Computer Support Forum

Any ideas to solve this error?

Question: Any ideas to solve this error?

Error caused by a device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type : Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart
Cause : Unknown device driver
Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible

Information about this error

You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.

Next steps

We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.

Relevance 100%
Preferred Solution: Any ideas to solve this error?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Any ideas to solve this error?

Did you change anything before that error started occuring? Such as new hardware etc?

Regards,

Korrupt

3 more replies
Relevance 61.91%

Hi,

I built my Core2 machine about 4-5 months ago and Vista64 Ultimate has been no problem. All of a sudden the other morning I found it idling with no O/S running. I rebooted and all day it kept cutting out every 30-60 minutes. I can't find any rhyme or reason or isolate to any specific actions. I looked in device manage and it had a ! by the display adapters icon and something else that's now gone from the list UBS, SMU or something (not USB adapters). I reinstalled the video card adapter driver from CD and pulled out the card and plugged it back in and thought I was fixed. After about 8 hours it happened again so I uninstalled AVG free because it said it was corrupted (probably just the definitions). This morning I found the machine idling again.

I can't read the blue screen fast enough other than to read SYSTEM_SERVICE_EXCEPTION. Windows update had been doing updates (I was unaware 'til yesterday) and other than AVG nightly updates, there is nothing new on the machine recently.

The hardware is straightforward and the video card is the only card on the system. I have 4 matched 1 GB sticks of RAM and a great set of fans. The video card is an Asus EAH3450 - rather simple card w/only a heat sink though.

How can I even go about tackling this isuue? Is there software that does diagnostics or is it endless guessing?

Thanks guys.

Answer:BSOD - any ideas to solve it?

Every time the OS crashes it creates a DMP file in the \Windows\minidump directory. That "dump" file is a summary of the software conditions at the time of the crash. Analysis of the dump(s) can frequently help to pinpoint the cause of software-related crashes.

If you copy the latest few DMP files from that folder to a different location, then zip them up and upload the zip file, someone may be able to tell you why the machine is crashing.

more replies
Relevance 61.91%

I bought a computer off of Ebay for $100 with the hopes to get it running good (with some upgrades) for me to game with. Its a Dell Dimension E510 running windows xp. I have had countless issues with it and no matter what trouble shooting I go through I cannot figure out what is wrong. Let me start with what is wrong....when I boot up it gets to the dell logo and the white bar at the bottom loading bios will not complete it halts at about 25%. Because it freezes I cannot access the bios nor windows. Due to suggestions I tried resetting the bios by removing the cmos battery. When I did that it would not go to the logo screen but either would be a blank screen with a blinking cursor...or it would be a black screen that says x300xt bios p/n 113-A33-437-102 and not move any further. The diagnostic lights indicate a solid number 1 and number 4 light for the x300 screen....and for the other (bios freeze) the 1 2 3 lights are lit solid green. The fans work, the hard drive works (tried it in another system), the ram is brand new just bought it (yes this error occured before I switched the RAM). I also tried unplugging the cd drives and no change. What do you think is wrong or what else should I try? When I first got it, it would sometimes do these errors, and sometimes boot to windows...its random, but now it seems to be stuck between these two errors I explained.
 

Answer:Big Problem Cannot Solve Any Ideas?

I should also note that I added a new 500W psu from pc + cooling. So new RAM, new psu, working hard drive....ughh I need help with this one lol
 

11 more replies
Relevance 61.91%

I HAVE DEFRAGMENTED, USED SCAN DISC, VIRUS SCANNED, CHECKED FOR PARASITES WITH NOTHING SHOWING, DOES THAT MEAN THERE IS NOT A VIRUS/PARASITE? WHAT ELSE? I HAVE PLENTY OF SPACE AVAILABLE. DO I DISCONNECT ZIP DRIVE PRINTER ETC.? WOULD IT BE A GOOD IDEA TO REINSTALL EVERYTHING AGAIN? I'M NOT SURE I'D MANAGE TO REINSTALL ALL DRIVERS, ETC.

Answer:STILL GOING SLOW ANY MORE IDEAS TO HELP SOLVE

download regcleaner and system mechanic an run em both that should bring everythings speed back, if not a format is probably the only other optionprof

10 more replies
Relevance 53.71%

Hi guys, this has been something I've trying to solve for a little while and frankly I'm about ready to admit defeat. I must admit to reading a few threads on here that seem to pertain to similar issues, but as of yet I've been unable to solve this issue despite days and days of troubleshooting. I'd like to consider myself pretty computer literate (don't like the phrase) but the deeper technical side eludes me at times, so apologies in advance if I seem clueless ('cause I'm not! :P).

Also, I'm not sure if it's the right kind of etiquette to outright sign up to this site with the sole intention of solving an issue, but after lurking for a couple of days in a few threads it really does seem that there are a lot of extremely knowledgeable/helpful members, so it seemed a no-brainer to try and find some help.

I made a thread on a site relevant to the software I'm using (where my general issue is important) explaining everything, so if you click the link and read up what I've found so far, it's easier than repeating myself: https://www.xsplit.com/forum/viewtop...pic.php#p88394

(sorry if this counts as advertising? It just seems easier than copy and pasting mine and another person's posts into here)
In short, my theory is the issue is either Astro MixAmp (click for image) related or maybe a driver issue, and I'm leaning towards Flash, given I swear I can sometimes hear it when PC games are loading and there's no game audio. As far as I'm aware, my audio drivers are up to date.... Read more

Answer:"Static sound" problem; out of ideas to solve/fix

If you would just post your problem on here and not link to other sites, it would be much better. Linking and having someone try to read other sites is not the best way. I read your post, but refuse to go all over the web to see what is actually going on with your PC.

All I know is you have a static problem, nothing else. Sorry if this is direct and to the point.

9 more replies
Relevance 53.3%

Hi-- Right click on file\folder and my sent to f-drive re writer has vanished. i had a dell technician in my computer for 3 hour and he eventually decided to send me a new re-writer out which i installed and nothing changed. I can play dvds ok the drive loads anything up- but when i right glick its gone i tried unistalling nero--i trie looking at properties on f-drive--i re-installed driver software---and nothing has changed anybody got any ideas ????
 

Answer:Solved: Solved: Dell can not solve it--maybe you guys have some ideas

16 more replies
Relevance 45.92%

Error -107 when loading url https://www.staysure.co.uk/travel-i...This is the message I get when I try to go into various sites.Please can you tell me how to solve it.Thank youJeannine

Answer:How to solve error 107.

URL worked fine on my Win 10. What browser are you using and is it the same on alternatives?Please give the full error message off the screen (I was unable to find any reference to it).Always pop back and let us know the outcome - thanks

2 more replies
Relevance 45.92%

I installed "HTC Home" desktop gadget in my PC then windows error reporting shows this error. How do i solve this error.
"Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: update.exe
Problem Signature 02: 2.0.9.0
Problem Signature 03: 4de78899
Problem Signature 04: System.Xml
Problem Signature 05: 4.0.0.0
Problem Signature 06: 4ba1dfec
Problem Signature 07: 710
Problem Signature 08: 27
Problem Signature 09: System.Xml.XmlException
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
"

Answer:How to solve this error?

Please help me! I face this error every time when i start my PC.

1 more replies
Relevance 45.92%

I am unable to install Tweak UI(MS power toy),because when i attempt to do so the message appeare and says:"The produce entry point GetllDirectoryW could not be located in the dynamic link library KERNEL32.dll."

please some1 guide me to solve this problem.

Thanks in adavance.

Answer:How can i solve this error!!??

in the run box type
sfc /scannow
and press enter

10 more replies
Relevance 45.92%

RM1090_02074.00000.15234.28006_RETAIL_prod_signed_1001_025CA7_000-IN.ffu

Answer:How to solve this Error?

That's not an error, that's an image file for a Lumia 535.

more replies
Relevance 45.92%
Question: Help Solve error

so i installed win7 rtm, launched it, it detected something and asked for reboot, i've rebooted and, when i log in i dont see anything but wallpaper, just wallpaper, no START menu or anything, when i'm logging in Safe Mode, i can see start menu, etc, how can i solve this issue

Answer:Help Solve error

Not sure. What happens when you right click on the desktop (wallpaper)? Can you tell what screen resolution has been set to?

2 more replies
Relevance 45.92%
Relevance 45.51%

When i press ctrl+f in Internet Explorer, and type some thing i get an error, I posted a screenshot of it. Does anyone know what might be causing this?
 

Answer:[Solve] IE Search Error.

10 more replies
Relevance 45.51%

I get this error and i don't know how to solve!! pls help!
Say if you need more information ...

Win 7 64Bit -> installed on SATA HDD
I tried to install Win 8 64Bit on an IDE HDD which is also in my pc
greets.mowh

Answer:I get this error in VirtualBox and i don't know how to solve

I had this error too. Try deleting the virtual machine and then rebuilding it, using a static drive instead of Dynamic. I allocated 20gb and the issue went away.

1 more replies
Relevance 45.51%

win10 builds 10856 suddenly reloads many times and give me various messages about errors IRQL_NOT_LESS_OR_EQUAL, then another time video_shedullar_internal_errors, 3-d Prodess_initualisation_failed, 4- 0x000021a, 5 - critical_process_died_ 6 - system_process_misuse. How can I solved all these problems. Thank you very much for Your work. Nikolai Skorokhodov. Russia

Answer:IRQL_NOT_LESS_OR_EQUAL - what does this error and how do I solve it?

Can you please join and provide the more information on what you were you trying to update (Presuming you were trying to install TH2 / Fall Update) i.e desktop, tablet, all in one, laptop etc

5 more replies
Relevance 45.51%

been waiting for almost a week for a code to verify my account and i still haven't received it till now

Answer:how to solve error 800488fe?

Allow me to be the first to ask....What are you talking about?

4 more replies
Relevance 45.51%

need settup.hlp to run excel

Answer:how to solve error 1706 ?

First hit on Google:http://support.microsoft.com/kb/297834Second hit on Google:http://support.microsoft.com/kb/253768MIKEhttp://www.skeptic.com/

2 more replies
Relevance 45.51%

every time i click on games the error code comes up and only relates to games not installed. solitaire and 4 others are installed but the others are not.

Answer:How do I solve error code0X80072EFF?

Hi - I don't know what device or OS you are using (always better to add that info in your question).
HOWEVER - when I searched this in Bing, it looks like you might have a pretty bad virus. This link is where I found the information and has a few options for you:Error Code: 0X80072EFF - Microsoft Community
Good luck!

2 more replies
Relevance 45.51%

I'm using a Lumia 520.Synchronisation with Exchange is not possible and I got this erre number

Answer:How do I solve the error 85010004?

The first thing to check is whether your device is set to the correct date and time. Is that so?

2 more replies
Relevance 45.51%

Okay i really dont know how to solve this issue, it happens today and since then whatever i do (restarting or shut down my pc) nothing helps...
i cannot login to win 7... i can right click and refresh but i cannot open any application... when i open My Computer... the loading takes forever... can somebody help solve this?

I tried to do what this web suggests :

Fix for COM Surrogate Has Stopped Working Error in Vista - How-To Geek

but i cannot go to the advance setting area... it just takes all forever... its like the explorer is crashing... please help on how to solve this? i dont want to format or anything... and i dont know what is wrong... basically i just browsing media files while the error occurs for the first time please i need immediate help...

Answer:please help to solve COM SURROGATE error

Do the following steps.Get to the Advanced Boot Options screen.
Start the computer in Safe Mode.
Troubleshoot Application Conflicts by Performing a Clean Startup.
Restart in normal mode and see if there is an improvement.

9 more replies
Relevance 45.51%

https://docs.google.com/file/d/0BziMjhKC5sVTZmZpQnh2NUtkSm8/edit?usp=docslist_apiThis is the link to the photo













Solved!

Go to Solution.

Answer:What is the watchdog error and is there a way to solve it ?

A watchdog is a piece of code in Windows that measures the execution time of commands. If a critical command takes too long to execute, Windows will generate this code. It is generally caused by hardware-related issues with critical components such as an SSD or core drivers.
 
Are you up to date with all of your system's drivers?
 
support.lenovo.com/en/products

2 more replies
Relevance 45.51%

Hii, my new phone nokia lumia 535 windows store any on app download error are 80070490 how to solove??????????????

Answer:How do I solve the error 80070490?

See my reply over here: http://forums.windowscentral.com/ask...oad-error.html

6 more replies
Relevance 45.51%

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

Answer:request to solve error

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

3 more replies
Relevance 45.51%

how to solve error 711 suddenly my net off help me. I watch many videos on youtube but its not get successful ive me solution

Answer:tell me all types to solve this error

http://windows-exe-errors.com/fix-e...

8 more replies
Relevance 45.51%

Hi

Genuine windows error keeps popping up and I can't figure how to solve. Copy of diagnostics below. Any step by step help would be greatly appreciated, as Microsoft's solution is to buy another activation code it seems!


Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {B839CF76-018F-48B7-877A-3C5732677C7E}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Mi... Read more

Answer:Can anybody help me solve 0x8004fe21 error

If KB3004394 is installed - uninstall it, reboot twice, then post a new MGADiag report
...note that Windows Update will then detect a new version of KB3004394 to be installed - this should not cause problems.

9 more replies
Relevance 45.51%

Hi all,I have bought a game called Warcraft III a while ago. It worked on my former computer, which was a Windows XP Professional Home Edition.Now, this pc was taken by my dad and now I have to work with this Windows XP professional. (Not a home edition and it's a laptop).I tried to install the game again. It worked. Now I tried to run, but everytime it's about to load the main menu, it crashes and following error appears :Now, is there any way to solve this? If so, how?And what does the error means to by the way?Would appreciate help.Cheerz,Baldir

Answer:Annoying Error? How to solve? (if possible)

Is the game downloaded?

10 more replies
Relevance 45.51%

I trying to solve this MS exchange server error but i can solve it. i want to repair my EDB file form exchange server because it is very useful for me. view the problem it here:



So please give any solution for this type of problem....!
 

More replies
Relevance 45.51%

my msn can't sign in 2 weeks im trying sending error 800488fe plz help me solve that issue

Answer:how to solve msn error 800488fe plz

http://windowslivehelp.com/solution...

2 more replies
Relevance 45.51%

i have made the TSF_Vista_Support.zip file please take a look on it and help me

i have :

processor of 2.4 core 2 due

1.5 GB of ram

ATI HD4650

Answer:please help me to solve BSOD error

These are STOP 0x124 errors - which are generated by the CPU and then reported to Windows. Not very easy to read.

That being said, they are most often related to hardware failures or compatibility issues.
Have you run the Windows Vista Upgrade Advisor (free here: http://www.microsoft.com/windows/win...e-advisor.aspx ) to see if that's an issue?

Have you added any new hardware/software recently that might be causing a problem?

5 more replies
Relevance 45.51%

windows boot managerSystem failed to start. Recent hardware or software change might be the cause.Then I get three options. But it keeps returningg me to this screen. Please help. Thank You

Answer:How do I solve the startup error?

1- are those the messages you get? 2- Did you try the repair my computer option and then use start-up repair?If you don't have a restoration disc you can download and make one at the following address:http://neosmart.net/blog/2008/windo...Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 45.51%
Question: Solve Backup Error

Using Backup & Restore, this is the third night I got backup errors (red X), but the first time I saw the message.

"Backup failed on shadow copy on source volume got deleted. Might be caused by high write activity on the volume.
retry backup.. Consider increasing shadow copy storage using VSSADMIN resize shadow storage command.
Error code 0x80780169."

Retrying will be futile. Somebody suggested increasing the volume to 15%. There is very little information online.
Any suggestions? Should I increase the volume? I have never gotten this message in the years that I have been using Backup & Restore.

I am just supposed to be backing up my files; not creating an image, unless it copies to the disk regardless of what I choose to send to external drive.

In Event Viewer there were at least a half-dozen messages that the oldest volume was deleted. According to "Manage your space," I think I have one image on the drive and another image in backup, but I don't know if I can trust the info.

Thank you.

More replies
Relevance 45.51%

please sir,reply me that the way of how to solve run-time error 339. thanks

Answer:How to solve run - time error 339

... click here for fix explanation.... (do'nt download anything!).... Posting is provided "AS IS" with no warrantieshttp://img692.imageshack.us/img692/...Grrrr... ...im

2 more replies
Relevance 45.1%

Hey guys,

like 6 hours ago ....I recently got this message :

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

this came up when I was trying to go into any folder on my desktop .....my documents......and any other folders I have. I can go into My Computer but when I can there I cant get into my documents or my C Drive where I have alot of important stuff which I really need to get into asap.


I was searching through forums on google ......for this type of situation....I found alot of people with the same problem..,....the one I heard that would work is using FixPolicies.exe........but the problem is when I use that I can install it and everything ....but I cant seem to open the folder .....and that Restriction message comes up again when I try to open the folder ....soooo I really dont know what to do......I must figure a way to get into my documents...

Im running on Windows XP ...and yes I am the system adminstator as well...I have scanned my computer ....I had 5 trojans detected.....they have been removed.......

Any HELP!!! would be Great..ASAP ...... ..im in a total jam right now.. ..I hope I dont lose any of the files im my documents.

Answer:Impossible Restriction Error - Need Help How to Solve

Hi studyhard4life and welcome to TSF !

Your restriction issues are probably caused by the trojans or by the fact that you removed them. An antivirus will detect and quarantine infected files but it won't revert the changes those files made to your system. A malware infection rarely comes alone so there are probably remnants or other malwares on your system.

Please follow these 5 steps and read the instructions carefully :
http://www.techsupportforum.com/secu...oval-help.html
Post and attach your final logs in a new thread in the HJT section. Be patient as that section is very busy, the security analysts will get back to you with specific instructions as soon as they'll have reviewed your logs.

1 more replies
Relevance 45.1%

its cloud Linux hosting ,in
 

More replies
Relevance 45.1%

E sonic phoenix award bios can't do detected USB removal disk the first problem that is fromMotherboard so can i update bios for that errors ?

More replies
Relevance 45.1%

imagedit.ocx or one of its depenencies not correctly registered

Answer:how to solve imagedit error message

Simply correctly register imagedit.ocx or one of its depenencies.Try reinstalling the associated application.Bryan

3 more replies
Relevance 45.1%

I am Using Windows 7 Ultimate

When ever i play games my Pc get a blue screen and reboots and tells me windows have recovered from an unexpeted shutdown and gives me this error message grrrrr

I already have formated and reloaded my pc 4 times then, I downloaded windows 7 sound driver for my mother board and graphics card and it still does the same, so I downloaded drivers for Vista and still the same result, I did test my hardware they are all working and not over heating and my windows is updated so, I am out of options please advice me what to do

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 866D0024
BCP3: B62C4000
BCP4: 00000135
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\102809-20421-01.dmp
C:\Users\Terran\AppData\Local\Temp\WER-31718-0.sysdata.xml

Answer:How can i solve this blue screen error ?

Please zip up the contents of the C:\Windows\Minidump folder and upload/attach the .zip file with your next post.

A STOP 0x124 error is an error that's identified by your hardware - which then notifies Windows about it. In most cases it's a hardware failure or an incompatibility.

So:
- check to ensure that your BIOS and drivers are updated to the latest versions
- if you've been inside the case recently - go back in and reseat everything (I got a STOP 0x124 because of this yesterday).
- Run the Windows 7 upgrade advisor to see if it pinpoints any possible compatibilty errors (free from here: http://www.microsoft.com/downloads/d...displayLang=en

The memory dump file(s) will be used to see if there's any other issues, and to see what older drivers are loaded when the crash occurs.

9 more replies
Relevance 45.1%

Hi..

Info :-

Windows XP Home edition with SP2

Im assuming its becuase of SP2 but not sure of the fix..

Im trying to load a CD (1 - 2 years old) its a Weight Watchers Points Plus CD , it used to run fine a couple of years ago but now for some reason it wont allow me to open up the program once installed. Installation is fine but I get the following erors upon running the .exe

Any ideas ?





This is the log file that is created..

<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="wwde.exe" FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="wwde.exe" SIZE="5721340" CHECKSUM="0xB7F4751E" BIN_FILE_VERSION="5.3.0.0" BIN_PRODUCT_VERSION="5.3.0.0" PRODUCT_VERSION="5, 1, 0, 0" FILE_DESCRIPTION="Authorware Runtime" COMPANY_NAME="Macromedia, Inc." PRODUCT_NAME="" FILE_VERSION="5.300" ORIGINAL_FILENAME="" INTERNAL_NAME="" LEGAL_COPYRIGHT="1987-1998, Macromedia, Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="5.3.0.0" UPTO_BIN_PRODUCT_VERSION="5.3.0.0" LINK_DATE="09/12/1999 19:15:51" UPTO_LINK_DATE="09/12/1999 19:15:51" VER_LANGUAGE="English (Uni... Read more

Answer:Runtime Error , failed to solve..

9 more replies
Relevance 45.1%

during installation of xp, a error with blue screen occured

Answer:how to solve blue screen error in xp during f

Yes well what was the error code & message ?

2 more replies
Relevance 45.1%

When i try to login on my gmail i get an error msg as: cannot find 'file://c:/users/user/documents/my google.html' and the when i press enter twice i am able to login .Can anyone tell me the reason and solution or the same!

Answer:how to solve gmail login error

Ask the experts here: http://mail.google.com/support/

4 more replies
Relevance 45.1%

i m using window xp sp-2..suddenly at the running time my pc stopped..n now not working..m trying to format it...but when i m trying for format and press enter for format it just restart the pc..so i dnt knw wat should i do..??

Answer:how to solve window xp formatting error...

See response 2 in this - try cleaning the contacts on the ram modules, and making sure the modules are properly seated:http://www.computing.net/hardware/w...For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.For a brand name computer, see the Owner's or User's manual if you need to - how to remove or replace the ram is usually in that - it may already be in your installed programs. If you can't get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it - it's in the downloads for your specific model. For a generic desktop computer, see the mboard manual if you need to - how to remove or replace the ram is usually in that. ......Check your hard drive with the manufacturer's diagnostics.See the latter part of response 1 in this:http://www.computing.net/windows95/...If you don't have a floppy drive, you can get a CD image diagnostic utility from most hard drive manufacturer's web sites, but obviously you would need to make a burned CD, preferably a CD-R for best compatibility, on another computer if you need to.E.g.Seagate's Seatools will test any brand of hard drive.Do the long test. http://www.seagate.com/ww/v/index.j...The bootable Dos versions of SeaTools can be used even if Windows is not working properly.If the hard drive itself tests okay, any data problems found can be fixed, one way or another.........If the hard drive itself tests okay.........Re-installing Windows... Read more

2 more replies
Relevance 45.1%

I had windows 8.1 pro already but decided to make new clean installation.
I downloaded the iso from here: Creating installation media for Windows 8.1 - Windows Help
I clicked on Creating media downloaded the iso file to my hard disk and burned it to a dvd.
Then in my pc booted from the dvd in the windows setup i deleted the C: partition and created it again so i don't have any windows to restore back my mistake.
Then i continued entered my windows serial number then it collected files...On the third step it throw this error:
windows could not set the offline locale information. error code : 0x80000001
I don't have a clue what is the proeblem.
I googled some say hard disk failure some say language setup is wrong so i tried to selected uk for time...and keyboard then uk and hebrew since im in Israel.
Then i tried us . In all cases it didn't help same error.
Any ideas what is the problem ? And how to solve it ?
I'm now on my laptop i can download and burn the windows again but how do i know if the problem will not come again ?

Answer:How to solve error: code : 0x80000001 ?

Check the date and time in BIOS setup, make sure it's correct. Also check the Time Zone.

8 more replies
Relevance 45.1%

Hi!
I've seen a few people with this issue around but yet to find a fix, getting the error : Internalerror:extracttemporyfile: the file 7z.dll was not found! I've tried reinstalling 7zip, pasting the 7z.dll to various places etc but no fix found! Any advice? anyone else had this?
Thanks!

Answer:Trying to install games, 7z.dll error, can't solve

Try PeaZip

1 more replies
Relevance 45.1%

I got this laptop for Christmas and it worked fine. Then i ran a Virus Scan (McAfee, It came with it), Then I shutdown the computer and went to sleep. When I got up I turned it back on and it started up, then it loaded the login screen and says "Incorrect Password" and whatnot. So I clicked OK and tried to login with my password and it doesn't work. I tried several other passwords and no password, But nothing worked. I Also tried Safemode, But it does the same thing. I tried Ophcrack, It just says there is no password.

Please, Someone help me solve this problem without having to lose any data.

Answer:Please help solve! Windows 7 Login Error.

Welcome to Seven Forums

Offline NT Password & Registry Editor

Download the bootdisk on that page from another computer and burn it to a disk.Use the likes of image burn-poweriso or Nero,burn as an image file,not data.
Run it from your computer (make sure boot from cd is allowed from within your BIOS)
Follow the instructions on the website given above and on the disc.

Dan

9 more replies
Relevance 45.1%

Hi,
I've been experiencing a Securityrisk.downldr and would like to know how to solve it? I've been trying with NAV and superantispyware, but not successful. Below is my Hijackthis scan log. Pls help urgently! thanks ya!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:58:19 AM, on 26/3/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16609)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\Bioscrypt\VeriSoft\Bin\AsGHost.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\ProgramData\ybspqjyt\qhcxohul.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Health Check\HPHC_Scheduler.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe
C:\Program Files\Google\Gmail Notifier\gnotify.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Adobe\Reader 8.0\Reader\reader_sl.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Play... Read more

Answer:How to solve a Securityrisk.downldr error?

Please do this:

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here.
Please attach extra.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

What DSS will do: create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review. DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

---------------------------------------------------------------------------------------------

1 more replies
Relevance 45.1%

hi..
I installed first time the simulator and open it first time and i got following error.

Problem signature:
Problem Event Name: APPCRASH
Application Name: cpnmld.exe
Application Version: 0.0.0.0
Application Timestamp: 3ffe766e
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdadb
Exception Code: c0000005
Exception Offset: 00057a79
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: baac
Additional Information 2: baac5f0a4a5b74a99058c19ace5d60ae
Additional Information 3: f5d7
Additional Information 4: f5d7d7ee9503e472a0cc9d8559dae5dc


please provide the solution so i can move ahead in my work..

Waiting for the answers.

Thanks in advance...

Answer:How to solve application crash error?

hello...
i found this article.
Install CPN Tools
and Use cardinfo for Windows
and i don't know this program is compatible with win7 or not. because i don't use it.
hope can help.

2 more replies
Relevance 45.1%

Do I wanted to know if anyone can help me to fix the error 0x800f081f Dism/online /Cleanup-Image /RestoreHealth?

Thanks a lot.
Best regards.

Answer:How to solve the error 0x800f081f Dism?

Resolution

For Windows 8.1, Windows 8, Windows Server 2012 R2 or Windows Server 2012

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.
Open an elevated command prompt. To do this, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.Type the following command, and then press Enter.
It may take several minutes for the command operation to be completed.DISM.exe /Online /Cleanup-image /Restorehealth
Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows... Read more

5 more replies
Relevance 45.1%

I read about connection 45 & 47 pins to resolve "ide #1 error" and my question...
how change c-sel/slave mode in diffrent way (without connecting pins)?
I just bought liteon dvd-rw drive (sosw-833s 51c) and install into satellite 1410-304 and my laptop don't work with this drive (at startup "ide #1 error", os don't see drive)

Answer:Satellite 1410-304: How to solve IDE #1 error?

I think, there is no other option (i would also not recommend to change the pin assignment).
You should have asked your Servicepartner what drive's are supported on the type of Notebook, he know's about it ..... I'm sorry to say, but you should have a look before you bought the drive.

Br, Ben

5 more replies
Relevance 45.1%

Hi,
this error just came up this morning after I removed delta-search from both of my browsers,Internet Explorer and Google Chrome using adwcleaner. The problem start right after I run Malwarebytes. The whole desktop is not responding after an hour and I get blackscreen whenever I logon to my account. I solve this blackscreen problem by the help of this thread, http://http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/safe-mode-works-but-i-cant-log-on-to-the-normal/6e877026-3f55-4ca0-a458-aecdea54926e .

The only services that is being disabled is shown in this picture:

After I solved the blackscreen problem, I get this error which said:
[*]"There was a Problem Starting C:\ProgramData\Malwarebytes'anti malware\cleanup.dll"
[*]"The specified module could not be found"

And I click 'Okay'.

Whenever I enable the MBAM services, I always get this 'blackscreen'. Any idea on fixing it?

P.S Sorry for my bad grammar

Answer:How do I solve missing 'cleanup.dll' error ?

Nio,

Please do the following...

Download the Farbar Recovery Scan Tool
Select the 64-bit version.

Save to the Desktop. Double-click the downloaded file to run it.
When the tool opens click Yes to disclaimer.
Press the Scan button.
FRST64 makes a log (FRST.txt) in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply. <<---


The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply. <<---

9 more replies
Relevance 45.1%

A runtime error is a software or hardware problem that prevents a program from working correctly. Runtime errors might cause you to lose information in the file you're working on, cause errors in the file (corrupt the file) so you can't work with it, or prevent you from using a feature. Unlike stop errors, runtime errors don't typically cause Windows or a program to stop working.
Runtime errors can occur if you are running two software programs that aren't compatible, if your computer has memory problems, or if the computer has been infected with malicious software. If a runtime error keeps occurring, follow these steps:
1. Install the latest updates for Windows and for the program displaying the error. Note that the update for the program might be listed as an optional update on the Windows Update page. Click Start button then show all programs and open Windows Update.
2. Check Action Center for a solution to the program displaying the error.
When you have Windows Error Reporting turned on and a program stops working, a problem report is typically sent to Microsoft for more analysis. If a solution is available, or there are steps you can take to minimize the likelihood of the problem recurring, they'll be available in Action Center. Click to Flag icon in Notification area to open Action Center.
3. Update and run your antivirus software. Windows doesn't come with antivirus software, but Action Center can often monitor the antivirus software that you or your ... Read more

More replies
Relevance 45.1%

Note I just installed a few firewire card. However, it doesn't seem to matter if I have it in or not.

STOP: 0x0C5 (0x0, 0x02, 0x01, 0x8053465A)
 

Answer:Help me solve this blue screen error

11 more replies
Relevance 45.1%

C:\program files\TruekKey\McAfee.Truekey.cp.core.localization.dll? What is this error? How to solve?

More replies
Relevance 45.1%

how to solve Bluetooth error on windows 10 ?
 

More replies
Relevance 45.1%

Guys,

I'm a newbie here- excuse me if I don't know all the protocols around here, I'll try to pick them up quickly.

Anyway- here are the details on my PC:

Compaq Presario 5WV280
900 mhz AMD athlon
Windows ME

256 MB RAM
30 GB HD
56k modem

Machine is pretty much as setup from Compaq, except we added 128MB RAM a couple of weeks ago for a total of 256 MB- no problems after that install. We also recently replaced the modem, the original modem died and it was replaced with a Diamond multimedia Supramax 56i PCI that my brother gave me. No problems with that after we got it installed + running.
The problem came up about a week after the modem replacement + RAM install.


I am using Netzero Dialup as my ISP.

The problem I am having is this. My PC is in (what I think is) Safe mode- low resolution display, giving me Error 24 "Display driver error". It tells me that I need to reinstall the display driver, or install an upgraded driver, because the current driver is either damaged or not correctly installed. It then prompts me to the "Installation wizard" to find a better driver- but when I go thru that procedure, it says I already have the best driver installed.

When I try to remove the display driver (thinking it might work to remove + then reinstall), it begins to go thru the process, then the system freezes- every time. I tried the HP/Compaq online tech chat, but they were not very helpful- everything they suggest... Read more

Answer:Display error 24 - unable to solve...

What video card is in the machine? What have you tried? A typical test would be to remove the modem and ram again to see if that works. Optionally, theres a slim chance the video card went bad. If its onboard and using shared memory, I would suspect the ram. If its not onboard, maybe try another card. Problems like this require trial and error of removing hardware until you can narrow down the culprit.
 

5 more replies
Relevance 45.1%

When I am surfing the web or watching a film, my computer may place still and do not reply without any indicates. It may revolve into blue screen in seconds if I click or press buttons repeatedly. So, what can I do to prevent computer go blue screen or what is the finest method to improve my computer performance in minutes?

Answer:How to solve a blue screen error?

This program will work out the problem & then provide links to possible fixes.WhoCrashedhttp://www.softpedia.com/get/System...http://www.softpedia.com/progScreen...http://www.resplendence.com/main

3 more replies
Relevance 44.69%

I am having a problem with Internet explorer. Here are the facts, Am running windows 200 pro at the moment but have also tried XP and same results. Am constantly getting Internet explorer has encountered an error and must close etc. So far I have reinstalled Windows 2000 3 times on 2 different hard drives and also have tried Windows XP on both drives. I am including hijackthis log and Sun java error msg. Doesn't seem to matter where I go on web is always the same. At this point I am open to almost any idea. Thank you JohnP
 

Answer:Any Ideas Anyone IE error

As it appears to be a Java error, have you updated Java on the PC?
 

3 more replies
Relevance 44.69%

Hey guys everytime I start up IE8 i get the following message.


any idea how to solve this?...I cant seem to make it go away.
thanks
 

Answer:I keep getting this IE8 error..ideas?

Start IE with all add-ons disabled.
 

9 more replies
Relevance 44.69%

Help, I have a game that worked on my system some months ago that stopped. Upon reading your forum about the 16 bit msg error, i replaced the autoexec.nt in the repair file to system32 file. It now allows me to pull up the master set-up, but then i get error 106... setup is unable to run an intermediate file needed to proceed with instalation. I have XP home i thought that since this an older game i would try running windows compatability wizard but this did not work either....any sugestions?
 

Answer:Any Ideas on how to fix error 106?

what game is it?
 

1 more replies
Relevance 44.69%

windows 7 and chrome gives me a waiting for cache error that makes surfing sluggish. Has anyone solved this problem?

Answer:how do I solve a waiting for cache error in chrome

This might help:http://www.electrictoolbox.com/empt...and this previous thread here:http://www.computing.net/answers/wi...Also it might help to increase the disk space allocated to temporary internet files (TIFs).

2 more replies
Relevance 44.69%

I bought microsoft band. I installed Microsoft Health application and when I run the application I see following messege:
"Network Error
Something went wrong. Please check your network connection and try again."
When I click again I have the same messege after few seconds. I am from Poland. I have US region in phone and English.
Any ideas how to solve this problem?

Answer:Microsoft Health - network error. How to solve?

Please help me with Microsoft Health App for MSFT Band . I have a F*#!*$!g network error on my Lumia 1520. How to solve?

5 more replies
Relevance 44.69%

Hey guys,

like 6 hours ago ....I recently got this message :

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

this came up when I was trying to go into any folder on my desktop .....my documents......and any other folders I have. I can go into My Computer but when I can there I cant get into my documents or the C Drive where I have alot of important stuff which I really need to get into.
I was searching through forums from google ......for this type of situation....I found alot of people with the same problem..,....the one I heard that would work is using FixPolicies.exe........but the problem is when I use that I can install it and everything ....but I cant seem to open the folder .....and that Restriction message comes up again when I try to open the folder ....soooo I really dont know what to do......I must figure a way to get into my documents...

Im running on Windows XP ...and yes I am the system adminstator as well...I have scanned my computer ....I had 5 trojans detected.....they have been removed.......

Any HELP!!! would be Great..ASAP ...... ..im in a total jam right now.. ..I hope I dont lose any of the files in my documents or C drive
 

More replies
Relevance 44.69%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-BJD6C-K3YVH-DVQJG
Windows Product Key Hash: WFqPPaNJ0hrc3E/8MgITJa2Xf0M=
Windows Product ID: 00359-OEM-8992687-00118
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {2BCC8FD5-B365-4957-A754-C2D30410368F}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1... Read more

Answer:0xC004E003 error code ..how to solve the problem? =(

Hello acotazchot and welcome to Seven Forums.

Error Code 0xC004E003 usually occurs when product activation fails. If you were trying to activate your copy of Windows 7 you may want to try telephone support.

1. Click Start, and in the Search box type : slui.exe 4
2. Press ENTER on your Keyboard
3. Select your Country.
4. Select the Phone Activation option, and hold on for a real person.

error code: 0xC004E003 - Microsoft Community

EDIT: Please follow the diagnostic information provided by NoelDP in Post # 3.

2 more replies
Relevance 44.69%

I tried syncing my account.It doesn't work.I forgot my password and was suggested to take up a questionnaire but couldn't answer those questions too. I created a new a new email.But I'm not able to create a new account.I want to reset my phone but don't know how to. Will my contacts be deleted if i reset my phone ?

Answer:How to solve error 80048264 ? How to reset phone ?

Yes, if you reset your phone you will lose everything.

4 more replies
Relevance 44.69%

installation process stop automatically at 98% and an error comes that3132r5c4.sys is not found. please help ho to install the operating system

Answer:solve 3132r5c4.sys error while install operat

Are you using an actual Microsoft XP disc or some sort of copy?

2 more replies
Relevance 44.69%

I bought my Nokia Lumia 630 recently and found a number of linked apps in the store ready to install, one of which is for music. I just get an error code 80073cf9 when I try to install it. How can I solve this as I want to listen to the music I have transferred to the phone from my PC.

Answer:How can I solve the error code when trying to install the music app?

I had that problem and had to factory restore to solve.

3 more replies
Relevance 44.69%

Your PC need to restart.
Error Code: 0x0000005D
Parameters:
0x00000000BFEBFBFF
0x0000000020100800
0x0000000000000001
0x0000000000000001

Answer:Windows 10 Tech Preview Error How to solve?

Duplicate thread. Continue advice here to keep things tidy... http://forums.windowscentral.com/ask...dows-10-a.html
Thank you.

2 more replies
Relevance 44.69%

How to resolve error code W1BF3CJKC-GRMEJ1. with my Desktop PC Think center.

More replies
Relevance 44.69%

I have recently aquired a DVD-ROM drive to upgrade my Sat Pro 4290 optical drive from a CD-ROM to DVD-ROM. As suspected I am having the problem that the drive is not recognised and get the IDE #1 error.

I can get windows XP to recognise the drive by deleting the Secondary IDE Channel in the Hardware and then searching for new new hardware. It then installs the IDE Channel and then finds and installs the DVD-ROM and works fine. I reboot the laptop and back to square one!

I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on theh IDE connectors.

I do not want to risk this and was wondering if anybody found an easier way of doing this?

Many Thanks

Answer:Satellite Pro 4290: How to solve the IDE #1 error issue

Hi

> I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on the IDE connectors.

That?s not 100% true. This is not a setting issue on the motherboard but the setting of the CD/DVD drive.
The drive supports different master\slave\c-sel settings and if they are not compatible the BIOS will not recognize the drive correctly.

On the external drives (for desktop PC) it?s possible to change such settings by switching the jumper but this is not possible to the slim notebooks drives.
The notebook drives settings are stored in the firmware!!

I found different ?not legal? tools which can change the master/slave/c-sel settings but I would not recommend using it.
The risks are too high that the drive will be damage.

So try to replace the drive with a compatible one?

2 more replies
Relevance 44.69%

My Windows 7 professional 32 bit shows this problem ..how to solve this problem help me friends.

Answer:Windows 7 Shows .DLL Error How to solve this problem Help me

Hello mkannan and welcome to Seven Forums.

When I googled msisvt32.dll I got "no results found". Whenever I see that I immediately start thinking virus or other malware. Legitimate .dll files almost always have information available about them. Suggest you run a full scan with your own updated antivirus suite. No anti-virus product is 100% effective 100% of the time (if there was such a thing we'd all be using it.) So I also recommend you scan your computer with some additional free on-demand scanners. The more scanners you use that come back "no malware found" the more likely your computer is not infected.

Windows Defender Offline

Malwarebytes

ESET Online Scanner

SuperAntispyware

HitmanPro

Kaspersky TDSSKiller

After running the malware scans I'd also check for damaged or corrupt system files. Run a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot the computer after each scan.

SFC /SCANNOW Command - System File Checker

Please post back the results of the scans.

2 more replies
Relevance 44.69%

Hello,
thousands upon thousands of gamers running WinXP and CS are recieving two errors which cause disruption to the game.
the first being the NET_SendPacket ERROR:WSAEINTR error. This error simply cuts the player out of the server they were in and back to the desktop. However the internet connection still exists. The second error (which I find usually occurs if I restart Counter-Strike to play again) completely cuts the player off the internet, with a message stating: net_sendpacket error: no error.
These errors occur after playing online for anywhere between 10 to 30 minutes of play and are extemely annoying. I have read numerous fixes for this problem, but none of them have seemed to help solve everyones problem. Here is what I have tried:
1) the suggestions from http://cs.helpandsupport.net/?aid=37
2) just about every suggestion from http://www.forumplanet.com/counterstrike/topic.asp?fid=4961&tid=718924&p=1, these include changing the amount of RAM CS uses, changing the default port settings, uninstalling QOS Packet Scheduling...
3) the suggestions listed here http://cs.helpandsupport.net/?aid=40 (changing RAM settings)
4) My own experiments with my modem settings. These include:
Hardware Flow Control
Modem Error Control
Modem Compression
IP Header Compression
Use Default Gateway
Enable Software Compression
I found that turning off IP Header Compression fixed the problem for me in the past. But since reinstalling WinXP the other day (and putting my settings bac... Read more

Answer:Enlisting your help to solve the big Counter-Strike Error

16 more replies
Relevance 44.69%

Hello.I am having a problem in logging on my computer (it's operating system is Windows XP Professional SP3).A couple of days ago, my computer was running slow/freezing so I forced the computer to turn off by pressing its power button (just after installing a new add-on for my newly-installed firefox). But when I turned back on the computer, I received a BSOD (Blue Screen of Death).So, next time I turned it on, I pressed F8 and stopped the computer from rebooting. The following message appeared on the screen:STOP: c000021a {Fatal System Error}The Session Manager Initialization system process terminated unexpectedly with a status of 0xc000026c (0x00000000 0x00000000)The system has been shut down.So, after a bit of work, I found another hard drive (running XP Home Edition) and set it as master and the problematic one as slave. However, I cannot keep my computer like this, as the hard drive with home edition is badly-partitioned with little space and is lacking many important programs that my other hard drive has.I do not have the original operating system CDs, and I've been searching the internet all day for a solution. Could someone please help me solve this problem?Thanks.

Answer:How can I solve a startup fatal system error?

When you had the original drive installed did you go to F8 Safe Mode and undertake a system restore ?

4 more replies
Relevance 44.69%

Hello,
I have a laptop (lenovo) with windows 8.1. I have blue screen error problem that occusr frequently while using my laptop and every time  errors are different. Some of them are - Kernel trap , memory management, IRQL_NOT_LESS_OR_EQUAL,  system service
exception etc. Please tell me what's wrong with it and how can i solve these errors?

Thanks

More replies
Relevance 44.69%

I am trying to sign into my Microsoft account and it says try again later and the error code 0x80048264. I have tried a lot and it never signs me in. How do I solve the error code 0x80048264?

More replies
Relevance 44.69%

When i am downloading the McAfee Manager subscription and it suddenly stops in the middle of the process and showing Error 7305. Is there any way how to Fix McAfee Antivirus Error 7305. I tried for a few http://www.mcafeetechsupportnumber.... persons online.

More replies
Relevance 44.69%

i've tried to play a game(metro 2033) but physxloader.dll error keeps me from going any furtherand its done this with 3 of the games i've tried to install,i'm at a lost to fix this issue.                                  any suggestions?

Answer:physxloader.dll is in error ;adding this my solve your problem

What is the error? Does it say that the dll can't be found?You can do a full search on your machine for the DLL and once you find it, if you have it, then register it to your system.If you don't have it you can try to download it.http://www.dll-files.com/dffsetup_physxloader.exe

1 more replies
Relevance 44.69%

how to solve new nokia lumia 535 app download error ???

Answer:How do I solve a Nokia Lumia 535 app download error?

Usually this is caused by your Microsoft Account not being able to sync. BTW an error code or any explanation given really allows us to help you better.
Check that you can sync... Settings > email + accounts > hold down on the account name > tap "sync" from the popup menu > follow up on any conditions it alerts you about if it fails make sure date and time are correct for where you areuncheck any restrictions in Data Sensetry a Soft Reset - hold Volume Down + Power buttons until the phone reboots (you don't loose data, but it clears out "gunk" residing in memoryyou could log on to your Microsoft Account on a PC Browser and change your password > go back to the phone and try a sync again, it will ask for the new password and this might reset it

12 more replies
Relevance 44.69%

I purchased an off lease pc that came with W7. It tooks days but I downloaded all required windows updates to get it up to date. I checked to ensure it was W7 Service Pack 1 so it would be ready for the W10 update (it was). I waited and finally the Get Windows 10 app appeared. I reserved a copy. It said my pc was ready for w10 upgrade and to schedule a date. I waited but finally scheduled a date for the W10 upgrade. The upgrade took a long time. I checked to see if my pc was activated and it was not. It had placed a new code in the key. I tried to put my w& code in there. No matter what I do it gives me error code OxC004C003. This code does not make sense or I would not have been able to download w7 updates and it would not have said my computer was ready. Please tell me how to solve this issue.

Answer:I installed W10 Pro from my W7 pc but it gives me activation error OxC004C003. How can I solve this?

You tried to put a key in the computer after Windows 10 was installed? I would like to point out (on the offset that you didn't know) that Windows 10 keys are completely different from previous Windows operating systems. If you had a genuine, non-pirated copy of Windows 7, then a new Windows 10 key would have automatically been generated for you, and your computer activated.
Now I can't remember 100%, but I believe there were some issues regarding activation. Computers said they weren't activated, but really they are. Please wait for a second opinion on this, as I, again, am not 100% certain.
To put it shortly, your computer is activated and you do not need to put a key in as one was generated for you. I believe.

2 more replies
Relevance 44.69%

I have trouble playing BURNOUT PARADISE game in my windows 8.

I will tell the problem by posting the images. so some one can help me easily.

First I have opened the game. And the game play has been started [ i mean the starting portion ; not the game]
1.

2.

But Suddenly this has caused the game to stop
3.

So Somebody please help me to solve the problem

Sorry for the bad English

Answer:Help to solve BURNOUT PARADISE error in WIN8 ?

Read this.... Burnout Paradise - Fix Those Pesky Crashes! - Steam Users' Forums

1 more replies
Relevance 44.69%

wen i md doing cop n paste at that time integrity violated error are comin, now how can solve this problem

Answer:how to solve file integrity violated error

This error is due to a problem in the VT52.SYS device driver, which has no overflow checking for its buffer.Turning off the Allow Fast Paste option in the PIF file may help to correct the problem.

2 more replies
Relevance 44.69%

Hp Pavilion Dv7 Notebook Pc, With OS! Windows 7 home premium 64bit.Error message:-  Hard Disk 1 (301) - it sound like there could be a malwareVirus on it. Got AVG Internet Security 2012 on the notebook. I don't knowThe guys at the Shop where I bought it said I must not update the notebook'ssoftware & drivers to much.











Solved!
View Solution.

Answer:How do I solve a "Hard disk 1 (301)" error on my HP Pavilion...

Hard Disk 1 (301) is a hard drive failure. It means that the hard drive needs to be replaced.You'll need to get a new hard drive and install it, then you'll need to reinstall the Windows operating system using the HP Recovery Media. If you're in warranty, HP will send you the parts per your warranty terms.If you're out of warranty, you'll need to purchase a replacement hard drive and then call HP to order the HP Recovery Media for your specific notebook.The number for US support is 1-800-474-6836.I will be glad to answer any additional questions or provide more details if you'd like to replace it yourself. It's not too difficult.

4 more replies
Relevance 44.69%

Hi

I have had a problem with boot error tos0002 after Ghosting image to a new drive.
I have resolved it by copying the BOOTSECT.BAK from the Vista disc to the C: drive.

I just copied and kept the old one as you can with Vista but I guess it may be similar with XP.
I reinstalled the Qosmio player from the respective disc.

I hope this helps someone because I have spent ages trying to find a fix.

Answer:SOLUTION - How to solve the TOS0002 error issue

Thanks for this information Emma.

It?s always nice to see people who post useful solution proposals?

Greets

3 more replies
Relevance 44.28%

DRIVER_IRQL_NOT_LESS_OR_EQUAL

*** - Stop : 0x000000D1 (0xfb617000, 0x00000002, 0x00000000, 0xefa34db1)

***A7can5wn.sys. ADDRESS EFA34DB1 base at EFA2E000, datestamp 3BA93301

Any idea what this message means on the screen of death ??
 

Answer:Error message any ideas ?

here is a website with stop codes
http://www.aumha.org/win5/kbestop.htm

look down the lefthandside menu for you stopcode 0x000000D1
you will find they have a few suggestions and links - try those links and see if that helps - post back if you need more help here

also a memory test from here may be worth a try
http://www.memtest86.com/
http://oca.microsoft.com/en/windiag.asp

I search google and cant find that filename - sometimes if you can find what device the filename is used with - you can just update the driver and fix the problem

does the PC work at all - when do you get the error
 

1 more replies
Relevance 44.28%

Ok,

Yesterday evening, i started up my computer and as it began to boot up, it passed the Recovery Genius stage and then just before the Windows XP splash screen, the following text is displayed:

RPL-ROM-ADR: 0030 1880 4554
RPL-ROM-IRQ: 11

RPL-ROM-FFC: 5 DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

I restarted the machine several times and then placed my Windows XP Professional disk in and the computer booted up fine. I then turned off the machine and then entered the Recovery Genius on start up and tried to save all the data - it returned a message that there was no partition. I started the computer up again placing the disc in the drive and it started once again. The thing that confused me most is that it says there is no partition, yet it displays all my data when fully booted up.

Started my computer up this evening and the same process occurred. I inserted the disc, hoping it would repeat what happened previously (boot up into Windows with the disc), but now it doesn't at all.

If I use the Windows XP Professional disc to attempt to repair the problem, it also shows there are no partitions.

BUT THE DATA SHOWED UP YESTERDAY! EVEN AFTER IT HAD SAID THERE WERE NO PARTITIONS!

I hope someone on the forums can help as my college work was stored on the machine, and due to the type of machine, I have been unable to make a backup since just after Christmas, so there is a heck of a lot on there.

Many Thanks,

Jamie

Answer:XP Boot Up Error - Any Ideas?

can you see the drive in the bios,it may be a loose or faulty eide cable or the drive
d/l the h/d manufacturers diognostic utility and run it

2 more replies
Relevance 44.28%

Still using AVG 8.5 and todays update was interrupted by this error msg. [IMG]click here[/IMG]No idea what it is but on closing it without selecting either option the update seems to have completed normally.Maybe it's time to upgrade :o)

Answer:Any ideas on this error message?

click here

7 more replies
Relevance 44.28%

Atattched is a screen shot of the error that I got on a server. It has not done it since the last time which was about a week ago, but I am curious as to what exactly it means. Thanks.
 

Answer:I have a picture of the error...... Any ideas ??

Have you checked your DNS logs? Also could be that something got hung up in the system memory. If all is quiet 1 week later I probably wouldn't waste too much time on it.
 

1 more replies
Relevance 44.28%

I have a RAID5 array using four 320GB drives on a Silicon Image SiI 3114 RAID controller. Came into the room tonight to hear a click-of-death emanating from one of the drives. Figure, okay, no problem, we'll swap in another drive and rebuild the RAID... except after shutting down and restarting, one of the other drives now shows up as an 18GB ROM?!?!?!? Needless to say, I now have a broken RAID...

The drives were running a little hot, so I'm hoping after a cool-down, I'll at least get one back long enough to copy some critical stuff off the volume. Anyone have any other ideas? Anyone maybe familiar with this controller and why one drive might be showing up as the wrong type?? Anyone tried Runtime RAID Reconstructor; would it be effective in a situation like this?

 

Answer:RAID error... any ideas?

I have never used that controller [I use either promise or highpoint] however this site may have some help for you in getting data off of the single working drive.
http://www.runtime.org/ Download the raid reconsturctor and see if you can access the drive when you connect it to a working system.

FWIW this is why I always tell people that raid of any type is NOT a backup plan. You need to image the array on a regular basis and store the image on a NAS, external, network, etc. Raid5, raid1, or raid01 are hardware redundant only; it does nothing for a virus, malware, corrupted driver install, etc. Every error is mirrored.
 

2 more replies
Relevance 44.28%

Hi,Have been experiencing a stop error,see below.Any ideas why please?.TaStop: c000021a {fatal System Error}The windows subsystem System Process terminated unexpectedly with a status of0xc0000005 (0x7c911f52 0x0069f074).The system has been shut down

Answer:Stop error,any ideas

See if there is anything here that helps click here

3 more replies
Relevance 43.87%

Basically, I have two computers. One has Mandriva Linux on it (desktop) and the other has Windows 7 (notebook). The desktop can connect to the internet no problem. There is nothing to configure except for the initial username and password login. When I try to use the notebook, Windows 7 gives me a "Windows cannot detect proxy" error, which doesn't make sense. My university's internet doesn't require a proxy. It's a simple login page and that's it.

I went to the tech guy and he told me verbatim, "I don't know. Just use the computer that works." What? Yeah, what wonderful advice. He said maybe the computers were trying to share MAC addresses. That's the only help he gave.

Here's the kicker: I did have the notebook dual-booting Windows 7 and Mandriva. Mandriva always worked with the net. It's 7 that has issues. Vista did the same thing. I've turned off the firewall, virus-scanner and everything. It still can't pick up the net. The only page I can access is my university's homepage. I know it's their server because I went to work and a friends house where both the wireless and ethernet connections were flawless.

Any ideas?

Answer:My university's tech support won't help solve proxy error

Not very good with this stuff, but are you having issues only at your university?

20 more replies
Relevance 43.87%

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Data.OleDb.OleDbException: Unknown
at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult)
at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult)
at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult)
at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Way2Sms.contactsDataSet3TableAdapters.GroupsTableAdapter.Fill(GroupsDataTable dataTable)
at Way2Sms.Form1.Form1_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Form... Read more

More replies
Relevance 43.87%

I am new user bu mistake I have removed internet explorer, I have downloaded internet explorer 8 again but while installing it the error comes -- loadlibrary failed to load ieframe dll. pls suggest how to install internet explorer 8 again.
 

More replies
Relevance 43.87%

hi ,

my computer is not booting , i trying for 1 week but now the problem comes: when i run startup repair, details:

"a recent driver installation or upgrade maybe preventing the system from starting .
repair action: system files integrity check and repair
result: failed error code = 0 * 490
time taken = 520029 ms

i have tried various solutions:
cleaned diskpart
used bootrec.exe /fixmbr

but none has helped !! could you help me ?

Answer:How to solve this Constant Windows blue screen error ?

Start with Troubleshooting Windows 7 Failure to Boot and post back if you need help as you follow those instructions.

1 more replies