Computer Support Forum

X250 issues with Sierra EM7345 after Windows Fall creators update 1709

Question: X250 issues with Sierra EM7345 after Windows Fall creators update 1709

After installing Windows Fall creators update 1709 my Sierra EM7345 almost doesn't work. When I establish the connection everything works fine, but only for 15-30 seconds, then connection goes away. Ping 8.8.8.8 starts throwing error: General failure. I tried installing newest driver from lenovo support, but situation hasn't changed. Driver properties screenshot attached.


























photo_2017-11-23_14-56-43.jpg ?33 KB

More replies
Relevance 100%
Preferred Solution: X250 issues with Sierra EM7345 after Windows Fall creators update 1709

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 100.92%

I am having issues updating from 1703 to 1709, and I could use some help.

I used the native Windows Update tool to download 1709. I restarted my computer when prompted to begin the installation. I got about a quarter of the way through the installation when I got a blue screen. The computer then reverted back to 1703 automatically.

I used the Windows 10 upgrade assistant tool, but that resulted in the same blue screen. (Also, I noticed that the tool mentioned that my computer was running a much older version of Windows 10 than is actually installed.)

I used the Windows Update Troubleshooter, which seems to have cleared most of the files in the "SoftwareDistribution" folder. After using the Update Troubleshooter, I tried using the upgrade assistant tool again, but it still failed. Now, when I used the native update tool, it says that my system is up to date. But that is impossible because I still haven't been able to download and install 1709.

Any suggestions? I have an HP Spectre x360.

Answer:Windows 10 Fall Creators (1709) Update Issues

Hi, please post a screenshot of your partitions using Minitool partition wizard.





To post a screenshot please use the Insert Image icon above your post to the left of the video icon. Thanks.



Please post your windows build:
Windows key + R, winver
Also a screenshot of your Update History.

What is your disk type? (HDD, SSD etc?)

Please make sure you have around 20Gb free on your C: drive, and 500Mb of unallocated space on your system drive.

1. First check your disk:
Download and run Hard Disk Sentinel (trial) and make sure all disks are reported as good.
If not, do not continue, and post back .

2. Now check your file system:

From an admin command or powershell prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Post back the result, which you can get after a restart as follows:
Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
or
How to read Event Viewer log for Chkdsk in Windows 10 [Tip] | Reviews, news, tips, and tricks | dotTechdotTech
or
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!
Make sure the result is clear or fixed- else do not proceed.

3. Now check your system files. From an admin command prompt
SFC /SCANNOW
and post the result.
Make sure the result is clear or fixed- else do not proceed.

What went wrong?
Then see this where many error numbers and messages are listed:
How to Troubleshoot Common Setup and Stop Errors During Window... Read more

1 more replies
Relevance 91.64%

Hi Guys, Looking to consolidate the list of issues I have with my TP since updating to Win10 Fall Creators Update (1709) update. And I am looking for help in resolving the outstanding issues. I have gone through the common resolution methods on this official Lenovo site as well as from this collection of tips. Outstanding issues below. 1. Keyboard AUTO backlight setting is not working, light doesn't come on when its dark on its own.2. Auto screen brightness control is not working3. Screen rotation button is still greyed out in the sidebar as well as settings4. OLED colour profile settings had stopped working and disappeared. (But this fix worked)5. Intel SGX drivers were busted (finally updated on their own via Win10) Now for 1, 2 and 3, I think this is an integrated sensors issue and I have tried uninstalling the Intel Sensor Solution device drivers from Device Manager and then updated the drives through Lenovo Companion. Nothing changed.Windows Update later also installed an update called Intel Integrated Sensor Solution but these issues have not gone away. On a positive note, this Win10 update and the related updates to Synaptics touchpad drivers resolved the issue of the cooling fan being constantly being on (this forum attributed the issue to bad synaptics drivers). Anyone else facing the same issue related to sensors on this machine? As of 5 minutes ago, there were no new updates on LenovoCompanion or on Win10. Thanks

More replies
Relevance 88.45%

I?m happy to announce the Fall Creators Update (version 1709) is fully available for all compatible devices running Windows 10 worldwide! Full availability is the final phase of our rollout process. When a new feature update is released, we begin by targeting a select set of devices that we believe will have the best update experience based on device characteristics and testing done by us and our device partners. We then monitor feedback for issues around application and device compatibility and make adjustments along the way, if necessary. Actively listening for and responding to issues as they emerge helps us confidently expand the release to additional devices while maintaining a quality experience. We?re pleased to announce that the Fall Creators Update was the fastest Windows 10 release to reach 100M devices, all while achieving higher customer satisfaction ratings compared to prior updates!

Enterprise customers following this same targeted approach for the Semi-Annual Channel can also fully deploy when ready. As an IT administrator, you decide when to broadly deploy once you have validated the apps, devices, and infrastructure in your organization work well with this release. You no longer need to wait for our signal ? deployment control and choice is yours.* IT admins can leverage Windows Analytics tools that help you plan, test and deploy Windows 10 to your organization, and help accelerate Windows 10 migration. You can learn more about Windows Analytics tools ... Read more

More replies
Relevance 88.45%

Hello,I have successfully installed the update But my Acer Aspire F 15 Notebook wont Reboot and shuts of when I use AIMP4 and A Browser at the same time,there are other issues but this is the worst,in generally my pc runs like the wind.

More replies
Relevance 88.45%

Hello,I have successfully installed the update But my Acer Aspire F 15 Notebook wont Reboot and shuts of when I use AIMP4 and A Browser at the same time,there are other issues but this is the worst,in generally my pc runs like the wind.

More replies
Relevance 87.58%

Hello Folks,
I have a XPS 13 9360, 16 GB with an upgrade Samsung 960 Evo NVMe 1TB drive. I'm running Windows 10 Pro Build 1703, and the system runs nicely. However, yesterday Windows Update made me upgrade to 1709. The upgrade process ran smoothly, but afterwards I had the following problems:

When I tried to save a Hyper-V VM, my system sometimes crashes with a blue screen
When shutting down windows, the system gets stuck on the "Shutting down..." screen and can only be switched off by long-pressing the power-button. After that, the system boots into maintenance mode, when rebooting again it boots normally.

I forced a downgrade to 1703 and the problems disappeared again. Now I have disabled upgrades and am trying to find out how to fix this.
Has anyone run into problems with the 1709 update? Any suggenstions?
Cheers,
Uwe

Answer:XPS 13 9360 Windows Fall Creators (Build 1709) Update

It seems the new Creator's build is causing several different types of problems with some of the Dell systems.  
Since you have already rolled back, I suggest you continue to wait until an update is released which helps.  Since there are several threads concerning some of these problems you should be able to tell when a fix is found.
I don't about the Hyper-V situation but I seem to remember it having problems with earlier builds.

1 more replies
Relevance 87.58%

Has anyone successfully upgrade to the latest Windows 10 update on a Dell Precision T5500?

Answer:Dell T5500 - Windows 10 1709 Fall creators update

Dell doesn't support Win 10 on the T5500, so it may not work...
You might get some help if you post exactly what problem(s) you're having with Win 10 Fall Creators Update on this PC.

1 more replies
Relevance 87.58%

Hello I've got a problem with Windows 1709 update. After I updated, games only sees and uses my R7 APU graphics card.My dedicated R9 M385X has absolutely no usage. In AMD crimson software, I can't set anything to "High performance" mode, so everything sticks with the R7 card. (More precisely I can set to R9 but the program sets it back to R7). In power options I slide the slider to the Max. Has anybody any solution for this problem? Thank youSorry for my English

More replies
Relevance 87.58%

Has anyone successfully upgrade to the latest Windows 10 update on a Dell Precision T5500?

Answer:Dell T5500 - Windows 10 1709 Fall creators update

Dell doesn't support Win 10 on the T5500, so it may not work...
You might get some help if you post exactly what problem(s) you're having with Win 10 Fall Creators Update on this PC.

54 more replies
Relevance 86.71%

Hi,

Since the update, Microsoft is pushing strange Update Packages to me. Before the Update, everything was fine, now the Text says i.e.:
for AMD64 based systems KB4051963

but what the heck, I do have a x64 based system (Intel).

I don't now now if it is just the text what is wrong or if MS is really pushing wrong Update packages onto my computer.

Anyone having a similar issue?

Answer:Since Windows 10 Fall Creators Update (1709) - Update Packages weird

It’s OK, it’s just the way MS have worded the update. It’s fine to download & install.
amd64 based is just meaning that it is x64 based windows instead of x86 (32 bit). AMD owns the IP for 64-bit processes that we all use. Doesn't matter if it is AMD or INTEL .

1 more replies
Relevance 86.71%

Hi! When Windows update has just installed all the pending updates, the start menu don't show the option "update and restart", only "restart", "shutdown" and "sleep". It's normal?? I have Windows 10 PRO Fall Creators Update 64 bits.
Thanks!

Answer:Windows 10 Fall Creators Update (1709) don't show update and restart

Originally Posted by NSchwender


Hi! When Windows update has just installed all the pending updates, the start menu don't show the option "update and restart", only "restart", "shutdown" and "sleep". It's normal?? I have Windows 10 PRO Fall Creators Update 64 bits.
Thanks!



Sounds normal to me. Since all of your Windows Updates are up to date, there aren't updates to restart to.
Next week the first Tuesday of the month will probably have cumulative updates as well as other updates available sometime during the week and when the computer is ready to download and then install them you should see the option to update and restart shown again.

1 more replies
Relevance 86.71%

Hallo,nachdem Windows 10 update 1709 geht einiges nicht mehr am X121e.Lenovo Companion App meldet "Lenovo Companion hat einen Fehler festgestellt, Aktualisierung"Wenn man Aktualisierung aufruft wird SystemInterfaceFoundation.exe heruntergeladen.Bei der Installation dauert die Ferigstellen Phase sehr lange und ein Neustart wird gefordert.Beim nächsten Start zeigt Companion die gleiche Nachricht.Msiexec hat mehrer logs in user.AppData.Local.Temp angelegt.Ein Fehler ist aber nicht zu sehen.Die Logs sind leider zu **bleep** und kann man nicht anhängen.Product: Runtime x64 for Power Manager -- Configuration completed successfully.Es gibt noch ein paar andere Probleme am Laptop.Beim Herunterfahren muss man immer zum Abschluss den Netzschalter drücken, weil die Netzlampe anbleibt.Windows scheint wichtige Lenovo driver überschrieben zu haben und ich weiß micht wie man das beheben kann.Hat jemand eine Idee, wie ich weiterkomme?  





X121e, Samsung SSD 840 EVO 500GB , Intel Centrino Advanced N 6250 AGN, Windows 10 Pro

More replies
Relevance 86.71%

After updating to 1709 the sound to my AV reciever cuts off randomly all the time. Its connected with HMDI from my gpu (nvidia 980ti), and I've never had this problem. I've tried deleting drivers, updating them. I did a roll back to 1703 and everything was workig fine. Its using the regular windows driver. (High definition driver)

After that I did a manual update to 1709 again and tried both the default windows driver and nvidia sound driver, and both drivers work according to windows, but I still have the same issue with the sound coming on for a second and then goes away. I might add that the sound works perfecly with both windows driver and nvidia driver in 1703. And that in both cases I used the newest nvidia driver and I used driver uninstaller before installing it.

Any suggestions or someone with similar isse? It's so anoying since most of the time I use my desktop on my TV with a wireless keyboard and mouse.

Answer:Windows 10 Fall Creators Update 1709 - Sound HDMI issue

Unless you have a major pressing issue to update to the Fall CU - roll back and stay back for a while.

These updates have bugs that can take some time to fix. You are not missing out on any 'big things' sticking to the previous build.

more replies
Relevance 86.71%

ok, so for the past two days I've gotten bsod errors, and only today do I have the stop code, which is memory management.

the memory diagnostic tool built into windows reports no errors.

I have here an event viewer log screenshot, and a zip with the info the diagnostic tool has fetched.

DESKTOP-4IM836M-Fri_11_24_2017_212716_58.zip

More replies
Relevance 86.71%

After updating to 1709 the sound to my AV reciever cuts off randomly all the time. Its connected with HMDI from my gpu (nvidia 980ti), and I've never had this problem. I've tried deleting drivers, updating them. I did a roll back to 1703 and everything was workig fine. Its using the regular windows driver. (High definition driver)

After that I did a manual update to 1709 again and tried both the default windows driver and nvidia sound driver, and both drivers work according to windows, but I still have the same issue with the sound coming on for a second and then goes away. I might add that the sound works perfecly with both windows driver and nvidia driver in 1703. And that in both cases I used the newest nvidia driver and I used driver uninstaller before installing it.

Any suggestions or someone with similar isse? It's so anoying since most of the time I use my desktop on my TV with a wireless keyboard and mouse.

More replies
Relevance 86.42%

Hi, I have a P50 recently updated Windows 10 Fall creators update. After the update my system no longer shows my wwan hardware (Sierra Wireless EM7455).I no longer have a cellular connection option in the network menu after clicking the network icon in taskbar tray,no cellular connection section in the networking settingsNo wwan device in Device Manager under Network AdaptersNo cellular connection shown in the Network Connections control panel under Network and Internet. What does show up in device manager is a 'Sierra Wireless Location Sensor' under the Sensors category.I did try to install the Sierra Wireless softwar from here: https://forums.lenovo.com/t5/forums/postpage/board-id/tp07_en. But it didn't help.I do not know if any of this has to do with the recent update on Windows 10 but if anyone else has experienced this please share your situation and solution if any.Any help is appreciated, Thanks.

More replies
Relevance 85.84%

windows 10 enterprise x64 fall creators update (build 16299.15) has following problems:- build-in ethernet (intel i218-lm (3) ) shows no connection in os and no network (cable is present and nic leds are active).- wireless adapter (intel dual band wireless-ac 7265) does not see wireless networks.- audio device is absent. in device manager only high definition audio controller [pci bus 0, device 27] has problem (device cannot start. code 10).all these happened after installing build 16299.15 on top of latest regular win10ent x64 version, also this is happened on clean install of insider preview build 16296 from iso and upgrading to build 16299.15.i tested build 16299.15 with default drivers from ms windows update, i did install all drivers from lenovo site with system update tool. nothing helps.there is one solution for wired lan - after installing full set of intel's drivers, running diagnostic on network adapter fix connection problem until next reboot.P.S. BIOS, Drivers, Updates, Dance with tambourine - all was done. I'm a sysadmin in our office, if anybody asks.

Answer:Thinkpad X250: No LAN, No Wireless, No Audio after Windows 10 Fall Creators Update (16299.15)

Hi Voljka,For company or production environment, Windows Insider Preview / Release Preview builds is not recommended, as the drivers may not be ready for all types of hardware.  I would suggest you revert back to Windows 10 RS3 (15063), and wait until it is ready and show up in the Windows Update.
Peter
ThinkPad X40 | ThinkPad W520 | ThinkPad T560 | ThinkCentre E73 SFF | ThinkPad L570 | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 | Vibe K5 Plus
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460 ; T560 | P50s ; Vibe K5 | K5 Plus ; M0620 Speaker Mod ; Windows 10 / Server 2016 ; Legion Y720

2 more replies
Relevance 84.97%

I updated my OptiPlex 7050 to the Fall Creators Update 1709 and my HDMI port has stopped working.  I'm running a dual monitor system, one monitor is using the display port and the other is using HDMI port.  After the update the port just stopped functioning. 
Here's what I've tried:

I've tried three different monitors
Tried three different hdmi cables, plus one HDMI to display port
Flashed the BIOS
Installed the latest display drivers from Dell

As soon as I roll back the update, everything is fine.  To stop Windows to keep trying to update, I've set the branch readiness level to "Current Branch for Business" and deferred it for 365 days. 
Is anyone else having this problem? 
I'm in No hurry to install this update! 

More replies
Relevance 84.97%

Connecting to an ethernet cable to the internet via a Dell USB-C hub prior to installing the Win10 Fall Creators update. Now my only option is to connect via WIFI. Windows 10 does not recognize my ethernet port on th Yoga 900. Anyone know how to fix this? Any help would be greatly appreciated. Thanks

More replies
Relevance 84.1%

The machine above has a serious problem.The machine is 6 months old and work without issue until the W10 fall creators update 1709.The machine started to randomly restart at least once daily. The machine is under warrenty and customer support has recommended, uupdating BIOS, reimiging the hard drive, problem continued, fitted new system board, problem persisted, reimiged the hard drive again but the problem persisted. This machine has been sent to the repair centre.Disappoiting, the machine is lised as tested and passed for updating to Windows 10 fall creators 1709, see below https://support.lenovo.com/gb/en/solutions/ht505322 I will come back to the forum if/ when the machine is repaired/ working without issue. 

More replies
Relevance 82.36%

Worked fine before.
I am buying expensive workstation hardware so I can use them for a long time, I have the full expectation to keep using this machine for another few years.

Dell.... you are working on an updated driver, right?

More replies
Relevance 82.07%

Since the upgrade to Fall Creators update the old style Defender UI MSASCui.exe produces an error if you try to look at Quarantined items on the History tab.

Error loading type library/DLL
Error code: 0x80029c4a

I'm not the only one, apparently. Also reported here...







Originally Posted by JohnSanders1


My problems did not start until AFTER the Windows 10 Fall Creators Update and the following two "Quality Updates"



https://answers.microsoft.com/en-us/...cc78197?auth=1

More replies
Relevance 82.07%

To begin here our PC specs currently running Windows 10 Home Version 1607 (build: 14393.321)


I'm now a member of the Fall Creators Update Failed to install group. I've tried to install with windows update and this came up.


I've tried using the media creation tool, windows update assistant, and downloaded a window 10 ISO for a standalone install but they have all failed. Windows update continues to attempt to install these updates but fails. It would be nice to stop these updates from attempting until a solution is found.

Here is the setupact and setuperr files.


Any words of wisdom would be much appreciated. thanks in advance.

More replies
Relevance 82.07%

Hi All

Not sure if this is a real issue or not, but it shows Other Updates all Failed, is it Related to Avast Free 17.8? or just a Windows 10 Update glitch, or nothing to be concerned about, I can try the update reset if need be

More replies
Relevance 81.49%

I installed WWAN card Sierra em7345 on X250 with Windows 7.How make GPS working? (not going to upgrade Windows)?Did anybody do it?Tank you

More replies
Relevance 81.2%

Hello,

I have updated Windows 10 1703 to Fall Creators Update 1709 from Windows Update from pc system settings...
everything downloaded ok ..no error messages of any kind popped up..restarted my pc ...and my apps and desktop settings were not altered and when i checked pc system of which version i have it showed...

Windows 10 Pro 1703 version 15063.674

When i checked windows update again it states 'Feature update to Windows 10, version 1709'

Ready to download...

I have just done it !

Windows 10 upgrade Assistant states new features need to be installed..

Should i have disabled my anti-virus and try again ?

Help would be appreciated

Thank you

More replies
Relevance 81.2%

Hi,

I have update three machines to the new Fall Update, and all of them have the same issue with the Logon Screen.
I have had the 'Cave' picture to be shown when logging in and after installing the Fall Update, this picture was replaced by the stupid Mountain Lake.
Ok, I thought, just let's set it back to my previous picture (I also tried my own ones). Have done it, also checked the box that the Lock Screen picture will be used on the Logon Screen, but after re-booting, the Mountain Lake was there again.

I have the same issues on all three systems (Surface Pro 3 with the Professional 64 edition, as well as on the PCs with the Home Edition.

Anyone experiencing the same and probably having a solution for it?

More replies
Relevance 81.2%

I installed the FCU 1709 today. About an hour ago, I was looking at my C: drive properties and I lost about 20 GB's with the install. Are there some very large download/install files on my C: drive that can be deleted now ? My C: drive is SDD 128 GB and before the install, I had about 75 GB's "free" and now I have 55 GB's free. It's not like I'm out of space, but a few more "feature" updates will make it so. I try to load data and other apps on my 1 TB conventional drive, if at all possible. When I look at my C: drive via properties, disk cleanup there's only about 15 MB's to be gained. What's up with all of this missing disk space ??

More replies
Relevance 81.2%

Hi, I've never had a problem updating my Win 10 Pro up til now. But for some reason, I am unable to go from current version 1703 to latest version 1709. I'm using the Windows 10 Update Assistant - which downloads the files and runs the installation. The computer then signs out and restarts - I see the blue Windows screen with the % going up... but once it reaches 18%, it flips to a black restart screen that tells me it's "Attempting to Recover..." followed by "Restoring previous version of Windows..."

And what a long process to try again all over to get to this point.

I have alot of programs installed on my PC and don't want to lose any of these... Has someone else encountered this issue, or can provide an alternate way of installing?

As a side note I have less than 12GB remaining on my C: would this be the problem????

Answer:Fall Creators Update v. 1709 Keeps Restoring to Previous Version

Originally Posted by orlando1974


...As a side note I have less than 12GB remaining on my C: would this be the problem????



It's very likely that it is.

Do you have a windows.old folder on your C drive and how much space does it occupy? Can't remember if checking that requires setting explorer to show hidden or protected operating system files/folders or not.

0 more replies
Relevance 81.2%

Thought someone might be interested to know what broke on this update, which did install without errors. I have spent 4 or 5 hours trying to sort out all it did. Some amaze me like deleting ALL my saved Restore Points!!

Windows Creator Update broke, reset or disrespected my settings choices of the following unacceptably:

1. Folder Settings - ALL folders in Windows Explorer were reset to the factory default views removing customized columns and choices for folder types. Why? What a hassle!

2. My custom recycle icons were reset to default. Also why? Sloppy updating.

3. Telemetry was re-enabled with yet more being reported in to the mother ship.

4. Privacy settings changed.

5. Removed all prior system restore points!!!

6. Reset my disabling of the touch screen.

7. Re-enabled a disabled Cortana

8. Reset my changed text highlight color

9. Changed back fixes for DCOM Errors and most cannot be corrected again saying no permissions to make changes

10. A number of new features required new settings choices - battery usage by app, etc., but that's OK. This is expected.

11. 30GB of old data retained for 10-30 days in windows.old while the opportunity remains to revert. A good thing, but worth noting.

12. Added some things of yet unknown value such as Mixed Reality and Paint 3D. To be investigated.

Might be more. All I have noted so far. And, restart takes much longer as it shuts down and restarts. Unsure why.

~Bob

Answer:My 1709 Fall Creators Update Broke and Reset Mny Things

Originally Posted by rebop


5. Removed all prior system restore points!!!



It has to - none of the previous restore points can be applied to a completely new OS as they contain files from the old system.





11. 30GB of old data retained for 10-30 days in windows.old while the opportunity remains to revert. A good thing, but worth noting.



It's 10 days since 1607 (it was 30 up to 1511). You can delete it earlier if you want.

Delete Windows.old Folder in Windows 10






...And, restart takes much longer as it shuts down and restarts. Unsure why.



There's a new feature in 1709. Certain apps that can register to do so will be reopened at the next boot if they were open when you shut down. It seems that it's saving/restoring the required data that takes the extra time (even if you had no apps open).

IE, Chrome, MS Office, Wordpad and Task Manager are some of the app that will reopen at startup. Edge, Firefox and Notepad are amongst those that don't. There are alternative ways to shut down that don't use this feature...







Originally Posted by Bree


...It appears that for the Fall Creators Update Microsoft have chosen to boot this way when using Shut down or Restart from the Start Menu.

Workarounds have been found, Alt-F4 on the desktop still shuts down the old way. Shortcuts using the shutdown command can also be used. My preferred meth... Read more

4 more replies
Relevance 80.91%

Hello
How to turn off driver update via regedit ?

os windows 10 fall creatros update 1709

Thank you

Answer:Disable driver update regedit - 1709 Fall Creators Update

Hello bordo, and welcome to Ten Forums.

If you mean for Windows Update, then you could use option 2 or 4 in the tutorial below to do so via registry.

Enable or Disable Driver Updates in Windows Update in Windows 10 Windows Update Activation Tutorials

more replies
Relevance 80.33%

Tried a few times to install the 1709 creators update.

After configuring the update and restarting I get a
system thread exception not handled error.

In the end Windows restores the previous version.

Obviously it leaves me puzzling as to what might have caused the issue.

Will let it rest for a while.Probably the only way is to do a clean install (reset) which requires a lot of time on installing the applications...

Is there a way to do a kind of 'pre-scan-tool' that checks if everything is okay/1709 compatible or something?

Thanks.
=

More replies
Relevance 80.33%

The Verizon WWAN connection works if no Ethernet present and Wifi is off.
Plug in Ethernet cable (static or dhcp to non internet router) and the Cellular connection changes to private so we lose internet. If I turn on wifi and connect it to a non internet router - then the Celllular connection is used. We need to keep wifi off though.
How can I prioritize the Cellular over Ethernet when wifi is turned off? The setup is Panasonic toughpad connected to Verizon for wireless messaging to a server, while connected via Ethernet cable static IP to router that has a private netork to a phone. This worked up to the 1709 Creator's update. How can it be made to work again?

More replies
Relevance 80.33%

The threshold for battery charging is not respected anymore after the Windows 10 upgrade. 

More replies
Relevance 80.33%

I am planning to update my windows 10 system to fall creators update (1709) but i am not sure whether the KIS is compatible with this version of windows 10 (1709).

KIS version currently installed on my system:- 18.0.0.405 (d)
 

Answer:Is kaspersky Internet Security fall creators update(1709) ready?

Devilish said:


I am planning to update my windows 10 system to fall creators update (1709) but i am not sure whether the KIS is compatible with this version of windows 10 (1709).

KIS version currently installed on my system:- 18.0.0.405 (d)Click to expand...

Yes it is compatible!!!
@harlan4096 in this post:
Update - Patch D for KAVKISKTSKFA 2018 / KSeC 2.0 / KSC 1.0beta
The patch is being gradually released.

More info: Patch D for version KIS/KAV Version18.0.0.405, Tech Article.Click to expand...


 

3 more replies
Relevance 80.33%

I recently updated to Windows 10 build 1709 known as the fall creators update.  Since applying the update fast startup/shutdown no longer works.  I have reinstalled the latest power management driver just to be sure but it still exhibits the same behavior.  With fast startup enabled in power options when I tell the system to shutdown it simply logs out and will not power off.  The only way to get it to power off is to disable fast startup in the power options.  Annoyingly it re-enables itself after every cumulative update. Any ideas?

More replies
Relevance 79.75%

Hello, I'm thinking to buy ThinkPad Sierra Wireless EM7345 4G LTE Mobile Broadband FRU: 04X6014 for my ThinkPad X250. I?ve few questions, Pease suggest ...1. Is it really any good and practically beneficial?2. Can I use it on Fedora 27, How?s Linux support?3. X250 has two PCI Express M.2 card slot and one is already occupied by WLAN Card and other slot is available, Can I use empty slot for FRU-04X6014?4. Can I use both WLAN and WWAN simultaneously?5. What is the impact on battery (Windows and Linux)?6. Is AliExpress a good place to buy? Thankyou  

Answer:Sierra Wireless EM7345 4G LTE Mobile Broadband FRU: 04X6014 for my ThinkPad X250

Regarding your questions:1) I personally use it and it's really good, as I don't want to use additional USB modem or WWAN wireless router.2) Can't say, as I don't use Fedora.3) There's a dedicated port for this module. Please make sure, that you have an antenna connectors for module and adapter for a SIM card. Moreover, instead of WWAN module, you can install there a m.2 2242 SSD disk.4) Both can be enabled and connected, but application will use one at time.5) I have an extended battery, so it's hard to tell. I guess it have a simmilar power usage as WLAN module (basing on Windows power utilization). Can't say about Fedora.6) It you don't want to have a problem with whitelist (it prevent system from booting, when unauthorized module is installed), then I look for module on eBay. Make sure, that photos explictly show FRU PN: 04X6014 on module's label. Models without it will not work.

1 more replies
Relevance 78.88%

After updating system to Fall Creators Update of W10 (1709) Dolby Digital Plus App  is reported to be deactivated /deinstalled due to driver incompatibility.
(It appears that driver/ app came with PowerDVD 12 preinstalled.)
 
Manual start of Dolby App shows that driver version installed is higher than expected by app (see screenshot).
Can some resolve driver/app problem, so I can use app again.

More replies
Relevance 77.43%

Only Games Tab is working, also my Desktop and Laptop are not working after the update. If I create a new user it works fine.....

It happens on both laptop and desktop so it must be a settings or something with upgrade. I don't know..
It tried all DISM command, SFC /Scannow . Store repair, Store clean Cache. but again , new user is working fine on both.

Do you also have issue with STORE ? I'm having issue on both Desktop and Laptop ... so it's not because of software I'm using. I did an Upgrade on both.Can you see the Home/Apps tab properly without grey squares ?

If I create new USER / ADMIN , it works fine .. is it some kind of setting in windows I might disabled ? because on the created account everything is enabled in privacy and others. what setting could make ?

Answer:Windows 10 1709 Fall Creators STORE not working

I've found the fix !

Yes !! I've found the STORE issue with grey squares.The only thing that was different with the other user that it was in FULL HEBREW. now on my main account I'm using it all ENGLISH . so it seems that it can't work with HEBREW + ENGLISH Mix. like Region Israel/Hebrew and Language English !

For example it doesn't work when
Region Format Hebrew ( Israel )
Location Israel
Current language for non-Unicode programs English ( United States )

Also on Languages English United States on TOP
Hebrew on Bot

It does work when I choose some of them as English or hebrew and Hebrew on TOP before ENGLISH

https://i.imgur.com/EM4qf4z.jpg

https://i.imgur.com/sednllU.jpg

1 more replies
Relevance 77.43%

Only Games Tab is working, also my Desktop and Laptop are not working after the update. If I create a new user it works fine.....

It happens on both laptop and desktop so it must be a settings or something with upgrade. I don't know..
It tried all DISM command, SFC /Scannow . Store repair, Store clean Cache. but again , new user is working fine on both.

Do you also have issue with STORE ? I'm having issue on both Desktop and Laptop ... so it's not because of software I'm using. I did an Upgrade on both.Can you see the Home/Apps tab properly without grey squares ?

If I create new USER / ADMIN , it works fine .. is it some kind of setting in windows I might disabled ? because on the created account everything is enabled in privacy and others. what setting could make ?

Answer:Windows 10 1709 Fall Creators STORE not working

I've found the fix !

Yes !! I've found the STORE issue with grey squares.The only thing that was different with the other user that it was in FULL HEBREW. now on my main account I'm using it all ENGLISH . so it seems that it can't work with HEBREW + ENGLISH Mix. like Region Israel/Hebrew and Language English !

For example it doesn't work when
Region Format Hebrew ( Israel )
Location Israel
Current language for non-Unicode programs English ( United States )

Also on Languages English United States on TOP
Hebrew on Bot

It does work when I choose some of them as English or hebrew and Hebrew on TOP before ENGLISH

https://i.imgur.com/EM4qf4z.jpg

https://i.imgur.com/sednllU.jpg

more replies
Relevance 75.69%

Hi all,

I have big problems with the new MS update which prevents me from installing updates or drivers.
It seems that MS has a mind of its own because whenever i install newer drivers it keeps saying that older drivers are installed in device manager..

This is what i mean:

As you can see the driver simply won't update in device manager no matter what i do..
Same as for Realtek audio drivers, i donloaded the newest from MS update but i can't install it and see; "the best drivers are already installed for your device"

Is my Windows corrupt or went bad or something or am i overlooking something? I ran sfc /scannow and found nothing, DISM also didn't find anything but repaired the image anyway.

Plz help me with this as this frustrates me beyond belief..

Thank you in advanced,

Hurricane28.

More replies
Relevance 99.22%

Sorry if I've posted in the wrong place, and thanks in advance for your help.
computers are dell inspiron laptops, i7 processors, less than a year old, updated to fc.

First a suggestion: is there a single thread for problems with major Windows updates, like the fall creators? It would be a lot easier to search one thread instead of wandering from one to another looking for a solution to a problem.

The issues:
i'm probably missing a setting, but can't seem to find it. prior to update if i browsed the new posts here and found one of interest i could click on it and it would open in a new tab, preserving my location in the new posts listing. now the clicked thread opens in the same window. how can i fix that? I've checked the option to view new processes in a new window but that didn't do it.

My friend has two monitors. he says that he browses his email on one (em client) and wants the link to open in his browser (edge) on the other. seems it worked previously that way, now opens on the same monitor. if he drags the browser window to the other monitor, then closes it, it sometimes re-opens there, sometimes not. How to fix that.

i have also run into times when clicking a link in an email opened an edge window, but it was completely blank, including no control boxes to shut or minimize, and even the icon on the task bar doesn't close it down by right clicking and close or "x". had to revert to task manager and end the process. Anyone know the cause ... Read more

More replies
Relevance 99.22%

I recently installed the new Fall Creators Update, and right after, I have been having some weird issues that I'm not happy about, and quite frankly, I want to uninstall the update because of it.

1) My EasyMail for Gmail app stopped giving me notifications for new mail. I've tried everything including uninstalling it and installing it again, clearing the data, etc. I've never changed any of the notifications settings in Windows Notifications settings or within the app itself, and after double-checking, they're all selected perfectly to allow notifications.

2) Start-up of my computer is much slower, especially after powering off totally for several hours, but during this slow start-up, what really irks me is the fact that Windows is changing my Lockscreen image to the default image that used to appear when I first got my Windows 10 computer. And yes, even going into Settings for the Lockscreen image, the one I have chosen to appear is still selected.

The weird thing is this. If I just reboot my computer (restart) or shut it down totally and the power it up via the power button shortly after the shut-down, the desired Lockscreen image that I have selected is displayed (start-up process is quicker too). However, if I shut down my computer for the night, and then several hours later I turn it back on, this is when I get the issue of Windows changing my Lockscreen image to the default one, along with the much slower start-up.

I have to point out also, that when I am ... Read more

Answer:Fall Creators Update Causing Issues

Hi FullGrown Nut.

First to address the power on slow boot I would recommend you try this. Right click on Start, the either Command Prompt(admin) or Powershell(Admin)

powercfg -h off

The start screen issue is a bug. Several threads on issue, three that I been on. There was a registry fix that sort of solved things. I will try to find.

For gmail, I use chrome and I added a little extension to tell me to look. I will find name. This at best is a work around.

Ken

0 more replies
Relevance 99.22%

I am really getting pissed off having to deal with the issues every day since the update. Sometimes I can't go fullscreen when watching youtube. That issue is related to the task bar refusing to act right. Another issue is right clicking on desktop or taskbar or menus might not work or is sluggish as hell. Sometimes I can't even open Edge browser or it takes literally minutes to open and just displays a grey screen. Half the time I can't even make any settings changes or even get to the settings in the first place.

Restarting always fixes the issues but even restarting can be randomly slow as hell. And nearly every time I am having issues this is what it shows when I click on restart.
 

More replies
Relevance 99.22%

Hey there,
I have two issues with the Fall Creators Update that affect day-to-day experiences. One is fixable, and one isn't.
Fixable:
The Fall Creators Update includes improvements to the Hyper-V virtualization package, notably a new virtual network adapter that can not be permanently disabled nor deleted. When this adapter is enabled, it is always connected to the "Unidentified Network." I've noticed that when this adapter is enabled, my laptop waits a prolonged period (> 1 minute) to go to sleep mode when the lid is closed. When I disable the virtual adapter through network connections, my laptop takes less than 30 seconds to go to sleep mode in the same fashion. The next time the laptop boots, the virtual adapter gets automatically re-enabled. It seems that this virtual adapter is keeping the computer from sleeping, at least temporarily. The only fix that eliminates this issue is to remove Hyper-V from the system from the Add/Remove Windows Features panel.
Unfixable:
Whenever I boot up my laptop, I am presented with the Lock Screen followed by the Sign-In screen. Even when I don't enter my password, I can hear notifications being executed on my user account's desktop (such as the Network Drives Cannot be Reconnected notification). This is extremely worrisome because it is almost as if I am logged in when I am not. It seems like a massive security hole. The worst part is that Patch Tuesday didn't fix this problem (and I would think that this issue would be at the top of... Read more

More replies
Relevance 99.22%

I finally got the "Fall Creators" update a few days ago. So far everything seems to be working fine with two small exceptions:

1) I can no longer minimize games with the Windows key on the keyboard. A lot of games used to seamlessly minimize to a smaller window (such as BF4/1) so I could quickly do something on the desktop and then click on the game window to maximize to full screen again. Is there any setting that the update may have changed which would effect this?

2) Each time I restart Windows it Windows Defender pops up in a window. Not much of a problem but I don't see the need for it to pop up each time I restart Win 10 to tell me that my device is protected. Just another pointless click to close. Any work around in Defender settings to make it not popup at startup?
 

More replies
Relevance 98.4%

I came across this new behavior a couple days ago and thought I did something screwy to my image. I read Bree's post and found it's an intended feature now on a restart Fall Creators Update reopens apps from before

That thread has some good suggestions for alternate shutdown methods. The intention of this tutorial is to restore pre-1709 (like) functionality to the normal Restart and Shut down buttons in the Start menu.

Since the default reboot behavior uses the shutdown.exe slash G switch - applications that are left open will attempt to "register" themselves to be re-opened. This is done by creating a RunOnce value at logoff, so you won't see it while online. Not all apps are capable of registering themselves in this way and can't be re-opened automatically.

In the below screenshot I have left a few programs open, shutdown the computer, then booted to WinPE and loaded my HKCU hive in regedit. You can see the apps that are going to be re-opened once I boot back up, each named like "Application Restart".


The script below will remove every value starting with "Application Restart #"

Code:
$HKCURunOnce='HKCU:Software\Microsoft\Windows\CurrentVersion\RunOnce'
(Get-ItemProperty $HKCURunOnce).PSObject.Properties |
Where-Object {$_.Name -like "Application Restart #*"} |
ForEach {Remove-ItemProperty -Path $HKCURunOnce -Name $_.Name}


You can set this as a user logoff script in gpedit or gpmc, or use the attached scripts:... Read more

More replies
Relevance 97.99%

Anyone else having any issues with build 16299.19? I did a clean install and have had several issues now. Just for instance I cannot install the nvidia drivers, xbox one does not stream to my desktop, and windows says my driver for my corsair h100 v2 is not signed. I have downloaded all the latest drivers directly from the manufactures websites.
 

Answer:Fall Creators update issues (clean install)

Did You do this clean install with net connected ?
 

0 more replies
Relevance 97.99%

Hi everyone, As probably most of us have, I recently updated my Yoga 910 with the Windows 10 Creators Fall edition to try to solve the constant fan noise and heating issues of the previous build. The new update solved these problems, but now I'm having severe boot issues. Either from hibernation or start up the screen stays black and the keyboard blinks on and off until after a really long time I get the Lenovo boot screen. Can somebody help me, I´m starting to loose it because I really need the computer for work and cant afford for it to loose my data. Thanks

More replies
Relevance 97.17%

So I never had any real issues with my internet connection before this update, that's why I guess it's not my ISP or my powerline adapters.
The problem I have is that at some point, Windows thinks I lost internet connection, even though my powerline adapter is showing that there is internet signal coming to my PC. Browser sometimes works slower when this occurs, Steam however still thinks I am not connected to the internet and even if I kill the process in the task manager and launch steam again, it won't work. I tried re-installing LAN drivers for my motherboard and it didn't fix anything and I am on the last cumulative build from this week.
Does anyone know how to fix this? If I don't find a fix within a week, I will just go ahead and install Windows 8.1 and enjoy the bugless experience.

More replies
Relevance 97.17%

I've got old 1.1 firmware and because of that (dis-)connecting issues.Using the newest drivers from lenovo (02-2016) I followed the instructions from:http://zukota.com/sierra-wireless-em7345-how-to-flash-the-latest-firmware/#comment-20191) edited the config.xml:<?xml version="1.0" encoding="UTF-8"?>
<Config>
<EmailTo></EmailTo>
<EmailSubject></EmailSubject>
<!-- Location of where the firmware database is located. -->
<CustomFirmwareDatabase></CustomFirmwareDatabase>
<!-- 0 - turn off Application logging. 1 - turn on Application logging -->
<AppLogging>1</AppLogging>
<!-- Max size for debug logger file -->
<AppLogSize>4096000</AppLogSize>
<!-- Resource file with translated string table -->
<ResourceFile>Resource_en-us.xml</ResourceFile>
<!-- Silent Auto Firmware Update -->
<SilentAutoFWUpdate>false</SilentAutoFWUpdate>
<!-- Prompt Silent Auto Firmware Update failures, this configuration is only applicable if 'SilentAutoFWUpdate' is true -->
<PromptForSilentAutoFwUpdateFail>true</PromptForSilentAutoFwUpdateFail>
<!-- Enable Firmware System Tray. Default is true to enable -->
<FirmwareSysTray>true</FirmwareSysTray>
<!-- Enforce module compatibility -->
<EnforceModuleCompatibility>true</EnforceModuleCompatibility>
<!-- Added new parameter to update firmware at time of Add --&g... Read more

More replies
Relevance 95.94%

I just updated a T560 to Windows 1709. Intel Management Engine Interface won't start (Code 10)STATUS_DEVICE_POWER_FAILURE The Intel WLAN card won't come up either or completely disappears from Device Manager.Rebooting the notebooks sometimes results in a BSOD (something power related) I did a complete clean install and ran into the same issues again (with only the drivers Windows 10 installed automatically) . It was working fine before with Windows 10 1703. And ME Interface was working for some minutes after the clean 1709 install. Maybe another driver which got installed later by Windows killed it?

Answer:T560 Fall Creators Update ME Interface and WLAN issues and BSODs

crashed again on reboot with DRIVER POWER STATE FAILURE

1 more replies
Relevance 95.12%

I am looking for a practical way to upgrade firmware of Sierra Wireless EM7345 on a system without Windows. Either a Linux tool or something that could be booted from USB drive would do.

Answer:Sierra Wireless EM7345 firmware update w/out Windo...

talk to the zukota guys.

2 more replies
Relevance 93.89%

my 320-15IKB (Type 80XL, 80YE) Laptop (ideapad)   type 80XL00HVADafter i make computer reset always make trouble , windows update error message "There were some problems installing updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x800705b4) "and when shutdwon or resart take about two hours to work again and i tried to stop update service and rename softwareDistribution folder give acces is denied till i change permission ,  

Answer:windows 10 Fall creator 1709 update fail

Fiablecleantech stands tall as the reputed Supplier of a defect-free product range. The variety of product Housekeeping Tools Provider, dustbin and home carpet in the reasonable prices.http://www.fiablecleantech.com/


























fjj.PNG ?247 KB

1 more replies
Relevance 91.84%

After installing Full Creators update 1709 in Windows 10 64 bit Prof. in the laptop HP EliteBook 8540w, the logon screen appears without the text box where to enter the password. Only after about half an hour appears this text box and Windows 10 can be started. We have returned to the previous update and installed again the 1709 update, but the problem appears again.

[Moreover this update marks the checkbox labeled "turn on fast startup" (in: Power Options, choose what the power button does, change settings that are currently unavailable), which prevents Windows 10 to shut down.]

Thanks for any help you can give.
 

More replies
Relevance 91.43%

As with the Creators Update, the key to our phased approach is actively listening to all available feedback mechanisms and making the appropriate product updates during the rollout. This allows us to provide a high-quality experience for the broadest set of users at an accelerated rate, while also continually increasing the quality and security of Windows 10. This was our approach with the Creators Update released in April and user feedback on this approach was very positive.

For the best experience, we recommend you wait until Windows 10 is automatically offered to your device. You don?t have to do anything to get the update; it will roll out automatically to you through Windows Update if you?ve chosen to have updates installed automatically on your device. Once the download is complete and the update is ready to install, we?ll check with you, so you can pick the right time to finish the installation and reboot. We do this so we can ensure the update does not disrupt you, and we use active hours to help suggest a good time.

If you don?t want to wait for the update to roll out to you, you can manually check for updates on your personal PC using the steps below. This will only work if your device is eligible to get the Fall Creators Update as part of the initial roll out phase. Alternatively, you can manually get the update today via the Software Download Site. This option is only recommended for advanced users on devices running a licensed version of Windows 10. If ... Read more

More replies
Relevance 91.43%

I would like to comment on the Fall Creator's Edition Update of Windows 10!  This has to be one of the biggest disasters that Microsoft has ever accomplished.  As one can see from the various problems encountered after the install this update was not well designed, was not thoroughly quality controlled and now has the support staff scrambling to figure out how to answer all of the issues that it caused.  Here is my list of issues after the update:  Mail and Calendar programs missing from Start Menu, Control Panel Apps shows them to be installed but I cannot add to start menu and cannot start either program.  Several other Apps also missing from Start Menu including Amazon, Adobe Reader and most other third party Apps but also several more Microsoft Apps or Windows Programs.  Files missing:  Somehow during the install Microsoft decides to remove the pointers from the Pictures and Documents folders so that it appears all previous files in these locations are lost.  By navigating thru Users...Documents I was able to retrieve all of the files but how many novice or new users are going to know how to do this type of trouble shooting?  This is a bonafide nightmare for Microsoft and takes me one step closer to trading in all of Dell computers for Macs!  It cannot possibly be worse than two days of troubleshooting and researching how to get back to the same functionality I had before installing the latest Windows 10 Update!  ... Read more

More replies
Relevance 91.43%

Releasing today!



This week, Microsoft will begin rolling out its fourth feature update for Windows 10. Unlike its predecessor, however, the Fall Creators Update is a fairly substantial upgrade that should offer useful improvements for just about anyone.Click to expand...

https://www.thurrott.com/windows/windows-10/141660/comes-windows-10-fall-creators-update

https://www.microsoft.com/en-gb/windows/upcoming-features
Heres a comprehensive list of whats new, expand it to see it all, it a long list.




What's new/changed in Fall Creators update
Start

"Turn Live Tile on/off"-option now has an icon
Start now uses the new scroll bar style introduced in the Creators Update
All items that do not have a submenu in the app context menus now have icons
Start no longer uses its own blur, but instead uses acrylic
The bottom of the start frame will no longer glitch when resizing vertically
Instead of snapping into size, the start frame now resizes immediately when resizing horizontally
The start menu can now be resized diagonally
The transition between the start menu and start screen is now smoother
"Update and shutdown" has been removed due to not working properly
When pressing a tile, the context menu will now appear prior to lifting your finger again
Cortana + search

Cortana can now be set to open with cards visible instead of the home screen
Cortana can now be kept from showing your content from the cloud in search results
Web results... Read more

More replies
Relevance 91.43%

I previously had Windows Movie Maker 12 and Windows Photo Gallery on My Dell Insperion 5555 that had Windows 10 latest updates 1709 build installed.  Now was uodated to Fall Creators Update and those two proprams are gone. ?    Can I get them back somehow?

More replies
Relevance 91.43%

I just downloaded the above mentioned update and it looks like some fun things are here. I am interested in giving "Paint 3D" a shot although I am told it's designed for touch screen and I don't use one.
Here's the problem---it has force fed me "OneDrive" which I am not a fan of...it's too obtrusive and even wants me to save everything I do to it.
QUESTION: Is there a way to get it off my computer....NOT turn it off or hide it, but, stop it from popping up every time I want to save something or its appearing in the shell.
I have my own cloud space I'm fond of I don't need another.
All of that said...preliminary observation says this update looks like fun.

Answer:WINDOWS 10 Fall Creators Update

Originally Posted by AFTommy


I just downloaded the above mentioned update and it looks like some fun things are here. I am interested in giving "Paint 3D" a shot although I am told it's designed for touch screen and I don't use one.
Here's the problem---it has force fed me "OneDrive" which I am not a fan of...it's too obtrusive and even wants me to save everything I do to it.
QUESTION: Is there a way to get it off my computer....NOT turn it off or hide it, but, stop it from popping up every time I want to save something or its appearing in the shell.
I have my own cloud space I'm fond of I don't need another.
All of that said...preliminary observation says this update looks like fun.

1 more replies
Relevance 91.43%

Does the ISO version include the Fall update?
Download Windows 10

Answer:Windows 10 Fall Creators Update - ISO available?

Hello, and welcome to Ten Forums.

Yes the Windows 10 Fall Creators Update ISO file is available to download from Microsoft now.

Download Windows 10 ISO File Installation Upgrade Tutorials

5 more replies
Relevance 91.43%

Hey.i was just wondering.how come I haven't got the new creators fall update???I went to download it manually but on the website there only is the creators original update

Answer:windows creators fall update

It's not available until 10AM PT.

How to get the Windows 10 Fall Creators Update - Windows 10 Forums

1 more replies
Relevance 91.02%

My Windows installed some updates today and after it I have problems with my display. Log in screen is perfectly fine. After I log in it is fine for a sec and then it turns pink and dark areas turns green. I tried to rollback this update but nothing changed.
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 
 

Answer:Ideapad 310 15 - Pink screen after log in with Windows Creators Update 1709

This is video what is going on. My son can login OK. After I logged in I get a pink screen.
 
Image link removed
 
Mod's Edit: Link to images removed.  Please post the images on a sharing website that does not require a log in account and can be freely accessed.  Thanks!
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

5 more replies
Relevance 90.61%

Spoiler (Highlight to read)IMPORTANT!!IMPORTANT!!Friends from Lenovo,Yesterday I did the update to the new version of Windows 10, called Windows 10 Fall Creators Update or Windows 10, version 1709, and after the update was done I find out that the hotkey driver, that controls the Fn commands on the keyboard of my Lenovo ThinkPad X220, doesn`t work correctly with this new version of Windows 10. Therefore, I would like to know what can I do to fix this issue, so the hotkey commands work properly again in my notebook, or if it is going to be an update of this file (8jvu43ww.exe) that I could install in my notebook to fix this issue. Could you please tell me what can I do to make the Fn commands work properly with the new update of Windows 10 (Windows 10 Fall Creators Update) or if it is going to be an update of the hotkeys that is compatible with the new version of Windows 10?I look forward to hear your comments, and I hope you already have an idea, an answer to solve this issue. Yours truly,Cristián Palau

Answer:Lenovo ThinkPad X220 Hotkey Update for Windows 10 Fall Creators Update

Intel 2nd gen CPU machines are not supported in Windows 10. 3rd gen (X230) is the first one.





__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind

1 more replies
Relevance 90.2%

Hello,
After updating Windows I think that EAM is not well detected by Windows Security Center ?
What do you think ?



 

Answer:Emsisoft and Windows Fall Creators Update

Yeah, it has status unavailable but at least WD is still getting disabled.
 

3 more replies
Relevance 90.2%

Windows 10 Fall Creators Update Reaches RTM

Microsoft has completed development of the Windows 10 Fall Creators Update, with the official release to take place as planned on October 17.

The company today shipped Windows 10 build 16299.15 to insiders in the Fast ring, and according to reports, this is the RTM build of the Fall Creators Update that everyone will get later this month.

The only difference is that Microsoft will continue to service (to improve) this particular build with more cumulative updates, and this means that insiders will be provided with several patches in the coming days until October 17.

Microsoft has promised to confirm when the RTM build is compiled, so an announcement in this regard is expected anytime soon, especially because the company is also likely to start pushing smaller patches to devices enrolled in the Insider program in the next few days.

No word on the mobile release just yet
For the time being, no stand-alone ISOs are available for insiders, but once the very same build is released to the Slow ring, such media should also be released for those who want to perform a clean install. Additionally, this build should also make it to the Release Preview ring in the coming weeks.

Of course, whoever wants to clean-install build 16299.15 can build their own ISO, though this requires additional steps. Learn here how to build your own Windows 10 ISO.

Now that Windows 10 Fall Creators Update is close to getting the final go-ahead, insiders in... Read more

More replies
Relevance 90.2%

With the Windows 10 Fall Creators Update, we are introducing some fun, new ways to get creative ? from bringing mixed reality and 3D to the masses, to faster broadcasting for gaming, to turning photos and videos into real memories, and so much more. The Fall Creators Update can be experienced on a wide variety of Windows 10 PCs and on a range of Windows Mixed Reality headsets.

You can get the Fall Creators Update in a few different ways. If you already have a Windows 10 PC and have automatic updates enabled, the update will be delivered to you when it?s ready. If you are an advanced user and would like to get the update manually, visit this blog post to learn how to get the Fall Creators Update.

Here?s what?s new in the Windows 10 Fall Creators Update:

Windows Mixed Reality


With Windows Mixed Reality, you can escape to the most immersive experiences ? touring top travel destinations, getting inside the most exciting games, attending the most popular events, even travelling across time and space ? right in your own home, with you at the center of everything.

Amazing experiences don?t need to be expensive or complicated. All you need is a headset and a compatible Windows PC. And, to enhance your experience, try out the extras like headphones and advanced motion controllers. A variety of headsets and motion controllers are available from leading makers like Acer, Dell, HP, and Lenovo. Headset-motion controller bundles start as low as $399. Check here to see... Read more

More replies
Relevance 90.2%

My internet data is limited to 1GB/day. Although Microsoft providing Windows 10 FCU iso and its link valid for 24 hours only, unfortunately i can't proceed with that one.
Now i found esd file to update windows 10 FCU from CU. Here is the link, [link redacted]
It it good download from that site. Thank you in advance..

Answer:Is it safer to download ESD file to update to Windows 10 Fall creators update

What kind of trouble are you having downloading the link from Microsoft?
I deleted the link because it's not a good idea to download the link from a third party when Microsoft itself publishes the files. It's extremely difficult to know for sure if any third party is adding malware or something else into the files.

2 more replies
Relevance 90.2%

In Trainwreck of errors related to seemingly-normal Win10 updates - help! Solved - Windows 10 Forums I posted of my confusion, a problem now solved, about an ASUS laptop that came with Windows 10 installed suddenly being unable to download and install updates. "Net" of that was the computer needed a BIOS update, and once the shop did that, they were able to update Windows.

Problem solved... almost.

Today, my wife, who uses the laptop, was freaking because all of her documents were "gone."

I knew this wasn't the case, and with some looking, I found that the user accounts from the computer, pre-1709, were now in a folder called "Users_old" (D:\Users_old). A new "Users" folder was created with the 1709 update. That folder contains one folder for my wife (since it was her account logged in when the update was done), and that folder contains one "Documents" folder that was created when she tried to access her documents from the desktop "My Documents" shortcut that points to D:\Users\[wife]\Documents

I have read that the "Windows_old" folder is automatically removed after 10 days in a situation like this.

What happens to "Users_old?" THAT is the valid folder containing the files for my wife, and others who once had accounts on the computer.

Do I rename "Users" (the useless users folder created at the 1709 update) to "Users_New" and rename "Users_Old" to "User... Read more

More replies
Relevance 90.2%

How to flash the firmware of the sierra wireless em7345 on windows 10 ?  Its not possible through the steps i could find which was only for widnows 8. 

Answer:Sierra Wireless EM7345 windows 10

HiOnce the modem drivers are installed, including Intel flash tool, and the sim card inserted, during laptop cold start the flash service checks out whether newer firmware is available according to current modem fw and the sim card data (more clearly, cellular operator MCC/MNC values), and performs the flashing process if it's needed, in auto mode. You should see appropriate notification from the flash service in the system tray.

2 more replies
Relevance 89.79%

I know that you can still update manually but I think it is strange that my main PC hasn't received the update yet while my laptop has.
 

Answer:Anyone else that hasn't received Fall Creators Update yet via Windows Update?

Windows 10 Fall Creators Update phased rollout approach - Windows Experience Blog

You better wait

The company recommends users to wait for the Fall Creators Update to be offered via Windows Update, though there?s no estimate as to how much this wait could last as it all depends on the number of bugs and issues that the company finds in the new OS version.Click to expand...

You might not have been offered the upgrade, because of the software/hardware you have. Like AMD causing black screen during boot.
 

3 more replies
Relevance 89.79%

After Windows 10 Fall Creator Update (1709) through Windows Update, my ThinkPad Yoga X1 (Gen1) have issue with driver - Intel(R) Management Engine Interface , latest driver 11.7, ,This device cannot start. (Code 10)STATUS_DEVICE_POWER_FAILURE In Windows Event log it says something about firmware connection not good (firmware of ME is also at the latest) Tried install / uninstall, delete driver, etc. no progress, same issue. Any idea? Thank you 

More replies
Relevance 89.38%

Hello everyone!

So a couple of weeks ago (I think) I decided to install the Fall Creators Update on my computer. It was already running Windows 10 and everything ran fine. However, when the update installed and the computer rebooted, the Wi-Fi adapter wasn't working. It is an ASUS PCE-AC68. It is worth noting that my setup consists of a small SSD with Windows installed and then a large HDD with all my files on it. There are several directory junctions for certain programs and the Users folder pointing to the large HDD. Just mentioning this in case it's got something to do with this...

So I started looking into it and device manager throws an error saying Code 10 This device could not start. Then on the line below it says The requested operation as unsuccessful. (I'm getting this from my memory, I'm out of town atm) I tried using newer or older drivers from ASUS and Broadcom and none of them work but still throw the same exact error. Any ideas on this?

To further troubleshoot this issue I fired up an Ubuntu Live USB Stick and used that Wi-Fi adapter and it ran just fine. So I know it's something within Windows. I've been getting by with an old D-Link USB adapter but it is not stable so this is starting to become urgent.

Thanks!

More replies
Relevance 89.38%

Hi!
 
I receive constant BSOD's about every two days as "reliability history" shows. Today's one:
 
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff801e62c9eb0, 0xffffbc8a49d09a78, 0xffffbc8a49d092c0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 7bb943c3-b3ac-402b-8952-7bb7b9668f95. I upload the minidump if can help, maybe is a driver but I can't identify it. The Windows is a clean install not much 3rd party software on it, worth to mention "VMware 12" and "PGP Disk".
 
The minidump is here: https://drive.google.com/file/d/1oNg2_FjIozYUqZVOtweXhGbjsN9P0YDv/view?usp=sharing
 
I contacted Microsoft, no help as expected (https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/bsod-at-about-every-two-days-on-windows-10-fall/afccbe66-e733-4dc2-af9a-fdc79e66eca1)
 
"Reliability history" can prove:
 

 
NOTE:
My OS is: Microsoft Windows Version 1709 (OS Build 16299.192)
My laptop is: ASUS GL502VM-FY040T/I76700HQ/16/1+256/G (https://www.asus.com/us/ROG-Republic-Of-Gamers/ROG-GL502VM/)
I never overclocked it.

Answer:BSOD at about every two days on Windows 10 Fall Creators Update

Here are the instructions on how to post needed logs here. https://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/.
 
Also please Download and save Speccy from here. https://www.piriform.com/speccy/download/standard
• Navigate to the directory in which you saved the ZIP file.
• Right-click on the downloaded ZIP file, click Extract all, taking note of where the files will be extracted, and then hit Extract.
• Open up the extracted folder, right-click on Speccy64.exe (or Speccy.exe, if your system is 32-bit), and select Run as administrator. Please accept any User Account Control prompts.
• After waiting a while, click File, then Publish Snapshot.
• Hit Yes to the Publish Snapshot dialog, then click Copy to Clipboard. Paste the URL in your next reply.

3 more replies
Relevance 89.38%

1 day ago installed the Windows 10 Fall Creators update and now during bootup I get multiple Bad Image File messages for MSVCR110.dll and MSVCP120.dll.  These are mostly associated with Nividia and Synapse with an occasional reader.sl.exe.  Correcting this problem seems to be problematic.  The redistribute Visual C++ software comes from the same company that initiated the incompatability issue in the first place.  Removal and reistallation of the RZ Synapse is about an 8 step process that I have not tried yet.  If someone has experienced these issues and found a reasonable Fix please point me in the the general direction.  Y900 RE is my computer.

Answer:Windows 10 Fall Creators update and Visual C++ incompatability

I think you are more likely to find someone to provide the help you need on the Microsoft technet forums:
 
https://social.technet.microsoft.com/Forums/en-US/home
 

1 more replies
Relevance 89.38%

I have a RealSense F200 camera. Since I installed the FCU, I noticed Windows Hello stopped working.
Fails to inialize the camera on the login screen. It also fails the camera setup.
The camera works, as a webcam. What doesn't seem to work is the red light dot that used to light up when in use (ie, the IR camera).
The device admin in the control panel shows only a single camera. I don't remember well but I think it's supposed to have a separate driver for the IR part of the camera?
Anyway, did anyone get the same problem?

More replies
Relevance 89.38%

Update went flawlessly. But now many programs open more slowly (5 to 10 seconds vs. 1 second). When they open, you can't click on the menu for 5-10 seconds. Happens in many apps like UltraEdit, Nitro Pro, Paint Shop Pro, etc. Some other apps work fine (e.g, Firefox, IE, etc.) . And this is with my fast gaming rig 6700K with an SSD. There is something in the Fall Creators update that is causing some programs to start slowly and in some cases run slowly. I restored my Macrium Reflect backup Image. This is nonsense Microsoft. I will never install another OS update until it reaches Current Branch for Business (now called Semi-Annual Channel for some stupid reason) - about 3 months from now ( Windows 10 release information - current branch, build history ).
See: Slow and unresponsive windows 10 after Creators Fall Update - Microsoft Community

Answer:Fall Creators Update Bug - Slows Windows and Apps

What happened with resolving the issues before the update got pushed out? Only those who do tweaks and such are seeing major issues.

3 more replies
Relevance 89.38%

https://threatpost.com/say-goodbye-to-smbv1-in-Windows-fall-creators-update/126387/

The crusty SMBv1 file-sharing protocol, abused by a NSA exploit last month that spread WannaCry, will be removed from Windows 10 starting with the upcoming Redstone 3 update.

?We can confirm that SMBv1 is being removed for Redstone 3,? a Microsoft representative told Threatpost.

Redstone 3, a code-name for the Fall Creators Update, will begin the phasing out of SMBv1, a plan that reportedly has been in the works for years and is not a reaction to the EternalBlue exploit, nor WannaCry. It is due in September.

SMBv1, short for the Server Message Block protocol, provides shared access to Windows file and print services on a local network. Attackers believed to have ties to North Korea used the EternalBlue exploit, leaked in April by the ShadowBrokers, to spread the ransomware worldwide on May 12. Hospitals in the U.K., giant telecommunications providers across Europe, and many businesses in Russia and across Asia fell victim to WannaCry, which eventually infected unpatched Windows servers running SMBv1 in more than 150 countries.
Microsoft had patched the SMBv1 vulnerability in question in March in MS17-010, one month before the ShadowBrokers? leak, and urged admins worldwide to install the patch immediately. The WannaCry outbreak, however, demonstrated that many organizations did not heed those warnings; the ransomware, generally derided for its shoddy coding, still managed to infect... Read more

More replies
Relevance 89.38%

Hi,

Found the following bugs in v1709.

1) The Windows Push Notification System Service now defaults to 'automatic' instead of 'manual'. If you set the startup to 'manual' and reboot, any newly created accounts will have a non-functional Start Menu.

2) Software Restriction Policy now extends BAT file restriction to local group policy ( gpedit.msc ) 's logon/logoff script settings. That means you cannot no longer use a bat file for logon/logoff scripts if SRP is active. You can always remove the BAT extension from being covered by SRP, but that would decrease security.

3) Software Restricion Policy's Enforcement section: if you specify SRP to cover 'all software files'; meaning it covers DLL files as well as EXE, then MS Edge will crash. (this bug actually started in v1703, but is still not fixed)
 

More replies
Relevance 89.38%

I plan to do a clean install, can I use a Windows 10 Insider Preview or a Windows 10 Enterprise Evaluation to activate the official key? If not, what are the other ways to get a copy of the ISO?

Answer:Windows 10 Fall Creators Update Enterprise ISO and activation

The vast majority of Enterprise installs will be VL activated as they are designed for use in an enterprise location using Licence servers, there are some Non VL versions available and the ISOs are available from the vendor of the Key, Indeed no official vendor should be supplying only a key excepting Microsoft who supply downloads and MAK keys as part of the MSDN service and these are tracked and any unauthorised usage will result in the withdrawal of the licences The insider and trial versions have expiration dates and are not designed to accept a key other than the default Key they are supplied with

1 more replies
Relevance 89.38%

Download Windows 10 Fall Creators Update ISO files (64-bit and 32-bit) Offline

Windows 10 Fall Creators Update 1709 (64-bit)
Windows 10 Fall Creators Update 1709 (32-bit)

 

Answer:Official Windows 10 Fall Creators Update ISO Files (32-bit / 64-bit)

I updated my two computers took about 5-6 hours on each. (My internet has been poor lately.) I don't see too much of a difference updating maybe a little bit of a resource impact but I am happy finally having it.
 

0 more replies