Computer Support Forum

Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

Question: Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

My company's computer needs to be patitioned and reformat. The system is still working well. I mean, nothing wrong with anything (weird huh?). Ok the hard disk just need to be 'split'. I mean, make drive C & D on the hard disk. I know how to do that... easy... Then the HD need to be formatted & reinstall windows XP. Ok, easy too..

But the main problem occured before I do anything (partition & format). I have my own bootable CD that I usually use for partitioning & formatting.

Ok, i insert the CD & restart.
I went to BIOS & changed the boot order (1st boot: CD-ROM, 2nd: HDD-0 & 3rd: Floppy). Then restart again.
Ok the bootable CD is excellently loaded.
I typed fdisk, then came the first problem. it says something like 'no fixed disk'. I exit fdisk.
Then I typed format c:, 2nd problem occured. it says something like, 'invalid drive'.
I forgot the error message because the pc is in my office right now. I'm currently at home 'begging for help' So the error message is not accurate. sorry..

I think, if I run the CD, the hard disk will not be loaded (or should I say, hard disk failure). & If I take off the CD & restart again, change the BIOS (1st boot: HDD-0) then windows will load! Weird right?

I don't think my CD is 'corrupted' nor broken because I tried to run the CD from another PC. Yes, I can access the C drive from that PC.

Does anyone have any idea of the possibilities here? Hard disk failure when running a win98 bootable CD? bad BIOS setting? File System?

Thanks

Relevance 100%
Preferred Solution: Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

It sounds like it might be the bootable CD you've created is not picking up the HDD's/partitions.
To eliminate this as a posibility travel to bootdisk and grab the WinME bootdisk and boot from there. If it picks up the HDD you can FDISK and Format from there.
The other option is to boot using the XP CD and let it handle the formatting/partitioning duties...

patio.

14 more replies
Relevance 105.85%

Windows XP sp2 wont boot from hard disk.

After much to do turns out my computer doesnt recognise the hard disk.

I have a seagate 500Gb SATA hard drive, its about a year old, the computer doesnt get hot in the slightest and it shouldnt be dead. I checked the wiring, as far as i can see, its all fine.

only conclusion i come to is that my hard disk is kaput which it shouldnt be. Can anyone give me any other possible solutions to try out before i cry and/or spend money on a new one? theres a lot of data on it i dont want to lose.

If not, ill plug it in to another computer to check, i havent done that yet because it will take me hours - i can only unscrew the hard drive from one side without rearranging the room.

ty!
 

Answer:Hard disk boot failure -> computer won't recognise hard disk

Is your Seagate the 7200.11 series?

We've been seeing a lot of harddrive issues layely that has nothing to do with the drive itself but bad SATA cables aas the cause. Do you have another one you can switch out?

When you say the computer doesn't recognize it we're talking the BIOS here, correct?

Another suggestion is what you have already suggested but I would "slave" it in antother system and see if you can access it that way.
 

5 more replies
Relevance 103.24%

Hi i have a 74 Gb western digital hard drive with C: and D: drives (i partitioned them)
the D: drive has all my gaming applications on it and the C: drive has all the files for windows/and other crap like firefox, etc.

I was once reformatting to XP from Vista and in the middle of reformat my computer shut down causing a major problem. the answer was my graphics card died... now i have an EVGA 256Mb 8600GT with DX10. I brought the drive to my neighbors house and he can use it just fine, it boots and everything... but... the problem is that when i bring it to my house, and i insert the drive it goes to the Nvidia Boot Agent and after a while displays HARD DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER. My current BIOS Boot order is Floppy, CD, and then Hard Disk. I don't know why it wont boot, but the copy of XP has been verified and it works great on my friends computer... why won't it start on mine?
Please help me !
 

More replies
Relevance 103.24%

hi sir,im vijay..
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk ...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir...till now its showin the same error sir...

plz help me..im so confused..

Answer:hard disk boot failure insert system disk press enter

Repair MBR:

Boot From the Windows Install Disc
The first thing you?ll need to do is boot off the install disc, and then click through until you see the ?Repair your computer? link in the lower left-hand corner.
You?ll need to choose the correct installation of Windows and then click the Next button.
And then you?ll get to the System Recovery Options screen, where you can get to the Command Prompt.

Repairing the Master Boot Record:

If you want to restore the master boot record, you can simply type in the following command:

bootrec /fixmbr

You can also write a new boot sector onto the system partition with this command (which is often more useful):

bootrec /fixboot

And of course, if you just use bootrec /? you?ll be able to see all the options.

6 more replies
Relevance 103.24%

when starting my computer, and no boot disk is inserted, i get the error message:"HARD DISK BOOT FAILURE INSERT SYSTEM DISK PRESS ENTER" when a boot disk is inserted, windows xp starts up if no button is pressed after a boot disk is inserted. I cant work out how to boot from hard disk immediately, and it is set as primary boot device. ANY help would be greatly appreciated!!!
 

Answer:Hard Disk Boot Failure Insert System Disk Press Enter

Just go into the Bios and (For my motherbaord) in Advanced BIOS Features, set primary, seconday etc boot devices as you like.
 

14 more replies
Relevance 102.66%

I formatted my hard drive today and after a reboot I got the message: "Hard Disk Boot Failure Insert System Disk And Press Enter" If I insert my Vista disk, hit f8 at startup and go to boot screen, click on boot from CD, then bypass the boot from CD option it will start Vista. I have checked my boot sequence and it shows booting from the right drive. My hard drives are SATA. Im stumped fellas......

Asus M2N-SLI Deluxe Motherboard
Two Hard drives but the second just for backup (not in RAID)




This is what my system information tool says on the hard drives:


Type Vendor Model Size Interface Temperature
Direct Access Device HDS72258 0VLSA80 SCSI Disk Device 82 GBytes IDE RAID
Direct Access Device Western Digital WDC WD16 00AAJS-60PSA SCSI Disk Device 160 GBytes IDE RAID
Direct Access Device SanDisk SanDisk U3 Cruzer Micro USB Device 1019 MBytes USB USB
DVD TSSTcorp SanDisk U3 Cruzer Micro USB Device USBSTOR RAID
DVD SanDisk TSSTcorp CDDVDW SH-S203N SCSI CdRom Device SCSI USB

Answer:Hard Disk Boot Failure Insert System Disk

UPDATE:


Changed my partition to active and re-booted, gave me this: "BOOTMGR missing"

Tried to repair with CD and the operating system was showing up on D:, dont know if this is usual but thought it show show C:

Went to Cromt in repair option and tried to rebuild bootmgr with this command:
"bootrec/rebuildbcd" restarted computer............BOOTMGR missing

Was then able to boot from second hard drive (D from boot screen.......finally gave up and formatted again......works fine now.

1 more replies
Relevance 101.79%

Hi there!. I was wandering if anyone could help me out. I am running XP pro and although i recently updated with SP2 the PC appeared to be ok. Now when i try to boot up i get DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. If i put my operating disk in it loads the various files and proceeds to windows setup if i chose to set up windows XP now ie re -install the whole system it goes to the licence agreement then to the windows xp professional setup offering options either to set up windows on the selected item or create a partition or delete the partition . Most imporantly in the box below it states 57240 mb disk o at Id on bus 0 on atapi and underneath <setup cannot access this disk> which is worrying. In the bios it appears to be able to detect the fact that there is a hard disk drive available. If i do press enter at this stage a darker blue screen appears stating that a problem has been detected and that windown has shut down to prevent damage. It then goes on to suggest things that are not possible ie boot into safe mode ofr update or disable drivers it gives the following technical information which for me as a beginner is as much use as a wooden eye. It say ***STOP: 0XOOOOOOO8e (OXCOOOOOO5,OXF99C6CFD, OXF95 A5800, 0X00000000)
*** Setupdd.sys- adrress F999C6FD base at f999d000, datestamp 3d6dd67f
whatever that means
If there is anyone who can help i would appreciate it. I assume the hard drive is ok and the connections are too.
 

Answer:Disk boot failure and the missing hard disk

Moved to Windows. This is not a business applications issue. Good luck!
 

3 more replies
Relevance 98.89%

I ran Dist Test in system diagnostics and read failed. Error log read Hard Disk Failed id# osng6c-5r76hw-xd6v4k-6odpo3 then next line same id but tune up failed then run in failed

Answer:SMART Hard Disk Error detected an imminent failure Hard Disk

Confirmed, You have a bad drive.

2 more replies
Relevance 97.15%

Hey guys, a few day ago my pc became weird. Windows often don't boot up, only sometimes.

So I tought, why not low level format everything and reinstall windows ?

I load up my Hiren's boot cd, run utility disk and low level format. Everything went well...


No! The PC won't boot anything, cd, floopy, usb. I even tried external CD rom.

But still no luck...

Help.. Thanks!

Answer:Disk boot failure, Insert system disk and press enter after low level format.

Hello and Welcome to TSF

Did you change the boot order in the BIOS to cd drive as first device?

4 more replies
Relevance 96.57%

Ok first off I want to say I've searched and searched and searched to no avail in trying to find a solution to this I've come to the conclusion it's software and not hardware based. Let me start from the top.

I've had an older computer (HP Pavilion a408x) out of commission for a while due to a 'sploded psu. I finally get around to ordering one, install it and everything is good. I bring it back to my office and hook it up to the internet and as expected there's updates. So I up date it and after the updates are installed the computer restarts automatically (weird yes) and as it's coming back on it detects errors and runs CHKDSK. So I let it run and it gets to part 2 of 3. At this point in time my partner is really needing to print sometime and all computers print through this computer. So after about 45 minutes CHKDSK is still on part 2 at only 15%. So I'm like "screw it" and manually shut down and restart. It's at this point I get a "primary master hard disk failure" at the boot screen. Letting start up continue I get a "Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll" At this point I realize something is delectably wrong.

Found this thread, which didn't help much. At some point the c000021 error stops and I start getting "disk boot failure insert system disk and press enter" and I found this thread, which didn't help much either. I have also been searching other sites as well.

Here's what I found ou... Read more

Answer:Hard Drive not found "disk boot failure insert system disk and press enter"

Anything would be super helpful, even if it's bad news. I just need to know if I can get this remedied or not.

Another thing I noticed is that the HDD activity light on the front of the computer does not blink or show any activity.

Thanks!

7 more replies
Relevance 94.54%

I attached this old hard disk of mine. It is a 20 gig hard disk ATA 100
I was thinking of partitioning in the following way.
4 gigs for Windows XP
4 gigs for Windows 2000(do i really need Windows 2000 and Windows XP on the same machine)
4 gigs for LInux
8 gigs for miscellaneous.

I have currently got a 160 gig hard drive with Windows XP, i will make it my apps/data drive, just in case something goes wrong with the 20 gig drive, i will still be able to boot using my apps drive.

If i make the second drive my apps drive, do i need to have it in Slave mode, my motherboard has four IDE connections.

Answer:want to partition my hard disk and make it my system hard disk

Wait.... if you had the 160 as the drive with applications on it? Yes, it would be slave (jumpered) if you plan on booting from the 20GB.

5 more replies
Relevance 93.96%

Can anyone tell me why someone moves a partition..How do you format the disk..is it for to save a backup on...if so how do you save something on it...if the pc crashes is the partition gone...is your backup saved....Can someone point me in the right direction..I have learnt alot from this site over the last while but there's a lot more to learn i think. Questions Questions, I know but thanks for the help.Jonah1000 (novice)

Answer:How do you....Format a hard disk..move partition ?

Main reasons for partitioning your hard drive is so you can keep data/music/photos/video editing apart from your os ,then if your os goes haywire you can reformat and reinstal it and all your data will be safe.Many also have their programs/swap file on a seperate partion as well.If you are starting from scratch you can use fdisk to partition and format/with WinXP you can do it as part of the os installation.To alter or remove partitions without losing data you would have to use a 3rd party software utility [like Partition Magic] to achieve this

2 more replies
Relevance 93.09%

Someone installed a linux OS on this guy's Acer Aspire laptop, he wants me to load win7 but when I get the install windows screen, it is showing "Windows cannot be installed to this hard Disk space, Windows must be installed to a partition formatted as NTFS.
I searched the net but can't find instructions on how to do this from the win7 disk?

Answer:How to format Hard disk to NTFS with win7 disk?

When you get to this window install screen and select Custom Install, select Advanced disk options at the next screen. Delete all partitions and then press next. This will automatically make Windows partition and format the drive.

12 more replies
Relevance 92.8%

I installed Partition Commander 9 which automatically installed System Commander as well. The next time I resarted my system the MOBO boot virus scan (Trend Micro) detected a boot virus. I assumed that this was from the System Commander install, and proceeded to boot Windows. Now my primary HDD ( 40GB IDE) shows up fine, but Windows will not recognize my other HDDs (40GB IDE and 120GB SATA). It says the partition is in RAW format.

I don't think that the drives have actually been reformatted, because PC 9 wouldn't have had time to reformat them. I'm not sure what my next step is. I cannot remove PC 9 for some reason, so I am considering reinstalling WinXP. This seems a little drastic.

Please Let me know if you have any ideas, or know of a similar problem.

Thanks
Jim

AMD Athlon XP 2200
1 GB RAM
ATI AIW 9600 128
ASUS A7N8X Deluxe
WIN XP
 

More replies
Relevance 92.22%

I was playing EVE, and an error popped up saying that I should backup my data and replace my hard disk, yet I hear no signs of hard disk failure, and the disk management says that the disk is healthy. MegaDan5 thinks I might have a virus. Should I still make a backup just in case, though?
 
I forget the exact words of the message, but here's a paraphrased transcript:
 
"Hard disk failure imminent. Backup your data and replace the hard disk"

Answer:Hard disk failure error, yet disk is healthy

Can you post a screenshot?

11 more replies
Relevance 91.93%

Hi to all seven forums.
I bought a new 1tb hard disk, and I connected it to my pc as slave, and when I creating the partition in windows seven disk management and right click to creates new partition, it had four option.
1. simple volume
2. spanned volume
3. stripped volume
4. mirrored volume.
plz tell me quickly which option will I click for creating partition..
I want this partitions..
C: 30gb
D:30gb
and the remaining space is equally divided to 3 partition..
plz hurry guys..
I m waiting and stick on this..

Answer:Need quick help about new hard disk partition on win 7 disk management

Can you post a screen shot of Disk management?
http://www.sevenforums.com/tutorials...en-forums.html

Screenshot tools.
A Preferred Method of Uploading/Posting Screen Shots
How to Use the Snipping Tool in Vista - Vista Forums
Snipping Tool - Windows 7 features - Microsoft Windows
Use Snipping Tool to capture screen shots
Screenshot with Paint
Screenshot and Upload using MWSnap
fscapture free download

Use Snipping Tool to capture screen shots

9 more replies
Relevance 90.48%

Hi all, I was watching TV then switched the monitor back to PC which had been running OK. Just got a totally blank screen as if the monitor switched off. Rebooted the PC and got something like this, Imminent hard drive failure Disk 0 PATA #251 F10 run DPS self test. Test 1 said OK, test 2 would not start. Rebooted as normal.
Message may seem obvious but not something I have seen before. I have a backup so no real problem if it fails apart from replacing the drive. Should I just ignore it?

Answer:Imminent hard disk failure disk 0

Looks like this warning is comming from an older HP/Compaq utility details here
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpb11736
But whatever external drives are resonably priced and there are freeware drive backup programs a plenty, to provide you insurance against drive failure
Cheers HC

10 more replies
Relevance 90.19%

Hi, I recently bought a Lenovo G450 - 2949CGU, with 320GB hard disk. When I received the laptop I say complete 320GB is of one drive, I need to partition harddisk. Please help me out in doing that. Thanks in Advance,Nagesh.

Answer:How to partition the hard disk without formatting the disk

after this process,one key recover button ( novo button ) won't work.

7 more replies
Relevance 89.61%

Hi everyone,

Recently my computer started to smell funny, so i opened the case and the grpahics card had burnt and a bit of the motherboard. My computer wouldn't boot, so i replaced both of them with an 8800 GTX, Gigabyte ga-g33-ds2r (mATX). Good news was, my PC would boot and post, But the message Hard Disk Boot Failure Insert System Disk Press Enter came up. So, i checked everything in the BIOS (AHCI mdoe etc) and tried other settings to no avail, also the BIOS doesn't detect my HDD. So i tried connecting in different ports and different SATA cables. My OS was Vista 32bit premium, so i tried putting the CD in, but the Vista repair option doesnt see my HDD either.

Hope this i enough info.... Help please!!

P.S. HDD is definately working. But not being recognised.

Also is there a way to retrieve data from the HDD?

Cheers!!
 

Answer:Hard Disk Boot failure... rather odd.

Are the power and ide cables secure in the back of the hard drive ? Does the drive make any sign of being on ? Is any of the wiring dameged ? For example wire over the fan is prone to being sliced. Is the power supply unit supplying power to the hard drive ? Can you try another hard drive ?
 

2 more replies
Relevance 89.61%

Hi,

Not to long ago I tried to boot my computer and it displayed the infamous "INSERT SYSTEM DISK AND PRESS ENTER" error. When I insert a hard drive that I know works and set it as the Master, and the non-working hard drive as Slave, then boot, the hard drive is accessible in Windows Explorer. All of my files are still in the same condition as they were before the hard drive failed. I tried using the Recovery Console on a Windows XP OEM disk to repair the Master Boot Record in case that was the problem, it wouldn't accept my administrator password. When I used the Ultimate Boot CD 4 Windows, I repaired the MBR (or at least UBCD4Win did), and the hard drive was still not bootable. The hard drive doesn't make any strange sounds at all. I could not find any helpful advice on HP Support, and I tried unplugging each device one-by-one until it booted.

My system specs:

Compaq Presario 6320US
AMD Athlon XP processor 2000+ operating at 1.67GHz
256MB DDR SDRAM Memory
60GB Ultra DMA Hard Drive
Integrated ProSavageDDR KM266 graphics with 32MB shared video memory
Microsoft Windows XP Home Edition SP2
 

More replies
Relevance 89.61%

I got a new pc with no hdd so i took my old harddrive put it in my new one and its now says "disk boot failure insert system disk". can anybody help?

Answer:Hard disk boot failure

Hi and welcome to TSF

The new PC does not recognize the old HD operating system. The olde HD was set up for your old PC.

Need to reload the operating system.

BG

4 more replies
Relevance 89.61%

I have a computer running Windows 98 and I had just installed Nero Burning Software, it told me to reboot... so i chose yes reboot now.
When it powers back up, it doesn't boot up and I get the error "Hard Disk Failure" or somethin of that sort, then it says "press f1 to continue or DEL to enter setup".. if i press DEL it goes into BIOS stuff, when i press F1 it says "HARD DISK BOOT FAILURE, PLEASE INSERT SYSTEM DISK AND PRESS ENTER" ... anyone know if it could be something repairable? or does this mean my hard drive is completely gone? =[
 

Answer:Hard Disk Boot Failure

7 more replies
Relevance 89.61%

I have an intermittent problem when sometimes my PC does not boot up when I turn it on. It appears it is looking for and not always finding the "IDE drive" and returns an error message "Master boot failure".When I try again it usually works but not always.I'm at a bit of a loss as I've not done anything to the PC except some weeks ago a new network card was installed to allow me to go "broadband".Should I look for a loose wire?Jem

Answer:Hard Disk Boot failure

or a new hard disk...sounds like it's on it's way...

7 more replies
Relevance 89.61%

My computer was crashing frequently whenever running video games and I figured it was from the video card overheating so I opened the case took the card out blasted the whole thing with compressed air and the video card as well and then put the card back in, nothing else was dissconected. When I turned the power back on I got the error "Hard disk boot failure, please enter the boot disk and then press enter" so I put in the boot disk and it said "Windows cannot detect the hard disk, it may be dissconected" and then I looked inside my case again and there is a thin red cord I didnt notice before that was hooked up to the hard drive but not to the motherboard, it is the SATA/RAID cord but I don't use that configuration, does anyone have any clue what might have gone wrong?

Answer:Hard Disk Boot Failure

Have you checked the other connections for that hard drive.

2 more replies
Relevance 89.32%

Hi,
my hp dv6443 laptop harddrive was erased by killdisk to get rid of scripts or whatever was causing the sluggish performance. The windows version was Vista home. When trying to reboot from the original disk recovery cd to get the maching working again, the err2err3 displayed at start up. I have read about creating a bootable cd with partition recovery, but have been unable to figure out how to create one. I can drop the free partition builder programs onto a cd, but I don't know how to make it "bootable". But I may be going down the wrong path. Any ideas? Is this problem fixable, or should I just throw the computer away. Thanks!
 

More replies
Relevance 89.32%

I have a windows 8 computer that I plan to give away and I don't want my
data to be recoverable so I have considered DBAN, and decided to go
another direction, I have just been wondering if I format the hard drive
through another computer via a hard drive reader, will I be able to reinstall
windows through a disk because I promised that to my buyer?

Answer:Can I format my hard drive and boot from a disk after?

Yes

1 more replies
Relevance 89.32%

I needed to format my hard drive and write '0' on it but I don't have it anymore. The last time I formatted my HD was years ago and have lost track of my boot disks. Basically I need a CD or a single floppy disk that I can boot from and simply format the hard drive. Any help would be appreciated.

Answer:Boot disk to format hard drive

www.bootdisk.com

7 more replies
Relevance 89.32%

I am a new player here, so excuse me if i make a mess of this. I have a Sony Vaiol laptop and am  running vista.  I haven't used it for a lot other than internet, so data etc.is limited and space is good.my problem started suddenly when i turned on pc and a black screen with the error message,"disk read error, press cntrl+alt+del to continuie."didnt do it! Wouldnt do anyuthing.Finally, I acquired legal sony recovery disks. And when the screen to choose operating system comes up, there is none so it says apply drivers and im lost, I have no familiarity with hard disk drivers so....but did bring up command prompt in recovery and through luck and lil else, i happened on chkdsk and found it to all check out but it does say NTFS not fat 32, but found no problems. Now Im dumb completely!!! Help if you can.

Answer:hard disk`??? wont reboot even with recovery disk yet all disk checks say fine.

Sony Vaiol laptop.Has problems of its own. It is not piratical to give you guidelines on this laptop. There have been many issues about how to repair and maintain it. The recovery discs should have everything you need.Here is a bit of advice, not really my own, try to sell the unit to somebody that thinks they know how to fix it. Then go buy a new or used laptop that will suit hour needs.The cost of ownership of any laptop is higher that many new users expect. Some more than others.This  may sound like a rant to put down Sony. It is not. Sony has made their own bed of nails. Look at this article from last year:Sony Vaio Laptop Recall: Everything You Need To KnowRead the article. You decide.

4 more replies
Relevance 88.45%

I have had in recent months on bootup, a dialogue box indicating "Disk boot failure Insert system disc". When this first happened I was able to reboot OK but then the frequency that this came up increased, such that in the end it would not boot up at all. I then installed a somewhat old hard disc and after a week or so the same dialogue box came up.I then replaced the hard disc with another spare and after a few weeks the same thing happened with that hard disc. I purchased a brand new unused disc and for the past two months it has worked perfectly, then this morning the "Disk boot failure..." came up. I rebooted OK.Question what else can give rise to the message other than the hard disc failing? It is hard to believe that so many hard discs are at fault.

Answer:Disk boot failure - I find it hard to believe

Obviously it is not the hard drives that are faulty. There are a number of other reasons for this message though. Run chkdsk on the drive. It could also be a BIOS problem. It may be looking for the wrong disk at startup. If your motherboard is older try changing the battery(CR2032). Have you reset your CMOS and loaded BIOS defaults after changing hard drives?

10 more replies
Relevance 88.45%

I've tried a lot of things over the last few days to no avail, hoping to gain the help of someone with exceptional computer knowledge, baring in mind I'm not that savvy with OS.

Had a virus (antivir pro solution) managed to delete that, which lowered my boot time dramatically albeit still operating slow. It hangs at the Bios screen for a good 5mins then after the microsoft window loading bar, it'll take another 20+mins to get to the user accounts screen. Once signed into my account, windows explorer I think it is doesn't load up for a good 20mins+ (start button, desktop programs, toolbar)

A point to note is that the window for task manager crashes when I attempt to open 'my computer' although every other folder doesn't.

The f*** is going on? lol.
 

Answer:Hard disk failure? 45 minutes+ to boot up!

Honestly off-hand it does sound like a failing hard disk (although you could still have some malware in there). Can you run chkdsk on the drive? (Right click the hard drive C: in Windows Explorer, Properties, Tools tab, Check Now button, both options, rebootski )

See how that turns out.
 

3 more replies
Relevance 88.45%

Hi, my friend is having problems with her computer. It is a Windows XP Professional. This is the situation.

My friend has another computer who's onboard video card wasn't working and she really wanted to get into the computer to save the documents she had created. This works on Windows 98. Since the onboard video card is damaged, and installing a new video card didn't work, she decided to try and take out the hard drive and install it onto her newer computer which carries Windows XP Professional.

She switched the drives, unplugged the connection from the drive in her new computer and hooked up the older drive with all her documents.

She gets a boot disk failure and tries to fix it with a bootable disk for Windows 98 since her old drive carries Windows 98. Either way, it didn't work, so she re-plugged her drive from the Windows XP computer back into it's connector and tries to reboot.

She gets the same message for this drive and thinks she might have messed up the computer by switching drives back and forth.

So basically, after switching back, she gets the same boot disk failure, insert boot disk. Please let me know how she can fix this, so she can go back into her Windows XP computer. Thank you.

Camila
 

Answer:Hard Drive and Boot Disk Failure

With the XP Hardrive do the following.

1. Turn on the computer and put in your Windows XP Disc
2. When it show "Boot from cd." on your screen press "enter" on your keyboard
3. Then let the computer do its on thing, it loads of bunch of things.
4. When that finished press "R" to enter the Recovery Console.
5. Once there it will ask for password...
6. Now a command prompt should be available. I.E. "C:\WINDOWS\"
7. Type "FIXMBR" then press enter
8. Type "FIXBOOT" then press enter
9. Type "EXIT" then press enter

Now your computer will be rebooting and should hopefully load your Windows XP
 

2 more replies
Relevance 88.45%

Well....I guess we will see if anybody in the Forums has a solution. This is a complicated lengthy explanation so bare with me.

1) My wonderful son borrowed my wife's brand new Windows 7 laptop as his was on the blink. After discovering that her laptop was not very fast he chose to remove the hard drive and install it in his laptop. (KEY NOTE: yes, the nice fella neglected to make a Recovery Disk prior to doing this.) He then reformatted the drive and installed his version of Windows 7.

2) Then he purchased himself a new i7 laptop at Christmas. At that point he decided to give mom's laptop back to her. He took the hard drive back out of his old machine and installed it back into mom's laptop. At that point he did nothing with respect to starting it to ensure that it worked.

3) Now I am stuck with a laptop that won't boot up as the computer obviously doesn't recognize the hard drive due to the Windows 7 install from the son's computer.

I've tried repairs, recovery, safe mode boots....and anything else that comes to mind but to no avail. I would like to get to a command prompt so that I can format (fdisk) the hard drive and try and start from scratch. I have found no help to date that allows me to do that either.

Your assistance would be much appreciated.

Answer:No recovery disk.....How to boot to dos to format hard drive

Do you have a Win 7 install disk? If you use an install disk to boot from, you will be able to partition and format the disk as part of the install process.

Another option would be to download one of the many Linux distros which would partition/format the disk as part of it's installation.

9 more replies
Relevance 88.16%

Hi everybody
Recently i had to repair Southbridge on my laptop by a technician but after that, My laptop is unable to boot from nothing but HDD. despite changing all available settings on mobo(enabling boot from CD/DVD,USB HDD and etc) seems that none of them are being enabled.Is there any possible solution?
My Laptop Specs are as follows
Acer Spire 5738G
OS: Win7 professional 64bit
HDD: 320GB SATA
Memory: two 4GB modules
ATI Mobility Radeon HD 4570 Graphics
CPU: Intel Core 2 Duo T6600 (2.2GHz, 800 MHz FSB)

More replies
Relevance 88.16%

Please help
I have a problem with my Compaq PC ...will explain from beginning !!
At first when i boot the PC it used to come one message like " splash screen error run rompaq.." and below that black screen F1 to boot....when i press F1 ...it used to boot windows and i can work comfortably ..now the problem...before last two days when i tried to start my PC it won't boot ..instead it shows the same message press F1 to boot (i suspect by mistake i deleted some system file..but it was a normal shutdown i made last time)...after that i made one start up disk from another computer and tried to boot from it ..but i can't ..while booting from floppy it begins the booting but windows not coming..it shows like
Starting......
A:\> mode can code page prepare=((720) ega4.cpi)
failure to access code page font file
A:\> mode con code page select =720 code page not prepared
A:\> keyb us,, keyboard.sys
code page specified has not been prepared
A:\>
I can enter to C:\ or D:\ etc also can use dir like commands..please help me to solve this problem
 

Answer:Windows Xp Can Not Boot Both From Hard Disk And Start Up Disk

You have some serious troubles, and need to do some intensive reading on how Windows works, and what happens when a hard drive is corrupted or damaged or mis-installed..
It would be helpful for you to tell us computer, install discs, installed hardware, connection, hardware configuration you have, as well as the age of everything, and the recent history of failures and difficulties..
 

7 more replies
Relevance 88.16%

I bought a f500 series Compaq laptop... ok, It's originally with VISTA but the previous owner installed Windows 7 Ultimate in it. Runs ok and everything but I want my lappy to be in its original state. OK... here's the problem I spent HOURS and hours trying to solve without success...
I can't boot my Laptop from USB, CD-ROM, USB FLASH DRIVE nor External disk drive. I checked BIOS. I set the boot order like I'm supposed to, DISK > USB > HDD. Nothing happens.
I hit f10 for BIOS setup... or ESC for Boot order and I only see Hard Drive as boot option. No CD, USB... I tried to "repair computer" (F8) and I get no repair option, only restore option with restore points.
I have use Partition manager to check partitions. I am unable to install RECOVERY MANAGER. I get missing "HardDisk.dll" or when I install hdd.dll, I get error code that Recovery Manager is unable to run.
I have recovery Disks for both VISTA X 64 and WIN 7 X 64 and both are no use since I can't access those.

I tried to upgrade my BIOS F1.71 >>> Running the BIOS upgrade software I got from HP official site... I get to the point where the Software tells me it is creating a FLASH BIOS and I get immediately the blue screen with "memory dump" message. This happens every time I try to upgrade.

I'm not too knowledgeable in computers but I can troubleshoot easily with good instructions... I've tried everything and I come across with a problem after a problem. It's so frustrat... Read more

Answer:Unable to boot my laptop from DISK, USB, ANYTHING but Hard [email protected]#%

There has to be a setting in the BIOS that is stopping you from booting from the USB or CD/DVD drive. That is IF those to thing actually work.

Have you checked to see if the USB and CD/DVD drive work?

As to the memory dump when trying to update the BIOS. You are doing this from inside Windows? I would suspect that because of the memory dump error.

99% of the time the computer/OS BSODs from memory errors. Memory errors come from bad memory.
If the notebook has 2 sticks of memory remove one of them then try the BIOS update. If it still BSODs put that stick back in and remove the other.
If it still BSODs then try it from a Safe Mode boot or from a Command line boot.

9 more replies
Relevance 87.58%

I have been getting a hard disk failure message on my Sony Vaio windows 7 laptop since past few days. So today I took a backup and decided to revert to factory settings.
While doing that my laptop suddenly shut down and when I tried to restart it, the error message comes

BOOTMANAGER MISSING
Ctrl+Alt+DEl to restart.

And when i try to restart the same msg comes.

I dont have any windows 7 installation cd as windows 7 came installed in this laptop.

Please help

Answer:Hard Disk Failure & Boot Manager Missing

Quote:




I have been getting a hard disk failure message




A hard disk failure message means, well, that the Hard Disk Drive has failed. Trying to reinstall on a failed HDD will also end in failure. You need to contact your computer manufacturer and see if they have a recovery CD you can get, or get a Retail DVD of Windows 7 or 8 as well as get a new HDD to replace the failed one.

1 more replies
Relevance 87.58%

I have 2 problems at start-up: 1.Scan disk running at start-up but no errors found, "because Windows was not properly shut down etc. etc...." even when it is. 2.Also, my hard disk is making an awful scratching or rasping noise on boot-up and freezing mid-boot which requires me to reset 2-3 times in order to boot -up. I am worried about this - could it be impending hard disk failure ???The last time this happened I got the message: "Your program caused a divide overflow error". Any ideas? I did run a trial version of McAfee virus scan recently which found and deleted a virus in my autoexec.bat but I am wondering if it did any lasting damage? Grateful for any help.

Answer:Rasping noise on boot-up - hard disk failure ?

How olds the drive? It is displaying very similar symptons to my dad's which failed last year

4 more replies
Relevance 87.58%

HP Pavillion DV7 with Vista. Got an imminent hard disk error (no back up and no Vista Recovery disks) probably from power outages. Ran chkdsk (yes, I should have backed up or cloned first) it was fixing errors and in stage 4 when the power went out. Now it will not boot, gives SMART error 1720.

I tried to make a boot disk with my old XP computer online, using Imgbrn and tried burning WD's hard disk rescue and UBCD411. My laptop will not boot off of any of them, even with the Bios changed to boot off CD (yes I saved Bios correctly). It actually won't read the CD/DVD even though I input it into the bios. It just keeps saying insert boot disc and hit any key.

The hard disk is partitioned into C and D and D is the recovery. Any way to access the hard disk or get this to boot?? Thanks in advance!!
 

Answer:Hard disk failure, Vista unable to boot at all!!

7 more replies
Relevance 87.58%

Hey,
I recently had a serious malfunction with my computer. My power supply fan decided to stop working. I didn't realize it until too late. My computers power supply got really really hot and shot some sparks out the back. I smelt some burning scents and found them coming from my power supply. After this I switched my computer into a new case with a new power supply to find out that this had actually killed my motherboard as well. I then borrowed my brother's motherboard and connected my hard drive to it. I've got everything hooked up correctly and am getting it to boot up to bios. When it gets to the point where it verifies DMI pool data it gets a disk boot failure. I've read in a couple of places that this is often a result of a corrupt hard drive. Is there any way I can check and see if the hard drive is still ok, or is the information on it completely lost to me? I'm currently in the process of buying a new laptop and would like to get the information of that computer if it is at all possible. I've tried all the system defaults for boot order and have tried various combonations that make sense to me but none have had any success. Any help is much appreciated.
 

Answer:Hard Drive Problem...disk boot failure

Set it to boot from CD. Find a boot disk with some HDD diagnostics on.
 

4 more replies
Relevance 87.58%

Hi,

I have a Vaio pentium 4 desktop computer with a 60 gig hard drive, 2.4 ghz processor and 512 RAM. When I boot up, I receive a warning that says "hard drive failure imminent, back up all data" and I have to press F1 to continue the boot up process. After that, the computer runs, a bit slower than it should, but with no further error messages. What could be the problem? Thanks so much!
 

Answer:Need help with boot up hard disk failure imminent message

Smart drive is detecting that the drive is failing.. plain and simple..replace the drive and make sure you backup your data before hand. If your machine is under warranty, contact your manufacturer for warranty replacement information. If not, then we can help you find a drive if you need.
 

1 more replies
Relevance 87.58%

Hi everyone.

I have an HP Pavillion m9500y with Vista 64bit. I got the hard drive failure imminent message, so I backed up my data, installed a new drive, ran disk clone through the bootable media disk I created with Acronis True Image 2012. The clone said it was successful.

I looked at the new drive through the True Image backup files to see if it cloned ok and it looks fine. The partitions are there and all the data seems to be there.

So, I disconnected my old drive (Seagate Barracuda 750gb) and have the new drive(Seagate Barracuda 3tb) in the primary position. Now it says "boot failure..please insert system disk." I ran the short self-test through bios and it passed.

I, then, tried using the HP recovery disks and it says "Non-system disk or disk error." They aren't faulty because I used them to recover my old drive before cloning and it worked properly.

This is the very short story of what I have been doing for the past few days and I am at a loss now. No clue what to do next.

Any help is greatly appreciated. Thank you in advance.

Answer:Boot disk failure after installing new hard drive

Reboot or turn on the machine. As soon as you see your machine's name logo splash screen keep tapping F8. Go to "Advanced Options" or "Repair Computer" Select your language then "Repair Your Computer" An installation of Windows should be detected after that select "Next"

If that does not fix the issue. Do the same as before go to Next again go to command prompt type in

Code:

CHKDSK C: /R

If that does not also fix the issue follow the same steps as above except go to command prompt and type in then hit enter after each one.


Code:
bootrec.exe /fixboot
bootrec.exe /fixmbr

2 more replies
Relevance 87.29%

I've upgraded my X220 with an 80GB mSATA SSD, and initialized the mSATA SSD from Recovery Media, which leaves me with Recovery Partitions on both the SSD (new boot/system drive) and the hard disk (now data drive). Is there a way to point the blue ThinkVantage button to the Recovery Partition on the hard disk so I can free the space occupied by the Recovery Partition on the SSD without losing its functionality? Thanks!





Hope that helps,JohnThinkPad T420s [ i7-2640M | 16GB | 1TB SSD | 1600x900 | 802.11n | BT | Cam | FR | Win8.1Pro64 ]









Solved!

Go to Solution.

Answer:Boot from mSATA SSD with Recovery Partition on hard disk

I would be very interested to see the answer to this as well.

8 more replies
Relevance 87.29%

Hi everyone, I just created dual boot with both Windows 7 home edition and Windows 7 Professional 64-bit. Both windows also original license. I want to use another Windows 7 for testing purpose, but I don`t want to use virtual machine. After I installed the Windows 7 Professional, I able to see another partition windows 7 from My Computer. Is there any way to hide another partition from My Computer or disallow to access to it? If one of my Windows 7 got virus will it affect to another Windows 7 as it can access to another Windows partition?

Answer:Dual Boot both windows 7 in same hard disk different partition

Can you post a screen shot of Disk management?

Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 86.71%

Hello,

After looking through my post, I realized its very long-winded but I was trying to be detailed. There's a short version at the bottom if you're looking for my question.

I recently reformatted one of my two hard drives, which previously contained a Windows XP install and a Vista Ultimate install and now I am getting a Boot Disk Failure. Windows XP was on an 400 GB IDE hard drive (Disk 0), and Vista was on a 500 GB SATA drive (Disk 1). I did the reformat in Windows Vista, in the Computer Management screen. After it finished, I restarted my computer and received the error "BOOTMGR is missing, press Ctrl Alt Delete to restart." From what I understand after looking into this, when I installed Vista onto Disk 1, it put the Boot manager on Disk 0 instead of Disk 1, so when I reformatted Disk 0 the Boot Manager was gone. I pulled out my Vista CD and tried to use the Repair installation option but it didn't even detect a drive with an operating system on it to repair. I also tried used the CMD prompt in the repair section, using the bootrec.exe command, to repair it but that did not work either. It also did not detect my second drive (designated as F:) but only the empty C: drive (the newly reformatted disk 0) with no operating system on it. I decided to try to install Vista onto my IDE drive (disk 0). I completed the install and now had a working operating system on Disk 0, but now I started getting the "Boot Disk Failure" error message on startup. I trie... Read more

Answer:Disk Boot Failure after reformat of drive 0 (2 hard drives)

I think I would boot into the "working" Vista install and download and install EasyBCD. This is a GUI program that will edit the bootloader for Windows Vista and allow you to add or remove the installs of Windows that you want in your boot menu.I have used this to regain entry into a Vista install after a partition resize and install of Windows XP on a laptop. As long as you can find the installation, you can add it to the boot menu. If your bootloader is damaged or your Master boot record is damaged the newest EasyBCD can replace those also.EasyBCD is located here: http://neosmart.net/dl.php?id=1I would also recommend reading the documentation located here: http://neosmart.net/wiki/display/EBCD/Easy...0A9333360854E7AGood Luck,

1 more replies
Relevance 86.71%

Our computer is giving the message "hard-disk drive failure press f1"  but it just keeps repeating that message when I press f1. 
I have run the ePSA Pre-boot system assessment.  It gives a green check to all devices listed on the left but lists n/a for hard drive.  But at end of test it tells me everything is ok.  
Does this mean my hard drive is shot?  Any suggestions?

Answer:hard-disk drive failure - pre-boot assessment results

Does the system see the hard drive at all? It sounds like the answer is no (F2 at powerup to check).  If that's the case, then yes -- the drive is shot.

5 more replies
Relevance 86.71%

Can someone please tell me why if I remove my second HDD , the system won't POST???

Drive has nothing on it ( I've even reformatted it to make sure )

It's a Quantum 20GB connected as primary slave ( E: )
Primary master is WD 80GB with two partitions ( C: & D: )

Secondary master is CDRW
No secondary slave

System runs fine & everything works flawlessly , including the HDD I want to remove so I can use it in another PC.

I've set primary slave to NONE in the BIOS ( which is the latest version ) , but it still won't POST without the HDD connected.

Gets to DETECTING IDE DRIVES... thinks for a while ,
detects drives correctly
thinks for a while , VERIFYING DMI POOL DATA ,
thinks for a while and then DISK BOOT FAILURE , INSERT SYSTEM DISK & PRESS ENTER

BIOS boot sequence is HDD0 , FDD

Reconnect drive & reboot - everything back to normal again!
Maybe it just doesn't want to leave!
Running WinME , Epox 8k3a , XP1800 , 256MB DDR2100
 

Answer:[SOLVED] Second Hard disk removal causing boot failure

8 more replies
Relevance 86.71%

Hi, recently my PC was working fine but suddenly i got boot problem like "a device is not connected" and later on "BCD boot file configuration not valid". After a lot of fuss, i downloaded Macrium Reflect USB with WinPE 10. I first used Rufus with NTFS file format to create the bootable Macrium Reflect USB but when booted, Marcium reflect neither found an operating system nor showing any hard disk in the computer, although hard disk is showing in the BIOS. Later on I googled and found that I should make a bootable USB using Fat32 file system since I have UEFI BIOS. So i did that using Rufus again and still Macrium Reflect shows nothing. I dont want to install windows again, but want to restore/fixboot to the previous working condition. Any help would be appreciated.

Thanks.

PC Configuration:
Intel Core i5 Skylake
Gigabyte H110 S2PH
Kingston 8GB Hyper X
1 TB SATA WD Black
Windows 10 Pro

More replies
Relevance 86.71%

I was replacing a secondary hard drive on a friend's aging desktop that has PATA drives, running Windows XP Home SP3. After I replaced the old secondary hard drive with a newer one that I've freshly formatted as NTFS (it came from my own desktop so I know it works and I did a quick read/write test on it after formatting), I left the primary hard drive with the Windows XP installation untouched. However, when I attempted to boot up with this new configuration I got a "DISK BOOT FAILURE" even though BIOS recognises the two hard drives.

I booted up with an Ubuntu live CD and both the drives were readable, writable and seemed all fine.

Disconnecting the second hard drive and leaving in just the primary hard drive, I was able to get to the Windows XP start up animation. After which I shut it down. I reconnected the second hard drive, put in a Windows XP recovery CD - it took way too long to start and when it did it gave me the message: "Setup either detected multiple disks in your machine that are indistinguishable or detedted raw disk(s). Setup had corrected the problem, but a reboot is required."

After this, any attempt to run the recovery CD with the two disks connected is extremely slow and then gives me a repeat of this "indistinguishable" nonsense. The single primary drive by itself gives me a "DISK BOOT FAILURE". And when running recovery console with the single hard drive connected, it starts up faster but it won't let me do... Read more

Answer:[SOLVED] Disk boot failure when replacing second hard drive

Did you check the jumpers? Sounds like you have them both set to master.

"I was able to get to the Windows XP start up animation. After which I shut it down"
Never do that. You "crash" the system and this will result in chkdsk errors

2 more replies
Relevance 86.71%

Today when I started up my computer it would not start up.

It will always give the error. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I open the bios and it reads neither my SATA 500GB seagate hard drive or my IDE DVD Drive. I'm pretty sure my hard drive is not dead because the computer was custom built about 6 months ago and the harddrive is pretty new.

The only thing that was done before the computer stopped working was my friend tried to put in his external hard drive (no idea what kind) and it wouldn't install via plug n play so we gave up. Could his external really have messed my bios and/or hard drive up?

Main thing I did to try and fix this was remove the CMOS battery to reset the bios but that didnt help either.
Specs for my computer are.

Core Duo Processor 2.66GHz, 6AMB L2 Cache, 1333 MHz

4gb of ram

Gigabyte GA-EG31M-S2 Motherboard.
PLZ help
 

Answer:Bios won't read Hard Drive. DISK BOOT FAILURE.

12 more replies
Relevance 86.42%

Only when plugged in and running, the lapop shuts down.  On reboot, Boot Disk Not Found  Hard Disk (3F0) Never happens on battery only. Today, I Performed a hard reset and Restored BIOS default settings.   Tested the hard drive using HP PC Hardware Diagnostics UEFI. Also ran HP PC Hardware Diagnostics UEFI on power supply, system board, and memory.  No problems found.   Happened again tonight. Heat? 

More replies
Relevance 86.13%

Hard disk type : Seagate SATA.
Model Number : ST3160215AS
Serial Number : 6RA1J7H0
Firmware Revision : 3.AAD

OS : XP SP3
Mother Borad : Intel 945 GCCR

My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk going to fail? If yes, how to transfer my data to a new hard disk easily?

Complete description of the issue :

1.I have experienced boot up issue with my PC 2 days back. My PC not even boot into safe mode also.I got the following blue screen errors on successive restart of PC .

A. 0x00000050 ( 0xC374037F, 0x00000000, 0x804FBA19, 0X00000000 )
B. STOP : C0000135 ( Unable to locate component )
c. 0x0000007E ( 0XC0000006, 0X80698C12, 0XF79896E4, 0XF79893E0 )

2. I have removed and replaced the hard disk ( several times ). I can boot into windows now and can work normally, But,one of the above Blue sreen errors is coming all of sudden while working on PC. It is happening independent of the application I am using.

3. And the following messages are coming at the XP welcome screen and while working on the PC.

A.C:\windows\system32\drivers\etc\netloc.wlt has corrupted and unreadable. Perform CKDSK.
B.C:\windows\system32\drivers\etc\APPFCONT.DAT has corrupted and unreadable. Perform CKDSK.
C.C:\windows\system32\drivers\etc\idsflt.cfg.bck has corrupted and unreadable. Perform CKDSK.
D.Cagefile.sys has corrupted and unreadable. Perform CKDSK.

4.I have performed CHKDSK on all local drives exept local drive C. CHKDSK giving a message that " can no... Read more

Answer:My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk g

In a Run box, enter "chkdsk /r"
You'll be asked if you want to run chkdsk at the next reboot. Enter "Y".
Reboot, and be prepared to wait, as it may take a long time.
 

2 more replies
Relevance 86.13%

What do I need to fix this issue?

Answer:Hard Disk Test Failed Hard Disk 1roduct QE24UA#ABA ID: GG8KH...

The hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail  SATA hard drive can be used. I believe this model uses a laptop/mobile hdd.Just be sure to get one of at least equal capacity as the original in order to use Recovery Media to install Windows. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.

3 more replies
Relevance 85.26%

I have a gateway laptop and am having trouble recovering the system to factory settings. When I run the recovery disk, I get the message:
Fail to format disk 0 partition 3
I tried running an AVG bootable CD to diagnose the recovery issues, but the laptop does not run the disk and instead gives the error msg:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart

Can anyone help me with this problem -- many thanks in advance.
 

Answer:Failure to Format Disk 0 Partition 3 on Gateway Recovery

Thanks for the new thread.

So just to be sure you are booting from the recovery discs and not trying to run them in Windows which was the other persons problem?

Does the AVG disc let you see files and folders on the HD? And which version of Windows are you running 32bit or 64bit or give model number of laptop.
 

13 more replies
Relevance 84.97%

  Hi Yikes - I am in deep trouble !Following a virus attack, I have zero-ed my Thinkpad T60's hard disk (using KillDisk), but now when I try to install WindowsXP Pro from a CD, but although it can read the CD and does get so far... it says it cant read the hard disk ! I was hoping to install the correct driver (see below) but now I can't find my floppy disk drive for my T60.Is it possible for DOS to read off a DVD or a CD? I have tried to download a file which I am hoping is the correct driver"Intel Matrix Storage Manager Driver for Windows 7 (32-bit), Vista (32-bit) and XP (32-bit) - ThinkPad"6iim10ww.exe        www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70477But without a floppy drive I dont know how to get it into my T60!Is it possible to put the data onto a CD or a DVD and read from there? Cheers  ShipP.S. My machine is a Lenovo/IMB Thinkpad T60 "2007-F4G" with a 74GB hard disk.http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62928#hdd 

Answer:Can a T60 (with completely zero-ed hard disk) install a hard disk drive from a CD? Or floppy only?

Hi shiphen,
 
please refer to this install instructions.
 
For further guidance check into this thread.

1 more replies
Relevance 84.97%

Hi guys,

I will try to explain this as simple as i can.So let's start
I have laptop ASUS N75SF and it is a year old,so i have decided to format.I have two separate hard disks that are the same brand,SeaGate 9500423 AS, each 500 gb capacity. Before i decided to format , one of my hard disks(that is my partition D) started to make strange noises and it was not recognized,but i was using my laptop without problems because my windows was installed on my other hard disk (that is my partition C).So now my question is this :
After i formatted them both i have no clue which one is which ? they are like :
Disk 0 Partition 1 465 gb
Disk 1 Partition 2 465 gb
So how do i choose the one that is better and not having problems to pust my winodows on?
I know that i can buy new one and replace it with the one that is having problems,but right now i have no money to do that .I am student

Thanks in advance

Answer:Confused about installing Windows on my hard disk,hard disk problem

I'm willing to bet that Disk 1 is the bad hard drive since the bad hard drive was the D: drive.

6 more replies
Relevance 84.97%

okay... i am using pentium d 2.8 with 2gb ddr2 in my pc. my motherboard is ecs p965t-a v1.0b. i have 3 hard disk, one ide interface 80gb which i used for installing my windows vista and programs exclussively. and 2 sata 250 and 160 gb. i was using asus for my video card before with 128 mb memory. and i then i changed it to nvidia geforce 7300 256 mb. fe days after installing my new video card, windows started to boot slowly and sometimes even takes an hour. so i thought the windows was damaged so i tried reinstalling it and it works okay again. but after a few days again it started to boot slowly. so i was thinking that something is wrong with my video card but is not. i noticed that in "computer", my other sata hard disk does not appear.. but sometimes it would appear and dissapear again. sometimes i can open it but sometimes not. so i am getting confused if my hard disk is damaged or not. my hard disk is seagat 7200 rpm. i need your help guys and i hope this will be solved. thanks alot!

Answer:Windows vista not detecting my hard disk or my hard disk is damaged?

Well that paragraph was hard to read...Double check all your connections to the drives.You say you thought there was trouble with the vis card " but it's not "...how did you determine this ? ?Have you checked your system operating temps ? ?

1 more replies
Relevance 84.97%

Helloo..

I got an error on hard disk...

A hard disk devided to two partitions: (C - for OS Win XP Pro) and (D - 2nd partition).
The problem is, when i start the pc (windows was running but immediately restarted automatically - repeated). I take out the hard disk and installed it as a slave drive to other pc for data recovery before repair/format the problem hard disk.

FYI, the 2nd partition can be accessed and read. But the 1st partition of the hard disk (for OS) appeared this error when i try to open it : "THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE". Is anyone can help me to solve this problem?

TQ
 

Answer:Error on Hard Disk : The Hard disk structure is corrupted and unreadable

http://support.microsoft.com/kb/311724
 

1 more replies
Relevance 84.97%

Greetings,
 
I have an Asus laptop running windows 7 64 bit and this laptop came with 2 hard drives, each partitioned into two parts (C:\ & D:\ and E:\ & F:\).
 
I am transferring over 30GB of data from one drive (C:\) to the other (F:\)
 
Get this... the transfer rate is 1.2MB/s right now. Over 9 hours left to copy the 30GB. There are over 125,000 items but that still does not justify the 1.2MB/s
 
I am open to any suggestions but first, a few points.
Yes, I am sure they are two separate drives with those partitions.
Error checking showed zero errors on both drives.
This is the 3rd time I am trying a transfer.
Both drives are relatively empty (especially the F:\).
C:\ is my system disk.
The SMART data shows no read/write errors or overheating.
I have disabled the virus protection and all real-time scanning.
 
Again, I am very open to suggestions and checks. Feel free to post your idea!
 
 
Thanks in advance!

Answer:Laptop Hard Disk to Hard Disk transfer Extremely Slow

My experience with file transfers of the type you describe...is that the number of files doesn't matter...what matters is how large the files are.  Video files take much longer than text or document files.
 
Slow transfer rates between partitions/drives...can indicate a problem with either the partititon or the drive, IMO.
 
Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

2 more replies
Relevance 83.23%

Product # LR656UA#ABA - warranty expired. Ran system test at boot up error message (F2 Hard Disk Test)... Hard disk failed the test. How do i get hard disk replaced A.S.A.P. (i need it "yesterday"!) and how much does it cost?Thanks. Rebecca

More replies
Relevance 83.23%

Product # LR656UA#ABA - warranty expired. Ran system test at boot up error message (F2 Hard Disk Test)... Hard disk failed the test. How do i get hard disk replaced A.S.A.P. (i need it "yesterday"!) and how much does it cost?Thanks. Rebecca

Answer:Hard Disk Failure - what is cost to replace hard drive in 10...

Hi Rebecca, Contact an HP Service Center or a PC or laptop shop and ask them that. This is not a business unit of HP We do not provide prices for HP's services. We are volunteers. If you want to change it out yourself, then that is a different matter.  We can advise you as to what type hard disk or SSD is needed and show how to replace it.  

1 more replies
Relevance 82.65%

Hi i have a self built pentium 4 pc that wont boot.
When i turn it on there is a very long wait at the HP Invent screen (it is a ms 6577 ver 2.1 board) and when it finally gets to the black screen with the slashing dash in the top left hand corner it just flashes for around a minute before saying "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
I have managed to get it to boot once by going into the recovery tool on the XP disk and using "FIXBOOT" but that only worked once and it wont work any more. The specs of the pc are,

PENTIUM 4 1.8GHZ 478
MS 6577 VER 2.1 BOARD
256 MB RAM
20 GB WESTERN DIGITAL HARD DRIVE.

There is nothing to lose on this PC. Thanks in advance. Alex
 

Answer:Solved: Disk Boot Failure. Insert System Disk And Press Enter

16 more replies
Relevance 82.65%

Hi, I left my Pc on standby last night, there were no signs that the computer was broken in any way. I started it up by hitting one of the keyboard keys and it came up with a blue screen of death which I didn't take note of. After I restarted my pc and now it looks like it can't find the OS. I have tried to system restore but it won't let me. And I have also tried choosing a system image backup but it still won't let me. Any help will be highly appreciated.

Thanks,

Kyle

Answer:Disk boot failure on startup, insert system disk and press enter

Hello Kyle!

What kind of boot drive do you have? What model is it? Is there another storage device in your PC?

Start your PC up and check if you see the boot drive in BIOS. If not, power down the PC, open it up change the cables and port, start up again.

Good luck!

CK_WD

9 more replies
Relevance 82.65%

Hi, I've recently tried to install a new HDD (WD Black 1 TB) and a new vid card ATI Radeon HD 3850. When I try to boot and install XP I'm getting the msg Disk Boot Failure, insert system disk and press enter.

Before I was getting "PXE-E53: No Boot Filename Received." However I went into BIOS and disabled the OnChip LAN Controller and I'm now getting "Disk Boot failure, insert system disk and press enter."

When I check in BIOS it seems the HD and my CD Rom are both being detected (They both come up). My initial feeling is that my CDRom is failing, but could it also be that I've gotten a dead HD? If anyone can help me with the Disk Boot Failure problem I'd greatly appreciate it. Thanks.
 

Answer:Solved: Disk Boot Failure, Insert system disk and press enter

6 more replies
Relevance 82.65%

I'm trying to install a PC with Windows 7 threw USB (2.0). Therefore I've used Windows USB/DVD Tool.
To note, I've installed a NEW hard drive, the old one broke down due to it's age.

Now I'm getting the next message: DISK BOOT FAILURE, INSERT SYSTEM DISK.

I've tried setting the boot sequence but none of that helped, I keep getting the same message.

Thanks in advance,

Momkay

Answer:Windows 7 Installation error DISK BOOT FAILURE, INSERT SYSTEM DISK

Normally means that the hard drive is not detected. Check its connections, plugged securely into SATA1 port with no others attached, data and power cable securely attached.

Then enter BIOS setup by tapping the key given for that on the first screen. Is the hard drive registering anywhere there? It often will be represented by its Serial Number.

Reset BIOS to defaults, set SATA controller to AHCI, Save settings and Exit.

Proceed to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

1 more replies
Relevance 82.65%

This is my first build and only problem im having right now is this disk boot failure error..I have a legal copy of vista and trying to install it on a SATA drive and using a DVD/RW to load the CD..I've checked all the connections and everything is seated correctly..went into the BIOS and set my DVD drive to primary and the SATA drive secondary and still no luck..Very frustrated and running out of ideas...Can someone help
 

More replies
Relevance 82.65%

Hiya

Well, as some of you may jnow, this pc has caused me a lot of trouble. So, now its installed witha brand new Motherboard, RAM, AGP card, and hardDrive.

Installed Windows 2000 using the upgrade disk, popping in Win98 to confirm I had it. It all worked okay, but on a restart the error comes up:

Boot from CD: Disk Boot Failure, Insert System Disk and Press Enter

Now, in the BIOS, I've had the boot sequence as all sorts. First, was

CDROM, HDD-0, Floppy

No joy, so went to

HDD-0, CDRom, floppy

then

Floppy, HDD-0, CDROM

Then, for the sheer heck of it

HDD-0, HDD-1, Floppy

Still nothing.

I tried it with Quick Boot disabled, nothing. Seek Floppy is Enabled, was disabled by defalut. HDD S.M.A.R.T is enabled, was disabled by default.

As the pc at home is the only one there, I can only answer via the work's pc during the day. I have my motherboard booklet, and the BIOS is Phoenix AwardBIOS

Any help would be great, so close to marking the threads that I've started on this problem Solved

Thanks in advance

eddie
 

Answer:Solved: Disk Boot Failure, Insert System Disk and Press Enter

16 more replies
Relevance 82.65%

Hi

I have just moved house and my computer has been in storage for 6 months. I've just set up the PC and when I've come to turn the computer on it says "Disk Boot Failure, Insert System Disk and Press Enter". I have a Packard Bell computer with Windows Vista Home Premium installed but wasn't given a System Disk as this was pre-installed onto the computer. I suppose if I could log into the computer I would be able to run some kind of system restore but I can't get past the "Disk Boot Failure" screen.

I've made a recovery CD from the internet but when I've put this in the CD drive and even selected the BIOS setup to go to the CD drive first it doesn't boot the recovery disk.

When I click on F8 when booting it doesn't give me the option of booting from Safe Mode it just shows a list of bootable drives.

Help!!
 

More replies
Relevance 82.65%

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.

I have installed a new hard drive and used three different sata cables none of that worked. I have even taken out the battery and that did not work. I am about to give up and scape the whole thing.
 

Answer:Disk Boot Failure, Insert system Disk and press enter nothing seems to work

It sounds like a motherboard failure to me.
 

6 more replies
Relevance 82.65%

I have just put together an old computer which i had previously been using. It was taken apart, so i reassmbled with a new video card. When I start it and it goes to the second screen checking for IDE primary master etc. It just stops after having ...None after everything, and it just stays there. It doesn't respond to me pressing Delete to enter setup after that. I'm wondering if it could be mechanical or electrical, or both. Thanks
 

Answer:{RESOLVED}Disk boot failure, insert system disk and press enter

14 more replies
Relevance 82.65%

Hi

I have just moved house and my computer has been in storage for 6 months. I've just set up the PC and when I've come to turn the computer on it says "Disk Boot Failure, Insert System Disk and Press Enter". I have a Packard Bell computer with Windows Vista Home Premium installed but wasn't given a System Disk as this was pre-installed onto the computer. I suppose if I could log into the computer I would be able to run some kind of system restore but I can't get past the "Disk Boot Failure" screen.

I've made a recovery CD from the internet but when I've put this in the CD drive and even selected the BIOS setup to go to the CD drive first it doesn't boot the recovery disk.

When I click on F8 when booting it doesn't give me the option of booting from Safe Mode it just shows a list of bootable drives.

Help!!
 

Answer:Disk Boot Failure, Insert System Disk problem - Windows Vista

Two things:

1. Check your cable to your harddrive and from your harddrive to your motherboard and make sure it is securely attached.

2. If that isn't the problem then go into your BIOS and place your CD/DVD drive as First Bootable and see if you can now run that disk you made.
 

1 more replies
Relevance 82.65%

Sometimes, when I am on my computer it restarts and I get this message

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

If I turn my pc off and boot it back up, it works fine. I think the problem may be a virus, but using AVG free 8.0. I have found nothing (2 adware) which I think could cause the problem.

Currently I am running a Kaspersky Online scan. But does anyone know what my problem could be?

Answer:[SOLVED] Disk Boot Failure, Insert System Disk And Press Enter

Quote:





Originally Posted by Greerere


Sometimes, when I am on my computer it restarts and I get this message

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

If I turn my pc off and boot it back up, it works fine. I think the problem may be a virus, but using AVG free 8.0. I have found nothing (2 adware) which I think could cause the problem.

Currently I am running a Kaspersky Online scan. But does anyone know what my problem could be?




the big possiblity is ur hardisk is in trouble.
please use disk utility to check it like deleted reference to illegal software.

16 more replies
Relevance 82.65%

Hello everyone,

We have tried many things to get our computer running, and no luck. We have an older Pentium II 400 MHz computer, and we installed a brand new 500 GB IDE hard drive ( which is recognized at start-up ) and we have Windows XP to install. The computer will not install Windows, and the boot disk the hard drive manufacturer provided will not boot the computer.

We have been working on it for three nights and nothing!

We set the boot in BIOS to boot from CD, and it will not boot with Windows XP, or the hard drive CD that came from Western Digital. We even reset the bios, and took out the battery for over 5 minutes and no luck ( except that it helped the computer to finally recognize the new hard drive - we only have one which is set as the Primary Master. We checked all the cables, and disconected the main cables from behind the hard drive, and the two CD roms and nothing!

Can anyone please help us?
 

Answer:Disk Boot Failure, Insert System Disk and Press Enter - Tried many tips and nothing!

16 more replies
Relevance 82.65%

Does "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" mean that there is no OS installed on the hard drive?

On my other computer it says "No Operating System found".

Thanks.
 

Answer:Solved: Disk boot failure, insert system disk and press enter

11 more replies
Relevance 82.65%

Help. I just built a new computer and I don't know what's going on. I keep getting the error: disk boot failure, insert system disk and press enter

Here's my scoop:
-All new parts: IBM 30GB 7200rpm, P3 800EB, Aopen AX3S pro,128mb ram, 52x standard cd, standard floppy.
-Boot sequence = a,c
-I am trying to use a win98 boot disk (tried 2)
-followed my motherboard's instructions exactly
-CMOS and POST detect everything successfully

Everything checks out. What else is there? Could it be that my hard disk is dead???? A brand new Disk????

Thank you,

Allen

[email protected]
-
 

Answer:{SOLVED}disk boot failure, insert system disk and press enter

14 more replies
Relevance 82.65%

Recently, after unplugging my system from its power source (removing power cable from the power supply) and then later reconnecting the power source, the machine will not boot unless a Vista system disc is in the drive upon boot, mind you, not booting from the disc, just having it in the tray and booting to the OS harddrive. If the disc is not present at startup the machine displays the following error message:

DISK BOOT FAILURE INSERT SYSTEM DISC AND PRESS ENTER TO CONTINUE.

If I insert the disc after this is displayed, the machine hangs and does nothing. If I restart my system after inserting the disc, the machine boots as normal.

Attempted fixes:

bootrec.exe /rebuildbcd, /fixboot

Operations complete successfully but they do not fix the problem. These actions were attempted primarily as a shot in the dark. Typically I have encountered this issue when the molex connector or other cabling is loose on the OS HDD, but that is obviously not the issue, since I am posting this from the machine.

OS is currently installed on an IDE drive, set as master on the primary IDE channel.

Any suggestions would be appreciated to save my the extra step in order to boot.

Answer:Disk Boot Failure Insert System Disk and Press Enter to Continue

bootrec /FixMbr

4 more replies
Relevance 82.65%

When I start my non-brand PC with an MSI mobo I receive the following message:
disk boot failure insert system disk and press enter

At first I thought it was the SATA hard drive but when hooked up to another machine I can see all the files. When I went into the Phoenix/Award Bios all the drives are IDE drives. Not an SATA drive option anywhere. The computer was working great for a number of years. I hooked a brand new SATA drive and the BIOS does not recognize the drive.

What might be the problem and how might I use my hard drive again? Thanks!
 

Answer:Solved: disk boot failure insert system disk and press enter

9 more replies
Relevance 82.65%

i have a 80gb internal hard disk since it was not sufficient i switched up to a 500gb hard disk so i want to know whether i can use my 80gb hard disk as an external hard disk
if so how please instruct me
 

Answer:how to change a internal hard disk to a external hard disk

Is the 80gb drive ide or sata?
 

3 more replies
Relevance 82.65%

Hi all,I recently bought a HP DV6-3299eg laptop and it has started to show up a SMART Hard disk error screen whenever the computer is turned on.  Also, when I'm using the machine it pops up warning messages saying there is a problem with the hard drive and i need to back-up. However, when I run the System Diagnostics Quick and Full Hard Disk tests, they pass 100%. Also, when I run the Start-up test, the Memory test is a 100% pass. And the Primary Hard Disk Self test is 100% passed.  But on both the start-up test screen and the Hard Disk test screen it shows up "SMART check: Hard Disk 1 SMART (301). No warranty code shows up only that SMART check error number. I bought the computer in Vienna, Austria, but am currently in Budapest, Hungary. The chain of stores I bought it from (SATURN) has stores in both countries and so I took it to the Budapest store yesterday to see what they could do.  Through minimal broken English I understood i was to go home and reinstall windows and that would get rid of the problem.  But that is not the case.  I reinstalled windows 7 last night, then upgraded to Windows 7 Ultimate (to get the laptop working in English), and the SMART check error still shows up on start-up.  I've backed up all my files and just waiting to see what happens. I phoned HP support earlier but they're closed as it's Sunday, so I will try again tomorrow. So in the meantime I thought I would post on here and see ... Read more

Answer:SMART hard disk 301...but apparently no hard disk problem?!

Hi, Which OS is installed?Upgrade to the latest BIOS. Here is a link to your notebook's support pages where the drivers and software are.I suggest that you contact HP. Hard drive replacement is covered under the basic one-year warranty.Best regards,erico 

9 more replies
Relevance 82.65%

What is the difference of 3.5 external hard disk (e.g. WD My Book) vs a 3.5 internal hard disk fixed into an enclosure to work like an external hard disk?

Are both good to be use as an external drive to store backup?

What 3.5 enclosure is good?

Thanks

Answer:3.5 external hard disk vs 3.5 internal hard disk with enclosure?

What do you mean fixed into an enclosure to work like an external drive? Are you referring to a My Book 3.0 VIA USB 3.0.... vs.... an internal SATA III SSD or HDD? Be a little more specific.

8 more replies
Relevance 82.65%

My unit is Lenevo 3000 V200My remaining free space on my hard disk is 27.4GB out of 120GBI have few files, Pictures, Music on my computer.I notice every time my computer update and back up it consume more space in my hard disk.I am worried in a few months i will have no more space in my hard disk.  What should i do?Can this be resolve?Can i upgrade my hard disk?

Answer:How to free up hard disk space? or Can i upgrade my hard disk?

The System Restore uses a lot of disk space, if it is in disk C, move it to disk D.Clean up the Temp. files and registry.Defragment your disks.Uninstall unnecessary files.Save your personal files in Disk D. Save downloaded files in Disk D.Do not or install  and uninstall the "Optional" updates. Always perform Disk Cleanup. The above will release some space in Disk C. 

3 more replies
Relevance 82.65%

Hi..im new on this forum and i have a problem with my old hard disk..every time i turn up my pc, windows pop out message ""Windows detected a hard disk problem" ,"Back up your files immediately to prevent information loss". So i decided to replace my old hard disk, but problem is that i have vista preinstalled on my old hard disk. So my question is how can i install vista from my old hard disk into my new one?..please help me and thank u for your reply

Answer:how to install preinstalled vista from the old hard disk into the new hard disk?

hi check out this first http://forums.techguy.org/hardware/7...e-failure.html just in case and if you do need to read this http://en.wikipedia.org/wiki/Disk_cloning

6 more replies
Relevance 82.65%

I am having this Hard Disk problem. My old Hard Disk (Samasung 500GB) (bought in 2010) started showing signs of corruption (like Windows doing chkdsk at every boot, and data getting lost). So I bought a NEW Hard Disk (Western Digital 1TB) last month (Sep 2016) to backup all the data from old one. I didn't have time to backup but wanted to use PC so I Clean Installed Windows 7 64bit on the New Western Digital 1TB and used it about a month without any problems.
 
A couple of days ago i decided to backup up the data. I reformatted the New Western Digital 1TB with Gparted and did a clean Windows 7 Install again. I connected the old Samsung 500GB to the motherboard and started copying the files to the new Western Digital 1TB.
 
Suddenly Windows showed me an error "Windows detected a hard disk problem" which makes sense because the Samsung 500GB is old and might be failing BUT the error is showing both of my Hard disk in the dialog box.
 
Is my new hard disk corrupt as well?
Why is Windows showing my new hard disk as failing?
Can Windows mistakenly show both hard disk in error?
 
Please help i am confused. sorry for a confusing question. i will answer anything required.
 
I have taken the screenshot of the error message, they are in attached files.
1)The 1st Screenshot shows both my Hard disk in the error box (OLD Samsung and NEW Western Digital WD)
2)The 2nd Screenshot shows only one of my Hard disk and its the new one (Western digital WD)

More replies
Relevance 82.65%

HP All-in-One ENVY 20 TouchSmart PC  HP 20-d034 FAILURE ID : 60FQG2-008GM-MFPP0K-60HR03PRODDUCT ID : H3Z72AA#ABA I moved up to windows 10 with the free upgrade.  I received the failure message from Windows and ended up resetting my computer to its original state which was windows 8.  It is now 8.1 and the hard disk problem still pops up. I don't have alot of experience replacing hardware in computers.  Is this an issue I can resolve myself?  Please advise. 

More replies
Relevance 82.65%

have to run master hd as a slave and another hd as a master
What I've done is used old 4 gig Samsung hd and installed XP on it and I can see my master through the 4 gig, i tried chckdsk /r, fixboot c:, fixmbr, tried to upgrade xp through xp disc, yes this is legit xp, but started as pirated one back in 2001 then 2002 paid 139.00 do get a key on the amnesty program and being almost 7 years I've losted key and MS has being giving the run round yea I should kept key on record, and this is my first major issue w/ OS everything has minor issues cause of software issues
I flashed bios to start fresh and see the drive master but can't get past, Please Insert a System Disk and Press Enter maybe y'all can give hand if not thats okay

More replies
Relevance 82.65%

Hey well basically i just download Windows XP SP2 when i had SP1 Orgiinally installed and when i installed SP2 this is when the problem started to occur so i reformated it back to SP1 and now everytime i boot up it always needs the "WINDOWS XP CD" to boot up.

Before it loads to the login place it has a black screen and says

VERYFIY DMI POOL DATA
BOOT FROM CD
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

I press enter without a cd it dosnt load up just keeps asking the question.
then i put my windows xp cd and it loads up to normal i want it to load up from my harddrive like usual its gets real annoying if you need your cd all the time.

I even went to bios and try changing the boot up to hardrive first then CDROM then floppy i even try taking the cdrom bootup off and the problem still occurs .. =/

I CURRENTLY HAVE 2 HARDDRIVES INSTALLED

20GB MASTER - WINDOWS XP IS ON THAT ONE
40GB SLAVE - My Old Data Before i reformated to SP2 THEN BACK TO SP1

HELP WILL BE GREATLY APPREACTIATED THANK YOU =DD

DAVID..
 

More replies
Relevance 82.65%

Just wiped my hard drive clean and am trying to reinstall OS but get a Disk Boot failure, insert system disk and press enter. When i add the cd it just repeats Disk Boot failure, insert system disk and press enter. Have wiped my hard drive before and haven't had this problem. The boot order is correct in the BIOS and i havent touched any cables.

Please could somebody help?

Many many many thanks in advance!
 

Answer:Disk Boot failure, insert system disk and press enter

6 more replies
Relevance 82.65%

home built computer, no OS yet, trying to load Vista home premium and get above message, trying to load from a Super Write master DVD. Maybe I should install a plain old CDROM and try again, Have about 5 hours of messing around and 0 results. i get into setup all right . MOBO Asus M2N-E, AMD dual core processor, plenty of memory. I'm stumped this is to much for my 71 year old brain.
 

Answer:Disk Boot Failure, insert System Disk and press Enter

10 more replies
Relevance 82.65%

Not sure what forum this would go under but i figure it is a hard drive issue. Anyways here is my situation:

Brand new computer specs are:
intel 630 P4 / 3.0ghz / 800 FSB / L2 2mb cash
2 gigs of dual channal ddr2 ram (pc 4200 / 533 mhz)
DVD Burner 16x8x16
250gig sata drive (in microsoft terms 203 gigs)
600 watt power supply (to much but i want it for future upgradability)
radeon x800

I think that is it. I quadrouple checked everything is compatible, and it is becasue it turns on and as far as i know everything works. The only thing i can think of is wrong is that since the HD is not formatted maybe that is it, but putting in windows CD or boot disk doesn't work. I also though maybe that the DVD burner wasn't working, but i checked that and it is all plugged in and good to go. So i am going to ask a very hard question... What is wrong?!?!?! Can anyone please help me!
 

Answer:Disk Boot Failure, Insert Sytem Disk and Press Enter

Make sure your BIOS is set to boot first from floppy, then from CD and finally from HD.
Boot from the (bootable) Windows CD and have your SATA drivers (on the floppydisk) ready when asked for SCSI drivers etc. and to press F6.
 

10 more replies
Relevance 82.65%

"disk boot failure insert system disk and press enter"
whenever i start my PC i get this message. I have tried booting my xp cd with no luck, i also tried running my linux live disk, with the same problem. My first thought was the boot menu. I checked and it is set at 1) cd-rom 2)HDD. I then went to set my master drive and it said none, when i entered that menu i selected automatic selection. Under master drive it said i had 0MB capacity. It seems to me that my HHD is not been recognized. ANy thoughts or suggestions??
 

Answer:disk boot failure insert system disk and press enter

12 more replies
Relevance 82.65%

I recently built my own PC and I had a friend come over and help install the OS, first we installed Windows 98 and everything worked fine and then we installed the Windows XP Upgrade, now whenever my computer starts up it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and just sits there, so I put in the Windows XP Upgrade disc and hit enter and if you wait it will start up normally. And I do not understand it. Does anybody know what I can do?
 

Answer:Disk Boot Failure, Insert System Disk And Press Enter

boot from the xp cd and choose install
ignore the first repair option and continue with install
when windows finds previous installation then choose repair
you will have to reload video drivers and any ms updates but it will leave your files intact
 

2 more replies