Computer Support Forum

Don't have Recovery partition and Recovery Manager to Reset ...

Question: Don't have Recovery partition and Recovery Manager to Reset ...

My laptop has become very slow, I reinstalled windows and installed original drivers from HP's website. But, my laptop is still very slow. So, I'm hinking about restoring my laptop to factory settings. I don't have HP Backup & Recovery manager or Recovery Partition or any disc that came with laptop. If there is any way I can restore my laptop to Factory Settings, Please inform . And If I need to download anyting please give the link with it. Thank You.

Relevance 100%
Preferred Solution: Don't have Recovery partition and Recovery Manager to Reset ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Don't have Recovery partition and Recovery Manager to Reset ...

Hi there @HPian_B, Before I provide troubleshooting documentation, I would like to take a minute to welcome you to the HP Support Community, where you can ask questions, find solutions and get help from the community! I read that you would like to reset your HP Pavilion g6-2310ex Notebook PC to factory settings. Please read the document called Backing Up Your Files. This will provide you with ways to back up the files you have on your Notebook. Here is a document for you to read called Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive. I pulled some information from the document for you. The first thing I would like to make you aware of is that only DVD-R, DVD-R DL, DVD+R, or DVD+R DL discs are compatible with the Recovery Media Creation program. The following disc types are not compatible with the Recovery Media Creation program:CDsDVD-RWDVD+RWDVD-RW DLDVD+RW DLYou will then also see that in the document it says: The Recovery Media Creation software program allows only one complete set of discs to be created.The Recovery Media Creation software program requires an uncorrupted recovery partition (Recovery Image (D) to create a set of discs. Uncorrupted means the recovery partition has not been modified or removed.The creation process takes about 30 minutes per DVD. The entire recovery set does not need to be created in one session.The Recovery Media Creation software can be aborted at any time, except during the writing (burning) process, by clicking Cancel. The next time the Recovery Media Creation software program is run, it automatically starts where it last stopped.You can use the recovery discs you create on your computer on another computer only if the second computer is the same model as the one that created the recovery discs.Here is a document called Performing an HP system recovery (Windows 7) and another called Recover Windows 7 Operating System Using Microsoft Windows Backup and Restore. - This is used to Recover, Restore, or do a Clean Install of Windows 7. Please make sure that you read these documents very carefully before you decided to reset to factory settings. Thanks for being a part of the HP community. Please let me know if this helps resolve the issue by marking this post as "Accept as Solution". If you require further assistance let me know and I will gladly do all I can to help. Please also re-post with the exact error message you received. If you wish to say "thanks" for my effort to help, click the "thumbs up" to give me a Kudos. Thanks!Have a great day

1 more replies
Relevance 97.99%

Hello, I just migrated my X240 OS (Win8.1) from HDD to SSD, and swapped the HDD with SSD. Everything went smooth, so instead of the 500GB HDD I now had a 500GB SSD. However, I thought it might be best to start 'fresh'and do a reset to factory settings. On the SSD (a clone of the HDD) I see all partions, including the Recovery partition. However, if I attempt to reset to factory settings, I get the message that Windows could not find the Recovery environment. I did make a recovery USB flash drive, but it doesn't help at all. Also, booting from the recovery USB drive does not work -the screen remains black when I try to boot from it. So, even though I still have the recovery partition and though I have a recovery USB, I don't seem to be able to do a clean install. Does anybody know what I'm doing wrong or how I can do the reset? If my recovery partition/USB flash drive fail, can I get a Win8.1 DVD/download from Lenovo perhaps? After all, I have a legitimate Win8 version and I think I took all reasonable precautions by creating a recovery USB flash drive... Any help is appreciated. Many thanks! 

Answer:Cannot reset X240 to factory settings with Recovery partition / USB Recovery drive

Following up on my post, I finally managed to do a clean install/reset to factory settings using my "old" HDD drive (the original drive from which I cloned to SSD) in an external casing via USB. So apparently the Recovery partition on the HDD was functional.However, I'm still not able to make a functional Recovery USB flash drive. I already made 1 in the past, and I just re-did this, but when I try to boot from the recovery flash drive, I just get a black screen and nothing happens. I noticed during creation of the Recovery flash drive, that I cannot select the option to copy the contents of the Recovery Partion to the flash drive. That's why the size is so small I guess: only a few hundred MB whereas the flash drive is 32GB in size. I presume this is the reason I cannot use/boot from the Recovery USB flash drive. Does anyone know why I can't create a proper USB Recovery flash drive?  All help is appreciated!  

1 more replies
Relevance 93.07%

.... but I didn't touch it.
My d:\ is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either. Please help

Answer:HP Recovery Manager says that my recovery partition has been removed

Recovery Manager has hiccups sometimes...
Try re-booting and entering at boot.

If that fails you can order the Recovery Media from HP for a reasonable price.

4 more replies
Relevance 93.07%

HP Pavilion Elite HPE-112y PC.
Genuine Windows 7 Home Premium - 64-bit.

:confused

I'm having problems with my Recovery Manager. A couple of days ago it was working fine. Yesterday when I tried to access either the "Software Program Reinstallation" or the "Hardware Driver Reinstallation" to check something out both my DVD and BD drives would open and a message pops up saying:

This system does not have a recovery partition. The recovery process needs to use the set of recovery discs you created previously. Please insert disc #1 now.

I did not create any such recovery discs. I don't know how this happened. When I looked in the "I'd like to take precautions" section of the Recovery Manager the "Recovery Disc Creation" and the "Remove Recovery Partition" are grayed out, but the "View Recovery Report" is still active and there is some kind of report in it. I don't know what it means.

I hope someone can tell me that my Recovery Partition is still there and I can restore it.

:cry
 

Answer:Recovery Manager missing Recovery Partition

Right click Computer > Manage > Disk Management and post a screenshot covering both top and bottom halves. Then we can tell you what you have and what you do not have.
 

9 more replies
Relevance 93.07%

Hello, I upgraded my notebook to Windows 10 shortly after it was offered in August 2015.  I also upgraded my main drive with a smaller SSD.  So, now that the notebook's been running OK for almost a year, I'd like to delete the recovery partition.  I only have a 256 GB SSD, so deleting that Recovery partition would give me almost 50% more space on my C drive. I tried using two different partition programs to do this-- both apps let me delete the partition (D: Recovery-- far right, top), but then neither will let me add the new space to the C drive.  There is small partition between the two, and they will let me resize that partition, but not the C partition.   I found that the HP Recovery Manager that's installed on my notebook has an option for deleting the partition, but it doesn't say where it will put the new unallocated space (but I didn't go all the way with it yet.  If I work through it the rest of the way, will it give me the option of where to put the new unallocated space?  Or will it add it to the C drive automatically?  Below is a snapshot of the drives configuration (the drive on TOP is the one in question): 

Answer:Using HP Recovery Manager to delete the Recovery Partition--...

Hi, I can see C: and D: do not sit next to each other therefore Windows Disk Manager may not like this. Please try:     http://www.easeus.com/partition-manager-software/combine-partitions-windows-10-free.html Note: you have to delete D: first. Regards.

1 more replies
Relevance 89.79%

My laptop crashed but I was bale to recover my data from the drive using an external cable to the drive on my desktop PC.  I can see the recovery partition, can I make a recover USB from the drive without it being in my laptop?

Answer:Re: Don't have Recovery partition and Recovery Manager to Re...

Hi there,  Do you not have Recovery discs?How did you previously load Windows 7 on your Notebook? The media creation software allows only  one system image to be created. If you created a set of recovery discs, you can not create a system image on a USB drive. The media creation software requires an uncorrupted recovery partition (FACTORY_IMAGE D. Uncorrupted means that the recovery partition has  not been modified or removed. That being said, at this point, I cannot guarantee that the image will work on your USB. 

8 more replies
Relevance 86.1%

Hi everyone, I know this must sound like a real stupid title, but please bear with me for a moment: Having wiped my R50p clean with the "Access IBM" button, I noticed that I only had a C drive with 20 GB of which much was in use. In Windows XP Disk Manager I saw that there was a whopping 55 GB on a hidden partition that I only had the option of to "remove", not to activate or anything else. Realising that this was the hidden partition with the IBM restore files, I was hesitant to take any action. After doing some research on several forums I found that the recovery part should only take up 20 GB, which corresponded somewhat to the fact that Disk Manager showed 42 GB of 55 GB to be "free" (if only I could use the free space!). In order to access those magnificent 42 free GBs on the 55 GB hidden partition, I first created a ThinkVantage recovery disc (strangely it was only one CD-R) and disabled IBM Predesktop Area in the BIOS. As a result, I proceeded with deleting the 55 GB partition and it became unallocated space, therefore allowing me to make it a new partition and assign a drive letter (in this case D), doing a "quick format (NTFS)" in order to be able to use the space available, and finally giving me the full 55 GB. Since I had preferred to leave the recovery files on the hidden partition, but had no idea how to access the useful other 42 GBs, I followed the abovementioned procedure. Now my question is whether it's possible to recreate another hidden parti... Read more

Answer:?? Restore Recovery Partition with Recovery Disc after deleting Recovery Partition

pvanedan, welcome to the forum, after reading your post several times I think I understand your situation as it is now. The answer is as follows; which you may not like sorry  You have successfully deleted the recovery partition in order to gain more space, that's the good news  The cd you have created is only a boot cd and not a recovery cd, this would be used to boot your ThinkPad and access a recovery backup which is stored on another hard drive, cd/dvds or over network. It alone is not able to recreate the recovery partition which you no longer have, that's the bad news  I would suggest backing up your files regularly and using an appropriate imaging software to backup your installation. Edit: What I don't understand is; why 55GB? The partition should have been around 4GB, maybe it was full of backups??Message Edited by andyP on 07-03-2008 07:30 PM

4 more replies
Relevance 83.23%

Hi guys!

SCENARIO: I wen on a factory reset and it froze at around 75% while resetting. It already took 4-5 hours on 75% so there came my impatience and overthinking (I'm sorry ) that it was either starting to be a faulty HDD or my BIOS was outdated. So I tried to force stop (HDD risky, I'm sorry again) the reset procedure (while stucked at 75%) and was hoping that I could somehow update my BIOS and resume with the reset. But as I opened the unit again, it continued with installing the OS which is WIN10 again (I was hoping this would be Win8 since it was the factory OS ). So I just let it finish and was hoping that I could revert back to the factory OS.

I also tried the different instructions from dell and windows on how to reset the unit but still in no luck. And I have not made a recovery image disk beforehand

The unit is a Dell Inspiron laptop that came with pre-installed UEFI activated (I believe) Win8.0 that has been updated to 8.1 and Win10 over the time.


PROBLEM: Reset function not working properly or as expected anymore. I think it lost it's link with the original recovery image. I have been reading a lot from the related posts from several threads here but still out of luck (or I am really that noob. Haha! ). I believed I might have also messed up mapping reagentc along the way as I don't remember the previous data anymore. I have tried to do as others had their luck but I get lost as their parameters are not the same as mine (at least from what I have... Read more

More replies
Relevance 83.23%

Hello.

I have a problem with restoring (reseting) my OS to factory image using Recovery partition. The problem is not that uncommon, yet I've tried a gadzillion things and none seem to work (or I've been doing them wrong). And I was hoping you guys could have a look and point me toward a resolution.

The computer is an Asus X553M laptop, which came with W8.1 wBing pre-installed and two visible partitions (C - os, D - data). There was also a 100MB System partition, 900MB Restore partition (the one I am now booting to, I suspect, more on that later), 128MB Reserved partition, and 20GB Recovery one (the one with system image). It worked fine for some time, then I upgraded it to W10, then worked fine some more, but problems started popping up, so I decided to start anew with a fresh system install. I wanted to try if W7 would work, I popped the CD in, formatted C and D. Wanting only one working partition, I deleted C and D (only!, I left all the remaining partitions, including Recovery) and made a single partition in their place. However, it turned out, the disk is GPT and W7 wouldn't install out of box, so I thought no biggie, I will restore the 8.1.

I booted to Troubleshooting (I think it is called), clicked Reset PC and 'A required drive partition is missing'. I thought I could get around it by extracting the key and installing Win8.1 from Microsoft's ISO, but it turns out Win8.1 != Win8.1 wBing (the key didn't work. Oh, well). So, now I have to somehow get the Reset PC work... Read more

More replies
Relevance 83.23%

I purchased a Lenovo L440 with Windows 8.1 and a license for Office 2013 (it came preinstalled, no separate key). I upgraded to Windows 10 when that came available. Now I need to perform a full reset (refresh isn't good enough).

Unfortunately, doing a reset as is means I'm getting a fresh install of Windows 10 but that doesn't include the copy of Office 2013 or any of the other Lenovo software that originally came with the computer (blessing?).

a) Is there a way to at least get back Office 2013 and activate it somehow?

b) When I upgraded to Windows 10 it created its own recovery partition but the original Lenovo OEM Windows 8.1 partition wasn't deleted. Is there a way to get computer to reset using that recovery partition instead? At least then it would create a fresh install with those factory settings then I can upgrade everything from there.

Edit / Updates: Reason for reset is to deal with malware. Refresh could leave it behind.

Here's image of what partitions look like. Ignore Disk 2. That's a usb.

Answer:Reset Windows with Older Recovery Partition

There's the Windows Reset that reinstalls Win10 but there should be a choice on maybe the F12 key menu at initial bootup to set it back to Factory Restore, same as when it shipped. I've had to do a few.

I don't know if the dealer installed Office or not, none of my new ones came with Office from the manufacturer.

I use ShowKeyPlus to get the Windows key/s [posted on this forum] but maybe the free Belarc Advisor can give up the Office key. There are some paid-for programs available that can do it.
Belarc - System Management For The Internet Age. Software license management, IT asset management, IT security audits and more.

12 more replies
Relevance 82.41%

I bought my device with Windows 10 as pre-installed OS. Due to *careless* activity, I accidentally deleted the recovery partition of the hard disk. If some day I wanted to do a Windows 10 reset, will the reset process be failed?

I wanted to order for recovery disk from my vendor but they only provide media for Windows 7 pro and using this recovery option will downgrade my device and I cannot use windows 10 without having to buy another activation key (correct me if I am wrong here).

Answer:Reset Windows 10 even if Recovery Partition is (accidentally) deleted

Hi,
1. You can freely get Win 10 installation media. You can download any version's iso and, using MS's media creation tool, create bootable Win 10 installation media.

See the Tutorial section- search for iso- or search the web.

2. You can undelete deleted partitions. Try a good partition manager.

Example:

4 more replies
Relevance 82.41%

I bought my device with Windows 10 as pre-installed OS. Due to *careless* activity, I accidentally deleted the recovery partition of the hard disk. If some day I wanted to do a Windows 10 reset, will the reset process be failed?

I wanted to order for recovery disk from my vendor but they only provide media for Windows 7 pro and using this recovery option will downgrade my device and I cannot use windows 10 without having to buy another activation key (correct me if I am wrong here).

Answer:Reset Windows 10 even if Recovery Partition is (accidentally) deleted

Hi,
1. You can freely get Win 10 installation media. You can download any version's iso and, using MS's media creation tool, create bootable Win 10 installation media.

See the Tutorial section- search for iso- or search the web.

2. You can undelete deleted partitions. Try a good partition manager.

Example:

4 more replies
Relevance 82.41%

 Just need a Ok signal everything is fine with my pc . Though Gmer & HijackThis says otherwise . Thanks for helping me , you have my lifelong thanks

Answer:Recently Factory Reset from recovery partition / am I clean ?

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===All I can suggest at this time.Press the windows key + r on your keyboard at the same time. This will open the RUN BOX.Type Notepad and and click the OK key.Please copy the entire contents of the code box below to the a new file.

start

CreateRestorePoint:
EmptyTemp:
CloseProcesses:

HKLM-x32\...\Run: [] => [X]
HKLM-x32\...\Run: [FAStartup] => [X]
Winlogon\Notify\WB: C:\Program Files (x86)\Stardock\MyColors\fast64.dll [X]
HKLM\SOFTWARE\Policies\Microsoft\Internet Explorer: Restriction <======= ATTENTION
HKU\S-1-5-21-3495472100-3376017760-3872212700-1000\SOFTWARE\Policies\Microsoft\Internet Explorer: Restriction <======= ATTENTION

End
Save the file as fixlist.txt in the same folder where the Farbar tool is running from.The location is listed in the 3rd line of the Farbar log you have submitted.Run FRST and click Fix only once and wait.Restart the computer normally to reset the registry.The tool will create a log (Fixlog.txt) please post it to your reply.===How is the computer running now?If you have any issues with this computer please let me know.

2 more replies
Relevance 82.41%

Hi, everybody.  Can someone solve my pb?I have Hp Pvilion Dv6-1355dx laptop. I bought it in jan 2010. Till this month it worked great. But now i hav a pb.Actually i was doing recovery of my windows 7, there was interruption bcoz of electricity pb. After that my laptop's OS wasnt loading, and i cldnt find recovery manager. Then i installed new windows 7. (bcoz i didnt hav Recovery disc also)  My Hp Softwares arent damaged, I installed hp softwares fm my laptop, now the pb is  MY RECOVERY MANAGER's  IS NOT ABLE  TO  INSTALL, still  i  can see  RECOVERY PARTITION  here.  Now what to do?   Plzzzz tell me how can i use my RECOVERY PARTITION with Recovery Manager.waiting Anxiously.Regards











Solved!
View Solution.

Answer:Recovery Partition not responding to Rec manager

This works sometimes to boot into Recovery and do a Factory restore. 1.Right-click on "Computer" icon and select manage.2.This will launch the Microsoft Management Console.3.On the left side of the MMC, click on "Disk Management" and it will show you all of the partitions.4.Right-click on the "HP Recovery" partition and select "Mark as Active Partition."5.When the warning prompt appears, select "Yes" - Reboot and it will automatically boot into the Recovery Manager (without pressing F11). 

4 more replies
Relevance 82.41%

How to delete Recovery Manager partitoin? After reinstall successfully, it reboots always to Recovery Manager.

Bios is setup with right order of HardDrive first. Tried Boot.exe too.

Is there a command prompt to delete the Recovery Manager partition? I can't get to my desktop.

Answer:How to delete Recovery Manager partition?

Why would you want to delete your Recovery Manager partition? It doesn't sound like the reinstall was successful, if your computer continues to boot into recovery mode. Did you use a recovery disk in this process and later remove it? Try booting up in safe mode. If that doesn't work, then I suspect your recovery did not complete successfully.

Also, you may want to try booting from USB and then accessing the hard drive to see if the integrity is OK.

6 more replies
Relevance 81.59%

I got a Lenovo G500s laptop from lenovo outlet. After resize the C, D partition, the One key recovery function was not working. Finally, got fixed , this is the summary.System:Lenovo G500s, windows8/64bit preinstall, 8GB RAM, 1T HD(only one HD), one key recovery 8.0 Problem:1. Lenovo preset  C: 900GB, D: 25GB (why???????)2. Resize partition to C:350GB, D:600GB(use freeware--- EASEUS Partition manager)3. after then, One key recovery not working SolutionTRY AT YOUR OWN RISK)1. Start a Command Prompt as an Administrator2. >_  diskpart3. >_   select disk 04. >_   list partitionsome partitions show OEM partition type(most likely is patition 1, 3 and 7, these partitions were damaged)select those partitions to check the type ID with the following commands >_ select partition 7>_ detail partitionthe type ID should be de94bba4-06d1-4d40-a16a-bfd50179d6ac. if not, >_ set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac >_ select partition 3>_ detail partitionthe type ID should be BFBFAFE7-A34F-448A-9A5B-6213EB736C22. if not, >_ set id=BFBFAFE7-A34F-448A-9A5B-6213EB736C22 >_ select partition 1>_ detail partitionthe type ID should be de94bba4-06d1-4d40-a16a-bfd50179d6ac. if not, >_ set id=de94bba4-06d1-4d40-a16a-bfd50179d6acNow, try the One key recoverygood luck Reference:I got the ID number from this link. Download the OKR8.0 ISO file , ID number is in file "create.ini". http://plu... Read more

Answer:lenovo G500s, one key recovery problem,fixed with reset partition ID

Thanks IT WORKED WONDERFULLY on my G400s with windows 8. I RISKED it would work since you post it for LENOVO G 500s . But it DOES WORK ON G400s too. Thanks pal

2 more replies
Relevance 81.59%

Hello to Lenovo support(and community)! My laptop: Lenovo G560 (I have noticed some variable specification) I have bought G560 and it came with around 500GB hard disk;partition C: 420-430GB which is for application software, operating system, and user documents.partition D: 30GB for OneKey system reocvery and needed files, perhaps for factory restore.and two more partitions but they are invisible and only found them by running disk management. Now the problem is that I have my files(documents), app software and operating system on the same partition and I want to have only the operating system on C and have app and documents on another partition OR have a new 200-300GB(taken from C) for backups partition.**I know it is not recommended to have backups on the same hard disk, but this is a temporary solution. How can I shrink C to have unallocated space and use it to create a new partition(or more) without corrupting the D OneKey Recovery partition?   Thanks for supporting your customers!!!  

Answer:OneKey System, Recovery partition, need repartition. Will it corrupt recovery partition?

Hello OLL98, welcome to Lenovo forums!
 
You canīt use Onekey Recovery anymore if you change the partitions.
 
So please create your recovery media before, messing up with the partitions. My 2 cents.

2 more replies
Relevance 80.77%

Having some troubles with an upgrade to Windows 8 and just wondering about my options to revert back to Windows 7.Computer is almost brand new with no "personal" information on it.

Answer:Z580 - Does Windows 8 complete reset erase Lenovo recovery partition

What do you mean by "complete reset"? BTW





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

5 more replies
Relevance 80.77%

Gday guys, my toshiba satellite L 50D. stopped working. i was able to get into safe mode to backup my recent files. still did not fix blue screen of death. i did command prompt to error check etc etc. reported no errors but was very very slow - hours. ran ubuntu and it could not access C Drive. i was able to access reset/restore on startup. restore did not complete. so i tried reset - got to about 45% - did not complete. choose full reset/factory reset and gets to about 25% sometimes 40%. Takes hours!! still is incomplete and says 'there was a problem resetting your PC'.

i am (was) running windows 8.1 and do not have any recovery disks. my wife has a working L 50B that we bought at the same time - is it possible to make a recovery disk/usb from it and try and repair my L50D?
or what is the best way to get a recovery disk for this laptop?
appreciate any feedback and suggestions
thanks

More replies
Relevance 77.08%

i tried to burn a Factory Recovery DVD using Onekey Recovery tool. i chose Create Recovery disk, selected Factory Default recovery disk and got to the burning options. The disks were successfully burnt. I tried to burn one more set for safety but I get the following error message. The program cannot find the service partition. This function is currently unavailable. Is there any solution for the problem?













Solved!

Go to Solution.

Answer:Y550 Lenovo recovery hidden partition visible and One Key recovery doesnt work

restart your computer and try again or copying the disks using nero may help.there are ways to activate hidden partition but not suggested.

9 more replies
Relevance 77.08%

Hi everyone,

I recently purchased a Dell Windows RT tablet from someone. It had the problem of not starting anymore. I managed to get my hands on a Windows RT 8.0 Recovery USB Image for this type of tablet. I used a Imaging tool to install this image on a USB drive.
I booted with this and I could access the Advanced recovery options. I started the Command Prompt and launched Diskpart. I saw all of the partitions where gone. So I used Diskpart to re-install all of the partitions using the Microsoft standard.
It looks like this:

convert gpt
create partition primary size=450
set id=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
gpt attributes=0x8000000000000001
format quick fs=ntfs label="Windows RE tools"
assign letter=T
create partition efi size=200
format quick fs=fat32 label="System"
assign letter=S
create partition msr size=128
create partition primary
shrink minimum=4200
gpt attributes=0x0000000000000000
format quick fs=ntfs label="Windows"
assign letter=W
create partition primary
set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
gpt attributes=0x8000000000000001
format quick fs=ntfs label="Recovery image"
assign letter=R
rescan
exit 

All went well. After recreating the partitions, I used DISM to deploy the *.wim image on the USB drive to the Windows partition and installed the bootloader afterwards. The tablet was fixed after this :) I installed Windows RT 8.0 and updated to Windows
8.1... Read more

More replies
Relevance 77.08%

I bought lenovo thinkpad X230 in January 2013. I made a recovery USB on a 16 GB pendrive. I bought a windows 8 pro upgrade offer as well. But i did not install it at that time and kept it for future use.  About a week ago I installed windwos 8 on my system in dual boot mode making a partition on primary HDD.everything went ok with only problem that my windows 8 did not activate. I was ok with that. But when i tried F11 recovery function, it was not working. So i tried factory reset through recovery USB i created earlier. It opened up and said BOOTMGR missing. Later with some research I realized that i didnt make USB active (bootable) before burning it.(Though this is ridiculous considering, tools provided must have done that. Like when you make windows bootable.) With all this(and me panicking), I tried backing up my data with image i created through R & R tool. After back up, I lost my recovery partition on HDD. And I guess i accidentally deleted System_DRV partition as well.  Though my computer is running fine. I need a bootable media. it would be great if you can provide it. Also if you can restore my comp to factory setting with recovery partition, it would be great.Please help me. Thanks in advance.













Solved!

Go to Solution.

Answer:Thinkpad X230- No recovery partition, lost System_DRV and have no recovery media

Hi, You can make bootable media (CD, USB stick or USB HDD) for using with your Factory Recovery Data USB stick.Just launch Lenovo Factory Recovery Disks app from Control Panel, deselect Data media creation, select needed Boot media type. Note you'll need less then 300 mb free space on media.

3 more replies
Relevance 77.08%

Hi!  First of all - sorry for my english. I have problem with my Lenovo G570. I make a backup DVD with system by OKR (4DVD). Then by accident i DELETED my recovery partition. When i try to boot from these DVD i get error: "The program cannot restore the system partition because its structure is incorrect ,you may have to recreate the partition to continue". My partitions looks like this: C: New installation of Windows 7 enterprise trialD: Lenovo (default partition with drivers and backup)Hidden empty partition where recovery was. What should i do now?

Answer:Lenovo G570 - I delete my recovery partition, recovery DVD doesn't work.

@meliegree,Did you make a Factory Restore disc in OKR or did you just do the backup only?If its backup only, you might need to contact Lenovo support to get a factory restore disc instead in order to get the partition fixed.

5 more replies
Relevance 77.08%

My T61's Rescue and Recovery software in WinXP can't recognise/use the Vista's ServiseV002 partition to go back to factory settings.  I tried both in the pre-boot program and the Rescue and Recovery  in windows Xp, but both of them can't get to the hidden partition to go back to factory settings. I didnt make a rescue CD before formatting the C drive. I think the hidden partition is enough for me to get a clean Vista when I want at that time but I am wrong.  Hope someone can get me an answer, thank you! BTW i am in a educational system, I can get Vista Ultimate for 7 bucks, so if I can't get the Vista from the hidden drive, I can just bought one from school. It's not the end of the world!!!

Answer:T61:Rescue and Recovery in Winxp can't recognise/use the Vista's hidden recovery partition

anyone can help?

3 more replies
Relevance 77.08%

I installed Ubuntu GNU/Linux in my 3000 N100 0768GZQ laptop and deleted the partition in which i had installed Vista using fdisk. However, fdisk also deleted the Lenovo rescue and recovery partition. Not realizing this i created 2 new partitions in the free space. Now I want to install Vista in one of these partitions and I don't have a Lenovo Rescue and Recovery drive or the recovery CDs. Please help me.

Answer:Lost Lenovo Rescue and recovery partition in 3000 N100 0768GZQ have no recovery disks, please help

You can either get a hold of Vista installation disks and install it manually, or call Lenovo support and ask for recovery disks. They may charge you for the disks as you are supposed to create your own recovery disks.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

1 more replies
Relevance 76.67%

I will try to be as precise as possible and give as much info as I can, but I'm not sure what info is inconsequential and what isn't at this point. But, here goes...

For 2 weeks I have tried to outsmart whoever it is that has had complete remote access to my laptop but changing as many admin permissions and incoming/outgoing connections that I could find to keep them out.

A couple of days ago, I did a system restore to factory settings, thinking this would do it. It didn't; he was still there. He locked me out of all admin tools yesterday.

I have a system recovery disc made about a year ago, and put that in my CD drive tonight, thinking I could completely reformat the drive and wipe him out. However, at start-up, I pushed F2 and came up with a screen that said something about running the disc from E drive (I apologize for not be able to give you specific language but I never thought it would get this far with no progress). However, under the line showing the drive it was booting from, there was another line that started "DETECTHAL /REDIRECT " then went on to say something about "redirect name" and redirect path", none of which sounded legit to me. And considering that this intruder had created so many other fake error/info msgs already, I didn't want to take the chance of this being something else that he had stuck in there.

I backed out of that reboot and restarted. I've subequently tried to restart over a dozen times from the CD, bu... Read more

Answer:HP Pavilion Recovery error and inability to get past HP recovery manager

It sounds to me like you have malware. I suggest running malwarebytes.

4 more replies
Relevance 76.67%

Will Vista Recovery Disk Work if there is No Recovery Partition?
Thanks all.
 

Answer:Solved: Will Vista Recovery Disk Work w/ No Recovery Partition?

8 more replies
Relevance 76.67%

Talk about confusing. Does anyone know how to get a Toshiba C660 working after the HDD has failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will the recovery disk ( if you purchase one from Toshiba ) rebuild the new HDD along with a new recovery partition and install windows 7 (original OS ) and accept the product key printed on the Windows License attached to the base of the laptop. I have read a number of suggestions but these have been deemed incorrect by others.

Surely Toshiba must have a way of sorting this problem.

Do they read these posts ?

Answer:Satellite L660-12Q - Would recovery disk rebuild the new HDD along with a new recovery partition

Hi buddy?

I don?t think that this is really complicated? I could find all info regarding the recovery procedure in the user manual?

The recovery disk has to be created at the first day of purchase? its recommended to create one in cases something would be wrong with the HDD.

The recovery disk contain an image?. Image is a package containing Win system, drivers, tools and all the stuff preinstalled on the notebook.
You purchased the notebook and the system was already activated so you don?t need the key placed at the bottom of the unit.
Furthermore the usage of recovery disk formats the whole HDD (partitions too) and set the notebook back to the same state like at the first day of purchase.

There is also another option to recover the notebook called HDD recovery. This HDD recovery does not need recovery disk. Usage of HDD recovery would format ONLY the C (system) partition.

2 more replies
Relevance 76.67%

I just purchased a brand new laptop and have realised that it didn't come with a recovery disc or a recovery partition on the hard drive.

Just wondering if my hard disc crashes how am i supposed to reinstall windows?
The laptop i bought is a Toshiba satellite L500 and is only a few weeks old.

If anyone could help on the subject would be very much appreciated.

Answer:Satellite L500 - No recovery disc or recovery partition - How to reinstall?

Hi

Normally if I buy a new notebook or other product I read the user manual firstly. So I would recommend that you should the same before you ask different questions.

The point is that you have to create a Toshiba recovery disk yourself. Therefore start the recovery disk creator that is preinstalled on your notebook and follow the screen instructions. I recommend a high quality DVD-R medium to create this disk.

Furthermore you can reinstall Windows using the HDD recovery option. On the second partition you can find this folder that contains an image of factory settings and you can start this feature if you go in advanced boot menu and select ?repair my computer?. This is not a special partition, only a folder where the image is stored.

HDD recovery procedure is the same as Toshiba recovery disk. You get back factory settings too but the recovery disk wipes the whole HDD. The HDD recovery only the first partition.

By the way: Normally you did get this message:
+Important INFORMATION+

+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+

+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
... Read more

2 more replies
Relevance 76.67%

Hi,

I have already found quite some discussions around the question how to increase free space on the SSD.

Is it a feasible option to remove the recovery partition after having created a USB recovery stick with "Toshiba Create Recovery Media" tool?
Any risk?

If it would be feasible, how can it be done to assign the gained space to the C: partition?

Thanks in advance for your advice!

Answer:Portege Z830: Creating USB recovery and remove recovery partition on SSD?

> Is it a feasible option to remove the recovery partition after having created a USB recovery stick with "Toshiba Create Recovery Media" tool?
>Any risk?

Well, the recovery partition would be created again while notebook recovery procedure using the Recovery disk or recovery flash memory stick?

So if you want to delete the 2nd partition, you should create such recovery disk/USB stick before changing something on the HDD.

2 more replies
Relevance 76.67%

Hello!I just bought a Lenovo IdeaPad with a windows 7 32 bit version. There was no system disk added. I learned that the windows 7 version is hidden in a recovery partition. I now want to create a system disk to save the windows 7 32 bit version just in case and install a windows 7 ultimate 64 bit version on the computer. Can you tell me what I have to do? Thank you!

Answer:How to create a recovery system disk from the hidden recovery partition?

Hi and welcome,
One way is to save a recover set ... with OKR ... or better do this Backup before  ...but no way to get a  pure Windows 7 Install Disc if you mention this  ...  
 
And Windows 7 64 Bit will not run on Atom based machine.. i.e. S10/S10e/S10-2 ,S12 Intel/Nvidia ...
(and even when, it lacks of memory 2GB (due the intel chipset restrictions) is good for 32 Bit based systems, but not really enough for 64 Bit based systems, so there is no benefit for use a 64bit on a netbook)  
S10-3t W7 64 ?
 
sincerely KalvinKlein 
-------------------------------------------------- -------------------------------------------------- --
Want more ? For further information to get the most of your S-Class machine 
Lenovo Energymanagement Backup  Windows 7 Driver Windows 7  Install
XP Startup  Small WebCam Guide  Lenovo Easy Capture    Clean XP Install
Resolution > 1024 x 576 / 600  Works with XP Only Try this for a Windows 7 Solution 

1 more replies
Relevance 76.67%

Hi, I have a Lenovo 3000 N200 running Windows XP. Windows XP crashed beyond repair and I need to do a system restore. I do not have any Recovery CD's. I am told to press the "Lenovo Care" button. This gives me various options and option 3 is to press F11 to diagnose hardware or recover your system. If I select this, it is ignored and trys to boot Windows - obviously to no avail. I have checked the hard drive. I have run a disk test and all is fine. I have also connected it to another computer and can see the various partitions including the recovery. I have also been able to remove important data and back this up. I am therefore happy the hard disk is fine and the recovery partition is in place. Is there any way of getting the system restore to kick in? All help very much appreciated! Mark

More replies
Relevance 76.67%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 76.67%

Hello, I don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact. Thank you for your time. Regards













Solved!

Go to Solution.

Answer:Create Recovery Media/Do Factory Resect without Recovery Partition

To reset your PCSwipe in from the right edge of the screen, tap Settings, then tap Change PC settings.(If you're using a mouse, point to the top-right corner of the screen, move the mouse pointer down, click Settings, then click Change PC settings.)Tap or click Update and recovery, then tap or click Recovery.Under Remove everything and reinstall Windows, tap or click Get started.Follow the instructions on the screen.NoteYou'll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely.
 
 
Refreshing your PC without affecting your files

If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Note
If you upgraded your PC from Windows 8 to Windows 8.1 and your PC has a Windows 8 recovery partition, refreshing your PC will restore Windows 8. You?ll need to upgrade to Windows 8.1 after the refresh has finished.


Warning
Applications you?ve installed from websites and DVDs will be removed. Applications that came with your PC and apps you've installed from the Windows Store will be reinstalled. Windows puts a list of removed applications on your desktop after refreshing your PC.


To refresh your PC

Swip... Read more

2 more replies
Relevance 76.67%

I am working on my sisters Toshiba L655d-S5055 notebook. windows 7, 3gb, amd v120 processor, 250gb drive. Started with error msg at boot "encountered a problem communicating with a device at startup......". Couldn't get by this error. took out drive, inserted into usb-enclosure, and tested. numerous sector errors. She has also lost the recovery disks I made for her. I used partition software to scan just the recovery partition, and there are no errors reported there. What I would like to do, is to copy to a flash drive, or make new recovery dvd's from this recovery partition; then I can use the coa from the back of the notebook (if necessary) for full install onto a new hard drive. However, I can't use the toshiba notebook for this; I can only use my desktop pc for the xfer; using the toshiba hard drive as a usb external drive, and the toshiba media creator software will not install onto my desktop pc (doesn't give me a reason). I would prefer to go the dvd-route, but flash drive would be ok, too. Any info is appreciated. thanks.
 

Answer:how to create recovery dvd's from recovery partition mounted as usb-external drive

9 more replies
Relevance 76.67%

Product Name and Operating system: DV6 21124el (windows 7 ultimate 32bit)
Hi,
I have this laptop for the last 3 years and never used the recovery option as I didn't need to, the recovery partition is there never been formated, now my windows is too slow and wanted to restore it to factory install settings but when i press the F11 button in the start to boot in to recover mode it just take me to windows boot screen without giving an error, I did some research and found out that i have to make the recovery partition as active partition but the problem is that i couldn't do it as there is no such option to make the partition active in WINDOWS DISK MANEGEMENT and couldn't see the recovery partition in DISK PART (in windows).
images will be attatched if needed actually there was no error so that's why I didn't upload any image.

thanks in advance hoping i will get a reply here.

Answer:Recovery not working and couldn't able tomake recovery partition activ

100+ views and no reply ... seems like an over rated windows forum

2 more replies
Relevance 76.67%

I accidentally formatted the recovery partition and now I can't make a recovery disc. Can someone please help me? I also have an original windows 7 disc and how could i get back the lenovo stuff back on it?
 
 
 
 
 
Edited subject to match post.

Answer:Accidentally formatted the recovery partition and I can't make recovery disk

That sucks, and you have tons of options including heroic tasks such as undelete tools that may or not work reliably.You may also feed your machine type and model number into the support.lenovo.com website and navigate to a list of the latest and even oldest stable drivers and software for your system.Regaining the exact functionality of booting to the recovery partition isn't regained from downloading those drivers.If you're insistent on restoring the same reboot/recovery functionality then you should consider contacting Lenovo support to determine your options, I'm not qualified nor presumptuous enough to mention whether or not a fee is involved for materials.





Signature:Let us know what happened,and share your solutions so others may benefit from our experiences. "It doesn't really matter what kind of computers I own since right now the conversation is about the problems on the computers that YOU OWN!" -Mark Twain

7 more replies
Relevance 76.67%

When I push the Q: recovery drive> Create recovery media, I get a message saying "Windows cannot find 'C:\Program Files (x86)\Lenovo\factory recovery\recovburncd.exe'. Make sure you types the name correctly, and then try again."How do I go about fixing this and creating a recovery disk?

More replies
Relevance 76.67%

After I did a clean install of Win10 about a year ago, I created a USB Recovery Drive. I also have a Norton Security Recovery Drive and I?ve created USB Bootable PE Rescue Disk by Kyhi. I also use Acronis to create regular full disk images and I have a USB Bootable Acronis Rescue Drive.

With the USB Recovery Drive and the USB Bootable PE Rescue Disk by Kyhi, do I still need to keep the Recovery Partition that Win10 created when I did the original install? Are the files in that partition used by the system to create the USB Recovery Drive?

Also out of curiosity I executed the ?reagentc/info? command and I see that the Windows RE status is disabled. Did creating the USB Recovery Drive do that or is something else going on? If I keep the recovery partition then do I need to re-enable it and if so how do I do that?

Answer:Recovery Drive vs Recovery Partition vs PE Rescue Disk, confused.

Hi, you don't need the manufacturer's recovery partition unless you planned to restore the PC to as bought e.g. to sell it on.
You could create a disk image of it and save it on an external disk, then delete it from your PC.

Windows RE: Suggests you have a corrupt or missing partition - System Reserved. Note that Disk Management does not show this 16Mb partition. You need a 3rd party partition manager to see it.

See this (lots of technical detail):
Just a moment...

And do a couple of checks to see if it really is missing.

Thread where this problem was resolved:
Can't enable Windows Recovery Environment

For interest:
Windows RE statue Disabled - Microsoft Community

9 more replies
Relevance 76.67%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 76.67%

I've got an SSD drive and obviously storage space is premium. I've got the Lenovo recovery DVDs. Is there any way to reinstall everying and prevent it from installing the recovery partition? Or is it better to delete the partition after Windows installation?

Answer:Reinstalling Windows 7 with recovery DVDs without installing recovery partition?

you can't prevent the recovery media from reinstalling the recovery partition.

4 more replies
Relevance 76.67%

Hi, everyone.I'm quite sure I found this on-line and that it's doable, but now that I need it, of course I can't find it!My computer-illiterate sister has an eMachines Windows Vista computer that will no longer boot either normally or in safe mode; it hangs on crcdisk.sys.  She didn't make recovery disks when she got the computer, and the recovery console that comes up when it tries to boot also hangs.  She believes that it was interrupted while running a Windows update, but she's not entirely certain about that.  Anyway, her primary concern was recovering her pictures and documents, and I was able to do that by booting off a bootable Ubuntu CD.   Thus she now has everything she needs from that computer.  Before we take the sledgehammer to it, I want to fiddle with it and see whether I can get it booting into Windows off of the hard drive again so she can use it again, even if only for going on-line and not for saving precious stuff.I thought I read somewhere that if the recovery partition was readable (as it -- and the rest of the hard drive -- seem to be) that you could copy it up onto an external hard drive, then create recovery CD's on a different computer, but I can no longer find the instructions on how to do that.  Is that do-able, and if so, can I do it on an XP computer, or do I need to use a Win7 computer (I don't have a Vista computer).  Can I do it right off of the external hard drive, or d... Read more

More replies
Relevance 76.67%

Hi everyone,

I'm stuck in a pretty bad situation right now and I have no idea about how to help myself..So recently I've been wanting to 'reset' my Windows 8.1 laptop, & I just cannot because my recovery environment is missing..
First when I got this problem I thought there would be an easy-intermediate level fix like every other problem. (and I love fixing stuff.)

But this one doesn't look like an easy fix or I'm not even sure If there is a fix. So the big mistake I did was, I deleted my "System Recovery Partition".

I have searched everywhere possible and I'm not getting a fix.. I would really appreciate IF YOU GUYS HELP ME!
and another problem is that I don't live in the USA or Canada.I've got a Dell Inspiron 15R 5521, 8GB RAM, intel i5 3317u.

and Dell provides Backup Media to only the people who live in the US and Canada. Please guys, I need a solution.

I have a separate Windows 8.1 Installation Disk, but what I'm scared about is If I install my Windows from the disk, my Dell features would be gone and I don't think I'd be able to have a proper Recovery Environment in the future because this Disk's installation files are nothing related to Dell. Its just a clean Windows installation disk I got from my friend a while ago. I've tried the repair my computer option from the disk and it does not help...

Thank you

Answer:Recovery Environment Missing -System Recovery Partition Deleted.

Hi ahmedrahamathulla,
Please private message us the system service tag and region you are located so that I can check the available options and assist you further. To send a private message, click on my name and send private message.

2 more replies
Relevance 76.67%

** VIRTUAL RANK NEWBIE TO "OLDER" THINKPADS **My 'friend' gave me his R50e (1842-STU) to "fix" after he attempted to re-load Windows XP... Lord knows what he did - or why - but this is what I've got:I'd like to simply use the recovery partition to 'return to factory' - but I am not given that option when I press the blue 'Access IBM' button during bootup.  All I have are options to hit 'ESC' to resume normal boot - F1 to enter IBM BIOS  Setup utility - F12 to choose a temporary boot device.I've removed the HDD and connected to my Win 7 PC using a USB >IDE 'service interface' and I see what I believe is the 'service' and 'recovery' partition (brilliant that they named it "SERVICE") but how can I implement this to recover to factory?When I boot the PC, I'm presented with options to boot into one of his 'failed' XP installations OR into PC-DOS.If I choose the PC-DOS, I am presented with a single menu option:"1. Thinkpad T4x/R5x"but when I choose this, I get an immediate "File not found: 'C: \Command .com" with secondary messages saying:   2   *--*       "PLNRID.EXE                +++  RC(8)  That is the wrong diskette for this Thinkpad.  Please insert the correct diskette   22   *--*    "{ATI_CTYP.EXE"  ;    &n... Read more

Answer:R50e - No recovery capacity / seemingly valid recovery partition

http://thinkpadrecoverycds.com/rseries.html
 
Hi billzinn and welcome to the Community,
 
I think the key phrase here is, "after he attempted to re-load Windows XP".  
 
It doesn't take much to mess up the recovery partition.
The easy way to straighten it out is to get yourself a set of restore discs and reinstall the os.
You can try to get them from service, link below, or get them from a supplier, link above.  I've gotten a few sets from the above over the years.
 
Dave
 
 
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-4M7HWZ#purchase
 
 
 
 
 

1 more replies
Relevance 76.26%

I have an HP laptop that came with windows 8.1 pre-installed. I have installed several programs and and several changes ever since
I have been offered the official windows 10 upgrade (from Windows Update)
Assuming I install this I would like to understand
1) Can I rollback to windows 8.1 if I wish to? How?
2) Will the HP Recovery Manager work? and if used will I get a recovery back to Factory settings or back to my state as it existed before installing Windows 10 ?
3) What happens to the original recovery partition?
4) Will another recovery partition be created in the process of upgrading to windows 10?
Thank you all for any help on these issues

Answer:Recovery after installing Windows 10, will the recovery manager work?

1. Yes you can roll back to 8.1
Go to Settings, Update & Security, Recovery and there choose 'Go back to your previous version of Windows'.
2. Yes it will work, and I believe you will be brought back to previous state, not the Factory settings.
3. I believe it stays intact
4. Yes

2 more replies
Relevance 76.26%

I am on Windows 10, and for the past couple months I have had booting/BSOD errors that usually give me "bad_system_config_info" and occasionally, "0xc000021a ". Sometimes, I have been able to boot in by accessing the UEFI settings, other times it seems like it just randomly decides to let me log in to my computer normally. When I am able to login, I check for viruses and I haven't found any, as well as run commands like "sfc/scannow", "chkdsk", or "bootsect".  I am trying to recreate recovery media via the HP Recovery Manager, but each time I insert the empty flashdrive, the Recovery Manager suddenly crashes. Please, any response to these combined issues would be greatly appreciated, I haven't been able to use this laptop regularly for months now.

More replies
Relevance 76.26%

Hi All and Pros, appreciate your help. Just bought a new Windows 10 HP AIO. model: 27-a275d.Only started use it for 1 week, and tried creating a recovery media.however the HP  Recovery Manager keeps hang on me. (see attached print screen). apprecaite if someone or HP can really help and advise - how do i still create my recovery media. thanks  

Answer:Trouble Creating "Recovery Media" on HP Recovery Manager - W...

Let me ask to have your issue escalated.  You certainly can't create recovery media if the Recovery Manager or the Windows OS is broken.

2 more replies
Relevance 76.26%

Good afternoon! Tell me, please, how to get HP Recovery Manager software with recovery discs from HP? For laptop probook 6465b. Thanks in advance. 

More replies
Relevance 76.26%

I am running windows 7 on my laptop. I has windows vista before the upgrade. I had recovery discs for windows vista created from the recovery manager. I tried to make discs for windows 7. I would like to know why it won't let me make a disc for windows 7 because if I had trouble and needed to put in the recovery discs I wouldn't want to use the ones i had for windows vista. what should i do? here are screenshots to show what happens when i try to create the discs for windows 7.

Answer:Problem w/ creating recovery disc in Recovery Manager

HP PC Recovery Disc Creator, is for your HP Vista only, not for UpGrade of Win 7.

Try this:

Backup Complete Computer - Create an Image Backup

7 more replies
Relevance 76.26%

If I abandon my efforts to install the latest Windows 10 update, would it be a feasible and a good choice for me to command HP Recovery Manager to make the "Minimized Image Recovery" to the factory condition of OS (Windows 7 Home Edition) with drivers and select software?  I have used HP Recovery Mgr to backup my files on an external hard drive.  Next question: How do I restore those files to my computer?  Should the restoration be done in Windows 7 or after I install Windows 10 on my computer?

More replies
Relevance 75.85%

I have a Compaq Presario CQ62 417NR having problems. It was bought used and at some point started having  cd-drive malfunctions where it no longer detected hardware and the drive didn't work. I reloaded completely from the recovery partition, it worked fine several days and I was able to install office but after that it stopped working again. I have tried an external usb cd drive but that doesn't work either. At this point, I'm thinking it has driver issues from the recovery and I'd need to buy the disk from HP but I'd like a second opinion as they are not free.
 
Does anyone have an idea of what the problem is? I've never had this happen on a fresh install...

Answer:Driver issues on fresh HP recovery from recovery partition

could you check on device manager does any yellow or red exclamation?

5 more replies
Relevance 75.85%

Hi folks - I've just had a frustrating moment trying to make a Recovery Media set on my new T450.  I followed the prompts using Lenovo's "Factory Recovery Discs" program.  When prompted, I inserted a USB drive, expecting the program to tell me at some point what capacity was needed, but it never did.  So after only one or two quick optionless prompts, it began creating the media on the USB.  Quickly it stopped, and gave a message saying that the capacity of the drive was insufficient (while still not saying what size was necessary), and gave me only one option:  Delete Recovery Partition and restore drive to normal functionality - or something very close to that wording.  So I clicked OK, assuming it was referring to the USB drive - because why would a user want to delete the factory Recovery Partition at this point?  But that's exactly what it did.So now I have no Recovery Partition (formerly the Q: drive), and I can't tell if that space is still allocated (but unavailable to me), but I suspect that's the case.  I've attached below, a screenshot of what I see in Drive Management now.I'm frustrated that with one click on a poorly-worded message, in the process of creating Recovery Media, I was given the option (and only the option), to delete the Recovery Partition itself!  Mind-smoking. Any options for restoring that data, short of sending my new PC back to Newegg or Lenovo?  I suspect it's only logically deleted, (if I ... Read more

More replies
Relevance 75.85%

COULD NOT FIND RECOVERY ENVIRONMENT
(I know it's a redundant thread but I think I'm having a different scenario)
Specs: (nothing's changed except I did reinstall win8.1)
- win8.1 x64 single languange
- 1TB HDD
■THE SCENARIO■
There was a time when I want to resize my drive C to smaller partition:
I used Easus Partion Manager to do so (to dumb I was). After rebooting my system could not start
The BSOD showed up:
RECOVERY
PC needs repair (blah3x)
Error code: 0x000225
I was able to manage to repair and I came back up fine using a tutorial in youtube
using bcdboot C:\Windows /s (any drive letter): /s uefi
At this point, I downloaded a new copy of windows8.1 SL, thru "mediacreationtool" (as a legit copy i suppose)
and then I reinstalled using the ISO from MS, now I'm totally OK, at least at the moment.

■THE ISSUE■
Seems like everything's working as it is now, but as soon as I try to press F9 upon boot up, same error popup
Error Code: 0x000225, and again I got used to doing the bcdboot method.
NOW, this "Restore" partition the size of 20GB, and appeared and it had something in it (some files I think).

This wasn't there before and after reinstallation of win8.1 SL. IT ONLY appeared when I pressed F9 then I repaired
it using bcdboot.

■MISSION IMPOSSIBLE■
If there's a way that I could restore my notebook pc back to day one: Or am i that close? (close enough)
If this could be fixed? I know its risky but I will take it as a n... Read more

Answer:Unable to fix recovery partition ASUS / Lost recovery

So Im not entirely certain on what you are asking here. Your computer is unusable right now, or you cant get the recovery partition to work correctly?

10 more replies
Relevance 75.85%

I am trying to set up my Zbook 15 G2It is a refurbished model with set up warranty til 8/23/16.I just got it & it was upgraded to win 10 (1511).There was no recovery partition on the hardrive. I upgraded to the win 10 aniversary edition (1607) & have been updating software/drivers as per HP support suggestions. It was recommended to create a system recovery thru a HP support message which I attempted to do but there was an error & it failed which led to a empty recovery partition being made on the harddrive. Here is the summary & details..I am trying to delete this empty recovery partition but right clicking in disk management is not giving me anything. Can someone please advise a solution... Tried to create System Recovery as suggested by HP support (Launch recovery media creation tool) & it attempted to make a recovery disc & partitioned the hard drive.The recovery failed (error 1AstorA.sys System Thread Exception not handled) & a empty recovery partition was made. I am trying to delete this partition & gain back the 784 MB space. This entry was made in $PBR_Diskpart Notepad same day rem == ResetPartitions-BIOS.txt ==convert mbrrem == 1. System partition =========================create partition primary size=100format quick fs=ntfs label="System"assign letter="S"activerem == 2. Windows partition ========================rem == a. Create the Windows partition ==========create partition primaryrem == b. Create space... Read more

More replies
Relevance 75.85%

After installing clean Win7 I am unable to recover to factory although my recovery partition is fine. I presume I should fix the original MBR (Intel SSD 160)? How can I reenable full factory recovery? ThinkVantage button and F11 work perfectly, but on the last step (FINISH button) the system says "recovery has been removed from this machine".   Of course, if it's possible to get a registry/system patch/config file/services layout instructions or something from the original burned-in installation so to copy it's batter performance, I'd love to have  a link   Thank you.













Solved!

Go to Solution.

Answer:X220 full recovery not possible, recovery partition intact

Hi and welcome to the forum!
 
Check this out:-
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013955
 
"This package does not support Rescue and Recovery version 4.3 which is for Windows 7 operating system. If you encounter the problem in Windows 7, please re-install Rescue and Recovery 4.3. It could also re-enable the F11 function."
 
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4Q2QAK
It might or might not work, you can use the recovery media you created in any case.
 
Hope this helps.
 





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

7 more replies
Relevance 75.85%

Since I deleted all drives, including the 24GB recover drive, I need to restore this configuration, please direct me to an application download that I can use for this. Would have to restore the OKR functionality. The reason I deleted this was that when installing Windows 8.1 it kept listing both drives (the 24GB and the HDD) as installable drives, and wanted to default to drive 0 (24GBFlash) instead of drive 1 (HDD). In Windows logic, a OS should be installed on the 0 drive (or the drive connected to the first available sata/ide connection). If you also have an updated version of OKR for Windows 8.1 I would rather have that thankyou, I have my own 8.1 license. I have seen some answers directing us to sending in the laptop to lenovo for this. I refuse to do that.  

Answer:Need to restore recovery partition and Onekey Recovery. [Y510p]

For DIY: It is possible to recreate the partitions but it will be difficult to make OKR function without a copy of the okr backup image. Also you may have misinterpreted the ssd cache as the recovery drive. So before starting to implement your plan be sure you have the correct information. Its not really as easy as you think so be careful. So without the okr image backup, your only choice is what everybody is telling you all along: send your unit to Lenovo. They're the only who can put back your system to factory default.

4 more replies
Relevance 75.85%

Hi, I am trying to create a recovery drive on a new ThinkPad Yoga 15, but that is failing because the recovery partition seems to be empty. - Computer Management > Storage > Disk Management shows 3 hidden partitions. All three are 100% free (empty). - Control Panel > Recovery > Create a Recovery Drive throws error "We can't create a recovery drive on this PC. Some required files are missing. [...] use your Windows installation disc or media." - The laptop shipped without any installation disc or media. - Running >reagentc.exe /info throws "Operation failed: 3. An error has occured". - Running >sfc /scannow results in "Windows Resource Protection did not find any integrity violations". Where are the recovery files, and how can I create a recovery drive on this system? Thanks.

Answer:Recovery Partition Empty & Can't Create Recovery Drive

The better part of a month later and still no reply from Lenovo Support? I would appreciate a response. I paid a lot of money for a device that does not work as advertised. Thanks.

2 more replies
Relevance 75.85%

Hi,
 
I have a Z585 and created a onekey backup on an external harrdrive. The problem is, I accidentally deleted the onekey recovery partition. How do I get my system back from there?
 
Thanks
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

Answer:Z585 - Onekey recovery with backup but without recovery partition

uff. You might want to obtain a recovery DVD from Lenovo support. Once you successfully factory restored your laptop with it, you can hopefully use OKR once again for backup.

2 more replies
Relevance 75.85%

If I use the recovery disks (3) and the driver and application disk to re-install Windows 7 on my Acer Aspire 7740-5691 will the recovery partition be restored. The recovery partition is 11.72 GB and is 100% free space and healthy according to information in disk management. I am not sure how the recovery partition got wiped but the computer is up and running at this time. The disks were made when I purchased this computer about 5 years ago. The hard drive is 320 GB, processor is intel i3 quad core, ram is 4GB. Thank you in advance for your comments and information. Oscar1













Solved!

Go to Solution.

Answer:Do Recovery Disks restore Recovery Partition, Aspi...

Acer erecovery media will restore your laptop to factory default, so, yes it will restore the original recovery partition too.

4 more replies
Relevance 75.85%

Microsoft state After you install Windows 8.1, you won't be able to use the recovery partition on your PC to go back to your previous version of Windows. How do I make a recovery media, disk or USB for my G505S  ??

Answer:G505s Recovery Windows 8.1, destroys recovery partition

I should make it clear I want to make a recovery usb for Windows 8 before I upgrade

1 more replies
Relevance 75.85%

Dear All. My T440s no longer has the recovery partition.I'm with Win 8.1 Pro, but I would like to restore the system. How can I do to restore and create a new Recovery Partition? Thanks,Lucas Mendes  

More replies
Relevance 75.85%

I have a customer's NB200 on the bench. It came in with complete OS failure and would not boot from either the OS partition or the Recovery Partition.

I have checked the Hard Disk and it is in perfect working order. However it seems that all is not well as I cannot get it to boot from the recovery partition even after holding doen the 0 key.

I tried to instruct it to start from the BOOT.INI file by pointing a 'revoery' option at the partition but it just comes up with an error saying <Windows Path>\system32\HAL file is either missing or corrupt. Does anyone know how I should instruct the partition to start or how I could extract the information from the image files?

Answer:NB200-10G Recovery Partition - Cannot start recovery process

If you check page 48 in user?s manuals you will find exact description how to start recovery installation. The procedure on this NB200 is same or, at least, similar to all notebooks delivered with HDD recovery image. Please check it.

Useful document about HDD recovery installation you can find in ?How to..? category > http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58

Bye

2 more replies
Relevance 75.85%

I was creating recovery disk from recovery partition on my Lenovo T400 with Windows 7. 6.5 GB of the recovery partition has been occupied.But in the process, I created three DVDs. I might remember wrong, but the first two DVDs were called by the wizard as disk 1, and the third one was called disk 2.The first one has been written 0.22 GB only. Following is the content of the DVD (right click the image and select view the image in a bigger size):
 
Link to picture
The second one has been written 3.97 GB as follows:
 
Link to picture
The third one has been written 2.44 GB as follows:
 
Link to pictureI am allowed only one time to create recovery disk. So I was wondering if I missed something? How is the creation process supposed to be like? Thanks and regards!
 
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
 

Answer:Have I created the recovery disk from recovery partition correctly?

Looks okay to me. In the past, after I created a recovery disk set once I have the new laptop.I would use the Roxio software or any similar software to create ISO image of the 3 discs, and store these in a network drive or 2nd harddisk. Then I would reboot and use thinkvantage to factory restore the laptop (takes about <15 minutes now if window 7), this will restore the capability to create recovery disc again, and then I can burn another set of recovery disks. The reason I have 2 or more sets is because one time I had an issue with my T61 a long time ago and when using the recovery disk discovered that the 2nd disk is bad. From that i learn my lessons and have multiple backup in case the media was scratched, wrap under heat or i accidentally erase/overwrite my DVDRW. One of the disk out of the 3 is normally the bootup disk which you can use a CDRW disc, the other 2 is quick large in file size and DVD discs are needed.

4 more replies
Relevance 75.85%

Hello everyone,

I'm a technician at TigerDirect, and for one of our services we create recovery media for newly purchased machines.

For Windows 8 machines (As I'm sure you know) we cannot create recovery disks, and have to create a recovery drive using a flash drive.

On multiple occasions I have attempted to create the recovery drive using a CENTON 16gb USB stick and have selected the option to copy the recovery partition. The process proceeds normally until it starts copying the recovery partition. It will complete ~75-90% of the copy, and then all drive activity will stop. The unit still works perfectly fine, but the flash drive is not indicating any read/write, and it stays on whatever percentage it stopped on continuously with no change.

I'm curious if anyone else has run into this before? The current machine I'm working on is an ASUS G55V running Windows 8 (not Pro). The other machines we've had the same issues with have been multiple different ASUS models, as well as a few Toshiba's and HPs.

Any help is appreciated, thank you.
-- fragment

Answer:Cannot copy recovery partition -- win8 recovery creation

Welcome to EightForums.

Try setting the HD Drive to never turn OFF.

30 more replies
Relevance 75.85%

i tried to use the recovery wizard on my SONY VAIO VGN-A250 Laptop and the error messaged i receieved was "VAIO Recovery Wizard cannot find recovery partition" please restart computer. I restarted many times and still get the same message. I also have used the F10 key method and no luck. It wont even open the wizard. I am able to boot. Im out fo warranty and tight on cash and really need my laptop to work fast. Want to remove all from the pc so i can use for school. Please i saw a thread about same problem i had but the thread was closed. if anyone can help please do so.

Thanks
 

Answer:VAIO Recovery Wizard cannot find recovery partition??

16 more replies
Relevance 75.85%

Dear all,

I delete all data in C:\ drive and I do a format c:\

I don't create a Recovery CD, and now I can't restore with F8, but I show that I have a recovery partition on D:\ drive.

Please, how can I restore it ?

Thanks in advance for your help.

Best regards,

TOSHIBA C670

Answer:Satellite C670 - formatted C:\ and no Recovery CD but recovery partition

Hi

Maybe this thread about a similar theme would be useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53952

If this is not helpful or if you will not be able to recover the notebook using the method mentioned there, then you will need to order the recover disk from here:
http://backupmedia.toshiba.eu/landing.aspx

3 more replies
Relevance 75.85%

Hello all, I'm new here. I bought a Lenovo G50-70 at the end of 2014. I want to create a recovery media of my RECOVERY PARTITION. Ok I have Lenovo OneKey Recovery App v8 but with that application I can't create a recovery media of my recovery partition, I can ONLY create a recovery of my current partition (in this case: C: ). I don't want that my current partition has 119 GB. My recovery partition has 15GB, my question is: How can I access there to record it in a USB, DVD or my PC? Thanks in advance.

Answer:Lenovo G50-70 create a recovery media (of recovery partition)

macrium reflect





find joy.

7 more replies
Relevance 75.85%

 I have gone to restore my laptop to Factory setting but in the rescue and recovery application i do not have any option to recover to the laptop as it came out the factory. When i got the laptop i created rescue media and have a set of 4 disks, All DVD(2 are 8.5GB). The R&R  boots and asks for the Final C disk. None of the disks display in the backup listbox. Before i went for a fresh install using a Windows 7 disk, i got R&R to off load media to a portable drive. This will boot to a different version of R&R similar to the post 2008 walkthrough. But the screen i get does not have the radio button for Factory restore, just the backup and when i put my DVD's in, no backup is found from the media i have... I removed the factory partition after i created the media as i presumed i could get back to the factory using them. My fresh install of windows 7 works but downloading the wireless driver from Lenovo doesn't activate... wish i never started to mess with it now.... Any suggestions???













Solved!

Go to Solution.

Answer:Edge 525 & Rescue & Recovery & No recovery Partition But Disks

Update: All Restored and Working again... Must label the Disks better in the future... I had 4 disks in a bundle, the first being the Rescue repair disk, which boots to a similar screen. As 1 of my disks didn't do anything in the various rescue and recovery application i used from previous thinkpads. Turned out this was bootable and the proper rescue and recovery for my set of disks... cdrivebackup.swm took ages to load and then asked for the second disk. Processed and now 1 working system again... now to move all the data back...

1 more replies
Relevance 75.85%

I somehow dont have a recovery partition on my hard disk but have Toshiba Media creator on my desktop?

Images below:

No Recovery Partition?:



+Message was edited: not working links have been removed+

Answer:No Recovery Partition - Recovery Media Creator issue

Hi

It looks like the Recovery Media Creator Software is still installed but the HDD Recovery partition has been deleted from the HDD.

Therefore the recovery media creator cannot access the HDD recovery partition.

What to say?. In such case you will not be able to create the recovery medium :(

But you could order such disk from here:
http://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 75.85%

hp 241 g1 laptop given by rajasthan govt., india to schooler students !My son  received these laptop with pre installed genuine win 8.1 with ms office 2013 & other educational software.but we received these laptop with already removed recovery partition !!so i can't able to create recovery disk !! for this issue i contact hp support care number. but they say they have not any recovery media !!How to solved this issue ? how to make recovery disk myself if recovery partition removed? my mobile no. is : 9460410231 email : [email protected]

More replies
Relevance 74.62%

I removed some spyware and viruses from my father-in-laws computer. It works ok for a little bit, but then I will get a BSOD with the STOP 0x0000007e error. I do not have the peripherals that originally were installed on the system, as I only took the tower to work on and have my own mouse, keyboard, and monitor installed. Would this cause the problem? At any rate, I want to use the Gateway Recovery Center to do a factory system restore. When I open it up, and chose the factory restore option, it wants me to restart my computer. I chose to restart, but it doesn't do the restore. I have also asked it before to do a scandisk check on start up, but it won't do that either. I have the mini dump files from the BSOD messages, but I am just wondering if I should go ahead and take it back to his house and hook up the normal monitor and such and see if I get the BSOD then? It doesn't seem to have any particular triggers, like now I have had it on and running just fine for about 10 minutes, just trying the things that I have tried before. It is running Windows Update now, as it hasn't had any updates since March of this year.I did a System Restore and then used Spybot S&D to remove what was there. whatever it had at the time would cause the computer to go to a blank white screen after about 2 seconds on the desktop at startup. I was told that it had started with some FBI pop up that was asking them to send $450 to them to unlock their system or such. Spybot caught a trojan,... Read more

Answer:recovery from the Gateway Recovery Manager does not work

This might help:http://www.majorgeeks.com/files/det...0x0000007e seems to often relate to drivers and 0x0000008e to RAM. If there is a virus still about then you could get confusing BSOD errors.Always pop back and let us know the outcome - thanks

13 more replies
Relevance 74.62%

Hello, I am trying to completely factory reset my pc but when I select Windows Recovery Environment in HP recovery manager, it just brings me to the login screen after it restarts my computer. I have tried factory resetting using windows but I get the message 'Could not find the recovery environment.'Is it possible for me to factory reset without having to spend any money, or will I have to order a disk from HP?

More replies
Relevance 74.62%

I had deleted recovery partition because of boot mgr error. pre-installed OS: Windows 8.1 I have also ordered two sets of hp recovery disc but both shows same error (boot mgr) but yesterday I can't even open system recovery from hp recovery disc by press F11, even I try to change bios setting from secure boot to legacy boot but can't  open system recovery  What I do now?

More replies
Relevance 74.62%

I recently clean installed win 10 64-bit from 8.1 through a bootable USB which also erased RECOVERY partition & Recovery manager. Is there any way I can get Recovery manager and backup new win 10 partition. Since I currently have no backup partition. I am afraid, I may end up in boot failure and have nothing to restore current windows Thanks in advance !!

Answer:want to add HP recovery manager and a seperate RECOVERY part...

You can use a third-part solution such as one available at the Paragon Software website.https://www.paragon-software.com/ They have a free version and home and Business versions available.

4 more replies
Relevance 74.62%

This is a last resort for me. My PC failed and would no longer boot to Windows. Just kept spinning while trying to load. At this point, I decided to access Recovery Manager to do a Systom Restore back to factory settings. I know I should have created a restore point when upgrading to Windows 10, but life lesson learned. Either way, my installation failed and I'm no longer able to access Recovery Manager. I did my diligence and backed up my files to USB but it's useless since there's no operating system. I downloaded a copy of Windows 7 and burned to a disk but when booting from CD Drive, it doesn't prompt to install Windows, just says it is preparing set up for first use then an error appears saying "Windows could not complete installation. To install windows on this computer, restart the installation." I tried using my CD key on the microsoft website to try and download a copy of windows 7 but it wouldn't let me because it was a factory copy. I'm at a complete loss right now.....can't find any help with this situation and paying someone to fix this isn't an option. What am I missing here guys? Any assistance would be appreciated.

Answer:Recovery failure. Cannot access Recovery Manager

Hi @xxboramirxx I would suggest you try the troubleshooting steps given in the link below : http://support.hp.com/in-en/document/c01867418 I am an HP EmployeePlease click ?Accept as Solution? on the post that solves your issue to help others find the same solution.Click the ?Thumbs Up? to say ?Thanks? for helping!

2 more replies
Relevance 74.62%

Guys, I cant complete succesfully my system recovery. Here is an event-by-event detail (I have a DV5 Pavilion): - I Complete Recovery (Recovery is complete message appears......."Once your system restarts and you finish the inital...")- I restart- CMD.exe window appears- Software Installation HP window appears- It restarts, black window with HP Logo, then Microsoft Corporation (windows starting)- "Please wait while Windows sets up your computer" (Black screen)- Please wait WHile Windows Continues setting up your computer (light blue screen)- Restarts again- black screen, mouse pointer, windows logo appears, start sound (Welcome Screen appears.....Vista Home Premium)- Windows setup window............."Windows is now setting up the following items:Pre-PININST (Check)Preinstall Software InstallerPre-PININST2Preinstall software Installer 2ndPost PININSTAC Power CheckingBurnBoot(All this with a HP on the back screen, with the grey completation bar)-Takes long time to complete the second task (Preinstall Software Installer).- Restarts (logging off, shutting down....)- Black screen, white pointer again- Windows "Welcome" screen againNow, when it is in the "Windows is now setting up the following items:- Pre-PININST2An Recovery Manager window appears saying that "The recovery attempt has failed. Please select one of the following buttons:Details or RetryWhen I hit details, it appears the following:- ChkErrBB.CMD: Detect some error during PININST-BBV.- ChKErrBB.CMD: Check C:... Read more

Answer:Recovery Manager Problem (Recovery fails)

I found away past it. Just close the window with the "X". Don't hit retry or it will just keep starting over. The box will appear a few more times during the process, but just keep hitting X and it should go through. Worked for me! I'm not sure if there are features or files missing because of the errors, but the system seems to work fine so far.

10 more replies
Relevance 74.62%

My laptop came with Windows 8.1 64bit operating and there is a recovery partition to factory reset. It was protected by the HP recovery manager. After i update to Windows 10, reset my PC (not factory reset) with the option keep my files , so now i have a Windows 10 and i can see  in recovery partition one recovery folder and inside it one file of name "lang" in the Recovery partition rest of the files and i can't see and there isn't any virus in my laptop its just of changing settings i took the step of reset windows 10. i believe my recovery partition is save but due to un availability of recovery manager it is not protected. now i want to factory reset and by going to advance startup option i saw recovery manager ther but when i clicked to recovery manager it says can't open file "x/recovery/hp/rita-tool" . thats why i cannot proceed for factoey reset.please guide me how can i get back recovery manager or how can i make recovery media ? please help !! 

More replies
Relevance 74.62%

Hello! I'm a owner of a HP Mini 5101. It has a function to press F11 to return the system into the "out-of-the-box" state. But my problem starts here. When I press F11 I imediately get a screen that says Windows Boot manager on top and and error : 0xc000000e and required device is inaccessible. This started after I made a "clean" install with the DVD Windows 7 that came with the computer as I tried to avoid all the "crapware" that comes included with the new notebook. If I boot into Windows, the HP_RECOVERY partition is visible and the HP recovery image is on it. Is there anyway to get the F11 recovery back to working state? I have some BCD editing knowledge in that would help in any way with my problem..... Thank you very much! U











Solved!
View Solution.

Answer:F11 HP recovery doesn't boot into recovery partition

Thank you very much for getting back to me so fast.I have to apologize as I did not explain my problem in the right way. Technically I am able to boot the partition, but the problem occurs when the partition needs to boot into WinRE or WinPE I guess so that the recovery can start. The loading process gets stuck immediately at the beginning even before anything "Windows related stuff" starts loading. So about five seconds after I turn on the computer and boot into the recovery partition, or pressing F11 the error that I'm describing shows up. Update: I managed to fix my problem. After setting the recovery partition to active, and booting from the installation USB with windows 7, I managed to fix the mbr that was corrupted and the partition didn't know what to boot. So after fixing it, i had no problem running the recovery. Thank you!

10 more replies
Relevance 74.62%

Well I finished my project - the program script allows me to create MBR and GPT hard drive partitions with a recovery image partition. The script also allows me to install 3 different versions of windows. and lastly it allows me to capture a recovery (push button reset) image. which can then be used to create recovery media..


Here is the Menu Snippet:
(A) CREATE A "BIOS_MBR TYPE" PARTITION STRUCTURE
(B) CREATE A "UEFI_GPT TYPE" PARTITION STRUCTURE
(C) CAPTURE AND CREATE A "BIOS_MBR TYPE" RECOVERY
(D) CAPTURE AND CREATE A "UEFI TYPE" RECOVERY
(I) INSTALL MICROSOFT WINDOWS FROM THIS USB DRIVE
(X) QUIT THIS PROGRAM

WinPE 5.1 was the preinstallation environment use for testing

Answer:Create a Recovery Partition and Recovery Image

Good one! I always have to go back and look up the procedure and commands when doing this. Really a help for an old brain.

3 more replies
Relevance 74.62%

http://i.imgur.com/f3x5U.png
http://i.imgur.com/TZ0ZN.png

Can I get some help with this please?

Answer:Recovery doesn't detect my recovery partition

What make & Model.



   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?

8 more replies
Relevance 74.62%

I am recovering the PC using recovery manager but it shows an error "couln't find recovery partition" but my pc has recovery partition in this condition what should i Do..?i need imdiate help.....

Answer:"couln't find recovery partition" but my pc has recovery par...

Hi,What is the exact model name, product number of your laptop?Have you upgraded Windows?Have you created HP Recovery USB using HP Recovery Manager after first setup of this notebook?RegardsVisruth

3 more replies
Relevance 74.62%

yeah i was just seeing if you could make a recovery disk from the recovery partition? it wouldnt make sense to why u couldnt do it?? but how to go about it??

Answer:Could you make a Recovery Disc from Recovery Partition?

You would do that by creating an image. Then burn it to a cd.

Do you mean a XP recovery Console cd? or a whole system image?

6 more replies
Relevance 74.62%

Hi All, I have reset by T430 from the USB recovery(Windows 8) which i have created earlier. My recovery was successful, but the recovery partion was missing in the notebook harddisk and  F11 recovery option was missing in the startup menu after recovery.Please suggest me, how to restrore the recovery partion.

More replies
Relevance 74.62%

I couldn't find similar thread so I'm postin this as new. I bought T400 with Vista BU 32bit. I didn't know that It's strongly sugested to create my own recovery discs. T400 was shipped with XP recovery discs. Problem is, that I wanted to try XP, put DVDs in the notebook and after few reboots I discevered, that I have only C partition (system) and hidden partition, that I'm not able to even assign a drive letter. No recovery partition, no preload partition. I'm now on Win 7 RC 64 and soon I want to recreate recovery partition, but without my own recovery discs I dont know how.There is one solution, but I dont know if it's possible option. My friend has T500 and I told him to create recovery DVD before he did any change to partitions. From hareware side, our notebooks are almost simillar (just differend discrete VGA and CardReader).1. So do you think, that I can use his recovery DVDs to restore mine T400 to factory state and than create my own recovery DVDs?2. Why XP DVDs shipped with NB created just hidden partition (which I can't acces and I dont know how to install OS from it without working R&R partition)?3. Last question, but not important one: System came with 32bit BU system, do I have an option to reinstall it somehow to 64bit BU on the same licence number (I mean legally) because System has 4gigs of RAM. Thanks

Answer:Recovery partition not created by Recovery Discs

UP please respond, because I want soon reinstall Win 7 RC and I need to know what options i have. Thanks

1 more replies
Relevance 74.62%

I restored it back to factory and now there is no recovery partition.

How would i get that back?

Thanks

Answer:Recovered using the recovery partition and now there is no recovery partion

May I ask you how you have recovered the notebook to the factory settings?
Did you use the Toshiba Recovery disk or the HDD recovery procedure?

2 more replies
Relevance 74.62%

If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?

My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.

He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.

Answer:replace recovery partition in recovery drive?

There may be a couple problems with that. The Factory Image is too large to be just copied to a Fat32 partition, so it has to be divided in sections. You could do that using DISM and put the .swm files in the sources folder. Not even a guess as to whether it would work.

There is other information concerning the configuration of the computer making the recovery drive. If it was made on a different computer, that info would probably be incorrect and not allow a reset.

I have never tried, but you might be able to copy the Factory image to a drive formatted as NTFS and then set the recovery to look for that file for a reset. Maybe you have already copied the entire recovery partition...

If you assume the factory image is the same for both systems, can you copy the entire Recovery Image partition from the bad drive to the good drive?

5 more replies
Relevance 74.62%

Does anyone know how to create an ISO from a recovery partition? I'm looking to create a bootable flash drive to install XP on my ASUS 1005HA. (I have Windows 7 starter, but I don't want to pay the 80 bones to upgrade to the full version.) I also have an ASUS 1000HA with XP--and the corresponding recovery partition--that I'd like to use to put XP on the new netbook. Unfortunately, I don't have a USB optical drive (I'm cheap--sue me) and so I need to use the bootable flash drive.

Long story short, I know how to make the bootable flash, but I need an XP recovery ISO to load onto it to allow me to install the OS. Anybody know how I can make one from the recovery partitions?
 

Answer:Creating Recovery Disc ISO from Recovery Partition

Using a recovery image from one PC to install on another PC with different hardware is not going to work.

Besides it is illegal, we cannot help with that here, read the site rules.

Other Illegal Activities - As you might expect, we don't want anything illegal going on here. Users cannot post hacks, cracks, pirated software, or anything of the like. Furthermore, we do not allow instructions on how to complete illegal activities, such as pirating. Please don't ask for advice on using illegal software, as it will be removed.Click to expand...

http://www.techguy.org/rules.html

.
 

3 more replies
Relevance 74.62%

HI
I'm trying to re-install Windows 8 as it is not working properly, but did not make a copy of the  Dell software image when I bought my Dell XPS 8500. I can not now make a copy of the software image.
When I use Dell Backup and Recovery, it says "it can not detect the recovery partition on this computer it may be missing or corrupt. To recover your computer to the original factory state and restore the recovery partition please use your system recovery discs"
In the past I would have just re-installed the OS from the provided discs and I'm not sure what to do next. At the moment the OS is not working correctly.
Help!
ThanksPaul

Answer:Windows 8 Recovery with no OEM DVD or USB drive or recovery partition

Dell made a software called "Dell Backup and Recovery" to help it's users to backup or recover the Operating System, Factory Installed Drivers and Applications and Personal User Data like Music, Videos, Photos and documents etc. To do so, Dell creates a Hard Partition called Recovery which contains an image of the Operating System, Drivers and Factory installed 3rd party applications like Mcafee Anti Virus which are all together known as Factory Image. Dell recommends it's consumer to backup this Recovery Partition in USB Flash Drive or Multiple DVD's as soon as they Fire the PC for the first time. Now, as you mentioned that you're recovery partition is corrupt, and you don't have the Recovery Media Disc's, none of your data could be recovered. If you PC is covered under warranty, you can call Dell Technical Support and request for the Windows 8 Media Kit & License Key and can simply do a full Operating System Reinstallation. If your PC isn't covered under warranty, you might need to Purchase the Retails Version of Windows 8 Media Kit with License Key for a $100. Remember that you can't use any other Dell Windows 8 Media Kit that didn't not came with your Dell PC as each Dell Windows 8 Media Kit has a Unique System Specific License Key for Windows 8 which is Injected into the System Bios and can't be retrieved by the User.
Next Time if you purchase a new Dell PC, Always remember to make the Recovery Media using Dell Backup... Read more

18 more replies
Relevance 74.62%

i have an asus 1025CE netbook.
For whatever reason, i don't have the recovery partition on it.

I do however have the recovery backup that i made when i first got it. It is stored on a USB external desktop hard drive 2.0. (toshiba 1TB).

When i boot up from it, i get to the asus recovery screen, but when i select either 'install to partition' or 'install to entire HD', it pops up with a message 'please insert external hard drive for backup'....

this makes no sense to me. anyway, i have tried different usb ports, tried attaching another external hard drive, and its made no difference, it still comes up with the same thing.

because i don't have that recovery partition, i can't go the normal route and boot straight off that on the hard drive.
Is there any way i can recreate that recovery partition, put the backup files that are currently on the USB external drive onto the partition and then try it? will that work?

Answer:No recovery partition, have recovery disc, how to install

You're best bet by far is to follow this tutorial by Gregrocker. Clean Reinstall - Factory OEM Windows 7

1 more replies
Relevance 74.62%

HP Pavilion Notebook - 15-ab223nx (ENERGY STAR) i had upgrade windows 10 to build 10586the recovery partion had changed to letter Fand then hp recovery maneger donnt sea or know the  recovery partitioni changed the recovery driver letter again to Dbut still have the same problem

Answer:hp recovery manger dont sea recovery partition

thats my partitions

2 more replies
Relevance 74.62%

i had genuine windows 7 installed in my laptop at the time of buying.I installed windows 8 over it.now i want to reinstall windows 7 again so i need to copy recovery partition from pc to recovery drive.how should i do it? 

Answer:copy recovery partition from pc to recovery media

Hi, xyz_111
 
If the recovery partition is still on your machine and has not been removed/formatted, then you should be able to boot back into that partition to restore your system.
 
To do this, turn on the machine. As it is going through POST (ThinkPad logo) tap Enter repeatedly. Continue doing this until a menu appears. One of the options on this menu should be to Recover Your System. Press the associated key with this action and follow the prompts. See if this allows you to get back to Windows 7.
 
Hope it helps,
Adam





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

9 more replies