Computer Support Forum

Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Question: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source of the duration field problem. But after I had such a great success on this forum with my hard disk problem here, I decided to try to get help here.

Thanks in advance for any suggestions.

Relevance 100%
Preferred Solution: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 330.6%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 224.46%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

Answer:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Relevance 220.98%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 216.34%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

Answer:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Relevance 216.05%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

Answer:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Relevance 214.89%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 213.44%

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

More replies
Relevance 213.44%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 213.44%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

Answer:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Relevance 213.15%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 211.41%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 211.41%

MODS MOVE THIS TO THE RIGHT SECTION IF ITS IN THE WRONG?..thanks!

help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird....

i have no clue on what to do.. im stuck at a screen that says this





?..? said:



"Server Infomation"
"Select the type of incoming server you are using"
"[_??_] POP [_??_] IMAP"

"Enter the name of your incoming server (for example, "mail.example.net")."

"Incoming Server: [___????????????????___]"
______________________________________________________________________

"Uncheck this checkbox to store mail for this account in its own directory. that will make this account appear as a top-level acount."

"[_??_] Use Global Inbox (Store mail in Local Folders}"

"Enter the name of your outgoing server (SMTP)(for example, "smtp.example.net")."

"outgoing Server: [___????????????????___]"Click to expand...


 

Answer:help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird...

afaik hotmail does not provide pop\imap or smtp for free you may get it if you pay for the hotmail service but i would not recommend you do that just so you can get pop\imap or smtp

hrrm tbird and hotmail from the thunderbird faq
Can I access my Netscape WebMail or Hotmail accounts through Thunderbird?

No. Netscape WebMail and Hotmail use proprietary protocols. To access WebMail directly through an e-mail client requires you to use Netscape 6+ with AIM; to do so with Hotmail requires either Microsoft Outlook or Outlook Express. Of course, you can access your WebMail account on the Web at http://webmail.netscape.com/, or Hotmail at http://www.hotmail.com/.
 

8 more replies
Relevance 210.54%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

Answer:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Relevance 208.22%

"";"C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI";"Object is white-listed (critical/system file that should not be removed)"

There are a lot of other trojan horse walkthroughs, if someone can point in the right direction more specific to my horse droppings... :cry

Brand new computer... and AV wasnt the first thing to get downloaded... doh!
 

Answer:C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object is

Re: C:\Windows\System32\services.exe";"Trojan horse Dropper.Generic_c.MMI"";"Object i

Welcome to MajorGeeks, thernbear

Delete items using RogueKiller.

Double-click RogueKiller.exe to run. (Vista/7 right-click and select Run as Administrator)
When it opens, press the Scan button
Now press the Delete button.
When it is finished, there will be a log on your desktop called: RKreport[3].txt
Attach RKreport[3].txt to your next message. (How to attach)

__

- Rescan with HitmanPro, when it finds services.exe - Virus, allow it to Replace by clicking the down arrow next to the detection and choosing Replace.
If Desktop.ini - Trojan if detected again, you can allow HitmanPro to Delete this but Ignore any other detections from the time being.
Afterwards, click the Next button.
HitmanPro may want to reboot the PC in order for the changes to take affect, please do so.

__

Once you are back in Windows, run another scan with HitmanPro and then attach the latest hitmanpro.zip log. (How to attach)

__

Completely delete these two folders manually using Windows Explorer:
c:\windows\installer\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}
c:\users\#2\appdata\local\{0f7e99ff-f00f-32b4-d531-ecd74ed08177}

Let me know if you were successful or not.
 

3 more replies
Relevance 208.22%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 208.22%

Please help review my HijackThis File. My computer has problems with "Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups".

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:46:28 PM, on 10/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.
 

Answer:"Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups"

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to login to an infected user account, try using a different user... Read more

5 more replies
Relevance 208.22%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

Answer:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Relevance 208.22%

Windows 7 Home Premium

I would provide a screenshot (or three) however that is at the crux of my problem - I should perhaps say my current problem...now, with "7" (I am beginning to tire RAPIDLY of 7, much more quickly than I did with either XP, or Vista).

PROBLEM: When I attempt to "Save As" a document (Notepad, for instance), or even a Paint image, I get a window/page/screen/whatever, that has no "Buttons" ... no button to "Save", no button to "Cancel". Simply NO BUTTONS???

I had this problem the other night, and we "faked" or cheated our way through it, by using the Enter (Return?) Key to advance the cursor (cursor??) to where we wanted to be (well, we "hoped" we were "there", anyway, since we could not "see" what button or drop-down dialog box was selected or highlighted).

It's almost as if I had a "Resolution" problem, whereby the resolution is set too low (say, 800 x 600), things are too big to be seen/won't FIT on the page. However, my resolution is set to the "Recommended" 1366 x 768.

Please help...this Netbook would be a WHOLE LOT easier to throw against a wall than my desktops ever were . . .

Thanks in advance,
glenn . . .
PS, Hoping I was/am clear here...under the drop-down boxes of "File Name" and "Save as Type", there is nothing to select - not "Save" or "OK" or "Cancel" ... NOTHING????... Read more

Answer:No "Buttons" to "Save" or "Cancel" in Dialog Boxes WIN7

Hi,

Type dpi into the Search box and choose "Make text smaller or larger" at the top of the search result list. In the window that opens see what it is set to. You want it at 100% rather than 125% or 150%. So if higher than 100% change it back to 100%. Hit Apply. You will need to reboot. See if that helps.
 

5 more replies
Relevance 208.22%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

Answer:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Relevance 208.22%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Relevance 208.22%

Hi, my sister dropped off a gateway MT3432 laptop and when i turned it on, nothing works, It starts up but nothing shows on the screen. I hear the system booting up and spinning off the hard drive but cant get to the BIOS screen or nothing. I tried plugging in an external monitor and still nothing. I don't know what the deal is. Plz Help. I replaced the ram and the harddrive and still doing the same thing.

Answer:GATEWAY LAPTOP WONT BOOT """"HELP""""

Did your sister say she had did anything to the machine?  Played with registry? dropped it?

3 more replies
Relevance 208.22%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

Answer:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Relevance 205.32%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

Answer:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Relevance 205.32%

I have a problem that's driving me crazy and no idea how to begin to deal with it. Please forgive the length of this post. I just want to minimize going back and forth to provide details.

I am running Windows 7 Home Premium (legitimate license) on a 64-bit system. My laptop is an HP Pavilion G7-2022us.

For security, I run Microsoft Security Essentials, ThreatFire, Hitman Pro and WinPatrol in real-time mode (they have different functions and don't conflict with each other). My firewall is Windows native firewall. There are various other little monitors to prevent keylogging, webcam hijacking, etc. I have a variety of other file cleaning, anti-virus and malware software that is kept turned OFF (including processes) until I need to cycle through them one-by-one to do preventive maintenance (2 - 3X a year or whenever I'mexperiencing weird behavior or slowdowns).

I have an Orico USB3.0 powered hub in one port with six external hard drives attached (mostly WDs) and two charging phones. Another USB port holds a Logitech Nano Receiver. The third (and last) port is empty. Right now I access the internet through cable Ethernet.

I like to play with new programs and have a large number installed on my machine, but I haven't installed very much in at least a month, certainly nothing I have installed seemed to directly result in this strange behavior.
THE PROBLEM

I've had a problem for a while where explorer.exe crashes. When it reloads ? either on its ... Read more

Answer:Frequent Explorer.exe Crashing Then Opens "libraries" Or "my Documents" Windows [long]

I really need some help here. It's hard to believe no one has one bit of insight into this.

Since I first posted I repaired the file associations for pdf, exe and lnk files. The former was causing issues when I moved pdfs into folders, but was not the cause of the main crashing, nor did it fix it.
Now I'm running the Tweaking.com Windows repair. It's in hour 32 on a 1TB drive and is still on Step 5 (Repair WMI). I have no idea if I can interrupt it or if doing so will screw things up further.

In the meantime am using 6 year old Android tiny keyboard phone to get things done and falling behind severely on work I need to do.
 

2 more replies
Relevance 205.32%

I have been plagued for years by this bug (see attached Mad_Explorer_col.JPG screen dump), and this morning after visiting Tech Support Guy > Windows XP then searching for "Windows Explorer", on page 2 in "Solved: Explorer tree display curiosity, AKA Odd Windows Explorer Bug", page 2, I found the cause and solution brought by Mosaic1 Wed 07 Mar 2007 05:48 GMT:
Do you have the desktop toolbar on the taskbar?​and mrwes Tue 07 Aug 2007 18:34 GMT:
You can get around this by making the toolbar point to the Desktop but using c:\Documents and Settings > (Profile name) > Desktop. You don't see the My Computer and IE icons in the list, but everything else shows up...​Thanks a lot to Mosaic1 and mrwes!

Versailles, Sat 13 Feb 2010 10:34:25 +0100
 

More replies
Relevance 204.16%

While using "Windows Explorer" as an FTP client I have put the system into a state where any attempts to access an FTP folder from "Windows Explorer" produces the following dialog:
Dialog Title: "FTP Folder Error"
Dialog Icon: Information Icon
Dialog Text: "Windows cannot access this folder.  Make sure you typed the file name correctly and that you have permission to access the folder.  Details: No more Internet handles can be allocated"
Dialog Buttons: OK
I had used the "Add a network location" feature of "Windows Explorer" to add an FTP site.  The FTP folder appears under "Computer" in the left panel of "Windows Explorer." 
It is not mapped to a drive letter.  I then initiated a large FTP transfer operation by using drag-and-drop from the FTP folder to a local folder.  A portion of the transfer completed as expected but after some time it produced the "No more Internet
handles can be allocated" error.  When OK was clicked the transfer was terminated.  In this case I am using large to refer to many thousands of files and directories to be transferred as opposed to a small count of files having many bytes.
After the initial error dialog is cleared with the OK button and the transfer is terminated I can then reliably reproduce the dialog.  Any attempt to open an FTP network location
from "Windows Explorer" will produce a n... Read more

More replies
Relevance 204.16%

Hi all, this really wierd bug just happened and not sure what to do. My homepage is stuck at "http:///" and can't change it no matter what. The other problem is no matter what page I visit, there is no "windows internet explorer" in the title bar.I'm not sure if this is a virus or just a bug. I had IE 6 with this problem then upgraded to 7 hoping for this problem to disappear with no luck.Any help would be highly appreciated.Thank you

Answer:home page stuck at "http:///" and can't see "windows internet explorer" in bar

Will Firefox work OK?

1 more replies
Relevance 203.58%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

Answer:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Relevance 203.58%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

Answer:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Relevance 203.58%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

Answer:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Relevance 203.58%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

Answer:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Relevance 203.58%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

Answer:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Relevance 203.58%

Guys,

I am a little confused with regard to some of the mail options in Outlook Express. (I have version 6) What is the difference between the "Drafts" and "Outbox" folders?

Further how does the "Send Later" option work from the file menu? I always thought that "Send Later" was the same as using "Drafts" but what happend was that I was doing an e-mail, went to Drafts, or clicked on "Send Later" or Outbox and then after I clicked on "Send" doing a regular send, I checked my Sent folder and about 3 copies of the same message were delivered to the same person! (I only sent one message-not 3!)

What is the deal with the "Outbox" folder? Apparently that is not like the Drafts folder....correct?

What's the difference between doing a Save, Save As, and Send Later with regard to OE functions? If I want to save a message that isn't done yet, which of these 3 options should I use? (I.e, I want the message to go to the Drafts folder for example and stay there until I TELL OE to send it.) I think whatever I did above was that I modified my message and then click on where it just automatically sent next time I opened the message. A review of these features would be helpful!

Just for the record, I also use Yahoo Mail and find that so much easier!

Jack
 

Answer:Please Review OE "Send", "Drafts", and "Outbox" Options

Jack
To save an E-Mail to your Drafts folder for work on later then you use the File\Save option.
If you wish to save the E-Mail in another format such as .EML or .TXT or .HTM then you use the Save as function. You will also be required to specify a folder to save in or use its "My Documents" default.
Send later function if only one e-mail account exists will place the e-mail in the outbox and send it the next time you click on the send receive button. If you have multiple accounts then you can specify which account to send it from.

Dave
 

2 more replies
Relevance 203.58%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

Answer:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Relevance 203.58%

Hi
I have recently updated to the creator version
My files end up in unintended destinations. When I click in the documents tab in the sidebar of the documents screen, it takes me to a ?Documents? folder that appears in ?One Drive? group. Any files that I send from my desktop end up there
Those files are also shown when I open the first ?Documents? folder that appears in the ?Quick Access? group. I have similar problems with ?Pictures? folders
I have attached screen shots that I hope will explain. I want all my files of any description to end up in the ?Documents? folder contained in the ?This PC? group. Can anyone help please?
Incidentally, I don?t understand the purpose of ?One Drive?, and don?t believe that I will have a use for it. Can I remove/disable it?

More replies
Relevance 203.29%

"dependency chain" "windows 7" internet "windows explorer"

At the time of this writing, this search in Google will produce one result at best. Am I searching the wrong things? I have tried a couple handfuls of variants, and I am coming up with zilch.

Though I am fairly well versed in Windows 7 from working on other people's machines, I decided to stick with good old XP because of one issue above all else. When I instructed my firewall to block Windows Explorer from accessing the Internet it completely cut me off from the Internet, no ifs, ands or buts. My understanding of why this is happened leads me to believe the dependency chain for Internet access goes through Windows Explorer. I have long had a habit of blocking my File Manager of choice access to the Internet because... well, it's a file manager! Admittedly, my one experience with Windows 7 on my own machine was a retired student version of Server 2008 R2, but as soon as I found out that was the case, I decided not to make the move to Windows 7 and went back to my XP installation. I believe I was using Sunbelt Personal Firewall at the time. I now use PCTools Free Firewall.

Is this still the case with Windows 7? Is there a workaround if it is?

I haven't tried to recreate this on another person's machine.

+KronKyrios

Answer:"dependency chain" "windows 7" internet "windows explorer"

Hi KronKyrios, welcome to 7F!

I did find some very old information that may shed some light:
http://www.pctools.com/forum/showthread.php?17198-explorer.exe-(W98)&p=58079#post58079

"Launch Browser Windows in a Separate Process" Setting Is Not Available in Internet Explorer 5.01 or Internet Explorer 5.5

You can go into Services and check:
Windows Firewall/Internet Connection Sharing (ICS)
Network Connections
Remote Procedure Call (RPC)
Windows Management Instrumentation

R-click on each one, then Properties, then the Dependencies Tab.
You would have to cross check each one that is listed.

Here is a good list to help you: Black Viper’s Windows 7 Service Pack 1 Service Configurations

6 more replies
Relevance 203%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Relevance 202.13%

I have been playing the game for a few weeks now in my spare time on my Windows 10 desktop and have acquired some bonus packs, a dozen vehicles, upgrades, unlocked 5 seasons, and moved my user rank up to 4824 in the multiplayer ranks amongst various other things. I do not want to lose my progress but for the first time i wanted to upload a ghost the other day and seen that (it seems) I will lose all progress if I log into Facebook now. Also, I noticed that my "local account" doesn't transfer my save data when I log into the game on my Windows 10 laptop (which is super inconvenient because I am rarely home). I seen topics posted that a Facebook sync fixes this but I am afraid I will lose all my progress.
Anyone have any experience with this?

Answer:On Windows 10: "Asphalt 8 Airborne" can I sync my "local account" with my "Facebook Account?"

I am with you on this. I'm having the same problem, and the Customer Care form at Gameloft is not set-up yet for inquiries on desktop platforms. Also, search engines are hard to trigger relative informaiton on the subject. I have no intention of changing over to my Facebook "version" if the progress isn't going to be transferred.
It's just a new problem brought around to headline the Windows 10 updates. I'm sure there will be a wait time, but there has got to be a flood of new Win10 users that are firing up their CC services for a fix.
If I find out that it fixable, I'll get back to this thread.
Jerry

2 more replies
Relevance 201.84%

I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.

Answer:Power Option for "Turning off display" remains at "15 minutes"

That sounds like my problem - I leave the computer for an hour and it is shut down (I think sleep mode). I just need to hit the power button and it comes on to where it was when I left - but 2 of my USB devices are lost so I have to restart the computer anyway.

I changed all the power settings to NEVER. But his doesn't seem to make any difference......

0 more replies
Relevance 201.84%

I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.

Answer:Power Option for "Turning off display" remains at "15 minutes"

That sounds like my problem - I leave the computer for an hour and it is shut down (I think sleep mode). I just need to hit the power button and it comes on to where it was when I left - but 2 of my USB devices are lost so I have to restart the computer anyway.

I changed all the power settings to NEVER. But his doesn't seem to make any difference......

2 more replies
Relevance 201.26%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

Answer:"windows no disk" and "winsilly" "win956temp"

11 more replies
Relevance 199.81%

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

Answer:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

3 more replies
Relevance 198.65%

Hi all,

I have been searching the web for an answer to this question since first getting Windows 10 last year. I would like my File Explorer to open using the "List" view rather than the current default of "Details". I have seen many responses that reference how to change the default view template from Documents to Music, Pictures, ..., but none that actually address this question. Is there a way to do this at all in Win10?

I'm thinking of changing Documents template for Details to remove all columns except for Name. The Details view as it currently has been useful in the past so I hate to lose it all together.

Am I SOL in my request? Thanks in advance.

Answer:Want to change File Explorer default View from "Details" to "List"

Open File Explorer, in the menu bar click view > choose your view (mine is medium icons)

To get the menu bar (if you don't have it showing) put the cursor in the top window bar, right click, click Menu bar. On mine it's the first choice.

4 more replies
Relevance 198.65%

Does anybody know how I can change these icons?

I changed the default icon for the network one in HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C} but it didn't change.
Appreciate any help,

B

Answer:Changing "Computer" and "Network" icons in explorer navigation pane

Hello, and welcome to Seven Forums.

If you like, you could use the method in the tutorial below to change the icon of "Computer" and "Network" to what you like, and have it applied everywhere in Windows.

Desktop Icons - Change or Restore Default Icon

3 more replies
Relevance 198.65%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

Answer:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Relevance 198.65%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Relevance 198.65%

About one month ago, a new problem surfaced:

Most times when I try to "Save As" a document and the application calls Windows Explorer for me to Browse where to save the file, it hangs for upwards of 60 seconds. The Browse window appears, but then I get a "spinning circular cursor" for 45-60 seconds until I can do anything. This occurs in all applications from MSExcel through Internet Explorer.

The system never completely crashes, but there is always this 60 second lag now.

The lag also occurs when I try to open a document...and to a less extent, but sometimes, when I simply open Windows Explorer (Windows Explorer is inconsistent as to whether it will give me a lag...sometimes it does work fine).

I have previously tried posting in the malware forum. I had picked something up they found...and cleaned it out, but that seems to have been completely unrelated to this as it was a virus redirecting my Google searches.

Can anyone help?
 

More replies
Relevance 198.65%

Today I tried to burn a disk of mp3 files as I've done many times before. When I tried to copy the files from the C drive to the D (CD/DVD drive), Windows Explorer only would allow "Move," not "Copy". I tried to copy with CTRL+Right Click and that didn't work either - when I hover over the icon for the D drive it says "Move."

I was able to copy and burn a disk (in CD format) with Windows Media Player, and the CD drive works fine for playback. Also, when I plug in an external hard drive Windows Explorer allows copy of files to the external hard drive.

It's only when I try to copy files to the CD drive that I encounter this problem.

No other recent changes have been made to the computer.

Any idea, and thanks very much!

Answer:Windows Explorer only allows "Move", not "Copy" to CD/DVD drive

try selecting the files--then right click and select 'SEND TO' CD/DVD--it shouldn't be possible to 'copy' to a blank CD/DVD as it will be unformatted.

'send to' the choose burn

4 more replies
Relevance 198.65%

Looking for some help. My wife's toshiba satellite laptop takes forever searching when you try to access My Computer or Windows Explorer. This happens from the desktop icon or thru the start menu. It seems to be searching for something that isn't there.

She is running XP Home OEM edition. Version 2002. computer has Celeron M processor 1.2 GB of ram. Being used for surfing, digital camera picture downloading, itunes, MS Office stuff. there is alot of Toshiba stuff in the add/delete list. not sure what is necessary and what isn't.

Thanks.

PS checked MS database. it said to go into Adminstrator services and stop WIA. I checked this and it is already stopped on this computer.
 

More replies
Relevance 197.49%

Hi all
Previously the  "Save Picture"  box would put a web generated title in the box and automatically selected JPEG.  Now the title box reads "untitled" and the only file options offered are "png" & "bmp" 

Please note that a similar post has appeared, but the solution did not match the fault.  I'm seeking to restore the automatic response to save picture, that might have been upset by antivirus clean-up programme.

Thank youin advance for considering my problem

More replies
Relevance 196.62%

My problem started 08/21/07 and I've been hoping someone could look at this. I apparently caught a Trojan and can't get rid of it.

This trojan has screwed up my explorer file. I'm unable to get a display of my DeskTop (blue screen only). Reduced to using TaskMgr to run iexplore to access internet and navigate. Ran explorer and received the following error:

explorer.exe - Entry Point Not Found

(X) The procedure entry point PrintWindow cound not be located in the dynamic link library USER32.dll.

[OK] Click to expand...

I can muddle around with TaskMgr, but I no longer have my display for desktop or menu bar (i.e., Start and such).

Had a security 'expert' instruct me to rename my USER32.DLL to USER32.OLD which hosed my computer (could not boot up). Had to find my OS disk to get back in and rename the file back so I can get back to where I was.
Here is my HiJackThis log:
-----------------------------
Logfile of HijackThis v1.99.1
Scan saved at 1:09:55 AM, on 9/11/2007
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Cox\Applications\app\SysSvcNt.exe
C:\Program Files\Common Files\Authentium\AntiVirus\dvpapi.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINNT\... Read more

More replies
Relevance 196.62%

Had posted this 08/21/07. No Reposes at all. So I'm going to try here.
http://forums.techguy.org/windows-nt-2000-xp/612963-w2k-explorer-exe-entry-point.html

Was working fine, then something went wrong. COX Secuity Suite blurped it caught a Trojan (didn't catch name). It had blocked it, but couldn't remove it. Explorer will no longer load.

ERROR MESSAGE:
Explorer.exe - Entry Point Not Found
(X) The procedure entry point PrintWindow could not be lcoated in the dynamic link library USER32.dll.
[OK]Click to expand...

I looked in the subdir and found explorer.exe was gone. I pulled a copy of explorer.exe from the old C: (now D, but I get the same error message.

I can muddle around with TaskMgr, but I no longer have my display for desktop or menu bar (i.e., Start and such).

This is my most current HiJackThis Log:
Logfile of HijackThis v1.99.1
Scan saved at 11:32:13 PM, on 9/18/2007
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Cox\Applications\app\SysSvcNt.exe
C:\Program Files\Common Files\Authentium\AntiVirus\dvpapi.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINNT\system32\nvsvc32.exe
C:\PROGRA~1\Dantz\RETROS~1\wdsvc.exe
C:\WINNT\system32\MSTask.exe
C:\WINNT\System3... Read more

Answer:W2K: "ljjjjij.dll" causing "Explorer.exe - Entry Point Not Found"

9 more replies
Relevance 196.62%

So, there's a location in File Explorer on Windows 10 you can go to called "Network." In this place, you can go to your router properties, and change some settings. Originally, a "General" tab was appearing in these router properties, and you could change some "settings" by clicking a button on that tab, and basically with the settings window that would appear, you could map ports/port forward. However, for some reason, (and I don't know what I did...) this "General" tab is no longer appearing in router properties. All I think I did was open up router properties and close it once, and i don't know, it's just gone, all I see is some router info in a "Network Device" tab.

The general tab normally looked like this: https://youtu.be/Resk2OtX_qs?t=41

So, what can I do to get this general tab back? I don't understand why it's gone.

Answer:No "General" tab in router properties in File Explorer's "Network"

You do not get your router properties in the Network devices that show up in Explorer. It is just Windows pulling UPNP info for you to be able to click on the Icon and open up the browser, so that you can log into the device. Not all network devices can be accessed when shown in Explorer.

There is nothing wrong with Windows. If you want to go to a Network share, then you need to map it.

3 more replies
Relevance 196.62%

Every time i try to download a file i get a box saying "Explorer cannot open site "x" the site may be busy pls try again later..... this happens EVERY TIME i can't download anything.... can't open attachments on emails..... hellllllllp!!!!! what have i done!!!!
 

Answer:every time i download i get error " explorer cannot open site "x"......."

7 more replies
Relevance 196.62%

My computer is a DELL Dimension 8200.  My OS is Windows XP,  Home Edition.  My ISP is PeoplePC and I use a dial-up connection.I am experiencing the following described problems with "Outlook Express" and with "Internet Explorer:"Outlook Express:When I attempt to use "Insert Picture" into the body of a new message by left clicking on the small box like icon, which contains mountains a rather large blank screen appears that has a blue border, white/blank interior, small red box with a white cross at the upper right corner (cancel facility) and the Internet Explorer icon (blue "e" with a gold band)  at the upper left corner.  There nothing about such screen that is functional and I remove it by left clicking on the red box with the white "x."  As a consequence of these circumstances, I am unable to insert / embed a picture within e-mails that I prepare to be sent.Internet Explorer:At the "Internet Explorer" screen when I left click on the "Tools" button and then on the "Internet Options" button that appears in the drop down menu only a small screen that very, very quickly flashes and goes away appears.  Consequently, I am unable to access / use those items contained in the "Internet Options" facility.When my home page is booting up after I have connected to the internet, a script error screen appears that includes this, "res//ieframe.dll/navcancl.htm&... Read more

Answer:Multiple Problems With Both "Internet Explorer" and "Outlook Express"

.... dialup.... you have my sympathy.  Do you have SP2 (Service Pack 2) for Windows XP installed?  What protections are you using against viruses and spyware?Have you been able insert pictures in the past?  I gather you're getting a glimpse of this panel for inserting a picture but it's faulty:Is that the panel you're referring to?

5 more replies
Relevance 196.62%

So, there's a location in File Explorer on Windows 10 you can go to called "Network." In this place, you can go to your router properties, and change some settings. Originally, a "General" tab was appearing in these router properties, and you could change some "settings" by clicking a button on that tab, and basically with the settings window that would appear, you could map ports/port forward. However, for some reason, (and I don't know what I did...) this "General" tab is no longer appearing in router properties. All I think I did was open up router properties and close it once, and i don't know, it's just gone, all I see is some router info in a "Network Device" tab.

The general tab normally looked like this: https://youtu.be/Resk2OtX_qs?t=41

So, what can I do to get this general tab back? I don't understand why it's gone.

More replies
Relevance 196.62%

Recently after updating Windows 10 to Fall Creators Update (1709) (I think this started to happen after clicking the "forgot password" button on the sign in screen, just a theory), all messages on the shutdown/boot screen in Windows (for example "Shutting down", "Restarting", "Welcome", ...) became replaced with "Just a moment". It isn't a huge inconvenience, but "Working with updates" also got replaced by it, so I don't know if the computer is installing updates or is stuck at shutting down for example if it takes a long time.
I don't expect anyone to have a solution, I'm just wondering if someone else has this problem. SFC and DISM didn't help me, changing the system language did not help.
 

More replies
Relevance 196.62%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Relevance 196.62%

Hey everyone,

Unfortunately, my computer has been infected with a particularly virulent, or relatively new, virus (for which I am currently awaiting help on the Malware removal sub-forum). I wanted to ask, though, if anyone else has had to deal with this particular Trojan before because, from what I have been able to find out, it (i.e. Trojan_Win32.Generic, or "TidyNetwork.com") doesn't seem to have a remedy as of yet. I've checked just about every virus database I could and have come up empty handed every time. What's more, I've downloaded and ran half a dozen different top-shelf Anti-virus' scans and removal programs, only to end up disappointed.

Does anyone know what the deal with this thing is?

Best,

John
 

Answer:"Trojan_Win32.Generic" a.k.a. "TidyNetwork.com" & "Strongvault"

Please do not start another thread for the same issue.

I'm sure someone will be along to help you in your other thread soon.

Closing duplicate.
 

1 more replies
Relevance 196.62%

One of our Win10 laptops has a context menu with "Properties" that uses shortcut key "r". The other uses key "o" which conflicts with "open". I have no idea how it got corrupted. Suggested locations in the registry for context menu doesn't list it. Software tools work on old windows or only delete/disable context menu items.
How can I fix this?

Answer:Context menu "Properties" uses "o" shortcut instead of "r"

I have no idea if this will work but the following tutorial has often helped me fix corrupted file & folder associations. Use option 2 for a few specific cases like Drive and Folder.

Default File Type Associations - Restore in Windows 10

2 more replies
Relevance 196.62%

Windows XP SP3
WMP 11

When I open a media folder & select Play All on the Explorer left pane I get the "Copy to" selection window and then the "Move to" window. When I cancel these the files load into WMP 11.

Anyway to get rid of the "Copy to" & "Move to" commands, so that it just loads the media files in WMP 11?
 

More replies
Relevance 196.62%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

Answer:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Relevance 196.62%

How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John

Answer:Change font of "Welcome", "Logging Off" and "Shutting down"?

  
Quote: Originally Posted by RBCC


How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John


I am not sure you can change the fonts though if you wish you can change the text from "Shutting Down" to "Bye Bye" or so, by editing, winlogon.exe.mui.

3 more replies
Relevance 196.62%

Hi - I have a thinkpad x61t. When it's in the docking station, whenever I press "shift" "alt" or "ctrl" a little pop up window tells me that key is being pressed. The laptop does not do this when it's out of the docking station. I've looked all over the control panel in vista and can't find any setting.

Any ideas how to switch it off? Driving me nuts! Thanks.
 

Answer:"shift", "alt", "ctrl" appear onscreen when pressed (see pic)

You mentioned that you have looked in the Control Panel so this may be something you tried already:

Control Panel - Ease of Access Center - Make the keyboard eaiser use - uncheck 'Turn on sticky keys'.
 

2 more replies
Relevance 196.62%

OK...
I'm looking for some help getting rid of theses creeps!
I have tried several programs including Spybot, Spyblaster, Lavasoft, Mcafee, etc. etc. with no luck.
I'm new to HijackThis but here we go..... ]

Logfile of HijackThis v1.97.7
Scan saved at 11:59:09 AM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)SIZE=5]

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
G:\HijackThis.exe
G:\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Mi... Read more

Answer:(I'm new here) help w/ "xads", "xlime", "Context3.kanoodle"

hi pdx

please download the new hijackthis from here
http://www.majorgeeks.com/download3155.html


and install it in it s own folder like this :

C:\hjtantivirus\hijackthis.exe

scan again with the new hjt and post a new log .

1 more replies
Relevance 196.62%

Hardware: Toshiba Satellite P105-S6177 System: Vista Home PremiumMemory: 2GB RAM, 120GB DriveProcessor: Centrino Duo 1.73GHzChip Set: Intel 945GM ExpressFurther Explanation:User Choice:      System ActionShut Down      RebootHibernate         RebootSleep         Sleeps... but won't come out of SleepFurther Explanation and Attempts:Using the Toshiba Power Management feature does change choices of action but the outcome is the same as choices from Vista menu. For instance, if I choose to have the system Hibernate when the lid is closed, the system goes into hibernation momentarily then restarts, or if I press the power button, the system shuts down then immediately restarts.I can use the command line: ?rundll32.exe powrprof.dll,SetSuspendState? and the system will go into hibernation but then immediately restarts.The only way to turn-off this computer is to hold the power button for 5 seconds or more and then when powering-up again, I get the nasty Microsoft warning that the system didn't shut down properly last time and do I want to start in safe mode or normal, etc, etc with all it's slow checks with this type of startup.The Sordid Story:I just purchased this Toshiba Satellite P105-S6177 from RefurbDepot. I know, that's my first problem. Secondly, they did not include a manual or recovery disks. When calling ... Read more

More replies
Relevance 195.46%

Need the aforementioned drivers.  I have installed virtually every driver available in the Driver download page inc Control Vault and cannot get the two driver mentioned.

Any help would be appriciated 

Answer:Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass Storage Controller" Windows 7 64 Bit

Check under Security for the Broadcom Unified Security Hub (USH - probably a print/biometric reader) for the device that best matches your hardware:
www.dell.com/.../latitude-e6520
The other "mass storage controller" ... go to Device Manager, right-click the device in question, Properties, Details tab, change dropdown to Hardware Ids and give me the the VEN and DEV ID's (do the same for the above USH device if the driver linked does not work).  

13 more replies
Relevance 195.46%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

Answer:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Relevance 194.88%

I'm running windows 7 on a 1 year old PC, and use windows live mail as my mail program of choice. oddly enough, WLM sometimes eats my emails, only showing a portion of them. this is NOT the issue where images are hidden: more often than not, it's the text or body of the email. and they can be from any number of sources; personal emails from regular contacts, or even the generic group messages, like from twitter and facebook.



that's how they look, whether i view them inside the program or double click on them to have their own window. however, the emails come through fine via webmail or my phone, just not in WLM, where the text is hidden.

any ideas...?

if it helps trigger any ideas, this seems to happen to specific addresses (like, all twitter emails, or all emails from my friend karl) instead of just every email.
 

Answer:windows live mail "eats" my emails (not the "hidden images" issue)

bump worthy..?
 

1 more replies
Relevance 194.88%

seems good but warning: i clicked on "Java" in "Final Tests" tab and had my portable firefox both updated automatically and changed from 32bit to 64bit app. uggh, really pisses me off. It's probably Mozilla's fault, or mine. Guess I was expecting something more simple and refined, like atmzzrSystemCheck, awesome little gem.

If anybody understands how i could have avoided that, I'm all ears and greatful. Or if you know of other autotraps in Windows Repair Toolbox. [..good thing my username is sixthumbsam since I registered to post this as a comment on this app's download page but couldn't figure out how to do that without registering for one of them other services..dixcus, goodle, facedoink, etc.]

Many thanks to the MajorGeeks for existing all these years!!
 

More replies
Relevance 194.88%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Answer:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Relevance 194.88%

Hi all

Ill cut to the chase.

What I am asking is someway of turning the Entire Windows Desktop/Screen "Black and White" not simply High Contrast.

I am one of those unfortunate ones, like many, that suffer from quite severe migraines from time to time. Couple this with frequent headaches, sometimes daily. This obviously isnt helped by the fact that my hobby and career are both in IT. I have tried every possible solution to alleviate the headaches. Lay off certain foods, make sure to have a balanced diet. Turn off any strong lighting around my computer screen, remove any strong colours from the desktop etc......

Windows XP / Vista have tried to address this issue with the accessibility wizard, where you can select the High Contrast Options to take any strong colours off the screen. Unfortunately this still doesnt get rid of everything.

When you make any major changes or "logoff" in XP/Vista, the screen fades to "black and white" for a short period. If you know what I am on about, thats the effect I am after.

More than likely a black and white layer is laid over the desktop to create this effect, unfortunately you would not be able to access anything underneath.

I need a fully functional XP machine in complete black and white.

On old CRT monitors you were able to remove the colour, making the screen B&W, but with alot of LCD screens this function is not available.

If anyone has any ideas, you would be helping so many people.

Any assist... Read more

Answer:Turning the Windows Desktop completely "Black and White" not just "High Contrast"

9 more replies
Relevance 194.88%

When trying to update with Windows update, i get a spontaneous reboot or a bluescreen-crash.
The filename "lzx32.sys" is mentioned.

The updates i'm trying to install are the following (roughly translated from norwegian):
"Update for Windows Media Format 11 SDK for Windows XP (KB939399)"
"Windows Tool for removal of dangerous software - march 2007 (KB890830)"
Other than that, i believe i have all other windows-updates.

I do however recall there beeing a third update on the list when i started the installation for the first time.
After the third or forth spontanous restart/bluscreen, when i figured something was wrong, it has disappeared from the list.
I do not know if it actually got installed or not.

I've been following the 5-steps-before-posting as good as possible.
From my normal startup programs msn-messenger and daemon-tools were shutted down before the dss-scan.
Here are the three logs (panda-activescan, dss-main and dss-extra attached):
PS: note that the "extra.txt" is from the first scan, which was done abit earlier than my last scan where the pasted "main.txt" is from.
This is because i was unable to get a fresh "extra.txt" from the last scan (no minimized window at all).
OK, here we go now:

Incident Status Location ... Read more

Answer:Windows Update - spontaneous reboots/bluescreens "lzx32.sys" - "Exploit/ByteVerify"

BUMP

In addition I've done some work myself (Rustbfix.exe, SpywareGuard, SuperAntiSpyware Free Edition, AVG Anti-Spyware), and it seems to be cleaner than it was (i.e. Windows Update works).

It would be nice anyways to get the facts straight, so here's a fresh log from Deckards System Scanner:

Deckard's System Scanner v20070318.32
Run by Claw_ on 2007-03-22 at 14:16:44
Computer is in Normal Mode.
--------------------------------------------------------------------------------



-- HijackThis (run as Claw_.exe) -----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 14:17:16, on 22.03.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccProxy.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccSetMgr.exe
C:\Programfiler\Norton Internet Security\ISSVC.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SNDSrvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programfiler\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Programfiler\Grisoft\AVG Anti-S... Read more

5 more replies
Relevance 194.88%
Answer:"msvcr80.dll is missing from your computer." WindowsUpdate_00000643" "WindowsUpdate_dt000"

Hi,

Please share more information with us, when did you found this iussue? what action are you doing when you found this issue?
Plese first refer to this KB, does it fit this issue?
NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/976982/en-us
More information will be appreciate.
Regards
Yolanda
TechNet Community Support

5 more replies
Relevance 194.88%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

Answer:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Relevance 193.72%

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx
 

Answer:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread
http://forums.techguy.org/t76279/s5b1a29d68c715c9a36d25291025adddb.html
 

1 more replies
Relevance 193.72%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

Answer:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Relevance 193.72%

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

More replies
Relevance 193.72%

At first I completed the download and than waited for around 3 hours for "preparing for installation" and than when i again started the updating after the restart it is showing "checking for update" from past an hour.
What should i do?

Answer:Why does windows to update stuck at "checking for updates" and "preparing for installation" ?

The OS is probably missing some updates during the upgrade process. Be patient and let the process work on its own.

2 more replies
Relevance 193.72%

After a catastrophic computer failure, I managed to recover almost everything. However upon booting up I got the message "BOOTMGR is missing". I used the original Windows installation disk to do Startup Repair, which recovered BOOTMGR. However now every time I boot up I get a message from Windows Boot Manager asking me to choose between "Windows 7...(recovered)" and "Microsoft WIndows Recovery Console". How can I get the computer to boot straight into Windows 7?

More replies
Relevance 193.72%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

Answer:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Relevance 193.72%

Hello all,
I'm suffering froma troubling problem with a Windows 7 system.
This system has a boot HDD (C and data storage RAID5 array (D. The system locked up hard requiring a power down to get Windows operational gain.

The sytem is fine now, except the ~3 TB RAID5 array is not seen by W7. The W7 disk managment snap-in reports that the 2793.97 GB "drive" exists, but the status is "Unknown" and "not initialized". Needless to say, the drve was online and contained LOTS of data before the crash. Due to it's size, the drive was GPT.

I ran a synchronize on the RAID 5 array and that finished w/o error, so I assume the actuall array is fine.

Any recommendations for what utllity/diagnostic/etc. to try next?

Further info: The RAID 5 is a creation of the AMD SB750 "southbridge", which uses tech licensed by Promise Technology.
 

More replies
Relevance 193.72%

ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't last if you shut down. Next session, it still opens "blank"

Answer:ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't

Welcome to Seven Forums bobbot11. Help us understand. When you 1st open IE, it opens to a blank page instead of your home page? Or is opening new tabs that open a blank tab? Or is opening a new window that opens a blank window?

If IE is opening to a blank page instead of a home page you have set, try re-registering IE.

Download the IE Restorator, and choose Re-register 32 bit IE in (whichever version your OS is) W7

SF IE Restorator - Troubleshooting General Issues with IE

See if that helps. A Guy

1 more replies
Relevance 193.43%

Hello, nice peoples that provide so many fixes to make Windows suck less.

I've been looking for hours, but the terms are so general I can't find anything. When I open up Windows Explorer, the "Computer", my profile folder, and the Recycle Bin all appear under "Desktop". Which makes finding things a pain in the butt.

Is there any way to set those items as their own icons, outside of Desktop, and remove them from under Desktop? Basically, I want to see this:

-Computer
└C:\
└Folder
└Folder
└...
└D:\

-Desktop
└Folder
└...

-senselocke
└Downloads
└Favorites
└...

-Recycle Bin


I know you guys have found a ton of tweaks for Windows 7, but this one has bugged me for a while now. Has anyone found a way to get something sort of like that?

Answer:Move "Computer" and "[username]" out from under Desktop in Explorer?

Hello Senselocke,

You could use the tutorial below to add the User Folder (ex: senselocke) as a separate group in the navigation pane.User Folder - Add or Remove from Navigation Pane
You could use the tutorial below to add the Recycle Bin as a separate group in the navigation pane.Recycle Bin - Add or Remove from Navigation Pane
You might also see if unchecking the Show all folders option in the navigation pane may help get you closer.

Hope this helps some,
Shawn

3 more replies
Relevance 193.43%

Hello,
I got this problem today. Normally when right clicking on the "explorer" icon it shows shortcuts of folders that I added as well as frequently visited folders.
But now it shows nothing but two options: "Windows explorer" and "detach the program".
I tried to move new folders in but nothing was changed.
Please, what is my problem? How could I solve it?
Thank you!

Answer:"Frequent" and "attached" disappear from Explorer Icon

Problem solved!

Jump Lists - Reset and Clear All Items

Delete everything in these two folders:

%APPDATA%\Microsoft\Windows\Recent\AutomaticDestinations
%APPDATA%\Microsoft\Windows\Recent\CustomDestinations

And then you can make new shortcuts as you want!

1 more replies
Relevance 193.43%

If I open "My Computer" and then I double click on the C: drive icon (or any drive), it opens up a new window with the Search panel on the left. If I right click on a drive, the menu comes up and "Search" is the in bold, indicating it is the default. How can I change this so it is no longer the default, but opening it up with "Open" as the default?
 

Answer:Explorer Window defaults to "Search" instead of "Folders"

Start> Run> type: regsvr32 /i shell32.dll then hit OK.
If that doesn't work, try this script repair from Doug Knox.
folder_open.vbs
 

2 more replies
Relevance 193.43%

Hi, I'm a new-commer and have been following this thread avidly and taking everyone's advice as I too have identicle problem to Chaz and other bloke i.e my PC (XP) is very slow, shows torch when you open "My Computer" for 15 secs, and when I use Explorer takes ages to find a web address so I'm using Firefox which is fine. Been bothering me for months, tried RWnewson's registry and didn't work. i don't have. Created shortcut direct to C drive to bypass "My Computer" delay however while this works, PC is becoming worse as when I move any files from one folder to another within the C drive the PC can;t cope and stops responding. HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanc ed]
"NoNetCrawling"=dword:00000001 anyway.
My computer is not part of a home network nor does it say searching when I open My computer. This did all start when I installed software for new digital camera and webcam. Uninstalled cameras but still runs slow. Bugger.. Help. Tried registry cleaner and various virus killers. There is nothing threatening.
Interestingly when I end process for sychost.exe everything works fine but then Windows closes down in 30 seconds. PLEASE HELP!!!!
You all seem interested in Hyjack this report so here is mine
Logfile of HijackThis v1.98.2
Scan saved at 00:00:20, on 26/10/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2900.2180)

Running processes:
C:\... Read more

Answer:XP "My Computer" and "Explorer" taking ages to open

assuming you ran spyware and adaware cleanups, i would suggest reinstalling windows..... Windows (every version) will eventually slow down and not respond, act very unstable, not cooperate, and eventually it will commit suicide and give you major blue screens. then the computer has problems booting... a reinstall (a fresh reinstall preferebly) would probably fix it.....

could you post your system specs? that may help a little bit...
 

3 more replies
Relevance 193.43%

When attempting to browse folders using Explorer opened from Start Menu Or left click on start button, Explorer will allow click on "-" to close paths, but hangs with hour glass if any attempt is made to expand any path or open any file. Explorer remains in this state until closed, at which time Windows asks if I wish to report the problem to Microsoft.
If I use the "My Computer" icon on the desktop to browse, all actions including access to networked resources work perfectly.
Can anyone please explain the difference between the two file browsing utilities and offer an explanation of the above?
My system is: AMD 3000; 2GB Ram Xp Pro with all service packs and updates. I am on a wired network with fixed IP addresses. Other network components are: Old Dual P350 with 0.5GB Ram running Windows 2000 (Explorer on this machine has no problems including access to networked resources); Buffalo 1TB Link Station; 2Wire ADSL router and HP LaserJet 1100 printer.
 

Answer:Solved: "File Explorer" hangs, "My Computer" does not?

8 more replies
Relevance 193.43%

Hello, i have been living with this issue for some time now. I run XP pro, I have a 2GHZ AMD processor with 1GB of RAM. I normally leave my computer on but when I have to reboot it is painful. I run disk dfrag, adaware, spybot, cc cleaner, spyware blaster, spywareguare etc... on a regular basis. I have run Hyjack This files in the past, I have tried deleting the prefetch files. I have run MS bootVIS. Would anyone consider helping me to put this to bed. i almost think that it sounds like a hardware issue but i'm not sure how to diagnose the problem. I have gone into msconfig and reducing the programs that start at boot-up but this didn't help much.\


thanks in advance, CH

Answer:My computer takes 18 minutes to boot-up ""Help""

welcome

to start, make sure there are no yellow alerts in the device manager.
click view, then show hidden devices in the manager.

list your complete system specs including the supply.
once your system has windows running, does it behave accordingly? fast enough?

how many antivirus programs are installed?

19 more replies
Relevance 192.85%

Hello,
First let me tell you about my system.   This is an Inspiron
E1705/9400 laptop with the T7400 Core 2 Duo processor running at 2.16
GHZ.   It has 2 GB of RAM and a brand new 500GB Hitachi Travelstar hard
drive (7200 RPM).   It also has the GeForce Go 7900 GS video card.   
It previously had Windows XP Professional (32 bit) and worked fine.  
But, I have three computers in my home and home office and would like
them all to work better together on my wired home network, so I am
upgrading all three to Windows 7.   My two desktops (one is Dimension
XPS 420 and the other is Dimension XPS 430) seem like they will be no
problem to upgrade to Windows 7.   But, this laptop was not listed on
Dell's Windows 7 Compatibility List.   However, the Windows 7 Upgrade
Advisor that I downloaded and ran seemed to say that it was OK to do a
clean install of 32 bit Windows 7 and it only had a few minor concerns,
where it said to check for updated drivers from the manufacturer.   The
laptop originally came with a 100GB hard drive.   For my use, that is
getting very small, so I decided to get the same exact 7200 RPM drive
in the 500 GB size.   This will allow me to do a clean install of the
32 bit Windows 7 OS on the new hard drive and not have to wipe the old
drive to do it.   I can just hold onto the old HD and stick it back in
whenever I might ... Read more

Answer:Minor Problem with New Windows 7 Installation on my Inspiron E1705/9400 - two entries for "Base System Device" under "Other Devices" with yellow exclamation point

BTW, I just downloaded and installed the driver pack from that ftp location and it worked, even for Windows 8.1 - 64 bit.
Thanks Steve!

Roger

9 more replies