light (no active protection)
2) free

Thanks guys

Answer:Free Scanners (Not Active Protection) For Windows 8

Best of all is "clamwin portable"

4 more replies
Relevance 51.66%

Does anyone know where this driver is for x60 tablet?













Solved!

Go to Solution.

Answer:Active Protection (air bag for hard drive) for Windows 7 64 bit?

this should work: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67046

2 more replies
Relevance 51.66%

Should I turn on the active protection?
How does it impact the system's speed and responsiveness? (I don't care about the increased ram usage, I have enough ram)
I am running windows 10 pro x64 with Windows Defender+MBAE+MBAR+Avira Browser Safety
 

Answer:MBAM Premium -- turn on active protection?

Yes of course,impact on the system is minimal.
 

4 more replies
Relevance 51.66%

I dropped my laptop. (ThinkPad T60p) 
 
At Boot time I get the message: Thinkvantage active protection sensor diagnostics.
Then: hard drive not found.
 
When I replaced the HD with a new one and tried to re-install the OS from the CD I get the same message:
hard drive not found.
 
What is Thinkvantage active protection sensor diagnostics?
How do I fix the problem?
 
Thanks,
Eugene Verne
 
Moderator note; e-mail address removed to stop the spambots getting it

Answer:Thinkvantage active protection sensor diagnostics

Hi Eugene-Verne,While installing Windows from the CD, did you set SATA AHCI to Compatibility mode in the BIOS? If the answer is yes then the hard drive connectors on the laptop may have been damaged due to the fall.Additionally, you can try running HDD diagnostic program from the BIOS to see whether it is even being detected by the BIOS.Hope it helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

1 more replies
Relevance 51.66%

I recently upgraded the OS on my S10-3T to a better version of Windows 7, but when I attempt to download the Active Protection Software from the Lenovo download site, I get a redirect error.  Can you please supply the proper link, I am not comfortable taking this thing around without the Active Protection.













Solved!

Go to Solution.

Answer:S10-3T Active Protection driver broken link?

http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_2334.htmlhttp://forum.lenovo.com/t5/Lenovo-3000-and-Value-line/Downloading-drivers/ta-p/389281

2 more replies
Relevance 51.66%

Hey guys,Relatively happy T61p owner here. I was having BSOD crashes like crazy when I got this thing. Then realized they'd happen even more after using it for games. So naturally I sent it to Lenovo, and somehow after a one day turn around and replacement of the mobo, it was working beautifully. But then I was still getting intermittent BSOD crashes. Though I realized they would only happen when I moved the laptop. The only that would know that I moved the laptop is the accelerometer and Active Protection. After disabling active protection I've been in the free. The laptop finally runs just like it is supposed to. But now I want to get this problem fixed because my mind won't settle if I still know there is a problem. Anyone have any ideas? Or do you think this should just go back to the depot and let Lenovo deal with it?  Thanks!Message Edited by UpIn5mOk3 on 12-28-2008 11:38 AM

Answer:T61p BSOD resulting from Active Protection

No ideas? Darn, I didn't want to resort to sending it back...

1 more replies
Relevance 51.25%

I use my x200 tablet to work as an audio engineer.  Mostly I use it as a control center for several programs that control audio processors in real-time and are designed for touchscreen use and also to playback and record multichannel audio (with an 18x18 ASIO interface).  Therefore I need my laptop to be as real-time stable as possible.  Picking up and moving the tablet quickly or setting it near an array of 21" subwoofers would set off APS even in its most conservative settings so I decided to uninstall APS. After I did this, my laptop would boot normally until you touched the keyboard at the login screen.  You could navigate with the mouse and use it with the onscreen keyboard to login and use XP, although the touchscreen didn't work.  However, if you touched a key on the keyboard the laptop would cease to receive input from the mouse or keyboard until another reboot.  By using the mouse only and reinstalling APS through System Update I was able to fix the problem. I know I can just turn it off in Control Panel, but to systematically decrease the chance of errors or DPC latencies when I'm dealing with live, real-time audio I would prefer to remove features I cannot use.  Does anyone know anything about this problem?  I saw a few other threads on similar topics and people seemed to fix a similar keyboard problem by setting APS more conservatively, but I don't understand why removing APS all together would cause the same ... Read more

More replies
Relevance 51.25%

i have a IBM thinkpad t41, i dun't know why it come out this message "ibm hard drive active protection sensor ", after that it come out ask me to type a password to log in. i never set password at notebook hard drive. pls help me~~urgent!! thanks!!

More replies
Relevance 51.25%

I am seeing 95 MB, without the computer running anything special.
Is this normal?
Windows 10 x64
 

Answer:Ram usage of Zemana Anti-Malware with active protection

I guess it depends on config but on my machine it is still around 66 MB in idle:



I think that you shouldn't bother about RAM usage these days
 

0 more replies
Relevance 50.43%

Should I turn on the active protection?
How does it impact the system's speed and responsiveness? (I don't care about the increased ram usage, I have enough ram)
I am running windows 10 pro x64 with Windows Defender+MBAE+MBAR+Avira Browser Safety
 

Answer:Malwarebytes Anti-Malware Premium -- turn on active protection?

Yes of course,impact on the system is minimal.
 

12 more replies
Relevance 50.02%

On my x61s, running under Vista, for more than a year I found my system intermittently going into an unrecoverable freeze--but only when the system was running on batteries.  Fix: When I disabled the Lenovo "Active Protection System," the problem disappeared and has not come back. (Merely changing the "shock protection sensitivity" did not work.)   O_GovindaX61s 7668-CTO, Vista SP1, 1.6 GHz Core 2 Duo, 2 Gig memory, 160 Gig HDD, turbo memory, and Intel 4965 AGN Moderator edit: Merged both of O_Govinda's threads on same subject. Changed X61 in title to X61s. Message Edited by bananaman on 03-24-2009 10:27 AM

Answer:X61s running Vista on batteries sometimes freezing -- Active Protection to blame?

Does it help if you lower the Active Protection sensitivity (Control Panel > ThinkVantage Active Protection)? If not, and you are still under warranty I would call support.

2 more replies
Relevance 50.02%

I just installed the Thinkvantage toolbox with the Lenovo software updater.  I also installed the current (3.23?) BIOS.  Tried to install the ECP but the install program said it was up to date.  I installed all critical updates and recommended ones. At some point the Active Protection software (v1.33b) decided its hardware sensor was bad.  I ran the POST sensor test for the sensor which did not complain. I tried to install current version of software.  Auto-install didn't work so I tried manual.  It refused to install because it said that Active Protection was not supported on this computer. I reinstalled the v3.19 BIOS, no change except that the update software now lists that as a desirable update.. Active Protection driver version is 1.35 November 10 2009/1.33 June 6 2005.  Device manager shows no flags and I can't find an entry for the acceleration sensor. Can anyone indicate how I can chase this further, or otherwise help to solve it?  The Active Protection system is very important to me. Thanks and regards,David Beierl   

More replies
Relevance 50.02%

Hello, I'm having a few issues and was wondering if someone could offer some assistance. I have a X200 which is running Vista 64-bit OS. I just completed a clean install of Vista-64. Issue #1 (old *.scr file) - Is it posible to run my old Lenovo screensaver post-install? I saved it as a *.scr file to an external hard drive before deleting everything but the file will not work on my clean system by just copying it over into the appropriate folder. I get an error messasge when trying to preview it from within screensaver options. Does anyone have an excutable version of the "Think" screensaver (circa 2009/2010)?Issue #2 (Previous versions of Lenovo drivers) - In the past it seemed to me that installing new drivers on my system has caused certain components to stop working correctly. For example, after an update to the audio last year, I lost sound to my external speaker and just had audio when plugging in headphones. Does anyone know where I could find previous versions of drivers on a reputable website? Specifically, does anyone have a copy of a previous version (circa 2009-2010) of the Conexant Audio driver/software for Vista (64-bit) for the X200? Issue #3 ("ThinkVantage Active Protection") I installed this software and it is working normally. However, although I've selected, "Show active protection icon on the system tray" the icon is not displayed and I would like it to be displayed. Does anyone know what the problem may be? This happened to me before and I ... Read more

Answer:Previous versions of drivers; Screensaver Install; Active Protection Icon

Hi boyouttadabay, Please refer following link for reference. For drivers please install and run system update. How to Use and Change a Screen Saver in Vistahttp://www.vistax64.com/tutorials/85539-screen-saver.htmlSystem Updatehttp://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-66956Fred





T61 + X201i

4 more replies
Relevance 49.2%

I have an SSD installed rather than an HDD.  I uninstalled the Lenovo Active Protection software and there is no trace of the app existing in the Windows registry.  Yet when the X250 boots just after the BIOS POST screen and before Windows starts I see a one line text message reading "Active Protection Sensor Diagnostics Start" for about one second.  What is this?  It looks like there is still some component of the "airbag" system still running.  Do I need to do something else to completely remove it?  Or is this just a message from the system board that cannot be controlled?  I see no options related to it in the BIOS.





.NET Software DeveloperThinkPad T440s (20AQ005TUS) | ThinkPad ThinkPad T430 (2342CTO) | Lenovo H430 (25582AU) | ThinkPad X230 (2306CTO)

More replies
Relevance 49.2%

One morning after I shutdown my laptop to leave for work and start it up again on the train. It gave me the: 2000 thinkvantage active protection sensor diagnostics failed. Everything is working fine. Is there a fix for this? Edit: I realised this is in the wrong section. Can someone help me move this please? Thank you. 

Answer:Thinkpad L430 Error Msg: 2000 thinkvantage active protection sensor diagnostics failed

Does this error only happen when you start up your system on the train, or does this error always happen when you start your system?
 
Active protection (APS) is the HDD airbag function, it detects when the system is moving then it parks the HDD heads in order to prevent damage, until the system stops moving.
 
APS is initialized by BIOS when the system is turned on.  Part of the initialization is running diags on the sensor to make sure it is able to detect a non-moving state.  If the system is being moved while this happens, then the diags fail and that error message happens.  

2 more replies
Relevance 48.38%

Hey there. I use Win 7 x64 SP1 on my T500. I tried to use ESC to contact the support, but either I'm too stupid to use or its just a stupid tool. I can not even post the crash report, because its limited ti 240 (or something) letters. So here are my 3 problems:1. HDD Protection:when starting  "ThinkVantage System active hdd protection" (translated 1:1, maybe not exactly how this tool is called in english version) a "common Windows-Shell-DLL" crashes:Problemsignatur:  Problemereignisname:    APPCRASH  Anwendungsname:    rundll32.exe_Shell32.dll  Anwendungsversion:    6.1.7600.16385  Anwendungszeitstempel:    4a5bc9e0  Fehlermodulname:    aticfx64.dll  Fehlermodulversion:    8.17.10.1052  Fehlermodulzeitstempel:    4db4e550  Ausnahmecode:    c0000005  Ausnahmeoffset:    00000000000321df  Betriebsystemversion:    6.1.7601.2.1.0.256.48  Gebietsschema-ID:    1031  Zusatzinformation 1:    72a9  Zusatzinformation 2:    72a9a6322e2d2a321c2d1b84fba32a94  Zusatzinformation 3:    03cf  Zusatzinformation 4:    03cf2f74a754862dd99623fca14a8e712. regulation of brightness in hybrid grpahics modeif I use hybrid graphis mode, I cannot use the Fn keys to change brightness of the scree... Read more

Answer:T500:UMTS after Standby, regulation of rightness in hybrid graphic mode, Active HDD protection crash

wow, still no replay ?! Can nobody help me with any of these issues?!

1 more replies
Relevance 47.15%

Hi

We have three PCs connected on a network. One is dual boot with Win7 and Win10 (very recently sorted with help from Gregrocker) whilst the other two are both Win7 only with no System Reserved partition. What I want to do is to have both latter PCs with a System Reserved partition and remove the boot files from the OS partition. I know most people seem to want to go the other way but I believe there may be advantages when the time comes to remove Win7 and use Win10 only.

I've been going through the motions of creating a System Reserved partition of size around 100MB (without actually doing it - I can't use Bitlocker and I use TrueImage to backup/restore). However, it goes a bit further than just creating the partition as I have to get the boot files into it. I believe I have to mark the partition as active which would mean the OS partition would become inactive. I would then have to do three repair installs to get the boot files into the System Reserved partition.

I would appreciate it if someone would confirm this or put me right where my thinking is in error. I look forward to hearing from someone on this.

Thanks
Tracey

Answer:Changing from Active OS Partition to Active System Reserved Partition

  
Quote: Originally Posted by traceyw



I believe there may be advantages when the time comes to remove Win7 and use Win10 only.

I've been going through the motions of creating a System Reserved partition of size around 100MB (without actually doing it - I can't use Bitlocker and I use TrueImage to backup/restore). However, it goes a bit further than just creating the partition as I have to get the boot files into it. I believe I have to mark the partition as active which would mean the OS partition would become inactive. I would then have to do three repair installs to get the boot files into the System Reserved partition.

I would appreciate it if someone would confirm this or put me right where my thinking is in error. I look forward to hearing from someone on this.


I'd be curious to know what you think the advantages to this would be "when the time comes to remove Win7 and use Win10 only".

You appear to be on the right track if you want to go through with it, although I can't recall anyone else who wanted to do this. You might investigate the EasyBCD tutorial on this site which is used to copy boot files---typically in the other direction as you mention. I'm not positive, but I'd assume it could be used to copy them in the direction you prefer.

6 more replies
Relevance 46.74%

Current Master Drive (C : OCZ-VERT EX2 SCSI (my SATA Drive) - 60 GB
Current Slave Drive (D : WDC WD10EARS-00Y5B1 ATA - 1 TB

My computer used to have a boot file set on my slave drive, but OS installed on my
master. So i eventually reformatted it so that my boot AND OS was installed on my SATA (master) drive.
Recently a USB gave a conflict to my boot priority and wasn't letting me boot with both my hard drives intact. Solved it by loading start up repair via a win7 disk and "repaired" it.
However, now there's the partition of my slave drive, that is marked as system, active now. Before it was just "unallocated space". How can I "shift" that over so that nothing "boot worthy" or "system active" is part of my slave drive?

Thank you for your time. Please take a look below at the screen shot.

Answer:System reserved partition (system, active) on Slave drive

Disk management (right click on My Computer, Manage, Disk Management) should allow you to simply delete that partition if you don't need it. Just make sure you don't need it before doing so. I'd unplug the slave from the mobo and boot the computer to make sure everything is fine without it.

3 more replies
Relevance 46.74%

I downloaded an .exe file believing it to have been an update for ActiveX. Now, in the bottom right information bar there is a Blue Shield with a white question (?) Mark in the center which flashes into a red shield with a white X. This shield keeps flashing back and forth between the blue and red. Then every couple of minutes this ?alert? flashes from the shield (like a balloon that points to the shield). The alert has a a yellow triangle with a black exclamation point in the center. The alert says: ?System Alert! System has detected a number of active spyware applications that may impact the performance of your computer. Click the icon to get rid of unwanted spyware by downloading an up-to-date antispyware solution.?

I followed the 5 steps and installed and ran spyware blaster and ie-spyad

I am usually so careful about downloading (or so I thought) I was sucked in by this one though. Who knows, there may be others that you might find as well. I appreciate all the help you can give. Thankfully there are good people out there willing to help us out. Thank you Thank you Thank you.

My hijackthis scan is attached

Answer:System Alert! System has detected a number of active spyware

Hello -

Step 5 would have you download and execute Deckard's System Scanner.

Please do this:

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

What DSS will do: create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review. DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

---------------------------------------------------------------------------------------------

1 more replies
Relevance 46.33%

Well recently started to receive a pop up system alert! system has detected active spyware and when i click it it directs me to a website to download a product that will fix the errors. I know this is fake, please help me remove it!!!!!!!!!!!!

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 5:51:40 PM, on 9/18/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Steam\Steam.exe
C:\Program Files\Common Files\Ahead\lib\NMBgMonitor.exe
C:\Program Files\Sony Corporation\Picture Package\Picture Package Menu\SonyTray.exe
C:\WINDOWS\system32\devldr32.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\System32\alg.exe
C:\Program Files\a-squared Anti-Malware\a2service.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\a-squared Anti-Malware\a2g... Read more

Answer:system alert! system has detected active spyware!! HELP!

You should print out these instructions, or copy them to a NotePad file for reading while in Safe Mode, because you will not be able to connect to the Internet to read from this site.

Please download SmitfraudFix (by S!Ri)
Extract the content (a folder named SmitfraudFix) to your Desktop.

Next, please reboot your computer in Safe Mode by doing the following :
Restart your computer
After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, a menu with options should appear;
Select the first option, to run Windows in Safe Mode, then press "Enter".
Choose your usual account.
Once in Safe Mode, open the SmitfraudFix folder again and double-click smitfraudfix.cmd
Select option #2 - Clean by typing 2 and press "Enter" to delete infected files.

You will be prompted: "Registry cleaning - Do you want to clean the registry?"; answer "Yes" by typing Y and press "Enter" in order to remove the Desktop background and clean registry keys associated with the infection.

The tool will now check if wininet.dll is infected. You may be prompted to replace the infected file (if found); answer "Yes" by typing Y and press "Enter".

The tool may need to restart your computer to finish the cleaning process; if it doesn't, please restart it into Normal Windows.

A text file will appear onscreen, with results from the cleaning pr... Read more

1 more replies
Relevance 46.33%

I've had the System Integrity Scan Wizard, PC-Antispyware, and Security System Protection Control Panel popups and my backround change to a blue colour. After reading some of the posts here and running Spybot Search and Destroy, Ad-Aware 2007, RegCure and Malwarebytes Anti-Malware it seems as if that problem was solved, but now everytime I put my pc on I get these messages:The first one says "rundll32.exe - Bad Image : The application or DLL C:\WINDOWS\system32\qpfrsnow.dll is not a valid Windows image. Please check this against your installation diskette" and the second one says "RUNDLL -Error loading C:\WINDOWS\system32\qpfrsnow.dll%1 is not a valid Win32 application".The disk that I got when I bought my pc was Windows XP Home Edition SP1. I downloaded SP2 from the internet.I'm attaching all of the logs you need to assist me, because I don't know if and how badly my pc is still infected.I attached 4 log files: 1. DSS Main.txt 2. DSS Extra.txt 3. Kaspersky 4. DSS Main.txt - after the Kaspersky reportThank you for taking the time to look into my problem.DSS MAIN.TXTDeckard's System Scanner v20071014.68Run by Parratjie on 2008-04-17 09:29:31Computer is in Normal Mode.---------------------------------------------------------------------------------- System Restore --------------------------------------------------------... Read more

Answer:System Integrity Scan Wizard, Security System Protection Control Panel

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Run Hijackthis again, click scan, and Put a checkmark next to each of the lines listed below. Then close all other windows--you should only see HijackThis on your Desktop--and click the Fix Checked button.R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =O4 - HKLM\..\Run: [e43075dd] rundll32.exe "C:\WINDOWS\system32\qpfrsnow.dll",b================Click Start -> Control Panel -> Add Remove Programs and uninstall these programs:J2SE Runtime Environment 5.0 Update 11 Java? 6 Update 2 Java? 6 Update 3 Java? SE Runtime Environment 6 Update 1Reboot and post a new hijackthis log.

37 more replies
Relevance 46.33%

I've had the System Integrity Scan Wizard, PC-Antispyware, and Security System Protection Control Panel popups. They've been very stubborn but after reading some of the posts here and running Spybot, Adaware, SmitfraudFix, Panda Activescan, Housecall, Stinger Avert, Windows Defender, and SDFix, I am now getting only one popup, which shows up as a blank white rectangle in the center of the screen (and now I can't click "Close" to get it off the screen, since the "Close" option is missing). From the size & shape, I believe it's the Security System Protection Control Panel. Would you please review my HijackThis log? Also, in some of the posts I've noticed recommendations to update Java. Is that needed in my case? Thanks very much for your help.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:55:55 PM, on 3/28/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Windows Defender\MsMpEng.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\ccSvcHst.exeC:\Program Files\Common Files\Symantec Sh... Read more

Answer:System Integrity Scan Wizard, Security System Protection Control Panel

The blank popup appeared to be repopulated with information over time...apparently the spyware refreshed itself. I also learned from Task Manager that all of my popups were from the System Integrity Scan Wizard. After some more searching, I found the name (in my case, yzqrqzkp.exe) and told Norton Firewall to block it from accessing the internet. I used HijackThis to fix it and then deleted it and a namesake (YZQRQZKP.EXE-1253B76A.pf) from Windows\Prefetch (not sure that was necessary but deleted it anyway). My only concern is that from what I read, there should have been another copy in \Local Settings\Application Data, which I didn't find. I updated Java per instructions in another post, also turned System Restore off and on. I think the PC is now clean, but would you review my latest HijackThis log to be sure? Thanks very much.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 10:05:26 AM, on 3/30/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Windows Defender\MsMpEng.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Syman... Read more

14 more replies
Relevance 45.92%

I have windows 7 home premuim 64 bit
I went to create restore point on my new dell and after about an 1/2 hour of waiting for SR to open up I got this:

You have no Restore Points. Use System Protection to create restore point.
When I attempt to turn on System Protection, it doesn't show any drives available when it opens -- it just says that it's searching for available drives and it keeps searching and doesn't stop. Eventually, I'll receive the following Error Message:

"There was an unexpected error in the property page: System Restore encounter an error. Please try to run System Restore again (0x81000203)." also all button are greyed out. I wanted take an image to show you but that's not working either. Is there hope?

Thank you.

 

Answer:Windows 7 Home Premuim System Restore and System Protection not working.

16 more replies
Relevance 45.92%

My PC is infected with 3 malware popups named Security System Proctection Control Panel, System Integrity Scan Wizard and Security System Warning (the last one telling me I have Abebot). I have tried to get rid of them with Kaspersky Antit-Virus, Adaware, spyware sweeper, and SpybotSD, but they are still running. I didn't run the online scan by Kaspersky because I have the most recent version installed and running on my PC. When I ran a rootkit scan with KAV, it took just over four hours and reported my PC was clean. So for whatever reason Kaspersky is not picking up these three forms of malware. Following all other directions on your preliminary instruction list I used Deckard's System Scanner to make two Hijack This files. They are pasted in below. Please take a look and tell me what I should do to get rid of this malware. Thank you very much for this valuable service you are providing.-- Dark EagleDeckard's System Scanner v20071014.68Run by Perry H. Chesnut on 2008-04-18 23:11:18Computer is in Normal Mode.--------------------------------------------------------------------------------Backed up registry hives.Performed disk cleanup.-- HijackThis (run as Perry H. Chesnut.exe) ------------------------------------Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:47:35 PM, on 4/18/2008Platform: Windows 2000 SP4 (WinNT 5.00.2195)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Boot mode: NormalRunning processes:F:\WINNT\System32\smss.exeF:\WIN... Read more

Answer:Security System Protection Control Panel & System Integrity Scan Wizard Popups

Hello Dark Eagle. to BleepingComputer.comMy name is Billy O'Neal and I will be helping you. (Billy or Bill is fine, if you like.)Please give me some time to look over your computer's log(s).Please take note of the following:In the meantime, please refrain from making any changes to your computer.Also, even if things appear to be running better, there is no guarantee that everything is finished. Please continue to check this forum post in order to ensure we get your system completely clean. We do not want to clean you part-way up, only to have the system re-infect itself. If you do not understand any step(s) provided, please do not hesitate to ask before continuing. I would much rather clarify instructions or explain them differently than have something important broken.Finally, please reply using the button in the lower left hand corner of your screen.See you soon,Billy3

2 more replies
Relevance 45.92%

Hello,

I have recently just successfully cloned my Old primary 1TB Western Digital HDD onto my new 1TB Samsung EVO SSD to increase hard drive performance to give it a quick boot up and to enable Windows and my programs to load a lot quicker and perform better with multi tasking. My laptop is one of the bigger 17inch Acer models which comes with two hard drive bays. So once I had wiped my older WD HDD I then inserted a new 2 TB Seagate hard drive into the second bay to be able to store it for personal and media files, and any other imprtant data, to keep it the SSD as the primary hard drive and just for OS and programs only. My system runs the Windows 8.1 OS and is 64 bit.

However, I wanted to create a restore point and upon doing so, I found that System protection was turned off for all my both my hard drives.

I thought I had managed to somehow enable system protection on my C:/ Dive (including the partioned / drive on the same hard drive) on my SSD, and yet though it shows them enabled, it shows the word missing next to them, and I am assuming this is telling me the previous restores are missing; whether as a result of cloning I don't know. The other weird thing is further up the properties page it also shows the C\ and D:\ Drive but turned off.

So I thought I would try increasing the disk space usage, since it was showing it at 0, and it would allow me to do so and returned the message: 'There was an unexpected error in the property page: The system ca... Read more

More replies
Relevance 45.92%

Hello,

I have recently just successfully cloned my Old primary 1TB Western Digital HDD onto my new 1TB Samsung EVO SSD to increase hard drive performance to give it a quick boot up and to enable Windows and my programs to load a lot quicker and perform better with multi tasking. My laptop is one of the bigger 17inch Acer models which comes with two hard drive bays. So once I had wiped my older WD HDD I then inserted a new 2 TB Seagate hard drive into the second bay to be able to store it for personal and media files, and any other imprtant data, to keep it the SSD as the primary hard drive and just for OS and programs only. My system runs the Windows 8.1 OS and is 64 bit.

However, I wanted to create a restore point and upon doing so, I found that System protection was turned off for all my both my hard drives.

I thought I had managed to somehow enable system protection on my C:/ Dive (including the partioned / drive on the same hard drive) on my SSD, and yet though it shows them enabled, it shows the word missing next to them, and I am assuming this is telling me the previous restores are missing; whether as a result of cloning I don't know. The other weird thing is further up the properties page it also shows the C\ and D:\ Drive but turned off.

So I thought I would try increasing the disk space usage, since it was showing it at 0, and it would allow me to do so and returned the message: 'There was an unexpected error in the property page: The system cannot fin... Read more

More replies
Relevance 45.92%

Hello,
 
I have recently successfully cloned my Old primary 1TB Western Digital HDD onto my new 1TB Samsung EVO SSD to increase hard drive performance to give it a quick boot up and to enable Windows and my programs to load a lot quicker and perform better with multi tasking. My laptop is one of the bigger 17inch Acer models which comes with two hard drive bays. So once I had wiped my older WD HDD I then inserted a new 2 TB Seagate hard drive into the second bay to be able to store it for personal and media files, and any other imprtant data, to keep it the SSD as the primary hard drive and just for OS and programs only. My system runs the Windows 8.1 OS and is 64 bit.
 
However, I wanted to create a restore point and upon doing so, I found that System protection was turned off for all my both my hard drives.
 
I thought I had managed to somehow enable system protection on my C:/ Dive (including the partioned :D/ drive on the same hard drive) on my SSD, and yet though it shows them enabled, it shows the word missing next to them, and I am assuming this is telling me the previous restores are missing; whether as a result of cloning I don't know. The other weird thing is further up the properties page it also shows the C\ and D:\ Drive but turned off.
 
So I thought I would try increasing the disk space usage, since it was showing it at 0, and it would allow me to do so and returned the message: 'There was an unexpected error in the property page: The system... Read more

More replies