Computer Support Forum

UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Question: UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Slow booting. Really slow booting. Seems that using an SD card for ReadyBoot/ReadyBoost is causing the issue. But why?
On investigation, this only started happening back in November, which coincides with the install of KB2685813 UMDF 1.11 (http://support.microsoft.com/kb/2685813).
Could be a bit buggy....


I'll uninstall the update and see if this solves the issue.
So, first event:

Log Name: System
Source: Microsoft-Windows-DriverFrameworks-UserMode
Date: 04/01/2013 10:47:30
Event ID: 10114
Task Category: Startup of the UMDF reflector
Level: Information
Keywords: (2)
User: SYSTEM
Computer: LAPTOPW7A
Description:
The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">" target="_blank" class="invilink">http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
<EventID>10114</EventID>
<Version>1</Version>
<Level>4</Level>
<Task>101</Task>
<Opcode>0</Opcode>
<Keywords>0x2000000000000002</Keywords>
<TimeCreated SystemTime="2013-01-04T10:47:30.613800000Z" />
<EventRecordID>131964</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="68" />
<Channel>System</Channel>
<Computer>LAPTOPW7A</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<UMDFReflectorDependencyMissing xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/DriverFrameworks/UserMode/Event">
<Dependency>WUDFPf</Dependency>
</UMDFReflectorDependencyMissing>
</UserData>
</Event>

and Second event:
Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 04/01/2013 10:47:30
Event ID: 219
Task Category: (212)
Level: Warning
Keywords:
User: SYSTEM
Computer: LAPTOPW7A
Description:
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&1&STORAGE#VOLUME#_??_SD#VID_27&OID_5048&PID_SD16G&REV_3.0#5&1720BB1&2&0#.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-01-04T10:47:30.613800000Z" />
<EventRecordID>131965</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="68" />
<Channel>System</Channel>
<Computer>LAPTOPW7A</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="DriverNameLength">101</Data>
<Data Name="DriverName">WpdBusEnumRoot\UMB\2&amp;37c186b&amp;1&amp;STORAGE#VOLUME#_??_SD#VID_27&amp;OID_5048&amp;PID_SD16G&amp;REV_3.0#5&amp;1720BB1&amp;2&amp;0#</Data>
<Data Name="Status">3221226341</Data>
<Data Name="FailureNameLength">14</Data>
<Data Name="FailureName">\Driver\WUDFRd</Data>
<Data Name="Version">0</Data>
</EventData>
</Event>

Relevance 100%
Preferred Solution: UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Hmm. Now that is interesting.
In my System event log I was getting an NTFS error (57: Failed to flush tlog). I didn't think it was from my HDD, so using diskpart, I ran a 'CLEAN ALL' on my SD card, then recreated the FS as exFAT (previously it was NTFS).
Seems to be working now, although I'm getting VDS Basic Provider errors (Unexpected failure. Error code:
[email protected]) "which can be safely ignored" (re: KB979391).
This begs the question: if it can be safely ignored, why is it raised in the first place?
Boot time is also restored to an acceptable timescale.

11 more replies
Relevance 103.24%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 98.6%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 87.87%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 87%

I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.

I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?

Answer:Kernel-PnP Event ID 219 Driver failed to load problem.

Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219

9 more replies
Relevance 81.49%

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

Answer:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

9 more replies
Relevance 79.46%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 78.3%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies
Relevance 78.3%

Briefly:
My old system hasn't been powered on for about a year. Problem was the onboard video failed (I think)

Recently replaced it with a video card from another system (riva TNT) and bought some memory (system wouldn't boot, determined that the memory was bad)

Now the system booted but win2K wouldn't work. No problem I have XP now...

After multiple error during the xp install I finally got through it...only the computer will only boot in safe mode..

Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow ??? in device manager

Still will not boot normally

Checked event log got the following error:
Event 7026: The following boot-start or system-start drivers failed to load:

Amdk7
fips

Searched the net found a M$ support about it

http://support.microsoft.com/?kbid=306458

couldn't find amdk7.sys but managed to update the driver over the net, now its there...yet I get the same error

I did the regedit described but no folder called "parameters"

Made one....didn't work....deleted the value
added the key to my available folder....didn't work

I'm at wits end....I've been working on this (off and on) for a month

Can anyone help with this one?????
 

Answer:Event 7026: The following boot-start or system-start drivers failed to load: Amdk7

12 more replies
Relevance 78.01%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

More replies
Relevance 104.96%

Many people have posted about Event 2 - Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035.  I have not seen any posts where someone from Microsoft explained why this event occurs, why it occurs
in groups of 20 in about 10 seconds, how to prevent it, or whether it is something to be lived with.
Can anyone, especially someone from the NTdebugging team, a/k/a Global Escalation Services (GES), address this?
Thanks.

More replies
Relevance 103.32%

My laptop isn't working properly. I found these two critical errors in the event viewer. Also many errors.  Every now and then Dell techs call me and tell me I have trouble with some drivers. But I never let anyone on my computer who calls me. But one
day I did and when I told him I couldn't buy the service they offered we were disconnected. I quickly ran my antivirus and found a Trojan. They called me back a few days later and I told them they are frauds. The number is from Dell but in India. But I was
having some trouble before that.
- System
  - Provider

  
[ Name]  Microsoft-Windows-DriverFrameworks-UserMode
  
[ Guid]  {2E35AAEB-857F-4BEB-A418-2E6C0E54D988}

  
EventID 10110

  
Version 1

  
Level 1

  
Task 64

  
Opcode 0

  
Keywords 0x2000000000000000

  - TimeCreated

  
[ SystemTime]  2016-07-11T04:23:10.728536500Z

  
EventRecordID 92225

  
Correlation

  - Execution

  
[ ProcessID]  1080
  
[ ThreadID]  4116

  
Channel System

  
Computer BlueDell

  - Security

  
[ UserID]  S-1-5-18

- UserData
  - UMDFHostProblem

  
[ lifetime]  {3DE7B1BE-968F-4F1A-B823-7D75D1A61705}
  - Problem

  
[ code]  3
&nbs... Read more

More replies
Relevance 103.32%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Relevance 102.5%

Welcome,
I have a problem. Every day I have this error in event viewer, system log:
{Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\S-1-5-21-4089430802-3287748835-2730757419-1001-0-ntuser.dat was corrupted and it has been recovered. Some data might have been lost.
This error repeats every day at about 3:00AM.
Maybe someone could help me? Thanks in advance.

Answer:Event ID 5 Kernel-General error in Event Viewer

Hi:

Just curious:
Are you running MBAM Premium (paid version), or Free?If it's Premium, what time does your scheduled daily Threat scan run? (Assuming you are running a daily Threat scan, which is the default scan schedule.) (Dashboard > Settings > Automated Scheduling > Threat Scan > Edit)

Thanks,

MM

7 more replies
Relevance 100.86%

Hello.
I recently have had problems with my windows 8.1 laptop and it was blue screening with the code: DRIVER_POWER_STATE_FAILURE and then I said what a lot of the guides said to disable the quick
shutdown in power options and I am not sure if it worked because I still didn't do anything about the Driver Frameworks-UserMode critical problems that I saw in event viewer so please can you tell me what to do? thanks.
(P.S I have a USB mouse but I saw that nothing is wrong in the driver manager with its drivers).

More replies
Relevance 100.45%

The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance.

Just browsing through my Event Viewer trying to knock out and solve any random errors when THAT pops up a few times a day. Could anyone give a clue as to what it means? Hardware or software issue?

Answer:Event ID Error Event 137, Kernel-Power

Well (S4) is hibernation.

You could run a test by shortening your hibernation setting, make sleep after 15 and hibernate after 30, then stop using it and note wall clock time. Calculate when it will drop into hibernation. Wake it up fifteen minutes after it should have hibernated and see if the event coincides with the machine changing from S3 to S4.

To confirm your machine supports all the necessary sleep states at command prompt(admin) type

powercfg -a

10 more replies
Relevance 100.45%

Please advise what this error might be I've started getting several times a day:

Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 21/11/2015 14:14:07
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer:
Description:
Session "" failed to start with the following error: 0xC0000011
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2015-11-21T14:14:07.333968800Z" />
<EventRecordID>5752</EventRecordID>
<Correlation />
<Execution ProcessID="6760" ThreadID="5300" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Swale</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data ... Read more

Answer:What is Error Event 2 Kernel- Event Tracing?

Any ideas what this maybe due to?

3 more replies
Relevance 99.63%

when I try to invoke the event viewer I get the following error:MMC could not create the snap-in.Name: Event ViewerCLSID: FX:{b05566ad-fe9c-7a4cbb7cb510}This is a new installation of Windows Vista Ultimate from MSDN (RTM).Any ideas how to fix this? how to re-register the snap-in?thanks

david

Answer:MMC fails to load event viewer in RTM

After typing this I found a mmc.exe.config file that was forcing the version of .net.   Renaming the file fixed my problem.
You rock!  I spent a long time trying to figure this one out.  An application (Peachtree accounting) installed the .net 1.1 framework and hosed many of my MMC snap in's including event viewer, task scheduler and IIS 7 admin.
I looked in my system32 folder and sure enough there was an mmc.exe.config file that had the supported runtime section set to "v1.1.4322".  I couldn't seem to edit the file to comment out that section, vista wouldn't let me save it, but it did let me rename it to mmc.exe.config.BAK and sure enough everything started working again.  I'm guessing these problems with mmc and snap in's in Vista are all related to apps that install the .net 1.1 framework and windows vista's inability to protect that mmc.exe.config file.
 
Cheers to you!

54 more replies
Relevance 97.17%

I received a windows network error and went into events log and it has a warning on it. How do I resolve? do I need to assign a task to it or somehow delete. There are several events with warning from source Microsoft windows kernel processor power. Please
help.

More replies
Relevance 96.76%

Umm, today I've been solving all kinds of event errors but this one remained unsolved mostly because I can't find any info about it.

It shows in event viewer log on every boot / win restart. I don't know what it is and how does it affects me. I would be grateful if someone can give more info or potential fix.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />

<EventID>2</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>2</Task>

<Opcode>12</Opcode>

<Keywords>0x8000000000000010</Keywords>

<TimeCreated SystemTime="2017-05-13T23:52:58.448595000Z" />

<EventRecordID>480</EventRecordID>

<Correlation />

<Execution ProcessID="2384" ThreadID="2208" />

<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>

Answer:Event ID 2: Kernel event tracing

Bump

1 more replies
Relevance 96.76%

I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5

Answer:event 3, kernel-event tracing

  
Quote: Originally Posted by pruw


I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5



Is win 7 installed already?
Do you have a backup from before the problem started?
Do you have a working win 7 dvd to do a repair install?

There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.
... Read more

1 more replies
Relevance 96.76%

Hi,

For the past 3 nights between 2100 and 2200 Event Viewer has been recording a string of approximately 150 'Kernel Event Tracing'events. The system works ok, but as I sit and watch, the event viewer racks up about 1 every 5 seconds. I have attached a screen shot.

The PC is about 5 years old, but this install of Windows 7 SP1 was done about 1 month ago along with the addition of a Samsung SSD.
My searches have not found any suggested solutions other than system restore or download a 'Registry Fix' which doesn't appeal to me at all.

Any help would be appreciated.
Rob.

Answer:Kernel Event Tracing Event ID 2

Hi try this. Rename this file: %windir%\panther\setup.etl to setup.old and reboot.

18 more replies
Relevance 96.76%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:Driver failure WudfRd event 219 help please ?

Issue solved

5 more replies
Relevance 96.76%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal I have also attached my computers information from the dm logged collector as well.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:random crashes WudfRd event 219 help please ?

Hi animeowns,

Welcome to the 10forums.

The 5v is 10.200. What are the values of the 3.3v and 12v?

The nvidia video drivers have been flagged, unknown from what GPU as you have 2 titan x GPU's.
This could well be due to the power issue.

Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

6 more replies
Relevance 96.76%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:Driver failure WudfRd event 219 help please ?

Issue solved

1 more replies
Relevance 96.76%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal I have also attached my computers information from the dm logged collector as well.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:random crashes WudfRd event 219 help please ?

Hi animeowns,

Welcome to the 10forums.

The 5v is 10.200. What are the values of the 3.3v and 12v?

The nvidia video drivers have been flagged, unknown from what GPU as you have 2 titan x GPU's.
This could well be due to the power issue.

Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

6 more replies
Relevance 95.94%

When trying to view the system log I get an error unable to complete the operation on 'system'. The interface is unknown. I think this is because the Event log Service is not running.

When I try to start it it fails with an Error 31 - a device attached to the system is not working.

I've been to several threads on the internet but none of the advice has helped.

I'm not sure how long this PC has had this problem. It's not mine. I discovered this issue when trying to resolve another issue.
 

Answer:Event Log fails to start.

Could this be cause by a virus?
 

1 more replies
Relevance 95.53%

What is this and how can I resolve it? 

Thank you, 
Davis

More replies
Relevance 94.71%

Hello,

Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?

I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.

I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.

Anyone out there have any idea?

Here's the event info:

Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop

System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more

Answer:Event ID 7026: 'ksop' driver failed to load?

So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.

If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!

3 more replies
Relevance 93.48%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

Answer:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

3 more replies
Relevance 93.07%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

Answer:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

19 more replies
Relevance 92.66%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.
This event has never repeated after many reboots.
I have not seen any subsequent errors of any sort.

Does the absence of repetition indicate that Windows suceeded on the next reboot,
or that Windows has given up trying to mend a fatal wound ? ? ?

There were 4 off such error events within 1 second, designating these *.MOF files
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATIONFOUNDATION\SERVICEMODEL.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF

I later found that starting a few seconds before that, and finishing a few seconds after,
there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.
Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-
4 original *.MOF files that retained timestamps of last year and before
7 original *.MOF files that were halved in size as they were modified
44 brand new *.MOF files I have not seen before.

Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?
Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?
Does the continued presence of all these *.MOF file... Read more

Answer:SINGLE WinMgmt event 4 :- "Failed to load MOF ... while recovering repository file."

First, some data on .mof files, http://technet.microsoft.com/en-us/library/cc180827.aspx AND http://filext.com/file-extension/MOF.Now that you made me check this system ...I have 121 files with the .mof extension. About 70% of them seem to be in C:\Windows\System32\wbem\AutoRecover, 25% in C:\Windows\System32\wbem..a few in service pack folders, MS.NET, etc.From what I see, it's too technical for me to worry about. If it was something to worry about, I suppose that Event Viewer would give me an error message about it or I would get a BSOD, etc.I don't spend a lot of time worrying about WMI processes...they don't exist for me, they exist for XP (at least, that's my interpretation).Louis

2 more replies
Relevance 92.25%

"Performance power management features on processor 3 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."

I've had 180 of these since February! I've tried tonnes of malware cleaning / fixing, driver updates, and sfc fixes, but still getting these usually when gaming.

I've attached a zip of SF Diags folder.

Please help!

Answer:Event ID 35 resulting in hard lock of system

Don't be concerned about errors in the Event Viewer unless you are having problems (I said this without looking at the reports that you've uploaded).
This error in particular is saying that you may need a BIOS/UEFI update.
Once that's been updated to the latest version - don't worry about it anymore (again, unless you're having problems).

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

You have a Realtek RTL8188SU Wireless LAN 802.11n USB 2.0 Network Adapter:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



These devices have problems in Device Manager:





Microsoft Network Adapter Multiplexor Default Miniport ROOT\NET\0000 This device is disabled.
Microsoft Hyper-V Network Switch Default Miniport ROOT\VMS_MP\0000 This d... Read more

4 more replies
Relevance 91.84%

The BCM42RLY service failed to start due to the following error:
The system cannot find the file specified.

The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&2.
PMEM is new.... other two been around a while.

The PMEM service failed to start due to the following error:
This driver has been blocked from loading

\??\C:\Windows\SysWOW64\drivers\pmemnt.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.

Only negative aspect so far has been Windows backup wont run with an error message:

"The service can not be started, either because it us disabled or because it has no enabled devices associated with it (0x80070422).

Checked the path on PMEM...looks right .....

Found at:

C:\Windows\SysWOW64\drivers\pmemnt.sys
C:\Windows\System32\drivers\pmemnt.sys

The BCM42RLY is related to wireless which I tried installing / reinstalling and it took me almost a week ti get wireless working again. I believe it's related to the WUD one and that the other two are obviously also relatred to each other.

Will keep yahoo'ing but if any one else has seen before, wud appreciate a pointer.

Answer:System Stable ... Nagging Event Viewer Mssgs (BCM42RLY/PMEM/WUDFRd)

Do you still need assistance with this issue?

9 more replies
Relevance 90.61%

Windows 7 64-bit SP15

My Dell Latitude e6420 is having problems as of the past week. An error comes up on every reboot or startup of my machine. The "Failed to Start System Event Notification Service" error would come up on my screen down in the taskbar. Details below of startup:Laptop comes up slow.
Login and once desktop shows that error appears on my screen and sometimes my audio service isn't working (but it can't be the the driver for my video/audio card because sometimes it works and other things will crash meaning a corruption of some system driver.)
Takes 5-10 minutes for machine to fully boot.
Look at event log and shows Event ID Error 7026 every reboot.
I cannot find a fix for this error and nothing seems to be working. Please help with any information. Thanks.

Answer:Failed to Start System Event Notification Service

Windows Server 2008: Event ID 7026 this article just says what you are thinking seems to be correct. have you looked in device manager to see if there are any warning signs in there?
when your in event viewer, isn't there a link with the error that gives some help?

1 more replies
Relevance 90.61%

Hello there I am new here but I have this event viewer ERROR.

The IOMap service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000

My PC SPECS:

MB: Asus P9X99 Deluxe II
CPU: Intel I7 6950X
GPU: Titan X Pascal
PSU: Corsair 1200i
RAM: Corsair DDR 4 128GB

OS: Windows 10 PRO 64bit

I do not even know if you need these PC specs to solve this problem but I am giving them anyways.

I also use a switch and a synology NAS. I think that is about it.

I would be very very greatfull if anyone could help me to solve this error. I am not very advanced in these things so if you could be very specific that would be great.

Answer:EVENT ID 7000 The IOMap service failed to start

Welcome to the TenForums @Romas

Could you post the message you get. The important element is the file name and location that Windows is using.

When the meassge appears use ALt + Prt Screen to capture. Paste into Paint, save and post.

If you could do the same with the info related to this even t in Event Viewer.
Ken

26 more replies
Relevance 90.2%

hi guys,
well i was installing an automatic update for windows overnight, then came back, my computer had restarted and the update hadnt been completed.
anyway when i tried to complete the update it kept stopping saying it couldnt be completed.
so that was that, but then my comptuer started going nuts.
i uninstalled XP service pack 2 to try and sort it out (ive had some problems since getting SP2), so it uninstalled it fine, and restarted in safe mode.

now i have a problem when im rebooting and logging onto desktop, im getting the desktop display picture(background picture), and then no explorer load up.
i try and run explorer.exe and i get the message:
'could not load event logger'

im also getting the repeated message 'windows has finished installing the software for your new devices, you must restart for the ..blah blah'.
when i uninstalled SP2 and it restarted in safe mode it went through announcing all my 'newly installed' hardware devices like ati card, modem, disk drives etc...
anyway so now i cant load windows and i want to back up some stuff and maybe just reformat or reinstall windows.

please help me out. and DAMN SERVICE PACK 2!!
lol.
thanks.
 

Answer:'Could Not load event logger' XP start up problem

ill add that i cannot access safe mode either because it loads up,then gives me the option of continue to safe mode or choose the recovery option, i click continue to safe mode and it just sits there.
then if i press alt cntrl delete it does the same 'event logger' message.

realy weird.
i just want to back up a few things then reinstall windows but i cant even get into safe mode
 

2 more replies
Relevance 88.56%

OK Now this is getting very annoying. Apparently this problem has been going on for a long time (Since 05/23/05) but so infrequently that I haven't realized it. And no, I don't remember what I might have down then to start this problem.

Now I'm getting the BSOD at least once a day. The last time I wrote down the text and it listed the following "DRIVER_IRQL_NOT_LESS_OR_EQUAL

When I look into the event view the error lists the source as the Service Control Manager. The detailed description states:

"The USB SECURITY DEVICE service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. "

I have no idea what might have started this but I do know that it suddenly got much worse after I replaced my power supply. (The Fan Died and I shut down gracefully as soon as I got the first wiff or burnt electronics.) All has worked fine since then except for the increased Frequency of this BSOD.

I'll add my full system specs as soon as I get them from the everest pgm I just downloaded.
 

Answer:BSOD-Event Vwr points to SCM & USB SECURITY DEVICE service failed to start

Hi GScooter,

I've investigate your minidumps and it is faulty ram. You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty can pass memtest.

Suggestion
1. Reseat the memory stick to another memory slot
2. Downclock the ram
3. Clean the inside the computer case
4. Make sure that the ram is compatible to the motherboard
If it still crashes, diagnostic which memory stick is faulty
1. Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
2. If you have only one memory stick, replace the ram
 

1 more replies
Relevance 88.56%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 88.56%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 86.51%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 86.51%

I have hundreds of these errors for event id's 1026,1049 and 1059, I have searched and cannot find anything remotely associated with these errors or the cause of them:

The description for Event ID 1026 from source Internet Explorer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
 
If the event originated on another computer, the display information had to be saved with the event.
 
There all have the same information and event log online help does not "help" , any ideas?

Answer:Event ID 1026 ,Event ID 1049 and Event ID 1059

I think Iv'e answered my own question:
 
http://msdn.microsoft.com/en-us/library/dd565636(v=vs.85).aspx error 1059
http://msdn.microsoft.com/en-us/library/dd565650(v=vs.85).aspx error 1049
http://msdn.microsoft.com/en-us/library/dd565667(v=vs.85).aspx error 102
Would someone be able to check this is correct?
 
thanks very much

3 more replies
Relevance 86.51%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Answer:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

1 more replies
Relevance 85.28%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping t... Read more

Answer:Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 83.23%
Question: Kernel Event 41

Hello,

Ever since I have upgraded to Windows 10 I have been getting this Kernel Event 41 issue where my computer abruptly shuts down, no BSOD. As far as I know, this issue only occurs during high loads in CPU/ GPU demanding games.

This issue occurs in the following games:

- Star Citizen
- Planetside 2
- ArmA 3
My temperatures are stable during gaming and never goes above 62 Degrees. Therefore can someone here please identify what is the cause of the problem and what can I do to permanently stop this incredibly frustrating issue from occurring again.

Specs:

Intel Core i5 4690K (not - overclocked)
Corsair Vengeance 4 x 4GB (16 GB total) RAM
Corsair CX 750M PSU
Asus Maximus VII Hero Motherboard
Corsair H100i cooler
Corsair 450D case
Seagate Barracuda 2 TB HDD
Crucial MX100 256 GB SDD (OS is installed here)
Gigabyte Windforce GeForce GTX 970 4GB
Asus DVD RW Optical Disk Drive
Asus PCE AC68 Wireless Adapter

More replies
Relevance 83.23%
Question: Kernel event 41

Starting a week ago, my PC began crashing due to a Kernel_Data_Inpage_Error.

This occurs at seemingly random times (i.e. not when it wakes up from sleep, etc.) and try as I might, I have not been able to successfully troubleshoot the issue.

I attached the data retrieved from the SF Diagnostic Tool. Please let me know if you need any additional information.

I greatly appreciate any help!

Answer:Kernel event 41

The reports aren't complete. Please rerun the data collection app and let it run for at least 15 minutes (or until the app itself says that it's done).
Then zip it up and upload it with your next post.

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.





Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NETwNe64.sys Tue Dec 6 12:48:39 2011 (4EDE5577)
Intel? Wireless WiFi Link Adapter driver
http://www.carrona.org/drivers/driver.php?id=NETwNe64.sys

STOP 0x7A errors ( BSOD Index ) are mostly hardware. If stopping the overclock doesn't fix it, then please run these free hardware diagnostics: Hardware Diagnostics Let us know the results and we can move on from there.

Analysis:
The following is for informational purposes only.

Code:
**************************Sat Sep 14 17:27:43.704 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091413-35000-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win... Read more

13 more replies
Relevance 83.23%

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.

Answer:Event 441, Kernel-PnP

xbatman139 said:

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.



I have the same problem with my new headset. There is no way to get it activated with new headset.
Hope for help!

9 more replies
Relevance 83.23%
Question: Kernel event

Greetings,
I have Windows 8 64 bit installed on a new Hp h8 1360t . On each restart I get this error.
"PKU2u log failed to start with the following error: 0xc0000035".
The results of my searches to resolve this error has been minimal to say the least.
I have run sfc/scannow and a chkdsk /r with no positive results.
If anyone can give light to this error and how to correct it would be greatly appreciated.
Thank you,
Richm

Answer:Kernel event

Please read this post. Would be the same for Windows 8
Kernel Event Tracing error: 0XC0000035 - Windows 7 Help Forums

5 more replies
Relevance 83.23%

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.

Answer:Event 441, Kernel-PnP

Originally Posted by xbatman139


Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.



I have the same problem with my new headset. There is no way to get it activated with new headset.
Hope for help!

10 more replies
Relevance 83.23%
Question: Kernel Event 41

Hello,

Ever since I have upgraded to Windows 10 I have been getting this Kernel Event 41 issue where my computer abruptly shuts down, no BSOD. As far as I know, this issue only occurs during high loads in CPU/ GPU demanding games.

This issue occurs in the following games:

- Star Citizen
- Planetside 2
- ArmA 3
My temperatures are stable during gaming and never goes above 62 Degrees. Therefore can someone here please identify what is the cause of the problem and what can I do to permanently stop this incredibly frustrating issue from occurring again.

Specs:

Intel Core i5 4690K (not - overclocked)
Corsair Vengeance 4 x 4GB (16 GB total) RAM
Corsair CX 750M PSU
Asus Maximus VII Hero Motherboard
Corsair H100i cooler
Corsair 450D case
Seagate Barracuda 2 TB HDD
Crucial MX100 256 GB SDD (OS is installed here)
Gigabyte Windforce GeForce GTX 970 4GB
Asus DVD RW Optical Disk Drive
Asus PCE AC68 Wireless Adapter

More replies
Relevance 83.23%

Not sure when this started but I wanted to check out a problem on this system and when I went to do some filtering on the event logs the Event Sources section was empty. I can filter by event level, I can filter by Event IDs but if I try any of the drop
downs, Event sources or Keywords the lists are blank.

Any suggestions?
Peter

More replies
Relevance 82.41%

I don't experience any problems with my PC, but in event viewer I got on every startup 2 warnings, they are almost identical just one number is making them different from each other. All drivers are installed properly and they are working fine, I have no idea why are those two warnings keep poping up, can someone tell me how to fix this or something, thanks.

Answer:Warning Kernel-PnP Event ID 219

Anyone knows maybe ?

Another thing I found interesting is that both of those warnings are from my 2 hard drives that are connected to Asmedia SATA controller, I installed 3.2.1.0 latest drivers for Asmedia SATA controller.

13 more replies
Relevance 82.41%

Hello,

My PC randomly and abruptly restarts, giving me a Kernel Power Event 41.
It has been happening almost as long as I've had the PC.
I could be browsing the web or playing a game, when the screen turns black and after about 3 seconds, the motherboard screen appears.

Although I have unticked "Automatically Restart", it still does the same thing.

Something to note is that at a time very close to the Kernel Power Event 41 is an Event ID 219_Windows Kernel PNP. When I was installing everything back when I built the PC, the NEC USB3 Driver failed to install properly.

Here is the Event Data for the Kernel Power Event 41:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2012-01-16T06:21:02.635223000Z" />
<EventRecordID>95918</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Vengance</Computer>
<Security UserID="S-1-5-18" />
</Syste... Read more

Answer:Kernel Power Event 41

Hi there,

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

9 more replies
Relevance 82.41%

Hi,

I Build this PC in April 2012, so its about 8 months old. It did run perfectly without any serious errors until now. Now i experience the system hanging, so i can't move the mouse anymore, and pushing the "Caps Lock" or the "Scroll Lock" on the Keyboard don't turn on the respective lights on it, so i guess it's a hard hang.

In the Event Viewer i see a "Event 41, Kernel-Power" critical event, and i had this event so far 10 times. The first time it happened at 12/5/2012, and there it has some bug-check parameters. All later events; 12/22/2012, 12/23/2012(twice that day), 12/25/2012(also twice), 12/26/2012, 12/27/2012, 12/29/2012, 12/30/2012; don't show any Bug-check parameters at all, only a zero value.

As far as i could investigate, it's probably a hardware error, but i not rule out that a software error could be the culprit. The only Hardware change this PC got apart from its building in April was a External Hard drive i bought towards end of November, a Western Digital My Book. But it's got it's own power source and it's not always running, so it can not be that my PSU is to weak.

I run the SF_Diagnostic_Tool with "grab all", and put the zip to this thread, so i save myself to list up what's in my PC . I hope someone can tell me, where to start with the repairs, those freezes annoy me. One more thing, it seems to mostly happen, when i am AFK and let the PC do something like download a big file, or big file movement (to and from... Read more

Answer:Event 41, Kernel-Power

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL (go to top of page)

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

Run this

Driver Verifier - Enable and Disable


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff800032e3194}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a ... Read more

9 more replies
Relevance 82.41%

Well... I give up. I built my own machine (The specs can be seen below) and no matter what I have tried... nothing has worked. Whenever I attempt to render a video, or play a heavy game (Borderlands, Skyrim, etc.) It will work for a while, then BAM, screen goes black a reboots out of nowhere! Spending 10 hours on a VERY serious video and not being able to render is making me furious. I am desperate for help and cannot find any solution. All the "Solutions" I've seen in other forums or other posts have not worked for me. I have done some serious looking, and here's what I have tried, that has failed.

1. Update all drivers
2. Disable 1 of 2 sound drivers
3. Make sure CPU is not overheating (I ran cinibench a few times to try and cause the crash to see if it was the cpu, and it ran just fine, but I may be missing something so this one really isn't "Confirmed")
4. Make sure GPU isn't overheating (GPU doesn't even get close to overheating)
5. Make sure any other essential component isn't overheating.
6. Disabled "Automatic Restart" for system failure.
7. Update realtek sound drivers... again...
8. Performing Windows Memory Diagnostic
9. Scream into a pillow
10. Curl up in fetal position in corner of room.
11. I attempted many different methods of troubleshooting I cannot remember at the moment... but just know... I have tried almost anything anybody has suggested and nothing... NOTHING has worked.

Now for my specs:

Processor: ... Read more

Answer:Kernel-Power Event Id 41

Please follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html

Also D/L Memtest+ burn it to a CD using a free program like Imgburn if you need one then boot from the CD to test the ram, let it run for at least 6 passes or until you see an error.
Memtest on a bootable CD is more conclusive then the Windows Memory test.

1 more replies
Relevance 82.41%

sometimes when i am on the internet my computer gets a blue screen and then reboots i run windows 7 here is wat i was able to find i got no idea how to read it could you please help me Ps when i do a memory diagnostic check it says there are problems contact ur manufacturer who recommend changing voltage setting and memory settings in bios . which i have never had to do can u please help - System

- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}



EventID 41


Version 2


Level 1


Task 63


Opcode 0


Keywords 0x8000000000000002

- TimeCreated
[ SystemTime] 2009-12-21T03:19:29.847600000Z



EventRecordID 398828


Correlation

- Execution
[ ProcessID] 4
[ ThreadID] 8



Channel System


Computer owner-PC

- Security
[ UserID] S-1-5-18

- EventData

BugcheckCode 0

BugcheckParameter1 0x0

BugcheckParameter2 0x0

BugcheckParameter3 0x0

BugcheckParameter4 0x0

SleepInProgress false

PowerButtonTimestamp 0

Answer:event 41 - kernel power

Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service - then post the link to it.
Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump

6 more replies
Relevance 82.41%

Sorry to add another problem to the pile of Event 41s,

Mobo: ASRock FM2A88X-ITX+
RAM: 16GB Team Vulcan (Also attempted with G.Skill Ripjaws, no change)
CPU: AMD A10-7870K Radeon R7 @ 3.9 GHz
GPU: AMD R9 280X @ 3GB (PowerColor)
PSU: Corsair 600W (Had 500W, believed issue to be related with power, replaced with 600W, no change.)
Storage: 120GB Sandisk SSD / 1TB HGST 2.5" @ 5400RPM

The issue seems to happen during video games (World of Warcraft, Fallout 4, and Heroes of the Storm). It has happened as well simply using Google Chrome and Skype.

I have ran every single malware/spyware/adware/antivirus program that I can get my hands on, no change. I have used several registry repair/optimization programs (trusted ones), no change.

I'm A+/Net+/ACMT certified, and I doubt it's anything hardware-wise. Temps are staying below scary levels and almost every part has been replaced with a KG I had laying around.

Thanks for everything in advance!

Answer:Kernel-Power (Event 41)

Please update following drivers
Driver Reference Table - vhidmini.sys
Driver Reference Table - L1C63x64.sys
Driver Reference Table - btfilter.sys

Have you used any hardware tests?

5 more replies
Relevance 82.41%

NTFS error is not showing up anymore, although the Kernel General one still appears. Anyone?

Answer:Event 5, Kernel General

Hard drive diagnostics: HD Diagnostic

8 more replies
Relevance 82.41%

I builded recently a new computer.

Motherboard Asus M4A87TD EVO
Processor AMD II Phennom X6 1090T Black Edition
RAM Kingston 1600 DDR 3 4 gigabyte
Videocard HIS5770
Powersupply Extreme power plus 500w cooler master

Almost every week my computer get 1 or 2 times a Event 41 Kernel Power critical problem

The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.


-System
-Provider[ Name] Microsoft-Windows-Kernel-Power[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID41Version2Level1Task63Opcode0Keywords0x8000000000000002-TimeCreated[ SystemTime] 2010-12-27T23:57:45.641615900Z
EventRecordID22434Correlation-Execution[ ProcessID] 4[ ThreadID] 8
ChannelSystemComputerBerechja-PC-Security[ UserID] S-1-5-18

-EventData
BugcheckCode0BugcheckParameter10x0BugcheckParameter20x0BugcheckParameter30x0BugcheckParameter40x0SleepInProgressfalsePowerButtonTimestamp0

I run already Memtest86 4.10 with totally no errors.
I also run already Hd tune 2.25 with totally no errors.
I searched with many different antispyware and antivirus for infections wich completely no treads.

Im complete stressed because i cant find any problem.
I did not overclock the computer at all... just original running at 3,20 GHZ

Answer:Event 41 Kernel Power

Hi -

The bugcheck and all parms = 0x0 - usually hardware related.

See if Driver Verifier finds anything - http://www.techsupportforum.com/f217...ed-473665.html

If system BSODs under Driver Verifier, provide full system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

3 more replies
Relevance 82.41%

Hi guys for the past few days sometimes my computer starts to freeze for a sec and i cant move my mouse around and it will restarts by it self.
when i go check my Events logs for my pc this comes up Kernel-Power Event id 41 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Also when i go check my Reliability Monitor in Windows 10 it says Windows was not properly shut down. does anyone know how to fix this problem? i wanst sure where to post this because it wasn't Blue screen it just freezes you cant move anything makes random sound like bluescreen and than restarts can anyone help me out thanks

More replies
Relevance 82.41%

Hello!

Here is my computer inventory and my problem below. Can anyone help? I get the error several times with the blue screen rebooting my computer.

Computer Inventory:


--------------------------------------------------------------------------------

The license associated with the Belarc Advisor product allows for free personal use only. Use on multiple computers in a corporate, educational, military or government installation is prohibited. See the license agreement for details. The information on this page was created locally on your computer by the Belarc Advisor. Your computer profile was not sent to a web server. Click here for more info.
--------------------------------------------------------------------------------
About Belarc

System Management Products

Your Privacy

In page Links:

USB Storage Use new

Hosted Virtual Machines new

Network Map

Software Licenses

Software Versions & Usage

Missing Hotfixes

Installed Hotfixes
System Security Status Security Benchmark Score
0.63 of 10 (details...)


Virus Protection
Up-to-date


Microsoft Security Updates
1 missing



--------------------------------------------------------------------------------

Computer Profile Summary
Computer Name: MikieRay-PC (in WORKGROUP)
Profile Date: Tuesday, July 26, 2011 5:23:15 PM
Advisor Version: 8.2a
Windows Logon: MikieRay
Plan for your next computer refresh...
click for Belarc's System Management products

Operating System new se... Read more

More replies
Relevance 82.41%

I built my own computer couple of weeks ago. At first, I was having BSOD which happens 1 time every 2-3 days. It was IRQL_NOT_EQUAL_OR_LESS. I did several different research and post my another thread about it. It seem to work now since I download the latest driver for video card then new problem appear which is Kernel-Power Event ID 41. It happens at random times even if I'm playing games, surfing website or computer idle. It looks like it's already shut down to black screen while my computer is running and my monitor is on. I put an attachment but there is no dmp.file since I followed all the instruction, maybe i fixed it few days ago which is a good thing but I need to find out how I can get rid of black screen that happen sometimes. I hope there's all information you need in the upload file. I'm looking forward to hear from you soon and I will check this often and hopefully get it solved tonight or so.

Answer:Kernel-Power Event ID 41

Does anyone know this kind of problem that can be fixed?

1 more replies
Relevance 82.41%

Hi guys for the past few days sometimes my computer starts to freeze for a sec and i cant move my mouse around and it will restarts by it self.
when i go check my Events logs for my pc this comes up Kernel-Power Event id 41 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Also when i go check my Reliability Monitor in Windows 10 it says Windows was not properly shut down. does anyone know how to fix this problem? i wanst sure where to post this because it wasn't Blue screen it just freezes you cant move anything makes random sound like bluescreen and than restarts can anyone help me out thanks

More replies
Relevance 82.41%

- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2013-03-12T03:01:37.443227800Z
EventRecordID 9408
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer Cody-PC
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 80
BugcheckParameter1 0xfffff9cdc1c6500c
BugcheckParameter2 0x0
BugcheckParameter3 0xfffff9600002aafe
BugcheckParameter4 0x5
SleepInProgress false
PowerButtonTimestamp 0
 

More replies
Relevance 82.41%

Hi everyone.. im not sure where to post this..i need some help here..

Here's the scenario:

When i first got my computer,there wasnt any noise during startup..there's some sort of noise when it starts up now,been at it for months..that doesnt really bother me..

Today,i was playing an online game when suddenly my screen turned black and stuffs,it says no signal on my monitor,then suddenly it came back up with some error and on the bottom right it says it had just recoverd from some kernel error..

I ignored it and continued playing and suddenly around 30 secs later it frozed and theres some beeping sounds non-stop until i forced shutdown via the power button..

I checked the eventlog and found out about this event 41 id problem..im not sure of what to do and what to provide..please help me.

Update: currently updating this in safemode with networking..as i was surfing the net earlier,the screen turned a lil pink..and i could do anything but move the mouse.. so i forced shutdown again and went to safe mode..sigh.

Answer:Kernel error Event id 41

Welcome to Windows Seven Forums.

Have a look at this Microsoft article: Windows Kernel event ID 41 error in Windows 7 or in Windows Server 2008 R2:

Posting your computer specifications will also help us to help you.

Screenshots and Files - Upload and Post in Seven Forums

6 more replies
Relevance 82.41%

*sorry for the duplicate thread, realized I posted in the wrong section!*

Hello all!

I have been having problems with this damned error for the past month now, and my tireless efforts to find a solution have been futile. My computer randomly shuts off as soon as I launch games like Battlefield 3 or Skyrim, and get about 5 minutes into them.

I've checked my temperatures and its not over heating, I cleaned the dust out of most the fans. My BIOS Is up to date, Im pretty sure its not my Power supply (650 w Thermaltake), I've tried updating some drivers, disabling audio drivers, switching USB ports... NOTHING WORKS.

These are my specs

Windows 7 Home Premium Sp1
x64 Based
AMD Phenom II X4 965 Processor, 3400 Mhz, 4 Cores, only 3 activated
M4A88T-M/USB3 Motherboard
4GBs GSKILL Ripjaw Series DDR3
Nvidea GTX 460 1Gb GPU
650W PSU Thermaltake
Cooler Master Storm Scout case /w 4 fans, 2 of which are Red LED.

PLEASE PLEASE PLEASE! Someone help me out with this, I am at my wits end and am ready to blow this damn computer up!

Answer:Kernel Power Event ID 41!!

If any other information is required please do tell!

1 more replies
Relevance 82.41%

I have been having this problem for a good six months now and ive searched all the forums trying many solutions and having none of them help. I have a custom made pc with components totalling up to around ?1000 as shown below.

Asus Crosshair IV Extreme AMD 890FX (Socket AM3/AM3+) DDR3 Motherboard/

HIS ATI Radeon HD 6950 2048MB GDDR5 PCI-Express Graphics Card/

AMD Phenom II X6 Six Core 1100T Black Edition 3.30GHz (Socket AM3)/

Microsoft Windows 7 Home Premium - Retail (GFC-00025)/

Antec 300 Three Hundred Ultimate Gaming Case/

Cooler Master GX 650W '80 Plus' Power Supply/
OCZ Gold 4GB (2x2GB) DDR3 PC3-10666C9 1333MHz Low-Voltage Dual Channel Kit (OCZ3G1333LV4GK)/

LG GH24NS50 24x DVD?RW SATA ReWriter (Black) -

Western Digital Caviar Black 1TB SATA 6Gb/s 64MB Cache - OEM (WD1002FAEX)

Whether its watching a video, on facebook or playing a game the computer screen freezes and becomes completely unresponsive and the only way to get the computer working again is to restart it.

Here is the event data shown in eventviewer.


Code:

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2011-11-19T18:49:02.028420100Z

EventRecordID 3786401

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Windows7

- Security

[ UserID] S-1-5-18


- EventData

Bugchec... Read more

Answer:Kernel power event 41, please help!

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

It is almost impossible to spot trends from a single DMP file so if you have m ore than one please upload them. If you only have one please wait until the computer crashes again then upload both.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

4 more replies
Relevance 82.41%

Kernel-Power - Event ID 41 - Pls help

Dear all

Recently I ve been experiencing this problem with Windows 7 Pro and also Ultimate both x86 and x64 respectively. My PC freezes and I have to reset it! This is the error from my event log:

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 24/10/2011 08:11:55
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: <concealed>
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.



Has anyone experienced it before? any solutions please?

Thanks

Answer:Kernel-Power - Event ID 41 - Pls help

Hi ramon82,

Thread has been moved to App/Crashes/Hangs part of the forum instead. The Kernel-Power error is mostly common when the computer doesn't have enough power to keep all components running. Meaning your PSU is most likely damaged/about to die, or you have hardware that drains more power than your PSU can deliver.

Please get back to us with your computers specification.

As a general tip;
Try removing all external harddrives, webcams etc (everything USB/External that drains power from the computer) and run with Mouse/Keyboard only, and see if it reoccurs.

1 more replies
Relevance 82.41%

Hi all,

I've read through the responses for this same issue related to Windows 7 but am not familiar enough with Windows 8 to know if the same fixes would apply.

I got my new ASUS laptop on Mother's Day this year, and the first event happened a week later. I've had this same event happen 6 times since then as shown by the attached image.

I'm comfortable with computers but am not an IT person so I'm not comfortable performing tasks within my system unless I know what the heck I'm doing or why.

I have no clue why this is happening. Suggestions from the W7 forum said overclocking (it's not), heat (this last time it had been in sleep mode while I was out and within moments of waking it up it crashed), sudden loss of power (it's plugged in AND has 100% battery left) and so on. In other words, it doesn't appear to be related to any of those things. It just randomly happens.

Can someone please tell me 1) why this keeps happening and 2) how to fix it? I've been very disappointed in my new laptop since getting it; I've NEVER had such issues with a new computer before. Oh...and I thoroughly dislike Windows 8 and I doubt I'm alone in that view.

Thanks!

Answer:Kernel-power 41 event - how to fix?

Just my two cents but consider yourself very lucky to have only received 6 of those Event ID 41 notices over a two-month timeframe. This is a fairly common anomaly and if it doesn't happen on regular basis, I wouldn't worry about it at all.

5 more replies
Relevance 82.41%

Hello,

This is an issue that's been happening with my computer for about a month now. My computer will randomly shut off ~10-30 minutes after turning on. When I turn my computer on again (after it shuts itself off), it takes 1-3 attempts for it to actually boot properly.. during this time my fan is going nuts and is really loud. One of the first times this happened, I received a BSOD - but I haven't received any others since.

I'd also like to point out that my brother is having this exact same issue and it started to both of us around the same time... (about a month ago)

Here's the event description and my computer details:




HTML Code:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2012-06-29T20:02:25.254811900Z" />
<EventRecordID>133292</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Shane-PC</Computer>
<Security UserID="S-1-5-18" />
... Read more

Answer:Kernel-Power Event ID 41 (63)

Please upload the DMP files and event viewer logs.

If you can't get into Windows, try going into Safe Mode (rapidly tapping the F8 key just before the Windows Splash Screen shows up.

Please provide the following information:



- Please zip up the contents of the C:\Windows\Minidump directory

- Upload it to the Public area of a SkyDrive account ( https://skydrive.live.com )

- Post a link here so we can download it.



and



- Go to Start and type in "msinfo32" and press Enter

- When the utility opens, save a copy of it as an .nfo file, and another copy as a .txt file

- Zip them up and upload them to the Public area of a SkyDrive account ( https://skydrive.live.com )

- Post a link here so we can download it.
Use SkyDrive to upload the collected files:

Use SkyDrive to upload collected files and post screen shot/picture. (Updated: 1/16/2012)
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folde... Read more

10 more replies
Relevance 82.41%

hello,

i have a critical error that make my computer crash and restart. without blue screen.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2011-11-04T16:02:01.250000000Z" />

<EventRecordID>402677</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>dudubitn-PC</Computer>

<Security UserID="S-1-5-18" />

</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0x0</Data>

<Data Name="BugcheckParameter3">0x0</Data>

<Data Name="BugcheckParameter4">0x0</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>

</EventData>
</Event>

cpu:Q6600
memory:2GB
VideoCard:gt8600.
windows 7 ultimate 3... Read more

Answer:kernel-power event 41

Hello & welcome,

* Event ID 41 is basically a timeout waiting for a device to respond.
There is both a description and several fixes here Event ID 41 Source WinMgmt.

Event ID: 41 Source: WinMgmt

* If we had the actual DMP file we might be able to tell you which.

* Your problem may be caused by many things > RAM problems >graphics drivers > overclocking > heat issues > using more than one AntiVirus at the same time > etc etc.

* Make sure PSU is working properly

* If overclocking, restore to original

Some troubleshooting steps you might care to consider.

* How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

* http://www.sevenforums.com/tutorials/818-disk-cleanup-open-use.html

* How to Repair Windows 7 System Files with System File Checker

SFC /SCANNOW Command - System File Checker

6 more replies
Relevance 82.41%

Issue: Kernel-Power Event ID 41 (63)

My computer randomly shuts down. It happens mostly when I leave the computer running and walk away for an extended period of time (couple hours). I have done research and tried to install/update a number of drives but still continue to have the issue.

? OS - Windows 7 Professional x64
? What was the original installed OS on the system? ? Windows 7 fresh install
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail version
? Approximate age of system (hardware) ? 1.5 yrs
? Approximate age of OS installation (if you know) 1.5 yrs
? Have you re-installed the OS? No

? CPU - Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
? Video Card - NVIDIA GeForce GTX 570 (9.18.13.4752)
? MotherBoard (if NOT a laptop) - CORSAIR HX Series HX750
? Power Supply - brand & wattage (if NOT a laptop) ? AsRock Z77 Extreme4
? System Manufacturer ? Built myself
Laptop or Desktop? - Desktop

Answer:Win 7 Kernel-Power Event ID 41 (63)

Kernel-Power Event ID 41 simply means what you already know the PC shut down unexpectedly either on it's own or because it bsod'd and you cut the power or hit the reset switch.

Assuming it does it shut off without a BSOD lets get a look at the temps and voltages.
D/L and run Hardware Monitor do something intense like a virus scan or gaming for a bit, Alt+Tab back to HWM expand all the trees and use the Win7 snipping tool to grab a screen shot of the HWM window, post the screen shot using the paperclip button in the advanced message box(Go Advanced button).

Of the 6 .dmp files from this year 5 are blaming a native Windows driver pci.sys which is most likely means it is the driver finding a fault and calling for a stop.
1 blaming the Nvidia driver.

If the Bsod's are continuing lets run driver verifier and see if it pokes a rouge driver into revealing itself.
> Follow the instructions here, make sure to set a restore point before enabling verifier, also if you do not have Windows disk create a Windows repair disk verfier set up instructions here>
http://www.techsupportforum.com/foru...ed-473665.html

And of run Memtest86+ to test the ram, you have quite a bit of ram so testing for 6 passes will take quite a bit of time.
D/L Memtest+ Here are some helpful instructions > How to perform a MemTest86+ Test | Tech Support Forum


Code:


Debug session time: Fri Mar 13 12:08:23.259 2015 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\SysnativeB... Read more

8 more replies
Relevance 82.41%

- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2013-03-12T03:01:37.443227800Z
EventRecordID 9408
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer Cody-PC
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 80
BugcheckParameter1 0xfffff9cdc1c6500c
BugcheckParameter2 0x0
BugcheckParameter3 0xfffff9600002aafe
BugcheckParameter4 0x5
SleepInProgress false
PowerButtonTimestamp 0

Answer:BSOD Kernel event 41

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

9 more replies
Relevance 82.41%

Hi guys for the past few days sometimes my computer starts to freeze for a sec and i cant move my mouse around and it will restarts by it self.
when i go check my Events logs for my pc this comes up Kernel-Power Event id 41 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Also when i go check my Reliability Monitor in Windows 10 it says Windows was not properly shut down. does anyone know how to fix this problem? i wanst sure where to post this because it wasn't Blue screen it just freezes you cant move anything makes random sound like bluescreen and than restarts can anyone help me out thanks

More replies
Relevance 82.41%

I know this was last raised here in 2009/2010, I have started to get these reboots on a regular but intermittent basis for the past 2 months, so far, always when returning to an idle machine with nothing running. I have a DEL Inspiron 580 with Windows 7 Home Premium Edition (64-bit) with Service Pack 1. Has anything been resolved for this issue in recent times please? I have read the Microsoft article 2028504 and have not attempted to associate my problem with those 3 scenarios and their so-called resolutions. I am not very technically proficient and hope there is a straightforward solution, but judging from the 2009/20010 comments doubt there is one. I noticed some victims quoted their Eventdata, so here is mine for what it may be worth.
Bugcheckcode80
BugcheckParameter1 0xffffffffffffffd0
BugcheckParameter2 0x1
BugcheckParameter3 0xfffff800032cce0d
BugcheckParameter4 0x0
SleepinProgress false
PowerButtonTimestamp0

Answer:Kernel Power Event ID 41

With no replies after 10 days I guess no one has an answer. I have just had another after a lapse of over one week. I will close this if no one replies soon. The bugnumber is 80 again.

4 more replies
Relevance 82.41%

Eventlog show an event 219: The only smart card reader I can see in the device manager is the -  NXP's ProximityBased SmartCard ReaderDevice Status: This device is working properly. Reinstalled it, still comes back in the event log. Anyone???? Evenlog: The driver \Driver\WUDFRd failed to load for the device Root\SMARTCARDREADER\0000.  Detailed; - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System>  <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />  <EventID>219</EventID>  <Version>0</Version>  <Level>3</Level>  <Task>212</Task>  <Opcode>0</Opcode>  <Keywords>0x8000000000000000</Keywords>  <TimeCreated SystemTime="2016-10-21T13:18:37.495200000Z" />  <EventRecordID>5467</EventRecordID>  <Correlation />  <Execution ProcessID="4" ThreadID="92" />  <Channel>System</Channel>  <Computer>admin-PC</Computer>  <Security UserID="S-1-5-18" />  </System>- <EventData>  <Data Name="DriverNameLength">25</Data>  <Data Name="DriverName">Root\SMARTCARDREADER\0000</Data>  <Data Name="Status">3221226341</Data>  <Data Name="FailureNameLength">14</Data>  <Data Name="FailureNa... Read more

More replies
Relevance 82.41%

I keep getting a Kernel Power Critical error 41 at random times. I have no rhyme or reason to decipher why the crashes are occurring. Here are my dumps.

Answer:Kernel Power 41 Event

Hi.

They're memory type of errors associated with different drivers and .exe.

Check that the correct Vdimm (RAM voltage) and timings are set in the bios specific to your RAM modules. Visit RAM maker's site for details and adjust accordingly.

Edit - According to this (if it's for your specific RAM modules), 1.5v is default so leave that alone. You could set timings to 9-9-9-24 though.

Run Memtest overnight to see if it picks up on any errors.

6 more replies
Relevance 82.41%

Sorry to add another problem to the pile of Event 41s,

Mobo: ASRock FM2A88X-ITX+
RAM: 16GB Team Vulcan (Also attempted with G.Skill Ripjaws, no change)
CPU: AMD A10-7870K Radeon R7 @ 3.9 GHz
GPU: AMD R9 280X @ 3GB (PowerColor)
PSU: Corsair 600W (Had 500W, believed issue to be related with power, replaced with 600W, no change.)
Storage: 120GB Sandisk SSD / 1TB HGST 2.5" @ 5400RPM

The issue seems to happen during video games (World of Warcraft, Fallout 4, and Heroes of the Storm). It has happened as well simply using Google Chrome and Skype.

I have ran every single malware/spyware/adware/antivirus program that I can get my hands on, no change. I have used several registry repair/optimization programs (trusted ones), no change.

I'm A+/Net+/ACMT certified, and I doubt it's anything hardware-wise. Temps are staying below scary levels and almost every part has been replaced with a KG I had laying around.

Thanks for everything in advance!

Answer:Kernel-Power (Event 41)

Please update following drivers
Driver Reference Table - vhidmini.sys
Driver Reference Table - L1C63x64.sys
Driver Reference Table - btfilter.sys

Have you used any hardware tests?

0 more replies
Relevance 82.41%

Hi. I recently did a fresh install of Windows 8.1 because of this problem and thought that would fix it. After a few days my computer would freeze with a loud sound coming through the speakers and then restart automatically after. The event viewer lists Kernel-Power event ID 41. This is also a brand new computer I built.

Answer:Kernel-Power event ID 41

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field.

In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.

Regards,
Pranav

1 more replies
Relevance 82.41%

the last couple of months on a daily basis my pc will crash sounds too makes a horrible noise ive checked event log and its always critial kernel power event id 41 task 63 how do i get my files so you guys can see them and help

it never does it while gaming only when browsing internet and having itunes on

Specs are
ASrock 970 pro3
AMD FX 8350 black edition
16GB G-skill Ram 1866
120gb ocz solid state drive sata 3
500 Hitachi deskstar hard drive sata 2
750w OCZ ZT series power supply (newest item but done it before i put this in)

Answer:event 41 kernel power how do i fix this

Please follow the Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Relevance 82.41%

Hello all,

Been having unexpected crashes lately on my Pc. I am running windows 7 ultimate x64. And I have been getting the Kernel-power 41. The events before the crash are random. I have read a couple of posts on this forum but I cant seem to find the ones I used yesterday to link to.

So I ran a cpu stress test for 8 hours and it was fine. And a memtest for 8 hours no errors. And I just finished a 8 hour gpu stress test and that went fine.

This is the log form the crash:


Code:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2013-02-05T00:35:39.838023400Z" />
<EventRecordID>16939</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Ali-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>... Read more

Answer:Kernel-Power Event 41

In some posts people said it might be driver issue so this is a driver list:

Code:
Module Name Display Name Driver Type Link Date
============ ====================== ============= ======================
1394ohci 1394 OHCI Compliant Ho Kernel 11/20/2010 4:44:56 AM
ACPI Microsoft ACPI Driver Kernel 11/20/2010 3:19:16 AM
AcpiPmi ACPI Power Meter Drive Kernel 11/20/2010 3:30:42 AM
adp94xx adp94xx Kernel 12/5/2008 5:54:42 PM
adpahci adpahci Kernel 5/1/2007 12:30:09 PM
adpu320 adpu320 Kernel 2/27/2007 6:04:15 PM
AFD Ancillary Function Dri Kernel 12/27/2011 9:59:20 PM
agp440 Intel AGP Bus Filter Kernel 7/13/2009 6:38:43 PM
aliide aliide Kernel 7/13/2009 6:19:47 PM
amdide amdide Kernel 7/13/2009 6:19:49 PM
AmdK8 AMD K8 Processor Drive Kernel 7/13/2009 6:19:25 PM
AmdPPM AMD Processor Driver Kernel 7/13/2009 6:19:25 PM
amdsata amdsata Kernel 3/18/2010 7:45:17 PM
amdsbs amdsbs Kernel 3/20/2009 1:36:03 PM
amdxata amdxata Kernel 3/19/2010 11:18:18 AM
AppID AppID Driver Kernel 11/20/2010 4:14:37 AM
arc arc Kernel 5/24/2007 4:27:55 PM
arcsa... Read more

3 more replies
Relevance 82.41%

I keep getting a Kernel Power Critical error 41 at random times.

I am running a i5 750 with a MSI P55-CD53 mobo. 8gbs of Corsiar XMS DDR3. Nvidia GTX 260 with a Earthwatts 700.

Here are my minidumps.
 

Answer:Kernel Power 41 Event

No takers? I can provide more dumps if necessary. This has been going on since I upgraded to 7.
 

5 more replies
Relevance 82.41%

Hi all.
Laterly I've been having trouble with my computer crashing, but not rebooting straight away. To restart the computer I have to manually turn the PC off by the power switch.

After checking the event viewer I have found that each time the computer has crashed there is a log for "Kernel-Power" with Event ID: 41.






Quote:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2010-01-28T19:30:35.656250000Z" />

<EventRecordID>32704</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Chris-PC</Computer>

<Security UserID="S-1-5-18" />

</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0x0</Data>

<Data Name="Bu... Read more

Answer:Kernel-Power (Event ID: 41)

  
Quote: Originally Posted by chrismid259


Hi all.
Laterly I've been having trouble with my computer crashing, but not rebooting straight away. To restart the computer I have to manually turn the PC off by the power switch.

After checking the event viewer I have found that each time the computer has crashed there is a log for "Kernel-Power" with Event ID: 41.






Quote:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2010-01-28T19:30:35.656250000Z" />

<EventRecordID>32704</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Chris-PC</Computer>

<Security UserID="S-1-5-18" />

</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name=&q... Read more

3 more replies
Relevance 82.41%

System hanging.

AMD 1090t
8gb Corsair
Windows 7 64

Only 2 dumps I have.

Answer:Power Event Kernel 41 (63)

Hello,

I would start by updating this old, 2005 driver. One of most causes of BSOD. See the instruction below regarding on updating it.


Code:
fffff880`0417d000 fffff880`04185000 ASACPI ASACPI.sys Mon Mar 28 15:30:36 2005 (42476C4C)





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

1 more replies
Relevance 82.41%

Just got this new computer earlier this month and since I have had 3 BSOD's. The first happened while watching a Youtube Video, the second while watching Plex, and the third while I was watching Twitch. They come up with the same error each time and it's "Kernel-Power" Event ID 41 Task Category (63) I am BEGGING someone to help me figure out what it could be and help me fix it. This is a brand new computer and I was hoping to have some solution or idea as to what it could be. I have attached what I believe it the proper .dmp zip of the most recent event.

Thank you SO MUCH to everyone in advance for helping me through this.

EDIT: I have attached all 3 of the .dmp's from all 3 crashes.

So sorry for posting it in the wrong thread earlier!

Answer:Kernel-Power Event ID 41 PLEASE HELP

Hi TCUFrogs & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same :-

Code:
**************************Wed Jul 30 08:54:57.643 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for atikmdag.sys

*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

Probably caused by : atikmdag.sys ( atikmdag+2783e )

BugCheck A0000001, {5, 0, 0, 0}
BugCheck Info: Unknown bugcheck code (a0000001)

BUGCHECK_STR: 0xA0000001

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0xA0000001_atikmdag+2783e

BIOS Version V25.0

BIOS Release Date 05/28/2013

Manufacturer MSI

Product Name MS-7641

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Jul 26 15:17:36.538 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for atikmdag.sys

*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

Probably caused by : atikmdag.sys ( atikmdag+2783e )

BugCheck A0000001, {5, 0, 0, 0}
BugCheck Info: Unknown bugcheck code (a0000001)

BUGCHECK_STR: 0xA0000001

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: firefox.exe

FAILURE_BUCKET_ID: 0xA0000001_atikmdag+2783e

BIOS Version V25.0

BIOS Release Date ... Read more

1 more replies
Relevance 82.41%

Are you getting a BSOD? Does this error pop up in a box after booting back into windows?

Can you upload a report please
http://www.techsupportforum.com/foru...ta-452654.html

Answer:event 41 kernel-power (63)

i hope i did that right for the files i put them in a folder and rar it. also to the Bsod i do not get one, it just restarts and while it is restarting i will get the menu which has the option to start windows normal ect. then it loads up, can cause data loss. ohh and also no this error doesnt pop up after i load back up.i would have to go to event viewer to see it. thnx for your help.

2 more replies
Relevance 81.18%

hi there all i recently got a new ati sapphire hd5850 graphics card laterly and since i have had the card ive been receiveing kernel power errors and even blue screens
i have a Imicro 750watt power supply and i dont know if this could be causing the problem or not ive received about 2 blue screens and have 5 minidump files

i was certain the power supply had enough juice to run the card and each 12 volt rail has 20 amps though i duno if they are 75 watt cables which could be the problem anyway the problem appears to happen after gaming when i come back to windows the whole system will lock up and the screen goes off ie the lights are on but nobodies home

the weird thing is this happens in a space of days anyways was wondering if someone could read the minidump files for me i dont know how or of any programs that can read minidumps

cheers in advance

Answer:Kernel power error event id 41

o yea sorry to double post but i forgot to tell people my email if someone can tell me what is wrong with this or any insite at all please feel free to email me at [email protected]

9 more replies
Relevance 81.18%

Since Windows 7 was installed by a tech person, I have rec'd in Administrative Events this same error, over and over at least 500 times. The tech person said to ignore it. I don't agree.

I went to Performance Monitor to Data Collector and tried to figure out what to change in Trace Sessions in various files listed, but did not help. Removing Microsoft Security did stop it for awhile but I read that when you remove that , you must also remove something else, and I am not finding that something else, which was like ietl
( I could have that wrong, need to re-check that comment).

Does anyone know how to fix Kernel Event Tracing error?

 

More replies
Relevance 81.18%

My issue started 2 weeks ago. The computer would just shut off and would not turn back on via the power button on the front panel. I would switch the power switch on the PSU of then back on and the PC would turn itself on again. There is no BSOD with this error.

It would happen at random. Sometimes back to back or it would go 3 days and it didn't matter what the PC was doing; heavy gaming, 3D modeling, or just sitting idle.

My initial research on Google often mentioned this error with a bad or failing PSU.

So, on 3/19/16 I purchased a brand new EVGA 750 P2 Supernova

Everything was good until just now. I was watching some YouTube videos and she went off.

So, now I am lost at where to look. I'm sure the PSU is good, well, 99.9% sure since it is new.

The only thing I tried was to set the BIOS back to default optimized settings.

I'm considering a full reformat but I am hoping someone may have some other information on this Event Error and things I could try or test.

Below is the error info.


Code:
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 3/19/2016 4:49:28 AM
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (70368744177664),(2)
User: SYSTEM
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/ev... Read more

More replies
Relevance 81.18%

Hello,

I've been encountering some nasty crashes while gaming.

The screen will flicker and stay black and the sound will become garbled and loop endlessly until I press the reset button. No keyboard commands will work.

Originally I thought it was an issue specific to Mass Effect (due to known sound card compatability issues) but I've now noticed the issue in other games like Mass Effect 2 and Aliens Vs Predator.

I don't seem to recall ever seeing the issue in general computer use or other viewing other media.

I recently became acquainted with Event Viewer which is where I discovered this "Event ID 41" notification. Apparently I've had 25 instances of this in the last 2 months.

Here are my specifications and a DirectX report:

Processor: Intel Core i7 920 (overlocked after the crashes to 3.0 Ghz)
Motherboard: Gigabyte GA-X58-UD5P
Memory: Corsair XMS3 DDR3 1600 Mhz
Video Card: GeForce GTX 285 SLI (XFX factory overclocked)
Sound Card: Creative X-Fi Titanium PCI-E
Operating System: Windows 7 Professional 64-bit
Power Supply: Antec Truepower Quattro 850W

All drivers are up to date, official, PC temperatures are all within normal ranges and the only hardware I've overclocked personally is the processor. The crashes are experienced regardless if it's overclocked or not.

Thanks for your time.

Answer:Event ID 41 - Kernel Power (Crash)

post the dumps for someone to check

http://www.techsupportforum.com/f217...ns-452654.html

1 more replies
Relevance 81.18%

Hey everyone. I'm new to this kind of stuff and trying to learn what is going on.

PC was made 2 years ago and haven't really used it until now. It previously had win7 and it BSOD a couple times a week but didn't bother me at the time.

Now the computer has a fresh install of win10. It doesn't BSOD/restart on me while I'm using it but over night I get multiple kernel-power 41 events. (I have the computer on high performance in power options to see if the computer was stable).However, there are no mini.dmp files that is created. I made sure the computer creates files and doesn't auto-restart. After all that I still don't have any dmp files. I looked around and found one file in C:\windows\LiveKernelReports\win32k.sys folder, which is attached.

Also I tested each stick of memory separately overnight and switched out the old power supply. Not sure what to do next.
Is the motherboard faulty?

Answer:Kernel-Power 41 event. Not sure if BSOD.

My lady mention that while she was listening to music on spotify, the computer went to a "black screen" and was unresponsive. Said no other program was running at the time.

2 more replies