Computer Support Forum

Safe Mode stops at agpCPQ.sys

Question: Safe Mode stops at agpCPQ.sys

ok, i recently had my computer get repaired do to a RAM stick that had fried. When i got it back, i powered up my comp and everything was fine until it reaches the windows logo. the logo is very dim and there is no loading bars. So i restarted the computer and this time, everything went well.....

But when i installed all my softwares(the computer had been restored), i restarted the computer. It did the same thing as the first time. I restarted the computer and it did it agian....it has been doing it ever since. Sometimes it wont even boot up.(no beep, and black moniter)

I tried putting it in safe Mode but it stops at the file agpCPQ.sys...

When i try inserting the windows xp recovery cds. it brings me to the screen "press R to start recovery" then i choose what type of recovery i want. But after this, i see a loading bar and once the loading is complete..the computer freezes up.

Its as if my computer wants nothing to do with xp...

Help Would Be Appriciated! Thanks

Relevance 100%
Preferred Solution: Safe Mode stops at agpCPQ.sys

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Safe Mode stops at agpCPQ.sys

Who repaired your system? Didn't they provide a repair warranty?

Note: If you have a system repaired in the future, BEFORE you take it home, insist they boot the system while you're there.

2 more replies
Relevance 89.38%

Running XP SP3 on Lenovo T410s. After installing and rebooting windows update, computer blue screens on normal boot and hangs on agpcpq.sys in Safe Mode. Tried Recovery Console, but it blue screens before it gets to the menu. Have updated the bios, to no avail. Tried to access the drive through a USB adapter, but XP nor 7 will initialize the drive. The only thing I can get into right now is a command prompt through Windows 7 CD. All out of ideas.

Answer:XP Won’t Boot in Safe Mode, Hangs on agpcpq.sys

Hi and welcome to TSF try the solutions here to fixboot or master boot
Computer stops responding with a black screen when you start Windows XP

3 more replies
Relevance 85.69%

Hello there, I'm Luke!

First off, I'd like to mention that I've read through this thread on the forum:
http://forums.majorgeeks.com/showthread.php?t=199765
which I found after many many Google searches about the issues I'm having!

I don't really know where to start with this, so please forgive me if things are a bit all over the place! I won't post about EVERY. LAST. DETAIL. on this first post, as it may fill an entire page worth with just the first post, that and the fact that it may be off-putting to anyone reading it!

NOTE: My Packard Bell Windows XP PC/computer is over 11 years old (got it back in 2003), of which through a recent 'chkdsk' I found out that I had last reformatted it back in January 2007, so I've been using it fine since then, mostly on and off, and more-so 'off' since getting a new Windows 7 64-bit laptop about a year and a half ago now!

Back Story

Anyway, I'm going to start this story/journey from where things went from normal, to bad, to worse!

About almost a week ago now, I loaded up my old Windows XP PC like normal and as it hadn't been on in about a week or more at this point, then Norton Internet Security needed to run updates and a quick scan to 'fix' it from showing red as a warning, instead of green to show its all good/safe! This is just one of many many times I've done that, as I haven't been using this PC as much since getting the aforementio... Read more

Answer:[Windows XP Home] Only Boots in Recovery Console (also Safe Mode hangs on agpCPQ.sys)

Re: [Windows XP Home] Only Boots in Recovery Console (also Safe Mode hangs on agpCPQ.

Hi

Lengthy post indeed, but a lot of info and in part as you mentioned Safe Mode was OK, then I would hazard a guess as multiple security apps as in Norton and Avast (even if disabled for live scanning) will conflict as Avast will have a running process, so uninstall.

what Service Pack is your XP at?

Have you installed any drive updater application and used it to update drivers?
I would go to your maker of PC and model and install the chipset driver and reboot and then install the graphics driver again and reboot and see how you get on. (may need to do this in Safe Mode if normal mode does not work)

Try this http://support.microsoft.com/default.aspx?scid=kb;en-us;324764
 

2 more replies
Relevance 74.21%

Gateway MX6920 stops at agpCPQ.sysMy son tried downloading sheet music and system locked up.System would not reboot.Safe Mode stops at agpCPQ.sysI have recovery disk but won't read it if it finds a recovery partition.I believe the recovery partition has been corrupted.__ How do I save my digital pictures and files.__ How do I get it to reboot from the Recovery DVD and not the recovery partition?

Answer:MX6920 MA7 recovery stops at agpCPQ.sys

Change the boot sequence in the BIOS so that it boots from the CD first. Also, try last known good config from the F8 menu.Search for agpCPQ in Google. There are alot of hits explaining that error.Data recovery is too hard to explain here but one way is a USB HED enclosure & another way is to boot with a live CD. I use backtrack 5.How do you know when a politician is lying? His mouth is moving.

5 more replies
Relevance 71.75%

I am using Windows XP home edition with SP3. It was working normally. I used to get a popup "Windows cannot find "syssetup.exe"....When i opened yesterday morning I found it taking longer and never go to the desktop after giving the username and password. It stops at Welcome screen with a msg "Loading your personal settings" and no more response. I followed below steps to trouble shoot the issue.

1.I have tried opening in both "safemode" and "safemode with networking", found its working fine. I ran "msconfig" in safemode and unchecked some unwanted applications(nothing related to windows process) and tried again opening in normal mode.... Not worked

2. My internet works normally in safemode. Found some virus by running antivirus in safemode and cleared all the viruses.

It would be really appreciable if any one could solve my issue..

Cheers!

Answer:XP home stops loading at Welcome Screen in normal mode, but working fine in Safe mode

try using system restore in safe mode...it might help...or try selecting the last known good config that worked...if still not work...try repairing it with you windows xp bootable cd..

2 more replies
Relevance 67.65%

Vista wont boot in normal or safe mode

I have tried numerous Startup Repairs

I have noticed that in trying Safe Mode, it stops on the line (10 down from the top) that says ci.dll, and then goes straight into Startup Repair

I have taken the drive out and checked to see if my files are on there and they are

Any help appreciated !

Answer:Safe Mode Stops on Ci.dll - Won't Boot

Do you have your original Windows CD? Boot from the CD if you do and when you get to the screen that asks if you want install or repair your system, select REPAIR. It should open a command prompt window. If it asks you for the Administrator password, just press Enter because it won't have one unless you set it upon installation of the OS.

Once that window opens, type CHKDSK C: /F /R and let it run. Once it's complete you can type EXIT and try and boot again.

Let me know how that works for you.

Good day!

Mike

6 more replies
Relevance 67.65%

Vista wont boot in normal or safe mode

I have tried numerous Startup Repairs

I have noticed that in trying Safe Mode, it stops on the line (10 down from the top) that says ci.dll, and then goes straight into Startup Repair

I have taken the drive out and checked to see if my files are on there and they are

Any help appreciated !
 

Answer:Safe Mode Stops on Ci.dll - Won't Boot

This any help:
http://www.vistax64.com/general-discussion/206264-help-ci-dll-corrupt-missing.html
 

1 more replies
Relevance 67.65%

I took my daughter's 10 year old compaq persario 2100 with a failing HDD and I am making into a chart plotter for my boat. I replaced the HDD with a new one and Installed XP Pro SP3. I downloaded Open C, a free GPS positioning and chart reader, an anti-virus, adobe reader (to read the manual) Foobar 2000 to play some tunes and some raster charts from NOAA. That is all that is on the HDD. I bought a hockey puke GPS receiver that plugs into the UBS. Two weeks ago I had the laptop on and was working and the chart plotter was doing everything as planned. I shut it down as usual. Today I tried to boot up and I get the opening windows screen and then nothing. I tried safe mod a de it stops cold at:
multi(0)disk(0)rddisk(0)partition(1)\windows\system32\drivers\AVGIDSEH,SYS

I've had a lot of experience with computers and XP but I've never seen safe mode just plain stop.

Answer:stops dead in safe mode

hi, you the 2nd person to i posted this link for ,you problem was caused by a AVG antivirus update it seems .new link .avg http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=68967#post_68967had this one posted first but then i found other one http://www.spywareremovalhelp.org/spyware-removal-help/how-to-fix-avgidseh-sys-errors.html

3 more replies
Relevance 66.83%

my computer freezes and blue screens when I try to boot XP now. when i try to boot in safemode it freezes at BtHidBus.sys. I've found out that is a Bluetooth human interface device driver. I can access my HD through ubuntu that i installed on an external. Can i fix this file some how? like replace the file

Answer:Safe Mode boot stops at BtHidBus.sys

What does BSOD say?If you have Windows CD...(if you don't have Windows CD, scroll down)1. Insert your Windows XP CD into your CD and assure that your CD-ROM drive is capable of booting the CD.2. Once you have booted from CD, do NOT select the option that states: Press F2 to initiate the Automated System Recovery (ASR) tool. You?re going to proceed until you see the following screen, at which point you will press the ?R? key to enter the recovery console:3. After you have selected the appropriate option from step two, you will be prompted to select a valid Windows installation (typically number 1). Select the installation number, and hit Enter. If there is an administrator password for the administrator account, enter it and hit Enter (if asked for the password, and you don't know it, you're out of luck). You will be greeted with this screen, which indicates a recovery console at the ready:4. There are eight commands you must enter in sequence to repair your problem.. NOTE. Make sure, you press Enter after each command. Make sure, all commands are exact, including "spaces".These commands are as follows: CD..ATTRIB -H C:\boot.iniATTRIB -S C:\boot.iniATTRIB -R C:\boot.inidel boot.iniBOOTCFG /RebuildNote about the above command.BOOTCFG /REBUILD command which searches for pre-existing installations of Windows XP and rebuilds sundry essential components of the Windows operating system, recompiles the BOOT.INI file and corrects a litany of common... Read more

5 more replies
Relevance 66.83%

Have uploaded URL for my system specification page. In case this fails, my machine is an Acer Aspire 5633WLMi, 160 GB hard Drive (55 GB free), 2 GB RAM, loaded with OEM pre-installed Vista Home Premium (updated by now to SP2). System is 3.5 years old.

Early in its operating life the problem started and persists to this day - even in Safe Mode.

When I attempt to save a Window-created file (created using notepad, wordpad or other Windows program) to my hard drive or external flash drive, explorer crashes within 2 secs of clicking on
HTML Code:
Computer
in the file tree in the left hand pane of the explorer window. Peculiarly the program does not crash with the same invariable consistency if I click on the




expand directory



symbol to the left of the computer icon.

I am at a loss and would very much like NOT to have to re-install Vista.

Can anyone help ?


Dan

Answer:Explorer stops working even in Safe Mode

Hello and welcome to the forum.

First all all did you make a restore point before downloading anything to your computer...

Plus is your computer a laptop or desktop...

4 more replies
Relevance 66.83%

I start my computer in safe mode, and it always stops/hangs on ispnp.sys. I connected the hard drive to my other computer, and replaced that file, and also the one that comes after it, pciide.sys, (the modified date and time matched the date of the old sys), and it still hangs on ispnp.sys. I have some pictures and other things I do not want to lose. When I copied the 2 sys files, I used a connector cable, and I also tried to copy all my pictures and everything but it will not let me access my Documents and desktop because I had a password on the old computer; maybe some of you know how to bypass that? I don't know how I could put in the password, which I have not forgotten.
 

Answer:safe mode boot stops on isapnp.sys

11 more replies
Relevance 66.83%

Windows won't boot up in any mode. In safe mode it hangs up at multi(0)disk(0)rdisk(0)partition(1)\windows\system32\kdcom.dll. I booted the system using the xp cd and went through the repair process selecting r in the windows menu. After trying to restart windows in the safe mode again the computer hung up trying to load kdcom.dll. Any suggestions?

Answer:safe mode windows xp stops at kdcom

I also have the same error. It seems to have happened after the last MS patch

3 more replies
Relevance 66.83%

Hey everyone. Recently my computer crashed and when I was trying to start it up again on Safe Mode to fix it, it just hangs on crcdisk.sys. When I try to load it "normally" it justs stops at the loading bar and doesn't load from there. I heard the only way to fix this is to just re-install Vista again. Now before I do this, I'm using a partition to back-up my hard drive onto another external hard drive as I don't want it to wipe out while I re-install Vista. I was wondering if there was any way I could re-install Vista without the cd? I was also wondering what re-isntalling Vista meant because I know there is a difference between setting your computer to factory settings and just re-installing Vista. I have a Sony Vaio NR430e running on a 32-bit system. Thanks!

Answer:Safe Mode Stops Loading After crcdisk.sys

Before performing such a drastic measure, lets take a look at the system from an external environment.You will need a USB drive and a CD to burn. There will be several steps to follow. Download GETxPUD.exe to the desktop of your clean computerRun GETxPUD.exeA new folder will appear on the desktop.Open the GETxPUD folder and click on the get&burn.batThe program will download xpud_0.9.2.iso, and upon finished will open BurnCDCC ready to burn the image.Click on Start and follow the prompts to burn the image to a CD.Next download driver.sh to your USB driveAlso Download Query.exe to the USB drive. In your working computer, navigate to the USB drive and click on the Query.exe. A folder and a file, query.sh, will be extracted.Remove the USB & CD and insert them in the sick computerBoot the Sick computer with the CD you just burnedThe computer must be set to boot from the CDIn some computers you need to tap F12 and choose to boot from the CD, in others is the Esc key. Please consult your computer's documentation.Follow the promptsA Welcome to xPUD screen will appearPress FileExpand mntsda1,2...usually corresponds to your HDDsdb1 is likely your USBClick on the folder that represents your USB drive (sdb1 ?)Confirm that you see driver.sh that you downloaded therePress Tool at the topChoose Open TerminalType bash driver.shPress EnterAfter it has finished a report will be located on your USB drive named report.txtThen type bash driver.sh -afPress EnterYou will be prompted t... Read more

4 more replies
Relevance 66.83%

WIndows explorer keeps stopping and trying to restart, eventualy it just stops working. If I try to boot up in safe mode, I simply get a windows explorer has stopped working. How can I fix this. Should I do a system repair?

Is there any other way to run explorer?

Bill

Answer:Windows Explorer Stops even in Safe Mode

Hello Bill

Try doing a System Restore to before the problem started.

.

1 more replies
Relevance 66.42%

Lsas.blaster.keylogger (Security Tool, they call themselves) virus stops all malware software from running; doesn't let me reboot in Safe Mode because arrow cursor is disabled; doesn't let me select System Restore; it stops Run/msconfig if I try opening it; won't let me open antispyware on an insertable USB chip either.

I can, however, decline it's requests to clean my computer and can get onto internet. Desktop background is black but Start menu will open.

This is a 1 yr old computer we built. Very fast desktop with Windows XP. It also won't even let me open My Computer/Properties, for example.

Please help !

Answer:Lsas.blaster virus stops Safe Mode & .exe's HELP

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

1 more replies
Relevance 66.42%

Ok I will list the problems in order that they occured...

-Went to a site, suddenly I get the infamous fake spyware icon (the blue shield) and it says I have all these viruses and starts scanning

-I try to open up AVG and it's locked. I try MBAM and it's locked. Thankfully super antispyware works. and finds 4 of the trojan dropper and gen combo

- I delete and restart my computer in safe mode when I GET A BIG BLUE screen telling me that there was a problem (something like hardware problem or changes). This has never happened to me! I usually run safe mode and run my scans and boom my problem is solved but somehow it seems to be blocked!

-On the bright side my computer WILL load in regular mode but I seem to have the yahoo redirect problem. I ran trend micro, AVG, MBAM, and super antispywar and they dectect NOTHING. Please help! I'm really out of ideas on what to do. I ran a combo fix but it didn't take long and really had nothing in the log that stood out. If I need to post a hijack log I will gladly but I'll have to get back to the infected computer.

Please help! Thanks! I hope I don't have to reformat!

More replies
Relevance 66.42%

IDE 80 GB internal drive, model ST380011A
Did diags, 100% functional.

Driver corrupted? When I run the system in safe mode, it now stops at the file above. After 10 minutes of attempts to boot, system finally succeeds.

Here is where th SAFE mode stops each time:

/drivers/agpcpq.sys each time

Dell Dimension 3000, 80 GB IDE drive internal. XP Pro, 512 MB RAM.

Suggestions?

Answer:Ide Drive Whirring Non Stop, Safe Mode Stops

From what I can find it appear to be the vido driver. Check the Event Viewer in the Administrative tools.

5 more replies
Relevance 66.42%

when starting in any of the safe modes it stops and freezes up in win system 32....What can I do???? window

Answer:when i reboot in safe mode it stops and freezes in winsys 32

Please post why you are having to try starting Windows in safe mode.Also post the full error string as just posting "win system32" tells us nothing as it's incomplete.

3 more replies
Relevance 66.42%

Windows 7 login screen fails to load, just get a blank desk top with a cursor. Try to start in safe mode and it gets stuck at classpnp.sys and fails to progress. Chckdsk is auto running on power up. Feels like its running hotter than normal. It's a 5-6 yr old Toshiba Saltallite.

Thanks
 

Answer:Log in screen no loading, safe mode stops at classpnp.sys

6 more replies
Relevance 66.42%

Kept getting BSODs that seemed to indicate malfunctioning ATI (onboard) video driver, tried everything I could think of to update/straighten that out to no avail. So I installed a 3rd party card. Everything seemed fine for a few days, but then got a stop 024. Perfmon showed everything was good (only thing of any note was that Kaspersky A/V wasn't recognized).
I also have been getting this strange little Warning box at the upper L corner of the screen whenever I reboot. It's empty and only shows whatever was on the desktop at the time it loaded. My attempt at attaching a screenshot of it failed, but someone here hopefully knows what I'm talking about.

Answer:Various BSODs, safe mode boot stops at ATIpcie64.sys

When I tried to run chkdsk again, and when I rebooted it did finally get past loading the driver AtiPcie64.sys. However, it wouldn't then run chkdsk....
Sure would appreciate any help, folks!

8 more replies
Relevance 66.42%

I picked up a trojan at a web site (an Amazon vendor, no less...). McAfee blocked it from completing whatever it does, but not before several changes were made to my XP Home system. The file McAfee detected was 9129837.exe. Web searches at Symantec and McAfee say it is low risk for home users, but the Trojan descriptions on their sites do not fully describe what it is currently doing. Using resources from various sites, I think I removed all active content, but am left with settings made by the trojan in its attempt to thwart removal.One change made that I have not figured out yet is how they are able to prevent Safe Mode from running. The computer boots normally otherwise, but any Safe Mode option hangs.The trojan also made it so that exe files will not run from the command prompt, from double clicks, and right-click Open. I got regedit.exe to run by copying it and saving as regedit.com. Running IE7 and other applications from shortcuts still work.One possible cause I found posted as a reason for the exe problem (changing HKEY_CLASSES_ROOT/.EXE) does not appear to be the problem because the registry entry there is the same as I see on other XP computers.I am still looking for the Restore disk for this machine (an eMachine a few years old), so suggestions that don't require that CD are appreciated.Any ideas?

Answer:Trojan stops XP from using Safe Mode, running EXEs.

We can try Malwarebytes...Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Important - Rename mbam-setup.exe to mwb1.batDouble-click on mwb1.bat to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results bu... Read more

7 more replies
Relevance 65.6%

I opened msconfig and after clicking on the Services tab --> hide all Micorsoft services --> disable all and then clicked on 'apply' System Configuration Stopped responding [and I could not even restart my PC]. I did so manually. I tried again this time instead of selecting 'Disable all'' I just disabled one of them (Adobe update service) to see if I could do this one at a time. but still it stopped responding and froze everything.
Having no choice I rebooted manually and then pressed the F8 key to reboot in safe mode BUT I got a boot menu asking me which HD I wanted to use to boot into and not the DOS screen giving me a choice for safe mode.
BTW my Win 7 OS HP 64bit is now booting from an SSD drive on a PCI-e card and am wondering if this has anything to do with it.
Anyhow, having done my usual monthly virus scan as well as malaware by using 3 different sources (mine and 2 online ones) just yesterday this virus/trojan/malware is probably not the cause.
Why do I want msconfig or a safe mode boot. Trying to reinstall my HP scanner software and drivers which I am having a little bit of problems with--so not related.

Answer:urgent; Can't boot in safe mode and msconfig stops responding

Not knowing what was in startup originally, it's hard to say what you deleted but I'm guessing it had to do with a driver for your PCI-e SSD. If that's the drive you boot from, the startup boot is saying it's not there. What's the BIOS say for the order of boot devices? What other drives are installed?

9 more replies
Relevance 65.6%

My daughters computer is a Windows XP (as is mine) - she first could not go anywhere or click anything without an error window popping up. Each error window was different. She couldn't even get into the screen to choose system restore, recovery would go to the same day or day before only. She finally got into safe mode and started a system restore which froze at 37% at a file that she is sure is the problem. Then it went to black screen. We are sure it's a virus (at least I am) but we can't get into her programs to run anything. Can you help me??? I am computer stupid, so give me kindergarten instructions, please. My Bad, I have just been informed that it did not go to black screen, she just turned it off - now a file is missing or corrupt.
 

Answer:System restore in safe mode stops at 37% then black screen

14 more replies
Relevance 65.6%

windows unexpectedly restarted and now keeps restarting. I've read some articles here and understand it keeps restarting because of an error and that it may be easy cd creator causing the problem wich i did somewhat recently get. one article also tells how to disable the restart feature if the drive is in a bootable state, but my problem i keep restarting. i never finish booting up. when i try last succesful restart it seems to continue as a normally start up scandiscruns windows logo then bam restart. when i try system restore say preparing system restore feature then scandisc starts finishes then nothing ever happens. when i try safe mode a list of drivers star about a page and a half then stops responding. what do i do im stuck and frustrated. please help!
 

Answer:keeps restarting and stops responding when trying safe mode and restore features

i ran into a problem that sounds similar to what you're seeing. i believe the problem was the result of a bad sector on the hard drive. if you have the same problem you'll need to run scandisk or some other utility capable of doing a surface scan and handling bad sectors. unfortunately, the system restore scandisk doesn't seem robust (it didn't work for me, don't remember if it hung or crashed).

ideas for repairing this sort of problem:
- stick the drive into another machine and run scandisk from there
- use a third party utility, such as norton utilities (but note that many utilities, including norton, may not support ntfs, so if you're using ntfs, read the fine print very carefully before purchasing any software). you'll want a utility that provides a bootable cd so that you can avoid using the hard drive for booting.

hope this helps...
 

1 more replies
Relevance 65.6%

I'm at my wits end here. I'm infected with at least Virtuomonde and Smitfraud. Here is what's happening.

All antivirus and HJT that I've tried (spybot, HJT, Avast, etc) start to run and then die. When I try to restart I get a dialog box that says, cannot access, file, drive, path--you may have insufficient rights.

clicking on browser links redirects to a random page.

booting in safe mode gives me a quick BSD and then starts over

Active desktop has died--I deleted an html "warning" image from the recovery console on a Win XP CD.

Can ANYBODY help or am I doomed to reformatting?

Currently running Win XP Home Edition--SP-3

Thanks so much!

Chuck

Answer:Malware Blocks All Antivirus and Stops Safe Mode Boot

You have the new rootkit that's out thereWe Need to check for Rootkits with RootRepealDownload RootRepeal from the following location and save it to your desktop.Direct Download (Recommended)Primary MirrorSecondary MirrorSecondary MirrorSecondary MirrorZip Mirrors (Recommended if you have a slower connection or if the Direct Download mirror is down)
Primary MirrorSecondary MirrorSecondary MirrorRar Mirrors - Only if you know what a RAR is and can extract it.
Primary MirrorSecondary MirrorSecondary MirrorExtract RootRepeal.exe from the archive (If you did not use the "Direct Download" mirror).Open on your desktop.Click the tab.Click the button.Check all seven boxes: Push OkCheck the box for your main system drive (Usually C:), and press Ok.Allow RootRepeal to run a scan of your system. This may take some time.Once the scan completes, push the button. Save the log to your desktop, using a distinctive name, such as RootRepeal.txt. Include this report in your next reply, please.-----------------If the scan doesn't run or won't complete, just select Drivers to scan

1 more replies
Relevance 64.78%

I have not done scratch installs for a while now but was trying to revive an HD with problems. A Safe mode boot shows the trace of operations performed by the operating system. This trace stops at 'Drivers'
and hangs. If not in Safe mode an unrequested 'hard reset' takes place.

On the Win7 Windows Repair Environment it shows an option for drivers install. Is this simply the
motherboard drivers disk or is the Installation disk the source of the drivers files to refresh them?

From others I recall that finding drivers on an install disk where it goes and looks for them can be an endless task. Please provide any needed instructions to get through it.

More replies
Relevance 63.96%

I just bought a new custom machine from Zuke.com, good service by the way. I got it built with motherboard, power supply, RAM and video card. I figured I would just install my old hard drive (Seagate Barraccuda 160GB) and be up and running. Upon boot up, I get this:
We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.

If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Last Known Good Configuration (your most recent settings that worked)

Start Windows Normally

Use the up and down arrow keys to move the highlight to your choice.

Seconds until Windows starts: 30
The big problem here is that I cannot select any of the options because by this time, my keyboard has stopped responding. It works fine at first, lets me hit DEL and go into BIOS setup. But then once it gets past that stage, the keyboard stops responding altogether.

If I put my Windows XP cd in to boot from there to repair or reinstall windows xp, it will give me the message "booting f... Read more

Answer:boot failure-safe mode-keyboard stops responding before windows starts.

Better to try a hard-wired PS/2 Kbd and mouse.

I just had problems with my USB drivers not loading properly and had to use a hard-wired PS/2 mouse to overcome the problem.
 

1 more replies
Relevance 63.96%

Good Evening,

I need help please. My home PC was attacked by the vundo virus over the weekend. With the help of someone at geekstogo.com, it was deemed cleaned.

McAfee ran this morning on schedule. When I left it was at 90% with nothing detected. I returned after 3 hours, opened webmail to dump unwanted mail and clear spam folder. I exited webmail and attempted to open MS Outlook. McAfee asked if I wanted to allow a change to registry for Outlook and I responded to block change. I At the same time, I got error message that I did not have permission to open the application. That didn't seem right so I decided to run Malawarebytes(trying to run it at least once a day). McAfee asked if I wanted to allow Malawarebytes to run and I allowed it. While running Malawarebytes, McAfee displahyed that it had discovered and quarantined Artemis "something". Malawarebytes finished runnning but reported no detections.

I attempted to open Outlook again and received the same error message. I then restarted the computer using Start/Shutdown/Restart. Just as the system shutdown, I heard the Windows error sound again. When the system restarted, there was a black screen and the cursor. I then attempted to start in Safe Mode and now have safe mode with the black screen. I have tried Safe Mode in Command Line, Safe Mode with Last Known Good Configuration. None of these worked. I think this was virus related and now I can't get windows to boot at all.

We used combofix when... Read more

Answer:[SOLVED] Black Screen after reboot - Safe mode stops at driver agp440.sys

have not seen that in a long time

http://support.microsoft.com/default...b;en-us;324764

5 more replies
Relevance 59.45%

Hi,My Computer which has Win Xp Sp3 is behaving like it is in safe mode , eventhough it is in normal mode .I noticed this because ,1. Avira Antivir Guard and Update cannot be launched bcz Scheduler is not running.2 . I tried to start scheduler ( under services.msc ) , but can't start it bcz of error 1084 ( safe mode situation ) .3 . I can't use Windows Update , bcz of error Error number: 0x8007043C ( same safe mode condition )4 . I ensured that BITS was set to automatic , but it can't run bcz of 1084 error.I have scanned with Malwarebytes, Spybot S&D , SuperAnti Spyware ( in real safe mode) - No DetectionHere is the dds log ,DDS (Ver_09-09-24.01) - NTFSx86 NETWORK Run by Administrator at 16:45:23.03 on Mon 09/28/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_12Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.510.112 [GMT 5.5:30]AV: ZoneAlarm Security Suite Antivirus *On-access scanning disabled* (Outdated) {5D467B10-818C-4CAB-9FF7-6893B5B8F3CF}AV: AntiVir Desktop *On-access scanning enabled* (Outdated) {AD166499-45F9-482A-A743-FDD3350758C7}FW: ZoneAlarm Security Suite Firewall *enabled* {829BDA32-94B3-44F4-8446-F8FCFF809F8B}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\system32\svchost.exe -k netsvcsC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Avira\AntiVir Desktop�... Read more

Answer:Safe Mode Error, WinXpSp3 behaves like it is in safe mode even in normal mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 59.45%

I have Lenovo laptop with i-5 processor, 8 gb ram and 1 tb HDD with win7 os. On last Monday evening (18-Nov-2013) when i tried to start my laptop, it gave me blue screen error just after the windows boot logo (before appearing of login screen), and this error lasts just for a fraction of second. And right after that it restarted and showed options of Safe Mode, normal mode etc. Then I ran the system in safe mode but it stops while loading aswrvrt.sys and again gives blue screen error. I tried repairing my os with the win7 CD and repair disc but the process stops after the windows files are loaded. Its not even able to detect the OS, it just hangs there. While trying to format and install a fresh os the same thing happened again, it gets stuck at "setup is loading...". I have tried farbar tool also but as I am not able to run the repair option I tried running in freeDos but it says that the program can't run on Dos. Please help me out with this...

Answer:Not able to boot, problem with aswrvrt.sys, safe mode stops at aswrvrt.sys

Welcome to Bleeping Computer.
 
The following will serve two purposes, it will let us know if you can boot from a bootable disc, and it will let us know the condition of the hdd.
 
Please download SeaTool for DOS.
 
When the SeaTools for DOS website opens click on I Accept, then click on the Download button in step #4.
 
This download is a ISO image which you will need to burn to a CD in order to create a bootable disc with which to run the diagnostic tests.
 
To burn this ISO file to a CD or DVD please downlaod ImgBurn and install it.
 
Insert blank CD or DVD into your CD/DVD drive.
 
Open ImgBurn, and click on Write image file to disc.
 

 
Click on the Browse for a file icon:
 

 
Right click on the Start orb , then click on Downloads.  Scroll down to the SeaTools for DOS download and click on it.  This will load the ISO image, you will see the information listed as it is in the image below outlined in red.
 

 
Click on the blue arrow (also outlined in red) to start burning the bootable CD.
 
Once the disc is created load it in the CD/DVD drive and restart the computer.
 
Please note:  You may need to change the boot order in the BIOS so the CD/DVD-ROM is the first device in the boot order, and the hdd is the second device.
 
Please run the long test and include the results in your next post in this topic.
 
 
Edit:  Is this topic posted at another website?

7 more replies
Relevance 58.63%

WinXP sp3 will not boot. Black screen where Win logo should go after post. In safe mode boot, stops after 3rd item loaded.

Found on the net may be due to MS update or virus, but cannot find confirmed fix. User confirmed MS update occurred on shut down last night and that she got a virus notice before calling me. Another forum suggested chkdsk /p/r, but did not fix. Tried reseating ram and hdd data cable.

This is the 4th workstation I have had to do grave emergency work to this week. Any suggestions to get this back online would be GREATLY appreciated!

Answer:Won't boot, safe mode boot stops at kdcom

System and manufacturer?

You've checked the system manufacturer's website...for possible solutions when the system fails to boot properly?

I know that HP routinely provides such for their systems and I suspect that most do.

Louis

3 more replies
Relevance 57.81%

okay... so i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode.... ive tried "last known good config..." and that too boots in safemode. so now im stuck, i cant get on windows. any help please?

im willing to start over but i dont know how to do that from here
 

Answer:STUCK in safe mode boot, safe mode doesnt work and restarts, REPEAT

11 more replies
Relevance 57.4%

I'm new here and in hopes of getting this resolved. I just installed the new Norton Systemworks 2005 and rebooted after installation. When the boot screen got up to the blue screen with the Windows XP logo before displaying the login names where you put in your password, it just stops. I restarted a few times and waiting a few more times thinking it may need to 'finish' installing. But each time gave the same results. Finally, I went in with 'Safe Mode' and got in with no problems. Tried again in normal mode after looking around for any obvious problems (none found)... back to square one. Tried again in 'Safe Mode with Networking' and it failed like normal mode so I suspected a networking problem??? The last thing I tried which made me mad is that I tried to uninstall Norton Systemworks in 'Safe Mode' and that failed!! Anyone in these forums know the cure? :dead:
 

Answer:Unable to get to login screen, works in Safe Mode but in Safe Mode w/ Networking

Just a thought

Safe-Mode
Start \ Run \ msconfig \ diagnostic startup
disable any services attached to your most recent install and restart
should get warning next boot about using msconfig, its ok
One key service that needs to be available is the installer service
Try the uninstall, if doesn't complete
Try the uninstall string in the registry only if you know what you are doing

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Under it you will see a list of installed programs. Some don?t show up as words but you can figure out what they are by looking at their values. What you are looking for is the uninstall string. Double click that key as if you were going to modify its value. Do a CTRL + C to copy and then exit the registry editor.

Go to START \ RUN and paste the uninstall sting and hit enter. This should launch the uninstall.

Just a thought though as I am not infront of a test system at the moment. You should research this a little further so you have a clear understanding of what you can and can't do with msconfig.

or simpler yet

Safe-Mode

Start \ Programs \ Access. \ System Tools \ System Restore

Select restore point prior to install of whats giving you the problem.

Again, Good Luck

PS If you try to install it again, turn of antivirus and other open programs etc..
 

1 more replies
Relevance 57.4%

i have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.

i tried a different graphics card,but no joy.so i replaced the hdd drive and put a fresh copy of windows xp pro edtion on,but it loads all the files(i have not pressed f6)i just let it run its course on the disc,then it hangs up on the blue screen again with the words(crit error 0x0000007f)check hardware etc and if this is the first time you have seen it try starting windows again.

Thankyou for all your time.
 

Answer:Solved: xp safe in safe mode fine...mormal mode blue screen

Start in Safe Mode and look in C:\Windows\Minidump for crash log files with a dmp extension, like Mini071008-01.dmp. Zip 4-5 of the latest ones and post here as a ZIP or RAR attachment. The log file contains information useful to determine what caused the error, most likely hardware.
 

2 more replies
Relevance 57.4%

Hello,

I've got a peculiar and suspicious problem, but an expert in the Malware Removal forum found no infection on my computer (see the thread here.)

One of the symptoms I'm seeing is that the Malwarebytes' Anti-Malware (MBAM) installer will not complete without errors in Windows XP Pro SP3 after a normal boot. After acknowledging the errors during the install routine (which are always the same, a screenshot is attached to this thread), the installer seems to finish. However, the second symptom is that MBAM then will not run due to the same pop-up error message. It's a Visual C++ Runtime Library error that says, "This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information." Please see the screenshot in this Malware Removal thread.

I know that normally, some malware will disallow running the normal filename for MBAM, so the first thing I tried was renaming the file to something else, including using different file extension such as .com, .bat, .scr, and .pif. None of these renaming attempts worked. This is where I started to observe really strange behavior. After uninstalling my first MBAM install attempt, I found that I could install MBAM when booted to Safe Mode (after changing the registry to allow this and starting the installer service in Safe Mode). After the install I could also run MBAM in safe mode. I then rebooted to normal mode, and MBAM sti... Read more

Answer:Malwarebytes' Anti-Malware Runs in Safe Mode, but not in Safe Mode With Networking

Re: Malwarebytes' Anti-Malware Runs in Safe Mode, but not in Safe Mode With Networkin

I just found the solution to this issue in Malwarebytes' own forums here. Apparently this is a known bug.


Thanks,

krellkraver
 

1 more replies
Relevance 56.17%

I recently attempted to clean my brother's computer after he aquired a virus from the torrent file program he uses. Regardless, I cleaned a trojan and a backdoor from his system from safe mode. I can not boot in normal mode. Everytime i try the system gets hung up at the windows loading screen then the screen turns black and sits there. I have to hard reboot. I ahve used a repar CD and i have come across an error 0x800700b7, i have also recived this when i tried to work around this problem "identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}"

OS= Win 7

Answer:System will only start in Safe mode, Clean virus in safe mode

You can spend a lot of time trying to fix the boot problem and clean the virus from the computer, or you can nuke it and reinstall Windows. I wouldn't bother trying to fix it, personally - I'd back up what I could and then I'd install Windows again.

9 more replies
Relevance 56.17%

stuck on safe mode tried f8 also properties please help

Answer:i am suck on safe mode dell laptop safe mode in all 4 corner

Boot to repair tools either by F key or by booting to a Windows 7 dvd. Google is evil

5 more replies
Relevance 56.17%

I booted into safe mode to try an fix a issue I selected to boot with command prompt butb I have a all black screen an can't get out of safe mode now I restarted the laptop a few times still the same 'anyone know how to fix this?

More replies
Relevance 56.17%

Hello,

Recently my dad's computer had a corrupted hive and boot.ini. Via this website, I was instructed to run a chkdsk /r while in the recovery console. Everytime I used his OS disk to get into the recovery console, it prompted me for a password and I didn't know it (nor could I leave it blank). I decided to use my OS disk from my computer and I could fix the problem. Now, though, everytime I startup the computer, it prompts me to start windows normally, in safe mode, in safe mode with networking... To give further information...on that same screen there is an option for Windows XP and Windows XP Home Edition. Don't know if that has something to do with it. They both work though when I press enter on either one. Could anyone help me stop the computer from prompting me??? Thank you for any help.

More replies
Relevance 56.17%

This morning we had a power outage and when I turned my computer back on, it would not boot. I tried several times to hard boot, with no luck. Then I tried safe mode. Ran an antivirus scan and it showed malware and several infections which it cleaned. The computer still would not boot normally. I then ran chkdsk, still would not boot normally. I have ran malware bytes, registry repair and the registry defrag program as well as done a disk clean up. It still will not boot in normal mode.
Since my last problems that you helped me with, I have upgraded to a broadband internet connection and have a home network. The 2 other computers on the network are fine.
A week ago, I had purchased Avast internet security and had problems immediately. It would not allow me to connect to the internet. That was uninstalled and I went back to the free Avast antivirus, Zone alarm and Spyware blaster. I was very unhappy with Avast customer service and support iYogi and decided I did not want Avast on my computer at all. I have since downloaded PC tools free antivirus. Once I have my computer operational again, I am open to suggestions.
Fortunately, I did not change anything on the other 2 computers. Just mine.
Running Windows XP 3 .
Thank you.

Answer:[SOLVED] computer will not boot except in safe mode or safe mode with networking.

what are you running
video card
cpu
m/board
ram
power supply
brand
model
wattage

check the listings in the bios for voltages and temperatures and post them

the outage may have damaged the psu

19 more replies
Relevance 56.17%

Hello ladies and gents , im having a problem with my emachine T1120. It starts up and goes through the welcome screen then goes to bios settings , I click on "start windows normally" and enter it and the machine runs right back to the original bios screen , cant figure, unplugged and pressed the power button several times plugged in same result, why? I added no new hardware or software just turned it on and wa la

Answer:Win.xp emachine starts and runs safe mode, safe mode with networking

hello and welcome to BleepingComputer,,
 
     this is reminiscent of BIOS settings that need to be reset to default. you can do this by using that option in BIOS. do you see the option there? 
 
if this pattern exists after BIOS reset, then there are other XP level options to try like console command /sfc scannow and chkdsk /r
 
 not to long ago, i was dealing with a PC that was doing this same thing, and it was the hard drive (SATA) protocol setting in BIOS, it had to be set to IDE.
 
one more thing, this could be blue screen error that isn't halting, just looping boot. is there an option at the boot screen (the one with the safe mode options) about halting on errors?

3 more replies
Relevance 54.94%

Alright this is a family's laptop that is about 5 or even more years old...has windows xp on it dont know the exact one -.-...alright.

My sister has been using it and says she has never done anything to it...which i dont believe but anyways this computer will not boot up what so ever...everytime you power it on it goes to the screen that says unexpected error software/hardware problem yada yada yada...and then it gives you the options of boot in safe mode, safe mode networking, safe mode command prompt, last known good configuration...and none of those will work...we do have the recovery disks to wipe it but are trying to find a better way if possible...and when you try to load into any of the safe mode choices it stops at multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\System32\Drivers\Mup.sys...will stay at that for about 5-10 mins and then just turn off...if you try to just do normal mode or last known configuration it just acts like it loads with the windows and the little green loading bar then shuts off...the more i type the more i think the harddrive is toast but im new and learning so i probably could be wrong. Just looking for suggestions =)

Oh and this pc will run very hot...so if its a hardware issue i would not be surprised.
 

Answer:HP Pavilion will not boot in safe, safe w/networking, safe command or in normal mode

I'm heading to work now ill be back later tonight so just post suggestions and i will try them. =)
 

11 more replies
Relevance 54.94%

I'm having a real bad problem with xp,
Over the past week I had to reinstall XP last week because windows locked me out of my own system. I had rebooted into safe mode to check for a hardware problem, plus before that problem occured I had bought a 3 month old 20 gig hard drive from a friend of mine at college he didn't tell me that the disk lock up's every once in a while. When the hard drive try's to read a sector on the hard drive and when it does it will do this it goes: tick, tick, rick, brack! brack! its nothing dangerously loud.... whens it loading heavy files or programs that are over the size of 125MB it act's like its going to have PC heart attack.........

But anyway, every time I restart my PC and press F8 to Log into safe mode I get the BSOD ( which means Blue Screen of death) I have reinstalled XP 4 times over that past 2 months either due to the system locking me out or file corruption with the OS.... each time windows installs, safe mode is working perfectly but when I put my BU files and programs on it after a week or so safe mode is once again F***** up.......!

also my old 10 gig has the same problem plus I can't use it now because it is slow and can barely handle the stress of my work, examples: ROM hacking, college work. internet playing minor space hogging games, website development minor video editing and word processing. after all that I just named that is on my 10 gig HD I have 4.92gigs left. since I have 20 gig I can do alot more now if its p... Read more

Answer:Safe mode issue or dangerous problem with safe mode WTF now ?

The first thing I would do, is get a new HDD. That could be your only problem. I have a HDD that I cant install windows on, for some reason, it ust wont load, so I used another drive, loaded XP, and formatted the other drive winthin XP and used it as storage and there are no problems. So thats what I would do.

6 more replies
Relevance 54.94%

After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.

Safe Mode with Networking loads normally.

Any ideas or advice?

The computer is an Acer 4743G running Windows 7 Home Basic x64.

Answer:Cannot access Safe Mode but can boot in Safe Mode with Networking

Hello Zarmaki, and welcome to Seven Forums.

Since it will startup in "Safe Mode with Networking", you might see if using the tutorial below to troubleshoot may help to find a cause.

Troubleshoot Application Conflicts by Performing a Clean Startup

Hope this helps for now,
Shawn

1 more replies
Relevance 54.94%

I have a yoga tablet 2 pro. I powered down the tablet one night. In the morning, I normally held down the power button for no more than 2 or 3 seconds to power it up agian until I saw the lenovo logo. Everything was going well, but then it went to an android reboot screen. I never took any action to reboot my tablet, but the screen popped up anyways. I didn't want to reboot my tablet, so I selected the "power off" selection on the reboot screen. It powered off, and then took me back to the reboot screen. I selected the same option once more, but I got the same results. I decided to end the nonsense and just reboot. It wasn't going to hurt anything. When I did, it took me to my home screen where all my apps were gone. I noticed my tablet was then on safe mode. I researched what it was. I'm not sure why safe mode even exists or why it is on my tablet, but I can't get to any of my apps. So I decided to restart my tablet, but after it restarted, I was still on safe mode. I looked up how to take your tablet off safe mode, and all the info I got was to either power off your tablet or restart it and your tablet would be off safe mode. So I restarted it again...still didn't work. I then powered it off again and it took me back to the reboot screen. I have done this multiple times selecting every option on the reboot screen and nothing has seemed to work. I also powered it off and left it over night but that didn't work either. I even tried to power it off, then turn it back on while ... Read more

More replies
Relevance 54.94%

Windows just downloaded an update to my ASUS x83V laptop and now I can't get it to boot up. I've tried booting in normal mode, last successful mode, safe mode, safe mode with command prompt and nothing works.

If trying to boot in safe mode it gets stuck on crcdisk.sys. When trying to boot in any mode it eventually hits the blue screen with a STOP error of 0x0000001E. I have also gotten 0x0000007E and 0x00000024.

I am positive it's the latest Windows Update that caused this because my computer at work, which also runs on Vista and is also an ASUS, had an update yesterday. When I came into work this morning and tried to start up it was unable to and did a start up repair. That didn't work but it gave me a system restore option which did work.

Unfortunately my ASUS laptop does not prompt me to do a repair nor a system restore. The recovery disk I have that came with the laptop only allows me to do a restore which erases everything on my HD.

I'm only somewhat computer savvy; better at working with them than fixing them so please try to put things in layman's terms. Thank you!

More replies
Relevance 54.94%

Good Evening,
I could do with some pointers on resolving an issue. I can only boot into windows in safe mode in Windows 10. Normal mode and safe mode with networking doesn't work. The problem occurred after a windows update. I have removed the latest updates that were installed and cleared any pending ones but it still won't boot properly. I have also run the troubleshooter and tried to recovery to an earlier date which also doesn't work.
The laptop is a HP ENVY 17 notebook. At boot it just gets to the HP logo with the circular loading icon and no further and can only boot it into safe mode. Can anyone recommend the next steps? I have also tried the following;

stopping startup itemsuninstalling hardware driversremoving recent softwarerunning troubleshooters at bootsfc scandiagnostic/selective startups with minimal services running
Would the fact that I cant boot into Safe Mode with Networking imply its a network driver related issue?
Bit of a dead end really, any help would be much appreciated
Kind regards
Trevor

Answer:Can't boot into Normal/Safe Mode with Networking, only safe mode...

Hi Trevor and welcome to Tenforums. There are several ways to approach your problem. When I was reading your post, my initial impression was the same as yours, the Network driver was causing your issue. To be safe, go to Control Panel\Programs\Programs and Features uninstall a program and sort the drivers by date installed. See which drivers were installed at the time you began having the problem. If you find any, I think it would be safe to assume the problem would be one of them. If you have another computer, go to the HP website for your model computer and download those drivers to a USB Flash Drive. Do one at a time and install the drivers you just downloaded and reboot until you find the offending driver. I would do this one at a time so you will know which driver it is in case Windows Update decides to install it again. See if that will work for you.

1 more replies
Relevance 54.94%

Can't boot into Normal/Safe Mode with Networking, only safe mode...
Good Evening,I could do with some pointers on resolving an issue. I can only boot into windows in safe mode in Windows 10. Normal mode and safe mode with networking doesn't work. The problem occurred after a windows update. I have removed the latest updates that were installed and cleared any pending ones but it still won't boot properly. I have also run the troubleshooter and tried to recovery to an earlier date which also doesn't work.The laptop is a HP ENVY 17 notebook. At boot it just gets to the HP logo with the circular loading icon and no further and can only boot it into safe mode. Can anyone recommend the next steps? I have also tried the following;stopping startup items
uninstalling hardware drivers
removing recent software
running troubleshooters at boot
sfc scan
diagnostic/selective startups with minimal services running
Would the fact that I cant boot into Safe Mode with Networking imply its a network driver related issue?Bit of a dead end really, any help would be much appreciatedKind regardsTrevor
 

Answer:Can't boot into Normal/Safe Mode with Networking, only safe mode...

It's uncertain what the problem is - although a networking problem does sound likely.
Start with trying a clean boot:
Perform a Clean Boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows
If that stops the problem, then re-enable things a few at a time until you figure out what's causing it.
Then uninstall the problem program (from Start...Settings...Apps...Apps & Features - if you don't find it there, check the right sidebar for Programs and Features and see if you can remove it from there).
 
Let us know what happens there and we'll move on from there if needed.

1 more replies
Relevance 54.94%

Yea trying to get ino safe mode. When I do hit safe mode and choose my account to log on instead of going to my desk top the screen goes blank and the words safe mode appear in all four corners.
Any help would be great!
Have a good day
John

More replies
Relevance 54.94%

ok i have a huge problem, i no virus scan capabilities in safe mode and in safe mode with networking, now i have tried to go back to reg. booting, and see if it is installed corectly, and from the looks of it, it is all icons and file folders are there and working.....now when im in either one of the two safe modes wither im on the amnstdr or mine the software will not open and it won't open, here is what comes up when i try to open it from program files:

"Faild to start the Symantec Management Client service. Error code returned:
0x8007043c
i am getting frustrated badly with this, i am running XP home ed. on an ACER aspier one, (say what you want but its practical) and as you can tell i am running live update/Symantec Endpoint Protection
and yes everything is up to date, i have waxxed the backdoor troj. with no prob. but i am needing help tring to fig. out how to solve this prob so i can make shure i completly killed the attack...thanx

Answer:No virus scan in safe mode or safe mode with netwrkg

Hi and Welcome to BleepingComputer,

Not all anitvirus programs work in safe mode, I don't know about Symantec but I do know my ZoneAlarm does not. I do not see the reason to run it in safe mode. If you are really wanting to run stuff in safe mode, run SuperAntiSpyware in it and just run your antivirus program in regular windows.

Btw, it sounds like you had something on there that has backdoor capabilities and if that is the case, then unless you reformat the computer, it will never be truly safe again.

11 more replies
Relevance 52.48%

Hi guys,

My problem is somewhat complex so please bear with me. I had malware and adware on my laptop which was really annoying and I tried really hard to get rid of it. So I decided I was going to do a system restore. The system restore kept saying "System restore is initializing". I tried it three times and it didn't work. I looked around on the internet, and someone suggested to do the system restore while in safe mode. This is where I made my mistake. I set safe mode in msconfig.exe (not knowing you could go into safe mode while booting). msconfig forces the computer to boot into safe mode everytime, but my safe mode won't boot. I get a b;ack screen with a cursor. I have noticed that the cursor gets reset to the middle of the screen every five seconds or so. I also see the words safe mode flash in all four corners sometimes. I have tried re-installing windows 8.1 from a bootable usb, but whenever I change the boot priority, it doesn't seem to save my settings. Please tell me what my options are. Will replacing my hard drive do the trick. Thank you in advance.

Answer:I set safe mode in msconfig.exe and safe mode won't boot.

Can you restart and get into your log in screen ? If you can, enter safe mode by pressing the power button icon (lower right corner) then Shift + restart. That gets you to Advanced Settings where Safe Mode and, if that fails, Reset PC to orig settings. If you can't, try a hard reset by removing battery and all external usb attachments and then pressing and holding power button until it shuts down. Repeat a few more times to drain memory, then see if powering up will get you to log on screen.

A system restore in safe mode will just restore the malware. You need to boot into safe mode and run your anti-virus or malware program and have them quarantine and then remove them while in safe mode. Use Malwarebytes free or Adwcleaner or Hitman to clean the system. If that does the trick, manually create a system restore point that you know is clean after the system is to your satisfaction.

12 more replies
Relevance 52.48%

I detected various trojans etc so ran a registry cleaner but some still remained so i booted into safe mode and ran a deep scan with Dr Web and cured issues but suddenly i got a blue error screen "crql not less or equal",that old chestnut!
My system would not boot into Windows (Xp prof. corporate) and after lots of various attempts decided yo try and "repair" Windows via the installation disk option.So off it went,copying all files etc. but then only got to a certain point and was halted with a message stating Disk 0 at i.d. 0 at bus 0 and something atapi
(sorry,it moved so quick i didnt write it all down but there was not much more than ive mentioned).Again after several attempts with nothing i started taking drastic action and decided to just try a full re-install after formating the drive but again it would not let me.
To cut a long story short,my pc boots up and gets to the initial "Windows Xp" loading bar but then freezes and reboots and does this in and endless cycle! I cant reinstall Cause it wont let me and there seems to be nothing in the Bios menu that can help???
I dont know what else i can try,how do i get Windows running again if it point blank refuses? I know it is only through stupidity that i have erased something important but i dont understand why it would prevent me doing a restore/repair or full reinstallation and i have had a fair few problems over the years but nothing like this,that simply prevents me from accessing an... Read more

Answer:After safe mode Dr Web check,cannot boot Xp even in Safe mode!

P.s. I cannot even use the "repair" option in windows,i believe this to be the recovery console.Is that correct?
If it is correct then how on earth can i gain access to my Pc if eveything i do is ignored and it just rotates in this endless cycle of resetting.
Somebody must have had this problem at some point,surely?
I dont think its hardware as it started to blue screen after my system virus scan with Dr Web in safe mode.
Cheers.
 

2 more replies
Relevance 52.48%

I'm trying to run some repair tools in Safe Mode to fix a busted Windows Update. Only to discover that safe mode on a Lenovo G780 doesn't list "All" applications in all applications, doesn't have my actual desktop shortcuts on the desktop, doesn't show anything in the download folder.  Basically all it has is the bloatware the computer came with. Even McAffee, that I purged from the systems a while back, is there installed in safe mode. But not the current AV, nor any other program installed. Not even via command prompt.  So this leads me to conclude that safe mode on the system is actually some alternate boot image, or strange user account or something. It's basically totally and completely useless. You can play solitare in safe mode, but not run virus or malware scanners, or repair tools. Brilliant!  Any way to get to the REAL safe mode and use actual tools?

Answer:Safe Mode isn't really safe mode on Lenovo G780?

Hi jowilhnson, welcome to the forum.
 
     Please see these MS pages to know what loads in "safe mode"
 
Win 7
 
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows...
 
"Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you're using."
 
Win 8.1
 
http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
 
"If you have a problem with your PC, you can troubleshoot by starting it in safe mode. Safe mode starts Windows with a minimal set of drivers and services. If a problem doesn't reappear when you start your PC in safe mode, you can eliminate the default settings and basic device drivers and services as possible causes. There are three different safe mode options:
Enable Safe Mode: Starts Windows with a minimal set of drivers and services.
Enable Safe Mode with Networking: Starts Windows in safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
Enable Safe Mode with Command Prompt: Starts Windows in safe mode with a Command Prompt window instead of the usual Windows interface. This option is intended for IT pros and system admins."
Cheers
 
DragonRider

2 more replies
Relevance 50.43%

Hi Guys n Gals , my name is Mark , I have an old laptop I am trying to get going , it has never been online so its not a virus , and the cd rom does not work , and no USB sticks have ever been plugged in all it was used for was playing bejewelled the old one and windows games , not pad then kind of tasks . once shut down moved to new place , unpacked , it would not start up.   by this I mean ... the screen that shows up usually after a improper shut-down .... Safe mode ... Safe mode with network .....  Start windows normally ... that screen ...  no matter what selection I make it freezes there and I can no longer move or alt cntr del ... nothing works .. power button . also Its so old i cant figure out how to boot from usb as the cd rom does not work . I thought I figured it out , but it kept bringing me to the start normally ,,, safe mode ... safe mode with networking screen after 15 seconds of black screen , witch is the reason I thought it was working because generally when I boot other computers the screen goes black with the small flashing thing in the corner for a few seconds then starts booting windows , but this one brought me to that menu then froze ...   
here is a pic of the menu i speak of .
 
 ACER TravelMate 4000 Series MODEL: ZL1
 
Thank you very much for reading my post!
 
Mark

More replies
Relevance 50.43%

I was browsing the internet the other day when I clicked on a link and my computer shut down. I immediately knew it was a bad link. My computer rebooted and it wouldn't let me on IE after that at all. I then did a restore to the previous day. I was about to get online so I went and downloaded Kaspersky IS and scanned my computer. My laptop messed up and rebooted itself. Then got Anti-Malware Bytes in Safe mode and ran a scan, still had issues Kaspersky not running right and my computer freezing after just a couple of minutes. Went back and did a restore again to the same spot and this time said forget Kaspersky and jsut did AMWB. It showed my computer is clean, yet about 2 minutes after booting, my computer reboots and the safe mode option pops up. I can run ok in safe mode but cannot get it to work in normal mode. I did trend micros housecall and another online scanner and all say my computer is clean. Yet, when I start IE, I am redirected on every link I click to scour..... or another site with links on it. Any help is greatly appreciated, as well as a recommendation for a better Anti-virus. I jsut had McAfree that came with this laptop. Thanks!






.
DDS (Ver_2011-06-12.02) - NTFSx86 NETWORK
Internet Explorer: 8.0.7600.16385
Run by Mom at 1631 on 2011-06-20
Microsoft Windows 7 Home Premium 6.1.7600.0.1252.1.1033.18.2812.1805 [GMT -4:00]
.
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes =... Read more

Answer:Only runs in safe, redirects even in safe, reboots in normal mode..no virus' found

oh and Malwarebytes did block a 91-207-192-22 port 49179 svchost.exe

9 more replies
Relevance 49.61%

Just recently started to get BSOD in normal mode, error was registry error. Systems run fine in safe and safe w/networking. I have run chkdsk, anti-malware, CCleaner to fix registry issues, and have not detected any virus. I am lost. Can you help me?
Thank you

More replies
Relevance 49.61%
Question: Solved: agpCPQ.sys

Here is what happens:

My computer starts up. It goes to the gateway screen where I have options to press f2 and f10. Then it goes to the screen that I don't know what to call where I have an option to press f11...something I'd like to avoid doing if possible. Then it goes to a new screen saying that windows couldn't start up and gives me 5 options: Safe mode, Safe mode with Networking, Safe mode with Command Prompt, Last known settings that worked, and Start Windows Normally. Last known settings that worked and Start Windows Normally both go to the windows loading screen, which loads for a bit, and then my computer resets. All three Safe Modes start running off system32 directories and stop at system32\Drives\agpCPQ.sys before my computer resets.

I've tried messing around with the F2 BIOS settings and such, but they didn't really do anything, so I set them back to what they were.

I'd like to avoid pressing that f11 and wiping my computer if possible. Unless my computer automatically backs up all my files, I'll have to re-download everything. Not that I'd know to install a back up, even if I had one.

How do I fix this?
 

Answer:Solved: agpCPQ.sys

16 more replies
Relevance 49.2%

Hi,

I got win 7 home premium 64 bit on an i3 laptop. My system worked fine until today morning.

The problem is this;
When I boot the system in normal mode, I get to the part where I need to enter my password to login. Once i do that, all I get is a black screen with the mouse pointer that moves about normally. I've waited for the normal desktop environment to appear (ie icons and taskbar) but this doesn't happen (btw, my desktop background color is always black).
The system boots perfectly in safe mode.

Yesterday was the first time in over a year I used utorrent. I used to get the BSOD when I used to use it. I couldn't rectify the problem and hence had stopped using it. It worked fine yesterday though.

Any idea whats happening and how I could fix the problem?

Answer:Windows doesn't login properly in normal mode but fine in safe mode

I've tried running SFC /SCANNOW a couple of times but I keep getting a message that there may be corrupted files. I also created the sfcdetails.txt file.
Going to try the system restore option now

6 more replies
Relevance 49.2%

Hi,

About two months ago my HP Pavilion 6654y Win7, 8GB, etc.,
started running extremely slowly in Normal Mode. It takes several minutes to respond to mouse clicks, etc.
Basically, it just hangs. But it runs "ok" for a minute or two while still rebooting.

In Safe mode it runs just fine.
I've tried everything I can think of to narrow down the problem, to no avail,
including numerous scans such as AVG, Malwarebytes, Trend Micro Housecall.
Installed UnHackMe to check for rootkits. Even got Reimage and ran it several times.

I've used CCleaner to clean things up, and also to clear out Startup programs
and disable most scheduled tasks, as follows,
(though it is confusing to me since I still see some of the process when started up in Normal Mode):

Yes HKLM:Run StartCCC Advanced Micro Devices, Inc. "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun
Yes HKLM:Run KillProcess Orange Lamp Software Solutions "C:\Program Files (x86)\KillProcess\KillProcess.exe"
Yes HKCU:Run HydraVisionDesktopManager AMD "C:\Program Files (x86)\ATI Technologies\HydraVision\HydraDM.exe"
No Startup User Stickies.lnk Zhorn Software C:\PROGRA~2\Stickies\stickies.exe
No Startup User OpenOffice.org 3.3.lnk C:\PROGRA~2\OPENOF~1.ORG\program\QUICKS~1.EXE
No Startup User 1-Click Answers.lnk Answers Corporation C:\PROGRA~2\1-CLI... Read more

Answer:Win7 fine in Safe Mode, extremely slow responses in Normal Mode.

Please run Minitoolbox and include the List Installed Programs. Check HP desktop if it comes with a diagnostic test within windows or BIOS utility for memory sticks and hard drive and try running the complete test. Please post back if there are no such features as they would be provided. Try also doing some house cleaning for some dust and bunnies to make sure thermal events is not contributing to the problem.

11 more replies
Relevance 49.2%

Hi guys,
it is my first time to join to this forum. I really need the solution of my laptop Problem. I Have my
Gateway EC38 and it has been
freezing while I am using in normal mode.
But in Safe Mode works well. I tried uninstall my video card driver and also my sound card but nothing works. I also do
sfc/scannow in safe mode/safe mode with command prompt, but yet it says I have corrupted file but he doesnt show any file. I check in log file but I dont understand much.
Im always maintaining my laptop hardware status specially ventilation and change every year the cpu thermal gel.
Please help me find solutions to this kind of problem.
My Laptop Details:
Windows 7 64bit
x64 Base processor
factory OS windows Vista
Processor: Intel Centrino 2

More replies
Relevance 49.2%

Hello,
 
OS : WIndows XP SP3
 
My computer (actually on loan from my mother in law!) is taking ages to start and when it does, it is very slow to respond and even freezes. Eventually an Avast alert pops up and tells me it detected a rootkit called "Catchme". I didn't try to delete it, I don't know if I should have or even if Avast was right.
The PC was already slow when I first got it. I ran Malwarebytes before and it found a trojan.agent that was apparently deleted. I also ran JRT that found bad things too (tell me if you need the log).
When I run in Safe mode, the PC seems OK, more responsive.
 
Anyone to help me?
 
Thank you.

Answer:PC slow in normal mode, OK in safe mode, Catchme rootkit detected by Avast?

Hi,
 
I turned PC on this morning, it was still very slow to start, but the Avast message about the rootkit didn't come up this time! PC was still slow to respond though.
I decided to run AdwCleaner (saved on to USB key from my laptop and copied then on to the PC) just to see and it found 9 "bad" registry keys. I cleaned them and restarted the PC as prompted. PC seems a bit faster to repond now. I also ran Malwarebytes (quick scan) which didn't find anything.
Still think something is not right, can somebody help me check for rootkit or anything else please? Thank you

32 more replies
Relevance 49.2%

After upgrading to SP2 about a month ago so I could take finals on my computer at school, i noticed that my computer wouldn't boot up in safe mode (i just get a blank dark screen and i can hear the computer doing something but giving it a reasonable amount of time it doesn't progress from that screen). It didn't concern me because normal mode was working and i was able to take my tests. But now I want to get to the bottom of this. I delayed getting sp2 because i had a feeling it would mess up my computer. (i've had other problems too with visual skins but i was able to resolve those).If it matters, i ran a scan of my system with spyware doctor and it said i had a trojan.dialer and needed to boot in safemode to get rid of it. When I tried, it wouldn't load. Oh, btw, any way to get rid of that trojan.dialer without using safemode?

Answer:Windows Xp Home, After Sp2, Safe Mode Doesn't Work, Normal Mode's Fine?

Try running Ewido online scan and post the results overhere.

6 more replies
Relevance 49.2%

Hello, I'm hoping someone would be able to help me resolve this so that I can avoid having to reinstall Windows. Here's the situation: my laptop suddenly cannot boot up anymore; it usually hangs when the "Please wait..." dialog shows up with the text "Windows is starting up...", but sometimes it goes as far as the login prompt, then hangs after I enter my credentials and press Enter. When it hangs I cannot even move my mouse cursor. I can only think of two things I did out of the ordinary that created this mess:
I installed the driver for the Turtle Beach AudioAdvantage Micro USB stick audio card before my PC started hanging. However, after I installed the driver I was forced to reboot, and my computer rebooted just fine.
I closed my laptop's lid to put it in sleep mode while MyDefrag (formerly JkDefrag) was running. I have done this in the past without any issues, but this time when I exited sleep mode my computer was hanging, so I forced a reboot. This trouble started after I rebooted.

I am able to boot up in Safe Mode, but not Safe Mode with Networking, which leads me to think that maybe some network related drivers got corrupted. Some more info on my setup:
I have Windows XP Pro SP3 installed (v5.1.2600)
I have Avira AntiVir and Comodo Firewall installed
I am not using Hibernation
Audio: SigmaTel STAC9751
Graphics: Intel 945 GMS
Chipset: Mobile Intel 945 GMS Express
Netcard: Realtek RTL8101L
Wifi: Intel PRO/wireless 3945

Update 1: ... Read more

More replies
Relevance 49.2%

Some photos and mail seen only SAFE mode - - but not regular mode in BOTH Internet explorer AND Firefox. Hi for some reason I am no longer able to look at Just SOME photos on web sites on this One Win7 computer, nor See my email in Yahoo main INBOX , , , unless I am in SAFE mode. Not sure how to tell what I did wrong or if missing dlls or other settings. But does work ok just in SAFE mode. However I also get the Blue screen of death once in a while. Below is what I got when doing the "hijack scan" Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 4:09:06 PM, on 4/23/2013 Platform: Unknown Windows (WinNT 6.01.3505 SP1) MSIE: Internet Explorer v10.0 (10.00.9200.16537) Boot mode: Normal Running processes: C:\Program Files (x86)\ASUS\AI Suite II\AsRoutineController.exe C:\Program Files (x86)\ASUS\ASUS Instant On\AsInstantOn.exe C:\ProgramData\FLEXnet\Connect\11\ISUSPM.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\Users\JIMMY\AppData\Roaming\SearchProtect\bin\cltmng.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\UPS\WSTD\WSTDMessaging.exe C:\Program Files (x86)\ASUS\AI Manager\AsShellApplication.exe C:\Program Files\TRENDnet\TEW-641PC_TEW-643PI\WlanCU.exe C:\Program Files (x86)\ASUS\ASUS Easy Update\ALU.exe C:\Program Files (x86)\ASUS\AI Suite II\EPU\EPUHelp.exe C:\UPS\WSTD\UPSNA1Msgr.exe C:\Program Files (x86)\Nuance\PDF Viewer Plus\pdfPro5Hook.exe C:\Program Files (x86)\Nuance\PaperPort\pptd40nt.exe C:\Program Files (x86)\ControlCent... Read more

More replies
Relevance 49.2%

Hi
 
I am looking for help 
 
My windows 7 start in normal mode is very slow.  System is in a loop or is hanging waiting for the hard disk to be free.  The hard disk indicator light is on  all the time ... 
When I start the system in safe mode with networking, the system is fine and nothing is holding the hard disk anymore.
 
I ran minitoolbox and got the following error indications 
 
MiniToolBox by Farbar  Version: 20-06-2014
Ran by Toshiba (administrator) on 21-06-2014 at 22:59:54
Running from "C:\Users\Toshiba\Downloads"
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Network
***************************************************************************
 
========================= Devices: ================================
 
Name: Security Processor Loader Driver
Description: Security Processor Loader Driver
Class Guid: {8ECC055D-047F-11D1-A537-0000F8753ED1}
Manufacturer: 
Service: spldr
Problem: : This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
Resolution: The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed.
Devices stay in this state if they have been prepared for removal.
After you remove the device, this error disappears.Remove the device, and this error should be resolved.
 
Name: Microsoft Teredo Tunneling Adapter
Description: Microsoft Teredo Tunneling Adapt... Read more

Answer:Windows 7 very slow in normal mode, runs fine in safe mode with networking

Could have crap ton of stuff starting up with windows.
perhaps corupt driver or installed the wrong driver.

2 more replies
Relevance 49.2%

I need some help please as I do not know where to start.

I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work.

Now, it's happened again without me doing a Windows Update and I cannot get into safe mode.

I am really sorry but I cannot even follow the BSOD instructions to run a diagnostic tool because I literally cannot get into anything to run the diagnostics.

Can anyone offer me advice?

Answer:Windows Normal Mode Crashes to BSOD and Safe Mode doesn't load

We can offer the best assistance if you would upload the following information
http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Relevance 49.2%

I am running using Dell Inspiron with windows vista. A couple days ago, I got on the computer and then it froze, at fist the program I was using froze, and then I got a circle next to the arrow, but could still move the arrow, then the arrow stops moving. CTL ALT DEL does not work, so i must do a hard reboot, try to boot in safe mode and all the files come up but then it goes no where and the computer either restarts or I reboot it.

I have run all types of tests and nothing comes up. Today I got the blue screen of death twice, but after reboot, it goes away. I do not have a Boot Disk and have tried all the tests in the F8 command. Currently I am running an expanded memory test, but figured I would get this out there before I go insane.

Any ideas would be MUCH appreciated.
 

More replies
Relevance 49.2%

Hi, All of a sudden a day before, my computer froze and when restarted it started exhibiting horrendous symptoms-1. windows logo appear,then2. blank screen and no cursor login etc nothing display just sits thereAfter that, I tried to do startup repair but failed.Coming over to Safe Mode it is working fine.I also tried bunch of repairs from there still nothingused the clean boot from msconfig to see if any software causing issue or conflicts and did a system restore, still nothing.checked device manager and there is no exclamation point either that may depict hardware failure.My recent activity-installed "Advanced System care 9" 2 days back but have now removed using safe mode.1 more point it has been a month since my primary HDD is showing SMART error.but if safe mode is working can't we get normal mode backup and running.Please help me out of this conundrum, Any help would be sincerely appreciated.possible options I have in my mind-1.get new HDD and reinstall os2.format existing HDD and install fresh copy but doubt if this issue might returnreadily looking out for other options and would prefer rectifying old one first so that I can avoid a long tedious process of reinstalling everything from scratch.Sincere thanks to any responses.

More replies
Relevance 49.2%

Hello, the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.

The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.

So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.

If you can help, thanks!! I have to work on the Win7 computer from LogMeIn, and may have to get around in safe mode there.

Answer:Win7 runs extremely slow in normal mode, but nicely in safe mode

I suggest you wait for a response from the malware specialists before looking elsewhere.

2 more replies
Relevance 49.2%

Hello all
First time poster with problem after peforming sys restore on win7 pro 64bit.
Was troubleshooting a problem w/taskbar not staying hidden, tried to restore back 24hrs to when a java update occured. Restore seemed to proceed normally, but upon restart, it boots normally to just before the login screen would appear, then the screen goes black and all that is visible is the cursor , which I can still move.
But that's as far as it gets. Trying to boot in safe mode, or repair mode ends exact same way - can't boot in to try anything
Any ideas??

Answer:Black screen at boot with safe mode, system restore, or repair mode

no one has any suggestions? I also triedtoboot to my win7 dvd to see if I could attempt to repair but again, it only gets thru the windows bootscreen then goes black with only the mouse cursor showing as before.

9 more replies
Relevance 49.2%

First i will describe the problem.My computer suddenly told me that it was infected with spyware, now i recognized it as a fake indicator because it kept trying to force me to download a certain "anti virus software" so i put 2 and 2 together and figure i had a virus. so I immediately used Avast! (my anti virus program) to run a full thorough scan of my system. It came up with multiple threats (it told me my startup/memory was infected and it was unsafe to continue using my computer) it recommended restarting and running scan on boot to delete threats. So i restart and i get a blue screen. Then the computer tries to restart and it just loops back into the blue screen every time.This is what i think the problem is. Something (virus/spyware/malware) is trying to boot up on startup. My computer is crashing because of this. The only way to delete is  to run a boot scan. but i cannot reboot in normal mode, only in safe mode. Avast requires a reboot to delete the files. (and yes ive tried manually delete the infested file it just reapears) (below is everything ive tried)Now heres what ive tried to do: - I started in smart mode. Ran avast there. it does the same, finds a threat asks me to reboot which brings me back to the blue screen. - I ran msconfig, disabled all startup things in the startup tab and then tried a reboot.no success, (still got the blue screen)- so then in safemode i installed malwarebytes (recommended by a friend) and ran that, it found 20 thre... Read more

Answer:Computer Wont Start in Normal mode, only Safe Mode. Spyware infection. Help plz!

Use msconfig and enable all items in the startup tab.Please print these instructions as they will be needed later when Internet access is not available. Download SDFix by AndyManchesta and save it to your desktop. http://rapidshare.com/files/156236231/SDFix.exe.htmlWhen using this tool, you must use the Administrator's account or an account with Administrative rightsDouble click SDFix.exe and it will extract the files to %systemdrive%(this is the drive that contains the Windows Directory, typically C:\SDFix).DO NOT use it just yet..Reboot your computer in Safe Mode using the F8 method. To do this, restart your computer and after hearing your computer beep once during startup (but before the Windows icon appears) press the F8 key repeatedly. A menu will appear with several options. Use the arrow keys to navigate and select the option to run Windows in "Safe Mode". Open the SDFix folder and double click RunThis.bat to start the script.Type Y to begin the cleanup process.It will remove any Trojan Services or Registry Entries found then prompt you to press any key to Reboot.Press any Key and it will restart the PC.When the PC restarts, the Fixtool will run again and complete the removal process then display Finished, press any key to end the script and load your desktop icons.Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt.Copy and paste the contents of the results file Report.txt in your ... Read more

14 more replies
Relevance 49.2%

Hello.I have reached the conclusion that I need to format my laptop: acer travelmate 2414wlmi.and reinstall windows xp, however I am not sure if this is possible as the os does not load in either normal mode or safe mode.I picked up a virus a few days ago that redirected me repeatedly to *Blocked Russian URL*, a problem I've seen that others have had. But now that I have access to an external hard drive to save my work, windows does not get past the welcome screen in normal mode, and is only usable for about a second in safe mode. Is there anything I can do to save my work?Any help would be great. ThanksEd

Answer:Windows does not load in safe mode or normal mode. Need to save work and format.

Depending on the type of hard drive you have you can use one of these adapters to connect to a friends computer and get your data off.  If you do make sure your friend runs a scan on your drive before removing any data.Good luck!Alan <><  [attachment deleted by admin]

11 more replies
Relevance 49.2%

laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown.

Now getting a BSOD error 50.

any help?

Answer:BSOD BCCode 50. freezes in normal mode, works fine in safe mode

Code:
BugCheck 50, {fffff80040f9e3b0, 1, fffff80000b9a1aa, 5}

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Could not read faulting driver name
Probably caused by : ntoskrnl.exe ( nt_fffff80000b95000+51aa )

Followup: MachineOwner
---------
Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made ... Read more

9 more replies
Relevance 49.2%

Please help!  Over the past week or two my computer has been running slower and slower.  Then lost the ability to download anything unless in safe mode.  Now when opening computer in normal mode get nothing but black screen.  Think I got something when my antivirus software lapsed and I wasn't protected for a bit?
 
Running Windows 7 64
 
Tried running Malewarebytes, Avast, SuperAntiSpyware, Microsoft Defender, sf scan, CCleaner and nothing has helped.  Everything comes back fine. 
 
I'm not very computer savy but from what I have been reading you all can help!  Much appreciated and many thanks for any assistance. 
 
 

Answer:I'm lost. Only open in safe mode. Normal mode give black screen.

Hello ,what is the sf scanBoot to safe mode with Networking and try running these......MiniToolBoxPlease download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run. Note: When using "Reset FF Proxy Settings" option Firefox should be closed.TDSSKillerDownload TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is required, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here.AdwCleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double clic... Read more

3 more replies
Relevance 49.2%

PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My trading platform works perfectly in regular mode so I know my connection is ok. I have done HijackThis and have come up with this report..

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:19:52 PM, on 10/10/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Safe mode with network support
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Big Wayne\Desktop\HijackThis.exe
O23 - Service: Automatic LiveUpdate Scheduler - Symantec Corporation - C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
O23 - Service: Canon Camera Access Library 8 (CCALib8) - Canon Inc. - C:\Program Files\Canon\CAL\CALMAIN.exe
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Internet Security Password Validation (ccISPwdSvc) - Symantec Corporation - C:\Program Files\Norton Internet Security\ccPwdSvc.exe
O23 - Service: Symantec Network Proxy (ccProxy) - Symantec Corporation - C:\Program Fil... Read more

Answer:[SOLVED] Internet explorer will not work in regular mode, only safe mode w/networking

Quote:





Originally Posted by wleger2981


PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My Norton is out of date as well, but as soon as I get back up and running I will install a newer version..ANy help on this matter is greatly appreciated..




Please do not post your Hijack this logs here. Due to Forum Rules we cannot assist in malware removal here. Have you tried a different browser (Chrome, Firefox etc)? When you say IE only works in Safe Mode with Networking, Do you mean you boot the computer normally and use IE (safe mode) or are you booting the computer into Safe Mode with Networking? In other words you can't boot normally?
If you feel you are infected, please click on the Virus/Trojan link in my signature and post there for more help.

4 more replies
Relevance 49.2%

So my laptop only starts up in safe mode and when I try to access it through normal startup, a blue screen appears for a short amount of time and then attempts to startup again going on and on in a never ending cycle.

However, I got it running on safe mode and ran Malwaebytes Anti-Malware on safe mode (with networking). However, it didn't pick up anything wrong. What can I do to fix this???

Answer:Vista only starts in Safe Mode and blue screen appears in normal mode

Hi There ghostOnthestage!For a rather lengthy but very informative article on stop errors and what may possibly cause them go here: http://www.updatexp.com/stop-messages.html Perhaps this will help a bit until someone more knowledgeable on this subject can come along. Good luck!

1 more replies
Relevance 49.2%

There is no malicious software.I have gone through Malwarebytes,TDSSKiller,Kaspersky,etc.Nothing was found.
It doesn't entirely freeze.I can move the cursor which usually is a blue circle.Sometimes more things like highlight icons w/ the cursor or the clock keeps going.
Sometimes when I press ctrl+alt+del and open task manager,the programs that didn't open when I clicked on them will open up.Most times pressing ctrl+alt+del does nothing though.
It works fine in Safe Mode and Safe Mode with Networking.I have disabled all start ups and every service except Microsoft ones and restarted in Normal mode.Still the same problem.
I used checkdisk and it said nothing is wrong.
There are random times where it works fine.No specific time of day.It just happens.Most times it is this way though.

Answer:Laptop only works in safe mode.Hangs w/ blue circle in Normal mode.

Did you disable the startup items and services in Safe Mode, and then restart in normal mode?
 
Essentially what you are trying to do is a Clean Boot, this has to be performed in normal mode.
 
 
 
***This is a diagnotic tool for Windows Vista, Windows 7, and Windows 8.  This will not repair your computer, but it may point to where the problem lies so that a repair can be made.***
 
Warning:  Disabling items in Services or Startup may leave your anitivius disabled until the process is ended.  For this reason I would suggest that you perform this process off line.
 
Step 1
 
(1)  Click on the Start orb , then type msconfig.exe in the Search programs and files box.  
 
(2)  When msconfig is seen in the pane above the search box and under Programs, right click on it, then click on Run as administrator.
 

 
If you are prompted for an administrator password or for confirmation, you should enter the password or provide confirmation. 
 
Step 2
 
(1)  Click on the General tab.   
 
(2)  Click the Selective startup option. 
 
(3)  Remove the check mark in the Load startup items  check box. 
 

 
Step 3
 
(1)  Click on the Services tab. 
 
(2)  Place a check mark in the Hide all Microsoft services check box, this will remove the Microsoft Services from the list but will still be running. 
 
(3) ... Read more

18 more replies
Relevance 49.2%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 2549 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 112971 MB, Free - 52348 MB;
Motherboard: TOSHIBA, IAKAA
Antivirus: AVG AntiVirus Free Edition 2015, Updated and Enabled

I can no longer see my external monitor. I have hooked it up because my laptop monitor no longer has a functioning backlite/

In the past when this happens I used system restore, but now when I try that it says there is no restore point.

HELP!!
 

Answer:Solved: External monitor black in normal mode but visible in safe mode

The external monitor toggle was somehow unset. fn f5 fixed it.
 

1 more replies
Relevance 49.2%

I have ran multiple malware removal programs, including hijack this. I have a clean network connection in safe made. Something is blocking the lan network connection in Normal Mode.

Here are a few log files

View attachment mbam-log-2010-09-22 (22-03-03).txt



View attachment hijackthis.log
 

Answer:Virus Removal (no network connection in normal mode) only in safe mode))

You did not complete all of the below:

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Pleases follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide


and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.


After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:


If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to lo... Read more

14 more replies
Relevance 49.2%

Hello,

From last 2 days I am facing constant crash in windows 7 normal mode (Lenovo notebook G580). but when I do boot the pc in safe mode with networking, crash never occurs. I am posting this thread in safe mode only from the same laptop. I have dmp file generated using verifier. and the same with provided exe here. I will try to upload both. I think some driver is causing the crash but can't find which one. please help to resolve this as I hope must not be the hard disk issue.

Answer:PC working fine in safe mode but crashes (BSOD) in normal mode

  
Quote: Originally Posted by amitshahc


I think some driver is causing the crash but can't find which one.


The thread title gives the exact impression. And it was a good step to enable verifier.

Now disable verifier.

Then ....
Update the SplitCam product: SplitCam free webcam software for video streaming and adding cool webcam effects

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus (MSC) and the touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Then run the laptop normally. Let us see any further BSOD crash dump after doing it.

1 more replies
Relevance 49.2%

I have been having problems opening any files or using Internet when booting up in normal Mode, system is slow and eventually hangs. I have run all of the virus SW, and even some driver repair programs. Have tried recovering to earlier date, still problems. I don't want to do a total recovery and re-apply W7. Any suggestions on how to detect whether I have another driver corrupt, etc. ?

Answer:SYstem hangs when opening apps in Normal Mode, OK in Safe Mode

Boot into Safe Mode. This will write a log file Ntbtlog.txt in the Windows folder. If any drivers failed to load they will be listed there. You can post the file if you like.

1 more replies
Relevance 49.2%

My computer was running slow with the HD churning away, so I ran the anti-ware (Malwarebytes and Trend Micro) and found no infections.

Then I ran defrag, but had only 5% free space, so I deleted and moved files and got to 15%, but defrag runs for 10 minutes and declares itself done, but it looks like only about 20% of the drive is getting defragged and the rest is badly fragmented.

I ran CCleaner, chkdsk /r & /f, and went to run defrag in safe mode only to find trying to boot in safe mode causes the dreaded BSoD! But WinXP SP3 runs fine in normal mode!

Stop: 0X00000007E (0XC0000005, 0X80537009, 0XF7C5E3E0, 0XF7C5E0DC)

No hardware changes in more than a year, the last time I ran in safe mode was a couple of months ago to get rid of a nasty Trojan.

So, why will defrag not finish? Why does safe mode cause the BSoD?

FWIW:clearing up the HD space had reduced the HD churn.

Additionally:
I ran chkdsk /r in the recovery console and System File Checker, with no apparent change.

Results of chkdsk from Event Viewer:

CHKDSK is verifying Usn Journal...
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
Free space verification is complete.
31768537 KB total disk space.
25785876 KB in 98131 files.
35884 KB in 11699 indexes.
0 KB in bad sectors.
364105 KB in use by the system.
65536 KB occupied by the log file.
5582672 KB available on disk.
4096 bytes in each alloc... Read more

Answer:Safe mode causes BSOD; WinXP OK in normal mode; defrag not completing....

Running processes can cause this like Toolbars if you have toolbars I'd say remove them completely as they will conflict with I.E.'s toolbar as with other programs like defrag, ( to remove a program make sure it's not running then click Start/ Control Panel / Add-Remove Programs then restart the pc Always restart the pc after installing , removing , or updateing a program ). Then disconnect from the internet and right click on any icons next to the clock and click exit or end to stop them till your done doing the defrag. Then run cleanup disk and try to defrag. If no joy please post a HiJackThis log so we can see if there's other issues http://forums.techguy.org/malware-removal-hijackthis-logs/622404-please-read-here-first-before.html
 

1 more replies
Relevance 49.2%

Hi All: I've been smashing my head against the wall with this one. I have uninstalled ALL unnecessary applications I could find. Basically all that is left is Windows XP, Drivers and Patches in Add/Remove Programs. I have removed the wireless driver, downloaded a newer one and installed it, still nothing. I have tried it using no Wireless Security on the AP, and also using WPA, and wouldn't work with either in Normal Mode, but worked with both in Safe Mode. I ran a virus and spyware check (before uninstalling Norton), and it came out clean. The weirest thing is, sometimes it does connect and get an IP in Normal Mode, but when I run a ping to my local gateway, half the packets are lost (timeout), and the ones that do reply I see a response time ranging from 2ms to 5000ms with no other traffic. I have no idea what can be causing this. Any help would be greatly appreciated. If all else fails, I will resort to formatting it and installing WinXP from scratch, since I doubt it's hardware.

More replies
Relevance 49.2%

Hi,
I am using Compaq Pressario P4 PC with ?Windows XP Home edition? Operating System installed on it. The issue that I am facing is as follows:
- One day, audio was not working with PC. My hard disk drive was close to full, so, I thought of uninstalling couple of unnecessary programs. While doing so, I stopped uninstallation in middle by pressing back button, then, uninstallation process hanged. After that I also tried rollback of soundMAX digital audio driver and again I selected back button and this also hanged. Please note that I had inserted the restore CD in upper CD drive to search the audio driver file. Then, I started the computer through hard reset. After that first it went in restore mode, exited that, Windows Logo came and after that there was just a blinking cursor at top left corner and nothing would happen after that.
- Then I called one PC technician for data recovery from my hard drive. He took my hardrive out of the PC and connected it via USB adaptor to my laptop. The hard drive could be detected and we started data copying from hard drive to laptop. However after every 3-4 minutes, hard drive used to hang and then we had to take out the hard drive cable, again reconnect. This we repeated multiple times to recover the important data from my hard drive.
- After that, hard drive was re-inserted in the PC. Since, after restart PC was not booting up (Windows Logo came and after that there was just a blinking cursor at top left corner ... Read more

Answer:PC doesn't boot in normal mode even after OS reinstallation,though,boots in safe mode

Yes, the hard drive may have become faulty and unreliable and therfore will soon fail completely. For confirmation, test it with the drive maker's diagnostic software for DOS.
The links are here: Start > All Programs > Accessories > System Tools

In Safe Mode, no third-party drivers are loaded. In Normal Mode, all those extra drivers being accessed on an already flakey drive is causing it to crash.

4 more replies
Relevance 49.2%

Hello everyone.  I am trying to fix my mom's computer but have so far been unable.  The laptop is running but it is incredibly slow.  When I first got on it a bunch of pop ops took over the screen.  The computer would randomly go to other sites on it's own.  It would go to a search sight called "clarosearch".  Worst of all, it's incredibly slow.  For example, from the desktop, it take about 45 seconds for the IE window to open when I click on the icon.  It takes about that long to navigate to a page and so fourth. I downloaded and ran a registry cleaner, spybot search and destroy, malwarebytes, and ad-aware.  These found a bunch of problems and cleaned some up, I guess.  The pop ups are gond and so is the strange search site, but the computer is still running just as slow.  It's a paperweight.  Getting another computer isn't really an option right now as my mom is unemployed and we're actually trying to get her resume online but we can't even do that right now with the way the laptop is acting.  I downloaded hijackthis and ran a scan.  Here is the log.    Oh, and as the subject says, the computer runs fast and fine in safe mode.  Please let me know if there is any other info that is needed as I'm not sure what to provide.  Thank you in advance for any help or suggestions you can provide.  Logfile of Trend Micro HijackThis v2.0.4Scan saved at 6:26:57 PM, on 4/26/2014Pl... Read more

Answer:Windows XP Laptop very slow in normal mode but fine in safe mode

Hello scoobyjax,my name is Jo and I will help you with your computer problems.Please follow these guidelines:Logs can take a while to research, so please be patient.Read and follow the instructions in the sequence they are posted.print or copy & save instructions.back up all your private data / important files on another (external) drive before using our tools.Do not install / uninstall any applications, unless otherwise instructed.Use only that tools you have been instructed to use.Copy and Paste the log files inside your post, unless otherwise instructed.Ask for clarification, if you have any questions. Stay with this topic til you get the all clean post.My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.***1. Download Security Check by screen317 from here or here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.Vista / Windows 7/8 users right-click and select Run As Administrator.A Notepad document should open automatically called checkup.txt; please post the contents of that document.***2. Download OTL to your desktop.Double click on the icon to run it.Vista / Windows 7/8 users right-click and select Run As Administrator.Make sure all other windows are closed and to let it run uninterrupted.When the window appears, underneath Output at the top change it to Minimal Output.Check the boxes beside LOP Check and Purity Check... Read more

3 more replies
Relevance 49.2%

OK ... Not sure what caused this but ....

When I got home, computer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.

Booted in safe mode with networking. Opened firefox in safe mode and it was really funky. Could not get to techguy.org. Showed some porn. Basically, it was highjacked.

Ran hijack this (probably an older version) which I then copied onto flash drive and copied onto my laptop for posting here.

Need help, thought I'm concerned that I won't be able to download any programs you suggest onto the affected computer.

Thanks,
Dave
Logfile of HijackThis v1.99.1
Scan saved at 9:42:33 PM, on 12/23/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Hijackthis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://finance.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = h... Read more

Answer:Virus - browser issues in safe mode/hangs in normal mode

7 more replies
Relevance 49.2%

Lenovo Laptop

Windows starts normally, but after login displays a black screen with only cursor showing. Mouse is okay, ctrl-alt-del opens a window and task manager works okay.

Safe mode with networking works normally.

Restored from to a restore point prior to an install of "proformax Cleaner", no change to behavior.

Used task manager to take note of services running in safe mode.

Restarted in normal mode and used task manager to stop all services not running in Safe Mode.
Stopping the "Group Policy Client" caused the desktop to reappear. However on restart in Normal mode the "Group Policy Client" had the service's stop etc choices greyed out.

Running MSconfig to eliminate all startup programs and most services, the "Group Policy Client" choice rechecks the box when "Apply" is clicked.

My guess is that a virus changed a registry entry to prevent the desktop from being displayed. Any suggestions as to how to proceed would certainly be appreciated at this point.

Answer:Win7 Prof no desktop or icons in normal mode; safe mode okay

Hello WWilliam50 and welcome to Seven Forums.

Have you run a full scan with your installed anti-virus of choice? Even if you AV comes back "no malware found" it wouldn't hurt to run some additional free on-demand scanners. (No AV product is 100% effective 100% of the time.) Some of the free software recommended by Forum members include: Malwarebytes; SuperAntispyware; and ESET Online Scanner.



   Warning
Make sure you don't install unwanted/unneeded crapware. Some sites are now bundling extra "stuff" with the main product. Uncheck any boxes for things you don't want.
Once you've completed all scans, see if you can rebuild your icon cache.

Icon Cache - Rebuild

If still no joy see if you have any damaged or corrupt system files by running a System File Checker scan from an elevated command prompt (option two.)

SFC /SCANNOW Command - System File Checker

5 more replies
Relevance 49.2%

Not sure exactly what happened but couple days ago the laptop started to hang up or freeze when I tried to run any application, such as a browser, control panel, and even task manager. If I need to turn it off I have to hold the power button which I know is not good but otherwise I would not be able to reboot. If I go into safe mode I can use the computer somewhat sluggish but I can at least open up programs and even get on the internet. I cannot do system restore as this had been turned off. I had a conflicting driver issue that I installed, but that has not helped, I dont know what else to do. Please help this is my only computer.
 

Answer:Solved: Help, laptop only works in safe mode, hangs up in normal mode.

9 more replies
Relevance 49.2%

Hello,
 
all of a sudden Windows 7 became extremely slow in normal mode. This doesn't happen in safe mode.
 
The laptop now also makes 3 beeps on startup, but the beeps disappear when Windows login page comes up. The only thing I did is updating Java and the beeps started.
 
I'm sending in attachment DDS, OTL and ComboFix logs.
 
Thanks in advance for your help!

Answer:Windows 7 runs fine in safe mode, but very slow in normal mode

Hello maestrale,

Welcome to Bleeping Computer.
My name is fireman4it and I will be helping you with your Malware problem.

Please take note of some guidelines for this fix:
Refrain from making any changes to your computer including installing/uninstall programs, deleting files, modifying the registry, and running scanners or tools.
   If you do not understand any step(s) provided, please do not hesitate to ask before continuing.
   Even if things appear to be better, it might not mean we are finished. Please continue to follow my instructions and reply back until I give you the "all clean".
In the upper right hand corner of the topic you will see a button called Follow This Topic.I suggest you click it and select Immediate E-Mail notification and click on Follow This Topic. This way you will be advised when we respond to your topic and facilitate the cleaning of your machine.

   Finally, please reply using the Post  button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply, unless they do not fit into the post.  1.Download AdwCleanerDouble click on AdwCleaner.exe to run the tool.
***Note: Windows Vista and Windows 7 users:
Right click in the adwCleaner.exe and select "Run as administrator"Click the Scan button.

Once the scan complete click Clean to finish cleaning any thing it has found.A logfile will automatically open after the scan h... Read more

28 more replies
Relevance 49.2%

My Toshiba satellite will only boot in safe mode tried sfc/scannow getting this message

Windows resource protection found corrupt files but was unable to fix some of them.

I've tried a system restore but that wasnt very successful either, if I uploaded the CBS log of the scan could someone try help me with the problem. Thanks

Answer:BSOD when trying to boot in normal mode, safe mode works fine

You may need to run SFC up to 3 times for it to have a chance to repair all files.

If it won't then you can consider a Repair Install.

However be aware that factory preinstalled Win7 is one of the worst possible installs of Win7 one can have, larded with bloatware and duplicate utilties that intefere with better versions built into Win7. So I would strongly consider doing the vastly superior Clean Reinstall - Factory OEM Windows 7.

If you decide to try to repair you can also capture the BSOD file and post it up for one of our BSOD analysts as shown here: Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums

3 more replies
Relevance 49.2%

Hi,
I have a Sony VGN-FW139E with window vista. When my computer tried to boot into Windows, it just hangs on window vista loading screen.
If I selected Safe mode or Safe mode with Networking, I got this message.

Loaded: \windows\system32\drivers\crdisk.sys
Please wait?
Then it did not get any further. Is there any solution to fix this problem? Thx..

Answer:Problem can't boot into eithre normal Windows mode or safe mode

See if selecting Last Known Good Configuration helps.

If that doesn't work then try this Repair Install For Vista - Vista Forums

4 more replies