Computer Support Forum

Auto Check Program not found - Skipping auto check

Question: Auto Check Program not found - Skipping auto check

I get this blue screen error "Auto Check Program not found - Skipping auto check" each time that I boot up. What's the cause and how can a fix it?

More replies
Relevance 100%
Preferred Solution: Auto Check Program not found - Skipping auto check

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 127.02%

Hi -Have you changed or added anything recently, or had any type of infection on the computer ? ?Go > Start Accessories > Command Prompt and Right click on it > Select Run as Administrator > Then type scf /scannow and press Enter -This "should" only take about 20 to 30 mins and will check your System Files -Next do the same, but type chkdsk /r and follow any prompts and reboot your computer - The 5 stage check may take from 1 to 2 hours depending on your system, but please let it finish -Thank You -

Answer:auto check program not found-skipping auto check

If sfc /scannow doesnt help then try thisDownloadAutorunsExtract and launch autoruns.exeAllow the scan to run,click on FILE-SAVE Filename:Autoruns.txtsave as type:textUpload the file to wwww.filedropper.com and post the link here

3 more replies
Relevance 116%

What is thissremcom.exe program not found skipping auto check.this appears just when windows loads but before the desktop shows[attachment deleted by admin]

Answer:sremcom.exe program not found skipping auto check.

Download ComboFix? by sUBs from one of the below links. Be sure top save it to the Desktop.Link #1Link #2**Note:  It is important that it is saved directly to your DesktopClose any open Web browsers. (Firefox, Internet Explorer, etc) before starting ComboFix.Temporarily disable your antivirus, and any antispyware real time protection before performing a scan. Click this link to see a list of security programs that should be disabled and how to disable them. Double click combofix.exe & follow the prompts.When finished ComboFix will produce a log for you.Post the ComboFix log in your next reply.Important: Do not mouseclick ComboFix's window while it is running. That may cause it to stall.Remember to re-enable your antivirus and antispyware protection when ComboFix is complete.If you have problems with ComboFix usage, see How to use ComboFix----------Download from DDS by sUBs and save it to your Desktop.Vista users. Right click on dds and select Run as administrator (you will receive a UAC prompt, please allow it)* Double click on dds to run it.* When done, DDS.txt will open.* You will receive another prompt after a while. Click Yes at the prompt and for the next scan to complete.* When done, Attach.txt will open.* Please copy and paste the contents of DDS.txt and Attach.txt in your next reply.

7 more replies
Relevance 103.53%

"autochck.exe not found- SKIPPING AUTO CHECK", my computer keeps saying this when it starts up. It boots up properly but before it gets to the login in screen it shows the message then starts all over again. It is a windows xp, and i do not know what caused it to do that. I have no idea what i need to do to fix it and i don't want to earse eveything on my computer since i have important files on it that are not replaceable. The only thing that i can access is the BIOS, since I'm unable to get into the log in screen or anything else. I need someone's help for this because i have no way to get to anything on my computer. I'm very desperate to get it fixed if anyone could help me. For now im forced to use the library to try and get things done which is a hassle and unconvienent since im a senior in high school. Can some one please help me?

Answer:Autochck.exe Not Found- Skipping Auto Check

Hi and welcome to BCTake a look here: http://www.techspot.com/vb/topic7746-3.htmlIt may help you. Regards,Extremeboy

2 more replies
Relevance 79.17%

using windows vist home priem comes on after microsoft bar starts at start up black screen saying error message smrdg-auto check not found can u tell me if i can delete packard bell digital imager at start up plz
 

More replies
Relevance 78.59%

I've been trying to start up my computer, but whenever I start booting it up a message appears saying "Autocheck program not found- Skipping auto check" but that flashes to a blue screen that says "Fatal System Error" Then around 2 1/2 lines of coding, and then "System has been shut down"

Does anyone know what seems to be the problem?

Answer:Problem starting up-Auto Check program

Hello and Welcome to TSF

Can you boot into Safe Mode?

Try this:
Place your windows cd in the cd rom and boot to it. You may need to change the boot sequence in the BIOS.

1. Boot off of a Windows XP CD. Press R to get to the recovery console.

2. Press 1 to log onto Windows then press Enter. You will need the administrative password to get into to command prompt. If the administrator password was blank press enter.

3. Type: chkdsk /r

4. When the disk check is done type: Exit

5. Take the Windows XP CD out. Boot the system.

1 more replies
Relevance 105.37%

Sup ppl?

I've been trying to get chech disk to run on startup for about a month now with now succes. I've searched the net constantly and tried tons of different approaches, but they all failed for me.

Anyway, I keep getting a baloon popup saying I should run chech disk because I have errors. I was hoping there's any type of software I can buy/download that will do the same thing as Check Disk, as in fix errors and bad sectors on disk.

Thanks in advance ppl.


-Des

Answer:Check Disk \ Auto Check Alternatives

There isn't any such software??

-Des

3 more replies
Relevance 105.37%

Sup ppl?

I've been trying to get chech disk to run on startup for about a month now with now succes. I've searched the net constantly and tried tons of different approaches, but they all failed for me.

Anyway, I keep getting a baloon popup saying I should run chech disk because I have errors. I was hoping there's any type of software I can buy/download that will do the same thing as Check Disk, as in fix errors and bad sectors on disk.

Thanks in advance ppl.


-Des
 

Answer:Check Disk \ Auto Check Alternatives

Well...? I'm sure there must be some available.

-Des
 

7 more replies
Relevance 100.45%

when rebooting my computer blue screen message appears showing auto check.exe. program not found ( windows system 32 ) should I try to fix this problem or not ?? if I should fix it what steps to take, appreciate yr helpthanks

Answer:windows reboot blue screen problem " windows auto check system 32 not found

http://support.microsoft.com/kb/913502( All the following information from the above site. )QuoteTo resolve this problem, follow these steps: Insert the Windows XP startup disk, and then close the Welcome to Microsoft Windows XP window if it appears. Click Start, click Run, type cmd, and then click OK.At the command prompt, type the following command, and then press ENTER. copy drive letter:\i386\autochk.exe %WINDIR%\system32Note The drive letter placeholder represents the drive, such as "D:", that is running the Windows XP startup disk.Type Y when you receive the following message: Overwrite C:\WINDOWS\system32\autochk.exe? (Yes/No/All): Remove the Windows XP startup disk, and then restart the computer.Back to the top

4 more replies
Relevance 93.89%

When my computer starts it says something like autontfs program not found skipping auto check. How do I turn this off?

Answer:How to turn off auto check.

Do you, or did you recently, have Diskeeper installed on your system?

4 more replies
Relevance 93.89%
Question: auto disk check

whenever i turn on my desktop(win xp), it always checks disks for inconsistency(as if pc has not been shut down properly), inspite of the fact that i always shut down it properly. what is the solution for it??

Answer:auto disk check

Let the scan run twice. If it comes up clean, the message shouldn't appear again or conversely your HD might be going.

4 more replies
Relevance 93.89%

when starting, the following message - autocheck program cannot be found, then attempts to reboot and on and on and on...

Answer:xp home ed. auto check???

Quote:





Originally Posted by toyotamike


when starting, the following message - autocheck program cannot be found, then attempts to reboot and on and on and on...

1 more replies
Relevance 93.89%
Question: auto disk check

When I start my computer and after the boot screen a blue screen appears [can?t fiend file disc check cancelled] and then starts windows any answers?

Answer:auto disk check

looks like windows is trying to do a disc check.go to my computer right mouse click on your drive,properties,tools and tick for the computer to do a volume check and see if it works.

7 more replies
Relevance 93.89%
Relevance 93.89%

In the Microsoft Works Word Processor, (Vista) when using the spell check, I accidently clicked "ADD" on a mispelled word, and now it is in my dictionary.
Can you tell me how to remove it?
 

More replies
Relevance 93.89%

I have my own FTP site. People FTP files to my site, but I have to go into the site to look and see if anything is there to collect.

Does anybody know of a commercial software package that will automatically/regularly check to see if anything is there?
 

Answer:Auto-check FTP site

what operating system is your web server running? if it's NT or 2000, you could create an administrative alert everytime the contents of the ftp-root directory changes.

other than that, i'm not sure.
 

1 more replies
Relevance 93.89%

I want to setup Outlook to automatically dial online every hour to check for new email messages. I have found how to setup Outlook, but I cannot get Dial-up Networking to automatically dial without prompting me for my password. I know there is a way to store the password and have it auto connect. How can I do this?
 

Answer:Auto check for messages

If you are bypassing the windows password when you login (in other words, just hitting "cancel" instead of using a password) your password list will not load with Windows. Therefore, your dial up networking password will not be available, and you will need to enter it manually.

To stop this, either use a Windows password, OR, better & easier yet, leave the box blank and hit OK instead of cancel. This will result in you not having to have a windows password, and allow your password list to load up. Once you have done that, you should be able to save your password in dial up networking and automatically connect however you have it set up in Outlook.

Hope this helps!
 

2 more replies
Relevance 93.07%

Whenever Outlook Express 6 is open, messages in the Taskbar indicate it's checking for mail quite frequently (unless I'm working offline, in which case it keeps telling me it couldn't).I like to choose when to check for mail, (& do it through Mailwasher). Can I stop the automatic checking?In OE6 Tools-Options-General, 'Check for new messages every .. minutes' is unticked (& always was).It's only happened since upgrading from an older Internet Explorer/Outlook Express.(Using Win98SE).

Answer:How to stop auto mail check in OE6?

Try ticking the link, close OE, open it and then untick the link.

2 more replies
Relevance 93.07%

By mistake, the automatic check in start was deleted.any chance to reactivate, download it somewhere, somehow?thanks

Answer:Reload AUTO CHECK- N500?

Could you try to explain what you mean by "auto-check"? Do you mean Check Disk (chkdsk)?
 
If it helps you, post in French and copy / paste a translation from translate.google
 
google.translate;  
 
Pourriez-vous essayer de vous expliquer ce que vous entendez par "auto-contrôle"? Voulez-vous dire Check Disk (chkdsk)?

Si cela vous aide, après en français et en copier / coller d'une traduction de translate.google
 
Disclaimer; googles French - not mine

1 more replies
Relevance 91.84%

My question is we have a table of trucking companies. In that table there is also a check box to mark whether they are 3rd party or not. We are using this table as a validation for another table so only the trucking companies we put in can be used in a drop down list (auto complete or whatever). So they also want the 3rd party checkbox in the other table to auto check based on the trucking company name. Is this possible?

I am pretty good with access but this is something i've never done and trying to come up with a phrase to ask google to help me is not giving me the results i am looking for.

Here is the quick and dirty.

User A goes into enter a new work order. He chooses a trucking company from the drop down list which validates off the trucking table. Also in the trucking table there is a checkbox marking that it is a 3rd party company. There is a checkbox on his table that we need to auto check since he picked a 3rd party trucking company.

Can anyone enlighten me as to how this can be done?
 

Answer:Access: Auto check a box based on company name

9 more replies
Relevance 91.84%

Can anyone point me to documentation that explains in detail how spell check/auto-correct works in Windows 10? For example, (1) How does it handle multiple installed languages? and (2) What applications does it work in? (On my installation, it works in the compose mail window of OE Classic but not in Notepad or Wordpad.)
Thanks

Answer:Documentation for spell check/auto-correct?

Spell check and the language settings for that are almost always per application unfortunately.

More:
Notepad Spell Check Add On By Spell Check Anywhere
(not free)
Does WordPad or Notepad Have Spellcheck? | Chron.com
interestingly suggests this should apply for notepad, wordpad. That doesn't happen for me despite:
Ideas here:
http://answers.microsoft.com/en-us/w...64d99b5?auth=1

My preliminary thought: this seems to be sthg that was meant to be available, but doesn't, unless I've broken it!

1 more replies
Relevance 91.84%

Is there a way I can setup Auto Spell Check for all users? Like force it from the server?

Thanks.

Answer:How to setup Auto Spell check in Outlook

use word as email editor. in oulook, tools | options, mail format.


there's also an option in the other tab that forces a spell check before sending.

2 more replies
Relevance 91.02%

At work my station runs on w98... and we use outlook 2000 for emails.... i can't get the auto name check to work!!!! The 1 where when you type part of persons name, and then tab onto message window (this is when auto complete should work) nothing happens.
i have ticked the check box for this in options....
any ideas??????
 

Answer:Solved: Auto check names in outlook 2000

Hiya

I've moved you to Web and Email for more response

Does this help:

http://support.microsoft.com/?kbid=296407

Regards

eddie
 

3 more replies
Relevance 91.02%

Hello, all, and thank you in advance for the assistance. I am currently working on a customer's Toshiba Satellite C55 running Windows 8. Upon initial review, it was obvious that the machine was badly infected with numerous junkware and adware. Per our standard operating procedures, I backed up relevant data and restarted the machine in safe mode. Junk programs were uninstalled via CCleaner, scanned using MBytes, made copies of registry and repaired using CCleaner, cleaned up HDD using CCleaner, and restarted to Windows 8 (regular). Up to this point, all programs are installed from a flash drive. Typically, upon restart from safe, we run ESET Online Scanner. However, I noticed immediately that Chrome was giving me the "Could not connect to proxy server" error. I checked setting in Chrome to find that the "Proxy" tab was grayed out. I opened Internet Options from control panel -> Advanced -> LAN settings to find, as I had assumed it would be, the Proxy button selected. I deselected the Proxy settings, re-selected Automatically Detect Settings, and clicked OK. Same error from Chrome. Checked LAN settings again to find Proxy checked. Following this, I ran ComboFix, to no avail. Basically, every time I deselect Proxy settings (and even when I delete all Advanced Proxy Settings fields), something is automatically selecting it again. I have a few days to complete this, so no big rush. I really appreciate the help.

Answer:Proxy Server Auto-Check (Infected Machine)

Hey, Please post the Combofix log. Please download FRST (by Farbar) from the link below and save it to your Desktop.Download Mirror #1If you are unsure whether you have 32-Bit or 64-Bit Windows, see hereDisable all anti-virus and anti-malware software to prevent them inhibiting FRST in any way. If you are unsure how to do this, see THIS.Double-click FRST.exe/FRST64.exe (depending on which version you downloaded) to run it. (if you have Windows Vista / Windows 7 / Windows 8: Please do a Right click on the FRST icon and select Run as Administrator)When the disclaimer appears, click Yes.Click Scan to start FRST.When FRST finishes scanning, two logs, FRST.txt and Addition.txt will open.Copy (Ctrl+C) and Paste (Ctrl+V) the contents of both of these logs into your next post please.

4 more replies
Relevance 91.02%

For the last few weeks, every time I start up my laptop I receive the message that "The auto check feature of Toshiba Service Station has expired".

I've tried re-installing/repairing the program but it hasn't made any difference. It still seems to work but I find this annoying and I'd like to resolve the issue.

Thanks for any advice.

More replies
Relevance 89.79%

Hello AllPlease let me know how can i check the free space in d drive without human intervention and also can i set a threshold for free space for example if the space in d drive is less than 2 gb a alert will be prompted on the screen on windows xp.

Answer:auto check disk free space Without human intervention

Without human intervention? That's beyond my scope.How do you know when a politician is lying? His mouth is moving.

2 more replies
Relevance 89.79%

Hey, Thanks for taking the time to take a look at this.

My computer froze during a shutdown and when I turned it back on it ran a checkdisk and removed some files. Now when I try to run a few games, or try to run some programs like teamviewer or even dxdiag.exe I get this error:

[application name] - System Error

The program can't start because dxgi.dll is missing from your computer. Try reinstalling the program to fix this problem.


I tried going to microsoft for help but they wanted me to pay them over $100 to fix the problem and I don't have much extra cash. Hoping someone on here would help!

Also I am unable to install drivers at the moment. They just freeze once I click start. I tried to redownload directX but the microsoft website keeps sending me to a page to install windows 10 instead.

I also tried sfc /scannow which did not fix the problem and this:
C:\Windows\system32>dism /online /cleanup-image /scanhealth

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.18489

................................................................................
................................................................................
................................................................................
................................................................................
..Completed running scanhealth, check logs at %windir%\logs\CBS\Checksur.log

The operation completed succ... Read more

More replies
Relevance 89.38%

Dim string
String1 ="2708"
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "cmd.exe /c echo "& String1 &"|clip",0, TRUE
x=msgbox(string1)
Dim string2
String2 ="8451"
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "cmd.exe /c echo "& String2 &"|clip",0, TRUE
x=msgbox(string2)


Dim string3
String3 ="0884"
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "cmd.exe /c echo "& String3 &"|clip",0, TRUE
x=msgbox(string3)


Dim string4
String4 ="B362"
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "cmd.exe /c echo "& String4 &"|clip",0, TRUE
x=msgbox(string4)
Dim string5
String5 ="8007"
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "cmd.exe /c echo "& String5 &"|clip",0, TRUE
x=msgbox(string5)

Message Box Keeps Moving and Showing Next Part Of Serial Number Which Auto Loads into Buffer
All You have to do is paste and press Message Box To get next set of 5 numbers....

Like For System Navigator V5 I use this Serial Number

More replies
Relevance 84.87%

I have Word 2002, SP3, for Windows Office XP Pro.

My problem is I want to permanently turn OFF the autocorrect options (all of them: correct initial capitals, correct first letters of days, etc etc, autoformat, as well as auto text and auto type).

Yes, I have unchecked all the boxes in Tools > Autocorrect Options, the problem is I have to painstakingly go though all the boxes every time I open Word and uncheck them. My setups are not remembered.

I can't figure out how to make these options stay set this way.

I've tried installing the Office Resource Kit and setting a system policy (though I am the only user on this PC), but no success.

I had to rebuild my system a month ago -- before that, I never had any problems, Word seemed to remember exactly my preferred set up and saved autocorrect options etc to the normal template.

I checked the normal template and it is in Doc Settings folder where it should be.

I searched the forums and Word help but can't seem to find any advice, mainly because most people usually run these options and they only wish to modify the instances where they apply, rather than permanently disable them.

Please help! Much appreciated! Thanks!
Andrew
Sydney Australia
 

Answer:Solved: I want to kill off autocorrect, auto format, auto text, auto type

8 more replies
Relevance 83.23%

I am looking for a free, easy to configure utility that will auto start the index.html for my website on a CD.

I tried http://www.whirlywiryweb.com/q/shellexe.asp, but it didn't work.

my autorun.inf file looks like this:

[autorun] open=shellexe.exe index.html

and is named autorun.inf

I have that file, the index file and the shellexe.exe file all in the root CD, and I made sure to close the session and to close the CD, but nothing happens when I insert the CD.

Can anyone tell me what I am doing wrong, or, a program that gives better directions?

Thanks

Marlo
 

Answer:Auto Start/Auto Run program?

Just taking a stab but is your auto-run function turned off on the PC your testing on?
 

3 more replies
Relevance 82%

While typing message, previously it use to automatically correct spelling but after update there is no option

Answer:My Windows phone updated to Windows 8.1 and now auto spell check is not working, how do I get it back?

I wonder if it somehow got disabled?
Go to Settings -> Keyboard -> tap on the language you use and make sure "Correct misspelled words" is checked.

2 more replies
Relevance 81.59%

Hello!

So I recently installed Windows 7 Home Premium on an Acer Aspire 5349. I've been having a bunch of issues with it since the install.

Firstly, When I boot, it takes me to the "Disk Check" screen and tells me that one of my disks needs to be checked for consistency. However, the disk in question isn't something like "C:" or "D:" it's "\\?\volume{c4afec15-cb60-11e4-9583-806e6f6e6963}". The disk check also automatically cancels. It doesn't prompt me with the usual " Press any button to stop the disk check" option, just straight to " Disk check has been cancelled"

When I eventually get to the desktop, I get the screen " Windows detected a hard disk problem ". I look at the details and I'm told that my C:\ drive has been reporting failures. When I check the status of the disk via the Disk Management tool I'm told that all my partitions are healthy.

When I actually use the laptop, it's very slow and frequently freezes. It takes a while to catch back up and sometimes these freezes lead to a BSOD. The BSOD message was KERNEL_DATA_INPAGE_ERROR. I checked the event viewer and it also seemed that before certain crashes I would have driver controller error on an IDE Port. I've attached a picture of the disk check screen, event viewer, and memory dump. I apologize about the quality of the pictures, I couldn't screenshot the images on the actual laptop as it was freezing and crashing too often.

I ... Read more

Answer:Frequent Freezes, BSOD, Disk Check auto cancels, and Hard Disk Errors

Code:
DISK_HARDWARE_ERROR: There was error with disk hardware
Ensure all data is backed up, then run the DOS version of the LONG test of SeaTools, and report the result:
SeaTools for DOS and Windows - How to Use

3 more replies
Relevance 79.54%

My computer has been like this for the past months, every minute, every hour, every seconds. it reboots, shutdown, and hibernate automatically, and sometimes wait for around 5-10mins before it my pc turn on. I full scanned my computer but found nothing. Can someone help me? This is my Hijack log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:17:59 PM, on 11/6/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\ATI Technologies\ATI.ACE\CLI.EXE
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\WINDOWS\VM303_STI.EXE
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\Common Files\Ulead Systems\AutoDetector\monitor.exe
C:\Program Files\SpeedBit Video Accelerator\VideoAccelerator.exe
C:\Program Files\Common Files\InterVideo\SchSvr\SchSvr.exe
C:\Program Files\Nero\Nero 7\InCD\NBHGui.exe
C:\Program Files\Nero\Nero 7\InCD\InCD.exe
C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
... Read more

Answer:auto reboot, auto shutdown, auto hibernate ~_~

I see you have My Web Search installed. Do you use this?

Most of the time, this is actually malware.


Code:
C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe


Code:
every minute, every hour, every seconds.
That's a very broad piece of information. So you are saying sometimes
you get hours out of your PC before it shutsdown/hibernates?

3 more replies
Relevance 79.54%

My computer has been like this for the past months, every minute, every hour, every seconds. it reboots, shutdown, and hibernate automatically, and sometimes wait for around 5-10mins before it my pc turn on. I full scanned my computer but found nothing. Can someone help me?

Answer:auto reboot, auto shutdown, auto hibernate

You need to check Control Panel, Power Options. (screenshot)

Note the tabs. In this dialog you set your options and they are set for the Power Scheme shown. In Laptops, there are usually 2 schemes listed, one for AC powered and a separate for Battery powered.

Desktop OR AC powered Laptop, the only thing you MAY want to turn off is your Monitor.

1 more replies
Relevance 77.9%

I need help as I'm getting very frustrated.
My D: drive (non system) keeps getting check on startup, I tried to use the 'chkntfs /x D:' to skip this but it doesn't work.

After a few forced resets, when I land the 'press any key to skip disk check in 8secs...' And when I do press a button, the countdown speeds up and goes straight to scanning and repairing. Wtf?

So frustrating! Now it's stuck at 4%. Any help would be greatly appreciated!

Answer:Win10 Skipping disk check

What else do you have on the PC? Your System Specs tell us nothing useful.

2 more replies
Relevance 74.62%

In the last two days, I've noticed I'm getting this message - very briefly - right before Windows loads:Code: [Select]?A Program Not Found - Skipping AutocheckI've done a System Restore (my corp IT only keeps one restore point), and that has not fixed it.All my Googling shows areas where either a) They can't boot at all, or b) it comes after a HD/partition; neither of which is my case.Everything boots fine, just a weird message.Thanks

Answer:'?A Program Not Found - Skipping Autocheck'

Which Windows version?   Did you do anything that could have caused the loss of files such as delete old data etc or did this show up on its own unexpectedly?

8 more replies
Relevance 74.62%

im a complete novice and require advice on fixing a small problem.
when i boot my pc , xp home os, im getting , briefly,the following messages on a blue screen, after which, the pc then runs normally.
x]o program not found skipping autocheck
c]o program not found skipping autocheck

ive googled the messages and have been informed that the problem is a result of a corruption in the BootExecute , in the registry. i have to delete the multi-string, which , at present, consists of the word autocheck twice and a number of symbols and replace it with the default :-
autocheck autochk *.

i double click BootExecute, which opens a Edit Multi-String box containing ."value name" ie. BootExecute, and "value data" as below
autocheck x}0?U!?&
autocheck ?}0pD!D????M
autocheck lsdelete

my question is, do i simply delete the present "value data" and type the default autocheck autochk * into the box and click ok.
am i correct that there is a space between the two words and another before the asterisk.
this is the first time ive been into the registry and all the warnings ive heard and read have made me wary of mistakes, so i ask for understanding as a novice.

Answer:program not found skipping autocheck

What's the link for the site providing you with this guidance?

Louis

5 more replies
Relevance 73.8%

Recently I delete my ubuntu and try to boot my windows 7, and this error show up. I've try the startup repair by using the windows 7 CD, and I am sure autochk.exe is in my system32 folder. Any ideas of this?

Hmm....I've try to fix the MBR, perform a chkdsk check in cmd but still get this error show up.

Answer:autochk program not found - skipping AUTOCHECK

Run the Startup Repair up to 3 times. That's what has been posted here and seems to work. Not sure why but I won't argue with success.

Maybe gregrocker or Brink or one of the other folks is around and can add some info on why this works.

2 more replies
Relevance 73.8%

Please excuse in advance the long verbage....

Background: this is a WIn XP SP2 system, I built it, with a DP35DPM mother board, 2 physical SATA drives, and a DVD drive. hdd0 is partitioned as C: --(60GB) and D: --(240GB). hdd1 is E: --(320GB). D: and E: only contain data. C: has win xp and programs.

About 6 months ago, on rebooting my computer, it failed to get an IP address. My laptop and son's computer were able, however, to connect via the same ethernet jack. A friend suggested I run CleanUp! I did, rebooted and wala! Problem solved.... until the next reboot. This time CleanUp! made no difference. Same friend suggest Malware. Ran it, found a few things, quaranteened and deleted, reboot. Wala. Internet connection..... until next reboot. Of course, Malware made no difference this time. Friend ran out of ideas. I installed "RegistryDefense", ran it, made the suggested fixes (about 60 of them!), reboot, wala.

By now, I am getting the idea and trying to run my PC 24/7 to avoid reboots. This is about 1 months after the 1st occurrence of the problem. At this point, all my clicks on google searches are redirected to spam sites. This problem seemed to evolve as well. I live on a school campus and thye like to lose power every now and then to fix various things. So, I am forced to reboot. I need to run Registry Defense multiple times now to finally get a reboot that obtains an IP address and connects to the internet.

Over time, I read that this issue might be caus... Read more

Answer:autochk program not found - skipping AUTOCHECK

I have read this three times.
It must be Sunday night syndrome but the thread title suggests that on boot this is the message
autochk program not found - skipping AUTOCHECKClick to expand...

That indicates that a chkdsk has been scheduled, and cannot run as the necessary entries to run it are missing.

There is little doubt that this is the result of the "RegistryDefense" program.
Have a look at this
http://www.mywot.com/en/scorecard/registrydefense.com
I do not think I need to say anymore about that ACTUAL program.
In relation to registry cleaners in general see the link on my signature and be advised - please keep away from them.

Any opinions out there from the gurus? SHould I try to go back to the old install with all my nice programs? Or should I just stick with my new installation and work to keep it clean?
Click to expand...

If this is now your ONLY real question. If you go back to the old - why do you not think you will have all the problems you did have, even apart from those created by the registry cleaner.

My advice is to edit your boot.ini, so that you boot from ONLY the new installation.
Uninstall that unwanted and clearly dangerous so called registry defense.
CREATE a restore point.
DELETE all previous restore points.

When you have what you need uninstall/delete all from the old installation.

xlite???Click to expand...

nlLite - I would suspect
http://www.nliteos.com/
 

2 more replies
Relevance 73.8%

I ran chkdsk/r attempting to fix a separate issue. And then I noticed afterwards that during the boot process, I would get this message:autochk* program not found - skipping AUTOCHECKThe message shows up after the windows logo and before the logon screen.I can still run windows just fine with no problems what-so-ever. The only issue with it, is that it's there. I just want to make the message go away. I can make it not show up by selecting "no GUI boot" in msconfig, but that only masks the issue. If I can fix it, I would like to do that.So, I searched for this issue on the forum here and found THIS. I followed the instructions there, but they didn't work.Is there anything else I can do?Thank you for the help!K.CampbellSystem Info:OS: Windows 7 Professional x64Laptop: Toshiba Satellite L670 CustomizedMfg part#: PSK3AU-055014RAM: 8GB Dual-Channel DDR3CPU: Intel i5 CPU [email protected]: Toshiba NALAA (CPU)Storage: 488GB Toshiba MK5065GSXVideo Card: Intel HD Graphics (Integrated)Sound Card: Intel Display AudioAntivirus: MSEFirewall: Windows Firewall

Answer:autochk* program not found - skipping AUTOCHECK

FWIW: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-7-fails-to-boot-autochk-program-not-found/46a244b4-970b-4753-9bbd-002916471f87

Louis

11 more replies
Relevance 73.8%

When I restart my computer and before I actually log in, I get a blue Windows XP screen which states: "msln program not found - skipping autocheck". I can only assume this isn't good. I have downloaded Malwarebytes and have run a quick scan and a full scan and have fixed most of the registry problems but when I restart my laptop, I still get the same message. My guess is the problem is still in one of the registry files which haven't been fixed. What should I do to correct the problem?
 

More replies
Relevance 73.8%

when i start my windows 8,1 a black screen appears for 3 seconds with this message (roboot program not found skipping autocheck).
its annoying and im trying to delete it.
i tried malwarebytes free,hitman pro,kaspersky virus removal tool,eset online scanner,emsisoft kit and adware cleaner.
i dont know what else to do.....

Answer:roboot program not found skipping autocheck

See this link. Are you running anything like a Diskeeper defrag program? Always be careful editing the registry. The problem is I can't say what will happen when the registry key is edited in Windows 8. What is the contents of the registry key shown in the link. You can export the key
 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
 
and then copy and paste the contents in your next post.

9 more replies
Relevance 73.8%

I have winXP (SP3). I had no problems with anything, but I decided to follow this guide just to be on the safe side. It's advised in the guide to make a more thorough virus/spyware scan by doing it in safe mode so I pressed F8 during boot up, but it proceeded to boot normally instead of giving me the option for safe mode and right before the login screen, a blue error screen showed up with the message: "sprecovr program not found. skipping autocheck". After I logged in everything seemed normal (maybe a little bit slower, but I could be just projecting) and I restarted to see if the error would show up again and it did. It shows up every time now right before the login screen.

I tried searching for this type of problem involving sprecovr file, but I couldn't find anything substantial, so I'd really appreciate some help.

Thanks in advance.

Answer:sprecovr program not found. skipping autocheck

I would add to that guide to download www.malwarebytes.org and run a full scan in Safe Mode with Networking. If F8 won't work try F5. You must start hitting it right after the POST beep but before the Windows XP Splash Screen.

4 more replies
Relevance 73.8%

OS loads, then this is shows on a light blue screen "autochk program not found - skipping autocheck". After a few seconds a BSOD comes and the PC restarts. This is the main prblem that started all the other ones. So, if I want to fix a problem, go to it's start.
How can I fix this?
 

More replies
Relevance 73.8%

This message pops up on a blue screen. It then lets me login like everything is normal. Every since that message has been showing up, my computer has been running incredibly slow, it is unbearable. I would say I am average when it comes to computer problems. I have no idea what this is or what I need to do...

Answer:MSLN program not found skipping autocheck

msln program not found skipping autocheckhttp://www.google.com.au/#hl=en&biw...You are infected, lets see if going back to an earlier date works, if it does, we will need to run special infection cleaners.I have had good results using this way or Safe Mode, different to Last Known Good Configuration in Safe Mode.http://www.microsoft.com/windowsxp/...http://bertk.mvps.org/index.htmlSystem Restore is accessed the following way:1. It's a good practice to shut down all other applications before using System Restore, as it requires a full-system reboot to complete the installation. Connecting to the internet is not required, however. So shut all applications. Then click "Start."2. Start > All Programs > Accessories > System Tools > System Restore. Then the program will load. Or,If System Restore doesn't work in Normal Mode, it might work in Safe Mode.Toggle F8 or Press Ctrl ( depends on your comp ) during bootup ( just before, verifying DMI pool, message comes on )Select Safe Mode.http://service1.symantec.com/SUPPOR...http://support.microsoft.com/defaul...http://www.whtvcable.com/virusremov...http://www.microsoft.com/windowsxp/...

2 more replies
Relevance 73.8%

hi all as anyone come across this prob b4 my pc just reboots constantly eith this error,the partition is active and unhiden and fully intact as i can access all files from my other partition, as anyone got any suggestions, basically its another partition magic special!!!!

More replies
Relevance 73.8%

Hope this is in the right forum.

I have recovered from a virus thanks to the help of this site ie: "Cookiegal" but noticed that when I start my computer I see a message saying "msln program not found. skipping autocheck.. Can anyone help me fix this? Thank you
 

Answer:msln program not found... Skipping autocheck

6 more replies
Relevance 73.8%

 Hi everyone,  After rejuvenating my T61p (Vista Home Premium) this message pops-up during booting: "Isdelete program not found  -  skipping Autocheck" The message appears for a few seconds and then disappears. Booting continues and I do not notice any other symptom on my system. Has anyone experienced this same issue or knows what the message is all about? What program is that "Isdelete" and what are the consequences of this "skipping Autocheck" warning? How serious is this? Please help.        













Solved!

Go to Solution.

Answer:Isdelete program not found - Skipping Autocheck

OK, if anyone ever encounters this issue, I found a solution here: http://forums.techguy.org/windows-vista-7/583755-solved-solved-lsdelete-program-not.html It "missing" file seems related somehow to Ad-Aware, which I un-installed recently. The first two letters of the program name (LS) seem to stand for "LavaSoft", which is the publisher of Ad-Aware. The above linked solution seems to have worked for several other people and it certainly worked for me too  --  I got rid of that infamous message...  

1 more replies
Relevance 73.8%

Gentlemen/women,

OS::: XP w/ SP2

I am having a problem.

I installed a trial version of Diskeeper (DK) two months ago… used the program with good results, let it expire, & eventually uninstalled it.

Yesterday, downloaded DK again (two months later & after trying other defrag programs (which also worked great))… the second download of Diskeeper wouldn’t work after installed, indicated by a prompt to purchase the software.

I uninstalled DK and went about my normal computing routine & shut down with no drama.

This morning, I start up my p/c and get a quick prompt noting: "OODBS program not found -skipping auto check".

P/C boots up & functions fine otherwise.

I tried running chkdsk manually… no effect. Tried restoring p/c to an earlier time, no luck. Tried error checking my drive, nothing comes up. Tried to repair & reinstall XP, no luck.

The OODBS message is still there

Can anyone help me?
 

Answer:OODBS program not found -skipping autocheck

10 more replies
Relevance 73.8%

Can anyone please help. I get the message autoc program not found before the windows welcome screen appears. Then after I have used windows explorer my screen goes blank then recovers with my calendar missing and showing the following message:The exception integer division by zero (0xc0000094)occurred in the application (0x03kdd928.Any ideas how I can resolve this, or should I just go and by a mac!

Answer:Autoc program not found - skipping autocheck

Check Disk Prevent Upon Boot (Line 294)click hereDisable Autochkclick here

2 more replies
Relevance 73.8%

Hi, I seemed to have run into a problem. I'm running xp pro w/ sp2. I usually keep my computer on all the time but yesterday I turned it off. When I turned it back on this morning, I got a message "Windows could not start because the following file is missing or corrupt: \windows\system32\config\system". I followed some advise online which told me to use the recovery option using my win xp cd. When I rebooted it seemed to work ok but then came another message, "Autochk program not found- skipping Autocheck" then it reboots. It keeps doing this over and over again. I found some more advise online which told me to copy the program from my win xp cd to the harddrive using the recovery option. I did this. I also placed a copy into the C: and C:\windows. When I rebooted it came up again. I don't want to lose my file by reformatting since I haven't backed them up yet. Any help would be greatly appreciated.
 

Answer:Autochk program not found-skipping autocheck

9 more replies
Relevance 73.8%

Running Win XP Pro..

Okay, I'm removing Norton from my coputer, I go their site and download 3 programs to do this.
After running the second it tells me to reboot.
It starts up, finds the drives etc, then goed to the NORTON GO BACK screen, more dos stuff, then flashes "Autochk program not found, skipping auto check"

Then it goes back, sees the drives etc, the GOBACK screen, it's stuck in a loop.

I tried using GOBACK, wouldn't do anything, tried going to "last known good", no luck there either, next I'll ry safe mode but unsure what to do from there.

MAybe I should boot from my CD, ty to do a reapir or what?
How can running a Norton program to get rid of Norton cause so many problems?
What to do?
 

Answer:Solved: Autochk program not found, skipping...

UPDATE

Tried reinstalling to do a repair, it says it is not able to install on C and asked if I want to reformat, answer to that of course is NO!
Damn....
 

2 more replies
Relevance 73.8%

I have a dell dimension 4600 running Windows XP Pro. I removed Itunes and been able to boot since. I get a blue screen indicating autochk program not found - skipping autocheck. It gets stuck at this point and won't boot. I've gone into recovery panel and can't get anywhere. Although I was able to see the autochk.exe file in DOS under the Windows directory.

Now I'm hoping I can at least get a few files from the DOS prompt and then rebuild the system. When i get to the DOS prompt it won't let me change to my document and settings folder. It says access denied.

Two questions I hope someone can help with--
How can I fix the reboot?
OR
How can I get my files copied to a external drive?

Any help is greatly appreciated.
 

Answer:autoch program not found - skipping autocheck

This might fix your problem
http://www.pchell.com/support/autochknotfound.shtml
 

3 more replies
Relevance 73.8%

When trying to boot my Vista machine I get a black screen with "autochk program not found- skipping AUTOCHECK" on it and then it reboots. Any help to fix this would be greatly appreciated.

Answer:autochk program not found- skipping AUTOCHECK

I believe your MBR is damaged:http://support.microsoft.com/kb/927392

1 more replies
Relevance 73.8%

When re-booting Windows XP Professional I get this message: "autochk program not found - skipping autocheck". Then the PC shuts down and starts the re-boot over again. It is like a loop cycle! Cannot get booted up to the desktop. HELP! Thank you.
 

Answer:autochk program not found-skipping autocheck

I suggest that you report your thread and ask for it to be moved to the XP forum.
 

1 more replies
Relevance 72.98%

I was attempting to install Norton System Works 2006, it failed and gave me some instructions to fix the issue which consisted of downloading 3 tools and running them to clean the failed install, and then try the install again. I tried to reboot first (I don't recall if I was instructed to or not!) and now it goes through the motions of starting up...bios screen, Norton Go Back Screen (new), XP loading screen, then I get a screen that says "autochk program not found - skipping AUTOCHECK" and it restarts. It just loops through this again. It will NOT start in SAFE MODE, it will NOT start in "Last known good config...". I'm really at a loss for what to do or where to start...I've never seen an issue like this before.
 

Answer:Solved: autochk program not found - skipping AUTOCHECK

7 more replies
Relevance 72.16%

When I turn on my computer, before the login screen a blue screen comes up that says:

"OODBS Program not found - skipping autocheck"

Then It goes to the login screen and It works fine. How do I remove this error?

Thanks,

Mike
 

Answer:Solved: OODBS Program not found - Skipping autocheck error

16 more replies
Relevance 72.16%

Hi,

Recently, I have been unable to boot into Windows 7 SP1. Whenever I boot try to boot into Windows, I get the error: autochk program not found - skipping AUTOCHECK.

I have booted into System Repair several times, and ran Startup Repair, tried using bootrec.exe, ran chkdisk, and also attempted to run sfc. However none of those allowed me to boot into Windows. When I first ran sfc /scannow I received an error message saying that I needed to restart. Then I tried running sfc /scannow /offbootdir=c:\ /offwindir=d:\windows, and I received an error that said: "Windows Resource Protection could not start the repair service."

At this point, I am not sure what I should do. Btw, I am posting this from my Linux installation on a different partition on the same hard drive Windows 7 is installed on, which is why I am unable to post the system information from SysInfo.

Please let me know what I can do to resolve this problem.

Thanks,

Daniel
 

Answer:Windows 7 Not Booting: autochk program not found - skipping AUTOCHECK.

16 more replies
Relevance 72.16%

Hello,

I am having a problem with booting from hard drive A. Hard drive A and B both have XP.

I recently installed and uninstalled SP3 on hard drive A and uninstalled\ all the .net frame works. After I restarted HD A I got this.

Then this


I have a registry backup and system restore on HD A but I cannot boot HD A to get to them.

I hvae tried safe mode and last known good configuration

I am currently writing from HD B.

Any Ideas?
 

Answer:Urgent help needed Autochk program not found skipping then BSOD

If you have an XP or Vista disc, try booting from that and choose the repair/system restore option.
 

1 more replies
Relevance 72.16%

Greetings,

I am doing a lot of from-scratch vanilla Windows 7 installs and am wondering if there is a way to get the whole bit about Windows Updates and reboots done automatically? It would be nice that if after installation + NIC drivers loaded + OS activated I could run some program that would work on triggering WU to download and install (except optionals) + reboot + repeat when needed until there are no more Windows Updates available.

It would allow me to spend only 15 minutes with a computer rather than babysit it for several hours constantly checking to see if it wants a reboot + start Windows Updates again after machine has rebooted, etc.
 

Answer:Doing lots of vanilla Win7 installs - a way to auto-reboot and auto-start updates?

Is this for identical systems or for different hardware each time?
You could use a pre-made image (that contains the drivers) with all the updates that would be pushed out to the machine. You could also try something like WUInstall and the reboot cycle option.
 

14 more replies
Relevance 72.16%

When using the virtual keyboard I am almost conditioned to expect it to do what my iphone and ipad does with intuitive stuff like autocorrect spelling upon fat fingering, adding periods at the end of a sentence and capitalizing the first word in a new one. My blackberry adds the apostrophe as well like in i'm.

More replies
Relevance 72.16%

Hi, 
Will appreciate any help regarding this issue. 
My Gmail account is auto sending an email to all my gmail contacts without my knowledge until I saw reply posts of unsuccessful emails. Contents as such:
"Good Day.I just Uploaded a file,I would like you to view.Click Here to view. "
I too opened a similar email afew weeks back. Nothing seems wrong at first so I never really thought much about it.
Can someone help me on this? 
I have just changed my password for my Gmail. hopefully it stops the sending. but I want to know if my computer is infected or by using smartphones or tablets, will it affect the gadgets too? 
Thank you! 
 

Answer:Gmail auto sending to my contacts, and auto deleting a virus link

A SPAMmer does not need access to your Gmail account in order to use your email address.
 
They can use whatever SPAM-sending program they like to send out email using *-your-* email address in the Sender's field.
 
Then, if any of the email addresses they sent the email to happen to be invalid, the unsuccesful delivery messages would be returned to you simply because your email address was in the Sender's field.
 
In order to stop this, you would have to find the person using your email address and hang them by the neck until dead. ;)

1 more replies
Relevance 72.16%

Suddenly my surface pro 3 stopped screen rotaion auto. and the lock icon of screen rotaion on the right bar with the bright section disappered. Now ? can only change screen way with settings display section but couldnt find how to make it auto again or how to add the auto lock screen rotation button to right bar again. any help? thanks

Answer:My Surface Pro 3 auto screen rotation stopped. How do I make it auto rotate again?

IDK if it will help, but if an external display is connected or a type cover is attached (and in typing position), the surface is automatically locked in landscape. So, maybe try disconnecting either or both of those if connected. Probably won't help your situation, just thought I'd throw that out there.

more replies
Relevance 72.16%

Have had Y410p for years without this issue. Now when I move the mouse cursor across the screen, it auto clicks/auto selects (without me tapping or clicking) and then release automatically as well. It will do this continuously as I keep moving the mouse cursor with the Touchpad. This is super annoying and causes multiple issues with my ability do most things on my Lenovo laptop. The two biggest problems are: click buttons which I do not intend and selecting/moving icons & screens which I do not intend. And it makes it nearly impossible to use the laptop for gaming. I have downloaded and reinstalled the Touchpad ELAN driver (version 11.4.17.1 for my O/S Windows 8). I have gone through Mouse Properities setting and ELAN Smart-Pad settings. I have disabled Tapping, but does not make a difference. I have set Sensitivity to max Low and then max High, but does not make a difference. Any ideas on how to solve this particularly annoying Touchpad issue? Help please! Thanks.  

Answer:IdeaPad Touchpad issue with auto-clicking/auto-selecting when moving mouse cursor

Disable TAPPING in the Synaptic control panel. See the screen shot via the Device settings tab and properties. TAPPING is unchecked - a useless feature and a easy way to wreck and operating system and/or loose files. Its far too easy to tap drag and drop a folder or worst without realizing it until its too late. If its a system fie/folder you likely won't boot the next time or you kill an application. I have been diabling this on notebooks for decades. DEADLY feature.  





z70-80I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bitFHD 17.3 inch Display, Nvidia G840 w/2GB memory

3 more replies
Relevance 71.75%

Hi everyone,

We are currently running Outlook 2007 on all of our machines. Does anyone know if Outlook has the ability to add text to a message that is autoforwarded? We have email that comes into one mailbox, hits a rule and gets forwarded off to another mailbox. I want to know if there is a way to automatically add text into the body of the email when the message is forwarded. I have run through the rules and it does not look like Outlook 2007 has that functionality. If anyone knows if and how this can be done, I would greatly appreciate it.

Thanks in advance..
 

Answer:How to auto add notes in auto-forwarded Emails in Outlook 2007

please stick to one post on the same subject

https://www.pcreview.co.uk/forums/auto-add-text-auto-forwarded-emails-outlook-2007-a-t4034485.html
 

3 more replies
Relevance 71.75%

I would like to completely disable auto run / auto play in Windows Media Player 12 on Windows 7, and I cannot find a way to do so. I've searched the web endlessly, and there are lots of suggestions, but nothing works. I have disabled every type of auto run / auto play I can find, but if Windows Media Player is open and I insert a flash drive, CD, or DVD, whatever I'm playing is interrupted by what was inserted even if it's not media. Just a plain, blank flash drive does this.

Has anyone else been able to figure this out?
 

Answer:Windows 7 Media Player - Disable Auto Run/Auto Play

10 more replies
Relevance 71.75%

I dont know what happend to my sound. I need help badly. its getting so annoying with no sound. I looked at this forum and it told me do a lot of stuff to fix my problem but I didnt understand a word they were saying. :cry if someone can tell me what they were saying that will be a very big help. here is the forum:
http://forums.majorgeeks.com/showthread.php?t=160407&page=2

SET A RESTORE POINT BEFORE EDITING THE REGISTRY!

This patch is required before any of the HD device drivers are installed
1. On your PC change the CSDVersion registry key to reflect XP SP2:
HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=200
2. Restart your PC
3. Install KB888111xpsp2.exe http://couponmeister.com/blog/HD_Aud...88111xpsp2.exe
4. Change the CSDVersion key back to XP SP3 again:
HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=300
5. Restart your PC, finalize configuration of your PC, sysprep and capture.
(Not exactly sure what you must do here) This is a part from the forum that is abv.

that forum seems to showthe problem im facing but im not sure. and can someone tell me what is the system restore point? and CSDVersion register key?
 

Answer:Sound problem: Auto device on high defintion auto bus

:wave Welcome to Major Geeks! :major

Yeah, that is kind of confusing if you're not familiar with the whole process. Click this link for a MUCH clearer step-by-step complete with screen shots. Howver, this process is only if you have Windows XP with Service Pack 3 installed and you need to install KB888111 which is the Microsoft high-definition audio update. You cannot install this update with SP3 (it's built-in and therefore won't let you install it to repair or replace it). If you have Service Pack 2 or earlier, you don't need to follow the steps in the link I just provided. If you could please read this thread and then post again describing exactly what the problem is, we'll be happy to help.

To set a restore point: click Start, click Run, type %windir%\system32\restore\rstrui.exe and press Enter -OR- Click Start, go to All Programs > Accessories > System Tools > System Restore. This will open the System Restore interface. From here, it's very simple to set the restore point by simply following the on-screen prompts.
 

5 more replies
Relevance 71.75%

I run a server at night to run a program file and every now and then it crashes and comes up CLOSE program.exe as an error ( i turnred error reporting off - still comes up though)

Anyway since i cant get rid of this error message is it possible to have a prog to auto kill this when it crashes? OR

A prog that can restart the program/ process on a crash or hang?

Answer:Auto restart a process or auto kill on CRASH or HANG

Have a look in the Event Viewer through the control panel-> administrative tools. Look at both "system" and "applications" . If you can determine the program that is giving the error you will want to reinstall that troublesome program.

1 more replies
Relevance 71.75%

I've never been bit by this as I always save my work before walking away from the computer, but this may be of help to some of you.

Windows Update - Enable or Disable Automatic Restart

Answer:Stop Win7 Auto-update from auto restarting your computer

Thanks a lot for this! My Windows Updates have fallen probably a month behind because I don't have it on automatic for this very reason. If this "fix" indeed works, it might finally be time to change that!

3 more replies
Relevance 71.75%

Good day,
I use auto text and auto correct very frequently
Is there any way to put two columns in excel or access and programmatically import them to word ?

Thanks
 

Answer:Ms word 2003 : Programming auto text or auto correct

See this - Inserting AutoText Using a Script and i am sure you can take a clue from there. I think you just have to call the excel file (with cell references) using the script. Just want to share what i found. Since your question wasn't replied to by experts yet, i thought i could post some tips to get you started until an experienced person intervenes and offers a perfection solution.
 

2 more replies
Relevance 71.75%

Hello,
I use Windows 8 Pro and I have very strange problem.

I enabled display hidden and system files, but system auto-disable its... I make it about three times, always with the same result. I don't know what causes this problem, I can't reproduce its (it isn't after reboot).

Also I have similar problem with system restore.
I disabled it, but system turned it on again.

WTF?! Does my system better know what I need?!
I apologize for the tone, but it's really frustrating...

Answer:Hidden files - auto disable, restore auto enable?!

Hello lukasamd,

That's odd behavior.

You might consider resetting Windows 8.

7 more replies
Relevance 70.93%

The "Customize this Folder ..." and "Folder and Search Options ..." and "Properties" choices don't seem to do anything. So, I have two major headaches (at the moment): 1) How do I stop Vista's constant auto-sorting of folders? If I change a file name or add a few files to a directory it automatically resorts everything! This is extremely frustrating ... especially if I make a naming mistake and don't know where to find the file! How do I stop Vista until I--and only I--decide to refresh the folder?2) How do I stop Vista from deciding (always wrongly) what "Type of folder" a directory is and forcing its own display and sort criteria on it--actually them as it decides about EVERY folder and doesn't follow MY choices!Why can't Windows do what I need it to do?!? F & C

Answer:How do I stop auto-sort and auto-typing of folders?

Check here: http://www.smartestcomputing.us.com/index....showtopic=36574

8 more replies
Relevance 70.93%

LaptopWindowsDetails:I've had this just last night it started because i accidentally spat my coffee on the keyboards (I have 2 on because the other one is broken (The one on the laptop) I bought the other keyboard because its broken and its temporary gone so i'm typing as fast as i can it might come backIt auto types Shift,M and D

Answer:Why does my computer auto type (Auto Typing Virus)

Is there some reason you suspect a virus? If you spilt coffee on it then that's likely to be the reason you have keyboard issues. For now, remove the main battery then clean the keyboard with kitchen roll as best you can (especially between the keys). Afterwards support the laptop somehow and turn it so that the laptop keyboard is upside down. Keep it like that in a warm place and don't rush to use it for a few days. It might well need a proper repair.Keep watching for other ideas on this. Always pop back and let us know the outcome - thanksmessage edited by Derek

6 more replies
Relevance 70.93%

I have a nice little database that I set up to track donations of items to our organization. The primary table tracks the donor information: name, address, etc. (main form) and I have created a related table that tracks the date of donation and items donated utilizing a sub-form. Thanks to the fine help I received here I was able to relate these tables using a “Link_ID” field and it has worked nicely. (One donor could have multiple donations.)

Now, I’d like to enhance things a little bit. When I enter donor information into the main form and then go to the sub-form for the donation information, I’d like the business_name field to autofill as I start to type. Now, I know this can be done because most commercial databases have this function. Quicken is one that comes to mind. I know it has to pull this information from somewhere, I just need to know how to get it to work!

I have been unsuccessful finding any pertinent information on an “autofill” field in some sources. (I really don’t want a drop-down list box because this could potentially get too large.)

TIA.
 

Answer:Auto complete or Auto Fill field in Access?

Yes, well, unfortunately, in Access, the drop-down list is the only type of control that uses auto-fill, unless you want to use a text box and code (there's an example of that in the developer's handbook, but it's complicated).

No matter how big your list is, if you sort the underlying query alphabetically on company name, it will still autofill, and you can even build a not-in-list response to add new customers...

Make sure the auto-expand property of the drop-down (or combo) control is set to Yes, and you'll see that you never even have to drop down the list...
 

2 more replies
Relevance 70.93%

The other day i noticed that i dont have an autocorrect or autosuggest anymore. Its selected on my settings and i tried a soft reset but to nothing. Could it be related to the new developer's update? Im not sure if it disappeared before or after the update. If anyone has any suggestions please help me out. Thanks

Answer:Why dont i have an auto-suggest and auto-correct anymore?

Which version of 8.1 are you running? I'm running 8.10.14176.243 and am on DP. It's working fine on my version.

2 more replies
Relevance 70.93%

Does anyone know how to completely turn off auto capitalizing and auto correct in WPS Office?
I need the text to stay the way I type it, I don't want it to be "corrected".

p.s. I saw the options "Change Case", but when I choose "Sentence Case", the program returns to "Toggle Case" by default for some reason; also, tools>options>edit>auto correct doesn't contain/list all the changes that this program actually makes to the document, so I cannot uncheck them there...

THANKS IN ADVANCE FOR THE HELP!
 

More replies
Relevance 70.93%

I'm being reduced to a jibbering wreck by some of MSPublisher's Auto Correct features.Is there any way of changing the default so that Automatic Bulleted Lists and Automatic Numbered Lists (Tools/Auto Correct/Auto Format as you type) are opt in rather than opt out?

More replies
Relevance 70.93%

I have Windows XP on my computer, but still am using Outlook 2000.
Messages come in automatically at regular intervals, but when I send an email, I must click on the "SEND/RECEIVE" button, or it will sit there until I do! It doesn't send even when a new message is coming in.

What can I do to fix this?
 

Answer:Outlook 2000 auto-receives, but does not auto-send

Hi Indy and welcome to the forums,

I have no experience with Outlook 2000 unfortunately but I would assume you have a setting turned off - something along the lines of 'Send e-mails automatically'.

I think it would be in Tools > Options? I suggest just hunting around in there and checking various settings

Hope this helps,
Adam
 

2 more replies
Relevance 70.93%
Answer:La start computer apare mesajul autochk program not found - skipping AUTOCHEK

While this is an international forum and we try to assist everyone, the default language is English. I recognize your XP system is restarting, but we will need to ask you a lot of questions and we'll need the answers to be in English. If you can either get someone to help you translate or use an online translator, please do so.Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

1 more replies
Relevance 70.93%

all of a sudden, my computer keeps starting and restarting. i will get the message " auto-ck program not found. help!

Answer:Auto-ck scan not found

It is tryin to do a check disk scan.

Have you tried Safe Mode or going into last know good configuration?

9 more replies
Relevance 70.11%

Yesterday I downloaded a file that I believe infected my desktop computer (Bad Dobby! Dobby will have to punish himself most grievously).Avast did say it was scanning the download for viruses and then allowed me to save it to my desktop. Avast did not catch it until it had finshed downloading then it warned me of a worm. I imediately allowed Avast to deal with it (quarientine it) but almost instantly I lost internet connectivity and windows firewall was shut down. I use a router and my laptop can still connect to the web but I cannot get the desktop to connect through the same connection. I am using the laptop to download/post etc.Avast was up to date.I cannot run Kaspersky scan on the desktop as free version is online scan only.I have done a full Avast scan and it found the autorun.inf on both the C: and F: internal drives on my desktop. Avast quarientined both and I asked it to delete them. On reboot there is not change in the problem. Windows starts with the firewall disabled and I have no internet connectivity. I can manually restart Windows Firewall and have before any scans as instructed on the guide pages.I reviewed FAQ/guides on the site and noted 1. Unblock MBAM by following the directions in this self help guidehttp://www.malwarebytes.org/forums/index.php?showtopic=12709When I started RootRepeal I get the "Could not find kernel on disk (C:\WINDOWS\system32\ntoskrnl.exe)!"I hit OK and did a scan under file only and get e report that d... Read more

Answer:Avast Found BV:Auto Run-T(WRM) C:\autorun.inf

I apologize but I had to move forward on my problem as my family was without a functioning computer that they rely on for schooling. I realize it would have been preferred for me to wait for the input.I will provide a summary to help others (in particular the techs) and hope someone can direct me to the best place to fix a few of the odd remaining ?quirks? from this infection.I searched further on the ?Gaopdx? worm and found discussion of using MBAM and then ComboFix. I downloaded both to my laptop through the same router my desktop is connected to (as the desk top connection was still dead to the same router). I used a thumb drive to move the files to the desktop and tried to install MBAM. MBAM ?installed? but I could not load it. I followed each recommendation systematically that I found here http://www.bleepingcomputer.com/forums/lof...hp/t205093.html (see Feb 20 2009, 08:49 PM post)None of the suggestions to run MBAM (changing extensions and not using the mouse) worked.I then installed ComboFix. It asked me to install Windows Recovery Console but as a result of the infection the connection was down and this was not possible. I went ahead and ran ComboFix. ComboFix found and removed quite a few types of Gaopdx and after a couple of restarts during the running of ComboFix the computer is running fine now.I then ran MBAM short scan and long scan and the computer came up clean in both cases.The only scars left from the Gaopdx worm is Windows Firewall is always off when the co... Read more

11 more replies
Relevance 69.7%

Web pages that are designed to auto refresh, eg BBC sports livescore pages, have suddenly stopped auto refreshing. An example page is http://news.bbc.co.uk/sport1/hi/football/e...res/default.stm .Other people I know who use this web site are experiencing no problems.It may be coincidence but it seems to have happened since I ran ccleaner due to my P.C. running slowly.My OS is XP Home with IE7.Thanks(Moderator edit: added Topic Description. jgw)

More replies
Relevance 69.7%

Lately, my laptop (R61) auto turn on, auto restart ( when shut down) when it connect with AC power. I don't know what happen? Anyone can help me?

More replies
Relevance 69.7%

I'm troubleshooting sound driver issues and have come across something peculiar. I tried shutting off the auto driver update for windows because I do not want the specific drivers that they are going to use. In the screenshot you can see that an installation occurs even with the setting turned off. My question is, are these some default generic type audio drivers such that they will not interfere with the soundcard drivers? Is this some background type driver that will be installed regardless?

You can click on the picture to enlarge it up to enlarge it up to 1680x1050.

Thanks for help.

EDIT: Updated with screenshot
http://imageshack.us/photo/my-images...921165943.jpg/

Answer:No Auto Update is Auto Updating? Screenshot

Updated with screenshot. Sorry about that.

6 more replies
Relevance 69.7%

I am running windows 7 x64 ultimate and in the last couple of weeks my computer will not auto run anything. auto run box pops up and the immediately closes. I've tried setting the "turn auto play off" setting to disabled and I've made sure that every setting in control panel is set to "ask me every time". I appreciate any help you can give me. THANKS!
 

Answer:Solved: auto play auto closes

13 more replies
Relevance 69.7%

Assume I boot Win10 from an USB flash drive on various computers.

The max possible resolution differs from computer to computer.

I could always manually fiddle through the menus and set the current max.possible resolution manually.
But this is uncomfortable.

Is there a utility or cmdline command which searches automatically for the max possible resolution and set it up accordingly?

Peter

Answer:How to auto-detect and auto-adjust max.resolution?

theres a thing called EDID that should do it for you without any extra tools or command lines. its basic stuff for all the analog or digital video signals between pc and monitor.

things like bad / wrong cable can do the issues easily.

Extended Display Identification Data - Wikipedia

1 more replies
Relevance 69.7%

Hi there, I've successfully made an answer file on SIM that gets through the whole process unattended. However right at the end it always asks for user name-also it hasn't named the computer. Here is my answer file.


Code:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<servicing></servicing>
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-us</UILanguage>
<WillShowUI>OnError</WillShowUI>
</SetupUILanguage>
<InputLocale>en-us</InputLocale>
<SystemLocale>en-us</SystemLocale>
<UILanguage>en-us</UILanguage>
<UILanguageFallback>en-us</UILanguageFallback>
<UserLocale>en-us</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutr... Read more

Answer:Auto logon Auto unattend issue

Bump! So far 47 views and no replies-sorry I know double posts are not great but I is desperate.

1 more replies
Relevance 69.7%

My mouse keeps auto scrolling or auto zooming. For example: I visit Google Maps in Chrome/Edge and the mouse instantly zooms in. Or I open Explorer and the mouse auto scrolls down to the bottom of the window.

Does anyone know how to fix this? There is no indication of a virus. I am running WIN 10 (64 bit) on a desktop PC (no touchpad). All device drivers are up-to-date. I also swapped the mouse with a different one and the same thing happens (so that leads me to believe it's a configuration setting).

Any help is greatly appreciated.

More replies
Relevance 69.7%

I just ran across a problem with 10240. When I used my touchpad to move around the desktop, icons are automatically selected and started. The problem went away after a restart but now I am very careful using my touchpad. I think I may have to look and see if a new driver is available.

More replies
Relevance 69.7%

Good day to everyone,

I've bought some parts of my system (processor, motherboard, memory, graphics card) this January 2007. Here are the specs:

Intel Core 2 Duo E6600 2.4GHz
Asus P5B-Deluxe
2GB DDR2 paired Corsair XMS2 series (placed in interleaved mode)
Nvidia 7600GT 256MB 128-bit
4 Storage devices:
-1 Seagate 80GB SATA
-1 Seagate 250GB SATA
-1 Seagate 40GB PATA (master)
-1 Sony DVD-Writer (slave)
535 Watts Enermax EG565P-VE 24P
Samsung 19" 940BW (connected using DVI)
Leadtek Winfast TV2000 Tuner (PCI)
Standard A4Tech PS2Keyboard
Brandless USB optical mouse
Windows XP Service Pack 2

The problem started two days:
-the system randomly resets itself at random stages of boot/use: before POST could begin (before the first beep when the basic info on the graphics card is displayed); during POST; in the BIOS setup; after POST; during OS startup; OS running, idle or in use.
-at random, either after an auto-reset or manual power-on, the system will immediately (before the basic info on the graphics card is displayed) auto-off for 3 seconds then auto-on.
-at random, after an auto-reset, the screen will just be blank and the power button won't work, even after pressing it for more than 4 seconds.
-at random, though seldom but only after an auto-reset, BIOS would report that I have misconfigured my overclock settings (sorry, I can't recall the exact statement) even though i have never overclocked my system or tampered w/ the timings and voltage settings.... Read more

Answer:System randomly auto-reset and auto-off/-on

Fans look like they cannot take the whole heat. Can you get more fans installed on the case. My computer runs at about 30 idle and about 37 just after gaming.

2 more replies
Relevance 69.29%

Hi,

I want to have a program (B) close automatically when I quit another program (A).

I have created a .bat file, and it looks like this:





start "" steam://run/220260
start /min "" "C:\Program Files (x86)\Orekaria\Gamers Window Relocator\GamersWindowRelocator" GamersWindowRelocator.exe
exit



What I would like to do it have the "GamersWindowRelocator.exe" (B) quit automatically when I exit/quit the first program (steam://run/220260) (A), witch is a game.

Is this possible in CMD?

More replies