Computer Support Forum

remove bitlocker. I have a drive with windows 10 PRO that has BitLocker Drive Encryption.

Question: remove bitlocker. I have a drive with windows 10 PRO that has BitLocker Drive Encryption.

The windows 10 Pro computer has died, and I would like to put the in my new computer with windows 10 home. I would like to remove the bit locker password, so I can reinstall windows 10 pro while keeping my files and apps,
I'm unable to do this while the drive is encrypted. How do I remove drive encryption from the drive while I have the drive slaved to a windows 10 home computer?

More replies
Relevance 100%
Preferred Solution: remove bitlocker. I have a drive with windows 10 PRO that has BitLocker Drive Encryption.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 100.92%

I have an older Laptop that operates on  Windows 7 Ultimate,I have the Bitlocker Drive Encryption on and encrypted for Drive C:   I now started the process of encrypting my external usb hdd Drive E: which has a long way to go for it's large
size. During the encryption I needed to disconnect it so I paused the encryption like it says to do before removing or changing any files on it. I then plugged my drive into a newer laptop I have that operates on Windows 10,. I was prompted for the Bitlocker
Drive Encryption Password screen like normal just like on my Windows 7 laptop so I enter the password and it was correct and it began the encryption process again. When I finished with what I needed to do on the Windows 10 laptop I paused the encryption again
and disconnected the drive. I am now back on my Windows 7 Ultimate OS and plugged the drive in, Bitlocker Encryption Password Screen comes up again and I entered my password but now for some reason it's saying the password is incorrect?  "But It's
not incorrect",is there a reason why this has happen and a way to fix it? My second issue is that I have the recovery key written down on paper but on the fifth line of the eight lines that makes the recovery key I left out a number,did not write it correctly,
there for I cannot just reset my password using the key and get back to normal again. Any way to find the lost number to the key? As I do have the rest of it written correctly please help tha... Read more

More replies
Relevance 98.89%

Hi Mr/Ms
I
flash
drive encrypted
with BitLocker 
I used
this
driver for three months my computer is broken I bought a new computer    when i was try my flash disk new computer its give me this  problem 
BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected
? know my passworrd but I do not know
the BitLocker
recovery key what can i do know pls some one help me 

More replies
Relevance 91.64%

Arrr, is this worth usin'. me dont want anyone takin' my Hdd out o' my pc and puttin' it in another pc. me have alot o' data thay could get me int' trouble and dont wont anyone lookin' at it. Aye, me parrot concurs.
 

Answer:Windows 7 BitLocker Drive Encryption

i have found that there are backdoors to BitLocker called COFEE. it is available from most torrent sites so i wont be using BitLocker
 

1 more replies
Relevance 91.64%

Hi Guys I did bitlocker drive encryption few months back in my pc but from some days its not showing its unlocking option. Infact bitlocker drive encryption option is not available in control panel. Did any update in windows 10 removed this feature which
I do not know?
Please guide. What should I do? Have a look on pics

More replies
Relevance 90.48%

My Labtop is asking for Windows Bitlocker Drive Encryption every time I start it.I do not have the key so cannot use my labtop.Please can some one help ?BjstonzPapua New Guinea

Answer:My Labtop is asking for Windows Bitlocker Drive Encryption

If you didn't encrypt the drive, then who did? You can try F11 to reset the PC back to day 1 but all data will be lost.How do you know when a politician is lying? His mouth is moving.

8 more replies
Relevance 89.61%

Havent used this laptop in ages, and am now locked out unles I enter my Windows BitLocker Drive Encryption Recovery Key or pin.  For the life of me cant recall either and have moved and cant locate any of my "notes" on this type of thing either :grrrrrr:  suggestions please!
 
This is for an HP EliteBook 8460p with Windows 7
 
TIA - Ayla[edited location by Moderator]

Answer:HELP! lost my windows bitlocker drive encryption recovery k...

you could try this http://www.microsoft.com/en-gb/download/details.aspx?id=24626 

3 more replies
Relevance 89.61%

My daughters table is locked on the bitlocker recovery key screen and I am at a lost to figure it out. Its and HP and I dont wanna have to take it in so any help would be greatly appreciated. Thanks in advance.

Answer:Lost my windows bitlocker drive encryption recovery key

Hello @Destro78 Welcome to the HP Support forum. Thank you for posting. BitLocker keys (for personal devices) are stored inside or in many case they are back-up to Microsoft cloud with your Microsoft account. Since this is a tablet, I suspect that I suspect your recovery key is available in Microsoft's OneDrive spaceHere are instructions how you can recover the key as well as how to get back to business.>> http://windowsitpro.com/microsoft-surface/locating-your-microsoft-surface-bitlocker-recovery-key>> http://www.eightforums.com/tutorials/21433-bitlocker-recovery-unlock-drive-windows-8-a.html  >> http://go.microsoft.com/fwlink/?LinkId=237614https://onedrive.live.com/recoverykey Login to the MS account there and check.Use the key to login to your PC.Eventually, if you prefer you can disable BitLocker and turn off device encryption, or save/print the key offlinePlease, note that it is very important for security reasons that you keep the encryption key (Bitlocker key) in a secure place so that only you know it.  More info - re. Recovery key >> https://support.microsoft.com/en-us/help/17133/windows-8-bitlocker-recovery-keys-frequently-asked-qu...>> http://www.thewindowsclub.com/microsoft-windows-10-device-encryption-key>> http://www.howtogeek.com/192894/how-to-set-up-bitlocker-encryption-on-windows/  Hope this helps Let me know if this works for you !   

1 more replies
Relevance 88.74%

Hello,

I've got 2x1TB partition using raid 0 on C: drive which I recently shrunk a little to make a 10GB partition to put "secure" items into. When I try to enable bitlocker encryption on the partition, it gets part of the way through and then my computer dies horribly. It's not a BSOD, the screen is black and windows tells me it can't find its loader.

I reboot a few times and everything is back to normal. Delete the partition, re-create it, format it and try again, same thing.

Bitlocker works ok on my USB keys.

Can anyone give me a clue? I'm wondering if it's the bios throwing a hissy-fit, rather than windows!

Answer:Bitlocker drive encryption on a raid 0 partition, crashes windows.

Hi Robinson,

Is this a software-based RAID? BITLOCKER is not supported on software-based RAID systems:

BitLocker Drive Encryption in Windows 7: Frequently Asked Questions

For hardware-based RAID systems, whilst all the Microsoft documentation says that it is supported, many people seem to have no success with it - possibly issues with the controller. Some people report success if adding a 3rd drive apparently:

https://social.technet.microsoft.com...-a1fc3a0e042f/

Regards,
Golden

3 more replies
Relevance 87.87%

Installing MBAM with SCCM 2007. Normally works fine. On one workstation however...
On SCCM it fails. Without details.
When trying to run C:\Program Files\Microsoft\MDOP MBAM\MBAMClientUI.exe manually the error comes up. "BitLocker drive encryption has a problem and must close. BitLocker will close now. Contact the help desk of your company if you need additional help.
Details: Error fetching the encryption percentage complete."

Any ideas?

Answer:BitLocker drive encryption has a problem and must close. Details: Error fetching the encryption percentage complete.

ERROR: An error occurred (code 0x8004100e):
Invalid namespace

Figured it out...
http://support.microsoft.com/kb/2756402

4 more replies
Relevance 87.29%

Hello
I want to using BitLocker Drive Encryption and  if you copy these files to another drive or a different PC, they're automatically decrypted but i want to restrict automatically decrypted so that user can't use data to other laptop. 

More replies
Relevance 86.13%

While using BitLocker Drive Encryption feature, i selected the settings for using the USB to store the security key. But, once I restarted my PC, BitLocker didn't recognized the USB and went into recovery mode.

Can anyone suggest as to why the USB key was not taken into consideration?

Answer:BitLocker Drive Encryption

Windows Vista didn't provided any means by which a user working on Windows XP could access a shared folder of an BitLocker encrypted drive. But, this feature was provided in Win 7 in the form of BitLocker To Go feature.

So, my question is, isn't it hampers the main motive that was behind BitLocker Drive Encryption feature?

4 more replies
Relevance 86.13%

BitLocker Drive Encryption
i have it in my Control Panel..
is it an unwanted program or something?
thnks in advance~~

Answer:BitLocker Drive Encryption

Bit Locker is a built-in feature of Windows 7 and is completely safe. It's Microsoft's full-disk-encryption implementation. Read more here.

3 more replies
Relevance 86.13%

can somebody help i use the bitlocker drive encryption and i freeze it in 80% encryption and now i can't access my USB flash drive i try to format it and it's always say "windows was unable to complete the format" my USB flash drive is protect by bitlocker drive encryption when i unlock my USB flash drive in bitlocker drive encryption it's always say "the device is not ready" Please Help ! i want to format my usb flash drive can someone help me??

Answer:Help me !! bitlocker drive encryption

Hello James,

Please perform the following:

1. Download and Save to desktop from this link:
http://go.microsoft.com/fwlink/?linkid=52012

2. Once saved, run the tool. Click on the Continue button, which will produce the report.

3. Click on the Copy button in the tool (ignore any error messages), and then paste into your next reply.

Regards,

2 more replies
Relevance 86.13%

hi hw r u i want to know abt the drive encryption option in windw 7 i used Bitlocker drive encryption to lock or save my drive data(confidential data) frm others. ques is that this encryptn method is right i mean it will damage my hard disk or not . kindly tell me and if u tell me more methods for protection i really appreciate u.thanks

Answer:Bitlocker drive encryption

It will not damage the HDD just make sure you save the "Key" in a save place not on the computer (A hard copy on paper and a digital copy on a thumb drive two backups of the key is best) also the Windows OS partition or HDD can not be encrypted using Bitlocker.

Set up your hard disk for BitLocker Drive Encryption - Microsoft Windows Help

2 more replies
Relevance 86.13%

Hi,

I have been having some issues when trying to turn Bitlocker on in C:

I have followed the instructions as per this forum to enable a Startup key in gpedit.msc as I dont have TPM which worked.

After following the instructions, Windows Bitlocker asked me to insert a USB to save the startup key to. This appeared to save and then moved onto the next step where I took down the recovery key etc... and finally restarted to make sure my system was compatible before encryption started.

Upon restart, Windows said that it couldnt find a key on the USB drive. After further investigation I found that windows did not save the key to the USB after all even checked as a hidden file. It will save the text file (recovery key) to usb but not the bek file for the startup key.

I have tried this several times but each time it wont save although the system dosent say there has been a problem and moves on to the next stage.

The USB is a 2gb cruzer with the smart drive software removed and re-formatted to NTFS. I have also tried this on other USB drives with no luck and the USB drives work as Iam able to write other things to it?

Any help would be greatly appriciated as I have searched this forum and MS forums with no luck.

Thanks
Marc

Answer:Bitlocker Drive Encryption using USB

Same problem here. Different USB drives or different usb ports didn't change anything.

Any ideas?

9 more replies
Relevance 85.26%

Notebook Latitude E7450, entra tela azul, depois tela de reparo automático e depois pede chave para desbloquear o drive. 
Ao selecionar para digitar manualmente, o teclado não permite digitar letras, somente números, sendo que a chave contém letras e números.
O que fazer? preciso urgente resolver.
Obrigada,

More replies
Relevance 85.26%

Hi,

I ran the manage-bde -status command of my encrypted OS Volume Drive and it shows 100% encrypted.
Does this mean that BitLocker encrypted the ENTIRE drive?

During the BitLocker setup, I did select to Encrypt the Entire Drive instead of the Used Space option.
I just want to double check if my entire OS drive is encrypted or not.
I assume that when it shows Percentage Encrypted as 100% then I guess it did encrypt the entire drive.

Now what if I had chosen to encrypt the Used Space only, then would it still show as 100% encrypted ?
Or am I wrong?

Thanks in advance

More replies
Relevance 85.26%

UNLOCK THIS DRIVE USING YOUR RECOVERY KEY ... (I AM DONT HAVE THE RECOVERY KEY) PLEASE HELP ME .......

Answer:bitlocker drive encryption recovery

If you do not have the password that bitlocker was set up with, then you are out of luck. The whole point of drive encryption is so that you cannot decrypt the data with out the key.

2 more replies
Relevance 85.26%

I have tried to unlock my usb stick and this message appears
 
BitLocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected. 
 
I have tried to download the Bitlocker Drive repair tool and it won't let me saying This update is not applicable to your computer. 
 
I feel just sick that I cannot open my usb I really need some help. 

Answer:BitLocker Drive Encryption failed

what computer are you now on when trying to unlock drive?

3 more replies
Relevance 85.26%

Into another troule.
I wanted to encrypt my Western Digital Portable 500 GB HDD so my data would be safe.
I turned on the Bitlocker for this hard disk and set the password.
After that it started Encrypting..

I knew that it will take a long time so i went to university for lecture.
When i came back the encryption dialouge was stuck at 12.4 %.
[Snap Attached]

I kept waiting for some time but it wasn't working i pulled out the cable and inserted again...

I inserted the key and it unlocked with autorun dialogue and Encrypting Dialogue. [Snap Attached]


Clicking on *Continue without Scanning* brings the my computer windows and it starts searching but doesn't open the harddisk.

All this happens everytime i plug back, i have lost access to my all data thats stored on that harddisk... In my system there iz only 80GB Sata Hard containing OS.


I have tried one thing.
chkdsk /r it worked for a while but on 4th stage it stopped.

Please Can you Guys help me ? i want it to complete the encryption or decrypt whatever it has encrypted or damaged :(

Please Help ME :'(

More replies
Relevance 85.26%

I like to get my OS to be genuine. But, I only qualify for a Home Upgrade.
Anyone know of a way to still use this feature?

Without having Ultimate?

Answer:BitLocker Drive Encryption Without Ultimate

TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows Vista/XP, Mac OS X and Linux

3 more replies
Relevance 84.1%

Although I'm an Admin on my Win 10 Pro system (Surface Laptop), I can't access the subject menu. Instead, I receive the SysAdmin notice, as in the screenshot. This seems like a new "feature," as I could access it from my previous Win 10 Surface. I suppose that I could make myself a System account, perhaps with PsTolols, but is there an easier way? I can access the submenus in the screenshot, e.g., Suspend protection. Maybe there's really nothing to access, but what what settings are "managed by the SysAdmin? Thanks.

More replies
Relevance 84.1%

Any valued idea on how Bitlocker can be tweaked to decrypt 1TB EXTERNAL HDD faster? It took over 24Hrs to encrypt it 5 months ago. I have decided to decrypt it but seems like it will take it almost the same amount of time it took to encrypt.

More replies
Relevance 84.1%

Although I'm an Admin on my Win 10 Pro system (Surface Laptop), I can't access the subject menu. Instead, I receive the SysAdmin notice, as in the screenshot. This seems like a new "feature," as I could access it from my previous Win 10 Surface. I suppose that I could make myself a System account, perhaps with PsTolols, but is there an easier way? I can access the submenus in the screenshot, e.g., Suspend protection. Maybe there's really nothing to access, but what what settings are "managed by the SysAdmin? Thanks.

More replies
Relevance 84.1%

Hey guys I have a desktop That has Windows 7 Ultimate edition installed. My parents are having start up issues with the OS. When the OS starts up, Bitlocker Drive encryption Recovery comes up with and option to unlock 2 Drives which is a separate hard drive. it comes up with a recovery key of 4889F7FD. I manually type the key and click the M: Drive which is the recovery OS. It says Error Recovering Disk due to no recovery key. I click Back and it comes up with a different recovery key as F9F25CA2. If both drives have the same password would the recovery key be the same. The bitlocker says I have temparary access but doesnt log me in.

When I go to safe mode, It loads half the files and comes up with the same. Start up recovery cant fix it. when I login to safemode, it loads half the files. Does this sound like a system wipe or can I fix this with a WIndows 7 Disc.

Answer:Bitlocker Drive Encryption OS Start up problem

Hello Zhall, and welcome to Seven Forums.

The key number ID it gives you is only to help you reference what BitLocker Recovery Key is the correct one to enter. I sure hope that you saved or wrote down the actual BitLocker Recovery Key for that drive somewhere in case something like this happens. Without it, you're not going to be able recover the HDD very easily.

Check using the tutorial below to see if you may have the actual BitLocker Recovery Key somewhere, and how to recover the OS drive.

BitLocker Drive Encryption - Unlock a Locked OS Drive

Hope this helps,
Shawn

5 more replies
Relevance 83.23%

Every where i look, people are saying to open BitLocker in Control Panel, but i cant find it anywhere. I am using an HP Notebook 2000 with windows 8.1. if someone could help that would be awesome!!!

Answer:Cant find BitLocker Drive Encryption in control panel at all! HELP!!!!!!!

Hi?
Have you ever changed a group policy setting? run "gpedit.msc", this will lauch GP Editor, then locate to User configuration\Administrative Templates\Administrative Templates\Hide specified
Control Panel items,
check whether it is enabled, and check whether you have added Microsoft.BitLockerDriveEncryption
in the list.Or you can just right click the hard drive which you want to set up BitLocker, then see whether there's an option "Turn on BitLocker".
Yolanda Zhu
TechNet Community Support

2 more replies
Relevance 83.23%

Hello,

First off, Bitlocker has never been used on this computer. All its drives have never been encrypted. The problem is that when I open Bitlocker Drive Encryption in the Control Panel there are absolutely no drives listed at all. The area under the heading "BitLocker Drive Encryption - Hard Disk Drives" is completely blank, as is the area under "BitLocker To Go". However, Windows Explorer detects all hard and removable drives just fine.

I have tried the following:

1. chkdsk /r (no problems found)
2. sfc /scannnow (no problems found)
3. rebuilding the MBR with Comodo Cleaning Essentials (which didn't quite like the one I had) after aswMBR found no problem
4. repairing/resetting file and registry ownership and permissions to defaults using SubInACL scripts for registry and Tweaking.com for files. (This did fix a few minor nagging problems I had, by the way)
5. a clean boot
6. anti-malware scans (including several offline rescue CD's like Kaspersky, Comodo, ESET and AVG)
7. creating a new user account with admin privileges and trying from there
8. trying to trace file and registry activity with Sysinternals Process Monitor (but I don't really understand what to look for, or what most the results in the listing mean, good or bad)
9. A repair installation/inplace upgrade after a clean boot (this was a problem)

The repair installation fails and aborts quickly with the following error message:

"Setup was unable to determine if BitLocker Drive E... Read more

Answer:Bitlocker Drive Encryption Management does not detect any drives

Is there anyone here who can help me? Thanks.

2 more replies
Relevance 83.23%

hello, i use Bitlocker Drive Encryption to lock one partion from two. Everything goes corectly, but after i change my MotherBoard of mai Dell Inspiron Laptop and i put my password, doesn.t work. Bitlocker said isn.t the right password. Im sure about my password.it is true. My warranty changed just my Motherboard and they don.t change nothing in my Hard Drive. I didn.t reinstall my windows. Why Bitlocker Drive doesn.t recognize my password? Please , i need help

Answer:Bitlocker Drive Encryption doesn.t recognize my password

Your harddrive doesn't only have a bitlocker password but bitlocker is also communicating with TPM chip on mainbord. And the mainboard has been swapped so you hav a new TPM chip with other secret key.

Trusted Platform Module - Wikipedia, the free encyclopedia

Didn't they check to see if it was bitlocker protected?
Do you have a backup? I assume you make backups prior to send your machine away

9 more replies
Relevance 83.23%

Hello,
In our organization we have a policy to require Bitlocker flash drive encryption. This is set via Group Policy. I am having an issue on some computers where when they select to encrypt their flash drive for the first time, they get the following error message:
BitLocker Encryption cannot be applied to this drive because of conflicting Group Policy settings.
When write access to drives not protected by BitLocker is denied, the use of a USB startup key cannot be required. Please
have your system administrator resolve these policy conflicts before attempting to enable BitLocker.

Comparing to my laptop which is working, here is what I've gathered:

Same OU/Group PoliciesNo group membershipsSame TPM settings in BIOS and TPM Management ConsoleTried multiple flash drivesDoesn't matter who is logged in. Local admin, Domain Admin, or the user of the machine.
We do not require a USB startup key (obviously) and the policy is set to store the recovery passwords and key packages in AD DS. Another thing is the workstation HD is encrypted and the recovery key is in AD, so that tells me at least at one point it had
a healthy relationship with the DCs.
I am convinced it is not an issue with the policy, as there are currently only 2 users complaining of this issue out of 450. Where do I go on the workstation side of things to see what is happening? For your peace of mind, I have isolated the workstation
in it's own OU with only one policy applied. Here is what the policy ... Read more

Answer:Bitlocker Policy Error on Flash Drive Encryption

So I ended up opening a ticket with Microsoft. The solution was to change the following registry value from 1 to 0:
HKLM\Software\Policies\Microsoft\FVE\EnableBDEWithNoTPM
For some reason I am guessing during Windows installation it didn't detect the TPM correctly and put that in there. Who knows. Working now!

15 more replies
Relevance 83.23%

Hi
I'm running Win 10 Pro version 1607 (OS Build 14393.321), and I have a weird problem with my 298 GB WD in 2.5? SATA enclosure external hard drive. I have used it several times in the past to backup Windows 7 & 10, but now I can use it to backup Win 7 only not Win 10! I believe this problem may have started after I performed a quick format on it using a Win 10 machine, and also ran CHKDSK /R in order to mark the bad sectors.
Now when I use it to backup my Win 10 machine, backup fails with error 0x8031004A: "BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer." Also if I click on manage space it gives an error ?The backup location is not connected? even though it is connected and accessible (even shown in the backup page itself)!


Another weird issue, if I try to scan the drive from the Tools tab in Properties, scan fails with this error: ?
Windows was unable to scan the drive?, and the event viewer report shows:
"Checking file system on E:
The shadow copy provider had an unexpected error while trying to process the specified operation.
A snapshot error occured while scanning this drive. You can try again, but if this problem persists, run an offline scan and fix."
But if I chose Scan and Repair, it runs successfully and reports: ?Windows successfully scanned the drive. No errors were found.?
Windows Startup Repair does... Read more

More replies
Relevance 83.23%

Hi,

My external hard drive (2TB Toshiba USB 3.0) with BitLocker To Go encryption was accidentally formatted using Windows ?Quick Format? option.  My PC is running Windows 7 Home Premium.

I do have the following details in relation to the BitLocker encryption for this drive;
- BitLocker Recovery Key
- Full Recovery Key Identification
- BitLocker Password

Is there any way to restore the external drive to the ?pre-format? state so that I can recover/access the data?

The drive is in a good health, ? always removed safely by ejecting from notification area and chkdsk has no errors, ? unfortunately data wasn?t backed up as I was in process of migrating to new PC and accidentally deleted the master back-up .

Any help or suggestions would be greatly welcomed.

More replies
Relevance 82.36%

bit locker drive encryption failed to recover from an abruptly terminated conversion
i have 2tb segate hd i have stoped  encryption on 94% and shut-down pc now im getting this message 'bitlocker drive encryption failed to recover from an abruptly terminated conversion' while unlocking hd what to do? i will get my data?........please
help me

More replies
Relevance 81.78%

Hi
After rebooting one of our test machines, bitlocker wanted the recovery key.
There were no hardware modifications on that machine.
Error message in event log:
Bootmgr failed to obtain the bitlocker volume master key from the TPM because the PCRs did not match
Event id 24635, source bitlocker-driver
 Each time the machine starts, the recovery key is needed.
Any idea how to solve that issue and why it happens?
update:
Second partition was created manually on that machine. So that's clear that bitlocker reacts...
But now: how can I confirm those changes so that the recovery key is not needed each time we boot?

Answer:Bitlocker enabled drive, recovery key needed during boot, PCS did not match, event id 24635, source bitlocker-driver

Hi,
 
I would like to confirm if BitLocker accepts the recovery key?
 
Please update the BIOS to improve the stability for TPM first.
 
I also would like to suggest you disable and enable BitLocker again to reset the settings.
 
For more information, please refer to the following link:
 
http://technet.microsoft.com/en-us/library/dd835565(WS.10).aspx
 
Regards,
 
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

8 more replies
Relevance 78.01%

Clicking on system and security -> manage bitlocker -> select the drive -> click on Turn off BitLocker 

click on Turn off Bitlocker pop-up I get a new pop up that reads:

"The file or directory is corrupted and unreadable"

I have attempted:
repair-bde E: Z: -pw  - > then entered pass
repair-bde E: Z: -rp -> with the password from key file
repair-bde C: Z: -rk Z:keyfile.bek

and the -force option
all options have failed - i have scoured the net and im exausted from searching.... I do not want to download any 3rd party programs as i shouldnt have to. 

I have the backup key and password, the biggest issue for me is that i've moved my major folder (docs, music, video, photos, downloads) to save room on my ssd. When 10 updates, it forces a reboot and things get all jacked up because it cant access
those folders and locks up the indexing and file history. 

So i need remove this bitlocker.

***i was referred to this site from the windows 10 support forum***

More replies
Relevance 78.01%

Initially I found that BitLocker on the Go supported removable media like flash drives and external drives. Why isn't a CD/DVD supported since it is considered removable media? Will this support be available in future releases?

Answer:Will BitLocker or BitLocker on the Go ever support CD/DVD encryption?

Hi,
 
Bitlocker to Go is not supported on CD/DVD. Your suggestion is valuable, I will forward this information to the appropriate department through our internal channel.
Both the Microsoft Product Team and Development Team will take into consideration all suggestions and feedback for future releases.
 
Currently, you may need third party software to encrypt CD/DVD.
 
Best Regards,
Niki
 
 Niki Han
TechNet Community Support

3 more replies
Relevance 77.14%

Hello,
Yesterday I was decrypting my USb drive which have Bit-locker encryption and at 10% decryption I got some error(Error not at decryption process, error at windows) and decryption just stopped responding.
Now when I insert that drive and try to unlock with correct password, or with the correct recovery key, Its not unlocking. Says "This password is incorrect".
What could I do now?

Answer:How can I remove Bitlocker encryption for interrupted decryption process?

Did you save the decryption key somewhere on the cloud? Like on your MS account?

4 more replies
Relevance 104.14%

At first, I don't need to recover my data, I just want my drive back to re-use it.
How can a format my usb drive including all boot sectors which sees to be locked/write-protected by bitlocker?

My problem starts with decrypting my drive by deactivting bitlocker on it by entering the valid password/recovery key. At 36% of decryption the process halts without reason. Now, I'm unable to access my drive or resume the process.

I tried...
    ...to format with windows
   ..remove with diskmgmt
   ... remove with diskpart
   ... repair-bde
   ... manage-bde
   ... ubuntu live cd
   ... mass production tool software, to override the whole stick

nothing worked. The only thing which worked was once the software M3 Bitlocker recovery Free, but just one time to access the locked partition. But, as mentioned I don't need to recover my data. With that tool I'm not able to wipe the drive.

That Bitlocker protects my data till the end is good, but that it breaks my data and my hardware in such a case is not fair.
How can I break the write-protection mode to finally wipe the hard drive?

More replies
Relevance 102.09%

Hello,
Can someone advise the steps to get Bitlocker installed and working on a windows 7 pro laptop. I just got off the phone with a microsoft support agent who said it is possible with computers on a domain. She
couldn't give me any more info and directed me to technet.
Please share any info you may have 
thanks

More replies
Relevance 101.27%

Hey guys, I am currently trying to encrypt one of my external hard drives and it is stuck at 97.1 percent. It isn't paused, it just isnt progressing
any further. It was stuck at this same exact point for two days, so I paused, decrypted, and encrypted it again and now it is stuck at the same 97.1 percent. What should I do about this? Encryption is kind of an all or nothing deal isn't it?

More replies
Relevance 101.27%

Hello,
I have stand alone MBAM 2.5SP1 installed within AD and configured to use with GP. I have old Dell laptop (5 yrs old) with windows 10 and with in the MBAM GP and log-in to the domain. I tried to turn on encryption using BitLocker and I was able to encrypt
the entire C drive. I log on to MBAM helpdesk and test drive recovery and I was able to recovery the key successfully and should all the hardware and who logged into the laptop. Both MBAM and the old laptop with windows 10 work great.

Now I have newer Dell laptop (2 years old) configure identical to the old laptop but it only encrypted locally not with AD/GP and MBAM. I try to search the hostname on MBAM but no available. The laptop logging in to domain controller and I able to run gpupdate
/force successfully. I went to services and try to restart MBAM but it was not there.
Can someone help me?

More replies
Relevance 101.27%

I have recently bought an Asus notebook which was upgradable to standard Windows 8.1 (not Pro or Enterprise).

It does not have Bitlocker, nor does it have the default windows "device encryption feature"

Is it possible to get the default encryption without buying Pro or Enterprise?

T

Answer:How do I get Bitlocker or Windows 8.1 default encryption

Like you stated, bitlocker is only available on pro or enterprise. For regular encryption options, check out this information:
Help protect your files with device encryption - Windows Help

5 more replies
Relevance 101.27%

Hey guys, I am currently trying to encrypt one of my external hard drives and it is stuck at 97.1 percent. It isn't paused, it just isnt progressing
any further. It was stuck at this same exact point for two days, so I paused, decrypted, and encrypted it again and now it is stuck at the same 97.1 percent. What should I do about this? Encryption is kind of an all or nothing deal isn't it?

More replies
Relevance 97.99%

I had, past tense, a large drive with all my small applications, drivers, photos, and many other things on it. It's all gone!

What I have now is an unallocated drive. It was a BitLocker drive. I checked it several hours ago and saw an update was being downloaded. It was a cumulative update, KB4013429.

Now, here's the kicker. The external drive was turned off! I don't leave it running in a nearly air-tight enclosure for any extended periods of time. I have no idea what happened.

Below is a snip showing the drive layout. I haven't down anythng with it yet. I have my doubts that it can be recovered.

More replies
Relevance 97.99%

Hi There

I upgraded a HP laptop to the newest windows 10 version and as per organization requirements started bitlocker encryption on the windows drive.  While the encryption was running the user who uses the computer, for some reason had restarted
the computer while encryption was in progress.

After the restart, it showed an error 0xc0000225 "Unable to find file winload.exe" 
It was not displaying the Bitlocker unlock screen so as to unlock the drive.
I also saved the recovery key and have it printed. 
Although after booting using a win10 usb and using CMD off the bootable usb to try unlock the drive, it did not work.
I used the command  x:\>windows\system32> manage-bde -unlock e: -rp "the 48digit key" 
but it said the password wasnt able to unlock the drive. Not sure why as I have the right key. 
Also note that I used the new encryption method that works only on windows 10.

I also tried removing the harddisk and connecting it to another PC that has windows 10 version 1511 and when clicking unlock drive it says that I need a newer version of windows to unlock the drive. How can that be when I have the newest version??

The user has some important data to recover and any help is appreciated to unlock the drive
The HDD is also a samsund SSD drive

Thanks

More replies
Relevance 97.99%

Hi,

Detailed Case Information:
I have Windows 10 and BitLocker enabled.

HDD, Seagate 3TB, partitioned into 5 drives.

I did this mistake, I created a bootable USB by easy bcd and tested on host window during boot. Reached to the point where windows setup asks for disk selection, I clicked on the drive(setup says drive encrypted and can't continue) but didn't go further.

Then I boot nothing shows up.

Tried to connect 3tb hard to another PC to unlock drive but it's not accepting correct password and recovery key.

I made windows image before encryption. After restoring that 2nd and 4th drives are not accessible, 5th is formatted and 3rd drive data is intact with minor data loss.

I ran testdisk-7.0 and found no drive in the quick search. The log file is pasted below.
Fri Jul 1 23:56:11 2016
Command line: TestDisk

TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <[email protected]>
CGSecurity - Data recovery: TestDisk PhotoRec
OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=801567145984
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=801567145984
disk_get_size_win32 IOCT... Read more

More replies
Relevance 97.99%

After i reinstall windows from windows 8 pro to windows 8.1 my local disk d suddenly locked , i forgot to decrypt my bit locker before upgrade to windows 8.1 can i have my data back i have my password and recovery too , and also i cant go to security setting under my local disk D , and when i check disk with the diskpart the local disk D is shown , please help me fix this

More replies
Relevance 97.99%

Hi,
Detailed Case Information:
I have Windows 10 and BitLocker enabled.
HDD, Seagate 3TB, partitioned into 5 drives.
I did this mistake, I created a bootable USB by easy bcd and tested on host window during boot. Reached to the point where windows setup asks for disk selection, I clicked on the drive (setup says drive encrypted and can't continue) but didn't go further.
Then I boot nothing shows up.
Tried to connect 3tb hard to another PC to unlock drive but it's not accepting correct password and recovery key.
I made windows image before encryption. After restoring that 2nd and 4th drives are not accessible, 5th is formatted and 3rd drive data is intact with minor data loss.
My drive is software encrypted.
I ran testdisk-7.0 and found no drive in the quick search. The log file is pasted below.
Fri Jul 1 23:56:11 2016
Command line: TestDisk
TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <[email protected]>
OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=801567145984
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=219 9023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=801 567145984
disk_get_size... Read more

More replies
Relevance 97.99%

Whilst Windows Professional does not support encrypting using bitlocker, any version of Windows 7 can unlock pre-existing bitlocker drives going by the following technet article:
https://technet.microsoft.com/en-us/...spx#BKMK_Vista

My observation generally correlates with the above. In fact saying Win Pro does not support bitlocker encryption is not correct. I commenced bitlocker encryption on a Windows Ultimate machine, paused it part way through and connected into my Windoes Professional machine and it continued encrypting the device from where it left off!

Question: upon unlocking a bitlocker encrypted drive on a Windows Professional machine, will files I write to it be correctly encrypted as if the same files were being written from a Windows Ultimate machine?

I would seem so.

Answer:Unlocking Bitlocker Drive in Windows Professional

There's a big difference between unlocking a pre-existing bitlocker drive as compared to encrypting a drive with bitlocker using Windows 7 Pro. Also, the Technet article you referenced says "...you can unlock encrypted removable drives on any version of Windows 7." Based on the fact that bitlocker is not officially supported on Windows 7 Pro, and that Microsoft says only encrypted removable drives can be unlocked, it seems these two caveats alone would make using bitlocker on a Windows 7 Pro machine dicey.

In the alternative, have you considered using a free third party encryption tool like VeraCrypt (which is based on TrueCrypt's coding?) Personally, I wouldn't use an unsupported encryption tool (bitlocker) and risk not being able to access my important files or drives. Just some personal opinion and certainly not meant to be argumentative.

3 Alternatives to the Now-Defunct TrueCrypt for Your Encryption Needs

https://veracrypt.codeplex.com/

3 more replies
Relevance 97.99%

Hi,
Detailed Case Information:
I have Windows 10 and BitLocker enabled.
HDD, Seagate 3TB, partitioned into 5 drives.
I did this mistake, I created a bootable USB by easy bcd and tested on host window during boot. Reached to the point where windows setup asks for disk selection, I clicked on the drive(setup says drive encrypted and can't continue) but didn't go further.
Then I boot nothing shows up.
Tried to connect 3tb hard to another PC to unlock drive but it's not accepting correct password and recovery key.
I made windows image before encryption. After restoring that 2nd and 4th drives are not accessible, 5th is formatted and 3rd drive data is intact with minor data loss.
I ran testdisk-7.0 and found no drive in the quick search. The log file is pasted below.
Fri Jul 1 23:56:11 2016
Command line: TestDisk TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <[email protected]> CGSecurity - Data recovery: TestDisk & PhotoRec
OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=801567145984
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=801567145984
disk_g... Read more

Answer:Windows 10 bitlocker protected drive is not working.

This is tricky to advise on. I am assuming that you successfully enabled hardware encryption on the Seagate drive (when you encrypted it, it would not have taken any time to achieve as opposed to hardware encryption) which means if this is the boot drive (another assumption, looks like you're talking about it like it is the boot drive?) you originally installed Windows to it whilst uninitialized (or you did a Diskpart Clean on it before installing) otherwise it would not be hardware encrypted.
I am also assuming you have a TPM installed, since you give few details.
The TPM means you CANNOT transfer this drive into another PC and unlock it. That's the point of a TPM.
It is not clear whether you are trying to recover the data on the drive, or just to wipe it and do a clean install. If you are trying to wipe it, bring up the command line (via the USB boot stick, it is an option in there somewhere) and run Diskpart Clean on the drive concerned (make sure to select the right drive). If this will not work, use the Seagate utility (can be made as a bootable USB stick too) to do a secure erase. Then it should work.
If it is hardware encrypted, the USB boot stick should ask you to enter the Bitlocker Key before unlocking. I'm not sure why it is not doing so. This really ought to happen with software Bitlocker too, but I don't use that for boot drives so I can't speak from experience. Hard to work out without getting my hands on it. You may find it easier to wipe the drive and reac... Read more

3 more replies
Relevance 97.99%

i brought a new laptop few days ago from hp world with windows 10 but in this windows there is no option found for "BitLocker is a full disk encryption" in control panel and not even when i am trying click on any drive , give some response of it what i do

More replies
Relevance 96.76%

Whilst Windows Professional does not support encrypting using bitlocker, any version of Windows 7 can unlock pre-existing removable drives going by the following technet article:
https://technet.microsoft.com/en-us/library/ee449438(v=ws.10).aspx#BKMK_Vista
My observation generally correlates with the above. In fact saying Win Pro does not support bitlocker encryption is not correct. I commenced bitlocker encryption on an external removable drive on a Windows Ultimate machine, paused it part way through and
connected into my Windows Professional machine and it continued encrypting the device from where it left off! It also appears you can write to bitlocker encrypted removable drives from Win Pro also.

Question: upon unlocking a bitlocker encrypted removable drive on a Windows Professional machine, will files I write to it be correctly encrypted as if the same files were being written from a Windows Ultimate machine?

I would seem so.

More replies
Relevance 96.76%

Hello all! Quick question.

Can you use a Bitlocker'd jump drive as a Windows Install Media?

Thanks!

More replies
Relevance 96.76%

I use my USB flash drive at work all the time so I know it works fine. Windows 10 used to read it fine, but stopped about a week or so ago. Now when I select it from the file explorer it either says it is not accessible, access denied, or tries to open Ad-Adware. I can reach the non-protected portion sometimes, but it never prompts me for the password to open the files I need. Any thoughts? Thanks.

Note - I've tried changing the drive letter, but that didn't help. Same things occur. Basically, the unlock message never appears. I also tried it in different USB ports.

More replies
Relevance 96.76%

I have a problem that when I encryption my PC using bitLocker encryption drive it was working fine
and i decryption
so, when I wanna encryption it again I got this message

"The Group Policy settings for BitLocker startup options are in conflict and cannot be applied. Contact your system administrator for more information."

So anyone can help me to solve this problem
I have windows7 (64bit) enterprise

thanks

Answer:problem using Bitlocker encription drive (build in windows)

Hi,

Since its an Enterprise system, and you are getting messages to contact your system administrator, this suggests its a work PC. I would recommend contacting your system administrator for help.

Regards,
Golden

3 more replies
Relevance 96.76%

I was having windows 7 ultimate 32 bit "activated" on my pc. I encrypted my drive D with
bitlocker , one day i was working on my pc suddenly a power failure occurred and after this when i reboot my pc windows 7 cannot start so i decided to reinstall windows 7 but the setup is showing "Windows could not retrieve information about the disk
on this computer" so i installed Windows XP it installed successfully but i was unable to access my local drive D so
i try to install windows 7 but it again shows the error message "Windows could not retrieve information about the disk on this computer" i remembered my bitlocker password and the i am having important data on drive D so guys please suggest me how
can i install windows 7 on my pc so i can decrypt drive D.

More replies
Relevance 96.76%

Windows wants me to unlock my drive with a recovery key even though I know my password. I have tried multiple computers and laptops but they all have the same problem. PLZ HELP!!!

P.S: I don't know my recovery key and I don't know where it is :(

More replies
Relevance 96.76%

My laptop has two SSD drives that run in RAID 0 configuration (so it's hardware RAID, not software RAID, but specifically RAID 0, where data are stored across two drives, not mirrored).

I am currently running Windows 8.1 Pro 64-bit and ran into some difficulties when I turned on Bitlocker. I was able to get my computer back to functioning, and Bitlocker says that my drive is now fully encrypted, but I have an error message from
Intel, which is how we discovered that my drive is really two drives with RAID 0. I'm wondering if anyone knows much about this. Specifically:

Does Bitlocker in Windows 8.1 Pro support RAID 0 -- should I trust that it's actually fully encrypting my data and won't cause problems going forward, e.g., if I de-encrypt and re-encrypt to change the Bitlocker settings or upgrade my OS?

and

Would upgrading to Windows 10 Pro, which I haven't done yet but plan to do eventually, result in Bitlocker working better with my RAID 0 configuration (e.g., is RAID 0 newly supported in Windows 10 Pro?)?

I haven't been able to find information about Bitlocker and RAID 0 that is current enough to answer my questions.

Thanks,
Sarah

More replies
Relevance 96.35%

Hi Everyone,

I am trying to set up Bitlocker on a work FlashDrive (Toshiba 64GB) this will be holding install files for our software so cannot be accessed if lost,

when trying to turn BitLocker To Go on this is what I get



Can anyone help me with this?

Thanks Guys,
Gavin

More replies
Relevance 95.94%

I am trying to encrypt my drive using BitLocker. I am saving the key to a USB drive, only encrypting used data, and using new encryption mode. I then run system check before encrypting the drive, and when I restart my computer, I get the following message: "BitLocker could not be enabled. The BitLocker encryption key cannot be obtained from the Trusted Platform Module (TPM). C: was not encrypted."I've done some troubleshooting elsewhere, but can't find any info to help me. I'm running Windows 10 Pro on a Lenovo T440s machine. My TPM is initialized, owned and running, so I'm not sure what to do there. Here are images of my TPM from Device Manager.I'm at a loss, and I definitely need to be able to encrypt my drive. Does anyone have any information? If you need more information about my system, BIOS, etc., I'll be happy to oblige. Thank you.  

Answer:Unable to encrypt drive using BitLocker on T440s running Windows 10

My guess is that you deployed Win10 in legacy mode, instead of UEFI mode.  You can confirm this in msinfo32.exe, look for "BIOS Mode" in the right-hand panel.  It needs to be "UEFI" if you want to use TPM 2.0.  

2 more replies
Relevance 95.12%

Dear All,
I want to ask if any Microsoft forum or technet mentioned that
Step 1: reinstall the OS drive without formatting the D data drive which is bitlocker encrypted.

Step 2: After encypted OS drive again, the D data drive can be automatically unlocked by reset the password.
Thanks.

More replies
Relevance 94.71%

Hi folks, Need some help here.  I reformatted (complete reformat with no personal preferences saved) of Windows 10 because of several glitches that were annoying.  I was smart to backup all my documents to an external hard drive that was encrypted with BitLocker.  But once the reformat was complete, the drive is no longer detected.  I can see the drive in Disk Management but it won't pop up in explorer and BitLocker does not prompt me when I plug in.  Help!  My two drives have all my backups and backups of backups!!! I've tried to update all the software/firmware/drivers but to no avail. I'm still under warranty but this is a software issue only I'm certain of it.   Help!

More replies
Relevance 94.71%

Hi folks,
Just came across a scenario for one of our customer. 

Trying to recover data off a drive that is bitlocker encrypted. No recovery key available to get pass bitlocker and access the drive.
Please advise if I reinstall OS preserving the old data in windows.old folder; will I be able to get the access the windows.old folder afterwards to get the data off it.

Thanks in Advance

More replies
Relevance 94.71%

Is it possible to bitlocker-encypt a UEFI/GPT drive from which I boot with Windows 7 64-bit ultimate (TPM-motherboard)?

Answer:Is it possible to bitlocker-encypt a UEFI/GPT drive from which I boot with Windows 7 64-bit ultimate (TPM-motherboard)?

Sure. BL does support GPT.

2 more replies
Relevance 93.89%

Hi 
I am trying to turn on the bitlocker using manage bde by command prompt but it is showing an error 0x80070057 so how can i proceed or fix this problem?

More replies
Relevance 93.89%

How do I encrypt my Extrenal HDD with BitLocker as I don't get any direct options for encrypting the drive?
Also, is there any option to encrypt the drive without formatting because I don't want to lose my data

More replies
Relevance 93.89%

Dear Sirs! I have encryptrd system windows disc with Bitlocker., The access method is flash drive. .The encryption works normally. But I eject the flash drive and reboot the comp, the only  empty blue screen appears. and the comp  reboots
in 2-3 minutes.  This means I can not to restore access from the bitlocker key, if the flash? for example, will be broken.. Please write me how to solve it.

More replies
Relevance 93.07%

I am having a hard time trying to figure out what encryption method and cypher strength is used on my Bitlocker to go encrypted portable hard drive.

I understand the settings for Bitlocker are configured in the Group Policy Editor but besides that is there any way to see what level of encryption your portable drive has.

When I encrypted this drive, I left the Group Policy settings default when encrpyting the drive which means the drive was supposedly encrypted using 128-bit with diffuser.

This would come in handy when trying to prove to someone that the device is infact encrypted with either 128-bit or 256-bit.

Answer:Bitlocker To Go Encryption Level

Hello Doc, and welcome to Seven Forums.

If the computer does not have Group Policy included to look at, then you can edit (right click on REG file and click on Edit) the REG file downloads in OPTION TWO of the tutorial below, then check the registry and compare it to the REG file downloads to see how it set. By default, it is set to 128-bit with diffuser in Windows 7.

BitLocker Drive Encryption - Change Encryption Method and Cipher Strength

Hope this helps,
Shawn

5 more replies
Relevance 93.07%

Hi, I have a problem on my laptop. My office laptop is encrypted using Bitlocker as part of our firm's security over our machines and data stored therein. 
One Saturday, I opened my laptop when it got hibernated last friday night after work. At startup, it ask for my password, I entered it but it showed: "Too many PIN attempts". 
I dont know why and how it happened as I did not change my laptops for the last 3 months since it was issued to me. Since its a weekend, I asked some of our IT personnel having their rest days on how to resolve this, they taught to search for the recovery key
in their database using the identifier provided by bitlocker. I found the files recovery keys but no one matched the identifier showed on my laptop's screen (that cant be accessed).
My question is, what if the recovery keys of my laptop cannot be located anymore, are there ways possible where I can still log-in again losing my files? thanks.

More replies
Relevance 93.07%

Hello

Thought I'd ask before I do something stupid
I'd like to encrypt my fileservers with Bitlocker but I wonder how fast it is these days? The servers run Windows 8.1 and when trying on another system I get about 100MB reads and writes during encryption - is this somewhere in the ballpark for performance? Oh and the cpu supports hardware encryption as well

Thanks in advance
Edit:

Just finished encrypting a Raid6 array with 8x2TB drives. Time approximately 24 hours and an average speed of about 125-130MB/sec. Cpu is an AMD A4 5300 dual core cpu. Not so bad imho.
 

More replies
Relevance 93.07%

I have Windows 7 installed and i use a 4GB memory card for private files. The problem is i used Bitlocker encryption, which was working fine until i installed windows updates. Now this mrning i cannot access the memory card at all. It just says drive not accessible although it does recognise that the drive is there. I have tried system restore which also at the moment will not restore to any point. Can anyone help me with this problem please.

Answer:Bitlocker encryption problem

cant think of anything off hand to help with your immediate problem but for future have you tried the yo-safe feature in win locker in win 7 it gives u drive you can hide so no one even knows its there and even someone who knows abt yo-safe cant get into it as when you open the yo-safe it asks for your password you can make your password the same as your master password when windows starts or you can give it a different password.

1 more replies
Relevance 93.07%

Novice Question, folks...
 
If I have already encrypted my data with BitLocker or some other encryption software, will that render ransomware ineffective?  Or, does it mean my already-encrypted data just gets another layer of encryption (i.e., double-encrypted)?  

Answer:Ransomware vs BitLocker (or any other encryption s/w)

Hi there,If your data is already encrypted then a crypto ransomware would just add its own encryption over the data, making it double encrypted as you said.

6 more replies
Relevance 93.07%

i use encryption.

what's the diff between Bitlocker and the encryption in windows XP?

xp encryption seems to work fine for me.

Answer:what's the diff between Bitlocker and the encryption

Win7 has disk imaging software and file backup software in most of the versions, both able to be scheduled. Additionally, there is also an included utility to create a restore CD.

Yes, yes, all of these can be had by excellent third party apps but it is enlightening to see MS finally come around and include more required OS-type utilities with the OS itself.

edit: Woah, my response here was to a completely different post, one questioning the need to upgrade from XP to Win7. Either the mods or the OP significantly changed the original post. Normally I am not that obtuse when replying.

7 more replies
Relevance 93.07%

Hey there. I'm having trouble unlocking my external flash drive which was encrypted by me a few months back. It was encrypted using my desktop PC which is not working anymore. I'm trying to unlock it using my laptop.
The problem is, I am entering the correct password but it's marking it as incorrect. I am sure about the password because I had stored it in my phone.

I have a .pfx certificate as well but I really don't know how will it be helpful in unlocking the device. I had saved this .pfx file because while the process of encryption, windows had advised me to save it. Any help will be appreciated. I really need to unlock
this device as the data it contains is irreplaceable.

Regards,
Hannan.

More replies
Relevance 93.07%

I m having problems with bitlocker .... my hard drives are not showing in control panel-->system&security-->Bitlocker Encryption drive .... any help related to this please ?????????????????????????????????????????????????????????

Answer:Bitlocker Encryption drives

Make sure you have ALL of the requirements
Hardware requirements for BitLocker Drive Encryption

7 more replies
Relevance 93.07%

Hi all

bare with me on this, it may sound stupid and have a very simple answer.

I've got a laptop which I currently have Symantec Desktop Encryption installed with C:/ encrypted.
Personally not quite sure if the files it self on C:/ are encrypted or not (I'm able to access my laptop which has the drive encrypted, over the network from my desktop without any issues/error messages to say its encrypted etc)

This is where the possible stupidity comes in. Symantec current has the drive encrypted (Enter password before booting to Windows), but I was wondering if the data it self is encrypted and if not, would it be possible to do this within Symantec (Cant seem to find a way) if not, would Bitlocker be a solution to encrypting the data or will this cause confliction?

On the side as well, I know that Windows has an option to show folders/directories in a different color if they are encrypted, this option is enabled, but none of the directories are coloured, any idea how to get this to work?
Thanks in advance
Josh

Answer:Using Bitlocker and Symantec Encryption

If it said encrypted, it really is. For example, someone detached the hard drive from your system and then inserted that to another computer to read the contents. Symantec will notify a password entry and if there's no recovery key, you won't be able to access it. It works like BitLocker To Go. BitLocker Drive Encryption doesn't need a password prompt if the drive is connected to the original motherboard and there's no changes to BIOS settings or updates AFAIK.

3 more replies
Relevance 92.25%

My laptop has two SSD drives that run in RAID 0 configuration (so it's hardware RAID, not software RAID, but specifically RAID 0, where data are stored across two drives, not mirrored).

I am currently running Windows 8.1 Pro 64-bit and ran into some difficulties when I turned on Bitlocker. I was able to get my computer back to functioning, and Bitlocker says that my drive is now fully encrypted, but I have an error message from
Intel, which is how we discovered that my drive is really two drives with RAID 0. I'm wondering if anyone knows much about this. Specifically:

Does Bitlocker in Windows 8.1 Pro support RAID 0 -- should I trust that it's actually fully encrypting my data and won't cause problems going forward, e.g., if I de-encrypt and re-encrypt to change the Bitlocker settings or upgrade my OS?

and

Would upgrading to Windows 10 Pro, which I haven't done yet but plan to do eventually, result in Bitlocker working better with my RAID 0 configuration (e.g., is RAID 0 newly supported in Windows 10 Pro?)?

I haven't been able to find information about Bitlocker and RAID 0 that is current enough to answer my questions.

Thanks,
Sarah

More replies
Relevance 91.84%

I was trying to encrypt my USB external hard drive (1 TB, mounted to E using BitLocker, and after the encryption got 10.1% finished, I accidentally shut down the computer. After restarting, I tried to resume the encryption, but it gives me an error: "Encryption could not be resumed. The device is not ready." I've tried using >manage-bde -resume E: but it returns the same error with code 0x80070015. I also get the same error if I try to go to the Control Panel and Turn off BitLocker.
Running >chkdsk E: shows several corrupt attribute records, but I haven't tried running that with /F since I'm worried that might make it difficult to properly decrypt BitLocker.
Are there any recommendations on how to either resume the encryption or decrypt the 10.1% it's already done? I've heard there's a BitLocker repair tool, but I don't have an empty 1 TB drive to use for that.

More replies
Relevance 91.84%

Question: Is it possible to use the command "manage-bde -pause D:" to pause BitLocker encrypting the HDD, which would then allow me to shut down the computer, transport it to my new house, and then turn the computer on and resume the encryption process, without any loss of data or corruption?

I have an internal hard disk drive currently being encrypted (~47%) using BitLocker. In 8 hours time I need to transport the whole PC to a new house where I'll be living permanently, meaning it will need to be turned off and disconnected from the power. Considering the time it has already run I don't think it will complete in time I have available.

If it is not possible to do that I can leave the computer at its original location to complete encryption, the only problem is that there is a large travel distance and the inconvenience of not being able to use my primary computer.

Edit: Forgot to mention that this is an internal HDD used to store downloads, documents, photos, music, and videos. My operating system is stored on an SSD that has already been encrypted.

Thanks in advance!

More replies
Relevance 91.84%

Hi,
I have encrypted a win 8 desktop pc, c: encrypted succesfully but when encrypting the d: it doesn't look like it has encrypted properly. The drive is showing as locked as the encryption status as 'unknown'. I am unable to unencrypt the drive as just the identifier was generated without a recovery key.
From event log:
A BitLocker key protector was created.
Protector GUID: {e0c8456c-37cf-42d0-b9b5-041c9539b385}
Identification GUID: {3d839f56-ad70-4449-ae7e-bfc91867aada}
The identification field was changed.
Identification GUID: {3d839f56-ad70-4449-ae7e-bfc91867aada}
BitLocker encryption was started for volume D:.
That's the last event for the D:/
Is there a way of unlocking the drive from the protector id?
Many thanks!

More replies
Relevance 91.84%

I have the 1TB NVMe SSD (Samsung PM951) and can't get hardware Bitlocker encryption working. Can someone confirm whether the PM951 supports eDrive/TCG Opal? If not, will a firmware update enable support in the future?
I have the TPM and UEFI enabled, but when I try to set up Bitlocker, I do not get the hardware encryption option. Seems like the PM951 should support this like Samsung's retail drives. I can't even use the Samsung disk utilities to investigate because those are only for retail drives.

Answer:XPS 15 9550 SSD Hardware Encryption / Bitlocker

I'm also interested in this issue for my XPS twin Precision 5510. Please let me know if you find something out!

3 more replies
Relevance 91.84%

I tried several times to encrypt the entire disk after reinstalling Windows 10 but it always took for ever (usually 10 hours) to fully encrypt my internal 320GB drive. I managed to run bitlocker successfully by encrypting only used space. My question is should I run cipher.exe /w to wipe all unused space as this is an old laptop?

I have found manage-bde -w c: to wipe free disk and this is now working ok.

How does Bitlocker work when only encrypting used space - i.e. if I write a file to the disk I assume it automatically encrypts it, but if I then delete that file is the space no longer encrypted and therefore open to hackers?
Look forward to your comments.
Thanks!

Answer:BitLocker - Used Space Encryption on used Laptop?

win10freak said:

How does Bitlocker work when only encrypting used space - i.e. if I write a file to the disk I assume it automatically encrypts it, but if I then delete that file is the space no longer encrypted and therefore open to hackers?



If you take a disk and set bitlocker to encrypt only used space it will encrypt the blocks used by the filesystem. If there was some old deleted stuff on the disk when you started that could in theory be recovered. After turning on bitlocker all new files are encrypted. They are not decrypted when you delete them and these deleted files can't be retrieved.







win10freak said:

I tried several times to encrypt the entire disk after reinstalling Windows 10 but it always took for ever (usually 10 hours) to fully encrypt my internal 320GB drive.



If you have ever encrypted the whole disk you only need to encrypt used space if re-installing. It will not be possible to retrieve anything from the remaining space on the disk as it was previously encrypted.

0 more replies
Relevance 91.84%

I have installed and set up BitLocker on a Sony VAIO with a TPM 1.2 chip. The drive has been fully encrypted. With BitLocker on, everytime the system boots I get the following message:

Windows BitLocker Drive Encryption Information
The system boot information has changed since BitLocker was enabled.
You must supply a BitLocker recovery password to start this system.
Confirm that the boot changes to this system are authorized.
If the changes to the boot system are trusted, then disable and re-enable BitLocker. This will reset BitLocker to use the new boot information.
Otherwise, restore the system boot information.
ENTER=Continue 
I have tried disabling and re-enabling Bitlocker (disable; reboot; enable; reboot) and get the same message. I have even tried disabling to the point of decrypting and then re-encrypting the whole drive. Neither apporach has worked. According to the BitLocker FAQ, one of the following should trigger the message I'm getting:

Unauthorized changing of the BIOS, master boot record (MBR), boot sector, boot manager, or other early boot components would cause a failure in the integrity checks and keep the TPM-protected key from being released. This is by design because unauthorized modification of any of those components could and should be perceived as an attack. Of course, the BitLocker feature provides methods for authenticated system administrators to update these components if required.
None of that has happened. Any suggestions?
Tha... Read more

Answer:BitLocker requests encryption key at every boot

When I tested it the setting didn't take effect unless I turned off bitlocker and decrypted the drive then turned it back on with the new setting applied.
I forgot to mention in the last post too, open an administrative commmand prompt. (right click on CMD and click Run As Administrator) and type "gpupdate /force" this reloads the GPO. (it usually take a little while for them to refresh by default.)
An earlier post in this thread states that you just need to apply the new PCR settings and reboot, but from my own testing you really do need to disable, decrypt, enable and encrypt with a new key. The only way I found to speed things up without having to wait for the drive to fully encrypt each time was to skip the test, and right away click on the pause encryption option in the ecryption dialog box. I would then perform my reboot test. I have to do it all again though. A reboot test and a hibernate test. It seems hibernating the workstaion also changes startup information on the computer that bitlocker doesn't like.

44 more replies
Relevance 91.84%

Hi All,
After encrypt USB and save recovery file I noticed that bitlocker recovery key identification changes
I mean it's not the same on Recovery File.

Any Ideas?
Regards
JO

More replies
Relevance 91.84%

Hi Everyone!
I have intresting situation that started quite some time ago but now it´s time to fix it :) We are using MBAM in our environment and SCCM to publish windows 10 to computers. So far everything is working. I have not found correct or good solution to deploy
BitLocker in TaskSequence. All manuals are a bit different. So what I did is: I have GPO managing BitLocker requirement. I will just install MBAM client (2.5 SP1) to computers and when user will get computer then after couple of hours MBAM client will require
to insert PIN and it will start to encrypt the drive. So everything works as I want! I like that users can insert their own PIN and it´s not preinserted by administrator. 
Problem is now when computer finish the encryption process and you restart computer. After that computer is asking PIN code (which is correct) and after that it starts Windows Repairing. And it´s not possible to use any repair method (Reset, Restore, Startup
repair etc) - so only option is to format computer. I have noticed that if you encrypt drive before Windows patches then it will survive restart (if it´s working then it´s working!) but if computer will get patches and then you will restart the computer, then
no use - format. 
What can cause the issue and how to fix it? Or maybe there is a good manual how to use MBAM/BL in SCCM TS correctly (if I´m doing it wrong!)... 
Br,

More replies
Relevance 91.84%

Has anyone tried to enable hardware based encryption on the P50s with Bitlocker and the SSD? If so, how did it go? I know that on some systems you need just the right combination of BIOS settings and drivers, so I wanted to check and see if anyone had done it and tips you had.

More replies
Relevance 91.84%

I am using a Lenovo Yoga 260 with Windows 8.1. Every time I reboot the Yoga it requires me to enter the bitlocker recovery key. The PC thinks a configuration change was made to the PC. However no changes were made. I have reimaged the PC and I am still
have experiencing the same issue. I have updated the BIOS and all the PC drivers but still no change. I have reset the TMP chip and decrypted the drive. Still the same results. Any ideas what might be causing this issue?

More replies
Relevance 91.84%

Hi,

New drive 1gb external, running bitlocker for the first time. Left it overnight cos it was taking forever, (which is the norm)

Woke up this morning and it was stuck on something like 47.1% requesting the bitlocker password, put that in and it starts encrypting again.... But every few random mins it falls over with an error message:

An Error Occurred The System cannot find the file specified.

And prompts me to put my bitlocker password back in, for which I do, and the encrpytion starts again.

Its like at 50% now, after it falling over 3 times in the last 30mins....

I'm not exactly what to do.. I cant sit here for the next 10hrs waiting for it to fall over every few mins asking for the password.

I'd be up for scrapping the whole encrpytion and starting all over again.. But not exactly sure on how to permantely un-crypt the drive and reformat it ? Perhaps running a scandisk before doing so... It was a brand new drive.

I can actually still access the data, because autoplay opens after every error allowing me to see and open the files.

Any suggestions ?

Answer:Bitlocker crashing during initial encryption

TheDoc46, my recommendation is a complete format of the drive. Remove the partitions and then re-create them and then format completely.

Best not to use Bitlocker on an external drive as it is worthless to any other computer due to the encryption technique. Also there are private encryption programs that are just as good like Free Encryption Software - Password Protect Files and Lock Folders


I bought their pro version which I really like, no financial connection, just a satisfied user.

Rich

5 more replies
Relevance 91.84%

Since I have encrypted my computer (2HDDs) with bitlocker I cannot perform a total shutdown including the pysical break from power. After a few seconds I get a black screen and the shutdown process stops. To end the session I must push the button of my laptop for a few seconds. Is there a way around to shutdown the computer without using the hardware?

My system: CPU 3,02GByte
2 HDDs encrypted with bitlocker
Windows7-ultimate-

Answer:No phsically shutdown since bitlocker encryption?

  
Quote: Originally Posted by albert1234


Since I have encrypted my computer (2HDDs) with bitlocker I cannot perform a total shutdown including the pysical break from power. After a few seconds I get a black screen and the shutdown process stops. To end the session I must push the button of my laptop for a few seconds. Is there a way around to shutdown the computer without using the hardware?

My system: CPU 3,02GByte
2 HDDs encrypted with bitlocker
Windows7-ultimate-


I don't now will this help you, but you can try it
BitLocker Drive Encryption Step-by-Step Guide

Limit Windows shutdown options
...This behavior can be controlled in Windows Group Policy. See the ?Shutdown: Allow system to be shut down without have to log on? setting in Windows security policy...
System Integrity Team Blog
cheers

4 more replies
Relevance 91.84%

I was trying to encrypt my USB external hard drive (1 TB, mounted to E using BitLocker, and after the encryption got 10.1% finished, I accidentally shut down the computer. After restarting, I tried to resume the encryption, but it gives me an error: "Encryption could not be resumed. The device is not ready." I've tried using >manage-bde -resume E: but it returns the same error with code 0x80070015. I also get the same error if I try to go to the Control Panel and Turn off BitLocker.
Running >chkdsk E: shows several corrupt attribute records, but I haven't tried running that with /F since I'm worried that might make it difficult to properly decrypt BitLocker.
Are there any recommendations on how to either resume the encryption or decrypt the 10.1% it's already done? I've heard there's a BitLocker repair tool, but I don't have an empty 1 TB drive to use for that.

More replies
Relevance 91.84%

hi ,
sorry for my english . I have questation . If I encrypt with bitlocker USB drive , where is stored encrypt keys ? Is stored in system information in the USB drive ?


Falcon

More replies