Computer Support Forum

Recovery partition lost on Satellite C870D

Question: Recovery partition lost on Satellite C870D

Need to run recovery procedure but lost the partition on the HD. Since the product key is stored in BIOS/UEFI i wonder if i can use the iso provided by Microsoft 8.1 + drivers posted on Toshiba site.
Is this possible or must i purchase the recovery disks from Toshiba?
The OS mentioned there is Win 8 RTM 64-bit

Relevance 100%
Preferred Solution: Recovery partition lost on Satellite C870D

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Recovery partition lost on Satellite C870D

Yes you can use iso file and drivers offered on Toshiba download page but you cannot use product key for activation. As far as i know this key belongs to original recovery image that you got with your machine.

1 more replies
Relevance 79.95%

I had two partitions at my HD (Satellite L30-114).

I used the Toshiba recovery Cd to restore windows at my laptop. The CD did not offered me any Full or Expert modes as written here http://support.toshiba-tro.de/kb0/FAQ350072001GR01.htm It just recovered without any input from my side!

After recovery, Windows does not see my second partition. I used disk management utility and it says there are 17 GB of unassigned disk space (this is my second Partition!).

Can and how can I restore it?

Tx a lot!

Answer:Partition lost after recovery - Satellite L30

Hi

It seems that the L30 was delivered with a new version of recovery cd.
I think the Recovery procedure is a little bit different as the old one with the 2 different recovery modes (standard and expert)

I know a little bit about the new recovery procedure because a friend of mine bought a new Satellite with this recovery CD. He asked me for the notebook installation and we have checked it.

It seems that you have to press the ?Setting? button after choosing the language.
If you don?t use the ?setting? button for the configuration so the recovery procedure will delete and erase everything on the HDD. I think you didn?t configure the settings and therefore all partitions were deleted.

Unfortunately I think there is no much to do. You partition was deleted and it?s not possible to bring back the lost data.

3 more replies
Relevance 79.13%

I have satellite A300 with pre loaded Vista home premium OS, due to some reason I had to format the entire disk and I lost my OS recovery partition.

Can any one help me in getting my os partition?
I had checked with the service centers they said I can use the OS recovery partition of similar model.

So I request everyone if anyone can provide me the OS partition, I would be thankful to them.

Please contact me at [email protected]

regards
anup

Answer:Satellite A300 - I lost the recovery partition

Hi!

I think you did understand something wrong.
On the Toshiba notebooks there is no recovery partition, they have a HDDrecovery folder that contains the factory settings.
I recovery partition that you mean is a Window Vista feature, not a Toshiba.
Here is a useful link to this: http://en.wikipedia.org/wiki/WinRE

The HDD recovery folder is stored on the second partition of the notebook. You can use the HDD recovery function if you go in the advanced boot menu, choose ?Repair my computer? and select the Toshiba HDD recovery function.
But I think this is too late now?

Did you burn the Toshiba recovery disk? Normally you can burn the factory image that is stored in the HDD recovery folder on a DVD by using the Toshiba recovery disk creator. Therefore you get always a remember message or popup that you have to do this.

If you didn?t do this and you want the Toshiba recovery disk you must order a new one. You can do this here: https://backupmedia.toshiba.eu/landing.aspx

I hope I could help you. Do you have more questions?

Bye

2 more replies
Relevance 79.13%

EDIT:
Thanks to a recovery software I have saved the "HDD RECOVERY" folder an all the other files that were in D:(the damaged partition) into another folder in C:

Now how can I burn a recovery cd/dvd starting by this folder ?


--------------
I've the Satellite A300-21w that came with a 320 GB HD splitted in 2 partitions: C: & D an Vista Home premium:
The D: partition containing the "HDD RECOVERY" folder was accidentally damaged by me and now the system only view the C: partition !
I've tried to run the Toshiba Recovery Disc Creator but it shows the message: can't find the "hdd recovery" folder.
How can I reboot my laptop?

Message was edited by: melauf00

Answer:Satellite A300 - Recovery partition is lost

Thanks to a recovery file software now I' ve copied the "HDD REcovery" directory with all the other hidden files in D: in a folder in C:

Now...how I can burn a recovery cd/dvd with that folder ???

3 more replies
Relevance 79.13%

G'day alll,

Been out of the game for a while, got a Toshiba Satellite P850
I thought id set it back to factory default so hit zero key.

Came up with option wipe hdd, Toshiba recovery wizard.

I thought great it will wiped the hdd then let me use the hidden partition to reinstall the fresh copy of windows8 that came with it.

Now I get on boot up
Reboot & select proper boot device or insert boot media in selected boot device and pre any key.

Im gob smacked that its own Toshiba recovery wizard would wipe it own recovery partiton ....

so now have no recovery partiton as im aware as holding the zero key down keeps coming up with the above..

think i made a big boboo.

Looking for best way & eaiest way to solve this?
cheers macka.

Ive tried using my hiren & bootcd but wont even pick them up after chaning boot order in bios to cd drive first etc.

just keeps going back to
Reboot & select proper boot device or insert boot media in selected boot device and pre any key.

any help will be appreciated.
cheers again Macka. Am i missing something???

Answer:Lost recovery partition on Satellite P850

Your biggest mistake was that you didn?t create recovery media using preinstalled recovery media creator tool. With this recovery media (DVD or USB stick) you will be able now to install original recovery image. It is also described in user?s manuals document. Such back-up is very important.

Problem is that you cannot force your notebook to have access or install recovery image, if it is still saved on HDD. Now you can either install own OS version using Microsoft installation disc or order original Toshiba recovery disc for recovery image installation.

I don't know where do you live but if you have European notebook model you can order it on https://backupmedia.toshiba.eu/landing.aspx

3 more replies
Relevance 79.13%

Hello

I wanted to Format My computer.
I Restart My computer then Pressed on 0, and then choose the system configuration then Formate hard disk.

when I Restart My computer then Pressed on 0 Again , It Did not work


I did "nt find find operating system!

How do I recover operating system?

Thanks

Answer:I lost recovery partition on Satellite C50-B863

Hi imksa

You have a problem now. Obviously you have formatted whole HDD and also deleted saved recovery image on recovery partition. This can be done if you have already created recovery media (USB or DVD).

I presume you don't have such recovery media, right?

4 more replies
Relevance 77.49%

Hello

I really appreciate if you can provide me with the Windows License for My Laptop since the windows Recovery Partition was Formatted by Mistake

here is the laptop specs

Satellite L850-B757
Part Number : PSKG8V-05M002AR
thanks for your support

Anas Shamasneh

Answer:Lost Windows Recovery Partition - Satellite L850-B757

Essential recovery medium can be ordered here:
http://backupmedia.toshiba.eu/

3 more replies
Relevance 67.24%

Hi, I cannot find my original x60 tablet cds. And I am installing win xp pro now on a new hd I just put in. I'd like keep a partition for recovery (like the original one in system). Can I just make a separate partition in xp installation? How big should I give to it? And how should I make partitions if I want to install multiple OS? (XP and Vista) with recovery for both? Thanks!Message Edited by saja on 01-01-2009 07:24 AM

Answer:lost my original x60 cds, how to reserve a partition for recovery partition?

you can't reserve a recovery partition in the normal sense if you don't have the Lenovo recovery media. If you want to do a dual boot you will have to partition your hdd into two drives.  You can partition your hdd by using an aftermarket software like PartitionMagic, etc.  

2 more replies
Relevance 66.83%

I bought lenovo thinkpad X230 in January 2013. I made a recovery USB on a 16 GB pendrive. I bought a windows 8 pro upgrade offer as well. But i did not install it at that time and kept it for future use.  About a week ago I installed windwos 8 on my system in dual boot mode making a partition on primary HDD.everything went ok with only problem that my windows 8 did not activate. I was ok with that. But when i tried F11 recovery function, it was not working. So i tried factory reset through recovery USB i created earlier. It opened up and said BOOTMGR missing. Later with some research I realized that i didnt make USB active (bootable) before burning it.(Though this is ridiculous considering, tools provided must have done that. Like when you make windows bootable.) With all this(and me panicking), I tried backing up my data with image i created through R & R tool. After back up, I lost my recovery partition on HDD. And I guess i accidentally deleted System_DRV partition as well.  Though my computer is running fine. I need a bootable media. it would be great if you can provide it. Also if you can restore my comp to factory setting with recovery partition, it would be great.Please help me. Thanks in advance.













Solved!

Go to Solution.

Answer:Thinkpad X230- No recovery partition, lost System_DRV and have no recovery media

Hi, You can make bootable media (CD, USB stick or USB HDD) for using with your Factory Recovery Data USB stick.Just launch Lenovo Factory Recovery Disks app from Control Panel, deselect Data media creation, select needed Boot media type. Note you'll need less then 300 mb free space on media.

3 more replies
Relevance 66.83%

I installed Ubuntu GNU/Linux in my 3000 N100 0768GZQ laptop and deleted the partition in which i had installed Vista using fdisk. However, fdisk also deleted the Lenovo rescue and recovery partition. Not realizing this i created 2 new partitions in the free space. Now I want to install Vista in one of these partitions and I don't have a Lenovo Rescue and Recovery drive or the recovery CDs. Please help me.

Answer:Lost Lenovo Rescue and recovery partition in 3000 N100 0768GZQ have no recovery disks, please help

You can either get a hold of Vista installation disks and install it manually, or call Lenovo support and ask for recovery disks. They may charge you for the disks as you are supposed to create your own recovery disks.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

1 more replies
Relevance 65.6%

COULD NOT FIND RECOVERY ENVIRONMENT
(I know it's a redundant thread but I think I'm having a different scenario)
Specs: (nothing's changed except I did reinstall win8.1)
- win8.1 x64 single languange
- 1TB HDD
■THE SCENARIO■
There was a time when I want to resize my drive C to smaller partition:
I used Easus Partion Manager to do so (to dumb I was). After rebooting my system could not start
The BSOD showed up:
RECOVERY
PC needs repair (blah3x)
Error code: 0x000225
I was able to manage to repair and I came back up fine using a tutorial in youtube
using bcdboot C:\Windows /s (any drive letter): /s uefi
At this point, I downloaded a new copy of windows8.1 SL, thru "mediacreationtool" (as a legit copy i suppose)
and then I reinstalled using the ISO from MS, now I'm totally OK, at least at the moment.

■THE ISSUE■
Seems like everything's working as it is now, but as soon as I try to press F9 upon boot up, same error popup
Error Code: 0x000225, and again I got used to doing the bcdboot method.
NOW, this "Restore" partition the size of 20GB, and appeared and it had something in it (some files I think).

This wasn't there before and after reinstallation of win8.1 SL. IT ONLY appeared when I pressed F9 then I repaired
it using bcdboot.

■MISSION IMPOSSIBLE■
If there's a way that I could restore my notebook pc back to day one: Or am i that close? (close enough)
If this could be fixed? I know its risky but I will take it as a n... Read more

Answer:Unable to fix recovery partition ASUS / Lost recovery

So Im not entirely certain on what you are asking here. Your computer is unusable right now, or you cant get the recovery partition to work correctly?

10 more replies
Relevance 65.6%

Hello,

Before ordering dvd recovery of this notebook because it has not been established at the startup and the partition on the HDD no longer exists, I have a question that concerns me greatly.

Windows 8 key for the installation and activation of it is integrated it on dvd that we order?
For I find no Windows 8 key on the laptop or documents delivered with it.

Otherwise where normally located this key?
Because I did not want to order a dvd if I have to buy a Windows 8.
Thank you in advance for your future clarification.

Answer:Windows key for Satellite C870D-11L

>Windows 8 key for the installation and activation of it is integrated it on dvd that we order?
Yes. When you install original recovery image designed for your notebook model you will have legal and activated OS version.
>For I find no Windows 8 key on the laptop or documents delivered with it.
You don't need it. It is implemented into recovery image. You can install original recovery image 100 times and every time it will be properly activated and you will have valid OS version.
>Otherwise where normally located this key?
>Because I did not want to order a dvd if I have to buy a Windows 8.
If you don't want to use original recovery installation disc you can use Microsoft installation disc but in this case Toshiba has nothing to do with activation. Valid product key you must obtain from Microsoft.

If you have more questions you are welcome.

3 more replies
Relevance 64.78%

I have a Satellite C870D-11X running Windows 8.1.

The laptop was running progressively more slowly but now when I start it up it sticks on the "Toshiba Leading Innovation" screen. Eventually it moves to a blue screen saying your computer needs repairing "a required device cannot be accessed error code 0xc 0000185. I have tried a reset by pressing "0" at start up and I see the screen Hard drive recovery process and press enter for yes and I get the "Toshiba Leading innovation" screen with please wait. After the circular dots appear for a few moments then the screen goes blank.

Unfortunately I do not have a Recovery Disk to try that option. Am I looking at a hard drive failure? I can hear a feint clicking sound from the HD as though it is hunting for something.

If I buy a disk is it likely that I will be able to reinstall using this media?
Many thanks for any suggestions.

Answer:Start-up issues with Satellite C870D-11X

At first I must say that you have made one mistake after you bought your notebook ? you didn?t create recovery disc or so called recovery media with original Windows 8 version that you got with your machine.
I really don't understand why so many people make this mistake and don't make recovery image backup creation bootable recovery installation media.

Anyway, on this virtual way it is not easy to say what is wrong there and, in my opinion, best thing you can do is to back-up all your important data and install original recovery image. After doing this you can test functionality with ?factory settings?.

Few days ago I found interesting document about limited recovery options after Win8.1 update - http://aps2.toshiba-tro.de/kb0/TSB4403L30001R01.htm
You should try to install original HDD recovery anyway. How to do this you can read on http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm or http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm (Win8/8.1).
Recovery media order can be your last step.

Clicking noise could be sign that HDD is not working well anymore. Is the warranty for your machine still valid?

3 more replies
Relevance 64.78%

I Have the Problem that my Notebook only have a Blank Screen
Only if i press 0 it comes no Boot Media found
How will i come in Bios ??
it is a new Harddrive (SSD) installed
is there any File that must be on the Drive for Bios ???

Thanks

Simon Reinhardt

More replies
Relevance 64.78%

Hi all......can anybody help ..... how do I change the power up picture on this laptop...C870D-11X I recently downloaded the new Windows 10 and then started to receive random pictures before I logged into the computer, I was able to change these random pictures but I just left them to change themselves .....
however, now when I press the power up button I have a single picture of a Sloth which I have never installed....... is there a way to remove this particular power up picture to another picture...... It is not a desktop picture problem.... as a desktop picture is one that appears after logging into the laptop....... many thanks for your help in advance.

More replies
Relevance 64.78%

I have just reinstalled windows 8 on my Satellite C870D-11X and the touch pad will not operate the cursor (a plug in mouse works OK).

I assume that I need a driver. Can anyone point me to a site to download the appropriate driver?
Many thanks.

Answer:Need touchpad driver for Satellite C870D-11X

According notebook specification your machine was delivered with preinstalled WIN8 64bit.
Have you reinstalled this original OS version (recovery image)?

Original recovery image contains all necessary drivers, tools and utilities so everything should be OK.
Check please if your touchpad is enabled properly (FN+F5).

3 more replies
Relevance 64.78%

Hi

I hope you can help I bought my Satellite C870D about 4 weeks ago. This evening I went to start it up it came up with the usual "Toshiba Leading Innovation" screen it then goes to a black screen showing a blue dialogue box saying enter password. HELP what has happened the only software recently installed was NERO video last night. I am really stumped and have not been able to find any advice on this, I have tried to get into the BIOS using F2 & F12 but to no avail. Tried to contact customer support but closed.

Can anyone please help?
Many thanks is advance Ash

Answer:Satellite C870D - Boot up password

Is there someone else who have access to your notebook?
Fact is that your notebook is locked with BIOS password and, as far as I know, it cannot be set from alone.
Problem is that you cannot remove it now if you don?t know the right password.
In worst case you must contact nearest Toshiba service provider and they can remove it for you.

Sorry but it is a bit complicated now.

2 more replies
Relevance 64.78%

I changed the boot sequence in the BIOS so the optical device is referenced to start the system before the harddrive. The bad thing is that the CD drive is started but after 30 seconds the system on the harddrive takes over and starts Windows 10.
I need to create an full system backup in offline mode.
How do I make the labtop start from the CD drive?
Thanks for any help.

Answer:Satellite C870D-119 does not start from CD/DVD drive

What is on the CD?
If the CD is MSDOS or XP or Vista or Win7 based, you need to set the boot mode to CSM Boot.
If the CD has Win8 or Win10 then you boot in UEFI Boot mode.

2 more replies
Relevance 64.78%

Hello everyone, i had a little problems with my harddrive, when i started my pc it said "no bootable service" i knew how to fix it, but the problem is that you need to press f2 or del to enter BIOS mode, everytime i press f2 or delete the "no bootable service" message keeps repeating!
So my question is, does anyone can help me how to change the function keys, or enter BIOS mode in another way?

Greets, dmz

More replies
Relevance 64.78%

I cannot install Windows 7 pro on my Satellite C870D-122. I have deleted Win 8 from the disk, but when i tryed to install Win 7 i got the message:
Fil: \$WINDOWS.~BT\Windows\system32\winload.efi
Status: 0xc000000f

How can i fix this problem?

Answer:I cannot install Win7 Pro on my Satellite C870D-122

Power up the notebook and press F2 button to get into the BIOS.

Search and disable the option secure boot.

Additionally search for boot mode option and switch from UEFI to CSM mode.

Save the changes and exit the BIOS.

Now boot again from Win 7 disk to follow the installation.

1 more replies
Relevance 64.78%

Bonjours has all,

I bought a toshiba C870D-12k there is little but when I opened him(it), I had a problem with the grip HDMI of the computer, indeed a mask recovers her completely and it is impossible thus that
I connect my cable for the connected has my television..

On the box and the papers he is to mark that the computer possesses a grip HDMI and I thus want to know how to remove this mask to be able to take advantage completely of the hdmi

Thank you. and sorry for the spelling mistakes but I am not English and I do not write very well

Answer:Satellite C870D-12k problem Hdmi

Hi

It?s a little bit difficult to understand you but what I understood is; you?ve got a problem with HDMI. You cannot connect the notebook to LCD TV via HDMI cable. Is it correct?

Well, usually you need to connect both devices (notebook + TV) using an HDMI cable.
After that you have to press F4 button (FN + F4 if FN key mode isn?t enabled) to change the video output.

Be sure that you have chosen the right channel (hdmi port) in your TV settings.

5 more replies
Relevance 64.78%

Hi

My Satellite won't boot (windows 8) anymore, and I'm also not able to reset to factory settings.
The harddisk is still ok if I put it in another PC I can see all the partitions.

Does anyone sees something wrong in the partition type or properties?


Thanks in advance for any help.

Kindest regards


+Message was edited: part of the message has been removed+

Answer:Satellite C870D-12F won't boot Win8

> My Satellite won't boot (windows 8) anymore, and I'm also not able to reset to factory settings.
Why you are not able to reset your notebook to factory settings?
Can you enter Windows 8 Recovery & Repair options?

6 more replies
Relevance 64.78%

Hi out there,

I own a Satellite C870D-105 Partnumber PSCA2E.
Does anyone know whether it is possible to upgrade my Win7 Home Premium to Win 8 Pro via the Windows Upgrade Assistant?

So far I haven't been successful and the part numbe does not appear in the compatibility matrix offered by Toshiba.

Is there any chance that this model will be included?
I bought it with the marketing promise that is possible to upgrade.

Have I been fooled?

Answer:Windows 8 Upgrade for Satellite C870D-105 possible?

Hi

Take a look here:
http://aps2.toshiba-tro.de/kb0/TSB2A03EU0000R05.htm

+Satellite L870/C875 PSCA2E, PSCA2V, PSCA2R+

The Satellite PSCA2E series is listed even if as a L870? so Win 8 Upgrade Assistnat should be working.

3 more replies
Relevance 64.78%

When I first got this product, before opening I thought that all the 500gb would go to the first partition, but then I saw that the recovery partition has half of the 500gb just for recovery which is unnessecery.

But I had no problem with this at the time, and used the recovery partition(after saving to a disk) for ubuntu so I could have a dual boot.

But now I've came to realise that the games I'm downloading are taking more and more room up on my C drive. The problem I have is that I can shrink my recovery partition and enlarge the C drive.

Does anyone know a work around?

Answer:Satellite Pro C660-225: Shrinking recovery partition englarge C partition

You will need an 3rd party software to shrink the recovery partition and to add the free space the existing C partition.
I would recommend you an freeware tool called Gparted

But before you would start doing this, create a recovery disk!
This is advisable in case you would try to set the notebook back to factory settings using such disk.

1 more replies
Relevance 64.37%

My daughter managed to wreck Vista on her laptop. Trouble now is, that she can't find her recovery disk, and formatted the whole c: drive. Is there any way she can get the Os from somewhere, as she still has her serial number..good job it's stuck to the bottom of the lappy.

Answer:Re: lost recovery disc and recovery partition

As I see, you have no more options as :

1 Order [Recovery disk|https://backupmedia.toshiba.eu/landing.aspx] from Toshiba for money and wait for 2 weeks
2 Get Windows copy to install. All Toshiba drivers/utilities you can download from [Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
If you need assistance in driver installation order, can help you

The product key she has belongs to original recovery image you got with your notebook and it is not some ?universal key? that you can use with every OS installation.

Message was edited by: Jeka-??

2 more replies
Relevance 64.37%

Which version of windows 8 is preinstalled on Satellite C870D-11X laptop? Is it the pro version?
Many thanks.

Answer:Which version of Win8 is preinstalled on Satellite C870D-11X?

In notebook specification is only written Windows 8 64bit.
If you have this notebook open control panel > System and there you will find basic information about your notebook. Check info about preinstalled Windows Edition.

4 more replies
Relevance 64.37%

Hi,
can anyone tell me whether the keyboards for the C870D series are all the same or whether there is a special for the C870D-11T, or with which is this identical?

More replies
Relevance 64.37%

Hi,

I'm really stuck here,
A few days ago my laptop (Satellite C870D-10T) started having issues with being slow and browsers started freezing.
Did virus checks then did a chkdisk and afterwards the real problems started.

When i tried to reboot i would get the message start up windows normally or startup (recommended), when choosing the startup repair it would start to load windows files and then stop after the windows logo and go to a black screen with curser.
Safe modes don't work either.

I must of retried over 50 times until i then opted for HDD recovery and restore to factory settings. After i did this i had a similar thing happenend.

first windows is loading files, windows logo ,,recovery wizard: choose language, then black screen with white cursor... occasionally i had the message error F3-F000-0001
Only on one occasion did it go a little further but quit after the same error message i believe.
Rebooting from disk also hasn't worked since the first time i did HDD recovery.

ANY HELP is much appreciated

greets

Answer:Satellite C870D-10T does not boot up - blinking cursor

Hi

I think the HDD is faulty.
The blinking cursor in the left upper corner is a typical sign of HDD malfunction.
I would recommend checking new HDD.

Also an RAM problem can be reason for such issues but I would recommend checking (replacing) the HDD firstly.

2 more replies
Relevance 63.55%

Hi all,

i recently bought a satellite c870d (uk) and in the last week or so every so often usually when browsing the internet or i go to change which window I'm looking at (for example flicking from internet explorer to the desktop) the computer will crash and bring up the blue screen of death saying your computer has experienced a problem and it says system service exception.

just wondered if anybody knows how i can fix it?
All the drivers are up to date from what im aware but im fed up of constantly loosing my work now as it doesnt save anything prior to the crash

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.2.9200.2.0.0.768.101
Locale ID: 2057

Extra information about the problem
BCCode: 3b
BCP1: 00000000C0000005
BCP2: 000000015D505000
BCP3: FFFFF8801CE2EFC0
BCP4: 0000000000000000
OS Version: 6_2_9200
Service Pack: 0_0
Product: 768_1
Bucket ID: 0x3B_win32k!SURFACE::bDeleteSurface

Message was edited by: markhamilton

just updated the display drivers but got the same problem again after 10 minutes of general usage, had internet explorer open and/ or chrome and went to change the window i was looking at and it crashed

Message was edited by: markhamilton

Answer:Satellite C870D - blue screen / reboot randomly

Hi

BSOD (blue screen of death) is mostly an result of serious software or hardware problems.
It might be an software compatibility problem or simply one of the hardware parts (RAM, motherboard) could be faulty.

I found some info about the BSOD *BCCode: 3b*

+Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION+
+The SYSTEM_SERVICE_EXCEPTION bug check has a value of 0x0000003B.+
+This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.+

_Cause_
+This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.+


So it seems that 0x3B errors are usually caused by faulty video card drivers.

2 more replies
Relevance 63.55%

Talk about confusing. Does anyone know how to get a Toshiba C660 working after the HDD has failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will the recovery disk ( if you purchase one from Toshiba ) rebuild the new HDD along with a new recovery partition and install windows 7 (original OS ) and accept the product key printed on the Windows License attached to the base of the laptop. I have read a number of suggestions but these have been deemed incorrect by others.

Surely Toshiba must have a way of sorting this problem.

Do they read these posts ?

Answer:Satellite L660-12Q - Would recovery disk rebuild the new HDD along with a new recovery partition

Hi buddy?

I don?t think that this is really complicated? I could find all info regarding the recovery procedure in the user manual?

The recovery disk has to be created at the first day of purchase? its recommended to create one in cases something would be wrong with the HDD.

The recovery disk contain an image?. Image is a package containing Win system, drivers, tools and all the stuff preinstalled on the notebook.
You purchased the notebook and the system was already activated so you don?t need the key placed at the bottom of the unit.
Furthermore the usage of recovery disk formats the whole HDD (partitions too) and set the notebook back to the same state like at the first day of purchase.

There is also another option to recover the notebook called HDD recovery. This HDD recovery does not need recovery disk. Usage of HDD recovery would format ONLY the C (system) partition.

2 more replies
Relevance 63.55%

I just purchased a brand new laptop and have realised that it didn't come with a recovery disc or a recovery partition on the hard drive.

Just wondering if my hard disc crashes how am i supposed to reinstall windows?
The laptop i bought is a Toshiba satellite L500 and is only a few weeks old.

If anyone could help on the subject would be very much appreciated.

Answer:Satellite L500 - No recovery disc or recovery partition - How to reinstall?

Hi

Normally if I buy a new notebook or other product I read the user manual firstly. So I would recommend that you should the same before you ask different questions.

The point is that you have to create a Toshiba recovery disk yourself. Therefore start the recovery disk creator that is preinstalled on your notebook and follow the screen instructions. I recommend a high quality DVD-R medium to create this disk.

Furthermore you can reinstall Windows using the HDD recovery option. On the second partition you can find this folder that contains an image of factory settings and you can start this feature if you go in advanced boot menu and select ?repair my computer?. This is not a special partition, only a folder where the image is stored.

HDD recovery procedure is the same as Toshiba recovery disk. You get back factory settings too but the recovery disk wipes the whole HDD. The HDD recovery only the first partition.

By the way: Normally you did get this message:
+Important INFORMATION+

+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+

+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
... Read more

2 more replies
Relevance 63.55%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 63.55%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 63.14%

I lost my HP recovery paritition, but I have the recovery.wim file, backed up on a network share. How would I put the recovery image back on to the HDD, and reimage it to my laptop?

More replies
Relevance 63.14%

Hey there I've a huge problem.I just wanted to setup win 64bit on my w500 instead of my 32bit system.So I used the Lenovo Recovery discs to start and play the 64bit on.Now Win is installed, but I lost a partition that i had before. And there were all my files saved.Is it possible to recover the partition and why is it gone? Pls help!  

Answer:After Recovery, Partition lost

uhoh!Boot with "Ultimate Boot CD" and take a peek.  (You can google for it). Sorry, I have no other advice I can think of.Rick





RickW500 4058-CTO WinXP

4 more replies
Relevance 63.14%

Hi all, New to the forum *Waves* I've recently formatted my hard drive and noticed i did a full wipe like a boss. i've had a few issues and went to recovery and nothing was there! After looking into it some more i noticed i formatted my HOLE hard drive. Is there anyone to get my windows 8 partition back? or request a copy of it somewhere? since the my Lenovo Z500 IdeaPad notebook doesn't come with a product key im not sure were to start. Any and all help would be appreciated.  

Answer:Lost Recovery Partition

hi Adikt2,
 
Welcome to Lenovo Community Forums!
 
I suggest you call Lenovo Technical Support in your location about how to obtain a copy of the recovery discs. (fees may apply).
 


Country or RegionProductLanguageTelephone numberHours of operation

United Kingdom
THINK-branded products
English
08705-500-900(Standard warranty support)
9 AM - 6 PM Monday - Friday
IDEA-branded andB, C, E, G, H, K, N, Q, V, Y Series Products
English
0844-249-1112 (5 pm from BT landlines)
9AM - 6PM Monday - Friday




 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 63.14%

I have a U430Touch, from which I accidentally overwrote the recovery and Windows 8.1 partitions.  Using recovery software, I have successfully been able to recover both the Windows 8.1 partition and the recovery partition (and backed up to external drive). Now my problem is I cannot boot into the recovery partition or the Windows partition.  I can only boot into a LiveUSB. Any ideas on getting either of these partitions to boot? 

Answer:Lost Recovery Partition

I've realized I also recovered LRS_ESP, the Lenovo Recover EFI system partition.  This was not recognized by the UEFI firmware, basically when I hit the "Novo" button and went to recover, it would just load the default boot loader.  This was because the GUID on the LRS_ESP partition was wrong. After correcting the GUID (per http://en.wikipedia.org/wiki/GUID_Partition_Table, at the bottom), the System Recovery option now attempts to boot into the recovery system but fails.  I get a blue Windows screen with a face and error code 0x000021a.  It is my understanding that this error is due to issues regarding the boot process for Windows, so it is perhaps related to the locations of the recovery files. Will keep updated in case this is useful for anyone.

1 more replies
Relevance 62.73%

When I press a key ONCE while holding ALTGR to get a @ for example, two @ appears. Like this @@. I only pressed ONCE. What's going on? It's the same with any key I press: @@??$$??{{[[]]}}\. Yeah every single one, except: \ (slash)

Thank you.

Answer:Satellite C870D-10X keyboard problem, when pressing ALTGR button

Hi

This is very strange? can you check if this keyboard issue happens using an external USB keyboard?

If the USB keyboard would work properly, then your issue is related to internal keyboard fault. In such case it needs to be replaced.

3 more replies
Relevance 62.73%

Dear all,

I delete all data in C:\ drive and I do a format c:\

I don't create a Recovery CD, and now I can't restore with F8, but I show that I have a recovery partition on D:\ drive.

Please, how can I restore it ?

Thanks in advance for your help.

Best regards,

TOSHIBA C670

Answer:Satellite C670 - formatted C:\ and no Recovery CD but recovery partition

Hi

Maybe this thread about a similar theme would be useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53952

If this is not helpful or if you will not be able to recover the notebook using the method mentioned there, then you will need to order the recover disk from here:
http://backupmedia.toshiba.eu/landing.aspx

3 more replies
Relevance 62.32%

I was running on Windows XP SP2 working fine for me. Last week when I connected to the internet while browsing may be some virus came into it and my Laptop (Acer Aspire 5050) start malfunctioning. I decided to install windows XP SP2 again, while installing it started formatting my hard drive without prompting for it in the mean while it got restarted and I lost my whole data. I again repartitioned it and install windows XP some how.

I have tried many softwares for recovering data like GetdataBack for NTFS, Badcopy and Ontrack.

Can any one tell me which is the best software for recovering lost data from HDD.
 

Answer:HDD Data Recovery from lost partition

After 2 installations, you are wasting your time trying to recover anything. It is all gone. Hopefully, you had everything backed up, right?
 

1 more replies
Relevance 62.32%

Hi guys!I have a T61. I bought it a year before without recovery cds .when I wanted to restore orginal factory from recovery hidden partition but failed. there was a problem "couldn't find convert.cmd. I looked for solution on many forums, they said the problem caused by bad files accessing. But i till could access files on the hidden partition by using some softwares. i made a rescue media cd and try with this way. the result, my hard drive formatted and the hidden partition gone.Please show me what i should have done?thanks!

Answer:T61 recovery hidden partition lost

Xin Chao  I live in Hoi An, Quang Nam and use a T61.Where do you live now? Is your problem fixed now?

2 more replies
Relevance 62.32%

I recently had problems with my MESH PC which resulted in the System restore being corrupted midway through a restore. Ended up doing a reinstall of XP from the recovery disc provided but since then I don not get the message "Press F10 fo Recovery" on boot. I can see a 2.44GB partition in system information as well as the primary partition.Anyone have any clues in getting the Recovery option back for future use.

Answer:"Lost" recovery Partition on a MESH PC

Have you got a clean install of XP now? If so, run windows update and ensure you have all necessary updates then get something like Drive Image or Ghost and you can create your own recovery partition.

9 more replies
Relevance 62.32%

I was running on Windows XP SP2 working fine for me. Last week when I connected to the internet while browsing may be some virus came into it and my Laptop (Acer Aspire 5050) start malfunctioning. I decided to install windows XP SP2 again, while installing it started formatting my hard drive without prompting for it in the mean while it got restarted and I lost my whole data. I again repartitioned it and install windows XP some how.

I have tried many softwares for recovering data like GetdataBack for NTFS, Badcopy and Ontrack.

Can any one tell me which is the best software for recovering lost data from HDD.
 

Answer:Data Recovery from lost Partition

Do not double-post.

http://forums.techguy.org/windows-nt-2000-xp/666204-hdd-data-recovery-lost-partition.html
 

1 more replies
Relevance 62.32%

hi,guys. I got a problem now, I install a free software a week ago, then when login the windows, always had a babylon 9 advertisement pop up at the right coner of the screen, so i use the anti -malware to remove it ,unfortunately it didn't workeven worse I lost the total data of q recovery  partition, my questions are how to remove the disturbing ad.  and how to back up the system.   thanks    

Answer:Lost data from recovery partition

First, some info:What anti-malware program are you using?Also, did you create restore disks when you first used the system?What free software did you download and install (the name of the program that keeps creating the ad)?I'm assuming that 'Q:' just doesn't show up in 'Computer', correct?Can you tell me what happens when you go into Start>Search for 'Computer Management'>Storage>Disk Management? Do you see 3 blue boxes in total, and is one of them labeled 'Lenovo Recovery'?Finally, what version of Windows are you using, and on what kind of Thinkpad?

9 more replies
Relevance 62.32%

hi All i am having a problem, my hdd just faild and is not working any more so i checked and cant be repaired, i want now to use my Second HDD to Recover Visata , but i never did make a copy of recovery dvd because i thought that Recovery disk that was showing is se[erate from C, any body have any ideal how can i download this 2 DVD or is posible to download on USB and recoverd from there,I have checked my Box ther is only one page cd printed and is explaining that you can create recovery DVD or you can use Partition Recovery HP to recovery your Llap top but now is to late.
please help or if you have link i will download

Answer:Lost recovery Partition DV9000

If you can't get into the Recovery Partition, HP offers a replacement. With the partition it takes about a half hour to restore the OEM to its original condition. If you have to order the replacement, count on eight hours plus all the restoring of backup and program replacement times.

3 more replies
Relevance 62.32%

Hi there,While trying to put Windows 8.1 Pro on my Yoga 2 Pro, it would seem that I managed to ruin the parititons and so have lost my recovery partiton. Of course, now I can't recover the Lenovo drivers or software that came preinstalled, and it seems not all of it is available for download separately from the Lenovo website. I've tried calling support in AU who has advised me that there is no recovery media available for the Yoga 2 Pro....Despite showing online at http://lenovorecovery.com - who do not ship to Australia. Is there anything I can do?

Answer:Lost Recovery Partition on Yoga 2 Pro

Dear BeauGiles
 
Welcome in Lenovo community
 
You can fill in your details to order a recovery CD, also you can contact the Lenovo authorized service center to get the recovery installed on your machine .
 
Also be informed that we can support you in any missing driver or software that is missing from you machine .
 
Let me know
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 62.32%

hi guys i use a lenovo 3000h series desktop and i have lost the rescue and recover partition due to an incorrect partitioning during suse linux installation i see that rescue and recovery software is available as download for lenovo j series 3000 desktops i wonder if i could download and use it pls help me people!!!!

Answer:lost my rescue and recovery partition

Rescue and Recovery is not supported with the Lenovo 3000 H Series products. The 3000 H Series systems came with a program called One Touch Recovery. One Touch Recovery is not available for download, but if you may be able to get assistance from the Lenovo Support Center.List of support phone numbers for Lenovo 3000 J Series desktops:http://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-63260

9 more replies
Relevance 62.32%

Through my own fault I lost the trcovery partition and thus my Windows & which came with my E325. Is there a way of getting it?

Answer:Lost recovery partition and thus windows 7

Hi Praguer,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that you are facing the issue with Windows recovery on ThinkPad E325.
 
Please try to perform the recovery from think vantage button in the system and follow onscreen instruction, if the think vantage button is not working then you have to purchase the recovery media.
 
However if it works then you can proceed with Think Vantage rescue and recovery.
 
Please click here to enter the link where you can get the steps for think vantage.
 
Hope this helps.
 
Best regards.

Hemanth Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 62.32%

I accidently deleted windows bootloader file. I Don't know how this happened but tried to recover my windows by DVD and its works But Now the problem is only Drive C is visible. Is there any way to recover other drives which are not visible now.??
I m attaching some Screenshots with this post..please help me..thanks

Answer:Lost my HDD partition after windows recovery.

Try downloading and installing Minitool Partition Wizard Home Edition (free) along with the ISO for standalone bootable CD and burn it to CD.

Then boot to the CD and use its "partition recovery wizard" to see what it makes of your hard drive. If the original partitions can be discovered and recovered, let it do it.

In the future, taking regular periodic "system image" backups to say an external USB 3.0 drive with Macrium Reflect (free) for at least your "boot drives" (i.e. "system reserved" where Boot Manager lives, and C where Windows lives) is the minimum backup protection you should be running.

f course you should also be backing up your irreplaceable data on C and other partitions regularly, so as not to be exposed to ANY type of unexpected disaster.

7 more replies
Relevance 62.32%

Hello, i have a problem with my HP 8460p Notebook. I accidentally deleted the Recovery Partition when i installed Windows 7 on the system. I tried a Recovery CD from my Workplace but that not worked the way i wanted. In the System Information Windows on the System Properties there should be the Name of the Laptop displayed. From what i unterstand therefore i need the Recovery Partition Backup. Is there a Way to download it? Does it maybe only help when i buy a HP Care Pack and send the Notebook to HP?  Thanks, Best Regards David

Answer:8460p Recovery Partition lost

@dave135 Hello;Allow me to welcome you to the HP forums! Sorry, but HP does not provide downloads for the Recovery Media; instead, you have to order a set of disks or a USB stick from them. I'm not in a position to answer your questions about the Care Packs -- and for those, you really need to contact HP Customer Support directly.  You can also order the Recovery Media from them. If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!If you have trouble finding a phone number, then try: 1 (800) 474-6836---------------------------------------However, HP Customer Support is generally not available on the weekends, so you might have to wait until Monday to contact them.---------------------------------------Good Luck

1 more replies
Relevance 61.5%

Hi Guys can I ask for a little help please
My Dell Vostro laptop was running Windows 7 (64 bit) professional but a few months ago I made a backup of the windows partition with True Image Plus 2013 as a back-up, I then upgraded to windows 8 all was working ok for a while but I decided Windows 8 was not for me and decided to use the true image backup I had made of windows 7.
I booted my computer with the true image boot cd and selected the relevant backup image file, all was ok until One second from completion and then true image said the restore had failed.
I then tried to boot my computer but the MBR was missing I then tried to use a Windows 7 system dvd to repair the MBR but it would not work.
I then found out that when the restore failed it had destroyed my windows partition and my factory recovery partition, and a partition I had my data stored on, so now I am unable to restore my computer with the factory restore option.
Fortunately I had made some rescue dvd and I have my computer working again but I would like the recovery partition back working if I can
I you look at the disk management screen shot I have attached you can see that I have a partition with a size 750.0 MB and 750MB free.
But now I am using Macrium to make my backups and when I run a back-up it reports that a partition is called Recovery and it is 750.0 MB with 212.0MB used and 537.0 MD free please see second screenshot
Can anyone tell me what?s going on and can I get the recovery partition to work again... Read more

Answer:Lost Dell factory recovery partition

The 750mb partition contains the files needed to boot windows. It is quite large because there may some oem tools on there as well.

You don't have an actual recovery partition containing the files needed to reinstall.

You can make one easily enough. It doesn't need to be a separate partition , you could use your data partition for that and still keep all your stuff on there.

I would use the latest installation media for that.

You can get it from here: Windows 7 Direct Download Links - HeiDoc.net

Or you could use what is on your recovery discs if you really want.

9 more replies
Relevance 61.5%

Long story short, whilst formatting an SD card in a USB slot my PC BSOD after 30 seconds and would not boot after restart, PC was running Win10ProX64 and the primary drive is a Samsung 840 Pro 250GB SSD.

I have tried recovering machine with the drive in situ as primary but I am unable to run startup repair/system restore/reset pc or any other option from a win10 usb installer, so I gave up on that and installed my working (tested on another machine) Macruim boot USB that also fails to load so I booted to command prompt and had a quick look through diskpart, originally the disk had one partition consuming the entire drive and im assuming it will have had the 450MB partition created by win 10 installer



At this point I removed the drive and attached to another machine running Win7
Disk management looks like this



Mini tool partition wizard looks like this



and Get Data Back looks like this



Have skimmed through folder structures and all looks intact, my original intention was to recover a few files and format but I am now wondering if it is possible to recover the drive as a whole but am not sure of the best way forwards, any advice gratefully received.

More replies
Relevance 61.5%

I purchased a new Motherboard to upgrade my computer and new SSD drive. I installed Windows 7 again on my new SSD. I had a 3TB Seagate Drive that had 3 partitions. One partition had Windows 7 and system files. The other two had data. Now, one of my data partitions shows as Unallocated. The old Windows 7 partition is totally accessible as well as one data partition. I need to recover the data on the drive from the unallocated partition. I've tried Seatools and EaseUs partition tool. I'm going to try DiscInternals next.

Does anyone have suggestions on recovering a partition that is now unallocated? I imagine the data is still there but the partition isn't being recognized by Windows 7.

Thanks

Answer:Lost Partition - Now Unallocated - Data Recovery

Try a simple partition undelete using Partition Wizard Partition Recovery Wizard - Video Help.

If that doesn't work try data recovery software.

Your data should always be backed up externally or to the cloud, using a modern method like Sync, Backup and Store your Files to the Cloud with Skydrive - Windows 7 Forums

1 more replies
Relevance 61.5%

Hi, this is my first post so any help will be greatly appreciated.

I have started using windows 8 now as my work PC and wanted to make a recovery drive, just in case.
I have a 128GB SSD (for the Win8 OS) and a 2TB HD for all my work files, videos, photos, music and so on.

I wanted to make a recovery drive so I went to Disk Management and created a small 32GB partition.

Then went onto Create a Recovery Drive. It did say that the drive would be cleared, but I presumed that it just meant that partition.

I now have 1.9TB of unallocated space (that im hoping my files are still on) but im worried anything i try might wipe it for good.

The main reason I think that the files are still there is that the 'formatting' took less than 5 seconds.

Thanks in advance!!!
 

Answer:Solved: Tried Recovery using Partition - Lost all files?

14 more replies
Relevance 61.5%

Hi
 
Completely my my fault, but I have deleted the hidden recovery partion on Ideapad S10e
 
Product Name: 4068RFG
Bios Version: 14CN66WW
Lenovo SN: 11Sxxxxxxxxxxxxxxxx
 
Just wondering if there is a USB key executable which it can boot off to restore available from Lenovo
 
Recovery CD does not work without this partition.
 
Many Thanks
 
Ben
 
 
Moderator Note; s/n edited for members own protection
 

Answer:Linux Recovery Partition on s10e lost

Hi and welcome...
the linux version (suse) comes with CD ... that installs Linux complete as i know...there is no recovery partition for linux ...
If you want Linux back ...i prefer other distris instead of old SLED...
Download on other computer one of these : Opensuse ...Mint 8 Ubuntu 8.04 (dont prefer9xx buggy) ...
and prepare on a bootable USB-Stick  ...
 
sincerely KalvinKlein
 

1 more replies
Relevance 61.5%

Hi. Few days ago i've got problem with my hard disc (it crashed ), so i've changed it for another. There were some problems with installation new windows xp, but already done, but ... how can I restore hidden partition with all stuff, without recovery cd's, or where can i get this cd's? Thank you for advice.

More replies
Relevance 61.5%

My DELL 8300 has a damaged hard drive that must be replaced. Problem is that the recovery data is on a partition on the dead drive. This 8300 came with no recovery or OS discs when it was new. DELL Support says they cannot give or even sell me an OS or recovery disk because the machine is now out of warranty. Is there any way I could use a DELL OEM OS XP disk that belongs to one of my other DELLs on my 8300 after I install the new hard drive? I realize some of the drivers will be wrong, but I can handle doggin down the right ones.

Answer:Replace lost recovery partition on dead HDD

yes u can use DELL OEM OS XP disc. The disc will work on many systems (hp, acer etc.) the wrong drivers will not be installed.

5 more replies
Relevance 61.09%

 If I have two M series Thinkcentres having compatible machine types. Can I use a set of restore discs from the first Thinkcentre to factory install Windows XP onto a second Thinkcentre where the recovery partition and install drive became corrupted? Also do Thinkcentre applications and utilities install under a retail copy of Windows XP (installed onto a Thinkcentre)? e.g. Fingerprint reader software, Rescue and Recovery, Client Security, etc.   













Solved!

Go to Solution.

Answer:Windows XP restore discs & lost recovery partition

Yes, if the model is the same (same first 4 digits) you can use the recovery discs on the second machine. You will load the disks, and then when that process is finished, you will select F11 at boot and then restore to factory state once the Windows Recovery loads. No Thinkcentre specific applications will load with a retail copy of Windows. You will have to go to the Lenovo download pages and install the apps individually.

2 more replies
Relevance 61.09%

Hello

I have sony vaio core i5, Model VPCEB4B4E, windows 7 home premium 32 bit. I bought it from italy, i lost its recovery participation. and formatted my hard disk completely. i also do not have its recovery disk. i called vaio service center they told that you have to buy recovery disk for almost 50 EUROS. I do not wanna buy it. any body can tell me that where from i can download the recovery disk of this model. or if any person have the same model. please contact me. and reply me it is very important.

Greetings in advance

Asif

Answer:Sony Vaio VPCEB4B4E. I lost my recovery Partition. Need Help

   Information
We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create



Did you make the OEM manufacturer's Recovery Disks?

How to make Sony Recovery Disks:
View Document

How to use Sony Recovery:
View Document

How to use Sony Hardware Diagostics:
View Document

How to order Sony Recovery disks:
1.Go to http://servicesales.sel.sony.com.
2.Enter your computer's model number (for example, PCV-XXXX), and click List Parts and accessories.
3.Follow the online instructions to order the Recovery Media Kit.
If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at 1-800-488-7669.

2 more replies
Relevance 61.09%

hello how are you all im new here and i hope somebody can help me i lost my hidden xp rescue partition , but i have it on dvds as an image can i restore it again to my laptop R60e please help me with my best wishes to all thx

Answer:Please Help , i lost my hidden recovery partition but i have it on dvd image can i restore it???!!

If you run the discs it will completely reformat the drive and all information will be lost. The computer will be in the same condition as when it came out of the box. The hidden partition will be there again.Are you sure it is gone or do you just need to re-enable the restore function with this?





______________________________________________________T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.T400 2765-T7U Windows 7Registered Linux User #160145FYI: I am not employed by Lenovo

2 more replies
Relevance 61.09%

Product Name: Star Wars Special Edition Notebook - 15-an001nx (ENERGY STAR)Operating System: clean installation windows 10 home single language (64-bit) I lost my recovery partition and system when make factory reset so i install a clean installation windows 10 home single language (64-bit) by Media Creation tool and automatically activated when its done installingmy problem is star wars themes and HP software after download Star Wars Control Panel from HP Customer Support - Software and Driver Downloads not work "this system not support". my questions1- why HP didn't offer request System Recovery Kit for this model? like lots of star wars model i found it or can i request one of them for my model if they are same hardware?2- if this windows compatibility how can i fix "this system not support" for Star Wars Control Panel and another programs?3- if this windows not compatibility how can i get the compatibility windows?

More replies
Relevance 61.09%

I was trying to restore my Toshiba Sattelite L645-S4056 to factory default and reinstall windows 7 by inbuilt recovery system. While i was formatting the computer swtiched off itself. Then i couldnot access inbuilt recovery during booting. The computer wont boot with any windwos cd. It said something like "Cannot boot.Enter a bootable disc". I then installed a linux distero by booting with a USB device.The linux system works fine but i need windows 7. It shows that my hardisk is totally empty. There is no reserved part previously occupied by recovery system.I didn't get a recovery disc with my laptop. Any other dvd wont boot. How can i install back my Windows 7 ?? What is wrong with the system ?? Is there any way to get windows 7 back ?? Please Help ASAP...
Thank You in advance

Answer:Windows 7 wont boot. I lost recovery partition.

You need to access the system bios and tell it to boot from cd under boot options.
Some laptops also have a 'boot menu' feature that can be accessed by pressing a key.

3 more replies
Relevance 61.09%

I bought the machine in question from a friend and have used it for sometime. I would now like to restore it to its original factory state. Not having any installation discs for XP I wanted to use the recovery partition but I'm not sure if this is still on the hard drive or not. Looking in disc management there is the main partition labeled C: showing 74.44GB and also an un-named partition showing 55mb of total capacity with 48mb free space. i have tried to use ctr+f11 at start up according to the directions on Dells site for how to start the recovery process but that doesn't do anything and the machine continues to boot as normal.

So I need to know if this smaller partition is likely to be the recovery partition? Is there any way to look and see what data is stored on there? If ctrl+f11 is not working does that mean the factory restore option is no longer available on this machine or is there something else I can try? Maybe I just need to ask Dell to send me the recovery disc.

Thanks for reading :-)

Answer:Dell Optiplex 170L+XP Pro, Lost recovery partition?

I seem to remember that the Optiplex you have came with a set of discs. Windows install disc, Driver disc and software disc(s)That 55Mb partition is the not the recovery partition, it is the Diagnostic partition.The drive size you are showing for C: is the proper size for a 80Gb hard drive.You will need the right XP disk, and ahead of time download the drivers and utilities from the Dell site.BY Right XP Disc I mean either a Dell XP disc or a OEM XP disc that matches whichever version, XP Home or XP Pro, the license on the computer is. Maybe your friend still has the discs?Good LuckRoger

4 more replies
Relevance 61.09%

Accidentally deleted Recovery Partition and lost discs.Can I recover by downloading windows 7 somewhere using the product key found on the back of my laptop? I am a total newbie at this. If anyone could help with this, please send a link or any info that would help. Thanks!

Answer:Accidentally deleted Recovery Partition and lost disks

Yes, you can download an ISO and use the key off of the back of your laptop to activate it. Here is a source for the ISO:

Download Windows 7 ISOs, Legally and for Free | PCsteps.com

This will be a clean install, though. It won't have any of the laptop manufacturer's bloatware and utility programs on it. If you want all of that still, you'll have to contact the manufacturer and get replacement restore disks.

1 more replies
Relevance 61.09%

hi friends i have used a disk partitioning software to install linux onto my system and had made a terrible mistake ....i completely mistook the recovery partition and deleted the partition .......to my horror i lost my novo key recovery process.......please guys tell me how to recover the partition and get my novo key working ....i ll be greatly indebted to u for this....

Answer:re:lost recovery partition ,novo key ,lenovo 3000 y 410

hello any one there? please help me MARK

4 more replies
Relevance 61.09%

Hi guys,

Been doing my best to sort out a troublesome PC, and this forum kept coming up when googling, so thought you guys might be able to help out! Up for a challenge?

I have made some attempt myself using tutorials, but can't help but think I should have posted first... Anyway, what's done is done...

Setup: Win XP Pro (SP2) with three logical drives:
Physical Disk 1 (200GB SATA - NTFS): Logical Drive C: and D: (C: containing Windows)
Physical Disk 2 (IDE - FAT32 converted to NTFS): Logical F:
Physical Disk 3: (300GB SATA - NTFS) Logical G:

Long story short - some bad (new) RAM was causing my screen to BSOD and restart. Before I could properly diagnose that (it killed an audio driver, which continued the BSODs even after the RAM was removed), a BSOD restart killed one of my hard drives - G (Physical Disk 3). Windows would not boot with it plugged in (moaned about hal.dll missing, even though it's not the Windows drive - booted fine without it plugged in!), and from Windows Recovery Console it was dismissed as having "Unrecoverable Errors" when trying to DIR or CHKDSK.

On advice, I tried 'bootfix', which made it an empty 10GB drive, FAT format.

Loaded up TestDisk from the UBCD, which claimed it had one 'Linux' partition. I followed a tutorial to scan it in forced NTSC mode, but it came up with nothing.

I then used ADRC Data Recovery to write an NTFC boot sector, but all that did was make the drive unreadable.

Then used ... Read more

Answer:File Recovery On Lost Ntfs Drive/partition?

Each time that you access the disk (even during bootup) the chances of losing your data increase. So limit your disk accesses as much as possible.A data recovery program attempts to check the structure of the disk and see if it can find anything that it recognizes as files. Since you've already performed some of the tests that we'd recommend, I'd have to suggest that you consult a commercial firm that specializes in this sort of thing (and they are expensive!).Other things to try would be the NTFS GetDataBack tool from http://www.runtime.orgIt allows you to scan the drive (for free) to see if anything is recoverable, then you'll have to pay to do the actual recovery (about $80 US the last time I checked)Others here have recommended a free tool called Recuva, and other free tools may also be listed here: http://www.bleepingcomputer.com/forums/topic3616.html

6 more replies
Relevance 60.27%

Hello all,

I am trying to find ways to recover all of my important data from my hard drive which was not working suddenly.

After several attempts of recoveries, I have decided to buy a same HDD because it didn't even appear on disk management. And I replaced a board of that on my old drive and then I can see it on disk management.


Of course, I did click on cancel on disk initializing.

Then, I have used Partition Wizard tool to recover my data what I have discovered from this forum.


Actually, it is big numbers of sectors since capacity of hard drive is 1TB.

From this point,I have experienced that too low scanning rate (128 sectors/sec) was going there and it is hard to wait till the end. It will take about 176 days at that speed, approximately.







Is there any solution on this problem? What could be the reason of slow scanning speed?

Answer:HDD lost partition recovery related problem (Samsung HD103uj 1TB)

I have many comments to make on your dealing with this issue but will reserve it for a later moment since you are already on with the Full scan and so I shall catch on it for the moment.

I see the scan had gone upto 1920 sectors. Hold on till it reaches 2048 and beyond. The first partition will always (in most cases) start on 2048. Let us see whether it finds the partition at 2048.

Post a screenshot after it goes beyond 2048.

Let me know whether the scan is still on. Otherwise I shall go to sleep and return only after another ten hours and shall see the screenshot then. After posting the screenshot wait for half an hour.

If I am not seen in that half an hour cancel the scan and close Partition Wizard.
I shall continue tomorrow ( my tomorrow)

1 more replies
Relevance 60.27%

To help some people out... I read some of you formatted your drive and now are stuck without the ability to restore Win 8 if you went to Win 7 before you knew there was an issue, or lost your recovery partition for any other reason. FYI, if you can get your hands on ANY Win 8 disk (doesn't matter if its Professional or the Regular version) and install it, your serial key for Win 8 is hardcoded into your motherboard BIOS. Therefore, if you have access to a disk, you can simply install and it will auto activate and install your pre installed key. No need to spend $90 or more if you don't have to. If you don't have an external DVD Drive, simply download the Win7 to USB tool from Microsoft (it will work for Win 8) and transfer the disk image to a USB thumb drive (from another PC of course). Then boot from the thumb drive to install. Note: You will have to go into the BIOS to turn OFF UEFI and allow it to boot and install from a thumb drive. In my experience, I had to turn off UEFI in the BIOS (Get to BIOS by pressing F2 at boot). By turn off, I mean place in "Legacy" mode. Then save and exit and allow to restart. Upon restart, enter the BIOS once again and you should now see your thumb drive appear on the list of bootable devices (the thumb drive has to be connected BEFORE booting into BIOS). Move the thumb drive up the list to be the first boot device, save and exit and you are in business. Also, if you have access to the MSDN, you can actually download the R... Read more

Answer:Lenovo S405 How To: Re-Install Windows 8 if you have lost your recovery partition

This is very helpful and informative, thank you for posting!

5 more replies
Relevance 60.27%

After researching my issue and found this closed thread - "Windows 7 won't read drive in explorer" I started my own little research to my problem.

First some basics: I am running Windows Ultimate 32 bit. I have 2 SATA Hard Drives (one with OS), 2 SATA DVD and Blu-Ray Drives and 1 IDE Hard Drive which is configured as a slave.

Second - I needed to do some hard drive trouble shooting for another computer that had a (possibly) dead IDE Hard Drive. To do this I shut down my computer, and attached the (supposedly) dead IDE Hard Drive in its place.

Now - all the trouble began.

After booting into the Bios, I noticed the supposedly dead hard drive did not register even though it was spinning. I kept booting into the OS to see if it would be recognized in any case - it was not.

I put my working IDE Hard Drive back in - after shutting down and removing the dead IDE Hard Drive.

I booted back into the BIOS and noticed my good IDE Hard Drive wasn't being recognized either. I then went into advanced Bios settings and walla - it saw my hard drive but said I needed to reboot.

After rebooting I noticed the same thing with the Bios, but this time proceeded to boot into the OS.

After signing on, I noticed my Good Hard Drive was no longer recognized in Explorer.

I went into Administrator and Computer Management and then into Disk Management.

What I saw puzzled me as over the past 25 years I never have seen this. My good hard drive was showing up as Disk 0 and showe... Read more

Answer:lost my drive letter on Healthy (Active, Recovery Partition)

Go into control panel and change windows update settings
to something other than automatic,like download and notify.
That way you have a choice what to install.
Then run windows update manually.
Check the list of updates for a drive controller driver.
It sounds like it is installing one that isn't working for you.
It would probably be under optional updates.
You should be able to select hide update an click ok
so it won't try to install it anymore.
 

2 more replies
Relevance 60.27%

HI! i'm new in this forum's!I've ThinkPad R61e , i received him with Vista business , I wanted to install xp to him, but in same time I removed the partition of restoration of the configuration of origin, I présise which I did not receive with my laptop the DVD of Windows Vista!Now I would like to recover my Vista but what to make?Thank's for your help!

Answer:I lost ma recovery partition and my Windows Vista Business after installation of XP

You are supposed to make your own recovery discs before you remove the recovery partition. If by chance the recovery partition is still there you will need to run this tool to repair the F11 function.  It requires a USB floppy drive.Otherwise you will need to get a set of recovery discs from someone.Message Edited by carbon_unit on 05-19-2008 08:54 PM





______________________________________________________T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.T400 2765-T7U Windows 7Registered Linux User #160145FYI: I am not employed by Lenovo

8 more replies
Relevance 59.86%

Hi,

i have a toshiba Satellite A200-1c3 with Vista. I'm having this problem, my data keep getting deleted, Gigas of files in ?C:? simply disapear and i dont have the tinest clue why because i have good antivirus, firewall etc.

Its very annoying beacause important files just dissapear and i keep getting errors from programs files that just dissapear.
Its a new laptop and allredy having problems. Any suggestion how to solve this problem.

Fabio Gloria

Answer:Satellite A200-1C3: I lost my files on C partition

Hey buddy?, it?s very strange and mysterious issue? I?ve got a long experience in Windows and computer technology but believe me? the HDD files don?t disappear without any reasons?.

So either you have installed something which has deleted or removed the files or you have deleted it accidentally?

Did you try to set the OS to the early time point?
This procedure mostly helps to reset the settings or to get the early system state.

Check this? maybe it helps

1 more replies
Relevance 59.86%

Hello,

I have an Toshiba Satellite L 655-1DV and yesterday I (clear) installed windows 7- 32 bit and all the drivers.
My problem is that after the installation my partition (the one with the many gbs) hasn't been recognized from windows.

At Computer Management it says that I have 450GB
https://dl.dropboxusercontent.com/u/100247419/6655554.jpg

but I have only 31GB
https://dl.dropboxusercontent.com/u/100247419/ttttt.jpg.

How can I fix this problem?
Thank you in advance.

Answer:Satellite L655-1DV - lost partition after new Win 7 installation

Hi

How did you install the Windows 7 on the HDD?
Did you format the HDD during the setup procedure?

The Disk Management shows only one partition. That?s really strange because even if the HDD would be formatted, you should get at least two partitions (one small partition for Win 7 restore files and one bigger system partition C)

I think you should try to change the C partitions size within the Disk Management.
Click right on the partition and decrease the partition size. Then you could create new partition and could mark it active.

It would be very interesting to know how the partition would appear in Windows explorer.

3 more replies
Relevance 59.45%

Hi yoga family i got my yoga 2 13 just a week ago and so far i am happy with it,but have still some questions: i have this model of yoga;  OPERATING SYSTEMWindows 8.1 DISPLAY13.3" FHD, IPS, Multi-Touch PROCESSORIntel Core i3-4010U MEMORY8GB DDR3L STORAGE500GB HDD GRAPHICSIntel HD 4400 COMMUNICATIONWiFi, Bluetooth i have installed new 8.1 on it and formatted recovery partitions,but now i want to restore it to factory defaults,so i was thinking about asking from here,maybe someone can share yoga 2 13 recovery partition with me?  someone who has same model of yoga....and second strange thing,when i charge my yoga battery and got 100% charged,then it still shows charging,is it normal? thank you for everyone who answers.......

Answer:Lost Yoga 2 13 recovery partition,also battery shows charging even after 100% charged

It will be hard to exchange the 16 GB recovery partition,as I only know how to copy complete non-DOS partitions between physical drives.You're welcome to come to my country... The Windows indicator showing means it is still external powered, not necesseraly charging ...The meaning of the LEDs in and close to the power button are explained in more detail in the User Manual page 11  

2 more replies
Relevance 59.45%

Hi All,I have a Thinkpad X220T. It was purchased with Windows 7 and late last year I bought Windows 8 and installed it. Since then, I've had tons of issues with W8, where at this point, even after careful debugging and troubleshooting multiple reinstalls, Windows 8 will eventually reach a state in which it will not load or have other critical issues in the desktop. What I realized is that the W8 installed also corrupted the W7 install so I have no way to restore it - trying to load it from BIOS or Windows 9 would occur in an error. After a few more W8 installs, the W7 restore partition was actually deleted completely - I'm not clear when this happened - I've had to reinstall Windows 8 at least 6 different times trying to recover my fatal issues in the last 8 months. Now I'd like to know if there's anyway for Lenovo to help me restore the partition or provide the serial number so I can download the ISO and install my machine copy of Windows 7 again. I don't really need the serial, the partition is preferred so I always have a backup.

More replies
Relevance 59.45%

This doesn't seem right.. I used Thinkvantage tools to make recovery discs.  Also in this tool was the option to recover the space of the recovery partition and add it to the overall C-drive space.  Unfortunately, now that I've made (and boot-tested) the recovery discs, I can't get back into the recovery disc tool to make use of the partition.  Is there any other way to run the recovery partition removal tool, or will I have to do it manually?  













Solved!

Go to Solution.

Answer:Option to delete recovery partition is lost after recover discs are made.

what os are you using in win. 7 you can do it with disk management





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

2 more replies
Relevance 59.45%

I am going to format and reinstall XP on my Toshiba satellite M70 via recovery CD.
It has 40 GB hard disk. I want to ask is there an option in the recovery CD to partition my HD before installing OS, just as we can do via XP CD?

Thanks foe any help.

Answer:Satellite M70: How to partition the HDD via recovery CD?

Hi,

A possible for a Partition with the recovery CD!
Used the Expert Modus and used Ghost and create the desired size from the Partition.

By

5 more replies
Relevance 59.04%

Hi

I'm trying to reinstall Windows XP on my Satellite A10 but I lost the recovery CD.
I got a "normal" Windows XP installation CD I'm trying to use to reinstall but the installation won't take the serial number on the botton of my laptop....

Do you know what's a workaround for this?
And in last instance how to get a copy of the installation CDs.....

Best Regards

Meme

Answer:Satellite A10: I lost Recovery CD - How to get one?

The key which can be found on the bottom of the unit is only an OEM key.
This means that it works only with the OEM version which were preinstalled and delivered together with the notebook. Simply said, you cannot use this key with other Windows OS.

If you want to reinstall the OS from the original Windows CD then you have to use the key which belongs to this CD!

At the other hand you can order a new recovery CD from the ASP in your country.
Just contact the guys. They could help you to order it.

Bye

2 more replies
Relevance 59.04%

Hi there,

I lost my recovery cd from my Toshiba M70-122. Does anybody know's how I can obtain it again..?

Jeroen

Answer:Satellite M70 - Lost recovery CD

Hi!

You can go to your local ASP (authorized service provider) and ask for a new one.

Or you order a new one from Toshiba directly.
https://backupmedia.toshiba.eu/landing.aspx

Bye

2 more replies
Relevance 58.63%

Hello,
I have a laptop Toshiba s / n xc366424r
The hard drive is dead, can not restore it with the partition recovery.
Change the hard drive is not difficult, nor reinstall windows. But how to recreate the partition recovery, and backup the system on the new hard drive?
Will the windows license installed on the old hard drive still be operational with the new hard drive?
Thank you for your answers.
Regards,

More replies
Relevance 58.63%

Hi everyone !
I have Toshiba Sattelite C660-1J9 laptop, and it's been working fine - until a day my HDD died. Now it's producing some weird sounds on startup, and no HDD visible in BIOS. It's not a problem for me to buy new HDD and replace it, but I'd like to restore licensed Windows I had with laptop - so I need to place recovery partition on new HDD somehow. Is it possible and where I can find this recovery partition image ?
Thanks in advance !

More replies
Relevance 58.63%

I want to use my toshiba recovery CD to insatll XP in one partition C of my HD, rather than installing it on HD as a single partition C. I have prtitioned my HD into 4( C, D, E and F) by GParted liev CD and my OS is now in C drive, no loss of data. Just I want to reinstall OS in C partition via recovery CD. T

here is an option for advanced users in recovery CD and it states that you can install OS into a single partition but I am not able to fighure out how.
Is there any help or tutorial available any where.
Thanks.
__________________
Toshiba Satellite M 70
Pentium M 1.73 512 15.4
XP Home SP2

Answer:Satellite M70: Installing XP on C partition via recovery CD

You probably have to use a program like parition manager to put the installation on only one partition.

5 more replies
Relevance 58.63%

Good evening everyone, I own a notebook Toshiba Satellite c50-a-1jm with Windows 8 preinstalled. Pursued to an upgrade, I could not more to access the PC. Therefore I tried to use the utility from Toshiba, but I deleted the entire hard disk and all partitions. Now I can not more to install any operating system. As the bios is dated, I can not set the boot as "Legacy". How do I install Windows 8? Thank you all in advance.

More replies
Relevance 58.63%

I've noticed that many Toshiba notebooks have hidden partition and DVD Recovery either. I don't have hidden partiotion, only Recovery DVD. Does it normal?

Answer:Satellite M70 - No hidden recovery partition

Yes it is normal. For this old notebook model Toshiba didn?t create ?recovery partition?. Satellite M70 is delivered with recovery DVD.

Newest notebook models are delivered without recovery DVD media but with recovery image saved on second partition and every notebook owner can create recovery CD/DVD alone.

4 more replies
Relevance 58.63%

Just bought an NB550D-109.
Pretty happy with it, but I do have a couple of questions though.
Is there a reason the recovery partition, labled Data, is half the size of the drive?

Can this partition be resized to give more storage without compromising the recovery wizard?

Are all the Toshiba utilities interdependant, or can the ones that I don't use be uninstalled?
Or should I leave them installed and just disable them from startup?

Answer:Satellite NB550D-109 - Recovery partition

> Is there a reason the recovery partition, labled Data, is half the size of the drive?
To be honest I don?t understand your question. Recovery partition is about 10 GB and recovery image is about 8GB so I don?t understand what do you mean with ?half the size of the drive?.
> Can this partition be resized to give more storage without compromising the recovery wizard?
At the moment I?m not able to give you proper answer. Open ?Disc management? option, make a screen shot and let us see the partitions structure. Then I will be able to discuss about all partitions.
At the moment I can say one thing only: do not change anything. Changing partitions structure HDD recovery installation can be cancelled.
> Are all the Toshiba utilities interdependant, or can the ones that I don't use be uninstalled?
Some of them can be uninstalled but I don?t know which of them you don?t need.
Let us know which of them you want to remove from the system.

One more thing: don?t make too many experiments before you have created recovery USB disc.
Please read Toshiba?s user?s manuals and pick up info about recovery installation and recovery USB disc creation.

1 more replies
Relevance 58.63%

I recently recover my laptop L650 using the hdd method. Then somehow now I only have one partition and the recovery partition is gone.

On the first day I got my laptop, I already burned the recovery DVD. So I still can do the recovery in the future.

However, I still want my recovery hdd partition back.

Is there any procedures I can follow to make a recovery partition?

Thanks.

Answer:Satellite L650: recovery partition is gone

You cannot ?install? recovery partition.
When you use HDD method for OS installation that means recovery partition exists already and after recovery procedure cannot be deleted or removed.

It can be just ?Hidden? and you will not see it in Windows Explorer.

When you use recovery DVD the same will happen again.

Open disc management and check if one partition with around 10GB will be listed there. It must be recovery partition.

2 more replies
Relevance 58.63%

I have a Sattelite L500/nb I purchased in december.
I attempted to perform a HD wipe and system recovery the other day and it seems the recovery partition has been corrupted.
On boot the system states error: F3-F100-0004 and then shuts down on 'ok'

Can I obtain recovery cd's for this system?

How do I fix this?

Answer:Re: Recovery partition/help Satellite L500

What country are you in?

You can order Recover Discs from the Toshiba website.

2 more replies
Relevance 58.63%

hello , i want ask about my recovery portition my laptop satellite L850 corei7 .
i got these pc about 3 years ago and my recovery partition was deleted by mistak and i found one partition about 1.46 gb it tiltled by healthy active recovery partition .my question is ,is these the recovery partition ? if its how can make it work agine ,and if not how can reback my recovery partition agine ....if it need to make an order in egypt how much it cost .. and thx in advence

Answer:Satellite L850 and recovery partition

This recovery partition belongs to OS itself and has nothing to do with Toshiba recovery partition. If the recovery partition is deleted you cannot get it back.
Only thing you can do is to reinstall recovery image and use notebook with “factory settings” again.

In my opinion only option for you now is to order original recovery installation media - https://backupmedia.toshiba.eu/landing.aspx

1 more replies
Relevance 58.63%

Hi All,

First, I have read tons of messages within this support site and then decided to open a thread.

My Notebook Model Nr: P35-S6112
Recovery DVD Code: TK143/PMAE00127012
Os: Windows Xp Home Edition

I am trying to re-install the sytem with two disk partitions but no chance. Recovery DVD (procedure) doesn't provide me any option to separate the hard disk in two different partitions as commonly known as C and D when re-installing the system.

Many support experts claim that during installation two install modes appears and (Expert Mode) allows the user to divide the hard disk in partitions.

Please let me explain how do I re-install.
A-) I simply put the recovery dvd in the drive and boot from dvd drive.

B-) First black screen comes and asks my confirmation to proceed for recovery (F1 means yes.)

C-) Then second screen appears with two warnings as decribed below.
1-) Ensure that the recovery CD/DVD is in the CD/DVD drive.
2-) Keep the CD/DVD in the drive until you are asked to rremove it.
To continue press (C). To abort press (A) ?

D-) Then I select (C) and recovery procedure starts without asking me if I wish to separate disk in different partitions. So, installation finishes and creates one whole C: drive.

I would like to know if this partioning feature is included in recovery DVD or should I pay for some additional software to separate my hard disk in two poor partitions?

Thanks in advance for your help.

Answer:How to partition the HDD using Recovery CD - Satellite P35-S6112

Hello

Recovery procedure for European notebook models is very well known to me but I believe you have an US notebook model. Unfortunately I didn?t saw how it works for US notebooks but I presume it must be similar to European models.

Anyway if you say that you can not use expert mode installation I believe you. If there is no way to use recovery media I recommend you to use Partition Magic software. It is very powerful software and using it you can manage HDD and create own partitions or change the capacity of already persisting partitions.

Good luck!

1 more replies
Relevance 58.63%

I want to create 2 partitions in my hdd but I have no idea how to do it. I have 80GB hard disk. I have recovery CD and I want to ask if anybody knows is this possible to do it by that recovery cd.

Thanks for any help!!!!!

Answer:How to create partition in Satellite 105 via recovery CD?

Hi nina,

Use the Expert Modus with the recovery CD.

You make a Partition with the recovery CD

- Choose ?Expert mode? pressing number two
- Click OK and press ENTER
- Choose LOCAL - DISK - FROM IMAGE
- Look in: must be selected to CD-ROM drive
In the middle window choose GHO file and press ENTER
- Using TAB button you must mark information about drive and so on and press ENTER
- Using TAB button mark again middle part of window (blue line) and with space bar activate ?New Size? box
- Put inside new partition size and press again ENTER button
- The question ?Proceed with disk load?? confirm with OK

or use the Partition Magic 8 this is a good and a simple Software for Partitions of the HDD.

I Hope this is a Help

By

2 more replies
Relevance 58.22%

hye guys, I have lost recovery disc and all partion including the one carried windows 7 I think that's called OEM partition is also erased...I tried calling service centre but they say we need to arrange the disc and it will take 7-10 working days  is there any other option like from somewhere I can DOWNLOAD it and make it work? rather waiting long time and see my lappy bein in dust   thank u













Solved!

Go to Solution.

Answer:Deleted OEM partition + lost recovery disc ideapad z580 + system crashed completely

hi, every oem partition is unique for a specific laptop, so you cannot find any image files on the internet, even if you do, it might turn you win7 or the other person's who put the image file on internet into a pirated win7. i think you have no choice but to turn you pc to the service for oem part installation. or you can find the factory default discs to reset your computer.  sorry mate, but oem partition problems are one of the worst

4 more replies
Relevance 58.22%

Hi guys,

I've got a Satellite L30 and need to completely reinstall Vista but I've lost my recovery CD

Please help

Answer:Satellite L30 - I lost the recovery disk

There should be a Recovery Partition on the Hard Disk.

Try holding down the Zero key when you turn on the laptop.

If the Recovery Console doesn't launch, try pressing F8 just after the Toshiba Splash Screen and enter the Recovery menu.

If that doesn't work, then you can order the Recovery Discs from Toshiba's website.

3 more replies