Computer Support Forum

Lap top dies but need to access data from harddrive

Question: Lap top dies but need to access data from harddrive

My Dell Inspirion 1000 went dead. The power supply jack gave way.. so am unable to charge the battery or run the computer though the power supply...So in effect the laptop is dead..

Is there a way I can access data from my harddrive by using my USB drive / other ports?
OR
Is there a way I can charge the battery through the USB ports?

I do have my old laptop IBM A20 (in case you would like to suggest some hook ups) I need the data off my old computer to complete my assignments and cannot wait for a replacement battery to arrive...

Any suggestions appreciated..

Thanks,

Relevance 100%
Preferred Solution: Lap top dies but need to access data from harddrive

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Lap top dies but need to access data from harddrive

Here ya go...

patio.

2 more replies
Relevance 68.47%

hey

i need data off an old pc which was windows 98 word97
so i put it in my comp (xp. office suite 8) i want to access files from old harddrive but wheni click word it says data might be currupt? plz help
 

Answer:old harddrive. need data off it. put as slave. cant access data

iLLegaL89 said:

hey

i need data off an old pc which was windows 98 word97
so i put it in my comp (xp. office suite 8) i want to access files from old harddrive but wheni click word it says data might be currupt? plz helpClick to expand...

Well, generally all the office suits are backward compatible...so there's should not be any problem. Can you open that word file(s) on the old PC (World 97 as u mentioned?) If it is so, you might have some problem with this new PC office suit.
Try, making copy of the old files in old PC using save as or may be you can convert doc files (if you don't have some hi level formating) to rtf files. That can be opened in Wordpad comes with every Windows OS.
This might help, i guess..
- Nirav
 

3 more replies
Relevance 64.78%

Hello folks,
My windows 7 (home premium 32bit) doesnt start anymore, my system recovery data is on external hard drive. Any idea how to access this backup?
Cheers

More replies
Relevance 64.78%

Hi all, I have a dead lenovo y560 with all my data due to graphics module failure. I tried accessing the data using an external esata enclosure, but  cannot  access the drives where I stored my data: maybe due to the rapid drive thing.  Need help on the following: 1. Is there a way to know if the hard disk is corrupted? If  not, how to retrieve the data? 2. How much is the mainboard? I cannot find my receipt so I can't register the base warranty   3. Where do you get the fru part number of the mainboard for ordering? ....Any help will be much appreciated.

Answer:re: Access harddrive data???? How to check if it is corrupted?

I am almost certain its the RapidDrive technology in your way... I had an issue where my OS wasn't booting after installing too many updates and drivers at once. I couldn't get into the OS to split the partitions to reinstall. I tried with the Windows 7 disk, but I couldn't access the partitions, they were still joined. When I tried to reinstall on the joined partition, It gave me an error that it couldn't create a system partition. So I tried my XP disk and voila! It was able to see both my SSD and HD, split. So I was able to format the SSD and reinstall with the windows 7 disk. So if I were you, I would try to access the drive from a computer running XP. Maybe something in XP cripples the RapidDrive technology. Or it could be because the driver is made for Win7, so it doesn't load.  

1 more replies
Relevance 58.63%

I have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...

Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?

Answer:Seagate Harddrive test tool fail but harddrive data seems intact

Run the most thorough and extensive test available with the WD hard drive utilities.

If it fails the thorough test, you may have a warranty claim.

Or the Seagate tool. Whatever you have. Your title is confusing.

3 more replies
Relevance 54.53%

I just recently bought a used computer to replace the one I had which died on me. For some reason, my old harddrive isn't being recognized as the main hard drive when I remove the new one and plug my old one in. Both harddrives are recognized when I have my old one plugged up with the extra power and IDE cable, so I was wondering if it is possible to copy the contents of my old drive to the new one and have it where it transfers all of my installed software over without having to reinstall everything?
 

Answer:Harddrive to harddrive data transfer?

So what you tried to do is get WinXP to boot after it was installed on a different computer. This usually does not work well unless the Motherboard onthe new computer is almost identical to the old one. At the very least you would want to uninstall all drivers that were istalled as part of the old motherboard then do a repair installation of Windows XP. Then again if your installation of Windows is an OEM version of Windows it is not legal to use it on a second computer even if the second computer is a replacement for the first. If this is a retail copy of Windows then you can do it. You would need also the drivers for the new system.. As far as transfering installed programs from one hard drive to another and have them work properly if at all, it is not likely that you will succeed in doing so as installed programs make changes to the registry so that windows will know where to go look for the files to operate these programs. Just transferring the programs will not make the changes needed to your registry that an installation would make.
 

3 more replies
Relevance 54.53%

do to sever problems i was having with my pc i decided to do a fdisk and reformat...... i thought i was doing a smart thing by using my slave drive to backup the things i didnt want to lose .... after backing it all up to the slave drive i erased my harddrive and installed a new operating system... was win98 and now is winxp............ everything is going great now except all them programs and files i backed i can no longer access.... if anyone has a solution to this it would be greatly appreciated...
 

Answer:reformatted primary harddrive now cant access slave harddrive

16 more replies
Relevance 51.66%

Hi -I had a "Fake Alert" infection. I've run different virus & malware prgm's. Cleaned infection. I've checked system files and ran chkdsk - no apparent problems.Still having problems with internet cutting out. Shortly afterwards PC freezes but mouse still works(?) Really slow boot times as well.Please let me know if you need any other info. ie. registry log.Any help would be really appreciated. thx~ See log ~Edit: Moved topic from XP to the more appropriate forum. ~ Animal

Answer:Internet Access dies then XP Pro freezes shortly afterwards

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

20 more replies
Relevance 50.02%

This question has been asked by countless people, and the Internet is filled with a wild array of answers.
 
If you bought an HP system many years ago, and it came with Windows XP, and you have the re-installation disc, if your system dies or needs to be recommissioned because it's unreliable, can't you use the re-installation disc to install the OS onto the new system? I've heard some limitations are involved but I don't know fact from fiction on these:
 
1. You can reinstall only IF you upgrade the system with the same motherboard because the key for the install is tied to the serial number of the motherboard.
 
2. You can reinstall only if you move the hard drive of the old system to the new one (which for me would be impossible because the old drive is IDE and the new one is SATA).
 
3. You can reinstall only if the new computer is a model from the same vendor (e.g., if you have the reinstall disc for a Dell computer it will only work in another Dell computer).
 
4. If you call MS customer support and explain that your system's motherboard has died they will "reactivate" the license for you on the new system.
 
5. You can't do it in any scenario because your EULA will state that you agreed to install the OS on the one computer and agreed it would not be used on another system.
 
Anybody have any definitive answers on this issue?

Answer:T or F: Your OEM license for Windows XP dies when your system dies.

True...simple answer to your topic title.
 
Louis

18 more replies
Relevance 49.2%

Hi folks,
I had a old PC which has just crashed but there is still some of my stuff, like photos, music, documents saved on this drive..which, of course I didn't back up.
If I remove the hard drive and install it in my new machine will it just appear as a second drive?
My new machine is running Windows Media and I don't want to do any damage by installing a hard drive that has XP OS on it

Or am I concerned unnecessarily
 

Answer:Getting data from an old harddrive

8 more replies
Relevance 48.38%

Our mother board died due to lightning, In replacing the motherboard, what kind of problems will I run into in trying to boot up after motherboard is replaced?
 

Answer:Transfering harddrive data

Due to lightning?!! If you're mobo died due to that, I'm pretty sure some other stuff would have died also (like your CPU?)
 

8 more replies
Relevance 48.38%

I need help in tranferring one harddrive to another one. My old one has a blue screen and I want some of my data off of it and someone told me I could do it this way. Any advice whether this is true or not. Please give me instruction on how to get this done...Thanks
 

Answer:Transfering data from one harddrive to another one

what you mean? when you boot up with the current hdd with the data on it, you get a blue error message? well if thats the case, all you have to do is set the drive to a slave or a cable select drive, put it into another computer (thats working) and then transfer the data to the other computer harddrive. once finished you can format and reinstall windows or whatever.

if the problem is worse you may like to have a look at a data recovery software package to get the data. hope it worrks :grinthumb
 

2 more replies
Relevance 48.38%

Computer informationDell Dimension 3000Windows XP HomeProblemUpon booting it attempt to load windows. It will display the Windons XP loco briefly and then go to a blue error screen. The error screen says that the harddrive is corrupted.  Run CHKDSK /F.........I have attempted without success to Start in safe mode, last known configuration  normal and all other options. It will repeat the process and return to the blue screen. MY question is..... They is a lot of data that the owner of compute would like to have recover  from old hard drive. I have heard of this being done. Can anyone give me some advice on how to do this? I do have another IDE hard drive I can use the computer.....

Answer:Harddrive Data recovery

Boot to your XP CD, choose the first repair option, enter the recovery console and run chkdsk /r

5 more replies
Relevance 48.38%

hi guys

first time posting on here, hope iv posted this in the right area, apologies if not! basically my computer has stopped loading up windows, its takes me to the load up options screen (safe mode, last known config, start windows normally screen etc etc) and when i choose an option it just begins the reboot process again and again! iv tried using windows recovery off the XP cd using some methods iv found on various forums but to no avail.

basically iv resigned myself to having to reload windows from scratch but want to know how i go about (trying) to save all the files on my harddrive that im loathed to lose in the process! i have a second computer that i can use as a base but would appreciate some advice, detailed i fpossible, on how i go about getting the said files onto the second computer from the harddrive from my redundant computer

any help would be greatly appreciated

andy
 

Answer:transfering data off my harddrive

16 more replies
Relevance 48.38%

My Gaming PC broke down I am highly guessing is the processor which would always run really hot. Cant Complain since it lasted at least 3 years.

Anyways, right now, all I got left is my laptop. Is there a way I can pull out my old hard drive and get some data and put it on my laptop? I only need one file which is a text file that has my passwords for every site i joined on it.

I am guessing I need to find a way to connect the hard drive externally to my laptop using USB port and get the data i need.

Both my laptop and the harddrive I need to pull has Window Vista home edition installed on it.
 

Answer:Recovering Data From Old HardDrive

You could purchase an external HDD caddy suited to the interface of the hard drive (presumably it would be SATA) and then connect, as you said, via USB to the laptop.
 

3 more replies
Relevance 48.38%

ok...i have an old laptop harddrive that has been formatted, but i need to recover some pictures(years of familiy pictures) from it... i bought the cable that allows me to hook it up to my desktop... i can see the hard drive while booting, but i cant see it once the windows loads up.. what can i do, and what is a good software for that kinda data recovery.

Answer:data recovery from a old harddrive

visit http://www.ontrack.com/ thats the best data recoverey software avalible

1 more replies
Relevance 48.38%

I need some advice i am going to upgrade my current harddrive(Maxtor d-plus 9 8g IDE) to a new Maxtor 6Y120M0 120gb Serial ATA 8mb Cache 7200rpm.1Q - Is there any way i can transfer everything from my old drive to the new drive. I want to use the new drive as my main bootable drive.2Q - If i can whats the best way to go about it.Many ThanksChris

Answer:Moving Data from 1 Harddrive to a new one.

I know several people at work who have used click hereHave a read, and see if it does what you want.

7 more replies
Relevance 48.38%

I asked this a few weeks ago, elsewhere (not sure now where) about transferring data from one computer to a new one.

I was told to take out the OLD hd, unplug the cd-rom of the new computer, plug the old hd into this plug, and save the info from it onto the new hd.

I didn't have the new computer at the time (and it's not mine, it's someone else's I'm helping with it. She doesn't want me taking her new computer apart to do this

The basic question about this (now) is.... I can take her old computer, take the hd out, put it in MY computer, plugging it in instead of the CDROM (which is my E drive) then burn the files from this onto a CD using my CD burner which is my D drive?

Before I take my pc case off I wanted to check and see if I have this right. The CD Rom plug will fit on the HD and it will turn the HD (from old computer) into the E drive- to take the files and folders from?

(It amazes me that I can talk computer

What we were trying to do is zip the folders and send them to her mail, but for some reason the "zip and email" option doesn't come up on her setup.

So, I remembred the plugging in the hd where the CD ROM goes idea.

I have WIN 98SE and the old hd is WIN 98 (if that matters in this)

Also, for whoever did the Halloween decorations, I love the logo!)

Thanks,

Carrie
 

Answer:Taking data off harddrive

The old HDD does use the same connections as the CD drive.

BUT

The CD will probably be connected as a Slave drive, and the old HDD will certainly be a Master if it was the boot drive. Therefore you need to set the jumpers from Master (possibly no jumpers) to Slave on the back of the drive. A key to where they go should be on the drive label. All brands tend to be different as to the settings, there is no standard way.
 

3 more replies
Relevance 48.38%

Having trouble saving some files I copied from my old cp to my hard drive, appreciate some help.

Thanks!!
 

Answer:Saving from data cd to harddrive

Start,Programs, Accessories, Windows Explorer....find the cd drive on left side of box and open right click to copy what is on the cd, then right click paste to where you want it on the right side of ther box
 

1 more replies
Relevance 48.38%

i am using windows 7 operating system and i have an external harddrive that used to be my primary. when attempting to access it through my external hd enclosure it mostly asks me to format it and shows the drive under "my computer" as just a drive with no current/maximum drive capacity and trying to open the drive results in a cyclic redundancy check error. ocassionally when plugging in the drive or changing its drive letter from drive management i get the "scan and fix or continue without scanning" promp and when i choose continue without scanning it allows me to access the drives contents. i have finally freed up enough space on my primary harddrive to backup the drives data but cannot seem to get the scan and fix prompt to show up again :[ is there any way to force it to ask to scan and fix instead of asking to format so i can recover the files? all the information i can seem to find online about it only tells me how to disable the autoplay so it no longer asks ... but i want it to ask so i can remove the data then reformat the drive fully. is there any way you can help?
 

Answer:recovering harddrive data

6 more replies
Relevance 48.38%

I would like to wipe a drive of mine clean, because i'm selling it to someone, what programs can I use to accomplish this task, and there is Windows Vista installed on it.

Answer:how to erase data on Harddrive

Dariks Boot and Nuke (DBAN) download and review - secure hard drive erasure from SnapFiles

8 more replies
Relevance 48.38%

Hi, i'm new to the forums and was looking for some help. I purchased a new computer last week and hooked up my old harddrive to retrieve some of my old data. It was working fine until recently whenever i try to access it, it tells me the harddrive isn't formatted and won't let me view the files. Is there any program or a way i could get some of my old stuff back?
thanks in advance.

Answer:Any Way To Retrieve Data From Old Harddrive?

Do both drives have XP installed? Are the both NTFS or FAT32 file system?

13 more replies
Relevance 48.38%

Everytime I Boot My Computer It Goes Straight To Dos. Does Anybody Know To Stop This? If Not How Can I Pull My Data Off The Harddrive So I Can Reimage It? I Am Using Win Xpsp1.
 

Answer:Pulling Data From Harddrive From Dos With No Os.

Check out http://forums.majorgeeks.com/showthread.php?t=63970There is a link there for a program that may do what you want.

Any MG'ers out there with a better solution?

XP experts should be able to come up with abetter solution for you, I think.
Wait a while and see who replies. Bazza

BTW, welcome to MG. Be warned, it becomes addictive. Baz
 

2 more replies
Relevance 48.38%

I had a problem on my HP Imelda 1437, so I used system recovery to bring the computer back to factory settings.As I had a second drive, which did not want touched , I unplugged it.Run the recovey system,plugged in my second 'data' drive, and the system now tells me that the drive is 'Raw Data' and Unformatted. I assume that the BIOS has been changed, as the system was originally a One hard drive system, is there any easy way to restore the bios, without undoing the covers, removing the battery and /or flipping the Bios clear switch./ Thanks Terry

Answer:Lost Data on Harddrive

System recovery should not do anything to the BIOS, if the BIOS was not seeing the drive you would not see it at all in windows.Has windows allocated a drive letter?

9 more replies
Relevance 48.38%

Hello. I had a computer in which I sometime ago, put a new motherboard and athlon processor in. Just recently, it started acting strange. My control panel would not act right. The Add/Remove Programs would not work, nor would the System icon work. It would suddenly lock up on me. I tried to reinstall Windows XP, but it had a spool error and stopped. Anyway, I bought a new computer with 40 gig hard drive in it and preloaded with Windows XP. (I had Windows XP in the old computer, too.) Is there anyway I can retrieve my data from my old hard drive? I have hundreds of digital photos on it, plus some other data I would hate to lose. I had CD's for all my programs on it. Anybody got any method to retrieve the data?
 

Answer:How do I retrieve data from harddrive?

You can hook up the drive as a slave and get your info if the drive is still good.
 

1 more replies
Relevance 48.38%

we are wanting to get a new hardrive, bigger but we can't find our OS cd so the only OS we have is on old hardrive. We want to transfer everything , expecially OS to new hardrive. First is this possible and if it is how do we do it??? thanks

Answer:Data Tranfer from Old Harddrive to New

What O/S are we talking about?Keep in mind that years of use of a Windows system accumulates a lot of debris, some of which you probably don't want to retain. In the end everyone needs a real Windows CD sooner or later.If you want to preserve this as it is do a google search for free imaging software, or check out Acronis True Image or Ghost if you are willing to pay. (Although if you ar ewilling to pat, you may just want to invest in a Windows CD.)

2 more replies
Relevance 47.97%

My toshiba laptop seems to have died. Turned it on last night and video was black. When i went to internet via quick connect button I could see a faint image of home page.
Is there some way I can get the data off this hard drive to install on new laptop or desktop machine? Usb to another computer of removal of hard drive? I cannot click on any thing on laptop as it is for all purposes invisible.
 

Answer:getting data off harddrive laptop W/no video

First i would try connecting a monitor and see if its the screen or main video bad, [2] With an adapter you can hook up that hard drive to a desktop and recover your data. ed
 

1 more replies
Relevance 47.97%

Hey guys,

It seems my harddrive has formatted itself. I had to reboot my computer and noticed that windows was showing my 200gb seagate as being 128gb. Next i noticed that it said it was raw and not even formatted! I never click on format or deleted any partitions so i dont get why this happened. Im completely baffeled as to why it redetected it as 137gb when it has been working all along. I have not changed any hardware or software settings at all. Im running winxp sp2 and have tried to reformat and it only gives me the 137gb. Please help me with this!!!!
 

Answer:harddrive autoformatted, data lost help!

either your hard drive is breaking down or you have a virus. download avg free edition at grisoft.com or use a diagnostic program from seagate. if you are unable to boot and run the antivirus software just reformat and reinstall windows. tell us what you find.
 

18 more replies
Relevance 47.97%

I have earlier successfully used a SATA\IDE adapter with a 12v=2A/5 V=2A power source (don't know what the two values actually mean here) for saving some data from a harddrive in a broken PC. Can I use the same adapter for saving data from a laptop harddrive? The adapters seem to fit with the extensions I have, but the specs on the harddrive says 5V 700mA. Or will the output of the power source be "too strong" here?
 

Answer:Saving data from laptop harddrive

that should be OK -
you have an adapter - 5V 2A - so the max current is 2amps
and you only need to provide 700mA or 0.7amps
 

3 more replies
Relevance 47.97%

My old laptop suffered a fall and unfortuantly will not work. I have been told that there is no problem with the hard drive just something else and it is terminal, my insurance company has provided me with a new laptop. The problem is it contains all my old files, pictures, music etc.How can I get the files off my old hard drive and put it onto my new laptop. Do I need to take either of the laptops apart?PLEASE HELP!!!!!

Answer:Data Transfer between old and new Laptop harddrive

If your old laptop is totally dead, you will need to get at the old HDD to rescue data. Unless you know what you are doing it might be best left to a professional.

3 more replies
Relevance 47.97%

Hello all! I'll start out by saying I love: Vista, ME, and having rusty nails thrust into my eyeballs.

Here's my deal, one of my sons was playing with the PC and it started booting to "recovery" screen on reboot. The OS wont load up, and it canot start in safemode. If I try to go through the 'recovery mode' steps its an endless reboot cycle ending back up at the 'recovery mode' screen. SO, I decided to end the pain. I removed the laptop HD, put it into an enclosure and connected it to my PC via USB cable. When I browse to the drive a limited set of folders is displayed, thus, I cannot see the files I want to back up.

I'm thinking there are some user controlls or permissions on the folders that wont let me from another computer browse them.

Any thoughts?

Answer:Recovering Data From Vista HardDrive

Maybe try taking ownership:http://www.tipandtrick.net/2008/how-to-tak...lders-in-vista/http://www.howtogeek.com/howto/windows-vis...-menu-in-vista/http://www.mydigitallife.info/2007/05/25/e...ories-in-vista/

1 more replies
Relevance 47.97%

Hope this is in the right forum - apologies if not.

A friend of mine had a problem with their computer - the harddrive couldn't be found by the bios. I think it was a fault on the motherboard, but he decided to get a new computer even if it wasn't.

I tested his harddrive as a slave on my computer and it worked fine. On my computer it shws as G: with 41GB used. I tried copying the contents of the drive over to my computer so i could delete the files not required, but it only copied 27GB. I'm guessing that's system files that can't be copied etc.

Is there a way of getting all the documents and files from G: that the user would have put on - so that the OS system files are ignored as well as any program files, but documents he created can be transferred along with files he downloaded? I have tried to look for a way of doing this but i don't think that searching under 'created by' will be good enough. For example, if he has downloaded mp3 files, these may get missed.

I'm hoping this is quite a common exercise by those more IT than me and an easy explanation is available.

Waiting with everything crossed.
George
 

Answer:Extract user data from harddrive

If the drive was healthy you would be able to transfer both user-data & system files from the drive, since the operating system is not currently running from that drive so no files on it are being used by your system. The only other requirement is one concerning access to the user account data folders - to overcome "access denied" you have to change the access permissions for them.

The hard drive can't truly be declared as "working fine" until you've tested it with diagnostic software such as Seagate SeaTools for Windows: http://www.seagate.com/support/downloads/seatools/ (click "Downloads").
 

1 more replies
Relevance 47.97%

Hey everyone, I'm ner here. This looks like a great place for information. Looks like I'll be stickin around. Anyway, my buddy is in some major trouble. He has a big project due tomorrow and it's all saved at school. He had it at home but his ssiter reinstalled windows xp, and his file is lost.

Is there a way to retrieve his file?

Thank you very much,

J-Kite
 

Answer:Retrieve data off harddrive after reinstall of win xp??

Highly unlikely if she installed from scratch.
If she re-installed over the existing XP, the file should still be there.
Best bet is to get the copy back from school and continue with that.
Then burn it on a CD.
 

1 more replies
Relevance 47.97%

My 14 month old two thousand dollar Gateway laptop just went belly up - I think it's a power problem and that the harddrive is ok, at least I'm praying for that. (I can't believe that I was so stupid about backing up - I nag everyone I know to do it regularly, and then I don't. ) I'll send the machine in for repair but I urgently need some docs from it - is there a way to patch the laptops drive into my desktop? A friend suggests USB to USB and says it'll show up as another drive letter in My Computer. I wonder about a cable ribbon and call it a slave? Am I dreaming?
 

Answer:how to save data onlaptop harddrive

You can buy an adapter to slave it to pc hdd or you can buy a usb enclosure for it for a few dollars.
 

2 more replies
Relevance 47.97%

Hello, i've just formatted my Harddrive and backed up all my important data onto my slave harddrive... i reinstalled windows on my master harddrive now everything on my slave is gone!! it says "harddrive not formatted would you like to format it now" what can i do to get my stuff back??? pleaaaaaaaaaase help me
 

Answer:Important Data on non-Formated Harddrive

16 more replies
Relevance 47.97%

heres the deal
i have a 250gb harddrive thats had alotta stuff taken off and put on it, i want to reformat it.
i have some things id like to save, so i have an old 40gb harddrive sitting around. unfourtunately it has stuff on it and i would like to wipe it clean so i can put it in the computer and have it set to a slave drive so i can just copy and paste all of the data from one harddrive to the other. then i can wipe the 250gb harddrive, reinstall windows, plug in the 40gb, and transfer the data back.

with all that said, how exactly do i do that? i tried putting the 40gb in but either my computer wont boot (no message, the screen never changes from all black) or it boots from the 40gb harddrive and doesnt recognize the 250gb.
 

Answer:harddrive reformatting/backup data

Welcome to TSG!
It's possible that the 250 gig HDD has been jumpered to standalone which is not (edit: not always) the same as Master. You need to set both drives' jumpers. The 40 GB to slave, and 250 GB to Master.

If the 250 GB HDD is SATA, then it should be recognized no matter what IDE drives are present... In this case I would go into BIOS and check if they are recognized OK, and then check boot order. Besides boot order of different device types (floppy, CD, HDD, etc.) in some BIOS-es there's an option for setting boot priority of HDDs present in the system.
 

1 more replies
Relevance 47.97%

A little while ago my old computer finally died, my cat spilled water onto the pc and it managed to get into the motherboard and it stopped working afterwards. Anyway, I removed harddrive which had windows 7 running on it. as it was the only thing worth saving from all the hardware. I inserted it into a rig I was given by my brother that's running windows 10. After I installled the harddrive into the pc I decided i'd just use the harddrive with windows 10 as my primary harddrive, after attempting to access the files on the old harddrive I came into a problem, after I gave myself permission to access the drive I noticed the 'last date modifed' was from 6 15 2015, which was the last time I reinstalled windows 7. After looking through every windows old, program files ect I realized I couldn't find any of my saved files from the latest installation of windows 7.After looking at the amount of space left I realized it was exacty the same as when it was on my old computer. So I used a file recovery software on the harddrive in hopes of finding my most recent pictures and videos. Instead I found files that I had deleted that were from old harddrives previous installation of windows 7. So I booted up the older harddrive as the primary drive and loaded into windows 7 with the same wall paper desk top icons ect that were on the previous installation that I made in 2015. So, is there anyway to recover the files that apparently have disapppeared?
 

More replies
Relevance 47.97%

I have a Maxtor 60g drive that appears to have failed, not physically though. I am using a W95 machine for testing (could be my first mistake) with EZ drive installed in the bios which should allow it to see drives larger than 2 gig. I first used a W98 FDISK bootdisk and FDISK/mbr command to fix the boot record that I believe was corrupted and then ran the EZ Drive boot disk utility to test the drive. It says all is okay! Now when I install the drive as a slave drive my bios sees only 8gigs instead of the full amount. I tried to manually input the drive data into the bios but the figures don't generate the correct size of the drive. Could this be because of the W95 system? Also, assuming that the data on the drive is still intact, what utility could I purchase to retrieve it without the convience of a boot record for reference? :bounce:
 

Answer:How do I retrieve data from crashed harddrive?

I would add a pci ide card and retrieve the data that way, unless I could slave the drive in another sys and burn a cd or dvd.
 

5 more replies
Relevance 47.97%

As I'd like to free up space, how does one transfer data (still or moving pictures) from hard drive to CD rewriter; answers in some detail please, as I am a computer novice.

Answer:transfer data from harddrive to CDrewriter?

Do you have any burning software? Nero etc? If not, get a program like DeepBurner from click here Free of charge.DeepBurner is an advanced and extremely powerful CD and DVD burning package. It removes the hassle of making CDs, DVDs, and autoruns. It even makes it easy for you to create and print your own labels and booklets. DeepBurner supports a very wide range of internal and external (USB 2.0 and FireWire) CD and DVD writers. Burn any data, copy any disc, make backups, create astonishing photo CD albums, make ISO CDs and Video DVDs with this very easy to handle software!It comes with a comprehensive guide.

10 more replies
Relevance 47.97%

I have a Dell 1525 Inspiron Laptop and  one morning it just wouldn't start up to Windows at all.  The tech couldn't do it no matter what, no restore, nothing so he said he'd have to wipe everything clean.  But, I can't lose some important text files.   I bought an external harddrive but since I can't get  into Windows I can't load the installation CD or really do anything.  How can I get my laptop info into an external harddrive without getting into windows?  Is there any other way to reload without losing files?Thanks

Answer:Need to Save Data to an External Harddrive

Yes. And the Tech should have told you. The method is to gently remove the HDD from the sick computer and place it into a good computer, as an extra drive. You save the relevant data into a folder on the main drive of the host computer. Later you can move that data back once the sick computer is well again. Programs have to be installed again. The data only needs to be copied.Hard Drive Recovery Tutorial - How To Slave Laptop DiskThe link above shows doing it with an eternal USB device, so you would not even have to get inside the Desktop Chassis.

1 more replies
Relevance 47.97%

hi,

i want to recover data from the following harddrive (of a dead laptop).
FUJITSU 30GB IDE ATA PATA 2.5" LAPTOP HARD DRIVE HDD on eBay, also Hard Drives, Drives HDD CD DVD, Laptop Accessories, Computing (end time 21-Jan-09 18:46:06 GMT)

I also have this new laptop
Product Specifications*

with this SATA drive
WD Scorpio Blue 250 GB SATA Hard Drives ( WD2500BEVS )

I also have a freecom external drive which is also sata.
Freecom Mobile Hard Drive Classic 250GB: Amazon.co.uk: Electronics & Photo


And i have a fujitsu siemens desktop pc - pentium 4, 512mb, 74gb

So, what product (ide2sata, ide2usb, enclosures, etc) can i use to recover the data?

thx 4 ur help.

Answer:Data recovery from harddrive - urgent

Well if you have a desktop which you can plug the dead 30GB in to, then read it from there, you could just copy the files from it. I don't know how difficult that would be to do with only a laptop.

2 more replies
Relevance 47.97%

Hello. Still trying to get used to Vista after have xp for some time. I am stumped on saving a data file that I copied to a cd from my old cp. How do I save it to my hard drive.

Thanks
 

Answer:? on saving cd data to harddrive thru vista

View the file on the CD in the documents viewer (explorer) and right click it and select Copy.

Then navigate to the folder where you want to put it and right click and paste ...

Its no different to any other Windows version in that respect?
 

2 more replies
Relevance 47.97%

I have reformatted the hard drive, installed the necessary programs, but cannot eliminate the data.In fact,  I CANNOT FIND IT."My computer" shows the hard drive ()x200) as having 22.6 gb available out of 320 gb. But whan i open up folders to find what is there, nothing appears except "Folder is Empty".Of course, the computer is slow as molasses and I need to clean it out.I have backed up the datea to aSATA drive so I no longer need it.Anyonw have any ideas? ThankisRAM

Answer:Cannot find data to erase from harddrive

Let me guess, you use window to format the driver? You may want to take a look at clicking on the window icon, right click on computer>-manage->Disk management and see if there are any partitions that are unformatted. Alternatively, you may want to download a free and great tools called partition wizard. zap the whole harddisk and see if the empty spaces comes back.

1 more replies
Relevance 47.97%

I've got a 250 gig WD scorpio drive that was damaged during a botched backup with Norton Ghost. The controller is reporting a meager 54.49 gigs of available space on the unallocated disk. I assume this is due to LBA definitions (excuse me if I use the wrong vernacular, I'm just learning about this now) that have been changed to match that of the drive that was being backed up. I know the Linux fdisk command can perform the necessary operations, but I'd prefer to stay in a Windows environment. Does anyone know of a command or a program that can perform the necessary changes?

Thanks
 

Answer:Editing harddrive CHS data in Windows 7

Instead of fiddling with it, I'd use the WD diagnostic tools.
 

5 more replies
Relevance 47.97%

A friend at work wants me to try to recover some data from a laptop with a broken screen and windows isn't booting.
What i want to know is whats the easiest way to do this.
i think i read some were that you can use a linux cd to recover stuff from a pc i do have a 1 therabite external drive will that be good to use if so what linux OS should i use?
I don't know the model of the laptop ill be picking it up tomorrow and post the specs of it.

thank you for your time.

Answer:Data recovery from laptop harddrive.

Take the hard drive out of the laptop. Get an external enclosure that accepts 2.5". Put it into your system and transfer away.

5 more replies
Relevance 47.97%

Hey all ... I need to recover data from a crashed HD. What can I try to get it off. I noticed that it wasn't mounting if I would leave windows and log back in later. I was [planning on moving the data but of course now XP doesn't see it at all ... ran a CHKDSK on it during boot up and then it showed. But when I went to access the data it wouldn't let me. Rebooted and now it doesn't show up.

Suggestons and guidance needed!
 

Answer:Recover Data From Crashed HardDrive

10 more replies
Relevance 47.97%

The external hard drive that I have now is starting to malfunction. Is it possible to move the data on it to another external hard drive and do you need a computer to do it? The older hard drive has a capacity of 120 gb.
 

Answer:Moving Data from one external Harddrive to Another

Since it is external, yes you need to connect it to a computer [which in any case would be the easiest method]
If they were both internal drives, you could use a disk duplicator like this;
http://www.newegg.com/Product/Produ...=hard_drive_duplicator-_-17-707-370-_-Product
 

1 more replies
Relevance 47.97%

Circuit City tech guy says he could NOT transfer my
data from IDE 60 GB to my new HP computer I bought on 7/8/7
He said the harddrive wasn't spinning & he thought it was dead.
(My monitor fizzled out on 7/7/7 like a light bulb going out.)
HOW DO I RETREIVE MY IMPORTANT DATA??????
 

Answer:Harddrive DEAD; LOST DATA

If the hard drive is not spinning, your options are suddenly very expensive.

You will need to take the drive to a professional data recovery company, but prepare yourself for a likely very high cost. If the drive has to be opened, a "clean room" lab is essential as even a single speck of dust will take out the heads and platter.

Data that only exists on a hard drive and is not backed up is data that you don't care about losing. The hard drive and PSU are the two most failure prone devices in a PC. You need to backup important data regularly, the hard drive is temporary storage at best.
 

2 more replies
Relevance 47.97%

Hi guys,
well heres the story: My sister brought me a computer to fix for her friend who owns a restaurant. So all i did was an easy fix formatted the hard drive and installed windows. Well i brought it back to the owner and she is very sad that i have deleted all the files on the computer. If i knew she wanted to recover the data i would have installed the hard drive into my computer and backed it up for her but i didn't know.
Heres the problem: She had a lot of records stored on the computer she needs and I was wondering if there was a way to restore some of her data that i formatted? I am willing to buy the software because i am getting more ppl who ask me to fix their computer. I know that since i installed windows on it, that it is impossible to recover all the formatted data but I think if i just get some she will be happy. I thank you for any help. Thank you.
 

Answer:Recover Data from Formatted HardDrive?

Runtime software's get data back seems to work the best for me,
 

5 more replies
Relevance 47.97%

Circuit City tech guy says he could NOT transfer my
data from IDE 60 GB to my new HP computer I bought on 7/8/7
He said the harddrive wasn't spinning & he thought it was dead.
(My monitor fizzled out on 7/7/7 like a light bulb going out.)
HOW DO I RETREIVE MY IMPORTANT DATA??????
 

Answer:Harddrive DEAD; LOST DATA?

This is the same as your previous post - http://forums.techguy.org/business-applications/593431-how-transfer-harddrive-new-computer.html - which Ziggy suggested you get moved to the Hardware section. Please don't double-post, just contact a mod and have them merge the threads and move them to Hardware.
 

2 more replies
Relevance 47.97%

hi friends i have accidently formatted my d drive where there were my collection of software and pictures , so can they be rrecovered ? if yes which is the best application or software in free and paid...please suggest

Answer:which is the best data recovery software for harddrive

Try this
[email protected] File Recovery. Product Features: NTFS, exFAT,FAT32,HFS+,Ext2fs/Ext3fs
I used it once on a formatted drive and recovered 90%+ of the files on it.

There is a trial and this is what they say about it





Quick Recovery Steps


Download and install [email protected] File Recovery on your computer.
(Avoid installing it to the disk where your lost files are located)Scan the diskSearch for deleted filesFree version allows recovery of up to a 64kb filesVerify the file integrity using file PreviewWhen your data is found, the free version can be easily activated to allow recovery of any size file without re-installing the software and re-scanning the disks



Its on sale at the moment.

Good luck.

23 more replies
Relevance 47.97%

Hi, Can anyone recommend the best data recovery company. I had dropped my external hard drive and opened it to recover, but failed. It is serious, difficult job. There are so many data recovery company in UK, but i do not know which one can do such difficult job.
Many thanks

Answer:data recover from broken harddrive

If you have opened it game over!
and spam springs to mind.

4 more replies
Relevance 47.97%

Hi. A while back I encountered some problems with my computer. It started with me waking up to a black screen with white text telling me to repair windows. I restarted and there were no more worries. This happened again and again and my computer became harder and harder use. The computer would have complete lag spikes when playing games, entering files etc. became slower and slower until I couldn't boot windows at all. I bought a new SSD drive and installed windows 7 only to find a 5 minute boot time. When it finally booted, the old hard drive (which is connected a long with three other drives) was extremely difficult to handle. Accessing files was slow and the whole computer seemed slow despite having an SSD disk and fresh windows install. I moved my old hard drive to my mom's computer to see if I could extract my files (my whole life is in it), but the transfer speeds are slow and I'm getting error messages when copying certain files. I'm not sure what to do here. I know there are certain file recovery software's I can use and I tried Recuva (which is free), but when pointing it to my hard drive, it stalls for about 2-3 mins before giving me an error message. I find it odd that I can access and copy files from this hard drive through 'Computer', but that a file recovery software has troubles with it :S I need some help here

Answer:Harddrive issue, is my data lost?

In the circumstances, I would recommend that you use PhotoRec to recover all your files first. I do not want you to try anything else - not even the manufacturer's diagnostic utility.(That can come after data recovery)

PhotoRec:

1. It does not write anything to your drive in question.

2. PhotoRec ignores the file system and goes after the underlying data. It can recover almost all types of files, not necessarily photos and videos.

( IMO, a badly corrupted file system caused Windows not to boot but in its present abode, you are able to access it and copy it too but with errors because of the corrupt file system. There is still a 10% chance that that HDD is dying with more and more bad sectors being created. In either case the first priority is to recover as much as possible, and to me there is no better way than using PhotoRec)

I would also recommend that you run it under DOS bootable from a pen drive. Create your bootable DOS pen drive with Rufus Rufus - Create bootable USB drives the easy way ( I go with MS-DOS rather than FreeDos - fad )

Download TestDisk & PhotoRec 6.13 (15 November 2011), Data Recovery Dos/Win9x version from TestDisk Download - CGSecurity Extract the zip file to your C drive. You will find a folder testdisk-6.13 on your C drive. Open it, select all the files in it and copy all those files into the Dos pen drive you already created. Boot from the DOS pen drive and at the command prompt type photorec_win.exe and press enter to run it. (And y... Read more

5 more replies
Relevance 47.56%

I used Secure Data Disposal to wipe the contents of T30-2366 40 GB harddrive at level 3 (DOD), which was successful. Now however, when I boot up the T30, the screen says "error loading operating system, press key to restart". If I load Parttion Magic Resure diskettes - it recognises the hard drive, but says there is an "partition tabel error #108 found" but is unable to reformat it or do anything else. If I try and reinstall Windows XP from CD - it says " error loading operating system, press key to reboot". Could you please advise how to reinstall Windows XP.    

Answer:Harddrive problem after using Secure Data Disposal v1.3

Hello, please check here the XP clean installation guide.Try a low level format before.

2 more replies
Relevance 47.56%

problem:

got a pc which wont work, it keeps asking fr the boot disk. this doesnt matter - its an old heap of junk which doesnt need fixing. i dont even know which OS it was using at present. (i will find out tomorrow)

I need to get the data off the the harddrive which it used.

the drive is only 10gb, its a fujitsu MP3102AT drive.

i tried ubcd4win but the pc kept asking for floppy, i set the boot options in the bios to cd, but it still wont load.

EDIT: got it to load the cd drive - ubcd loaded, but isnt recognising the hard drive.

This hard drive just wont be picked up or recognised in any machine i have, is it just fuked completley?
this all adds to experience!
 

Answer:Solved: trying to recover data from harddrive - unsucessfully...

9 more replies
Relevance 47.56%

I have just purchased a new computer (2.8Ghz Pentium 4, 1 GB RAM, 128MB Video Card and an 80GB hardrive). I am running Windows XP home edition. I also have my old computer and I want to take the hardrive out of it and put it in the new computer as a slave. I then want to take data off the old harddrive and tranfer it to the new 80GB harddrive. I am running Windows 98SE on my old harddrive.

MY question is: Do I need to disable Windows 98SE on my old disk? Will the new computer recognize the second hard drive? How do I shut off Windows 98SE, to keep it from booting up when the new computer starts running?

Thanks for all your effort to my problem in advance.

Sparkknock
 

Answer:Solved: Adding a data filled 2nd harddrive

I'm not an expert at this but, you don't have to do anything with the 98 drive because it will be set to slave, will not boot the os. You should be able to read data from 98 drive as if it was a floppy, not sure about the fat32, ntfs thing. Keep in mind you be be able to copy data only not programs, i.e. you will have to reinstall any programs you had on the 98 hdd onto the new hdd.
 

3 more replies
Relevance 47.56%

I need to recover some data from an Hitachi Travelstar laptop harddrive that crashed. It's a model HTS548040M9AT00, with P/N #08K0856. I bought an R-Driver brand "USB 2.0 to IDE Cable" adapter to do this (see attachement). I removed the drive from the laptop and connected the adapter to it and the electrical power. I can hear the disk spinning. However, the computer doesn't indicate it has recognized the harddrive; i.e nothing happens. When I go to the file manager (Windows XP), it doesn't show it's connected. Any ideas on how to get this going? Thanks in advance for any help.

Answer:Hitachi Laptop Harddrive Data Recovery

at first get in the bios of the pc and see if the hard disk is recognized. if is ok, then see if is recognized by windows. if not, check if windows show the drive in the device manager. r-click (on my computer) ->properties -> hardware-> device manager. (under disk drives). if this is ok, the problem is that the drive doesn't have a partition. this is the reason why you don't see it in my computer. if is not recognised even in bios or device manager, then you have a serious problem with the drive... electronic problem, or something burned...
reply again for any news.. good work!

1 more replies
Relevance 47.56%

Hi guys,

i've been recovering data for a while now from shot drives.. but i've never tried recovering data from a drive that CAN NOT be detected in bios.. the software that i use is then worthless coz the drive doesnt appear..


any suggetstions?

the state of the drive is:

- it made a clanking noise before dying...
- if the harddrive is connected in one IDE line, the other drive in the same IDE channel can not be detected as well.. tried interchanging.. slave and master,
- the hard drive seems to be spinning still.. coz it vibrates when i introduce power to it..


i hope i can still recover data from this drive.. very very valuable data..

please help.

Answer:Recovering data from harddrive (BIOS cant detect)

www.ontrack.com

9 more replies
Relevance 47.56%

My toshiba harddrive died after a few months of receiving it. I got it for Christmas last year. The original harddrive died in June and was replaced with a new one within two weeks. In September the new harddrive crashed and died. I took it to a local shop to get the data, but they were unable to get the data.

I really need this data back. It has a lot of important files. What can I do to get the data?

Answer:My Toshbia Harddrive died. How can I get the data back?

That's really bad luck!
Assuming the drive is still in the computer and will spin up you could try booting to a live linux CD. A good free one would be puppy linux.
Get a friend to download it and burn to a CD. Boot your laptop from the CD and see if you can browse to the "dead" HDD and pull files off to an external USB HDD.
There are businesses that recover data but I think it is an expensive service.

9 more replies
Relevance 47.56%

We have an old sony viao computer running Windows XP (Home ed). It runs safemode's bootstrap for a moment before It gives me a BSOD of UNMOUNTABLE_BOOT_VOLUME, with STOP: 0x000000ED(0x873493A0, 0x000009C, 0x00000000, 0x00000000). The disk also makes a lot of clicking noises whenever it moves, so I'm pretty sure it's failing.

Is there any tools to transfer data from the damaged, unbootable harddrive to an external harddrive?
 

Answer:Harddrive failing, unbootable. want to transfer data

deletesystem32 what you could do is connect this drive as a secondary drive to a desktop and see if it will be detected, from Windows or a live bootable disc. You can also try to connect the drive to a IDE/SATA to USB 2.0 Cable Adapter you can purchase from tigerdirect or newegg, to see if it be detected so you can try and grab the data off. A lot of the times when a drive is inaccessible there isn't a whole lot that you personally won't be able to do with it.
A mechanical failure means that your drive has broken parts that are preventing it from working?busted drives often make a telltale clicking sound as they futilely attempt to access their files. If you hear that, your data may still be there, but you're not getting it back without calling in the experts
 

1 more replies
Relevance 47.56%

Hi,

I recently broke my laptop and as it was fairly old decided to upgrade instead of trying to fix it, however I want to get the data from my old laptop to upload onot my new one.

I have a external enclosure for a laptop harddrive that I can slave off but my issue is that the drive from my old laptop is partitioned (C:\ & D:\). My new laptop's system drive is C:\ so when I plug in the harddrive it detects but does not come up as a drive. I've tried to change the drive letter of the C:\ drive but as it's the system drive it won't let me, anyone know what I can do?

Any suggestions would be most welcome, I have 3 years worth of emails on my old harddrive which I really don't want to lose.

Thanks,

Dillonmr

Answer:Broken laptop - recover harddrive data

Not sure why the partitions aren't showing up, but I can tell you there is absolutely no point in changing the drive letter as it wouldn't help you access the external drive and could really screw up your current system. What operating sytem were you running on the old drive? If the partitions are formatted as NTFS, they could be refusing to mount due to an "unclean shutdown".

8 more replies
Relevance 47.15%

Hello,

I have two problems:

1.
I have a lot of scanning data, all date and time stamped. All the scans show different status of shipped packages (all shipments have unique ID#, but there are multiple scans on route for all of them to track the packages). I want to find all the packages, for which there was "misdirected" scan, then for all of them, show the scan before. So, the end result would be all the scans that show for each package where it was misdirected (the terminal# of the scan before the misdirect scan).

2.
I want to automate this: run 5 queries every two hours between 8am and 10pm, copy and paste all results into Excel to specified areas (e.g. first query results to A1, second to A5000, third to A10000, etc. or onto different tabs), save as .csv to a specific folder, then send it as attachment to a given e-mail address. Even partial solution can be good.
I only know macros (somewhat), not as much VBA, so I tried that with the TransferSpreadsheet command, but can't get it work.

Any help is greatly appreciated.
 

Answer:Solved: ACCESS: Show second latest data and export data to excel from macro

14 more replies
Relevance 47.15%

I am an absolute begineer in MS Access. Will try to put my question as simply n clearly as possible.

I have designed a database to keep history of our company's projects. The 'Master Project History Table' contains fields including 'Project Ref', 'Project Title', 'Project Budget' and 'Project Year'. The users are expected to populate the table through 'Master Project HistoryForm'.

The key field is set as 'Project Ref'.

Some of the projects are combined with each other and to display this info, 'Master Project History Form' also has the fields 'Project Ref-1', 'Project Title-1', 'Project Budget-1' and 'Project Year-1'.

I am loking for a code for the ('On Update' event) that will fetch and display data in 'Project Title-1', 'Project Budget-1' and 'Project Year-1' fields when 'Project Ref-1' is updated. Please note that all this info is coming from the same 'Master Project History Table'.

My IT guys told me to use a code with variable for each field that goes something like this (to update Project Title-1 field):

Dim varX As Variant

varX = DLookup("[Project Title]" , "Master Project History Table" , "[Project Ref]=" & Forms![Master Project History Form]![Project Ref-1])

Me![Project Title-1] = varX

And then repeat for each other field by defining new vari... Read more

Answer:MS Access: Updating Data In One Field Should Update Data In All Relevant Fields

14 more replies
Relevance 47.15%

Hello - I am currently building an "Agent Journal" Database. This will be an area where supervisors can enter "Journal Entries" for their direct reports. The way it is currently setup is: The Supervisor form pops up. Supervisor selects their name from a dropdown, and select a command button. This opens another form with another dropdown that lists only the selected supervisors direct reports. Once the "direct report" name is selected, they will hit another command button that opens the "Journal Entry Form" On this form, there are text boxes for Supervisor and Agent. These fields are auto-populated based on the names selected on the previous 2 forms. There is also a combo box where they can select a "reason" from a dropdown menu, and a date picker so they can enter the date. The problem that i am having is: The data entered into the final form will not save to a table. I want to maintain the auto-populating of the Supervisor and Agent names when this form opens, and i want to have them select a command button to save all of the data on this form to a table. Can anyone help me with this????
 

More replies
Relevance 47.15%

Hi, I have a failed SATA 80G internal toshiba hard drive. I am trying to recover data on to a different computer by using a connector that connects to the USB drive. When I connect the usb to the computer the hard disk is recognized for a few seconds and before trying to take any actions it goes away. It also looks like the hard disk is running(giving some revolving noise).
Any help is appreciated.
thanks
:cry
 

Answer:Data recovery from a failed Internal Harddrive of a laptop

Hey Oldorchard.
So, just to understand this, you have a Sata 80GB internal HD, and are using a Sata to USB connector to transfer the files?

Do you have all the proper drivers for the USB connector?

Also, is there any knocking noises, or just a nice hum?

Thanks
 

3 more replies
Relevance 47.15%

I would like to download a free defrag program that will put all the data on the outer edge of the hard disk platter. Does anyone know of any?Thanks!

Answer:I need a Defragger that will put all data to the outer edge of harddrive platter

Why must the data be on the outer edge of the platter?

14 more replies
Relevance 47.15%

I was given very helpful customer service by the dynex representative. I fixed the problem of the harddrive randomly disconnecting.

There are numerous errors relating to permissions as well as the files just not showing. When I first bought to enclosure everything worked perfectly fine.

Then the files stop loading and cut off randomly. They did not load on other computers either. I bought a duplicate and similar enclosure.

The errors arrise from editing the permissions. Before take ownership worked and not it says that the file can not be found yet the harddrive says the data is there.

Answer:External Harddrive not accessing data. Numerous errors.

Basically I am unable to set a new owner.
The drive says my files are there hundreds of GB were taken up. Yet when I highlight all the folders it says only 2gb is there. I do not have permissions for some of the folders and when I try to change ownerships or permissions it says file not found.
I tried using admin command prompt to get the files listed and takeown could not find G: yet I can enter the drive itself.
Everything worked perfectly a while ago and I just did not really need to access the drive at the time.

Some folders I can enter but no files are present. I think only a couple of folders have actual files.

5 more replies
Relevance 47.15%

Hi, Is there any reviews available about 128SSD disks that will come with some models on T410?I really want to know detailed specs about speed and if it supports Windows 7 TRIM? Thanks! Outouser

Answer:ThinkPad T410 with 128SSD harddrive performance data?

Any news about this?  

9 more replies
Relevance 46.74%

Basically I have a situation where users are creating data tables in Microsoft Word using the creating table functionality, and are then resquesting that the data will be imported into a single Microsoft Database field.

Please could someone show me the best way of doing this!!!!!!

Cheers !!!
 

Answer:Importing Table Data Into Multiple Access Field Data?

Do you mean they're creating, say, a 3-row by 3-column table and then they want to import everything in that one table into a single field? a single record?

Out of curiosity, what happens if you copy and paste, perhaps with an intermediate step through Excel?

Also, is there a reason why your users cannot work directly in Access?

More details, please.
 

3 more replies
Relevance 46.33%

Does it do the 'photocopy' type thing like Norton Ghost or does it create an image file that can co-exist with other data on the destination hard drive?
 

More replies
Relevance 46.33%

Hi Everyone,

Today was a bad day for me as i lost every single file in my Hp laptop. I think it is all my mistake. let me explain what happend.

My laptop have 500GB HD. Laptop came up with 456GB of "C" Drive partition. Other 3 paritions were HP_Tools, Recovery and System.

"C" drive was half full when i decided to divide it into more drives to save important data from "C" to another drive. After searching on internet i came to know that windows 7 has a limit of 4 parititons. then i started searching for a quick solution to avoid full new windows installation. I installed a Mini Tool Parition manager and Set the "C" drive as Logical and shrinked more drives from C. Computer restarted Partition manager takes 10 minutes to do everything and then WIndows started and all was ok. But I wanted to have one more 100 gb partition from "C". I did it again using Parition manager and computer started all stuff was going well. Parition manager finshed everything and when computer restart nothing works. Every time computer restart from windows 7 Logo. I was sure that something goes wrong. i tried to repair it but repair takes 30 minutes and solved nothing for me. i canceled repair and try to install fresh windows 7. when i was selecting the "C" disk to install windows in it. An error appeas saying "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installatio... Read more

Answer:Full HardDrive Cleaned Important data lost - Hp Laptop

If you ran clean ALL, you are SOL.

Perhaps you can ask the NSA for their backup copy.

Too late this time, but in future, good idea to make an image backup every so often.

This is great free program which you can use to prevent getting in trouble in future:
http://www.backup-utility.com/free-backup-software.html

7 more replies
Relevance 46.33%

I was trying to transfer the data from an IDE harddrive to an SATA harddrive using norton ghost 2003. Well everthing was going fine, I had the SATA drive formatted into NTFS and started ghost. When the ghost dos screen came up, the computer froze and wouldn't let me back onto the origginal harddrive. I ended up haveing to format the original IDE drive just to get an operating system back on it. Needless to say the person who's drive i was transfering was not pleased.

Answer:Can you transfer data from an SATA harddrive from an IDE HD using norton ghost 2003?

Any clue as to what caused the error?

1 more replies
Relevance 45.92%

I have a LaCie 500gb external harddrive that I use to back up my laptop and store large files. It has its own power supply and connects to my computer by USB. The other day I plugged it into the power supply and noticed it wouldnt turn on and there was an electrical burning smell coming from the plug on the harddrive. Is it possible that it is just the plug damaged and my data is still ok? Can I remove the data from the harddrive somehow? Would it be worth trying to get someone to repair it or should I just buy a new one?

I don't know alot about this sort of thing and any help is greatly appreciated!
Thanks
 

Answer:External harddrive not working, burning smell, can I retrive my data or repair it?

Yes Ur Harddisk Is Damaged Nothing will be retrive from It
 

4 more replies
Relevance 45.92%

Hey Guys! Is it safe to build a T410 harddrive into a T400 machine in order to save the data that on it? I've heard that there's no risk to the T400 machine and one can use the harddrive, BUT the T400 machine can have different BIOS settings which the harddrive will then adopt, which will make the existing data of the harddrive unreadable. Can somebody confirm or refute this and if there is indeed a risk, how big is it? I'd be super grateful if somebody could help me out here! Thanks in advance!

Answer:Insert T410 Harddrive into T400 machine in order to save Data

Wasever wrote:
Hey Guys!
the T400 machine can have different BIOS settings which the harddrive will then adopt, which will make the existing data of the harddrive unreadable. 

No, I don't think so. 
 
BUT, if you are using Windows you may get a blue screen, that shouldn't make the data per se unreadable, but if the Thinkpad doesn't boot  there's no much data you can copy.
 
Wasever wrote:
 
Is it safe to build a T410 harddrive into a T400 machine in order to save the data that on it?
 

Can you tell us what data you'd like to copy? Is the T410 damaged? Or the installation corrupted? Could you elaborate more on the problem? We may help better with more information
 
Welcome to the forum btw!!
 
 
 

1 more replies
Relevance 45.51%

Is this possible? I have a simple Access database. One of the data fields is the name. It is entered as Last, First in the box. Is there a way to split this data to make it easier to search the database? Here's a pic of the database.
And manually creating a new field will be impractical as there are 25,000+ records in this dataabse. Unless this can be split somehow and the new field created then.

More replies
Relevance 45.51%

I have tried creating a data access page several different ways, but am unable to add, edit, or delete my data. I can view it. I've even started from a new database with one table, but am still unable to edit or add data. I've checked the properties of which appear to be fine. Has anyone else had this trouble? I'm using Access 2003.
 

More replies
Relevance 45.51%

Hi everyone! New here and this is quite a nice site. My problem stems from my impatience. Have a HP Pavillion a6700f with Vista Home Premium x64 bit. The harddrive crashed which was totally unexpected. No warning whatsoever. I have talked to HP support, which was the most pleasant experience, ahem. They said I have tried all I could do and agreed to send me a new harddrive at no cost along with recovery discs (which I already have). Because I simply do not wish to wait until Thursday to get the drive, I was wondering what would happen if I took my external HD with two partitions and installed it internally, would Vista destroy both partitions during installation and create one new partition? The reason I ask is I have many family movies and pictures on one of them and do not want to lose them, of course. The other partition is about 220gb and has nothing installed. Bottom line, will Vista format the entire drive and remove the partitons resulting in data loss? Or should I just wait until Thursday?

Thanks,
Rodney

Answer:Harddrive crashed unexpectedly. Will reinstalling Vista destroy partitions and thus cause data loss?

Personally, I would wait until you get the replacement drive. If you are worried about data loss, don't take the chance of have something unexpected happen.
Another thing, whenever I had a warranty replacement from HP/Dell etc, it normally comes with 24-48 business hours of calling it in. They may be giving you the worst case scenario, unless you are in the middle of nowhere.

2 more replies
Relevance 45.51%

I'm running an Acer desktop with Windows 8.1.  I put a second hard drive in and the computer recognizes the drive. If I unplug the first hard drive the second hard drive will come on and work fine. I went into the bios and enabled the boot menu. Then with both drive hooked up I can't access the second drive by hitting F12. The first drive always comes up. How can I access that second hard drive?  

Answer:Access to second Harddrive

What's the OS on the second HDD?

9 more replies
Relevance 45.51%

I'm running an Acer desktop with Windows 8.1.  I put a second hard drive in and the computer recognizes the drive. If I unplug the first hard drive the second hard drive will come on and work fine. I went into the bios and enabled the boot menu. Then with both drive hooked up I can't access the second drive by hitting F12. The first drive always comes up. How can I access that second hard drive?  

Answer:Access to second Harddrive

What's the OS on the second HDD?

9 more replies
Relevance 45.51%

I have just gotten a Toshiba Satellite laptop, model# A35-S159 and I can not find out from the manuals how to access the hard drive, I have even called the Toshiba support line and they could not explain to me how the remove and replace the hard drive. ( they could hardly speak English) All they could tell me is that the hard drive is inside the case. as if I did not know this. The specs does not show this model in particular but does show pics on removing a cover etc. However this model does not have such a cover plate on the underside of the unit. Pleas give me any info you can , thank you
 

Answer:Access to harddrive

Here's a site on Toshiba Laptop Disassembly, perhaps it'll help: http://www.irisvista.com/tech/
 

1 more replies
Relevance 45.51%

When i start the computer, sometimes i cant see my harddrives in "My computer" then i restart computer and check again they'r there but it says "Local drive (E and Local drive (D but used to be named something else.. when im going to enter it says "E:\ is not available. File or catalouge is damaged and cannot be read." or something like that im not english so it wasnt exactly what it said but something like that..If it is to any help the local drive D and E are same hard drive but just split up in two, anyone know what i could do?

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:19:22, on 2008-12-07
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program\Alwil Software\Avast4\aswUpdSv.exe
C:\Program\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\Program\ALWILS~1\Avast4\ashDisp.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program\Alwil Software\Avast4\ashMaiSv.exe
C:\Program\Alwil Software\Avast4\ashWebSv.exe
C:\Program\Trend Micro\HijackThis\HijackThis.exe
R0 - HKLM\Software\Microsoft\Internet E... Read more

More replies
Relevance 45.51%

I have 2 main harddrives and one of them is partitioned. HD C is the main one with the OS and F and G are the partitioned ones. Right now, I can open files on HD G, but everytime I try to open F, it freezes and then asks me if I want to format the drive. I have very important files on this, and I need to recover them. Which programs(free) should I use? Links? Thanks in advance.
 

Answer:Please help: Can't access harddrive

What OS are you using?
Assuming 2000 or XP, what does Disk Management show for that partition?
 

2 more replies
Relevance 44.69%

Hi,

Hope someone can help me.

Something happened to my hard drive, and it ran checkdisk, but I guess could not repair it, it says there is not enough space to repair it. There was about 12gb free on the drive, it was a 500gb drive.

The drive is NFTS.

It is not my boot drive, just one of my 500gb data drives, music actually.

When I ran FileScavenger on the drive all the files are there, and when I recovered some to another drive they were fine. There are 27000 files on it. I could transfer all the files off the drive, but that would be a lot of work, take a lot of time, and I would have to buy another drive to put them on.

So the data is there and intact, just for some reason it cannot be "seen".

I assume this is file structure table thing issue (pardon my technical jargon ) . MBR? FAT? not sure exactly.

Is there a way to rebuild it so that the data can be seen again? or do I have to do the transfer dance?

Thanks in advance.
 

Answer:Lost access to data on hard drive in Windows - how to get access back?

You will probably have to do the "transfer" dance, and reformat the drive. Chances are good that the drive is ok. The Master Boot Record (MBR) may be corrupted. There are utilities out there that can repair the MBR without destroying data
 

2 more replies
Relevance 44.69%

Hi all,

I have just installed Windows XP on my PC later on my antivirus prompt me that there is some kind of virus '"w32silly" need full scan. After scanning when i try to open my D: drive the following message appears with red mark "resycled\boot.com is not a valid Win32 application". I checked the task manager and system registery they are fine but I can't find valid suggestion over internet can anyone help me.

Thanks in advance
 

More replies
Relevance 44.69%

I took my harddrive out of a blown up computer which has windows xp pro.
My new computers harddrive has windows xp home.
I slaved the old hard drive in my new system so I can retrive my photos.
My problem is that I cannot access MY Documents which has my photos in them. However I can access all the other software and files on the drive.
When I use tho old harddrive to boot first. I cannot use the mouse or keyboard. How do I get to the MY Documents on my old harddrive?
 

Answer:harddrive access problem

what happens when you try to open my documents?
 

10 more replies
Relevance 44.69%

I have a 320gb Western digital sxternal harddrive. Yesterday, when I turned the comp on, a red question mark appeared on the destop shortcut for the drive. I went to MY COMPUTER and found the drive was no longer listed. When I click on the shortcut for thedrive, I receive the following message :THE DRIVE OR NETWORK CONNECTIONTHAT THE SHORTCUT "EXTERNAL DRIVE F.lnk REFERS TO IS UNAVAILABLE. MAKE SURE THAT THE DISK IS PROPERLY INSERTED,OR THE NETWORKRESOURCE IS AVAILABLE, AND THEN TRY AGAIN". The drive is running, I can feel it when I touch it and it is ilit up. Anyone got any ideas??

Answer:cant access external harddrive

Maybe open up the case and see if the connector came loose from the hard drive.

5 more replies
Relevance 44.69%

Lately every time I access a web page, or do anything on my computer
I hear my hard dirve beating little drums all the time. This might be the
reason my computer is slowing down. I have done a defrag so I know that is not the problem. I am using XP. Is there something else I can do to speed things
up?
 

Answer:My computer seems to access the harddrive a lot

Disable as many startup things as you can in MSCONFIG that don't need to be running all the time. Add more RAM if its not at a GIG or more already. Uninstall any programs you are no longer using or have never used. Run the disk cleanup utility for the drive and get rid of all temp and temporary internet files and the like. If using another browser, clear all those associated caches as well and shrink them down so they can't get so big in the first place.

Then, run defrag one more time, restart and see if that helps a lot or a little.

If you've been using the drive with the current installation of XP for a long time, sometimes the only good solution is to reinstall the OS fresh.
 

3 more replies
Relevance 44.69%

Hello,

for some reason I am getting Access is denied when trying to access the hard drive (c.

can you please help.

thanks

Answer:Access to harddrive is denied

It depends on where you are trying to access and what you're trying to do. What exactly are you trying to access?

For example, copying/deleting/modifying files in C:\Windows, program Files etc will usually give you a UAC prompt. Deleting/modifying protected system files will give you "acces is Denied"

You could always try taking ownership or giving yourself "permission" to that file/folder.

8 more replies
Relevance 44.69%

Hi, hope this is in the right section. But I think it has more to do with windows than hardware.

I bought an enclosure for my old broken desktop's hard drive, connected it to my laptop, but whenever I try to go into it it just says "Access Denied"

I have tried changing the drive's letter, I've looked at permissions and everything is ticked, and I've gone into advanced and changed ownership, yet it still says access denied.

I tried going into safe mode and I can access it, and I copied a random file over to my C drive and it works. So I'm assuming its not a hardware problem, it just refuses to give me access on my regular (administrator) account.

I've tried searching around and most solutions seem to be the things I have already tried. Perhaps there are some settings I need to fiddle around with in safe mode, but I'm not too experienced so don't want to play around too much. So any advice on what to try would be great, it'd be a real hassle to have to go into safe mode and copy/paste everytime I wanted to access a file. I'm using windows 7 home premium or whatever silly name it has.
 

Answer:Cannot Access External Harddrive

Have you tried any other hard drives in the enclosure?
 

2 more replies
Relevance 44.69%

I put my old computers HD into my new comp but it says my user is not allowed to access it. Can i somehow format it without putting my old computer together again?
 

Answer:Old harddrive is forbidding me access

This may help you: http://support.microsoft.com/kb/308421
 

1 more replies
Relevance 44.69%

i wanna share my harddrive out to my comps on my room but i dont want the computer upstairs to gain access to it

can i put a password on it?
if so how?
 

Answer:how do i block access on a harddrive

if you're using windows XP

open an explorer window (windows explorer) and go to Tools|Folder Options
Click on view.
the bottom option is "use simple file sharing"
turn that off.

Now you can set user permissions etc. when sharing files.
 

4 more replies