Computer Support Forum

Typo in Event 8003

Question: Typo in Event 8003

Apparently, this bug (typo) was not fixed for several years!!! Still it read "bowser" instead of "browser". I see this in 64-bit Windows 7/Computer Management/Event Viewer/Windows Logs/SystemLevel "Error", Source "bowser", General "Log Name: SystemSource: bowserDate: 3/11/2010 2:07:25 PMEvent ID: 8003Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: NORMAN-CPDescription:The master browser has received a server announcement from the computer MEDIACENTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{7D3A7E95-23A7-42BA-B071-81703C4348F5}. The master browser is stopping or an election is being forced.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="bowser" /> <EventID Qualifiers="49152">8003</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-03-11T19:07:25.063000000Z" /> <EventRecordID>70040</EventRecordID> <Channel>System</Channel> <Computer>NORMAN-CP</Computer> <Security /> </System> <EventData> <Data>\Device\LanmanDatagramReceiver</Data> <Data>MEDIACENTER</Data> <Data>NetBT_Tcpip_{7D3A7E95-23A7-42BA-B071-81703C4348F5}</Data> <Binary>000000000300320000000000431F00C0000000000000000000000000000000000000000000000000</Binary> </EventData></Event>":;

Relevance 100%
Preferred Solution: Typo in Event 8003

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Typo in Event 8003

Hi,I think the following website explains the story:http://blogs.msdn.com/larryosterman/archive/2006/03/14/551368.aspx

3 more replies
Relevance 79.95%

Hi,
I receive twice a day this error message on my PDC event viewer: Event ID #8003, type error, source MRxSmb "The master browser has received a server announcement from the computer PC11 that believes that it is the master browser for the domain on transport NetBT_Tcpip {28DB5AF5-D003-497E-8F45.The master browser is stopping or an election is being forced."

PC11 is a workstation in my network with a windows 2000 server and it has winXP on it.

This error message appears after we configured a VPN conection on PC11

What is the problem and how can I solve it ?



Thank's a lot.

DanaR

 









  • Read more

    More replies
  • Relevance 54.12%
    Question: error message 8003

    The Windows 2003 Server started acting up. The following error message from source MRxSmb appeared in the events.
    The master browser has received a server announcement from the computer LT that believes that it is the master browser for the domain on transport NetBT_Tcpip {E17706458-B675-4664-9094}. The master browser is stopped or an election is being force.

    I disconnected the LT computer from the server and ran ComboFix on it. The following is the logs that printed out once I ran ComboFix. Do I need to do anything else?[/font]

    ComboFix 11-05-11.04 - dhagan 05/12/2011 21:13:11.1.2 - x86
    Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1007.565 [GMT -4:00]
    Running from: D:\adc.exe
    .
    .
    ((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
    .
    .
    c:\documents and settings\OCPD\WINDOWS
    c:\windows\system32\regobj.dll
    c:\windows\system32\UNWISE.EXE
    .
    .
    ((((((((((((((((((((((((( Files Created from 2011-04-13 to 2011-05-13 )))))))))))))))))))))))))))))))
    .
    .
    2011-04-21 07:00 . 2011-04-21 07:00 -------- d-sh--w- c:\documents and settings\Default User\IETldCache
    .
    .
    .
    (((((((((((((((((((((((((((((((((((((((( Find3M Report ))))))))))))))))))))))))))))))))))))))))))))))))))))
    .
    2011-03-07 05:33 . 2008-12-04 15:12 692736 ----a-w- c:\windows\system32\inetcomm.dll
    2011-03-04 06:37 . 2008-04-14 12:00 420864 ----a-w- c:\windows\s... Read more

    Answer:error message 8003

    Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Please take note:If you have since resolved the original problem you were having, we would appreciate you letting us know. If you are unable to create a log because your computer cannot start up successfully please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system.
    If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available.If you are unable to perform the steps we have recommended please try one more time and if unsuccessful alert us of such and we will design an alternate means of obtaining the necessary information.If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review your topic an do their best to resolve your issues.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply'... Read more

    3 more replies
    Relevance 52.89%

    This is inbeded in my ASUS A8N-SLI DELUXE mother board but it is not working. In device manager i cant unistall, update or rollback the driver. It says there is an error but it dosent give a specific error number. I use a wireless usb card to connect to my router and the internet but i would like to be wired. What do i need to do to get this hardware working? thanks for the help.

    Answer:marvell yukon 88E8001/8003/8010

    I had a very simmilar problem with the same NIC on an Asus A8V-Deluxe.

    Ended up the board was frying PCI devices so I hit it with an axe

    2 more replies
    Relevance 46.74%
    Question: typo

    For my typo read "explanatory". What am I up to?

    Answer:typo

    ..

    3 more replies
    Relevance 46.74%
    Question: Is this a typo?

    the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?

    Answer:Is this a typo?

      
    Quote: Originally Posted by F1FAN


    the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?


    You have found one

    1 more replies
    Relevance 46.33%

    A few people have commented on the typing / grammar used in the forum, just for a bit of fun I thought you might like to read this:Aoccdrnig to a rscheearch at an Elingsh uinervtisy, it deosn't mttaer in > > waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht > > frist and lsat ltteer is at the rghit pclae. The rset can be a toatl mses > > and you can sitll raed it wouthit porbelm. Tihs is bcuseae we do not raed > > ervey lteter by it slef but the wrod as a wlohe

    Answer:On the subject of typo's

    looks normal to me:-)

    10 more replies
    Relevance 46.33%
    Question: Typo error

    Sorry.... 22%

    More replies
    Relevance 46.33%
    Question: Microsoft Typo

    Microsoft made a typo in their WinSAT application, How can we let them know about it?

    Answer:Microsoft Typo

    Hi Steven,

    You can try contacting them by following the link below. Whether or not you will get a response I cannot say. I have managed to locate the error in the 'WinSAT.exe' file (notice the space between the letters), and you can edit it to replace the erroneous 'o' with an 'i', however by doing so you will probably cause it to fail an SFC scan. In my opinion, it is such a minor error that it is probably best left ignored.
    Dwarf




    https://support.microsoft.com/contac...&WS=aufeedback

    6 more replies
    Relevance 46.33%

    I mistyped a url earlier (I believe i typed 'radiosahck' instead of radioshack) and was redirected to a strange website (something about internet surveys I believe) I closed it right away and did a quick scan with malwarebytes to make sure nothing was wrong, and it came up empty. I'm probably being a bit paranoid here, but is this anything to really worry about?

    Answer:Odd URL typo redirect...

    Redirects can be something to worry about, as you have no idea what content is being hosted on the re-direct. Most popular anti virus programs, have real-time scanning, where it's constantly scanning your computer, and as soon as you're redirected to a bad website, it will block any content that's harmful to your computer. I use Eset and it does this.

    1 more replies
    Relevance 46.33%
    Question: Password Typo

    I only have 1 password for all my docs but I have 4 of them which I can't open. Propably a typo when I saved these docs.

    They are in OpenOffice writer format

    Anyway for a back door?

    Thanks
     

    Answer:Password Typo

    Please refer to the forum rules. We cannot assisst with password issues so I have to close this thread.

    Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.
     

    1 more replies
    Relevance 46.33%

    Okay helping a friend via long distance phone calls and the random email. This is the only info I have, if someone could shed some light on this and help, we both would appreciate it. Here is the email she was able to send:

    "Still messing with that damn trojan. AVG sees it and asks the usual, delete, heal, or move to vault. No matter how many times I choose delete, or heal or even move, it comes back again and again. This is what was causing my IE to try and dial out (at least, that's what I get from looking online for info on this damned thing) and share my info with the hacker. Avast does not seem to see...this file. It is saving itself (and apparently restoring itself) in my Windows folder as a dll file. prntsvr.dll to be exact.

    The name AVG gives is PSW.Dumarin.C. The last thing I tried was to turn my
    system restore off, delete the file and re-start... but guess what? lol, Yep, it is still there. *sigh* Why do people have to make these things???"

    ------------end of message--------------
    Looking around for info I found only ONE place (so far) that had any info about it, and that is assuming she misspelled the name of the thing...

    Name: [email protected]
    Aliases: W32.Dumaru.B/C | [email protected] | W32/Dumaru-B

    I think she mis-spelled the name, because Google found nothing about her original file name..

    I found info here: http://www.bitdefender.com/bd/site/virusinfo.php?menu_id=1&v_id=160

    And a free removal tool here, which I've... Read more

    Answer:PSW.Dumarin.C (possible typo)

    16 more replies
    Relevance 45.92%

    OneDrive has over 7x that amount buy giving everyone that uses it 15GB.

    More replies
    Relevance 45.92%

    I was trying out a freeware security suite and i encountered this typo that might make you laugh or not
     

    Answer:security suite typo

    Looks like an application I would have been involved with judging by the typo! dependant on where the app was developed it depends on the native language and who translated it possibily as I noticed many strange word in manuals translated to engwish over the years.

    BTW what is the app you trying "swift"???
     

    5 more replies
    Relevance 45.92%

    So I was browsing around in Windows Defender (Windows Settings > Update & Security > Windows Defender > Open Windows Defender Security Center > Virus & threat protection > Virus & threat protection settings, then scroll down to Controlled folder access.)

    The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it.
    (Refer to the attached picture)

    Either:
    ? The word "changed" has a typo in it and should be the word "changes" (with an 's' instead of a 'd'), or
    ? There is at least one missing word in between the words "unauthorized" & "changed"
    Somebody should inform Microsoft about this typo.

    But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do? It was originally off, but I turned it On. Yet I must say that I have seen a few messages pop up in the right corner of the screen, stating that Windows Defender blocked some programs from making changes. One of them showed explorer.exe from modifying the Favorites folder without me doing anything with Favorites. Exactly what does this option do? Is it kind of like some sort of strict "Firewall"? Because if so, then I like that.

    Answer:HAH, I Found A Typo In Windows!

    Originally Posted by pepanee


    The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it. ...



    Mine says 'unauthorised' (but then it should in the UK) - still has the typo though






    But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do?



    Blocks access to your files and documents by unknown apps (malware/ransomware). It's off by default because not all 'good' apps are in it's 'trusted' list. It takes a bit of fiddling to get all your apps to work after you turn it on.

    Change Windows Defender Controlled Folder Access Settings - Windows 10

    4 more replies
    Relevance 45.92%
    Question: typo on home page

    The current Maxthon is 3.1.4.1000
    You have 3.1.3.xxxx
    just ab fyi. the download is right 314. just not the home page listing.:wave
     

    More replies
    Relevance 45.92%

    Is there any way I can report this?

    This is just my first post and I'm tryna help out a bit

    Answer:I just found a typo in Windows 10 TP

    skippr said:

    Is there any way I can report this?

    This is just my first post and I'm tryna help out a bit



    Hey skippr, welcome to TenForums!
    Try the Feedback App.
    What'd ya find?

    11 more replies
    Relevance 45.92%

    Hello everyone,

    I am experiencing the red typo lines when there are no typos. This happens on occasion when I'm typing emails and posting or responding to forums. It seems to occur when there is an actually typo and I correct the error. After that the entire post/email from that point on will have the red typo lines.

    For example it is happening now... I'll try to post a pic for a better understanding.

    Has anyone experience this as well and most importantly does anyone know of a solutions to this?

    My unit is new and I have yet to DL Office 365 so I don't have Word. Not sure if that will matter.

    Any input is greatly appreciated. Thanks

    Answer:Red typo lines when no typos

    Language settings?

    8 more replies
    Relevance 45.92%

    Hi can someone please help clear up my concerns because I accidentally interned the wrong DNS address on my new router.
    After entering this typo I almost immediately that my connection was unstable especially on Linux and yesterday evening when I logged back into my router the DNS settings were set to there defaults. But I was able to surf the web kinda in Windows though it timed out often and certain webpages wouldn't even open, and now when ever I enter the correct DNS settings it disconnects from the internet.  
     
    Here's what I entered
     
    222.67.222.222
    220.67.220.220
     
    Instead of
     
    208.67.222.222
    208.67.220.220
     
    I'm really feeling uneasy and stressed about this, any advice?
     
     
     
    Why does stuff like this happen whenever your in poor health or any other of life's trials and complications?

    Answer:Open DNS typo on router

    Two things you might check:
     
    1. In Windows, do your Network Properties have a DNS Server entry(s) that point(s) to your router (probably 192.168.1.1 or close) or do they point to the published OpenDNS IP addresses? Easy check: From an Elevated Command Prompt: ipconfig /all
     
    2. After you corrected the DNS router entries, did you have the router do a cold reboot?
     
    I believe you shouldn't overly stress yourself over this if you didn't make any financial transactions. But new passwords could be needed.

    6 more replies
    Relevance 45.51%

    Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

    Any ideas?
    Event 1001, BugCheck
    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
    <EventRecordID>39029</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>M... Read more

    Answer:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

    Memory exception but we need to examine the DMP files to find out why.

    We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

    If you are overclocking STOP
    We could also use some system information, which you can get easily by running msinfo32.
    To do that go to start>run>type msinfo32>enter

    When it is finished running go to file>save>name it and upload to us here.
    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

    The procedure:





    Quote:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
    *If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


    To ensure minidumps are enabled:





    Quote:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

    9 more replies
    Relevance 45.1%

    NAME: Googkle
    ALIAS: Googkle.com

    Summary


    F-Secure staff has found a malicious website that utilizes a spelling error when typing the name of the popular search engine - 'Google.com'. If a user opens a malicious website, his/her computer gets hijacked - a lot of different malware gets automatically downloaded and installed: trojan droppers, trojan downloaders, backdoors, a proxy trojan and a spying trojan. Also a few adware-related files are installed.

    The name of the malicious website is 'Googkle.com'. PLEASE DO NOT GO TO THIS WEBSITE! Otherwise your computer will get infected! We have reported the case to the authorities.

    Detailed Description


    Our investigation revealed that the whole infection starts from the 'googkle.com' website. This website, as well as a few related websites are owned by people with Russian names. Also several malicious files that are downloaded from these websites have Russian texts.

    When the 'googkle.com' is opened in a browser, it shows 2 popup windows that are linked to the following websites:


    www ntsearch.com
    toolbarpartner.com

    The 'ntsearch.com' website downloads and runs the 'pop.chm' file and the 'toolbarpartner.com' website downloads and runs the 'ddfs.chm' file. Both files are downloaded using exploits and they contain exploits themselves to run embedded executable files. One of the webpages of the 'toolbarpartner.com... Read more

    More replies
    Relevance 45.1%

    I think this is a virus behavior. Recently whenever I type in microsoft waord or notepad or fill up webforms in IE, the cursor jumps anywhere in the previous sentences, or highlights the last some letters somewhere and the entire type goes haywaire. Now Also this is getting typed anywhere and I have to delete, retype. very painful. I have Norton antivirus 2005, zerospyware (after reading the latest article in your mag only), adware, spybot and zone alarm, all fully updated. and none have been able to pick up a virus/spyware after a thorough system scan. I am going crazy typing, especially when i am prescribing medicines to my patients. I don't want to reload windows and all my applications again.Pl HelpDr Alok Modi MD

    Answer:Typo errors due to cursor jumping

    Go into Device Manager and uninstall your Mouse then restart computer

    10 more replies
    Relevance 45.1%

    I'm just setting up a new computer, and not used to the keyboard. When I was installing the operating system I was asked for a User name. Before I had a chance to do anything it had accepted the name GREU and moved on to the next step. No back button! Bloody i7's, so fast!

    I've tried doing a search in regedit for GREU, changed it in one place, but its still showing up all over. Is there a complete fix to this or should I resign myself to being known as Greu for the next few years?
     

    Answer:Typo when entering user name - I'm now Greu!

    6 more replies
    Relevance 45.1%

    Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

    Windows 7 64 bit Ultimate retail
    All new hardware
    OS build Service Pack 1 less than a month

    I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
    Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


    Thank you for your help

    Answer:TYPO I meant CTL.DLL ERROR BSOD

      
    Quote: Originally Posted by etanas


    Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

    Windows 7 64 bit Ultimate retail
    All new hardware
    OS build Service Pack 1 less than a month

    I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
    Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


    Thank you for your help


    Memory corruption caused by an unknown driver. Please run memtest and driver verifier.

    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

    Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.





    Quote:
    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup ... Read more

    8 more replies
    Relevance 45.1%

    I have a Dell XS 15z Laptop
    I am getting a windows 10 Recovery Message ( your PC couldn't start correctly )
    I am attemting to create and use a recovery USB using the link below.
    https://www.dell.com/support/article/us/en/19/sln298442/how-to-create-and-use-the-dell-recovery--restore-usb-drive?lang=en
    Everything seems to work except I don't have the "Secure Boot" option in my Bios.
    Anytime I try to boot the USB I get the message:
    Operation System not found

    Please advise.

    Answer:Operation System Not Found ( not a typo )

    Are you creating the recovery USB on a different PC?
    I hope so.

    1 more replies
    Relevance 45.1%

    for your information:

    Spyware authors and phishing fraudsters yanked an old scam out of the playbook Wednesday by directing malicious code at Internet users who may be prone to typing or spelling deficiencies, according to security researchers.

    Finnish security firm F-Secure said they discovered an attack aimed at Web surfers attempting to land on Google's (Quote, Chart) homepage, but who may have mistyped the Web address.

    Internet users who punch in "Googkle.com" are treated to a host malicious code, as the computer gets slammed with a heap of the unwanted software that is automatically downloaded and installed. The malware includes: Trojan droppers, Trojan downloaders, backdoors, a proxy Trojan and a spying Trojan. A few adware-related files are also installed, the firm said.

    Google Typo Crashes Systems
     

    More replies
    Relevance 45.1%

    My correct email address is logged with my Microsoft account, but typo is showing on my windows phone Microsoft account under email+accounts, message says attention required.  Click on message tried to correct using 'fix it here' then get message
    There's a temporary problem, getting this message for 2 days now.  Help

    More replies
    Relevance 45.1%

    I installed Adobe 8 and now all of my Desktop icons have the Adobe logo and will only open up Adobe, not my usual shortcuts, like word, excel, games etc...I tried uninstalling Adobe, which fixed the problem, but when I re-installed it came back again. I don't knw how to fix this...I'm new to all this! I'm running windows vista Help!
     

    Answer:Adobe error {fixed typo}

    I'm not sure why that is happening but you can try and fix the icons by right clicking on the programs that are displaying the incorrect icons, select properties>change Icon and find the correct one
     

    3 more replies
    Relevance 45.1%

    Hi... I wasn't exactly sure where to post this, I'm posting it both here and in the linux forum

    I accidentally made an ext2 filesystem (mke2fs) on top of my pre-existing Windows XP partition (accidentally typed /dev/sdb1 instead of /dev/sda1)... so now it won't boot, and I can't seem to mount it on any OS. Anyone have any ideas on how data on it could be recovered, or if there's any way to get it working again as-is?

    Answer:ext2 + typo = dead WinXP

    Pull the drive and put it into an External USB Enclosure/Adpater. Mount it on a working computer and copy the files you want.

    2 more replies
    Relevance 45.1%

    Purchased a new laptop and skipped making the MS email but created a password for my account.When I booted up my pc later on I was greeted with an incorrect password message. I must have made a typo in the pw set up because it does not work.I also didnt create a recovery disk because I had literally only used it for 30 mins before turning it off and this problem was the last thing I ever expected to happen.There is only one account and it's the one that is locked. A to rendered a $600 purchase obsolete until I can fix it.All help is appreciated.

    More replies
    Relevance 45.1%

    Hi,

    I am having a problem when i misspell URLs.

    When i type things like google.con instead of .com, i am redirected to a host of different search sites, including searchathand.com, and daplaces.com. I am pretty sure i must be infected with something, but i have ran several online and offline spyware and malware scanners and nothing seems to find a problem.

    I am running Firefox version 1.5.0.6, but the problem also occurs in IE as well.

    Advise please!

    Cheers

    Joel

    Edit: I seem to have found what i think is the culprit for this...but this leads to another problem.

    There is a HJT entry stating
    O17 - HKLM\System\CCS\Services\Tcpip\..\{A2EA3617-0DD4-4C7B-89EC-1F1FB24D96E1}: NameServer = 85.255.114.7 85.255.112.174

    I have removed this on a couple of occasions and it only returns a few minutes later.

    Help please!!!
     

    Answer:Solved: Typo browser hijacks

    16 more replies
    Relevance 44.69%

    Heads up about a string of blogs using familiar names like FileHippo and Softpedia in their URL, when searching for software downloads. I cannot guarantee their legitimacy, or safety to visit or download from these rip-off blogs.

    Searching "avast 2017" in Google Search Engine crops up with many blogs using SEO techniques to distract users from the real FileHippo and Softpedia sites.



    oFileHippo



    downFileHippo



    theFileHippo



    eSoftpedia



    Happy Safe Browsing!
     

    Answer:Typo Squatting - Fake FileHippo, Softpedia and more!

    Download links seem legit.. I love the tactic by the way.
    I will take o-malwaretips.net lol
     

    0 more replies
    Relevance 44.28%

    Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo? For example, I type "tsanding," and instead of changing it to "standing," it underlines it red. I know I can then right-click it, and select AutoCorrect > standing, so that, from now on, if the same exact typo arises in the future, in which I accidentally type "tsanding," it'll change it to "standing." I've thus far collected *hundreds* of specific typo corrections in this way. But that's very time-consuming, and is only a weak attempt at preventing typos I may be likely to make in the future (based on the fact that I made the exact typo at least once before). Is there any way to establish that I want Microsoft Word to go ahead and correct every single "underlined red" occurrence from now on, based on its best guess as to what I meant? (except in cases where the typo was so bad that it has no guess at all) That way, when it corrects something I *didn't* want corrected, I can then go back and add what I wanted to its dictionary, to tell it not to consider that word an accident from then on.

    Answer:Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo?

    Found this in the Word Help files. On the Tools menu, click AutoCorrect Options. In the Replace box, type a word or phrase that you often mistype or misspell ? for example, type usualy. In the With box, type the correct spelling of the word ? for example, type usually. Click Add. Is this what you're talking about?

    2 more replies
    Relevance 44.28%

    Hello, is some one know where finding free Helvetica and Time family typo ?
    thank Kidkodak 57

    Answer:Finding free Helvetica and Time family typo

    Helvetica Fonts - DownloadFontsFree.Net
    Regarding "Time family", you need to be more specific.

    2 more replies
    Relevance 43.87%

    So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

    THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

    Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the ... Read more

    Answer:My Windows 7 copy looks fake. Typo on back cover. Came from China.

    Have you tried contacting ebay?:

    eBay Buyer Protection

    James

    9 more replies
    Relevance 43.46%

    When I first open Google, in the Search Box is a typo which I cannot delete.Any ideas? Many thanks. pianojoe
     

    Answer:Solved: how to delete typo which remains in Google search box when I first open Googl

    6 more replies
    Relevance 43.46%

    I have hundreds of these errors for event id's 1026,1049 and 1059, I have searched and cannot find anything remotely associated with these errors or the cause of them:

    The description for Event ID 1026 from source Internet Explorer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
     
    If the event originated on another computer, the display information had to be saved with the event.
     
    There all have the same information and event log online help does not "help" , any ideas?

    Answer:Event ID 1026 ,Event ID 1049 and Event ID 1059

    I think Iv'e answered my own question:
     
    http://msdn.microsoft.com/en-us/library/dd565636(v=vs.85).aspx error 1059
    http://msdn.microsoft.com/en-us/library/dd565650(v=vs.85).aspx error 1049
    http://msdn.microsoft.com/en-us/library/dd565667(v=vs.85).aspx error 102
    Would someone be able to check this is correct?
     
    thanks very much

    3 more replies
    Relevance 43.46%

    Thanks for any help.

    Event Type: Warning
    Event Source: WinMgmt
    Event Category: None
    Event ID: 5603
    Date: 28/11/2006
    Time: 17:57:33
    User: USER-2F62D3344E\user
    Computer: USER-2F62D3344E
    Description:
    A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Answer:What's this event in event viewer? (event source WinMgmt)

    http://support.microsoft.com/default...b;en-us;891642
    this might help

    1 more replies
    Relevance 43.05%

    So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

    THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

    Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the cds, no... Read more

    Answer:My Windows 7 copy looks counterfeit. Typo on back cover. Came from China (eBay). Pics

    It's fake, that's pretty obvious. The hologram thing is most likely a sticker on top of the actual disc surface - you can use a fingernail or razor blade at the very edge and lift it up a bit, that's 100% proof. The part numbers don't seem to match up with the actual Windows 7 Ultimate part number, and it just has a fake quality all the way around.

    If you contact Microsoft, show them the pics, explain where you bought it from and your situation, there is a small - small but it exists - chance they'll provide you with a key just for making the report and identifying the seller you got it from.

    No guarantees, but at the moment you're better off reporting it to them and going from there. Sure can't hurt to let them know, either way.

    I'd report it, personally, without even really thinking about it. It just SCREAMS fake.
     

    38 more replies
    Relevance 41.41%

    Not sure when this started but I wanted to check out a problem on this system and when I went to do some filtering on the event logs the Event Sources section was empty. I can filter by event level, I can filter by Event IDs but if I try any of the drop
    downs, Event sources or Keywords the lists are blank.

    Any suggestions?
    Peter

    More replies
    Relevance 39.36%

    Hi, all. I have been trying to figure out a serious of issues that my PC has been having. It's possible they were caused by poorly seated RAM, but the RAM seems to check out now. There is a whole slew of details on the case here: TechNet with a lot more information that will be of help, including posted evtx files. I have always gotten great help here, though, and am in dire need of a second opinion, so I thought I would check with this forum's experts.Here is the basic gist, although there is a ton more detail on the other link:Since building this machine, I've had frequent BSODs, often seemingly-related to middle of the night MSE updates, or possibly other windows updates. These always required a System Restore to recover from, as Windows was unbootable. Often it said the Restore failed, but it seemed to resolved the bootability issue at least.I have removed MSE and reseated some RAM that initially tested poorly, but which now seems to be passing MemTest no problem.I still have a series of issues that occur, and the one that was causing noticeable issues was SuperFetch causing sysmain.dll to fault (Event 1000, posted below) on every boot and periodically throughout the day. I have disabled SuperFetch, which stopped the issue from happening every boot, but it still happens occasionally, so it seems SuperFetch is but one trigger.The other most common error I have is Event 55 (posted below), possibly related to Windows Backup and/or System Restore, which seems ... Read more

    More replies
    Relevance 39.36%

    Hi all,

    i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

    "event log service is unavailable. verify that the service is running."

    so i try to start the event log service, from the services.msc program;
    whenever i try to start windows event log from services i get the message:

    "Windows could not start the windows event log service on local computer.
    Error 3: The system cannot find the path specified."

    how can i specify the path?
    or
    how can i resolve the problem?

    any help would be appreciated please---thanks

    Answer:HELP need to solve this problem asap - Unable to start event viewer/event log service

    Fire up regedit and find this key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

    With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

    %SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

    If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

    3 more replies
    Relevance 39.36%

    Description:
    Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

    For more information, see Help and Support Center at
    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 64 100000d
    0020: 31 20 20 50 61 72 61 6d 1 Param
    0028: 65 74 65 72 73 20 30 30 eters 00
    0030: 30 30 30 30 36 30 2c 20 000060,
    0038: 30 30 30 30 30 30 30 32 00000002
    0040: 2c 20 30 30 30 30 30 30 , 000000
    0048: 30 30 2c 20 62 61 36 30 00, ba60
    0050: 35 37 38 63 578c

    Some body can help me ?
     

    Answer:Random restarts Source:System Error Event Category: (102) Event is 1003

    Inside the 1 MiniDump:




    BugCheck 100000D1, {60, 2, 0, ba60578c}
    Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

    Uninstall the nvidia drivers from the control panel
    Download and install the latest drivers
     

    2 more replies
    Relevance 39.36%

    Hi,
    keep getting the errors above every startup regarding;
    11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
    7000 - "The Crypkey License service failed to start due to the following error:
    The system cannot find the file specified."
    7026 - "The following boot-start or system-start driver(s) failed to load:
    NetworkX"
    1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
    DETAIL -
    1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
    Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
    3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
    Context: Application, SystemIndex Catalog
    Details:
    (HRESULT : 0x80004005) (0x80004005)"
    I have 3 admin user profiles.
    Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
    If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

    Answer:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

    Please download MiniToolBox  , save it to your desktop and run it.
     Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
     Click Go and paste the content into your next post.
     Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
    Louis

    7 more replies
    Relevance 39.36%

    I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

    I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    Re: LoadPerf 3011, 3012
    Hi-
    I had the same problem with LoadPerf and here is what I found out:
    All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

    The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

    User Action
    To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
    The contents of the string tables are automatically rebuilt.

    I hope this helps
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

    Here are the screenshoots of my two errors.

    Answer:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

    Rebuilding the string tables as outlined in my first post fixed the problem.

    1 more replies
    Relevance 39.36%

    duct: .NET Framework; Version: 2.0.50727.8670; Event ID: 0;
    Event Source: TOASTER.EXE;


     

    More replies
    Relevance 39.36%

    i have been having this error for a couple days now and it also seems to be associated with another crash im getting from a game i play also.

    first one is a memory dump blue screen issue and the other is just the game crashing.


    Script:



    Log Name:      Application
    Source
    :        Microsoft-Windows-WMI
    Date
    :          1/17/2015 10:53:52 AM
    Event ID
    :      10
    Task Category
    None
    Level
    ... Read more

    Answer:Event ID 10 — Event Filter Query Functionality CAUSING BLUE SCREEN

    Still nothing responded on this.

    1 more replies
    Relevance 39.36%

    Hi,

    keep getting the errors above every startup regarding;

    11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
    7000 - "The Crypkey License service failed to start due to the following error:
    The system cannot find the file specified."
    7026 - "The following boot-start or system-start driver(s) failed to load:
    NetworkX"
    1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

    DETAIL -
    1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
    Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
    3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

    Context: Application, SystemIndex Catalog

    Details:
    (HRESULT : 0x80004005) (0x80004005)"

    I have 3 admin user profiles.

    Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
    If I try to launch ... Read more

    More replies
    Relevance 39.36%

    Hi,

    keep getting the errors above every startup regarding;

    11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
    7000 - "The Crypkey License service failed to start due to the following error:
    The system cannot find the file specified."
    7026 - "The following boot-start or system-start driver(s) failed to load:
    NetworkX"
    1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

    DETAIL -
    1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
    Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
    3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

    Context: Application, SystemIndex Catalog

    Details:
    (HRESULT : 0x80004005) (0x80004005)"

    I have 3 admin user profiles.

    Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
    If I try to launch ... Read more

    Answer:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

    Hiya and welcome to SevenForums!
    Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

    4 more replies
    Relevance 39.36%

    Hi people,
    I have setup a disk quota usage for the user "tester" 
    50mb = warning level
    100mb = Quota limit
    When I generated a file of > 50mb then I see well a event
    Level,Date and Time,Source,Event ID,Task Category
    Information,23-09-16 15:10:24,Ntfs,36,(2),A user hit their quota threshold on volume C:.
    when I try put a second file of more than 50mb also, first i'm block to copy it (good) and then i receive well then related event
    Level,Date and Time,Source,Event ID,Task Category
    Information,23-09-16 15:10:38,Ntfs,37,(2),A user hit their quota limit on volume C:.
    so I erase the files and try again, and then nothing in the event log !
    I have try : restart the quota management, to pout other limit for that user, to disable then enable again limitation for this user without success ! once the event 36 & 37 appear it seem that he never appear again even if a warning, limit is triggered
    again...

    any idea... ?

    More replies
    Relevance 39.36%

    Hi,

    I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

    Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



    I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



    So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



    Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

    The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

    ... Read more

    Answer:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

    First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

    I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

    2 more replies
    Relevance 38.95%

    The exact details are Log Name:      Application
    Source:        SideBySide
    Date:          9/23/2015 1:28:53 PM
    Event ID:      80
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Angela-PC
    Description:
    Activation context generation failed for "C:\Program Files (x86)\Slingplayer Desktop\Slingplayer Desktop.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component
    version already active. Conflicting components are:. Component 1: C:\windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757.manifest. Component 2: C:\windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.manifest.

    if someone can help with this error in my event log i would be so grateful.

    More replies
    Relevance 38.95%

    when I run reboot stress test at Intel platform with win10 Desktop RS1 version, after some cylces test, XHCI controller show yellow bang. Event viewer showed that event id is 14.  I want to know the indication of
    StartDeviceFailReason equals 3. I cannot find more info about this failure from website.Thanks a lot!









    -

    Provider











    [
    Name]
    Microsoft-Windows-USB-USBXHCI










    [
    Guid]
    {30E1D284-5D88-459C-83FD-6345B39B19EC}




















    EventID
    14



















    Version
    0



















    Level
    2



















    Task
    0



















    Opcode
    0



















    Keywords
    0x8000400000000000

















    -

    TimeCreated











    [
    SystemTime]
    2016-11-25T19:48:29.908393500Z




















    EventRecordID
    7099


















    Correlation

















    -

    Execution











    [
    ProcessID]
    4










    [
    ThreadID]
    232




















    Channel
    System



















    Computer
    LAPTOP-QQEHB4HS

















    -

    Security











    [
    UserID]
    S-1-5-18












    -

    EventData










    fid_UcxController
    0x187f9ddd64a8







    ... Read more

    More replies
    Relevance 38.95%

    received three error codes in a row with the following error message:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk, what do i do i need help please.........
    HP,WINDOWS 7 HOME PREMIUM
     

    Answer:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk

    11 more replies
    Relevance 38.95%

    EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

    Hello everyone,

    I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

    SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
    I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

    More replies
    Relevance 38.95%

    Hi all,

    I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

    Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

    Log Name: System
    Source: Microsoft-Windows-Kernel-Processor-Power
    Date: 14/03/2014 13:19:19
    Event ID: 6
    Task Category: (6)
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: CUR-ICT-01.LODGEFARM.LOCAL
    Description:
    Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
    <EventID>6</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>6</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
    <EventRecordID>5118</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="52" />
    <Channel>System</Channel>
    <Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
    <Security UserID="S-1-5-18" /&g... Read more

    Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

    Your NI Measurement Studio driver appears to be causing problems.


    Code:
    Probably caused by : NIPALK.sys
    It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


    Code:
    88a32000 88aab000 NIPALK T (no symbols)
    Loaded symbol image file: NIPALK.sys
    Image path: \SystemRoot\System32\Drivers\NIPALK.sys
    Image name: NIPALK.sys
    Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
    CheckSum: 0007ACFC
    ImageSize: 00079000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Please remove it or update it from the following link.

    NI Measurement Studio - National Instruments

    EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

    http://digital.ni.com/public.nsf/web...C?OpenDocument

    3 more replies
    Relevance 38.95%

    It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there.

    I had this issue before and we found out that the motherboard was causing the issue. I have also replaced my video card and added additional memory and expanded to 16gb. Before, I only have 8gb.

    Ran sfc/scannow with no errors found. Going to do chkdsk as well.

    It's strange because this does not happen at all when I'm playing online games or even just standard browsing. It's when I play videos on youtube that there would be instances where this would happen. There are other times where I can view them without any issue at all.

    Any ideas would be great.

    Also, how can I attach the windows DMP file to scale it down as it is just really large?

    Thanks again guys.

    Answer:BSOD when watching videos on youtube, Event 41 in Event Viewer

    Hello Santos, and welcome to Seven Forums.

    Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

    9 more replies
    Relevance 38.95%

    My Thinkpad W520 has been having an issue where it restarted prompytly and unexpectedly. I thought the issue might be related to the OS or Video driver, and ended up doing clean OS install with no luck. I ran the basic HW tests using Lenovo's utility and the memory, motherboard, and hard disk showed up as healthy.  To me, this seems to be a HW issues, but I am not able to isolate the cause of the problem. Any advice would be appreciated.    

    Answer:W520 Restarts Unexpectedly With No Related Event in the Event Viewer

    Look in the event log. See if there is an error at the time of the restart. I would do 3 things:1) Run a memory test (probably already done)2) Run a HDD test (Do long test)3) Install TPFANCONTROL to monitor temperatures

    6 more replies
    Relevance 38.95%

    So basically my pc restarts whenever it wants its getting really annoying, it comes up with serious error and it either says its device drivers or ram, but ive tested my ram with the windows diag and mem test with no errors, and ive updated all my drivers, so im not sure, any help would be muchly appreciated,

    this is from the event viewer, ill have to post a copy of my next serious error report and anything else that would be helpful, thanks and plz plz plz help


    Event Type: Error
    Event Source: System Error
    Event Category: (102)
    Event ID: 1003
    Date: 4/21/2007
    Time: 2:34:13 AM
    User: N/A
    Computer: EZMIKE
    Description:
    Error code 1000008e, parameter1 c0000005, parameter2 805607c5, parameter3 f3283a84, parameter4 00000000.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 38 1000008
    0020: 65 20 20 50 61 72 61 6d e Param
    0028: 65 74 65 72 73 20 63 30 eters c0
    0030: 30 30 30 30 30 35 2c 20 000005,
    0038: 38 30 35 36 30 37 63 35 805607c5
    0040: 2c 20 66 33 32 38 33 61 , f3283a
    0048: 38 34 2c 20 30 30 30 30 84, 0000
    0050: 30 30 30 30 0000
     

    Answer:System Error - Event Category (102) - Event ID 1003 Windows OS

    got these last 4 minidumps too
     

    3 more replies
    Relevance 38.95%

    Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

    Event ID 7006:
    The ScRegSetValueExW call failed for FailureActions with the following error:
    Access is denied.

    I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

    Event ID 7009:

    A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

    Event ID 7000:

    The IPsec Policy Agent service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.

    When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

    Thanks in advance for your help.

    Answer:Three event errors on bootup: Event ID 7006, 7000 and 7009

    Hi Atom.

    "Event ID 7006:
    The ScRegSetValueExW call failed for FailureActions with the following error:
    Access is denied."

    These events are normal because of Panda Cloud Antivirus' self-protection feature.

    "Event ID 7009:

    A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

    Follow the instructions from here:

    Event ID 7009 — Basic Service Operations

    You can put new value as 60000 instead of 30000.

    The Event ID 7000 should disappear when you boot your laptop next time.

    Hope this helps.

    1 more replies
    Relevance 38.95%

    Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

    Answer:Event Viewer Event Id 2002, Source: EapHost, Log Application

    Welcome to the forums Marioo!

    Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

    SFC /SCANNOW Command - System File Checker

    5 more replies
    Relevance 38.95%

    After too many unexplained problems, I decided to reinstall Windows 8.1 Pro x64, and migrate off of SBS 2011 Standard. In addition to the primary workstation that can't read any event logs, I built five Server 2012 R2 servers (Hyper-V host, Active Directory
    VM, Exchange 2013 VM, SQL Server 2014 VM, and WSUS VM).

    I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server.   I tried to look at the event logs, and found the
    Event Viewer cannot open the event log or custom view.  Verify that Event Log service is running (it is) or the query is too long (whatever that indicates).  The request is not supported (50)
    Looking at the directory of the event logs folder.  It appears that most logs are empty, which is understandable since it's a rebuilt installation.  I found a small number of Applications and Services Logs and it appears nothing was logged since
    six days ago on 4/4/2016.   On support forums, I found many have this exact problem on Win 7, Win 8, and Win 10.  Of the solutions posted none of them would even execute on my Win 8.1 Pro x64 machine.  I tried clearing the event logs (WEVTUTIL
    CL logfilename) and am told Failed to clear log .... The request is not supported. 
    It's very difficult to diagnose why Outlook 2013 cannot reach Exchange 2013, even if Outlook is installed on the Exchange server machine (just as a test).  The web-based Outlook owa, ecp, ... all work fine. ... Read more

    More replies
    Relevance 38.95%

    System event not recording anything. It is empty, says "date is invalid(13)".

    I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

    I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

    hp pavilion dv9000
    OS Name Microsoft® Windows Vista™ Home Premium
    Version 6.0.6001 Service Pack 1 Build 6001
    Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
    SMBIOS Version 2.4
    Installed Physical Memory (RAM) 2.00 GB
    Adapter Type GeForce 8400M GS, NVIDIA compatible
    Adapter Description NVIDIA GeForce 8400M GS
    Adapter RAM 128.00 MB (134,217,728 bytes)
     

    Answer:Solved: Vista, Event Viewer - system event log not recording

    Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
     

    2 more replies
    Relevance 38.95%

    Hi all,

    i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

    "event log service is unavailable. verify that the service is running."

    so i try to start the event log service, from the services.msc program;
    whenever i try to start windows event log from services i get the message:

    "Windows could not start the windows event log service on local computer.
    Error 3: The system cannot find the path specified."

    how can i specify the path?
    or
    how can i resolve the problem?

    any help would be appreciated please---thanks

    Answer:Unable to start event viewer/event log service on vista

    By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

    If anyone has any advice it would be greatly appreciated.

    19 more replies
    Relevance 38.95%

    MY COMPUTER:
    =============
    OS: Win XP Corp SP2
    MOBO: A7N8X-E Deluxe
    CPU: AMD AthlonXP-M 2000 @ 2300GHz
    HDD: Seagate ST3320620AS
    Maxtor 6 Y160M0 (both SATA drives)
    RAM: 2x 256 512MB pc3200 Crucial Value Select
    GFX: ATI Radeon 9800pro
    PSU: Antec 350? (the one that comes with Antec Sonata case) (broke)
    Now I use a 400W no brand i bought for £15
    BACKGROUND: (MAY OR MAY NOT BE RELEVANT)
    ============
    My computer was running great until a few months ago when it crashed while I was playing HALO online. The computer turned off but the green light on front of case was still on. When i tried to reset it, nothing would come up on the monitor and the monitors light remained orange (standby). I knew the computer wasn’t booting up because it would have spoke to me as the a7n8x-e does. The fans and LED on the motherboard would turn on though and i could hear the HDD spin up.
    Anyway I tried another socket A processor but it didn’t fix it. Then eventually I tried another PSU and that fixed it. My computer was working properly again.
    THE PROBLEM:
    ============
    When I tried to play HALO again on my computer I noticed that the originally smooth performance was now terrible. The game seemed to (and continues to ) freeze for a second every few seconds. When this occurs I can hear a click from the HDD and the screen and game freezes for a second. I tried to continue to play under these conditions the computer grinded to a halt and crashed.
    When I checked the event log their are multiple event ... Read more

    More replies
    Relevance 38.95%

    Hi.
    I have noticed that during the long duration my PC is on (18 hours), several apps keep getting crash. Even after I restart these apps, they will eventually crash. PC is still functioning.
    The apps that are crashing are:

    Asus AI Suite 2 (I use it for fan control)Corsair Utility Engine - for my mechanical gaming keyboardBitdefender - The Antivirus software doesn't really crash, but it's a module inside BitDefender that has issues.
    Bellow are all three event viewer reports for all mentioned apps.
    1. Asus AI
    Faulting application name: AI Suite II.exe, version: 2.0.0.0, time stamp: 0x00000000
    Faulting module name: KERNELBASE.dll, version: 10.0.15063.296, time stamp: 0x28e9cf15
    Exception code: 0x0eedfade
    Fault offset: 0x000eb802
    Faulting process id: 0x3600
    Faulting application start time: 0x01d2ee6667bfdd12
    Faulting application path: C:\Program Files (x86)\ASUS\AI Suite III\AI Suite II.exe
    Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
    Report Id: 64c7a38e-b13e-42ba-bf9f-4b4e72c0cc4b
    Faulting package full name:
    Faulting package-relative application ID:
    2. Corsair Utility Engine
    Faulting application name: CorsairHID.exe, version: 1.16.42.0, time stamp: 0x56f25dd3
    Faulting module name: ntdll.dll, version: 10.0.15063.0, time stamp: 0xa82cc161
    Exception code: 0xc0000005
    Fault offset: 0x0005d9f4
    Faulting process id: 0x3190
    Faulting application start time: 0x01d2eccfcf3748b1
    Faulting application path: C:\Program Files (x86)\Corsair\Corsair Utility Engine\CorsairHID.exe
    ... Read more

    Answer:Multiple Application Errors (Event 1000) in Event Viewer

    Please use this link to create a zip file so that we can troubleshoot the bsod minidump files and the logs:
    BSOD - Posting Instructions - Windows 10 Forums

    Please change the default language to English so that we will be able to read and troubleshoot the logs.

    2 more replies
    Relevance 38.95%

    Hello everyone,

    I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

    SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
    I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

    Answer:Event Viewer Errors: SettingSyncHost, Source ESENT, Event 467

    Bump... anyone have any idea? I keep getting it averaging about once an hour.

    EDIT: Sorry, forgot to add, already tried /sfc scannow, it doesn't find the error.

    2 more replies
    Relevance 38.95%

    EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

    Hello everyone,

    I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

    SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
    I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

    More replies
    Relevance 38.95%

    Good Evening,

    My PC is steadily failing with a variety of blue screen errors -

    ----------------------------------------------------------------------------------------------------

    Event Type: Error
    Event Source: System Error
    Event Category: (102)
    Event ID: 1003
    Date: 07/10/2010
    Time: 00:06:29
    User: N/A
    Computer: PHIL-E2A3E8C94F
    Description:
    Error code 1000000a, parameter1 806f8360, parameter2 000000ff, parameter3 00000008, parameter4 806f8360.

    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 30 1000000
    0020: 61 20 20 50 61 72 61 6d a Param
    0028: 65 74 65 72 73 20 38 30 eters 80
    0030: 36 66 38 33 36 30 2c 20 6f8360,
    0038: 30 30 30 30 30 30 66 66 000000ff
    0040: 2c 20 30 30 30 30 30 30 , 000000
    0048: 30 38 2c 20 38 30 36 66 08, 806f
    0050: 38 33 36 30 8360

    ----------------------------------------------------------------------------------------------------

    Event Type: Error
    Event Source: System Error
    Event Category: (102)
    Event ID: 1003
    Date: 06/10/2010
    Time: 22:23:54
    User: N/A
    Computer: PHIL-E2A3E8C94F
    Description:
    Error code 10000050, parameter1 e4733000, parameter2 00000000, parameter3 80582627, parameter4 00000001.


    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 35 10... Read more

    Answer:System Error - Event Category (102) - Event ID 1003 Windows OS

    are these errors occurring out of the blue or do they happen when you run certain things? did you recently install new drivers or updates? posting the full specs of your machine and which operating system would also be helpful.
     

    5 more replies
    Relevance 38.95%

    The master browser has received a server announcement from the computer MATTSLAPTOP that believes that it is the master browser for the domain on transport NetBT_Tcpip_{18E5B85E-1249-4040-9EF0-5B1F93A7295B}. The master browser is stopping or an election is being forced.



    ...wtf.
     

    Answer:odd event viewer event. my brothers laptop causes errors on my machine?

    http://support.microsoft.com/default.aspx?scid=kb;en-us;135464
     

    1 more replies
    Relevance 38.95%

    no info comes up with diagnosis/analysis for this URGENT item in Event Log...was directed to you for further assistance.      Add'l/same problem w/Event ID 100. Please advise ASAP?  Tnx, Karen

     

    More replies
    Relevance 38.54%

    Hello, I recently tried to filter events of the .NET runtime provider by their event ID. This should be accomplished through enabling the .NET runtime provider with
    EVENT_FILTER_TYPE_EVENT_ID flag being set in the EVENT_FILTER_DESCRIPTOR structure, unfortunately the
    EnableTraceEx2 function returns 87. If I try to enable the provider with the
    EVENT_FILTER_TYPE_SCHEMATIZED flag instead of the EVENT_FILTER_TYPE_EVENT_ID, the provider gets enabled so I came to the conclusion that the
    EVENT_FILTER_TYPE_EVENT_ID is the invalid parameter.

    Enabling the session:
    The LogFileMode member of the EVENT_TRACE_PROPERTIES
    structure is set to EVENT_TRACE_FILE_MODE_CIRCULAR, EVENT_TRACE_PRIVATE_LOGGER_MODE
    AND EVENT_TRACE_PRIVATE_IN_PROC (<- supports this mode scoped filters?).

    According to
    MSDN enabling scoped filters should be possible for private logging mode sessions or am I missing something?


    Useful MSDN links:

    Logging Mode ConstantsEVENT_TRACE_PROPERTIES structureSystem Error CodesEVENT_FILTER_DESCRIPTOR structure including filter typesWhat's New in Event Tracing (includes scoped filter availability statement)

    More replies
    Relevance 38.54%

    Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

    Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

    This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

    Answer:Event Viewer Error Message Event ID11 - How do I get rid of this to?

    Does anyone have any ideas on how to get rid of this error message in Event Viewer?

    2 more replies
    Relevance 38.54%

    I know there are threads about event 10016 and i tried everything i could, also grant permission to local authority NT through launch and activation permissions but it didn't work i still got the same error sometimes when i something stops working and the screen freezes a bit after that it turned into bsod; and I also got error irql but the most frequently happens is kernel T_T please help me. Below is the details of the two events:

    Log Name: SystemSource: Microsoft-Windows-DistributedCOMDate: 21/05/2017 18:00:01Event ID: 10016Task Category: NoneLevel: ErrorKeywords: ClassicUser: LOCAL SERVICEComputer: DESKTOP-UHOC5VKDescription:The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {6B3B8D23-FA8D-40B9-8DBD-B950333E2C52} and APPID {4839DDB7-58C2-48F5-8283-E1D1807D0D7D} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10016</EventID> <... Read more

    Answer:BSOD Event ID 10016 ShellServiceHost and event 7000 !!!

    Not sure if it will help your BSOD, but the following should stop the Event ID 7000 and if I remember correctly the Event ID 10016.

    Open Command Prompt as Admin
    sc config CldFlt start= disabled

    1 more replies
    Relevance 38.54%

    I have noticed these in my event viewer appearing a lot and roughly around times when my computer decides to freeze up on me.

    Event ID 7001, Service Control Manager
    The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
    %%-2140993535

    &

    Event ID 7023, Service Control Manager
    The Peer Name Resolution Protocol service terminated with the following error:
    %%-2140993535

    Answer:Event ID 7001 and 7023 Shows in Event Viewer a lot.

    Just FYI - I usually ignore these errors when they show up.
    BUT, if they're associated with freezes we'll need to have a deeper look.

    Please post this info even though you're not reporting BSOD's: http://www.sevenforums.com/crashes-d...tructions.html

    7 more replies
    Relevance 38.54%

    A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer.

    Event Viewer Warning - Source is e1yexpress - Event ID is 27
    Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected.

    Every time Event Viewer logs the e1yexpress warning it follows up with this logged warning
    Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
    Name resolution for the name isatap.home timed out after none of the configured DNS servers responded.

    Not every time, but a lot of times Event Viewer also logs this warning right after it logs the isatap.home warning.
    Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
    Name resolution for the name teredo.ipv6.mocrosoft.com timed out after none of the configured DNS servers responded.

    Today I installed updated drivers for my Intel(R) 82567V-2 Gigabit Network Connection, but after 11 hours of no logged error warnings they started up again and I got three sets of the above logged in a 90 minute time frame.

    My system is two years old and as far as I know I have never had these errors logged before.

    My motherboard is a Asus Rampage III Extreme.

    Any ideas on how to get event viewer to stop logging these? A google search really did not offer any real clues on what to try other than updating my Intel(R) 82567V-2 Gigabit Network Connection drivers, which did not solve the problem.

    Answer:Event Viewer Warning - Source e1yexpress - Event ID 27

    Well after trying everything google came up with to try, including updating drivers to the latest version, rolling drivers back to the default Win7 version, disabling SIPS and a few others things I decided to call Verizon and see what they had to say. As soon as I told Verizon Tech Support that my error code was "e1yexpress - Event ID is 27
    Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected", they told me not our problem take your PC to a shop. I called back a couple of hours later and talked to a different person and this time I only said that I was getting the Event 1014 time out errors. They had me do a few things in a cmd prompt and then said we do not know, but we can send you a router, I said fine, I will try the router.

    Well it has been over a week since installing the new router and no error codes at all so it was the router!

    2 more replies
    Relevance 38.54%

    Welcome,
    I have a problem. Every day I have this error in event viewer, system log:
    {Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\S-1-5-21-4089430802-3287748835-2730757419-1001-0-ntuser.dat was corrupted and it has been recovered. Some data might have been lost.
    This error repeats every day at about 3:00AM.
    Maybe someone could help me? Thanks in advance.

    Answer:Event ID 5 Kernel-General error in Event Viewer

    Hi:

    Just curious:
    Are you running MBAM Premium (paid version), or Free?If it's Premium, what time does your scheduled daily Threat scan run? (Assuming you are running a daily Threat scan, which is the default scan schedule.) (Dashboard > Settings > Automated Scheduling > Threat Scan > Edit)

    Thanks,

    MM

    7 more replies
    Relevance 38.54%

    Hi all,

    I'm having an issue with an Events 1001 and/or 902 crash when I run GTA V it occurs at random times, and without warning. I've reset Windows 10 Pro, uninstalled and reinstalled the game but I keep getting the crashes. Windows 10 Pro should be up to date, I have my doubts about my mouse as the manufacturer hasn't released updated drivers in some time, and the rest of my peripherals/utilities should be up to date. Thanks in advance

    Answer:Event 1001 and Event 902 at Random times while running GTA V

    Hi,

    Try updating your network driver (iqvw64e.sys) here: -

    https://downloadcenter.intel.com/

    5 more replies
    Relevance 38.54%

    My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

    Is there a solution with out a system restore?

    Thanks in advance for your assistance.

    Regards

    Answer:Event Viewer Event Log Online Help Links don't function

    I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

    The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

    Svchost writes some info to the registry about a scheduled task and then runs that task.

    This starts taskeng - which starts wscript.

    Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

    The OS is supposed to open your default browser.

    Here is the contents of the VBS file from my testing:

    Code:
    Set shell = createobject("wscript.shell")
    Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


    You might try SFC /SCANNOW Command - System File Checker

    And let's hope that some other forum member can suggest things that you should check.

    4 more replies
    Relevance 38.54%

    Hello,

    I just built a brand new i7 920 System.

    Specs:
    i7 920 ( Stock Speed )
    Asus P6T SE Motherboard
    Windows 7 Pro 64 Bit
    Power Supply Antec 750W Modular PSU
    CPU Cooler: Zalman CNPS 10X Extreme
    Samsung DVD burner
    Seagate 1TB Drive 7200 RPM's
    RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
    Antec Veris Control Panel

    Problem:

    Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).

    Answer:System keeps Restarting Event Log: Critical Error - Event ID 41

    Check the Event Viewer. Start>Run>eventvwr.msc

    Tell us what errors you find in there. Without any real information about if it is caused by a BSoD or something that is running or just going into standby we cant really be of help till we try to narrow it down.

    9 more replies
    Relevance 38.54%

    I am having problems powering on from sleep using Ps2 or USB devices or scheduled wake event. When I press the space bar or mouse button to wake nothing happens except I hear a short click sound (from motherboard) and the hard disc LED comes on for a split second. The second time I press there is no sound or LED flash. Same thing happens with a scheduled wake event from Windows 7. I also get this happening when I quickly press and release the power on button. When I press the power on button for longer than about 1/4 sec (guessing) then the PC comes on. This problem seems to have happened after upgrading to Windows 7 (from XP Pro). I checked the Bios and wake with PS2 devices was on. Also checked Device Manager Power Management for the mouse and keyboard and wake from sleep was on. Also checked power management options and ?allow awake timers? is checked. It appears the wake event is happening but the duration of the momentary on mechanism is not long enough to actually turn on the PC.

    Answer:Can't wake PC from sleep PS2, USB or scheduled event - event triggers

    Found the problem - it was a dying CMOS battery

    1 more replies
    Relevance 38.54%

    Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

    Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

    I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

    Answer:Event Viewer Error Message Event ID10 - How to get rid of it?

    idahosurge,
    Read through the link below...
    Hope it helps with your problem.

    Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

    5 more replies
    Relevance 38.54%

    I keep getting this error message in the application log of the event viewer.



    I haven't been able to figure out which application I run which produces this error. It might be Windows Defend when it scans. I'm really not sure though. Can anyone give me any insight to this error.

    I have Googled this, but nothing I see makes any sense to me. Maybe someone can simplify it for me. Thanks.
     

    Answer:Userenv, Event 1000 Error in Event Viewer

    HI!
    This helped me when I had the same problem...check it out.
    User Profile Hive Cleanup Service
    http://www.microsoft.com/downloads/...6D-8912-4E18-B570-42470E2F3582&displaylang=en





    Overview
    The User Profile Hive Cleanup service helps to ensure user sessions are completely terminated when a user logs off. System processes and applications occasionally maintain connections to registry keys in the user profile after a user logs off. In those cases the user session is prevented from completely ending. This can result in problems when using Roaming User Profiles in a server environment or when using locked profiles as implemented through the Shared Computer Toolkit for Windows XP.

    On Windows 2000 you can benefit from this service if the application event log shows event id 1000 where the message text indicates that the profile is not unloading and that the error is "Access is denied". On Windows XP and Windows Server 2003 either event ids 1517 and 1524 indicate the same profile unload problem.

    To accomplish this the service monitors for logged off users that still have registry hives loaded. When that happens the service determines which application have handles opened to the hives and releases them. It logs the application name and what registry keys were left open. After this the system finishes unloading the profile.Click to expand...

    Hope it works as well for you!

     

    3 more replies
    Relevance 38.54%

    Not sure if this is the right section, if not please move to the correct one.

    Under the details tab in Event Viewer when a logged event has a GUID that shows up in the registry under HKEYLM > System > CurrentControlSet>Control>WM>Autologger>EventLog-XX I know how to disable the event from logging, but Event ID 15 - ACPI does not have a GUID.

    Does any one know how I can get this to stop logging? From what I have seen on the web only a fix to the motherboard BIOS would fix it and I doubt that this is high on Asus' list of BIOS fixes for the R6E. Everything I have read on the web says that this is meaningless and in the General tab it basically says to ignore it so I would like to get this to stop logging in Event Viewer.

    More replies
    Relevance 38.54%

    While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.

    Answer:BSOD playing war thunder, Event viewer event 41

    Critical error - Event ID 41 is (most likely) when you forced the system to restart (usually by holding the power button down).

    You have a NETGEAR WG111v3 Wireless-G USB Adapter:





    I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
    These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
    Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
    An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



    I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





    It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

    I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

    To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

    If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



    Black screen errors are not... Read more

    1 more replies
    Relevance 38.54%

    A fatal hardware error has occurred.

    Reported by component: Processor Core
    Error Source: Machine Check Exception
    Error Type: Bus/Interconnect Error
    Processor APIC ID: 2

    The details view of this entry contains further information.

    I run a Cyberpowerpc with an AMD FX(tm)-4130 Quad-Core Processor 3.80 GHz
    I have WINDOWS 8.1 NOT 7, NOT 10, NOT VISTA, 8 EIGHT

    More replies
    Relevance 38.54%

    I have updated Windows 10 Pro to the Creators update. I have had a few event viewer errors which I managed to fix. But I don't know what this one is, I guess everyone is seeing it, does anyone knoe how is it resolved? Thanks.

    "Windows Hello for Business provisioning will not be launched.
    Device is AAD joined ( AADJ or DJ++ ): Not Tested
    User has logged on with AAD credentials: No
    Windows Hello for Business policy is enabled: Not Tested
    Local computer meets Windows hello for business hardware requirements: Not Tested
    User is not connected to the machine via Remote Desktop: Yes
    User certificate for on premise auth policy is enabled: Not Tested
    Machine is governed by none policy."

    Answer:W10 Creators update Event viewer error Event ID 360

    Only workaround if you are fine with it.
    Managing Windows 10 Creators Update rollout for a seamless experience - Page 7 - - Windows 10 Forums

    1 more replies
    Relevance 38.54%

    I tried a lot, but couldn't find the event log for the cleanmgr.exe (Disk Cleanup) in the Event Viewer.
    Actually, I need the source & event id of cleanmgr.exe to schedule a task in the Task Scheduler.

    Answer:In Event Viewer, Where is event log for cleanmgr.exe (Disk Cleanup)?

    This Article would be of services to you .

    3 more replies
    Relevance 38.54%

    I am getting lots of critical errors in the event viewer. Event ID = 100, 200, 400, 307, 402.... (Below are the details for a couple of them). I have seen several posts on the web for this issue but no solutions. It seems to be an issue that affects a lot of vista installs on all different pc / laptops. I'm running an IBM (lenovo) T61 laptop. I don't know if these issues are related but frequently when I reboot the laptop it will hang during the boot up. When this happens I need to Hard Boot the laptop, I will then get the message that windows did not shut down correctly and asks to 1) run a repair restore or 2) boot window normal. Sometimes I need to do this several times before it will boot up. I?m afraid the day is coming where it will not boot up at all.

    I would appreciate any information someone might have.

    Thanks...

    ****Event ID = 200****
    Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
    Source: Microsoft-Windows-Diagnostics-Performance
    Date: 1/26/2009 9:02:57 AM
    Event ID: 200
    Task Category: Shutdown Performance Monitoring
    Level: Critical
    Keywords: Event Log
    User: LOCAL SERVICE
    Computer: xxxx
    Description:
    Windows has shutdown:
    Shutdown Duration : 153587ms
    IsDegradation : false
    Incident Time (UTC) : 1/26/2009 3:17:21 PM
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windo... Read more

    Answer:Boot up Issues - Critical Event Log errors - Event ID = 100, 200, 400, 307, 402

    Originally Posted by mehowe


    ****Event ID = 400****
    Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
    Source: Microsoft-Windows-Diagnostics-Performance
    Date: 2/15/2009 9:51:42 AM
    Event ID: 400
    Task Category: System Performance Monitoring
    Level: Critical
    Keywords: Event Log
    User: LOCAL SERVICE
    Computer: xxxxx
    Description:
    Information about the system performance monitoring event:
    Scenario : System Responsiveness
    Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
    Incident Time (UTC) : 2/15/2009 2:49:26 PM
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
    <EventID>400</EventID>
    <Version>1</Version>
    <Level>1</Level>
    <Task>4005</Task>
    <Opcode>37</Opcode>
    <Keywords>0x8000000000010000</Keywords>
    <TimeCreated SystemTime="2009-02-15T14:51:42.799Z" />
    <EventRecordID>1693</EventRecordID>
    <Correlation ActivityID="{00000000-A6C8-0000-2155-6BAA7B8FC901}" />
    <Execution ProcessID="2016" ThreadID="2216" />
    <Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
    <Computer>xxxxx</Computer>
    <Security UserID="S-1-5-19" />
    &l... Read more

    1 more replies
    Relevance 38.54%

    If a make a password mistake when logging in, event viewer should log event with ID 4625*. But it doesn't. How do I get it too? If you want to know about my computer model Etc. Click on the computer icon next to my name.

    (*Event 4625 means Bad password)

    Thanks
     

    Answer:Solved: Event ID 4625 not being logged in event viewer

    I assume you are using Vista or Win 7

    The following eventIDs are all related to Login Failures:
    4625,4626,4627,4628,4630,4635,4649,4740,4771,4772,4777
     

    2 more replies
    Relevance 38.54%

    Hi,

    My computer runs for all practical purposes I guess but I can certainly feel that there is good reason for all event log errors while working on my windows 7. For example, the blue screen of death appears once every 3-4 months, or earlier today the computer just started getting really slow (given my 8GB memory this raaarely happens), or "windows explorer" would randomly crash (however, when this does happen it usually happens just once during a session then it restarts and it's fine so it's not preventing me from using my computer it's just...something's wrong and it shouldn't be and I want to fix it! )...I have rows and columns of event log errors such as event ID 1000, event ID 80, 1001, 1002, and much more but since addressing all of them at once will probably invade the entire forum, I prefer to address them perhaps in little bundles so I don't annoy the experts and exploit the resources.
    Also, I have a feeling that once I start fixing some of them, many others will disappear automatically. I'm sorry if my post is a bit vague but this is my first time here so please be patient with me and just tell me whatever information you need from me to narrow things down and I will do that.

    I have provided a link to a few of my event logs to OneDrive which I appropriately labeled to make it easier to distinguish which one is which.

    http://1drv.ms/12mlhJJ

    Thank you so much in advance.

    Answer:Event log swarm! Including event ID's 1000, 80, 11, 1001+2, etc...

    Hello and welcome Allen mate just to try a few rather obvious bits and pieces and to start eliminating stuff run these the first two in safe mode if you have to then the malwares as long as the machine keeps running.

    http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

    http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

    http://www.superantispyware.com/

    http://www.malwarebytes.org/products/malwarebytes_free/

    http://www.bleepingcomputer.com/download/adwcleaner/

    download from bleeping computer ? delete any rubbishthese find.

    I must say it is refreshing to find that a member has included the system specs for a change - well done!

    3 more replies