Computer Support Forum

VBA not working after update. Error during Load

Question: VBA not working after update. Error during Load

Yesterday, after a Windows update my CorelDraw vba macros stopped working; trying to run some of them gave me an "Error During Load" message; the others just didn't do anything at all. I had to uninstall the update, now everything is back to normal.

Windows 10 Professional
Version: 1703
Build: 15603.786
HP ProDesk 400
Intel i5-4670, 8GB RAM

Any help will be greatly appreciated. thanks

More replies
Relevance 100%
Preferred Solution: VBA not working after update. Error during Load

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 67.65%

Yesterday, after a Windows update my CorelDraw vba macros stopped working; trying to run some of them gave me an "Error During Load" message; the others just didn't do anything at all. I had to uninstall the update, now everything is back to normal.

Windows 10 Professional
Version: 1703
Build: 15603.786
HP ProDesk 400
Intel i5-4670, 8GB RAM

Any help will be greatly appreciated. thanks

More replies
Relevance 53.71%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 53.3%

I've been using Google Chrome because Edge doesn't work with all the companies I pay bills through. After today's update I can't load google except through Edge. Help!!

More replies
Relevance 51.25%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Answer:Can not load windows, update error to 8.1

What's the error he's receiving on boot?

5 more replies
Relevance 51.25%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.
 
I tried those commands from windows site
 
bootrec /fixmbr and other bootrec
 
and in config, 
 
ren system syste.001 this worked but
 
ren software software.001
 
this gave errorprocess in use, can not be accessed.
 
How can i rescue? I dont have any rescue disc or etc.
 
Desktop computer, 32 bit probably.

Answer:Can not load windows , update error to 8.1

Is the Windows 8.1 disc 64 bit version?  Either bad disc, or wrong version for what you have, and what he burnt to the disc.  I have run into where I have had to turn off Secure boot in the UEFI bios.  It helps to know what the manufacturer & model# of your computer that you have.

5 more replies
Relevance 51.25%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Answer:Can not load windows , update error to 8.1

Reboot then follow this guide. To get to the troubleshoot RE. How to use the Windows 8 System Recovery Environment Command Prompt In command prompt type in then hit enter.


Code:
rstrui.exe
Select a restore point to before you tried updating Windows 8 to 8.1.

1 more replies
Relevance 50.84%

I was manually installing service pack 2 on windows vista because i was told this would sort out my problem with not being able to do any auto updates, then it got to the stage where it shutdown and was installing 1/3 updates then when it got to the 2nd part it crashed and when i restart the laptop nothing happens at all, just a black screen, no boot menu options or anything like that. I dont have a vista disc or anything like that, does anyone have any suggestions as to how i can solve this problem, sorry if my explanation was short and not very detailed.

thanks in advance
 

Answer:Vista wont load after update error

Um, I believe you will need some kind of disk. Specifically, you'd need either the Vista disc or the ERD disc. You need to launch a repair on your OS, as it seems to be screwed. Can you get into Safe mode? Can you get into the pre-boot menu at all?
 

2 more replies
Relevance 49.61%

My windows update indicates that some files are missing.  I select reinstall and I get this error.  How do I correct this? -sp

Answer:X60s Windows update will not load Error number: 0x8024D007

Welcome to Lenovo's forums!   First, please check in c:\windows\system32\ and look for a file named WindowsUpdate.log right after you run Windows Update.  Scroll down to the bottom and see what the specific error is.   I have cleared odd Windows Update problems by doing the following:1:  rename c:\windows\system32\softwaredistribution to something else2.  delete c:\windows\system32\WindowsUpdate.log or move it somewhere else. Let us know what happens after you try this and what the specific error is.   

1 more replies
Relevance 49.61%

Been trying to update XP SP2 with the .NET Framework security update V1.1 SP1 (KB886903), but every time I try I receive the following error:

==============
Unable to load JIT compiler (MSCORJIT.DLL). File may be missing or corrupt. Please check your setup or rerun setup!

Error Code: 0xC0000005
Try to install the update again, or request help from one of the following resources.
==============

The only fairly helpful resource I've found tells me that the "Unable to load JIT compiler" error is caused by a timeout error on a system with a heavy load. I've had this error numerous times and checked my system load and it's never been high at all.

Any suggestions would be appreciated.

-z

Answer:Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

reduce the load on the machine by closing applications before re-running setup.

3 more replies
Relevance 49.61%

Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.


Any suggestions?

Sam
 

Answer:fail to load sortbls.nlp error after Windows Update froze

Use System Restore to revert back to a date before any updates may have been applied.
 

2 more replies
Relevance 49.61%

A couple of weeks ago I got error messages from Security Essentials when restarting a PC (Win7/32, SP1). I could not uninstall the program using the Control Panel, so I used the FixIt-utility from Microsoft.
This made things worse.
I am not able to run Windows Update anymore (error code: 80073712 ? Windows could not search for new updates).
There are no system restore dates going back before I started having the problems two weeks ago.
When running sfc /scannow (as admin) I get the following error message:
Windows Resource Protection could not perform the requested operation.
Tried the same function using the Win 7 (SP1) install disk. Get the following error:
There is a system repair pending which requires reboot to complete.
Restarted several times with the same results.
Since SFC was not working I tried to do a repair install. During the compatibility check I got this message:
Windows needs to be restarted so necessary changes to system files can be made before continuing.
I have tried several reboots and also checked for a pending.xml file. Nothing.
Any suggestions/ideas? It is a standard PC I use for Office apps.

Answer:Update error 80073712, SFC not working, cannot update Win7

Hello asiaviking and welcome to the forums

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Click on the Start button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

dism /image:C:\ /cleanup-image /revertpendingactions
Right-click on the Command Prompt window and click Select All, this will invert all of the colours by selecting the text, now press enter. All of this text is now copied.
Paste (Ctrl+V) it into your next post please.
Can you also post the requested data please?

Windows Update Posting Instructions

Tom

6 more replies
Relevance 48.79%

Alright guys, I've got some major problems with a computer here. The computer seems to be infected with some sort of virus, with symptoms similar to conficker. I am not sure that this is what is causing our problems, but it's come down with a nasty worm that has the following symptoms:

1) All microsoft update websites are disabled. I try to log onto them and the website will not load. All other websites load just fine.
2) Major websites posting fixes to viruses and computer problems also redirect to a website with advertisements.
3) I get a svchost error that, upon clicking "ok", freezes the computer or makes it run very slowly.
4) Svchost.exe begins to consume a MASSIVE amount of memory, slowing down the entire computer.
5) I am experiencing random redirects to websites.
6) The computer, as a whole, is running sluggishly.

We attempted the following fixes:
1) Installing and updating avast, and running scans. Various trojans have been removed.
2) Installing and updating malware bytes. Various trojans and viruses have been removed.
3) Running windows repair. This did not fix any of the above problems. We are trying to avoid a complete format here.
4) Reinstalling virus scanners and malware bytes, running them again, and fiding more viruses.
5) Reinstalling internet explorer 8.

None of the above work. We do have access to a windows install CD, just for your knowledge, just in case. But as mentioned before, we'd like to remove the problems without... Read more

Answer:Computer getting svchost error, microsoft update website does not load, MAJOR PROBLEM

Trying to get this working for my boss, guys. We're a small dealership, and its holding up business bad. We've already tried IT guys over the phone.

10 more replies
Relevance 45.51%

Originaly I had the same 3 updates continually installing everytime I logged on. They were sucessful in update history but kept comming back. I ran the system rediness tool, but it didn't help. I ran the microsoft fix it soultions for windows update normal then aggressive. Now I get this error while checking for updates. I tried to run sfc /scannow and then sfc /verifyonly but get the following error: windows resource protection could not perform the required operation. I also tried to install the latest service pack got the following error: error_sxs_componet_store_corrupt(0x80073712).
When I look at programs->installed updates nothing listed, also when I look at programs->turn on/off windows features nothing listed.
Thanks for the response.

Answer:Windows update not working error 80073712

Service pack update problems are difficult to solve. Do you have your win 7 DVD?Your system readiness tool log should be hereC:\Windows\Logs\CBS\CheckSUR.log Post the contents of the log

6 more replies
Relevance 45.51%

After replacing hard drive and cloning old hard drive computer was running slow.  I recovered computer to factory setting, but now I can't  check for updates.  I can't install internet explorer 8, can't install service pack 2.  Several updates were done immediately after the recovery but I can't run Windows Update.
 
Computer is a vista home premium  OS,  X86, service pack 1 build 6001, cpu E2200 2 core, 3.5 GB memory, SMBIOS version 2.5
 
I have tried all fixes listed on the internet when googled, tried the fix it took, tried the tweaking.com fix, but still cannot update.
 
Please help

Answer:Update checking not working error 8024A00

Download SP2, 32-bit , install it from your desktop.
 
Download IE 9, 32-bit, install it from your desktop.
 
After those two events...then go to Windows Update.
 
Louis

1 more replies
Relevance 45.51%

Greetings, I am having issues with Windows Update! First of all when I click the Icon "Windows Update" It actually takes a few moments to get there, which is very unusual! When it does finally come up it shows an "X" on a red shield and says "Check for Updates for your computer - Always install the latest updates to enhance your computer's security and performance" So I click "Check for Updates" and immediately receive an error! "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." Nope, that doesn't work nor did completely shutting it down. So I opened the Administrative Tools and then Services. Scrolled down until I located Windows Update, and clicked on Start the service. I receive the following error: Windows count not start the Windows Update service on Local Computer. Error 0x8007277a: The requested service provider could not be loaded or initialized. So I went to Bing typed in the error code and located a Microsoft webpage about the error and started following instructions and ran First the Norton removal tool, then removed AVG then downloaded and ran Windows Update Diagnostic. It did not fix all the issues. Weird that it told me to run in default & aggressive modes, but there was no different modes.

Website: Error Page - Microsoft Community

The attachment Troubleshooting WU error.png is what I get when I ran the diagnostic. The Troubles... Read more

More replies
Relevance 45.51%

Hi I CANNOT get windows update to work anymore, gives me error: 0x8024D007. I registered fatal dll's from the windows update log- still did not work so- This is from the WindowsUpdate.log:

2009-11-24 10:41:09:729 3856 c4 Service FATAL: ChangeServiceConfig failed with error 0x80070005
2009-11-24 10:41:09:729 3856 c4 Service FATAL: WU client fail to create WU service with error 0x80070005
2009-11-24 10:41:09:739 1796 78c Misc FATAL: Self registration of C:\WINDOWS\system32\wuaueng.dll failed, error = 0x8024D007
2009-11-24 10:41:09:739 1796 78c Setup WARNING: Completed registration operations for section wuaueng_WebSetup: status 0x8024d007
2009-11-24 10:41:09:739 1796 78c Setup WARNING: Setup failed while processing registry operations, error = 0x8024D007. Rolling back changes.

2009-11-24 10:41:13:284 1796 78c Setup FATAL: InstallUpdatedBinaries failed with error 0x8024d007
2009-11-24 10:41:13:284 1796 78c WUWeb FATAL: InstallUpdatedBinaries failed with error:0x8024d007
2009-11-24 10:41:13:284 1796 78c WUWeb FATAL: UpdateClientWorker failed: error 0x8024d007

2009-11-24 10:46:38:602 2224 5ec Setup FATAL: InstallUpdatedBinaries failed with error 0x8024d007
2009-11-24 10:46:38:602 2224 5ec WUWeb FATAL: InstallUpdatedBinaries failed with error:0x8024d007
2009-11-24 10:46:38:602 2224 5ec WUWeb FATAL: UpdateClientWorker failed: error 0x8024d007

Please help? Thanks

Answer:Windows Update not working : Error 0x8024D007

Hello scubes.Have a look here to see if it helps.
http://uk.search.yahoo.com/search?ei...8024D007&type=

3 more replies
Relevance 45.51%

My client's Win 7 64 bit desktop PC will not run"Windows Update".... Can't say when this quit working.. possibly in the last 1-2 months... I now get the red "x" and error message "Windows update cannot currently check for updates, because the service is not running"... when I try to start it in "services", I get "system Error 5"....

Also, the downloading using E 11 doesn't work,,, get the message "xxxxx contained a virus and was deleted".... I have scanned the PC with combofix, Malwarebytes, Rougue Killer, and others, and nothing is found. Downloads work fine with Google Chrome..

Finally, I also see "windows defender" is now missing from this system.

Not sure if any of these are related, but need to get Windows Update working again

Any suggestions on how to get Windows Update working again? This PC is out of use by my client until I get this resolved.

Thanks for any help you might be able to offer~

More replies
Relevance 45.51%

Hello

My vista home premium 64, service pack 1, cannot be updated. I tried to do all the advices that I was able to find in the differents forums and in the Microsoft Knowledge Database.

I uninstalled my antivirus and firewall security software, rebooted my systems, no success...I deleted the content of C:\Windows\SoftwareDistribution\Download, rebooted my systems, nothing...I donwloaded, installed and run the System Update Readiness Tool for Windows Vista 64-bit. It ended ok, but still I couldn't update my systemI donwloaded Vista Service Pack 2, and I tried to install it directly from it, no sucess...I found this solution in the forums:
net stop cryptsvc
ren %systemroot%\system32\catroot2 oldcatroot2
net start cryptsvc It didn't work
I tried to do also this, opening a command line window as administrator:
regsvr32 wintrust.dll /salso this
sfc /scannow no errors, doesn't work

Please, can you help me?

Best regards

Answer:Vista Update not working. Error 800B0100

Hi jlauriale, welcome to the forums.

I've seen 1 solution somwhere that might help, it did with me once. Windows Update connects using IEs settings, you could try to 'reset' Internet Explorer in the advanced settings tab. This will completely reset IE, including any addons you may have installed.

   Note
You will need to reinstall any addons you had, but try 1 at a time just in case it was 1 of them causing the issue
Hope this helps




Jeff

2 more replies
Relevance 45.1%

I've tried so many ways to repair this issue using Microsoft fix it, renaming distribution folder in services.msc and through CMD prompt. I've followed all solutions through many websites using google but none have helped. I've also tried to re-register .dll files.
Does anyone else have any other solutions?

Answer:Windows vista update not working error 0x80070005

I had the same problem fixing this error for a relation of mine just the other week I found the solution on this page Click Here

2 more replies
Relevance 45.1%

Greetings,

I am using Windows XP SP3. On shutdown of my laptop I received a message about Microsoft Updates to install and computer would shutdown when finished installing. An hour later the updates still had not finished installing so I shut down my laptop manually.

When I turned on my laptop I received a message stating could not find C:windows/system 32/ juschd.exe.bat file, however, computer continued to boot up and all appeared well.

I then tried to update McAfee and the Security Center was not able to update so I type in the address bar of Internet Explore www.mcafee.com and Internet Explore was not able to display the page. I also found I could not get to any site with "McAfee" in the address.

I called McAfee and after a hour they said I need to call a different department and that there would be an additional charge.

So I decided to try and fix this on my own. Researched and found that this might be a MTU size error so made registry entry of hkey_local_machine\system\CurrentControlSet\Services\Ndiswan
Parameters\Protocols\0... ProtocolType REG_DWORD 0x00000800 PPPProtocolType REG_DWORD 0x00000021 ProtocolMTU REG_DWORD 1452.

This did not work. Then read to uninstall McAfee. So I uninstalled McAfee including showing all folders and files and then deleting them. Needless to say this did not work. I still could not visit the McAfee websites.

Then I found this forum and did some more reading. Wish I had found this forum first.

Since reading some of the p... Read more

Answer:Microsoft Update Error/McAfee Stopped Working...

16 more replies
Relevance 45.1%

I have done all the things Microsoft suggests, several times. What is going on here?I have Windows XP SP3. Thank you.[Error number: 0x8DDD0018] The site cannot continue because one or more of these Windows services is not running: Automatic Updates (allows the site to find, download and install high-priority updates for your computer)Background Intelligent Transfer Service (BITS) (helps updates download more quickly and without problems if the download process is interrupted)Event Log (keeps a record of updating activities to help with troubleshooting, if needed)To make sure these services are running:1. Click Start, and then click Run.2. Type services.msc and then click OK.3. In the list of services, double-click on Automatic Updates and then click Properties.4. In the Startup type list, select Automatic and click Apply.5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.7. In the Startup type list, select Manual and click Apply.8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.9. In the list of services, double-click on Event Log and then click Properties.10. In the Startup type list, select Automatic and click Apply.11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.

Answer:[Error number: 0x8DDD0018] Microsoft Update not working

Nevermind. I just resolved it myself. Thank you.

1 more replies
Relevance 45.1%

Hi, I'm running Windows 7 64-bit (I think) and I cannot run Windows Updater or switch on Windows Firewall. On a possibly related note, Windows .NET framework refuses to install or work properly on my PC.
 
Windows Updater: When I attempt to check for updates the updater simply says that the "service is not running" I have been unable to turn the service on by any method I have tried. Whenever I run the inbuilt troubleshooter and recommended Microsoft Fixit files, they merely say they have either fixed the problem or not detected the problem. Sadly, this isn't the case as the problem has not been resolved at all. When I ran the troubleshooter recently, it provided a report which I have attached as a .pdf in the hope it may help lead to a solution.
 
Windows Firewall: The Firewall says is is 'Not running reccommended settings' and will not restore those recommended settings if I ever click the button to 'fix' the issue. If I open 'Windows Firewall with Advanced Security' the program merely states "there was an error opening the Windows Firewall with Advanced Security snap-in. The Windows Firewall with advanced security snap-in failed to load. Restart the Windows Firewall service on the computer you are managing. Error Code: 0x6D9
 
I have seen that these issues have been solved on this forum before without system resets and hope such a solution is possible for my computer.
Thanks for your time,
Joel.
 
 

Answer:Help?: Cannot Update Windows & Firewall Not Working (Error 0x6D9)

First of all, welcome to BC !
 
The firewall and updater problems are very common symptoms of malware infection. Your best bet is to post this problem in the 'Am I infected?' section of BC and get any question of malware resolved before going looking for other possible solutions.
 
When you post there, include the make and model of your computer, as well as your operating system. If it is self-built, then list the main specs. And be patient !  These people are busy !  And if you are asked to do something which you don't understand, post back to them for clarification.
 
Chris Cosgrove

3 more replies
Relevance 45.1%

Hello, I am trying to get help with my laptop. It will can no longer check for Windows Updates. It states, "Windows couldn't search for new updates."

Windows Vista Home - 32 bit system

Below is my HighJackThis post. Please help!

During the HighJackThis test it stated that my system denied access to the host file and then it could not create a highjack this notepad file.
 

Answer:Windows Update Not Working Error Code: 80070490

8 more replies
Relevance 45.1%

Hi, guys! So, I recently did a fresh installation of Windows 7 Home Basic since I had some issues with my HDD, and now I've been having a lot of troubles to update, giving me the code 800b0100.
SFC Scan didn't show any problems, so no error codes. Here are the CBS files, though: https://www.dropbox.com/s/0c1epjong36sasn/CBS.zip?dl=0

If there's anything I'm missing, please tell me!
Oh, and thanks in advance for your help.

More replies
Relevance 45.1%

Hi!
I know there are tons of messages about how to install or force install W10 but I have a different error and none of the solutions seem to work.
I'm getting error 80244019 in WindowsUupdate every time I try to look for updates. I've tried since yesterday the force command line but it does nothing. I've tried also fixing Windows Update with WUdiagnostic. It "solves" 3 or 4 errors everytime I run it but it doesn't change the 80244019 error.
How do I solve 80244019 error?
I have also tried the MediaCreationTool way but when it's going to start the installation it says that I'm trying to install a different language, not the one that uses my OS so it won't let me upgrade The only way is wiping my files and apps and I don't want that. How do I change the language of the MediaCreationTool?
Thank you
PS. It's crazy how easy was for my other PC to install it and how impossible it is with this one.

Answer:Windows Update Error 80244019 and MediaCreationTool nor working

I have the exact same problem with the mediacreationtoolx64. I live in Denmark and i use english as language on my windows 7 pro. But instead of just checking the language used MS has decided to do some ber secret magic trick that i cannot seem to escape so that it wants to install a danish version of windows 10. This is SO annoying. How can they just assume that you want a danish version just because you live in denmark? There can be a million reasons for using another language and the user should be able to upgrade to the language that they already uses.

4 more replies
Relevance 45.1%

Windows Update doesn't work on my Windows 7 Pro x64. Error code is: 80073712
sfc /scannow gives me no errors.
You can download my CBS.zip from Dropbox: https://www.dropbox.com/s/yxfqxf0caf5yj2k/CBS.zip?dl=0

Can someone please help?

More replies
Relevance 44.69%

Hi, I originally posted this in the standard 'Windows 7 Help' section and was advised to post it here, so sorry for duplicate topics.
I have previously run virus detection software and it does not appear to have fixed any of these problems, but I will, of course, happily try again if it is deemed the best option with recommended software.
 
I was advised to include the following information...PC Model: Acer Aspire M3910Operating System: Windows 7 Home Premium 64-bit
I have also attached a transcript of the DxDiag Diagnostic readout in the hope that it will help.
 Problems: I cannot run Windows Updater or switch on Windows Firewall. On a possibly related note, Windows .NET framework refuses to install or work properly on my PC. I understand these are common issues with Malware infection.
 Windows Updater: When I attempt to check for updates the updater simply says that the "service is not running" I have been unable to turn the service on by any method I have tried. Whenever I run the inbuilt troubleshooter and recommended Microsoft Fixit files, they merely say they have either fixed the problem or not detected the problem. Sadly, this isn't the case as the problem has not been resolved at all. When I ran the troubleshooter recently, it provided a report which I have attached as a .pdf in the hope it may help lead to a solution.
 Windows Firewall: The Firewall says is is 'Not running reccommended settings' and will not restore those recommended settings if ... Read more

Answer:Am I Infected?: Cannot Update Windows & Firewall Not Working (Error 0x6D9)

Sorry, here's the DxDiag readout - I forgot to attach it like an idiot.
 
------------------
System Information
------------------
Time of this report: 12/7/2013, 23:08:17
       Machine name: SQUEAKIE-ACER
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: Acer
       System Model: Aspire M3910
               BIOS: Default System BIOS
          Processor: Intel® Core™ i3 CPU         550  @ 3.20GHz (4 CPUs), ~3.2GHz
             Memory: 3072MB RAM
Available OS Memory: 3000MB RAM
          Page File: 2765MB used, 3231MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
 System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 32bit Unicode
------------
DxDiag Notes
------------
     ... Read more

10 more replies
Relevance 44.69%

Hi guys, since a few days im not able to search for any windows updates. i get the error message 08007002. i tried to follow all 4 (5) steps before posting here to help you to understand and analyze my problem. i downloaded and run SURT. But i can not complete second step as i get the following message with SFC Scan:

Windows Resource Protection Could Not Start the Repair Service im running windows 7 (german version) so i try my best to get the messages translated correctly. when trying to start Windows Modules Installer i get the following message: System Error 2. i tried to start it with cmd.exe and manually (services.msc), but since i get the mentioned error i cant run sfc /scannow.

I hope you can help me somehow to solve this mess...

Answer:Windows Update Error Message 080070002 - sfc /scannow not working

CBS.zip this is what i can offer you now. im not sure if the file contains necessary information.

4 more replies
Relevance 44.69%

So I realized I had an issue when I was prompted by some software to install a hotfix for windows that fixes an issue with exceptions.

I downloaded the hotfix but a prompt popped up almost immediately giving me a 0xc8000222 error.

A simple search lead me to a simple solution: run Windows Update.

When I go to run Windows Update, however, it tells me that the service is not running. I've verified it is, including stopping it and starting it again with a reboot.

There apparently was an update given by Microsoft to fix the Windows Update issue but, of course, it's released as an msu so it fails with the 0xc8000222 error.

I haven't had a chance to run chkdsk yet (I can't spare the time as this is my work machine and have things to do today) though there are no other issues with my system so I find it unlikely. I did run the SFC tool though, the output log can be access here.

Any ideas on how to progress would be great. Thanks.

Answer:.msu updates throw error 0xc8000222. Windows Update not working.

We really need the CheckSUR report.


Please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Relevance 44.69%

Hi forum,

I'm having some problem about a week ago with Microsoft security essentials bugging out on me and not opening or updating. Basically the message I got on opening MSE was windows cannot access specified path or file. You may not have the appropriate permission to access the file. Upon reading this about a week ago, I think! I proceeded to foolishly downloading a Zeroroot access program and a few MSE alternatives. Since then I have still been unable to re-install MSE by deleting all components in the registry.

The error code I get with trying to re-install MSE is 0x80070643

Having then unistalled the zeroaccess program and the previous alternative antivirus programs, I still cannot get MSE working, and I now have a windows 7 update error. The new system update I believe may be to do with security as-well!! The error code on doing a windows 7 update is 80070005, and it did cut out at 9% every time. (although now I think it is just 0%)
Can someone please help me as I have had a very successful streak of avoiding viruses by always usin MSE. I don't want, and can't afford to get a virus attack, not to mention Im runnign windows 7 ultimate so I need the windows 7 updates too because the ultimate can be dodgy sometimes. Nb the update I cannot do is 1.4mb but I am anticipating windows will throw me a new update any day soon which could be anywhere from 30mb to 200mb and it could fail all of it leaving me prone to attacks.

I can post my specs, ... Read more

Answer:microsoft security essentials not working and windows update error

Hi graphic333 welcome to SevenForums

Download the two programs below

Run Farbar Recovery Scan Tool


64-Bit Version OS Farbar Recovery Scan Tool x64 <===== Download Link

Drag the FRST64.exe from the Downloads folder to your Desktop

Right click on FRST64.exe and choose

When the tool opens click Yes on the disclaimer window .

Press Scan button.

FRST will let you know when the scan is complete and has written the FRST.txt to file



   Note
The first time Farbar Recovery Scan Tool is run, it makes also another log Addition.txt


Please upload both logs in your reply.(FRST.txt and Addition.txt)

FRST.txt and Addition.txt will be on the Desktop



Farbar Service Scanner

Click here Farbar Service Scanner to DOWNLOAD

Place file into your desktop

Place a check mark next to the following options
⬜ Internet Services
⬜ Windows Firewall
⬜ System Restore
⬜ Security Center
⬜ Windows Update
⬜ Windows Defender
Press the Scan button

Farbar Service Scanner will create a log, called FSS.txt, on the Desktop. Upload the FSS.txt with your reply

Upload a File
Click on the Go Advanced button under the Message box . Scroll down to Additional Options then click on Manage Attachments in the Attach Files sections . Click the Browse button locate the file then click on the Open button . In the Upload File from your Computer section click on the Upload button . Wait until it ... Read more

9 more replies
Relevance 44.28%

Our users have IE 7 and 8. We keep them locked into place by pointing IE to our firewall product (tools > internet options > connections > lan settings), so that only approved sites are the ones that our people can access.In the last few days, several of them report issues with specific websites loading very slowly - load times of over an hour just to get the log-in screen to appear.Troubleshooting Steps:1.) Unchecked the "use proxy server for your LAN" under the IE menus---> Site resolves instantly, as it should---> This pointed me to the direction that perhaps the site wasn't configured for our firewall2.) Re-checked the "use proxy server" box, and specifically configured the site in our firewall---> Site continues to resolve slowly, with the same load times as before performing step 1That would normally indicate that the problem is on the vendor's end. Something may be wrong with their site. And that's the line of thought I was pursuing until I was reported back to that the users are having the same problem on other websites. These new websites they're having problems with are, and have been for a long time, configured properly in the firewall.I'm not sure what my next step is to pursue. What am I looking for now? I don't know enough about networking to figure out where to track next.

Answer:Users are unable to load websites - no error, just 1-hour+ load times for pages

Bump.

3 more replies
Relevance 44.28%

WTF?

When I start the game "DiRT", press enter, the message like that, saying, that load profile is aborted, appears. Why? What I did wrong? Is this a bug in the game? I dont want to create a new profile. I wanna go on, but I can't because of this stupid issue.

Im running windows XP SP2. 2.33 GHz / 1,98 GB of RAM / NVIDIA GeForce 8800 GTS

I have a patch 1.2 installed to my DiRT.

Hope somebody will answer.

Cheers,
S.
 

More replies
Relevance 44.28%

I have a NB100 And when it trys to boot i get Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys

I have connected a DVD drive with the product recovery disc GMR400882EN0 inside it and powered on, on booting i keep F12 pressed and I get the options for setting it to boot from HD FDD CD/DVD USB Memory, I set it to boot from CD/DVD

When it loads it gets to loading RAM image I get Error 32768 File PEBASE ISO Could Not Load.

I am suspecting faulty recovery disc? and a new one is 29.99? But the laptop is under warranty but they told me to do this.

My daughter has a Asus 904HD and once she had a problem... She had none of the poor support of go and do it yourself... Asus sent a courier very fast-confirmed pick by text-fixed-delivered back confirmed drop off by text within 5 days!!

Answer:NB100 Recovery Disc wont load - Error 32768 File PEBASE could not load

>I am suspecting faulty recovery disc? and a new one is 29.99? But the laptop is under warranty but they told me to do this.

I doubt it?s a faulty recovery disk.
The error message: missing or corrupt: System32\Drivers\Ntfs.sys could be caused by faulty HDD or another hardware component.
In your case I recommend contacting the Toshiba ASP for hardware check and new OS installation. The notebook is under warranty (as you suggested in the posting above) and therefore everything should be done for free because it?s covered by warranty

Bye

1 more replies
Relevance 44.28%

I honestly think I need some advanced help here because Ive tried about every solution I could find that pertained to me using Google.

So all of a sudden my windows update just stopped working/checking for updates(I get unknown error 8024402C ) and I cannot connect to some Microsoft websites like "www.update.Microsoft.com" and the download place for ie 10, Firefox says it cant find the server at "update.microsoft.com" and "download.microsoft.com" and when I diagnosed the connection with internet explorer it said "The DNS isn't responding" on both Microsoft websites all other websites work fine.

Things Ive tried that did not work:

IMPORTANT: I have recovered my laptop back to an image I made 3 years ago before I knew this would be this hard to fix.
The Microsoft fix it tool gives me error 80072EE7
updated some drivers
Went to "services.msc" and checked that background intelligent, windows update, and workstion were started and automatic.
I did a full scan with malware bytes program and found nothing.
I changed around the (TCP/IPv4) on my internet connection to the opendns and googledns adresses. could not change on the (TCP/IPv6) said invalid address.
Ran ccleaner program to fix any registry problems there might be.
tried about all the Microsoft support links I could find that looked like they might help
talked to Microsoft support
cursed at laptop
My PC is a Toshiba laptop running genuine windows 7 home premium 64 bi... Read more

Answer:Windows update completely stopped working, unknown error 8024402C

I dont think this will do anything, but maybe try running this utility: http://support.microsoft.com/mats/windows_update/
 

6 more replies
Relevance 43.46%

I am having wifi with proxy enabled in my college.when I try to connect to wifi it says no internet access though internet is working after I have updated to update 1.Can any one help me solve this issue.I think there is some conflict with the internet sharing opion and enabling wifi.As soon as I turn on internet sharing wifi is turned of and vice versa.please help me solve this. Thanks

More replies
Relevance 43.46%

failed to load library 'd3d9.dll

Answer:can not load skype with this error failed to load library 'd

failed to load library 'd3d9.dll

3 more replies
Relevance 43.46%

Started receiving this message a few months ago???? I read another similar thread that said to search hidden folders and files so here's my results:(mag_hook.dll ----- C:\WINDOWS\system32)(narrhook.dll ----- C:\WINDOWS\system32)(NeroSearchTrayHook.dll----C:\Program Files\Common Files\Ahead\Lib)(QOEHook.dll ---- C:\Program Files\eTrust Internet Security Suite\etrust Anti-Spam\QSP-5.1.18.0)(CAHook.dll ---- C:\Program Files\CA\SharedComponents\PPRT\bin)(mslhook.dll ---- C:\Program Files\Common Files\InstallShield\Ebgube\6\Intel 32) Any suggestions as to how to stop the error message? Thanks, Jill

More replies
Relevance 43.46%

I've tried scanning my friends computer with CCleaner and Spybot as well as anti-virus and nothing was solved.The computer prompts "Application Failed to Load" errors upon log in. Then a program called PhotoGallery tries to install automatically but fails repeatedly. There is no internet connection either. The wireless signal shows it is connected but it can not load any websites. Here is the HiJackThis log please be aware that I probably will not be able to get to the computer until at least Friday at the latest. So please list every step to follow in order so I can take proper and prompts action so I don't hold up anyones time.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:43:16 PM, on 8/4/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16674)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOW... Read more

Answer:Application Fails To Load Error/websites Don't Load

::Edit::Replied to the following topic about issue.http://www.bleepingcomputer.com/forums/topic14717-30.html

2 more replies
Relevance 43.05%

hii got this unusual problem from last couple of days whenever i open browsereither firefox or ie soon after it open a random tabs by itself.my windows update are not working always shows Error number: 0x80072EFF.i scan with avg,malwarebite,superantspyware but nothing comes up ,but my malwarebite keeps showing a ballon in system tray saying successfully blocked access toa potentially malicious website 91.212.226.67 and it keeps changing the number of the site.i download windows malicious tool and it says alerion c virus but when i scan with avg nothing comes up.iam bit confuse coz of this. iam posting trend micro hijack this log file for you guys to look into and thanks for your kind help in advanceLogfile of Trend Micro HijackThis v2.0.4Scan saved at 10:00:10, on 22/06/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\AVG\AVG9\avgchsvx.exeC:\Program Files\AVG\AVG9\avgrsx.exeC:\WINDOWS\Explorer.EXEC:\Program Files\AVG\AVG9\avgcsrvx.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\AVG\AVG9\Identity Protection&#... Read more

Answer:windows update not working Error number: 0x80072EFF.mozilla and ie opens random tabs.

hi just adding the information to the exisitng topic last nite i ran tdsskiller and it found and infection in driver which is disinfected after reboot .my windows updates are working fine now and iam not getting the pop up ballon saying access denied to malicious wesite but when i scan with superantspyware it shows that hkcmd is infected it cures it but it come back again even malwarebite showsthe thing like shell open command bad note pad.fix it but it appears again.iam trying to post the latest log for you guys to have a look cheers.22:53:13:812 4044 TDSS rootkit removing tool 2.3.2.0 May 31 2010 10:39:4822:53:13:812 4044 ================================================================================22:53:13:812 4044 SystemInfo:22:53:13:812 4044 OS Version: 5.1.2600 ServicePack: 3.022:53:13:812 4044 Product type: Workstation22:53:13:812 4044 ComputerName: ASDF-E26E85805B22:53:13:812 4044 UserName: Administrator22:53:13:812 4044 Windows directory: C:\WINDOWS22:53:13:812 4044 Processor architecture: Intel x8622:53:13:812 4044 Number of processors: 122:53:13:812 4044 Page size: 0x100022:53:13:822 4044 Boot type: Normal boot22:53:13:822 4044 ================================================================================22:53:14:263 4044 Initialize success22:53:14:263 4044 22:53:14:263 4044 Scanning Services ...22:53:14:773 4044 Raw services enum returned 387 services22:53:14:803 4044 22:53:14:803 4044 Scanning Drivers ...22:53:15:865 4044 ACPI (8fd99680a539... Read more

3 more replies
Relevance 42.64%
Relevance 42.64%

Update - 9/8/15

Fixed by reinstalling Windows fresh (Again).

I think the problem was caused by installing Windows linked with my Microsoft account and then switching that to a local user. My Microsoft account was registered for the insider program so perhaps I was receiving the fast updates and switching to a local account put me on slow updates which got Windows Update muddled in the confusion.

Original Post

Windows Update appears to be stuck/broken. It displays this loading animation even when left alone for an entire day (See screenshot). All the other panels such as Windows Defender will display their available options, it is only Windows Update that will not show.

This is a clean install of Windows 10 Home.

I have made some alterations to the service configuration, disabling what I had been advised as unnecessary services. I have reverted as many of those changes as I could remember but it is a possibility that one of those changes caused this.

Background Intelligent Transfer service is "Running" and set to "Automatic (Delayed Start)".
Windows Update service is "Running" and set to "Manual (Trigger Start)".

8 Aug 15 - Edit: I have cross referenced services with another computer with an unaltered fresh install of Windows 10 Home. No difference in service configuration was found.

Internet connectivity is stable. Network profile is "Public". No alterations have been made to the default network configuration.

User... Read more

Answer:Settings > Update & Security > Windows Update - does not load

Hi wadlip,

I have done exactly the same fixes as you - to no avail. Nothing works. I am surprised by a lack of response by Microsoft. In addition to not being able to update, i cannot update the definitions for Windows Defender. This issue has definitely something to do with BITS.
If i stumble over the solution, i'll post here. I have all night to find the fix

9 more replies
Relevance 42.64%

Update - 9/8/15

Fixed by reinstalling Windows fresh (Again).

I think the problem was caused by installing Windows linked with my Microsoft account and then switching that to a local user. My Microsoft account was registered for the insider program so perhaps I was receiving the fast updates and switching to a local account put me on slow updates which got Windows Update muddled in the confusion.

Original Post

Windows Update appears to be stuck/broken. It displays this loading animation even when left alone for an entire day (See screenshot). All the other panels such as Windows Defender will display their available options, it is only Windows Update that will not show.

This is a clean install of Windows 10 Home.

I have made some alterations to the service configuration, disabling what I had been advised as unnecessary services. I have reverted as many of those changes as I could remember but it is a possibility that one of those changes caused this.

Background Intelligent Transfer service is "Running" and set to "Automatic (Delayed Start)".
Windows Update service is "Running" and set to "Manual (Trigger Start)".

8 Aug 15 - Edit: I have cross referenced services with another computer with an unaltered fresh install of Windows 10 Home. No difference in service configuration was found.

Internet connectivity is stable. Network profile is "Public". No alterations have been made to the default network configuration.

User... Read more

Answer:Settings > Update & Security > Windows Update - does not load

Hi wadlip,

I have done exactly the same fixes as you - to no avail. Nothing works. I am surprised by a lack of response by Microsoft. In addition to not being able to update, i cannot update the definitions for Windows Defender. This issue has definitely something to do with BITS.
If i stumble over the solution, i'll post here. I have all night to find the fix

7 more replies
Relevance 41.41%

Greetings!
I have an Optiplex 9010 AIO. This morning I was trying to update the BIOS of my system, from A10 to A13. During the update process it showed an error: "ME FW Update Failed: Internal error: FWU_Buffer " - please see the photo below. Although the update failed on the Management Engine part, it still boots up and running OK. I tried couple of times to update the BIOS, and each time I got the same error. I tried to flash the A12 and A11 BIOS as well, A12 gives same error, and A11 has the same Management Engine version hence no use.
Any help on this is very much appreciated!

Answer:Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Hi Stone3t,
Can you provide a screen shot showing the current BIOS version?

16 more replies
Relevance 41.41%

My computer randomly started displaying this error upon start up a week ago and I have no clue what is causing it. I googled it and seen that it could be caused by a linksys wireless router, one was installed on the system before, but has been uninstalled for quite some time now. Can anyone help me correct this or at least help me figure out what is causing it?
 

Answer:Load dll error - Can't load res_dll

Have you checked in your Startup items to see if it's listed there? It can probably be easily disabled.
Have you ever used msconfig?
 

1 more replies
Relevance 40.59%

hi,

My OS is Windows 7 Professional 32-bit, Unable to update any file from windows update. Same error code 8024402F occurs and Windows could not search for new updates.

Whereas my internet connection is working fine and i able to browse and download from internet.

Also tried Microsoft Fix it and it says Repair windows update components. After applying it still same error occurs.

Even disabled AVG Internet Security 2012 and still same problem.

Here is the log detail from windowsupdate.log

2012-07-21 18:19:18:545 1256 8b0 AU ## START ## AU: Search for updates
2012-07-21 18:19:18:545 1256 8b0 AU #########
2012-07-21 18:19:18:548 1256 8b0 AU <<## SUBMITTED ## AU: Search for updates [CallId = {7CB9454F-3210-479E-A30A-D356B61C2A99}]
2012-07-21 18:19:18:548 1256 17e8 Agent *************
2012-07-21 18:19:18:548 1256 17e8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-07-21 18:19:18:548 1256 17e8 Agent *********
2012-07-21 18:19:18:548 1256 17e8 Agent * Online = Yes; Ignore download priority = No
2012-07-21 18:19:18:548 1256 17e8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and Reb... Read more

Answer:Windows update is not working in Windows 7 Professional. Error code 8024402F

Press Windows+R key and typencpa.cpl and click okRight click on your LAN connection-propertiesClick on Internet Protocol Version 4 (TCP/IPv4) and then click Propertiesclick on Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.PREFERRED 4.2.2.1ALTERNATE 4.2.2.2Restart the PC Let me know if you can update now

6 more replies
Relevance 40.59%

Dear Forum,

the windows update service on my laptop only returns error 80070002. It seems to be a common problem for a lot of people, however most of the standard steps to take do not seem to work for my machine.

CHKDSK is ok.

sfc /scannow however refuses to work. Even with admin privileges, it says that "resource protection" wont allow it to run. If started from windows recovery mode, sfc claims that there is another operation pending and a reboot is needed, first. Needless to say, this other operation is stuck in limbo.

All other methods of manually deleting/reseting the update logs, including the .bat from this website, have failed.

Even returning to a system restore point brought no change.

The last known update to work was for net framework.

I'm not sure where to go from here since i figure my attempts might have already made the situation worse.

Had to use a third party filesharing provider:

Logs.zip

Answer:Windows 7 update error 80070002, "usual" rescue options not working.

Please post the requested files anyhow.

9 more replies
Relevance 40.18%

Hello, my Windows Update is not working: it returns the error 80073712. It has been like this for several months. I tried to do sfc /scannow but it says: "beginning system scan. This process will take some time" and 2 seconds after it says "Windows Resource Protection could not preform the requested operation". My Windows Help and Support doesn't work either as well as my Windows Features (when I open "Turn Windows features on and off" it returns a blank box). I also tried the "Windows6.1-KB947821-v27-x86.msu" but it does not repair the error. I also scanned my system with Malwarebytes Antimalware and avast! to see if it was a malware or virus but i do not find anything.

In the other hand, my date and time is working as well as my search box.

I do not know what I have to do.
I have a Windows 7 Ultimate x86.
Thank you for your help

PS: I also tried some other things but I do not remember anymore what they were

Answer:Windows Update error 80073712 (sfc, windows feature, help not working)

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

9 more replies
Relevance 40.18%

I have 2 hard drives on my pc. I load my 2nd hard drive with my XP Pro and then I do the updates. SP2 loads, updates, and then reboots the PC. As it boots up and is starting to bring up the desktop it reboots, then it just repeatedly does a reboot. I shut it down for a while and started the PC back up. Still the same. Any ideas why this would happen?

Answer:XP Pro O/S Load & SP2 Load/Update

System manufacturer and model?Did you read/follow any guidance for installing SP2...which originated with the system manufacturer?Example: HP Instructions, Updating to SP2 - http://h10025.www1.hp.com/ewfrf/wc/documen...228&lang=de Louis

1 more replies
Relevance 39.36%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Relevance 39.36%

hi guys
when i strarts my computer its facs starts runs so fast and makes noices what could be the issue
but if i press f1 to continue it goes kingd of a normal sound but it then make loud again
please help ?
Alert! Previous fan failure. Strike F1 to continue or F2 to run setup utility.
tell me it the fan fan faulty or should i apply the heat compond to the heatsink ..!

regards
 

Answer:gx280 fan makes load sound and appears error fan faliure error

if it says "fan failure" then that is what needs replacing. Thermal paste will not fix a faulty fan!
 

1 more replies
Relevance 39.36%

I get this error everytime I try to open this site.

https://qweststore.cellmania.com/qwest/starz_detail.do?itemtype=starz

"Message: Object required
Line: 1562
Char: 4
Code: 0
URI: https://qweststore.cellmania.com/qwest/scripts/cm.js"

also get this:

Message: Unexpected call to method or property access.
Line: 264
Char: 5
Code: 0
URI: res://ieframe.dll/httpErrorPagesScripts.js

using I.E. 8 / Windows XP
all firewalls are down
no anti-virus software is running (including addons)
browser security is very minimal
addons are updated (or removed) latest version of java is installed
have latest version of flash and it is added onto I.E. browser
i meet all of the minimum requirements
What happens: I enter my email address into a form and click a button that should order this Starz thing I'm trying to get. When I click, it works and works and works until I finally get "page cannot load" error.

I have tried everything I've been able to troubleshoot with (via googling) and to no avail.

Also: I just got Qwest High Speed and MSN and Live (sort of a bundle) and my pc was updated -- I.E. to version 8 and whatever else Windows updated.

If you need more information, please let me know. (I also think I might be missing some libraries.

Thank you! :-D
 

Answer:Solved: Page load error every single time w/ error ...

7 more replies
Relevance 38.95%

I have Windows XP SP3. I have been infected with WINPC Defender. I went on line and checked out some sites they recomended Spy Blaster I installed this and the computer re-booted and now it gives and error message Booting GRLDR turning on gate A20 ..... Success and a black screen. XP Will not load

Answer:XP won't load error message Booting GRLDR error

Close this thread and mark it as resolved - then stick to your duplicate one.

1 more replies
Relevance 38.54%

MDT 6.3.8330.1000 , ADK 10, CM07 (work in progress to upgrade)

Hi All,

      i just caputure windows 7 x64 ent from MDT and trying to deploy with CM07, getting error  in setuperr.log"Error [DJOIN.EXE] Unattended Join: Failed to load all required input parameters, error occured processing [Username]: 0x57"
and " [DJOIN.EXE] Unattended Join: Unable to join; gdwError = 0x57". I am not using "Apply Network Settings" to join computer not unattend.xml file. After install driver, image stop at set up windows (looking for computername). I have
setup my osdcomputername in collection. 

   My production image works fine with osdcomputername. i just update this image with IE11 and rebuild the Unattend.xml file.

link is for my log files http://1drv.ms/1mC6mFv ...

thanks for help in advance.

orion

More replies
Relevance 38.54%
Question: Cannot load update

Have been advised by HP Support Assistant to download and install HP Consumer Desktop PC BIOS Update ROM Family SSID 8187.  When attempting to download and install, a restore point is set, and then the process is turned over to a third-party program/vendor for completion.  I let the computer run for 48+ hours straight without interrupting the process by using any other programs on the computer.  Update never downloaded nor installed.  Help.

More replies
Relevance 38.54%

I received this update last week but it will not load. I don't know if I need this or not.

Your advice appreciated.

Thanks

Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems (KB2160841)
Download size: 3.6 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

Answer:New Update Won't Load

Go to this web page.
MS10-077&#58; Vulnerability in the .NET Framework could allow remote code execution

Then find the following and click the link to download and install directly. This often works.






Quote:
Skip the details: Download the updates for your home computer or laptop from the Microsoft Update website now:
http://update.microsoft.com/microsoftupdate/ (http://update.microsoft.com/microsoftupdate/)



Mike

8 more replies
Relevance 38.54%

Hi,

I'm running Windows XP - 32bit.

I have just fresh installed windows xp and downloaded the latest software/drivers.

I went to the official website.. (Radeon HD 2600XT)
http://sites.amd.com/us/game/downloads/Pages/radeon_xp-32.aspx

I Installed the latest graphic software/driver and came into trouble.. the installation showed 1 error, I clicked to view the error report and the report was blank. So I didn't even get an error code to work with.

Catalyst Control Center won't start up (version 10.12) I have done automatic window updates, but still no luck.

I'm utterly stumped for ideas! even after Google seaching..

can anyone offer some help? that would be great Thanks.
 

Answer:ATI / CCC 10.12 update, won't load

Have you checked to see which version of .NET your CCC needs and whether it's one of the versions installed on your XP?
 

5 more replies
Relevance 38.13%

m900 Win 10 bluetooth was working perfectly , did an auto update and the update included Bluetooth LOCKafter al updates installed, i restarted the m900 tiny and noticed a new ICON on the desktop labeled Bluetooth lock.I tried to use my bluetooth speakers that were working just before the update, and they did not work!I looked  at te DEVICE DRIVERS and there is NO LONGER a BLUETOOTH icon??I tried rolling back the driver, and still NO Bluetooth??Any help would be appreciated.At one point I also clicked on the NEW Bluetooth DESK TOP ICON and a box came up for the BLUETOOTH LOCK and indicated that there was a problem with the DRIVER?My M900 Bios is FWKT54A 6/24/16 ,WIRLEES CARD IS INTEL AC 8260.The auto DRIVER UPDATE did not update my BIOS could that be a problem? 

More replies
Relevance 38.13%

Win 7 64 Windows Update not working (post migration), nor is Windows Update Readiness tool installing. I have renamed catroot and stopped services, nothing working. I just migrated HD to a hybrid solid state (Seagate Momentus). I had this problem both with Acronis 2009 and Acronis 2013, and Windows Backup would not create a recoverable partition (always said file not available about 30% through the recovery). I have installed the Intel IDE ATA drivers, and scoured the help topics. I have tried everything. I could really use some help.

The error I receive when attempting to install the Windows Update Readiness Tool is:

"Installer encountered an error: 0xc8000247"

The Microsoft FixIt and Control Panel FixIt says it has fixed the problem, but Update does not work. Nothing is working, but the OS is healthy, the disk is healthy. The sfc/scannow doesn't reveal any corrupted components.

I followed all of these instructions before attempting to install the Windows Update Readiness Tool:

Windows Update Service and Windows Module Installer Service are the two basic services responsible for all your updates to install correctly.

If Windows Updates are failing, then my first step would be to check if these two services are running.
Windows Update Service enables the detection, download, and installation of updates for Windows and other programs. If this service is disabled, users of this computer will not be able to use Windows Update or its automatic upda... Read more

Answer:Windows Update is not working/Update Readiness Tool won't install

Windows Update Posting Instructions

1 more replies
Relevance 38.13%

Tried unsuccessfully to update Cf, got this msg about cause:
Problem Event Name: CLR20r3
Problem Signature 01: updater.exe
Problem Signature 02: 1.0.8.0
Problem Signature 03: 589e5c64
Problem Signature 04: System
Problem Signature 05: 4.6.1087.0
Problem Signature 06: 583e5c41
Problem Signature 07: 1f9f
Problem Signature 08: 6b
Problem Signature 09: System.Net.Sockets.Socket
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
 

More replies
Relevance 38.13%

A recent automatic security update for IE7 wouldn't load. I went to the update site and tried to download KB938127. It told me it was incompatible with my files in XP Pro.

I don't use IE and Firefox is set as my default browser. Should I worry about this or just ignore it?

How do I get rid of the shield sitting in my sys tray? I know all it contains is the IE update.
 

Answer:IE Security Update will not load

Even though you do not use IE, you do need to keep it patched simply because it is joined so closely with Windows.

I found two reasons why this update might fail to install:
1)Cryptographics services are disabled
2)Security policy preventing install

For the first, go into your services and be sure this is set to Automatic
source: http://www.blackviper.com/WinXP/servicecfg.htm
for what XP Pro services should be set to

For the 2nd, download the update from here:
http://support.microsoft.com/kb/938127

then, disconnect from the internet and turn off your antivirus and try to install it.
 

16 more replies
Relevance 38.13%

Sorry to bother you yet again!

I did Windows updates ona new harddrive and after one of them, I got an ad on my IE6 start page which is set for google. The ad is to install the google search toolbar or something. It didn't look like something I wanted and I didn't try to close it, except with Alt F4. I tried an early system restore point to get rid of it and I deinstalled IE6 from Windows Components, and put in a new version from I think ZDNet. The same problem is there, the ad, but since then additionally, I can no longer update my AVG or Bitdefender online updates.

For AVG I get: "Could not install AVG Anti-virus kernel interface. Application cannot run."
I deinstalled AVG and restalled it without effect.

When I tried to run BitDefender I got: BitDefender failed to update the virus definitions. Although it might be useful..."

After that, I decided to come here. I was not able to run Panda. Counter Spy found nothing. I didn't run BitDefender without the new definitions.
I'm attaching logs for CounterSpy, ShowNew, RunKey, and HJT.

So sorry to be asking for help again!
abri
 

Answer:can't update antivirus or load avg

CounterSpy log
 

9 more replies
Relevance 38.13%

Hi...I'm having a problem with a page not loading. For some reason my computer will not let me get any windows updates. Everytime I go there, through every means possible, the page is blank and white. It just hangs. Then I have to use my taskmanager to get out of it. I'm getting very discouraged. If anyone out there has a way of fixing this, I would shout out their name from my rooftop, with pure jubilation!!!
All posts will be read. Thanks
Also will accept an email [email protected]

Answer:Update page won't load....

hi moon,

first of all have you scan your computer for any sparwares and viruses? if not try that. also is the windows update site the only site not working for you? other websites work ok?

1 more replies
Relevance 38.13%

Hi, I ran the Lenovo update software and it updated my BIOS. After the restart - the computer wouldn't load. XP tries to load and then there is a brief sec where there is a blue screen (too fast to read what it says) and then the computer restarts again. When it was updating the BIOS it said it was creating a bios.bak file to backup the old BIOS - how do I revert back to the old BIOS? Currently in the setup screen it says that the BIOS version is 68ET35WW(V3.03) but I cannot start Windows.(safe mode doesn't work as well) Any help will be much appreciated.

Answer:Can't load XP after a BIOS update

Check your BIOS for an option called "AHCI controller working mode" or "SATA controller working mode" and revert it's settings.





//help will save the world

3 more replies
Relevance 38.13%

I just got a new R61 with Vista Home Basic, and everytime I try to run the Update Manager I get a message that says Program: C:\Program Files\Lenovo\System Update\tvsu.exe and says the program has asked Runtime to terminate it in an unusual way. Any thoughts on why it's doing that? I deleted the Update Manager and reloaded it from Lenovo's website but still get the same message. Thanks!

More replies
Relevance 38.13%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.

Answer:Windows update will not load

Hi, try the following making sure each stage is clear or fixed before proceeding:

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed- else do not proceed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

From an admin command prompt run
sfc /scannow

Download and install Tweaking.com's free cautious repair tool
Follow the steps as appropriate and select only the Windows update repair.

4 more replies
Relevance 38.13%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.

More replies
Relevance 38.13%

I am having an issue with Windows Update. It will not load!

Answer:Windows Update will not load

Try the blue "run now" box on here:
Fix Microsoft Windows Update Issues

2 more replies
Relevance 38.13%

A week or so ago, I went to open a .pdf and it said there was an error. I bypassed this by opening the file in Google Docs. Yesterday, I updated Adobe (I'm not sure if it's Acrobat or Reader). Today, I finally restarted my computer. It's now in an endless cycle of booting. I've tried booting it in Safe Mode, Last Known Good Configuration, and Normal, but it never gets past the XP logo with the animated progress bar. I inserted the XP disc and tried to preform a system repair, but to be honest, I don't really know what I'm doing. I tried the CHKDSK, but it didn't reveal anything. Instead of tracking down and fixing the error, I'd rather just delete Adobe off my computer since I'm confident that's causing the problem, but in the command prompt, it says access is denied. I'm hoping someone can help me out. Thanks!
 

Answer:XP won't load after Adobe update

7 more replies
Relevance 38.13%

When I launch the settings and go to Update, it loads forever instead of opening the options.

I have Googled to try to solve this issue but nothing has worked for me.

I've tried running this diagnostic: https://support.microsoft.com/en-us/gp/windows-update-issues/en-us
I've tried running these .bat files to reset Windows update: Windows Update - Reset - Windows 7 Help Forums

So far nothing has worked for me unfortunately. I am wondering if anyone here has any other ideas of what I could do to fix this problem?

Answer:Windows 10 Update Will Not Load

Welcome to Ten Forums. Since resetting windows update did not work I would try the check the system file integrity. This is from the tutorial forum. https://www.tenforums.com/tutorials/2...dows-10-a.html .

4 more replies
Relevance 38.13%

I have had itunes with an Wiondows XP 32 bit pc for many years. I now have a new pc with Window 7 64bit, i7-2600, 16 G RAM, and 1T of memory. My problem is I can not load itunes 10.6.3 into the pc. When I try, the program says it was interupted and the change did not take place. It then asks me to press finish or cancel. When I press finish, the program says thank you and gives me the4 option to store the program in G. I no longer have a G as that has been replaced by H. There is no opportunity to change the save location to H. and simply says to load the external disk, which does not exist.

When I try to uninstal the itunes programs by strting with itunes first, the pc says that ituneshelper. Resources is not a valid short name. Any suggestions on this?

Answer:Can't load update for itunes.

Welcome to Seven Forums, David.

It appears that you have already downloaded the 64-bit iTunes Setup Program from Apple Web Site. I think the latest version is iTunes 10.6.3.25 Setup.exe. If so then unistall iTunes from the Computer that you had intalled earlier and clean the Registry of all iTunes related keys and values. After that reboot and then install the latest version afresh.

Try installing in safe mode first as there is no harm in trying but I don't think it shall install.

2 more replies
Relevance 38.13%

Was running 10 with only a few problems. Received notification to reboot. Circle just spins & spins! Have tried repeatedly. Only online fixes involve messing with registry which I don't want to do!

More replies
Relevance 38.13%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.
 

Answer:windows update will not load

10 more replies
Relevance 38.13%

Windows XP Professional
IE 6 SP1

This workstation had been hit with a virus and malware had been installed.
Cleaned the virus off with Trendmicro and using AdAware SE to clean up the malware.

Now Windows update will not load. IE opens but the window remains white. PC is configured to receive Microsoft updates from our Software update server but can't verify the updates because Windows Update will not come up. IE will browse to other web sites.

Ran HijackThis. The log is below. Any help you can offer will be greatly appreciated.

Logfile of HijackThis v1.99.1
Scan saved at 9:00:40 AM, on 3/16/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\WINDOWS\System32\NWTRAY.EXE
C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe
C:\Program Files\Winamp\Winampa.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Adobe\Acrobat 4.0\Distillr\AcroTray.exe
C:\Program Files\Conversions Plus\MacName.exe
C:\Program Files\WinZip\WZQKPICK.EXE
C:\WINDOWS\System32\NALWIN32.EXE
C:\Temp\hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer,SearchURL = http://www.popupsearches.com/sidesearch.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://smbusiness.dellnet.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.capcitypr... Read more

Answer:Windows Update will not load

You have been hit by the new Bube.d (aka Win32.Beavis) virus which severely messes with some Windows settings,including the update feature.

Save the BOLD to notepad,as Fix.reg as"Type" all files

=====================================

Windows Registry Editor Version 5.00

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate\DisableWindowsUpdateAccess]

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"=dword:00000000
"AUOptions"=dword:00000000

[-HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoDevMgrUpdate"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"NoUpdateCheck"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]
"DisableWindowsUpdateAccess"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
&qu... Read more

1 more replies
Relevance 38.13%

I don't see much written on this, so it would seem I am one of the few unlucky people that can not get this critical update for EI9 to load. Have tried all the suggestions Microsoft suggests and even had it to a tech to look at, no simple solution seems to be available. Where else can I try to get some help and what's everyone's opinion if I just don't download this update?
Thanks!
Cora

Answer:Update KB2647516 will not load

What error do you get when installing it?
Have you tried installing in a Clean Boot?
Have you checked for malware using a malware scanner - not just an AV? What AV/Malware apps are loaded? When were they last updated?

What other updates are you having problems with, if any?

1 more replies
Relevance 38.13%

Hi, I was sent here by Chemist who was a great help in spyware removal. I just have a windows update that tries to load on shutdown, but fails every time. How can I get the update information to you? I am a techie rating of about 3 out of 10, but I try to follow innstructions. Thanks. :)

More replies
Relevance 38.13%

When i try to load the newest Simple Tap update, during install, I get a 1316 error, network problem. To be more explicit, here is the error message:Error 1316: A network error occurred while attempting to read from the file C:\Windows\Installer\Lenovo SimpleTap.msi

Answer:Simple Tap Update will not load

To be more explicit, here is the error message: Error 1316: A network error occurred while attempting to read from the file C:\Windows\Installer\Lenovo SimpleTap.msi

1 more replies
Relevance 38.13%

Hello, thanks for taking the time to look at my issue. I just ran into a problem with my computer. My computer is running windows 7 64bit.

I got a new graphics card in today and put in my computer to crossfire. After I booted my computer back up it loaded fine, albeit slow, but crashed while installing new drivers for the card. Since then I haven't been able to get back on to that SSD(boot drive).

I can't access the advanced boot options to roll back the drivers that were installed as soon as the SSD was booted up.

I've tried numerous suggestions that I've found from other troubleshooting threads on the forums including; looking in my bios for a shortcut, pressing f8 twice per second, holding f8 down, pressing f8 as soon as the bios screen goes away in between the system attempting to load.
I just can't get to the advanced boot menu!

Any suggestions?

Edit: I should say that I AM able to load up windows on my storage hdd which also has windows 7 64bit installed; however, it doesn't even register that my SSD is plugged in under device manager or just computer.

Edit 2: This is crushing my life please help! lol

Answer:SSD Won't load my OS after driver update

Boot into BIOS setup to make sure SSD is detected and set first to boot, after DVD drive.

Then boot into Win7 DVD or System Repair Disk to run Startup Repair several times. It should offer to automate System Restore. If not and it fails to start Win7, boot back into Recovery Options to run System Restore and Disk Check

If SSD is not detected and is under warranty contact it's maker's Tech Support for help to test and if necessary RMA it. Otherwise replace the cables, test the drive using maker's diagnostics followed by Disk Check.

4 more replies
Relevance 38.13%

So this Android Update keeps trying to load and fails. Is there a way for me to remove this from the update list? I know you can remove Updates that "have" loaded, but what about ones that sit in the load stage? Thanks.

More replies
Relevance 38.13%

So this Android Update keeps trying to load and fails. Is there a way for me to remove this from the update list? I know you can remove Updates that "have" loaded, but what about ones that sit in the load stage? Thanks.

More replies
Relevance 38.13%

For over a week, when I start my laptop, it seems to start normally, then I get a screen that says "updates could not load and changes are being undone, don't turn off my computer'.  Does anyone know what is going on?  I am using Windows 8.1.
 
I have Panda Security, and Anti Super Spyware, both paid for.  I just got rid of Win Patrol free, although I have used it on my old laptop without problems.  I have not purchased or downloaded any other programs.
 
Any ideas how I can find out what is going on?

Answer:Windows update won't load.

I'm just offering some advice. I'm not a Computer expert, just so you know
 
I had this issue on 2 different PCs, both with Windows 8.1.
It would force me into updates, and then say that the updates were unsuccessful and that it is undoing the changes.
It stayed in a restart loop of 'undoing changes' until I went into Safe Mode (using Shift + F8) and did a System Restore.
I have now changed the settings on BOTH computers to not automatically install update. I don't need that kind of trouble! LOL

1 more replies
Relevance 38.13%

I started the day off yesterday with a clean computer. Formatted the hard drive and installed a clean version of Win7Pro. I got to install Windows and load it up for the first time, so I proceeded to install my drivers on my MoBo *Asus Crosshair IV Extreme* and restarted the computer afterwords to enure everything was working.

Now here's where my problem occurs. I plugged my computer into the internet *wired* and after it automatically updated Windows, it restarts the computer. All is good so far. It starts loading windows, and gets to the Windows background where I normally WOULD log-in, but it never finishes loading the log-in screen.

I attempted to repair windows, and it said Windows was installed properly and there is nothing to fix.

I reformatted, re-installed, and this time I didn't give it a log-in password so it would automatically go to the desktop. Installed my ethernet controller, and restarted my computer.

I wired my computer to the internet now, and it automatically downloaded and installed the newest updates for windows again, restarted the computer, an this time it got to that EXACT SAME SCREEN, however I have no log-in so it was just the desktop background screen that it got to, and it never finished loading windows. I just had the background, no files, no task bar.

When I press ctrl+alt+del my screen goes black and nothing happens.

I went back and repeated the process but I didn't install the ethernet controller, this time I installed a USB... Read more

Answer:Win7Pro won't load after Win Update/etc.

So you know it can boot into Windows 7 because it was working before the updates.

Some updates may take a long time to complete. When it is being non-responsive, do you see any hard drive activity?

Have you tried starting in Safe Mode after the problem occurs?

When Windows Update offers update, you can set it so you will be able to see what is offered and not take any of the hardware type of updates...

2 more replies
Relevance 38.13%

I require updates for mi Windows XP home edition. However, I cannot load the Widows Update page!

I open IE 6 and the page just loads forever!

Any suggestions?
 

Answer:Cannot load Windows update.

Are you using a firewall and if so, which one?
 

3 more replies
Relevance 38.13%

Hello,

I've got a Dell laptop here that isn't functioning properly. I can't get this to work for the life of me! I am currently using this laptop with a different hard drive, it's the install on the SSD that doesn't work. I know that the quick fix would be to simply reload windows, but I don't want the quick fix.

Basically, laptop works with Windows 7 install on a hard drive, no issues. On the SSD, where the ONLY applications loaded are Office 2013 and Firefox (and all the latest updates), the internet does not work (I can ping yahoo.com and get a response, so DNS is fine). The problem persists on IE and Firefox. I have no AV software other than MSE, and the problem persists in Safe Mode w/ networking. The hosts file is clean. The internet worked on the computer just fine when I loaded it, I hadn't used the SSD in a while and when I popped it in, the internet wasn't working. I believe something is getting in the way of port 80, but I can't figure out what. I have disabled all startup applications and all nonwindows services. The computer does not have bonjour. I have cleared history/cookies to no avail. I can't find anything suspicious in the running processes. I can't seem to turn off the windows antimalware process to test that, though.

Any ideas?

Answer:Internet not working, windows update, ping, DNS, etc. working fine

I decided to run hijack this and found two BHO's. It's funny that on my new install that I used a handful of times, I have adware, but on this install that's been going for years, I have nothing. Oh well. So I had "Crossrider" and "Coupon Companion". I removed all traces of both, yet still no go. It looks like this managed to install itself on 12/2... which had to be damn close to the date that I bought the SSD, however, I had internet activity as recent as 12/26. Here's the log of what Coupon Companion did:

1354500268 -
1354500268 - --------------------------- Installer started ---------------------------
1354500268 -
1354500268 - appid: 4493
1354500268 - installername: 4493.exe
1354500268 - installertype: 12417
1354500268 - appname: Coupon Companion
1354500268 - publisher: 215 Apps
1354500268 - publisherid: 390
1354500268 - installerfullversion: 1.24.151.151
1354500268 - platformversion: 1
1354500268 - installerscriptversion: 24
1354500268 - bhoversion: 151
1354500268 - helperversion: 151
1354500268 - bhoguid: 11111111-1111-1111-1111-110011441193
1354500268 - scrambletoken: 8093c230043101303486692df6c812c4
1354500268 - Installing IE extension
1354500268 - Firefox extension is bundled
1354500268 - Chrome extension is bundled
1354500268 - CmdLine:
1354500268 - Function onInit started.
1354500268 - Read the OS: V7
1354500268 - App registry path: Software\AppDataLow\Software\Coupon Companion
1354500268 - srcid: 100086
1354500268 - subid: default
13545002... Read more

3 more replies
Relevance 38.13%

My Targus amu73ap mouse that was workinG perfectly with 8.1 is not working on either my PC or Asus T100 hybrid after the update to windows 10. I keep getting a message saying that the usb device malfunctioned.

Answer:Previously working USB device not recognized after Windows 10 update, how can I get it working?

You may need to try rolling back your USB drivers (or install the original drivers for your mouse from the manufacturer). I had a LAN driver get screwy with Win10 and I rolled it back to the original Win7 driver and it resolved the issue.

2 more replies
Relevance 38.13%

I am unable to use the mic in my headphones with the laptop at the moment. With the headphones plugged in the 9360 just defaults to the inbuilt mic which is terrible.
Ever since a driver update, (I can't remember which), the maxxaudio popup that allows you to choose your mic input stopped appearing and the audio sounds very flat.
I need assistance in this situation as it's dells responsibility with regards to MaxxAudio, as it seems I have no other choice of audio driver.

More replies
Relevance 38.13%

I recently installed a gadget to keep track of the CPU and RAM usage on my 3 month old Edge 14. The gauge shows the CPU running at 50-60? capacity and RAM at 90-100% capacity almost all the time. This is under very light load, internet surfing and just looking at the desktop. At times they will run in the 30% range for about 5 minutes, then suddenly jump directly to 60-90% without any activity on my part. Almost like someone threw a switch. It will stay that way for 15-20 minutes, then suddenly drop back down. This has resulted in noticeably slower general operation (sometimes I can't get the pointer to move for 10-20 seconds) and slower internet browsing. All the programs running at startup are programs created by Lenovo or Microsoft, or Adobe, etc, and installed by Lenovo.  Any ideas? Allan

Answer:CPU and RAM working at 90-100% under light load

control-alt-delete, open task manager and look and see what processes are running.  sounds like somethings in there hogging up resources. 

6 more replies
Relevance 38.13%

My computer has had some issues lately and one of the techs that my employer uses installed Symantec anti-virus which seems to have fixed the previous problems.  Now however I cannot access internet explorer.  I use internet explorer to access my grade book through edline because firefox will not allow it.  When I try to pull up IE the page comes up but stays blank.  I read on here that I can do something through the tool bar on IE but I can't even access that.  I also found a thread that said to reset the win-soc through the cmd (or something like that) but that didn't help either.   Firefox is working fine though and I am on it right now.

Answer:Firefox is working but IE will not load

my husband had the exact same problem after we downloaded 3.6 version firefox... then about few hours... the IE7 does not work as i have to use that browser for work as well. I am assuming it is a new virus going on around because, my husbands gmail account would not recognize his password.. so .. and now my desktop computer is infected as well.. i have tried everything few times.. and its still a problem on my computer.. so yea.. I'm pretty sure.. things will get fixed... asap.

12 more replies
Relevance 38.13%

Hello. I recently decided to build a pc. However when it came to powering it on, nothing. The CPU, gpu and top fans are working but the front and rear fans are not. The little speaker isn't beeping either. Anyone have any idea what's going on?
Parts : CPU: AMD Athlon X4 760k. GPU: Sapphire Radeon R7 260x. Motherboard : MSI A78M-E35. Memory : Crucial Ballistix Sport 8Gb kit. Storage : Samsung evo 120gb ssd. PSU : Corsair CX430M (430W)

Answer:Pc won't load up. Most fans working,

It sounds as though the mobo is missing a power supply. Did you make sure the main ATX connector (20pin) had the additional 4pin part attached before connecting? (they are made like that as some older boards only have a 20 pin connector).

2 more replies
Relevance 38.13%

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

Answer:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

9 more replies
Relevance 37.72%

Folks,
On my Win 7 Lenovo laptop the Win 10 update download has failed three times in the last two days.
a few weeks ago I removed MS Security Essentials because it was having updating problems and replaced
it with Eset Node 32 A/V. I am also using Spy-Bot S/D and Malware Bytes.
Any advise will be appreciated.
ROGPILL

More replies