Computer Support Forum

Event ID 41 Error - Spontaneous Shutdown

Question: Event ID 41 Error - Spontaneous Shutdown

Hello. First of all, I didn't know where to post this so I chose Win7 because it's what I use.

OK so this problem started about a month ago, but now it's becoming more frequent than ever. What happens is, as I'm chilling on my desktop PC, it just shuts down spontaneously, and here's the thing, since I don't have a restart button, I can't restart it, the monitor goes black (no BSOD) and even if I hold the power button too long, it won't shutdown. The only way to shut it down is to remove the power supply cord (which of course could lead to corrupted hardware, data loss, etc).

Now this mostly happens when I play games with high demanding hardware. So for this reason, I'm monitoring the CPU heat and it seems fine. Max temp goes to about 51C. OK I am now gonna post dxdiag info so you can examine all my PC specs, if you need anything else, just say so.

Thank you very much in advance!


Code:
------------------
System Information
------------------
Time of this report: 1/7/2011, 03:11:27
Machine name: TONI7
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell
System Model: ixtreme M5120
BIOS: Default System BIOS
Processor: AMD Phenom(tm) 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 1661MB used, 14719MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: NVIDIA GeForce GT 230
Manufacturer: NVIDIA
Chip type: GeForce GT 230
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0603&SUBSYS_1058174B&REV_A2
Display Memory: 4068 MB
Dedicated Memory: 1508 MB
Shared Memory: 2559 MB
Current Mode: 1600 x 900 (32 bit) (85Hz)
Monitor Name: Generic Non-PnP Monitor
Monitor Model: unknown
Monitor Id:
Native Mode: unknown
Output Type: HD15
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0012.5896 (English)
Driver Version: 8.17.12.5896
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 7/9/2010 14:38:00, 12471400 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4543-11CF-F363-54301CC2C535}
Vendor ID: 0x10DE
Device ID: 0x0603
SubSys ID: 0x1058174B
Revision ID: 0x00A2
Driver Strong Name: oem25.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section003:8.17.12.5896:pci\ven_10de&dev_0603
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

-------------
Sound Devices
-------------
Description: Speakers (Realtek High Definition Audio)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10250155&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.5821 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 3/30/2009 01:15:50, 1746208 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Description: Realtek Digital Output (Realtek High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10250155&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.5821 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 3/30/2009 01:15:50, 1746208 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

---------------------
Sound Capture Devices
---------------------
Description: Stereo Mix (Realtek High Definition Audio)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.5821 (English)
Driver Attributes: Final Retail
Date and Size: 3/30/2009 01:15:50, 1746208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: FrontMic (Realtek High Definition Audio)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.5821 (English)
Driver Attributes: Final Retail
Date and Size: 3/30/2009 01:15:50, 1746208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

-------------------
DirectInput Devices
-------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Comfort Curve Keyboard 2000
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x045E, 0x00DD
FF Driver: n/a

Device Name: Logitech Cordless RumblePad 2
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC219
FF Driver: n/a

Device Name: IOI Smart Reader
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x0A48, 0x4001
FF Driver: n/a

Poll w/ Interrupt: No

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x1002, 0x4398
| Matching Device ID: usb\root_hub
| Upper Filters: seehcri
| Service: usbhub

----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro)
| Vendor/Product ID: 0x045E, 0x00DD
| Matching Device ID: hid\vid_045e&pid_00dd&mi_00
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ HID-compliant mouse
| Vendor/Product ID: 0x09DA, 0x000E
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD

------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 48.0 GB
Total Space: 119.7 GB
File System: NTFS
Model: WDC WD10EAVS-00D7B1 ATA Device

Drive: D:
Free Space: 50.7 GB
Total Space: 469.4 GB
File System: NTFS
Model: WDC WD10EAVS-00D7B1 ATA Device

Drive: L:
Free Space: 24.6 GB
Total Space: 349.7 GB
File System: NTFS
Model: WDC WD10EAVS-00D7B1 ATA Device

Drive: M:
Model: LYF DUNW1ABC9 SCSI CdRom Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes

Drive: F:
Model: CD-ROM Drive
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes

Drive: E:
Model: EJAPO AFO9M7OL SCSI CdRom Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes

--------------
System Devices
--------------
Name: AIY3AEZG IDE Controller
Device ID: PCI\VEN_1166&DEV_024A&SUBSYS_86052D94&REV_01\4&5D18F2DF&1
Driver: n/a

Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_7915&SUBSYS_01551025&REV_00\3&267A616A&0&28
Driver: n/a

Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4398&SUBSYS_01551025&REV_00\3&267A616A&0&91
Driver: n/a

Name: High Definition Audio Controller
Device ID: PCI\VEN_1002&DEV_4383&SUBSYS_01551025&REV_00\3&267A616A&0&A2
Driver: n/a

Name: NVIDIA GeForce GT 230
Device ID: PCI\VEN_10DE&DEV_0603&SUBSYS_1058174B&REV_A2\4&10558EE2&0&0010
Driver: n/a

Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_7914&SUBSYS_01551025&REV_00\3&267A616A&0&20
Driver: n/a

Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4397&SUBSYS_01551025&REV_00\3&267A616A&0&98
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1204&SUBSYS_00000000&REV_00\3&267A616A&0&C4
Driver: n/a

Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_7913&SUBSYS_01551025&REV_00\3&267A616A&0&10
Driver: n/a

Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4397&SUBSYS_01551025&REV_00\3&267A616A&0&90
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1203&SUBSYS_00000000&REV_00\3&267A616A&0&C3
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1002&DEV_7911&SUBSYS_01551025&REV_00\3&267A616A&0&00
Driver: n/a

Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_1002&DEV_4396&SUBSYS_01551025&REV_00\3&267A616A&0&9A
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1202&SUBSYS_00000000&REV_00\3&267A616A&0&C2
Driver: n/a

Name: PCI standard ISA bridge
Device ID: PCI\VEN_1002&DEV_439D&SUBSYS_01551025&REV_00\3&267A616A&0&A3
Driver: n/a

Name: 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_197B&DEV_2380&SUBSYS_01551025&REV_00\4&2E0C3773&0&0030
Driver: n/a

Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_1002&DEV_4396&SUBSYS_01551025&REV_00\3&267A616A&0&92
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1201&SUBSYS_00000000&REV_00\3&267A616A&0&C1
Driver: n/a

Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_1002&DEV_439C&SUBSYS_01551025&REV_00\3&267A616A&0&A1
Driver: n/a

Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_1002&DEV_4390&SUBSYS_01551025&REV_00\3&267A616A&0&88
Driver: n/a

Name: A3R6JX2W IDE Controller
Device ID: PCI\VEN_11AB&DEV_6140&SUBSYS_82412E29&REV_01\4&5D18F2DF&0
Driver: n/a

Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1200&SUBSYS_00000000&REV_00\3&267A616A&0&C0
Driver: n/a

Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4399&SUBSYS_01551025&REV_00\3&267A616A&0&A5
Driver: n/a

Name: ATI I/O Communications Processor SMBus Controller
Device ID: PCI\VEN_1002&DEV_4385&SUBSYS_01551025&REV_3A\3&267A616A&0&A0
Driver: n/a

Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_1002&DEV_7916&SUBSYS_01551025&REV_00\3&267A616A&0&30
Driver: n/a

Name: Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller
Device ID: PCI\VEN_11AB&DEV_436B&SUBSYS_01551025&REV_16\4&372C2DDA&0&0028
Driver: n/a

Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_1002&DEV_4398&SUBSYS_01551025&REV_00\3&267A616A&0&99
Driver: n/a

Name: ATI I/O Communications Processor PCI Bus Controller
Device ID: PCI\VEN_1002&DEV_4384&SUBSYS_00000000&REV_00\3&267A616A&0&A4
Driver: n/a

------------------
DirectShow Filters
------------------

DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7600.16385
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7600.16385
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7600.16385
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7600.16385
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7600.16385
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
Moonlight H.264 Video Decoder,0x00800100,2,1,h264dec.ax,0.09.0000.50208
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7600.16385
MPC - Mpeg Source (Gabest),0x00400000,0,0,MpegSplitter.ax,1.03.1458.0000
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7600.16385
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7600.16385
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7600.16385
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7600.16385
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7600.16385
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7600.16385
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7600.16385
DvPlayTee,0x00200000,1,2,DXDVSupport.dll,4.00.0000.0000
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7600.16385
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16385
DivX for Blizzard Decoder Filter,0x00800000,1,1,blizzard.ax,5.00.0002.0000
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7600.16385
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7600.16385
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7600.16385
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7600.16385
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7600.16385
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16385
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7600.16385
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7600.16385
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7600.16385
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7600.16385
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7600.16385
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16385
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7600.16385
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7600.16385
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7600.16385
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7600.16385
VFW Sample Grabber,0x00200000,1,1,V0400Vfw.dll,1.00.0001.6784
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7600.16385
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7600.16385
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7600.16385
File writer,0x00200000,1,0,qcap.dll,6.06.7600.16385
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7600.16385
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7600.16385
Adobe PSI Parser,0x00200000,0,0,PSIParser.dll,
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7600.16385
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7600.16385
VFW Null Render Filter,0x00200000,1,0,V0400Vfw.dll,1.00.0001.6784
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7600.16385
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7600.16385
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7600.16385
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7600.16385
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7600.16385
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7600.16385
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7600.16385
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7600.16385
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7600.16385
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7600.16385
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7600.16385
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16385
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7600.16385
TS Strider,0x00200000,1,1,TSStrider.dll,1.01.0004.0021
Dump,0x00200000,1,0,DvFileWriter.prm,9.00.0000.0000
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7600.16385
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7600.16385
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7600.16385
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7600.16385
MPC - Mpeg Splitter (Gabest),0x00400001,1,1,MpegSplitter.ax,1.03.1458.0000
TSSourcePush,0x00200000,0,1,TSSourcePush.dll,
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7600.16385
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7600.16385
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7600.16385
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7600.16385
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7600.16385
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7600.16385
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7600.16385
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7600.16385
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7600.16385
IL FL Studio DXi,0x00200000,1,1,FLSTUD~2.DLL,1.00.0013.0000
IL Multi FL Studio DXi,0x00200000,1,1,FLSTUD~1.DLL,1.00.0013.0000

WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385

Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7600.16385
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7600.16385
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7600.16385
Fraps Video Decompressor,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7600.16385
Xfire Video Codec,0x00200000,1,1,qcap.dll,6.06.7600.16385

Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16385
PCM,0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode1),0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode2),0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode3),0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode1+),0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode2+),0x00200000,1,1,quartz.dll,6.06.7600.16385
Ogg Vorbis (mode3+),0x00200000,1,1,quartz.dll,6.06.7600.16385
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16385
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7600.16385
MSN Messenger Audio Codec,0x00200000,1,1,quartz.dll,6.06.7600.16385
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7600.16385
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7600.16385
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7600.16385

Audio Capture Sources:
Stereo Mix (Realtek High Defini,0x00200000,0,0,qcap.dll,6.06.7600.16385
FrontMic (Realtek High Definiti,0x00200000,0,0,qcap.dll,6.06.7600.16385

PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7600.16385
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16385
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16385

Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7600.16385
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7600.16385

WDM Streaming Capture Devices:
,0x00000000,0,0,,
,0x00000000,0,0,,
,0x00000000,0,0,,
,0x00000000,0,0,,

WDM Streaming Rendering Devices:
Realtek HD Audio output,0x00200000,1,1,ksproxy.ax,6.01.7600.16385
Realtek HDA SPDIF Out,0x00200000,1,1,ksproxy.ax,6.01.7600.16385

BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7600.16385

Video Capture Sources:
Live! Cam Notebook Pro (VF0400) (VFW),0x00200000,0,0,qcap.dll,6.06.7600.16385

Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385

BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7600.16385
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7600.16385

BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7600.16385
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7600.16385
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7600.16385
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7600.16385

WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385

Audio Renderers:
Speakers (Realtek High Definiti,0x00200000,1,0,quartz.dll,6.06.7600.16385
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7600.16385
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7600.16385
DirectSound: Realtek Digital Output (Realtek High Definition Audio),0x00200000,1,0,quartz.dll,6.06.7600.16385
DirectSound: Speakers (Realtek High Definition Audio),0x00200000,1,0,quartz.dll,6.06.7600.16385
Realtek Digital Output (Realtek,0x00200000,1,0,quartz.dll,6.06.7600.16385

---------------
EVR Power Information
---------------
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0


PS: Almost forgot, in Event Viewer, I can only see Event ID 41 error that's related to the premature shutdowns!

Relevance 100%
Preferred Solution: Event ID 41 Error - Spontaneous Shutdown

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Event ID 41 Error - Spontaneous Shutdown

Update Realtek HD audio drivers - http://sysnative.com/0x1/DriverRefer...l#RTKVHD64.sys

See if update available for NVIDIA GeForce GT 230 drivers - http://www.nvidia.com/Download/index.aspx?lang=en-us

" " Marvell Yukon 88E8071 PCI-E Gigabit Ethernet Controller - http://www.marvell.com/support.html

Try these 3 places for additional information -

1. WERCON -
START | type view | "View all Problem Reports" | 2x-click on line item for additional crash info

2. Reliability Monitor -
START | type perfmon /rel

3. Event Viewer -
START | type eventvwr.msc | Custom Views | Administrative Events

Regards. . .

jcgriff2

`

13 more replies
Relevance 62.32%

BACKGROUND:

I'm troubleshooting a critical error message I receive in the event log. It's the same as has been previously reported here. Prior to upgrading to Windows 10, my system was running Windows 7 Pro SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7. I have performed a clean install of Win 10 and still am receiving error messages.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>3</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000400000000002</Keywords>

<TimeCreated SystemTime="2016-01-04T21:03:56.991237200Z" />

... Read more

More replies
Relevance 62.32%

==> NOTE <==

I placed this thread under the "bsod-crashes-debugging" forum because I wasn't sure where it belonged. If the moderator is able to move it to a more appropriate forum, please do so. If it is moved to a different forum, please inform me via email. Thanks in advance for any assistance with this issue.

-----------------

BACKGROUND:

Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0&... Read more

Answer:Critical error Event ID 41 after every shutdown and bootup.

RESOLVED:

Since placing this thread, I was addressing other errors I found in the event logs. One of those had to do with "Metadata staging failed".

Researching about this error let me to the URL:

http://www.eightforums.com/bsod-cras...-failed-3.html

where poster Saammy gave the following possible solution:

I have the solution for the problem.
Searches on regedit for the following entry: DeviceMetadataServiceURL
There you change the URL in the following: http://dmd.metaservices.microsoft.com/dms/metadata.svc
after you have closed the editor is saved the change.
Now the problem is solved and it will also re-loaded device information.

As instructed, I used regedit and searched for "DeviceMetadataServiceURL", and it's value was set to:

http://go.microsoft.com/fwlink/?Link...69&clcid=0x409

I changed the value to "http://dmd.metaservices.microsoft.com/dms/metadata.svc" and then rebooted.

The end result was that this did indeed fix the "Metadata staging failed" errors, and interestingly enough the Event ID 41 is no longer showing up in the event logs after shutdown/reboot. I did 5 shutdown/reboot sequences... 1 per hour, and neither problem has occurred since making the above change.

5 more replies
Relevance 62.32%

BACKGROUND:

I'm troubleshooting a critical error message I receive in the event log. It's the same as has been previously reported here. Prior to upgrading to Windows 10, my system was running Windows 7 Pro SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7. I have performed a clean install of Win 10 and still am receiving error messages.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>3</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000400000000002</Keywords>

<TimeCreated SystemTime="2016-01-04T21:03:56.991237200Z" />

... Read more

More replies
Relevance 62.32%

==> NOTE <==

I placed this thread under the "bsod-crashes-debugging" forum because I wasn't sure where it belonged. If the moderator is able to move it to a more appropriate forum, please do so. If it is moved to a different forum, please inform me via email. Thanks in advance for any assistance with this issue.

-----------------

BACKGROUND:

Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.

The error I would like help with today is of the "Critical" level in Event Viewer.

PROBLEM:

After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:

"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

---------------------- START: Event Viewer XML error text ---------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0&... Read more

Answer:Critical error Event ID 41 after every shutdown and bootup.

RESOLVED:

Since placing this thread, I was addressing other errors I found in the event logs. One of those had to do with "Metadata staging failed".

Researching about this error let me to the URL:

http://www.eightforums.com/bsod-cras...-failed-3.html

where poster Saammy gave the following possible solution:

I have the solution for the problem.
Searches on regedit for the following entry: DeviceMetadataServiceURL
There you change the URL in the following: http://dmd.metaservices.microsoft.com/dms/metadata.svc
after you have closed the editor is saved the change.
Now the problem is solved and it will also re-loaded device information.

As instructed, I used regedit and searched for "DeviceMetadataServiceURL", and it's value was set to:

http://go.microsoft.com/fwlink/?Link...69&clcid=0x409

I changed the value to "http://dmd.metaservices.microsoft.com/dms/metadata.svc" and then rebooted.

The end result was that this did indeed fix the "Metadata staging failed" errors, and interestingly enough the Event ID 41 is no longer showing up in the event logs after shutdown/reboot. I did 5 shutdown/reboot sequences... 1 per hour, and neither problem has occurred since making the above change.

3 more replies
Relevance 61.91%

Hello all,

I will provide as many details as I can since the thread title is a bit ambiguous. I'm having a problem with my parents computer that I can't seem to pin down. Attached is the latest dump file from a BSOD. However, the machine will also spontaneously restart on its own, most often occurring during it's normal routine of web browsing, but also when completely idle. I can't find any details in the Windows event logs, other than "The computer shut down unexpectedly."

Here are the details for this machine.

Windows 7 Ultimate x64
Gateway GT5678
Unknown board manufacturer
Intel Core 2 Q6600
ATI Radeon HD 2400XT onboard
Avira Anti-virus
Chrome and Firefox web browsers

If there is anything else I can provide I will do so as soon as possible, any and all help is appreciated, as I am running out of luck with this one. I've took high school classes in troubleshooting, but that was 10 years ago, and I also have no way of analyzing dump files like you miracle workers can. Thanks for the help.

Answer:BSOD and spontaneous restarts (No known recurring event found)

Can you first run some hardware tests as the dump files seems corrupt, the others date back last year so they're disregarded.
I think our first step is to rule out whether it's software or hardware.
Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours



   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes



   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Run a Disk Check to scan for errors



   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Post back the results.

1 more replies
Relevance 61.5%

I'm getting a trio of critical error messages in event viewer after each shutdown:

- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

- "Windows failed fast startup with error status 0xC00000D4."

- "The previous system shutdown was unexpected."

The PC starts up fine and seems to shut down very fast - within 10-12 seconds, and there seems to be no issues with startup or shutdown. But when I stumbled onto these critical messages in event viewer I got concerned. What could be triggering this? How do I troubleshoot this? They are logged in event viewer after each shutdown/reboot.

Answer:Critical error messages in event viewer after each shutdown

Try turning Fast Start Up off in the Power Options Menu. Finding the option is a bit obscure. There are some known issues with this. It is on by default in Windows 10 and will trigger shut down errors.

3 more replies
Relevance 61.5%

Now, this is a thread I am starting just in case anyone else has run into this issue but, it looks like I have found the solution: https://www.tenforums.com/bsod-cras...-event-id-41-after-every-shutdown-bootup.html

Ok, I have had this Windows 10 install from September 2015 until now and I am not going to redo it from scratch. The error 41 would only occur when I was using Hybrid shutdown mode but never without it. Also, it was a highly random issue, sometimes, it would occur and sometimes, it would not occur for the longest time.

I have gone from a Gigabyte Z170 and i7 6700k to an FX 8300 with Asus 970 Pro Aura on this build. I now have 2 x 1TB SSD but, I was also using a 180GB Intel SSD and a Adata 480GB SSD at one point, I just cloned the Windows 10 install over each time. I tried different sata cables, different sata drivers, tried using minimal hardware and even a different keyboard.

I am now on a 2 x Sapphire Fury setup, was on a EVGA 980 Ti, used a R9 380 and even had a R9 290x before the 980 Ti. I did the proper driver cleaning without issue and tried different video drivers as well. Recently, the problem appeared to more often and a lot less random.

After applying that solution above, it appears to have been resolved. However, I will keep this thread updated just in case.

Note: To those who want to just bash windows, DON'T! THis is meant to help people who may be running into this problem like I was for the longest time. It was only in the install of Window... Read more

More replies
Relevance 61.5%
Answer:Kernel Power - Event ID 41 - Task Category 63 (spontaneous improper sh

Hi packman888,

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
____________________... Read more

1 more replies
Relevance 61.5%

Hello. I'm not sure the nature of this problem, but it may have something to do with XP, so I'm posting it here.

I'm running a dinosaur computer. It's an old 300mhz Sony Vaio laptop that my dad gave me when I moved out of my parent's house. It (slowly) runs Windows XP. I've been trying to scrape up enough money to get a new computer, but progress on that has been very slow, and meanwhile I have a serious problem with this thing.

The problem is as such:

I'll be using the computer and, at any random moment in time, it will spontaneously shut down. I'm not talking about getting an error message and then it formally shutting down either. I mean that the computer literally just dies immediately, at random. The screen turns off and the fan dies, but the "on" light stays on. A few seconds after the shutdown, the fan comes back on, but the screen stays off, and nothing with the computer will work unless I unplug it, then plug it back in.

Sometimes I will get a blue screen and a disk check, sometimes not. It seems completely random whether that happens or not.

Since this started happening, I've installed the XP Service Pack 2, which hasn't slowed the problem down. I've also performed extensive spyware elimination, and switched from using Microsoft Internet Explorer to Mozilla Firefox.
I've also been performing extensive virus scans, primarily with a program called Avast, a freeware virus scanner with constant u... Read more

Answer:Spontaneous shutdown

http://www.duxcw.com/faq/win/xp/xpreq.htm

Go here and make sure your laptop meets the system requirements for XP
 

2 more replies
Relevance 61.5%

I have a HP and I have windows XP. My computer keeps on shutting off spontaneously. Like one minute into it loading up it shuts off. can someone help!!!!me!!!
 

Answer:Spontaneous Shutdown????

Checkout sequence

In order of probability

(a) you have a virus
(b) you have a memory failure
(c) you have a fault in the motherboard
(d) you have overheated your CPU
(e) your OS has become corrupted or settings for power management have changed

We need much more detail about your PC and what led up to this. How long has your PC worked. Do you have firewall and anti-virus installed. Have you recently installed something other than proper commercial software. Do you run games. Have you overclocked your PC. Have you been poking around inside the case.
 

2 more replies
Relevance 61.5%

Lately I've been experiencing very strange behaviour on my main Windows 7 workstation. I'm getting completely spontaneous shutdowns that don't show BSOD or even crash dump. Originally I thought iTunes was triggering something but recently I've had a few shutdowns without it running. I'm having a hard time troubleshooting because of the lack of feedback.

Memory tested fine with MemTest86+ and none of the other devices in the power bar turn off, so I'm fairly certain it's not a PSU thing. I just find it very strange that it doesn't restart but shuts down completely.
 

Answer:Spontaneous Win 7 shutdown

Well first I'd double check your WIndows Update settings.

Control Panel\System and Security\Windows Update\Change settings

and switch to "Check for updates but let me manually choose whether to download and install them" if you haven't already. I find anything else is either leaving you too vulnerable by manually forcing you to check or it'll just download, install, and restart without your intervention. Really pisses me off you have to do a registry hack to postpone a restart until you are ready especially when half the updates aren't doing major changes to cause it to be necessary.
Second I would check the Event Viewer and see if anything strange rears its head. I wouldn't be surprised if it was those damn Windows updates though.
 

4 more replies
Relevance 61.5%

my Toshiba Satellite P30 laptop started randomly shutting itself down last summer (house i was staying at had no A/C)... i assumed it was because it was overheating, and blowing a box fan across it made it work fine... it has a 3.4 Gh Pentium 4 processor and probably too much junk on it which i have been uninstalling some of... at times (with A/C in the house) it works for long stretches, except when the hard drive or CD drive has to run for an extended period (like for a virus scan)... other times it shuts down after minutes... propping it up on a book seemed to help for a while, but at this point in time i can't even get it to stay on long enough to load Windows all the way, even in safe mode... which is the problem- there is some stuff on there i need to get off so i don't lose it, and if it won't run i can't try to figure out how to fix it.... any thoughts? (no, a cooling tray was of no help).... when i restart it it starts up as if nothing had happend- no error messages or anything... and then it just shuts off again... i can hear hear the cooling fans running from the time i push the power button to turn it on... how does one discern if the fan for the power supply is working?
 

Answer:spontaneous shutdown

7 more replies
Relevance 61.5%

Toshiba laptop running Windows XP

Lately I have been experiencing spontaneous shutdowns. Doesn't matter which program is running (it happens often during long back up sessions - tho not always). The unit is always plugged in during these episodes, and occasionally will give a warning dialog that battery power is low (even tho plugged in) just before shut down. Is this a hardware, or software issue? Any other ideas? Thanks all.
 

More replies
Relevance 61.5%

Recently (one month prior) bought a brand new Sager. A week ago, it began to suddenly shut down. No warning or blue screen -- just black screen and no power.

It usually happens within one minute of power on. If I immediately restart, it will suddenly shutdown a few seconds after the desktop comes up. If it runs for about 3 mins or more, it will run the entire session until I restart or manually shut down

The only temp fix I've found is to boot in safe mode and restore the system from a few days prior. But after I shut down manually or restart, the sudden shutdown can happen again once I restart.

Nothing is helpful from the event viewer. Only:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

ESET virus runs my system clean. No suspicious activity or anything looking like a virus.

While I suppose it could be hardware, the system seems to be unaffected in Safe mode.

Driver issue? Boot issues? Any suggestions to try to resolve the issues?
 

Answer:Spontaneous shutdown - help!

Hi and welcome to TSG.

We could do with more information about your system in order to make any educated recommendations.

Can you provide the exact make and model of the PC?

What operating system are you running (WinXP, Win7, 32bit or 64bit)?

Are all your drivers and operating system software fully patched and up to date?

Did you install any new hardware or software around the time the problem started?
 

1 more replies
Relevance 61.5%

Having a strange problem with my PC... It will be running fine, and then suddenly, shutdown and restart. Very frustrating! Any ideas as to what may be wrong?

Answer:Spontaneous Shutdown

Post some info about your machine your specs

6 more replies
Relevance 60.68%

My W500 has a habit of abruptly shutting down (immediate and total power off) when some heavy CPU activities are running (big calculations in Matlab, running some games).  I have to remove both the AC power and battery to start it again. Is there a known solution for this issue?  They don't seem to happen after prolonged use, nor does the case seem hotter than usual.  It is rather unworkable at the moment.  My T series seemed to do this some times as well ... ~ CDB 

Answer:Sudden/spontaneous shutdown

Hi datamule, Welcome to the Lenovo forum  Your W500 might be shutting down because it is overheating. You could monitor the various temperature sensors as you start a large Matlab calculation: TPMonitor shows the ThinkPad temperature sensors. TPFanControl shows the same ThinkPad temperature sensors, and lets you control the fan speed (which you don't ordinarily need to do.) RMClock will show you the temperatures reported by the Core 2 CPU's internal diodes--these are what the CPU monitors to determine if it must shut down for safety. You can also use RMClock to undervolt your CPU to reduce temperatures. I'd also suggest booting Memtest86+ and letting the tests run through at least one complete pass to make sure your RAM is ok. And running the mprime torture test for at least a few minutes to make sure that your CPU is working properly. That last one *will* heat up your ThinkPad. It would be a good idea to watch the temperatures with one of the above utilities as it runs. If you determine that your problems are caused by overheating, it might be time to look at notebook coolers. Best of luck,-Frank 





---------Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.Did someone help you?Say thanks! with a kudo.Even better: Pay it forward, help someone else.

4 more replies
Relevance 60.68%

I just got an X61 7673-CTO with 4 GB of RAM, 1GB Intel Memory Boost 160 GB hard drive and Vista Ultimate. It worked well for about a month then started spontaneously going into sleep mode. This happens regardless of what I am doing and sometimes it would boot and go to sleep even before I have had a chance to do anything. If I re-start it from sleep, it would show the log on page and before I finish entering the password or swiping my finger, it is back in sleep mode. I have had to shut down with the power button and re-start several times. I have updated Vista and used the system update. I have eliminated as many programs as I can spare. Adebamowo X61 7673-CTO with 4 GB of RAM, 1GB Intel Memory Boost 160 GB hard drive and Vista UltimateMessage Edited by adebamowo on 05-28-2008 11:02 PM

Answer:X61 spontaneous shutdown and sleep

Are you doing this on battery or A/C? Just thinking that if there is an issue with your battery and charge is low, your system would want to go into hibernation.

9 more replies
Relevance 60.68%

Any one can help me My PC spontaneosely restart after I shut it down I tried the following methods but it failed 1-( Right click my compuer - Properties- advanced- system start up & recovery - settings then Un check automatic restart )2- I changed windows for several times the issue resolved & get back again each time.

Answer:spontaneous retart after shutdown

no if you are installed new os once again then also its giving same problem r what ? tell me first ok

3 more replies
Relevance 60.68%

Hi, I've been having troubles with a Z60t for quite some time now. It occurs at  different points of time, both when I'm trying to install an OS (tried with both linux and windows) and when I'm just in BIOS or running a test. It happens after varying amount of time, sometimes after 15 seconds, sometimes after 5 minutes. It dies instantly with no error messages and no beeps. Things I've tried:Removed batteryChanged AC adapterRun memtest (died directly once and passed about 40% the other time but I had to abort because of lack of time)It seems to work fine with a Linux Live CD (hasn't died during any session)The motherboard has been replaced by Lenovo repair centerI've tried deactivating most features in the BIOS, but probably not _everything_It doesn't seem to be unusually hot, at least not on the outsideI've cleaned the cpu fan, no dust or anything thereSo what do you think? I still suspect memory problems (as I've not checked it thorougly), but then wouldn't a Live CD work as good as it seems to? I'm happy for any ideas or thoughts! br.SimonMessage Edited by zipmao on 02-05-2009 03:05 AM

Answer:Z60t spontaneous shutdown

CPU temperature can be checked with HWmonitor downloaded off the web... Did you ever dropped or spilled anything on your laptop???  

2 more replies
Relevance 60.68%

Hi! I've been a proud and happy owner of the X220 since August 2011. Despite all the bugs this device has had I'm rather satisfied with my first ThinkPad. I haven't had any major problems with it, the ghosting issue doesn't affect me that much because I don't have static images that often. Anyways.. I was actually reading through some threads here on the Lenovo forum while all the sudden the computer just shutdown on me, for no apparent reason. It tried to restart by itself a couple of times but the battery lamp was blinking orange so I quickly pulled out the battery and put it back in along with the laptop charger. Note: A month or two before today, I accidently drained the battery to 0 % but replenished it quick. I started the computer again and saw that the battery level was at 70 % so I pulled out the charger. I checked for any loose connections between the battery and the computer by wiggling the battery, but no signs of error. So I am asking you guys; should I be worried? EDIT:I saw the x201 thread about the same issue. Has this been reported for the x220? My specs are: 4286-CTOIntel Core i7-2620m8 GB of RAM (4 GB on original purchase, upgraded it with another identical 4 GB)320 GB HDDIPS Screen EDIT2:Downloaded RealTemp and I'm logging the temperatures atm. Will examine the logfile if the random reboot occurs again.













Solved!

Go to Soluti... Read more

Answer:Spontaneous shutdown of X220

Random shutdown could be caused by a few factors...Recommended items to do.1. Update BIOS2. Update drivers via System Update and Windows Update.3. Re-seating RAMs.4. Faulty RAMs (Try using only 1 RAM)

9 more replies
Relevance 60.68%

I have a Philips Freeline LS2000, running Windows XP Home. It goes into standby mode spontaneously, or even shuts down, apparently randomly. This is sometimes after an hour of use, sometimes even before completing boot-up.Any suggestions?

Answer:spontaneous standby/shutdown

Given the erratic nature of the problem I think a dodgy power supply is the most likely culprit. Is it under any kind of warranty?

1 more replies
Relevance 60.68%

First of all, thank you for any help you can offer. I am moving overseas in less than a week and am hoping I can figure out whether I can fix my laptop or need to replace it.

I have attached the files from the BSOD File Collection app and System Health Report.

I have a Compaq Presario F761US, about four years old. I'm running the OEM Vista Home Premium SP1, 32-bit. I reinstalled it from recovery discs about 3 weeks ago when I replaced the hard drive.

Since replacing the hard drive, I have only experienced one crash, which was earlier today. However, the reason I replaced the hard drive was that over the past year or two I was experiencing intermittent spontaneous crashes, where the screen would just go black and the system would just shut off (I had disabled automatic reboot, but I still wasn't getting any actual blue screen). The spontaneous shutdowns became very frequent a few months ago. Regrettably, I wasn't aware of this forum yet. I suspected the hard drive, replaced it and did a fresh installation of Windows. That was about 3 weeks ago and everything seemed fine until earlier today the screen went black again. It automatically rebooted and once Windows was up, I got the "unexpected shutdown" message with the following details:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 803D3130
BCP... Read more

Answer:BSOD/spontaneous shutdown help

While 1 dump is never conclusive, usually we look for patterns in multiple dump files this does name the network system assuming you were using the wireless update the Atheros AR5007 driver yours is from 2007 the latest is from 2010, this is the best site we've found for them> Drivers for Atheros AR5007 and Windows Vista

These other drivers will also possibly have updates.
CHDRT32.sys Tue Mar 4 13:31:57 2008 (47CD959D)
HSXHWAZL.sys Wed Jun 20 14:28:32 2007 (467971D0)
HSX_CNXT.sys Wed Jun 20 14:28:20 2007 (467971C4)
HSX_DPV.sys Wed Jun 20 14:29:51 2007 (4679721F)
HpqKbFiltr.sys Mon Jun 18 18:12:03 2007 (46770333)
NuidFltr.sys Fri May 8 04:35:42 2009 (4A03EEDE)
OADriver.sys Wed May 30 08:42:16 2012 (4FC615A8)
OAmon.sys Wed May 30 08:42:22 2012 (4FC615AE)
SbieDrv.sys Sun Jun 17 03:51:16 2012 (4FDD8C74)
SynTP.sys Thu Mar 27 21:14:58 2008 (47EC4692)
athr.sys Wed May 30 18:40:39 2007 (465DFD67)
cpqbttn.sys Wed Jun 28 11:54:39 2006 (44A2A63F)
mdmxsdk.sys Mon Jun 19 17:26:59 2006 (449716A3)
nvlddmkm.sys Wed Jun 24 09:12:07 2009 (4A422627)
nvmfdx32.sys Fri Aug 1 14:37:49 2008 (489357FD)
nvsmu.sys Fri Feb 16 10:50:31 2007 (45D5D2C7)
oahlp32.sys Sat Nov 19 16:09:19 2011 (4EC81AFF)
oanet.sys Wed May 30 08:42:28 2012 (4FC615B4)
rimmptsk.sys Sat Feb 24 00:42:21 2007 (45DFD03D)
rimsptsk.sys Tue Jan 23 02:40:19 2007 (45B5BBE3... Read more

11 more replies
Relevance 60.68%

I'm running Windows 7 on an AMD system. The system just shuts off after about 2hrs. running. There's no warning, no BSOD, no error messages. I've tested the system memory, hard drive and CPU all test out fine. If I leave any of those utilities running it will run until shut off. I let the memory test run overnight no issues. I've looked at all the event logs and the power save settings and can't find any error messages coinciding with the shut down so at this point I'm stumped at where to look next.

Answer:Windows 7 spontaneous shutdown

With the conditions your describe, I would suspect a power problem . . What is the Brand/Wattage and age of the Power Supply?

Please post your PC specs.
Pre-built--Brand Name & Model Number
Custom Built--Brand & Model of Mobo-CPU-RAM-Graphics-PSU

Have you looked in Event Viewer for hints on what is causing the shutdowns?

4 more replies
Relevance 60.27%

I have been having consistent power offs/reboots lately, and im at my wits end about how to fix them.
It always seems to happen when im playing a high end game (Guild Wars 2, Mirrors Edge, etc.). 
I havent experienced it while just browsing or doing basic work, or while playing lower intensity games that hog less resources.
The computer screen goes black, it reboots and i get the "windows has had an improper shutdown" kind of message.

Usually after playing the game for an hour at the least, though its happened 2-3 hours into the game as well.

I checked temps, and they are all normal,
Ive also attempted updating drivers, and downgrading from any beta drivers i was using, and none of that seemed to affect it.



I checked event viewer,
And right before this shutdown i get the critical error "Kernel-Power" "Event ID 41" Task Category 63"
this is the XML given to me in the details:
------------------------------------------------------------------------------------------------------------------------------------------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">


- <System>


<Provider
Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />



<EventID>41</EventID>



<Version>2</Version>



<Level>1</Level>



<Task>63</Task>


... Read more

Answer:Kernel Power - Event ID 41 - Task Category 63 (spontaneous improper shutdowns and reboots)

Hi,


This scenario usually indicates a problem with the hardware. Or, the driver can cause this problem. To help isolate the problem, check the following items: 


1. Overclocking: Disable overclocking to see whether the issue occurs when the system is run at the correct speed.
2. Check the memory: Verify the memory by using a memory checker. Verify that each memory chip is
the same speed and that it is configured correctly in the system.
3. Power supply: Make sure that the power supply has enough wattage to appropriately handle the
installed devices. If you added memory, installed a newer processor, installed additional drives, or added external devices, such devices can require more energy than the current power supply can provide consistently.
4. Overheating: Check whether the system is overheating by examining the internal temperature of
the hardware.
5. Defaults: Use system defaults, and run the system. 

If you see that the computer generates a Stop error that contains a BugcheckCode value that is not reported in an event ID 41, change the restart behavior for the computer. To do this, follow these steps:


1. Right-click My Computer, and then click Properties.
2. Click Advanced system settings.
3. Click the Advanced tab.
4. In the Startup and Recovery section, click Settings.
5. Click to clear the Automatically restart check box.


For more information, please refer to this.
http:... Read more

6 more replies
Relevance 59.86%

If this message is in the wrong forum, please direct me to a better one.

Lately my Toshiba Satellite spontaneously shuts down. It completely turns itself off. This is a new phenomenon for this machine. It happens frequently and usually without warning. Only once was there a warning of a software error. There do not seem to be any power surges or power outages. My wife's Dell notebook is plugged into the same surge protector and it is not affected. The power connection to my computer appears to be OK.

Most of the time, the shutdowns occur only after the machine has been in use for a while. When the shutdowns occur, the machine is often (if not always) physically warm. For any session of use, once the shutdowns start happening, they occur with increasing frequency until I let the machine sit for a while without running it.

I have reinstalled the system software, applications and utilities. This included reformatting the HD. I have also run msconfig and eliminated most of the startup items. The shutdowns continue to occur.

I know the battery is worn out. However, the battery has been compromised for a long time, and the shutdowns only started recently. I only run run the machine plugged into the wall. When I inadvertently leave the machine on and not plugged it, the battery lasts only five or ten minutes. Usually, when I am not using the computer, I turn off the power at the surge protector. Sometimes when I do this, I loose the settings on my computer clock and have ... Read more

Answer:Solved: Frequent Spontaneous Shutdown

It looks like I have solved this problem. Apparently my notebook was overheating due to the flow of air into the cooling fan being blocked. I have had it sitting on top of a platform that had an irregular surface that somewhat inhibited the flow of air. Then I happened to tape a piece of paper (a note about something I needed to remember) on the front of the machine. That apparently blocked that flow even more. Since I took the paper off and raised the notebook up on blocks--making sure not to block the cooling fan,--it has no longer shut down spontaneously. I intend to take the case off of the back and see whether there may also be some dust deposits that were contributing to the problem. My thanks to everyone who read this post.
 

1 more replies
Relevance 59.86%

Hi. My computer has been shutting down spontaneously for a few months but lately it's been pretty bad.

It started not doing it during any particular program. I could just be playing games with my daughter at the barbie site and it would just shut down like it had a power outtage.

I've ignored it because it's been sporatic but lately since it does it quite a lot, I decided to run spybot on it but it almost always shutsdown before the scan is complete. Sometimes it won't even start up after it shutsdown.

I managed to do ad-aware on it which removed some things but not all and it's still having these weird power-outages.

Does this sound like some sort of spyware thing? Or is it (hopefully) a faulty power supply?

I'm running Windows XP Media Center. I just usually use it for e-mail and Internet. Any help would be appreciated. Thanks.

CW
 

More replies
Relevance 59.86%

Hi
I'm new to this forum, but as usual come with a problem - it's a minor annoyance of SP3 rather than a dire problem. I have read alll the related problems, but nothing is exactly the same.

I have a new Dell computer (Intel chip, not AMD) with WinXP Pro SP3 already installed. I kept my own peripherals and installed them on receiving my new computer and found the newest drivers I could. I have checked Device manager and there are apparently no problems.

I installed Kaspersky Security suite but after this problem ocurred disabled Windows Security Cantre as this was a conflict problem in SP2. No difference.

I thought at first that this was a random problem after closing all programs and shutting down correctly, the computer would immediately spontaneously reboot. But I could go through the shutdown procedure again without a problem. I have since noticed that this only occurs after being on standby, whether the standby is imposed by myself or automatic after the specified time unused. I seem to have no problem shutting down immediately after ceasing to use the computer.

I notice that the standby settings are slightly different in SP3 than SP2 and one has the opportunity to shut down the harddrive after a time as well as go to standby. As these times were the same I thought this might cause a problem, so I have altered one, but it makes no difference. I've also noticed that there is now a new intervening screen to logon after stand by rather than going straight ba... Read more

Answer:SP3 spontaneous reboot on shutdown after standby

Try reinstalling your video driver. I find a lot of standby problems are associated with corrupt (or incorrect) video drivers.

1 more replies
Relevance 59.86%

I'm using a very trustworthy 2.5 year-old T500 running Vista SP2 32-bit and my laptop has begun to have the same spontaneous shutdown problems as other users who've written here.  I suspect it's overheating.  I normally use my T500 on a docking station, which may or may not exacerbate an overheating issue.  I want to address this problem to ensure that I can continue to progress on my PhD dissertation (!) without crises, so I have taken some of the steps previously recommended for this problem here on this board.  I installed TPFC today to begin monitoring CPU temperature and it appears that it runs between 55 and 65 C.  Other temps listed are lower.  I also made necessary adjustments in Power Settings to maximize fan speed and allow CPU speed to float.  I also removed the battery so I'm using AC power with no battery/recharging processes to add to the problem, though I'm not certain that last part will make any difference. I want to also clean the fan since I'm sure it's probably dirty after 2.5 years of continous use in my house.  How can I take my laptop apart to clean the cooling fan?  Or is this something I should take it to a repair shop to accomplish? Thanks in advance for your advice.

Answer:Need more info - same spontaneous shutdown problem...

Taking apart the laptop is fairly easy (I do it on a fairly regular basis, twice a month or so; I'm paranoid that way ).You can find the HMM for the T500 fairly easily: http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.htmlMy CPU (P8700) runs between 35 and 40 degrees idling-lightwork and maxes out at 64 with IntelBurnTest. Yours may or may not be out of the ordinary depending on the conditions.

9 more replies
Relevance 59.45%

Hi,

I have recently been having trouble with some kind of malware that redirects from search engines. Also, every hour or so, a box will pop up saying that something has stopped working/terminated (DCOM, Plug and Play, Windows) and my computer shuts down after about a minute. Finally, internet explorer occasionally pops up and goes to a random webpage every so often. All of these problems started at the same time. While none of them have prevented me from being able to do my usual work, they are certainly a nuisance, and I'm worried that they may cause deeper problems.

My operating system is Windows Vista, and I have run Malwarebytes, CCleaner, avast antivirus scans, and SuperAntiSpyware. SuperAntiSpyware picks up multiple adware.cookie things every time I run it, but the problem has not changed. As you can see, I am not particularly computer savvy, and so I would be quite grateful for any help. Thanks!

More replies
Relevance 59.45%

Hi Guys, I'm running a pc with the following stats:

Intel(R) Celeron(R) CPU 1.70GHz
CPU speed 1692.89MHz
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2
L1 cache size: 8KB
L2 cache size: 128KB
Video Card: nVidia RIVA TNT2 Ultra
Sound Card: Creative Soundblater Live!
Power temperature @ idle: 44C
System temperature @ idle: 32C
CPU temperature @ idle: 40C
Maximum CPU temperature: 54C

My @%#@$%%#$ PC has occasionally been shutting itself off without apparent reason!! Sometimes I log into windows and after a few minutes it just resets itself as if the reset button had been pressed, feels like the power's been cut off. At times it doesn't even manage to log into windows because it resets at the loading screen like a guy who's trying to get rid of something he's got in his intestines but can't. Othertimes it used to do this as soon as I'd try to play (apparently unsupported) .avi files on the windows media player - I could repeat the fault at will then, but it seems like this has stopped for good since I have disabled the Microsoft System Management BIOS Drivers (which were marked by an exclamation mark!) from the Device Manager. It seemed all went fine for a week or so, so much that I forgot all about it, until two days ago the same thing happened with perfect timing at the end of a DVD movie I was watching and a little after I thought "hey I hope that thing doesn't happen while I'm watching this movie". Now now, I... Read more

Answer:Computer possessed by the spontaneous shutdown of death

12 more replies
Relevance 59.45%

Morning!


The Specs

Fujitsu Siemens Amilo XI 2528 - all components default:
Around three/four years old
Intel Core Duo CPU T8100 @ 2.1GHz
nVidia GeForce 8600M GS Graphics Card 512MB
OEM OS: Windows Vista Home Premium - 32 bit
New OS: Windows 7 Professional 32 bit; installed roughly two weeks before crash*
Hard Drives: WDC WD25 00BEVS-2 SCSI Disk Device x2
RAM: 4GB DDR3

*Not Default

The Situation
I'd installed Windows 7 around a week before this happened: I had several tabs open in Google Chrome including Youtube and browser-based games. I got a sudden BSOD so I chose at first to just startup normally and it worked fine - phew. Around a week after that (again in Google Chrome) I had Facebook and a couple of tabs of Youtube open and my computer shut off completely - not even a BSOD. I booted up and it got to the start-up screen with the W7 logo and 'Starting Windows', then it shut off again.

I tried startup repair and it failed with an error (I'll check for an error code when I get back and update). I decided to simply reinstall Windows 7 as since I installed it I only installed Google Chrome and iTunes since the install, so I wasn't bothered about losing anything. I booted with the disk and when it came to choosing a partition to install to, none showed up. I went into Safe Mode and everything works fine. Whenever I try to boot normally, though, it fails.

Additional Information
On startup, at the point in time you press F2 to enter BIOS, etc., there are several ... Read more

Answer:Spontaneous shutdown; now only works in Safe Mode

Start by trying these free, bootable diagnostics: Initial Hardware Diagnostics
FWIW - I suspect that you have a failing hard drive - so the hard drive diagnostic is (IMO) the most important test.

9 more replies
Relevance 59.04%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Relevance 58.63%

Can anybody help? I'm running vista, and my laptop seems to like to spontaneously shutdown during processes, and now won't reboot into any windows screen. There is blue screen if it does, but it is simply lack of windows on this rather than freezing or anything. the only thing i can access is ssystem recovery... anything?

Answer:spontaneous shutdown and blue screen, with non safe mode

Hi smokeymcjazzcat

A few things to try & look at:

Memory Diagnostics Tool

System Files - SFC Command

Startup Repair

Repair Install For Vista

1 more replies
Relevance 58.22%

Hi,

Something really strange happened to our laptop. Working normal until my wife was shutting it down. She closed the lid after initiating shut down. After it never shut down, she opened it up and did a hard shut down. At next restart, she was prompted to enter safe or normal mode. She chose normal mode and the computer started but many settings were reverted to what they were several days ago. First thing she noticed was wrong was her desktop background was a previous one. Second thing was that her Outlook account was erased and outlook no longer sends/receives emails. (I just loaded her pst file (outlook) into Outlook 2007 yesterday and it worked fine for a day until this incident...now her outlook folders and old emails are intact, all emails received AFTER I loaded the .pst are gone, in addition to her account settings).

There may be other things amiss, but this freaked us out and, thinking this is a virus, we just shut the thing down)...reason for the virus paranoia? We just copied to this laptop tons of files (no .exe files I think, all data) from a computer that is infected with a virus related to "Ophcrack," in an effort to save files on that systems before we totally wipe it; I didn't think that all files on a pc were necessarily infected if the machine was running a virus.

We don't know where to start. Can anyone help us start to narrow the problem down?

Thanks!

Answer:Spontaneous settings restore and data lost after hard shutdown

I would strongly suspect a Virus or Mal/Spyware has gotten on your machine. If you don't already have it I would suggest you download and run this Malwarebytes Anti-Malware - Reviews and free Malwarebytes Anti-Malware downloads at Download.com it is free.

Do you have any Anti Virus software at all ? If so download the latest updates for it and also run that.

Post back with your finding and we can go from there.



Steve

2 more replies
Relevance 57.4%

Greetings Gents


? Windows 7 ultimate
? x64
? it was vista upgraded to 7
? full retail version
? 2009
? 2010
? Intel(R) Core(TM)2 Quad CPU Q9100 @ 2.26GHz
? NVIDIA GeForce GTX 260M
? Alienware M17x
? FLEXTRONICS 19.5 v *12.3 a = 239.85 w

Summery:
out of sudden when i playing mkv or .avi media it stopped working and force me to total shutdown the system. To be precise, I never faced the BOSD; yet I know it the same/equivalent to it. I am seeking your help gents :D

kindly find the attached

thank you & your rapid response is highly appreciated.

Answer:BSOD - Event ID 6008 Previous Shutdown was Unexpected - need total shutdown

Hi -

Most of the 11 BSODs list NVIDIA video as the probable cause.

1. Update your NVIDIA video drivers -

Code:

nvlddmkm.sys Tue Mar 16 22:00:40 2010 (4BA037C8)
nvBridge.kmd Tue Mar 16 21:31:37 2010 (4BA030F9)

NVIDIA --> http://www.nvidia.com/Download/index.aspx?lang=en-us

One of the BSODs had a bugcheck = 0x124 = WHEA = Windows Hardware Error Architecture - potential hardware failure

Info on 0x124 --> http://www.sevenforums.com/crash-loc...-what-try.html

2. Remove Daemon Tools/ Alcohol 120. A driver common to both sptd.sys is known to cause BSODs.

3. Update your ESET installation to v4.2.64.12 --> http://www.eset.com/download

You need device driver updates. Alienware Support sends me to Dell Support -

http://support.dell.com/support/down...nConsent=False

4. Update all device drivers - chipset (NVIDIA & Ricoh), audio, network. DO NOT download the NVIDIA Video driver from Dell - go to NVIDIA Support per step #1 above.

Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip


If BSODs persist after driver updates, run the Driver Verifier --> http://jcgriff2.com/driver_verifier.htm

Regards. . .

jcgriff2

`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 21:36:50.639 2010 (GMT-4)
System Uptime: 0 days 3:49:08.761
*** WARNING: Unable to verify tim... Read more

2 more replies
Relevance 52.48%

Faulting application name: taskeng.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d2c
Faulting module name: svrltmgr.dll, version: 0.0.0.0, time stamp: 0x584f2bca
Exception code: 0xc0000005
Fault offset: 0x000000000021f7d3
Faulting process id: 0x1860
Faulting application start time: 0x01d29e6dedebd9b9
Faulting application path: C:\Windows\system32\taskeng.exe
Faulting module path: C:\Windows\winipbin\svrltmgr.dll
Report Id: e0417759-0a61-11e7-9c07-0050569f7630

Task Scheduler crashes and the program closes. Need help

More replies
Relevance 52.07%

I bought a Toshiba Satellite M645 running Windows 7

When I received it I pressed the power button and the light would come on, the fan would run, the screen would stay off, for about 5 seconds and then the light would go off, a click would sound and the fan would turn off.

I sent it to Toshiba Depot and they fixed it.
I got it back and get it all set up cool.

Then it starts turning off in the middle of using it. Totally spontaneous and not associated with any particular program I use. The screen first goes black and then one of a few things happens.

1. The power light remains on and if I move the mouse enough the screen might come back on and I will be logged out of Windows.

2. The power light turns off and fan turns off but the computer attempts to turn back on. This rarely succeeds and an audible click can be heard following each attempt. I am not touching anything.

3. The power light turns off and the computer shuts down completely. When I can get it to come back on my icons are always rearranged.

When it does shut down completely I am greeted by either the "windows did not shut down correctly" screen or "there was a problem launching windows" repair options screen if I can get a reboot to work. Often times after the problem occurs and I turn the computer back on it takes several times before it seems to "catch" and load Windows but often I'll press the button, the system will begin to start up but it will not make it to ... Read more

Answer:Spontaneous "shutdown" or sleep while using Windows 7

Do you have a set of Toshiba recovery disks? The newer models will ask you to make them from a setting under My Toshiba in the Programs menu.

Backup your stuff and restore the OS. If the problems continue, then it's most likely a hardware problem.

3 more replies
Relevance 51.25%

Description:
Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

For more information, see Help and Support Center at
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 36 30 2c 20 000060,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 62 61 36 30 00, ba60
0050: 35 37 38 63 578c

Some body can help me ?
 

Answer:Random restarts Source:System Error Event Category: (102) Event is 1003

Inside the 1 MiniDump:




BugCheck 100000D1, {60, 2, 0, ba60578c}
Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

Uninstall the nvidia drivers from the control panel
Download and install the latest drivers
 

2 more replies
Relevance 51.25%

when I run reboot stress test at Intel platform with win10 Desktop RS1 version, after some cylces test, XHCI controller show yellow bang. Event viewer showed that event id is 14.  I want to know the indication of
StartDeviceFailReason equals 3. I cannot find more info about this failure from website.Thanks a lot!









-

Provider











[
Name]
Microsoft-Windows-USB-USBXHCI










[
Guid]
{30E1D284-5D88-459C-83FD-6345B39B19EC}




















EventID
14



















Version
0



















Level
2



















Task
0



















Opcode
0



















Keywords
0x8000400000000000

















-

TimeCreated











[
SystemTime]
2016-11-25T19:48:29.908393500Z




















EventRecordID
7099


















Correlation

















-

Execution











[
ProcessID]
4










[
ThreadID]
232




















Channel
System



















Computer
LAPTOP-QQEHB4HS

















-

Security











[
UserID]
S-1-5-18












-

EventData










fid_UcxController
0x187f9ddd64a8







... Read more

More replies
Relevance 51.25%

Good Evening,

My PC is steadily failing with a variety of blue screen errors -

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 07/10/2010
Time: 00:06:29
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 1000000a, parameter1 806f8360, parameter2 000000ff, parameter3 00000008, parameter4 806f8360.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 30 eters 80
0030: 36 66 38 33 36 30 2c 20 6f8360,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 38 2c 20 38 30 36 66 08, 806f
0050: 38 33 36 30 8360

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 06/10/2010
Time: 22:23:54
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 10000050, parameter1 e4733000, parameter2 00000000, parameter3 80582627, parameter4 00000001.


Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 10... Read more

Answer:System Error - Event Category (102) - Event ID 1003 Windows OS

are these errors occurring out of the blue or do they happen when you run certain things? did you recently install new drivers or updates? posting the full specs of your machine and which operating system would also be helpful.
 

5 more replies
Relevance 51.25%

So basically my pc restarts whenever it wants its getting really annoying, it comes up with serious error and it either says its device drivers or ram, but ive tested my ram with the windows diag and mem test with no errors, and ive updated all my drivers, so im not sure, any help would be muchly appreciated,

this is from the event viewer, ill have to post a copy of my next serious error report and anything else that would be helpful, thanks and plz plz plz help


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/21/2007
Time: 2:34:13 AM
User: N/A
Computer: EZMIKE
Description:
Error code 1000008e, parameter1 c0000005, parameter2 805607c5, parameter3 f3283a84, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 35 36 30 37 63 35 805607c5
0040: 2c 20 66 33 32 38 33 61 , f3283a
0048: 38 34 2c 20 30 30 30 30 84, 0000
0050: 30 30 30 30 0000
 

Answer:System Error - Event Category (102) - Event ID 1003 Windows OS

got these last 4 minidumps too
 

3 more replies
Relevance 50.84%

Pre-existing problem here: techspot.com/vb/topic137608.html
Basically that problem is my pc freezing up and restarting.

Oone occasion, after the restart of my pc I started doing what I regularly do. After I was done, I shut it down.

Next morning, I turn on my pc, boot up and everything was fine, but I recieved an additional dialog box saying my pc has recovered from a serious error (dont know why it came up, and if it should come up, shouldnt it have come up after the auto restart ?)
Heres the log in event viewer.

Source: System Error
Category: (102)
Event ID: 1003

Error code 000000ea, parameter1 88568b30, parameter2 89269208, parameter3 8907f110, parameter4 00000001.

In bytes:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 65 000000e
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 38 eters 88
0030: 35 36 38 62 33 30 2c 20 568b30,
0038: 38 39 32 36 39 32 30 38 89269208
0040: 2c 20 38 39 30 37 66 31 , 8907f1
0048: 31 30 2c 20 30 30 30 30 10, 0000
0050: 30 30 30 31 0001






Any solutions?
Thanks
 

Answer:Spontaneous Error code 000000ea

A little more information would be helpful.
Like your system specs... and OS.
In short, it looks like it is probably a video driver issue, and you may find it helpful to update your drivers.
I would suggest trying these for your drivers...
1. Windows update service, doing a manual update, checking for your optional vs high priority updates.
2. The maker of your computer, if it is onboard graphics.
3. The maker of your graphix adapter, if it is a video card.
I would not suggest websites like driver detective.
They are sometimes worse than useless, really messing up your system.

If these do not help, try re-posting - with
your system specs, and also
a zip of say (up to) five of your most recent minidumps.

Probably Route44 or one of the others will be able to help you, when you supply this information.
 

8 more replies
Relevance 50.84%

Hi All,

Thanks in advance for your help with this. Yesterday while trying to log on to "Go To Meeting", I got the blue screen and it said that my computer had to shut down. The error message was bad_pool_caller. Then futher down it said stop with 3 or 4 data strings. The following was highlighted in red: 0x89c32008. Am I infected again?

Lisa

Answer:Spontaneous Shut Down & Weird Error Msg.

As that error is unfecogniseable,let's get a scan log.Next run MBAM (MalwareBytes):Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and cl... Read more

6 more replies
Relevance 50.43%

Hello, I recently tried to filter events of the .NET runtime provider by their event ID. This should be accomplished through enabling the .NET runtime provider with
EVENT_FILTER_TYPE_EVENT_ID flag being set in the EVENT_FILTER_DESCRIPTOR structure, unfortunately the
EnableTraceEx2 function returns 87. If I try to enable the provider with the
EVENT_FILTER_TYPE_SCHEMATIZED flag instead of the EVENT_FILTER_TYPE_EVENT_ID, the provider gets enabled so I came to the conclusion that the
EVENT_FILTER_TYPE_EVENT_ID is the invalid parameter.

Enabling the session:
The LogFileMode member of the EVENT_TRACE_PROPERTIES
structure is set to EVENT_TRACE_FILE_MODE_CIRCULAR, EVENT_TRACE_PRIVATE_LOGGER_MODE
AND EVENT_TRACE_PRIVATE_IN_PROC (<- supports this mode scoped filters?).

According to
MSDN enabling scoped filters should be possible for private logging mode sessions or am I missing something?


Useful MSDN links:

Logging Mode ConstantsEVENT_TRACE_PROPERTIES structureSystem Error CodesEVENT_FILTER_DESCRIPTOR structure including filter typesWhat's New in Event Tracing (includes scoped filter availability statement)

More replies
Relevance 50.43%

I have updated Windows 10 Pro to the Creators update. I have had a few event viewer errors which I managed to fix. But I don't know what this one is, I guess everyone is seeing it, does anyone knoe how is it resolved? Thanks.

"Windows Hello for Business provisioning will not be launched.
Device is AAD joined ( AADJ or DJ++ ): Not Tested
User has logged on with AAD credentials: No
Windows Hello for Business policy is enabled: Not Tested
Local computer meets Windows hello for business hardware requirements: Not Tested
User is not connected to the machine via Remote Desktop: Yes
User certificate for on premise auth policy is enabled: Not Tested
Machine is governed by none policy."

Answer:W10 Creators update Event viewer error Event ID 360

Only workaround if you are fine with it.
Managing Windows 10 Creators Update rollout for a seamless experience - Page 7 - - Windows 10 Forums

1 more replies
Relevance 50.43%

Hello,

I just built a brand new i7 920 System.

Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
Antec Veris Control Panel

Problem:

Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).

Answer:System keeps Restarting Event Log: Critical Error - Event ID 41

Check the Event Viewer. Start>Run>eventvwr.msc

Tell us what errors you find in there. Without any real information about if it is caused by a BSoD or something that is running or just going into standby we cant really be of help till we try to narrow it down.

9 more replies
Relevance 50.43%

Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

Answer:Event Viewer Error Message Event ID11 - How do I get rid of this to?

Does anyone have any ideas on how to get rid of this error message in Event Viewer?

2 more replies
Relevance 50.43%

I keep getting this error message in the application log of the event viewer.



I haven't been able to figure out which application I run which produces this error. It might be Windows Defend when it scans. I'm really not sure though. Can anyone give me any insight to this error.

I have Googled this, but nothing I see makes any sense to me. Maybe someone can simplify it for me. Thanks.
 

Answer:Userenv, Event 1000 Error in Event Viewer

HI!
This helped me when I had the same problem...check it out.
User Profile Hive Cleanup Service
http://www.microsoft.com/downloads/...6D-8912-4E18-B570-42470E2F3582&displaylang=en





Overview
The User Profile Hive Cleanup service helps to ensure user sessions are completely terminated when a user logs off. System processes and applications occasionally maintain connections to registry keys in the user profile after a user logs off. In those cases the user session is prevented from completely ending. This can result in problems when using Roaming User Profiles in a server environment or when using locked profiles as implemented through the Shared Computer Toolkit for Windows XP.

On Windows 2000 you can benefit from this service if the application event log shows event id 1000 where the message text indicates that the profile is not unloading and that the error is "Access is denied". On Windows XP and Windows Server 2003 either event ids 1517 and 1524 indicate the same profile unload problem.

To accomplish this the service monitors for logged off users that still have registry hives loaded. When that happens the service determines which application have handles opened to the hives and releases them. It logs the application name and what registry keys were left open. After this the system finishes unloading the profile.Click to expand...

Hope it works as well for you!

 

3 more replies
Relevance 50.43%

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

Answer:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

5 more replies
Relevance 50.43%

Welcome,
I have a problem. Every day I have this error in event viewer, system log:
{Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\S-1-5-21-4089430802-3287748835-2730757419-1001-0-ntuser.dat was corrupted and it has been recovered. Some data might have been lost.
This error repeats every day at about 3:00AM.
Maybe someone could help me? Thanks in advance.

Answer:Event ID 5 Kernel-General error in Event Viewer

Hi:

Just curious:
Are you running MBAM Premium (paid version), or Free?If it's Premium, what time does your scheduled daily Threat scan run? (Assuming you are running a daily Threat scan, which is the default scan schedule.) (Dashboard > Settings > Automated Scheduling > Threat Scan > Edit)

Thanks,

MM

7 more replies
Relevance 50.43%
Question: Shutdown Event

Hardware: IBMPentium(R) 4 CPU 2.6GH1.99 GHz1 GIG RAMXP HOME VERSION SP3Error message I keep getting: "Event provider attempted to register query "%1" whose target class "%2" does not exist.  The query will be ignored."Explanation: "An erroneous dependcey for the class in the query no longer exists, a missing class definition."This has occurred with Firefox crashing, Internet Explorer crashing (not as often), other programs.  After rebooting, it usually runs a checkdisk and reinstates "orphan" files, or repairs corrupt files.In the viewer logs AVG anti-virus keep popping up prior to a shutdown event and I've heard somewhere that it's no longer recommended.  I know that every time I come back from the reboot, AVG needs another complete update.  It's as if information is being wiped out, so that computer can't make the connection and crashes.The User Action says: 1. Compile the definition for the target class into the WMI repository by compiling the class povider mof file.2. Reinstall the program.  Relevant mof files are automatically complied when a program is reinstalled.This is obvious being managed by the Windows Management (Inventory?)Anyhow, I don't know what an mof file is.  If it's AVG that's causing this, or it's a clash with other programs, maybe that's it.  I have some freeware: Spyware Guard, Spybot Search & Destroy, Spyware Blaster, F... Read more

Answer:Shutdown Event

I think your regisrty is locked so AVG can't complete a update. It sounds like it deleted or uninstalled some files and you regisrty is still pointing to them.Spybot Search & Destroy locks the regisrty. You can try to uninstall it and than try to run the update for AVG to see if it takes. If not than uninstall it and do a reinstall.Let us know how you make out.

3 more replies
Relevance 50.43%

I am getting really frustrated with my homemade computer. I get random re-boots. There doesn't seem to be a rhyme or reason to what causes them. My event log says this:

Error code 0000009c, parameter1 00000000, parameter2 bab44050, parameter3 b2000000, parameter4 1040080f.

I've swapped out the memory, not the problem. I've swapped out the motherboard, not the problem. This happened when I ran Ubuntu and now again while running Windows XP. Any suggestions as to what I should try to test next?
 

Answer:Spontaneous Rebooting - Error code 0000009c

Most common cause is video card, or video graphics drivers... for both Ubuntu and WXP
 

6 more replies
Relevance 49.61%

Hi,
I have a file which has been working without any problems until today:

Out of the blue the code below gives me the the following error

Run-time error 1004, Unable to get Object Property of OLEObject class
Code:

Public Sub clearbuttons()
Dim answer As Variant
Dim RadioButton As OLEObject
For Each RadioButton In ActiveSheet.OLEObjects
[COLOR="Red"][B] If TypeName(RadioButton.Object) = "OptionButton" Then[/B][/COLOR]
RadioButton.Object.Value = False
End If
Next RadioButton
End Sub

Nothing has been changed in the past week, I did not install or remove anything.

No compilation errors, just the errro message and it stops at the red row

The file (zipped) is too big to attach. but maybe someone can tell me what might be the problem.
All my other files containing a large ammount of vba code an complicated stuff work fine, just this one.
 

Answer:Solved: Excel (2010) Weird spontaneous error

12 more replies
Relevance 49.61%

My friend's fairly new Win 8 computer is rebooting on its own a few times a day. It has also given a Visual C++ Runtime error for C:\Windows\explorer.exe "this application has requested the runtime to terminate it in an unusual way".

I've run chkdsk /r, it found some errors in phase 3 and fixed them. I ran sfc /scannow, it found corruption but could not fix it. I ran DISM, it repaired the corruption it found. Then I re-ran sfc, it came up clean at that point. But the issue remains. Any suggestions?

Thanks

Answer:Visual C++ Runtime error explorer.exe, spontaneous reboots

Next thing I'd do is download a copy of memtest86+ and let that run overnight. I'd also figure out what brand HDD is in the unit and go to the manufacturer's site, looking for any diagnostic tools they may have. It also couldn't hurt, making the assumption that your friend isn't overly technical (since they are coming to you for help), doing a thorough scan for malware using multiple programs would probably also be in order. There still tend to be gaps or blindspots in each individual program, so what one misses another might pick up.

1 more replies
Relevance 49.61%

My 3 week old HP laptop is booting up and shutting down very slowly.Have tried all the usual cleanups and start up program disable stuff but it's as slow as ever. It's got AMD Turion x2 cpu and 2gb Ram surely it shouldn't be this slow?Anybody any idea? Event log keeps coming up with event log 100 on start up and event log 200 on shutdown stating both these processes are taking too long, but how do i fix it???

More replies
Relevance 49.61%

.Windows 7 Ultimate
.64 bit
.Original System installed windows 7 home premim
.Came pre installed but upgraded to ultimate
.System hardware age? I bought this new 4 months ago yes reinstalled os from factory defaults using recover OEM windows & then upgraded with anytime upgrade to Ultimate

CPU AMD 1000 mhz X 2
Motherboard?
Power Supply?

Toshiba
Model Number C655D-S5200

Answer:Event ID 41 system shutdown

Hi -

No BSOD dumps are present in the zip file.

When does the system shutdown, e.g., gaming, video, etc...?

Check temps - Speccy - FileHippo.com - Download Free Software

Be sure to keep the laptop elevated for airflow.

Have you contacted Toshiba Support?

Regards. . .

jcgriff2

`

3 more replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Hello, I have an x61s running Windows Vista business (32 bit).  I'd like to be able to close the lid while the system is shutting down. That is I initiate a shutdown by selecting "shut down" from the Windows Start menu, and then I close the lid of the notebook, without waiting for the sutdown to complete. Problem is that closing the lid makes the notebook go into sleep mode, even if a shutdown has already been initiated. Does anyone know how I can avoid this, so that the system will continue to shut down even though the lid is closed in the process? That would be most useful, because when I decide to shut down my computer, I want to close the lid immediately.  However, if I close the lid during regular operation (not in a shut down scenario), then I don't want the system to shut down; In this case the system going to sleep following the lid close event is fine. I tried setting a "Lid closed action delay" of 2 minutes (in power manager, global power settings, advanced settings for the "lid closed" event), but this does not seem to work, the system still goes to sleep immediately after I close the lid.Message Edited by astra4 on 12-17-2008 08:22 PM

More replies
Relevance 49.61%

I boot system. I sign in.....system shuts down all by itself. When I re-boot it tells me it failed to to "Thermal Event" and tells to be F1 to continues.

What is "Thermal Event"?

Answer:Thermal Event Shutdown

Hello,

It basically means that your system overheated and shut itself down so as not to damage any components.
Reasons for this range from dust on the heatsink or a fan not spinning to heatsink not being seated correctly.

What is the make/specifications of the system and roughly how old is it?

3 more replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Several times over the last few weeks, I noticed that my computer (Dell Optiplex 9020) had rebooted while left on overnight. Then today, without warning, the light blue (not BSOD) WIn 10 Restarting screen appeared while I was doing something noninvasive, like checking email. Then the system rebooted.

The event viewer offered the following clues:

Event ID 109
The kernel power manager has initiated a shutdown transition.
Shutdown Reason: Kernel AP

Event ID 1074
The process C:\WINDOWS\system32\winlogon.exe (MARK-9020) has initiated the restart of computer MARK-9020 on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
I would be very grateful to hear back from members who have solved this problem.
Thanks!

More replies
Relevance 49.61%

Windows 10 Home 64 bit
ASUS X540LA Notebook

What is going on here and what is the best for dealing with this? The AppID seems to be designating RuntimeBroker, but I have done everything so far to correct this error. What am I missing?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/4/2016 7:05:24 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DESKTOP-EOB6C9K
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<T... Read more

Answer:Event Error ID 10016 in Event Viewer...

There are fixes on the forum if you search for this error. The solution involves changing permissions and editing the registry and should only be attempted if you are sure of what you are doing.

See:
Windows 10 Event ID 10010 and 10016 Errors With DistributedCOM
http://www.eightforums.com/performan...ro-64-bit.html

4 more replies
Relevance 49.61%

Greetings,

I have a large number of the following errors in my event viewer:
Level|Source|Event ID|Task Category
Error|spdt---|------4|--- none

General--
Driver detected an internal error in its data structures for .

Details--
__________
XML View--
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="sptd" />
<EventID Qualifiers="49156">4</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-25T05:25:52.106802800Z" />
<EventRecordID>83268</EventRecordID>
<Channel>System</Channel>
<Computer>adm-PC</Computer>
<Security />
</System>
- <EventData>
<Data />
<Binary>000000000100000000000000040004C0530000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
__________
Here is the Friendly View--
-System
-Provider[ Name] sptd
-EventID4[ Qualifiers] 49156
Level2Task0Keywords0x80000000000000-TimeCreated[ SystemTime] 2011-06-25T05:25:52.106802800Z
EventRecordID83268ChannelSystemComputeradm-PCSecurity
-EventData
000000000100000000000000040004C0530000000000000000000000000000000000000000000000
Binary data:

In Words
0000: 00000000 00000001 00000000 C0040004
0008: 00000053 00000000 00000000 00000000
0010: 00000000 00000000

In Bytes
0000: 00 00 00 00 01 00 0... Read more

More replies
Relevance 49.61%

I have a pavilion desktop h8-1075, and have found the following comes up in error of event viewer every so often

iaStor did not respond within the timeout period event 9

any assistance would be great to see if someone can cure this issue

Pavilion Desktop hpe h8-1075uk
Win 7/Pro
16 Meg ram

Tony Miller

Answer:Event Viewer error iaStor Event 9

Iastor is your storage driver (for HD or Raid) and often a driver will not respond within the normal range. No big deal but you can update the driver to newest version to see if that eliminates the messages

2 more replies
Relevance 49.61%

Please advise what this error might be I've started getting several times a day:

Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 21/11/2015 14:14:07
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer:
Description:
Session "" failed to start with the following error: 0xC0000011
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2015-11-21T14:14:07.333968800Z" />
<EventRecordID>5752</EventRecordID>
<Correlation />
<Execution ProcessID="6760" ThreadID="5300" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Swale</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data ... Read more

Answer:What is Error Event 2 Kernel- Event Tracing?

Any ideas what this maybe due to?

3 more replies
Relevance 49.61%

Windows 10 Home 64 bit
ASUS X540LA Notebook

What is going on here and what is the best for dealing with this? The AppID seems to be designating RuntimeBroker, but I have done everything so far to correct this error. What am I missing?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/4/2016 7:05:24 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DESKTOP-EOB6C9K
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<T... Read more

More replies
Relevance 49.61%

The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance.

Just browsing through my Event Viewer trying to knock out and solve any random errors when THAT pops up a few times a day. Could anyone give a clue as to what it means? Hardware or software issue?

Answer:Event ID Error Event 137, Kernel-Power

Well (S4) is hibernation.

You could run a test by shortening your hibernation setting, make sleep after 15 and hibernate after 30, then stop using it and note wall clock time. Calculate when it will drop into hibernation. Wake it up fifteen minutes after it should have hibernated and see if the event coincides with the machine changing from S3 to S4.

To confirm your machine supports all the necessary sleep states at command prompt(admin) type

powercfg -a

10 more replies
Relevance 49.2%

Hello and thank you for viewing my first post, I just gave up all hope on trying to fix my BSOD(s) that i've been experiencing and figured someone here would hopefully help me out.

I just recently re-installed my OS on my system and after about 6 hours of trouble free i suddenly got a BSOD while surfing the internet. Ive attached the mini-dump to this post.

the system is about 2 years old now other than the new CPU cooler that i just installed a couple months back.

SPECS:
x64 bit
re-installed OS yesterday (april 29th 2012)
full retail version
hardware is 2 years old
age of installation is 12 hours

I think thats all i have to say, sorry if i missed anything, this is my first post on the forum and i can reply to any questions asap, thanks again!

Answer:[BSOD] surfing on internet all brow, sometimes spontaneous, error 0xC1

Before we can even examine the underlying issue you need to update your asacpi.sys. Yours is from 2005

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

6 more replies
Relevance 49.2%

Hi there,

I have had this PC for about three months and this is something that happens about 3 times a week. I'll come into the room and try to get it out of sleep mode, and then realize it has shut down yet again. When I check the details, here's what I get. I'm not a computer technician but it would be great if someone could take a look at this and see if they can determine the cause.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006E47060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA8004DF4C10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\040110-43680-01.dmp
C:\Users\Miseta\AppData\Local\Temp\WER-72649-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BlueScreen event and random shutdown

Hello Welcome to SF,

Please post us the Dump file http://www.sevenforums.com/crash-loc...d-problem.html

Good Luck,
Captain

5 more replies
Relevance 49.2%

Got these on my shutdown last night, I don't think I have got them before. What are they exactly?

The NgcCtnrSvc service was unable to log on as NT AUTHORITY\LocalService with the currently configured password due to the following error: The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
The Microsoft Passport Container service failed to start due to the following error: The service did not start due to a logon failure.

More replies
Relevance 49.2%

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

More replies
Relevance 49.2%

My currently up to date windows 10 pro machine has been restarting very very frequently after I've left it for a goodly while, including nearly every night, and in trying to figger out why this is happening, I learned about this option, Display Shutdown Event Tracker. It's supposed to be in the Local Group Policy editor, but I do NOT see an option named that. I'm an admin on my machine, so I'm not sure why I can't see it, unless it's not there any longer? Moved? Who knows? I did locate the .msc for GP, and ran it explicitly as an admin, but nada. Someone had mentioned looking at the user32 events in the regular event viewer, but this is all I see there:

"The process C:\Windows\System32\RuntimeBroker.exe (LAPTOPNAME) has initiated the restart of computer LAPTOPNAME on behalf of user LAPTOPNAME\MyUserName for the following reason: Other (Unplanned) Reason Code: 0x0 Shutdown Type: restart Comment:"

Any thoughts anyone?

TIA
elaine

More replies
Relevance 49.2%

I tend to run my computer 24/7, but within the last 3 days, I had my computer shutdown while I was away with an Event ID 109 with the following reason:






The kernel power manager has initiated a shutdown transition.

Shutdown Reason: Battery



Thing is, I am on a desktop computer, not a laptop with a UPS connected. And it is an APC UPS with Powerchute Personal Edition installed. Although this is a Windows 7 to Windows 10 upgrade with Powerchute Personal Already installed. Does anyone know of a reason why Kernel-Power is shutting my computer down for this battery reason?

Answer:Windows 10 Pro Desktop Shutdown with Event ID 109

Hi:

Until someone more expert arrives...

What does the PCPE dashboard tell you?
Are you hearing any beeps from the APC UPS?
How old is the APC UPS?
Are you sure everything is plugged in and working properly, including the data cable from the back of the PC tower to the UPS?

Reason for asking: I had a relatively new APC UPS fail after only a few months several months ago.
It was under warranty and, after calling Schneider Electric, they RMA'd the whole unit (not just the battery), no questions asked. They sent a brand new one in 2 days.
(After many years of using their products, this was a "first". But I was pleased to find that they took care of it with zero fuss. The only chore was having to haul the old unit to the UPS store for the return shipment.)
Just a thought.

MM

7 more replies
Relevance 49.2%

I am running Windows XP-Home. All of a sudden when I want to shut down my computer I get a box that comes up and it's for "shutdown event tracker". I never had that before and I would like to just be able to select either shutdown/restart/etc. not having to put in why I am shutting down.

What I read is that this was originally for Windows 2000 but in Windows XP this was shut-off. If that is so - why do I get that pop-up?

In the help area this is what I found:
"On Windows 2000 Server products, you will be prompted to supply information regarding why you are shutting down or restarting the computer. This feature is turned off in Windows XP."

How can I get this turned OFF?
 

Answer:Shutdown Event Tracker Question

How to enable and disable Shutdown Event Tracker
1.To open Registry Editor, click Start, click Run, type regedit, and then click OK.

2.In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Reliability

3.Name:ShutdownReasonUI
Type:REG_DWORD
Value:1=enable;0=disable
 

3 more replies
Relevance 49.2%

Hey,

I recently had a random shutdown while using Google Chrome.

All I have is the minidump but no way to read it.

There seems to be no record of the crash in my event viewer.

I checked my ram, PS, HD and Gfx card and they all seem to be in working order.

This is a brand new rig that I built so I am thinking it's software related but I want to make sure.

What should my next step be?

Answer:Single Random Shutdown - No Event

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

34 more replies
Relevance 49.2%

I plug in a flashdrive, scan it, copy a few files, pull it out (it had 3 files on it, never have viruses. Never.). Windows suddenly decides to shutdown. Waited :30 sec, rebooted, logged in and went to Event Viewer>System and filter for 6008 events. Zero, no listings. Can't find anything in the past 20 minutes that looks like a shutdown.

What gives? How can Event Viewer not show the shutdown? How can I find out what the burp was? I've had no issues lately (since a new card in July), Windows has been flawless. I hate it when Windows does something like this and I can't track it down.
Thanks in advance for any interest,

Surviver

More replies
Relevance 49.2%

I have been encountering slow shutdown times on my desktop recently. I looked in the event logs to try and find some clue but they were not that helpful to the less than technically minded

1: EVENT_TCPIP_TCP_CONNECT_LIMIT_REACHED
I had a lot of the above that were listed both as information and warning

2: also W32time came up several time as both info and warning

3: NetBT came up several times - with
"the name MSHOME could not be registered on the interface with IP address xxx, the machine with the ip address yyy did not allow the name to be claimed by this machine.

The only hardware I have installed recently is a Belkin wireless card (whose problems I have posted elsewhere ) This may have something to do with it but I am not sure. Briefly my setup is a wireless laptop (no problems) and a wired desktop (which has been re-configured to run on wireless)

I am running Windows XP pro with SP2 on an AMD system with 2 gigs ram

I have run several virus checks and I run spybot regularly, I have a belkin router to connect through to my blueyonder broadband.

Any advice?
 

Answer:XP very slow shutdown - event logs

13 more replies
Relevance 49.2%

I moved this post from general discussions where it got completely buried.

I'm sure every one of us is getting these errors in windows 10

This appears to be a general issue with windows 10, I always get the following errors on shutdown:

The VMware Workstation Server service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

The User Data Access_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

I suspect the Event ID 7031 Service Control Manager errors occurred initially in windows 8.1 upgrade and was resolved by Microsoft. It looks like the problem is back especially with the new windows 10 services (with the exception of the VMWare Workstation server)

I suspect this error also affects shutdown/reboot times.

Ideas anyone how to resolve this

Answer:Event Log 7031 Errors on Shutdown

getting this also - on laptop and home pc

1 more replies
Relevance 49.2%

Windows 10 64 bit, latest version, is working fine on my Toshiba i7 laptop with 8 Gb ram. But I have problems with shutdowns when I click on restart. It seems to take far too long to shutdown. I am not sure how to find out why but when checking out the event viewer, I found several shutdown errors (some critical and some warnings). So I got the following screen shots (not sure how I got there) which seem to reveal several errors during shutdown. When I click on the web link I get a non working website.

Question:
1. How do I find out what is making shutdowns so slow when I click restart? (I "think" Shutdown seems faster if I just click on shutdown instead of restart)
2. What problem do these screenshots of error indicate and how do I fix them?
Thank you
Edit:
Got to those screens: Control Panel - Administrative Tools - Component services. Event viewer(Local) -Applications and Services Logs - Microsoft -Windows - Diagnostics Performance - Operational.

Here are some recent error screenshots which occur in both shutdown and bootups.
As can be seen this is a problem that goes back to 2016.

More replies
Relevance 48.79%

Well it seems that I've managed to get infected with something (or somethings).

A few days ago I began noticing a general slowdown of my system. Programs taking longer to load, right-clicking anything having the tendency to lock things up (sometimes temporarily, sometimes requiring a restart), restarts taking ~10 minutes, if they worked at all, for example (occasionally they would lock up mid-restart).

Yesterday it all seemed to go to hell, as I noticed that my audio playback had ceased (using any program, WMP, foobar2000, etc.) Also, while I can get video files to play, I get no audio playback in video feeds as well. On a whim, I rebooted, only to be given a windows bluescreen to the effect of "The Disk is Dirty, Checking...". It ran 3 stages worth of "CHKDSK" and appeared to find (and fix?) a few errors, and then started Windows. (I'm sorry that part isn't more specific but I didn't have enough time to write it down verbatim as it was happening).

Anyway, once rebooted I was greeted with a RUNDLL error that said exactly: Error in C:\WINDOS\System32\spool\DRIVERS\W32X86\3\DLCCtime.dll Missing entry:RunDLLEntry.

Also, and perhaps most disturbing, every time I reboot I have to re-enable Symantec Endpoint Protection, which at the moment is alerting me that its file system defense is malfunctioning. [edit: and now, a few minutes later, after no actions of my own, Symantec is reporting all systems go, but Windows Security Center is poppi... Read more

More replies
Relevance 48.79%

System : Dimension 3000 Hello, i'm having a problem with my Mother's computer. It is shutting down (completely powering off) and will not come back on for several hours, sometimes days. When it does power back on, before booting into windows, i get an error message that reads: Alert! Previous shutdown due to thermal event. I do not know what the problem is, both the case fan and power supply fan work properly and i have removed all of the dust from inside the case, including from the cpu heatsink. The case is not missing any expansion slot covers either. When i check the logs in the bios nothing is showing up at all. The computer is out of warranty and i'm stuck on what to do? thanks.

Answer:Alert! Previous shutdown due to thermal event

jholty
Have you checked, that the front panel air intake is clean?
Open the case and check that both the processor and chipset heatsinks are still firmly attached to the motherboard.
Bev.

14 more replies
Relevance 48.79%

Hi, i have just done a fresh install of win 7 and all was normal for 7 days with no errors in the event log but now on every start up i get the above error in the event log and don,t know how to trace it.After hours of googling i came upon a thread where you had helped someone else with the same problem.Thanks in advance for any help you can lend me.  Regards mark

Answer:Event ID 6008 The previous shutdown was unexpected

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy,  taking care to post the link of the snapshot in your next post.
   Go to Piriform's website, and download the free version on the left.  Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
    After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
 
     Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
     Now, at the top, click File > Publish Snapshot. You will see the following prompt:
 &n... Read more

4 more replies
Relevance 48.79%

Hi, i have just done a fresh install of win 7 and all was normal for 7 days with no errors in the event log but now on every start up i get the above error in the event log and don,t know how to trace it.After hours of googling i came upon a thread where you had helped someone else with the same problem.Thanks in advance for any help you can lend me.  Regards mark

Answer:Event ID 6008 The previous shutdown was unexpected

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy,  taking care to post the link of the snapshot in your next post.
   Go to Piriform's website, and download the free version on the left.  Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
    After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
 
     Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
     Now, at the top, click File > Publish Snapshot. You will see the following prompt:
 &#... Read more

2 more replies
Relevance 48.79%

Hi

Please can you help me a friends computer keeps having the BSOD mentioned above i have attached the required log if you could help

Cheers
Andy

More replies
Relevance 48.79%

So I've been in the process of putting together a HTPC. It's a little Habey 800B case with a ASRock E350-M1 motherboard running W7 64 bit. I havent had any issues with it while installing Windows or any of the misc programs (Office, MSE, XBMC, etc). But I recently turned it on in the morning and was going to let it run all day so that I could remote to it from work and work on it when I had a few free minutes. But when I got to work and finally got some time, it showed as being offline??? I figured that it had gone to sleep. So the next day I connected a monitor/keyboard/mouse to it, booted it and it showed that Windows had shut down unexpectedly. I selected the "Load Windows normally" option and then set the power options to "never" sleep. I attempted the same thing the next day, and again it was off when I tried to connect to it???

It took me a few days to get back to looking at it. After booting and messing around with it for a bit it seemed a bit sluggish and froze once, requiring a manual reboot. I checked the Event Logs and took as many screen shots as I could. I posted the screen shots below hoping that someone can give me some info from the Event log info.

Someone here at work suggested I search for the .dmp files to see if they would give any further info. Thanks in advance for any assistance.





This is the full text from the above User Profile Service error.


Also the last couple of times I manually rebooted, I got t... Read more

Answer:Event viewer info after a HTPC shutdown

Looks like a disk error to me. You had an error in your event log regarding a disk error, and you had a few boots that were disk related, too.
 

7 more replies
Relevance 48.79%

Server 2003 has a Shutdown Event Tracker that requires that you "best describe why you want to shutdown the computer". It is on by default, but can be turned off using Group Policy.

Wonderful!

Somewhere along the way, one (and only one) of my XP machines (SP2 + all updates) acquired that same "feature". The Group Policy trick mentioned above has no relevance in XP, so I can't stop this event tracker that way.

Among other things, it makes a remote shutdown impossible (unless I use an RPC terminal). Besides, it's a pain to have to type in a reason (usually "Windows F%#*ed up again") when all I want to do is to shutdown or reboot.

If it runs as a service, I can't find it in either "Services and Applications" or in "Sysinternals Process Explorer"

And another thing!!! I can't find the logged events in the Event Viewer for Application, Security, or System.

If I could find it, I'd drive a stake through its heart. How do I kill the beast?

To prove that I've taken my meds today, here's a screen dump:

Askme nicely and I might explain how I got a screen dump of an XP computer part way into shutdown.

Thanks in advance.
 

Answer:Shutdown Event Tracking (XP, Not Server 2003)

Heres a couple of articles:

http://support.microsoft.com/kb/555541/en-us
http://www.tweakxp.com/article37489.aspx
http://searchwinit.techtarget.com/tip/0,289483,sid1_gci943320,00.html?Offer=w2k2
 

3 more replies
Relevance 48.79%

Problem 1
I'm not sure if this is a hardware or software problem, but I have a newly built computer and experienced some strange shutdown problems. When I shut down the computer it hangs for a couple of seconds before shutting down. It sounds like the secondary HDD start up, shuts down, starts up and shuts down again before the computer shuts down itself. This always gives me a critical warning in event viewer saying that the PC wasn't shut down properly.

Sometimes it won't shut down at all, and I have to use the power button on the case. The LED code on the motherboard always shows "D4" when computer won't shut down, which means "PCI allocation error - out of resources". HDD also makes power down/up noises. This problem I have had all since I built the computer, but after I did a clean install of Windows with diskpart, it happened that the PC would randomly shut down or enter hibernation mode with LED code "D3", which means "some of the architectural protocols are not available".

However, if I turn off "fast startup" I experience none of these problems. It happens that the PC won't shut down, just much, much more rarely. When that happens LED code shows "D5" which means "no space for legacy option ROM initialization."
What I find strange is that these codes describe problems that doesn't seem to have anything in common, but the LED codes are only from D3 to D5, which are right after eac... Read more

More replies
Relevance 48.79%

Hi Sorry for my english, I prefer German! My Notebook shut down automaticly after a while. The Notebook is running 7x24, but with low usage of the CPU and RAM. It does some jobs, like recording values from a connected sensor. After different running times, the Notebook shuts down. When I turn it on, it asks for Save or Normal Startup. I've read a lot in the Internet but I still got the problem. So these things I've tried: - System Scan with the Lenovo Tool. => No Errors, but BIOS didn't work.- Updated all the recommended things from that Tool- All updates from Windows Update- Manual Bios Update from 1.00 to 1.62- Set the Windows Power Settings from the notebook to High In the event results of W7 I can find under System for example: - Warnung Kernel-Processor-Power ID 37: Die Geschwindigkeit des Prozessors 3 in der Gruppe 0 wird durch die Systemfirmware begrenzt. Seit dem Bericht befindet sich der Prozessor seit 86400 Sekunden in diesem Status mit verringerter Leistung. - Kritisch Kernel Power ID 41: BugCheckCode 0, everthing is with 0 - Fehler Event Log ID 6008: Das System wurde unerwartet heruntergefahren - And many kind of Fehler Kernel-General ID 6. Some Ideas? Thank you


























Eventlog.zip ?781 KB

More replies
Relevance 48.79%

My computer continuously shutdowns every hour or so without any warning. When the computer loads back up a message pops up telling me that I have had an unexpected shutdown. If I click on more information it shows me what the error was (I have the error message copied if you wish to see it) but it makes no sense to me.

I have looked around for a solution but my error message is different to everyone elses.

If anyone could help me with this problem it would be much appreciated, thank you in advance.

Specs:

OS: Windows 7 Ultimate 64-bit
Processor: Intel Core 2 Duo
RAM: 2GB
Graphics card: ATI Radeon X1600 Series
Previous OS: Windows XP Media Center Edition

Lee.

Answer:Unexpected Shutdown - Problem Event Name: BlueScreen

@ttran

Sorry, I will do that now.

Thank you

@Marvel Varghese

I am certain it's not the beta, I bought Windows 7 Ultimate.

9 more replies
Relevance 48.79%

I am running Windows 2000 workstation and need to get an audit report generated that documents when the computer shuts down. It will tell me when it is started (Event Viewer: Security) but not when it shuts down. Windows XP Professional will report both.

Q: How do I get W2K to record and report when it shuts down? Is it a registry setting? A local policy setting?

TIA.

--Bruce

Answer:W2K WS Event Viewer Shutdown audit question

Maybe this will help:

http://www.sans.org/resources/auto_a...#Audit%20Setup

3 more replies