Computer Support Forum

When viewing System Event Log evtx file many events show "unable to retrieve the event description"

Question: When viewing System Event Log evtx file many events show "unable to retrieve the event description"

Hello
I am new to Microsoft Message Analyzer and just downloaded version 1.4 and installed on my Windows 10 laptop
I saved my Windows System Event log as an .evtx file to have some data to start looking at. I note the column entitled 'summary' appears to show the body of the event message. However I see many rows which state "unable to retrieve the event description"
in this column, what do I need to do to fix this issues please? could it of been the way that I saved the .evtx file in the first instance (I accepted the defaults) or do I need to install some additional files/components so the messages are displayed
correctly?

Thanks all
Ernest

More replies
Relevance 100%
Preferred Solution: When viewing System Event Log evtx file many events show "unable to retrieve the event description"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 93.09%

Hi, I recently made some upgrades to a (previously fine) PC - they were

- Installing 4GB extra RAM, of the same variety
- Reinstalling windows on a new SSD (a Samsung SSD 850 EVO 500GB)

I previously also upgraded to Windows 10, but a bunch of blue screens and other issues later I reinstalled 7. I'm still having problems though - the current symptoms are that every so often (1-3 times a day) the computer will hang for ~1-2 minutes on the 'starting windows' screen. When it finally loads, it will often hang for further extended periods before settling down. I checked in these event log and during these periods there will be many 'atapi' errors, with Event ID 11 "The driver detected a controller error on \Device\Ide\IdePort0." (I have attached a screenshot).

There will sometimes be other errors, usually relating to the timeout of certain things, but the previously mentioned error is by far the most prolific. On rare occasions there have been more serious errors - never blue screens since going back to windows 7, but once I booted to a black screen with just a mouse (was able to shut down via task manager then following a restart seemed ok).

Through some investigation, it does seem to be that the root cause of the problem is the SSD; I identified this a while ago and have tried various fixes, including:

Ensuring my Motherboard (a M4A78LT-M) SATA ports are configured in AHCI mode (they were previously IDE). This also led me to completely re-installing windows in an e... Read more

More replies
Relevance 90.48%

Assume I exported the current events into an external *.evtx log file.
Afterwards I cleaned all active event log entries.

However it could be that I want to re-check some particular events from the past (=from the exported event logfile). For?better view I would like to import them again into the official active event logs.

Is this possible?

How exactly? I found no "import" menu.

Another related question:

Assume I exported a series of *.evtx log files (e.g. every month).

Can I join/merge them together into ONE big *.evtx file?

How can I achieve this?

Peter

More replies
Relevance 88.74%

Hi

After i have removed some spyware/trojans I starting getting this error message when I try to access the eventlog:

event log "unable to complete the operation on" eg. system "the interface is unknown" windows xp.

Also I can add programs to Symantec internet security 2005 firewall, reinstalling don't fix it. Some programs also start to fail, "bad image" or you don't have admin premissions.

Reinstalling SP2 or using system restore for XP don't fix any thing.

I have scanned my computer with 4 antispyware programs, and 4 antivirus programs and check it with hijackthis so my machine should be clean.

Does any one have any Idears?

Answer:event log "unable to complete the operation on" "the interface is unknown" windo

maybe you removes something with hijackthis which your system needs

go to start, run and type "sfc /scannow"
then it will rpompt you for the XP CD, put it in and let it scan your computer for corrupted or missing files

6 more replies
Relevance 85.55%

Event Log Explorer
A tool to help Manage, Analyze and Report Windows Event Logs
For Windows NT/2000/XP/2003 operating systems​
This is a simple, "starter" guide to help use this tool. (Note this tool will only work on Windows NT/2000/XP/2003. It will not work with Windows Vista.) Download and run Event Log Explorer.

One time initialization

Click Tree->Show Tree
Click File->New Workspace
Click File->Save Workspace As (and save your workspace file anywhere you choose)
Example: To Filter / View / Export Recent Error and Warning Log Events

Open an Event Log
>> (e.g Typically, you only need look at the System Log (for System event records) and the Application Log (for Application related events)
Filter the events you want to see (for this example we filter to only see Non-Information events that occured in the last 7 days)
>> Click View->Filter.
>> Uncheck Information. Towards the bottom of the filter window, look for ?Display event for the last? enter 7 days. Click OK
Click File->Export Log to save a copy of the events for later viewing or sending to others
>> Check: Text file, All events, Event Description
>> Uncheck Export Event Data
>> Check Close dialog when done
Click Export and save as a txt file on your Desktop
Help Troubleshooting an Event

Double click an event to see the "Event Description" (which provides more detail about the event)
Click Event ID Database button for an web page a... Read more

Answer:"Event Log Explorer" tool helps manage/analyze/report on your Windows Event Logs

I use the subscription to EventID.net. It has been greatly helpful. I don't have this analyser but am a big believer in using the Event Viewer. I'll add a description I have written up which will help in determining the Events: This may be useful in addition to the Event Analyzer.

One thing I have not been able to do is keep the filters set with the software in the OS.

Find the Error(s)in the Event Viewer that correspond to the crash/freeze/error message/blue screen, etc.:

Description of the Event Viewer:




Unfortunately, many Windows XP users aren't aware of the Event Viewer, what it is, where it is, how it can help with a problem:
The Event Viewer has logs for everything that happens on the computer. There are three sets of logs: System, Applications and Security. By opening the first two to display the Events, you can look for Errors that correspond to the time of the problem- in your case, the crash.

There are three types of Events in the System and Apps logs:
1. Information (white circle w/blue i): this is just basic documentation of the normal working of the System or Apps.
2. Warnings (yellow triangle w/black exclamation mark) noting some problem at that moment. Warnings usually resolve on their own. If they do not, they become>>>
3. Errors (red circle w/white X- they document something that didn't work or isn't happening as it should. Each Errors has three parts: an ID#, a Source and a Description. By doing a right clic... Read more

1 more replies
Relevance 82.65%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 82.07%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 78.59%

My computer recently started having issues........ here is what is going on:
* boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute
> sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* The audio service does not work as well...
from when I press the power button to when I can actually use my computer takes 10 - 15 minutes.

Here is what I have tried so far
*Turning off all start up programs / services
*Tested Memory - passed
*Hard Drive Self Test ---- # 1 - 7 fail / I am guessing that this is the source of the problem, however my computer does still work once everything is finally booted. So I don't know what to do with that information or if that test even matters.
* I have tried looking at the event viewer but every time it says that the event log service is unavailable.
> I try turning on Windows Event Log but that does not change anything
* tried "netsh winsock reset" in command prompt, based on a different thread that I found - it didn't work


64bit Windows 7 untimate, clean install from usb iso (post resolution to bootsect.exe issue), running on dell poweredge sc430,
&... Read more

Answer:Windows failed to conect to " system event notification service"

This seems to be a common problem, I am now also experiencing the same.
I have Win 7 Home Premium 64. Did chkdsk /r, defragged, tried sfc/scannow scanned for viruses and even tried reseting winsock.
My aero themes are greyed out, when trying to fix it with MS fixit it errors out.
It takes a long time to boot and then says "failed to connect to System event notification service"

One search on google will show this is a major problem, so why does MS not come out with a fix.
This seems to be the biggest frustration with Win 7 compared to XP, lack of support from MS.

2 more replies
Relevance 78.59%

Every time I log onto my computer, I enter my password and it looks like its loading to the desktop. Then it prompts me to type it in again for some reason - and the second time it actually does load the desktop.

This just started happening today.

I looked in the event viewer, and I get the same error for every time I turn on my PC or restart...
"The COM+ Event System detected an inconsistency in its internal state. The assertion "GetLastError() == 122L" failed at line 201 of d:\qxp_slp\com\com1x\src\events\shared\sectools.cpp. Please contact Microsoft Product Support Services to report this error.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."

The link for microsoft help is useless.

The last things I did were...
-set a BIOS supervisor and user password (so you must enter a password to boot the machine and also to enter BIOS setup to make changes)
- Made several changes to "local security policy" (under control panel, administrative tools, local security policy)

I don't see why changing security policy would affect anything. Basically the changes I made were just to make the computer a bit more secure.

I changed the LAN Manager Authentication level to 'send LTNMv2 response only/refuse LM'

I changed "Do not store LAN Manager hash value on next password change" to 'enabled' (default was disabled)
And under 'User Rights assignment' I simply ch... Read more

Answer:errror "The COM+ Event System detected an inconsistency in its internal state."

solved my own problem-

simply creating a new user and restarting the computer fixed the problem.

I have a feeling it had something to do with the LAN Manager hash value setting" I changed.
 

1 more replies
Relevance 78.59%

For the past few weeks I've been having this strange issue with my computer. I would be doing something like browsing the internet or playing a game. Then I would go to access some media files such as music or video's on my media drive and my computer would start acting up. The symptoms I would get is the sound would buzz and scratch, the screen would freeze and stutter, and repeat this every few seconds until my hard drive fails and loses connection all-together.

Then I would have to restart my computer to get my drive back and POST displays that BOOTMGR is missing. I would have to go into BIOS to reset the Boot Order to get my system to boot up and I would get my media drive back.



At first I thought my hard drive was dying, so I took it out and plugged it into another computer to troubleshoot it. Everything seemed to work fine. I even went to the lengths of purchasing a new hard drive, but have yet to install it. I then realized that my video drivers started to act up and crash so I updated those. I believed I had a beta driver and once I got a WHQL driver the problem went away. At least until now...

A week later I was on facebook listening to some music and I went to browse my media drive and to my surprise it instantly started stuttering and freezing again. I'm at the point where I don't know what else to do except replace the drive which I'll probably end up doing this weekend.

I've attached several Event Viewer logs. I could also try capturing... Read more

Answer:System freezes, HDD fails, Event 51 "error during paring operation"

First, change the title of your post. That should be PAGING, not PARING. A lot of people will skip the post not knowing what that is.

All errors indicate a dying hard drive as you suspected. The fact that it works without error in another PC raises the possibility that you may have power supply problems (insufficient power to the drives will produce the same errors), bad cables, or a problem with the SATA controller on the motherboard.

How many physical hard drives do you have in this PC? (Not to be confused with partitions on the same hard drive). If more than one physical hard drive, which one is the problem drive?

9 more replies
Relevance 78.59%

Today I booted up my laptop to get this screen - my desktop without an aero theme and the error message on-screen.

Nothing unusual happened last time I used my PC. No installation or updates that I am aware of.

The computer cannot shut down properly now either, it just hangs after the desktop icons are gone. I am forced to hard shutdown.

http://i.imgur.com/S2N6EGp.jpg


Any ideas?


I doubt its malware but will run scans soon to double check.

Answer:"windows could not connect to the system event notification service"

The service has apparently started though:

http://i.imgur.com/LEuXUAC.png

4 more replies
Relevance 78.59%

I receive this error message in the Windows System log regularly. Device Manager does not show any malfunctioning devices.

Apparently csvol service is part of HFS+ for Windows. This is a program that allows reading of HFS+ file systems on Windows. I did install that.

And I believe these Event ID 7000 errors are related to a service failing to start. maxView Storage Manager Agent service will not start. It is set to 'automatic start' in the Services viewer app. However, I find that it is not started, and if I attempt to start it manually, I receive a message stating it started and then stopped, "Some services stop automatically if they are not in use by other services or programs." That should not be the case with this service.

I'd greatly appreciate any help with this!
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />

<EventID Qualifiers="49152">7000</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x8080000000000000</Keywords>

<TimeCreated SystemTime="2016-06-19T01:55:30.224060300Z" />

<EventRecordID>33731</EventRecordID&g... Read more

More replies
Relevance 78.59%

Please Help !

My HP running Vista Home Basic suddenly gave me the following error message on startup: "Failed to connect to a Windows service: Could not connect to System Event Notification Service".
Among other things, this prevents me from connecting to my internet network, so I can't get on-line.
Rebooting did not help.

Following the google search I used an elevated command prompt (click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator) and typing "NETSH WINSOCK RESET ", then press the Enter key, and then restart the computer.

I still cannot access my internet network, instead of not connection now I get the message "unidentified network" and I still cannot go online although there I have some Mbs

It sais (I do not understand this text )
"What netsh winsock reset command does are it resets Winsock Catalog to a clean state or default configuration. It removes all Winsock LSP (Layered Service Providers) previously installed, including the potential malfunctioned LSP that causes loss of network packets transmission failure. So all previously-installed LSPs must be reinstalled. This command does not affect Winsock Name Space Provider entries."

Please help me with the next step in order to be able to go online from my computer.
Thank you!

More replies
Relevance 78.59%

I receive this error message in the Windows System log regularly. Device Manager does not show any malfunctioning devices.

Apparently csvol service is part of HFS+ for Windows. This is a program that allows reading of HFS+ file systems on Windows. I did install that.

And I believe these Event ID 7000 errors are related to a service failing to start. maxView Storage Manager Agent service will not start. It is set to 'automatic start' in the Services viewer app. However, I find that it is not started, and if I attempt to start it manually, I receive a message stating it started and then stopped, "Some services stop automatically if they are not in use by other services or programs." That should not be the case with this service.

I'd greatly appreciate any help with this!
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />

<EventID Qualifiers="49152">7000</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x8080000000000000</Keywords>

<TimeCreated SystemTime="2016-06-19T01:55:30.224060300Z" />

<EventRecordID>33731</EventRecordID&g... Read more

More replies
Relevance 78.59%

WinXP Pro SP3 - the thread title sums it up, but I've attached some screen shots below to illustrate what I'm talking about. It is only the "System" log that appears to corrupt, and after a reboot, the little red "X" illustrated in the 2nd shot below is gone, but it comes back. I'd like to 'rebuild' the log if possible, but the research I've done tells me that it is more-or-less done for. I have some other issues on this laptop (like random powering off) and I'd like to check the "System" log to see if something there offers a clue. Any insight, advice, or suggestions will be appreciated. Thanks!
 

Answer:WinXP Pro - Error "The Event Log File Is Corrupt"

http://support.microsoft.com/kb/172156
imagine you have already taken this route, hasn't happened to me yet, but will now have an idea of where to start if it ever does...
 

3 more replies
Relevance 78.3%

My 6-week-old Dell running Vista Home Basic suddenly gives me the following error message on startup: "Failed to connect to a Windows service: Could not connect to System Event Notification Service." Among other things, this prevents me from connecting to my wireless network, so I can't get on-line. It also prevents several programs within Kaspersky Internet Security from starting. Rebooting doesn't help. And the problem occurs regardless of whether I sign on as administrator or as general user.

More: I can't access the Windows Help & Support pages. And I'm told to "see System Events log" for details, but when I try, it says "Event Log Service is unavailable." When I try System Restore, it says "back-up hasn't been set up." (Aren't restore points set automatically?)

Please help!
 

Answer:"System Event Notification Service" meltdown

14 more replies
Relevance 77.43%

Hello all,
First, is it just me or is the Dell website a little difficult to navigate and sort of annoying? Having said that, I'm not here to trash Dell. I have been, overall, very happy with my Inspiron 3650; however, I have been plagued with some chronic Event Viewer warnings and errors. (As a side note- if there is a particular "group" or "forum" or whatever that discusses Event Viewer messages I would be grateful for that link). While most errors are Windows related, I do get one error which occurs every other day, "Event 0, Dell System Detect"--"The character '/' cannot be included in a name". See below for details.  While it doesn't seem to be causing any immediate problems (other than annoying me), I am concerned that it is affecting my ability to receive updates from Dell. 
Any thoughts would be appreciated! If this is the wrong forum to post this, please advise as well.
Thanks, P.
(Computer name and IP have been redacted)
Log Name:      ApplicationSource:        Dell System DetectDate:          8/13/2017 5:25:53 PMEvent ID:      0Task Category: NoneLevel:         ErrorKeywords:      ClassicUser:          N/AComputer:      V*******aDescription... Read more

More replies
Relevance 77.43%

Hello, I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes. I've been receiving these errors at boot; Log Name:††††† Microsoft-Windows-Kernel-EventTracing/Admin Source:††††††† Microsoft-Windows-Kernel-EventTracing Date:††††††††† 11/10/2009 7:51:03 AM Event ID:††††† 4 Task Category: Logging Level:†††††††† Warning Keywords:††††† Session User:††††††††† SYSTEM Computer:††††† herbt-PC Description: The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> † <System> ††† <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" /> ††† <EventID>4</EventID> ††† <Version>0</Version> ††† <Level>3</Level> ††† <Task>1</Task> ††† <Opcode>10</Opcode> ††† <Keywords>0x8000000000000010</Keywords> ††† <TimeCreated Sy... Read more

Answer:Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hey guys, the solution is simple - just increase the max file size! Go to:
 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot
 
The MaxFileSize key is a DWORD with a default decimal value of 20. Increase this to, say 60, and the problem will go away.
 
Luck to ya!

24 more replies
Relevance 75.69%

File "Description" data fields etc. no longer appear in the Windows Explorer "Details" pane. Please see attachment.

Operating system is Windows Vista Home Premium, Version 6.0.6002, Service Pack 2, Build 6002.

ID3 tag data can be edited using MP3Tag editor, but is no longer available for edit in the Windows Explorer "Details" pane.

Any advice about how to restore the data fields in the Windows Explorer "Details" pane would be appreciated.

More replies
Relevance 75.4%

I'm trying to find the settings called "ModemRingOn" and "PME Wake Up Event" both in bios but i can't find them.

Does anyone know where they are? Like under what options in bios?
 

Answer:Where are "ModemRingOn" and "PME Wake Up Event" located in bios?

They may not be there at all. If the modem is built into the board, maybe.
 

1 more replies
Relevance 75.4%

I'm trying to find the settings called "ModemRingOn" and "PME Wake Up Event" both in bios but i can't find them.

Does anyone know where they are? Like under what options in bios?

Answer:Where are "ModemRingOn" and "PME Wake Up Event" located in bios?

BIOS's vary widely; there is no standard features that are included. It's possible your BIOS has neither of them.

If these are features you are interested in exist, the first thing to do is to check the motherboard manufacturer's web site's "support" page, and find out what the latest version of BIOS is available for your motherboard, compare that to what you actually have on your motherboard, and then read the change log to see if possible these features were added.

You can also research these features by Googling the text "ModemRingOn" and the model number of your motherboard "GA-XYZ123" in the same search, in order to filter hits that are limited to those that include references to both of these qualities. Look for forum posts, and other technical sites & information.

Also, look for the User Manual for your motherboard on-line. Sometimes these include information on the BIOS of the motherboard.

1 more replies
Relevance 104.14%

Hi, I notice that the warning/error view messages now have reached 54320. I also append the EventData for your information.
EventData
SessionName       NT Kernal Logger
Error Code      3221225864
LoggingMode   306184576

Please advise how to get around with the issue. Many thanks in advance.

More replies
Relevance 103.73%

I have a message coming up titled "Failed to connect to a windows service"
and it reads -



?Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the
System Event Log for details about why the service didn't respond.?





Also, the task bar and menu <g class="gr_ gr_46 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar multiReplace" data-gr-id="46" id="46">turns</g> into
a classic style of windows randomly when this is happening. This started happening a couple weeks ago to one device regardless of what network it is connected to.



Does anyone have any ideas on how to fix this? We have already reset the NIC on the laptop to force all settings to DHCP to ensure DNS is being set correctly. Updated DHCP settings
to disable NetBIOS as it is deprecated and should not be used over DNS for resolution. And we have run the <g class="gr_ gr_45 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace" data-gr-id="45"
id="45">winsock</g> reset.



How many devices were affected? - Just oneAre you connected to a domain network? - YesWhen did the issue start happening? - The issue started a couple weeks ago and is getting worse

What we have done so far:

- ... Read more

More replies
Relevance 100.86%

What is the available number space for user-defined events?

Answer:Available event id # space for user-defined system events

/id EventID : Specifies the event ID for the event. A valid ID is any number from 1 to 65535.
That answers the first question.

I guess the question now is does it matter what number I use or will using the same id as a pre-defined system event cause an issue?

1 more replies
Relevance 100.86%

Guys,

Is there a way to get a full list of the possible events that can appear in the system event's log file?

I am working on a project through which I can get alerts on these errors, but I need to classify them.

Let me know what you can do.

Thanks.
 

More replies
Relevance 100.86%

I have deleted my show desktop button from quick launch. How can i get it back ?
 

Answer:Solved: How to retrieve "show desktop" button

11 more replies
Relevance 100.45%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 3325 Mb
Graphics Card: NVIDIA GeForce 9800 GT, 512 Mb
Hard Drives: C: Total - 466635 MB, Free - 283303 MB; D: Total - 10239 MB, Free - 3492 MB; G: Total - 476821 MB, Free - 37511 MB;
Motherboard: Dell Inc, 0PP150, A00, ..CN7082186G50HH.
Antivirus: Norton Security Suite, Updated and Enabled

Error message appears on startup, usually clears upon clicking "Try again", then computer runs normally. It appears to boot up somewhat slower as well.
 

More replies
Relevance 99.22%

My sys: Win7 64 bit Prem. Home Ed., AMD Phenom II X6, ASUS M4A88T-M socket AM3 mobo, 2X 4GB Corsair memory, 2TB Seagate Barracuda Green HDD, built Aug. 2012 by little ol' me.
My problem: Screen will freeze right after logging into user account, it will also freeze when we are in the middle of something (online or off line). Grrrr!. This happens more frequently to my husband (non-administrator) then to me (administrator). We try to go through normal shut down procedure and wind up having to force shut down. Sometimes we even have to purposefully crash it (unplug the tower).
When I check the Event Viewer I see over 3,000 events since Aug. 2012. Event ID 10 seems to proceed each instance of freeze. This is just one of about 20 different errors and warnings I'm finding in my Event Viewer.
Someone said to boot up in Safe Mode, find the "c:\windows\system32\wbem\repository" folder and delete it contents, then reboot normally twice. But he was talking about Vista.
My husband is upset , since we've spent close to a grand on this machine. I am confused to say the least and will appreciate any constructive help you can give.
Thanks!

Answer:New system, no BSOD, but frequent "___is not responding' Event ID 10.

Also, (in case this is important) I have Avast!, Spybot, AdAware & ccleaner installede on my system.

1 more replies
Relevance 97.58%

G'day everyone

After doing some Googling I discovered that it is impossible in Windows 7 to sort files by file extension -- one can only sort by file type, which depends on the file type description. This means that if I want to sort by file type, I need to rename the type descriptions of all my most commonly used files.

In addition, the only place where I can see a file's extension is in the file name itself, and not e.g. in the status bar when a file is selected. In Windows 7, the file type description (not the file extension) is also in the status bar.

In other words, in Windows 7 all files labelled e.g. "Opera Web Document" are sorted as if they have the same file type, regardless of whether they are .html, .htm, .mht, etc. And if I select a file and look at the status bar, the file's type is indicated as "Opera Web Document", without any clue as to the file extension. The only way for me to see the file extension is to increase the width of the "Name" column until the end of the file name becomes visible.

So... my question is:

Is there an easy way to simply rename the file type descriptions? I see that my JPG files are named "JPG File" and my PNG files are named "PNG" file, which is extremely useful. What I now want is to rename my HTML, HTM and MHT files' file types to "HTML File", "HTM File" and "MHT File", and the same would apply to all file types I often use (e.g. DO... Read more

Answer:How to easily change the "Type" description of file types in Explorer

  
Quote: Originally Posted by leuce


Is there an easy way to simply rename the file type descriptions?


I've discovered Default Programs Editor but that only does one file at a time, using a very long, cumbersome route. But... it works. Something quicker with the possibility to automate would be nice, though.

3 more replies
Relevance 97.17%

When checking the eventviewer->Windows Log->System and filtering 6006, the last entry was over 10 days ago.

Anyone out there having a clue why?

Thanks
=

More replies
Relevance 97.17%

Hello, I own an elitebook 8540w:

Windows 7 professional 64 bit
NVIDIA QUADRO FX 1800M
RAM: 8 Gb

I have noticed some daily hang up - lasting about 30 seconds: the only thing that seemed to work was the mouse pointer.
From the event viewer I see so many events like this:





Quote:
Event 17, WHEA-Logger

A corrected hardware error has occurred.

Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)

Bus:Device:Function: 0x0:0x3:0x0
Vendor ID:Device ID: 0x8086:0xd138
Class Code: 0x30400

The details view of this entry contains further information.


Attached are the lines of the event viewer of those events.

Fix it please.
Thank you.

Answer:Hang Up: elitebook 8540W: Why so many: "Event 17, WHEA-Logger" errors!

Same issue even after having upgraded to the latest INTEL Chipset:
Intel? 6, 5, 4, 3, 900 Series Chipsets 9.2.0.1030

1 more replies
Relevance 97.17%

Hello all. Seems like I have managed to screw up the default "Administrative Events" in the Custom Views section of the Event Viewer. I filtered it for warnings, etc., intending to save as a new definition, but in fact managed to apply the filter to the default definition itself. Doh! Now, I can't unfilter or delete it - the options are greyed out in the editor. Anyone know how to reset that item to default?

Using build 1703. Must be a bug that permitted me to edit that view in the first place?

Answer:How can I "Un-Edit" default view in Custom Views of the Event Editor

Can you take a screen shot of the greyed out thing you're talking about?

10 more replies
Relevance 97.17%

Below are my errors, keep in mind the MSI Gaming App (see final error) always does that, seems they broke it someway for anniversary edition and never fixed it. Any ideas what I should do to get rid of these?


Code:
The Open Procedure for service "BITS" in DLL "C:\Windows\System32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "ESENT" in DLL "C:\Windows\system32\esentprf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "Lsa" in DLL "C:\Windows\System32\Secur32.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "MSDTC" in DLL "C:\Windows\system32\msdtcuiu.DLL" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

Windows cannot load the extensible counter DLL rdyboost. The first four bytes (DWORD) of the Data section contains the Windows error code.

The Open Procedure for service &quo... Read more

Answer:Event Viewer Error The Open Procedure for service "ESENT" in DLL

I figured this out, nothing was wrong with Windows 10, running sfc /scannow returned no errors.

I ended up removing MSI Gaming App because they have yet to correct whatever is wrong, this got rid of that event for me.

I opened CCleaner and under Startup I figured some program must be causing these errors since I'd been clearing the event logs using Clear_Event_Viewer_Logs and they only occurred at startup. I discovered MSI Gaming App didn't remove it's startup entry neither did CoreTemp remove its scheduled startup (I took it off because I'm using Secure Boot and it isn't yet licensed to work with it.)

After deleting those I have no more errors. None. Really annoying!

1 more replies
Relevance 97.17%

I have the Purchased Retail Version of MR6 and have made several successful (NO Failed Yet) of my ENTIRE WIN 10 Computer (Image) onto my USB Seagate 1.5TB External HD.

In the Log I get this: Event ID: 513 Source: "Microsoft-Windows-CAPI2"

What does it mean ?? Looked all over the Internet but didn't find a "Fix" !!

Thanks !!

Wen

Answer:MACRIUM REFLECT - Event ID: 513 Source: "Microsoft-Windows-CAPI2"

Originally Posted by wen


I have the Purchased Retail Version of MR6 and have made several successful (NO Failed Yet) of my ENTIRE WIN 10 Computer (Image) onto my USB Seagate 1.5TB External HD.

In the Log I get this: Event ID: 513 Source: "Microsoft-Windows-CAPI2"

What does it mean ?? Looked all over the Internet but didn't find a "Fix" !!

Thanks !!

Wen



See here: http://knowledgebase.macrium.com/dis...in+Windows+8.1

Macrium support in their forum characterizes this as a "benign" event. See Nick's post at http://forum.macrium.com/Topic3154.aspx

Since you have paid version, you can register at this forum - will need to enter confirmation of paid status to complete registration. If you only want to browse and not post, no need to register.

5 more replies
Relevance 97.17%

I've just noticed frequent "A corrected hardware error has occurred" warnings in my event viewer dating back to October 16th of this year. As of now I haven't come across any performance issues or anything like that though.

I'm getting 2 different errors, with different processor IDs (0 and 1)

109844 System Warning 11/11/2013 9:24:49 AM Microsoft-Windows-WHEA-Logger 0 19 LOCAL SERVICE NAME 0 4044
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: 1
Error Type: 9
Processor ID: 0
109658 System Warning 11/11/2013 12:05:52 AM Microsoft-Windows-WHEA-Logger 0 19 LOCAL SERVICE NAME 0 4044
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: 1
Error Type: 9
Processor ID: 1
Here's my processor, and general PC Specs, the machine came packed with Windows 8, but I downgraded to 7 Ultimate SP1 x64.
AMD A8-5500

TDP: 65W

Operating speed: 3.2 GHz (up to 3.7 GHz turbo)

Number of cores: 4

Socket: FM2

http://h20000.www2.hp.com/bizsupport...riesId=5295962

And if it's of any value, according to Speccy my PC temps seems to sit in the mid-high 50's, with Jumps into the 60's and low 70's.

Answer:WHEA-Logger Event ID: 19 "A corrected hardware error has occurred"

Welcome to sevenforums!

This was given to me by "essenbe" member forum. Might this WHEA Error Alert Guide helps you!

5 more replies
Relevance 97.17%

Hello All - I ran into an issue where Outlook 2010 (Calendar) does not show certain options for a Calendar Event. Meeting that has been received and accepted, when opened does not have option of "Respond" and once that button is clicked drop down menu should display "Reply, Reply All... Reply with IM, etc."

Here is the screen-shot of it and how it is supposed to look like.. just not seeing it on my computer:
Note: I did notice when someone schedules an appointment in Calendar this option is not available; but other meeting invites co-worker of mine does have and I don't. Complete the same environment, same machines, same OS image (W7 64-bit Enterprise - company computers). Also, company IT is looking into this and so far they have not been able to find the culprit of this issue.

Thanks all!

Answer:MS Outlook 2010 / Calendar event missing "Respond" (Reply All, etc.)

Hi CarDusan,

Means you are missing the section (Change Response) through which a user can accept or decline events or Outlook appointments.

This issue arises when the following data file exists in the Windows Registry (with the values):

Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Calendar

DWORD: DisableResponseButtons
Value: 1

Use the given "Fix it for me" solution provided by Microsoft.
Manager is unable to respond to a meeting invite

Thanks
Clark Kent

2 more replies
Relevance 97.17%

Dear Forum people,

I have just reinstalled my desktop 2 days ago, and now I am having random restarts/crashes. I cannot correlate to any specific software or task when it happens.
I have also updated my BIOS to the newest version before Win7 reinstall. I have only a couple of programs installed so far, and the newest drivers for my motherboard, videocard, etc...

I already did MEM test, but the RAMs looks ok.
I have also attached the zip file created by the SF Diagnostic Tool as it was described.

Any help is welcomed!

(ps.: I have licenced win7 ultimate + Bitdefender Antivirus Plus)

Answer:random restarts --> "Problem Event Name: BlueScreen Locale ID: 1038"

Post this report:Activation Issue Posting Instructions

9 more replies
Relevance 97.17%

Hello all. Seems like I have managed to screw up the default "Administrative Events" in the Custom Views section of the Event Viewer. I filtered it for warnings, etc., intending to save as a new definition, but in fact managed to apply the filter to the default definition itself. Doh! Now, I can't unfilter or delete it - the options are greyed out in the editor. Anyone know how to reset that item to default?

Using build 1703. Must be a bug that permitted me to edit that view in the first place?

More replies
Relevance 97.17%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping t... Read more

Answer:Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 97.17%

When checking the eventviewer->Windows Log->System and filtering 6006, the last entry was over 10 days ago.

Anyone out there having a clue why?

Thanks
=

More replies
Relevance 97.17%

Below are my errors, keep in mind the MSI Gaming App (see final error) always does that, seems they broke it someway for anniversary edition and never fixed it. Any ideas what I should do to get rid of these?


Code:
The Open Procedure for service "BITS" in DLL "C:\Windows\System32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "ESENT" in DLL "C:\Windows\system32\esentprf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "Lsa" in DLL "C:\Windows\System32\Secur32.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service "MSDTC" in DLL "C:\Windows\system32\msdtcuiu.DLL" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

Windows cannot load the extensible counter DLL rdyboost. The first four bytes (DWORD) of the Data section contains the Windows error code.

The Open Procedure for service &quo... Read more

Answer:Event Viewer Error The Open Procedure for service "ESENT" in DLL

Please note: This section is exclusively for BSOD errors not System event viewer errors.

1 more replies
Relevance 97.17%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 97.17%

Hello.

I'm having a peculiar problem that just started yesterday out of the blue. Suddenly when I boot up in Windows 7 (64-bit), there's always an open dat file titled "win403700" that greets me on my desktop. It's of no use to me, since it's filled with lines and lines of code that are completely encrypted in notepad.

After running CCleaner to clean out my registry and hard drive, followed by over two hours of sytematically uninstalling programs, disabling startup items, and then finally moving on to msconfig items under the services tab, I was able to determine that "Windows Event Log" is what causes this to pop open with each new startup. (I assume everyone has it enabled under msconfig > services.)

Would anyone know why it is doing this? If I can just disable it and forget about it I will, but based on what I'm reading here, it appears to be an essential process for updating Windows:

Windows Event Log - Process and Service wiki

Plus I would like to know if this is an indicator of a more serious problem. (A Malwarebytes scan did come back clean by the way.)

Thanks.

Answer:Windows Event Log causing "win403700" to autostart at boot

I am having the exact same problem, also on Win 7 x64 except that the file that's popping up in notepad for me is "win403750.dat."

Most of the file is binary gibberish but there is a string near the beginning that reads "This program cannot be run in DOS mode," which makes me think that this .dat file is an executable. I've tried renaming it to an .exe extension and running it, but Windows says that the file isn't compatible with the version of Windows I'm running. An ESET scan of the file comes out clean.

I also distinctly remember that this started happening after the latest Windows update(s) I ran 1~2 weeks ago.

@rennervision: Have you solved or discovered more about this issue?

4 more replies
Relevance 97.17%

Hey guys I recently re installed win 7 home premium and a few days later when logging it said preparing desktop, as if it was the first time Ih ad logged in. When it finally logged in my desktop seemed to have been reset, it only had recycle bin, itunes (which had to reinstall after clicking it) firefox and thunderbird and I had to go to program files to find the programs I had and pictures etc weren't in the my pictures folder.

Put everything back in place and now it's happened again right now but this time noticed the bubble on bottom of screen and to check event log. The event viewer says Event 5038 Microsoft Security Auditing and also says Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unaurthorized modification or the invalid hash could indicate a potential disk device error.
There is also this I cope and pasted below

+ System - Provider [ Name] Microsoft-Windows-Security-Auditing [ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
EventID 5038 Version 0 Level 0 Task 12290 Opcode 0 Keywords 0x8010000000000000 - TimeCreated [ SystemTime] 2010-07-01T11:31:06.966796800Z
EventRecordID 16663 Correlation - Execution [ ProcessID] 4 [ ThreadID] 44
Channel Security Computer Anthony-PC Security
- EventData

param1 \Device\HarddiskVolume1... Read more

Answer:Desktop "resets" event 5038. Audit Failer

Download TFC by Old Timer TFC - Temp File Cleaner by OldTimer -> Anti-malware Tools -> Downloads and save it to your desktop.

Save any unsaved work. TFC will close ALL open programs including your browser!

Using Vista/Windows 7 right-click on the file and choose Run As Administrator.

Click the Start button to begin the cleaning process and let it run uninterrupted to completion.

Important! If TFC prompts you to reboot, please do so immediately. If not prompted, manually reboot the machine anyway to ensure a complete clean.

Tell us if this helps

4 more replies
Relevance 97.17%

Hi, have just tried to do a clean install of windows 7 64 bit on my new PC. I have been into the bios to make sure it is set to boot from DVD, all good. I then insert the windows dvd, drawer closes, disk spins, I get to the "windows transfering files" bar at the bottom of the screen, all good. Then the "Starting windows" message appears (without the colourful swirl in the background, just words) and thats it!!! It seems to lock on that screen? My motherboard has a LED code AE - Legacy Boot Event? What does this mean and is this stopping windows from booting? Please any help is much appreciated!. System specs- i7-2700k, maximus iv gene-z, g-skill 16gb, ocz 120gb, seagate barra 2tb, gtx 570, kuhler 920, ocz 750w, pioneer opt. antec df-85.

Answer:"Legacy boot event" what does this mean? Windows 7 wont load?

Boot into Setup (Bios) What is the HDD mode set to? Is set to IDE or AHCI? Also set the Bios to Default. Also check again in Boot Priority again to make sure CD/DVD rom drive is First Boot Device.You may need to do a Bios Update.

15 more replies
Relevance 97.17%

Does someone has any idea what this error means and above all ... how to avoid this?

Thanks
=
Type : Error
Date : 25-08-2015
Time : 10:42:14
Event : 3
Source :Microsoft-Windows-Kernel-EventTracing
Description: Session "ReadyBoot" stopped due to the following error: 3221225864
=

Answer:Event ID 3 - Session "ReadyBoot" stopped - error: 3221225864

Anybody out there knows what these errors mean and how to avoid them?

Thanks
=

Type : Error
Event: 103
Source: Microsoft-Windows-TaskScheduler
Description: Task Scheduler failed to start instance "{B8A1B72D-DFBA-41A9-A6F2-3CB2EAB79719}" of "\Microsoft\Windows\NetCfg\BindingWorkItemQueueHandler" task for user "NT AUTHORITY\SYSTEM" .
Additional Data: Error Value: 2147942402.
Type : Error
Event: 202
Source: Microsoft-Windows-TaskScheduler
Description: Task Scheduler failed to complete task "\Microsoft\Windows\NetCfg\BindingWorkItemQueueHandler" , instance "{B8A1B72D-DFBA-41A9-A6F2-3CB2EAB79719}" , action "Binding Engine Task Handler" .
Additional Data: Error Value: 2147942402.

=

2 more replies
Relevance 97.17%

Lately several of my programs have been unable to start giving the same error.

example:
Description:
Stopped working

Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: ds3_tool.exe
Problem Signature 02: 0.6.0.3
Problem Signature 03: 4fade72a
Problem Signature 04: DS3_Tool
Problem Signature 05: 0.6.0.3
Problem Signature 06: 4fade72a
Problem Signature 07: 34
Problem Signature 08: c1
Problem Signature 09: System.TypeInitialization
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

What causes this?

Answer:"Program" has stopped working Problem Event Name: CLR20r3

Try this

1. Click Start button, click All Programs, click Accessories, then right-click Command Prompt, in the right click menu, please click Run as administrator.
2. Type the following commands, press Enter after each line.

regsvr32 atl.dll
cd C:\WINDOWS\eHome
ehSched /unregServer
ehSched /service
ehRecvr /unregServer
ehRecvr /service
ehRec.exe /unregServer
ehRec.exe /regserver
ehmsas.exe /unregServer
ehmsas.exe /regserver

9 more replies
Relevance 97.17%

Log Name: System
Source: volmgr
Date: 12/4/2007 2:48:06 PM
Event ID: 46
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Home
Description:
Crash dump initialization failed!
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="volmgr" />
<EventID Qualifiers="49156">46</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2007-12-04T19:48:06.937Z" />
<EventRecordID>21840</EventRecordID>
<Channel>System</Channel>
<Computer>Home</Computer>
<Security />
</System>
<EventData>
<Data>\Device\HarddiskVolume1</Data>

<Binary>0000000001000000000000002E0004C001100000010000C000000000000000000000000000000000</Binary>
</EventData>
</Event>

Answer:Plese Help "Event ID 46 Crash Dump Initialization failed!"

*up*

I get this very same error every time I boot (startup, not shutdown). It appears twice in the system log ("Crash dump initialization failed!" by volmgr with event id 46). I have absolutely no issues with my Vista but I'd like to get rid of this error nevertheless. So far I've been unable to track the source of the problem.

I have SP1 and the latest updates installed.

3 more replies
Relevance 97.17%

In trying to get a solid grasp on PerfMon features, we were wondering what the best use of "event traces" would be and what is the info that it provides. Thanks.

Answer:In PerfMon, what type of info does "event traces" provide?

Event traces uses the timer/information gathered from the Event Tracing for Windows subsystem (ETW). This is the same sort of information you'd get from taking traces using xperf or xbootmgr from the Windows Performance Toolkit. Not to the depth you'd get, but fairly close.

1 more replies
Relevance 97.17%

since about 3 months ago, my computer has been experiencing multiple BSOD's per day. upon looking in the event viewer, ever single time and event with something to do with a "VSS service" is the last thing before the crash. i find this strange, as looking into this, vss is a backup program for xp and server 2000. i have no idea why this is on my system, what it does, or why i need it. after trying to use some debugging tools, it seems that i cannot access the .dmp files on my own computer, logged in as an administrator, with full privileges, with all file security options in my anti-virus off. my system is a x32 vista business. the crahses occur almost at random, doing anything from playing a game, using Firefox, typing a notepad file, or just leaving the thing on and not doing anything for more than 10 minutes. the system will still crash at the log in screen, leaving me to believe that this is not an overheating issue. i have tried to disable all programs with mscofig, but i still get a crash. i have even had crashes in sleep mode, as well as in the process of a normal shutdown. i have no new updates in windows update, and have installed all of the new drivers for every device i can find them for. any and all help would greatly be appreciated.
 

Answer:frequent BSODs with event viewer pointing towards "VSS service"

Hi this is about vss and what you can do with it http://www.mydigitallife.info/2007/...tem-restore-disk-space-limit-in-explorer-gui/
 

2 more replies
Relevance 97.17%

During my attempt to troubleshoot some Vista behavior, I checked the logs in the event viewer. While doing that, I noticed under "Security" that the log was humongous. The reason? Every minute, there is a "Special Logon" followed by two "Logon" entries. This just keeps repeating every minute. I cleared the log and rebooted... then monitored the log and the behavior continued.

Why does this happen? Is there some kind of logging that was accidentally turned on? I can't recall what I might have done, as I had to do quite a bit of troubleshooting with another problem... is there something I can check that controls logging? I tried searching the Vista forums and didn't turn up anything matching "Special Logon".

Answer:"Special Logon" repeats every minute in Security Event Log

Are you able to get a Snip of the Log?

Please see How to Use the Snipping Tool in Vista For More Information

Also does the Log provide any Username?

Many Thanks,
Josh

7 more replies
Relevance 97.17%

several times i am having a problem which gives below error report.suddenly appear blue screen message and laptop is going to restart quickly and even there is not a time to read that blue screen message...i have attached diagnostic report folder(according to the instruction of Blue Screen of Death (BSOD) Posting Instructions)...i hope really good answers from you...

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000005
BCP4: FFFFFA8005751C80
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\090212-35037-01.dmp
C:\Users\Tharinda\AppData\Local\Temp\WER-69342-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:error with automatically restart -"Problem Event Name: BlueScreen"

The problem is with a driver usbhub.sys. Hopefully this can be fixed quickly. Remove all of your usb hardware, printer, usb drives etc. If the system does not crash reinstall one by one, giving the computer time to crash before installing the next.
If this does not work, go to device manager and uninstall the universal serial business controllers one by one. Reinstall before uninstalling the next.Hopefully this will solve your problem
Before taking any actin make a system restore point just in case

1 more replies
Relevance 97.17%

Hi All,

I've had an issue with Event viewer unable to start due to "endpoint mapper database entry could not be created" Error 1899. I have done a SFC and have had some but not all issues fixed, I have a log of the result and maybe could post if needed. I've also done a system restore to a previous working config but no luck, the problem still persists. Has anyone had experience with this issue and know a fix for it?

Regards
Hiconic

Answer:cannot start event viewer "Error code 1899"

It's no wonder people slag off Microsoft for the lack of support. This issue has effectively stopped me from doing any back up on my PC as without the Event logging service or Event viewer service running the Back up cannot be set as it's dependent on these services which are hog tied by this endpoint mapper issue! Another Windows endless catch 22 loop!!

I can't believe no one has anything to offer on this issue! I've seen this issue raised on several forums but as yet no one seems to have the solution, which begs the question where are all the experts out there specializing in Windows 7? Suddenly, nothing happened!!

Hiconic

4 more replies
Relevance 97.17%

Does someone has any idea what this error means and above all ... how to avoid this?

Thanks
=
Type : Error
Date : 25-08-2015
Time : 10:42:14
Event : 3
Source :Microsoft-Windows-Kernel-EventTracing
Description: Session "ReadyBoot" stopped due to the following error: 3221225864
=

Answer:Event ID 3 - Session "ReadyBoot" stopped - error: 3221225864

Anybody out there knows what these errors mean and how to avoid them?

Thanks
=

Type : Error
Event: 103
Source: Microsoft-Windows-TaskScheduler
Description: Task Scheduler failed to start instance "{B8A1B72D-DFBA-41A9-A6F2-3CB2EAB79719}" of "\Microsoft\Windows\NetCfg\BindingWorkItemQueueHandler" task for user "NT AUTHORITY\SYSTEM" .
Additional Data: Error Value: 2147942402.
Type : Error
Event: 202
Source: Microsoft-Windows-TaskScheduler
Description: Task Scheduler failed to complete task "\Microsoft\Windows\NetCfg\BindingWorkItemQueueHandler" , instance "{B8A1B72D-DFBA-41A9-A6F2-3CB2EAB79719}" , action "Binding Engine Task Handler" .
Additional Data: Error Value: 2147942402.

=

2 more replies
Relevance 97.17%


In this video, Microsoft will be delivering a live presentation from its Redmond, Washington campus to provide more details on its upcoming Windows 10. For those who missed this, you can watch this video.

The event start at min - 33.

Enjoy!
 

Answer:"Windows 10: The Next Chapter" - Microsoft Live Event (VIDEO)

...or you can watch her - http://news.microsoft.com/windows10story/
 

4 more replies
Relevance 97.17%

I recently swaped out a power supply to replace a broken one in another computer. Now this computer has no power supply, but I have another spare ATX that fits, so I screwed it into the computer, powered it up, and it works. Except after like 3 mins the fans seem to die down. After another minute, the computer gives a "Computer shutdown due to thermal events" error. Does this mean I put in the wrong type of power supply? Is the fan messed up?
 

Answer:Power supply causing "Thermal event error"?

It probably means it is not sufficient power or is dying.
 

1 more replies
Relevance 97.17%

Three times in the last 24 hours this warning has opened on my Desktop, after I have just closed Windows Live Mail [WLM] . After the warning disappears from the Desktop, WLM opens yet again.

Naturally I've allowed the issue to be reported to MS and sent the information, but I note that there is also a File that describes the event, in this case:

C:\Users\Tony\AppData\Local\Temp\WER21C8.tmp.hdmp

Is there any way that I may attempt to either fix or resolve this issue myself? For starters, I haven't a clue about how I access the quoted File, and if I did, I don't know what to do with it anyway.

Or is this yet another of those situations where you just grin and bear it until MS come up with something to resolve the issue? Hope not 'cos it's mildly annoying...

Answer:"Windows Live Mail has stopped working" - Files describe event; Fix?

1) Ignore error message.
2) Do a "repair" of Windows Live Essentials via Programs and Features
3) Use the Disk Cleanup utility
3) Use sfc /scannow via the command prompt window.

7 more replies
Relevance 97.17%

My Windows 7 configuration is relatively bullet proof (ha ha, nervous laughter).

My OS and programs are on C, which I image using RDriveImage every month after Patch Tuesday.

My data is on software-mirrored D/F drives.

So as long as I don't have a catastrophic event affecting my computer, a routine "drive failure" should be recoverable, with the worst-case being I'd be out a month of updates, but with a good recent image of the OS drive.

Anyway, I was recently looking at my event viewer and I have "Disk errors" that occur whenever I run a full image of C.

The complete error text is:






Quote:
Log Name: System
Source: Disk
Date: 7/13/2012 3:38:44 PM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxx
Description:
The driver detected a controller error on \Device\Harddisk3\DR3.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Disk" />
<EventID Qualifiers="49156">11</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-07-13T19:38:44.199218700Z" />
<EventRecordID>136049</EventRecordID>
<Channel>System</Channel>
<Computer>xxxxx</Computer>
<Securi... Read more

Answer:"Disk error" invisible except to event viewer, when imaging hard drive

Try going into your BIOS to see what it has to say about the drive. Some BIOS's can read the drive's SMART status and can run tests on it. You could also download the disk manufacturer's drive diagnostics to check it out. Or see what Seatools (from Seagate) has to say about it:

SeaTools | Seagate

9 more replies
Relevance 97.17%

Hello and thanks for taking the time to look at this.

I'll try to keep this as short (yet detailed) as possible. History:
1. I bought this laptop about 3-4 yrs ago.
2. Touchpad stopped reacting to touch about a year+ ago. I use a mouse.

3. Green text here has been updated and clarified: I've received messages from my internet provider saying a toolbar update needs done and that all browser windows will be closed and I'll be prompted to restart the computer. I click the X and it says "the toolbar update cannot continue without administrator credentials. An administrator can update the software after 24 hrs has elapsed." There's never been an administrator set up on this computer that I know of so that seems like an odd message.

4. I've also noticed that for some reason the memory load slowly increases (as viewed on task manager), and the computer slows down, even if I don't do anything other than leave those browsers open. Maybe this is normal but I don't know so I thought I'd mention it.

5. Ok, a few days ago the computer froze up (like many people, this has happened before and wasn't extremely concerning). Not sure exactly why it froze but I often leave the computer on for weeks at a time while I'm working/researching numerous things. I'll usually have 1-4 internet windows open (with multiple tabs in each window) during that time. So, with the computer unresponsive I have to push/hold the pwr button to tu... Read more

Answer:Strange "Incorrect Password" event, trouble w/ HijackThis & GMER, etc = Big worries..

16 more replies
Relevance 97.17%

Hi
I have just installed ATA 1.6 and using the Lightweight Gateway on all our DC's.

After I have enabled and configured event forwarding I see a lot of "Identity theft using pass-the-hash attack" alerts, and there is way to many for me to believe that we have been hacked/under attack.
Have any of you any ideas of what I might be doing wrong?

More replies
Relevance 97.17%

I recently came across a "corrupted" laptop (love how people call things to do with computers corrupted when they can't figure out how to fix it) to fix, it's a Dell Latitude D630 with windows xp home installed.

When i got it, booting up to windows would result in blue screen error after windows xp loading screen 100% of the time in normal mode, and would hang on mup.sys in safe mode (left it booting into safemode for about 6-7hours while i slept at mup.sys and never loaded past it). I decided to do a repair install, got through it all perfectly fine, entered the product key from the sticker on the bottom, worked fine. Booted up again, got past the xp screen to login screen and got the message "this copy of windows must be activated with microsoft before you can log on" can choose "Ok" or "Close" i believe, basically yes or no.. reguardless of what i click, it loads into windows to the desktop, and does not load anything else. ctrl+alt+del doesn't bring up taskmanager. in safemode everything works how it should, msconfig running processes are all normal, nothing out of the ordinary, as well as in services, closed everything except critical processes/services, made a new user as well and logged into that account, get the same activation message and loads to desktop with no icons and still no ctrl+alt+del/start menu/icons/any keyboard shortcut, however windows security center popped up on new account saying there was no anti-virus (woo... Read more

Answer:[SOLVED] Desktop won't load on dell laptop after &quot;windows must be activated&quot; event

should also include that after repair install loading back into windows after 3rd reboot when it's finished it would get to the windows xp loading screen and hang there without ever loading windows, but once i shutdown and turned it back on it would load fine. (fine meaning it would get to the login screen and just not work anymore)

1 more replies
Relevance 96.76%

Good evening. I've got something weird going on I'd like to ask for help with. Every time I close the Event Viewer or Task Scheduler I get a new "Administrative Tools" folder on the desktop. As far as I know, no other programs cause it, at least none of the ones I tested. I'm not exactly sure when it started but I know it hasn't always done it. I've already got Administrative Tools folders in my Start Menu. Anyone know what could be causing it? Thanks.

Answer:"Administrative Tools" folder created on desktop every time I close Event Viewer

Walt
Sounds like a change in your settings. To be sure
Run a full anti virus scan
Download and run a full scan with Malwarebytes to be sure we are not talkling about a virus
If all are negative, go back with System Restore to a week before the problem began.
System Restore - How to

7 more replies
Relevance 96.76%

Hi there,

I am running Windows 7 Home Premium 64bit (OEM) Service Pack 1

Hardware is 11 months old.
- Dell Inspiron 1764
- i3 CPU @2.40 GHz
- 4 GB Ram
- ATI Mobility Radeon HD 5450 Series

The system will periodically go to blue screen and restart, I cannot seem to update windows either.

This is the error message

Problem Signiature:
Problem Event Name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 6153

Additional Information about the problem:
BCCode: d1
BCP1: 0000000000000028
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88001596B2D
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768 1


I hope this is enough information,

Thanks a million,

Eamonn

Answer:BSOD help needed. Problem event name "BlueScreen"

Looks to me as if it involves USB and networking - so I'd have to suspect your "Air card" device.
Please:
- download a fresh copy of the drivers from the service provider's website. Ensure that they are Win7 compatible.
- uninstall the current driver software from your system
- install the freshly downloaded copy and monitor for further problems.

There are numerous drivers dating from 2009 or earlier. Please scan the list below and update those older drivers. The links below the table will show info on where to get updates for those drivers.

You have an old copy protection program that dates from 2006 - please uninstall that. It most likely came from a program installed from a DVD that had a movie on it. If unable to locate it/uninstall it - please post back for a safe way to remove it.
It appears that you also have AVG and McAfee installed - not a good thing!!!

Please uninstall AVG, then do the following to remove McAfee (there is a place to add another antivirus in the instructions) - but I'd like you to do it this way in order to minimize potential problems.






Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the McAfee from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of McAfee using this free tool: http://service.mcafee.com/FAQDocument.aspx?id=TS100507
- IMMEDIATELY install and update the free... Read more

1 more replies
Relevance 96.76%

1- this is my result in event viewer
http://img96.imageshack.us/img96/3197/26608902.png
and all i can see is " warning " and " error "
should i be worried ? and how can i solve the problems ?

2- i just changed my theme ... and the computer makes sound when i enter or exit a folder ... basically when i do anything ... how to mute the theme's sound ?

thanks : )

Answer:My result in the " event viewer " ... and theme problem

I can't help you with #1 but I'm sure someone here can certainly do so.

As to #2, go to your "personalize" options by right clicking on the desktop, select "Personalize" then select "Sounds" at the bottom of the Personalization Options window.
That will bring up the dialog pictured below. Your scheme (in the red box) will be different than mine. Just go to the blue box and change your sounds to your heart's content.

Note: the red and blue boxes are only for clarification - you will not see them.

9 more replies
Relevance 96.76%

Hello, I own an elitebook 8540w:

Windows 7 professional 64 bit
NVIDIA QUADRO FX 1800M
RAM: 8 Gb

I have noticed some daily hang up - lasting about 30 seconds: the only thing that seemed to work was the mouse pointer.
From the event viewer I see so many events like this:


Quote:




Event 17, WHEA-Logger

A corrected hardware error has occurred.

Component: PCI Express Root Port
Error Source: Advanced Error Reporting ( PCI Express)

Bus:Device:Function: 0x0:0x3:0x0
Vendor ID:Device ID: 0x8086:0xd138
Class Code: 0x30400

The details view of this entry contains further information.




Attached are the lines of the event viewer of those events.

Fix it please.
Thank you.

Answer:Why so many: "Event 17, WHEA-Logger" errors and Hang ups!

Hello,

You might start with some hardware tests:

RAM - Test with Memtest86+ - Windows 7 Forums

Run all three Prime95 tests: CPU - Stress Test with Prime95 - Windows 7 Forums

9 more replies
Relevance 96.76%

Hi All,

I am currently planning to write a script that will monitor the security event log for certain events like the creation of user accounts, changes to policies, etc. The testing is done on a Windows 2000 server. The local policies have success/failure audit on all items available.

So what I started to do was to start testing what security events get generated when I perform different actions like changing policies and creating and modifying user accounts.

There appears to be some issue with the generation of Success event for some of the User Rights Assignment. According to Microsoft it is supposed to generate an event with ID 608. Something similar to

Event ID: 608 (0x0260)
Type: Success Audit
Description: User Right Assigned
User Right: %1
Assigned To: %2
Assigned By User Name: %3
Domain: %4
Logon ID: %5

The following rights that I tested were not able to generate this event when I added a user to this right. It was able to generate the event 609 (User Right Removed) with no problems.

The following are the rights that have this issue. These are the ones that I want to monitor specifically.

- Access this computer from the network
- Deny access to this computer from the network
- Deny logon locally
- Log on locally

I read some article about (NT 4 that says that these events are not generated, but nothing pertaining to Windows 2000 )

http://support.microsoft.com/kb/163905/en-us

So I think that this may be done by design, but it seems strange that it will gen... Read more

More replies
Relevance 96.76%

I'm getting this message when I right-click on a day in Calendar version 8.0 and select "New event":      "You don?t have permission to modify this event."     "The owner of this calendar doesn't allow you to create these items."(please see attached Screen Shot 2015-04-29 at 9.35.06 PM   Wednesday  4-29-15.png)What to do?HALP !!!

Answer:Yosemite Calendar v8: "You donít have permission to modify this event."

Are you the one who entered the event?Can you enter a new event?I see you also posted this on another forum.Almost a year ago? No solution?The workaround is to stop using it and get another Calendar application.Best Calendar Apps and Utilities for MacThat's all I can tell you. 

1 more replies
Relevance 96.76%

how do I do this?
for attempted troubleshooting a horribly slow black-screen boot situation I imported a worthless "custom view" in Event Logging. How do I undo that?
countless MS articles on how to create and "work with" but none clearly say how to get rid of it.

and for that matter: how do I get rid of auto-created custom views that past programs insinuated into my Logs without telling me! ??

thank you in advance

More replies
Relevance 96.76%

I'm running Win XP Home - SP1. I just learned about the Event Viewer (Control Panel/Admin Tools) and the Security section shows a number of Anonymous Logons. It also shows Guest Logons, etc, along with "Failed Audits", indicating wrong passwords. Every other "Failed Audit" shows "MICROSOFT_AUTHENTICATION_PACKAGE_V1_0", with the following one showing my name.

I do have a home network with a wireless router. Only the laptop wireless card and PC network card MAC addresses are cleared for access. My closest neighbor is over 800 feet away so I'm confident that I'm not being accessed locally.

Any idea what this is all about?

Thanks.
 

More replies
Relevance 96.76%

About 2 days ago, my computer started randomly turning off and on. I would enter my password and it would load windows and run fine. As of yesterday it shut itself down and after I entered my password, it would give me that message. I would choose "Run Windows normally" and it would go to the screen with the Windows logo with the loading bar underneath of it. The loading bar doesn't have the scrolling green light though, and it just sits there. Any help is greatly appreciated.
 

Answer:"Alert! Previous shutdown due to thermal event!"

9 more replies
Relevance 96.76%

I have had recurring "Errors" in my Event Viewer files that reference "Application hang" and Category 101/Event 1002 OR Catergory (none)/ Event 1001. Can some one enlighten me as to what may be the cause of this problem. Thanks. {redoak}
 

Answer:Solved: Recurring "Error" in Event Viewer

7 more replies
Relevance 96.76%

Whenever I launch Event Viewer, I get this message. Ditto when I try launching Computer Management. I sometimes get a message about Adding a snap-in to console. But it never works. I ran SFC SCANNOW and it fix some stuff requiring a restart and is running clean now. No improvement.

I tried going back to an image from several weeks ago. Event Viewer worked but when I ran SFC SCANNOW and restarted, it stopped working again. If I run mmc.exe, I get a single folder Console Root. Trying to launch Event Viewer from the File menu crashes it. Running services the same way works. Running Component Management crashes.

Any ideas?

Thanks

Answer:Windows 7 x64 "Event Viewer has stopped working"

Check your system for BUGS. It is infected. That or the hard drive is corrupted and starting to fail.

These things don't Just Happen. Windows 7 is a very good operating system and does not have these problems unless something causes them.

3 more replies
Relevance 96.76%

WinXP Media Center Edition SP3 - there are numerous "warnings" in the Event Viewer in the 'System' section. Each time the warning shows up (about every 2-4 days), there will be at least 5-6 in a row, sometimes as many as 15 all in group. Here's the message (a screen shot is attached below also):




Event Viewer said:



Event Type: Warning
Event Source: Disk
Event Category: None
Event ID: 51
Date: 2/6/2011
Time: 8:14:29 PM
User: N/A
Computer: OWNER-EF6521BE4
Description:
An error was detected on device \Device\Harddisk0\D during a
paging operation.Click to expand...

The owner of the PC is convinced the new hard drive I installed about a year ago is failing because he'd get occasional BSOD crashes, but I ran 2 different diagnostics on the drive, and both passed 100% (one was the Seagate 'Seatools' bootable diagnostic; it's a Seagate 320gb SATA drive). The system passed an extended RAM diagnostic (I knew the RAM was OK, but I ran the test just to be thorough). I'm researching the message right now, but haven't found much.... any thoughts?

Thanks!

(I've been using the PC for about 6 hours now w/o any problems, but then again, the warnings don't necessarily show up every day; sometimes there's 4-5 days with no warnings)
 

Answer:Numerous "warnings" in Event Viewer (WinXP)

Upon looking at the Event Viewer messages a bit closer, I found that there's a few of these identical warnings that refer to "\Device\Harddisk1\D" but the vast majority refer to HD0\D. There is only one hard drive in the PC.....
:confused

EDIT - a bit more digging, and I discovered that the "iPod Service has entered the running state" occurs about 40sec before a string of the warnings starts; the iPod service is not listed right before the warnings every time, but it is on all but 2 out of a total of 12 or 13 'runs' of the paging warnings.... a connection between the iPod and the paging problems?
 

3 more replies
Relevance 96.76%

I noticed a new Error in the Windows System Event Viewer logs, one I haven't seen before. Event ID 36, Source Volsnap: "The shadow copies of volume C: were aborted because the shadow copy storage could not grow due to a user imposed limit."

I don't recall ever setting such a limit... I don't really need shadow copies. I've never made use of them, as I backup my computer to image files on an external hard drive.

That said, I'd like to be able to address the error one way or another.

What should I do? Details of event are below.

Thanks for any info!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Volsnap" Guid="{cb017cd2-1f37-4e65-82bc-3e91f6a37559}" EventSourceName="volsnap" />

<EventID Qualifiers="49158">36</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x80000000000000</Keywords>

<TimeCreated SystemTime="2017-02-21T03:54:13.439234600Z" />

<EventRecordID>68672</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="5268" />

<Channel>System</Channel>

<Computer>DESKTOP-NDLCEAK</Computer>

<Security />

</System>
- <Event... Read more

Answer:"Shadow Copies of volume C: aborted" (Event ID 36)...

Hi,
You're running out of disk space.
Right click the start button and select System then System Protection.
Either delete some old restore points or augment the disk space these can occupy.

Cheers,

20 more replies
Relevance 96.76%

A few questions:


1. What is "Object Name: \sbox_alternate_desktop" ?

2. I've rarely seen "Accesses: MAX_ALLOWED" - any way to find out why this would be happening?
3. What does "Restricted SID Count: 1" and "Restricted SID Count: 4" mean?

4. Why are there "SymbolicLink" Object Types? What does "Accesses: Use symbolic link" mean?


These screenshots show the events I'm referring to: imgur.com/a/HWxTn

More replies
Relevance 96.76%

Hello All-

I am getting this Error at every boot: "Session "ReadyBoot" stopped due to the following error: 0xC0000188."

System Basics:

> Dual-Boot Windows 7 and 8 (64 bit), each on its own hard drive (recent clean installs).

> Boot Manager is on the Windows 7 disk.

> I get this error on the Windows 8 OS only.

I've tried disabling ReadyBoot in Performance Monitor, but it re-enables at startup or restart.

Microsoft (for Windows 7) says to ignore, but it's making me crazy since I don't recall seeing it until recently, and can't think of any changes I've made that would be relevant.

Any suggestions?

Rob

Answer:Error Event ID 3 Session "ReadyBoot" stopped

are you actually expecting any help from this useless forum?

1 more replies
Relevance 96.76%

Hello everyone and thank you so much for reading and helping me.
Let me first explain that I am running Windows Vista Pro. For the past few days, my computer has been freezing up as I have been browsing the web. Ctrl+Atl+Del does nothing, I wait to see if Firefox will respond to no avail. I am forced to do a hard shut-down. When I restart, the computer works well for a few hours, even a day or so. Then the freezing repeats.
My computer is up to date with all updates from Microsoft, the Microsoft Firewall is turned on and I have Symantec Anti-Virus up to date and running. (Actually I'm pretty compulsive with updating.)
So I decided to look at my event viewer to see if I could find out what was wrong. BINGO. Every time my computer has frozen up in the past few days, an event is logged as the following:
"An anonymous session connected from xxx.xxx.xxx.xx has attempted to open an LSA policy handle on this machine. The attempt was rejected with STATUS_ACCESS_DENIED to prevent leaking security sensitive information to the anonymous caller.
The application that made this attempt needs to be fixed. Please contact the application vendor. As a temporary workaround, this security measure can be disabled by setting the \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Lsa\TurnOffAnonymousBlock DWORD value to 1.
This message will be logged at most once a day."
I intentionally masked the IP address on this post. Each time the event is reported, the IP i... Read more

Answer:Question about "Error" found on Event Viewer

Hello and welcome to TheWindowsClub forum
It seems your computer is under attack.
You should prevent access to TCP 445 port by blocking it through Vista Firewall, or do use this temporary fix Security Research & Defense : Update on the SMB vulnerability situation
Please, tell me is your system up to date?

9 more replies
Relevance 96.76%

Hello, I guess this isn't a huge issue since its more of an annoyance than anything. I uninstalled Internet Explorer and configured my Indexing Options so it wouldn't include the location used for IE history (I thought?). But this error pops up from time to time in the Event Viewer. I have searched so many places for clues but came up with nothing so I turned here. Not sure of the easiest format to display the errors and settings so here is a compiled image of the Event Viewer and Indexing Options.

http://i50.tinypic.com/w7kdg5.jpg

Correct me if I'm wrong but I understand that the Gatherer can't find the file/location because it doesn't exist?

I tried searching the internet for "S-1-5-21-3684526760-1838744142-3877755193-1001" but no results came up. But after searching my computer I found a "S-1-5-21-3684526760-1838744142-3877755193-1001_UserData.bin" file in the C:\Windows\System32\wdi\{86432a0b-3c7d-4ddf-a89c-172faa90485d} directory. Not sure what this means although I'm not going to try deleting it.

Is this something that just happens if you uninstall Internet Explorer or could it have been caused when I used CCleaner and it was still set to remove IE data even though it was uninstalled.

Again, this isn't a critical thing so if no solution can be found no worries. Just thought I'd ask, thanks!

Answer:Event Viewer Search Error "iehistory://"

Hello !!

Since Internet Explorer's rendering engine is also used throughout Windows and with third-party applications as an embeddable component, it won't completely uninstall—only the executable is actually removed. So even if you move Internet Explorer the traces would be still there.

Hope this helps,
Captain

2 more replies
Relevance 96.76%

I've been investigating an "applications" eventlog error occurring since upgrading to XP SP2 and would appreciate anyone else with SP2 checking to see if they are experiencing the same error.

Instructions:

1 > go to Start > Run, enter eventvwr.msc and open the "Applications" log.

Do you see the following type error repeatedly:

Event Type: Warning
Event Source: Userenv
Event Category: None
Event ID: 1517
Date: 2/23/2005
Time: 11:08:50 PM
User: NT AUTHORITY\SYSTEM
Click to expand...

If so, go here and install the "User Profile Hive Cleanup Service"

http://www.microsoft.com/downloads/...6d-8912-4e18-b570-42470e2f3582&displaylang=en

2 >> after installing and rebooting a couple of times, go back to the Applications log and look for:

Event Type: Information
Event Source: UPHClean
Event Category: None
Event ID: 1201
Date: 3/13/2005
Time: 12:57:33 PM
User: *****
Computer: *****
Description:
The following handles in user **** have been closed because they were preventing the profile from unloading successfully:

svchost.exe (724)
HKCU (0x200)Click to expand...

Do you see that issue occuring with "svchost.exe" Your PID for svchost.exe will vary (mine was 724, but this can vary as well)
Let me know I'd like to ask you to try something else. On my system this PID of svchost.exe ran two services "termservices" and "dcomlaunch" -- they are somewhat related.

It appears that temporarily dis... Read more

Answer:XP SP2 "Reality Check" 4Me: Userenv Event ID: 1517

16 more replies
Relevance 96.76%

I'm getting this message when I right-click on a day in Calendar version 8.0 and select "New event":      "You don?t have permission to modify this event."     "The owner of this calendar doesn't allow you to create these items."(please see attached Screen Shot 2015-04-29 at 9.35.06 PM   Wednesday  4-29-15.png)What to do?HALP !!!

Answer:Yosemite Calendar v8: "You donít have permission to modify this event."

Are you the one who entered the event?Can you enter a new event?I see you also posted this on another forum.Almost a year ago? No solution?The workaround is to stop using it and get another Calendar application.Best Calendar Apps and Utilities for MacThat's all I can tell you. 

1 more replies
Relevance 96.76%

Shown below is the Windows 7 event log, and I would like to know what the error means, and if I should be concerned? My guess would be that this is affecting performance or perhaps just a symptom of other problems? The system isn't overloaded with garbage or viruses or system-tray apps or anything like that. Even if someone could give me a starting point, that would be much appreciated!

Pretty much every item in the list says the same thing with some different numbers. Let me know if that information can help you, and I'll post it.
 

Answer:Solved: Event Log: Windows has started up: "false"

This article suggests it's not a big deal, but it couldn't hurt to review your drivers.
http://social.answers.microsoft.com...e/thread/0bef777e-a5ab-4b8a-bca1-4df814c01bd9
Are there any other symptoms?
 

2 more replies
Relevance 96.76%

Hi,

I've recently noticed two entries at the top of the Task Manager which have blank "user name" and "description" fields. The first entry is about 1,300K, and the other is 660K.

When I right click on either, I can select "Perform Administrative Task". If I choose to do so, the blank entries disappear, and the "show processes from all users" box is checked.

I wonder if this is a security issue that Spybot, Windows Defender and AVG Free haven't picked up.

Any advice is greatly appreciated! Thanks!
 

More replies
Relevance 96.35%

Greetings,

I checked one of my email accounts and found a message from myself, titled "COOL" with the following in the body:

"Hi guys,
I found a webpage,the items and the price are very good,I hope you also can access it and choose some items that you need.They supply all kinds of laptops,digital cameras,GPS&#65292;cellphones,game console and many other electronic products.If you buy more,you can get more discounts.
The website is: www.zyamaha.cc
Email: [email protected]
v"

This from an email account I rarely use to send messages from. I went to that email address and found "I" had sent numerous others in my address book the same message. Oddly enough I have 4 "Delivery Status Notification (Failure)&#8207;" messages but only two show up in sent messages folder. At the same time some but not all of my other email accounts have received the message, again none of these appear in the sent messages folder of the offending email account.

Here's the hijackthis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:45:16 PM, on 2/14/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLab... Read more

More replies
Relevance 96.35%

IPcop current version.

Is there any solution for this problem? I am trying to install on a 20GB ide drive and getting the "unable to make log file system" error.

I am trying to install it in a REX PC http://www.linuxshoppen.dk/pdf/produkter/lex_cv860a.pdf
 

More replies
Relevance 96.35%

So, I was reinstalling Vista, from a folder on my PC. The folder is on Z:\, and I'm installing to C:\. I installed previously from XP to Vista the same way. This time, I got a disk read error on reboot. chkdsk found a problem, I used /r and let it work. Still got the error. Booted to my Ubuntu drive and opened GParted, where it shows a warning saying it's unable to detect file system, etc.

I'd just like to get some of my files off my C:\ drive, but I am unable to see it from Computer, though I can see the other partition on the same drive. Any tips?

More replies
Relevance 95.94%

After upgrading to Windows 8.1, I keep getting Event id 257, Defrag: "The volume TI10664900J (C:) was not optimized because an error was encountered: The parameter is incorrect. (0x80070057)" in Event Viewer errors.




-

System














-

Provider











[
Name]
Microsoft-Windows-Defrag


















-

EventID
257











[
Qualifiers]
32768




















Level
2



















Task
0



















Keywords
0x80000000000000

















-

TimeCreated











[
SystemTime]
2013-11-12T16:21:45.000000000Z




















EventRecordID
22496



















Channel
Application



















Computer


















Security












-

EventData











TI10664900J
(C:)










The parameter is
incorrect. (0x80070057)










00000000A40500005105000000000000629468641336AAB85B55B1B5B038000000000000





Any help would be appreciated.

Answer:More 8.1 problems: Event id 257, Defrag: "The volume TI10664900J (C:) was not optimized because an error was encountered: The parameter is incorrect. (0x80070057)"

Hi,
This issue could be caused if Defragment take operation on SSD. And as we know SSD cannot be defragged.

To check if your SSD has been defragmented, please run following powershell command:

Get-EventLog -LogName Application -Source "microsoft-windows-defrag" | sort timegenerated -desc | fl timegenerated, message
Judging by the drive letter, you can easily see if your SSD drive gets defragmented. The SSD volume below has been correctly re-trimmed first, but then erroneously defragged.
You can try following steps to avoid defragmentation of your SSD:
Exclude SSD from automatic maintenance
Open the disk optimizer (dfrgui):

      
Press "Change Settings".      
Press "Choose" and remove checkboxes from SSD volumes.
In addition, I will document it and confirm with product team if it is by design.
Keep post.Kate Li
TechNet Community Support

7 more replies
Relevance 95.94%

My Windows 10 was installed on top of Windows 7 and, since then, I have been trying to correct the many little glitches I've run across. Not always successful. This view of my Administrative Events is typical and not normal - but I don't know where to go from here.

Answer:Attached file "Administrative Events" shows many problems

Hi,
1. Event ID 153- might indicate a failing disk.

Start by downloading and running Crystal Diskinfo (free) - gives a quick report + SMART params.

Recommend you organise the report by clicking on the tabs to find the most frequently occurring Error Event id's and look them up.

2. Event id 3104
Event 3104 Errors Since Anniversary Upgrade

3. Tools
You may find this free tool helpful
or this (Event log explorer)

12 more replies
Relevance 95.94%

i have several days having this problem with internet explorer 11, i have a windows 10 professional operating system, core i5,8gb of Ram.
in my country the only browser that works on the government websites is internet explorer, the other browsers have several problems to complete transactions.
also the only thing i need is java to work with that websites.
this is the screen that i have from event viewer. 

i hope that you can help me with this error.

 

More replies
Relevance 95.94%

I am using windows 7 x64 RC, My event viewer is filled with "Known folders" errors like this:Error 0x80070005 occurred while creating known folder {3eb685db-65f9-4cf6-a03a-e3ef65729f3d} with path 'C:\Windows\system32\config\systemprofile\AppData\Roaming'.Any ideas? Never seen this before.This is my second time installing windows 7 Rc. I installed it yesterday, then mysteriously got a BSOD 0x0000007E (no error msg) today.

Answer: "Known folders" errors in event viewer

The 0x07E error is usually the controller. Folder access problems also indicate some disk corruption problem.Rating posts helps other users
Mark L. Ferguson MS-MVP

64 more replies
Relevance 95.94%

I'm running WinNT 4.0 Server (SP5).
I noticed in the Event Viewer the message "The device \Device\Harddisk1\Partition1 has a bad block". The Event ID is 7 and the source is Disk.
I understand that part of the hard drive may be unuseable (I couldn't find much documentation on this error), although the server seems to be functioning fine (so far...).
What should I do, troubleshooting wise, as a result of this error? Also, any specific information on Bad Block errors would be greatly appreciated!

------------------
Howard Feldsott
 

Answer:"BAD BLOCK" error in Event Viewer - NT4

Well, for the NT part, you should really be in the NT forum.

Since you have a hardware question though, lets answer that first.

What brand hard drive is it? Most companies have utilities that you can run on the drive to test it.

------------------
Get free stuff and help out a poor computer tech

7/9 added two pay to listen to music sites

I've gotten 5 $18 amazon.com GCs in 4 weeks listening to music! http://www.rkfdcore.com/ebaypics/referrals.htm
 

3 more replies
Relevance 95.94%

Hello...
I have a Dell Optiplex GS270 that is giving me a "shutdown due to a thermal event" error and then will not boot before shutting down. The first thing I tried was a thorough cleaning with canned air and a damp sponge (where applicable).
No luck... just a repeat of above.
Next I checked the posts here and tried
"Start the system.
Press 'F2' to enter System Setup.
Under the Maintenance heading, highlight 'System Event Log' and press the 'Enter' key.
Highlight 'Clear System Event Log' and press the 'Enter' key.
Press the 'Esc' key twice to restart."
Again... a repeat of problem.
Is my next recourse to replace the heatsink/fan or.....
Hate to buy parts I may not need.
Thanks for any help offered!
Jan
 

Answer:Dell PC with "Thermal Event" problems... PLEASE help!

By all means remove the heatsink and fan, clean them and re-attach with a little fresh thermal compound. Thernal paste can dry out and crack. It is then worse than none at all.
 

1 more replies