Computer Support Forum

Missing Information.

Question: Missing Information.

Have an annoying quirk with my Windows 10 Pro 64 bit PC

If I go into 'settings' - then update and security - fine.
But when I click on View installed update history, up comes a blank page with no detail. Your suggestions on how to overcome this annoyance appreciated.
Thanks in advance

Relevance 100%
Preferred Solution: Missing Information.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Missing Information.

Hi, what's your current Windows build?
(Windows key + R, winver).

Have a look here too:
If you've done an upgrade without further updates, the Update History will be wiped.

2 more replies
Relevance 47.15%

Hello, I am a new member and I have a problem, I use utorrent as download manager and everyday when I open my pc all the previous days downloads and any other action completed on my pc are gone and anything I downloaded on utorrent is gone and 2 specific things I downloaded and deleted from utorrent keep coming back and they have been deleted and cleared from trashbin, I am running win 7 ultimate 32bit  os, I am in school on line and this is scary stuff any ideas?? thank you

Answer:missing information

Please run the ESET OnlineScan
Hold down Control and click on this link to open ESET OnlineScan in a new window.
Click the button.
For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)
Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.
Double click on the icon on your desktop.

Check "YES, I accept the Terms of Use."
Click the Start button.
Accept any security warnings from your browser.
Under scan settings, check "Scan Archives" and "Remove found threats"
Click Advanced settings and select the following:
Scan potentially unwanted applications
Scan for potentially unsafe applications
Enable Anti-Stealth technology

ESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.
When the scan completes, click List Threats
Click Export, and save the file to your desktop using a unique name, such as ESETScan. Include the contents of this report in your next reply.
Click the Back button.
Click the Finish button.
 
 
 
Please download Malwarebytes Anti-Malware.
 
1)  Double-click on mbam-setup.exe, then click on Run to install the application, follow the prompts through the installation.
 
2)  Malwarebytes will automatically open.  If this is the first time you have run this version of Malwarbytes you will see an image like the one below.
 

 
Click on Update Now, after Malwa... Read more

1 more replies
Relevance 47.15%

Have an annoying quirk with my Windows 10 Pro 64 bit PC

If I go into 'settings' - then update and security - fine.
But when I click on View installed update history, up comes a blank page with no detail. Your suggestions on how to overcome this annoyance appreciated.
Thanks in advance

Answer:Missing Information.

Hi, what's your current Windows build?
(Windows key + R, winver).

Have a look here too:
If you've done an upgrade without further updates, the Update History will be wiped.

more replies
Relevance 47.15%

Sometime last week, I noticed that my Favourites were no longer accessible, even though the yellow star is there. Also, I cannot download any updates due to the fact the ACTIVE X bar is missing, along with Tools, File, etc which used to sit on top. I cannot access the Advanced option as I cannot enter Tools from the top. Any help much appreciated. Thanks

Answer:INFORMATION BAR MISSING ON IE

With IE open...go View/Toolbars. Tell us what is checked.

There is also a quirk in IE that makes your upper panel disappear if you hit the F11 key accidentally. To bring everything back, hit the F11 key again in IE.

If you get any error messages...please post the exact wording of same.

Louis

11 more replies
Relevance 47.15%

I go on one site regularly and fill in lots of boxes
with information but the programme is not saving it now as it used to.
Any help in resolving this will be appreciated
Cheers
Ian

Answer:Information missing

Operating system?
Browser?
Site?
Might help us to diagnose the problem!

3 more replies
Relevance 46.74%

Hi all!

Hi I hope someone can advise me, I have attached a snap shot of what I'm referring to, basically, in the folder that I have music in, some info seems to be missing, for example the duration of the songs don't seem to be showing, I've gone through everything i can think of, I only noticed when I put the cursor over the file then seeing it only the last seconds rather than see the full track length. Please can someone advise me. Thanks

Answer:Information on file missing

Hello Dubstar, and welcome to TSF!


Quote:





Originally Posted by Dubstar


Hi all!

Hi I hope someone can advise me, I have attached a snap shot of what I'm referring to, basically, in the folder that I have music in, some info seems to be missing, for example the duration of the songs don't seem to be showing, I've gone through everything i can think of, I only noticed when I put the cursor over the file then seeing it only the last seconds rather than see the full track length. Please can someone advise me. Thanks




If you right-click on the headers, can't you "customize" the headers there, and add the missing information?

4 more replies
Relevance 46.74%

i went to look at system info before buying a external dvd burner and instead of system info ..i saw this



tried hardware ..got this



tried to restore ..but sys will not go past 5/22

have no clue....have had stroke...can do some things..but on new things...like this...need step by step...sorry for the slowness of my grey matter

thanks for any help
 

Answer:system information missing???

Go to the following webpage and read the information at the Microsoft Knowledge Base link listed below:

MSKB Article ID: 323209: Msinfo32.exe Generates a "Can't Collect Information" Error Message​
Good Luck! -- COMP​
 

2 more replies
Relevance 46.74%

Hi to everyone who reads this.

When I want do a CHKDSK on C, I get prompt to schedule this task the next time my pc boots, no problems here though.
But after booting up I don't see the CHKDSK-information displayed as it should in normal circumstances. My screen stays black during the CHKDSK Scan, whilst I believe the scan runs as it should be. I derive that thought from the fact that I had a disk surface issue, and after doing the CHKDSK scan the problem was gone.
So the only thing I'm lacking is the information while in progress.

Does anyone have a clue on how to fix that?

Thanks for your time and advice.

Best regards Carlo

Answer:CHKDSK Information is missing...

Hello Carlo,

Did you change your boot screen by chance? Doing so results in a blank screen while chkdsk runs as boot. The information at the top of the tutorial at this link above can give more details about how you can use the sfc/ scannow command to restore the default boot screen to see chkdsk afterwards.

For now though, the tutorial below can show you how to read the chkdsk log to see what it said.

Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Forums

Hope this helps,
Shawn

5 more replies
Relevance 46.74%

After running msinfo32, I find out that my System Information isn't there.
Can somebody tell me get it back?
Thanks in advance.
 

Answer:My System Information is missing.

6 more replies
Relevance 46.74%

Hi,today i've got an msg on my startupPhoto in the linkhttps://s22.postimg.org/8t8ime5k1/20161109_202957.jpg

Answer:Missing system information

Any help on fixing it ?

1 more replies
Relevance 46.74%
Relevance 46.74%

Windows XP. When I select System Information in System Tools, it opens up the Help screen. If I enter msinfo32.exe in run, it also opens up the Help screen. Have I got a screw loose?

Answer:System Information missing?

Maybe running sfc /scanow will replace a dodgy file.

10 more replies
Relevance 46.74%

Under system information in control panel the cpu and ram information is missing. Its not important nor does it impact performance in any way just curious why?

Answer:Missing information under system.

hmm...
is the windows management insturmentation (WMI) service running?

Have you tried just rebooting and re-running the index score as well?

8 more replies
Relevance 46.74%

hi guys...I use windows 98 on my laptop and recently every time I boot the windows I get the message (missing regestry information.continue loading) and I have to press ok to continue.Any body knows how to get rid of this annoying message.thanx

Answer:missing registry information

A limp answer but.......If the problem has occured within the last 5 days you can boot to the command prompt only and type.... Scanreg /restore -then pick a date before the present trouble and you should be home free.

1 more replies
Relevance 46.74%

Hello,

I recently recovered from a trojan on my Windows XP machine, and had to re install. Everything worked perfectly, now I'm setting up my internet and after that I will update my new anti virus program.

So here's the problem, my friend Rob is helping me set up my internet and asked for my motherboard information, so I followed his instructions and launched the DirectX Diagnostic Tool. I went to the Display tab, and under the "Device" section, everything was entered in as n/a or just nothing.

The actual text:

Device

Name:
Manufacturer: n/a
Chip type: n/a
DAC Type: n/a
Approx. Total Memory: n/a
Current Display Mode: 1400 x 1050 (16 bit) (1Hz)
Monitor:

How can I find my information and put it back in? If I have to download something I can just transfer it from my notebook to the machine itself, I'm just really confused and need some help. My computer is made by Dell and the model name is XPS 630i.

I also have the information in the Sound tab missing too... But I do have my Realtek stuff plugged in from my monitor, but that's all I know.

Any help would be appreciated.

Answer:dxdiag information missing

Have you installed all the required drivers?

Open Device Manager and post any device errors.

5 more replies
Relevance 46.74%

When I open System Information I get a messageCan't Collect InformationCannot access the Windows Management Instumentation Software. Windows Management files may be moved or mising.What can I do to return to normal.Russell

Answer:Missing System Information

System Restore?

9 more replies
Relevance 46.74%

This is what it looks like it realizes I have a dual core aka two processors, but it can't figure out what it is exactly.
 

Answer:Dxdiag is missing information

16 more replies
Relevance 46.33%

I am trying to install Adobe Photoshop cs4 on a new computer in my network. I paid for it online and I have all the legal work and recite but one small problem; the email that had all of the information for it was deleted. I have cs4 installed on another computer so I still have it all but what I don’t know is how the serial number is ordered.

By that I mean I have this
Example: ###########

and need to know the grouping of the numbers in order to submit it
example: ###-###-###

is there anywhere I can go or look in the program itself to find out? ---thanks
 

Answer:Solved: Photoshop: missing information

I am sure if you contact seller with receipt and invoice #, they will gladly resend an e-mail with required info.
 

3 more replies
Relevance 46.33%

I have run into a problem with my computer where I run msinfo32.exe, my dialog says "Can't Collect Information: Cannot access the Windows Management Instrumentation software. Windows Management files may be moved or missing."

Also my Windows Rating disappeared from the system properties screen, but not from the performance information and tools window. Also my system information appears at the bottom of the my computer window, but not in the system properties.

Ever since this disappeared I have having trouble with my remote desktop connection into my computer before this wasn't an issue and nothing new was installed or removed.

Can anyone help???

I am using Vista Ultimate 32bit version.
 

Answer:System Information (msinfo32) Missing

15 more replies
Relevance 46.33%

Good evening,
Some days ago, after a badfunctioning, my computers does not boot, and the error that appears is BootMGR Missing.
I have been reading in many forums about the error.
I also wrote to Toshiba, as my computer is a Toshiba Satellite T130-T132. They told me that I would have to reinstall the Windows 7, AND that if I wanted to recover the info in C I had to take the disk out of the computer.
As I'm working in Haiti until de end of the year, and I need to recover important information that I could not back up - and against Toshibas' technique recommendation - we took the disk out of the laptop.
The problem is that we could recover all the disc D, but not the disc C, which is the one that I need (My Documents).
Could somebody advice me on how recover this information in the disc C before reinstalling Windows? It is important to say that we tried to boot from CD. The laptop does not have CD reader, and it does not recognize the external one.
Many thanks in advance for your advice.
Best regards,
Paola

Answer:BootMGR Missing and Information Recovery in C

http://www.techist.com/forums/f127/h...a-win7-155100/

Take ownership of the folders on the new PC and you will be able to access the files. If they are showing up. If they are not then you have an entirely different problem.

1 more replies
Relevance 46.33%

I have tried to access system information in system tools. The window opens and a system summary list is shown in the left pane. But in the right pain the message. "cannot access the windows management instumentation software. windows management files may be moved or missing". I have done a search for the files on my hd. but cant find them.help pleaseIam running win xp pro

Answer:system information missing in winxp

click here may help.

6 more replies
Relevance 46.33%

Can someone help me to solve this problem? I cannot get any information everytime I go to my computer's system information. Thanks!
 

Answer:System Information (msinfo32) Missing

Click Start - All Programs - Accessories - Command Prompt and then type in msinfo32 at the command prompt window. You'll get the System Information app running.
 

3 more replies
Relevance 46.33%

Hi I just got my lenovo G50-70 From the service center,The reason why i send my laptop because the screen is totally blackEverytime im trying to turn it ON And i heard some beep sound everytime im connecting the power  So the technician told me that they reflash my bios, and my laptop now is working But when i tried to go to bios i notice some imformation is not showing PRODUCT NAME INVALID LENOVO SN INVALID I just want to know if this is normal?  Thank you


























DSC_0727.JPG ?3664 KB

More replies
Relevance 46.33%

I woke this morning and the green thing that appear when we change the sound level or the luminosity level doesn't appear anymore. Where can I put this back?

Answer:Light and sound information missing

Hello Trunks_01, please take a look here. The problem seems to be arrived within the newest updates. May be the hints in that thread are helpfull to your problem.Message Edited by Agotthelf on 03-02-2009 10:49 AM

1 more replies
Relevance 46.33%

I've used Adobe's Framemaker 8.x for several years on a Dell Inspiron running Vista Home Premium. Lately, when I try to open the program I get the message "Registry information invalid or missing."

I tried all the things in Adobe's knowledge base, to no avail.

I tried disabling everything except the FrameMaker program; still didn't work.

I would like to re-install and start over. However, I purchased it as a download and I copied the information they sent me to a backup disk. That disk has on,y "repair" "modify" or "uninstall" as choices. I choose "repair" or "modify" and then Framemaker will open.

Does anybody know how to fix the registry editor? I downloaded and used Registry Mechanic, but that didn't work.

From what I read, I don't want to be messing in the registry unless I really know what I'm doing!

Thanks,
Granny.Nerd
 

More replies
Relevance 46.33%

I have a Acer Aspire 5733z-4851 500gb HD & 8gb ram, using windows 7. When I connect to the internet the page loads up but each page is missing some information, Any page with a box saying click here to continue the box does not show (I have no way to continue). Checking email is a problem, PCH with a yellow or blue box "click here to continue" the box does not show up. On ebay alot of information is missing on the selling page. This problem is not just limited to the internet, when I try to trouble shoot this issue some information is missing on some pages. Can any body help me with this issue. Thank you all for any help.

Answer:Problem with missing information on internet

When did the issue first start? Have you tried a different web browser (firefox, chrome)? Have you tried going back to a previous restore point, clearing the web browser cache or resetting the browser back to defaults.

5 more replies
Relevance 46.33%
Answer:directplay registry information missing

Hi to anyone who might help.I have been having problems with windows registry. I turned my computer on the other day and a lot of the drivers had corrupted. All the files were still there, but wouldnt run for one reason or another, various error messages. Managed to sort most out by reinstalling, but directplay in directx doesnt seem to want to play!I have a hercules prophet 4000xt.Also some games freshly installed still have error messages. eg lego game, invalid page fault at A3D.DLL.Any ideas out there?ThanksMike

1 more replies
Relevance 46.33%

I am using Home Premium, and since getting the OS I have felt as though my graphics performance rating was quite low (2.0 for a GeForce 6200 256MB AGP). This was confirmed when I saw other people with the same card, with lesser systems getting higher ratings.

To resolve this I have been trying to get the newest drivers, etc... Well a few days ago, to compound this issue I went to go look at my Windows Experience Rating, and it was gone... Here is what I see when I go to Peformance Rating and Tools.

I talked to Microsoft on live chat for over 2 hours last night, but it took that long for them to even begin to troubleshoot this. They had me register jscript and vbscript dlls, but to no avail.

Anyone have any ideas?
 

Answer:Performance and Rating Information Missing?!?!

I'd see if you can do a System Restore back to when it was working.

The drivers for that card should be located here: http://www.nvidia.com/content/drivers/drivers.asp

What kind of score would you be expecting, most 6100/6200's I've seen score in the 2x range.
 

1 more replies
Relevance 46.33%

Can someone help me to solve this problem? I cannot get any information everytime I go to my computer's system information. Thanks!
 

Answer:System Information Missing (msinfo32)

9 more replies
Relevance 46.33%

As the title says, all of a sudden i have missing file info in the details pane, i have a lot of digital media and usually when i click on it it shows me every from its name to audio type, date modified etc..all of a sudden it no longer shows me what audio, chapters or subtitles etc..from the screenshot below a lot of info that used to be there now isnt....any help would be appreciated

Answer:missing information in the details pane

How to Customize the Details Pane in Windows 10

1 more replies
Relevance 46.33%

I am looking for the components/parts used in the T500 Model 2082-52G. Normally I can find them on the lenovo Hompage, but there is only very less Information for that Model (how come?). Where do I find out more about the exact product and model numbers used as components like the video cards, the modem, the motherboard, the chipset, the dvd, the lan card, the wlan card, the wwan card and all the other parts used?Any Ideas? I normally used the search function here: http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and entering the modell number in the Enter a product number text-field on top.

Answer:T500 Parts information missing

Please take a look in your T500 HMM. I think the parts look up information will be restored in a while.

1 more replies
Relevance 46.33%

I have two alerts for Sensitive Account Credentials Exposed, "Credentials were exposed in cleartext using LDAP simple bind.  He of these alerts are showing as being from several source machines using several different user accounts.  When
the alerts first started the console would should the first date detected 1/10 and the last date detected 1/23.  If I would export the data to Excel I would see all of the detected events 1/10 - 1/23.  I fixed all the problems and marked the events
as Resolved.  
Several days later the events showed back in the ATA console as detected and the date range was up to the current date 2/3.  However if I export this data to Excel the last date displayed is 1/23.  I see a new user on the Exposed tab, but on the
Network Activities tab I do not the new date, only up to 1/23.  I have 10001 rows on the Network Activities tab.

More replies
Relevance 45.51%

A while back, I deleted the header and footer information by clicking on the little "sprocket" icon and then clearing headers and footers...so that I could printer a flyer with no internet information with the date and website. Well,... long story short, I am looking to put the header and footer information back and can't figure out how to do it. Does anyone have any suggestions as to how to get the web info and date etc. to print on the page like it used to?
 

Answer:PRINTING ??? header and footer information is missing

7 more replies
Relevance 45.51%

Hi, my HP Pavillion notepad has just applied the 1607 patch on Window 10 Home edition, and now every time I startup my notepad, it errors with 00A system board information missing.
How do I fix this? And how has an Windows patch overwritten this information?
Thank you.
Regards,
Sheryl.

Answer:System board 00A information missing - HP laptop

The HP Support site says - You need to have the missing information re-tattooed to the BIOS chip using a DMI Tool at an authorised HP service center.
Contact HP here - Contact HP | Workdwide
Regards,

2 more replies
Relevance 45.51%

I have a customer laptop HP 15-ac109na win 10 . This unit displays the product information missing error that seems Very Common and the lack of support for this issue is dreadful. I have tried ndbmifit across most board platforms none work HPSET  seems to run but shows 0x86 error and no information can be entered. Now this error is only displayed when charger is plugged in during bootup. On battery only this NEVER arises AT ALL! So it led me to believe voltages issue. I tested the charger voltage and its bordering +-5% tolerance and rated at 19.5v but outputting 20.01v. I think that when the charger is plugged in the DC in line component is failing possible MOSFET to the bios supplying too much voltage and protection mechanism kicks in resulting as bios corruption which in turn displays the error. On battery power this never happens ! So all components seem to be fine on the DC_batt line. Can anyone confirm my theory and or provide the HPB**.exe file for this unit board to allow the information to be tattooed to the board. This was a brand new purchase from high street retailer with a replaced system board!!!! Not good!

More replies
Relevance 45.51%

Just wandering why Lenovo/IBM do not provide description/documentation on the custom services they developed and configured for ThinkPads. For example "ThinkPad HDD APS Logging Service" - there is no description provided in Windows Services app.And even more confusing - Nothing returned by Search on Lenovo web site. All IBM products have always been well-documented! And I wish Lenovo to use this approach for ThinkPads!  any advise regarding "ThinkPad HDD APS Logging Service" -- highly appreciated!

More replies
Relevance 45.1%

Just got a new thinkpad with Win 8, upgraded to 8.1. When looking at the power options in the Lenovo Settings App it looks like a lot of functionality is missing compared to the old Power Manager days. Is there anyway to get the detailed battery health information. Design Wh, Max Wh, Current Wh, Current power usage in W etc. The ability to track the battery's max capacity over time help me decide when to replace it. The "good" condition indication Lenovo Settings gives me is not very useful. Am I missing some magic options somewhere to get into advanced mode? Or has this functionality been killed.

Answer:Win 8(.1) Lenovo Settings detailed battery information missing.

Power Manager as we knew it is gone from W8/8.1 and won't be returning from what I'm to understand...

3 more replies
Relevance 45.1%

After batery failure of my laptop when i start again then it says product information programmed into system board missing or invalid after power failure ..  How to solve this issue.

More replies
Relevance 45.1%

Hi All,

Am Running Windows XP home with SP2 on a P4 machine,
everything running smoothly except that I tried to uninstall a program
through the control panel-add/remove route and even though most programs are listed
there, only a few of them (like 5 out of 40 odd) have the change/remove
button when the particular program name is clicked. It just shows size,
used frequency and last used on... So, I cannot uninstall those
programs incl. the officeXP package. I am absolutely sure all this was
possible few days back and tried to get my system back to a 7-8 day
restore point but this does not help as well. In the registry key
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall"
only 5-6 programs are listed and the change/remove button only shows up
for these. Where did the rest go?..as all these other programs are
running on my computer. What could be the problem and how can I resolve
it without re-formatting. Any help would be greatly appreciated.

Thanks...
 

Answer:program uninstall information missing in the registry and add/remove

6 more replies
Relevance 45.1%

Hi

I have setup an email address to open up in Outlook 2010. My host provider has asked that I set it up so that emails can be deleted from server after x amount of days. Unfortunately, unlike on my other laptops, I cannot find this option. I have gone into Advanced Settings etc but it appears to be missing. (Please see print screen image.)

Does anyone know how I can access this information?

Answer:Outlook 2010 - Missing Delete From Server Information

Hello Natasha007, welcome to Seven Forums.

The reason is because you have set your account up as IMAP. The option you are looking for comes with a POP3 account, which is set up like this:
Microsoft Outlook 2010 Email Account Settings [Setup]

3 more replies
Relevance 45.1%

I have a HP  g62-339wm laptop replaced the bad motherboard i get a boot up error Product Information not valid hp site says conntact support   You might see this message after the system board is replaced. The message indicates that the serial number was not entered, or was entered incorrectly, after replacing the system board or other component.To resolve this issue,. You will be asked to provide the fourteen-digit System Board Commodity Tracking (CT) Number = .PX11T011Z0C0A2 i HOPE someone can help me I NEED THE CORRECT serial number

Answer:PRODUCT INFORMATION INVALID, serial number etc. is missing

Hi,You've to contact HP technical support in your region directly for tattooing BIOS of motherboard with information.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.htmlhttp://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlRegardsVisruth

1 more replies
Relevance 45.1%

I've got a windows 8 laptop which gives me this error message when i try to switch it on:
"Your PC needs to be repaired The boot configuration data file is missing some required information.
File:\BCD Error Code : 0xc000000d ............................" I'm sure you are all familiar with the rest of this dreaded error code.
I've tried all the repair options, recovery disks to a windows 8 bootable flash disk, the command prompt fix boot commands as well but still I get the same error message whenever i try to boot windows.
Now I'd like to know, can't i just copy the boot folders from another similar windows 8 pc and paste them into my harddrive to fix this??

Answer:BCD error boot file missing required information

Can you restore it to factory settings ?

8 more replies
Relevance 45.1%

Hi, anyone know if it is possible to enable the 'Stop error information screen'  in Windows 8.1? My computer crashed and I just got a just a short mesage with a ' '.
 
?

Answer:Missing 'Stop error information screen' Windows 8.1

You really don't want to do this, you may miss an important message which needs your attention.
 
Please do the following so we can get an idea of what is going on with this computer.
 

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

10 more replies
Relevance 45.1%

I recently used IOBit uninstaller to remove all traces of a program from the registry. I'm assuming it removed something that caused this issue, because after I used it all my program information in Add/Remove programs was missing. However, other users on my PC show all information in Add/Remove programs. Is there a way to repopulate this or would I have to create a new user? Thank you

Answer:Missing Program information/details in Add/Remove programs

Use a restore point before this happened.

5 more replies
Relevance 45.1%

When i start up the computer and run the internet explorer, a strange message popup box tells me that I inserted an invalid credit card number for my bank and I need to re enter my credit card number and pin number? Is this real?? It show my bank logo and it display my name and address too!

Answer:HELP? I get strange error that I am missing credit card information.

This is a spam!!!!
Do not enter anything.
Print what you can and contact your bank.

9 more replies
Relevance 45.1%

Alright, I have one of these:

http://www.wdc.com/en/products/Products.asp?DriveID=333

And I need to get a new enclosure to fix a recurring problem (on the recommendation of the people here). I'm looking on eBay and all of them require IDE 2.5" or SATA 2.5" and other things that aren't in the product specs. Can someone please spare a minute or two to link me to an eBay listing for an enclosure that would work with this?
 

Answer:Specs missing information?; need to buy new enclosure for external HD (newbie)

Not a lot of info on that link.
Probably need to take the drive out of the enclosure
and see what type it is.
An IDE drive will use a flat ribbon cable.
A sata will use a small thin connector.
 

2 more replies
Relevance 44.69%

My ideapad U310 doesn't boot any more after the boot procedure was interrupted by power outage.A blue screen shows the following:RecoveryYour PC needs to be repairedThe Boot Configuration Data file is missing some required information.File: \BCDError Code: 0xc000000dYou'll need to use the recovery Tools on your installation Media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.Press ESC for UEFI Firmware Settings

Answer:The Boot Configuration Data file is missing requires Information

I can only make one suggestion. Boot from usb Recovery flash drive and hope that the startup repair will do their magic to your unit.

1 more replies
Relevance 44.69%

I restarted my laptop today and then I get a blue screen with the following message
Your PC needs to be repaired
The boot configuration data file is missing some required information
file :\BCD
error code: 0xc0000034

you'll need to use the recovery tools on your installation media. if you don't have any installation media (like a disc or usb device), contact your system administrator or pc manufacturer.

press esc for uefi firmware settings
when i bought my laptop, windows 8 was already installed and i did not get any installation disc

how do i fix this problem?

Answer:boot configuration data file missing required information

Look over this procedure and see if you feel comfortable in using it.

How To Fix The Windows Bootloader ? TweakHound

I know you don't have a Win 8 disc at this point but I am more concerned with your level of comfort in executing the above.

1 more replies
Relevance 44.69%

My Windows Media Player 9 Music Library settings will not automatically update media information for files which were copied from CD's. These CD's were copied over several months but the missing media data i.e. '01 Track 1' is intact. I have done this successfully in the past with no issues.

I added the correct folder for monitoring with the following settings in Tools - Options - Media Library:
Update files by retrieving missing information from internet.
Only add missing information.
Find media information for music copied with another program.

I restarted the computer and started the browser before opening WMP9 and waited several hours for it to update with no changes appearing. I tried this with both Explorer and Firefox.

There is no menu item to force media information updates.

Is reinstalling WMP9 the best option at this point?
 

More replies
Relevance 44.69%

Well the best way to describe my problem is through a screen shot of it.



All start when I was trying to do a stream in Windows media Player. So when I went to the Network and Sharing center I couldn?t find a lot of info there, such as :
Basic network info, it show only - Unknown-
No - View your Active networks and connect or disconnect
No ? Access type info
No ? Home Group Info
No ? Connections info
Also full map is missing too.

Just below -Unknown- I have:

The service to detect this status is disabled.
More information?..

When I click on More information I have the following screen.





I click on -Turn this on- and nothing happens.

So, I need some help to fix this issue,
Tk?s in advance for any help
Carlos

Answer:Missing information in the Network and Sharing Center screen Windows 7

Forget to say, besides this problem all the system is working fine, except for streaming and sharing stuff.
Carlos

1 more replies
Relevance 44.69%

i'm getting problems with my broswer. the prompt says" please check your content advisor settings for missing information. when i do what it says it doesnt help i still cant use my internet-explorer browser.please help me fix soon i'm starting to have withdrawal symptoms.
 

Answer:{Resolved}Check Your Content Advisor Settings for Missing Information

<a href=http://support.microsoft.com/support/kb/articles/Q242/0/37.ASP?LN=EN-US&SD=gn&FR=0&qry=advisor&rnk=13&src=DHCS_MSPSS_gn_SRCH&SPR=IE> This</a> should help. Let us know what happens.
 

3 more replies
Relevance 44.69%

How does one get a New Audio CD added to the "fai.music.metaservices.microsoft.com" sever.  I have the New Audio CD for the "Original Motion Picture Soundtrack - Disney Moana" and the service has no matching Albums.  Disc
was released 18 Nov 2016 and I am using Windows Media Player 12.  Thanks!

More replies
Relevance 44.69%

My screen is black, error message comes up product info missing or invalid

Answer:Product information missing or invalid,system board 00A-prod...

Contact HP Sounds like you might need to get the motherboard re-tatooed or replaced




_________________________________________________________I am an HP employee."I'm looking for a laptop that looks like it's wrapped in super-rich, smoothed out tangerine peels." -TheMusicMaker

9 more replies
Relevance 44.69%

This morning I tried to boot up Windows Vista on my Satellite Pro, and I get the following displayed on the screen :-

----------------------------------
Windows Boot Manager
----------------------------------

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings and then click "next."
3. Click "repair youe computer."

If you do not have this disc, contact your system administrator or computer manufactuer for assistance.

File : \Boot\BCD

Status: 0xc000000d

Info: The Windows Boot Configuration Data file is missing required information

-----
ENTER=Continue ESC=exit
-----




I have found something similar on the Microsoft KnowledgeBase (http://support.microsoft.com/kb/927391) but as per the Windows Vista startup message, all of the suggested solutions require Vista installation media and I just have the basic Toshiba recovery CD.

When I try booting from my Toshiba Recovery CD, if I select "English (Windows Vista )" on the menu and go into settings, the only selectable option is a slider bar to select how big I want the partition to be - the option for "Expert Mode: Recovers WinRE and the OS to the drives of the ORIGINAL TOSHIBA installation without affecting an additional data drive" is greyed out.

All I can do with the Toshiba recovery CD ... Read more

Answer:Re: Visa fails to start - \boot\bcd missing required information

The Toshiba Recovery disk is not the same like the Microsoft Vista disk!!!
Recovery disk contains an image which will be not able to repair your computer.

The error message says that the boot manager is corrupt or it?s damage and you will need to boot from ORIGINAL Microsoft vista DVD in order to repair this.

If? you don?t have a such MS Vista DVD then I don?t see big chances to repair the OS.
So in such case you will have to reinstall the OS using the Recovery disk.

By the way; what happens if you press F8 immediately after notebook has been booted up?

2 more replies
Relevance 44.69%

I have a Lenovo idea pad P500. It is running windows 10. I am missing /BCD. The blue screen has an error code 0xc0000034. no idea what to do

More replies
Relevance 44.28%

I googled the problem and NOTHING!!!!! many information NO LONGER is displayed in my details pane in Windows Explorer!!!!!! song length is one of them gone missing (& total length if multiple files are selected) and I use that frequently!!!!! it ONLY shows basic information now such as artist, title, album, and genre!!! but total length is GONE!!! also MANY UNRELATED INFORMATION is now in the details pane for media files!!!!!!! mood of music has been added (never heard of that tag), song rating, and composer now have been added!!!! it even displays ALL THIS SAME INFORMATION for WAV files when it used to be ONLY file size and length for WAV files!!!!!!! WAV is NOT capable of tags so I don't know why Windows Explorer shows this information for WAV files!!!!!!
 
HOW DO I GET MY DETAILS PANE BACK TO NORMAL???????

Answer:missing information in details pane for media files (such as song length)

Can you post a screen shot of what you are seeing?

12 more replies
Relevance 44.28%

Hi All,
We've had MSFT Threat running over 30 days now.  2 virtual VMs, one running console the other gateway.  The gateway has a mirrored network port back to 1 of 2 virtual domain controllers.  I did a packet capture on the mirrored port and
traffic is coming through from the domain controller.  I see users, memberships and password info but I'm missing a lot of other stuff.  What could be causing this?  Thank you.

Some things I can't see are:
User Activity - No activity
Computers recently logged onto by this user - None
Recently accessed resources - None

More replies
Relevance 43.87%

Hello Thinkpad community,I am planning to buy a thinkpad x200s, x200, x300 or x301 to replace my z61m. Since I am missing some detailed technical information, it is hard for me to make this decision. Please help me to fill the gaps.X200/X200sMy favourite is the x200s, since the main requirement is ultra mobility. To make it usable also on the outside of buildings, I am interested how bright is the display1.) Candela / nit of X200s?2.) Candela / nit of X200?However, I want to use the notebook when I am at home as desktop system with a dual Monitor setup, too.3.) Does the x200 / x200s with extension bay support dual monitor setup (one via vga, one via digital output)?4.) If dual monitor setup is supported, what is the maximal supported resolution for two monitors?5.) Is dual monitor setup supported with linux?X300/X3001Just in case the display / resolution of the X200s is two small (I will have to check it in real in a lenovo partner store if it will be available in Germany) for me I will switch to X300 / X301.5.) Candela / nit of X300?6.) Candela / nit of X301?Dual Monitor support of X300 series?7.) AFAIK, X300 supports only dual monitor in combination with this usb-docking station with NO linux support (window drivers needed). Is that true?8.) AFIAK, the X3001 has dual display out on the notebook itself (vga and display port). Can thes ports be used in parallel fo dual monitor set up?9.) If dual monitor setup is supported with X301 is it working in combination with linux... Read more

Answer:Missing technical information on X200/X200s/X300 for final buying decision

welcome to the forum! here are a few links which may help your research.   the last link will give you specs on the various display panels among many other specs as well.  http://www.pc.ibm.com/us/thinkpad/tech_library.html http://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/x200_datasheet.pdfhttp://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/x300_USEN_00.pdf http://shop.lenovo.com/ISS_Static/merchandising/US/PDFs/X301_Datasheet.pdf  ftp://ftp.software.ibm.com/pc/pcinstitute/psref/tabook.pdf  64-bit OSes are supported on all X300/X301 and X200/X200s models.   server 2003 and 2008 are not officially supported but will run on the above equipment.   there's a chance that not all drivers can be found however, especially for 2003.   2008 is much easier to implement since it registers with most drivers and apps as simply being vista with SP1 (since vista shares 2008's kernel).

1 more replies
Relevance 43.87%

Hi, my HP Pavillion notepad has just applied the 1607 patch on Window 10 Home edition, and now every time I startup my notepad, it errors with 00A system board information missing. How do I fix this? And how has an Windows patch overwritten this information?
Thank you.
Regards,
Sheryl

More replies
Relevance 43.46%

If you receive the following error message when you try to boot your Windows 10 computer, then this post may help you: The Boot Configuration Date file is missing some required information.
File:\BCD
Error Code: 0zc000000d
If you receive this error screen, then boot your device to Advanced Startup Options and try the following: Run System Restore and see if it helps Run Startup Repair
You may have to rebuild BCD and repair MBR.
Open a Command Prompt and run the following commands one after the other: Code: bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd See these posts for more details: Restore, Fix, Repair Master Boot Record (MBR) in Windows Dual Boot Repair Tool: Repair BCD Boot Configuration Data
Restart your computer and see if it has helped.

Answer:Error Code 0zc000000d. Boot Configuration Date file is missing required information

Thanks for this HappyAndK! I was trying to install the RemixOS on my computer and received this message. I messed with the BCD configuration of the Windows. Thanks again, I restored it.

1 more replies
Relevance 40.59%

This laptop is a Dell Inspiron 15 (3521), it's operating system is Windows 8, it has no warranty, nor an installation media. I don't know how to repair it, or what caused this problem. I don't know if Dell would be able to help as it has no warranty. All I think I know about this problem is that Windows has to be installed again. And I'm not really good with computers.

Answer:"BCD file is missing some information Error code: 0xc0000034"

Hi ,
Thank you for reaching out to us.
Before we proceed with repairing the Windows 8 operating system, Lets confirm there no hardware issues in the laptop.
Could you please run a thorough diagnostics on the laptop by pressing F12 key for 3-5 times on the Dell logo which comes up during the startup, Select the option "Diagnostics" from the list. Follow the on screen instruction.
Should it come up with any error messages, please let us know what is the Error message and Validation code.
However if everything comes up okay, please send me your computer’s service tag via private message.
To send a private message, click on my name and click start conversation.

7 more replies
Relevance 40.59%

Hey, everyone!

Looking for some advice on getting my GB back, if possible.
I hope I'm posting in the right area.

The other day I had to do a System Restore on my Compaq (Windows XP) so far everything is working fine now. Though, I noticed my computer was running slower than usual. I checked my overall GB usage and found that it had dropped 20GB since the System Restore. My computer is currently 140GB in total and right now only 50% of it is left, making my computer run...not so quickly.

I used TreeSize and found that the missing 20GB was being used in "System Volume Information". I don't mean to sound like a newbie, but what exactly could be suddenly taking up 20GB of my space since the system restore? Is it possible for me to get it back without harming my computer? How do I go about doing that?

Someone mentioned that I should make sure it wasn't trojan/virus related, so I've run anti-virus, anti-malware, PC tuneups, etc. Everything is clean. Any advice?

Thanks so much!

EDIT: Okay well, after searching deeper into the "System Volume Information" I see that all the used GB is coming from a folder inside called "_restore{" and there must be 70+ different files inside, I'm guessing these are system restore points? Most of them are less than 1GB (though there are so many it apparently adds up) but one of them is a whopping 13.3GB by itself. What can I do about all these?

 

Answer:Help! Missing 20GB after System Restore, found in System Volume Information -- Why?

7 more replies
Relevance 40.18%

I am initiating a proxy server that acts as our webfilter.
On one of the machines I can't get the proxy's address to stay on either chrome or IE10.
Very strange. I can type in the ip and the port but the apply button remains greyed out and when I hit OK - it just doesn't take???
 

More replies
Relevance 39.77%

I am trying to edit information for my mp3's so they are all organized in iTunes, it will not let me do it.† iTunes doesn't let me edit the information either! Help!?

Answer:Windows 7 won't let me edit information... I.E. mp3 file information like artist,

Hi,You can right click the MP3 file and click Properties. Switch to "Detail" tab and then you can eidt the MP3 information, such as Title, Artists and†Composers. Can you modify the information successfully?If the information cannot be modified by iTunes, you may need contact Apple support for further assistance.Thanks,Novak

more replies
Relevance 39.77%

How to get MS security updates information in excel along with the Supersede information.
Earlier we use to get this information from https://www.microsoft.com/en-us/download/details.aspx?id=36982

However the Bulletinsearch list is updated till Apr 17, We need the info for future releases along with supersede as well.

More replies
Relevance 39.36%

Hello, I'm new here... need some assistance for my Windows... After I updated to Service Pack 1 from Windows Update (online update), I founded there's no OS name and OS version in System Properties like usual. Same with System Information.

Is there any solution for this? Thanks before...

tridentcore

-----------------------------
this is the first time I posted in sevenforums, after a year just became a reader of sevenforums. sorry if my English bad...

Answer:missing OS name in system properties and system information

Hello tridentcore and welcome to Seven Forums.

I noticed from your snips that System Information (snip # 2) does show under Version that SP1 was in fact installed. So at least part of your system is showing correct information. Have you completely shut down your system and rebooted since you did the SP1 update? (Not just a restart.) And your English is fine!

9 more replies
Relevance 39.36%

When trying to boot my HP Split x2 laptop I'm getting a BLUE SCREEN error "Recovery  Your PC needs to be repaired. The Boot Configuration Data file is missing some required information.  File: \BCD  Error Code: 0xc0000034.  I've tried everything that I can think of, but I can't get by this screen.  I have no CD/DVD drive in this model so I can't run any diagnostic tools, even if I had a tools CD/DVD. I'm stuck!  Please help!

Answer:File: \BCD file is missing some required information

1)  Press and hold the Power Button until the "haptic" feedback buzz is made. Immediately after the buzz, start tapping the "ESC" key until "ESC... Pausing Startup" is dispalyed in the lower left corner and/or the "Startup Menu" is displayed. 2a)  Press "F2" to start the "System Diagnostics" options. This may help in determining if there is a hardware issue with your computer. If there is a hardware issue, please contact HP. If there is no hardware issue, proceed to step "2b." 2b)  Repeat step "1" and press "F11" to start the "System Recovery" options. 3)  Choose your keyboard layout. 4)  Under "Choose an option", select "Troubleshoot." 5)  Under "Troubleshoot", select "Advanced options." 6)  Under "Advanced options", select "Automatic Repair." 7)  Choose your "target Operating System" to begin the automatic repair. 8)  If "Automatic Repair" doesn't fix the issue, under "Troubleshoot", you can try "Refresh your PC", "Reset your PC", and "Recovery Manager (System Recovery)"... in that order. 9)  If none of the above solves the problem, you may need to use the USB Recovery Media you previously created to recovery the computer. If you didn't create the required USB Recovery Media, you will need to order the recovery media from HP. Please contact official HP support in your region / country via the HP Worldwide Support Portal to see if HP Recovery Media is avail... Read more

9 more replies
Relevance 39.36%

Hello,Please i have a Hp probook 4320s laptop, at the start up he show system board 00A. missing product system information not valid.i have download Rufus and creat a bootable disk wirh hpbq138.exe file. but still i'm unable to fix it. please what should i do?

More replies
Relevance 39.36%

I first noticed the problem when I turned off the MSN add on. My banking page would load, but it did not contain the boxes to log in; they were missing from the page and background color appeared where they use to be. Other sites also acted the same way when you had to fill out fields of information. Likewise link buttons within web pages would do nothing.

I have searched the site and tried all the various methods I have found here. I performed the SCANNOW; RESET; Malware removal and disabled addons. I even upgraded to IE8 hoping that would resolve the problem. None of these methods worked. I even deleted java and reloaded the latest version.

I would appreciate any ideas or thoughts.

More replies
Relevance 39.36%

Not an HP employee; just a HP_Compaq laptop owner  I was having the following  error:The following product information programmed into the system board is missing or invalid.System Board (00A) -     Product Name                                            Product Configuration                                            Product Serial Number                                            Product Number I ran across this info and now it is fixed !!!! try this link for info on how to fixhttp://wintegrity.blogspot.com/2012/12/how-to-fix-product-information-not.html  The CD ISO file:https://drive.google.com/drive/folders/0B5ErypAfvfl9LTY5ZDJhcWEyMkk

More replies
Relevance 39.36%

hi friends

i wana ask you plz 2 give me information as soon as you can

i wana know what is it (Information Advantageís DecisionSuite Eureka) software

i wana know if you can evaluate the software from the following perspectives:

a. Decision making technique used/implemented

b. Features of the software and comparison with other software using the same/similar decision making technique.

c. Hardware and software resource requirements to make this software operational.

d. Training/Customer support/ other kinds of help available from the vendors.

e. General information about its popularity (mainly reasons for being successful or not so successful)

f. What are the limitations of this software??

g. Case Studies of the firms using this software (Specially look for the UAE based/Arab Countries Based Companies).

h. Cost-effectiveness or Cost-benefit analysis (take help from Case Studies) if possible.
i wana every each answer if you can

i will not forget this help ever

i hope that i can have the answer within this 2 days

put for me any thing you know

thanks again and again
 

Answer:information about (Information Advantage’s DecisionSuite Eureka)

7 more replies
Relevance 39.36%

"Cannot access the Windows Management Instrumentation Software. Windows management files may be moved or missing"

This is the error that i get when accessing system information built into the system tools.!!

Any solutions for the above problem??Thanks for any kind of help in advance....
 

Answer:Cant Collect Information: System Information problem

13 more replies
Relevance 39.36%

Hi

A site identifies its user through IP address and cookies. My question is about IP address. Does a IP address contain information information about your geographic region? What do those digits in IP address mean? Some websites could tell where the user is located, how? Would you please help me with it. Thanks a lot.
 

Answer:Does a IP address contain information information about your geographic region?

I think I have the answer. So, there is no need to reply and thanks for reading it.
 

1 more replies
Relevance 37.72%

the information is to be sent over an encrypted connection-what is that message called the one something like that on a new computer?it comes up in grey box when you type in a password or try to post on a forum

now im getting this again .. why?

maybe because firefox was updated

and on one computer some or all passwords to forums were deleted

was i hacked?

the information you have entered"is what it says -it just came up again
 

More replies
Relevance 34.03%

When I start System Information (msinfo32.msc) it gives me, in the info panel, the following message:
Can't collect information
Cannot access the Windows Management Information software. Windows Mangement files might be moved or missing.

I checked if the WMI service is not disabled (it is automatically started, the default).

In Microsoft Mangement Console, under Services and Application, I have WMI Control. R-click, properties, and:
Failed to connect to <local computer>
because "Interface: class not registered"

What can i do?
 

Answer:System Information "can't collect information"

16 more replies
Relevance 33.62%

I have a computer where the DHCP service will not start due to a missing dependent service.  I did some digging and found that the NetBT.sys file was missing, as well as the related Registry keys and the NetBIOS over TCP/IP service in Device Manager.
 I tried copying the NetBT.sys file over from a known good XP SP3 machine, but before I went any further, I wanted to make sure I wasn't missing anything.  Can someone offer some suggestions to fix this without having to reload XP?
 
Thanks,
Phil

Answer:NetBT.sys missing, registry entries missing, and NetBIOS over TCP/IP service missing from Device Manager

For what it is worth, I pulled the netbt.sys file from a known good machine and putting it into the %Windows%\system32\drivers folder, then imported the registry keys for NetBT from the same machine.  Rebooted the computer and the "NetBIOS over TCP
IP" driver showed up in Device manager under "Non Plug-and-Play Devices".  It showed that it was started, and verified that the DHCP client server was started as well.  Everything was in good working order at that point.  Here are the registry
keys:
 

Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
"Type"=dword:00000001
"Start"=dword:00000001
"ErrorControl"=dword:00000001
"Tag"=dword:00000005
"ImagePath"=hex
 
(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
 
 
52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e
 
,\
  00,73,00,79,00,73,00,00,00
"DisplayName"="NetBios over Tcpip"
"Group"="PNP_TDI"
"DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"DependOnGroup"=hex(7):00,00
"Description"="NetBios over Tcpip"
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
"OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"Bind"=hex
 
... Read more

7 more replies
Relevance 31.16%

I have been having problems with the Windows update.

I have run sfc /scannow on numerous occasions.

I have run the system readiness tool.

I have run the windows update stand alone tool

Nothing seems to work.

Any help would greatly be appreciated.

Also, I need feed back on recommendations of updating to Windows 10, or keeping Windows 7 64 Ultimate.

Find attached a copy of my check sur log.

This is just a partial image of the log, due to character limits in the post, so I have uploaded checksur.zip which is the full checksur log.

Thanks for everyone's help in advance.



Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.18489
2016-01-08 12:06

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Microsoft-Windows-IE-Hyphenation-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0.mum Expected file name Microsoft-Windows-IE-Hyphenation-Parent-Package-English~31bf3856ad364e35~neutral~~11.2.9412.0.mum does not match the actual file name
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Microsoft-Windows-IE-Spelling-Parent-Package-English~31bf3856ad364e35~~~11.2.9412.0.mum Expected file name Microsoft-Windows-IE-Spelling-Parent-Package-English~31bf3856ad364e35~neutral~~11.2.9412.0.mum does not match the actual file name

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) ... Read more

More replies
Relevance 31.16%

Due to technical issues in the forums and to recover some very important Malware FAQs, the forums had to be restored to a point in time from Sunday morning Sept 15th. Anything posted from that time on has been lost and will need to be reposted. We are very sorry about this, but it was critical to not loose all the important procedures stored in the Malware FAQs Forum.

For additional info on what may have been impacted, see the following thread in the Lounge: Missing Posts, Missing Messages, Missing Accounts

You can post your gripes and questions in this current thread or in the one in the Lounge. While the one in the Lounge is a sticky thread, it is open for posting questions and comments. (Note:No one can post in this thread in the Malware Forum!)
 

Answer:Missing Posts, Missing Messages, Missing Accounts

Additional note:

For anyone who posted anything yesterday, you may need to repost. You will have to check your threads to see what may be missing. Also anything we posted yesterday is gone too. We are in the process of going thru all threads that appear to be unanswered and working up procedures as necessary to answer the threads. In some cases, you may have already seen our posts or even received and email about them and you may have even added another reply. Since all of this communication from yesterday is lost (and we cannot recall everything we did yesterday), we just have to start at the oldest unanswered threads and work our way back to the current time.
 

1 more replies
Relevance 28.29%

I'm trying to set up a sort of retro gaming system, an old P2-233 I've underclocked to 166 so that those things with the overflow problem don't crash due to the processor being too fast. I was lucky enough to get an AWE64 (ISA) for it, which is a convenient card for such a time thanks to the fact that it more or less covers all bases but the UltraSound, and everything supporting UltraSound supported General Midi anyway (excluding MIDI players or whatever explicitely designed for the UltraSound.)

Thing is, it didn't have a driver disc with it. I remember it was a pain to get PROPER dos support out of the thing. I had to install Windows 95 drivers and then play around with the managers and such until things were exactly right as I recall. Unfortunately, I no longer have that disc. I made do with what I could, and I found a synthgm.sbk file which at least got AWEUTIL to work, but, the file was from DirectX, so when I later tried the so called "basic" disk I found a file that may or may not have been there before that appeared to be a different size, so I overwrote the old one with it. Thing is, some things, such as Descent 2, still don't work right with General Midi emulation enabled. That's fine in Descent's case since it supports AWE, but, what about the things that don't? When I start up Descent 2 with GM configured in the music, there's no music and it runs so insanely slow that it takes a good 10 minutes to completely ... Read more

More replies
Relevance 28.29%

I've been using a Ethernet cable to connect to my computer for a while since it gave me a faster connection then wifi, but I also use the Ethernet cable for other devices, after a while I swap them I still could connect to wifi on my computer after a month pass I swapped it and I notice that my wifi is not connecting I have check it and it was nothing but a empty list, I have searched the web for a solution for this problem, but none of the solution worked.
I can no longer get wifi and I have no idea how to fix it, I tried to update the network adaptor but nothing happened, after all this,
manually connect to a wireless network gone missing and as well as my Wifi Network adaptor, the only thing that showing in my network connection is "Ethernet Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)" and "LogMeIn Hamachi Virtual Ethernet Adapter #2" those are the only 2 things showing please help!
Also I had my computer for years and my computer had a built in Wifi adaptor or so.

Answer:Help Windows 10 manually connect to a wireless network missing and wifi adaptor missing

Hi welcome to Windows Central! Here's a link from MS that might help. If you need more help, please join the forum and start a thread! https://support.microsoft.com/en-us/...-get-connected Join the Windows Central Community!

1 more replies
Relevance 28.29%

Windows XP acting wonky. Text buttons missing, test in IE flashes or is missing, not a valid win32 application

Question:
Okay, this is a tough one I believe. Am fairly knowledgeable but there are always tricks and tips.

Have had same PC for quite a while. No hardware has been changed, no software has been added. Lojack is running on PC and has been for a while. Will ask vendor about this.
Windows XP Home, 3gb Ram, 2.4ghx Dual Core E6600 CPU with great cooling, paging file is system managed, also tried custom size, 3 partitions, single boot to XP, one user, 100gb free.
I have not changed my use or habits on this machine. I see no pattern.
Have all patches from MSFT

Problem: A few times a week while surfing in IE with a few windows open as always, I will get text on a web page that disappears. If I move my mouse it will appear. Closing down IE and restarting does not help issue. Using Firefox does not help issue. Closing all windows and restarting IE does not help.
If I then click on Word, Excel, Event Viewer, Task Manager or other program I will get an error: Not a valid Win32 application. Or I might get: Windows Installer Service could not be accessed. Or I will get: Insufficient System Resources exist to complete the requested service.
Very strange indeed.

If I reboot all is fine and worked again.
WHAT HAVE I DONE TO TRY TO RESOLVE ISSUE:
sfc/scannow
hijack this-clean
combofix-clean
vundofix-clean
Malwarebytes Antimalware,Superantispyware, Avira-Clean
Rootkit search-c... Read more

Answer:Windows XP acting wonky. Text buttons missing, test in IE flashes or is missing, not

13 more replies
Relevance 28.29%

Windows XP acting wonky. Text buttons missing, test in IE flashes or is missing, not a valid win32 application

Question:
Okay, this is a tough one I believe. Am fairly knowledgeable but there are always tricks and tips.

Have had same PC for quite a while. No hardware has been changed, no software has been added. Lojack is running on PC and has been for a while. Will ask vendor about this.
Windows XP Home, 3gb Ram, 2.4ghx Dual Core E6600 CPU with great cooling, paging file is system managed, also tried custom size, 3 partitions, single boot to XP, one user, 100gb free.
I have not changed my use or habits on this machine. I see no pattern.
Have all patches from MSFT

Problem: A few times a week while surfing in IE with a few windows open as always, I will get text on a web page that disappears. If I move my mouse it will appear. Closing down IE and restarting does not help issue. Using Firefox does not help issue. Closing all windows and restarting IE does not help.
If I then click on Word, Excel, Event Viewer, Task Manager or other program I will get an error: Not a valid Win32 application. Or I might get: Windows Installer Service could not be accessed. Or I will get: Insufficient System Resources exist to complete the requested service.
Very strange indeed.

If I reboot all is fine and worked again.


WHAT HAVE I DONE TO TRY TO RESOLVE ISSUE:
sfc/scannow
hijack this-clean
combofix-clean
vundofix-clean
Malwarebytes Antimalware,Superantispyware, Avir... Read more

Answer:Windows XP acting wonky. Text buttons missing, test in IE flashes or is missing, not

You could try uninstalling your video card drivers and reinstalling, download them from the manufacturers web site or have the CD handy.

I see that video card is a PCI-E (so I assume it's a plug-in card, not built into the mobo). You could remove it, clean the contacts and re-insert.

While you have it out, clean the fan.

5 more replies
Relevance 28.29%

My computer is acting very strangly lately: - Symantec Antivirus auto-protect turns itself off automatically once a day- The title bar of my different programs (IE8, Explorer, Outlook, Excel) disappears sometime- Start bar is really slow, and sometimes is missing areas- Outlook is working very slowely- Outlook sometimes tells me that my Archieve.pst is in use by another program (even though it is not)- Selecting START - Shut Down does nothing (I have to do a hard shut down with the power button)- Sometimes openning certain programs gives me a MISSING DLL error. But this is not always the case- Seems that the memory for clipboard is really small. Unlike in the past, it does not let me copy images that are of a reasonable sizeI am assuming I have some bad issues. This seems to happen when I am running Outlook and then afterwards, however, it also occurs other times as well. I have huge Outlook files (1 gb max) but that shouldnt cause the other missing DLL and not letting it shut down, I would assume.Any and all help would be greatly appreciated. ----------------DDS.txt ----------------DDS (Ver_09-12-01.01) - NTFSx86 Run by EMintz at 13:32:59.60 on Tue 02/02/2010Internet Explorer: 8.0.6001.18702Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1039 [GMT -8:00]AV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}============== Running Processes ===============C:\WINDOWS\System32\svc... Read more

Answer:strange acting computer: missing toolbar, shutdown not working, dll missing, etc

This has been fixed. Thanks

2 more replies
Relevance 28.29%

Having completed the step that was suggested i still have the power query tab missing and i recieve this dialog box error message, which i cannot make much sense of. I have pasted the entireity of the error message below.  What do I need to do to make the power query tab appear.ImageSee the end of this message for details on invokingjust-in-time (JIT) debugging instead of this dialog box. ************** Exception Text **************System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Office.Interop.Excel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.File name: 'Microsoft.Office.Interop.Excel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'   at Microsoft.Mashup.Client.Excel.AddIn.Try CreateApplication(Object appObject, IApplication& application)   at Microsoft.Mashup.Client.Excel.AddIn.Ext ensibility.IDTExtensibility2.OnConnecti on(Object application, ext_ConnectMode connectMode, Object addInInst, Array& custom) WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].   ************... Read more

Answer:Power Query Tab missing from Excel 2013 after download and a file within missing

Why are you posting this in the malware forum?

1 more replies
Relevance 28.29%

Having completed the step that was suggested i still have the power query tab missing and i recieve this dialog box error message, which i cannot make much sense of. I have pasted the entireity of the error message below.  What do I need to do to make the power query tab appear.ImageSee the end of this message for details on invokingjust-in-time (JIT) debugging instead of this dialog box. ************** Exception Text **************System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Office.Interop.Excel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.File name: 'Microsoft.Office.Interop.Excel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'   at Microsoft.Mashup.Client.Excel.AddIn.Try CreateApplication(Object appObject, IApplication& application)   at Microsoft.Mashup.Client.Excel.AddIn.Ext ensibility.IDTExtensibility2.OnConnecti on(Object application, ext_ConnectMode connectMode, Object addInInst, Array& custom) WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].   ************... Read more

Answer:Power Query Tab missing from Excel 2013 after download and a file within missing

Why are you posting this in the malware forum?

1 more replies
Relevance 28.29%

I have a laptop that, after removing fake System Recovery, still has browser redirects, missing icons, and missing start menu items. I have used unhide.exe to bring back the icons, but when expanding any item in the start menu the menu is blank. I have attempted to run ComboFix with no results. It appears that ComboFix never successfully installed as the laptop froze during the process. I have tried running tdsskiller for the rootkit but the program never loads, which makes me think it is being blocked. I apologize for not posting a DSS log, but it never successfully completed either. I was able to run GMER. Upon starting GMER, I received the following message. After hitting OK GMER was able to run.GMER 1.0.15.15641 - http://www.gmer.netRootkit scan 2011-11-01 12:44:08Windows 5.1.2600 Service Pack 3 Running: ix0whbwo[1].exe; Driver: C:\DOCUME~1\DAVIDA~1\LOCALS~1\Temp\fwddipow.sys---- Registry - GMER 1.0.15 ----Reg HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\[email protected] 60Reg HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\[email protected] 15Reg HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\[email protected] 10000Reg HKLM\SOFTWARE\Microsoft\Windows NT\Curr... Read more

Answer:System Recover, Browser Redirections, Missing Start Menu Items, Missing Icons

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/425878 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

2 more replies
Relevance 28.29%

Hey,

I'm having a bizarre problem with Vista Home 32 bit which suddenly appeared overnight. I put my notebook to sleep the day before, and when I powered it back on this morning, it was on the black & white boot up menu saying the notebook and crashed and had to restart.

I opted to boot windows normally but it kept restarting. Same problem with safe mode.

I tried to repair the installation with the installation disc but that didn't work.

Got to System Restore, tried to restore a previous point, but that failed.

I rebooted again, and miraculously it booted up to the desktop. But I've noticed a few major problems:

1. The program folder in the start menu is empty

2. The system tray has missing icons, most notably network connections

3. A few directories in C:\ are missing . Am sure I didn't delete them.

4. Many applications like MS Office or Adobe Acrobat are missing / have broken links and therefore do not work.

I have 2 user accounts on the notebook and both have similar problems.

When I boot up in Safe Mode, the program folder has a few applications listed, but the other problems remain.

System Restore doesn't work. It returns an error message saying a file's missing or something like that.

I feel something's corrupted but I don't even know how to begin searching for a solution to the problem since the symptoms are all over the place!

Would appreciate any help!

More replies
Relevance 28.29%

New laptop (Lenovo W510), but I swapped boot disk for an SSD and reinstalled Win 7 64bit from recovery disks. I moved My Documents to D: and when I open Windows Explorer all looks fine. When I click on an arrow beside My Documents (or Music or anything), the arrow selected disappears, folder disappears (sometimes), cursor spins (busy), and nothing appears in the right window. If I click on Documents, the right window shows the contents and I can navigate from there, but the folder window on left is useless. Sometimes the folders under Documents disappear all together. If I try real hard, I can render Explorer completely useless and have to reboot. Closing and opening Explorer does not solve problem.

Tried setting up a new user and problem occurred immediately - plus desktop icons appeared without icon images.

Tried SFC.exe to check system files - no problems found.

Any suggestions welcome.
Graham

Answer:Win Explorer arrows missing, cursor spinning, libraries missing

Try editing your settings under control panel. I'm not sure what the problem you're experiencing is because I've never experienced it. Can your system run a 64-bit operating system? Play around with control panel, editing settings, see if that solves the issue.

6 more replies
Relevance 28.29%

So my friend bought a non brand tablet from china with win vista on it. He turned it on and gave the error that a file is missing therefore it would not load the o.s.

I then though mayb I can pull out the hhd and plug it into my desktop and install winXp.

Well it ran well and it installed on the hhd and ran smooth. I shut off the comp and pulld out the hhd and placed it back in the tablet.

I turned on the tablet and it detected new hardware and askd if I should run it on safe mode, network, comand prompt, last good config or start off normally.

Well I try all amd nothing....

It would start but but then the xp icon would show with the loading bar and restart.

And back to the new hdwr detected screen....

What can I do??
 

Answer:Third party tablet wont start up. Missing OS file missing.

16 more replies
Relevance 28.29%

Hey all,

My hard drive died on my main rig, which could access everything fine, just before I went on vacation for a week roughly. When I came back, I used my notebook on my network via a wired connection instead of my desktop, and I noticed that many times, links would give a Page Cannot Be Displayed error, but if I hit refresh they would come up fine. Even on the same page, some images would be missing, or on hotmail.com, one or two of the frames wouldn't show up, or when I clicked to login it would get stuck on the forwarding page and say it couldn't be displayed. Now that I got my new desktop setup up and running, preparing for SLI, I noticed it too was doing the same thing.

I have a set internal IP address, the router I use is set for everything properly, and I am using the same settings as far as I remember on the new setup as I was with the old desktop. The internal IP is set for what it is on the router along with the desktop's MAC address, and the gateway/DNS is set on the desktop to use the router (192.168.0.1). Any ideas on what could be wrong?
 

Answer:Some pages load fine, others have parts missing/frames missing, etc.

I'd run CCleaner just to blow out temp internet files.

For DNS...I prefer entering the ISPs DNS servers, not using the router for the DNS server. Some routers do OK with that, others don't relay as well. So log into your routers web admin, hit the status tab..and jot down the 2x DNS servers you see on the WAN interface. Use those for your rigs DNS servers.
 

6 more replies
Relevance 28.29%

I logged into my computer this morning and the screen was blue, although I could still see my house and move it around. I can also do Ctrl Alt Delete to access the Task Manager when I don't see the explorer.exe. I know its supposed to be there but its not, I tried to manually start it by going to file new task and running it but it only runs for maybe 10 seconds? enough to see the icons on the desktop and the task bar, then they disappear. I searched online for a few answers but no real help. Im using another PC because I cant access the internet with my laptop that is have the problems. I was able to run hijackthis and put it on a thumb drive so I could post it here.

Any help would greatly be appreciated, thanks

I have ran ad aware and avast and both found something but didn't fix it.
I also posted this on http://www.techsupportforum.com. Thanks.
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:13:10 PM, on 5/16/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device... Read more

More replies