Computer Support Forum

Website not responsive on Edge

Question: Website not responsive on Edge

For some stupid reason my clients website does not load properly on Edge. This is their website: Waterproofing Oakville, Burlington, Hamilton, Grimsby St. Catharines. The banner image always gets cropped out. I don't see the issue in Chrome/Safari/Firefox.

Can someone help me with this?

More replies
Relevance 100%
Preferred Solution: Website not responsive on Edge

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 61.91%

When I click on the hub icon (favorites, reading list, etc.), I get no response. It's stuck on reading list. Clicking on favorites does nothing.

Pete

Answer:Edge Hub is not responsive

Does Edge totally freeze up then too(happened to me when viewing Downloads). The only thing that eventually helped was clearing everything(nuking the cache). I suppose it was a corruption.

4 more replies
Relevance 61.91%

When I click on the hub icon (favorites, reading list, etc.), I get no response. It's stuck on reading list. Clicking on favorites does nothing.

Pete

Answer:Edge Hub is not responsive

Does Edge totally freeze up then too(happened to me when viewing Downloads). The only thing that eventually helped was clearing everything(nuking the cache). I suppose it was a corruption.

0 more replies
Relevance 60.68%

Edge is unresponsive after the Creators Update (opens to blank page, Home button won't work and can't even type anything in address bar). Most hamburger menu items on right work except New Window and Zoom and extensions lost. All previous settings like Home page, Save Downloads location, etc are still there. Edge was working before the Update and most everything else in OS works flawlessly. I tried un-install but re-install failed so rolled back to 1607, Edge worked and reinstalled CU via ISO, same problem again.

I tried this Brink tutorial - Reinstall and Re-register Microsoft Edge in Windows 10 with no change. Tried changing DNS, sfc scannow found no corruptions. Most of the time, I can only close Edge via Task Manager kill. Any other suggestions ?

Answer:Edge non-responsive after Creators Update

FIXED !! Had to delete this hidden folder in Safe Mode first -
C:\Users\%username%\AppData\Local\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe by un-ticking Read Only, Apply and then deleting the entire folder. Reboot and THEN use Brink's tute to reinstall. Have set up Edge settings again but at least it works now.

8 more replies
Relevance 59.86%

Hi,

Im running windows 10 pro with the latest creators update.
I didnt have any problems but suddenly and it was before updating to the latest version of windows my edge is unresponsive after rebooting my system.

When I open edge after a reboot I can use the menus and scroll. When I load YouTube I can see the videos and scroll but cant open any of them I have to close edge and reopen it to fix the problem.

I made a reset, deleted edge and reinstalled, used ccleaner but the issue is not resolved.

Any help would be appreciated.

EDIT: Im not sure if it is related to my new gpu but I think the issue occurred after installing my msi 1080ti gpu but im not 100% sure....other than that no changes in my system.

Thanks!

More replies
Relevance 59.86%

This website is horrible to look at from any mobile device. It is time to "upgrade" and pay for it. not everything should be an app.

More replies
Relevance 52.89%

specs

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon™ 64 X2 Dual Core Processor 5600+, x86 Family 15 Model 67 Stepping 3
Processor Count: 2
RAM: 3454 Mb
Graphics Card: NVIDIA GeForce GT 430, 1 Mb
Hard Drives: C: Total - 305234 MB, Free - 112205 MB;
Motherboard: ECS, Nettle2
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Disabled

Hey everyone.

So my PC began acting up and I have a feeling it started when I was looking for video editing software and came across a video editor called "softonicdownloader_for_Windows-live-movie-maker.exe" I'm sure it's a virus or something because problems with my PC began shortly after getting this.
I deleted and uninstalled what I could, went into safe mode and ran the latest updated version of malware bytes. It got 5 infected files that were deleted.

After doing so, I had little success. Here are still the issues with the PC

#1 Desktop and start menu programs won't respond. Can be clicked and the arrow with hourglass will show up, but with no response. Sometimes clicking on them will freeze and lock up. Sometimes they will, but it is only after several manual shut downs. If it does respond (such as clicking on internet explorer), upon closing out the program it will not respond again without a manual shut down.

#2 Boot up is a lot slower, will stay on "Loading your personal setting... Read more

Answer:Slow start ups, shut downs or non responsive. Programs will freeze up or become non responsive

Greetings and Welcome to The Forums!!My name is Gringo and I'll be glad to help you with your computer problems.I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the ... Read more

4 more replies
Relevance 52.89%

xp home edition, avg free download,firefox default browser... scanned with secunia p.s.i. for latest pathches/upgrades. windows firewall with avg used for security.
Problem 1) left click slow to respond or non resposive .i must double click by tapping touch pad. right click seems to work ok.
2)wmp will not open when dvd disc inserted into player or wmp opens with half the screen NOT displayed and still unresponsive. (WMP WILL WORK when i play video from my downloads)
3)firfox(default browser) AND IE browser somtimes become unresposive and crash. OR are very slow to download a website.
4) when i "X" out of a window the screen will some or most times close slow..screen will close from top to bottom slow like a curtain closing!
i updated and scanned with avg anti-virus( free download version). problem remains. Please help tech titans!!!!!
 

More replies
Relevance 49.61%

Microsoft Edge is blocking my websites.
What should i do with it, how should i report it wrong.

Answer:Why is my edge blocking my website?

[Links Removed]
The moderator is removing my links... If links are removed then how am i supposed to get help?

1 more replies
Relevance 49.61%

I have a website, I am trying to get to work in edge. I made a website, and it is hosted on my internal server via apache running on Mandriva Linux 2010.1, on virtual box, on Windows 10 (which is the physical machine's OS).

I tested this website in Internet Explorer, by going to the main page, opening it in Internet Explorer, and then clicking the hyperlink to go there. It works from there. I tested in firefox and chrome, and it works there too. But it won't work from edge.

I found out the reason: edge is coded to make the page redirect from http to https, and I don't want it to run over https, and it is not set up to run over https. What trick either in my webserver or in edge's configuration can I use to get around this? Or if that's not possible could you tell me how to get the same content working over https, without having to deal with certificates or anything, and no warnings about certificate errors? https is not really needed for this website, because it's just a list of hyperlinks to other pages.
 

More replies
Relevance 49.61%

This site just does not work on Edge for me. I'll be typing in the middle of a sentence and all of a sudden my cursor will revert to the left end of the text box and type backwards. Try and fix it? TOO BAD the tab crashes and has to recover.
IM CRYING OG MI NIAGA SEOG TI EREHT DOG YM HOhouoThen you have to type y?

Answer:Does anyone else have trouble with this website on Edge?

Yes, yes I do. Annoying.

5 more replies
Relevance 48.79%

Hi.  Brand new computer, 4 days old.  Still loading it up with stuff from my old laptop.  Removed Norton with the removal tool and installed Eset Smart Security.  Very little else installed yet.
 
 
I need to go to the Australian retailer Coles reasonably often.  Chrome is my preferred browser.  When I try to get to the website I get:-
 
www.coles.com.au unexpectedly closed the connection.

Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics

 
 
Connection is fine, can get anything else I want.  Firewall is not on as I'm running Eset.  Diagnostics is as useless as ever and says it can't determine the problem as usual.
 
HOWEVER, if I use the Microsoft Edge browser, no problem - straight to Coles.
Anyone hazard a guess as to why this is the case?
thanks
Hoges

More replies
Relevance 48.79%

Hi!
I am facing a weird issue with the YouTube website on the Edge browser. When I bought the laptop a month ago, it was working fine until two days back. My McAfee AV trial, which was bundled with the laptop, ran out and I uninstalled it. Since then only the YouTube website is looking all scrambled up. Please take a look at the attached screenshot;
What could be the issue? Any solutions for this? Ironically, the YouTube site is working fine in Internet Explorer. Please help!

More replies
Relevance 48.79%

My problem is I find MS Edge does not always react the same to sites that appear to have website certificate error problems.

The following two url's are basically for the same site, due to a change in the name of the government department at some or other stage.

Daily State of Dams

Daily State of Dams


Both sites offer a facility where one can display data accessed from a database in a map form. One can display the latest data for the most recent date in the data base which always works. But on the one site (the official new site), DWS Landing Page), choosing a previous date to the latest on will just display a place holder instead of the map,



yet on the older site, it will display a website certificate error message, which then allows one to proceed anyway and then get the map.



Can anyone offer an explanation why this is please? Iin other words why does MS edge not routinely display the error message instead of a place holder?

Further, using another browser such as Chrome will offer one an option to display the image in a separate window which then allows one to see the image. This facility is not available in MS Edge consistently. Any reason why not?

More replies
Relevance 48.79%

My problem is I find MS Edge does not always react the same to sites that have appear to have website certificate error problems.

The following two url's are basically for the same site, due to a change in the name of the government department at some or other stage.

Daily State of Dams

Daily State of Dams


Both sites offer a facility where one can display data accessed from a database in a map form. One can display the latest data for the most recent date in the data base which always works. But on the one site (the official new site DWS Landing Page), choosing a previous date to the latest on will just display a place holder instead of the map,



yet on the older site, it will display a website certificate error message, which then allows one to proceed anyway and then get the map.



Can anyone offer an explanation why this is please? in other words why does MS edge not routinely display the error message instead of a place holder?

Further, using another browser such as Chrome will offer one an option to display the image in a separate window which then allows one to see the image. This facility is not available in MS Edge. Any reason why not?

More replies
Relevance 48.79%

Hi.  Brand new computer, 4 days old.  Still loading it up with stuff from my old laptop.  Removed Norton with the removal tool and installed Eset Smart Security.  Very little else installed yet.
 
 
I need to go to the Australian retailer Coles reasonably often.  Chrome is my preferred browser.  When I try to get to the website I get:-
 
www.coles.com.au unexpectedly closed the connection.

Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics

 
 
Connection is fine, can get anything else I want.  Firewall is not on as I'm running Eset.  Diagnostics is as useless as ever and says it can't determine the problem as usual.
 
HOWEVER, if I use the Microsoft Edge browser, no problem - straight to Coles.
Anyone hazard a guess as to why this is the case?
thanks
Hoges

More replies
Relevance 48.79%

I think it because I am from Israel.

Answer:Unable to access website using MS Edge

Originally Posted by PaPaPaPanda I think it because I am from Israel. so you're unable to access that specific website or all sites from edge browser?

9 more replies
Relevance 48.79%

Hello All,
Since yesterday I have been issues with Edge, where this happens every 5 minutes where it hangs then auto refreshes than shows the error below (on the left) either that or the page fails to load completely after appearing to load.
On the left Edge, on the right Firefox (which is still a memory hog ).
Any one else having the same issues?
The only thing that changed was I had to reinstall HP's AMD W8 drivers under compatibility mode; furthermore installing the latest WU updates did not resolve this issue.

Answer:Edge - website loading issues

Exactly !! I also have same issues for Edge and really irritated due to these issues.

10 more replies
Relevance 48.38%

Just recently Edge has been giving me an error message stating "There is a problem with this site's security certificate" when I try to log onto my work site remotely. I know the site well, have spoken to their IT department and have been assured the certificate is up to date. I have verified my computer has the correct date and time. I have tried accessing the site with MS IE with the same results. There is an option to ignore the warning and proceed anyway, but nothing happens when I click it. Fire Fox allows me to get to the website and log in, but then it seems Citrix will not allow me to access the content. I had previously been able to access the site and its content with Edge. I am not aware that anything has changed on my computer and the IT department for the site I am trying to access notes that they are not having any problem with remote access when they personally log on, and have not received any other calls about problems. They note multiple users are currently logged on. They insist the problem is in my computer. Any ideas on how to fix this?

I am currently running W10 Pro version 1511 on a Dell machine with Intel Core i7 920 @2.67GHz and 8.00 GB RAM. 64 bit system. I use both Fire Fox and MS Edge as browsers both of which are up to date.
Augi1

More replies
Relevance 48.38%

I ran the recent update for Windows 10 and since then when I click on Edge and do a search it comes up with a list of websites ok. However when I click on one of the links to open it I get "Hmm, we can't reach this page. Try this: make sure you have right address or refresh page." All links were working fine before I ran the update. I have exactly the same problem with my daughter's laptop. All searches work fine on anything not using Windows 10. Any ideas??

More replies
Relevance 48.38%

Hello everyone,

First post here and thanks for allowing me to be a part of the community!

My first question is while attempting to pin a website to the task bar in Edge I followed the directions and selected the "3 dots menu" and then selected "open with IE" option as instructed.

When I click on the webpage icon in the task bar the site indeed comes up but it is in Internet Explorer rather than Edge. Is there any way I can pin the site to the task bar and have it launch in Edge rather than IE? I understand it opens in IE because I opened the website in Edge and then told it to open with IE.

When I tried pinning the tab to the task bar in Edge I got the universal red circle with the line through it so I couldn't pin it unless I opened it in IE.

Ive noticed when I pin a website to the Start Menu that it will open in Edge. Is it not possible to have this happen by using the task bar?

Thanks so much for your help.

Appreciate interacting with you folks very much.

best,

rick

More replies
Relevance 48.38%

Just recently Edge has been giving me an error message stating "There is a problem with this site's security certificate" when I try to log onto my work site remotely. I know the site well, have spoken to their IT department and have been assured the certificate is up to date. I have verified my computer has the correct date and time. I have tried accessing the site with MS IE with the same results. There is an option to ignore the warning and proceed anyway, but nothing happens when I click it. Fire Fox allows me to get to the website and log in, but then it seems Citrix will not allow me to access the content. I had previously been able to access the site and its content with Edge. I am not aware that anything has changed on my computer and the IT department for the site I am trying to access notes that they are not having any problem with remote access when they personally log on, and have not received any other calls about problems. They note multiple users are currently logged on. They insist the problem is in my computer. Any ideas on how to fix this?

I am currently running W10 Pro version 1511 on a Dell machine with Intel Core i7 920 @2.67GHz and 8.00 GB RAM. 64 bit system. I use both Fire Fox and MS Edge as browsers both of which are up to date.
Augi1

More replies
Relevance 48.38%

When using any version of IE Explorer, when viewing a webpage and want to create a desktop shortcut to that webpage I would simply right click just about anywhere on the webpage and select Create Desktop Shortcut from the drop-down Menu and Presto a new icon shortcut would appear on the desktop.

However, when using MS- Edge, when I Right Click on any webpage all I get is a small drop down-down menu with no selection to create a Desktop Shortcut. Please don't tell me that MS has removed this feature in Edge and I am just missing something or there is a flaw in my system. I have tried every which way to create a Desktop Shortcut of something I am viewing when using Edge to no avail.

Answer:Creating Desktop Shortcut To Website When Using MS Edge

I'm with you on this one!
So far the only way I have found is to add the page to a reading list by clicking the Star at top right, selecting Reading List and then Add.
It's not ideal but it's better than nothing.

Another roundabout way is:
While viewing your wepage in Edge,

Click the three dots at top right
Choose Open with Internet Explorer

Now you can create your shortcut as you were used to. The shortcut will open in Edge if that's your default browser.

4 more replies
Relevance 47.97%

The Microsoft Edage has changed Internet Explorer to open multiple website. I am unable to right click the Edge to open another website but keep the current one. Can you tell how to open the multiple website in the Microsoft Edge? Thank you.

Answer:How to open multiple website in Window 10 Microsoft Edge?

Just open a new tab in Edge.

10 more replies
Relevance 47.97%

I can't see any listing of Edge or Windows 10 in the Browser/Operating System reports in Google Analytics-- for my personal website or my job's website.
Is this a MS issue or Google issue? Maybe both?
Thanks!

Answer:Has anyone found Windows 10 or Edge in their website's Google Analytics?

Analytics lists it as a Chrome browser so in a few days 90% of the world will have switched to Chrome and IE will have 0 market share.

2 more replies
Relevance 47.97%

I put about ten shortcuts onto my desktop, such as ones for eBay, Google, Amazon, etc.; however, they all have Edge's standard blue icons. This makes the whole group appear as a monolithic bunch of icons that all look the same and not so easy to read. Is there a way to change these desktop icons to the various websites' favicons, making them easier to see/read/use?

I think that you can right-click a shortcut, then choose "Properties," then click on "Change Icon." However, from there, I'm stuck, because it offers me the option of browsing to the icon I want, but I don't know how to get to any favicon that I might want.

It's easy to find those websites' favicons, using Google images, and I can then save them onto my desktop, but I don't know how to get them from there onto their relevant shortcuts. I think there is a cache, called something like "shell32.icon" or whatever, which holds icons, but I'm not sure if that's anything I want to mess with, because I'm fully aware that messing with those kinds of files can lead to disastrous results, such as the computer freezing up, the 'blue screen of death,' etc.

Any help would be greatly appreciated.

Answer:Can you change the shortcut icons from Edge's to website favicons?

Originally Posted by Rayzen


I put about ten shortcuts onto my desktop, such as ones for eBay, Google, Amazon, etc.; however, they all have Edge's standard blue icons. This makes the whole group appear as a monolithic bunch of icons that all look the same and not so easy to read. Is there a way to change these desktop icons to the various websites' favicons, making them easier to see/read/use?

I think that you can right-click a shortcut, then choose "Properties," then click on "Change Icon." However, from there, I'm stuck, because it offers me the option of browsing to the icon I want, but I don't know how to get to any favicon that I might want.

It's easy to find those websites' favicons, using Google images, and I can then save them onto my desktop, but I don't know how to get them from there onto their relevant shortcuts. I think there is a cache, called something like "shell32.icon" or whatever, which holds icons, but I'm not sure if that's anything I want to mess with, because I'm fully aware that messing with those kinds of files can lead to disastrous results, such as the computer freezing up, the 'blue screen of death,' etc.

Any help would be greatly appreciated.



The problem with creating URL shortcuts is the favicon.ico is stored on a Web site, not on the computer like the shortcuts in the Start menu. And Win10 doesn't show Properties on the right-click of icons like we're familiar with on Win7 and e... Read more

1 more replies
Relevance 47.97%

I put about ten shortcuts onto my desktop, such as ones for eBay, Google, Amazon, etc.; however, they all have Edge's standard blue icons. This makes the whole group appear as a monolithic bunch of icons that all look the same and not so easy to read. Is there a way to change these desktop icons to the various websites' favicons, making them easier to see/read/use?

I think that you can right-click a shortcut, then choose "Properties," then click on "Change Icon." However, from there, I'm stuck, because it offers me the option of browsing to the icon I want, but I don't know how to get to any favicon that I might want.

It's easy to find those websites' favicons, using Google images, and I can then save them onto my desktop, but I don't know how to get them from there onto their relevant shortcuts. I think there is a cache, called something like "shell32.icon" or whatever, which holds icons, but I'm not sure if that's anything I want to mess with, because I'm fully aware that messing with those kinds of files can lead to disastrous results, such as the computer freezing up, the 'blue screen of death,' etc.

Any help would be greatly appreciated.

Answer:Can you change the shortcut icons from Edge's to website favicons?

Rayzen said:

I put about ten shortcuts onto my desktop, such as ones for eBay, Google, Amazon, etc.; however, they all have Edge's standard blue icons. This makes the whole group appear as a monolithic bunch of icons that all look the same and not so easy to read. Is there a way to change these desktop icons to the various websites' favicons, making them easier to see/read/use?

I think that you can right-click a shortcut, then choose "Properties," then click on "Change Icon." However, from there, I'm stuck, because it offers me the option of browsing to the icon I want, but I don't know how to get to any favicon that I might want.

It's easy to find those websites' favicons, using Google images, and I can then save them onto my desktop, but I don't know how to get them from there onto their relevant shortcuts. I think there is a cache, called something like "shell32.icon" or whatever, which holds icons, but I'm not sure if that's anything I want to mess with, because I'm fully aware that messing with those kinds of files can lead to disastrous results, such as the computer freezing up, the 'blue screen of death,' etc.

Any help would be greatly appreciated.



The problem with creating URL shortcuts is the favicon.ico is stored on a Web site, not on the computer like the shortcuts in the Start menu. And Win10 doesn't show Properties on the right-click of icons like we're familiar with on Win7 and earlier. Haven't look... Read more

6 more replies
Relevance 47.97%

A friend with a Lenovo i7 P50 Thinkpad with Win 10 factory installed. Creators Update installed via Windows Update a few weeks ago. Called me last week reporting that he could no longer view web pages using Edge, Chrome, Firefox, or IE. I checked event viewer and saw one of his music creation programs was using a proxy server that was failing. I uninstalled the program and he was able to access web sites for a week, then yesterday the problem came back but no related errors in event viewer. Opening up a CMND window I could ping and tracert any web site without problems. His e-mail works. team viewer works. The web browsers will not connect, hang sometimes, and when closed and exited can still be seen running under task manager or process explorer. I get an error message saying the program can not be terminated when I try to kill it with process explorer or task manager. I ran a half dozen or more antivirus / malware programs which only come up with PUP's and one or two malware not related to this problem. NO proxy settings seen in the browser / internet settings. Running ipconfig /flushdns /release /renew doesn't help either. Suggestions appreciated. - Steve

Answer:Edge, Chrome, Firefox, and IE all fail to connect to any website

Just a wild guess, is that computer by chance using any kind of proxy service or HideMyID service provided by an installed AV or Internet Service package by any number of free or pay-for products?

0 more replies
Relevance 47.97%

How to save and view the website in the Favorites inMicrosoft Edge?

Answer:How to save and view the website in the Favorites in Microsoft Edge?

Hello Compiler,

The tutorials below can help show you how to add and view Favorites in Microsoft Edge.

https://www.tenforums.com/tutorials/5...dows-10-a.html

https://www.tenforums.com/tutorials/1...dows-10-a.html

1 more replies
Relevance 47.97%

you can test with website you don't care about like aol.com

shake pin erratically eventually it flys off screen, you can't repin shortcut no matter what, resetting Edge does not fix

ie metro in Win8 has unpin function unavailable in Edge browser

is this just a bug, it happens with start screen fullscreen enabled, i have done this multiple times

More replies
Relevance 47.97%

From a web development point of view can some tell me why the website extrainnings.us will not scroll using touch, up and down, when using Edge Browser on a Surface 3? The site works just fine on chrome and Friefox

More replies
Relevance 47.15%

Guys im making this website and i cant reach it with Edge
Everythings fine with Chrome Opera or Firefox, why??
Please help me i gotta ultimate the website in a week!!!

Answer:Can't reach a specific website I'm making with Edge, ok with Chrome and Firefox

What happens when you try to open the site in Edge? Does it not load at all?

1 more replies
Relevance 47.15%

each time I try to access the sites my computers says the certificates provided cannot be trusted it causes my browser to either freeze or it boots me completely off the internet , I tried internet explorer and google chrome as well and I keep getting the same results

Answer:how can i get ako attrs jko alms or any government website to work on microsoft edge

The certificates on those sites were issued by an old expired CA.
Looks like a bad configuration by whatever gov agency runs them...
Stuff like that normally gets fixed in a day or so without you doing anything.

2 more replies
Relevance 46.74%

The asp.net website is configured to use Integrated Windows Authentication and hosted locally on IIS\localhost.
When I try to access this website the windows authentication pop-up appears.
Moreover no chance to remember my credentials. If I restart Edge and open this website than authentication form appears
again.
At IE and Chrome the user is automatically authenticated without any windows authentication form, no issue. 

In addition to that I played with "Internet Options\Local Intranet" and "Internet Options\Trusted sites"
and "Logon options" ("Automatically logon only on Intranet zone", "Automatically logon with current user name and password". Nothing helped.

Any ideas how to suppress this annoying authentication dialog?

More replies
Relevance 45.51%

which one would be better for fps gaming (more specifically cs:s)

since they give you the option of changing the responsiveness, i'm guessing this doesn't matter? or does it?

i have a A4 tech mouse that's more very sensitive, while a logitech optical mouse (i think nubius has it, he recommended it to me when i asked for a mouse) that's less sensitive

which would be better (or it doesn't matter?)

Answer:Mouse- More responsive vs less responsive

More sensitive.

4 more replies
Relevance 37.31%

/* This code works on all other browsers and loads the 800 + fonts, in Edge does not load anything, but if I limit the load to 300 fonts in the loop these are loaded, any idea? Is my fault? */

var familiesArray = [];
$.each( lorem_ipsum.items, function(index, val){ //load google fonts asynchronously
familiesArray.push(val.family);
//if (index < 300) familiesArray.push(val.family);
//if (index > 550) familiesArray.push(val.family);
//if (index > 100) return false;
});

/* lorem_ipsum.items.forEach(function(val, index){
familiesArray.push(val.family);
});
*/
/* for ( var i = 0, len = lorem_ipsum.items.length; i < len; i++){
familiesArray.push(lorem_ipsum.items[i].family);
}
*/
WebFontConfig = {
google: {
families: familiesArray
},
};
(function(d) {
var wf = d.createElement('script'), s = d.scripts[0];
wf.src = 'https://ajax.googleapis.com/ajax/libs/webfont/1.6.26/webfont.js';
wf.type = 'text/ja... Read more

More replies
Relevance 37.31%

Hello to all, This is my first post.
Today I found out that Google had limited its search service on Edge by MicrosoftInsider.es, and this happens
This is a great hoax, and also seems to make it or for two reasons:
1. Attempt of Stop of growth of Microsoft Edge
or 2. Google Revenge
What is the solution? This:
Press F12 (if you are on a laptop press Fn + F12), This open the F12 Tools
After go to Emulation, in Browser select or Google Chrome or Mozilla Firefox, and Solutionated.
Well, I hope to see their opinions and also see that users of Google in Edge make.
Kind Regards :)
PD: i use Bing

Answer:Google limits the search service in Microsoft Edge ┐this is a hazard for the grow of Edge?

I'm not exactly sure about what you're saying.. Afaik Google hasn't implemented any limits for Edge users. Do you have proof of this? The picture you have added does not proof that Google has implemented a limited number of searches for Edge users

1 more replies
Relevance 37.31%

Hello to all, This is my first post.
Today I found out that Google had limited its search service on Edge by MicrosoftInsider.es, and this happens
This is a great hoax, and also seems to make it or for two reasons:
1. Attempt of Stop of growth of Microsoft Edge
or 2. Google Revenge
What is the solution? This:
Press F12 (if you are on a laptop press Fn + F12), This open the F12 Tools
After go to Emulation, in Browser select or Google Chrome or Mozilla Firefox, and Solutionated.
Well, I hope to see their opinions and also see that users of Google in Edge make.
Kind Regards :)
PD: i use Bing

Answer:Google limits the search service in Microsoft Edge ┐this is a hazard for the grow of Edge?

I'm not exactly sure about what you're saying.. Afaik Google hasn't implemented any limits for Edge users. Do you have proof of this? The picture you have added does not proof that Google has implemented a limited number of searches for Edge users

2 more replies
Relevance 37.31%

Microsoft Edge does not have any control buttons, from the opening page you have to search to get to any website.
Does anyone know how to get these to work in edge? As of right now it is a useless program and a huge step backwards from IE11.

Answer:Edge has no back, forward, home, url, favorites, or settings. How can I get all of these to work in Edge?

if you are talking about the mobile version i have to say it haves all of the above exept the forward button

3 more replies
Relevance 37.31%

I've been having this problem since I upgraded to the creator's update. Sometimes everything works perfectly, but most of the time I have these issues:

Edge won't connect to internet or load anythingI can't close tabs in EdgeThe "Close all tabs" option in edge doesn't work, only closes 1 tabI can only get Edge to close using Task ManagerWindows Store apps like Twitter and Netflix won't connect and also sometimes won't closeI can't check for Windows updates through settings (won't connect again)

The internet works on third party apps that weren't downloaded in the Windows Store, like Chrome, Firefox, Opera, and Spotify. Does anyone have any idea what could be causing this or how I could fix it? Thanks so much!

Answer:Internet Not Working in Edge & Windows Store Apps, Edge Won't Close

Hi ineedhelppls. Welcome to the TenForums @ineedhelppls

First thing I would do is run these commands at command prompt(admin). In the following commands do not key in the information in brackets, it is there to tell you what command does.

ipconfig /flushdns (Clear the dns cache)
nbtstat -RR (release and refesh NetBIOS names)
netsh int ip reset (reset ip settings)
netsh winsock reset (Reset Winsock Catalog)

Test.

Then I would disable IPv6. You will notice it can be enabled just as easy.

https://support.microsoft.com/en-gb/...nts-in-windows

If you still get issues I would recommend a network reset. You will lose wireless passwords.

Start=>Settings=>Network and Internet=> scroll down to bottom on the right hand side, last option, Network Reset.
Ken

0 more replies
Relevance 37.31%

hi folks, i am trying to decide between an edge e520 and an edge 15, i5, 15.6" screen. main use is for music production (cubase) but also some tv and movie watching. both the ones i am looking at have the anti-glare screen. - has anyone here got any experience of either model with music production? - is it exactly the same display on both models or is one better than the other (for movies etc)? i've read a few negative reports about the display quality.  thanks!    

More replies
Relevance 37.31%

I ve bought thinkpade edge 13 (0221RY6) and formated my hdd (was trying to install win XP). But now i am ready to switch on Windows seven and i am very sorry that i ve formated my HDD with pre installed windows 7.Somebody who has same machine PLS Can u give me your copy of recovery usb or link on it! Or any other help.THANKS!

Answer:I have lost my Recovery HDD with pre installed windows 7 on ThinkPad Edge 13 edge PLS Need HElp!

This is why one should burn recovery media before fiddling with the HD.
 
One option would be to download a legal Windows 7 ISO and install it.  Or borrow one.  You can use the product key on the bottom of your machine (or in the battery compartment) to activate the installation.  You may have to use the phone option to activate.
 
Working Legal Windows 7 Download Links 
 
To do this you must install the same version of Windows that came on your machine - but it can be either 32 or 64 bit.
 
Your machine came with Win7 Home Basic 32.  I can't say for certain that these "all version" ISOs include that version, but you can try and see.
 
Once you have Windows installed, go to the Lenovo support page and enter your machine type.  That will take you to a list of drivers and apps to download.  Expand the ThinkVantage option and install ThinkVantage System Update.  You can then run it and it will download and install the other software automatically.
 
I'm basing this on what I see on the US pages.  Yours may be different.
 
Good luck,
Z.

2 more replies
Relevance 37.31%

Since installing the November Windows 10 update (11/17/15) none of my favorites are being stored in the default Edge folder. While in Edge the favorites are available but when I go to the default folder they are not listed. Is there another location they may be being saved or has my default location somehow been changed? My AppData folder shows a creation date of 11/17/15 with no modifications being made in favorites since that date.

Answer:Microsoft Edge Favorites not in default folder but availalbe in Edge

Hello mongands, and welcome to Ten Forums.

Microsoft Edge Favorites - Backup and Restore in Windows 10 - Windows 10 Forums

Microsoft Edge Favorites - Add or Remove in Windows 10 - Windows 10 Forums


   Note
Starting in in Windows 10 Insider Preview build 10565 and Windows 10 TH2 version 10511 build 10568, your favorites and favorites bar in Microsoft Edge are now stored in an ESE database file in the DataStore folder at the location below.


Code:
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\AC\MicrosoftEdge\User\Default\DataStore

0 more replies
Relevance 37.31%

Since installing the November Windows 10 update (11/17/15) none of my favorites are being stored in the default Edge folder. While in Edge the favorites are available but when I go to the default folder they are not listed. Is there another location they may be being saved or has my default location somehow been changed? My AppData folder shows a creation date of 11/17/15 with no modifications being made in favorites since that date.

Answer:Microsoft Edge Favorites not in default folder but availalbe in Edge

Hello mongands, and welcome to Ten Forums.

Microsoft Edge Favorites - Backup and Restore in Windows 10 - Windows 10 Forums

Microsoft Edge Favorites - Add or Remove in Windows 10 - Windows 10 Forums


   Note
Starting in in Windows 10 Insider Preview build 10565 and Windows 10 TH2 version 10511 build 10568, your favorites and favorites bar in Microsoft Edge are now stored in an ESE database file in the DataStore folder at the location below.


Code:
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\AC\MicrosoftEdge\User\Default\DataStore

1 more replies
Relevance 37.31%

Hello Everyone,I need suggestion what to do: buy ThinkPad Edge E54020C6003AGE (i7 4702MQ & GF 740M 2GB) or wait for Edge E550?http://www.notebookcheck.net/Review-Lenovo-ThinkPad-Edge-E540-20C6003AGE-Notebook.114194.0.html in Germany is price about 830 Euros I use ThinkPads in last 10 years for study and gaming (R60, SL510, Edge 520) and wish sell my Edge E520 replace it with new one due stuck with old Radeon 6630M drivers (I cannot use a new AMD drivers when I try I getting mostly BOSD errors and latest Official Lenovo driver is from 2012) second reason is that E520 fan cannot be accessed & cleaned on easy way. In which month Lenovo mostly release new Edges, What is your option are Broadwell CPU + GeForce 840/940M in Edges worth to wait? In future I try to avoid AMD GPU due poor drivers support.I know that there is much better notebooks for gaming but I like ThinkPads





I Have this Lenovo Computers1. Think Centre M58 from 2008 an it is still good (Intel Q9550, 8GB DDR3, Radeon 6970, Intel SSD)2. ThinkPad E5403 ThinkPad Tab 2 (with it I have many problems)4. Lenovo Vibe Z2

More replies
Relevance 36.9%

CCleaner is a great clean-up tool which I've used successfully for many years, but it will not clean Microsoft Edge. The line simply says "Microsoft Edge skipped". I've uninstalled CCleaner & re-installed it, but same problem. Can anyone help

Answer:CCleaner Skips Microsoft Edge - Won't Clean Edge

I thought the latest update cleaned edge as well.
Click here

6 more replies
Relevance 36.9%

I tried upping from recommended 250% to 350% for use of a genealogy program made that program larger but nothing else and if I use pinch to spread out and enlarge then screen impossible to work on because it just jumps from side to side I set everything back and restated and still the same display smaller than before.  I have Nvided GEForce 960M video card and right now laptop is useless.

Answer:Display on XPS Infiniti edge to edge now so small cannot read anything

I didn't even realize you could go that high.  When I tried 250%, some things became so large that it became impossible to click important buttons since there wasn't enough display area to present them.  It sounds like your genealogy program isn't scaling-aware.  Also note that in some cases, after changing the scaling setting, you need to log off and back onto Windows for the change to fully take effect.
Also, what version of Windows are you running?  The display scaling functionality has changed significantly with each release of Windows from Win7 on, including within the various releases of Windows 10.

1 more replies
Relevance 36.9%

New system. .   ran virus & malware scans. .   cleaned startup . . 1st 10 min after laptop turned on hard disk running at 100 % . .   it then drops to 10% or less . .  but when opening an app or browsing it jumps back up again . .     apps   running slow. . .  ! Thanks

Answer:Lenovo edge 15 & edge 2 hard disk running at 100 %

Sorry running windows 10 . . .

1 more replies
Relevance 36.9%

I have the same exact set up on both machines (very darn close) and Ive always noticed that Edge consumes around 500mb-1GB of mem upon start up with my predesignated 5 tabs.
After the TH2 update on my desktop, I was blown away that Edge now only consumed 30-150mb, even with a twitch stream rolling in the background for extra measure. However, on the SP3 (after TH2) the memory usage is still the same
What gives?

Answer:Edge on my desktop vs. Edge on my SP3, Performance/Memory Usage after TH2

I don't know that one. But I have ditched edge until they get ad blocking capabilities baked in.

3 more replies
Relevance 36.9%

On Edge 13 it's a well-known problem that the headphone jack has a constant hissing noise http://forums.lenovo.com/t5/ThinkPad-Edge/Edge-13-AMD-Hiss-Distortion-and-EMI-Noise-on-Speakers-and/...  I'm thinking of getting an Edge 11 -- can anyone verify if this problem has been fixed in this model?

Answer:Edge 11 -- Does it have the hissing noise problem with headphones like Edge 13?

I have an Edge 11 (Intel) and have no hissing sound with the headphone jack. I was actually very suprised when I first plugged headphones in, having getting used to the hissing noise on my Edge 13.





ThinkPad X1 Carbon i7-3667U / 8GB RAM / 180GB SSD / Windows 8.1 ProThinkStation S20 Xeon W3550 / 12GB RAM / 2x 120GB SSD + 250GB HDD / NVIDIA Quadro / Windows 8.1 Pro / 2x Dell P2214H IPS Full HD monitorsPrevious ThinkPads: R500, X61, Edge 13, Edge 11, X301, T420s, W520, X220, ThinkPad Tablet, ThinkPad Tablet 2, X230

1 more replies
Relevance 36.9%
Question: XP Non Responsive

Ok my brothers PC is having some issues. It will load into XP and all the desktop icons will pop up but you just cant click on anything. I am not sure if it is supported by the forum but I used the latest Hiren's Boot CD 9.9 to boot into mini xp ran spybot search and destroy and kapersky - came back with nothing. Also tried other programs but no others seem to work. Anyone know anything about this and the PC problem? Thanks

Answer:XP Non Responsive

Try booting into Safe Mode. If that works, you can try running MalwareBytes and SpyBot Search & Destroy from there.

If it doesn't, try booting from the XP CD and performing a Repair.

8 more replies
Relevance 36.9%
Question: IE Not Responsive

I hope I am posting in the right place. My Windows 7 pc has been acting up for quite a while. I am not sure if it's an ISP issue or just my pc. When I am running IE or Firefox or Chrome, my websites become non-responsive. Or I will click on a link and nothing happens. It is very "jumpy" meaning pages seem to lock and then switch to new pages after some time has passed. I get the message box pop-up saying that IE is uisng so much RAM and it is usually over 250 MB. I am not sure if it's a hardware issue or internet issue. I did a speedtest and came back over 4 mbps. My issues seem to get worse by the evening. I don't have many issues when using software...just internet websites.

Running a Compaq Windows 7
AMD Dual-Core procesor 2.3 Ghz
3 GB RAM
 

Answer:IE Not Responsive

16 more replies
Relevance 36.9%
Question: non responsive xp

My computer speed is good in most aspects but runs hot and for the last 2 days will not connect to the internet. Any suggestions?

Answer:non responsive xp

Good morning Sharbrooks and welcome to TSF. I would be happy to assist you however I will need a little more information so that I can diagnose the problem for you.

Here are some questions for you to answer that will help me. Just answer them the best you can and if you dont know an answer its ok. If you already answered anything I'm asking in your first post just skip over it.

1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro? Which Service pack?
4). What antivirus are you using? Firewall if any.
5) Please tell us a little about your computer. How old is your computer? Hard drive, processor, ram, video card. Ect.
6). Do you have an Xp disk for this computer? Is it a full installation CD or one from like Dell, HP, Ect.
7). Does your computer have a floppy drive, CD drive, Ect.?
8). Do you have access to another working computer with an internet connection?
9). Did you noticed this problem occuring after installing anything recently?
10). Has your computer done a windows update recently?
11). How does your computer connect to the internet? Wireless, wired, or God FORBID Dialup, LOL. Is there a router in line?

and anything else that might help us help you. Remember we are trying to help from a forum so all we have to go on is what you can tell us.

I will monitor this thread throughout the day... Read more

2 more replies
Relevance 36.9%
Question: non responsive pdf

every time I try to open a pdf file on the net, it just go nonresponsive. I have adobe 7.0. Ive tried saving target , it saves but wont open. What can i do to get the pdf files i need to open?

Answer:non responsive pdf

try a program called foxit reader...

might just be acrobat reader thts slow?

it is quite a heavy program.

pm me if u need foxitreader. its a pdf viewing software and not at all heavy.

2 more replies
Relevance 36.9%
Question: XP non responsive

Hi

Earlier today I installed Outpost Free Internet Security, it crashed my network connection so I uninstalled it, then had to perform system restore. Then I opened MS Outlook and PC turned itself off immediately and restarted. Message came up that Windows had recovered from a serious error.
Came on tonight no programs would open, i have put Xp disk in to try and fix and it seems okay(ish).
Other anomaly is that i keep getting message " this computer has undergone significant hardware changes since Xp installed and XP needs reactivation within 3 days. I have had to do this on average once a month including today.
I rang Microsoft to activate over the phone and spoke to a real, very helpful person who also found it strange that it keeps asking to reactivate.

Anyway I have attached the logs from event log, dont know where else to look for errors. Please if you can help i would appreciate it as I am pulling my hair out.

Di

Answer:XP non responsive

Quote:




i have put Xp disk in to try and fix and it seems okay(ish)




What is Okay(ish) really mean? does the computer work properly, and do all of your programs work? You do not have to include all of the logs. Just instances with a red X the yellow warnings don't mean that much, and the logs are too long to read through.
You can do some maintenance. Go to Start/Run and type chkdksk C: /R and press enter. Then press a Y for Yes and then restart the computer. Check Disk will run at next bootup to fix any file errors. You can also go to Start/Run and type SFC /scannow and press enter. Put the XP CD in and it will replace any missing files from the CD. If you don't have a current Anti-Virus Software, download the free Microsoft Security Essentials (do not have more then one AV software program on your computer at a time) and do a full scan. Also go to Start/Run and type dfrg.msc and press enter, highlight the C: drive and press Defrag Now.

12 more replies
Relevance 36.9%

Windows GDI update for 2k3. My IIS 6.0 server just started getting flaky on me. Only one website - all ISAPI shutdown - only .asp extensions allowed. URLScan 2.5 installed.

No notice in the logs - just an unresponsive IIS 6.0 server. Doesn't appear crashed, and no insane processes - i.e. no hogs. However, it just goes down - and I have to restart IIS 6.0 to get it running again.

Nothing has changed- except for a patch from microsoft a few days ago that was a "GDI update". Anyone else seeing IIS 6.0 flakyness in the last 2 days?

I thought it might be a DOS or something - but wouldn't a syn attack shut down all my interfaces? Or just the interface in question? What kind of logs would I look for to see some kind of attack? I have Scan Alert which scans my server and reports 0 vulnerabilities. So - at least I have taken care of some of the obvious attacks.

anyone have thoughts for debugging or unravelling this issue?



Thanks
 

More replies
Relevance 36.9%

I am trying to restore the computer to original factory settings AKA "AS FURNISHED" because of a crashed hard drive. The F11 key does not let me get to system recovery and the computer goes to a black screen with a blinking cursor - Windows 7 Operating System. I have a boot disk which lets me get to recovery however, system restore does not work as there is only one restore point so I am screwed. I do not have an image to restore to either. Any suggestions?
 

Answer:F11 Key non responsive

try another keyboard
 

2 more replies
Relevance 36.9%
Question: XP NON RESPONSIVE

OCCASIONALLY I BOOT UP AND TOWER LIGHTS COME ON H/D RUNS EVERYTHING LOOKS NORMAL BUT SCREEN DOES NOT ACTIVATE.  SCREEN PILOT LIGHT FLASHES .  CHANGED SCREENS - STILL SAME PROBLEM.  UNPLUG  MAINS AND REPLUG SCREEN PLUG AT BACK OF TOWER - AFTER ABOUT 5 MIN IT THEN BOOTS NORMALLY.   :-? 1. CHECKED ON POWER OPTIONS CTRL PANEL SAYS UPS NOT ACTVATED BUT NO OPTION AVAILABLE

Answer:XP NON RESPONSIVE

First, turn off the caps lock key, unless it is broken too. That is considered rude.To get any meaningful help you need to give some information about the system, how old it is, when the problem started, other problems with it, what happened unusual right before it.So info on the computer including the make and model number and the power supply, including maker and wattage (it's on the side of the power supply inside the case).See below. We'll be waiting for your responses.

1 more replies
Relevance 36.9%
Question: Non-responsive HDD

(I'm sending this from wife's laptop so TSG Sysinfo not much use!)
System: 'Advent' tower PC, Intel Core i7 3440 3.4Ghz Quad Core CPU; 12Gb RAM (DDR3); 2Tb HDD (Seagate)(SATA), using Windows 7.

Sequence of events:
1 Attempted to reboot PC following a minor update but PSU did not power up - it wasn't a particularly quite unit so silence pointed to a PSU fault. On removing the cover, the CPU cooling fan was not operating either, confirming no power.

2 The OEM PSU (CWT GPA450P) was not easily replaceable. Having had to replace PSUs in earlier PCs, I opted for a Corsair CX500M. At this point, I committed the cardinal sin of not practising what I used to preach before I retired - having replaced PSUs before, I did not think I needed to RTFM! Having removed the faulty PSU, I unpacked the replacement and fitted the black box in position before noticing that there were some significant differences between the OEM PSU's 'open' cable loom and the Corsair's sleeved loom. One of these difference was that instead of the 'old fashion' direct cable links to the SATA devices, there was a variety of alternative modular connectors. Had I read the Manual, of course, I would have seen that these plug into the PSU via black sockets on the face of the black CPU box but at this point, they were now hidden in the dark depths between the PSU and the back end of the DVD drive housing. Instead, I looked around for a connector that fitted a 4-pin ... Read more

Answer:Non-responsive HDD

Hello, unfortunately there is a very good chance that the HDD was damaged by the psu incident. The easy way to determine that would be to remove the hdd and then hold it while the pc is turned on. You should be able to hear and feel the platters spinning. After that, just to make sure, you can use a sata to usb adapter and plug it in to a different computer and see if it detects it.
 

3 more replies
Relevance 36.9%

My friend finally brought his pc into me and asked for my help in fixing it as he has not been able to use it for the last 2 years!!!He blames virus infections and he is not wrong. He keeps getting the dr watson postmortem debugger message and I have turned this off in the registry by changing the Aeopen value to 0 from 1.I have instaled most of the recommended fixes from a previous thread and run sfc /scannow.Over 1500 objects were detected by a-squared and I've not been able to run a AVG virus scan yet as the main problem is that now I'm getting an Explorer error (explorer.exe - application error)and cant open any explorer window or control panel in normal boot, but I can in safe mode.The pc is running windows xp sp2.Your suggestions would be most appreciated please.

Answer:Help with non responsive pc please

The Simple answer is I guess - Startover if the appropriate Windows disk is available.

10 more replies
Relevance 36.9%

ive been having a lot of problems with my computer i get way more pop ups than i usually should and things just move so much slower, i cant stand it anymore i did what u guys told me to so im posting my result.txt here it is please help as soon as possible

====================================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 9/28/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\PROGRA~1\NORTON~1\NORTON~2\GHOSTS~2.EXE
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton Utilities\NPROTECT.EXE
C:\PROGRA~1\NORTON~1\SPEEDD~1\nopdb.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Norton SystemWorks\Norton Ghost\GhostStartTrayApp.exe
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton SystemWorks\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton SystemWorks\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [ccApp] "C:\Program Files\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [ccRegVfy] "C:\Program Files\Common Files\Symantec Shared\ccRegVfy.exe"
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\c... Read more

Answer:More pop ups, very non responsive

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to Subscribe to this thread (Thread Tools) so that you are notified when you receive a reply.

Please be patient with me during this time.

2 more replies
Relevance 36.49%

I am so frustrated with my computer it is a gateway and I used vista & Google chrome - everyday I put up with NON-Responsive messages I've tried contacting google, NO RESPONSE.....I've tried going through my Hughesnet people they just send me a generated message on how to restart the system......I'm not sure why its doing this or why it's going to dang slow....Any suggestions on what to try next???
 

Answer:NON responsive messages

6 more replies
Relevance 36.49%

my bomputer isnt responsive at all. when i click my browser to go on the internet, scroll down pages and type it will freeze for a little while then load. it takes about 15 seconds for it to go. have no idea whats making this do this, help would be appreciated.
 

Answer:Solved: not very responsive

6 more replies
Relevance 36.49%

Okay, I've Googled this and tried a couple of websites looking for an answer, but so far no luck. At times, for no appartent cause, everything in my taskbar will suddenly become completely non-responsive. I can click away all I want on "Start", on quick launch items, on minimized programs, on icons in the system tray ... nothing, nada, zilch. When I go into the control panel and click on "Taskbar & Start Menu", the same ... no response. It just sits there in sullen indifference (that last bit is peotic licence). The only cure is a reboot.
Can anyone shed some light?
Thanks!!
 

More replies
Relevance 36.49%

Got a solicited Outlook email which I opened.
That brought up several major areas or topics with the option to select one by cuing on a "button" for that one.
However, that accomplishes nothing, regardless of whether I click with the left or right mouse button. There are no url's, (?) to copy or select, nor could I find anything else to select or cue to open the sub category.
Not sure what is going on! Why set things up so one can select a topic if selecting does nothing.
Almost sounds like I designed it, and I am an illiterate computer illiterate

Sarge
 

Answer:Selection Non Responsive

Tried another email. Not sure if another mailing is from same outfit (see previous), but same situation
 

5 more replies
Relevance 36.49%

This may be a double post, but I can't find my original posting.  My x230 is approximately 30 days past warranty (Windows 7 Pro).  Overnight it has become non-responsive. I have tried with and without battery, two different power supplies. I have tried, multiple times, holding the power button down to "discharge"?  No lights showing, no response to any buttons being pushed.  Within the last week I accepted Lenovo's prompting to update various files, including BIOS.  My recollection it has been re-booted at least once since the Lenovo system updates.  For what it is worth, I have always had the touchpad "turned off" via the software.  Any help, thoughts, or insight would be appreciated.

Answer:X230 non responsive

Make sure that you hold the power button down for a minute without the battery in! Otherwise its a motherboard issue and you might need to buy a new one

1 more replies
Relevance 36.49%

machine sometimes will not open programs or when you do they will not respond. sometimes I have to do a manual boot because I cannot click on start to shut down machine. I run winpatrol, zonealarm, avast home, celeron 2.0 win xp pro stripped to the bone and 512 ram. TIA for any help. juntuo
 

Answer:win xp pro hang non responsive

When you can get to it, press ctrl+alt+del an look at your running processes. How many? Is there one or two that seem to be using a higher % of the CPU aside from system idle?
 

10 more replies
Relevance 36.49%

I have a computer with a 1000 MHz Pentium 3 processor, with 384 Mbs of RAM and a 3DFX Voodoo3 3000 video card. I run certain programs and at some point windows gives me an error message telling me that it is "non-responsive". Any suggestions?
 

Answer:Non-responsive programs

Hiya

Lets see what you have running, as you may have some background things running causing this problem.

Lets take a look at a log. go to http://aumha.org/downloads/hijackthis.zip , and download 'Hijack This!'.
Unzip, doubleclick HijackThis.exe, and hit "Scan".

When the scan is finished, the "Scan" button will change into a "Save Log" button.
Press that, save the log somewhere, and please copy & paste its contents to the forum.

It will possibly show other issues deserving our attention, but most of what it lists will be harmless or even required, so do NOT fix anything yet.
Someone here will be happy to help you analyze the results.

Regards

eddie
 

1 more replies
Relevance 36.49%

OK where do I start

Yesterday (sept [email protected] around 8pm) evening I was prompted to update Mozilla, to the newer 3.5.3. I did just that, after the update it required a restart, did that, I clicked on Mozilla icon to continue my browsing, Mozilla would not load. So now I go and click on the Norton icon to run a scan and see if everything is ok. Norton will not respond either, just the hour glass shows up and then disappears. I go and click on IE and see if that will run for me, it does, and it is slow real slow, I have not used IE for at least 2 years, I figured it was the version I am running.

I decide to restore the laptop back 2 days to get my old browsers versions back, no dice, that was all for last night.

Today I restore the laptop back to AUG 18 and it told me nothing had changed, I was left scratching my head, I installed at least 15 updates the past 3 days, so something should have changed. I tried Norton again, no dice it wont even allow me to get support. I decided after chatting with a fellow fisherman to un install mozilla, and download and run Malwarebytes Anti- Malware. It pulls 268 infected files out, 3 of which are trojan files I restart the laptop and rerun this again and get 42 more files.

I try Norton again, nothing, I re install Mozilla nothing, I try Opera, nothing. Next I download and install Super Anti Spyware save it on my desktop, and restart the laptop in safe mode and run a full scan with SAS it gets 49 more files one of which is a Trojan.media-cod... Read more

Answer:Non responsive browser and.......

Howdy minivin5. Glad to see you made it to the site.

32 more replies
Relevance 36.49%

OK, I booted up my computer and then left it for several hours, working on it from my laptop with remote desktop. When I came back to it(never left the house) it was off. I said to myself, thats weird and tried to boot it up and nothing happens except when I flip the switch back and forth on the ps, I get a brief light to flicker next the power button. The lights are all on on the mobo, it just won't boot. I can't get any fans to turn on, no sounds at all.

What do you think my problem is???

Scout353
 

Answer:Computer non responsive

Sounds like the power supply might be shot. Incidently flicking it on an off can cause surges which may cause more damage.

Matt
 

4 more replies
Relevance 36.49%

First program to stop responding was dvd cyberlink now it's spread to mmc.exe any fixes for this. The programs according to the eent viewer seem to stop interacting with windows.
 

Answer:Non responsive programs

You need to supply more info: brand and exact model of computer and Version of Windows you are running.
 

8 more replies
Relevance 36.49%

Recently had problems with computer flashing multiple windows of emails or advertisements.  Thought the was computer infected so I just reformated the HD and reloaded XP Pro and SP2.  After what appeared to be a successful load, I went to load the two programs, which also appeared to load successfully.  When I went to load the new printer drivers, the computer became non responsive.   It appeared to lock up.  When I went to see if one of the new programs would boot up, I double clicked on the desk top, and mouse pointer/hour-glass would constantly flash at different points on the screen.  So I went to the Start menu and went to 'all programs'.  When I attempted to leave the 'all programs' to select the program I wanted, it would send me back to the dest top, and I couldn't get either of the programs to start.   I tried a different video card but the problem is the same.  I can't get any of the programs to respond.    Appreciate any advice.

Answer:Computer non-responsive

Is it a real XP CD that says Microsoft all over it?A good format and reinstall should solve all problems for a while IF the hardware is functioning correctly. Did you format the drive during the installation?

1 more replies
Relevance 36.49%

Hi All
Anybody familiar with the Zen micro photo? I went to turn mine on and all the music was missing. It will not let me reload any music in it even after I went to the web site and preformed all the cleanup & firmware and reboot sequences, got nothing. Also when I did the clean up it scans till 35% and stops. Pretty sure it should go to 100%. IT turns on, boost up and all the screens come up but there is no music stored in any of them. Any help would be great.
 

Answer:Un responsive Zen microphoto

it sounds as though there is a fault with the player's memory
 

3 more replies
Relevance 36.49%

I have on system that has become very slow and non-responsive. The hard drive light shows constant activity, but the Task Manager CPU usage is running low. I've updated my AVG and ran a scan with Spybot.

I've been running a RootRepeal scan but it's over an hour and no results yet.

Here is my DDS.txt file:

DDS (Ver_09-10-26.01) - NTFSx86
Run by Mike Wochholz at 13:48:42.39 on Sat 11/21/2009
Internet Explorer: 6.0.2900.5512
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.958.415 [GMT -6:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\brsvc01a.exe
C:\WINDOWS\system32\brss01a.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\AVG\AVG9\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:�... Read more

Answer:Slow and non-responsive

Welcome to the BleepingComputer Forums. Since it has been a few days since you scanned your computer with HijackThis, we will need a new HijackThis log. If you have not already downloaded Random's System Information Tool (RSIT), please download Random's System Information Tool (RSIT) by random/random which includes a HijackThis log and save it to your desktop. If you have RSIT already on your computer, please run it again. Double click on RSIT.exe to run RSIT. Click Continue at the disclaimer screen. Please post the contents of log.txt. Thank you for your patience.Please see Preparation Guide for use before posting about your potential Malware problem. If you have already posted this log at another forum or if you decide to seek help at another forum, please let us know. There is a shortage of helpers and taking the time of two volunteer helpers means that someone else may not be helped. Please post your HijackThis log as a reply to this thread and not as an attachment. I am always leery of opening attachments so I always request that HijackThis logs are to be posted as a reply to the thread. I do not think that you are attaching anything scary but others may do so. While we are working on your HijackThis log, please: Reply to this thread; do not start another! Do not make any changes on your computer during the cleaning process or download/add programs on your computer unless instructed to do so. Do not run any other tool until ... Read more

2 more replies
Relevance 36.49%

Sometimes my XP machine (P4 2.6ghz, 512ram) gets in these weird cycles where some of the buttons on applications wont respond to me clicking on them, and sometimes, it switches the left click for right clicking. This seems to happen more often when I leave the computer on for a while.

Any ideas for fixes ?
I guess I should also mention that this seems to happen regardless of what type of mouse/keyboard im using, and whether its ps2 or usb connection.
 

More replies
Relevance 36.49%

I just done a fresh reinstall.  Reinstalled my drivers an SP 3.  When I go to the windows update page it dont come up

Answer:Updateing Non Responsive

I would check your Internet connection...did you remember to re-install ALL your drivers ?

4 more replies
Relevance 36.49%

my computer screen remains blank when i boot up my computer

im running ubuntu

*i think the slot for the monitor is broken
*its not the monitor
 

Answer:Monitor not responsive

16 more replies
Relevance 36.49%

How do I fix "non-responsive script"? The computer freezes when this happens and stays that way until the message comes up about the script. It's usually the same two or three things...script: chrome: //google-toolbar-lib/content/toolbar.js:82; ...or script: http:'//www.java.com/js/deployjava.js:45;...or script: chrome:///javaconsole1.6.0_20/content/ffjcext:20.It's annoying to be working on something and have the computer freeze up.Thanks for any help!

Answer:non-responsive script

Sounds like a virus.

2 more replies
Relevance 36.49%

I think I pretty much know the answer to this question however I'm in a slight dilemma.

I have an HP laptop here with the trackpad not responding at all. I dug all of the viruses out of it and reinstalled the drivers several times, as well as a system restore from 10 days ago. But the trackpad still didn't work. I considered re-imaging it since it has a recovery partition with a factory-loaded default image, but instead I decided to pop in a Linux LiveCD.

Upon booting Ubuntu, the trackpad still didn't work.

I checked all Fn keys. Nothing helped activate it. There's also a dedicated on/off button by the trackpad. It of course is enabled.

I think it's pretty safe to say it's hardware related, but my tools are at work and this is bugging the **** out of me. Is there anything else you guys think I should try before I crack this thing open tomorrow?

Answer:Trackpad Not Responsive.

There is a cable that connects that trackpad to the MB, while you do have to take a lot of the laptop apart to get to this cable it isan't as hard to get to as the processor. I agree, it does sound hardware related (assuming you've hooked up an external mouse and it worked) and if the plug is fine, you may need to replace the track pad.

My Pavilion laptop has a button right above the trackpad that turns it off - stupid i know but just make sure that light is on if your laptop has that button.

1 more replies
Relevance 36.49%

slow browsing and non responsive my browswer takes a few minutes too start up from cold booting and sometimes its non responsive for a few minutes then starts working again can someone have a look at my hijack log thanks ive scanned for viruses none present used mal aware bytes and spybot search and destroy and its all clear

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:35:00 PM, on 28/08/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18813)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\System32\CTHELPER.EXE
C:\Program Files\Creative\Sound Blaster X-Fi\Volume Panel\VolPanlu.exe
C:\Windows\System32\Ctxfihlp.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Common Files\logishrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Hercules\Audio\DJ Console Series\HDJSeriesCPL.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\Creative\MediaSource5\Go\CTCMSGoU.exe
C:\Windows\ehome\ehtray.exe
C:\Windows\SYSTEM32\CTXFISPI.EXE
C:\Program Files\Systweak\Advanced Vista Optimizer 2008\AVO.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Windows\ehome\ehmsas.exe
C:\Program... Read more

More replies
Relevance 36.49%

Hi Tech Guys!!

This probably seems like a trivial problem to you.

when I try to run certain apps from my desktop, the desktop just crashes

I have tried reinstalling Windows twice now and have come across the same thing on each fresh Install!! THE PROBLEM IS FOLLOWING ME

When I start in safe mode the problem does not occur at all

It is not just the desktop though, if I go to my docs and to the desktop folder, they dont load from there either, just crashes "my computer"

Its the same for any app I try to run with a few acceptions, i.e itunes, Firefox, MSN

Cheers for your help guys!!!!
 

More replies
Relevance 36.49%

Hey everybody this is my first post on Techguy,

The reason Im posting is because My Laptop, which ive had for about a year now, Is an HP dv1000 model if I remember correctly( im in the library right now) and when I went to turn it on saturday afternoon all it did was turn on and stay on a black screen, it did not respond to me pressing any button at all and even my wireless usb mouse didnt get signal. I left it on untill the batter ran out to see if that worked and when I turned it back on it was still the same. I also tried putting a music CD in but that didnt affect it at all. Sorry if this is in the wrong section but Im not sure where the problem is coming from.

Thanks in advance

Mario
 

Answer:Non responsive computer

16 more replies
Relevance 36.49%

Hi

Got a Win XP SP3 Compaq desktop here, none of the USB ports are working. 4 are flagged with the yellow marker in Device manager. If I uninstall them then let Windows redetect it asks for the file 'seehcri.sys' which I cannot find anywhere.

Any suggestions on how I can fix this?

thanks

Gav

Answer:usb ports non-responsive

You need to install the drivers for them.
To do this go on Compaq (hp's) website and go to the driver download section and enter the model of computer in and there should be a section on usb ports and there will the drivers that you need.

3 more replies
Relevance 36.49%

Okay, I've Googled this and tried a couple of websites looking for an answer, but so far no luck. At times, for no appartent cause, everything in my taskbar will suddenly become completely non-responsive. I can click away all I want on "Start", on quick launch items, on minimized programs, on icons in the system tray ... nothing, nada, zilch. When I go into the control panel and click on "Taskbar & Start Menu", the same ... no response. It just sits there in sullen indifference (that last bit is peotic licence). The only cure is a reboot.
Can anyone shed some light?
Thanks!!
 

Answer:Taskbar non-responsive

14 more replies
Relevance 36.49%

I bought a MS Wireless Optical Mouse some time ago. The installation was not a problem, however I have a very strange problem in that for no apparent reason sometimes the mouse will have no or very delayed responsiveness to clicks and scrolls.

This is very annoying and when I use the spirit of the irritation built up to press the button harder this will most often on 3rd or 4th occasion get the mouse in action. After a while it the non responsiveness stops (10 minutes to one hour) and the mouse will work fine again. It is not normally a problem on start up.

I have changed batteries, reset the mouse "receiver", installed more RAM (now have 512 MB) and nothing has helped.

Can anyone out there please help me as this is very frustrating.

Finally, if I use the keyboard (when possible) there is no delay, only when using the mouse (so if I cannot scroll with the mouse there is no problem using the arrows up and done for example)...

Thanks in advance to anyone who can help! Will be much appreciated.

Brgds
Bobby
 

Answer:On and off non responsive mouse

FWIW, I just had a similar issue with my Logitech cordless optical mouse. I finally took it apart and it has several really huge dust bunnies blocking the scrolling wheel. Cleaned it out, and all is well.
 

3 more replies
Relevance 36.49%

My daughters pc will not respond when it is switched on. There is power going to the speakers via the kettle plug lead for the speekers, but Windows doesn't boost up at switch on. The monitor works as there is power going to it. The processor is a CYRIXIII,64ram,4gig hard drive,SIS530 CHIPSET. Win98,WinOffice2000 & 32ram have just been fitted in the last few months. It also has Norton Antivirus2001 installed. The CDrom does not respond either. PS PLEASE HELP IF YOU CAN THANK YOU..........

Answer:None responsive at switch on

firstly check the lead and fuse in the plug, check the switch on the back of the power supply if there is one, is the power supply starting?(fan spinning)

3 more replies
Relevance 36.49%

After warm boot PC goes into a lock-up for 3 minutes, it does the same thing periodically during run time.
OS is XP
4GB RAM
Disc 500GB (98% free)
Email Client Mozilla Thunderbird 3.1.1
Browser IE8
Have tried:
Webroot Virus Detection
Malwarebytes Anti-Malware - Malware removal
Registry Mechamnic

NOTHING WORKS!
 

More replies
Relevance 36.49%

I have a computer running XP SP2 + all updates to date, for a few months now when you go to press the start button the system can take upto 30-60 seconds to respond, once it does your right for another few minutes then stop's responding for another 30-60 seconds and keeps repeating this cycle. I have checked all running processors and there doesn't seem to be anything there that should be.

My initial thinking is that it's trying to check something which holds the system up regular???? Anyone else have this or seen this problem???

Thanks in advance!!
 

Answer:Start Bar not responsive

Demise of power supply is on the horizon....
In order to better respond to your question or problem

We require more detailed and specific information

Please repost your request with:

Computer: Brand Name

Age of system:

CPU: Brand, speed

Ram: Type, amount, speed

Peripheral devices

Operating system: Windows 98, 98SE, ME, XP Home, XP Pro, Other

Do you run Anti-Virus software: Brand Name, version #, date of most recent AV signature file

For Video or Graphic problems

Video Card: Brand Name, type, speed, Chipset, driver version and date

Video settings: resolution, advanced settings

For Internet problems:

Modem: Brand name and date of driver

Type connection: dial-up, cable, sat/DSL, other

Browser: IE, Netscape, version #

For Network problems:

LAN card(s): Brand, # of cards

Router: Brand name, type

# machines on network

Network settings and IP configuration

Please state your specific problem and when it started

Did you change anything, install anything before the problem started?

List any recently installed software

List software running in background ie: anti-virus program, mail programs, backup software.

Any power disruption or incomplete shutdowns

Failed Scandisk/chkdsk or defrag attempts

Use of any &#8220;tune-up&#8221; utilities, registry utilities, system diagnostics, other third party utility software

Recent downloaded software

Any new programs or files that have recently appeared in your STARTUP menu or msconfig STARTUP listing
... Read more

2 more replies
Relevance 36.49%

i made changes in my c drive since then my application are non responsive and acting weired. Please help me i m not able to use my laptop

Answer:Applications are non responsive

What changes you did in which program?
Provide some details about it..
so as it is useful for others to help you..

8 more replies
Relevance 36.49%

I have An ECS K7S5A Pro mother board with a keyboard that won't respond. This is one of the stangest issues I have have ever come across dealing with keyboards. When the computer boots it will boot into Windows XP and the keyboard will not respond but the mouse responds and device manager shows no keyboard listed and no conflicts. Then when you reboot the computer and try to access the bios the the key board still won't respond and the computer boots into Windows as before. No "no keyboard" errors are posted on boot up. I have tried all of the standard trouble shooting techniques (trying different keyboards switching cables etc...). Is the anybody that has come across a systoms like this? I am reluctant to condem this MB because I don't know for sure whats wrong Thanks Scott
 

Answer:Non responsive Key board

Is the keyboard standard PS/2 or the USB kind ( too lazy to check on the specs of the board).
But let's assume that the keyboard is the PS/2 kind. If you tried the usual "song and swap" and still no response, then it's the board chip that is messing up. I would give it a last shot, but looking on the mobo and trying to clear up the CMOS if you haven't tried it yet.
HTH
 

2 more replies