Computer Support Forum

BSOD windows xp sp3 code inside

Question: BSOD windows xp sp3 code inside

so i took a nap with my pc on, came back to a bsod. i have it set to not restart when i get a bsod so i can write down the info , here it is.


DRIVER_IRQL_NOT_LESS_OR_EQUAL

stop 0x000000d1 (0x000000c , 0x0000002 , 0x0000001 , 0xb7e50ae7)



NDIS.SYS address b7e50ae7 base at b7e2e000 , datestamp 48025d03


\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

hope you can figure out whats causing this.
thanks

Relevance 100%
Preferred Solution: BSOD windows xp sp3 code inside

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD windows xp sp3 code inside

What is your Anti-Virus program? How do you connect to the internet, is it Wireless or Wired? If Wired, update your Network Adapters driver. If you have a name brand computer (Dell, HP etc) go to the computer manufacturers Support/Download Drivers site and type in your Service Tag or Make and Model # and download the Network Adapter for your model. If you use Bit Defender AV:
Go to Start/Run and type ncpa.cpl and press enter. In the Network Connections, Right click the Local Area Connection/Properties/Internet Protocol (TCP/IP) Use other IP address....uninstall the anti virus security NDIS (Antivirus) mini filter...etc...

4 more replies
Relevance 53.3%

i7-7700kAsrock z270 Extreme432GB DDR4-2400 RamGTX 1080Ti FECorsair RM750xSamsung 960EVO 500GB M2Seagate barracuda 6tb x2Windows 10 64bit Build 15063
I've recently built, delided and overclocked my first pc. Everything was running just fine, until recently, I found out that pressing restart inside the windows start menu will shutdown windows, but will always freeze when it starts up again on the spinning dots. It freezes even if I overclock by 100Mhz. It freezes when I manually set multiplier to 45 even though its a 4.5Ghz cpu. The pc starts up just fine, runs just fine, and shuts down just fine. This only happens when I use the restart option inside windows or when an update causes it to restart itself.

I have my cpu OCed to 4.9Ghz at 140mV offset LLC3. Under load it's doing 1.28v. Temps never hit over 79C in p95. My OC is stable for 10 Hours p95 blend, 11 hours p95 small FFT, and an overnight memtest86. It has never crashed on me inside of windows.

Googling tells me that the cpu can't handle the overclock, but I'm passing these stress tests with flying colors. Not only that, but manually setting the cpu to 4.5Ghz results in the same lockup when restarting inside windows. This doesn't happen when I set multiplier to 44 or below, or on stock settings. I've tried updating BIOS from 1.4 to 2.0. I've tried reseating the cpu. Nothing works. Most times, it would restart, and get stuck on the spinning dots and do nothing. Sometimes, it would BSOD after getting stuck on the spinnin... Read more

Answer:BSOD when I restart inside of windows

That would be something for an overclocking forum. I think u will get better help there. But I was interested and analysed for u.

These are the results:


Code:
0x0000000A: IRQL_NOT_LESS_OR_EQUAL (16.05.2017 11:51:05) [Windows 10]

CAUSED BY: ntoskrnl

PROCESS: System

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility


0x0000000A on an OCed System:

Code:
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x0A = add QPI/VTT voltage

read this: Common BSOD Error Code List for Overclocking - Overclock.net Community
The GPU driver also crashed very often:

Code:
2017-05-26T01 36:16.996 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 36:16.997 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 49:09.063 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T01 49:09.063 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T02 04:10.159 Display driver nvlddmkm stopped responding and has successfully recovered.: .
2017-05-26T02 04:10.159 Display driver nvlddmkm stopped responding and has successfully recovered.: .


But i cannot say if the driver crashes because of the overclocking or has another cause.

Last word from me: MSI Afterburner is known for causing bluescreens too.

0 more replies
Relevance 53.3%

https://drive.google.com/open?id=1BJhjrNSaa6rIpQW1d4R_7aFvTuC0Czqx

google file of the .dmp, just started happening 2 days ago after an update so i'm assuming it's software related, doesn't happen constantly, sometimes i can go hours without blue screening, get a DPC watchdog violation when i let it error report

The bugcheck was: 0x00000133 (0x0000000000000001, 0x0000000000001e00, 0x0000000000000000, 0x0000000000000000). 

More replies
Relevance 52.07%

Hi there!

I built this computer about three years ago (august 2009), and I don't remember when BSODs started. When they started, I didn't notice any regular pattern, but now I am suspecting it's something related to Internet Explorer and Windows Live Hotmail website.

Usually this pc is always on, and I'm used to let my browsers (and their tabs) open, always ready to navigate my fav websites.
If I let Windows Live Hotmail website opend for a while (few hours? a day?) in IE9, a BSOD appear when I click again on that tab.

OS info:
My OS is 64-bit Windows 7 Professional SP1.
I assembled my PC in august 2009 (installing a full retail WinXP 64-bit), then I installed this OS in august 2010.

Hardware info:
Intel Core i7 920 @ 2.67 GHz
ATI Sapphire VAPOR-X 4870 1GB GDDR5
Asus P6T SE
OCZ DDR3 6GB 1600Mhz Platinum Tri Channel

During blue screen, I read something related to atikmpag.sys.
I googled it and I follow instructions for updating/reinstalling video driver, but I never solved the problem.
Ps: sometimes, when BSOD happens, I get nervous and don't give system time to finish the dump... I don't know if this could be a useful info ^^

If you need any more details, please let me know!
I really appreciate your forum and the help you always give people.
Thank you!

Answer:Windows Live Hotmail site inside IE cause me BSOD

Bump!

1 more replies
Relevance 52.07%

Hello there,few days ago i updated some of my pc hardware and went for Windows 7 Ultimate, wanted to try something new
But last few days im getting BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL or Kernel Power...w/e i have no idea what is that so i made those dumps, please help me!

Answer:Getting random BSOD, Windows 7 Ultimate (dumps inside)

Hello. You can see this thread to try to alleviate your problem. Stop overclocking if you are, for anything. Make sure you're running the latest video driver.

Update these drivers to the latest or uninstall them from the system if unimportant:

AsIO AsIO.sys Mon Dec 17 04:11:49 2007
spum spum.sys Sun Mar 22 08:35:35 2009

9 more replies
Relevance 51.66%

Hello, this morning I received a blue screen upon turning my PC on, this 'page fault in non paged area' happens during the windows loading screen so I'm unable to get into my PC to get any real information for you guys, I'll write down my PC specs and what I was doing on my PC yesterday that might've caused this, I hope it helps!

PC specs

Windows 7 64bit
Motherboard - Asus Z87-k
CPU - Intel i5-4670k ( I've tried booting in both the stock setting of the CPU and the oc'd setting, neither work
Graphics card - Nvidia 780gt 4gb
RAM - 8gb (2 sticks) DDR3 1600mhz corshair 9-9-9-24
SSD - Samsung 840 pro series 128gb (OS is on this)
HDD - Seagate barracuda 2tb
CPU cooler - Corsair h80
PSU - corsair 750w

Yesterday on my PC I installed the latest windows update and ran 2 games for the first time (apologies if this means nothing )

I had bsod issues in the past but they were due to an over clocked graphics card which has since been reset and I've been all clear since

The only other thing I can give you guys is a picture of the bsod that I took if that's of any use?

Thanks for reading this, I'd be very greatful for any help on this issue, I'm not too knowledgeable on PC's but I will do my best to give you more information if you need it, cheers guys!

EDIT - I ran windows startup repair and it said it couldn't fix my problem automatically

Answer:bsod happening during windows loading screen (more info inside)

Just a quick update, I triedbooting in safe mode and the bsod still happened

Any help would really be appreciated!

5 more replies
Relevance 50.84%

We just noticed today that extra code has appeared in the HTML on the homepage of our website. I think its some kind of blackhat SEO as the websites listed seem legit. The code is just before the </body> tag and is wrapped in a <b1> tag which I have never seen before.

I have copied the added code in below, hopefully someone can shed some light on this.
HTML:
<b1><font style="overflow:hidden;position:absolute;height:0;width:0">
Website Magazine and 24-7pressrelease.com.<a href="http://www.pearlny.com/">
Pearl EarringsS</a> than an automated way to crunch numbers.
Intuit was up to the challenge. QuickBooks Premier 2010 is the top-of-the-line
<a href="http://www.pearlmonkey.com/">Pearl Necklace</a>
e-mail types (like, "We've missed you"). You can then process the mailing and see a summary <a href="http://www.pearlny.com/">Black Pearls</a>
"With so much computer software selected and delivered online, many small software companies can reach a <a href="http://www.tjsdiamonds.com/">Diamond Rings</a> standard of excellence in 96 industry categories by evaluating
<a href="http://www.pearlmonkey.com/">Brown Pearl</a> <h6>
<a href="http://www.READDIAMONDS.COM/">Diamond Earrings</a></h6> <h5> All entrants benefit from receiving valuable feedback in terms of their
&l... Read more

Answer:Hidden code on homepage inside <b1>

Well, if it isn't supposed to be there you can check to see if your site is running ad or spyware here:

Check any URL you have a need to with this, I posted it in a thread recently.....

http://forums.techguy.org/malware-r.../873645-my-website-hacked-backd00red-org.html

http://www.unmaskparasites.com/ <<<< site checking tool, very easy to use
Similar thread from back in October>>> http://www.phpfreaks.com/forums/index.php/topic,274404.0.html?PHPSESSID=06ppd6r5jk1hi72harnrgcvji4

http://forums.techguy.org/malware-removal-hijackthis-logs/871970-strange-b1-html-tag-embedding.html
Read the stuff about shared Hosting.
 

1 more replies
Relevance 50.43%

I looked all over my computer and i cant find any file left from Nero 7. the only place i can find it is in my add/remove programs. I'm running vista x64.
i don't have the original install disk but if needed i can buy another I'm just hoping that there is a way to clean it from my system without spending money.
I am trying to install Nero 8 but it keeps saying i have Nero 7 installed.

The error i get when uninstalling is this:
___________________________________________________________________
Internal Error:

Custom Action DLL crashed on last call in function
'NeroAg_UnregisteredComEx'. The installer must now exit.

Crash Thread ID 800
Current Thread ID 2816
___________________________________________________________________

Please help!
 

Answer:Nero 7 can't uninstall, error code inside!

If you contact Nero Tech Support(and good luck getting anywhere with them), they should have an uninstaller file that will help.
 

2 more replies
Relevance 50.43%

Well my girlfriend is having problems with her computer, Here's the error report she gave me I'd be incredibly grateful for any help given

BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFFA800ACA26CF
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\070510-17331-01.dmp
C:\Users\Melissa\AppData\Local\Temp\WER-60325-0.sysdata.xml

I have one of those dumps that it says to check but I have no clue how to go about looking at them tried opening with notepad and well.. you guys can imagine how that went over if you've tried it, I'll attach it if need be. Also doing some goggling I wasn't able to find anything specific about this error or how I could decode it myself once again thanks for your help

Answer:Blue screen, Error code inside

Info on this particular error: BSOD Index

How to read the dump files: WinDbg Analysis Report

Stuff we need (we need all of the minidumps): http://www.sevenforums.com/crash-loc...d-problem.html

3 more replies
Relevance 49.61%

Hello

I'm having some troubles with a program called PWgen. I am unable to run both installed and portable versions.

OS: Windows 10 Pro 64, Fully updated and patched.

Emsisoft Anti Malware + WFC Control (binisoft.org) + HMP.Alert are installed on my machine.

This is what's in the error log

Faulting application name: PWGen.exe, version: 2.9.0.1, time stamp: 0x00000000 Faulting module name: PWGen.exe, version: 2.9.0.1, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x00001813 Faulting process ID: 0xc94 Faulting application start time: 0x01d3039aadc96d31 Faulting application path: C:\Program Files (x86)\PWGen\PWGen.exe Faulting module path: C:\Program Files (x86)\PWGen\PWGen.exe Report ID: 0e7796bd-7860-4264-b354-52ea17db8bc6 Faulting package full name: Faulting package-relative application ID:

I've tried sfc/scannow and it found no corruption.. Not sure what is the problem.

Any help?

More replies
Relevance 49.61%

Hello

I'm having some troubles with a program called PWgen. I am unable to run both installed and portable versions.

OS: Windows 10 Pro 64, Fully updated and patched.

Emsisoft Anti Malware + WFC Control (binisoft.org) + HMP.Alert are installed on my machine.

This is what's in the error log

Faulting application name: PWGen.exe, version: 2.9.0.1, time stamp: 0x00000000 Faulting module name: PWGen.exe, version: 2.9.0.1, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x00001813 Faulting process ID: 0xc94 Faulting application start time: 0x01d3039aadc96d31 Faulting application path: C:\Program Files (x86)\PWGen\PWGen.exe Faulting module path: C:\Program Files (x86)\PWGen\PWGen.exe Report ID: 0e7796bd-7860-4264-b354-52ea17db8bc6 Faulting package full name: Faulting package-relative application ID:

I've tried sfc/scannow and it found no corruption.. Not sure what is the problem.

Any help?

Answer:PWgen won't run. Error code: 0xc0000005. Details inside.

Hi, the portable version 2.9.0 runs on my fully updated Win 10 (see my specs 'My Computer' for which build I'm using).

Which is your build?
(Windows key + R, winver)

Suggest you try a clean boot and retry; if you are running the Creator's build or an Insider build I suppose there could be some incompatibility.

windows - What exactly is the scope of Access Violation ? - Stack Overflow
(Note - there are many duff web-sites which give spurious info if you search for 0xc0000005)

Note that the portable version writes a dat file to where the exe resides.

more replies
Relevance 49.61%

Error code 00000019, parameter1 00000020, parameter2 882fed10, parameter3 882fed30, parameter4 0a040004.

i got the error now the only thing i updated was my nvidia geforce 7600 gs to the newest drivers from nvidia.com which was 9.1 or w.e so i rolled it back to see if that was the problem...for no rsn the whole system just restarted today i usally leave my pc on all the time and this happend.any help?
 

Answer:pc randomly restarted today...error code inside.

Product: Windows Operating System
Event ID: 1003
Source: System Error
Version: 5.2
Symbolic Name: ER_KRNLCRASH_LOG
Message: Error code %1, parameter1 %2, parameter2 %3, parameter3 %4, parameter4 %5.


i also got this in the help center stuff
 

4 more replies
Relevance 49.2%

I've been backing up "My Documents" with CDBurnerXP because

1. I consider Windows Backups to be opaque and I prefer to keep them simple and to know what is going on
2. Windows Backups does some things I believe are risky so I will not use it
3. Windows 7 had a deep directory structure problem and I presume Windows 8 continues to
4. It's ridiculous to backup "Windows" when I really only care about the safety of my data and since I am a slow typist who can't type at 3 Gigahertz it seems unlikely that I will ever have produced enough data that won't fit in one piece of optical media
5. I prefer to use a backup medium that has no moving parts and no firmware and humidity and mechanical shock resistant and contains no software and nothing vendor specific and blank DVDs are one such medium
6. I don't understand how a "backup DVD" can get scratched if there are never children and animals in the building (movie DVDs are a different matter)

Unfortunately, I can't continue down this route because my Windows 8 is now inside VirtualBox and I can't seem to make CDBurnerXP and Windows 8 recognize a blank DVD as a suitable target for a backup.

I am looking for suggestions for DVD burning software that is free and is known through your personal experience to work inside VirtualBox.

Answer:can I burn a DVD from inside Windows 8 inside VirtualBox

I can't comment on VirtualBox, but the most popular free burning program is Imgburn. Although I have Nero burning software, I find the Imgburn to be easier to use for iso CD's and DVD's.

The Official ImgBurn Website

I also use Macrium for backing up my PC's, but I back up to separate hard drives, not DVD media. There is a free version of Macrium.

Macrium Reflect FREE Edition - Information and download

3 more replies
Relevance 49.2%

Windows installation encounter an unexpected error, very that the installation sources are accessible and restart the installation...
Error Code 0xC0000005 .....

im installing this on my friends pc Spec are way over then what w7 needs and hase more then mine. idk why hese geting this error its soon as i click install from the cd. ANYONE know a fix for this?

Answer:Problem Installing Wodows 7 7624 Error Code Inside

  
Quote: Originally Posted by StonR


Windows installation encounter an unexpected error, very that the installation sources are accessible and restart the installation...
Error Code 0xC0000005 .....

im installing this on my friends pc Spec are way over then what w7 needs and hase more then mine. idk why hese geting this error its soon as i click install from the cd. ANYONE know a fix for this?


Looks like to me that you had either a bad DVD burn or you downloaded a bad image from a torrent...I will send you the correct link and you can do a hash recheck to make sure it is okay

7 more replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

Answer:BSOD playing games, so far 5 multiple BSOD errors, listed inside

Solved it after a long few days. Memtest never showed the RAM was broken, but my RAM seemed to be the issue nontheless. I solved it, thanks for the help.

1 more replies
Relevance 48.38%

Hello,

So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible.

Since last friday or so, i've suddenly encountered a BSOD. Now, i've had them before and it was only once. After a reboot it usually never happend again and everything was cool. But since friday, they popped up again. Mainly during playing Battlefield 1, but i've also had it happen during Dragon Ball: Xenoverse 2.

I've had multiple BSOD errors, which are:

- IRQL NOT LESS OR EQUAL
- BAD POOL HEADER
- MEMORY_MANAGEMENT
- SYSTEM_SERVICE_EXCEPTION
- APC_INDEX_MISMATCH

Now if it were one, I might've been able to pinpoint the issue, but.. They're constantly different errors that happen. Now, to explain a bit more in detail how it goes:

So i'm just playing a match of Battlefield 1. After 10/15 minutes give or take, it'll bring me to the blue screen. After processing whatever it has to process, computer shuts down and it starts to restart. At this point it will be stuck in an infinite restart loop, where my monitor will not display anything as well. It just says it's not connected to something, which it clearly is. After manually closing and rebooting, i'll have to do this a few times or mess with the HDMI a little bit before I get my monitor to pop up again. Once that happens, I get stuck in the beginning screen where you can see your HDD/SSD installed. It won't go further than that unless I ... Read more

More replies
Relevance 47.56%

Hi everyone, I'm trying to update my Sony VAIO Flip 13 (SVF13N17PXB) with Windows 8.1 Pro to Windows 10 Pro. During the installation process (Installing features and drivers part) I get stock on 6% of "features and driver installation" (for like a good 30 min). Then installation get stock on 71% (overall % completion), a time at which I get a BSOD (DRIVER_POWER_STATE_FAILURE).
After the restart (rolling back to Windows 8.1 of course), I get a windows update error: C1900101-40017.
I suspect this is a driver issue, does anyone have this same problem and knows what might be causing this issue (I successfully updated my Sony VAIO DUO 11 in ~20 minutes with no problem, and my drivers and Windows updates in that computer were really out of date so I don't know what the issue might be).
Thanks everyone beforehand

Answer:Getting BSOD Windows 8.1 Pro to Windows 10 Pro (at ~72%) - Windows update error code: C1900101-40017

No body having this issue? Well that's interesting

2 more replies
Relevance 47.15%

here is the file sir -
here is the other info:
? OS - Vista/ Windows 7 ? windows 7
? x86 (32-bit) or x64 ? 64 bit
? What was original installed OS on system? i purchased this rig without OS
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? I downloaded it from the net
? Age of system (hardware) 2 months
? Age of OS installation 2 months have you re-installed the OS? yes
? CPU - Intel Core 2 Quad Q8400 @ 2666Mhz
? Video Card - Nvidia GeForce 9500GT 1GB
? MotherBoard Gigabyte G41MT - S2
? Power Supply - OCZ modStream 500w

hhope someone can help me to fix my problem.

Answer:BSOD windows 7 64 bit. I need Your Help. BC code 3B

should i post the blue screen view?

1 more replies
Relevance 47.15%

Hi i was playing league of legends and after the game loaded i had a black screen computer was not responding at anything i was playing with my brother and i noticed that my computer was running but i was disconnected from both league of legends and ventrilo after i restarted my computer i got a window sayign Windows has recovered from an unexpected shutdown and it came up with this

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 117
BCP1: FFFFFA8005CE74E0
BCP2: FFFFF88002CF4DB8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\092912-43196-01.dmp
C:\Users\bn\AppData\Local\Temp\WER-82415-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

should i be worried about happening again and destroying my computer or it wont happen and it just happened randomly?

Answer:Bsod on windows 7 Bcc code 117

Hello Bloobity BOO, and welcome to Seven Forums.

Please go ahead and read the link below to post back with the needed information for someone to hopefully be able to help later with it.

Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 46.74%

Hi, I've recently installed Windows 7 32bit onto my system, which seemed to be going swimmingly.

Of late however, mainly when watching videos online or sometimes copying files across, the computer reboots and sometimes has an error Locale ID: 2057 upon startup.

Is this a graphics card compatability problem, or a RAM problem or any other?

Any insight is greatly appreciated.

Answer:Windows 7 BSOD Code: 2057

I've uploaded the latest minidump here

4 more replies
Relevance 46.74%

Hello all.

I have a pc that I put together last june (June 11) and put in a few upgrades about 4 weeks ago.

Today, for the first time, I have received 3 BSOD's.
The first two occured while I was using my pc, and doing several things on it, including working through my company's VPN and watching a video. The third occured when I closed everything but the VPN, and was afk.

After each BSOD, my boot drive didn't appear in the boot menu in my bios. I turned off the pc for under 2 minutes each time, and when I started it back up it did show up.

The boot drive is a SSD, so heat shouldn't be an issue.

My system specs:
psu:
corsair hx750 750w
newegg.com/Product/Product.aspx?Item=N82E16817139010
video card:
evga geforce 570 2560MB
newegg.com/Product/Product.aspx?Item=N82E16814130687
Ram:
Corsair vengeance 8gm (4gb x 2)
newegg.com/Product/Product.aspx?Item=N82E16820145345
processor:
intel core i5 3.3ghz
newegg.com/Product/Product.aspx?Item=N82E16819115073
boot drive:
crucial m4 64gb ssd
newegg.com/Product/Product.aspx?Item=N82E16820148441
motherboard:
asrock p67 mobo
newegg.com/Product/Product.aspx?Item=N82E16813157229

There's also a 600gb data drive i had from an older pc. The drive is about 2 years old, and is a Western Digital (caviar i think), but I don't have a link or much by way of detail for it.

The video I was watching both of the first two times was on an external drive, not the ssd or the data dri... Read more

Answer:BSOD x 3 with code f4, Windows 7 Ultimate x64

CRITICAL_OBJECT_TERMINATION
Ntoskrnl.exe

SSD's do complicate things. It it set up as AHCI in the bios? Take a look here:
http://forums.guru3d.com/showthread.php?t=313676
 

1 more replies
Relevance 46.74%

I randomly get a blue screen while typing on my keyboard. It only happens when I am typing, never when the computer is left idle.

The blue screen code is 0x000000b8. I am running Windows XP Service Pack 2.

I did a search on the web and it brings up whole lot of stuff for Win2k.

Could someone help?
Cheers
Gina
 

Answer:BSOD code: 0x000000b8 on Windows XP

16 more replies
Relevance 46.74%

Hi guys,

I did a search in relative to my error but couldn't find a solution from some of the previous thread with the same error code.


I get the following blue screen message:
Error:

A problem has been detected and windows has been shut down to prevent damage to your computer.

A wait operation,attach process, or yield was attempted from DPC routine.

If this is the first time you’ve seen this stop error screen, restart your computer.If this screen appears again,follow these steps:

Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components,restart your computer, press F8 to select Advanced Starup options, and then select safe mode.

Technical information:

*** STOP: 0x000000B8 (0X00000000,0X00000000,0X00000000,0X00000000)

Begninning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

I've attached my logs from Event Viewer and Minidump. Also, I've reinstalled my video card driver with the latest one available from ATI (my video card is ATI Radeon 9600 series), and upgraded from SP2 to SP3. Note that my problem was around even during ... Read more

Answer:BSOD code: 0x000000b8 on Windows XP

16 more replies
Relevance 46.74%

Here's what the windows log reports:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000047
BCP2: FFFFF80002CFDEF8
BCP3: FFFFFFFFFFF0BDC0
BCP4: FFFFF80002E49E80
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\062110-20280-01.dmp
C:\Users\Alex Hollis\AppData\Local\Temp\WER-38969-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


This Blue Screen occurred right before I shutdown last night. As far as drivers go, I recently updated my chip set and Graphics card drivers, because I was having Blue Screens, and lockups. If someone could decode this to let me know where I need to look in order to solve this problem, that would be highly appreciated.

Answer:BSOD Windows 7 Ultimate X64 Code: 1E

You will find alot of help here:
SF Diagnostic Tool - Using for Troubleshooting
http://www.sevenforums.com/crash-loc...d-problem.html
Crash and lockup debug 'How To' - Windows 7 Forums

1 more replies
Relevance 46.74%

Hi Guys of recently i have been experience Constant BSOD. I read on forums that it had to do with the Killer Network. I know Im a Windows 7 User and this is Windows 8. But i really need help , Im on the brick of Selling my Gaming laptop and purchasing a New laptop but i refuse to throw in the towel. Please help me. Much appreciated

Answer:BSOD Code 116 On MSI GT70 on Windows 7

Your attachement only contains event log which is not much help to identify the problem, you'd need to run SF Diagnostic Tool - Using for Troubleshooting - Windows 7 Help Forums for everything including .dmp files, system info, drivers etc....

11 more replies
Relevance 46.74%

Hi,

Short history. I am having random BSOD since I built my computer, always the same issue. It never happens during load, always when I walk away and the screen saver is running. I actually never see when it actually happens. It's always the same bugcheck in event viewer. I was getting 1-2 a day. I then called Gigabyte and they had me go back into the bios and reset the XMP profile for the memory, but this time in the old style view and not in the HD panel view even though it was already at that setting. I am running the most current bios for my board. I didn't get one for 14 days straight. Then I had to 2 in two days. I ran Prime95 twice for 6 hours, both in FFT small and balanced with no failures or BSOD's. I did this with the screen saver off. I ran two other tests with the screen saver on, but with slightly different Turbo Boost settings and I then started getting BSOD's. I also used Gigabytes Easy Tune just to monitor temps. The tests that pass I used Intels Extreme Tuning Utility to monitor temps. Below is what I always get. All drivers are up to date and all motherboard drivers as well. I ran Windows memory checker all day and it passed. I could try Memtest86? Thanks for any help!

Dump File : 012314-21387-01.dmp
Crash Time : 1/23/2014 5:25:36 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`12acc028
Parameter 3 : 00000000`bf800000
Parameter 4 : 00000000`00200401
Caused By Driver : hal.dll
Caused By Address :... Read more

Answer:BSOD Windows 7 Help Always Same Bugcheck Code

Bugcheck 124's are always hardware-related.

Check your RAM by running MemTest86+ for a minimum of 8 passes.

RAM - Test with Memtest86+

9 more replies
Relevance 46.74%

Hi all,

One of my companies clients have complained that their machine keeps getting the Blue screen of death. 

We changed the settings so that we could see the stop error codes and wrote the debugging information into a small memory dump.

RDR_FILE_SYSTEM

Technical information :

0x00000027 (0xBAAD0073, 0x883768CC, 0x883764B0, 0x8E104C79)

rdbss.sys - Address 8E104C79 base at 8E0EE000, Datestamp 4a5bbfd2

More replies
Relevance 46.74%

Hello all, im a newbie :P

What it is iv just received windows 8 pro 64bit and had it installed for 2 days and since the last 3 hours iv being receiving 2 bsods and i was wondering could someone put me in the right direction on what the problem is? I have put an attachment with the info from a bsod reader to help out.
Now iv heard it could be my cpu clock, but when i had 7 ultimate and never seemed to have any problems of this sort, but much info would be much appreaciated.

many thanks
Ryan

Answer:Bsod Windows 8 code 0x00000133

This sort of error can be many different things. Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).

3 more replies
Relevance 46.74%

I randomly get BSOD 124, usually happens when running charting software. Today?s BSOD happened after about nine hours. Majority of that time I had some charting software (NinjaTrader) running and was surfing the web. While surfing the web I clicked on a video and bam got a shutdown. I did get a BSOD of a ?F4? earlier in the week, which I believe is a Hard Drive error. There is no record of it I assume since the hard drive was not active. The system was not idle or coming back from a sleep when it crashed. It happened when I turned on the computer and started loading programs. I currently have a Crucial SSD MX100 256GB running at the latest firmware. I ordered a Samsung SSD 840 Pro 256GB for swapping out the MX100.

Intel Diagnostic Tool Burn-In Test: Passed (WITH WARNING expected freq: 4.0 detected freq. 4.4)
Memtest86+: No errors after running test for 5 hours (4-6 passes)
Prime95: Unable to run. Read somewhere doesn?t work well with i7-4790K. Just shuts computer down no BSOD.

12/1/14
Uninstalled Malwarebytes
Replaced SATA controller driver from Intel 9 to Standard
Uninstalled easy tune
Uninstalled killer networks
12/2/14
Repositioned RAM cards on memory slots 1/3 to 1/2
ran sfc /scannow found and repaired errors
increased fans to performance mode in Corsair Link
12/4/14
Disabled Intel Turbo Boost in Bios

Specs:
CPU: Intel i7-4790K Haswell LGA1150 (No Overclocking)
MB: GIGABYTE GA-Z97X-UD5H-BK
Video Card: ASUS GT640-2GD3 GeFo... Read more

Answer:Windows 7 Ultimate x64 BSOD Code: 124

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800e58c028, bf800000, 200401}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------
Likely a hardware error from the 0x124 bugcheck.






Quote:
Intel Diagnostic Tool Burn-In Test: Passed (WITH WARNING expected freq: 4.0 detected freq. 4.4)
Prime95: Unable to run. Read somewhere doesn’t work well with i7-4790K. Just shuts computer down no BSOD.


The above points to some significant issues, possibly CPU.

Uninstall all Gigabyte applications/utilities. Reset all overclocks to default values, then run the Standard Test in IBT, and post back the results.

CPU - Stress Test Using IntelBurnTest

9 more replies
Relevance 46.74%

Hi, I've recently installed Windows 7 32bit onto my system, which seemed to be going swimmingly.

Of late however, mainly when watching videos online or sometimes copying files across, the computer reboots and sometimes has an error code Locale ID: 2057 upon startup.

Is this a graphics card compatability problem, or a RAM problem or any other?

Any insight is greatly appreciated.

Answer:Windows 7 BSOD Code 2057

Could you go into c:\windows\minidump ? Get the latest Minidump file (The first one at the top of the list), and put it in a zip folder. 7Zip is a free program, you could use that. Then Upload it here, so I can see what is causing the BSOD.

11 more replies
Relevance 46.74%

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

Answer:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

9 more replies
Relevance 46.33%

Workstation keeps crashing and from what I can see from the initial error code 100000d1 it typically ends up being a device driver somewhere. I don't know how to interpret these dump files so i've attached them below. I would really appreciate some help! Thank you in advance!
 

More replies
Relevance 46.33%

Hello all,
There's a problem that I've had with a computer that I'm trying to fix, and it's this:
You know how in the Windows 7 boot animation that there are the four balls that come together and make the Windows logo? Well, right before they form the Windows logo, the computer immediately crashes, and the error code is 0x7B.
I've tried running CHKDSK/R, just as the error suggested, but that didn't work. I have also tried running Startup Repair, which did, in fact, find problems with the boot settings. The computer still won't start up though. I've also tried doing System Restore, but that keeps failing. I can't upload any crash dump files, probably because it's right when the computer starts up, also since it doesn't say anything about a crash dump.
Aside from trying to reinstall Windows, is there anything I can do so that the computer starts up?
~yosefu_kun_98

Answer:Windows 7 won't start up - BSoD code 0x7B

So you can boot into safe mode or no?

6 more replies
Relevance 46.33%

Hello,

I work in IT received a pc with BSOD problem (HP 8100 Elite Convertible Mini Tower) , I thought that problem is in the Hard drive, I changed it with a used one and re-installed win 7 pro 32 bit deleting all partitions creating 2 partitions. after installing I installed only Linksys AE 3000 wireless adaptor ONLY. and I was copying files on network and suddenly I received BSOD. I grabbed information with SF Diagnostic Tool.

We use Hijri calendar in our region so the year will be 1436. but In Gregorian it's 28/01/2015 A.D.

Thanks in advance for help...

Answer:Just re-installed windows 7 32 bit,BSOD code:1000007e

Code:
Response Time (ms) Location
Deferred SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x8283c000 PsLoadedModuleList = 0x82984810
Debug session time: Wed Jan 28 20:21:10.581 2015 (UTC + 10:30)
System Uptime: 0 days 0:03:39.783
Loading Kernel Symbols
...............................................................
................................................................
......
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {c0000006, 8e803155, 8fb19a74, 8fb19650}

Probably caused by : hardware_disk

Followup: MachineOwner
---------
You are missing several Windows updates, incl. Service Pack 1. However, you appear to ... Read more

1 more replies
Relevance 46.33%

I recently built a gaming PC, and this past week or so, it will just randomly BSOD. It doesnt seem to have any real noticable trigger (happens while playing games or just using IE), and so far nothing i've tried has had any effect. Any help would be extremely appreciated.

Accidentally closed the error screen while typing this, but the other four lines below the error code were all zeros. if it happens again, i will update this post with it.

Dump files, Performance Report and System Specs

Windows 7 64-bit Home Premium
AMD FX-8150 3.6 Ghz 8-Core
AsRock 870 Extreme 3 R2.0
Corsair DDR3 1600 Mhz 2x4 GB
XFX Radeon HD 6870 2GB GDDR5 900Mhz Clock
Sanyo 26' LED-LCD TV
Western Digital 250 Gb 7200 rpm
Raidmax Rx 700 AC psu
Cooler Master Vortex Plus
Blue screened again, got the error report this time
To- writhziden, thank you for the help, will take some time to test all of these. Will post results.
Locale ID: 1033
Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80001EDB4E2
BCP3: FFFFF8801159BE90
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Answer:BSOD BC Code 1e Windows 64-bit Home Premium

Code:


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\Donovan702\Windows_NT6_BSOD_jcgriff2\011912-18189-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`01e1c000 PsLoadedModuleList = 0xfffff800`02061670
Debug session time: Thu Jan 19 22:14:39.585 2012 (UTC - 7:00)
System Uptime: 0 days 2:23:38.303
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging ... Read more

1 more replies
Relevance 46.33%

Hello everyone, i build a new set up, but unfortunately i'm experiencing a lot of BSOD with different name.
my build is the following one:
- Asus Z170A pro gaming
- Intel i5 6600k
- ram g.Skill Ripjaw V 2666 MhZ 2x8 Gb
- Gigabyte G1 1070
- PSu: EVGA G2 650 W
- Kingston 240GB SSDNowV300 - 2,5" SATA 3.0
- Corsair Hudro H55

i would like some help to find where is the problem in my new pc.
i will attach the zip file with the different minidmp file.
i really dont understand if it is a softwere or a hardwere problem really..

thank you

Corsair Hydro H55 CW-9060010-WW Sistema di Raffreddamento a Liquido per CPU All-in-One con Radiatore da 120 mmCpoCorsair Hydro H55 CW-9060010-WW Sistema di Raffreddamento a Liquido per CPU All-in-One con Radiatore da 120 mmCorsair Hydro H55 CW-9060010-WW Sistema di Raffreddamento a Liquido per CPU All-in-One con Radiatore da 120 mmCorsair Hydro H55 CW-9060010-WW Sistema di Raffreddamento a Liquido per CPU All-in-One con Radiatore da 120 mm

Answer:Several BSOD on windows 10, bug check code 0x00000124

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Easy, please remove them as it may cause trouble.
An easy way to get remove these drivers is by using a restore point prior the installation.

2 more replies
Relevance 46.33%

Hi people, I need help! (Too make a long story short) my Windows 8 desktop (as usual) broke and it wont boot up, whenever i try to do so,it goes straight into BSOD
The BSOD tells me that the operating system could not be load because a critical system driver/required file is missing or contains errors
tried everything to fix it (except recovery drives) i even tried to boot it in safe mode, no luck
Here are the screenshots (Cant make a dump, you already saw the reason why when you first read this :P)
Windows 8 BSOD when booting normally

Windows 8 BSOD when booting in safe mode (all types)

Please read this thread too: A question about making a Recovery drive (please read)
Thanks for reading!

Answer:Windows 8 Pro BSOD error code 0xc000007b

Hi KingHamster678,

The drivers mentioned in the crashes are Windows files.
It is very odd that some / a lot of the drivers are missing, this could be due to an infection.
Please read this tutorial for offline scanning for malware.
Offline scanning indicates a bootable Anti-Virus scanner needed in this kind of crashes.

10 more replies
Relevance 46.33%

Hello, I have a bsod. It happened while performing a defrag with Piriform Defraggler.

Windows error information:

BCCode a
BCP1 000000000000000E
BCP2 0000000000000002
BCP3 0000000000000001
BCP4 FFFFF800032E05A9
OS Version 6.1.7601
Service Pack 1.0
Product 256.1

I have included my system dump files.

your help will be greatly appreciated.

Answer:BSOD, the error code is a. Windows 7 Ultimate SP1

Before proceeding, I want to ask you a question ... is RAID anything must for you?

Till now, some network error is detected, and there is some hint of hardware failure. That is why I am asking it.

5 more replies
Relevance 46.33%

The other night, my Dell Latitude 2120 netbook froze, so I forced it to shut down. When I started it up again, I got the BSOD. I upgraded it many months ago from Windows 7 to Windows 10. The BSOD says:

Your PC/Device needs to be repaired

The boot configuration data file is missing some required information.

File:/Boot/BCD
Error code: 0xc0000034

You'll need to use recovery tools. If you don't have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.

I read on other forums that I am supposed to use a Windows 10 recovery disk or USB, but I don't have one. I used a tool to make my USB bootable with a Windows 10 ISO file downloaded from Access Denied .

I got my netbook to boot from the USB. I clicked "Repair your computer." Then I just saw a blue screen with a mouse. No option to actually do anything.

So I tried to reinstall Windows 10. I chose the upgrade option, which it says you can use if you already have Windows 10 on your computer and you don't want to lose all your files. I got this message:

The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)

Obviously, I can't do that since I can't start my computer with... Read more

Answer:BSOD Error Code 0xc0000034 on Windows 10

Hi Alicat and welcome to the forum.
You're going to need the Win10 Installation Media on a USB drive to repair the boot files. Here are instructions for downloading the Media Creation Tool from MS and using it to create the Installation Media
https://www.tenforums.com/tutorials/...-download.html.
Be sure to use Option 2 in the tutorial. You'll need an empty 3 GB or larger USB2 Drive. I'm not sure if the Media Creation Tool will work on the Vista laptop. If it doesn't work you'll need a friend who has a Win10 PC and can download the Media Creation Tool from the MS site and create the USB installation tool?

When you get the Win10 Installation Media created then we can walk you through the process of getting your laptop to boot from the USB Drive and getting to the repair section. From that point the repair should only take a few minutes. It involves navigating through a few screens, getting to the Command Prompt window, and entering 4 commands. Just post back when your ready.

I should tell you that there is always the chance that your hard disk has gone bad. Can you hear it spinning when you try to boot? Has the laptop shown any other signs of distress?

18 more replies
Relevance 46.33%

My sony vaio laptop with windows 8 crashes frequently without any BSOD or error code.

I am here attaching sf debug files. Please let me know , how to resolve this issue.

Thnaks

Answer:Windows 8 crashes without error code or BSOD

I see that Teredo Tunelling Pseudo Interface cannot be started and Bluetooth device is disabled. Is thatdone on purpose? If so, why? Please, elaborate what you mean by crashes...

11 more replies
Relevance 46.33%

BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8009DB4028
BCP3: 00000000B4092000
BCP4: 0000000000000135
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1


Is what I'm getting. Now I'm aware 124 usually indicates a hardware error, but I assure you it is not. It ONLY happens when I'm trying to play a flash game, OR A flash advertisement pops up. I've played S.T.A.L.K.E.R. Call of Pripyat for over 5-6 hours with no problems whatsoever with maxed settings and even an overclock for my processor on.

I basically know the cause, what I'm asking is, is there any fix for it? I'd rather not wait until adobe gets off their asses and makes a 64-bit flash, and I know of no other 64-bit web browsers that work well besides IE, which I dislike. Any input is greatly appreciated.

Thanks in advance ~
Fhoxx.
 

Answer:Windows 7 64-bit BSOD While watching flash. ( BCC Code: 124 )

Adobe have rolled out an beta of x64 Flash.

Does this happen even if you use different browser ?

Can you post minidumps? Perhaps that may give us some clues.
 

5 more replies
Relevance 46.33%

Hi

The BSOD started happening this week and since then it is occuring several times per day.

I ran BlueScreenView and i got the following specs:
bug check code: 0x00000109
caused by driver: ntoskrnl.exe
crash address: ntoskrnl.exe+75c40
File version: 6.1.7601.18044 (win7sp1_gdr.130104-1431)

I 'm completely lost on what is causing it. I checked ram and hdd for errors and both come clean (however I could not run extended checks since it takes a few hours and the BSOD breaks it). apparently all drivers are updated.

I dont't know what to do the BSOD. Help would be much appreciated.

Answer:Windows 7 - several BSOD per day, all bug check code 0x00000109

Hello diaspm, Welcome to SF

Nothing specific in those dumps im afraid to point at a particular cause
Bug check 0x109 wouold suggest a faulty driver or memory problems
I would first check all memory by running some diagnostic software
RAM - Test with Memtest86+
Disk Check
Hard Drive Diagnostic Procedure

Then if no faults found try enabling driver verifier
Using Driver Verifier to identify issues with Drivers
just remember if your pc wont boot after enabling then enter safe mode to turn it of again

Also you have many old drivers on your system you ned to update the old ones, heres a list of the ones that predate win 7

NTIDrvr.sys 25/03/2009 03:09:39
DKbFltr.sys 26/03/2009 03:15:42
usbfilter.sys 03/04/2009 11:39:51
UBHelper.sys 27/04/2009 08:48:19
AtiPcie.sys 05/05/2009 15:00:22
Rt64win7.sys 22/05/2009 14:52:30
mwlPSDFilter.sys 02/06/2009 10:07:30
mwlPSDNServ.sys 02/06/2009 10:07:39
mwlPSDVDisk.sys 02/06/2009 10:15:29
SynTP.sys 19/06/2009 02:33:58
RTKVHD64.sys 06/07/2009 09:18:54

9 more replies
Relevance 45.92%

Hi All.

We had a BSOD on one of our machines a week or 2 ago. we sent the report off to our IT people in Germany. They are now asking for the minidumps and/or Event logs, only trouble is i dont know the date of the crash as i wasnt working that day and i wasnt made aware of it. is there anything in Event viewer or minidumps that will stand out so i can locate reason behind the BSOD.

regards

Rich

Answer:Windows embedded 7. locating BSOD error code.

Welcome to the forum,

The minidumps would hold much more info than event viewer, there should be a folder in the root C:\Windows\Minidump where they are.

You can use Windbg to view them.

1 more replies
Relevance 45.92%

Hi,

I'm having trouble diagnosing and fixing this Stop code on my PC.

PROCESS1_INITIALIZATION_FAILED

0x0000006B (0xFFFFFFFFC0000020,0x0000000000000003, 0x000000000000000, 0x000000000000000)

I was running Windows 7 Home Premium 64bit from an early 64GB Kingston SSD. This error has occurred once before, and I simply format c: and started again, however after running flawlessly for about a month on this new install, the STOP has appeared again.

I have ordered a new SSD which should be delivered soon, but I want to understand why and how this is being caused so that I can avoid it in the future.
I don't want to spend several days re-formatting and installing the O/S and all my programs and drivers every month.

I have installed Win7 onto an old Maxtor HDD (that often clicks and gets stuck) which allows me to temporarily browse the broken O/S install for files and data. This is only good for diagnostics and troubleshooting though, not a viable solution.

The STOP error occurred only during power up, after having previously shut down successfully.

The computer had never previously hung or crashed during operation to BSOD. Installing Windows 7 onto a separate HDD using the same machine works successfully. So I assume (please correct me if I'm wrong) it is not a hardware/cable/compatability issue.
Safe mode will not boot - it crashes at the same stage as standard boot procedure, after BIOS/POST, after windows loading splash screen but before logon screen. I assume thi... Read more

Answer:0x0000006b BSOD STOP code Windows 7 will not boot.

Hello scotty89, post it following the Blue Screen of Death (BSOD) Posting Instructions.
It will provide us the necessary information to help you.

1 more replies
Relevance 45.92%

Hello! My laptop has been crashing rather frequently, and is starting to be a pain.

Microsoft Windows 7 Home Premium 64-bit, original installed OS on system, OEM. Bought in 2009. I have not re-installed the OS.

The BlueScreen that comes up has no line of data at the top on bold print! It has the STOP code at the bottom, but the screen only stays up long enough for it to quickly make a dmp file before it automatically reboots. Therefore, no idea what it's trying to tell me! Once it restarts successfully, the little window pops up with the BCCodes etc., and links to the Minidump folder.

Oldest saved Info (after the first time, when I was clueless and closed the window):

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: 0000000000000000
BCP3: FFFFF880039B2A28
BCP4: FFFFF880039B2280
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Newest saved Info:

Problem Signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003188A9A
BCP3: 0000000000000001
BCP4: 0000000000000018
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Checks in the Event Viewer reported consecutively:

Information 1/29/2012 9:44:20 AM Microsoft-Windows-FilterManager 6 None File System Filter 'SymEFA' (6.0, ‎2011‎... Read more

Answer:Windows 7 BSOD on start-up, STOP code but no reason

Update the following drivers. The drivers may already be the latest, so if you cannot find an update, do not worry too much about it. You may want to install the drivers in compatibility mode for Vista if the newest are still prior to July 13, 2009. Drivers - Install Vista Drivers on Windows 7 may be a useful resource.
Code:
iirsp fffff880`014a2000 fffff880`014b3000 Tue Dec 13 14:47:54 2005 (439f418a) 00019fb9 iirsp.sys
nfrd960 fffff880`016f0000 fffff880`01700000 Tue Jun 06 15:11:48 2006 (4485ef94) 0000ffcb nfrd960.sys
mdmxsdk fffff880`03272000 fffff880`03276280 Mon Jun 19 15:27:26 2006 (449716be) 00010210 mdmxsdk.sys
wacommousefilter fffff880`05df4000 fffff880`05dfc000 Fri Feb 16 11:12:17 2007 (45d5f401) 00005ace wacommousefilter.sys
adpu320 fffff880`01536000 fffff880`01565000 Tue Feb 27 17:04:15 2007 (45e4c6ff) 0003588d adpu320.sys
adpahci fffff880`014e0000 fffff880`01536000 Tue May 01 11:30:09 2007 (46377921) 00058e0f adpahci.sys
arc fffff880`015d5000 fffff880`015ee000 Thu May 24 15:27:55 2007 (4656035b) 00017fb4 arc.sys
PxHlpa64 fffff880`01bad000 fffff880`01bb8d00 Wed Mar 12 19:58:17 2008 (47d88a39) 0001d5ea PxHlpa64.sys
SiSRaid2 fffff880`019a4000 fffff880`019b2000 Wed Sep 24 12:28:20 2008 (48da86c4) 00011d5d SiSRaid2.sys
sisraid4 fffff880`019b2000 fffff880`019ca000 Wed Oct 01 15:56:04 2008 (48e3f1f4) 0001ec6b sisraid4.sys
adp94xx fffff880`01056000 fffff880`010d1000 Fri Dec 05 16:54:42 2008 (4939bf42) 0007c740 adp94xx.sys
lsi_fc ... Read more

1 more replies
Relevance 45.92%

Hey guys I just built my first system and everything was running great. I used the trial version of Windows 8 64 bit for about a week as I had to wait for my windows 7 to arrive. On windows 8 everything ran great with no issues. Then I installed windows 7 and ever since then when ever I leave my system alone for about an hour or two I'll come back to see that it has crashed because of the following error message below. I can use my computer all day gaming, video editing, etc. but when I close everything and leave for an hour I come back to see that i has crashed. I try to leave it on over night to install my steam games but always crashes after about an hour.

Any help would be great.

Error Message:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80070A4A10
BCP3: FFFFF800047C43D8
BCP4: FFFFFA80097AB010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\122112-20077-01.dmp
C:\Users\Ryan\AppData\Local\Temp\WER-58203-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Specs:
Intel i5 3570k @3.4 ghz
Cooler Master Hyper 212 Evo
Gigabyte z77 U... Read more

Answer:Windows 7 BSOD and receiving error code BCCode: 9f

Please follow those instructions
http://www.sevenforums.com/crashes-d...tructions.html

4 more replies
Relevance 45.92%

Hi all, need help pls

my win 7 went on blue screen
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800FFB6EDF
BCP3: FFFFF880030CB9E8
BCP4: FFFFF880030CB240
OS Version: 6_1_7600
 

Answer:BSOD error code 1000007e Windows 7 because of asmtxhci.sys

This is a USB 3 host driver. Did this computer come with Windows 7 pre-installed?
 

1 more replies
Relevance 45.92%

I need help identifying the driver causing the BSOD in Windows 10.0.14393.206.

It seems that every other set of MS updates causes this BSOD after I upgraded to Windows 10 about a year ago. My computer was stable for a few months, then an update would cause random crashes, then a few weeks later another update would stabilize my system, then update/crashes. Haven't changed hardware at all.

Currently, I have a BSOD every day since the last windows update about 3 weeks ago. I haven't been able to identify which driver is causing the issue.

Thanks

Answer:Daily BSOD in hal.dll with bugcheck code 133 since last windows update

All 5 dumpfiles from december blame:

Code:
BugCheck 133, {0, 501, 500, 0}

*** WARNING: Unable to verify timestamp for nvstor.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor.sys
Probably caused by : nvstor.sys ( nvstor+7468 )

Timestamp: Mon Apr 21 20:34:03 2014
Driver Description: nVidia Storage Drivers
Driver Update Site: http://www.nvidia.com/Download/index.aspx
First look on the supportpage of your mobo.

2 more replies
Relevance 45.92%

I need help identifying the driver causing the BSOD in Windows 10.0.14393.206.

It seems that every other set of MS updates causes this BSOD after I upgraded to Windows 10 about a year ago. My computer was stable for a few months, then an update would cause random crashes, then a few weeks later another update would stabilize my system, then update/crashes. Haven't changed hardware at all.

Currently, I have a BSOD every day since the last windows update about 3 weeks ago. I haven't been able to identify which driver is causing the issue.

Thanks

Answer:Daily BSOD in hal.dll with bugcheck code 133 since last windows update

All 5 dumpfiles from december blame:

Code:
BugCheck 133, {0, 501, 500, 0}

*** WARNING: Unable to verify timestamp for nvstor.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor.sys
Probably caused by : nvstor.sys ( nvstor+7468 )

Timestamp: Mon Apr 21 20:34:03 2014
Driver Description: nVidia Storage Drivers
Driver Update Site: http://www.nvidia.com/Download/index.aspx
First look on the supportpage of your mobo.

0 more replies
Relevance 45.92%

I'm having this BSOD since months ago and I can't find a good solution. Sometimes I can use my computer for over a month with no issues playing everyday for hours.. browsing the web etc. But sometimes like today I get 2 BSOD's on the same day playing for example Final Fantasy XIV ARR.

I tried many things before like Memtest, Cpu test, etc and I can't understand if my Hardware is the problem or some driver. I also have an after market Cpu Cooler so my temps are fine and my case has really good ventilation.

I uploaded this dumps a few days ago after I used Driver Veryfier. I got a C4 BC Code error on those Minidumps and the problem was nroskrnl.exe. Only with Driver Veryfier I'm able to reproduce this BSOD.. is always random when I'm just using my computer.

I uploaded those dumps here https://mega.co.nz/#!F8NlwYbT!eaXDPO...NYw21z3Mxt2S_Y

I uploaded my latest dumps on this post using the SF Diagnostics Tool.. any advice would be much appreciated

Edit with my specs:

Computer typePC/DesktopComputer

Manufacturer/Model NumberCustom Build

OSWindows 8.1 64bit

CPUi7 4770k 3.5 stock

MotherboardGigabyte Z87-D3HP

MemoryKingston HyperX 8GB DD3 1866

Graphics Card(s)GTX 760 2GB Gigabyte

Hard DrivesSeagate Barracuda 7200 RPM 64MB

Answer:Random BSOD BC Code 0x00000124 ntoskrnl.exe Windows 8.1

Uploaded my latest BSOD.. any advice will be much apreciated

12 more replies
Relevance 45.92%

I apologize for the length of my post, but I'm going to try to be as descriptive as possible. This is my first home-built machine, so I don't have the safety net of a tech support plan and am pretty baffled.

Background: I wasn't even using my computer when this problem started. I noticed the BSOD from across the room. I had installed Box.com's new syncing software earlier in the day. After installing it, Windows Explorer crashed a lot, so I ran a system restore to the point before I installed it. I also had some funniness where MSE asked to be validated again -- I think that was before I ran the system restore.

Current situation: When I boot up my computer, I'm given a choice to run something called Startup Repair or to try starting up normally. If I choose Startup Repair, Windows begins to load files, but I get a BSOD before it's finished. If I choose to start up normally, shortly after the Windows splash screen appears (but before the colorful animation begins), I get a BSOD that quickly disappears as the computer reboots automatically (I don't know how to stop this). This will happen repeatedly if I keep telling it to start normally.

BSOD code: I seem to get a different one each time. The most common one is 0x0000007E, but I also see 0x00000050, 0x00000019, 0x0000000A and others.

Things I've tried already:
- I removed one stick of memory, still got BSOD. Replaced it with the other stick of memory, got the same result.
- I tried using the Windows 7 CD to do a repair (or... Read more

Answer:BSOD as Windows starts - Different code each time, can't reinstall/rep

Today I figured out how to get to the Safe Mode menu. But when I select Safe Mode with Networking, I get a BSOD and the computer quickly reboots (too fast for me to see the BSOD code).

Anyone have any ideas what this could be? Does this sound like a faulty motherboard? This doesn't seem like a HDD issue, but I'm not an expert.

4 more replies
Relevance 45.92%

Hi,
About one week ago, I updated my toshiba satelitte l305-s5919 laptop (windows vista basic) and after a restart it since then, has not booted up. It will take about 10-20 minutes of 'booting' for a blue screen to come up with the error code 0x0000007e. I've already tried taking 2/3 memory sticks out and money in this case IS an issue. My laptop already came with the disks installed and I'm unable to order new ones. The computer is unable to boot in any mode and will not do any recovery options. PLEASE help. Thankyou for reading.

Answer:Windows Vista BSOD error code 0x0000007e

If you don't have windows disks, your options are very limited if you can't at least boot to safe mode command prompt. Have you tried using last good settings that worked as one of the boot options? If so, you may have no choice but to engage the help of someone that has a windows boot disk.

1 more replies
Relevance 45.92%

Hi all, I have a issue when i try to stop my pc i have a bsod : Windows 8 BSOD Driver_Power_State_Failure:
Bug Check Code 0x0000009F

Bug Check String DRIVER_POWER_STATE_FAILURE

Param?tre 1 0x0000000345474150

Param?tre 3 0x06C905F000000000

Param?tre 3 0x65831920FFFFFA80

Param?tre 4 0x049F28D0FFFFF802

Date du crash 20/02/1613 00:08

Architecture x64

Version majeure 15

Version mineure 9200
thanks advance.

here my file

Answer:Windows 8 BSOD Driver_Power_State_Failure Bug Check Code 0x0000009F

CompositeBus.sys is implicated in some of them. what is it? update it or remove it.

Also networking is implicated, possibly by NVidia.

11 more replies
Relevance 45.1%

hi all

i have just installed windows 7 onto this computer and every time i start up and get to desktop everything stops working, no mouse movement, no keyboard input, screen not refreshing or moving. i have run diagnostics on all the hardware nothing wrong there. however it works fine no hanging in safe mode. any help would be much appreciated specifications are:

3.4ghz intel dual core celeron d
nivida gefore 7100 gs
2gb kingston dual channel ram
foxconn rc4107ma motherboard

many thanks in advance

adio2k11

Answer:windows 7 stops at desktop no bsod no error code no restart

That points to a driver. Did you keep the drivers given by the Win7 installer and quickly updated via optional Windows Updates, then only import those missing in Device Manager?

Users can get in trouble with Win7 if they used XPired methods to change out all drivers. Win7 is the authority on its own drivers until performance points to problems with one.

If this behavior started after install, See if you have Restore Points to go back to the point where it started then install drivers one-by-one with time to check performance. Do the same with other Updates, in small groups if necessary to rule them out.

3 more replies
Relevance 45.1%

Every once and a while after starting up windows I will receive a BSOD, this did start happening after I started overclocking my computer, although I have since returned my bios settings completely back to stock yet I still am receiving a BSOD, so maybe it was just coincidental and something else is going awry.

After I get a BSOD I can simply reboot my computer and it will work fine, I've attached the zip from the SF tools to help diagnose my problem.

Thank you very much for your time, I truly appreciate it.

Answer:Occasional BSOD after starting up windows, Bug check code 0x0000004a

Welcome to SF wrath66 .

The same bugchecks point to the same culprit, that being BitDefender.

Code:
lmvm bdfwfpf
Browse full module list
start end module name
fffff880`02d68000 fffff880`02d90000 bdfwfpf T (no symbols)
Loaded symbol image file: bdfwfpf.sys
Image path: \??\C:\Program Files\Common Files\Bitdefender\Bitdefender Firewall\bdfwfpf.sys
Image name: bdfwfpf.sys
Browse all global symbols functions data
Timestamp: Mon Nov 14 19:16:17 2011
Driver Reference Table - bdfwfpf.sys

Code:
bdfwfpf c:\program files\common files\bitdefender\bitdefender firewall\bdfwfpf.sys
Please remove it completely.
You can use Microsoft Security Essentials as an alternative.

Please clear up your startup by following this tutorial.
Troubleshoot Application Conflicts by Performing a Clean Startup
Can you explain why Windows is some what half-installed?

Code:
SM Bus Controller The drivers for this device are not installed.
Marvell 91xx Config ATA Device drivers for this device are not installed.
Bluetooth Peripheral Device for this device are not installed.
ArcCtrl This device is not present, is not working properly, or does not have all its drivers installed.
Bluetooth Peripheral Device The drivers for this device are not installed.
Bluetooth Peripheral Device The drivers for this device are not installed.
High Definition Audio Device This device cannot start.
iPodDrv This device is ... Read more

8 more replies
Relevance 45.1%

Server has been experiencing a BSOD about once a week, but I cannot make heads or tails of the dmp log.
Look forward to any commects / assistance on this, thanks!

Attached is the log file.

More replies
Relevance 45.1%

Hi,

I am facing in-consistent BSOD with error code 0x7e and argument 0xC0000005 on Windows XP SP3. Pasting WinDbg log as instructed in BSOD posting instruction.
I am using Windows XP SP3 on core 2 duo machine.
log 1 :
-----------------------------------------------------------------------------------------------------------
Microsoft ® Windows Debugger Version 6.12.0002.633 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [E:\AshishS_MemoryDump\MEMORY_2_Jan_19\MEMORY_2_Jan_19.DMP]
Kernel Complete Dump File: Full address space is available

Symbol search path is: E:\mss
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer EmbeddedNT SingleUserTS
Built by: 2600.xpsp.080413-2111
Machine Name:
Kernel base = 0xe0b66000 PsLoadedModuleList = 0xe0bf24c0
Debug session time: Tue Jan 10 01:28:10.359 2012 (UTC + 5:30)
System Uptime: 0 days 0:42:08.042
Loading Kernel Symbols
...............................................................
................................................................
....
Loading User Symbols

Loading unloaded module list
................
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Answer:BSOD : with error code 0x7e and argument 0xC0000005 on Windows XP SP3

Please do the following if you will:

Edit your above post and delete the entire log - it takes too much space and isn't what we need. Instead,
Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

5 more replies
Relevance 45.1%

Before I got the BSOD, I was using my computer normally. It was working fine. The battery died, so I plugged my PC in and booted it up. After choosing Windows 7 from the "Choose an Operating System" menu, I saw the "Starting Windows" screen for a LONG time. (Over 2 minutes) The BSOD error is BAD_SYSTEM_CONFIG_INFO. After the BSOD, I tried to repair the PC. Here is what I have tried:
Startup Repair - Failed during setup (I don't understand what that means)
System Restore - It seems all restore points have damaged registry
CHKDSK - No errors
SFC - Repair pending which requires reboot?
I also tried to access Last Known Good Configuration, but F8 caused 1 of 3 things to happen:
-"Windows failed to start. A recent hardware or software change may be the cause" menu.
-Nothing happens (After startup repair is ran)
-Motherboard beeps a single time (Only happened once, at splash screen)
I am able to access regedit from the Recovery Environment. I can also access my Windows 7 partition through Windows 10, so it is not an issue with my HDD. Let me know if any more details are needed.

UPDATE: I ran Startup Repair 3 times, all with the same error.

More replies
Relevance 45.1%

Server has been experiencing a BSOD about once a week, but I cannot make heads or tails of the dmp log.
Look forward to any commects / assistance on this, thanks!

Attached is the log file.

More replies
Relevance 45.1%

I am unable to boot any Windows media.

Background:

My machine had been running Win 7 and Win 10 without problems. During an update of Win 10 it crashed with a BSOD - Your System Needs Repair - errorcode 0xC0000225. The update had copied about 60% of the files and went into a reboot. Then the BSOD. Since then I can not boot ANY windows media.

Boot Attempts:

HDD - Win10 x64 = BSOD
HDD - Win 7 x64 = BSOD
DVD - Win 10 Installer x64 = BSOD
DVD - Win 10 Installer x86 = Hang with Win logo
DVD - Win 10 Repair Disk x86 = Hang with Win logo
DVD - Win 7 Repair Disk x64 = BSOD
DVD - Win 10 PSE Rescue Disk x64 from Kyhi = BSOD
DVD - Win 10 PSE Rescue Disk x86 from Kyhi = Hang with Win logo
USB Bootable Drive - Win 10 x86 Bootable USB Drive = Hang with Win logo

* All media were tested on another machine and will load.
* Confirmed the media is actually the booting device in each case.
* The machine has 2 optical drives, both drives were tried

What Does Work:
Memtest86+ - Multiple passes with no errors
Memtest - Multiple passes with no errors

SlackoPuppy (a version of PuppyLinux) (both 32 bit and 64 bit versions) load and run fine. I can read the file structure of the bootable HDD. I can read my Data drive and transfer contents to a USB drive. Using SlackoPuppy which has a Firefox Web Browser - I can connect to the internet and everything works. I copied my data onto a USB drive for use on a backup system The data is intact.

What I have tried:

* I removed 2 GB of memory ... Read more

Answer:Can not boot any Windows Media, BSOD with error code 0XC0000225

How many passes of Memtest86+ did you actually run? You need to run at least 8-10 passes to complete the test.

6 more replies
Relevance 44.69%

Hi.
I'm using windows 7 ultimate x64.
For about 10 days now I've been encountering BSOD stating that display driver timed out with stop:0x00000116 and nvlddmkm.sys. ..
I tried the usual BSOD stuff but to no avail. ..

I uninstalled the display driver then installed the latest driver. ..
I uninstalled the display driver, deleted old files then clean installed the latest driver. ..
I noticed that the cpu temp is around 45?c idle and 60 to 68 working... so I changed the cpu fan with a new one and the cpu temp now is around 39 idle and 58 to 60 working. ...
I even rigged a fan for my gpu card...

All done with no effect except delaying the BSOD.... but when it happens it recurs quickly after restart (hard resef)...

My system consists of

Cpu Core 2 duo E7400 2.8 GHz
GA EP45UD3R
Point of view 9400 GT 1GB ram
4GB RAM as 2 modules

Please help me.

I'm frustrated as I can't use my computer.
I'm sending this from my smart phone. ..

Is the display card faulty ???

Answer:Windows 7 x64 BSOD display driver nvlddmkm.sys Stop code: 0x116

Hi zoghrob,

Welcome to the 7forums.

Please re-run the tool and upload the new zip file, there are some files missing.

1 more replies
Relevance 44.69%

My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.

When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.

Answer:BSOD Installing drivers after a fresh windows install, Code 0xf4

Welcome
Sounds like a driver, take driver verifier test
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it... Read more

1 more replies
Relevance 44.69%

I decided to finally purchase a new computer, but also installing my own GPU and PSU.
 
I got the computer itself in the mail, took it a part and everything worked fine. I installed my GPU drivers, and immediately got a BSOD.
 
Funny thing is, whenever I configure the BIOS to boot using the OnBoard graphics, it works fine. I then can disable my OnBoard graphics, then it will force the PC to use my Nvidia GTX 550 TI.
 
 
Yet when I configure the BIOS to start up with my PCI slot, it blue screens.
 
Any ideas? Ive tried to Re-Install windows, but it ends up doing the same thing. Thinking of just returning the PC all together since I have a 1 year warranty

Answer:BSOD with GPU inside PCI slot

Hi
 
to the BC forum.
 
Can you please post the exact make and model number of your motherboard, graphic card and RAM ? . 
 
Did you tried the latest Nvidia driver instead of the default one came with the card ?

6 more replies
Relevance 44.69%

Hello,

I recently change a lot of things in my pc, i5 ram ddr3 p8p67 pro and a I have random bsod. I have no problem during games since I changed my power supply. (I didn't format after the changement)

I noticed that there is a problem with ntoskrnl.exe and AsIo.sys.

On each dump, it seems to be the same cause of the crash

Please find herwith my dumps files

I really thank you for several Help

I can give you my configuration :
i5 2500 k
8 go ram ddr3 corsair 1600 mhz
p8p67 pro rev3.1 (last bios) (don't know if an update need to format)
gtx 460
seasonic 850 w
Windows 7 x64 ultimate

finally, the massage of the bsod deals with an uncorrectable hardware problem

Answer:Hello BSOD inside 0x00000124

In order to assist you better, we will need you to follow the http://www.sevenforums.com/crashes-d...tructions.html. Thank you.

3 more replies
Relevance 44.69%

When it happens, my com suddenly slowdown and freezes eventually (in 5-10 seconds)
 
Spoiler (Highlight to read)
On Sun 24/6/2012 11:05:58 GMT your computer crashedcrash dump file: C:\windows\Minidump\062412-25849-01.dmpThis was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x19E4D4)Bugcheck code: 0x116 (0xFFFFFA80077712B0, 0xFFFFF8800F3DC4D4, 0x0, 0x2)Error: VIDEO_TDR_ERRORfile path: C:\windows\system32\drivers\nvlddmkm.sysproduct: NVIDIA Windows Kernel Mode Driver, Version 301.42 company: NVIDIA Corporationdescription: NVIDIA Windows Kernel Mode Driver, Version 301.42Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 301.42 , NVIDIA Corporation).Google query: nvlddmkm.sys NVIDIA Corporation VIDEO_TDR_ERROROn Sun 24/6/2012 11:05:58 GMT your computer crashedcrash dump file: C:\windows\memory.dmpThis was probably caused by the following module: dxgkrnl.sys (dxgkrnl!TdrResetFromTimeout+0x214)Bugcheck code: 0x116 (0xFFFFFA80077712B0, 0xFFFFF8800F3DC4D4, 0x0, 0x2)Error: VIDEO_TDR_ERRORfile path: C:\windows\system32\drivers\dxgkrnl.sysproduct: Microsoft? Windows? Operating Systemcompany: Microsoft Corporationdescription: DirectX Graphics KernelBug check description: This indicates that an at... Read more

Answer:Y 570 BSOD (Whocrashed log inside)

hi!!, some days ago i was reading about that issue, and is because the driver of the video card that the laptop has installed is the responsible of the BSOD, just install the most recent driver, and forget the BSOD! l

3 more replies
Relevance 44.69%

Hello,

I recently change a lot of things in my pc, i5 ram ddr3 p8p67 pro and a I have random bsod. I have no problem during games since I changed my power supply. (I didn't format after the changement)

I noticed that there is a problem with ntoskrnl.exe and AsIo.sys.

On each dump, it seems to be the same cause of the crash

Please find herwith my dumps files

I really thank you for several Help !!

Sincerely,

Answer:Hello BSOD inside w124

I can give you my configuration :
i5 2500 k
8 go ram ddr3 corsair 1600 mhz
p8p67 pro rev3.1 (last bios) (don't know if an update need to format)
gtx 460
seasonic 850 w
Windows 7 x64 ultimate

finally, the massage of the bsod deals with an uncorrectable hardware problem

4 more replies
Relevance 44.69%

I get "Windows has recovered from an unexpected shutdown"
I've never seen it before because i'm usually away from the computer when it happens, possibly it does this when in sleep mode.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF880072A6817
BCP3: FFFFF880099D2900
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\101812-12246-01.dmp
C:\Users\Alex\AppData\Local\Temp\WER-13915-0.sysdata.xml

Feel free to ask questions.

Attachment includes Information with SF Diagnostic Tool.

Answer:BSOD Details Inside!

Your graphics driver caused both the BSODs update it:
Name AMD Radeon HD 6800 Series
fffff880`07216000 fffff880`07a27000 atikmdag Fri Nov 26 03:46:44 2010 (4CEF1F94)

Also do the following:
Install SP1
Uninstall Daemon Tools

Update the following drivers:
AMD High Definition Audio Device
fffff880`07ca0000 fffff880`07cc0000 AtihdW76 Wed Nov 17 13:02:04 2010 (4CE3C43C)

Realtek High Definition Audio
fffff880`094e7000 fffff880`09757c00 RTKVHD64 Tue Nov 23 11:14:08 2010 (4CEB93F0)

Realtek PCIe GBE Family Controller
fffff880`07b85000 fffff880`07bf5000 Rt64win7 Mon Mar 21 14:20:32 2011 (4D8750A0)

4 more replies
Relevance 44.69%

Hey guys, cant seem to solve this issue by myself. Please advise.My system configCPU: Intel E7200 - 375*9.5 @ 1.2750v (266*[email protected] default)RAM: Gskill DDR2 2x2gb 900Mhz CL4 @ 2.05v (800Mhz [email protected] default)Mobo: MSI P35 Neo3GPU: XFX 8800GT 710/1825/1000 (Core Clock/Shader/Memory)PSU: Corsair VX450OS: Windows 7 beta build 7000 64bitI am getting BSOD during startup, either during logon where one puts in the password or within 2 minutes after login.This doesn't happen every time.I have succesfully stress tested my overclock, 7 Hours OCCT and 4 hours memtest86+(6 loops). All temps are within limits, though I'm not sure about the northbridge. It was very hot when I touched it after 4 hours of successful memory testing.I got 3 BSOD consecutively on each restart after completing the 4 hours of memory testing. No bsod on 4th restart and after that.I was having a similar issue in Vista Ultimate x64 before i decided to try Win7.Below is my Windows debugger(x64) log.Please help me identify whats causing the BSOD.Microsoft ? Windows Debugger Version 6.11.0001.402 AMD64Copyright ? Microsoft Corporation. All rights reserved.Loading Dump File [C:\Windows\Minidump\030109-17234-01.dmp]Mini Kernel Dump File: Only registers and stack trace are availableSymbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbolsExecutable search path is: Windows 7 Kernel Version 7000 MP (2 procs) Free x64Product: WinNt, suite: TerminalServer SingleUserTSBuilt ... Read more

Answer:BSOD // windbg log inside

Hi there!

This may be a processor issue. You may want to get your processor tested at a local computer repair shop!

9 more replies
Relevance 44.69%

Hello.
I have dell 3521, lot blue screen before and after format.
Pls don't lock just move the relevant forum.

Answer:BSOD f4 , even after format zip inside

I can't take a look at the moment, but my experience is that F4's are usually a HDD issue.

Run the DOS version of SeaTools in the meantime and I'll take a closer look at the. dmp files this evening.

SeaTools for DOS and Windows - How to Use

4 more replies
Relevance 44.69%

Hey all, very frustrated here, any help would be brilliant.



If need anything else ill do my best.

John

Answer:Several BSOD all different, details inside.

Hello JT and welcome to Sevenforums!

To be able to help you we'll need a little more information on a few things. Please read the below tutorial, to figure how to make a complete post. By that, we're able to investigate your crashes to the end. If you're having any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

Thank you for you attention!
Frederik.

9 more replies
Relevance 44.69%

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


please help i am not to good with computers

Answer:BSOD please help codes inside!!!

  
Quote: Originally Posted by harlee123


Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
please help i am not to good with computers



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* ... Read more

9 more replies
Relevance 44.69%
Question: BSOD files inside

Hi there,

I've been experiencing a lot of BSOD since purchasing my new laptop.
I thought i fixed the problem with a fresh instal, but it's happening again.

Whenever i run verifier.exe, it causes a blue screen. I removed both sticks of ram separately, and still had the problem. I'm currently running in safe mode /networking, as that's the only way it will start without immediately going into blue screen (i believe verifier is still making this happen after a restart)

Here's the error report -

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: FFFFF8800951D495
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: FFFFF8800951D495
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

the mini dump files are attached, as well as the Windows7_Vista_jcgriff2 instructions files, however i when i ran perfmon /report, all i get is this -

An error occured while attempting to generate the report.
The system cannot find the path specified.

The rest of my system details are below -

? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? 64
? What was original installed OS on system? Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full retail (Home Premium)
? Age of system (hardware) 1 month since purchase
? Age of OS installation -... Read more

Answer:BSOD files inside

here's the perfmon /report i couldn't get working earlier -

I have disabled verifier, and running in regular windows mode but it seems like my entire pc is running slower now, as well.

14 more replies
Relevance 44.28%

My computer experiences problems everyday. I installed a fresh copy of windows and formatted my computer, thinking that would solve it, but it didnt. I get this in a report. I have also included PERFMON+BSOD report. I hope someone can help

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002B02AF7
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\072212-17284-01.dmp
C:\Users\Danny\AppData\Local\Temp\WER-25896-0.sysdata.xml

Answer:(BSOD) Full report inside.

There are 2 dumps in the upload, one naming atikmdag.sys(video driver) the second
casino.exe which probably is video related.

2 dumps naming different process on a new install is usually hardware related, any chance you have another video card to test with?

We should probably also take a look at the temps and volts on the system. D/L and run Hardware Monitor do something intense like a virus scan or gaming for a bit, Alt+Tab back to HWM expand all the trees and use the Win7 snipping tool to grab a screen shot of the HWM window, post the screen shot using the paperclip button in the advanced message box(Go Advanced button).

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Owner\_jcgriff2_\dbug\__Kernel__\071812-21106-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02a19000 PsLoadedModuleList = 0xfffff800`02c5d670
Debug session time: Wed Jul 18 19:29:16.582 2012 (UTC - 4:00)
System Uptime: 0 days 2:41:25.862
Loading Kernel Symbols
...............................................................
........................... Read more

5 more replies
Relevance 44.28%

I had alot of things going on at once and not sure which one may have cuased the BSOD.
I had Swtor open on my main monitor, and my secondary one had a youtube video open as well as 5 other tabs open in chrome, and i had a HD video playing in VLC. All of a sudden crash so im posting the dump here for someone to look at. thanks

Answer:BSOD & SWTOR (Dump Inside)

nVidia High Definition Audio and Cisco VPN are disabled. Is this deliberate? If so, why?
Please enable these programs/devices, update their drivers, and then (if so desired) re-disable them again.

EVGA Precision (along with Riva Tuner and MSI Afterburner) are known to cause BSOD's in Win7 systems. Please uninstall this application immediately.

Your Abit uGuru drivers date from 2006. They must be updated or removed from your system.

Your nVidia System Utility Driver (nvoclk64.sys) dates from 2007. It must also be updated or removed from your system.

If you are overclocking, please stop while we're troubleshooting. Once we're finished and your system is stable, feel free to resume the overclock. The memory dump shows a small overclock (48 mHz).

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having di... Read more

9 more replies
Relevance 44.28%

Hello please help fixing this BSOD. If anything else needed to get the fix just ask.
Thanks in advance.

More replies
Relevance 44.28%

I have a Dell D620 running windows 7. In the past couple months I have had a handful of BSOD's at start up. The sign in page comes up and boom Blue Screen. Attached are the dump files.

32 bit OS
Core2 Duo
4GB ram

Answer:BSOD- Help needed Dumps inside

  
Quote: Originally Posted by cerveza1980


I have a Dell D620 running windows 7. In the past couple months I have had a handful of BSOD's at start up. The sign in page comes up and boom Blue Screen. Attached are the dump files.

32 bit OS
Core2 Duo
4GB ram


The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following:
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\032710-18330-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not b... Read more

2 more replies
Relevance 44.28%

Hey, When i play games after 10-15 mins my comp shuts down and i get the following:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1053
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800C38F010
BCP2: FFFFF8800FDFD8BC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\062313-31075-01.dmp
C:\Users\Martin\AppData\Local\Temp\WER-59748-0.sysdata.xml

I did this guide here with SF diagnostic and this is my zipfile. Please help!!!

my issue.zip

Answer:Bsod while playing game. (Zip inside)

Can no one help me?

6 more replies
Relevance 44.28%

Hello,

A little background:

Around a year ago I had signed up for Private Internet Access, which installs the TAP9 driver (OpenVPN I believe). I started to get blue screens on my machine (Win7 Ultimate x64), so I installed it on a 2nd Windows machine (identical OS). Same thing. As soon as I started the VPN, blue screen. I installed VirtualBox VM software, same thing on both machines. After trying various things, I ended up sending the motherboard back to ASRock (It was a Z87 Professional). They found nothing wrong, but I ended up doing a fresh install of Win7 and everything was great for about a year. Then I started having machine lockups and found out that my SSDs (Samsung 840 EVOs) were victim to the slowdowns that a lot of people were complaining about. I tried upgrading the firmware and running their "fix", then the blue screens started to happen again, this time at random times. Removed the drives, did a fresh install onto some WD Black drives, and everything was working fine. I thought the motherboard had finally crapped out as even with the onboard LAN ports, the network icon would end up with a yellow exclamation mark after about 5 minutes of usage. I had to use an add-on card to get it to work, so I decided to just build a pretty much brand new system.

I just built it today:
ASRock Extreme6/ac / Intel i7-5930K (brand new)
32Gb G.skill DDR4 (new)
Samsung 850 Pro (apparently these drives did not have the same problems as the 840s) (new) ... Read more

Answer:BSOD After connecting to VPN (details inside)

No one has any ideas either? I am stumped myself how this could happen. I tried connecting to a different router but with the same effect last night. Of course it's going through my FIOS router, but it kind of has to. I might try enabling the onboard Wi-Fi tonight and connecting via my phone's hotspot, I'm that much out of ideas.

1 more replies
Relevance 44.28%

So the BSOD has only happened once but i have had 2 weird graphical issues where swtor crashed and both monitors flashed then my right monitor gets covered in GREEN SNOW. drivers are up to date and the BSOD came after the second time i got the green snow screen and had to reset the pc to get the snow off the screen. Heres the dump file. I also ran Memtest immediately after the BSOD just to check and it ran for almost 3 hours with no errors. 8gigs of ram and it made it through 2 full passes in that timeframe.

Answer:BSOD & SWTOR (Dump Inside)

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\projectdwnshft\010712-20968-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03002000 PsLoadedModuleList = 0xfffff800`03247670
Debug session time: Sat Jan 7 14:18:10.236 2012 (GMT-7)
System Uptime: 0 days 0:04:32.845
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : usbuhci.sys ( usbuhci!UhciProcessDoneIsochTd+27 )

Followup: MachineOwner
---------

1: kd> !analyze -v
********************... Read more

6 more replies
Relevance 44.28%

Basically at the beginning of last month my computer started to have random BSOD issues. I have uninstalled/re-installed drivers and tried several other recommended fixes. Now I come to you for help. The requested files are attached in a compressed folder.

Running windows 7 64 bit, Radeon 5450, AMD Athlon II x 4 640 Processor (at stock speed). Age...approx 2 1/2 - 3 years old (maybe a little more). Age of OS installation - same as age of computer. System manufacturer - HP.

Model : p6754y

If additional information is needed please just ask.

Thank you for taking the time to look at this post.

Answer:BSOD Problems, reports inside, please help.

Hi,

We have various bug checks:

WHEA_UNCORRECTABLE_ERROR (124)

A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).

If we run an !errrec on the 2nd parameter of the bugcheck (address of the WER structure) we get the following:


Code:

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8006baf978
Section @ fffffa8006bafa50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000100f53
Processor ID : 0x0000000000000000
^^ BUS error.


Code:

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8006bafa08
Section @ fffffa8006bafb90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xfa00000000070f0f
^^ Specifically, a timeout occurred somewhere along the bus (Processor 0 - Cache Bank 4 - *main CPU core*)
SYSTEM_SERVICE_EXCEPTION (3b)

This indicates... Read more

1 more replies
Relevance 44.28%

For some time now my computer locks up with a bsod saying bad_pool_header but it varies sometimes. I have Windows xp sp2 with all the updates and i got the latest bios version too.

http://rapidshare.de/files/6201480/minidumps.zip.html
 

Answer:BSOD problem..(minidumps inside)

Just got another Bad_pool_header BSOD heres the mindump.

Please some help me!
 

9 more replies
Relevance 44.28%

First I was getting continues bsod and I figure out that maybe because I OC my CPU so I reset my bios to normal and my system work for long time without bsod.

Then it occurred later twice one after updating my nvidia driver to 320.18 a week ago so I figured maybe FireFox problem with the new nvidia driver so I unchecked option "use hardware acceleration when available" and there was no bsod for a week, today it occurred after start my system for just few minutes !!

? OS - Windows 7
? x86 x64
? What was original installed OS on system? Windows 7 64bit sp1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? retail
? Age of system (hardware) 3 years
? Age of OS installation - have you re-installed the OS? reinstalled but I dont remember when.

? CPU: i7 860
? Video Card: 460 gtx
? MotherBoard: Biostar i55
? Power Supply - brand & wattage: Cooler Master 850W Pro

? System Manufacturer: N/A
? Exact model number (if laptop, check label on bottom): Desktop PC

Thanks

Answer:bsod (full details inside)

Hi -

The 2 dumps in the zip are from February snd show the overclock -

Code:
BiosReleaseDate = 06/02/2010
SystemManufacturer = BIOSTAR Group
SystemProductName = TPower I55
MaxSpeed: 2800
CurrentSpeed: 3050
We need current dumps.

Run - http://www.techsupportforum.com/foru...ed-473665.html

Regards. . .

jcgriff2

`

8 more replies
Relevance 43.87%

I have a Gateway DX4710-UB301A, with an AMD Radeon HD 6600 series and Windows 7 Professional. It randomly blue screens, no matter what I'm doing at the time. The error codes are in the attached picture. Also I don't know if it's related, but I have 6 GBs of ram installed (two 2gbs,and two 1gbs), but the system settings AND the BIOS say that it only has 4gbs, and I ran the diagnostic and it didn't detect any problems.

Answer:Random BSOD on computer(errors inside)

Hi and welcome to TSF!

So many different crashcodes usuall indicates a ram / memory issue.
Also, some systems / mobos do not seem to handle mixing different types of RAM sticks well.

Please as a test, take out the two 1GB sticks. See if it runs more stable. Also for more specific help, please upload full info as described here:
http://www.techsupportforum.com/foru...ml#post2545708

2 more replies
Relevance 43.87%

i had BSOD 5 days ago on my Brand new self made computer , and then a system update happen 1 day after the BSOD of death(s) and it stopped for 3 days , and then it happened again , but this time , it BSOD and then restarted my computer for me it self . I uninstalled aero and any dvd driver virtual installer and installed sptd installer as people say that was the case of the bsod and how to fix it. But after all that , i wake up too a restarted computer saying windows have had a unexpected shutdown etc etc .

I have attached my dump files here .

my computer has the following ( just on my receipt)

Intel core 15-3750k Processor (6M cache , 3.40 ghz )

Gigabyte Z77x-ud3h Motherboard

Corsair 120gb neutron ssd

corsair 16gb (2x8gb) vegeance ddr3 1600mhz cl9

liteon ihas324 dvdrw black

gigabyte gtx660 Ti standard

750w xfx core edition psu

nzxt phantom bk full tower cs

coolermaster hyper 412 slim cpu cooler



really worried about it since i had so much hype for a new fast computer and then these BSOD keep popping up

thanks for your time and helping me out

Answer:BSOD randomly , Dumpfile inside ? please help , no clue what it is

Welcome
Dump files are not attached. Please follow these instructions to upload files and other documents
Blue Screen of Death (BSOD) Posting Instructions

2 more replies
Relevance 43.87%

Hello all,
First time posting here so let me know if I'm doing anything wrong.

So I have been having BSOD pretty regularly after a recent erase and install of Windows 7. At first it started off my keyboard would stop responding and I would have to restart my computer. The thing about that is it would hang at 'shutting down" and not do anything. Now I'm getting BSOD with mostly the same errors about twice a day with the keyboard thing. I tried using Verifier but it keeps crashing before it gets into windows. I'm attaching the dump logs from the SF Diag tool.

Answer:BSOD Few times a day 0x000000c9 (dumps inside)

Hi GenericHero, welcome to SF .

I can relate as Iwas experiencing pretty much the same things you are that is why when going through
the dumps the picture painted in my head was a dying motherboard, which is what I had .

How old are the components?

3 more replies
Relevance 43.87%

The error:

Assinatura do problema:
Nome do Evento de Problema: BlueScreen
Vers?o do sistema operacional: 6.1.7601.2.1.0.256.1
Identifica??o da Localidade: 2070

Informa??es adicionais sobre o problema:
BCCode: 1a
BCP1: 00008884
BCP2: 851CE8C0
BCP3: 851CF51C
BCP4: 00000500
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Arquivos que ajudam a descrever o problema:
C:\Windows\Minidump\061116-17940-01.dmp
C:\Users\Pedro\AppData\Local\Temp\WER-32635-0.sysdata.xml

Leia nossa declara??o de privacidade online:
Declara??o de Privacidade do Windows 7 - Microsoft Windows

Se a declara??o de privacidade online n?o estiver dispon?vel, leia nossa declara??o de privacidade offline:
C:\Windows\system32\pt-BR\erofflps.txt
----------------
I uploaded bluescreenview log and log collector
Pc was formated, installed drives, updated amd drive from oficial site, and for last updated all my drives with drive booster 3 pro and the problem persists.

More replies
Relevance 43.87%

Hello everyone i keep getting BSOD when i turn the pc off while using chrome with many tabs open (some of them tend to be youtube clips or any other flash player) so i unistalled chrome and insalled firefox i just got another BSOD watching a vimeo video. Here is my log hope you guys can help me.
Best Regards

Edit: Here is the windows log

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88010355DBB
BCP3: FFFFF880037E8328
BCP4: FFFFF880037E7B90
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100214-31247-01.dmp
C:\Users\Reis\AppData\Local\Temp\WER-133302-0.sysdata.xml

Answer:BSOD i suspect flash player (DM log inside)

Hi

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows
Report us for any further BSOD after installing Service Pack 1.

2 more replies
Relevance 43.87%

Dell Desktop Computer
date of purchase Jan 2011
Windows 7 Home premium Service Pack 1 64 bit OEM (original install)
Model: Studio XPS 7100
5.9 windows rating
Processor: AMD Phenom II X6 1045T Processor 2.7 GHz
8 GB of ram
AMD Radeon HD 6670 (brand new)

Tech guy at work suspected the video card. We replaced it with a new one and it still BSOD'ed

Initially when I am about to BSOD my display's will turn off. This is why we replaced the video card. Sometimes they come back on and I can proceed as normal, however when the audio cuts out I know it will then BSOD.

Once the audio cuts out or freezes on a note the BSOD will occur in about 10-seconds.

Thanks in advance dear gurus for all your help and consideration.

-Nick

Answer:BSOD - Crashes randomly about once per day.. details inside

Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.
Crashes are DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For AMD:Uninstall AMD Catal... Read more

3 more replies
Relevance 43.87%

Hello,
I'm sorry to bother you helpful people, but it seems that my Laptop (Asus X550L, Win 8.1) has been having random BSODs regardless of what I am doing. Hopefully I'll manage to upload the dump correctly :P

Thank you in advance!

Answer:BSOD can't point to specific cause (Dump inside)

Hi Kurgelis & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd00023eecc30, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd00023eecb88, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
------------------


TRAP_FRAME: ffffd00023eecc30 -- (.trap 0xffffd00023eecc30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe001a29c55a0 rbx=0000000000000000 rcx=0000000000000003
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801bf901bc9 rsp=ffffd00023eecdc0 rbp=ffffe0019d2fd100
r8=ffffd00023eecde0 r9=0000000000... Read more

3 more replies
Relevance 43.87%

PC Specs:

AMD Athlon FX-55
Asus A8V-Deluxe motherboard
Graphics Card(s): GeForce 6800GT (also tried Radeon 9800 Pro)
RAM: 2GB Kingston in 4x KVR400X64C3A/512 modules
HDD's: 2x WD Caviar 250GB 7200 RPM models (and an older WD IDE model) in a RAID0 configuration using the Promise FastTrack 378 controller.
Windows XP x64 Edition
PSU: CoolerMaster Real Power RS-450-ACLY ATX12V 450W

I use the onboard soundcard, and have no PCI cards installed.

For starters: I built this machine about two and a half years ago, and it has been rock solid for the last two and a half years up until about a week ago.

Here's my issue: I started getting various crashes, everything from DRIVER_IRQL_NOT_LESS_EQUAL to NTFS.sys or fasttx2k.sys (the onboard RAID controller of my motherboard's driver) to no BSOD and just random reboots.

I've got a fair bit of PC building experience and extra hardware laying around, so I decided to troubleshoot the problem for a bit myself before asking for help. I've cleaned all the parts with compressed air, and all the contacts of the RAM cards and my video card, but still no luck, the system still crashed.

I started by running memtest for a night, and it got through 8 passes on all 2GB of RAM with no errors. Kingston is usually quality RAM, so I didn't really think this was the problem.

Then, I unplugged my HDD's from the RAID controller, and stuck in an old IDE HDD I had laying around and formatted it to a new ... Read more

Answer:Numerous Crashes/BSOD's... info inside

Okay, this is what I found:

Your first two Minis point to driver fault with tcpip.sys which is a file essential for a Windows based machine machine to use tcp/ip protocols (use Networking or the Internet).

There was also this warning that ntoskrnl.exe was unabled to be verified by checksum; therfore there is the possibility it could be either corrupted or missing.


* Microsoft has information on errors with tcpip.sys


Third Minidump - amdk8.sys which is an AMD Processor Driver required by motherboards supporting AMD Athlon processors.

In all three minies you will find them pointing to either X64_0xD1 errors (the first two) or X64_IP_MISALINGED (third one).

I know you did a fresh reinstall of XP, but the dumps are pointing to faulty drivers as the issues. Could it be your CPU???

By the way, I know several people who have the same motherboard and they all say the same thing, "Rock Solid."
 

8 more replies
Relevance 43.87%

Normally I can get by these on my own, but my friend is having frequent BSoD and I'm very unfamiliar with this one.

Any help would be appreciated.

Information:
Gateway MX3701
-Windows XP
Probably caused by : ntoskrnl.exe ( nt+22f13 )

Minidump attached. (There were several, but they were all the same. This is the most recent one.)
 

Answer:Laptop giving BSoD, minidump inside

This minidump is a 1A error. Microsoft's recommended fix is to install KB931784: http://support.microsoft.com/kb/929338
 

1 more replies