Computer Support Forum

2103: Detection error on HDD0 (Main HDD)

Question: 2103: Detection error on HDD0 (Main HDD)

Hi, I hope some one can help me. I have a P50 In thise I have the OS on a M2 disk. I have on other M2 disk both are working good. When I tryed to mount a 2.5" ssd Kongston 256 gb I got the message "2100: Detection error on HDD0 (Main HDD)"If I connect the disk to a ekstern reader I finde it but not when connected internaly in PC. BR

More replies
Relevance 100%
Preferred Solution: 2103: Detection error on HDD0 (Main HDD)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 82.65%

Whenever I try to restart my ThinkPad T440s, it takes a very long time to get past the "ThinkPad" screen.  If I hard reboot it while it's stuck here (press and hold the power key, then turn it back on), it loads just fine.  However, if I let it keep going it beeps loudly and angrily and gives me the 2100: Detection error on HDDO (Main HDD) on a black screen with only "Press Esc to continue".  When I press Esc it loads the boot screen, but without access to my hard drive.  If I hard reboot it again, it starts just fine. Any ideas on why it would be doing this, or what I could do to fix it?  It looks like it was a common problem a few years ago, but this is new to me and it doesn't really look like there was a fix back then.  Hoping there's better news now? Any help is appreciated!

More replies
Relevance 82.65%

 I have a Lenovo E550 with a HDD and i5 processor. It was bought about two years ago and it works fine until today. I found that the computer cannot start normally and "2100: Detection error on HDD0 (Main HDD)" just showed up after a few seconds. I did the lenovo diagnostic test but all test passed. I cannot find any solution of this problem online. please help.

Answer:2100: Detection error on HDD0 (Main HDD)

It usually means the HDD is dying.  Do you have a backup?

5 more replies
Relevance 82.65%

Hi, I bought Thinkpad Yoga last year. The Yoga originally came with 512 GB HDD plus 16GB SanDisk SSD. A couple of days ago, I replaced the original HDD with Crucial BX100 SSD (500GB). Since then, I have the 2100 error. It goes like this. When I boot the computer by pressing the power button on the side of the computer, it boots well. About 30 minues later, the computer suddenly loses connection with the newly installed SSD, and shows 2100 error message on black screen. When I press any key (as instructed on the screen), the computer shows Boot Menu. But the Boot Menu lists only ATA HDD1: SANDisk SSD U110 16GB.  When I reinstalled the original HDD, 2100 error didn't happen. But I don't want to use HDD anymore for speed issue.  If anyone solved a similar problem, please help me.  Thanks in advance.- H_Kim.  

Answer:2100: Detection error on HDD0 (Main HDD)

This is not just that one particular comptuer type or HDD type. I have two different Edge Series comptuers with standard HDD that are consistantly getting the 2100 Connection Error and Missing Operating System errors at bootup. Have to boot a couple of times to get the OS to load properly.

2 more replies
Relevance 82.65%

Hi all,i am discovering the same problem as most people here.I have an expensive Yoga Thinkpad 12, about 2000,= euro's in januari 2014, warranty endded in januari 2016, my extra 3rd yr warranty i have bought is missing by Lenovo (i forgot the registration but in the mean time i have send the supportdesk from Lenovo al the documents including pincode from the card) and now they say de extra warranty was canceled and / or credited. Nothing of that. poor service for such a great brand.But now my problem. about 3 weeks ago all of a sudden my SSD stopped and generated this 2100 error. It's a Samsung M27TD256 from the same series as Lenovo mentioned. Because of Lenovo's attitude of not servicing (Oh yes the supportdesk guy said SSD Failure, needs to be replaced for new) i went on to the Internet how to open the machine and without any damage that was no problem. I have a computer repaircentre myself and i tried to replace te Samsung SSD with: a 120 Gb Kingston SSD / a 240 Gb Kingston Fury SSD / an Intel 120 Gb SSD. All brand new, right out of stock, non will work !!!So i took the old original SSD, tested it in another PC and it works perfectly, i could install Win 10 and boot from it.I put it bak in the Yoga... nothing. the 2100 error again.So i thought it would be the mailboard or controller but curious a i am, i took an old 250 Gb harddrive, no SSD and guess what....... The Yoga booted up without any error messages, external DVD connected and i could install an OS (whatever, Win8... Read more

Answer:2100: Detection error on HDD0 (Main HDD) Where is ...

I had the same problem on a S230U Lenovo Twist. I replaced the MB and the HDD and the HD connector/controller and had the same problem. By accident, as a result of testing I installed the HD without the bracket that holds it in place. Voila it has not failed once since then. It has been running flawlessly for 2 months or more now. I havent bothered to reinstall the bracket since it is running great. There is almost no extra room in the HD compartment so I am not worried about it flopping around. Only thing I can figure is there is some kind of static buildup with the bracket installed. I tried bending the bracket to see if I could make it contact the MB to discarge static if that was the case. No good. Removed the bracket, and it worked immediately. I don't know if that will work for you but it worked for me.

1 more replies
Relevance 82.65%

I have a Lenovo ThinkPad Yoga, with a 256GB SSD and an i5 processor. I received it on April 29. After two weeks of normal use, it crashed and gave this error:?2100: Detection error on HDD0 (Main HDD)?I could not get it to boot. I took it to a computer repair shop and they (Lenovo warrantee) replaced the SSD. It worked for about a week, then crashed again, same error. My tech guy said that it might be a bad board, frying hard drives; but Lenovo insisted on replacing the hard drive again. Ten days later, same crash. I unplugged it and put it on a shelf for the weekend, intending to take it back to the shop. Monday morning I plugged it in and it started up normally. It has been working normally for three days, but I am worried about getting the same error and crash. Can you tell me what might be happening, and if there is anything I can do to prevent a recurrence? This seems to be a common problem across many machine models, but I haven't found any solutions to it.  










Solved!
Go to Solution.

Answer:2100: Detection error on HDD0 (Main HDD)

The connector or the data controller board could be shortcurcuiting the ssd.

9 more replies
Relevance 81.78%

Hello,I have SSD installed into mSATA slot and 9mm HDD installed into ultrabay slot with HDD adapter. But I REMOVED the original 7mm HDD and now there is nothing in regular hard drive slot. After restart, there is a couple of beeps and error message " 2100: Detection error on HDD0 (Main HDD) press ESC to continue", and booting proceeds only after I press ESC. Before that there was no such error. Laptop still boots well from SSD and HDD in ultrabay works well, but this error during startup is annoying at least.Laptop Thinkpad T430s. Is there any way to disable SATA port that corresponds to HDD0 (may be in BIOS?) or any other way to get rid of the error?The HDD in Ultrabay slot is 9mm, so I think there is no way to fit it into main HDD slot.Thanks!

More replies
Relevance 81.78%

Hi,I got T450s with 500GB HDD which I replaced with 500GB SSD Crucial MX200.After installing Windows 8.1 Pro, turning on bitlocker and restarting machine, I saw black screen with white text: 2100: Detection error on HDD0 (Main HDD) usually if I power off laptop and turn it on again, problem gets solved and I can start Windows, but then after restarting computer again the error is usually there again... I've noticed that if I turn off the bitlocker, the problem doesn't appear (at least I wasn't able to encounter it without bitlocker). I saw threads about similar problems with this and other thinkpad models as well as crucial and samsung SSDs, but none was actually reporting that it may be connected with bitlocker functionality... (I can't be 100% sure it is, but so far it looks like it). any idea how I can fix it so that it works also when bitlocker is enabled? Thanks!

Answer:T450s: 2100: Detection error on HDD0 (Main HDD)

I have exactly the same problem too with a T550 and a 1TB Crucial MX200. Did you ever find a solution? I'm tempted to return the MX200 and try a Samsung 850 EVO instead.

1 more replies
Relevance 81.78%

Hello. I got this error each time after hard reset, or any non-standard unexpected poweroff."2100: Detection error on HDD0 (Main HDD)". I found workaround how to boot: each time in this situation i press F10 to load Diagnostic Utility at boot time, then see error message, press ESC to continue booting into diagnostic utility, and here I already see my hard drive. So just do nothing, quit from utility to restart laptop. And now it see hard drive and boot as usual. BTW, if I boot from USB flash drive, and do hard reset, it throw same error but for m2 SDD instead of sata HDD0. I have stock WDC WD10JPVX-08JC3T5 hard disk and stock SanDisk SSD U110 16GB.Model of laptop Lenovo ThinkPad T440p 20AN0030RT. BIOS GLET83WW. All with lastest firmware (respectively 05.01A05 and U21B001). Latest updated BIOS (2.37). Please, suggest any appropriate solution, because I can't figure out this by googling by myself.

More replies
Relevance 81.78%

Anyone experiencing this? I see a lot of older posts referring to this error. This is on a brand new machine.  Wondering if this is something that needs to be repaired or just a bug which could be fixed by an upcoming Bios update.  Happens infrequently but sometimes I will come back to the laptop after walking away, and it will be at this error. 

Answer:T450s: 2100: Detection error on HDD0 (Main HDD)

Do you have an SSD?

6 more replies
Relevance 81.78%

Ok, so my wife shot herself in the foot and dropped, then fell on her W520.  Now, it tries to come up butget's the 2100 message.  I can get to the "boot menu" with the following two options:ATAPI CD0: HL-DT-STDVDRAM GT33NPCI LAN: IBA GE Slot 00C8 v1366Hitting enter with the ATAPC line highlighted   = no actionHitting enter with the PCI LAN line highlighted =Initializing INTEL boot agent GE 1.3.66 then:PXE-E61 Media test failure - check cablePXE-M0F Exitting Intel Boot Manager The DIAGNOSTICS Splash Screen shows this: Phoenix SecureCore Tiano(TM) for ThinkPadBuild Time: 07/26/2013CPU = Intel(r) Core(TM) i7-2720QM CPU @ 2.2GHz8192 MB System RAM Passed256 KB L2 CacheSystem BIOS shadowedVideo BIOS shadowedBIOS Version: 8BET62WW I've unplugged the power and pulled the battery. Re-seated both the RAM and Harddrive. No affect.  Hitting F1, F8 and F12 and thinkvantage buttons do nothing on rebooting.  Opinions on if it's worth fixing? 













Solved!

Go to Solution.

Answer:2100: Detection error on HDD0 (Main HDD) Can't get anywhere - HDD or System?

03bluecoupe wrote:
Ok, so my wife shot herself in the foot and dropped, then fell on her W520.  Now, it tries to come up but
get's the 2100 message.  I can get to the "boot menu" with the following two options:
ATAPI CD0: HL-DT-STDVDRAM GT33NPCI LAN: IBA GE Slot 00C8 v1366Hitting enter with the ATAPC line highlighted   = no actionHitting enter with the PCI LAN line highlighted =Initializing INTEL boot agent GE 1.3.66 then:PXE-E61 Media test failure - check cablePXE-M0F Exitting Intel Boot Manager
 
The DIAGNOSTICS Splash Screen shows this:
Phoenix SecureCore Tiano(TM) for ThinkPadBuild Time: 07/26/2013CPU = Intel(r) Core(TM) i7-2720QM CPU @ 2.2GHz8192 MB System RAM Passed256 KB L2 CacheSystem BIOS shadowedVideo BIOS shadowedBIOS Version: 8BET62WW
 
I've unplugged the power and pulled the battery. Re-seated both the RAM and Harddrive. No affect. 
Hitting F1, F8 and F12 and thinkvantage buttons do nothing on rebooting.
 
Opinions on if it's worth fixing? 

Geez
 
I do hope she feels better.

9 more replies
Relevance 81.78%

Hello everybody, I know that there are some other posts with this error message. But they all appear on other devices and none of them has a solution which is working for me. I got a T430s back from one of our users which showed this error (mentioned in subject) when booting. I had no no chance to enter BIOS too. 1. I copied all partitions to another SSD and replaced it => the error came up again after few days=> so I thought it must be an hardware issue concerning the internal SATA-connector2. I put the SSD in a completely new device and ordered a replacement of the mainboard because there was waranty left on the older device.3. Yesterday they came and replaced the mainboard of the older device.4. Today the user came back with the same error on the new device with the new SSD In every case it helps to remove the SSD one time and insert it again - then the SSD is detected correctly - until the error appears again after few days of usage. The only thing I did not try until now is to insert the SSD in the old device with the new mainboard. Before I forget this: BIOS is Ver. 2.52 (I see there is 2.54 available since few days, but change log does not say something important - gonna check that later and post it) Any ideas? Thx Martin

Answer:T430s - 2100: Detection error on HDD0 (Main HDD)

check with the OEM of the SSD drive. You did not mention the Make/model of the SSD. Maybe there is a firmware update for the SSD drive. Especially since the 430 has SATA3 interface.If its not hardware you'd need to assess what you're doing software wise in the "copied all partitions ot another SSD..." I have found out cloning can cause problems and partitions become misaligned. When I went ahead to fix the misalignment with Mini partition Manager it corrupted the registry and so other files. Various applications cannot be updated or uninstalled. I have to reimage it and not clone from the source to get it right.A quick test is to just to a base install on one of the SSD's (EG Windows 7) after purging all the partitions. Letting the OS configure, partition & format the NTFS drive. If it works after that then its not the hardware and a software issue.My thoughts anyway.





T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

9 more replies
Relevance 81.78%

Hi all,I replaced original HDD on SSD 250 GB and formatted built-in Toshiba SSD-disk 20 GB . On 250 GB SSD installed Windows 8. And after turn on notebook I get "2100: Detection error on HDD0 (Main HDD). Press Esc to continue". If press "Esc" then there is boot menu, contain 2 point: ATA HDD2 Toshiba and PCI LAN. But after ALT+CTRL+DEL begins normal loading Windows 8.Any ideas why?

Answer:X240 2100: Detection error on HDD0 (Main HDD)

Hi - I've seen this so many times I lost track. I have about 100 X240 with the Samsung 256GB SSD and 100 T440 with the same drives. Periodically they crash and boot to the same error: 2100: Detection error on HDD0. If you reboot a few times it will come back. I suggest dowloading the SSD firwmare: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034646 If that doesn't work, call it to Lenovo and have them send you a warranty replacement. 

9 more replies
Relevance 81.78%

I found some similar threads (such as this one) but none with an actual diagnosis and resolution. I have a Thinkpad T520 with a 1TB Samsung 840 EVO (an SSD like all the other reports of this problem). It has worked fine for a month then suddenly I am seeing this error on boot.I have the latest BIOS and drive firmware updates as of the time of this writing. The error appears to be "bogus" in that booting from a Linux CD, and from a Windows Recovery CD, the drive is seen just fine, with no errors reported, despite the "detection error" reported by the BIOS. SMART status as reported by Linux shows the drive to be in excellent condition with no error or warning flags: SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 658
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 145
177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 1
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Alway... Read more

More replies
Relevance 80.91%

Hi Lenovo Community,  around April/May I bought a T470 and since then my Notebook is crashing from time to time out of nothing with the apparently famous "2100: Detection error on HDD0 (Main HDD)" error.First this error screen shows up:     First error messageAnd it is shortly followed up by this one:Second error messageBefore starting this thread I had a look into the community and the older posts. This seems to be a problem which comes up often with all kind of Lenovo Notebooks (ThinkPads and also IdeaPads) however there was no thread for the T470 model yet and the suggested solutions (mostly only to update the drivers) didn't really solve my problem...!All my drivers are regularly updated via Lenovo Companion and yet the problem still comes out of nothing...Does anyone have an idea?Thank you.Best Regards,GT500M

More replies
Relevance 80.91%

Hello, I recently upgraded my hard drive from 128 to 256 sdd without migrating my files to the new hard drive I thought I could reinstall everything from scratch. But when I installed the new sdd I first got a Hdd0 error and then send to the boot menu. The boot menu didn't have anything to select, so I thought of putting back the old hard drive to return it back as it was. After doing that I still get the same screen error. What can I do to fix this or can it even be fix?
 
 
Mod edit:  Added Model to Subject for Improved Visibility.

Answer:Yoga S1 2100: Detection error on HDD0 (Main HDD) after installing sdd

Forgot to mention that I owen a thinkpad yoga s1.

1 more replies
Relevance 80.04%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.
 

Answer:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS
 

2 more replies
Relevance 80.04%

My laptop is T430 of Lenovo. I have two drives installed on my computer, one is SSD (128 G, PLEXTOR), another is HDD (500 G, Samsung). Now I have encountered a serious issue that I could not find the HDD in my Windows 10. Almost two weeks ago, I found my laptop crash frequently. I think there is an extreme incompatibility between the Windows 10 and SSD. I even reinstalled my OS for several times. But it still crashed. Even I opened a simple word file, it does not respond. Two days ago, the issue got even more serious. When I boot my system, I found a problem with "2100: Detection error on HDD0 (Main HDD)". It suggests me to press the "ESC" button to enter into the OS. However, I could not find my HDD on my computer anymore. I have some paramount important data and files in this drive.  Could some friends provide some meaningful suggestions of recovering data and files for me, please?  I'm very anxious. Thank you very much!

More replies
Relevance 80.04%

Hi, I used an SDD Crucial m500 480 Gb in my Thinkpad x201i for about a month.It was configured in 'Self-Encrypting Drive' (SED) so my Thinkpad asked me a passphrase at boot.It worked great, never got a problem with it. Last week, I bought a t440s.I decided to move my SSD into that t440s. At first, I always got the same error message "2100: Detection error on HDD0 (Main HDD)" and wasn?t able to boot or install the OS.I removed the SED passphrase (because I wasn?t sure if encryption was involved with the TPM chip or not) but that didn?t help. I flashed the UEFI / bios to the latest version (2.17 at that time) without any more luck.Then I updated the SSD Crucial m500 firmware to MU02 to MU03.One of the fixes of that update is "Fix for potential Haswell compatibility issue (latest Intel platform)" which could only help.And it helped : the drive was then recognized and I installed the Operating System after setting again a SED passphrase.It worked great for several reboots but, this morning, a "hot reboot" (restart from the Operating System without power off), I?ve got the 2100 message error again...I powered the system off, remove the power cord for several second then powered on and it worked but It keep me worried....The problem is not permanent but It could be very bad to not be able to boot my laptop !I thought I fixed the problem permanently with that firmware update but it seems not... Do someone has any idea ?Is that SSD a model to avoid in... Read more

Answer:SSD Crucial m500 + T440s = 2100: Detection error on HDD0 (Main HDD)

Hi lovecraft,thanks for posting and welcome to the community. Looking at your case could you possibly try the update below.http://support.lenovo.com/en_MY/research/hints-or-tips/detail.page?DocID=HT076644Hope this helps and please do post back your results.Regards

9 more replies
Relevance 79.46%

When I try to boot my W520, I get a BIOS boot up error : "2100: Detection Error on HDD0 (Main HDD)". I am using PNY XLR8 240GB SSD. It worked fine for a month. I also have PGP installed and whole disc encrypted. I installed an update of Intel Management Engine Firmware and Intel Chipset, both are the latest from lenovo site because I was experiencing expreme slowness from my harddrive. Programs would freeze. Webpages would take forever to load..The next time I rebooted, I got the error. If I leave the SSD out for a bit, and put the SSD back in, the disk will work for some time... but on next reboot, it is again detection error.. TRIM is enabled on my system. I am not sure how the SSD died so quickly. I am back to using my HDD but I am not happy. I want a solution... is this a intel chipset issue? Intel IMEI issue? Is  the PNY SSD just a bad model? I've googled plenty and dont really see a solution. Sometimes there is a firmware update.. PNY has no firmware updates for my drive.. I don't see anybody else using PNY on their W520, but plenty of people are experiencing Error 2100 with SSD on their W520.. somethings fishy.. help please! thanks in advance !

Answer:W520: PNY XLR8 240GB SSD with error "2100: Detection Error on HDD0 (Main HDD)"

Hello,
I don't have a ThinkPad W520 or a PNY SSD, but could it be simply that the SSD is coming loose inside the ThinkPad's chassis?  I suppose this could occur if a 7mm high SSD was inserted into a 9.5mm high 2.5" drive bay with a ~2mm spacer to "pad" the unused vertical space.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 79.46%

I've had my T430 for about a year, and other than two Corsair RAM sticks failing my computer has been running smoothly. Last night, my computer suddenly froze up and now it won't recognize my SSD. I'm currently using my stock HDD, but now I can't access any of the data on my SSD. I've tried running the SSD firmware update from the Lenovo site, but it wouldn't show my SSD under the memory devices (I'm not sure if this particular SSD is supported by the firmware update either). I don't think lenovo customer support would help in this situation, since my stock HDD runs fine and I didn't buy the SSD from them, so any help would be appreciated.

Answer:T430 "2100: Detection error on HDD0 (Main HDD)" Error on Samsung 830

I have the same problem that I ran into for no reason.  Does anyone have a solution for this?  Luckily I was able to login to safemode once and did my data back up after I could not login to safe mode.  The moment I connect to net work this problem happens.  On a side note I bought this T430S on ebay 3 months back with 16GB Memory, 500GB SSD which was running pretty good.

1 more replies
Relevance 79.46%

Hi, I have a month old T440s. It has the original 256GB SSD drive (didn't open\replace anything).After uninstalling some antivirus software win8 had problems booting. To make a long story short, I tried different things to fix the MBR and eventually got to the point of trying to do a full factory restore, which didn't work (it couldn't find the recovery partition).When I boot up now, I get the "2100: Detection Error on HDD0 (Main HDD)" error.Aside from trying to restore using Lenovo CD (shipped to me, will be here in a couple of days), what else cn be done and what caused this ordeal? I don't mind about the data on the SSD, I just really need my laptop functioning ASAP. Thanks for any advise you may have!

Answer:Brand new T440s (original 256GB SSD) - Error 2100: Detection Error on HDD0 (Main HDD)

Hi,check out the disk drive model. If that's a Samsung SSD PM841, refer the page below regarding firmware update affected models:http://support.lenovo.com/us/en/documents/ht082504

7 more replies
Relevance 79.46%

Hello! First post on this forum but been browsing for some time. My machine: ThinkPad S430, type-model: 3364-5HG, Win 7 x64, 500 GB HGST HDD. My problem is notably similiar to this one: https://support.lenovo.com/us/en/documents/ht082504.The problem occurs on very irregular basis, at times a couple of times a day but other times it goes weeks between the interrupts. It starts with some sort of short mechanical sound from the HDD, similar to the one when you turn the laptop of by pressing and holding the power button (only do this if I absolutely have to, it feels like choking someone with a pillow). After the sound, the screen freezes for a couple of seconds before the short bluescreen mentioned in the link occurs. The rest is as follows by the link above. Basically the only difference is the HDD brand (HGST in my S430 and Samsung in the link). After reboot (with power button during the automated reboot after bluescreen when the error code occurs), the laptop works fine.  It's getting quite annoying when this happens and also the suspension of not knowing when it will happen next is not good for my heart. What to do? Thanks in advance! Regards,Nicholas

More replies
Relevance 79.17%

Sometimes i get this error when i start my Thinkpad T530 (Cold Boot and also with a reboot). Could Someone give me advise on this all update and firmware updates are installed also on my SSD drive
Manufactor: Mushkin
Type: Chronos Deluxe       
Model : MKNSSDCR480GB-DXFirmware : 504ABBF0Serial Number : MKN1243A0000135952
 
Link to image
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

Answer:T530 2100: Detection error on HDD0 (Main HDD) SSD Mushkin Chronos Deluxe

Hi Michael222,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing an issue with HDD detection on your ThinkPad T530.
 

Have you checked updating system BIOS?
Is the system is having both HDD and SSD?
Check with reseating the drives.

Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 93.48%

Hi there,I bought a x1 carbon 3rd gen and it has been working with no issues until today. I bought the 512gb ssd option. Suddenly, I am getting the mentioned error, 2103 detection error on ssd0 (m.2), each time I power on the laptop, with no possibility of booting into windows, etc.... Is this a failure in the ssd? Any suggestions?Any help would be really appreciated.Thanks.











Solved!
Go to Solution.

Answer:2103 detection error on ssd0 (m.2)

HiWhat's the SSD model?

9 more replies
Relevance 93.48%

I have a X1C 3rd (2015) .it runs a win10 and works well,several days ago  the OS auto update for something what I really don't notice the detail,and the laptop cannot boot the OSanymore.when it starts ,it'll show 2103 detection error on ssd0 (m.2) on the lcdI run the diagnostic,all the test can pass.But I still can't find the ssd even in a PE recover modewhat can I do ,any can show some help pls. PS.the SSD is PM851 256GB Samsung?

More replies
Relevance 91.43%

I have a X1C 3rd (2015). it runs a win10 Pro 64bit and works well.I bought a SSD - Samsung SSD 950 Pro M.2 512GBand I tried to replace with it from thr original SSD - SAMSUNG?MZHPV256HDGL-00000?SM951 AHCI?M.2 SSD 256GBOnce I install the new SSD, everytime when it boot it up, a message showed;" 2103: detection error on ssd0 (m.2)  Press ESC to continue. "It seems SSD detection failed.Then I tried to update X1's firm to the latest version 1.16.But the situation had not been changed.  Still 2103 error showed.As I saw someone's trial such as "Disabel the battery, charger and wait a several minutes and then tried, but no change...Help me to get this situation out....  

More replies
Relevance 90.61%

I'd lost my power cord and haven't been using my E220s for few weeks.When I finally bought a power cord, the screen only shows:Thermal sensing error.2103: detection error on HDD2 (mini sata).And it turns on.How do i fix it?

More replies
Relevance 87.33%

Hi,
I have Lenovo laptop which getting 2100:Detection error on HDD0. What does it means? I couldn't get into windows.

Answer:2100: Detection error on HDD0

seems to be a common problem with lennovo laptops if it is a thinkpad yoga popping over to lennovo support and downloading chipset and IRST drivers then updating may be the way forward. install chipset 1st then IRST
click here click here
Drivers

3 more replies
Relevance 87.33%

Hey! I have a Lenovo Thinpad R61i laptop and when I turn it on I receive 2100: Detection error on HDD0 (03). I reseted the BIOS and I've extracted the HDD and tossed it again. No solution! I need to power off it 2 times before it enter the Windows. Please help me!













Solved!

Go to Solution.

Answer:2100: Detection error on HDD0 (03)

Hi NRCS,Warm Greetings & welcome to Lenovo Community, happy to have you here.As I understand that you are facing issue HDD 2100: Detection error on HDD0 (03) in your ThinkPad R61i.
As you have said system is booting in Windows at that time you can try to run Lenovo Diagnostics for complete checkup of your hardware components & update us how it goes.
I hope the above information helped you.
Please feel free to post in Lenovo Community Forums if you have any further queries!
 
Regards,Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

9 more replies
Relevance 86.1%

hello.  I have a E540 laptop with a ssd.  Recently I have gotten this error when starting up my computer : 2100 detection error on hdd0.  To get past it I have turn off and on the laptop multiple times.  Does anyone have a fix?

More replies
Relevance 86.1%

hello.  I have a E540 laptop with a ssd.  Recently I have gotten this error when starting up my computer : 2100 detection error on hdd0.  To get past it I have turn off and on the laptop multiple times.  Does anyone have a fix?

More replies
Relevance 86.1%

Hi,  I need to upgrade the firmware of the SSD and when I put the SSD in Lenovo laptops in ROM mode. I get the following error "2100 Detection Error on HDD0" as disk can't be read.  After this it asks me to press "ESC" to continue. I want it to go to PXE boot when the DISK failure is found as I push OS in the RAM and then treat this disk as secondry (SSD) and then recover it.  My boot order is set as :: SSDPXE  Can some please help how can I avoid getting in the Press ESC to continue and make machine reboot automatically? By the way its 440P lenovo machine I tried this stuff on. Any help is appreciated. Thanks-Vishal

More replies
Relevance 86.1%

hello.  I have a E540 laptop with a ssd.  Recently I have gotten this error when starting up my computer : 2100 detection error on hdd0.  To get past it I have turn off and on the laptop multiple times.  Does anyone have a fix?

More replies
Relevance 86.1%

when this error pops up the only thing that is noted as [failure] is my media how do i solve this problem 

Answer:2100 detection error on HDD0 [mainhdd]

Hello ryuyankataso, welcome to the community,
 
could you maybe post which Lenovo notebook you have as this will help members to assist you best.  Quite often this error wil indicate that a hard drive has failed but can also mean that it has jogged loose and just needs removing and replacing.

2 more replies
Relevance 85.28%

I have a Thinkpad Yoga which today was turned on while I was away (i.e. computer was not in use). When returning back the screen said "2100: Detection error on HDD0 (Main HDD)". Windows must have crashed (probably just another one of those faulty Lenovo drivers) and then the system couldn't boot up.
Everything seems alright after a hard reboot but I'm afraid my SSD drive has gone bad.
 
Link to image
 
Found a support document of the error on Thinkpads with Samsung SSD, but mine have a LiteOn. Can anyone help me find out why this happened and if anything is wrong with my SSD?
 
Thanks,
// Måns
 
The support document I'm talking about: http://support.lenovo.com/us/en/documents/ht082504
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

Answer:2100: Detection error on HDD0 (Thinkpad Yoga)

I have the same problem on a Lenovo Thinkpad, it does it once a day One way to fix it: Once it boot up wrong, press esc and the in the menu select the "Lenovo diagnosis" or something like this, once you see your 2 drives, you can reboot and it will work.When I launched a usb key while having the 2100 error, only the liteon ssd was detected... Might be a Hard Drive problem? (my thinkpad is only 3 months old) I tried updating my Bios, and I reinstalled windows. No differrences, still having a bug once every 2 or 3 reboot I'm trying to fix it soon and if no way, i'm going to make the warranty work(Sorry for my english, not my native language)

8 more replies
Relevance 85.28%

Hi, last week I received my new T470; everything fine until yesterday when, after enabling virtualization support when running on battery, I received the infamous "2100: Detection error on HDD0". Power off and on again and the system booted correctly. After a couple of hours I left the pc for ten minutes or so and I wasn't able to wake it up: power light was on but tapping on keys or touchpad didn't wake the laptop up. Power off and a second "2100"; this time turning the pc off and on didn't do the trick... I thought the issue could be related to the virtualization settings I had enabled, so I entered the BIOS and disabled virtualization. Bingo, the pc booted! So, just to be sure that it was the root cause of the problem, I re-enabled it.. but everything went fine!  From then I'm not able to reproduce the issue anymore, but my OCD (and my colleagues, that kept saying I should have bought a Mac) is telling me that I have to fix this. My hard disk is a Toshiba SSD: Model Number: THNSF5256GPUK TOSHIBAFirmware Version: 51025KLA Googling these codes brought me here: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/ThinkPad-X270-PCIe-SSD-NVMe-refusing-to-wake-... The fact that my laptop wasn't waking up makes me think the problems could be related; I've seen a lot of posts of people with the same issue, some suggest checking HD connectors, other to change the HD model. Some people say that when the error oc... Read more

Answer:Brand new T470: "2100: Detection error on HDD0"

This kind of problem is hard to diagnose, but if it were my machine, I would update the BIOS to the latest version and install the newest power management drivers.  I would then boot into the BIOS and load setup defaults.  I would use the machine normally and see if it is stable.

2 more replies
Relevance 84.46%

On my W520 I am running a Crucial M4 512GB for the last 4 month. It was updated with FW 010G 10 days ago.When it stopped working with "2100: Detection Error on HDD0" I took the M4 out. It would not become active on  any other  port.While I tried to rebuild the system on another HDD-drive I left it in a //FREECOM HDD dock powered on, but not connected.When I finished the rebuild about 2 hours later I plugged the dock into the usb of another machine and it got recognized.So I took it back to the W520.It is now working in the W520 as before for about 2 * 10hrs without any problems. Can anyone explain what happened please?





Lenovo ThinkPad W520 4284-4MG, UEFI 1.39, Intel Core i7-2860QM 2.5GHz, Kingston PNP 24GB (2x4+2x8GB) 1600MHz RAM, Crucial m4 070H 512GB SSD, Intel 6300 AGN, ThinkPlus 3G Ericsson F5521qw Broadband, Lenovo TP Port Mini Dock Plus Series 3, Windows 7 Professional 64bit









Solved!

Go to Solution.

Answer:W520 + Crucial M4 512GB 2100:Detection Error on HDD0

Edit:  You have the latest firmware, didnt read

8 more replies
Relevance 84.46%

After about 18 months of use, I am repeadedly receiving the following errors on my Thinkpad Twist S230U (Model #3347CTO): 2100: Detection error on HDD0 (Main HDD)Press Esc to continue. (On Startup) or   Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (0% complete)If you'd like to know more you can search online later for this error: CRITICAL_PROCESS_DIED (Windows 8 BSOD when I am in Windows) I am periodically able to login, so on my last login I did a complete refresh ran all the disk utility options, and did a complete refresh.  I just finished installing the 150 or so updates, did another run through the disk utility applications, and it is still doing it.   Any thoughts? I'm worried that it will get to the point where it won't startup again (and it is a huge pain when I am working and it goes BSOD on me).  There was nothing installed or any physical shock to the machine that would have led to this happening when it did.

Answer:2100: Detection error on HDD0 and BSOD on Thinkpad Twist

Hi Glennschatz,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with HDD drive on ThinkPad Twist S230u.
 
I suggest you to check with Lenovo diagnose tool, through which we can identify the exact error from that.
 
Below is the link to enter the downloads page and install Diagnose application and check accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
 
http://support.lenovo.com/en_US/downloads/default.page#
 
Hope this helps. Do post back if issue persists!
 
Best regards.

Hemanth Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

8 more replies
Relevance 84.46%

Hello everyone. I'm having random problems with my new disk Evo 500 Samsung 840 Gb The error I get is, "2100: Error detection on hdd0".I searched the forum responses to this error and can not find a solution to the problem. Apparently this error is due to the compatibility dell disk controller which uses "Samsung 3-core MEX Controller" with the team (W520 82844DG). I do not know if this is true and if you have easy solutions.Some of you can provide me a solution or a hint to solve this problem Thanks.

Answer:W520 samsung ssd 840 evo 500Gb: 2100 Detection error hdd0

Have you been able to figure this out.  I'm looking to upgrade either to the Samsung SSD 840 Evo or the Crucial M500.  Please let me know if the Evo ended up working well for you.

3 more replies
Relevance 84.46%

I got the dreaded 2100 error a few days ago on my X230 with a Samsung SSD.While I managed to solve it in a somewhat unexpected way, I wanted to document the process here as I am almost certain it was the result of a bug in the laptop firmware/BIOS. If any Lenovo representatives are reading along I'd appreciate your comments.Long story short: Power on laptop, observe 2100 error. Reboot, press Enter to interrupt start-up, then F12 to select boot device. Hard drive appears in list, despite it not being detected a few seconds earlier. Sigh of relief. Select hard drive, boot up. Problem solved.Details: System configuration is X230 ThinkPad (BIOS version 2.57) with a Samsung 840 EVO SSD (model MZ-7TE1T0BW), Windows 8.1. Before someone points it out, I am aware there's a BIOS version 2.58 available, but from the readme file it doesn't appear to have any fixes for this.The trouble started when I had just powered on the laptop from stand-by, and was setting up a WiDi connection to my TV. The laptop froze hard - no activity whatsoever, couldn't move the mouse pointer, no response to Ctrl-Alt-Delete. Kept the power button pressed until the laptop switched off. Then got a "2100: Detection error on HDD0" message when I tried to boot it again.My first concern was trying to salvage as much data as possible, so I removed the SSD and connected it to a different machine using a SATA-USB adapter. The SSD appeared to be in perfect condition, and I was able to copy all of my data off of it.Popped... Read more

Answer:X230 2100: Detection error on HDD0 - BIOS issue?

There are tons of threads on forum here about this error 2100 issue. Most of them relate to the drive (SSD as well as HDD) firmware. Is your SSD fw up to date?Look at the bottom of this your thread and find out another similar discussions.

9 more replies
Relevance 84.46%

Hi there guys! First of all, it's my first time to post something here. Just recently purchased a Thinkpad Twist. However, after a few days, all of a sudden, I always get the error 2100: Detection Error on HDD0 (Main HD). I'm not sure what exactly is the problem though because after a few minutes, when I restart, it'll load Windows 8 back and eventually after a few browsing and use of computer, will force restart stating there's a problem encountered, etc. Once it restarts, it gives the same 2100 error again. Please help me guys as I'm really frustrated. I can't seem to use the computer normally without force restart due to error and loading windows 8 thereafter due to 2100 error.

Answer:Thinkpad Twist s230u 2100: Detection Error on HDD0...

I have the same problem. When I reboot the computer it keep on showing this error and it happened very often. But when you try a few time reboot it may be OK . So frustrated......I will call the support center...

7 more replies
Relevance 82.82%

Hi, I've had my W520 since November or so last year, I swapped out the hard disk when I got it for a Crucial M4 256GB.  The machine has been fast and totally stable until now.  I'm using Win7 Pro and have not applied reg hacks or bois updates, it just worked. Now I am seeing the 2100: Detection Error on HDD0 sporadically after being unattended for about 30 mins.  Rebooting solves the problem.  The machine is set to never sleep or hibernate other than manually.  It hasnt yet occured when working at the machine but I suspect Windows is crashing, then this message appears as the machine tries to reboot.  When I reboot manually its detected and Win7 runs. Has anyone seen this or have any ideas? Could it be an overheating issue?Is my drive on the way out? It has been running far more than is strictly nessesary.The machine is set to never hibernate/sleep, so it cant be an error related to that.SSD Life reports the drive is in excellent health.  All files are stored on network shares, only program files on the SSD. RegardsMatt













Solved!

Go to Solution.

Answer:W520 + Crucial M4 256GB Fine for 10 months now 2100:Detection Error on HDD0

Try putting the old drive in and see if it does the same.Do note that SSDs tend to fail in unconventional manners compared to platter drives.

7 more replies
Relevance 81.18%

I have an x220i type 4286 with a standard 320GB mechanical hard drive. I ordered it in 2011, and it has been an absolute marvel for me for the 2 years that I've had it, then out of nowhere, I got the error message you see in the subject above, "2100: Detection error on HDD0" then when I go with the "Hit ESC to continue" I end up getting the PXE-E61: Media test failure, check cable" error message pops up. I removed the keyboard to get a look and everything...ehh..."looks" ok, the ribbon cable doesn't look torn or anything, and nothing in the back of the HDD looks wrong.  I removed the HDD to see if excessive dust was in there and it seemed ok, and I reseated it carefully, and it looked proper.   So I'm kind atorn as to what I should do now. I don't think I have another external HDD that will work to test, but apparently this is a common issue or something?  It seems a lot of folks have issues with the SSD but mine is just a plain-jane mechanical HDD. help?  Please?













Solved!

Go to Solution.

Answer:x220 - 2100:Detection Error on HDD0 // PXE-E61:Media test failure,check cable

Hi,
 
Most likely your HDD has failed   Can you connect it to some other machine via sata/USB adapter or direct to a desktop and see if it's accessible.
 
The PXE/media... error message is your laptop attempting to boot via the network since it can't boot the HDD.  You can ignore that.  All it means is that the boot devices earlier in the boot order list weren't bootable.
 
Z.

9 more replies
Relevance 74.62%

is my T420 dead?...can buying a new SSD get it going again? (Currently Samsung)  

Answer:2100: Detection error on HDDO (Main HDD)

Just wondering if this is SSD related or Motherboard related?....should I just get another SSD or stay away from SSD and go back to a regular drive?

4 more replies
Relevance 72.57%

Hello, I've bought a S540, december 2014. Since a few weeks I'm getting the error:"2100 : Detection error on HDD0 (Main HDD)"A clean install of Win10 doesn't work, he just isn't able to find the HDD so I can't install win10 on anything. Q1) Anyone agrees that this is way to soon for a HDD to die? Lenovo service centre in the Netherlands is not willing to do anything because one year of warranty is expired, really annoying.Q2) Current installed BIOS-version is 1.57, current downloadable version is 1.66. Could it be that a BIOS update will result in a detectionable HDD?Q3) If so, how can I update the BIOS via USB since the HDD is not available and my S540 doesn't have a CD-ROM player? See http://support.lenovo.com/nl/nl/downloads/ds038373 which only mentiones via a working Windows (HDD) and a CD-rom player. Arnord

Answer:S540 2100 Detection Erro on HDD0

I have the exact same problem.. I've changed the harddisk (Samsung SSD 840) to a brand new Kingston SDD (240 Gb). and it still does the same problem. I've had it in for diagnostics twice, but they can't seem to find the problem. Once in a while the computer detects the harddisk and I'm able to open windows (otherwise it opens the boot-menu), and it stays stable for somewhat 10 min and then the computer freezes and restarts.  I've had the detection problem for quite a while now (since March), and just restarted the computer and continued working until I turned it off myself. But the problem became worse, and now I can't even use it. I really hope you can help me. I love to work with this model, and I don't want to buy a new computer since I just started studying again and urgently need one..Thanks in advance! kgrovep

1 more replies
Relevance 62.73%

My wife received the error message "2103:  Detection error on SSD0 (M.2)" during a cold boot.  So I googled the error message, and there are a few topics out there. https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/2103-detection-error-on-ssd0-m-2/m-p/2161245 I updated my BIOS and still receving the error message after following the steps within this post.   The ssd is Samsung M.2 SSD 128gb PM851 6Gb/s, 04x4440.  If I buy a replacement, will this solve my issue?  I'm assuming so, I hope.  I just want to make sure because the price for these ssds are ranging from $150 (refurbished) to $199 (yikes.)  I don't want to buy a new ssd and the same error message will come back.  Appreciate any info or help! Thanks,Red 

More replies
Relevance 61.09%

Hey guysFirst, English is not my mother language... So there might be tons of mistake, sry about that.I ordered my X1 carbon with 120GB SSD 1 year ago, and i keep using it like normal.Every thing works fine but yesterday my SSD was full. So i decided to upgrade it.i bought a Plextor PX-G256M6e and clone the old 120GB SSD to the Plextor one on my desktop PC.Once I install the new ssd into my X1 Carbon Gen3 2015, everytime when i boot it up, there will be a message said "error 2103, ssd detection fail" something like that, and tell me to press the ESC key to continue. After I press it, It will boot up just like normal and i can use this laptop as usual. Everything works fine except when it boot up. In fact, I'm now typing this on the X1 carbon. If i re-install the old 120gb ssd again, that error screen won't appear. Can anyone help me to solve this error? I've searched and find different solutions to solve this annoying error, but no one works, not even ONE. There are some post in this forum too, and they don't work on my laptop as well... Thx a lot Matthew

Answer:Error 2103 when booting x1 Carbon Gen3 2015

This post might help.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/2103-detection-error-on-ssd0-m-2/td-p/2161245

1 more replies
Relevance 57.81%

This morning I installed new Hard Disk (WD Black2 Dual Drive) on my notebook Lenovo T410, then installed Win 8.1 on it too, It worked  for about 4 hours and my notebook stopped working. I tried to restart the system, but appeared the error: "ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1). How can I fix it?

Answer:T410 - ERROR 2100: HDD0 (HARD DISK DRIVE) INITIALIZATION ERROR (1)

Hi Wjroque,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issues after up-grading the WD Black2 Dual Drive on your ThinkPad T410.
 

Have you checked with updating the WD Black2 Dual Drive firmware for your system?
Please click here to visit the link to download the firmware for that and follow the WD Black2 Firmware Update Instructions.pdf located in the downloaded zip file.

Hope this helps.
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 57.81%

I have installed a Vertex 2 (2VTXE180G) some time ago in my Thinkpad T410 (2522-3FG). The installation was successfull, but after less than a week I got the 2100-Error.I thought, that the SSD could be damaged, so I sent it to warranty.Last week I got the replacement drive and today I wanted to install the drive. But it did not work. 2100-Error since the first boot. Is this a problem with T410 and the Vertex2 SSD?Should I send the drive to RMA or should I choose another drive? Does somebody run this combination without problems? Thanks,André 

More replies
Relevance 57.81%

Hallo.
I have a failed HDD.
In the past I have usually been able to help myself to at least retrieve any data from the HDD.
But this time the problem seems to be different. If it has any bearing, this is the first time since upgrading to Windows 7 and operating for I can't remember how long, since without any issues.
As I always have in the past, this HDD is formatted with a separate partitions (1) for the OS and program files, and (2) for my data. This has usually this been enough to retrieve my data by installing the drive in a second Thinkpad using a second HDD adapter and retrieving the data. These days I also keep most of my data on a NAS but I do have some folders on a D:\ or Data drive which I would like to retrieve.

This time however I cannot even 'see' the drive at all. Not when I try to boot from it, or as a second HDD using an adapter. It is not even visible under Disk Management in case it needed to be initialized (again?) So this time, I seem stuck, unable to help myself:

In the first instance, I get the Error 2100: HDD0 (Hard Disk Drive) initialization error (2) when booting from the drive.
When I press ESC to continue, the computer tries to initialize the HDD or something, and from memory, I think displays an 'unable to boot from any device' screen and shows the status for the devices without any operating systems.

When I try the same with the affected HDD but this time with an installation disc inserted, I do not see the 'Press any key to boot from CD or DV... Read more

More replies
Relevance 57.81%

Hi everyone, I have a working Thinkpad T61P Type: 6459 CTO. I want to install Windows 7 on this OCZ SSD drive but when I start the computer I get the error above. I tried this with the original BIOS version and with the upgraded version (2.26-1.08). I also tried upgrading the HD Firmware with this and this upgrade, but it didn't detect any upgradeable HDs. The original HD works fine and the SSD drive works perfect if I use it as USB. The SSD drive is also formatted. I'm clueless as what to do next. Any ideas, suggestions? Thanks... 

Answer:ERROR 2100: HDD0 (Hard disk Drive) initialization error (1)

Hi, I have X61 with exactly same SSD amd having exactly same problem. Did you resovle the problem? or anybody in Lenovo can help please? The SSD works fine in a desktop PC and dell laptop. So I consider this is a bug in BIOS. Thanks,Kenneth

4 more replies
Relevance 57.81%

Dear all. Since yesterday evening i am not able to use my T60 anymore as the HDD isnt getting detected as usual. After the BIOS bootup sequence the following error appears:  ERROR2100: HDD0 (Hard disk drive) initialization error (2) Press <ESC> to continue  As far as i press ESC i am getting a new screen informing me about "Cannot boot from any device" and my HDD is outlined as "4: ATA HDD0: Device Error". I already tried to find it via BIOS and by PC Doctor HDD check tool but nothing happened. The HDD isnt getting recognized anymore. There was nothing special due to the regular usage of my T60 and i am not sure if i would be able to at -least recover, data in any way back to somewhere. Any help, idea or even support would be highly appreciated. Thanks in advance and best regards SteveMessage Edited by T60_user on 11-09-2008 03:20 AM

Answer:T60 hdd isnt getting detected anymore (error 2100:hdd0, initialization error 2)

Hello, please try Ultimative Boot Cd or Ubuntu or Knoppix Linux Live Cd.Burn them to disk and boot with it. But it seems, that either the hdd or the board controller is faulty.

9 more replies
Relevance 56.99%
Question: 2100 Error on HDD0

Hi there, i have laptop Lenovo laptop which getting 2100: Detection error on HDD0. Does it means that my HDD gonna die soon? Or the machine as other problem which related to HDD 2100 error? What is the solution?
 

More replies
Relevance 56.99%
Question: HDD0 device error

Hello, My computer was on and when I came back it gave me the error HDD0 device error. I am not sure what all i am doing to find the problem but this is what i have tried so far. Googled the error -> takes me to lenovo forums about the same error [but 2007 posts] This didnt help much at all. Used the bootable flash drive i had with back track 4 in it to boot into it. I tried mounting sda1 which tells me it's a cdrom and is already mounted. I am asking around in IRC where people have told me to a] take HDD out physically and put it back in. b]Make a CD for boot loader for Windows Vista [i dont see this helping cause HDD is not deteced?] This is what I know about my laptop. It's a Lenovo T61 ThinkPad. I bout it roughly 2 years ago online [not sure about warrenties] I havent dont anything with it that might cause HDD to crash (to my best knowladge) This problem seems to be linked directly to Lenovo rather then HDD? from what i have read so far. I dont want to take forever to recover what i can, but a new HDD which i can't afford right now, and have the same thing happen again. Thank you in advance for any help.

Answer:HDD0 device error

I would try to reseat the HDD first. if that does not work press F1 at power up there is a HDD diagnosics in the BIOs you can run





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

1 more replies
Relevance 56.17%

I bought T60 (used) running WIN XP SP2 working fine, but the BIOS has password protected and I dont have the pw to change the BIOS settings. I used BERT software to reset CMOS password and data and time and rebooted. Since then I am getting following error. I tryed with new hard-disk but still i am seeing same error msg.Do you have any suggestions... 2100: Initialization error on HDD0   Thanks for your help.

More replies
Relevance 56.17%

I installed a new Seagate Momentus 5400.6 500 Gig internal hard drive in my T 500.  At random intervals,  the computer will randomy boot, and this error message will come up: 2100: Initialization error on HDD0 (Main hard disk drive). I have a brand new T500 that I just received mid March 2009. What is going on? 

More replies
Relevance 56.17%

Hello. I have W510 and change a standart HDD to SSD Corsair Force F240. And allready second time today have an error while power on: error 2100: HDD0 initializing error (1) how i can fix it? thanks Stas. 

Answer:error 2100: HDD0 initializing error (1)

Possible Solutions:http://forum.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61-New-hard-drive-will-not-boot-BIOS-doe... http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/quot-Error-2100-Hard-drive-initialization-erro...

9 more replies
Relevance 54.53%

Hi,my just over one year old lenovo t410s is not behaving properly. It freezes up unperiodcally in widows and produces a bsod for a couple of milliseconds. When it tries to reboot right after, the following error message pops up: Error2100: HDD0 (Hard disk drive) initialization error (2) Press <ESC> to continue. Pressing escape does not lead any way, the only way to buypass this message in order to enter windows again is to undock the laptop and pull out the battery, and then insert it again. I have read a couple of forum threads and tried some fixes and some registry cleaning, but none of them seems to work. Is this a hardware fault? Do i have to replace my 128 gig ssd, if so will the warranty cover it? Or is there some fix out there Thanks//Even Låte 

Answer:2100: HDD0 (Hard disk drive) initialization error (2)

It sounds like the HD is failing FAST. 1st you should already have done. Get a backup image or at least your data depending on how long it will run before generating the error. Data is lost when it hits that state so the last file is likely incomplete or useless.Have you run the HD diagnostics from your system? It part of the Lenovo tools. It could be thermal related as well. Runing in a cooler area might give you a longer run.SSD drive, well I've seen a few fail and there is no bring them back when they're going.





T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

4 more replies
Relevance 54.53%

Hello!Namely, I was put my new SSD ADATA SP550 240 GB to ThinkPad T400.After turn on my computer, "drive LED" don't turn off.The next a lot of time I see ""error 2100: HDD0". When my new hard drive is connected, I can't open BIOS very fast. When I unplug hard drive and run installation Windows 7 and in during initialization I connet my SSD to notebook (SATA II interface).Windows 7 installation can see hard drive but I can't install Opering System on this because this hard drive is not bootable. Thank you in advance for your time.

Answer:ThinkPad T400 + ADATA SP550 240 GB error 2100: HDD0

Hi and welcome, bipocichI assume this issue is the BIOS and SSD firmware incompatibility related. Lenovo support site and forum confirm it's the most likely cause.Check out the recent versions on the Lenovo and SSD manufacturer support sites.

2 more replies
Relevance 54.53%

hi i got a R61i, was working just fine, all of a sudden it doesnt work fine and it gives me this error       2110: HDD0 (Hard Disk Drive) Error ReadingPress <ESC> to continue now i do press escape and i get a list of my it gives me my boot list and it goes like this: Cannot boot from any devise           Current boot order and devices status              1: ATAPI CD0: Model HL-DT-ST DVDRAM GSA-T20N-(-> )No valid operating system              2: USB FDD:                                                                    -> Device not found              3: USB CD:                                               &nb... Read more

Answer:2110: HDD0 (Hard Disk Drive) Error Reading

That doesn't sound good at all  I would personally start by removing and the reinserting the hard drive, maybe it's got a bit loose. The fact that the hard drive is recognised in BIOS doesn't favour this being the solution, sorry. I would then create a bootable cd of PC Doctor or Hitachi Drive Fitness Test, (preffered), and run intensive diagnostics on the hard drive. If you are unsure about how to remove / replace your hard drive, please post your Type and Model Number, this will help members help you. Thanks

1 more replies
Relevance 54.53%

Help!  My computer was fine when I left work; I shut it down to put it in hibernate mode when I left, as always - when I try to turn it on now I simply see: "ERROR2110: HDD0 (Hard disk drive) read error Press <ESC> to continue" Why would it stop recognizing my hard drive, and how do I fix this? I have a tablet, X61, running Vista, 2G RAM, not sure what else you might need to know. Thank you!Esther

Answer:2110: HDD0 (Hard disk drive) read error

go to hitachi hdd website, and download a copy of the hdd fitness test, it will do a surface scan to see whether it is software corruption or drive sector corruption. If it is the latter, then you would need to get a new hdd or claim a new hdd from warranty if you are still within warranty.  I hope you backed up the files on the hdd. If you need to download the hdd information, you will need to get an external usb caddy, and plug into your desktop or another laptop and download it that way. Provided that there is no password of anysort. 

2 more replies
Relevance 54.53%

 URGENT!!!NEED Help. I am getting the following Error on my T61 laptop. ERROR2100: HDD0 (Hard Disk drive) initialization error (2)Press <ESC> to continue Got this error last week. Tried to attached the seagate laptop HDD to another laptop and PC but it didnt work. It just frezees during boot. I have noticed that the HDD makes some sound like a regular HDD but then stops. I have attached another HDD on my laptop and it works just fine, but the original 1 hasent worked a day since the error occoured. Please suggest what i should do as any update/patch is not possible as i am unable to boot into the bios with the HDD installed. also the HDD gets detected only on 1 PC when used as a primary HDD. Im a novice but can follow instructions. Awaitng some help as Data is important. Thanks in advance.   Some additional Info:- Using Windows7, no recent updates, recent software installed sandiebox, Changed HDD from 80GB seagate 5200 to 320GB HDD Seagate 7200 momentus. Hope some1 can help spot some correcting factor.  













Solved!

Go to Solution.

Answer:T61 "2100: HDD0 (Hard Disk drive) initialization error (2)"

Hello,
 
That usually means the hard disk drive is failing.  Seagate does offer a diagnostic program called SeaTools for Windows here on their web site to test a hard disk drive to see if it is faulty or not.  That program needs to be installed onto a working Windows computer, after which the suspect hard disk drive can be plugged into it for testing.
 
If you do not have access to a separate computer to boot from and attach the suspect hard disk to, Seagate offers a version of the software here on their web site that can be written to a CD-R to make a boot CD for the computer.
 
Regards,
 
Aryeh Goretsky
 

3 more replies
Relevance 54.53%

Hi, I updated BIOS on my ThinkPad Yoga to the latest version (i went from GQET35WW to GQET38WW according to the log). After I installed WIN 10 TP and Ubuntu 14.10 (dualboot with GRUB2).Afrer a while I started recieving POST ERROR 2100 after cold boot. I thought my HDD is gone, so I went to dignostics menu and immidiately my HDD turned on (I heard it spin up), so I ran the tests (everything was successful) and everything was working correctly. Next day I had the same issue - so i just launched diagnostic menu, my HDD spins up, then I just exit the diagnostics menu and everything is working correctly... I have read some thread about this problem, but everybody is talking about their SSD drives. I suspect that the new BIOS is the problem, before that everything was OK. Thanks for any advice. 

Answer:TP Yoga POST Error 2100 HDD0 after BIOS upgrade

Hi aa07, I had a situation similar to yours: a Thinkpad E531, with Windows 10 TP and Ubuntu 14.04 LTS. I happened to see the error after a VERY extensive update of Windows 10. I just managed to solve the problem, though do not know if this will solve the problem permanently: in Application Menu under Setup, I entered in Config tab and chose Serial ATA (SATA), and changed the value (of SATA Controller Mode Option) to Compatibiliti (originally it was on AHCI). After that the laptop was working again like a charm. I tried to change back the value to AHCI and still it boots smoothly (actually I did not dedicate time to figure out what those two values mean). Anywa I beleive it's the fault of Windows 10 TP, since I had the problem immediately after Microsoft update, and actually the Wndows does not load anymore (I see a big )': in the middle of blue screen displaying an error), and though Windows tried to return to the previous version, it still does not load. It's the last time I'm going to try a TP product of ANY type. Hope this helps.Best

1 more replies
Relevance 53.71%

Dont know what to do.. I have the corsair F120 SSD and there is no new firmware for it.. everything is up to date in my system, using win 7 ultimate. I haven't tried running SATA in compatibility mode instead of AHCI because I then have to reinstall everything and losing alot of the SSD write speed. The laptop works if I restart it after the error(ctrl+alt+delete) and I am only getting this error when I power on the laptop. I Haven't had any issues in windows at all. I really dont know what to do. 

Answer:x201s with new SSD - HDD0 2100 Initialization error every time i cold-boot

Hi sinnes!
 
Check that your SSD is not a recalled Corsair Force 3 120GB F120:
 
http://forum.corsair.com/v3/showthread.php?t=95688 
 
 

1 more replies
Relevance 52.89%

Hi, I have a T410s with the latest BIOS 1.50 and a Intel X-18M 160 GB (FRU 45N8019). If I try to boot I get the hard drive initialization error. I used the Intel Flash Tool and it says the intel drive has the latest firmware. I also changed BIOS to compatibility mode. What can I do to get this working? As I saw on Thinkwiki (http://www.thinkwiki.org/wiki/Category:T410s) the laptop was shipped with this SDD so it should work, no? Thank you.













Solved!

Go to Solution.

Answer:T410s and Intel X18-M (SSDSA1M160G2LE): 2100 HDD0 (Hard Disc Drive) initialization error (2)

Can you boot a Linux Live USB and access the drive from there? It's possible the drive has failed.

3 more replies
Relevance 52.07%

Hello, I secure erased the Samsung ssd in my x300. I had already done that before with no issues but this time the system did not react for an hour or two so I had to manually turn it off and back on again. Now the SSD is not recognized by the BIOS anymore - booting is sluggish and I get  2100 HDD0 Hard Disk Drive - Initialization Error (3)  I already tried attaching the ssd to an external 1,8" mSATA-> USB adapter but it didn't help.  My laptop is out warranty for about 4 months now - does anyone have an idea on how I can get it to work again w/o having to purchase a new mSATA drive (which easily runs $150) Thanks  Andreas













Solved!

Go to Solution.

Answer:x300 - after Bios secure erase "2100 HDD0 Hard Disk Drive - Initialization Error (3)"

Hello andrasz14 and welcome to community,
 
Kindly update the BIOS and check, also check with another SSD if available
 
 
Best Regards,
Tanuj

6 more replies
Relevance 49.61%

Deciding between c720-2103 and cb3-131-c3sz.New to chrome books. Use mostly to browse, answer emails and stream videos from Netflix, Hulu, Acorn, etc. Any thoughts greatly appreciated.IMH

More replies
Relevance 48.79%

Hi all

I?m using Word 2013 and do a lot of scanning & editting, everyone knows that most scan results will contain at least one or more unrecognised characters (which is where the FIND AND REPLACE feature comes in handy). One certain character/mark which, I don?t know what it?s called and I cannot figure out how to enter it into the FIND WHAT field is a mark which looks like two comma?s-really close together.
Does anyone possibly know the keyboard shortcut for importing this character into the FIND WHAT field - and out of curiosity the name of this character?

Thanks in advance.
 

Answer:Word 2103 strange character

9 more replies
Relevance 48.79%

I wish to be able to enter date into Outlook Calendar and have it sync with Excel.

I'm aware of import and export options but this is too cumbersome - much better if they synchronised each time the calendar was changed.

Specifically, I want to put bookings into the calendar and then have that information in an Excel sales log to track type of booking, date, location etc.

Is this possible? If so, how easy it to do?

Thanks in advance for any answers

Stu
 

Answer:How to sync Outlook 2103 and Excel

Welcome to TSG Stu, Sorry you haven't had much luck on your post.

There was discussion on TSG Post 972770 that discusses some what your wanting to do.

I'll paraphrase and say "Don't try to run a business from an email program'. It's cumbersome and never works correctly. Outlook wasn't designed to interface with other application, though there are some whizzes out there that make it do things...My experience.. it would be faster, better and easier maintained in something else.

You hit it on the head when you mentioned..import/export was cumbersom. It only gets worse from there.
 

2 more replies
Relevance 47.97%

Hi,

I have Outlook 2013 on Windows 7.

I currently cannot send email from my POP/SMTP Sbcglobal.net account; they just get stuck in my outbox. The size of the emails are very small (i.e. 5 kb) since I am just testing to see if I can send. I used to be able to manually go in and send each email individually from the outbox, even though they would not auto-send, but since yesterday have been unable to do even that.

I checked and double checked my settings to ensure that they are correct, which they are as far as I can tell. Attached are .jpg of my settings in outlook. I can receive emails in this account just fine. I have disabled the scanning of outbound email on my AV software. I have deleted the account and have made a new one, but the problem is still present. At this point I have searched and searched the internet for a solution but could not find one.

It seems that for some reason Outlook is not properly connecting with my outbound smtp server and I cannot figure out why.

Any help troubleshooting this matter would be great.
Thanks in advance.
 

More replies
Relevance 47.97%

hi,
I have followed this tutorial and the DLL has
been built.
http://www.codeproject.com/Articles/149258/Inject-HTML-and-JavaScript-into-an-existing-page-w


I moved it to Windows System 32 directory
I am now trying to register using this method that worked on a 32 bit system
 %SystemRoot%\Microsoft.NET\Framework\v4.0.30319\regasm.exe Plugin.dll

I opened visual studio command prompt but I get error saying
cannot locate DLL?

thank you

More replies
Relevance 47.56%

running 1.40 biosthink I have WWAN model as there is a SIM slot and there are a red and blue wires ready for the 3G wireless card.all lenovo drivers etc checked to latest versionsInstalled 128GB Kingspan which failed to do anything and caused the whole system to be unbootable. Turns out the ssd was dead as it did not work in working usb enclosure.swapped in 64GB msata minipci from my old eee901 it is the correct size for the lenovo slot - it wasn't for the 901 and I am now getting 2101 Detection Error on hdd2 on boot up.I have tried reseating the card, cleaning the pins, reseating, booting to Hirens, Slacko, Gparted, Fedora and not been able to see it as the error code is pre OS... Anything I can do? - roll back drivers, roll back bios, buy specific brand msata any suggestions welcome :-)

Answer:Error 2101 Detection error on HDD2 (mini sata) X220

HiIt seems newer drive is needed or its firmware. Chek out SSD manufacturer site for fw update.Since x220 BIOS 1.16 or something like this one, msata SSD error detection has disappeared. Except of rare cases with some Crucial (or Corsair, didn't remember) and Samsung drives. Also do not use OCZ drives.

7 more replies
Relevance 47.56%

Whenever I try shutting down my computer normally, it is extremely slow and displays the message: Error 2101  Detection error on HDD2 (mini sata). This causes some problems on my computer. My laptop is a Thinkpad T530 with Intel Core i7, 500 GB HDD, and 8 GB RAM. Any suggestions?

Answer:Error 2101 Detection error on HDD2 (mini sata) in T530

do you have mSATA installed on the system???

6 more replies
Relevance 47.56%

Hallo, Since the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up. Thanks in advance for pointers!!! P.S: I looked up in the community for similar errors - only couple found and no solutions.----------------------------------------------------------------------------------------------------------------------------------------------------------------Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster  













Solved!

Go to Solution.

Answer:Edge e530 - Error 2102: Detection error in HDD2 - press escape to continue

That error is coming from BIOS, it means there is something wrong detecting the mSATA SSD.  It could point to a hardware problem.  It is definitely not a software problem.  I would call the support line in your country, and ask what they recommend about it.

2 more replies
Relevance 47.56%

I got my 430s, and it's with a 16Gb mSATA SSD cache inside.Now everytime when I open my PC, it shows Error 2101 Detection error on HDD2 (mini sata) and I need to press ESC to continue.Is there any software or driver's problem, or it just phsically got wrong?Any techician could help to solve, or I have to do it my own?










Solved!
Go to Solution.

Answer:Error 2101 Detection error on HDD2 (mini sata) in...

Have you ensured you are running the latest BIOS?  What version BIOS do you currently have? After pressing escape does the computer boot normally?

9 more replies
Relevance 47.56%

Hi guys, I fitted a 64GB Sandisk P4 mSATA SSD today in my week old X220 4287CTO & get this error, I thought it maybe the bios causing the problem as reported in the forum but the threads I have read seem to be the SSD not being recognized at all. Any help would be appreciated. Product SKU: 4287CTOProduct Name: ThinkPad X220 - 3 Yr Depot Topseller Warranty Intel Core i5-2410M Processor (2.3GHz, 3MB L3, 1333MHz FSB)7 Home Premium 64 English12.5" Premium HD (1366x768) LED Backlit Display, Mobile Broadband Ready, 2x2 Antenna2 GB DDR31333MHz (1 DIMM)Keyboard UKFingerprint Reader720p HD Camera20 GB Hard Disk Drive, 7200rpmNo Micro Solid State DriveThinkPad Battery 29+ (6 cell)Country Pack United Kingdom with Line cord & 65W AC adapterBluetooth 3.0Intel Centrino Advanced-N 6205 (2x2 AGN)Integrated Mobile Broadband - Upgradable

Answer:Error 2101 Detection error on HDD2 (mini sata)

Yeah I am getting the exact same error 2101. Also X220 but 4286-CTO which I brought from US. The BIOS version is 1.17(highest I can find now).Wonder if it is a compatibillity problem or simply the bios is not programmed rightly.

7 more replies
Relevance 47.56%

I have an issue with a Lenovo X1 Carbon Touch Windows 8. It has a 512GB SSD. (Believe its Samsung)  Earlier today the computer frooze while saying plug in your charger, so I had to hold down the power button to do a forced shutdown. Upon turning it back on I got this error after hanging on the Lenovo logo for a good five minutes. Error: 2100: Detection error on SSD0 (M.2) The SSD is not visible anywhere not in BIOS or anywhere else. I've tried reseating it however it doesn't help. The BIOS is upto date, any I'm unable to update the SSD Firmware as I cannot get onto Windows as per the instrutions here - http://support.lenovo.com/us/en/documents/ht082504 1. I cant update firmware for the SSD as I cant get onto Windows2. The BIOS firmware is the latest 3. I've taken the SSD out and put it back in4. Reset BIOS settings5. Disconnected Battery and left it for an hour I'm panicing as all my data is on there, I assumed it was safe as it's SSD.  Please can anyone assist?  

Answer:X1 Carbon - SSD Failure? Error 2100: Detection error on SSD0 (M.2)

Sorry for a 2500 GBP laptop I'd expect better really. This is the SECOND X1 Carbon I've had out of 4 to fail me with the SSD. I've lost all my data (Yes I know I should have backed it up) that I'll never be able to recover. Ultimately I've given up on the brand of Lenovo, my company who supplies exclusively Lenovo hardware to our customers are now switching to Dell as a direct result of the lack of support and poor hardware/firmware design. Just ordered 2X Dell XPS 13's as a replacement for my less than 6 month old Lenovo X1 Carbon, never thought it would come to this but the lack of support, knowledge and consitant hardware failures has left me no choice, I can't operate or do my work on an Lenovo X1 Carbon, fingers crossed the Dell will be better as it cant get any worse than Lenovo. To anyone who has Google'd the error and found this thread some cold facts; According to my resources this error can be caused if the system is not shutdown, BSOD or sudden power loss. If it doesn't resolve itself, there is a good chance it wont. Cycle the computer numrous times, let the battery run flat. Try it a few more times. Reset the BIOS, Update the BIOS. Prevention is better than cure, supposedly updating the SSD Firmware might have prevented this from happening in the first place.Lots of reports that this is an issue with BIOS and Firmware issues that result in an early death. I can confirm this having happened twice to me on different generation and model... Read more

3 more replies
Relevance 47.56%

Model: T450sEquiped as:Intel i54+4GB RAM256GB SSD (M.2) Configured as boot disk running Win 7 x64500GB HDD as additional storage Issue:Seemingly at random, approx once every one to two weeks while PC is on and at the desktop but not actively being used (meaning no user is sitting in front of it performing tasks) it will error and crash.  The error is a black screen with the following error: 2101: Detection error on SSD1 (M.2) Press Esc to continue. According to the user Esc does nothing and the only escape is to long press the physical power button until a power down occurs.  On reboot the system comes up without issue.  No user has actually seen the crash take place.   MY QUESTION(S):1st.  Is this most likely an issue with the T450s not being able to reliably boot from the m.2 slot or is this more likely an issue with the SSD installed in the m.2 slot?2nd.  Is this something altogether different?  Any (knowledgeable) advice or info appreciated.

Answer:T450s Thinkpad - ERROR 2101: Detection error on SSD1 (M.2)

It is hard to diagnose without seeing it, but my experience has been that the Gen4 and later CPUs (like yours) support a very low power state that is incompatible with some devices. (that would make it a problem with the card) Make sure you have the latest BIOS and power manager software installed. Look in the device manager and find the M.2 SSD. There should be a power management tab. Turn off the option to allow the system shut the device off to save energy.

4 more replies
Relevance 46.33%

Please, any idea how to fix error 2104 with laptop ThinkPad p50 full error message >>  2104: Detection error on Storage Device2 (m.2)

More replies
Relevance 45.92%

Comodo SiteInspector has new features and it's for free to sign up. Good service for those who have own websites.
 

Answer:Malware detection and blacklist detection for Websites..sign up for free!

I saw this earlier, looks like they changed it from 30 days to 365 days.

These type of services from Comodo I like.

http://siteinspector.comodo.com/public

http://siteinspector.comodo.com/public/features
 

9 more replies
Relevance 45.51%

I have an emachines e520 laptop and am trying to go from Ubuntu to XP, however every time i try doing the install, it blue screens and gives me the "STOP: 0x0000007B (0xF7AF4524,0xC0000034,0x00000000,0x00000000)" error.

I have downloaded the drivers and included them into the XP install disk. i made an iso file from the boot disk and then added the drivers to the ISO and then burned it back to a disk. And still no luck. I do press F6 but it still goes to expect it from a floppy drive, which the laptop does not have.

the HDD in the system is a sata drive and Sata mode is set to AHCI in the setup utility of the comptuer.

Help!
 

Answer:HDD detection error

Try setting the mode from AHCI to IDE in the BIOS, then boot from the Windows CD.
 

2 more replies
Relevance 45.51%
Question: Main.exe Error

hi, when i try to log onto a game on the internet i keep getting this message, main.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Does anyone know what i should do so i can fix it. thanks, kimMoved from the "XP Forum". ~acklan~

Answer:Main.exe Error

Hi michasma and welcome to Bleeping Computer.Main.exe appear to be part of a program call SpoyCop ScanCheck. have you installed this program on your computer?

2 more replies
Relevance 45.51%
Question: aol main.idx error

my aol 9.5 main.idx file is missing and i cant find it in the backup folder to copy it into idb folder idont have a disk and need help pls

Answer:aol main.idx error

AOL discs can be had anywhere for Free.....any PC store matter of fact.Personally i would never use it and haven't for a long long time...

1 more replies
Relevance 45.51%
Question: APC Main Error?

Hello!!!The past couple times I have turned on my computer this message pops up. It doesn't seem to be effecting my computer in any way (for right now) and I haven't downloaded anything new. I'd like to remove it before it causes a problem. This error message is frm the APC Main...whatever that is.Load XML failed 5 dll path C:\program files\ascentive\performance center\APCLang.dll

Answer:APC Main Error?

Do you have the program Ascentive Performance Center?I have also found thisIt appears the "APC" in "APCMain" is "Ascentive Performance Center", which is linked to a Rogue" Program called "SpywareStriker ProThe process of cleaning your computer may require you to temporarily disable some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware Free version and save it to your desktop.NOTE: Before saving MBAM please rename it to zztoy.exe....now save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the dri... Read more

15 more replies
Relevance 45.51%

I want to know what the heck this is all about.....attached image below....
Only started doing that when i tried to replace my stock nvidia card with a Radeon 9600se. there were two other errors the last time i booted my machine but didn't show this time. but anyway, would be nice to get rid of this error message, thnx in advance.
 

Answer:Main: Error?????? plz help

http://support.microsoft.com/?kbid=831427
 

1 more replies
Relevance 45.51%
Question: Main fan error

Gateway laptop ....Well i updated my laptop to windows 7 and when the installation process finished it gave me a message saying main fan error i already reseted the bios but i cannot get the computer to start, i downladed the bios but i cannot run it since i dont know how
 

More replies
Relevance 45.1%

Hey all,
I need to be able to write a code in java that can detect errors in a bit string of any length. I think a good place to start would be learning exactly what and how hamming's error detection code works. anybody got enough time on their hands to help?
 

Answer:Hamming error detection

oh yeah, and can anybody tell me how to change my profile from private so i can send PM's? thanks all
 

2 more replies
Relevance 45.1%

All right, I just built a computer, and whenever I plug the dvd burner into the motherboard, it won't get any power, but when I unplug the IDE cable from it, it gets power just fine. I've tried using a different cable, different CD drive, and unplugging unnecessary things (video card, ram, hard drive, etc.), and same result every time, anyone got any suggestions? Here's what I got:
AMD Athlon 64 3700+
ASUS n-force 4 motherboard A8N5X
1 gig stick ECC PC3200 ram (x2)
250 gig SATA hard drive
Geforce 6800 PCI-E 256 MB vid card
500 W power supply

More replies
Relevance 45.1%

hello, I've a Lenovo Thinkpad Edge E5320 Core i5,and every time if i start my laptop afterwards he was or outor standby i get a error thats called; 2102the remainder text in the error message is:Detection error on HDD2  (Mini Sata)i'm wondering wat it is an how i can fix it? i'm hoping for a quick answer, thanks TT de Souza

Answer:2102 Detection error

Hi, TTdeSouza
 
I did some quick research to see how others have gone about fixing this error. I found this thread here from a Lenovo employee on the same issue. According to the employee, someotherguy, the issue is indicative of a hardware fault. Due to this, I would recommend giving Lenovo Support a call at your earliest convenience.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

1 more replies