Computer Support Forum

Device Driver failed to start

Question: Device Driver failed to start

I have tried to fix this issue. I have Mobile Intel 965 Express Chip Set Family showing the Yield sign. I keep getting the Device Driver Failed to start and the picture is distorted and make the computer very slow. Is there a fix?

Thanks

More replies
Relevance 100%
Preferred Solution: Device Driver failed to start

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 74.21%

Hi There,
I'm getting the errors below and but I have not got any BSOD.
The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
This is what the logs files says about each error.
Pku2ulog:
Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
p2plog:
Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
negolog:
Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
idlistenlog:
Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
homegrouplog:
Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
However, the 'Unknown(xx)' number changes times to times.
Could you help me please?

Thank you very much for your attention.
Best Regards.

Answer:Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

Hi,
If you have Home group set up, please go to Control Panel ? Network and Sharing Center. Choose homegroup and sharing options and click ?Leave the homegroup?.Juke Chou
TechNet Community Support

4 more replies
Relevance 64.37%

Hello:
 
Windows 7 has been failing to boot and when I ran a startup repair, I got the following:
 
Problem signature:
  Problem Event Name: StartupRepairOffline
  Problem Signature 01: 6.1.7600.16385
  Problem Signature 02: 6.1.7600.16385
  Problem Signature 03: unknown
  Problem Signature 04: 21199678
  Problem Signature 05: AutoFailover
  Problem Signature 06: 11
  Problem Signature 07: BadDriver
  OS Version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
 
No new devices have been added to this computer recently. Problem first started with extremely long boot time into Windows 7.
 
FRST Report shows:
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:14-12-2015
Ran by SYSTEM on MININT-DP87NLO (14-12-2015 14:40:50)
Running from g:\
Platform: Windows 7 Professional Service Pack 1 (X64) Language: English (United States)
Internet Explorer Version 10
Boot Mode: Recovery
Default: ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.
 
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Registry (Whitelisted) ===========================
 
(If an entry is included in the fixlist, the registry item will be restored to default or removed. The file will not be moved.)
 
HKLM\...\Run: [RTHDVCPL] => C:\P... Read more

More replies
Relevance 63.96%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 63.96%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 63.96%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 63.96%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 63.96%

trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?

Answer:R61e "driver instalation failed could not find the MEDIA device for this driver"

nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions.  Hope this helps

2 more replies
Relevance 63.96%

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

Answer:Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Relevance 63.96%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 63.96%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 63.96%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 63.96%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 63.96%

Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP 

More replies
Relevance 63.96%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 63.14%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 63.14%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 63.14%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 63.14%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 63.14%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.14%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.14%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 63.14%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 63.14%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 61.5%

I just bought the Nikon Coolpix L22 digital camera. I installed their software and when I connect the camera via USB port I receive error "MTP USB Device failed Nikon DSC Coolpix l22-PTP.
I am running Windows 7, 64 bit, 8GB RAM, AMD Athlon Dual-Core processor 7550, 2.50 GHz

Answer:Device Driver failed

Hi,Try the Troubleshoot compatibility, and see does it works with XP Because some programs(drivers) doesn't work with windows 7 and worked with windows xp...You have the user manual for that model hereHope this help Max

4 more replies
Relevance 60.68%

I checked through the Event log in Administrator tools.
I got the following error: The following boot-start or system-start driver(s) failed to load: BANTExt

What is it?

I googled BANTExt and found out it's BelArc Advisor. Is it true?

How do I stop this error?

Answer:The following boot-start or system-start driver(s) failed to load: BANTExt

Yes, BANText.sys is the Belarc Advisor system driver file.It is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry everytime Windows starts.To prevent the error you would need to find and remove that entry in the registry.

11 more replies
Relevance 60.68%

Guys, I'm running Windows XP and recently when I turn on my PC it makes a single beeb and then seems to run OK.

Tonight, I was running Firefox and the system seemed to slow, before becoming completely unresponsive. I had Task Manager open at the time, however when I tried to shut Firefox down the PC started bleeping like mad and I was forced to do a hard shut down.

I waited about 1 minute and then rebooted and immedietly went into the Error log and found the following entry:

"The following boot-start or system-start driver(s) failed to load: StarOpen"

I tried Googling a fix with no luck and I can't find StarOpen in the Services, Apps or Program files. Nor could I find it listed in the Device Manager or the Boot-start list in msconfig.

Can anyone tell me how to fix this?
 

More replies
Relevance 60.68%

Hiall,
I have a problem with Vista Business.Naimly, every time I start the computer and look up into the computer menadgement/event viewer/administrative events it has an error msg:
The following boot-start or system-start driver(s) failed to load: i8042prt



-
System










-
Provider







[ Name]
Service Control Manager






[ Guid]
{555908D1-A6D7-4695-8E1E-26931D2012F4}






[ EventSourceName]
Service Control Manager









-
EventID
7026







[ Qualifiers]
49152










Version
0










Level
2










Task
0










Opcode
0










Keywords
0x80000000000000









-
TimeCreated







[ SystemTime]
2007-08-27T15:56:02.000Z










EventRecordID
26753










Correlation









-
Execution







[ ProcessID]
0






[ ThreadID]
0





















-
EventData






param1
i8042prt
I think this is regarding my video card (Gygabyte Nvidia 8600GTS) drivers?!But the card works pretty normally and the drivers are up to date.
Anyway there are also a lot of other error & warninig msgs regarding the volsnap and security update installation files.Maybe this due to the situation that I have installed both Vista and XP and there is a common problem with Vista working with XP/other and that is NO RESTORE POINTS... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Problem Solution The following boot-start or system-start driver(s) failed to load: i8042prt 1.Go to Start > Run and put regedit.exe  and click  Ok 2.Navigator to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters in Registry Editor 3.Add a new REG_DWORD "Headless " and set the value to 1 4.Reboot the server. Regards,

18 more replies
Relevance 60.68%

Everytime I start Windows, I see the following error in Event Viewer:
 
The following boot-start or system-start driver(s) failed to load: 
VBoxNetAdp

Answer:The following boot-start or system-start driver(s) failed to load: VBoxNetAdp

Do you have Virtual Box or Avast antivirus installed?

1 more replies
Relevance 60.68%

I have system error: The following boot-start or system-start driver(s) failed to load: tvtumon My computer has all pathes and latest rivers installed. Why this driver die?

More replies
Relevance 60.68%

Ok I will copy and paste the message:

The following boot-start or system-start driver(s) failed to load:
aswSP
spldr
Wanarpv6

I found it in vista event viewer. I am currently running vista in safe mode and dont really want to restart the pc. This is my first post on these forums and they look great. SO please help!

MY PC Specs:
2 (1x1) gb RAM
1.6Ghz CEL E1200 Dual Core CPU
Vista Ultimate
CD Driver
256MB GFX Card
Nothing else you really need to know

Answer:VIsta The following boot-start or system-start driver(s) failed to load:

Could be spyware.

I would run a Trendmicro free scan.

3 more replies
Relevance 60.68%

Sorry if this has already been answered/wrong place. I looked at Google but thought I double check here (since the solutions via Google seem to be refering to a different OS to mine)

First of: Windows Vista, SP2, 64 bit.

Now sometimes (and not now since I am writing this) my Keyboard/Mouse just stops working. It freezes completely and I am unable to use it and am hence required to restart the computer. This happens at random occasions but it usually involves opening some program or what not (I noticed a prominent pattern that the mouse/keyboard freezes whenever I go to speedtest.com measure my speed and then once the download speed bar is finished and upload is about to begin my computer freezes).

I had a look at my event viewer and noticed this:

The following boot-start or system-start driver(s) failed to load:
i8042prt

Now I am not sure whether this appears at the start and then once I run a program or do something (like go on speedtest.com) the commuter then freezes (i.e. my mouse/keyboard is non-responsive) or the error message comes up after my computer freezes but any help in fixing this mouse/keyboard freezing would be very grateful.

The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg informa... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Originally Posted by Petze


The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg information, is it possible that I wont ever get access to my keyboard/mouse? My worry is that I might change some value so that I will have no way of getting to the computer with the keyboard/mouse (I am not good with bios) and would not be able to get help on the internet since I can't connect!



It is bad idea

DWORD Start may have following values

0 -boot ,1 -system ,2- auto ,3 -demand, 4 -disabled. Surly if you'll set to 4 you lose access to keyboard and mouse.Don't modify anything.Find folder C:\Windows\Minidump pack it and attache to post.If Minidump folder is empty use verifier tool to diagnose wrong drivers read here:http://www.vistax64.com/973966-post8.html

33 more replies
Relevance 60.68%

Each time I boot my computer, I receive the follow message in the Event Viewer System Log File:

The following boot-start or system-start driver(s) failed to load:
KmxAMRT

Here is the information that I see when I sent it to the Microsoft Support and Help Center

Product:Windows Operating SystemID:7026Source:Service Control ManagerVersion:5.2Symbolic Name:EVENT_BOOT_SYSTEM_DRIVERS_FAILEDMessage:The following boot-start or system-start driver(s) failed to load: %1

What I believe is happening is that all though I uninsulated CA's Anti virus package and installed Microsoft's Security Essentials, not all the CA software was removed.

Help in getting rid of this problem would be greatly appreciated.

Best regards,

Larry

Answer:[SOLVED] The following boot-start or system-start driver(s) failed to load:

Hi

See this document:
Uninstall failed

Select the correct CA product you had, download the Removal script and run.
Hopefully this will remove the CA Suite from your PC.

2 more replies
Relevance 60.68%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies
Relevance 60.68%

Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio

Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.
On occasions the only response is the pop up message driver device failed to install.
The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.
Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same re... Read more

Answer:W7 + device driver failed to install

16 more replies
Relevance 60.68%

Hi, Ive been having a really hard time installing a wireless card on a d220m hp microtower, and Im not sure if its hardware or software related.

My linksys USB wireless card works fine on all other computers using the supplied drivers, however on this computer it has never worked. Other USB devices seem to work just fine, but for some reason the wireless card is giving me a hard time.

Ive had XP home and Pro installed, fully updated, and the same problem occurred on both.

I have updated the bios and looked for the most updated drivers, but the device still wont start. Like I said, other USB devices function normally.

Is there any way to know if there is just a hardware incompatibility, or if theres something else thats keeping this from working?
At one point, the card did work for a brief second and detected networks, but only for a second. I am certain the device is 100% functional.

This code 10 is starting to become a nightmare. Any help appreciated.

Answer:Code 10 (device failed to start)

just an update. the device seems to briefly appear and function when plugged into a new port after restarting, but then the system crashes when i try to use it.
I am completely lost. I know the device works and I know the ports work. What could be the problem?

2 more replies
Relevance 60.68%

Ok, I've looked everywhere and tried tons of solutions to fix this problem. I've uninstalled the drivers for the USB HDD too many times to count and re-installed them, I've uninstalled all the USB drivers and restarted the comp, and more! Here's the problem:

I have a removable HDD for an Omnifi DMP1 car stereo. The HDD has a USB plug and a power plug, which I use both (duh). I plug in my HDD to my computer (Windows XP SP2 Media Edition) and the New Hardware Wizard runs in the bottom corner. Then it says there was a problem installing the hardware, and then the drive can't be found. So I try the same thing on my laptop (XP SP2 Professional) and it runs New Hardware Wizard in te bottom corner. However, it says the installation was successful, and it can see my drive!

What the heck, I'm totally stumped on this? If you could help at all, that would be great! I am leaving on a trip tomorrow, so I won't be able to do anything until I come home on Sunday.

Answer:Error 10 (Failed to start device) for USB HDD?

Hi RDKamikaze and welcome to TSF

Let's talk only about the computer on which the external USB drive doesn't work.

What are the system specs of that computer (see the link in my sig about posting system specs). Don't forget the informations about your Power Supply Unit (open your case and read what's written on the sticker that's on the side of the PSU block). If it's a computer you bought as a whole package from some known brand then brand and model will do but the infos on the PSU will still help.

Are you 100% sure the USB ports on that computer are USB2.0 ports ?

7 more replies
Relevance 60.68%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

More replies
Relevance 60.68%

hi,

I am currently making a device specific module for microsoft MPIO. I have successfully installed the mpio and my own DSM. However, during start-up, an error message comes out saying: "At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details."

When I checked the event log, it says:

The following boot-start or system-start driver failed to load: TrailNavi

TrailNavi is the name of the device specific module that i am making. I am currently using a 32bit server with Windows 2003 OS.

I am trying to test my DSM, but could not do so because the driver can't be loaded..

Any help would be great..
 

Answer:The following boot-start or system-start driver(s) failed to load

bump
 

1 more replies
Relevance 60.68%

I am trying to resolve two problems one is on in my event viewer only; and first started on the 26/11/09 it is as follows:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 06/12/2009
Time: 09:04:34
User: N/A
Computer: USER-B3A7BA2F25
Description:
The following boot-start or system-start driver(s) failed to load:
ViaIde

At that time I had installed some Windows updates, problems often seem to start after Windows updates!.

The second problem also appears in the even viewer, but I am aware it has happened during start up. The system can not find or load the user profile,
This happens at random and can be several days or weeks apart
event viewer details are:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1511
Date: 03/12/2009
Time: 20:19:22
User: USER-B3A7BA2F25\Tony
Computer: USER-B3A7BA2F25
Description:
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.

With the first problem ViaIde failed to load; I have followed Microsoft link, Googled it, and not really seen much information that will help. I have run the scf/scannow without success. Any ideas and help would be appreciated

The second problem of profile loading, I had associated with the Kaspersky internet security suite. They asked me to remove some conflicting software and the problem did stop, but returned a few... Read more

Answer:boot-start or system-start driver(s) failed to load:

Hi, It's all a little disappointing, it would seem no one here has an answer either.

The user profile problem does for the time being seems to have stopped, since the last Windows update, but I am not holding my breath as this happend before and then it retunes again.

I am left with just the "The following boot-start or system-start driver(s) failed to load: ViaIde, problem to resolve........if anyone does have a clue ?

regards Tmax
 

8 more replies
Relevance 60.68%

Of late when I am powering on my PC, the power LED on the cabinet blinks but the HDD LED doesn't. The monitor displays, NO SIGNAL.
Then when I restart the PC and when it finally boots, I go to the Event Viewer and find this entry

The following boot-start or system-start driver(s) failed to load: atc

My PC Config:
ASUS M5A78L-M/USB3 MoBo
AMD FX 6100 CPU
Corsair Vengeance 8 Gigs RAM
Crucial MX 100 256 GB SSD
500+160 Seagate HDDs
ATI Radeon HD5450 GPU

Kindly advise what does the above error mean and how do I resolve it

Thanks

More replies
Relevance 60.27%

I recently had to install a new battery for my computer. After doing so I started having this problem and receiving the following Error from the "Service Control Manager" Event ID:7026   The following Boot-Start or System-Start driver(s)
failed to load: ppfd_vt_1_10_0_24    Param 1. The issues I am having are; Unable to completely "SHUT DOWN" unless I press the power button, this is after I have already selected the "shut down" option in the Start menu. Never
had to press the power button to power off my computer. Also, at "START-UP", I get as far as a black screen with a white flashing cursor in upper left-hand corner. At this point I am stuck, nothing takes me out of this state unless I press the "POWER"
button to shut-down. In order to start-up & Boot, I disconnect AC Adapter, remove battery, wait about 20 seconds, re-install battery, power adapter, and push power button. Now my computer is all good. Can anyone help me with this, I've researched for 2
weeks and am no where. Thanks for any help. My computer is quite old, 2010 Sept., but I'm hoping that I don't have to purchase a new one...(I'm a lil cheap) lol

More replies
Relevance 60.27%

OS: Windows Vista Buisness Edition
Device: Zen Vision M

Hi guys, I've had this Zen for almost a year now, it docks jst fine with my win 2000 rig, however it fails to work with my vista laptop.

I plug in the Zen, the "installing device driver" icon comes up in the sys tray, after a few moments it says "driver install failed."

It recognizes it as a MTP device when it is loading.

The zen screen shows it as "docked."

Help!!
Gimpster
 

More replies
Relevance 60.27%

Periodically, I get a message which states:C:\Progra~1\Symantec\S32EVNT1.DLLAn installable Virtual Device Driver failed Dll initialisation. Choose close to terminate the application.I think this happens when my screen saver starts.i have recently uninstalled Norton antivirus as I was getting problems with my PC looping on shut down, I believe this was due to "common client" updates not installing.Any ideas please?

More replies
Relevance 60.27%

Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???

Answer:Windows says device driver installation failed

You have to reinstall your printer drivers or you're probably going to continue to get the error. If you are unsure how to go about updating your device drivers for the printer, I would suggest you start here:

What are device drivers? A quick device driver installation guide.

good luck.

2 more replies
Relevance 59.86%

Hi guys,
I am trying to get my microhpone to work, and it doesnt anymore, it's definately not the mic as i have tested it on another comp, but it won't work on this one.

I'm running a Soundblaster Live! 24-bit sound card on windows XP SP2 , and the Creative Game Port has a Yellow- (!) next to it with an error code 10.

Anyone know how to fix it? Or why it does this....

I tried re-installing drivers, changing the sound card to a different PCI slot, and disable the on-board audio, on my Asus A7V600.

Thanks
 

Answer:Error Code 10, Device failed to start...

Here is what I found on the code, but from what I have read, it doesn't sound as if it will help any:

Code 10

If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.
Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.
Click to expand...
 

1 more replies
Relevance 59.86%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 59.45%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 59.45%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 59.45%

"The installation failed because a function driver was not specified for this device instance"
I received this message while installing a USB driver. I have an 80GB External USB 2.0 hard drive attached that was working great a few days ago. I logged on one day to find this device "unrecognized". When I checked the device manager, it said that the driver was missing (?!). I searched for the driver on the MS website, and the device manager seemed to find a suitable one, but upon install I got the message above.

I found the old driver on my system which seemed odd to me, deleted it, tried to reinstall and received the same message.

I understand that USB 2.0 is backwards compatible, plus it was working previously, so it seems strange that it suddenly died.

Any help is greatly appreciated.

BOB
 

More replies
Relevance 58.63%

Hi, guys.

When I want to install certain programs, there is a set of error messages that makes the installation fail. They're as follows:

"c:\PROGRA~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver failed Dll initialization. Choose 'Close' to terminate the application."

If I push "ignore" then this message appears:

"c:\Windows\system32\autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application."

I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this?

I've been having this problem for the longest times and threw away a bunch of software because I simply couldn't install them. It's soooo frustrating. Please help!
 

Answer:Error Message: virtual device driver failed Dll initialization

It's a fairly common problem with an easy fix.

Download and run the file in this post from Elvandil:

http://forums.techguy.org/2178768-post2.html

It will fix the second error -- I'm not sure about the first.
 

3 more replies
Relevance 58.22%

I am using a Satellite L300 series laptop with a TSSTcorp CDDCDW TS-L633A CD/DVD drive, however the drive has presently stopped working, saying that:

"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"

I have tried uninstalling the drive and restarting the computer however when the laptop attempts to reinstall the driver I get an error message saying:

"Device driver software was not successfully installed"

Any ideas for how to get the disk drive up and running again?

Answer:Satellite L300: TSSTcorp CDDCDW TS-L633A Device Driver Failed

Hi

I think this can be solved very easily.
There are some threads which provide an solution;

Usually you need to delete this device in device manager.
Then you have to go to registry and have to remove the upper and lower filters from registry key.
Here you can get more details:
http://support.microsoft.com/kb/270008/en-us

After that reboot the unit.

4 more replies
Relevance 58.22%

I had Norton Internet Security 2006 on my PC, uninstalled it and also ran the Norton Removal Utility (Ver.2008.0.1.19)

When I try to install a program, (Presto PageManager 7.15), at the end of the install I got 2 error messages:
The 1st is "AddPrinter Error: 1796".

The 2nd is related to Symantec: (16 bit Windows Subsystem)

?C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL initialization. Choose 'Close' to terminate the application.?

I?ve researched the problem extensively. It relates to registry key Virtual Device Driver VDD. I tried to delete the key, delete the data value, etc. Nothing helps. When I remove Page Manager & try to reinstall I still get Error messages telling me the Virtual Device Driver is not setup properly or it?s data is wrong.

Below is my HJT log file.
Please let me know what I need to do.
 

Answer:C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL in

Re: C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DL

Try running SymNRT, the Norton Removal Tool from Symantec. It works better than any of the 3rd party Norton removers. It may be too late, but it might still be able to clean up any remnants. Get it here: http://www.majorgeeks.com/Norton_Removal_Tool_SymNRT_d4749.html You should probably also run a registry cleaner. CCleaner has proven itself both safe and effective; run both the disk cleaner and the registry cleaner using default settings and be sure to save the reg when prompted by CCleaner (just in case ). You'll be required to reboot after SymNRT (if it runs), and you should probably reboot after CCleaner. Then retry your installation. Download CCleaner from here: http://www.majorgeeks.com/CCleaner_Slim_No_Toolbar_d4191.html

....and Welcome to Major Geeks! :major
 

2 more replies
Relevance 58.22%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 58.22%

Hi everyone,

It's just a normal Toshiba NB550D netbook

The only thing that I change is the Wireless Card inside it: the original is a common Atheros half mini card. Recently I have the urge to use internet in 5 ghz (frequency).

Thus, I decide to replace the old one with the *half mini card Intel Wifi Link 5100 AGN*
It doesn't turn out so well. The driver is not recognised or more precisely the windows tries to install the driver but FAIL is reported. Device manager tool shows an "!" next to the network card and when I go the its properties at general tab: "*The device failed to start - Code 10*"

I tried many ways to uninstall the driver and reinstall again ; also tried to download drivers from toshiba website for intel network card.

Nothing works so far and yeah I just don't know what to do now.

The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm.

Please help me solve this problem. I really need to use dual band (2.4 and 5 ghz) internet.
Appreciate any help!!

Answer:Device failed to start - Code 10 - Intel Wireless Card on NB550D

>The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm


Regarding the error code 10:
http://support.microsoft.com/kb/943104/en-us

+The Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues between hardware drivers and additional software that is installed in Windows.+

I don?t think its Wlan card issue? it could be a compatibility problem between the BIOS and the WLan card.
Not all devices are supported by BIOS?.


But at the other hand the WLan card appears already in device manager and therefore I think there should not be a BIOS compatibility issue.

Did you check if chipset would handle the Wlan card properly?

9 more replies
Relevance 58.22%

OK Now this is getting very annoying. Apparently this problem has been going on for a long time (Since 05/23/05) but so infrequently that I haven't realized it. And no, I don't remember what I might have down then to start this problem.

Now I'm getting the BSOD at least once a day. The last time I wrote down the text and it listed the following "DRIVER_IRQL_NOT_LESS_OR_EQUAL

When I look into the event view the error lists the source as the Service Control Manager. The detailed description states:

"The USB SECURITY DEVICE service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. "

I have no idea what might have started this but I do know that it suddenly got much worse after I replaced my power supply. (The Fan Died and I shut down gracefully as soon as I got the first wiff or burnt electronics.) All has worked fine since then except for the increased Frequency of this BSOD.

I'll add my full system specs as soon as I get them from the everest pgm I just downloaded.
 

Answer:BSOD-Event Vwr points to SCM & USB SECURITY DEVICE service failed to start

Hi GScooter,

I've investigate your minidumps and it is faulty ram. You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty can pass memtest.

Suggestion
1. Reseat the memory stick to another memory slot
2. Downclock the ram
3. Clean the inside the computer case
4. Make sure that the ram is compatible to the motherboard
If it still crashes, diagnostic which memory stick is faulty
1. Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
2. If you have only one memory stick, replace the ram
 

1 more replies
Relevance 57.81%

Hi everyone :),
i am facing a problem in with my network. every morning i am receiving call from users that LAN is not working. when i check the system; i found that lan driver has yellow mark in device manager. steps i have taken to resove the issue:
1) restart the system after removing the lan cable.
2) connect the lan cable when system started.
problem solved.
but it is happening daily, not with 1 or 2 users but 6-8 users daily.problem is repeating the users.
other steps performed:
1) dns forwarding applied on one of the domain server.
forwarding to ISP dns.
2) give the domain ip in the primary dns of users computers.

but problem is still remaining. not solved yet.
domain user also having this lan problem.



kindly provide me any help.
waiting for any reply.
Thanks
Umesh Malik
[email protected]

Answer:lan driver failed to start

Solution: 1: Create restore point and take registry backup.
2: Delete all unwated software's, and toolbar, security software's. from program and feature.

3: Delete all temp files.
4: Disable all unwanted services from startup and then delete from registry.
5: scan with spyware removal and hijacthis and trojon removal tool.
6: Restart the computer and check windows update. if found and then update.

1 more replies
Relevance 57.81%

Hello everyone. Hope you are all doing good today and able to beat the heat on this very hot day. I have this really old laptop HP Pavillion dv6000. Originally it came with Windows Vista installed back when Windows Vista was first released but eventually I upgraded the laptop to Windows 7. Everything was fine and working until recently where the laptop has no sound. I try to install the sound driver from the HP website and it says "driver installation failed: could not find the device for this driver." No matter what I do I cannot get sound on this laptop. If I go to YouTube and watch a video the video plays just fine but with no sound. When I click on the sound icon next to the time on the desktop bar a window pops up that says "troubleshooting has completed" Problems found: "Hardware changes might not have been detected." I am not sure what is up with this or how to fix it but any help is appreciated thanks.

Answer:It says "driver installation failed could not find the device for this driver"

A Vista laptop likely doesn't have Win7 drivers written...try re-installing the originals from the Driver CD and reboot...Plus it's likely you are trying nVidia or AMD drivers gettin it to work which is a no-no on a laptop....

6 more replies
Relevance 57.4%

Hello i keep getting the same symptoms as everything(black screen followed by the igfx message) and frequent bsod. I have already ran everything in the virus, malware department, cleaned my system and even tried a system restore. I have updated all drivers(I have the intel chipset family graphics driver)

Heres some specs, if you need something else, let me know.

OS Name Microsoft? Windows Vista™ Home Premium
Version 6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TAMMY-PC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv4 Notebook PC
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.42, 5/14/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005"
User Name Tammy-PC\Tammy
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.90 GB
Available Physical Memory 2.13 GB
Total Virtual Memory 7.98 GB
Available Virtual Memory 5.96 GB
Page File Space 4.20 GB
Page File C:\pagefile.sys

The last time i got the blue screen of death and rebooted, it showed me this error message from windows.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 103... Read more

Answer:Device driver igfx has failed or recovered.(And i dont play online games)

Hello and welcome to the forum and I am sorry you are having system problems, start with this and someone who is an expert in BSOD will get back to you.


BSOD - Debugging a BSOD in Vista

BSOD with netio.sys or ndis.sys - Fix

1 more replies
Relevance 57.4%

Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it, but it hadn't been booted for over a week before the event. Any suggestions?

Answer:Error at boot : 0xc000000e - The system has failed to start because a required device is inaccessible.

HiThe /ScanOs switch shows the operating systems installed that aren't already in the BCD so it can show 0 and you are still okay.Assuming C: is the drive that Win7 is installed on, in the Startup Repair command line can you typeC:press ENTERdirpress ENTERdo you see more than one WINDOWS directory?If C: gives you a "File not found" error, try D: (C: can sometimes be assigned to the otherwise hidden System Reserve volume)Also does it say anything more on the screen than...Error at boot : 0xc000000e - The system has failed to start because a required device is inaccessible.What I mean is, is it a Blue Screen or a Black screen telling you to ...1. Insert your windows installation disc and restart your computer. 2. Choose your language settings, and then click next 3. Click "repair your computer.James

48 more replies
Relevance 57.4%

Have a Windows 7 Pro box.
Get the following Admin Events Error message with an Event ID of 7000
Looking at the Admin Events after bootup get the following message:

The Cisco Systems Inc. IPSec Driver service failed to start due to the following error:
The system cannot find the file specified.

How to I fix/get rid of this event?

Thanks - Tom

Answer:IPSec driver failed to start

Uninstall Kaspersky (just as a test).
Install MSE
(Download Microsoft Security Essentials Prerelease from Official Microsoft Download Center)
Re-install the Cisco app. and see if the error goes away.

3 more replies
Relevance 57.4%

I have Windows 10 64bit (build 10586) on my HP Elite X2 1011 G1 with Power Keyboard. Sometimes (more and more) after I close my laptop and open although it has to continue work it seems it resets. After I log in, the screen starts to flicker, the whole screen is filled with one color instead of the windows pictures. It flicker around 3 times, and after some time finally it logs in. It should use my last state but it seems it is resetted. Sometime the DPI is not ok, and it says in the Event Log: "Display driver failed to start; using Microsoft Basic Display Driver instead. Check Windows Update for a newer display driver." - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System>  <Provider Name="Display" />  <EventID Qualifiers="0">4115</EventID>  <Level>3</Level>  <Task>0</Task>  <Keywords>0x80000000000000</Keywords>  <TimeCreated SystemTime="2016-05-11T17:17:55.824099200Z" />  <EventRecordID>18363</EventRecordID>  <Channel>System</Channel>  <Computer>xxxxxxxxxxx.local</Computer>  <Security />  </System>- <EventData>  <Data />  <Data />  </EventData>  </Event> I use the latest driver from HP (4300, 2016 January), although Intel has newer version it says I should use the drivers from my manufacturer...

More replies
Relevance 57.4%

Have a Windows 7 Pro box.
Get the following Admin Events Error message with an Event ID of 7000
Looking at the Admin Events after bootup get the following message:

The Cisco Systems Inc. IPSec Driver service failed to start due to the following error:
The system cannot find the file specified.

How to I fix/get rid of this event?

Thanks - Tom
 

Answer:IPSec driver failed to start

Re-install the Cisco product.
 

1 more replies
Relevance 57.4%

IPSec driver failed to start
Have a Windows 7 Pro box.
Get the following Admin Events Error message with an Event ID of 7000
Looking at the Admin Events after bootup get the following message:

The Cisco Systems Inc. IPSec Driver service failed to start due to the following error:
The system cannot find the file specified.

How to I fix/get rid of this event?

Thanks - Tom

Answer:IPSec Driver failed to start

update the driver

1 more replies
Relevance 57.4%

I have Windows 10 64bit (build 10586) on my HP Elite X2 1011 G1 with Power Keyboard. Sometimes (more and more) after I close my laptop and open although it has to continue work it seems it resets. After I log in, the screen starts to flicker, the whole screen is filled with one color instead of the windows pictures. It flicker around 3 times, and after some time finally it logs in. It should use my last state but it seems it is resetted. Sometime the DPI is not ok, and it says in the Event Log: "Display driver failed to start; using Microsoft Basic Display Driver instead. Check Windows Update for a newer display driver." - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System>  <Provider Name="Display" />  <EventID Qualifiers="0">4115</EventID>  <Level>3</Level>  <Task>0</Task>  <Keywords>0x80000000000000</Keywords>  <TimeCreated SystemTime="2016-05-11T17:17:55.824099200Z" />  <EventRecordID>18363</EventRecordID>  <Channel>System</Channel>  <Computer>xxxxxxxxxxx.local</Computer>  <Security />  </System>- <EventData>  <Data />  <Data />  </EventData>  </Event> I use the latest driver from HP (4300, 2016 January), although Intel has newer version it says I should use the drivers from my manufacturer...

More replies
Relevance 56.99%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 56.58%

Hey guys,

I built a new computer for my parents (AMD machine vs the old intel) and put the hard-drive in it.

However, Windows won't start, and it can't run repair, bad driver,

I can't run it in safe mode and system restore did nothing.

Thoughts?

Answer:Windows Failed To Start - SystemRepairOffline Bad Driver

A clean install maybe? Do you know what driver? Maybe you could download it with another computer and then install it in the affected machine.

2 more replies
Relevance 56.58%

For some reason my webcam won?t start. Its saying driver has failed to open.
Could you please help me find the right drivers please?

Answer:Re: Webcam wont start - driver has failed to open

Please let us know which notebook model do you have exactly.
Anyway, there are no 10 different drivers and now you must choose the right one.
The right driver for your notebook model you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download.

Just choose the right model.

3 more replies
Relevance 56.17%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 56.17%

Dell Optiplex 5040Intel HD Graphics 530Driver date: 8/13/2017Driver version: 22.20.16.4771Display driver failed to start;using Microsoft Basic Display Driver instead.Check Windows Update for a newer display driver.Was working before Windows 10 Fall 2017 Creators Update.Dell Update 1.9.60.0 finds no updates.Intel® Driver & Support Assistant finds no updates.Microsoft Update - Update Status: Your device is up to date.Who will fix this? Microsoft?? Intel?? Dell??

Answer:Intel HD Graphics 530 Display driver failed to start

Code 43 is usually a driver issue.
I had that driver, and the Win 10 Fall update and was working OK, but just recently (Wednesday) ran the Intel updater and got a later driver version.  22.20.16.4815
uninstall the current Intel driver, restart the PC and when Windows starts it "should" detect and install the driver.  If that doesn't work reinstall the Intel Motherboard Chipset Drivers (Intel Chipset Device Software as listed on Dell downloads) and then run the Intel updater again.
Here is the link to the Dell downloads and Intel chipset drivers.
www.dell.com/.../drivers

2 more replies
Relevance 56.17%

Searching the site found no results for me with reference to my titled issue. Several years old desktop with an intel DG33FB mobo, Dual Core 2.53 P4 Wolfdale CPU, 8192MB DDR2 RAM and XP SP3 OS. Wireless connect via Linkys WUSB600N to Linksys router. Local area connection disabled. No internal dust buildup. File System kept "clean" with CCleaner, McAfee AV, Max Registry Cleaner, Max Spyware Detector, Adaware, and Malware bytes, on a regular basis. Hard drive not in need of defragmenting. Computer resides in an air conditioned environment away from any high energy equipment. 3 recent issues that have been occurring for the past 3 months that are not absolutely critical, but extremely annoying. 1. Boot up is slow. Seems to pause several times for up to 2 minutes before completing the boot. Then runs normally. 2. When a CD/BD drive is opened, internet connectivity is lost for a few seconds until reacquired after notifications. 3. When running a processor intensive program, unattended, for several hours, I find that the computer has rebooted itself prior to my return. I have checked for loose connections, reset the RAM modules, ran memory and hard drive tests, all OK. Heat sinks in place and all fans operational. CPU cooling fan is set for "agressive" in BIOS. Looking at the event log I find a suspicious series of errors occurring more often than I think it should. I can think of no way better than to attach a series of jpegs to depict this series of errors for... Read more

Answer:Solved: Max Network Packet Driver Failed to Start

Took a lot of effort on my own, but able to copy a file in the Windows program files, Maxnpf.sys, to the Windows/system32 file. Seems to be working.
 

1 more replies
Relevance 56.17%

Hi, my pc was having some bsods lately but rebooted ok. Last night it failed to boot and havent booted normally since then. It only boots in safe mode. I have tried every option in the F8 menu, ran chkdsk and nothing worked. the exact error from startup repair says :
 
problem event name startuprepairoffline
problem signature 01: 6.1.7600.16385
problem signature 02: 6.1.7600.16385
problem signature 03: unknown
problem signature 04: 0
problem signature 05: autofailover
problem signature 06: 1
problem signature 07: baddriver
 
for what is worth i though it to be a different problem so i did a clean install of win 7 and still the same. i have read some older threads and all suggested farbar. this is the log:
 
===============================================================================================
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 08-09-2013
Ran by SYSTEM on MININT-5PC7S3T on 08-09-2013 04:40:21
Running from D:\
Windows 7 Ultimate (X64) OS Language: English(US)
Internet Explorer Version 8
Boot Mode: Recovery
 
The current controlset is ControlSet001
ATTENTION!:=====> If the system is bootable FRST could be run from normal or Safe mode to create a complete log.
 
==================== Registry (Whitelisted) ==================
 
HKLM\...\RunOnce: [NoIE4StubProcessing] - C:\Windows\system32\reg.exe DELETE "HKLM\SOFTWARE\Microsoft\Active Setup\Installed Components" /v "NoIE4StubProcessing" /f [74752 2009-07-13] ... Read more

Answer:Windows 7 failed to start Startuprepair Offline Bad Driver

log properly posted here.http://www.bleepingcomputer.com/forums/t/507105/windows-7-failed-to-start-startuprepair-offline-bad-driver/Now that your log is properly posted, you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a Malware Removal Team member, nor should you continue to ask for help elsewhere. Doing so can result in system changes which may not show it the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.From this point on the Malware Removal Team should be the only members that you take advice from, until they have verified your log as clean.Please be patient. It may take a while to get a response because the Malware Removal Team members are very busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the Malware Removal Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MRL Team member is already as... Read more

1 more replies
Relevance 55.76%

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

More replies
Relevance 55.76%

hi folksgot a problem that has me stumped last few daysgot an onboard AC97 sound, drivers are installed but no sound.went into the driver properties and it says "device or driver(can't remeber which one is it) enabled but not started", therefore everything in sound devices is grayed out.btw my Plug annd Play Enumerator is enabled.any suggestions?Soltek SL-865Pro2-FGR mobo MSI NX6600GT-VTD128 video card Kingston Value RAM - KVR400X64C3AK2/1G : 1GB PC3200 CL3 INTEL P4 3.2GHZ Seagate 200GB SATA hard drive 500W power supply. Windows XP Sp2

Answer:How do you start a driver/device?

Uninstall and re-install the drivers and follow the onscreen prompts to make sure it is loaded on startup...

8 more replies
Relevance 55.35%

Hi,

My windows failed to load b/c a critical system driver is missing or corrupt.

File: windows/system32/Drivers/gjofl.sys

Status: 0xc0000225

Prior to this, I had received some sort of virus that microsoft security essentials claimed to quarantine. I also ran malware bytes. After the scans, my computer accidentally became unplugged and died (the battery is shot). After trying to restart, I received the error msg.

I have tried booting up in safe mode and it doesn't work.

I also ran diagnostics -- the only msg I received was: "diagnostics not found on utility partition". I have no idea what that means.

I am being prompted to insert my installation disc to repair my comp, but windows was preinstalled so I don't have that option.

Please help!

Answer:Windows failed to start b/c critical driver is missin or corrupt

I dont know the answer, but I have a suspicion, that maybe, that driver has something to do with the virus. I googled the driver, nothing. I looked at my computers drivers (cmd prompt and type driverquery) and I do not have it.

5 more replies
Relevance 54.94%

I'm in the process of building a HTPC and am having problems with the ethernet drivers. The drivers weren't automatically installed after a fresh Win7 installation, so I tried installing them off the motherboard drivers disk (EVGA H55V). After driver installation, I get the error message in the device manager as stated in the title, "This device cannot start".

After some googling, seems that it means either the device is plugged in improperly or the driver is bad. Well, it's on the motherboard, and everything else works, so can't be that. I found newer drivers, tried installing them, and still the same error.

The device is the Intel 82578DC. Anyone have any ideas?

Answer:This device cannot start (Ethernet driver)

There are some generic drivers here you could try :
http://downloadcenter.intel.com/Sear...t+Ethernet+PHY

FQA's
Intel? 82578 Gigabit Ethernet PHY &mdash; FAQ for Intel? 82578DM and 82578DC Gigabit Network Connections

9 more replies
Relevance 54.94%

Ok now, I've been searching all over the Internet and I've found many solutions to this problem which do help some and not others, and they're all different. Out from the answers, came up that one :
http://www.bleepingcomputer.com/forums/t/448339/windows-failed-to-start-system-repair-cant-discover-problem/
but the solution, related to Malware troubleshooting is not an obvious symptom in my case.
The Windows Repair Problem Signature
Problem Event Name: Startup Repair Offline
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3:
Problem Signature 4:
Problem Signature 5: AutoFailover
Problem Signature 6:
Problem Signature 7: BadDriver
 
 
What Happened...
My started to face some BSOD issues in April, I started to believe into issues related to SSD OCZ2, which I replaced by a Samsung 840 Pro. However, while trying all kinds of solutions, I noted that the issue whatever it was was not the disk, so I reuse both SSD as C: and D:, on top of all other partitions
 
In fact I could come back to a Backup via Easus, that backup is like an enriched clean install, which is one year old, but seems to be very fit. It costed me Days to succeed and not lose more.
 
After maximum 2 additional weeks, BSOs came back. There is not any cause mentioned in the BlueScreen.
I jumped again onto the Windows 7 installation Disk (both CD and USB) to run all kinds of tests, with no success.
 
I first managed to still enter the Safe Mode,
- I eli... Read more

Answer:Windows Failed to Start, System Repair Can't Discover Problem, bad driver

ok thanks for the many replies first of all, probably nobody got inspired by so much text I agree.
 
As my Mobo Asus P8P67 has a design error (built 2011), I first decided to send it back to Asus.
First time to disassemble and soon reassemble a PC.
 
If technically all ok, I will proceed with the main issue : pnpclass.sys blocks in safe mode. All other boot modes being out.
 
It seems to leave all doors of errors open, so again if anybody would help out, I wouldn't reject the support.

1 more replies
Relevance 54.94%

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

Answer:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

3 more replies
Relevance 54.94%

Hi everytime im trying to startup a game i get a BSOD....i have an alienware m17xr3
8gb ram, i7 processor, 580m graphics
i attached the dumped files that were created after my last two blue screens
i also did a new install of the latest drivers from nvidia

Answer:BSOD display driver reset failed...Everytime trying to start a game

Hi,

Both attached dumps are of the VIDEO_TDR_FAILURE (116) bugcheck. Before moving on to 116 troubleshooting, remove your Norton Anti Virus and replace it with Microsoft Security Essentials temporarily for troubleshooting purposes:

Norton removal tool~

The basic definition of a 0x116 bugcheck is:
There may be a bug in the video driver or video hardware.So, let me now explain what VIDEO_TDR_ERROR means. First off, TDR is an acronym for Timeout Detection and Recovery. Timeout Detection and Recovery was introduced in Vista and carried over to Windows 7. Rather than putting exactly what Timeout Detection and Recovery does exactly, I'll just directly quote the MSDN article! Timeout detection: The GPU scheduler, which is part of the DirectX graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU is taking more than the permitted amount of time to execute a particular task. The GPU scheduler then tries to preempt this particular task. The preempt operation has a "wait" timeout, which is the actual TDR timeout. This step is thus the timeout detection phase of the process. The default timeout period in Windows Vista and later operating systems is 2 seconds. If the GPU cannot complete or preempt the current task within the TDR timeout period, the operating system diagnoses that the GPU is frozen.
To prevent timeout detection from occurring, hardware vendors should ensure that graphics operations (that is, DMA buffer completion) take no more than 2... Read more

6 more replies
Relevance 54.53%

I had to reinstall Vista on my eMachines w4620 laptop and now I cannot get the sound card to work. I am finding that this is a common issue, however I have yet to find a solution that works. I have included my Everest report hoping someone can help me. Thanks!
 

Answer:AC'97 Driver Issue - This device cannot start. (Code 10)

Can anyone help me?
 

4 more replies
Relevance 54.53%

On my system (specs in profile). I have recently experienced a problem where when I restart my computer, I have two USB devices which have aren't working and say "Device cannot start (Code 10)" both devices are security or access control devices. first is a USB fingerprint reader, and the other is a Yubikey 4. I have never had any issues with using these devices in the past but starting this afternoon, every time I restart my system these issues occur. I am able to resolve the issues by running the Microsoft Hardware Diagnostic (Fixit) tool which advises me to re-install the device drivers which corrects the issues until the next time I restart the system. Which then I have to go through the process all over again. I can include additional information upon request. Also, thanks in advance for any assistance in this matter.

More replies
Relevance 53.71%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 53.71%

I formatted my computer, installed winxp sp2 and the driver for my multimedia device was lost, i ran everest to check what it was and its SiS 7012 audio device, an odd thing was when it said my motherboard name is unknown, its a laptop.
I downloaded different drivers but non of them were succesful, i tried installing one and a failure error pop up, "failed to install driver for windows xp" (check link or thumbnail), i tried installing winme.exe for windows ME driver but it didnt work, tried changing install directories but didnt work either. i donwloaded drivers from SIS home page but didnt work either. please help, i am most concerned about my sound device rather than the mother board, here are my specs.

http://img211.imageshack.us/my.php?image=failed2wm.jpg

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2600 MHz (13 x 200)
Motherboard Name Unknown
Motherboard Chipset SiS 648FX
System Memory 512 MB (PC2700 DDR SDRAM)
BIOS Type AMI (01/12/04)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter ATI Mobility Radeon 9600/9700 (M10/M11)
3D Accelerator ATI Mobility Radeon 9600/9700 (M10/M11)
Multimedia:
Audio Adapter SiS 7012 Audio Device
Storage:
IDE Controller SiS PCI IDE Controller
Disk Drive TOSHIBA MK602... Read more

Answer:SiS 7012 audio device "failed to install driver for Windows XP"

Hello and welcome to Techspot.

Go to your laptop manufacturers website. You should be able to get your drivers there.

Regards Howard :wave: :wave:
 

14 more replies
Relevance 53.71%

I have a Yiynova tablet monitor and its been working fine for about a month. I recently tried to download the beta version of a NVIDIA GeForce update (bad idea) and had to reinstall a previous version. After that, things started to go south for my tablet.

I uninstalled and reinstalled the tablet driver, and tried to plug it in a different USB port and it came up with the same message.

Is there a step that I'm missing?

I have dual screen setup, and that's working fine, but the driver that senses the pen just isn't installing, even though I installed the driver program.

I appreciate any ideas on how to fix this.

Answer:Yiynova tablet monitor "device driver failed to install"

The problem wasn't solved, but I believed I narrowed down the problem. The driver doesn't seem to fully install.

1 more replies
Relevance 53.71%

Greetings all.

I monitor installation of apps with Systrace and Comodo Programs Manager. Using the latter, which includes the ability to uninstall Drivers, I've encountered a disastrous problem:
Specs:
Dell Inspiron 1525 laptop
Intel 2 x 2.0GHz, 8GB DDR2, 320GB 7200 HDD (20+GB free)
Windows 7 Ultimate 64bit, fully patched, updated and maintained
Norton IS 2012, Malwarebytes, Mamutu, Windows Firewall (regularly run Kaspersky, ESET, etc., scanners offline. No malware.)
Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers.

Problem: Using Comodo Programs Manager (CPM) I uninstalled Windows Mobile 2003 Device Driver which required a reboot to complete and, now, I cannot boot the system. The Windows logon screen appears, a message displays, saying CPM's "Force delete jobs completing...". The system freezes there with a black screen, the mouse cursor responds but there is no other activity. Even the LED showing HDD activity ceases.

Attempted solutions:
-- Safe Mode(s), Last Known Good Config, etc., Startup Repair, (System Restore has been disabled.) To make matters worse, I carelessly began to run Windws 7 installation repair as though it was XP. Before I caught the mistake and cancelled, 7 had already begun to copy files. Now I have the SystemRoot as "windows\windows".
-- BCD rebuild successful but still have the "windows\windows".
-- SFC starts but will not complete from Windows RE Comm... Read more

Answer:Failed device-driver uninstall with "forcedelete" loop

"Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers"... You should keep these on a separate hard drive or on an optical disk, but you actually know this already don't you You computer should be set up to easily reloaded as mine is, in case of a "disastrous problem" like you are having now. There's really no excuse
 

9 more replies
Relevance 53.3%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 53.3%

I am unable to install iTunes on Windows 7 on a Dell Optiplex 780. It always errors out as "apple mobile device service failed to start" and then installation always rolls back. One result told me to remove all apple software on my computer, but I do not have any apple software installed, it always fails to install. a few websites mentioned to make sure that my iPod is not plugged into the computer when installing, I unplugged it, it made no difference. and there were websites telling me to just manually start the service, but every time I try I get a "unable to start service. the service did not respond to the start or control request in a timely fashion" which pops up immediately. I also tried doing an SFC /scannow but it says "there are no integrity violations"

I am at a loss here. I even tried various alternatives to iTunes which all give errors of their own

Any ideas?

Answer:"apple mobile device service failed to start"

Hello mate now I don't have a an answer but my partner has a very similar problem on her laptop - an annoying message t say that Apple Push has stopped.

It did get a little better by running these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f and /r in the command line as per Option2 by better I mean it got less frequent.

To be honest I am not an Apple fan and it seems to me it clutters everything up

1 more replies
Relevance 53.3%

I have uninstalled and reinstalled (admin) the latest driver several times. I dont have any USB 3 devices yet and have nothing plugged into a USB 3. I am starting to think my last option is to disable all USB 3 on my computer but when I get a USB 3 I will be screwed. Any Thoughts?

Answer:BSOD from USB 3- Driver wont install correctly/device cannot start

Hi
You have only 2 minidums and they are also bit old.
So,i'll reply according these minidumps.
Update software\driver for NEC Electronics USB 3.0 Host Controller Driver (previous issues w/BSOD's)

http://www.renesas.com/support/index.jsp
Remove symantec\norton from your system (for testing purposes).
Download and install Microsoft Security Essentials with windows firewall enable.

Finish with this steps and post back with results\news.

1 more replies
Relevance 52.07%

In response to the instructional post with subject, "TO: Everyone Seeking Driver Help":

1. MOTHERBOARD MAKE/MODEL: Didn't know what info to include; Ran Everest Home Edition; Attaching Log (didn't know which report to include so attaching both System Summary and Hardware-Related)

PC MAKE/MODEL: Dell Inspiron 5160

2. I thought a video driver update would help improve video play so I downloaded one from dell.com. Upon restart, after installing I got a blue screen with the error message that a device driver is stuck in an infinite loop and the program causing the trouble was "xgiv3". I restarted again to be sure and got the same message. I am now running in safe mode w/networking because it won't open otherwise. I feel like such a dolt. Here are the juicy details in case any of them will help:


I THINK I downloaded/installed the XGI Driver (version 2.116C, A10) from a recommened download list on dell.com. Here's the link to the list that was recommended when I entered my service tag # 1BGWG61:

http://support.dell.com/support/dow...&SystemID=INS_PNT_P4_5160&TabIndex=&typeid=-1

I was just now scrolling through my Add/Remove Programs list to verify that that was indeed the driver I downloaded. I clicked "show updates" because I thought I had been updating a driver and wanted to see the troublesome update in the list. Two items had a bunch of things listed under them as having been installed today (2... Read more

Answer:Start Up Error AFter Download: Device Driver Stuck in Infinite Loop (due to xgiv3)

Re: Start Up Error AFter Download: Device Driver Stuck in Infinite Loop (due to xgiv3

Greetings, Coco Beans.

No need to download the nVidia driver - your report shows that your machine is running the XGI graphics.

Since you're able to boot into Safe Mode, I'd suggest first that you try to restore your computer to an earlier time:

1. Click Start > All Programs > Accessories > System Tools > System Restore.

2. On the Welcome to System Restore page, click to select the Restore my computer to an earlier time option, and then click Next.

3. On the Select a Restore Point page, choose a date prior to when you first experienced the problem (if available - if not, choose the earliest possible), and then click Next (note: a System Restore message may appear that lists configuration changes that System Restore will make - click OK).

4. On the Confirm Restore Point Selection page, click Next.

The system should then reboot to an earlier XP configuration.

If this is the case, please let us know, and we can then go forward with resolving any further issues. If the System Restore procedure is not successful, please advise, and we will take other steps.
 

3 more replies
Relevance 52.07%

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture Picture link (hosted on photobucket.com) I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.I tried to uninstall this and let windows update install it again => not worked, same problem.I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

More replies
Relevance 50.84%

I am tying to sync my Samsung Galaxy J7Sky Pro phone with my computer using Samsung Smart Switch Program.
When I start the Smart Switch Program and plug in the USB cable from the phone to the computer USB port, the device driver for the phone does not install properly or recognize the phone, as depicted by a yellow exclaimation point for the Galaxy J7 Sky Pro
device driver and AMDA00 interface under system devices.
I tried reinstalling the Samsung phone device driver but still get the above exclaimation for these drivers.
I then shut down and restarted the Samsung phone and the drivers reinstalled properly and the Smart Switch Program worked. 

My issue is that the next time I restarted my computer, I get the same device driver errors.
Is there some way to prevent having to restart and reinstall the device drivers each time I want to sync my phone using the Smart Switch program? 
Same issue used to happen with my Samsung Galaxy SIII phone, before I upgraded to the Samsung Galaxy J7 Sky Pro.
It is a real pain in the neck and time waster.

More replies