Computer Support Forum

How to stop PC trying to boot from external USB Buffalo hard disk

Question: How to stop PC trying to boot from external USB Buffalo hard disk

Hi,I have an external USB Buffalo hard disk attached to my Lenovo E73 W7 Pro PC.If i boot with it connected then the PC won't boot through to Windows until i disconnect the Buffalo.I have been into the Bios and set the boot order to not only styart with the HD but also ignore USB and CD ROM.Interestingly before i changed the Bios it would stop the boot and when i disconnected the Buffalo i would get the option to go the bios; now that i have changed the bios although it still doesn't boot through to Windows, when i disconnect the Buffalo the Windows spalsh screen appears immediately. So..My thoughts are that the bios change has been a good thing and now there is a Windows option that needs to be changed to make it boot to Windows ignoring the Buffalo until it has started. Has anyone any advice please? Cheers,Simon

More replies
Relevance 100%
Preferred Solution: How to stop PC trying to boot from external USB Buffalo hard disk

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 92.66%

Good day everyone.

I have 500gb Buffalo HD and the problem is that when I plug it in my laptop it makes a clicking noise then after a while the noise stop. And also it does not appear in Computer,it was only appearing in the control panel. I tried disk management and other software to retrieve and solve this but it doesnt work. Can I still recover my file without going to retrieval company? can I still save my hard disk and use it again? thanks
 

Answer:Buffalo external hard disk problem

Doesn't sound like it. Sounds like you are hosed. Suppose you could try the freezer trick, although I've never seen it work.
 

2 more replies
Relevance 91.43%

Hi....

I have a Buffalo 120 GB external Hard Disk that i connect to my HP Compaq Pressario M2000. It has been with me since 2 yrs. It was always fine, except for not being recognised a few months ago....it came back all by itself. So i was fine. I have a lot of data in it which is very important. So please give me any option other than formatting it.

When i rightclick on my My Computer and go to Manage > Disk Management and it shows me my Drive as F: 111.78 GB Healthy (Active).
But it does not display the name that i have given it (Rockin Ram) and when i try opening it, it says " F: is not acessible " The file drive is corrupted and unreadable ".

I have an internet connection with unlimited download, so please let me know if i need to download some software or install anything to repair it. I will do it, but please help me with this issue.
I believe you coz my previous problem was solved by you people !
 

Answer:My Buffalo 120 GB External Hard Disk recognised, but not responding!

The drive could have failed. Try to plug it into another pc if you have another one.
 

6 more replies
Relevance 75.85%

Hi,
I have an external (was internal) hard disk, which did have a few Operating Systems on it. However, I no longer want it to be bootable, since I simply want it as external storage.

I have already completely zeroed it, but it still tries to boot from it.

Any ideas?
Thanks.
 

Answer:Solved: Stop an external hard disk being bootable

Have you reset the boot order in your bios so that it no longer looks to the external drive as the first boot option?

letchworth
 

3 more replies
Relevance 74.62%

Hi can someone help please? I have a buffalo external hard drive that is recognised in system and say's drivers are working. But I can not access any files from it either through the computer or software. anyone got any ideas as to why. It was working fine up until yesterday.
 

Answer:Buffalo External Hard Drive

8 more replies
Relevance 74.62%

Hi, does anyone know of "Buffalo"s reliability? It seems my current external drive is about to give up. Its a Western Digital 'My Book' 320gb and its making odd "clicking noises".Yesterday it disappeared from 'my computer' and i eventually got it working after pulling out all the plugs and re-booting pc. The "Buffalo DriveStation" 500gb looks a good buy from Play.com for 50. Any thoughts please - Tony

Answer:Buffalo External Hard Drive

To save me typing twice click here

5 more replies
Relevance 73.8%

Hi Everyone,

I am using a Buffalo LinkStation (LS-QVL), it is configured for RAID 10 and has 4 Terabytes of capacity. I am not using anywhere near the full capacity (instead I am only using about 6%!). It has occurred to me that I should make an off-site backup of the content on the LinkStation. Toward this end I would like to backup the contents of the LinkStation to an external USB hard drive.

Can anybody tell me if it is possible to backup files from this NAS to an external hard drive? If it is possible any advice on how to set this up will be greatly appreciated.

Kind Regards,

Davo
 

Answer:Backing up Buffalo NAS to an external hard drive

Unless your NAS has a provision to mount the external hard drive via USB and supports file transfers between the volumes, you're going to have to do this over the network with the external hard drive connected to a PC that is connected to the NAS.
 

2 more replies
Relevance 73.8%

Hi all,

New to this site, so hope this is in the right place and hope you can help!

I have just purchased a 500G Buffalo external hard drive, HD-PC500U2/BK-EU. Plug it in and it is recognised by my P.C (running XP) but I cannot go any further and cannot run the DriveNavi.exe file which is on the external HD. All I get are the following error messages

The application failed to inialize properly (0xc0000006). Click OK to terminate the application.

and

F:\DriveNavi.exe
Only part of a ReadProcessMemory or WriteProcessMemory request was completed

and

F:\DriveNavi.exe is not a valid Win32 application

I have trawled the net to try to find a solution and Buffalo support are no use at all...and extremely frustrated and would appreciate any help, please

AP3
 

Answer:Buffalo External Hard drive problem-Help please!

That sounds like an autorun request for the bundled DriveNavi.exe program. And "trawled the net"? . I think you've gotta format the HDD. That might just do the trick.
 

1 more replies
Relevance 73.39%

Hi,I usually have my buffalo external hdd connected to my dell studio 15. I tried shutting down once but accidentally put it into hibernation. So after it hibernated I switched it back on, the hdd would spin up a couple of times, but as it got to the desktop it would spin down. I try to access the hdd and I can see the folders etc, when I try entering a folder such as "music" for example, the hdd would spin up, but then a message would say the folder music is unavailable. So I refresh the window, and the music folder disappears! just like that, now after the spin up, i can access the rest of the folders, but the "music" is just gone forever. Does anyone know what's going on or how I can get that folder back. It was actually the "documents" folder in my case, but music was an example.Thanks

Answer:Buffalo external hard drive and Vista Hibernation

hi again, Problem has been fixed and the files are still there! Basically used vista scan disk to fix errors option and it recovered my files. Phew....thought I'd lost it all.

1 more replies
Relevance 72.57%

I have subject device running from Win7 64 bit.
It's decided to show capacity as 49.5Gb instead of 1Tb.
Any ideas welcomed.
Rick

Answer:Buffalo Ministation 1TB USB 2.0 Slimline Portable External Hard Drive

On the search window type Disk manage. From the options, open "Create and format hard disk partitions"
Expand the Status column so it can be readable.
Take a snapshot of the screen and upload the image.

2 more replies
Relevance 72.57%

My Buffalo external drive shows empty on window 7 pro, no previous signs of malfunction just a little slow before this incident.
when i trying to right click and check properties, after a while windows shows a message saying " data error (Cyclic redundancy check)"
It contains all my family photos for the last years, please if anyone can help me with this issue I will appreciate
thanks

More replies
Relevance 72.57%

Can anyone tell me if the above Exteral HDD will be compatable with windows 8. It works fine with Windows 7 Premium. Thanks.

Moonshine.

Answer:Buffalo MiniStation Lite 320 Gb Portable USB 2.0 External Hard Drive..

Unlikely anyone has your specific drive. But in general, i've never seen a USB device that didn't work in Windows 8 that worked in Windows 7.

1 more replies
Relevance 71.75%

I have a buffalo 500gb external HD which I use mainly as a back up for photos/docs/vids etc., I have been deleting alot of uneccessary things on it and it now contains only 47gb of material, however when I click on the properties it is still showing 270gb free of 465gb, this means that there is still 195gb of material when in fact there is only 47gb of material on it in total - how can this be?? I have unplugged the buffalo drive, left it a while and replugged it in but its still showing (in the properties of the drive) that it has 270gb free of 465gb, very odd, thanks LAPTOPDUNCE

Answer:buffalo external hard drive showing wrong amount in properties???

Show hidden and system files click here
If there is a Recycle Bin Folder on the drive, go into it and Empty or manually delete contents.

10 more replies
Relevance 70.93%

Hello..my external hard disk recently cannot be seen in My Computer.I try to find at disk management and i found it but it show like in the picture..i really dont want to format my external hard disk because inside it many of my important data stored in it..can someone help me to solve this problem other than format my external hard dosk?i really need my data in my external...your help is much needed

Answer:Xternal Hard Disk can't detect at my computer(Buffalo Ministation 1TB)

Hello Chaosadan and welcome to Seven Forums.

According to your screenshot the external hard drive (Disk 1) has no data on it. All 931.51GB is unallocated (unused) space. It also doesn't have a drive letter assigned to it. So for some reason your computer is treating the external hard drive as a newly formatted (blank) drive. Can you assign a drive letter to the external drive? Perhaps that will allow your computer to recognize the external drive and the data on it.

Drive Letter - Add, Change, or Remove in Windows

A second possibility is to use a free utility called MiniTool Partition Wizard. It has a function called Partition Recovery that lets you scan for and recover lost or deleted partitions.

MiniTool Partition Wizard

2 more replies
Relevance 69.7%

I have come across a bit of a problem. This morning I replaced 2 of my case fans as they were getting old and noisy. I booted the pc and It would not boot after stating the processor present. I tried mutiple times cleaned my cpufan etc and tried again. Still failed. After removing everything I booted fine and it turns out my pc wont boot into bios or past the processor information if my external hardisk is turned on. This hardisk is just used for backup/storage so there is not boot info on it. It worked fine before I changed the fans. Once the pc is in windows I can turn the external disk on and it works fine. But the pc wont boot with it on. any ideas or suggestions ?

Answer:Pc Wont Boot with external Hard disk on

BIOS boot sequence?

10 more replies
Relevance 69.7%

my o.s or driver got corrupted..itsnt booting..only one drive in my lap..since i need my date i couldnt format and reinstall os...i have one driver c.d..i tried to repair but invain..its not bootin thro safe mode too..i inserted xp cd and tried to repair os..i went to cmd prompt ..then in cmd i tried to copy data from c: to my pen drive..but its says no access ..pls any suggestion to copy my data ..can i boot xp thro any ex.hard disk and is t possible to copy data after that???
 

Answer:Is it possible to boot my Dell through external hard disk

There are a number of BootCDs you could use. A good favorite of many is The Ultimate BootCD

Yes backup to USB flash, then install Xp clean (removing the partition when asked in the initial setup process)

Note, you do not need to create a new partition or even format the drive, as Windows setup will automatically create an NTFS formatted file system, on a non-partitioned drive, during Windows install.
 

6 more replies
Relevance 69.29%

how to boot from external hard disk? my cd rom is broken and i use vista and i want to go back to xp because vista is so bad but when i put the xp files in external hard disk and run the setup it says i cant install older version of windows, someone help please

Answer:boot from external hard disk or flash memory

Then ought to work. http://www.computing.net/answers/wi...1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.

2 more replies
Relevance 69.29%

Hello,

I have been trying unsuccsessfully to boot from an external hard drive. I have a spare HDD with Windows Vista, which I have mounted on an external case. While on start screen, I press F12, I do find the external drive and select it, but while it begins booting it fails after a few seconds, resulting on blue screen. The OS I am using on the internal HDD is Windows 10.

I also tried to swap HDDs and the result was quite the same. While on starting screen with windows 10 logo, after a while, a message is shown which briefly says that 'the system encountered a problem while booting and has to restart".

I came to the conclusion that either the BIOS doesn't support booting fron external HDDs or the USB 2.0 is too slow for running the OS via a USB port...

Any answer or suggestions would be largely appreciated.

Thank you.

Answer:Satellite A200 - 1CR boot from external hard disk

I think that you cannot start OS from external HDD. In the past several forum users have tried to do the same but without success.

2 more replies
Relevance 69.29%

Hello,

My internal laptop hard drive is a Hitach HTS725050A9A360 and it recently started to get bad sectors. Given that my laptop is under warranty, I decided to ship it to Sony to have it replaced. Problem is, they don't restore data and their service centre is in the US and I am in the UK. So I decided to clone this drive through Norton Ghost 15 to my external 500Gb ST350083 0AS iOmega External USB drive (succesfully) and boot from the external drive until Sony sends a replacement drive.

It can boot, but then restarts shortly after 'Starting Windows' shows up and won't even boot into Safe Mode... so we have two identical installs of W7 on different drives and one fails to boot. Any idea how to get this fixed?

Dmitry

Answer:External Hard Disk Drive won't boot after Ghosting

Hello fatcatsat. Welcome to the Forum.

I have never tried to do what you are doing, but my guess is that Windows is waking up expecting to be in one place and finds itself in another. While installing an OS on an external drive is common, cloning to an external is not the same thing.

You may be able to get it to boot by repairing the MBR on the external's install.
Startup Repair
Startup Repair - Run 3 Separate Times
System Repair Disc - Create

Worth a shot.

9 more replies
Relevance 68.47%

hi there!

this is my first post. please excuse if i have done it in the wrong place.

using axiomatic software i backedup my system partition of 20 gb to the 80 gb exboot usb external disk.

i enabled, boot from usb in my bios, selected external disk as first boot priority and started the computer.

the external disk boots, reaches the windows splash screen, i can see the moving illuminated squares, but windows fails to load.

the computer reboots and goes to the screen which asks whether to load normally, or safe mode etc?

i tried the options, safe mode etc, but no luck.

could anybody suggest any error on my part?

thanks for reading and for any help in advance.

i am using windows xp with service pack 2.

i use a intel 915 gav motherboard.

salt
 

Answer:exboot usb external hard disk fails to boot into windows

Can you please post a link to the axiomatic program that you used to back up your hard drive.
 

10 more replies
Relevance 67.65%

HOW CAN I BOOT AND INSTALL THE OPERATING SOFTWARE (XP) IN R50e-1834-BWG-THINKPAD LAPTOP BY USING EXTERANAL HARD DISK OR DVD/CD ROM DRIVE? KINDLY REPLY SOON THANKYOU REGARDS,KHAJA MOINUDDINMessage Edited by sohailkm on 04-05-2008 08:14 PMMessage Edited by sohailkm on 04-05-2008 08:24 PM

Answer:R50e-How can i boot or install operating software by using external hard disk or cd/dvd ram?

sohailkm, welcome to the forum,
 
you can normally reinstall by pressing the blue Access IBM at start up button which will then boot into the hidden partition allowing a recovery to factory settings.
If this no longer works you can use the internal cd/dvd drive or external drives; in this case you will need to change the boot order in BIOS by pressing F1 when starting and select the Start Up menu.

1 more replies
Relevance 65.6%

hi all,

i would like to ask you a very basic question:

What is the difference between an external hard disk and an internal hard disk mounted on external enclosure?

Is using internal hard disk in external enclosure risky in terms of loosing the data?

Is using internal hard disk in external enclosure reliable to use?

kindly let me know as there is a vast difference in the price of these hard disks. The external hard disk is costing more and if i use internal hard disk in external enclosure price is very much reduced.

my only concern about using internal hard disk in external enclosure is the reliability.

thanks in advance,

regards,
 

Answer:External Hard Disk v/s Internal Hard Disk in External Enclosure

10 more replies
Relevance 62.32%

My company's computer needs to be patitioned and reformat. The system is still working well. I mean, nothing wrong with anything (weird huh?). Ok the hard disk just need to be 'split'. I mean, make drive C & D on the hard disk. I know how to do that... easy... Then the HD need to be formatted & reinstall windows XP. Ok, easy too..

But the main problem occured before I do anything (partition & format). I have my own bootable CD that I usually use for partitioning & formatting.

Ok, i insert the CD & restart.
I went to BIOS & changed the boot order (1st boot: CD-ROM, 2nd: HDD-0 & 3rd: Floppy). Then restart again.
Ok the bootable CD is excellently loaded.
I typed fdisk, then came the first problem. it says something like 'no fixed disk'. I exit fdisk.
Then I typed format c:, 2nd problem occured. it says something like, 'invalid drive'.
I forgot the error message because the pc is in my office right now. I'm currently at home 'begging for help' So the error message is not accurate. sorry..

I think, if I run the CD, the hard disk will not be loaded (or should I say, hard disk failure). & If I take off the CD & restart again, change the BIOS (1st boot: HDD-0) then windows will load! Weird right?

I don't think my CD is 'corrupted' nor broken because I tried to run the CD from another PC. Yes, I can access the C drive from that PC.

Does anyone have any idea of the ... Read more

Answer:Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

It sounds like it might be the bootable CD you've created is not picking up the HDD's/partitions.
To eliminate this as a posibility travel to bootdisk and grab the WinME bootdisk and boot from there. If it picks up the HDD you can FDISK and Format from there.
The other option is to boot using the XP CD and let it handle the formatting/partitioning duties...

patio.
 

14 more replies
Relevance 61.91%

What is the difference of 3.5 external hard disk (e.g. WD My Book) vs a 3.5 internal hard disk fixed into an enclosure to work like an external hard disk?

Are both good to be use as an external drive to store backup?

What 3.5 enclosure is good?

Thanks

Answer:3.5 external hard disk vs 3.5 internal hard disk with enclosure?

What do you mean fixed into an enclosure to work like an external drive? Are you referring to a My Book 3.0 VIA USB 3.0.... vs.... an internal SATA III SSD or HDD? Be a little more specific.

8 more replies
Relevance 61.91%

i have a 80gb internal hard disk since it was not sufficient i switched up to a 500gb hard disk so i want to know whether i can use my 80gb hard disk as an external hard disk
if so how please instruct me
 

Answer:how to change a internal hard disk to a external hard disk

Is the 80gb drive ide or sata?
 

3 more replies
Relevance 60.27%

 USB.jpg   66.11KB
  0 downloads
 USB1.jpg   94.2KB
  0 downloads
 USB2.jpg   90.44KB
  0 downloadsDear all,
I will enclose here my complaint which I send to motherboard maker Gigabyte, regarding USB external hard disk problem. Please read it and if anybody knows how to solve this, thanks.
--------------------------------------------------------------------------------
My computer has external hard drive connected to USB 2.0 port(s), which is extremely slow. Drive is Transcend StoreJet. No drivers exist for it. It works perfectly for other I/O operations like copy, paste, delete,etc. When I try to make hard disk image with any program, and store it on Transcend Store Jet, speed starts with 50MB/s but drops to nearly zero in few minutes. You can see example on attached picture. It is the same with any program. Disk image would take more than one day to complete, if it completes at all. Actually, I never managed to finish image with any disk imaging software. I tried all usual software for that: Paragon, Aomei, Acronis, EaseusToDo, Drive XML, etc. Are there any USB or other drivers which are responsible for this issue? Can Gigabyte be serious regarding its costumers and provide them solution in order to use USB ports for most important thing (backup)? In this case, making disk image is totally impossible. USB 2.0 ports have speed оf 480 Mbit/s, theoretical. This is far cry from situation here. So, ... Read more

Answer:Problem with slow (impossible) disk image making on USB 2.0 external hard disk

This could be any issue causing your problem , software , usb drive may have errors on it / or ?
Imaging your 150 Gig via Usb will take time { Mine are about 40-50 Gig } Operating System And Programs Only.
 
I personally partition my main Drive eg: c:\ and d:\ and so only the operating system is on C;\
Then use the D;\ to store your personal files. , this way your c:\ wont keep growing in size as you are storing everything there.
If you cant actually do anything with the computer because of warranties as you stated "just serviced" , ask them why you cant Image Drive.
 
Options:
1/ Try another hard drive to backup to.{ Usb will always be slower } than directly connected to Mobo.
2/ Use Mini Tool Partition Wizard [ Free } to create another partition - http://www.partitionwizard.com/partitionmagic/partition-windows-7-system.html
3/ Remove all Temp Files / Restore Points / etc with Ccleaner { Free ] - https://www.piriform.com/CCLEANER
    this will reduce C:\ size to minimal size { defrag drive also }.
4/ Use any program to Image C:\ { I use Acronis }. to the D:\ Backup Folder.
5/ Then copy the image to any portable drive or external if need be.
6/ Use the D:\ for your personal files and folders as a backup also.
 
Sometimes you have to do things yourself - than rely on Service Centres and Costs.
If you run a Business then you claim all your costs incurred.
 
All this will take time but you will have backups and feel at ease.

6 more replies
Relevance 59.86%

Couple of hours ago my Windows 7 could not recognize my external USB hard disk (Maxtor Basic). It came up on Disk Management and Device Manager but not on My Computer. However I fixed it (by deleting its line off regedit in HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices, plugging out the ext. HD and plugging back in). Windows automatically installed the drivers and I could access the drive.

But now Windows shows my Maxtor as a fixed disk drive, instead of "devices with removable storage". I still have the option to "Safely remove hardware and eject media" from taskbar, however I rather have Windows treating it as a Removable USB Storage so that the disk can sleep when not in use. I am pretty sure it has something to do with regedit, so any help would be appreciated.

Answer:USB external hard disk shows up as internal fixed disk

Welcome to Windows 7 Support Forums, Sactyr.
A word of caution! Its never a good idea to alter your register,
IMHO please review your device manager and check your devices for your disk drives, check for any warnings in the driver area.
I'm attaching my screenshot for comparison as I have a similar configuration.

8 more replies
Relevance 59.86%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 59.86%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 59.86%

If I am saving a backup to internal hard disk vs USB 3.0/2.0 USB external hard disk

1. Backing up to an internal 3.5 hard disk vs backing up to an external 2.5 hard disk using USB 3.0, roughly how much extra time would the external backup need to complete the backup process?

2. Backing up to an internal 3.5 hard disk vs backing up to an external 2.5 hard disk using USB 2.0, roughly how much extra time would the external backup need to complete the backup process?

Thanks

Answer:Speed of saving to internal hard disk vs USB 3.0/2.0 external disk?

There's no definitive answer, it would all depend on which internal drives you had (SSD/HDD, SATA 6GB, SATA 3GB) and which external drives you had and their relative transfer speeds. It's all just guesswork without that info.

2 more replies
Relevance 59.86%

I have a problem regarding my external Toshiba hard disk 500 GB where it can?t be detected in my computer and also disk management. I have formatted the external HD since I was asked to format it when an error popped up.
So I formatted it and after the formatting completed, I tried to connect the hard disk to my Windows Win 7 laptop. When I connect it to the laptop, it can?t be detected and yet the hard disk is blinking with its white light like it used to when it is connected to the laptop. I tried the disk management thingy, but it can?t detect my hard disk. I tried in other laptops but the result is same
What can I do to make it better? Please help me.
 

Answer:External hard disk not detected in My Computer and in Disk Management

First off, how old is your Toshiba external HDD? Also, when it starts to spin up, do you hear any sort of clicking or whining noise?

If you hear any noises that sound off, it's possible your external HDD is failing.

When you formatted it, what file system did you use to do so? Because sometimes even if Windows can't detect it, I have had success with booting with a Ubuntu Live CD, and then connecting the external HDD in order to format it that way. It all has to do with how Windows formats HDD's and how Ubuntu and other Linux systems do.

If you can I recommend downloading Ubuntu onto a CD and boot to it on one of your computers, in the Live CD mode, so it doesn't install anything. Once its loaded, plug in the Toshiba and try to format it as NTFS (this is important, because Ubuntu doesn't use it as a native file system, so you need to make sure that NTFS is selected on the format window, not EXT4 or the other types of Linux OS File Systems)

If it doesn't work, post back here, and I will see if I can help you some more. Also feel free to PM me if you have any other issues.

Regards,
-Alex
 

1 more replies
Relevance 59.86%

Hello,

I have run into a problem that has been causing me quite a bit of headache as of late. A week ago, my WD Elements External Hard Disk is not displaying under hard disk drives, but does display under Devices and Printers. This is what it shows under computer management:

I have tried to initialize the disk using MBR and GPT options but failed receiving I/O Disk Error.

Please help, thank you.

More replies
Relevance 59.45%

I recently bought a BUFFALO  External  USB  DVD  RW ;  I am unable to use it with my COMPAQ  MINI  110-1100 DX LAPTOP  Product  Number : VM146UA#ABA . My mini Laptop does not have an inbuilt DVD RW. Will  somebody please guide about as to how to use this External DVD to install any software CD on to my Laptop ? Also, how to see & listen to a DVD using this DVD RW ? Can I use this DVD RW with my Desk-Top PC also ? Please guide in details and help me. Many thanks in advance. 

Answer:BUFFALO External USB DVD RW

What is the model of your Buffalo DVD-RW drive? Your laptop should automatically detect the drive when you plug it in via USB. Your drive will definitely work with your desktop, too.In the rare case that drivers need to be installed for your DVD drive, you would want to go to the official Buffalo site to download them.

3 more replies
Relevance 59.45%

My external is 2 500g hard drives and is preset for FAT32

I want to be able to put files bigger than 4gs on it, so I have to change it to NTFS, right?

The wall I run into is . . . I will be buying a Macbook Pro in a few weeks and I want to be able to use the HD between the two. From what I read it looks like I could do that with FAT32, but not with NTFS.

I want to know the best thing to do so I don't have to reformat my drive later and have this all be a toilet flush.

I really want to prepare for my mac.

Thanks in advance.
 

Answer:New external HD Buffalo 1TB

I found out I have to use a 3-party program, anyone have any exp with any?
 

1 more replies
Relevance 59.45%

Windows XP sp2 wont boot from hard disk.

After much to do turns out my computer doesnt recognise the hard disk.

I have a seagate 500Gb SATA hard drive, its about a year old, the computer doesnt get hot in the slightest and it shouldnt be dead. I checked the wiring, as far as i can see, its all fine.

only conclusion i come to is that my hard disk is kaput which it shouldnt be. Can anyone give me any other possible solutions to try out before i cry and/or spend money on a new one? theres a lot of data on it i dont want to lose.

If not, ill plug it in to another computer to check, i havent done that yet because it will take me hours - i can only unscrew the hard drive from one side without rearranging the room.

ty!
 

Answer:Hard disk boot failure -> computer won't recognise hard disk

Is your Seagate the 7200.11 series?

We've been seeing a lot of harddrive issues layely that has nothing to do with the drive itself but bad SATA cables aas the cause. Do you have another one you can switch out?

When you say the computer doesn't recognize it we're talking the BIOS here, correct?

Another suggestion is what you have already suggested but I would "slave" it in antother system and see if you can access it that way.
 

5 more replies
Relevance 59.45%

My computer keeps refusing to start up. I have to re-install windows each time. Hard disk keeps making a "funny" noise. I have an 80gb hard drive and have used 40gb so far. I want to back up everything incase my hard drive fails. Could I backup to an external disk drive? would I need to install windows on the external drive. or is there a better way to save all my files, downloads, and software? When I bought the PC it came with software already installed and a recovery disk. But obviously I dont want restore to factory settings as I will loose everything. Any advice would be much appreciated.

Answer:backup from hard disk to external disk drive

You could use commercially available back up software like Ghost click here or Acronis click here

4 more replies
Relevance 59.45%

I have an external hard disk which got corrupted. When i connect the disk through USB it shows as an unknown device in the disk management with no option to format.

In My computer the device is showing as H: drive but unable to access it. It asks if i want to format or not but when i go for format it does not do it. I want to erase the disk completely as of now. What should i do??

I tried to load it from linux but there it shows as Device Error. Disk Failure is Imminent.

Can something be done or is it a hardware failure.
 

Answer:External Hard disk showing as RAW in disk management

Sounds like the drive is failing or the circuitry in the enclosure is faulty.

I would first remove the drive from the enclosure and hook it up as a slave to a desktop PC. See if you can then access it. If you can, then post back for further instructions with the version of your OS.
 

3 more replies
Relevance 59.45%

Is it possible to create the recovery media on an external hard disk instead of using USB flash drive or optical media?

I've been getting errors while creating the the recovery media on optical drive.

Thanks!

Answer:How do I create a recovery disk using external hard disk?

Hi

As far as I know it?s impossible to create an Toshiba image on the HDD?
You need to burn the image on the disk (DVD).

Greets

2 more replies
Relevance 59.04%

Hello,

This one is really bugging me because I have checked everything, and I cannot fathom out what is causing the disconnection apart from, either is a MB issue or driver issue...?

Whenever, I turn on my computer and Windows loads it will not load the USB External HDD which has been set to AUTO so it will load when Windows loads. I have tried manual switch but this does not work either. The HDD is a combo HDD with Firewire and USB 2.x although, if I use Firewire instead its fine...?

What is happening is that Device Manager in disabling the device for some reason, and the only way in which I can get Device Manager to recognise the "EXT HDD" is to search for new hardware and then it works...?

The only thing that I found to be a little odd was there is no set power showing for the USB Mass Storage Device 0 mA I know it is the right port location because it is the same number.

Any ideas why this has started to do this...? Any suggestion would be deeply appreciated.

There is something I forgot to mention and that is the battery needs replacing. I have never had a battery die on me on a motherboard ever. The only conclusion I can think for the reason why the battery has been drained in the ROC Logo on the MB I used to leave on and I think it drained the motherboard battery. If the power is terminated, example the PSU is turned off then I have to reset the BIOS. Although, I don't think this is related but I thought I would mention it.

Answer:Buffalo External USB 2.x HDD keep disconnecting

It wouldn't hurt to pick up and install a new battery.

You should also take a look and try to find the USB drivers for your motherboard (or just the motherboard drivers), as it sounds like it isn't recognizing it properly. Also make sure that Legacy USB support is enabled in BIOS.

~Lordbob

2 more replies
Relevance 59.04%

Hi allfamily member purchased one of these and proceeded to install it without reading any documentation. 2 basic questions I need help with:1. Theyre running XP pro but chose the FAT32 option to format the drive during install. Main PC is NTFS. Will this causae any problems?2. Assuming the answer to q1 is no - the drive has install files, log files, and folders all over the place on it. Once installed and back up is running is it safe to either tidy these files into one folder and leave them on the external drive, or take them off the drive to increase space, and keep them on main PC?Hope that all makes sense.ThanksSi67

Answer:Buffalo External Hardrive

what is FAT32click here

10 more replies
Relevance 59.04%

I can somehow "see" it in my computer but cant recall what place..it does! appear in my laptop but just cant see it at "my computer" place for me to double click it and go inside..access the content in it..

my friends Vista and XP hav NO PROBLEM at all to get access into this BUFFALO MINISTATION external HDD..

please help me..

Answer:cannot go into BUFFALO External HDD(window 7)..

Could you please post a screenshot of your problem?

9 more replies
Relevance 59.04%

I can no longer boot 64-bit Win 7 Pro in normal or Safe Mode on one computer due to BSOD: STOP 0x0000007B (0XFFFF880009A97E8, 0XFFFFFFFFC0000034, 0, 0).

But there is additional, extremely important info: I have two separate month-old backup boot partitions, and they won't boot either for exactly the same reason! One is on a second partition of the main SSD (my regular boot partition is on the first partition), and the other is on a regular hard disk. Therefore, it's extremely unlikely that this is a disk drive or partition problem.

The last thing I did was use AutoRuns to disable some unwanted startups my startup manager (Chameleon Startup Manager) didn't see and thus couldn't disable. However, as I said above, I have two separate month-old backup boot partitions, and I made no changes whatsoever to these, so surely one or the other should boot fine, but I get the same BSOD on all boot partitions!

What I've done so far:
- Ran Startup Repair 6 times total. Each time it reports that it could not repair the problem.

- Tried system restore. It reported every restore attempt failed.

- Booted up with LSoft Active @ Boot Disk, latest version (15.x). Then I ran Check Disk on all disks and partitions, and no problems were reported anywhere. Then I examined all the disks and partitions, and the reports said everything is perfect: all partitions were of the right type, and the integrity of all disks were ideal. Then I ran it's MemTest for 8 hours with no problems.... Read more

Answer:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

6 more replies
Relevance 59.04%

I can no longer boot 64-bit Win 7 Pro in normal or Safe Mode on one computer due to BSOD: STOP 0x0000007B (0XFFFF880009A97E8, 0XFFFFFFFFC0000034, 0, 0).

But there is additional, extremely important info: I have two separate month-old backup boot partitions, and they won't boot either for exactly the same reason! One is on a second partition of the main SSD (my regular boot partition is on the first partition), and the other is on a regular hard disk. Therefore, it's extremely unlikely that this is a disk drive or partition problem.

The last thing I did was use AutoRuns to disable some unwanted startups my startup manager (Chameleon Startup Manager) didn't see and thus couldn't disable. However, as I said above, I have two separate month-old backup boot partitions, and I made no changes whatsoever to these, so surely one or the other should boot fine, but I get the same BSOD on all boot partitions!

What I've done so far:
- Ran Startup Repair 6 times total. Each time it reports that it could not repair the problem.

- Tried system restore. It reported every restore attempt failed.

- Booted up with LSoft Active @ Boot Disk, latest version (15.x). Then I ran Check Disk on all disks and partitions, and no problems were reported anywhere. Then I examined all the disks and partitions, and the reports said everything is perfect: all partitions were of the right type, and the integrity of all disks were ideal. Then I ran it's MemTest for 8 hours with no problems.... Read more

Answer:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

6 more replies
Relevance 59.04%

I can no longer boot 64-bit Win 7 Pro in normal or Safe Mode on one computer due to BSOD: STOP 0x0000007B (0XFFFF880009A97E8, 0XFFFFFFFFC0000034, 0, 0).

But there is additional, extremely important info: I have two separate month-old backup boot partitions, and they won't boot either for exactly the same reason! One is on a second partition of the main SSD (my regular boot partition is on the first partition), and the other is on a regular hard disk. Therefore, it's extremely unlikely that this is a disk drive or partition problem.

The last thing I did was use AutoRuns to disable some unwanted startups my startup manager (Chameleon Startup Manager) didn't see and thus couldn't disable. However, as I said above, I have two separate month-old backup boot partitions, and I made no changes whatsoever to these, so surely one or the other should boot fine, but I get the same BSOD on all boot partitions!

What I've done so far:
- Ran Startup Repair 6 times total. Each time it reports that it could not repair the problem.

- Tried system restore. It reported every restore attempt failed.

- Booted up with LSoft Active @ Boot Disk, latest version (15.x). Then I ran Check Disk on all disks and partitions, and no problems were reported anywhere. Then I examined all the disks and partitions, and the reports said everything is perfect: all partitions were of the right type, and the integrity of all disks were ideal. Then I ran it's MemTest for 8 hours with no problems.... Read more

Answer:Win7 Can't Boot or Safe Boot any disk/part due to STOP 0x0000007B

0x7B's are often caused by physical disk failure. Remove the disk and install it into another computer. Now use SeaTools for DOS to check the drive. Unfortunately that is the only option available.

SeaTools for DOS and Windows - How to Use

6 more replies
Relevance 58.63%

Gday

I have emailed Paragon and am awaiting there reply, but you guys seem to know a lot more and try and solve the problem

Up to this point I have used either Acronis or Paragon for my backups, I prefer Paragon over Acronis, mainly because the restore by Paragon is far quicker.

I have both bootable CD's, but in this instance I would like to concentrate on Paragon.

I downloaded Paragon's Advanced Recovery CD. 2009 Build 6730. Put it in my rom and booted ....... looked at a black screen for 10 minutes. Removed it and rebooted, it got stuck at the loading of Vista, then I got another black screen no hard drive movement.

Rebooted again, this time with the regular Paragon bootable CD. It booted into the recovery console.

Now this is where things go from bad to worse. I tried finding my OS, after a lengthy period I received an error disk 2 i/o fault!!! ....... no operating system found.

Now disk 2 is my external hard drive where my backups are kept.

So I rebooted with the CD in, went into the recovery console and clicked on "safe restore", after playing the waiting game I get a message disk 2 i/o fault!!!.

Took out the Paragon CD, put in the Vista one, tried a repair, but there was no OS to repair .

So I installed Vista, and because I didn't want to have to reinstall all of my programs again (yer lazy I know, but that's what backup's are for).

Checked with the fresh install, that my two external hard drives, had there drivers and were present. They were ... Read more

Answer:Paragon Hard Disk Manager Suite & USB External Hard Drive

Anyone?

3 more replies
Relevance 58.63%

hi there..

my name is Anis...i just bought external hard drive 500gb...but after I formatted it..it's just about 400++ gb can be used..i would like to know..how to use the extra/reserve space for my ext hard disk?by any means, i want to fully use my 500gb space for the external...please help me...thank you...
 

Answer:How to fully use the extra hard disk space for external hard drive?

It should have about 465GB, what are you seeing?

You will not have 500GB due to the conversion between binary and decimal for reporting sizes.
 

1 more replies
Relevance 58.63%

[Seriously need help] External hard disk causes hard drive failures & OS crashes
The thread is rather long. Only read what you think important. Skip the rest!

We have a serious but mysterious problem. We have spent already one week but drawing a blank.
Two hard drives have been crashed and failed (unreadable). One computer has hung a few times unexpectedly and had one weird restart (no memory dump produced).
I suspect all the recent problems have to do with the new USB external hard disk (Buffalo MiniStation Lite: HD-PE250U2).

**********
Formatting USB external hard disk
**********
Originally I would like to use the program given by Buffalo to format the external drive once but we failed. We simply used Windows to reformat the drive into NTFS. I did not use the TurboSpeed advertised by Buffalo, or run its free program.

**********
Case A: Multi-transfer causes system crashes?
**********
The first time we met the problem.
We were trying to help a friend to backup data on an old drive, about a few years old. We plugged in the Buffalo USB portable hard drive and transferred a whole lot of files to the drive. Several cop/cut-and-paste operations were active at that time. The whole system completely froze up. It doesn't respond at all. Only a hard restart could help.
Restarted. Tranferred again. Several cop/cut-and-paste operations were active.
Hard drive crashed - the beginning of the nightmare!
Windows restarted. Chkdsk was running. Saw many lines of messages with:
&... Read more

Answer:[Seriously need help] External hard disk causes hard drive failures & OS crashes

7 more replies
Relevance 58.22%

Hi

I bought a brandnew Buffalo 3TB external HDD Drive station (USB 3.0) (HD-LB3.0TU3-EU)
and wanted to make a second backup of my files which are on another Western Digital 3TB USB 3.0 external harddrive.

So i plugged both in and both were recognized without problem. Then i began to copy the files from the WD to the Buffalo harddrive (both attached via usb 3.0) and it just copied 1 folder and told me that the original file location is not anymore existing and stopped copying.
And somehow my WD drive was not showing up anymore.(but still my buffalo drive)
The WD even did not show up in the disc management setup!
So i decided to reboot and before i did it i removed the buffalo drive via the "safely remove hardware and eject media" button(Right at the startup corner right bottom of the screen).
Instantly after hitting this button the buffalo drive began to make a horrible repeating scratching noise, like trying to park or move the hdd heads continuously). I waited 30 secs then i pushed the shoot down button, nothing after 2 mins waiting for the shutdown of windows i pushed the reset button and reentered win8

Fortunately my wd drive with my files was recognized but not the buffalo drive anymore
At the disk management setup it gives me the initialise disk where i can choose between MBR and GUID but with both options it gives me an I/O drive error
I see it as an offline HDD and cannot do anything with it not even remove it.
And i connected it on my Windows 7 laptop, sa... Read more

Answer:Windows 8 destroyed my Buffalo 3GB external HDD

I don't understand how Windows 8 could "destroy" a hard drive. It sounds like a hardware failure to me. Return the drive to your vendor.

4 more replies
Relevance 58.22%

Hi,

I've got a 1TB Buffalo USB external drive. It worked great until about 2 days ago. It was pre-formatted to FAT32, needing to put a 10 gig file on it, I reformatted it to NTFS. No problem.

Except my Xbox, my laptop, and my PS3 didn't recognise it anymore. Only the desktop did. I checked online, it wasn't a problem, cause PS3 and Xbox only read FAT 32 hard drives... so i knew i just needed to format back, and it would all be fine.

So I tried to format it back, but FAT32 was not an option. only exFAT. After reading about for a bit i found out i could format in FAT32 from the CMD dos Prompt.

So I tried that. It stayed at 0% for what seemed like forever, and then the system shut down.

I rebooted and now my drive isn't there. It shows in device manager as "hard drive" with no extra details, but says it's working.

It shows in Drive Manager, but is listed as "Unallocated" and "not initalised"

I know i need to initialise it to get it show again, however anytime i try I get this error:
Data Error (Cyclic redundacy check)

Can someone please help? I dont care if i lose all the data on it, I just want it reformatted and reinitalised so i can start using it again.

Thanks in advance to anyone who helps in any way.
 

Answer:Cant initalise my external 1TB Buffalo drive.

The 1st part of this tutorial describes how to initialize a hard drive.

http://www.microsoft.com/windowsxp/using/setup/tips/advanced/ntfs.mspx
 

3 more replies
Relevance 58.22%

Buffalo HD-PET640U2/R-EU

Hello. I've been having problems with the above drive (similar to this previous thread). I've had the drive for about a year & a half. It worked fine (on Win XP Home) up until a few days ago, when I connected it to my new laptop (Win 7).

On connecting, a warning message came up saying that Windows had detected disk errors - did I want to scan it? I said Yes, it completed the scan (no errors), but I couldn't access any of the files in Windows Explorer. I Safely Removed USB Hardware and tried again, but said No to the error scan ("Are you sure, some files may be corrupted?"). On continuing, I could see all my files.

I then selected Windows Scandisk, and once the scan completed the HDD was very slow to select. It didn't show any of my files again, and showed the following error messages whenever I tried to access it:

Local Disk (E)
You need to format the disk in drive E: before you can use it.
Do you want to format it?

Error checking
The disk check could not be performed because the disk is not formatted.
The disk check could not be performed because Windows can't access the disk.
Would you like to format the disk?

Location is not available
E:\\ is not accessible.
The volume does not contain a recognised file system.
Please make sure that all required file system drivers are loaded and that the volume is not corrupted.

I have tried it on all 4 USB2 & USB3 ports, and my other Buffalo external HDDs work f... Read more

Answer:Buffalo HD-PET640U2/R-EU external HDD not recognised

Hi,

Do NOT format it - that will result in you losing your files.

Use the Partition Wizard partition recovery software to try and recover the partition to another disk.

Regards,
Golden

5 more replies
Relevance 58.22%

Hi, I am looking for a driver for a Buffalo HD-CE500U2-EU. Any thoughts please?
 

Answer:Solved: External Buffalo Drive

6 more replies
Relevance 58.22%

I have just got a Buffalo 500gb external hard drive, it has installed perfectly on my windows XP laptop, however when I try and install it on my other laptop with Windows vista, it starts that "device driver install" icon in the system tray but when I click on "my computer" from the start menu I cant find the drive!! - the funny thing is that it DOES appear when I go into the "start" menu and then "control panel" and "system" and then in the "device manager" I can find the Buffalo USB drive called "HD-PVU2" BUT it wont show in the drives on "my computer" and its not possible to transfer data to the drive, any suggestions anyone??? thanks PCDIMWIT

Answer:+++ Buffalo 500gb external USB drive ++

Go to 'My Computer' and select Manage, then click on 'Disk Management' - right click the drive then choose Format. It should then show ok.

10 more replies
Relevance 58.22%

Hello. I've had the above drive for about a year & a half. It worked fine (on Win XP Home) up until a few days ago, when I connected it to my new laptop (Win 7).
On connecting, a warning message came up saying that Windows had detected disk errors - did I want to scan it? I said Yes, it completed the scan (no errors), but I couldn't access any of the files in Windows Explorer. I Safely Removed USB Hardware and tried again, but said No to the error scan ("Are you sure, some files may be corrupted?"). On continuing, I could see all my files.
I then selected Windows Scandisk, and once the scan completed the HDD was very slow to select. It didn't show any of my files again, and showed the following error messages whenever I tried to access it:
Local Disk (E)
You need to format the disk in drive E: before you can use it.
Do you want to format it?
Error checking
The disk check could not be performed because the disk is not formatted.
The disk check could not be performed because Windows can't access the disk.
Would you like to format the disk?
Location is not available
E:\ is not accessible.
The volume does not contain a recognised file system.
Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
I have tried it on all 4 USB2/3 ports, and my other Buffalo external HDDs work fine.
The HDD appears as 'Buffalo HD-PETU2 USB Device' in:
Control Panel\Hardware and Sound\Devices and Printers
Control Panel\Hardware and Sound ... Read more

Answer:Buffalo HD-PET640U2/R-EU external HDD not recognised

Test Disk will recover FAT and files see here

1 more replies
Relevance 58.22%

I dont know what happened to it but when i plug the usb nothing happens. I tried listening but i heard bothing. I think it stopped spinning. What can i do to get it spinning again? Could i open the drive and put it into my laptop? IS there a way I can recover the data myself?
 

Answer:External Hard Drive Stop Spinning

16 more replies
Relevance 58.22%

Right on startup, my hard drive light on my laptop ( using Vista Ultimate ) is constantly lit. I cannot easily bring up anything right now. I have run Spybot S&D and fixed all of the errors and run a Norton Scan. I ignorantly did a post of just the HT log in my first reply and posted it in the wrong Topic ( Windows vista instead of the Malware Removal subject ). However, after running RSIT (DDS does not work in Vista Ultimate and this was the suggested alternative, here are the results of the info.txt log and the log.txt log:<!-- log.txt --> Logfile of random's system information tool 1.06 (written by random/random)Run by test at 2009-08-05 13:08:47Microsoft? Windows Vista? Ultimate Service Pack 1System drive C: has 40 GB (28%) free of 145 GBTotal RAM: 2046 MB (43% free)Logfile of Trend Micro HijackThis v2.0.2Scan saved at 1:08:52 PM, on 8/5/2009Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v8.00 (8.00.6001.18813)Boot mode: NormalRunning processes:C:\Program Files (x86)\HP\QuickPlay\QPService.exeC:\Program Files (x86)\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exeC:\Program Files (x86)\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exeC:\Program Files (x86)\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exeC:\Program Files (x86)\Java\jre1.6.0\bin\jusched.exeC:\Program Files (x86)\HP\HP Software Update\hpwu... Read more

Answer:Hard Disk LED Will Not Stop!!

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 57.81%

I have a 500GB Buffalo external hard drive that I use for music, pictures and misc backed up documents. The problem is, I seem to be missing a few GB's.

The HD shows:
173 GB of music
2 GB of pictures
5 GB of documents
180 total should be listed....

.... but instead it tells me that 446 GB are being used and the HD is nearly full! For the life of me, I can't figure where all this "extra stuff" is located. Why would my HD be saying it's so full, but I can't find anything else on it?

I did a disk cleanup on the HD, then I did a Windows defrag on it... and it still shows 446 GB being used in total.

Any ideas?
Thanks,
-Steve
 

Answer:Buffalo 500GB External HD -- missing space?

You could backup all the stuff do your desktop and reformat it but that would take some time copying over 180gb of date.

Format will remove all data on that drive.
 

5 more replies
Relevance 57.81%

My ext HDD Buffalo 500Gb became RAW file system. can't even reformat again to NTFS.or to FAT32, the drive has my name before. now i can see LOCAL DRIVE E:, and when i click to properties, i can see, used space 0 bytes, and free space 0 bytes.
i tried several ways, even on command prompt, convert E: /fs:ntfs. still i can't, and on disk management, i even apply mark partition as active and then format it, and it take 5-6 hours and at the end falure.

can some one help me, i really need for my school project, and i cannot efford to buy again.

JIGME
 

Answer:My 500GB Buffalo external HDD became RAW file system

Hi gentpuchong :wave:

Welcome to :grinthumb

You can read how to post a new thread in this Guide.

Before posting you should read all the Posting Guidelines.

To access technical support you may go to the Forums.

Many users like to post system specs in their Profile.

System Specs are always helpful when you seek support, (see the first two suggestions).
And helpers may ask that you post some of your specs in your thread.

You can access many other online TechSpot guides Here.

Enjoy your Stay
 

2 more replies
Relevance 57.4%

Hi all

I have a a major problem happen I picked up a virus or something at an internet cafe when i was printing a document using a usb drive. I had problems with an old computer and replaced it.

A couple of weeks ago i was getting ready to install windows 7 and plugged this thumb drive in not being aware that it had a infection. I then went a brought an new external hard drive. when i got home i plugged it in. Then i discovered that i have a virus. I ran scans and it came up clean. I backed up my data on the drive.

I am now running 7 and i am infected with something. How do i clean the external hard drive so that i can keep the data.

my xp machine is also infected from months ago. Haven't used it again until last night

cheer

vic

Answer:stop cross infection from external hard drive

I am now running 7 and i am infected with something. How do i clean the external hard drive so that i can keep the data.You need to clean the infected machine unless you plan on reformatting and doing a clean install. Without doing that you will only infect any external drives you plug into that machine.External storage media and flash (usb, pen, thumb, jump) drives are prone to infections which involve malware that modifies and loads an autorun.inf (text-based configuration) file into the root folder of all drives (internal, external, removable) along with a malicious executable. When removable media such as a CD/DVD is inserted (mounted), autorun looks for autorun.inf and automatically executes the malicious file to run silently on your computer. For flash drives and other USB storage, autorun.ini uses the Windows Explorer's right-click context menu so that the standard "Open" or "Explore" command starts the file. Malware modifies the context menu (adds a new default command) and redirects to executing the malicious file if the "Open" command is used or double-clicking on the drive icon. When a flash drive becomes infected, the Trojan will infect a system when the removable media is inserted if autorun has not been disabled.Keeping Autorun enabled on USB (pen, thumb, jump) and other removable drives has become a significant security risk due to the increasing number of malware variants that can infect them and transfer the infection to your... Read more

19 more replies
Relevance 57.4%

Hello everyone,I have a T61 and everything works well except the hard disk which is constantly working. The result is a gentle noise on the bottom rightof laptop, always present. I used to have a T42 which when configured on XP to turn off hard disk (through power management), completly turned it off. I could then read or write long open files with a completly silent laptop (used tpfancontrol for controling fan, but this is not the problem here) until I save document or explcitly trigger the hdd (a completly silent laptop is a delight!). The noise of the present T61 is bearable, a kind of a whisper, but once it stops it gets really better for your ears. My problem is that the power manager (set to turn off disk after 3 minutes) works, but something is constantly accessing the hard disk, which prevents the power manager to turn the HDD off. So, sometimes it happens that after 3 minutes the HDD stops, and a hsort time latter, say 15 seconds, it turns on again because "something" used the hdd.The worse is that, most of the time, the hdd is triggered prior to the 3 minutes, so that it keeps always running!!I can see this as the hdd green light flashes.This is always the case, with or without internet, AC or DC.I tried to stop some services (including indexing), but I stopped looking because of the number of services to check!How do I know what service/program is being written on hdd at the specific time where I notice it, or makes it work, such that ... Read more

Answer:How to stop hard disk noise on T61

So far I have tried the following.msconfig--> switch off all services (only three are kep by windows) and startups.RebootWindows power manager-->Max performanceconfiguration ac dc off display never neveroff hard disk 5 mn 3mnstandby        25 mn 20 mnhybernate    2 hours 45 mn This does not work, there is still something accessing the hard disk which keeps it whispering all the time, and when thelight green pops up there is at the same time a slight increase in the noise.Since all services are off, I would be pleased to know what else I can do to check out what is accessing my hard drive, or why it keeps on almost all the time.cuMessage Edited by xtex on 09-03-2008 06:54 AM





T61, UZ2AQGE 2.5 Ghz, XP Pro SP3T400s, NSF20UK, 2.4 GHz, SSD 128 GB, Vista B

9 more replies
Relevance 57.4%

In the Power Manager, I want to set "Stop hard disk rotation" to "Never" for AC settings.  This works temporarily, but whenever the system wakes from sleep mode (or reboots), it gets reset to "After 3 minutes". I have a T61p, Product 6459CTO with BIOS 7LETC7WW (2.27)

Answer:Cannot set "Stop hard disk rotation" to "Never"

are you clicking on the apply botton before exiting pm





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

5 more replies
Relevance 56.99%

I have a desktop PC that does not come with any USB 3 ports on its mainboard. Yesterday I bought a PCI-E to USB 3.0 expansion card with two ports.

I installed the card, connected the floppy power cable, and windows 10 installed its driver with no issues. There is no yellow mark in the device manager.

First I connected my USB 3.0, 2.5" Seagate drive and windows properly recognized it and set its speed at USB 3.0. I copied a lot of files at a constant max speed of about 95 MB/s. So far everything is good.

Then I tried my 3.5" Buffalo USB 3.0 drive. No matter what I did, it simply would not connect at USB 3 speed, only USB 2. I tried both ports. The drive's external power adapter is connected.

Windows does know that it's a USB 3 device, since it shows the message "This device can perform faster if connected to USB 3.0".

The drive does come with a cable with blue USB 3 connectors.

Anyone ever experienced such an issue before?

Answer:External 3.5" Buffalo USB 3.0 drive only connects at USB 2.0 mode

In general, the first thing to try with any USB device that doesn't behave correctly (or at all) is to open Device Manager, find the device and uninstall it. If you don't currently have the device connected you may need to select 'show hidden devices' in Device Manager's 'View' menu.

If an inappropriate driver had been loaded the first time it was connected it will continue to be used on all subsequent times. Uninstalling it will make windows 'forget' and choose the driver from scratch.

0 more replies
Relevance 56.99%

It works on Win 7 Pro Laptop and was working perfectly well on Won 10 until 2 days ago!
I have carried out the Device Manager uninstall if the portable devices and re-started my computer but this does not overcome the issue!
Any help on how I can resolve this problem?

Answer:Windows 10 does not recognise my Buffalo Ministation30 External HDrive

Sorry I overlooked the fact that it is recognised as a Device but it does not allow me to open it up!

5 more replies
Relevance 56.99%

Hi! So i bought a buffalo DVSM-PN58U2V DVD MULTI DRIVE. The package says that it installs automatically when connected into the computer, but when i plug it in, instead my computer recognises it as Optiarc DVD RW AD-7560S USB DEVICE, tries to install its drivers, and fails. I have a 32bit vista home premium.

Answer:Problem with Buffalo DVSM-PN58U2V external dvd-drive

Leave it connected and reboot. What happens?

11 more replies
Relevance 56.58%

what is the problem in my hard-disk sometime it's stop and start same time .

Answer:Sometime my hard-disk stop and start same time

That's very normal if one has 3rd party AV & AM & whatever else monitoring operations and security operations. How does tree-climbing via explorer [the file manager], copy and paste, etc., work in Safe Mode?

1 more replies
Relevance 56.58%

XP repeats hard disk error-checking on booting up. How do I stop it?

Answer:how to stop xp from repeating hard disk error

1. click Start / Run and type in regedit2. navigate to:HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\\BootExecute3. change the value of "BootExecute" from:autocheck autochk *to autocheck autochk *lsdelete4. click OK, close Regedit and restart your computerShould work for you.

3 more replies
Relevance 56.58%

I am runing windows 8 but hard disk continuously writing .why is continuously writing how to stop.

Answer:hard disk continuously to wirting how to stop please help m

As long as the system is booted, there will be hard drive activity. That's completely normal.Are you having some sort of problem?

8 more replies
Relevance 56.58%

Hello everyone,New to this forum, looking for help.My problem is if I leave my computer alone for awhile (30-45min.), not touching it, I get a Stop screen error with the following numbers.0x0000007E (0xC0000005, 0x804ECE73, 0xF78BEBBC, 0xF8BE8B8)I also checked my event viewer and under every time I got the error, there's multiple events stating "An error was detected on device \Device\Harddisk0\D during a paging operation."I have no idea what to do with this information or how to fix it at the moment so any help is appreciated.

Answer:Stop Screen Error - Hard Disk

Paging has to do, I believe, with what I think of as swapping, moving data from the disk drive to memory and back, in accordance with the needs of the system and the application(s) running.How long have you had the problem?  Was there some change to the system, i.e. new software installed, or anything to coincide with the problem?

5 more replies
Relevance 56.58%

Just a generic question...
Does anyone know if the Buffalo WLA2-G54C is compatible with non Buffalo wireless routers? I have a Dlink router (don't know the model off the top of my head) with various brands of client adaptors. I've heard good things about the WLA2-G54C for the repeater function.
I ask this because of this statement on their website:
Repeater/Bridge function of the WLA2-G54C is supported only with Buffalo bridges and routers. But, the device can communicate with other manufacturer's 802.11b and 802.11g client adapters either in bridge/repeat mode or as a stand alone access point.
Does this mean that it simply won't work with other brand routers or that they just won't support it. I would think the latter but was curious if anyone had any experience with it.
Thanks!
 

Answer:Solved: Buffalo WLA2-G54C compatible with non Buffalo router?

Eh, never mind. I just went ahead and bought a D-Link DWL-G710 Wireless 802.11g 54 Mbps Range Extender.

Thanks!
 

1 more replies
Relevance 56.17%

working on a dell n1050. the hard drive had physically failed. I installed a used one. formatted it thru cmd prmt. now I try to boot the pc from the install disk. it loads files, windows logo, then bsod. stop error: c000021a. I may need to verify the drive got formatted correctly, but otherwise, windows is not installed on this pc. now what?

Answer:stop error when boot from disk

Follow the steps here:
Clean Install Windows 7

9 more replies
Relevance 56.17%

I've never gotten this error when installing any version of Windows on a clean hard disk and I hope there is a solution as, otherwise, it's a bad board. This system originally came as a Dell factory-downgraded Windows XP installation (from Vista).

Here's the system.

I've swapped the hard disk, memory, DVD drive, video card, power supply and even tried installing XP, Vista and 7, all resulting in the same 07B stop error. There are no add-in cards aside from the video.

Any suggestions?
 

Answer:STOP 0x0000007B on installing XP on Clean Hard Disk

From what i read about that error its caused by a hard drive problem of some sort or if you are going from say vista back to xp the setting in the BIOS has to be either ATA,SATA, IDE, or compatability to install and run xp. AHCI is for vista and windows 7.
 

1 more replies
Relevance 56.17%

I have Windows 7 Ultimate 64 bit installed on my computer and it has worked fine for the last 3 months or so. However, for the last 3 or 4 days though the system won't stop accessing the hard drive. It is so bad that every minute or two the computer will freeze for half a second or so (especially noticeable if I am playing music or watching a DVD). This happens whether I am running a bunch of programs or nothing at all. CPU and memory usage appears to be normal. If I open the Resource Monitor the System appears to be reading on average 6 - 8 mln b/sec and writing about 5 - 7 mln b/sec for a total of about 12 - 15 mln b/sec. Most of the files with the heaviest usage are in C:\System Volume Information. Does anyone have any idea what could be causing this? The only things that have changed on the computer recently are a Java update and a Windows update where the following was installed:Security Update for Windows 7 for x64-based Systems (KB978601)Security Update for Windows 7 for x64-based Systems (KB979309)Security Update for Windows 7 for x64-based Systems (KB981332)Windows Malicious Software Removal Tool x64 - April 2010 (KB890830)Security Update for Windows 7 for x64-based Systems (KB980232)Update for Microsoft Office Outlook 2003 Junk Email Filter (KB981432)Security Update for Windows 7 for x64-based Systems (KB979683)Security Update for Microsoft Office Publisher 2003 (KB980469)That could be completely unrelated. I can't really pinpoint when the prob... Read more

Answer:Windows 7 won't stop reading/writing to hard disk

Can you post your system specs?

10 more replies
Relevance 56.17%

I used to get Blue screen of death

and it said STOP 0x0000C1F5
and i couldn't acces to my computer

Q: is it a problem with the ram or hard disk

Answer:Bluescreen STOP 0x0000C1F5 (is it a problem with the ram or hard disk)

Stop error message when you start a Windows Vista-based computer: "0x0000C1F5"

If it happens again, follow these instructions
Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 56.17%
Question: External Hard Disk

I have a LaCie 250gb External Drive - originally I had three partitions, one of 100+GB (G), one of 50+ (P)and one at 1gb (O). The latter proved to be too small and, using PartitionMagic 8 I resized it to 2gb (O) -taking the extra, I thought, from the 50+ (P)partition. However, in the process I seem to have 'lost' the largest partition (G) - containing my backup image. Anyone have an idea what happened? I have run Partitionmagic again - it lists the drive and unlike Partitions O and P which are marked as status 'None' the G Partition is marked 'active'.Please assist in unravelling this problem.

Answer:External Hard Disk

Below are the entries as they appear in Partitionmagic - hopefully this will give someone, better equipped than I, a clue as to what has happened.Lacie (*.) NTFS 187,46... 86,941.2 100,520.3 Active Primary(*.) Extended 51,011.1 51,011.1 0.0 none PrimaryLocal Disk(O:) NTFS 49,010.8 2,011.5 46,999.2 None LogicalLocal Disk(P:) NTFS 2000.2 1,003.4 996.9 None Logical

2 more replies
Relevance 56.17%
Question: external hard disk

Hi
I was thinking of going for an external second disk for my machine.
It woudl essentially serve as a backup drive.
I looked at some drives, and they are USB2, i was wondering if i installed windows xp on it, could i boot up from the external drive. Just in case, my old hard disk fell over, so i would still be in biz till i get a primary hard drive.

i was looking at manufacturers can you guys suggest a good make
came across these names:- freecom, lacie, hitachi,western digital, iomega, ximeta, archos

what do you guys think of this one
http://www.dabs.com/uk/channels/comp...quicklinx=3446
One Touch 160GB 7200rpm external HDD USB2/Firewire
125.99 inc VAT (107.23 ex VAT)

Answer:external hard disk

Rookie, i'm not positive about this but I think it can be done as long as your BIOS gives you that option. If you install it successfully and go into you BIOS menu, you could change the boot order so that it searches for your external hard drive first.

7 more replies
Relevance 56.17%
Question: External Hard Disk

Respected Members,

I have 1TB external back up hard disk...I have some important lecture videos of study material..but i am not able to see those folders when i attach disk to my laptop (all folders are invisible) but i can see those, when i attach it to my television...I dont know how this happened...plz,how can i can see those lectures on my laptop...and what is the precaution to be taken to avoild such problem in future.

Plz Help

Thank you.
 

Answer:External Hard Disk

Same problem as you, a year ago
http://www.tomshardware.com/answers/id-2947736/hard-drive-works-laptop.html

and here this year
http://ccm.net/forum/affich-31876-external-hd-no-longer-works-with-computer
 

1 more replies
Relevance 56.17%

well, my external hard disk was working just fine then it started showing as "local disk E" and i couldn't open it. I searched online for a solution and did the "chkdsk" thing and it worked again. few hours later the problem game back.. this time what i did before didn't solve it. it only made the contents of the hard disk appear but i couldn't use it .. so i copied some of the small files i needed from my 300 gb of data on it. now it's back to the "local disk e" thing and i can't even use cmd while the hard is connected. is there a way to solve it or at least copy my files from it?
Edit: now i can't even use cmd or disk management or my computer when the disk is connected

Answer:how to fix my external hard disk

Back up your personal data while you canDownload CrystalDiskInfo.V6.2.0 and run to check if your HD is any good.Try to run: chkdsk X: /r /f ======> X is the external drive letter. Will take a while to completeIf happens again then replace your HD.

3 more replies
Relevance 56.17%

for some reason when i try to access my external hd, it wont open and says its not formatted. Unfortunately i have data on there that id like to keep. is there a way to recover/undo(the problem) my HD?

it was NTFS
i have tried partition find and mount and it didn't work.
 

Answer:external Hard Disk help

it was NTFS? I doubt running check disk would be of help, or accessing via a Linux Live CD. Sounds like you deleted the partition. (Been there, done that ;-( )You could try fixmbr command from the recovery console..., it is on xp installation disks and can be installed as a boot option. There are also many freeware utilities you could try here, probably the best first step. http://www.majorgeeks.com/downloads38.html
 

6 more replies
Relevance 56.17%

I have WD 320 Gig External.

Windows detect the drive and can be seen on my computer but their is no size on the drive.

Check properties no size.

I try to open but windows hangs.

What could be the problem of this?

The USB cable? or my drive is damage?

I also try insert to different computer and all the USB port front or back same result.

Answer:WD External Hard disk Help

Did you initialize the drive?

This may not be the right instructions for your drive:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1018&p_

Because you did not offer more than it being a WD 320GB external.

WD FAQ:
http://wdc.custhelp.com/cgi-bin/wdc....p_new_search=1

3 more replies
Relevance 56.17%

Hi
I wanted to buy an external hard disk. My understand is Lacie, Freecom, Sony are good makes.

I looked in the sub 100 pound range, and came up with this list.
can some one suggest how i can narrow it down and select one hard disk, i am even more confused since ext. USB2 hard disks from the same make having quite a difference in their sizes are more or less for the same price.

can you suggest some features which an external hard disk should have?

Freecom Classic 80GB USB2 ext HDD
Freecom FHD-1 40 GB USB2
Western Digital Series II 80GB USB2 7200rpm 2MB cache
Iomega Desktop 80GB USB2
XIMETA Portable NetDisk 80GB USB2 2MB cache 7200rpm
Lacie P2 Model USB2 Mobile 40GB with USB2 Cables
Freecom FHD-2 PRO 20GB USB2 Ext HDD
Freecom Classic 120 GB USB2 ext HDD
Western Digital Series II 120GB USB2 7200rpm 2MB cache
Lacie P3 Model 160GB 7200rpm Ext USB2 Hard Drive inc Cbl
Iomega Desktop 120GB USB2 7200rpm
Freecom FHD-1 80 GB USB2
Iomega Host powered 40GB USB2

Answer:external USB hard disk

go with western digita; your best bet seagate and west make the best HDD's

4 more replies
Relevance 56.17%
Question: external hard disk

hello!my brother bought an 80Gb 2.5" external hard diskfor my pc. I transferred 74.Gb and have 37.9 Mb left. Butnext to total size it says 74.5Gb. Where has therest of the 5.5Gb gone??? Can someone explain?Thank you!!

Answer:external hard disk

It is because manufacturers use 1000 bytes for a KB when in fact it is 1024 bytes.So your 80GB was never 80GB80,000,000,000,000 /1024 /1024/ 1024 = 74.5 ish

2 more replies
Relevance 56.17%
Question: external hard disk

hello,

This is dheeraj kulal. i have a problem with external hard drive.

I copied all the data from my pc to an external hard drive(FAT 32). Then i formatted the PC hard disk and created 5 partition with 50GB each. Installed windows xp SP2.
External hard disk is of 500GB. Had nearly 250GB of data in it before copying data from my PC hard drive. After copying data from PC hard drive only 30GB of free space left in external hard disk.
Now the actual problem is the external hard not showing any of the files that i copied on to it. and few of the files already in it are missing too. But when check the property of external hard disk it shows only 30GB is free that means remaining are the data in it.

please help me,, files are very very very important for me... wt to do
 

Answer:external hard disk

Open Windows Explorer and go to Tools > Folder Options > View tab. Under 'Hidden files and folders', click 'Show hidden files...' and click OK.

See if tha helps
 

3 more replies
Relevance 56.17%
Question: External hard disk

Does anyone know of any external hard disk drives that run on linux?

Answer:External hard disk

New external hard drives use USB 2.0, Firewire, etc. These devices are immediately recognized by Windows XP and 2000 as soon as they're connected. Doesn't Linux support this? I thought it would since it uses the same kernel as XP and 2000. I don't use myself.

5 more replies
Relevance 56.17%

I have WD external hard drive. computer reads the hard disk after taking more than usual time. But when i copy the matter of my hard disk and try to paste it on my computer....It dose not work. The copy window shows 0 % . Want to extract data. Please help

More replies
Relevance 56.17%
Question: External hard disk

I have a Western Digital external hard disk on USB. The instructions say I should stop it when closing down pc but when I select it on remove hardware icon it just says 'this device cannot be stopped now, try later' even though I have no programs open that are using the disc. Will it cause damage if I leave it on and just close down. Have done this a couple of times but wonder if I will damage it.
 

Answer:External hard disk

8 more replies
Relevance 56.17%

Im realy fed up .......
I have wd 500gb elements (external)...driver shows on device manager and even shows on disk management as disk 1 with a deffirent letter as F I changed it as it was G but no data and cant access and doesn't show on my computer it happened diuring transferring data from my computer to the external hard drive but a suddenly shut down due to high tempretur on wd windows diagnostic tool shows as failer, lights on its working and its fan ....but.....no data I tride many ways to fix by installing and uninstalling changed the cable and cleand registrey by ccleaner but......pls give any seliution not to lose data ....over 270gb data...............

Answer:wd external hard disk

Please post a screenshot of Disk Management with your Western Digital external HDD plugged in.

Disk Management - Post a Screen Capture Image

Before taking the screenshot, please click on Show/Hide Console Tree, and Show/Hide Action Pane to hide those so that you get a full view.

5 more replies
Relevance 56.17%
Question: external hard disk

Hi all,Ive got a external hard disk 320gb plug abd play I plug into my usb port and windows says this is a high speed unit. I plug it into my high speed usb2 port and the computer will not reconise it.I have looked through previous threads and one says that any thing above,I think, 120gb windows will not reconise it.The unit is from PC world and the make is a maxtorCan anybody help ???????????Thanks

Answer:external hard disk

Hi, is it formatted NTFS?

6 more replies
Relevance 56.17%
Question: External Hard disk

Could anyone please help me to make ma own external hard disk without external power supply.

Because its difficult to bring the power adapter always with the drive

Answer:External Hard disk

sorry, but hard disks need some sort of power. they are mechanical and have motors.

maybe use a usb flash/thumb drive instead?

5 more replies
Relevance 56.17%
Question: external hard disk

Dear Specialists,
Could you please instruct me how to transfer live TV programs directly to my
external hard disk?
Thank you and with kind regards,
Beni Even

More replies
Relevance 56.17%

how to know when was my external hard disk was used or plugged to pc or laptop?
i mean putting monitoring on external hard disk.

for PC's there is a event viewer, what about external harddisk's?

Answer:how to know when was my external hard disk was used?

Hello and welcome to the sevens forum.

First I don't think you can tell when your external hard drive was used, unless you have something on your system that would tell you if it was used or messed with your kind a out of luck so to speak.

You can always set up a password on your external hard drive to lock people out.

4 more replies
Relevance 56.17%
Question: External Hard Disk

hey how are you guys doing? just have a quick question it the same as his problem and hope you guys can help me out. i got the found new hardware message but no appearance on my computer. i tried to do through disk and i still can't see it there either wha t do i do. i know wi have to format it an I know it will do it for me but, i dont see it in disk any suggestions?
i'll check in later on to see if u guys can help me
thanks alot
 

Answer:External Hard Disk

Even though it appears you're having the same problem, please start a new thread. It's very difficult to keep two problems straight and who's working on what in a single thread. Thanks for your cooperation.

Please post complete details on your environment and we'll be glad to help you out.

If it's just a formatting question, Control Panel, Administrative Tools, Computer Management, Disk Management, and you can partition and format the drive there.
 

1 more replies
Relevance 56.17%

well i am planning to buy an external hardisk but dunno which one to buy for....
well i must be very economical and must have value for money....
could u guys suggest some hard disk with space around 80-120gb or so.....
price factor not more than... 60-70$

well thats the cash i have for now.......


please answer to with ur best ability.......

Answer:which external hard disk to go for......?

Well i myself would buy a high capacity internal hard drive an then put it in a enclosure, external drives that have a decent storage space tend to get pricey. For instance &#163;45 for a 320gb drive an &#163;15 - &#163;20 for a enclosure makes a big difference in the price.

If you where just saving sage details on there or text files ect a smaller drive would be fine, but programs, ISO files, films ect take up a lot of space.

4 more replies