Computer Support Forum

Satellite c875-153 - blue square jumping and says enter password

Question: Satellite c875-153 - blue square jumping and says enter password

Hello I have a problem with a c875-153 toshiba, was broken on the screen, and sa change it but now I turn puts enter password and I never put my password. I hope the answer greetings

Relevance 100%
Preferred Solution: Satellite c875-153 - blue square jumping and says enter password

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Satellite c875-153 - blue square jumping and says enter password

A Toshiba Service Center can remove the power-on password for you.

1 more replies
Relevance 83.23%

Hello. At start Satellite L855 - 11K appears for a few seconds the F2/F12 options and immediately appears a blue window asking for the password, "Enter Password", and that's all since I recover the password for my son and don't know what happens or what he does. What can I do to start the computer again? Thank you in advance.

Jose Bueno

More replies
Relevance 82.41%

Hello

When I restart my computer today , I have a Blue Screen with "Enter password" like this :
http://i.stack.imgur.com/V3kop.jpg

I do not do anything and I don't define any password before turn off my computer .

I don't understand what I have this today ?

Could you help me, I am blocked?

Thanks for your help

Best regards

Mikaa

Answer:Satellite C850D problem blue screen "Enter password"

Hmmm?. Looks like a BIOS password.

Could it be possible that another user/person set it on your notebook?

However, I have no idea why this appears but as far as I know the unknown BIOS password can be reset only by an authorized service provider in your country.

2 more replies
Relevance 78.72%

Hello there

So I'm experiencing strange BitLocker behaviour. I have this PC at work. Clean Windows 8 x64 installation, 3 HDD (AHCI), no SSD.

After I set up BitLocker to encrypt "C" partition, it gave me pop-up window, that I should restart PC to test the BitLocker loader. So I clicked Yes. And after few seconds I got this:

JPG IMAGE - http://www.eightforums.com/attachments/f1/f2/22871d1370880908t-very-strange-bitlocker-enter-password-startup-screen-5jkippr.jpg

Mind, I'm still ABLE TO type password (i can't see sh** though), after I hit enter Windows IS booting, but it's really weird to see above picture instead of:


My GFX is OK, I tested it with games, benchmarks etc.
BitLocker simply cannot, for whatever reason, use my video card properly and displays those weird lines. After all - it hasn't loaded the whole Windows yet. Than again, it IS a bit strange, as Windows installers tend to work fine.


Any thoughts people?

Kind Regards

Bart

More replies
Relevance 71.34%

When I try to turn on the laptop it says "enter administrator password or power on password" then when I try the only passwords I know for my laptop it says "system disabled 86381856". I don't know what to do or how to fix it and I saw that on a few other threads you were able to help people with the right thing to type in and was hoping you could help me as well cause I'm going crazy trying to solve the issue!! Thank you so much!!!

Answer:Enter admin password or power on password blue screen

Hi, Enter  39089298 Regards, DP-K

1 more replies
Relevance 69.29%

I'm having a problem with a Toshiba Satellite L300D. After I reinstalled the HDD it would beep. To solve this I went into BIOS to look and see if the board had some sort of intrusion setting. When I exited the BIOS and restarted I know get the Enter Current Password (with a blue background on a black screen) with continuos beeps. The thing is it seems to auto enter in 10 characters (*) and then stop. There are no other options.

I have searched unsuccessfully for any info about this and I cant even find where the CMOS is located which I think is soldered onto the board.

Has anybody had any similar experience like this?
I would really appreciate any help its driving me crazy.
 

Answer:Bios Password 'Enter Current Password' on Toshiba Satellite

Your thread is closed. We do not help with password problems. This is clearly stated in the rules section.
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.Click to expand...

Please read and follow the rules when posting.
 

1 more replies
Relevance 66.01%

HELP ME I LET MY SON USE MY LAPTOP AND A FEW DAY LET I PUT IT ON .......... TOSHIBA LOGO AND THEN A
POP UP IN BLUE SAY ENTER PASSWORD
SO I DID AND THEN....

SETUP WARNING
INVALID PASSWORD

Answer:Satellite Pro L10: Pop-Up in say "Enter Password"

Hello Caroline

Unfortunately there is no way to bypass the user password. Ask your son and enter the operating system. Then you can remove it without any problem. It can be changed in Toshiba console under Security tab.

Bye

1 more replies
Relevance 66.01%

after entering 3 wrong pasword "system disabled i65508253"

Answer:blue box requesting 'enter administrator password or power o...

Please try this Password :  70460895    Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

5 more replies
Relevance 66.01%

Son borrowed computer, returned it , later tried to get on and above phrase ocurrs on blue screen. Son cannot remember any of the passwords. Tried software programs, start and hold certain keys down, etc. Did not try the green jumper. need to get on so i can reboot from recovery disk













Solved!

View Solution.

Answer:Blue screen with enter administrator password or power on pa...

Unfortunately, no one would be able to help you with that. There are supposedly free Windows password cracking software out there on the net you can do a search for. Otherwise you will need to reinstall Windows with a recovery disk or a plain Windows installation disk, if you are asked for a password to use the recovery disk (which I have never heard of).

8 more replies
Relevance 65.19%

satellite c50-a-1dv

The system just hangs when I enter my password. I have tried to reinstall windows but I get the error message:

0xc0000185
required device is not connected.

Any help gratefully received.

thanks

Answer:Satellite C50-A-1dv - hangs when enter password

Have you tried to reinstall original recovery image?

1 more replies
Relevance 65.19%

I have had this issue for about a year now. It used to be whenever i pressed the power button to put the laptop to sleep, now its happening whenever i start up after shut down (not restart): A blue box pops up saying to enter current password (black screen behind) and accepts the administrator password...what could be causing this and how do i remove it please? .. I am totally computer illiterate but i can provide more information...

More replies
Relevance 64.78%

hello

i search a rack hard drive for a sattelite c875-152. thanks for your help

Answer:Need HDD rack for Satellite C875-152

Google a bit around. Maybe you can find some online store in your country where you can order it.
It is not easy to find such parts.
Try also to contact Toshiba service provider in your country. I’m pretty sure they can order it for you.

4 more replies
Relevance 64.78%

Hi,

I have a Toshiba Satellite Pro S300-11Y laptop and have a problem. A day, I decided that wanted to set a supervisor password for the bios of the laptop. Now, I remeber this password, but when I entry to the BIOS setup, I can't view any option for change o disable this password. I can't entry this password for set it me a supervisor, and also I can't modify some options as for exemple, the boot sequence.

How can I delete this password or how can I login as supervisor? I don't see any option for it, and I need to modify the boot sequence.


A lot of thanks.

Answer:Satellite Pro S300 - How to enter supervisor password?

Hello

About this I can only say check your user manual!!! ;)

There I have founded the following information:
+C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
+This utility lets you do the following:+
+Register, delete or change the supervisor password+
+Create or invalidate a supervisor password token+

Check this and then you should be able to delete the password if you know the current.

Greets

1 more replies
Relevance 64.78%

Hi All, how have u been.

It's been 2 months I have bought the laptop Satellite A300-1PH. Yesterday, first time I tried to see my system BIOS by pressing F2, but it required Password to enter onto BIOS but I never put the password as I am very first time opening it.

Can anybody tell me what is the exact problem?

Answer:Satellite A300-1PH - Why I have to enter a BIOS password?

Maybe the shop who sold you the laptop put a Password on the BIOS?

Give them a call and ask if they put BIOS passwords on their laptops.

If they say no, then you should send the laptop to an Authorized Service Center. There is a list of ASP's on the Toshiba website in the support section.

2 more replies
Relevance 64.78%

Hello,

When I start my computer I have to enter a password (BIOS password?).
I do not have this password and don't know how to solve this.
I am not able to get into the BIOS system to change the passowrd. I just simply cannot do anything. Any suggestions?

Regards
Raymond

Answer:When I start Satellite I have to enter a BIOS password

> I am not able to get into the BIOS system to change the passowrd. I just simply cannot do anything. Any suggestions?
Unknown BIOS password cannot be removed.
In such case you have to ask ASP for the help

3 more replies
Relevance 64.37%

Hello

Is there any way to enter an ASCII character that shows up as a white square box?

Background: In my hand-written pand & paper notes, I have various conventions for using different types of bullets in the margin. And if I draw a white square box in the margin, this provides a quick way for me to visually scan my notes to find anything that is an exectable task that requires action.

What I then do is come back and tick the box once it is done.

Does any ASCII character exist that will reliably show up in different applications as a which box with a solid/black border? And if so, is there any way to enter it using Alt plus the numeric keyboard?

Also good would be an ASCII character for a box with a tick inside it. (Or even just a tick?!)

Cheers

J
PS I am using Windows 10, the English Language, the UK region and various standard applications (e.g. The MS Office365 suite, TextPad, MindManager, MLO, Xara, plus Firefox/Edge/Chrome browers)

Answer:How can I enter a square box as an ASCII character?

If you hold down alt type tge ASCII number it should work

3 more replies
Relevance 64.37%

Hey,

I am running a Satellite c875-150 with Windows 8 which gets to the toshiba leading innovation screen, loop boots for a bit and then just hangs there.

I have tried holding F8 as it boots.

I have tried holding F12 as it boots. (stupid windows 8 settings means that I haveto also hold Fn down).

I have tried holding 0 as it boots.

I have put in the recovery disk (it doesn't recognize it).

I have put in an ubuntu CD (it doesn't recognize it).

Basically, I now have a ?450 paperweight :S

The only other thing I might try is getting a windows 8 boot disk and seeing if it will run it... it doesn't seem to want to boot from CD anyway.

I miss Windows 7.

Thanks :)

Answer:Satellite C875-150 won't boot at all (Win8)

> I have put in the recovery disk (it doesn't recognize it).

Access the BIOS (press F2 while powering on the unit).
In BIOS disable the ?secure boot? and switch from UEFI to CSM mode
Save the changes, and now you should be able to boot from a bootable disk

2 more replies
Relevance 64.37%

I have bought a new SATELLITE C875-13E ARTIKELNUMMER: PSCBAE-02L00HDU from Wehkamp.nl, tomorow I will get it,

how shall I know which the drivers and software that I must download?

I don`t know well at which date this computer is manufactured and all the hard and software were installed?

I really need a help before I do a mistake by downloading some updates that are not necessary or suitable for this Laptop.

Answer:Re: Drivers Download for Satellite C875-13E

According notebook specification this notebook is preinstalled with Win8 64bit so you don?t need any driver, just start notebook and configure preinstalled OS.

My only advice for you is to create recovery media. How to do this you can find in user?s manuals document.
If you have more questions you are welcome.

13 more replies
Relevance 64.37%

Hi.
Laptop satellite C875-114 .

I have one problem, my laptop it's not going shut down.
Screen off, power light its on, wireless it's on, cooler also work.

Only press power button 2min to going shut down.

I use windows7 64bit and windows8 64 bit same problem.
Bios 6.7 new.

Answer:Satellite C875-114 does not shut down properly

It sounds like something is blocking up the shutdown process. OK we know which operating system do you use but we don't know what is exact configuration and which third part software or hardware do you use.

When you would say that this happen with clean preinstalled OS ad ?factory settings? then we could talk about some serious problem. At the moment it is not easy to say why this happen.

Try to end some running processes manually and I hope you will be able to find out what is blocking your notebook.

By the way: since when have you noticed this behaviour?

4 more replies
Relevance 64.37%

Hello,
I have a laptop Toshiba s / n xc366424r
The hard drive is dead, can not restore it with the partition recovery.
Change the hard drive is not difficult, nor reinstall windows. But how to recreate the partition recovery, and backup the system on the new hard drive?
Will the windows license installed on the old hard drive still be operational with the new hard drive?
Thank you for your answers.
Regards,

More replies
Relevance 64.37%

Hello,

I bought a Toshiba Satellite C875-135

I access to the bios with F2 a first time, but I made ??the mistake of activating the option "Boot ultra-fast", and according to the user manual, the BIOS configuration is now "limited".
Now I cannot access to the BIOS anymore: I tap at the start the ESC, F2 or F12 without success, I always get windows.

What to do ?! How can I recover the "normal boot" ?

Thank you.

Message was edited by: jeremm

Answer:BIOS inaccessible on Satellite C875-135

Hi

Did you try to press and hold F2 while booting up the unit?
Check this?
Usually you should be able to access the BIOS even if the "Boot ultra-fast? has been enabled.

1 more replies
Relevance 64.37%

Hello,

I own one Sattelite C875-13L PSCBCE.
I'm running windows 8 and when I press the F2 key on startup of the computer, the computer starts Windows. I can not access the Bios was only from windows 8 (Settings> General ...
I have a second problem also, I can not disable the option to "Panel Open - Power On". This opion is enabled or not, the PC starts with the panel open.

Thank you for your answers.

Answer:Cannot acces BIOS on Satellite C875

Perform complete shut down following http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after doing this start notebook again and try to enter BIOS settings.

2 more replies
Relevance 64.37%

I have a toshiba c875-153 and i can't downgrade to windows 7
my computer was using windows 8 but after winodws update it crashed so i installed windows 8 again but it always crash with windows update, so i decided to downgrade in windows 7

i went in BIOS and i disable secure boot but can't install windows 7 so i used CSM bios instead of UEFI but the screen shut down!! if i turn again in UEFI again the screen turn on again!! i use the last BIOS 6.8

is anyone can help me??
thanks

Answer:Satellite C875-153 - downgrade to Windows 7

I have checked Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp - at first to see if your machine is supported for Win7. Yes it is. All necessary drivers, tools and utilities can be downloaded.

Generally speaking Win7 installation should not be so problematic. Do you use original Microsoft Win7 installation disc?
To be honest I don't understand what happen with your machine and BIOS.

Useful instruction about changing BIOS mode you can find - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

What happen exactly when you change Boot mode? Can you start Windows installation?

7 more replies
Relevance 64.37%

Is it possible to upgrade a C875-15G to Win10? Currently it's not on the list of supported laptops on the Toshiba website, but Win10 compatibility check does not encounter any issues.
Did somebody tried to upgrade such a laptop already?

Answer:Is it possible to upgrade Satellite C875-15G to Win10?

I tried to upgrade in 2014 but that didnt work.

Some problems with the taskbar and cpu tied up continuously.

I had the same problems with a dell running on w7. Recently I upgraded the last one again and it runs well now.

So I am planning to upgrade the C875-15G again tot W10 again shortely.

Are there any reports from successful installation on the C875-15G?

1 more replies
Relevance 63.96%

Hello, I have a problem with my Satellite A300-14S PSAJ0E-00W00PSK.

*Screen with input "Enter password" appears every time when I turn it on.* When I put wrong password 3 times, my laptop turns off. I had installed windows 7 with ubuntu for 2 years with no problems but I cannot boot any operating system now (even when I boot with inserted CD/DVD with windows/ubuntu).

*When can I get correct password? Or it is another solution of this problem?*

Thank You for any advice!

Answer:Satellite A300 - "Enter password" on startup screen

I presume your notebook is locked with BIOS password.
BIOS password cannot be set from alone but I don?t understand your situation.
Either you have blocked your notebook with BIOS password or someone have done it without your knowledge.
Have you some explanation for this situation.

Anyway, if BIOS password is not known to you, you must contact nearest Toshiba service and ask for help. They can remove it for you.

2 more replies
Relevance 63.96%

Computer is a satellite pro C660-29W PSC1ME-00U00KEN

I've set a BIOS supervisor password (no user password is set). I know the password.

If I hit F2 it enters the text editor but does not give any opportunity to enter the password, and so whilst I can view everything there is no way to change anything.

Any suggestions?

Answer:Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

Can this be helpful?
http://aps2.toshiba-tro.de/kb0/TSB0B032D0000R01.htm

1 more replies
Relevance 63.55%

Hi,
I am having an issue with my sister's Satellite C875-10T
Thought it could be usefull to activate the "fast bios" parameter
and this occuered to be the worst idea to have !!!
I am no longer able to access again to the BIOS,
despite my unbootable cd trouble which i will have to try on another Pc to be sure that the cd is ok...

Anyway, the computer is running windows8 and the Toshiba Hardware settings that I downloaded isn't working (and was not made for w8 but seven indeed... :/ )

I really need help on this and would really appreciate that someone fromthe Toshiba Team would give me help on this !

Thanks to you all !

Answer:Fast BIOS issue with Satellite C875-10T

You can change it to ?normal? mode again.
Open Toshiba System settings > BOOT > Boot speed and change it to ?normal?.
Please do this and let us know if everything is OK again.

2 more replies
Relevance 63.55%

My Satellite C875 was buggered up by a Windows update and now it won't boot.

Error code 0xc000014c

I don't have a copy of the original OS disc to repair it but if I know my Windows serial number I can create a disc.

I've tried and tried to contact toshiba to get my number but it's like wading through glue.

Please tell me who to contact

More replies
Relevance 63.55%

Hello

I just bought a pc Satellite C875-123 in an auction knowing that person emptied the computer but I do not know how they did exactly.

So when I turn on the pc, after the Toshiba logo, message playing on a line: "Checking media fail" then 2 times Checking media" then it fades and a line appears: "No bootable device - please restart media ".
I tried F8 and F12 but the same lines appear.
I think we need to do a restore but I have no CD. If this is what it is possible to find out how.

Thank you for the answers.

speedwell

Message was edited: posting has been translated

Answer:Satellite C875-123 - Checking media fail

Hello

Try to enter BIOS settings using F2 at start up and check if HDD is recognized properly.
You can also remove cover at the bottom side to check if HDD and RAM are inside.

This notebook model was delivered with Win8 64bit but obviously you didn?t get original recovery media with it. What you can try is to obtain Windows installation disc and check if you will be able to install operating system.

Original recovery disc for your notebook model can be ordered on https://backupmedia.toshiba.eu/landing.aspx

4 more replies
Relevance 63.55%

I was stuck on a Toshiba C875, unable to install on UEFI mode, and as the internal screen was inoperant in CSM mode... well, obviously I had to find a solution .

I solved the problem by installing the system in CSM mode, then after full install on external screen, I changed the partition to GPT, using the tutorial below, then back to bios to put the system back to uefi , as my internal screen works only in UEFI : then it works....

BTW : I made this install in Windows 10, beware : the drivers of the radeon card aren't working correctly. So I disable the WU drivers updates, and I use a Microsoft standard driver.


So, first, with an external screen plugged, install all your system, then follow the instructions provided here :

http://social.technet.microsoft.com/wiki/contents/articles/14286.converting-windows-bios-installation-to-uefi.aspx


Thank you Mr Carlos J S A for your solution !

More replies
Relevance 63.14%

hi,

i haven?t used my toshiba Satellite P300-1AO for more than half a year since I am having a new laptop.
Now I need to grab some data from the satellite but I can?t coz I forgot my user password.

And I am probably too dumb to reset is, because after inserting both an empty CD and after connecting a USB Stick the computer says that CD/ USB Stick can?t be used for resetting the password. What am I doing wrong?

I need the data from that thing and the more I am waiting the more I am getting nuts...

Can anybody please help me?

Thanks in advance,
Timo

Answer:Satellite P300-1AO - Can't enter my user profile - forgot password

Timo if you can obtain ?2,5? AluminumSATA HDD Enclosure? connect HDD from your P300 to another PC as external device. On this way you will be able to have full access to all saved data.

After doing this put the HDD back and install original recovery image or Win7 32bit. It works perfectly on P300.

1 more replies
Relevance 63.14%

Why do i get a enter password screen on my Toshiba Satellite laptop on start up, how do I unlock it, I got this laptop from a lady and when I turned it on it was locked with this screen and I don't knoe how to unlock it, can some one give me a solution, and why did this happen.

Answer:Why do i get a enter password screen on my Toshiba Satellite laptop on start up

To unlock the laptop, you type the ladies password. Once unlocked, create your own login with your own password.
TSF cannot help you with password circumvention. Read the rules

3 more replies
Relevance 62.73%

Yesterday I bought Toshiba Satellite C875-S7304 but I have problem with activation windows 8 - error 0xC004C003... Anybody has the same problem?

How do I solve that?

Answer:Satellite C875-S7304 = Problem with Win8 activation

A new laptop with win8...

2 more replies
Relevance 62.73%

I'm trying to help someone. When he first ran his Toshiba Satellite C875 laptop (bought in the UK), he reckons he must have selected Norwegian, and now everything is Norwegian.

Even if I run the recovery partition by booting with F8 pressed - everything is Norwegian.

Anyone know if there is some way of doing a factory reset, so the laptop boots in an out-of-factory condition?

Answer:Satellite C875 - System Langauge stucks in Norwegian

Hi

Maybe this document could help you:
+Windows 8 Recovery & Repair+
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

I recommend you to choose the option called Reset Your PC.
This would set the system back to factory settings. As far as I know you should be able to choose another language.

But I remember in the past (Windows 7) that such language could be chosen only one time.
After that the other languages were deleted from the partition and it was not possible to choose another language.

However, recommend checking the +Reset your PC+ option

6 more replies
Relevance 62.73%

on a laptop toshiba Satellite C875-152 update windows 8 to 8.1 does not.
I completely reset the pc and updated all the drivers as indicated, but the update is still not happening.

I have a 0xc1900101 error-0x30018

please, help me

Answer:Satellite C875-152 - Win 8 to Win 8.1 upgrade problem - error 0x30018

I wrote to Toshiba helpdesk but nobody helped me... I keep you informed?

2 more replies
Relevance 62.73%

Hello

My daughter grilling his video card that I made to change by a specialist.
When I recovered the computer, as it no longer bootait on anything, I reformatted the HDD and I installed linux instead WINDOWS. Since the graphics card change was made, when I turn on the computer, it always stops exactly 30 minutes after startup.,

If I turn back, he goes immediately again for 30 minutes. I changed the processor, and check the RAM memory module. If I start a Live CD like this. Nothing works.

Looks like something is programmed into the motherboard so that it stops every 30 minutes., Has anyone any idea what's going on and what I should do about this ??,

thank you beforehand

More replies
Relevance 62.73%

I bought a Satellite C875-13F in the hury with WIN 8, but I like to go back to win7. Is that possible with the same license code?

With greetings, Aart

Answer:Can I downgrade Satellite C875-13F from Win8 to Win7 with same license?

Hi

Check this Microsoft page to understand the downgrade right:
http://www.microsoft.com/OEM/en-gb/licensing/sblicensing/Pages/downgrade_rights.aspx#fbid=6jf3dZU2VW0

Windows 8 *Pro* includes downgrade rights to:
? Windows 7 Professional
? Windows Vista Business

I think you have got Win 8 and its NOT Pro... so you canot downgrade... you have to purchase the license for Win 7

1 more replies
Relevance 62.32%

Hello,

When I turn on my laptop, I have Toshiba starting screen with a message:
"Preparing automatic repair"
And then there is only a dark screen and after some time, I am getting the message:
"Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you."

And then the PC restarts and again I am getting the message: "Preparing automatic repair"..
This loop lasts for some hours by now.
Does it finally bring me Windows starting screen?

Any help would be appreciated.

More replies
Relevance 58.22%

I created a shared folder on a Windows 7 laptop on my network and I'm trying to connect to it with this Windows 10 laptop. I am being prompted to enter a un/pw and have no idea what to enter. The account on the Windows 7 laptop doesn't have a password.

More replies
Relevance 58.22%

I regularly use my laptop over the wireless network to access folders on my desktop machine - both are Win 7.

Today I bought a new Win 10 laptop and when I try accessing the desktop machine, the new Win 10 laptop asks for UN/PW via the dialog "Enter network credentials."

I have no idea what to enter. Assistance is greatly appreciated.

Thanks.

More replies
Relevance 57.4%

Hi,

I recently purchased a Satellite U300 Laptop and sometimes when I turn on the laptop the screen message says:

Press F2 to enter Setup, F12 to enter Multiboot Selection Menu

I press F2 and F12 but there is no response.
Firstly, why do I get this screen message instead of being logged on to the laptop as it normally does?

Secondly, why are F2 and F12 unresponsive?
Hope someone can offer great advice!!!!

Regards, Barry

Answer:Satellite U300 - F2 to enter Setup, F12 to enter Multiboot Selection Menu

Hello Barry

This menu is available on all notebooks with Phoenix BIOS version. As this message say choose F2 or F12 but not both at the same time.

When notebook starts press F2 and keep it down for a few seconds and BIOS settings should be shown on the screen. The same is with F12.
Believe me I have done this hundred times on several notebooks with Phoenix BIOS and both options are shown every time I want to use them.

1 more replies
Relevance 56.99%

i have a blue square appeared on my screen after login and a message in bottom bar saying it is CETIUI_MainForm how can i remove it please im desperate
 

Answer:blue square on screen

From a thread back in 2007 on the subject.
"Hello all, i to had this problem and after wandering the web and looking and i have found the solution to the problem(cntrl+alt+del)=task manager and it shoud be easy from there for those of you who expeirience this problem."
 

15 more replies
Relevance 56.99%

I suddenly have a transparent blue square with an arrow below it. I tried to right click on it; nothing and the virus scan says all is well. Any thoughts? Thank you!
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Basic, Service Pack 2, 32 bit
Processor: Genuine Intel(R) CPU 575 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 1
RAM: 1915 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 830 Mb
Hard Drives: C: Total - 152624 MB, Free - 87030 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

Answer:Transparent blue square

Where is it located?
 

3 more replies
Relevance 56.99%

Hello Everyone !

Have notice a little blue square in the middle of my monitor which is a hp pavilion f1703
have been unable to determine where it came from and have no Idea how to fix ! It only shows up on the desk top wall paper have changed wall papers several times no relief .
Any Idea's ?
 

Answer:Solved: Little Blue Square

15 more replies
Relevance 56.99%

HI, Satellite L70-A-13P

I setup a user and supervisor password. Works fine. However I can't anymore enter bios. If I press F2 as usual, i have the box "enter password" (the same as for normal boot). After typing the supervisor password, the computer continues to boot and don't enter bios!

I keep F2 key pressed but nothing works.
I also tried Esc, F1, INS, F12, 0.

Help.

Answer:Satellite L70-A-13P - can't enter BIOS after setting BIOS password?

Are user and supervisor password the same?
Have you been able to enter BIOS in the past?

Perform complete shutdown and start notebook again. Then try with F2 or F12. When you will be asked put supervisor password and I hope you will be able to enter BIOS settings.

5 more replies
Relevance 56.58%

Hi.

I have a problem with regular Enter key and numeric enter key. In Adobe InDesign regular enter is used for paragraph return and numeric enter for frame or column/page/frame break. So... on my Satellite P300 eith a NumLock On both enter keys work as Numeric Enter key, so there is no plane old Parahraph return.

And with NumLock OFF Numeric Enter key still works as Numeric enter key, and regular Enter key doesn't work at all. Any ideas?

Answer:Enter/Numeric Enter key functionality on Satellite P300

I would try a BIOS update. http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

If that doesn't work, then you should get an ASP (authorized service provider) to have a look.
I remember reading somewhere that they can use a utility to set the screen size to 17" which fixes Numpad problems. However this utility is only available to ASP's.

3 more replies
Relevance 56.17%

A blue square appeared out of nowhere.in the middle of my desktop.Is it the fore-runner of THE BLUE SCREEN OF DEATH?

Answer:BLUE SQUARE -- does it predict doom?

Good question, who knows, i suppose it will depend on how big the square is, what you are doing when it appears, what operating system it appears on, and!!!

7 more replies
Relevance 56.17%

I removed the arrow from my desktop icons, but i see there is now a thin blue square around most icons. The blue line seems useless and clutters the icon. Does anyone know how to get rid of those blue lines? And why do they appear on some icons and not on others?

Answer:Thin blue square on icons

gogreen said:

I removed the arrow from my desktop icons, but i see there is now a thin blue square around most icons. The blue line seems useless and clutters the icon. Does anyone know how to get rid of those blue lines? And why do they appear on some icons and not on others?



Replace the shortcut arrow using the same method that you used to remove them and then use Winaero Tweaker to remove them. I had the same thing happen to me when I used "Shortcut Remover" program to remove them. After much frustration, I came across that same setting in the Winaero Tweaker program and it worked without the little boxes.

6 more replies
Relevance 55.76%

For days now with no success, I have been trying to update from Windows 8 (64 bits) to Windows 8.1 a Satellite C875-153 (PSCBCE-03H002FR)
I am opening a new thread as none of the available threads on this forum have helped me nor my researched on the web.

*1st error* - which I was able to "sort of" figure out is:
-> *Windows 8.1 update fails with error message 0xC1900101 - 0x30018*

I have followed every steps, in the proper order, of this Toshiba guide, but it didn't help fixing the error:
http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/

I then followed recommendation from this thread and was "temporaly" able to update OS to Win 8.1:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=296594

The step that worked for me was to remove network cable while installing windows 8.1 as suggested by user "RandyRoberts".


*2nd error:*

*-> Windows 8.1 hangs and system tried to revert changes back to Windows 8*
By unplugging the network cable, I was able to complete the update of Windows 8.1 and run it temporaly.

As soon as I replug the network cable and reconnect to the web, the computer hangs and restarts.
I suppose Windows 8.1 is trying to check the licence status and then refuse to activate it.
Windows ends up trying to revert changes and go back to Windows 8.

It hangs at restart and refuses to reload previous OS (Windows 8), leaving me on a screen with couple options. At t... Read more

Answer:Satellite C875 : Windows reverting changes after update to Windows 8.1

Hi GROM

I guess you found and read also this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

the user harrie_1 were able to update to the Win 8.1 and the update procedure went smoothly.
I don?t know exactly why this workaround did not function in your case but I would recommend you to start the procedure once again and follow the update as described by harrie_1 user

1 more replies
Relevance 55.76%
Answer:tiny blue square in the centre of my screen

Please give a proper explanation.This lot means nothing to me:bi</a>Please come back and let us know how you got on.

4 more replies
Relevance 55.76%

I have pic files also a new hp laptop when i want to upload a pic i get a square with blue in it but no faces. When i upload them no telling what i willget sometime a pic sometime a comic which i never had pic of games all kind of stuff except for my face pics

More replies
Relevance 55.76%

If anyone has a good process for correcting this problem I would be appreciative in following it. It does not happen all the time and my searches are not giving me a fix that is working.

Thanks in advance.
 

Answer:Red Square, Green Circle, Blue Triange in Box

Hi

What Windows version are you using?

Where do you see this icon, is it in your browser, if so which one you using?

What type of webpage are you on as this could show up in an icon in top left corner for a flash or shockwave video/animation that you dont have the plugins for, both are HERE and HERE

may also be JAVA so Java Runtime is HERE

As you have gone through the malware read me in the past then you should still have CCleaner, so run its cleaner to clean up temps and cookies with the browser windows all closed and then try again.




Likehood is images are not showing http://support.microsoft.com/kb/283807
 

1 more replies
Relevance 55.76%

This is second time i see this blue screen when i switch on my PC.
What is this, how to solve it?

Thanks for answer and Sorry for bad grammar typing.

Answer:This blue square screen were appeared when i was switched on my PC ?

That's called a BSOD, Blue Screen Of Death. The image is too small to be useful though. You should post here following the instructions: BSOD Help and Support - Windows 7 Help Forums

Blue Screen of Death (BSOD) Posting Instructions

2 more replies
Relevance 55.76%

Running XP SP2 and having problems with yahoo email intext photos. Sometimes I get the photos and sometimes not, but in place of the red x in the little square I get a red square, blue triangle, and a green circle. If I right click and hit properties it shows the protocol to be hypertext transfer.
Also if I try to forward an intext email with photos I get a red x and no photos on the forwarded intext email. I have changed some of the default settings in my internet options but I must still be missing some. It may be a yahoo thing as other persons with a different email service receive the photos OK. I checked my yahoo preferences and I am not blocking html images. Thanks for any suggestions!
 

Answer:red square,blue triangle,green circle vs red x

Could be your firewall settings?

What you are seeing is the "placeholder" where the image is to go.

The image is not available so thats why you only see the placeholder.
 

3 more replies
Relevance 54.94%

I am having trouble viewing some web pages. I get a small box w/red square, green circle, and blue triangle in the top left corner where a picture or other objects should be. I have read the other posts and tried the suggestions to no avail. An example would be vfc.com. All I see is the VF Corp logo and the pesky little box. Any suggestions?

Thanks
 

Answer:small box w/red square, green circle, and blue triangle

13 more replies
Relevance 54.94%

i cant remove blue square padlock that appears on my monitor screen to my desktop

Answer:blue padlock in square box appears on monitor screen

We need more details, this will help: http://www.computing.net/howtos/sho...

2 more replies
Relevance 54.94%

There is a tiny blue square on my screen right smack in the middle. I can click on it and it goes dark blue. I click on it again and it goes light blue.

I don't know when it appeared exactly and I haven't been able to pick up info anyhwere on the internet about it. It doesn't appear on the extra desktops that I have just created....
Here is my Hijack list *Thanks*
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:23:28 PM, on 10/12/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Microsoft Windows OneCare Live\Antivirus\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\arservice.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Microsoft Windows OneCare Live\OcHealthMon.exe
C:\WINDOWS\system32\IoctlSvc.exe
C:\WINDOWS\system32\H... Read more

Answer:Solved: tiny blue square on center of desktop

14 more replies
Relevance 54.53%

For the last week or two, I've been unable to see videos on blogs or websites. Instead, I get a big white box, with a little box with a red square, blue triangle, and green circle. I've searched for answers, and reinstalled Adobe Flash, Real Player, and Windows Media Player. Nothing seems to make a difference. can view videos at YouTube, it seems to be the embedded videos that are the problem. Can anyone help? Thank you!

Answer:can't view video - get red square, blue triangle, green circle

I have this same problem

1 more replies
Relevance 54.53%

Everytime I want to see a video it won't play and a red square, green circle, blue triangle will appear inside a little box on the upper left side of the video.
youtube and google videos would play but some won't like myspace and soccerclips.net videos and much more other websites.

I need help please,

windows xp
IE 7
 

Answer:Red Square, Green Circle, Blue Triangle error on videos Need Help!

14 more replies
Relevance 54.12%

As above really. Trying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems.

I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password.

Every combination possible of username and password from the 2 systems (including '\' or 'SYSTEMNAME\' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.

Any help would be greatly appreciated. Thank you in advance!
 

More replies
Relevance 53.71%

Alright, I've been having this problem for a while now, but have just been too busy/lazy to do anything about it until now. It seems that on any webpage that would have a video playing, i get a blank white box with a red square, green circle, and a blue triangle symbol in the top left hand corner instead. I dug around a bit and found out that this symbol usually means that the video is downloading, or waiting to be downloaded, or something like that. But no matter how long I wait, it doesn't go away.

I built my computer about a year ago, and I didn't ever have this problem until recently, it happened out of nowhere. Its a minor issue, but I'd like to get it resolved. I've ran ad-aware and spybot S&D, have all the windows updates, and downloaded the newest drivers for my video card, and nothing has changed. I'm usually able to figure out any problems with my comp on my own, but I guess I'm just stuck on this one. Any help is appreciated.

Answer:Online Videos Don't Work (red square, green circle, blue triangle)

what browser are you using?

sounds like your just missing some plugins.

1 more replies
Relevance 53.71%

Hi.
Not been here for a while.
I have added a profile picture to my wife's youtube channel and google + page , and also added the page banner.
It all shows up nicely on PC, Macbook Pro, iPhone and iPad.
However, when I post a link to her youtube channel to Facebook, instead of showing my profile picture, it is showing a blue square.
I was hoping to add a picture to show you but it won't let me.
Any help would be greatly appreciated please.
Thanks

More replies
Relevance 53.71%

Hi,

Just converted from Win 7 Pro to Win 10 Pro yesterday, and afterwards installed a TPM chip. The chip is recognized by TPM Management. I haven't turned on Bitlocker yet.

The only way I can see to change the Owner Password first requires that I enter the current TPM Owner Password. The TPM seems to have been automatically initialized and Prepared by TPM Management. I assume that means an Owner Password has been generated but I have no idea what it is or how to back it up.

Perhaps it's tied into the Bitlocker Recovery Key? Just a guess; like I said I haven't turned on Bitlocker.

Has this something that has recently changed with Win 10? Is it safe to begin using Bitlocker even though I don't have the password saved offline?

Thanks,
Mark M

More replies
Relevance 53.71%

I have a user with an HP Probook 5310m. Every few weeks the user is unable to connect to a wifi network. User types correct password but says unable to connect to network, incorrect password. I have verified the password is correct. I used forget network, still does not work. The only solution is to completely remove the wireless adapter driver, delete the software, and then install the wireless adapter again. Once the driver is installed, the user is able to enter the password and connect to the network. Again, after a few weeks, the problem occurs again.
Does anyone have an idea on what is causing this problem? Thanks for your help in advance!

Answer:Wireless network password incorrect - even if I enter the correct password

The problem seems to be with the Driver. Could you go the manufacturers site and download the latest driver for your wireless card from there?
Perhaps it will help.

1 more replies
Relevance 53.71%

I need help I can't figure out the password on the black enter current password screen can you help please i have a hp mini 110 CNU9453269 PLEASE!!











Solved!
View Solution.

Answer:Enter current password screen appears I forgot my password I...

Hi, Enter   e9lovqf7go    ( 3rd character is a lower case L ) Regards, DP-K

2 more replies
Relevance 53.71%

enter adiminstrator password power up password code is system disabled 4854806F can't locate the secondary battery to reset to factory settings

Answer:enter adiminstrator password power up password code is syste...

Try this57420068

1 more replies
Relevance 53.71%

Hello, I have a Power On password issue...the disable code is:   i 68235286Please help, tried many many codes but didn't work.already removed the C-Mos battery, press the power button for many minutes but still not working...please and thank you.

More replies
Relevance 53.3%

Enter administrator password or power on password the system disabled number 53352373











Solved!
View Solution.

Answer:Enter administrator password or power on password the system...

@wagidogg? Enter  42030975 Regards, DP-K

4 more replies
Relevance 53.3%

Not sure how this happened but this is what I keep getting. Enter administrator password or power on password. THIS IS THE ERROR CODE. 63483566













Solved!

View Solution.

Answer:enter administrator password or power on password 63483566

Try: 72581568

4 more replies
Relevance 53.3%

When I turn on my computer I get a blue box that says enter administrator password or power on password. After 3 attempts I get the code 69419016. What can I do?











Solved!
View Solution.

Answer:Laptop enter administrator password or power on password

Hi, Enter:      76571038 Regards, DP-K

7 more replies
Relevance 53.3%

when i try to start my laptop it showing error (ENTER ADMINSTRATION PASSWORD OR POWER ON PASSWORD) 











Solved!
View Solution.

Answer:enter adminstration password or power on password error

Harry Enter   46762314

6 more replies
Relevance 53.3%

Hp pavilion g series . System Disabled .55748040











Solved!
View Solution.

Answer:Enter Administrator password or power on password.System Dis...

Product Name: Hp pavilion g seriesOperating System: Microsoft Windows 7 (64-bit)Hp pavilion g series . System Disabled .55748040

2 more replies
Relevance 53.3%

15-f233wmenter administraive password or power on password (lost)System Disabled code [1 77620677]Help Please

More replies
Relevance 53.3%

My notebook says enter administrator password or power on password and I have no clue what it is. How can I get in?











Solved!
View Solution.

Answer:Enter administrator password or owner on password issues

Hi Try putting the wrong password 3 times.. after that you should get a Halt code.. provide me that code i'll see if i can decode it for you.

8 more replies
Relevance 53.3%

Enter administrator password or power on password after 3 tries I get a 76392325 code. Please help.

Answer:HP stream Enter Administrator password or power on password

Hi: Enter this unlock passcode... 69090901

1 more replies
Relevance 53.3%

Pls help me am new here if I turn on my laptop mini I was ask to enter administrator password or power on password, I tried it three times and I code this code:63777861Help plsThanks

Answer:enter administrator password or power on password laptop min...

Hi: Enter this unlock passcode... 72655267

1 more replies
Relevance 53.3%

enter administrator password or power on password hp.. please 60156263 











Solved!
View Solution.

Answer:enter administrator password or power on password hp 6015626...

@rekinashu? Enter   75834865

2 more replies
Relevance 53.3%

System disabled, 63547877.  Please help, Thanks.











Solved!
View Solution.

Answer:Enter Administra​tion Password or Power on Password

Hi, Please enter     72425279 Hope this helps.

2 more replies
Relevance 53.3%

Recovery Bios Password COMPAQ PRESARIO CQ61 Operating System: Microsoft Windows 10 (64-bit) Hello, I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the bios password. The message that appear is "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD". What can i do? After failing 3 times I get the message "System Disabled" and the code 65032973













Solved!

View Solution.

Answer:Error ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD

Hi: Restart the PC and enter this unlock passcode... 70990375

2 more replies
Relevance 53.3%

HP Presario F504eu Laptop : How to bypass System disable & Admin passwordOptions ?01-18-2013 10:03 AM Product name:  HP Presario F504eu Laptop Operating System:  Vista Home Premium OEMAct Error Message:  "Enter Administrator Password "   Changes made to system that caused issue to occur:  A black screen appeared with a blue box asking to "Enter Administrator Password or Power On Password."   After 4-5 attempts to enter the password that was set for windows, the system disabled itself.   I would have to remove the battery and plug in power cord to reset the computer which continues to ask to "Enter Administrator Password or Power On Password."   Is there anyway to override this or is there a "generic password" to use as a bypass this screen .   I REALLY NEED HELP ON THIS!Thank you.

Answer:&quot;Enter Administrator Password or Power On Password.

At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code.   Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

1 more replies
Relevance 53.3%

enter administrator password or power on password system disabled 65779071

Answer:enter administrator password or power on password system dis...

Please try: 70651077  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.       If my answer solved your problem please mark it as the Accepted Solution. Thanks!

2 more replies
Relevance 53.3%

I am locked out because I forgot my power on password. I am recieving the code: 50659329 upon 3 failed attempts. Thank you.











Solved!
View Solution.

Answer:Enter Administration Password or Power on Password (Forgot)

Thank you so much! You're a life saver.

3 more replies
Relevance 53.3%

hello, I have a hp stream  model number 11-d010wm. that my kid has forgotten the password. im not sure why but it now wont let me do a system recovery or even get in to the bios. ive tried all the F keys during start up and nothing. all i get is a message saying enter administrator password or power password (which i dont know). i try some random passwords and eventually i get a system disabled screen with the error message saying [ i 54723220 ]. please let me know if there is some sort of solution for this. i dont need anything on the computor so just wiping it fresh would be fine if nessessary.   thanks, chad

Answer:Hp stream enter administrator password or power password

@dahc1991? Enter   41681806

2 more replies
Relevance 53.3%

Enter administration password or power on password hp 15-af114au review windows 10











Solved!
View Solution.

Answer:enter administration password or power on password windows 1...

Enter administration password or power on password hp 15-af114au review windows 10

3 more replies
Relevance 53.3%

System Disabled![ 88007110 ]

Answer:Stuck at "Enter Administrator Password or Power On Password"

@Jammer88 Enter:     37965136 Regards, DP-K

3 more replies
Relevance 53.3%

I dont have the administrator password and I try three times, now i have a disabled system and show me a number 68587378.....please help me to reinstall the system and enjoy my tablet again 

Answer:enter administrator password or power on password hp tablet ...

Please try: 77485978  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

2 more replies
Relevance 53.3%

I've tried just about everything, removing the bios battery and all that and it still pops up prompting me for a password. Can anyone help me out? After three wrong password attempts it locks out to a message saying "System Disabled [51249457]" Thanks in advanced.











Solved!
View Solution.

Answer:Enter Administrator Password or Power On Password (System di...

@iToa5t? Enter     44121499 Regards, DP-K

4 more replies
Relevance 53.3%

Recovery Bios Password COMPAQ PRESARIO CQ61 Operating System: Microsoft Windows 10 (64-bit) Hello, I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the bios password. The message that appear is "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD". What can i do? After failing 3 times I get the message "System Disabled" and the code 59329588











Solved!
View Solution.

Answer:Error ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD

Please try - 46081508      Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

3 more replies
Relevance 53.3%

I need help Spoiler (Highlight to read)Spoiler (Highlight to read)Spoiler (Highlight to read)error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 











Solved!
View Solution.

Answer:enter administrator password or power on password system dis...

@AbdallhHussein? Enter     75631538 Regards, DP-K

4 more replies
Relevance 53.3%

I Home School both my children and I currently only have  1Laptop to use and need the one that my 4 year old turned off and now its asking me for the adminstrative or Power on password? This Has CREATED A Huge problem My computer is asking me for a Power On Password/Admin Password. I Don't Remember this password or where I would have written it down. Is There another way to access my system without taking it in and it costing me a ton of money for someone to do something as simple as Inputting a simple pass key or something ? Please someone anyone help me if you can.... Thanks So Much THIS IS THE CODE IT IS GIVEN ME after 3 Failed attempts******52199612******











Solved!
View Solution.

Answer:enter administration password or power on password error Wit...

OH MY GOODNESS !!!You are my life saver thanks so very muchThat (I'm sure you already know worked)Thank You Thank YouG_B_Y_

3 more replies
Relevance 53.3%

Get error message "Enter Administrator Password or Power On Password"Have tried multiple codes from online support and hasn't worked. 

Answer:Enter Administrator Password or Power On Password error

Hi: You can't try any of the BIOS codes posted on the forum for your notebook. You have to enter your 8 digit system disabled code in the box at the link below, to generate an unlock code. You should get a system disabled code after entering any BIOS password 3 times. https://bios-pw.org/ If you get an alphanumeric code, you will have to contact HP for assistance. 

1 more replies