Computer Support Forum

how to create system recovery in other partition in fresh installation ?

Question: how to create system recovery in other partition in fresh installation ?

Desktop PC : compaq SR1170NX, windows XP home edition

Probelm : IDE hard drive got crashed, replaced it with a new one.

Question : my old hard drive had a system recovery option in it, so if i had any problem before i just ran system recovery and it was good to go. Is there any way i can create a system recovery in another partition and set it up in same way like my previous hard drive. I done have recovery disk but i have windows XP home edition installation disk from where i did my installation this time using product key on side panel. please suggest

Relevance 100%
Preferred Solution: how to create system recovery in other partition in fresh installation ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: how to create system recovery in other partition in fresh installation ?

You would have to partition your main Hard Drive into 2 drives (Drive C: and D: or purchase another HDD) Once you get your C:Drive working perfectly and have all the drivers, updates and software you like installed, then you would Clone your C: drive to the D: drive using Ghost, Acronis or XXClone Then if your C: partition has a problem you can restore from your D: partition. Of course if the whole hard drive takes a dump, this won't help you, unless you had a separate HDD.

2 more replies
Relevance 85.28%

how to create the recoverypatition at the on new installation of windows 7

Answer:How to create recovery partition on new Windows 7 installation?

Recovery Partition - Create

3 more replies
Relevance 83.64%

Hi All

I installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?

Thank You
 

Answer:Solved: Does Windows7 Automatically create recovery partition during installation?

9 more replies
Relevance 83.23%

Hello!I just bought a Lenovo IdeaPad with a windows 7 32 bit version. There was no system disk added. I learned that the windows 7 version is hidden in a recovery partition. I now want to create a system disk to save the windows 7 32 bit version just in case and install a windows 7 ultimate 64 bit version on the computer. Can you tell me what I have to do? Thank you!

Answer:How to create a recovery system disk from the hidden recovery partition?

Hi and welcome,
One way is to save a recover set ... with OKR ... or better do this Backup before  ...but no way to get a  pure Windows 7 Install Disc if you mention this  ...  
 
And Windows 7 64 Bit will not run on Atom based machine.. i.e. S10/S10e/S10-2 ,S12 Intel/Nvidia ...
(and even when, it lacks of memory 2GB (due the intel chipset restrictions) is good for 32 Bit based systems, but not really enough for 64 Bit based systems, so there is no benefit for use a 64bit on a netbook)  
S10-3t W7 64 ?
 
sincerely KalvinKlein 
-------------------------------------------------- -------------------------------------------------- --
Want more ? For further information to get the most of your S-Class machine 
Lenovo Energymanagement Backup  Windows 7 Driver Windows 7  Install
XP Startup  Small WebCam Guide  Lenovo Easy Capture    Clean XP Install
Resolution > 1024 x 576 / 600  Works with XP Only Try this for a Windows 7 Solution 

1 more replies
Relevance 82%

Hi, I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps. Can you tell me how to recreate that partition on my ssd without messing things up? I googled for this but I can't find anything useful.

Answer:Create system reserved partition after installation

Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything)



Here's the reason why: http://www.eightforums.com/installat...tml#post390128

Now, back to your question:
In Your C: drive, create a partition of 350MB ie. 358400 = 350 X 1024 ===> this should give you exactly 350MBAssign the new created partition a letter, e.g Z:Download: EasyBCD Portable and run it, follow the instruction on the screen shot below then continue with step 4:

Make sure you mark this disk ActiveMark Inactive the other Disk that you previously had the reserved partitionOpen the BIOS and set first boot priority to the SSDreboot. <===== if it does not boot, you might have to do a startup repair.Once everything is working, remove the drive letter Z: so that the reserved partition is hidden.

4 more replies
Relevance 79.95%

Hello,

I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.

I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.

The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.

Really need your help here.

Please tell me what to do.

Answer:Setup was unable to create a new system partition - Installation Error

Do you clean the HD Drive, using step one of this tutorial:
SSD / HDD : Optimize for Windows Reinstallation

9 more replies
Relevance 78.72%

Greetings,

When I first purchased my Acer AspireOne D255 back in 2010, I immediately deleted Windows 7 Starter and installed a dual-boot of XP Home and Ubuntu. However, recently I decided that I want Windows 7 back on the Netbook, so I ordered Recovery DVDs from Acer.

I would like to set up an encrypted dual boot between Windows 7 Starter & Kubuntu 12.04. I found a great tutorial online explaining how to do this:

[not sure if I'm allowed to post links to other sites]http:// stonesifer.org/2011/07/01/dual-boot-windows-7-encrypted-with-ubuntu-1104-encrypted/

Problem is that the tutorial won't work for me because I don't have the 100 MB System Reserved Partition. I want to follow this particular tutorial because it's very simple, and it ensures that if I switch to a different Distro later I won't have to reinstall Windows 7.

Now I did successfully follow the "Option One" instruction here to use Disk Management to create a System Partition:

System Reserved : Create Using Disk Management

All this accomplished however is creating a small partition that is not active, and certainly not at the front of the disk, and definitely not set as a System Partition.

Please help! I've spent way too many hours / days at this trying to figure this out on my own.

Edit: I have been using the "Disk Utility" in a Lubuntu 12.04 LiveCD to partition the drive...

Answer:Acer Recovery DVD Won't Create 100MB System Reserved Partition

Hi,

You should first install Windows 7 in the vanilla fashion - that will create the 100MB System Reserved partition and the usual System partition (usually C)

Then follow the tutorial you linked. Be very careful with Truecrypt. Create a backup of the volume header : see STEP 3 here:
TRUECRYPT - Encrypt Data Folders

9 more replies
Relevance 78.72%

I am trying to install system recovery disk on this hp and when it is done downlaoding it says this error message"user partition cannot be created! system recovery cannot continue!" What should i do please reply with any answers to my problem, and thank you for your time.
 

Answer:failed to create user partition cannot continue system recovery

I'd start by downloading the disk manufacturer's diagnostic and running it. It may be that the drive is bad, which is causing you the issue.
 

1 more replies
Relevance 73.39%

Long story short:
My PC got user32.dll error and now I can't get to my desktop.. when I boot from my hard drive it says
"operating system not found"

so I decided o fresh install windows but when I get to the setup part and installing it says
"A media driver your computer needs s missing. This could be a dvd usb or hard disk. If you have a cd, dvd or usb flash drive with the driver on it please insert it now."
I don't know what to do!!

When I try to install it also says
" We couldn't create a new partition or locate an existing one. FOr more information see setup log files"
I can't even access my desktop and can't do anything!!

I figured out how to open CMD SHIFT +F10
 
but that's it!!
please help me
 
 

Answer:Can't create partition and I can't fresh install please help!

See if you can boot into the BIOS.
 
If you can, see if the hdd is recognized there?
 
What is the make and model of this computer?
 
What are you trying to use to reinstall Windows?

1 more replies
Relevance 72.57%

Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information."And i have no idea how to get around the problem. Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2All help is appreciated.Thank you in advance. P.s if i missed any info you need just ask

Answer:Windows 8 installation"System could not create a partition..." Help???

ok i figured out all i needed to do was to leave the space unallocated.
Once i did that it gave me a warning in the installation and then asked if i wanted to continue. i pressed continue installation and it started installing windows 8 CP.

Although im having a new problem now. After the installation it restarted and started windows 7 and i cant seem to get to windows 8?

11 more replies
Relevance 72.57%

In the last couple days I've been trying to install Windows 7 over Windows XP (clean installation).

Unfortunately I'm having a problem pretty early on in the process. Whenever I try to press "Next" on the screen that has you select which partition you want to install it on, it says for me:

"Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information"


I've tried deleting all of them, making a new one a certain size etc. with no luck. I even tried to load the C: drive but it said it wasn't able to reformat it for whatever reason (message I get is "Windows can't format C. Check to see that the disk and drive are formatted properly. Make sure that the disk is not read only, then try again.") I've tried logging into Windows in Safe Mode to change the security options for this problem but I don't see any preference about read-only properties.

I have also tried going through the steps in the stickied thread about this problem (using diskpart to mark a partition as active) and it hasn't worked.

(I am trying to wipe my computer completely clean and install Windows7, not along side XP or anything like that).

Anything you could suggest would be great, thanks in advance.

Answer:Installation Problem ("System could not create a partition...")

Did you run the WIn7 upgrade advisor to find if your hardware can run Win7? http://www.microsoft.com/windows/win...e-advisor.aspx

If you still have XP on the HD, update the BIOS to latest version from maker's Support Download's webpage for your computer or mobo model .

Boot the Windows 7 installer, press Shift F10 at bootup, opening a Command Line, type:
DISKPART
LIST DISK
SELECT DISK # (for Windows 7 disk)
clean
create partition primary
select partition 1
assign letter=c:
active
format
exit

Now boot back into installer to Custom install to partition you created.

If there are further problems, please reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Also in BIOS setup, check the SATA controller setting: Try AHCI first, then IDE if neccessary.

If these all fail, post back your System Specs at link in bottom left corner of your post.

9 more replies
Relevance 70.93%

I have a Compaq Presario CQ62 417NR having problems. It was bought used and at some point started having  cd-drive malfunctions where it no longer detected hardware and the drive didn't work. I reloaded completely from the recovery partition, it worked fine several days and I was able to install office but after that it stopped working again. I have tried an external usb cd drive but that doesn't work either. At this point, I'm thinking it has driver issues from the recovery and I'd need to buy the disk from HP but I'd like a second opinion as they are not free.
 
Does anyone have an idea of what the problem is? I've never had this happen on a fresh install...

Answer:Driver issues on fresh HP recovery from recovery partition

could you check on device manager does any yellow or red exclamation?

5 more replies
Relevance 70.52%

Hi there, Just wondering as i've asked around but still not too savvy on this subject. I have partitioned my main hdd into 2, one is for system install only and the other has programs / game installations. I want to put a fresh install on my system partition but wonder how difficult it will be to use the programs from the other partition, eg. Will i have any registry problems if i try to run the programs straight away? Some of these programs are hefty in size...

Thanks for reading ^_^

Answer:Fresh installation on partition

Always install your programs to the OS partition since they write registry keys which integrate themselves into the OS until uninstalled.

You can put your user data on the second partition by copying user files there then linking to the related Library - Include a Folder - Windows 7 Forums.

This way your backup image is more compact so if Win7 ever becomes irreparable you can reimage C in minutes while your data will be safe, current and intact on the data partition/drive. Backup Complete Computer - Create an Image Backup

1 more replies
Relevance 69.7%

ive got a shiny new xp professional SP2 cd, which i am about to use for a clean install to replace my 98se/xp dual boot, which is partitioned to logical drives c: and d:. i just want a plain c: drive running xp pro. i know xp formats the hard disk during istallation, but my question is this: will the xp format procedure wipe out logical drives c: and d: and replace them with a simple c:? (which is what i want), or do i need to format the hard disk myself first? ive got a 98 boot floppy which contains fdisk, do i need to use this to prepare the hard disc? one last question, NTFS or FAT 32?? (fdisk only offers FAT 32) PLEASE ADVISE!!!!!

Answer:partition removal for fresh xp installation

when you load in the xp disk you will get the option to delete the existing partition/s or create a new one. dlete them then create a new one. use ntfs

3 more replies
Relevance 69.29%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 69.29%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 69.29%

Hello, I don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact. Thank you for your time. Regards













Solved!

Go to Solution.

Answer:Create Recovery Media/Do Factory Resect without Recovery Partition

To reset your PCSwipe in from the right edge of the screen, tap Settings, then tap Change PC settings.(If you're using a mouse, point to the top-right corner of the screen, move the mouse pointer down, click Settings, then click Change PC settings.)Tap or click Update and recovery, then tap or click Recovery.Under Remove everything and reinstall Windows, tap or click Get started.Follow the instructions on the screen.NoteYou'll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely.
 
 
Refreshing your PC without affecting your files

If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Note
If you upgraded your PC from Windows 8 to Windows 8.1 and your PC has a Windows 8 recovery partition, refreshing your PC will restore Windows 8. You?ll need to upgrade to Windows 8.1 after the refresh has finished.


Warning
Applications you?ve installed from websites and DVDs will be removed. Applications that came with your PC and apps you've installed from the Windows Store will be reinstalled. Windows puts a list of removed applications on your desktop after refreshing your PC.


To refresh your PC

Swip... Read more

2 more replies
Relevance 69.29%

When I push the Q: recovery drive> Create recovery media, I get a message saying "Windows cannot find 'C:\Program Files (x86)\Lenovo\factory recovery\recovburncd.exe'. Make sure you types the name correctly, and then try again."How do I go about fixing this and creating a recovery disk?

More replies
Relevance 69.29%

I am working on my sisters Toshiba L655d-S5055 notebook. windows 7, 3gb, amd v120 processor, 250gb drive. Started with error msg at boot "encountered a problem communicating with a device at startup......". Couldn't get by this error. took out drive, inserted into usb-enclosure, and tested. numerous sector errors. She has also lost the recovery disks I made for her. I used partition software to scan just the recovery partition, and there are no errors reported there. What I would like to do, is to copy to a flash drive, or make new recovery dvd's from this recovery partition; then I can use the coa from the back of the notebook (if necessary) for full install onto a new hard drive. However, I can't use the toshiba notebook for this; I can only use my desktop pc for the xfer; using the toshiba hard drive as a usb external drive, and the toshiba media creator software will not install onto my desktop pc (doesn't give me a reason). I would prefer to go the dvd-route, but flash drive would be ok, too. Any info is appreciated. thanks.
 

Answer:how to create recovery dvd's from recovery partition mounted as usb-external drive

9 more replies
Relevance 68.88%

Hello all, I'm new here. I bought a Lenovo G50-70 at the end of 2014. I want to create a recovery media of my RECOVERY PARTITION. Ok I have Lenovo OneKey Recovery App v8 but with that application I can't create a recovery media of my recovery partition, I can ONLY create a recovery of my current partition (in this case: C: ). I don't want that my current partition has 119 GB. My recovery partition has 15GB, my question is: How can I access there to record it in a USB, DVD or my PC? Thanks in advance.

Answer:Lenovo G50-70 create a recovery media (of recovery partition)

macrium reflect





find joy.

7 more replies
Relevance 68.88%

Dear All. My T440s no longer has the recovery partition.I'm with Win 8.1 Pro, but I would like to restore the system. How can I do to restore and create a new Recovery Partition? Thanks,Lucas Mendes  

More replies
Relevance 68.88%

Hi, I am trying to create a recovery drive on a new ThinkPad Yoga 15, but that is failing because the recovery partition seems to be empty. - Computer Management > Storage > Disk Management shows 3 hidden partitions. All three are 100% free (empty). - Control Panel > Recovery > Create a Recovery Drive throws error "We can't create a recovery drive on this PC. Some required files are missing. [...] use your Windows installation disc or media." - The laptop shipped without any installation disc or media. - Running >reagentc.exe /info throws "Operation failed: 3. An error has occured". - Running >sfc /scannow results in "Windows Resource Protection did not find any integrity violations". Where are the recovery files, and how can I create a recovery drive on this system? Thanks.

Answer:Recovery Partition Empty & Can't Create Recovery Drive

The better part of a month later and still no reply from Lenovo Support? I would appreciate a response. I paid a lot of money for a device that does not work as advertised. Thanks.

2 more replies
Relevance 68.88%

Hello guys,'ve looked for everything that google and not found my solution.

Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"

I've tried to do some procedures, but also can not create partition, do not know what else to do.

I've tried also to give a "clean" and nothing also, can someone help me?

Thanks!!!

Answer:Setup was unable to create a new system partition - I can not create p

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

9 more replies
Relevance 67.65%

Hello to Lenovo support(and community)! My laptop: Lenovo G560 (I have noticed some variable specification) I have bought G560 and it came with around 500GB hard disk;partition C: 420-430GB which is for application software, operating system, and user documents.partition D: 30GB for OneKey system reocvery and needed files, perhaps for factory restore.and two more partitions but they are invisible and only found them by running disk management. Now the problem is that I have my files(documents), app software and operating system on the same partition and I want to have only the operating system on C and have app and documents on another partition OR have a new 200-300GB(taken from C) for backups partition.**I know it is not recommended to have backups on the same hard disk, but this is a temporary solution. How can I shrink C to have unallocated space and use it to create a new partition(or more) without corrupting the D OneKey Recovery partition?   Thanks for supporting your customers!!!  

Answer:OneKey System, Recovery partition, need repartition. Will it corrupt recovery partition?

Hello OLL98, welcome to Lenovo forums!
 
You canīt use Onekey Recovery anymore if you change the partitions.
 
So please create your recovery media before, messing up with the partitions. My 2 cents.

2 more replies
Relevance 67.65%

I've a laptop with two HDDs and no DVD drive.

How do I create a bootable recovery partition that holds the complete Windows 7 installation disc contents.

This has to be able to boot even when my first HDD with my OS on it becomes corrupt.

I also hope if you can guide me to do this without interfering with the current smooth boot I have. I don't want to choose whether I want to boot from my primary HDD or my backup partition on every boot. I just want to be able to choose to boot from that partition when I need to.

Answer:Create Installation Partition On Second HDD

Just do an image backup to the 2nd HD. Many free programs can do it. Macrium Reflect, Paragon... go to this site for even more:

Free Hard Disk Backup and Restore, Hard Disk Image and Cloning Utilities (thefreecountry.com)

8 more replies
Relevance 67.65%

I am getting this error while installing windows 7 again!
My earlier win 7 got corrupted and i am trying to reinstall it.
I am using USB drive.
I have tried re-inserting pen drive and diskpart method to set the location of the partition.but both solutions are useless!
What can be the reason and what should i do?

Answer:Unable to create a new system partition or locate an existin partition

The problem is all your partitions are Logical.
The bootloader needs to be installed in a Primary partition.

You can delete Partition 4 so it becomes Unallocated space.
Then Windows should be able to create a system partition and install.
Installing in Unallocated space Windows will create 2 partitions, a System Reserved partition for the bootloader and a C partition for Windows.

Or, you could delete Partition 4 and create a new Primary partition.
If you install Windows into that Primary partition the bootloader and Windows will be in the C partition.
You won't have a System Reserved partition.

I like having Windows as the first partition, before any data partitions, but that would be more work if you want to move partitions around before installing Windows.

9 more replies
Relevance 67.65%

Hi,

I have an ASUS which came with 8.1 OEM. I upgraded to Win 10 and now am about to do a fresh install of Win 10 (using this tool: Windows 10) on it.

It has 2 recovery partitions 20 GB and 500 MB.

Q1. During fresh install, do I need to delete both recovery partitions?

Q2. Just to confirm, recovery partitions only keep the newly installed OS backup right? I.e. wondering if I can keep older OS recovery on that?

Thanks

Answer:Fresh Install Windows 10 - Recovery Partition

crazyfool said:

I have an ASUS which came with 8.1 OEM. I upgraded to Win 10 and now am about to do a fresh install of Win 10 (using this tool: Windows 10) on it.



How to clean install Windows 7/8/8.1/10 64-bit in UEFI Boot Mode.

If you want to do a complete clean install and if you have backed up your important files.

Normally, you do not need to turn Secure Boot off to install Windows 8/8.1/10 in UEFI Boot Mode. You only need to turn Secure Boot off to install Windows 7.

You do not need to change the boot order of drives in your UEFI firmware (BIOS) settings.
- Connect your Windows 7/8/8.1/10 USB flash drive (Note: FAT32 file system) or insert your Windows 7/8/8.1/10 DVD.
- Restart the computer.
- Press the correct key to enter the boot menu (see this link for help). Or, if you have a Lenovo computer, you can also press the NOVO button when the computer is turned off and then select "Boot Menu"
- Select to boot from the "UEFI: USB/DVD device name".

On the Which type of installation do you want? screen, select the "Custom: Install Windows only (advanced)" option.

On the Where do you want to install Windows? screen, you'll need to delete all of the partitions (see screenshot below). Select a partition and click on the "Delete" option for each partition.



Once you have deleted all of the partitions, you only see Drive 0 Unallocated Space (see screenshot below).

Click on the "Next&q... Read more

20 more replies
Relevance 67.65%

Hi,

I have an ASUS which came with 8.1 OEM. I upgraded to Win 10 and now am about to do a fresh install of Win 10 (using this tool: Windows 10) on it.

It has 2 recovery partitions 20 GB and 500 MB.

Q1. During fresh install, do I need to delete both recovery partitions?

Q2. Just to confirm, recovery partitions only keep the newly installed OS backup right? I.e. wondering if I can keep older OS recovery on that?

Thanks

Answer:Fresh Install Windows 10 - Recovery Partition

Originally Posted by crazyfool


I have an ASUS which came with 8.1 OEM. I upgraded to Win 10 and now am about to do a fresh install of Win 10 (using this tool: Windows 10) on it.



How to clean install Windows 7/8/8.1/10 64-bit in UEFI Boot Mode.

If you want to do a complete clean install and if you have backed up your important files.

Normally, you do not need to turn Secure Boot off to install Windows 8/8.1/10 in UEFI Boot Mode. You only need to turn Secure Boot off to install Windows 7.

You do not need to change the boot order of drives in your UEFI firmware (BIOS) settings.
- Connect your Windows 7/8/8.1/10 USB flash drive (Note: FAT32 file system) or insert your Windows 7/8/8.1/10 DVD.
- Restart the computer.
- Press the correct key to enter the boot menu (see this link for help). Or, if you have a Lenovo computer, you can also press the NOVO button when the computer is turned off and then select "Boot Menu"
- Select to boot from the "UEFI: USB/DVD device name".

On the Which type of installation do you want? screen, select the "Custom: Install Windows only (advanced)" option.

On the Where do you want to install Windows? screen, you'll need to delete all of the partitions (see screenshot below). Select a partition and click on the "Delete" option for each partition.



Once you have deleted all of the partitions, you only see Drive 0 Unallocated Space (see screenshot below).

Clic... Read more

10 more replies
Relevance 67.65%

Hello, I had to reinstall windows 7 on my lenvovo u460 laptop, the install all went fine and it completely works. The only problem is i want to create recovery disks for my laptop, the one key recovery sofeware that i download right from levovo wedsite isnt working, when I try to create the disks it says " The program cannot find the service partition. This function is currently unavaible." Is there a way to reinstall the recovery partiton? what can i do? it dosent look like i can buy recovery disks so im lost. Any help will be greatful. Thank you!

Answer:No recovery partition after fresh install of win7

when you formated whole drive then you lost every partition :/ thats why you shall only formate C partition with windows on it and leave rest of partitions as they are since that will keep the one key recovery partition intact so you can restore backups

7 more replies
Relevance 67.65%

Well I finished my project - the program script allows me to create MBR and GPT hard drive partitions with a recovery image partition. The script also allows me to install 3 different versions of windows. and lastly it allows me to capture a recovery (push button reset) image. which can then be used to create recovery media..


Here is the Menu Snippet:
(A) CREATE A "BIOS_MBR TYPE" PARTITION STRUCTURE
(B) CREATE A "UEFI_GPT TYPE" PARTITION STRUCTURE
(C) CAPTURE AND CREATE A "BIOS_MBR TYPE" RECOVERY
(D) CAPTURE AND CREATE A "UEFI TYPE" RECOVERY
(I) INSTALL MICROSOFT WINDOWS FROM THIS USB DRIVE
(X) QUIT THIS PROGRAM

WinPE 5.1 was the preinstallation environment use for testing

Answer:Create a Recovery Partition and Recovery Image

Good one! I always have to go back and look up the procedure and commands when doing this. Really a help for an old brain.

3 more replies
Relevance 66.83%

Hey, last year I purchased a Dell Mini 9 which had Windows XP pre-installed on it. Somehow a few weeks ago it managed to wipe itself of the OS. Using another computer which has an optical drive I made a bootable USB device with the XP reinstallation CD which came with my netbook and the WinToFlash application which I downloaded from CNET.

I got my BIOS to boot from the USB drive, I got to a stage of the installation where it asked me to either choose a pre-existinf partition to install XP to or create a new partition to install XP to. I had no pre-existing partition tro which I could install to so I tried making a new partition. It asked me to choose a size for the new partition (which I did) and i then press enter. I was returned to the previous screen however the new partition had not been created. I then tried making a smaller partition, the same thing happened. Can anyone here please help me with this issue? All assistance (successful or unsuccessful) would be greatly appreciated
 

Answer:unable to create new partition for installation

... it managed to wipe itself of the OS.Click to expand...


I had no pre-existing partition ...Click to expand...


... however the new partition had not been created.Click to expand...

Suggestive of a seriously defective hard drive.

Can you get into the BIOS (Setup)? If so, and if it is not one of the useless ones, see if it has any hard drive diagnostics.

While I haven't tried the USB version, GParted is a pretty good partition editor, and should help you determine if the hard drive is salvageable.
 

1 more replies
Relevance 66.83%

I got Tecra R10-10W and I switched from Vista to XP. I used Windows XP Toshiba recovery disk for this.
I was not able to create partition on hdd during the installation.
I wonder did I miss something?

How can I split my hdd into 2 parts? Should I re-install XP for it?
Please help me?

Thanks,

Alper

Answer:Tecra R10-10W - Can't create partition during installation

If the Recovery Disc's menu didnt offer repartitioning options, then you will need to use a partitioning utility that can resize a partition that contains data.

I use Partition Magic and it works great, but its not free.
Another one is EASEUS Partition Master (The Home version is free).

2 more replies
Relevance 66.83%

Hi,

I have a question. How do I access a recovery Partition after a fresh install of Win7? I a fresh copy of Windows 7 from a DVD not using the recovery as I didn't want all HP utilities and stuff. But now when I press F11 it doesn't go to recovery or cant see any option there. Can see the recovery partition in Windows as I didn't touch it while installing a fresh copy.. Any Idea's please help..

Thank you..

Answer:How to access a recovery Partition on a HP after fresh Install of Win7

Naheed

Post a image of the Disk Management

Disk Management - Post a Screen Capture Image

2 more replies
Relevance 66.42%

i have a year old hp pavilion a6425n and it shipped with a 250 gb hdd witch i later upgraded to a 500 gb hdd and i lost my recovery option.. can i make a new recovery partition using my win7 disk so if i press F11 during boot it takes me to setup?

Answer:how do i create a 'recovery' partition?

Hello cammy,

Here is a tutorial that may apply to you from this very website, try it out: Recovery Partition - Create

Credits:
"Recovery Partition - Create" tutorial creator - severedsolo

8 more replies
Relevance 66.42%

hello

How could i create a recovery partition, so that i could reinstall windows xp?
And if anyone can give me extra info that would be real helpful.
thx in advance.
 

Answer:how to create a recovery partition?

It's a bad idea to make one. You have limited access to the partition, and it is useless if the drive fails. Just use your original CD or make an image of the drive on an external.
 

1 more replies
Relevance 66.42%

Hello All,
I have seen this thread: request: HP Recovery partition/dvd of Windows 7. I want to make a recovery partition on a clean install of windows 7. This is what I did:
1. Download HP Recovery Manager for Windows Vista
2. Install it.
3. Go to C:\Windows\SMINST\RAMDSK\Windows\SYSTEM32
4. Run Shrink.exe

Before when I ran it it said it couldn't create a recovery partition. To run it asks me to click next when it says "This installer will create a recovery partition and an initial restore point" and I did. But now when I run it as administrator it says its verifying the file system and it says it is preparing the harddrive for recovery partition creation and gives me an error : "Resizing of the windows partition failed or the disk is not recognized!The recovery partition cannot be created.you may try to delete files i the Windows partition, defragment the drive and/opr use a 3rd party tool to reduce the windows partition in size.". I tried everything.

On the screen it gives me the error it said it will restart the PC in a few seconds and it counts down and it shows click finish to restart. When I wait or click finish it just closes and does not restart my computer.

I reinstalled it lots of times.

In Shrink.exe.log it says this:

Code:
__________________________________________________________________________________________

Shrink.EXE - 4, 0, 2, 59 - Compiled on Feb 7 2007 14:08:38 - Executed on May 16 2012 19:26:18

UP is C:\... Read more

Answer:Create HP Recovery Partition

Why do you want a Recovery partition on the same HD, which can fail and lose the ability to recover.

A much better plan is to save a Win7 backup image externally so you can reimage with the Win7 boot CD/DVD in 20 minutes to the same or a replacement HD.

I would also consider with HP getting a far superior Clean Reinstall - Factory OEM Windows 7

1 more replies
Relevance 66.42%

Hi all,
I'v trying to create a recovery partition on my Windows 8.1 PC.
I followed the guide here: Restore Deleted Recovery Partition2
I've put install.wim onto my recovery drive (R:\WIN8\install.wim)
When using command prompt to point windows to the recovery drive using:
REAGENTC /SetOSImage /Path R:\Win8\install.wim /Index 1
I receive the message:
REAGENTC.EXE Operation Failed: 3
I've looked around for a solution and i can't find anything applicable.
Can anyone help?
Many thanks!
1]: [click here

Answer:Trying to create new recovery partition

I've put install.wim onto my recovery drive (R:\WIN8\install.wim)

you don't make a recovery drive - install.wim does that for you
Create a folder on our C drive - Win81-Recovery
copy install.wm into that folder
right-click the Windows Start screen button and select Command Prompt (Admin)
type in
REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1
press enter
now type REAGENTC /Info press enter

you should get operation successful
that's it

10 more replies
Relevance 66.42%

make recovery patition

Answer:how to create a recovery partition

type backup in the run box, open backup and restore center, and create an image, preferably on an external drive.i hate computers!but cant help myself....

2 more replies
Relevance 66.42%

please how can i create recovery partition again ??  

More replies
Relevance 66.42%

my sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled.By this hard disk partition ,i used to recover the whole windows to its factory condition by using F10 key.The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed .But now i have no recovery partition now.So please tell how to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space.So its of no use.Please tell how to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?????????????????

Answer:create recovery partition

You would like to remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with Windows 8?

You can remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with the Recovery DVD's.

For Windows 7.

How to make Sony Recovery Disks:
View Document
How to use Sony Recovery:
View Document

How to use Sony Hardware Diagostics:
View Document

How to order Sony Recovery disks:

1.Go to http://servicesales.sel.sony.com.
2.Enter your computer's model number (for example, PCV-XXXX), and click List Parts and accessories.
3.Follow the online instructions to order the Recovery Media Kit.
If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at 1-800-488-7669.

4 more replies
Relevance 66.42%

As I posted under different thread, my Windows 8 computer crashed a week ago.
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.

What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?

Answer:How to create recovery partition

Buy the factory recovery disks.

9 more replies
Relevance 66.42%

hi, Folks

i run windows 7 and wanna make a recovery partition hitting the F key on startup like toshiba's one. The toshiba recovery utility is no longer available. Who can help me to do it?

Thanks in advance

Answer:How to create a recovery partition?

Hello

1.) On Toshiba notebooks there is no recovery partition. They only have an image of factory settings stored on second partition in HDDrecovery folder. This recovery procedure can be started in advanced boot menu of Windows (F8) and if you select ?Repair my Computer?.

2.) It?s not possible to create such a partition and then you have to press only one single key to start this. I think it?s pretty complicated to create such a recovery partition.

3.) You can create your own image using a backup program like Acronis TrueImage. Save this backup on the second partition or external HDD. You can restore this image using the Acronis boot disk. It?s very easy and I do this on my notebook too.

7 more replies
Relevance 66.42%

I have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?

Answer:Create F10 Recovery Partition

I don't think you can create a partition that will do that by pressing f10, but you can create a system image of your system that is activated and will restore your PC to exactly the way it is when you create the image. You can burn it to DVD, a separate partition or a USB stick. This would be my suggestion to you. Get your computer exactly the way you want it with all your basic and primary apps installed and everything activated. Then make a system recovery image and a recovery disk. To do this go to Control Panel>System and Recovery>Backup and Restore and look on the left hand side of the Windows and you will see both options. Click create a system image and tell Windows where to save your image and it will make an exact copy of your partition. Then it will ask you to make a recovery disk. Follow the instructions on doing that and you will have a backup of your system at it's bare minimum.

9 more replies
Relevance 66.42%

I have a Flex 14 Ideapad having 25 GB of solid state disc as a different partition. Now I am thinking of creating a system recovery disc in this drive. However I do not see any option of choosing this drive in the dialogue for creating the receovery disc.Could you please guide me as to how to create the recovery disc / partition for Flex 14 laptop on another drive on the computer itself.Thank you in advance

Answer:Create a Recovery Partition

You have a number of misunderstandings going on here. Firstly, all Win8.1 installations have a hidden recovery partition on the boot drive. You need a separate recovery disk/usb stick in case you get to the point where you cannot boot from the main drive. Best approach is to make a recovery disk/stick and choose to copy the recovery partition too, but do not delete it from your PC when it offers.The recovery drive will be bootable (that's the point) so if you managed to get it on an internal partition you would have to make a dual boot configuration. This would be an odd way of doing things and against design. I recommend against such a strange approach.

5 more replies
Relevance 66.42%

Can anyone advise me how to create a recovery partition like those new HP computer? Thanks.

Answer:Create Recovery Partition

I found an article from PC MagazineMake a Recovery PartitionHope this is of some help

1 more replies
Relevance 66.42%

By mistake my little brother have formated the recovery partition.I am not able to refresh the PC through update&recovery option in PC settings...I have HP pavilion 15 notebook.windows 8.1 single language. Please guide me create the partition again.......











Solved!
View Solution.

Answer:How to create recovery partition??????

Hello, Thank you for posting in the HP Support forum. Welcome! I am afraid you cannot create recovery partitions if they are deleted. End users cannot do it. If the computer originally came with Windows preinstalled by HP (e.g. OEM Windows), then you can purchase recovery media from HP. They are usually cheap. You can use it to restore your computer to factory default condition. Here is how to do it:>> http://support.hp.com/us-en/document/bph07143>> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html And once you receive the recovery media [DVDs or USB pen drive], here is how to use it to restore back to factory/Windows default condition:>> http://support.hp.com/us-en/document/c03489643>> https://www.youtube.com/watch?v=PC3sUc3lr3E  If the computer originally did not come with Windows preinstalled, but you installed it on your own after that, then you need to use Windows installation media to reinstall Windows. You can get Windows installation ISO images from Microsoft web site and then burn it on a DVD >> https://www.microsoft.com/en-us/software-download/windows8>> http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/  Please, let me know if this helps and works for you. Don't hesitate to post back for follow-up questions.

8 more replies
Relevance 66.42%

Thank you for reading! Skip to the bold part below if this is TLDR. I've tried searching around for answers, but I'm afraid that I'm just not familiar enough with what I'm hoping to solve to even know if I'm searching in the right place. So again, thanks for your help in advance!

I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.

Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.

Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
... Read more

Answer:How do I create a recovery partition on a 2nd HDD

You can always create a System Image Backup on a second internal drive, as long as it is not part of the backup. You could also copy the current WindowsImageBackup folder to the internal drive for re-imaging the SSD.

The term "Image" may apply to many different type of files. For instance, a Windows 8 OEM system image may be a .wim file used to reset the system to factory conditions. The type of file would certainly determine what utility was necessary to recover that image.

A recovery drive will normally have the Factory image of Windows 8, unless you have replaced the install.wim with a new one. But all this does get confusing if the exact type of image being referred to is not known.

Be aware, when you create a Recovery Drive, the entire drive can be used for nothing else. That is why Flash drives are normally used.

9 more replies
Relevance 66.42%

I want to create a recovery partition on my windows xp desktop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 4 seconds . I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image. Im guessing id use ghost to make the backup. But if someone could help me.... I'll appreciate it. Thanks

Please mail me on [email protected]
Scorpionking

Answer:How to create recovery partition?

There are a couple of items you would have to do. First create a new partition, format it with FAT32 and make it bootable using DOS or The version that comes with Ghost. Create your image using Ghost or Acronis and save it there. You will have to install the imaging program on the partition as well put it in a folder called Ghost. Then you will need to create an AUTOEXEC.BAT file to load Ghost on start up saved in the same folder. I would make the parition bigger this way you can keep a few different images stored if you want. Finally you will need to alter you Boot.ini file. Create a copy and save it somewhere easy to remember first in case you make a mistake and need to restore the old one.

The boot.ini should look like this:

[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\Ghost="Recovery Partition"

You can change how long the wait in seconds is by altering the timeout value.

1 more replies
Relevance 66.42%

I am attempting to create a recovery partition. The instructions I have received to create the partition state to type fdisk from command prompt then choose option 1. However, when I type fdisk I receive the message it is not a recognized command. Any ideas? I got this from this site http://www.ehow.com/how_4841312_recovery-partition.htmlThis is another computer i have, here is it's spec's HP 864n Windows Xp Pro Sp3 Pentium 4 2.66ghz 1024 RAM

Answer:How to create a recovery partition

Why not, after installing, updating, etc. to where you want to create a recovery partition, why not just clone the HD? That way, if the original HD goes, you just pop in the 2nd one and you're back up and running. Just a thought.

10 more replies
Relevance 66.42%

I was wondering whether I could create a small partition on one of my HDDs and use the installation media creation tool to put the installation files on that and then set the BIOS to boot from that partition and start the process of installing Windows? I can't find my USB drive ATM.

More replies
Relevance 66.42%

I was wondering whether I could create a small partition on one of my HDDs and use the installation media creation tool to put the installation files on that and then set the BIOS to boot from that partition and start the process of installing Windows? I can't find my USB drive ATM.

Answer:Create installation media using small partition on HDD?

THX1138 said:

I was wondering whether I could create a small partition on one of my HDDs and use the installation media creation tool to put the installation files on that and then set the BIOS to boot from that partition and start the process of installing Windows? I can't find my USB drive ATM.



If you are using Windows 10 now(on the PC you want to do this to) and want to clean install, why not just use this option: Refresh Windows Tool - How to Use in Windows 10 - Windows 10 Forums ?

8 more replies
Relevance 66.01%

Hi, I would like to either do a clean install of Windows 10, or use the Fresh Start feature to get rid of all pre-installed software and start with a "clean" version of Windows 10. I would prefer Fresh Start if possible as it seems much simpler. I have two questions: how will I know which drivers I will have to reinstall, and also what happens with the Lenovo partition ( D: ), which I assume is the recovery partition? (I am new to Windows.) Thanks for your help!

More replies
Relevance 66.01%

Hey guys, just bought my wife a new S12 with XP Home Edition.  I normally like to reformat new computers to start fresh and get all the factory-loaded crap off there.  Can I do that on this computer but still leave the recovery partition intact?  I assume so, but I just want to make sure.  In other words, is there anything on the factory c: drive that the recovery partition depends on to work properly?  Or is the recovery partition completely independent? And if I do this, I assume I will access the recovery partition (if it's ever needed) during startup since it will no longer be available on the c: drive. Oh, and will this void the warranty?  I hope not! Thanks!

Answer:Starting with fresh install of XP but keeping OneKey recovery partition?

Hi, i prefer a complete backupwith free tools from easeus http://www.easeus.com/disk-copy/or acronis trueimage  ... on a second hdd.. for personal assurance ...  .. you can install all systems you like , starting from a scratch ...and void no warranty ...warranty only for hardware (all you can grab with your fingers i.e. S12   ... so delete software like  XP and you didnt make a backup.. or something is your personal prob... if you dont install a antivirus ... and get a malicious ... its your prob..   sincerely KalvinKlein

1 more replies
Relevance 66.01%

Hello everyone,
 
i have just bought my new windows 8.1 original dvd
 
i formatted my laptop (toshiba P70) and installed all the necessary add-ons and software... so i can say i have a perfectly new laptop :D
 
my question is the following: is there any free or low-price software i can download or buy online that allows me to make a complete recovery fresh and pure copy of my current windows so in case i got a tough virus or i needed one day to format again my pc, i only have to boot my recovery from a DVD or from a a small partition i reserved on my HDD?
 
Thank you  

Answer:Complete recovery software after a fresh windows installation

There is a built in Windows System Image feature, available from File History in the Control Panel.
The option will be at the bottom left, titled "System Image Backup".

2 more replies
Relevance 65.6%

My laptop came with windows 8.1 innitialy. I had upgraded my os to windows 10. Some days back I had to do " restore factory settings " on my pc due to some problems and my pc started with windows 8.1 again.  So, How should I creat recovery partition that would recover my pc back to windows 10 with out going back to windows 8.1. Plzz Help me ASAP.

More replies
Relevance 65.6%

I'm using Windows Vista and I'm trying to achieve this...

1) Copy my C: Drive partition to a DVD
2) Have that DVD be bootable and be able to recover the entire partition back into the partition.

I've got my Hard Drive partitioned into 4 parts
C: - OS
D: - Documents, Program Files, AppData (and other windows folders)
the other two are not relevant.

So basically if anything goes wrong with my OS I want to be able to throw the DVD in and boot to it, have it restore the C: partition.

So what software would I use to do this?
 

Answer:Create a bootable Partition recovery DVD

Acronis True Image will let you "image" your entire drive or partition to CD/DVD media and restore it at a later time. The backup set itself will not be bootable, but True Image will create a bootable CD version of itself that you can use to run True Image natively (meaning you boot from that CD, load the application, remove that CD and then put in the backup CDs/DVDs and do the restoration, or use True Image to create new backup sets).

There's nothing on the market today that will automagically create a bootable backup recovery set; the only one product that ever did that automagically was Powerquest Drive Image. It would put the actual application on the first CD (it didn't burn DVDs when it came out and disappeared before DVD burners/media even became popular) and you could use that backup set to restore.

The only difference with True Image is you need the TI recovery CD + your backup set, hardly a big problem. You can burn off multiple copies of the recovery CD as required, one for each set if necessary.

Good luck...

ps
It's possible to create a recovery set using Norton Ghost and then you can create a new CD and put the ghost.exe executable on the CD, but you'd still be required to do other steps to make that CD bootable in the first place so you could then access the ghost.exe file to run it. A bit more hassle than most people care to bother with, I believe. But it's possible... and you can use other imaging tools to do similar tas... Read more

6 more replies
Relevance 65.6%

Hi Guys,

So, I have a Toshiba Satelite L505-141 (from Greece) and my hard drive broke. Unfortunately, I have lost my recovery discs. I have changed my hard drive, I have installed the OS but I would like to have my computers as it was (with all crapwares ... Wink )

I found a guy with the same laptop and he can send the recovery disc. Actually, he already sent me the 2 disc (he sent me two copies of his CD online) that he created when he bought the laptop (through the Recovery media creator). Those discs though are not bootable and (I read) that you just use them and when you restart the system goes through the recovery wizard. Unfortunately, it didn't work for me (at least with the CD my friend sent me).

Do you know any way that I can do it? I mean to get from my friend a recovery disc? Can he create an ISO from his recovery partition?

Any suggestion is welcome!

Message was edited by: GeoKoro13

Answer:How to create bootable DVD/USB from Recovery Partition?

Hi

To be honest I don?t have experience with this stuff but i found very interesting document in Toshiba knowledge base - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Check it out.

7 more replies
Relevance 65.6%

I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. I am unable to locate a tutorial that can help me do this. Anyone know how I can do this?

Answer:Create custom recovery partition

Maybe this will help:
Refresh Windows 8 - Create and Use Custom Recovery Image

1 more replies
Relevance 65.6%

I've successfully created a Windows 7 Recovery partition as follows in the past, but when I try this with the Windows 10 Installation DVD or flash it says permission denied:
Windows 10: Create a System Installation Partition to install Windows (Installation Partition, not image)

1.) Boot From the Windows 10 Installation USB Flash drive and choose cmd from troubleshoot.

2.) Create a 16GB partition at the beginning of the hard drive, then partition the rest of the hard drive as you wish as follows:

Diskpart

select disk # (note:where # is the number of the partition in the output of the list disk command.)

Create Primary Size=X (where X is in megabyte hint: 16 GB is exactly 16384MB)

3.) Copy the entire USB Flash drive on to the 16 GB partition and make the partition bootable.

Open the command prompt and type this:

diskpart (note if not already in it)

list disk (note: disk number next to disk)

list volume

select volume # (note:where # is the number of the partition in the output of the list volume command.)

list partition

select partition # (note:where # is the number of the partition in the output of the list partition command.)

delete partition # (note:where # is the number of the partition in the output of the list partition command.)

select partition # (where # is the partition you want to format on the disk note the number beside partition in the list partition output.)

create partition primary size=16384

Active

FixPar... Read more

More replies
Relevance 65.6%

OK what I need to do is complicated. I have been searching for hours and cannot come up with a solution.
I have a computer with Windows 8 Pre-installed. It has a recover partition. I have disabled UEFI in the BIOS until I can finish installing Windows 7. I do not have any blank DVDs or access to a USB drive. What I want to do is delete the files in the Windows 8 recovery partition and put Windows 7 installer there. Then boot from that and replace Windows 8 with Windows 7. I have the drivers already downloaded to go onto the recovery partition. I have been unable to find any resources online to do this. I already Have a Windows 7 ISO ready to go.

Answer:How do I create Windows 7 Recovery Partition

How do I get over 100 views and no responses?

9 more replies
Relevance 65.6%

As most of us know, Acronis True Image can create a recovery partition, that is available while starting up a pc / laptop with F11 key. While it sounds like i great idea, there is one issue with this. It's price for Acronis.


So i've been thinking as well with using a google to find a similar software, that can do same thing. But my google skills aren't as good as i would like it to be.

Here i'm asking for your help guys. If you have found one please let me know. So far i've found this one

create a bootable recovery partition to restore a pc. like oem's F11

ANARETHOS RECOVERY TOOLS with MEDIA CREATOR


but ... well just want to know is that everything ? Or there is other software that can help me creating recovery partition.


Yes i do understand i will need space from my Hdd. Not sure what else could possible go wrong


Cheers in advance for your help

szametu


Ps. Please excuse my bad grammar english. Still learning.

Answer:What software can create recovery partition ?

I would just create an image - beats reinstalling.

3 more replies
Relevance 65.6%

I bought my z5070 with HDD in it now it is so slow, so i bought SSD, i want to create a recovery partition as the one that came with the basic HDD(the one that we use to restore from using OneKey Recovery), so how can i create it?? or at leat coping it. i tries with the acronis that came with the SSD but i always fail "not supported file system" or something llike that the acronis gives me

More replies
Relevance 65.6%

Hello,
Although this is my first post here, I am no stranger to this forum. So I have a blank hard drive which is for a notebook laptop with no DVD drive. I am planning to install windows 7 but I also do not have a 4GB () flash disk, at least not at the present.
So I though of creating a recovery partition. I am using windows 7 on my laptop and I have a SATA to USB cord. I have been creating partitions for some time now so I though it will be just the same process except that it is on another HD. Here is what I usually type on the console window.


Code:
diskpart
list disk
select disk X
list partition
select partition X
active
exit
X:\boot\bootsect.exe /nt60 X:
But when I was done with the process, transferred the HD to the notebook it did not boot into the set up process.
Although I don't know the problem, I suspect that the problem might be this last line :


Code:
X:\boot\bootsect.exe /nt60 X:
Please help if you can.

Thanks.

Answer:How to create a recovery partition for a blank HD

I think you are better off to make a USB recovery stick. Those sticks cost pennies.

Newegg.com - $0 - $10, usb stick

9 more replies
Relevance 65.6%

I want to create 2 partitions in my hdd but I have no idea how to do it. I have 80GB hard disk. I have recovery CD and I want to ask if anybody knows is this possible to do it by that recovery cd.

Thanks for any help!!!!!

Answer:How to create partition in Satellite 105 via recovery CD?

Hi nina,

Use the Expert Modus with the recovery CD.

You make a Partition with the recovery CD

- Choose ?Expert mode? pressing number two
- Click OK and press ENTER
- Choose LOCAL - DISK - FROM IMAGE
- Look in: must be selected to CD-ROM drive
In the middle window choose GHO file and press ENTER
- Using TAB button you must mark information about drive and so on and press ENTER
- Using TAB button mark again middle part of window (blue line) and with space bar activate ?New Size? box
- Put inside new partition size and press again ENTER button
- The question ?Proceed with disk load?? confirm with OK

or use the Partition Magic 8 this is a good and a simple Software for Partitions of the HDD.

I Hope this is a Help

By

2 more replies
Relevance 65.6%

In a fit of over zealous tidying up after installing Win 10 on my lappie, I deleted the 450MB Recovery Partition that the upgrade from Windows 7 created at the end of the main partition.

1) What was actually in that partition and why would I want it.

2) If I do want it, how to re-create it ...?

Thanks
Dave

Answer:Re-Create that 450MB Recovery Partition?

Recovery partition is where Windows stores the WinRe.wim which allows you to create a recovery disk or get into the recovery environment to repair/Trouble shoot/Restore/Reset/Refresh etc...

Now that you've deleted it. Those features won't be available and you won't be able to create a USB Recovery disk.

9 more replies
Relevance 65.6%

As with most new home computers these days, the manufacturer will include a bootable recovery partition on the hard drive instead of sending you a recovery CD.
I?m currently building a new system with windows 7, and after installing some of the most common applications I want to create a bootable recovery partition on the hard drive, as well as a bootable image on a CD.
The question is I?m not really sure how to do this?
I know of programs such as Norton ghost and Acronis, but I was looking for an easier solution, perhaps a free program?
Any help would be greatly appreciated.
Thanks,
Nick

Answer:How do I create a bootable recovery partition?

Hi -

The recovery partitions are found on pre-manufactured OEM systems. You can create a system inage on a partition, external drive, DVD, etc...

See "system image" - from Microsoft, Windows 7 Support -

http://windows.microsoft.com/en-us/w...a-system-image

http://windows.microsoft.com/en-us/w...ings-and-files

Regards. . .

jcgriff2

.

1 more replies
Relevance 65.6%

Hi there,

I am trying to update the OS running on my assembled desktop from Windows XP to Windows 7 x64. Unfortunately my DVD drive has gone kaput, so I am using a USB image to install. The HDD that I am trying to install Windows 7 on is an IDE. Before starting the installation, I disconnected the second HDD (SATA) because it seems to be a potential cause of a problem during installation.

I have already deleted the original XP partition along with a couple of others and created a new, merged partition for the OS for the unallocated space (around 35 GB). However, the installation does not proceed and I get an error message saying "Setup unable to create a new system partition or locate an existing....".

I have been searching for a solution to this all day and I believe the problem might be occurring because all the partitions existing on this IDE drive are logical (except a freak partition of 8 MB that I was forced to create while installing XP a couple of years back!). Perhaps I need to use a utility like DISKPART to manually create a primary partition.

The major issue is that since I already deleted the XP partition, there is no simple way that I can find to do this. I cannot use Partition Magic or any other software that has to be run from inside windows before restarting. I tried to circumvent this by booting via another USB drive on which a package called WliveUSB was installed, which allows me to run something called Bart PE. Somehow I cannot run DISKPART ... Read more

Answer:Solved: Windows 7 installation unable to create partition

GParted is pretty good. I've used it on a bootable CD, and there is a USB version. I think you want to mark the partition (on which Windows 7 will be installed) as Active (or "boot" or "system"; I forget which term GParted uses).
 

3 more replies
Relevance 65.6%

Hi guys,
I am using windows 7 ultimate 64-bit edition.When i tried to dual boot my system with Ubuntu, I accidentally formatted the hard-disk and when tried to re-install my windows 7 OS through USB drive I receive an error stating that windows cannot create a new partition or locate an existing partition. Please refer to log files. My CD drive is not working and I tried to manually part the hard-disk using Gparted and Diskpart but still it was of no use. Is there any solution for this problem?

Additional Information:
1.I have two hard disk installed on my system- both are seagate 1Tb sata disk
2.I have the windows 7 ulitmate iso file with me
3. I tried creating a bootable usb using unviersal usb installer and the windows usb download tool

I tried the load drivers option but the error given there is that there are no signed drivers. Tried manually downloading intel sata ahpi drivers but still no use

Answer:Windows 7 USB installation- setup was unable to create a new partition

Do have a UEFI/BIOS firmware?

To clean install:
1) Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation
than
2a) clean install with the OEM manufacturer's Recovery Disk.
2b) Clean Install Windows 7
2c) UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with


For USB:

x64
UEFI Bootable USB Flash Drive - Create in Windows

8 more replies
Relevance 65.6%

Hi

I have a Toshiba Satellite L300 notebook. I have formatted drive c and installed windows xp but soon I realized that I forgot to create a recovery disc.
Now the F8 function does not work but drive d and ?hddrecovery? folder which contains the recovery files of Toshiba still exists. 3.8 GB of data is available in this folder.

Is there any way to create a recovery disc now. Thanks already.

Answer:Can I create recovery DVD after WXP installation?

Hello

Recovery DVD can be created with special tool only. The name is ?Toshiba recovery creator?. This tool is part of Vista installation ? ?factory settings? only.

So now you cannot create recovery media and there is no way to start HDD recovery installation ? F8. I cannot understand why you have ignored Toshiba reminder about recovery DVD creation.
Anyway, you can order new copy under https://backupmedia.toshiba.eu/landing.aspx

Bye and good luck!

2 more replies
Relevance 65.19%

Good Morning to All, I am using Windows 10 Single language Home edition on Intel i5-4210U CPU @1.70GHz, 2.40GHz, with 4GB RAM and 1TB hard disk. I deleted my recovery disk by mistake. Now I want to create 2 more partitions, one for data and other for REcovery disk. How do I Do it. Also I want to create recovery disk. How do I do it and what should be my partition sizes. Thanks

More replies
Relevance 65.19%

Ok, here's what I want to do.

If I was to build a new pc from scratch and install windows 7 home premium, how would I go about creating a bootable hidden recovery partition on the hard drive, so I could reformat it back to these settings at any point if needed?

(like the proper manufacturers do themselves, normally loaded by pressing one of the F keys)

Thanks for your help.

Answer:Easiest way to create a hidden recovery partition?

Ah yes, my motherboard in particular lets you create one of those. Quite a useful feature, that I don't really use.

What you can do is store a partition containing a backup, and restore from that when the time is right, even though you will need a optical disk to begin the restore process using the backup program. You won't be able to get something like one of the F keys when your computer starts up like most manufacturers do, but you might be able to give it the option when choosing between boot choices when your computer starts.

How to create custom recovery partition - MSFN Forum


Quote:




You won't be able to get it to start by hitting F keys, but you can modify your boot loader to boot into a hidden recovery partition.

I've used grub for this in the past. Have a "System Recovery" option in the list and set the timer to 1 or 2 seconds. "System Recovery" boots into a scripted DOS or WINPE partition which has at least a couple of prompts to back out (incase you boot into it by accident) and eventually restores the system partition back to the original image.

I have used 3rd party tools to do the imaging myself, but you could easily use ImageX if using WinPE.

I've only used it for other people's computers, so I can easily instruct them on how to restore it back to a working image and saves me from having to look at the machine myself. Saves them playing around with boot options trying to boot from a CD/USB as well.



... Read more

2 more replies
Relevance 65.19%

Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?

I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...

would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...

Answer:create recovery partition with restore option with Fn key

Acronis True Image 2016 does this. You enable Startup Recovery Manager and you can hit F11 during the boot process to recover a disc image. Adds about 30 sec to boot process before it defaults to OS startup.

1 more replies
Relevance 65.19%

it says it all in the title really.

Can I create a restore cd from my HP partition using the Recovery Console? as I cant boot to desktop.

Chris
 

Answer:Can I create a restore cd from partition using Recovery Console?

8 more replies
Relevance 65.19%

I have been fixing PCs for friends and family for years, some of them are really good at screwing up an OS a only couple months after i install a fresh copy of xp or 7. i would like to be able to create a restore method simple for them to use to reset there machine back to my initial installed state. was thinking something similar to newer PCs F11 restore method or something i could add to a bootloader in 7 or xp making it a "dualboot" with just the OS and the recovery.

Answer:create a bootable recovery partition to restore a pc. like oem's F11

Since you'd be loading a backup image into a Primary partition created for this purpose, it can be reimaged using F8 System Recovery Options.

However this is not optimal because if you're making your own backup image then it can more easily be saved externally so it's also available in case of HD failure - or you can do both.

Backup Complete Computer - Create an Image Backup
System Image Recovery

2 more replies
Relevance 65.19%

Today I received 2nd hand X200 without any recovery disks. I reinstalled everything from scratch but I was just wondering is it possible to recreate hidden recovery partition for future recovery? It would be perfect if I would need to sell the laptop and make the customer happy. Anyone tried to do this?

More replies
Relevance 65.19%

Plz any one can help me.....
 
i have purchased laptop last week with following configurations:
Lenovo  G510 i5 2.5ghz with windows 8 and OneKey recovery feature.
 
 
My laptop was with windows 8 but i upgrade my hard drive 500 GB to 1 TB.
But now i am unable to recover my windows8 image by using OneKeyrecovery (novo).
So plz help me how to craete GPT partition style that will support for onekey recovery and recover Windows 8 image that is in my external hard drive.
Please send me the complete procedure to create GPT partition style supported for onekey recovery.Also solve the following questions plz.
1. How to create GPT partition style supported for onekey recovery?
2. Total Number of partitions and their actual sizes.
3. Size of C:
4. Size of D:
5. Size of recovery partition
6.Size of all partitions
 
Plz reply me at: ********@yahoo.com
 
 
Regards: Aamir
 
Moderator note: email address removed to keep away from the spambots.













Solved!

Go to Solution.

Answer:How to create GPT Partition for onekey recovery windows8

Dear Customer
 
Welcome in lenovo community
 
Please use the below link to download and install the Lenovo Recovery application so that you can do what you looking for 
 
Link : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035708
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 65.19%

I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.

Answer:Create Windows 8 USB from Recovery Partition files

Interesting, I have never tried that.

Can you post a screenie of the recov partition contents that you already copied to usb?

You might be able to make the stick bootable with grub.

5 more replies
Relevance 65.19%

Notice I said recovery partition on my hard drive-- not a recovery drive (e.g., on a USB flash drive)..
QUESTION:
If you upgraded to Windows 10 after your desktop arrived (with Win 8.1 factory installed), am I correct to assume the recovery partition you create after the Win 10 upgrade will unfortunately be for Windows 8.1? Ugh!!
The recovery partition I created is closer to 200 MB rather than a Windows 10 recovery partition which apparently consumes about 450 MB. (A Win 8.1 recovery partition is apparently about 200 MB.)
Your thoughts?
Footnote:
Assuming my conclusion is correct -- always a scary proposition at my age -- does anyone know of a recovery tool that will create either a Win 10 recovery partition or a Win 10 recovery USB flash drive from a desktop/laptop which has been u[graded to Windows 10 from the factory software install of Windows 8.1?
TIA
Michael T.
Software Engineer (retired)

Answer:Can I create a recovery partition for Windows 10 after I upgraded from Win 8.1?

When you upgrade Windows 8.1 to 10, Windows 10 will create a recovery partition if your system reserved partition (MBR disk) or Recovery Partition doesn't have enough disk space. As you know, Windows can only shrink a partition from the right side, so the 450 MB recovery partition is new created, which should not be deleted if you want to use recovery options. Windows 10 also allows you to create Windows 10 recovery disk use a USB drive. when you create a recovery usb disk, it will give you an option to delete the 450MB recovery partition.

1 more replies
Relevance 65.19%

Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?

I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...

would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...

Answer:create recovery partition with restore option with Fn key

Acronis True Image 2016 does this. You enable Startup Recovery Manager and you can hit F11 during the boot process to recover a disc image. Adds about 30 sec to boot process before it defaults to OS startup.

7 more replies
Relevance 65.19%

Yesterday i have upgraded my HP Envy 15-201TX Laptop from W8.1 to W10. As this is the genuine version of Windows which is only available for 1 Year so I wanted to have a Recovery Disk/Partition. So i deleted the old Recovery Partition(:D) which contained W8.1 given by HP and tried to create a Recovery Partition by myself using Windows Recovery Tool but i'm not able to do it, an error appears everytime i try do it "A Problem occurred while creating the Recovery Drive."
Steps are as follows: Control Panel > Recovery > Create a Recovery Drive
I have checked "Backup System Files to Recovery Drive".

More replies
Relevance 65.19%

In the old windows 7 pro, the recovery partition is missed

More replies
Relevance 65.19%

Hi,

I have a friends laptop (a Satellite Pro) which fails to boot into Vista (even in safe mode) with a blue screen. I have tried booting off my own Vista CD to attempt a windows repair, but even that results in the same blue screen. To cut a long story short, I want to resort back to factory default, but the recovery CDs were never created.

I can access the drive contents (both the C drive and the data partition) by booting off a linux live CD. Is there any way I can copy the files oft the data partition, and create a recovery CD/DVD using these file?

Many thanks

Answer:Can I create recovery CD from data partition manually?

> Is there any way I can copy the files oft the data partition, and create a recovery CD/DVD using these file?
No. You cannot do this. What you can do now is to order original recovery disc from Toshiba.
Sorry but there is nothing you can do about it.

2 more replies
Relevance 65.19%

Hi, the hdd on my ThinkPad T410 is Out of Order ( dead -- too much sectors are defective ), i decided to install a new one in my notebook as it is no more under warranty, how can i create the partition recovery by myself (as all thinkpad have in their factory configuration) on this new hdd to permit me to restore my notebook if any issue further occurs ? Thanks 

Answer:HDD to replace in my T410, how to create a partition recovery in the new one

Hi HonoRob and welcome to the forum!
 
ThinkPads also have an option to create recovery discs:-
 
Windows 7: http://support.lenovo.com/en_US/detail.page?&LegacyDocID=MIGR-74040Windows Vista/XP: http://support.lenovo.com/en_US/detail.page?&LegacyDocID=MIGR-68317
 
Contact support to buy them if you didn't do so before your HDD went dead.Hope this helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

1 more replies
Relevance 64.78%

Hi Guys Trying to install windows 7 Ultimate N (legit version) on a new clean Q180 via a USB stick. The stick has been prepped wihtthe MS tool, and managed to figure out a way around the "CD/DVD drivers" error message (switch USB ports), but when I get a few steps on to choose a partition to install to I get stuck again. The screen shows 3 partions - a partition called Lenovo (13GB), an empty unformatteed partion (~480GB) and a system partition (25GB) .  Sizess are from memory, so may be a bit out. When I choose to format the 480GB partition, it works (well, it thinks for a bit and then seems to complete), but when I go to hit next, it says it cannot create the partition.  Have tried several times backwards and forwards, and differerent partition sizes for the new partition, no joy....Any ideas? I have built 10s if not 100s of PCs before, but the last one was a few years back, at this point if this was a deskop I'd whip the drive out and format it on another machine, but want to avoid opening the 180 so soon!   Also, would like to think things have gotten easier, not harder since then!!!  Thanks in advance R

Answer:Q180 clean windows7 installation issue - Cannot create partition?

Hi
 
Welcome To Lenovo Community
 
Please try deleting the complete partion and then create fresh ones
If USB drive is not allowing you may try same using a Windows OS CD
Or you can create a fresh bootable USB for instillation  and try
 
 
How to Create a Bootable Windows 7 Installation USB Flash Drivehttp://www.sevenforums.com/tutorials/2432-usb-windows-7-installation-key-drive-create.htmlHow to Install Windows 7 from a USB Key http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_keyHow To: Install Windows 7/Vista From USB Drive [Detailed 100% Working Guide]http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/Use a USB Key to Install Windows 7 http://technet.microsoft.com/en-us/magazine/dd535816.aspx
 
 
 
 
http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/clean-install-of-windows...
 
 
Hope This Helps
Cheers!!!
 
 
 
_______________________________________________________________________________________________
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
 
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues id... Read more

3 more replies
Relevance 64.78%

Hi,

my Satellite L40 PSL48E came with a Vista recovery partition.
As I despise Vista I bought a replacement drive and installed a new hard-drive and installed XP pro.
I retained the original drive in case i ever had to claim under warranty.

I now find that due to work commitments I have to occsionally use the despised Vista rubbish and wonder if it is possible to create a Installation disk from the partition on the original drive so tha ti can create a dual boot system on my new drive.

I am very reluctant to BUY a new Vista CD since I already have a fully legal copy on a drive which I am not using and I will only use it VERY rarely for this one work commitment.

Any information gratefully received

Thanks Ron

Answer:Re: Satellite L40 PSL48E: Can I create a installation disk from Vista partition

Hmm?. If you have a HDD recovery option then a full image was placed on the HDD and usually all notebook with HDD recovery option supports an Toshiba tool called TOSHIBA Recovery Disc Creator.

Using this tool you could create a Vista recovery DVD If the Vista OS was damage you could also try to boot the notebook pressing the F8 button.
This would enable a advanced boot menu.
Here you should choose ?repair the computer?

But note; this possibility is only available on notebooks with ?HDD Recovery?

Cheers

5 more replies
Relevance 64.37%

Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs as recommended. Recovery Media Creator consistently fails on both Disc #1 and #2 with error messages during validation:

Failed to read E:\sources\boot.wim (Error Code 020150-20-00000000).

Have tried different DVD types without success. Anybody able to help?

Answer:Recovery Media Creator failing to create system recovery discs

Hello

Check please THIS thread and i hope you will find solution to this.

Good luck

4 more replies
Relevance 64.37%

I was using win 8 which was original came with notebook , then I installed win8.1(not upgrade from Store , just from .iso packet ).Because of some errors I re-installed another win8 . iso and now I can't download Recovery from SW Update .It says recovery partition doesn't exist.I was able to use that before.How can I re-create my recovery partition again?

Answer:Win8 Hidden Recovery Partition deleted.How do I re-create?

Have you made the OEM manufacturer's Recovery Disks?

   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD. (Windows 8 only)
Recovery Drive - Create with USB Flash Drive in Windows 8
System Repair Disc - Create in Windows 8 (Windows 8 only)




I would recommend you making the OEM manufacturer's Recovery DVD's or USB drive.
or
You can order the Microsoft official OEM Recovery disks from the OEM manufacturer's website.

7 more replies
Relevance 64.37%

HI,

MY LAPTOP IS SATELLITE L50C-14x.
It comes with windows 8.1.After start the laptop it says upgrade to windows 10. I Did it.
Now I want to create windows 10 recovery partition at my hard disk. It has a recovery partition of windows 8.1.

I want to delete it and create windows 10 recovery partition. What is the procedure ,will be to create recovery partition of windows 10 as like Toshiba create it.
thank you..!

More replies
Relevance 64.37%

Can I "Create a recovery drive" from the Control panel which will create an USB image and then use it to install windows on a bigger SSD? This will save me time to install a fresh Win and then download all the drivers again. Thanks.

More replies
Relevance 64.37%

Hello!

I've bought a new Toshiba Satellite L500-19E with Windows 7 Home Premium (64 bit). So far, everything's working brilliant.
I've already created the recovery dvds.
Therefore, could I now delete the partition with the recovery programm? I want to use the full space of my hdd and create partitions as I want.
But I don't know how I should do this?
Could you please help me?

greez

Answer:Satellite L500-19E - Deleting recovery partition and create new

If you are 100% sure the created recovery DVDs are ok you can remove all saved data on second partition.
Open Windows Explorer and on the left side where is second partition listed click with right mouse button on it and choose option FORMAT.
Choose Quick format option and click on START.

After minute or two all data will be gone.

Please note: in the future when you want to use recovery DVD for Win7 installation the whole HDD will be deleted and you will lose all your data.
Using recovery DVD you cannot format partition C only.

8 more replies
Relevance 64.37%

Hi all I need some urgent help, hopefully i can get some advice.

I accidentally used the cmd prompt and clean and created partition primary wrongly on the wrong disk. Can i know is there any way to recover the data inside? please help... this is what i did below...
Please advise me how do i get back my data and also label it as d drive.

I have downloaded active file recovery and i am currently running super scan on it.



DISKPART> clean

DiskPart succeeded in cleaning the disk.

DISKPART> create partition primary

DiskPart succeeded in creating the specified partition.

DISKPART> exit
__________________

Answer:Help! Disk clean and create partition primary recovery

Hope that Jumanji can step in here and help you.

I would NOT try to recover the files as a first choice.

I would think in terms of recovering the partition--rather than the files.

The best single tool is probably Partition Wizard. It would try to recover the partition, and if successful, your files may be intact.

Don't do anything that writes to the disc.

2 more replies