Computer Support Forum

bootup program application control

Question: bootup program application control

how do i stop notepad from appearing at bootup

Relevance 100%
Preferred Solution: bootup program application control

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: bootup program application control

Hi and welcome,
Click start, run, type msconfig, go to startup, un-check notepad, reboot pc. When you boot back there will be a box telling you you made changes and how to un-do them, just check do not show again.

1 more replies
Relevance 74.62%

If I block a process in application control, does that mean it is blocked from the very beginning, or only after kaspersky loads?
 

Answer:Kaspersky Application Control and Bootup

Check this, taken from online help of K2017:




Change trust group for applications started before startup of Kaspersky Total Security

Clicking this link opens the Trust group for applications started before startup of Kaspersky Total Security window. In this window, you can change the trust group for applications started before startup of Kaspersky Total Security. Network activity of applications started before the startup of Kaspersky Total Security is controlled according to rules of the selected trust group.

By default, applications started before the startup of Kaspersky Total Security are assigned to one of the trust groups based on the rules created by Kaspersky Lab.Click to expand...


 

7 more replies
Relevance 52.07%

When I start up Windows XP, I get theis message:The C:\WINDOWS\system32\vnmdke\csrss.exe application cannot be run in Win32 mode.When I clikc OK, it says:Could not load or run 'C:\WINDOWS\system32\vnmdke\csrss.exe' specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry. I looked for the folder, vnmdke, and could not find it. I set my folders to show hidden files, and it was nowhere to be seen. Any ideas?

Answer:Bootup problem with csrss.exe application.

Insert your XP CD into the CD drive.From the Start Menu select Run and type command and hit enter.At the command prompt type sfc /scannow ...just as it is typed here and hit Enter.Be patient let it do it's job.patio.   8-)

14 more replies
Relevance 51.25%

I have some programs that start on bootup. I run msconfig and can uncheck them so they won't start but each time I bootup I get the screen that I used to uncheck the programs. The programs can not be found in the add/remove list of programs. Going to start, right click, explore all users, programs, startup, the programs are not listed. So how do I get to the place where I can control what starts and what doesn't. It seems that the system has a mind of its own. I have run Spybot and repair all it gave me.
 

Answer:How do I control programs that start on bootup?

8 more replies
Relevance 49.61%

How do i run SRVMGR.EXE on a Windows 7 box to manage Windows XP and Windows 2003 server.
This tool runs on Windows XP but not on Windows 7.

Answer:Application popup: SRVMGR.EXE - System Error : The program can't start because NETUI0.dll is missing from your computer. Try reinstalling the program to fix this problem.

Hi,
To run Server Manager on Windows 7 you need to download and install the Remote Server Management toolkit from MS.

Info link:
http://technet.microsoft.com/en-us/library/dd759202.aspx

Download link:
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=7887

Hope this helps.Spencer
TechNet Community Support

2 more replies
Relevance 49.2%

I have been using Add/Remove icon in Control Panel to remove programs. Although the Win2k Pro is running fine ,the icon of Add/Remove Program is not opening the next window to remove the programs.
Can anyone help me?
MZR Siddiquee
 

Answer:Clicking Add/Remove Program icon in Control Panel does not start the Program

13 more replies
Relevance 48.79%

I am installing SP3. My anti-Virus (Pareto) popped up a window saying that this program: cmd.exe /C "cscript %systemroot%\Installer\TSClientMsiTrans\tscuinst.vbs has been configured to run at startup and could potentially be malware. Is this a MSFT SP3 program? If not, is it malware?
 

More replies
Relevance 48.79%

Hi! Need some help here too, hopefully this question will get answered?? I don't know a lot about computers, been infested with everything. I was in Control Panel looking over whats there (vista) I have two programs I don't recognize 1. NVIDIA DRIVERS (no publisher) 2. BROWSER ADDRESS ERROR REDIRECTOR (no pub.) Are these legit? Do I need to uninstall or are they programs which should be there? Thanks
 

Answer:Not comp. saavy, new, ? w/control program-is this a real program?

Yes they are legit.
But if you worried about been not infected read this:http://forums.majorgeeks.com/showthread.php?t=35407

Good Luck,And welcome to MJ!!!!!
 

4 more replies
Relevance 48.38%

Is there a way to setup the T400 on bootup to use the fingerprint program instead of the password?

More replies
Relevance 48.38%

I have an old program (sidekick) which runs on Win7. How can I make it run automatically when system boots?

Answer:make program run at bootup

Start - All Programmes - Startup.
Just drag the .exe file of your programme to the startup folder.

1 more replies
Relevance 47.97%

I need a command line program that can add another program to automatically load when Windows XP loads. Probably by editing adding a registry key at HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Anyone know if there is a program that can do that?
 

More replies
Relevance 47.56%

Hey all, I'm designing an application that auto-updates with another application. The problem is, I didn't design the app that it's getting data from, so I don't know how to identify the textbox my program is supposed to monitor. If you have a library or know the API call, please help me.

 

Answer:Get name of a control in another application using VB

bump
 

2 more replies
Relevance 47.56%

Part 1
.Introduction
.What you need to know before searching for alternative security approaches
.The components of modern security products
.Application control as a key tool for securing corporate networks
.The balance between freedom of action and security
.The traditional approach to protection: Default Allow
.Default Deny mode

Introduction
Corporate network security is one of the most pressing issues for companies today. Malicious programs can cause substantial harm to a business, and a firm?s reputation is not the least of its worries. Companies specializing in IT security offer a variety of costly solutions, although in many cases, installing these solutions can actually lead to a steep increase in network maintenance costs. However, traditional security solutions cannot always provide guaranteed protection against unknown threats ? especially when it comes to targeted attacks.

This article addresses an alternative approach to protecting corporate networks: the Whitelist Security Approach.

This approach continues the developments in launch control technologies (otherwise known as Application Control) which add Default Deny mode support and innovative new whitelisting technologies, or Dynamic Whitelist.

At Kaspersky Lab, we believe the Whitelist Security Approach is one of the key elements of protection for corporate networks of the future. Products that use this approach are capable not only of protecting a network against unknown threats but also offer netwo... Read more

Answer:Application Control:

Part 2
.It?s brilliant ? but is it user-friendly?
.New developments in Application Control
.The Dynamic Whitelist
.From theory to practice: Kaspersky Lab?s Endpoint 10
.Conclusion

It?s brilliant ? but is it user-friendly?

The idea behind Default Deny is very simple and logical. However, until now this approach was focused exclusively on a very narrow target audience. This was primarily because of the technical challenges arising on the road toward developing a solution that would be appropriate for broad use, and without a number of critical limitations.

Dynamic Whitelist. Kaspersky Lab currently works with several hundred international partners and tens of millions of participants in the Kaspersky Security Network global data network, in addition to an extensive network of automated search agents. Combined, these components provide continuous updating of Kaspersky Lab?s dynamic knowledge bases, with an average of over one million new files per day.
The quality of Kaspersky Lab?s Dynamic Whitelist was proven in an independent test conducted by West Coast Labs. The study showed that Kaspersky Lab?s database contains data on 94% of all clean software released around the world.
It is necessary to carefully control all of the programs entered into the Dynamic Whitelist, and most importantly to keep its reputation up to date. A program classified as ?clean? today can, after more careful analysis, turn out to be a carrier of threatening malicious code t... Read more

1 more replies
Relevance 47.15%

My STARTUP folder is empty. But, I used to know a command that allowed me to change which programs get launched upon booting up. Anyone know what that is?

Thanks!
 

Answer:What command to use to get rid of program auto-launching at bootup in XP?

msconfig

or

http://www.mlin.net/StartupCPL.shtml

or

http://www.sysinternals.com/ntw2k/freeware/autoruns.shtml
 

2 more replies
Relevance 47.15%

I recently installed a program called Zortam Mp3 Media Studio which I haven't tried using yet. Every time I boot up, the program starts even though I never created a shortcut in any Start Up directory. Can anyone tell me where the program's shortcut is that is starting it at bootup and how to stop it doing this?

Thank you,
.....Gord
 

Answer:Solved: Program starts at BootUp; how do I stop it?

Best way to do this I think is to go to Start,Run and type in msconfig in the box ...then click on start up and unclick the offending program in the list that appears then click ok ...you will get a reminder when you next boot up but you can just ignore that ...
 

2 more replies
Relevance 47.15%

I currently have my screen resolution set to 1680x1050. I would like to run certain applications such as Mozilla Firefox in a maximum resolution of 1280x'1050' and Microsoft Word at 1024x'1050'. (I don't like to do it manually everytime, because I 'automatically' keep clicking on the 'Maximize' button :P)

I was just wondering if there is an application out there, which makes this possible?

More replies
Relevance 47.15%

If I enable TAM and allow a file to run (add an exception), I notice the file is added to the Low Restricted category on Application Control. Does this mean that not only does Kaspersky TAM act as a default deny, but also places exception unknowns with restricted rights in Application Control too? If so, pretty cool stuff.

Thanks!
 

Answer:Kaspersky TAM and Application Control?

Yes, TAM also is provided with white listing and KSN data to assign a trusted group for an unknown application:

How to enable or disable the Trusted Applications mode in Kaspersky Internet Security 2016

Anyway if You know that unknown application and trusts on it You may move it to Trusted group.
 

3 more replies
Relevance 47.15%

Hey,

which settings do you use if you configure application control? Is "automatic mode" really secure?
 

Answer:Application Control - Settings

I found some help on their site, expand to see more info: http://support.kaspersky.co.uk/9732 (v2014)
 

1 more replies
Relevance 47.15%

I have f-secure the application control keeps coming up and telling me that "javaw.exe is trying to connect to the internet. First is this a bad thing?, and second how can i correct this? Thanks for the help.

More replies
Relevance 47.15%

im havin a windows xp sp2 pc. recently when hearin 2 music, i wanted 2 open a cd. but it ws havin background music. so, i had 2 pause the music. is there a software to control sound per-application in XP???????????

Answer:Volume control per-application in XP

Go to Control Panel/Sounds and Audio Devices/Volume Advanced. This opens the sound mixer. The WAVE slider plays streaming music from YouTube the internet and other audio files from your computer. CD Audio plays music from your CD player.

1 more replies
Relevance 47.15%

Win 10 64 Pro Anniversary Build Latest Update
Kaspersky Internet Security 2017 Latest Update
No other RealTime security software.

My portable programs SecurMyBit, VidCoder, etc... were under "Low Restricted" in Application Control.
I move them to "Trusted" in AC.
After couple of days, the programs rules are neither in "Trusted" or "Low Restricted".
When I run the programs, they appear under "Low Restricted" And I again move them to "Trusted" But after couple of days the same mentioned above i.e the programs rules are neither in "Trusted" or "Low Restricted".

Is it a bug or bug on Win 10 64 or bug in KIS 2017 or ............?

Any info?

Any Kaspersky users experience the above?
 

Answer:Kaspersky Application Control

Yes, this happens & not only in 2017 but in earlier versions as well.

I experience it as well, but not quite often as you are. Mine comes when i am disconnected from internet for a while & then connect again, then (i guess) KSN checks the app control rules again & places them (apps) as described in the KSN rule-set.

The problem come from the setting 'Load rule for applications from KSN' in application control, which is enabled by default.

This shouldn't be a problem if you are using default settings (Auto-mode) as Low restricted is basically Trusted in auto-mode. But if you use interactive mode, this causes a lot of prompts which can be quite annoying.
 

1 more replies
Relevance 46.74%

Hi

I just wondered if anyone here had an idea of the best application control setting for kaspersky that offers the best protection?

Tony
 

Answer:Kaspersky Application Control Setting???

Hardening privilege control mode
Most of the widely used programs are automatically placed in the Trusted category, because they either have a digital signature of the manufacturer, or are included in the KSN Allow list. This allows toughening the restrictions for the other programs: they can be automatically moved in the High Restricted orUntrusted category. In the latter case, KES will automatically block the start of unknown programs that have no digital signature and for which there are no allowing rules within the policy. If a program necessary for work is blocked, you can configure an exclusion for it.Click to expand...

http://support.kaspersky.com/learning/courses/kl_102.98/chapter3.1/section2

Set to untrusted for any unsigned application instead of heuristics analyzer by default that chances are going to low restricted or high restricted which sometimes can execute the program in all matters.
 

7 more replies
Relevance 46.74%

I have a game "Atlas Reactor Live" that will not uninstall from programs and features, I can't seem to find it anywhere on my hard drive either, is it safe to assume that it's gone and just won't uninstall?

Answer:Cannot uninstall an application from control panel

What's the error message you receive when trying to remove it?

Did you check in Program Files, Program Files (x86), AppData\Local and AppData\Roaming ?

6 more replies
Relevance 46.74%

Win 10 64 Pro Anniversary Build Latest Update
Kaspersky Internet Security 2017 Latest Update
No other RealTime security software.

My portable programs SecurMyBit, VidCoder, etc... were under "Low Restricted" in Application Control.
I move them to "Trusted" in AC.
After couple of days, the programs rules are neither in "Trusted" or "Low Restricted".
When I run the programs, they appear under "Low Restricted" And I again move them to "Trusted" But after couple of days the same mentioned above i.e the programs rules are neither in "Trusted" or "Low Restricted".

Is it a bug or bug on Win 10 64 or bug in KIS 2017 or ............?

Any info?

Any Kaspersky users experience the above?
 

Answer:Kaspersky Application Control - KIS 2017 bug?

Yes, this happens & not only in 2017 but in earlier versions as well.

I experience it as well, but not quite often as you are. Mine comes when i am disconnected from internet for a while & then connect again, then (i guess) KSN checks the app control rules again & places them (apps) as described in the KSN rule-set.

The problem come from the setting 'Load rule for applications from KSN' in application control, which is enabled by default.

This shouldn't be a problem if you are using default settings (Auto-mode) as Low restricted is basically Trusted in auto-mode. But if you use interactive mode, this causes a lot of prompts which can be quite annoying.
 

20 more replies
Relevance 46.74%

Hi all,

I am after a way to add some tweaking programs to the control panel.

I have searched on google and come across this program for Vista & xp but am a little apprehensive about using it in case it nukes my install somehow.

Thanks,

More replies
Relevance 46.74%

it was working now i go to control panel and it opens but none the stuff in it can be found. it says application not found.

Answer:my control panel doesn't says application not

If this is definitely recent, try system restore to a prior date when all was working properly.

2 more replies
Relevance 46.74%

Everytime I start my PC this message pops up

I always click Make Trusted so that it will move it to the trusted group but it just keeps on popping up!

It also tends to pop up when I am watching TV via Media Centre and there are the odd occassions when others pop up ie Windows Search, msn etc.

I assume it is not being moved into the trusted group (otherwise it wouldnt continue to keep popping up every hour or so) but I am not sure how to do this manually.

To be honest, I am not even sure what this application is!

Any advise would be greatly appreciated.
 

Answer:Solved: Kaspersky Application Control

8 more replies
Relevance 46.74%

I am trying to open the add/remove icon in control panel and keep receiving message fpqx.exe not found cannot open application. I tried opening several other icons on this particular computer in control panel and get the same message. The computer uses OSWindows 98.
 

Answer:application message in control panel

I've no idea what fpqx.exe is, can't find anything on google search about it . . .

but it sounds like a virus to me.

Make sure you've got the latest definitions for your A-V software
and run a full virus scan.
Better still, run an online scan at one of these places:

http://housecall.trendmicro.com/
http://www.pandasoftware.com/activescan/com/

It sounds as though your registry has been modified so that *.cpl files open with fpqx.exe instead of rundll32.exe

Folder Options -> File Types tab -> CPL (Control Panel Extension)

I'm not sure what the default command line is in Win98, but in WinXP it's:

rundll32.exe shell32.dll,Control_RunDLL %1,%*

Hopefully, a Win98 user will come along and tell you what the correct Win98 command line is. Then you can edit the entry yourself and the problem will be fixed
 

1 more replies
Relevance 46.74%

hello dear bleeping computer helpers.... i have a problem and i cannot solve it... i hope i am posting in the right part of your forum... i have lost almost all nerves trying to figure out what is wrong, and i cant seem to figure it out.Everything else works fine except the panda activescan which worked fine until 2 weeks ago... i havent done nothing to make activescan not work coz i only use IE for activescans (coz of activex controls)... now it displays message "Not allowing the application's ActiveX control to be downloaded" every time and i cannot see if i have a virus.... it does the same with HouseCall so i am completely vounreable.Here is my hijack this log:Logfile of HijackThis v1.99.1Scan saved at 2:45:22, on 26. 06. 05Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\PROGRAM FILES\EMULE\EMULE.EXEC:\PROGRAM FILES\PROCESXP\PROCEXP.EXEC:\WINDOWS\SYSTEM\WMIEXE.EXEC:\WINDOWS\SYSTEM\DDHELP.EXEC:\WINDOWS\SYSTEM\SPOOL32.EXEC:\PROGRAM FILES\MOZILLA FIREFOX\FIREFOX.EXEC:\PROGRAM FILES\INTERNET EXPLORER\IEXPLORE.EXEC:\PROGRAM FILES\TOTALCMD ... Read more

Answer:Not allowing the application's ActiveX control to be dl-ded

Hi Symon and Welcome!I dont see anything Malicious in that log!Lets try this,Please Download the MWAV Scanner from HereUnzip it to its predetermined Directory (C:\Kaspersky)Locate "kavupd.exe" in the New Folder and Double Click to Update!If you it says the signatures are more than 30 days old, keep trying!Keep trying until you get the actual signatures!When you see "Updates downloaded Successfully" Please Press Enter to Continue!It should open automatically>Leave the "Default Settings ticked" and add a "tick" "Drives">this will light up "All Drives">Click "Scan Clean" to begin!This Scan will take Several Hours or more to Complete,Depending on the Hard Drive Size!Please be sure it is Completed before proceeding!Once the Scan has finished,All entries Identified as Infected will displayed in the lower pane!Highlight everything that is inside the lower pane and press Ctrl+C at the same time to Copy!Open a Blank Notepad Page and Paste the results (Ctrl+V) to it!Post those results back here!Run MSCONFIG and enable everything in the startup area. To get to MSCONFIG, click on Start -> Run -> type in MSCONFIG -> click OK!Under the "Startup" TabBe sure every box has a check in it!!Click Apply>>Close>>Follow the Prompts to Restart!!Post a fresh HijackThis log along with the Scan Report!

1 more replies
Relevance 46.74%

Recently, while surfing the net, I discovered that a program called "curb send.exe" was prompted to run. Since I have Comodo Antivirus, I used the HIPS Application control to block it. Now, every time i start up the computer, the application control alert pops up every few seconds. When i allow curb send to run, i get continuous pop ups. I have run SAS and Malwarebytes, but both searches yielded no results.
What should I do?

Answer:Hips Application Control Alert

Hello, have you run the SAS scan from safe mode? This appears to be a form of a LOP (Live Online Portal) infection.Please look in Control Panel Add/Remove Programs for "Messenger Plus! & Sponsor" tell us if you find it.Is this an XP or Vista PC?Please uninstall any of the following program(s) using Add/Remove Programs if they are present. To do this, go to Start > Settings > Control Panel and double-click on Add/Remove Programs. From within Add/Remove Programs highlight each one and select Remove.NetpumperBitRollCiD HelpCiD ManagerDownload Plugin for Internet ExplorerZone MediaBe sure to reboot when done. Please download NoLop and save it to your desktop.alternate download link 1alternate download link 2First close any other programs you have running as this will require a reboot.Double click NoLop.exe to run it.Now click the button labeled "Search and Destroy"
<>When scanning is finished you will be prompted to reboot only if infected. Click OK.Now click the "REBOOT" button.A Message should popup from NoLop. If not, double click the program again and it will finish.Please post the contents of C:\NoLop.log in your next reply.--If you receive an error: "mscomctl.ocx or one of its dependencies are not correctly registered", please download mscomctl.ocx to your system32 folder then rerun NoLop..

13 more replies
Relevance 46.74%

Hi,I already post it on the "Am I infected? What do I do?" section and cryptodan told me to post here.The link to my initial post is here where you can get the full detail about the problem.I have an Application on the volume control and it gives music but its always muted and I cant unmute it. Sometimes it's unmuted but the only thing it does is Give a wierd "pop" sound and a door closing sound.Screenshot with the unknow application:I scanned my computer with malwarebytes and it found 13 trojans on my temp folder then I removed it.Then I tryed to run ComboFix since I used it on my intership for solving malware problems but it just stuck.cryptodan told me to follow this Guide but DDS stuck as ComboFix does and the only way to use my computer again is restarting it so I was unable to get a log file from DDS.My OS is Windows 7 x86 Home Premium.

Answer:Unkown Application on volume control

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

2 more replies
Relevance 46.74%

I am trying to provide an interface to control an application I created (3 perl processes).

I can start them from batch file (start /B), but once I do that I don't know how to identify them to either verify they are running or terminate them (killtask - but it wants PID or image, which in my case is perl - not well qualified enough to go killing processes)

Is there a way that I can start processes, verify they are running and terminate them from batch files?
 

Answer:Automated control of application tasks

There is probably a perl process that can handle this, but I have no idea if there is or how to call it.
 

1 more replies
Relevance 46.74%

I am using Zone Alarm Free Antivirus plus Firewall version 12,0,104,000
There are 870 programmes secured in the Application Control, some appear more than once, and I am not sure which of the multiple entries to remove. Also there is an entry...
Advanced Control Enable Microsoft Catalogue Utilization what is this?
Also under OS Firewall there is "enable OS Firewall" and it is ticked, do I need this enabled?
Should I be sunning the OS firewall and ZoneAlarm?
Are all these enteries slowing down ZoneAlarm?

Answer:Zone Alarm- Application Control

What OS are you running; for Win7 and Win8/8.1 you are best to use the built in Windows firewall.
You should not run more than one firewall; therefore either the OS one or ZoneAlarm in your case.
As far as removing the multiple entries, I personally would not do so as there are various components to individual programs.
From: ZoneAlarm Forums :
"Enable Microsoft Catalog Utilization
When enabled, prevents alerts for programs that are cataloged by Windows as known and trustworthy. Enabled by default. (Depending on your settings, ZoneAlarm may still alert you about such programs if they attempt to act as a server outside your Trusted Zone.) "
If you decide to uninstall ZoneAlrm then ZoneAlarm Uninstall 12.0.118.000 Tool

2 more replies
Relevance 46.74%

Im looking for a small tiny application who limits all internet access on applications or control maximum bandwith usage with a small slider or something similiar

anyone came over such a freeware? it only needs to have for example

name: skype.exe" bandwith usage "low=100kb/sek" "medium=200kb/sek" large=500+ or and maybe 0=infinite bandwith usage

so i easy can control my skype calls when im gaming etc. My router doesnt have that simple rules to apply to.. tried but without success and tried netlimiter but dont like all the options.

Maybe a unofficial opensource app just simple simple

Thanks guys hope ill find it

More replies
Relevance 46.74%

Hi.
i have database in sql 2000. i would like to make a user aunthication control to access my database aganist user name and passwod supplied. the database have all the tables to aunthicate the user.what i want to know is how i can develop login form with user name anad password feild and access the database aginst the user name i gave. e.g administrator.

a detail discription would help me.
thanks
 

Answer:VB 6 Database application login control

Create a form with two entry fields -- one for the user name and one for the password. Don't make it the startup form but instead show it from the Form_Load event procedure in your main form. Capture the user name and password and return it to the frmMain.Tag property. Once you're back to the main form, login in to the database using the supplied credentials.
 

1 more replies
Relevance 46.74%

I am trying to help someone with a Win XP computer. They are trying to set it up for basic internet/skype functionality but also wants parental controls in place. She uses FireFox and from my preliminary research there appears to be no built in parental control options. It looks like there are quite a few extensions available to accomplish this but i think the extensions can be easily removed/disabled by any user (without Administrator control). I was wondering what steps i could take on XP to require the Admin's approval to remove/disable extensions in FF or to uninstall FF or other applications. Also i want it to require the admin's PW if someone wants to install any applications. Does XP offer anything for this?

Answer:Limit Application Control to non-Admin

Create a limited account that the children must log into. The Admin user would have to approve of any software or updates to be performed. Setup Parental Controls
Then setup Parental Controls on Firefox
Setting Up a Limited User in Windows XP - YouTube

1 more replies
Relevance 46.74%

How can I assign audtio devices per-application in Windows 7?
 
I'm not looking to change the default audio, I am looking for a way to change per application what sound system they run on.
Example.
I want my Vent/TS/Skype/Mumble on my headset
My game on my speakers
Netflix on the TV(through HDMI)
And music on a 2nd set of speakers
While Vent/TS/Mumble/Skype allow in application device control other programs do not, how can I get this functionallity in all programs?

More replies
Relevance 46.74%

HELP! HELP! HELP! I am using a different pc for this forum as my Win XP laptop has spat the dummy. I have run AVG antivirus and removed some threats however, I cannot run ANY application with a .exe extension. Error message is "This file does not have a program associated ....".

What to do???

HELP!
Benji
 

More replies
Relevance 46.74%

Full question: How to add a new/duplicate volume control in the 'Volume mixer' (aka application specific volume control) in windows 7? specifically, how to add another duplicate chrome to control different sounds in different tabs.

example: opening 2 tabs: 1 youtube, 1 hulu in chrome and having two 'Google Chrome' applications in volume control so I can mute one and keep the other one still playing with sound.

I've done it before, but I'm not sure HOW I did it, I just know its possible. Sometimes when i open another video it just automatically does it, and sometimes it doesn't.

I just want to know if there's a specific way to do it, unless its just a bug then I guess I'm just screwed and have to install another chrome.

Answer:how to duplicate application in volume control

Don't think there's a way to 'duplicate' the volume controls. Sometimes when you mute videos and start another 1, the browser saves the setting so the 2nd stream auto mutes, may be this what you did?

You can also check out this addon Flashblock, it blocks the (flash) content from automatically streaming.

1 more replies
Relevance 46.74%

Hello, I am looking for a program that would allow me to adjust the volume of different applications (and master) using hotkeys (+mouse wheel) in Windows XP.A few programs come close, but either don't have application control or don't have hot-keys. If anybody knows of such a program please share,Thank you!

Answer:Per application volume control in WIndows XP

Unless the programs you're using have their own volume controls, this isn't possible, except as a master volume control which Windows already has.

4 more replies
Relevance 46.74%

Has anyone made a sound changing app where you can change startup/shutdown sounds ect?

Can you via registry and other tricks get sound to happen on fast boot and resume?

I wonder if I could get windows task scheduler to do it...mmmm

Answer:Windows sound control application

2 more replies
Relevance 46.74%

When I do a right mouse click on my display (to look at my screen settings) I get the following error message:

NVIDIA control panel application, 3.3.532.01 has stopped working

My system:
OS Name: Microsoft? Windows Vista Home Premium (32bit)
Version: 6.0.6002 Service Pack 2 Build 6002

How can I fix this problem?
I have attached a image of the error that I see.

Answer:NVIDIA control panel application

Welcome
I would start with the graphics driver
Go to device manager, make sure that the graphics driver is up to date and that no yellow markers are anywhere to be seen.
Make sure the the tree, in the left panel, is not open anywhere and open tree indicates a problem in that area.

4 more replies
Relevance 46.33%

Does anyone know where I can find a free download to create a bootup disk for Windows 2000? Thank you.
 

Answer:Download Program To Create Bootup Disk For Windows 2000

http://www.bootdisk.com/bootdisk.htm
http://www.allbootdisks.com
 

2 more replies
Relevance 46.33%

Hi Everyone,

I have a problem with Windows Installer in that it tries to install Roxio Media Creator on boot up and everytime I try install a program. Even when I try to uninstall a program I get a message saying to complete the installation before proceeding with the uninstall. The same thing occurs when trying to install a program.

Can someone please help me with this problem. Thanks.

Byn
 

Answer:Windows Installer Starts at Bootup and won't allow installation or removal of program

You may want to check your startup settings that start in Windows or the following link may guide you in the right direction http://support.microsoft.com/?kbid=310560.
 

1 more replies
Relevance 45.92%

a problem caused the program to stop working correctly. windows will close the program and notify you if a solution is available

Answer:catalyst control center host application has

It might not be a virus.Tap F8 key while booting and select Safe Mode. If it boots then (to a rather unusual looking desktop) then it's more likely to be a graphics driver issue.Please do not post then vanish - let us know the outcome

2 more replies
Relevance 45.92%

Hello there, I am in need of some help. I recently cleaned out some unneeded applications on my control panel, and restarted my computer, but now I've lost my volume control/ dimmer control. There use to be a little black box that would pop up whenever i increased or decreased my volume or dimmer, but now its gone. I would like to have that back. I don't remember the application i deleted. Any help would be appreciated. Thank you.

Answer:Need help, deleted application, and now no volume or dimmer control.

There's proprietary software that provides this functionality. You may need to scour Lenovo's website for downloads of this nature, or contact them directly to see if they can provide you with a download. Or if the laptop came with backups of this kind where you can install the various software from CDs, then start looking.

9 more replies
Relevance 45.92%

upon start up a message appears 'catalyst control centre host application has stopped working'. How do i remedy?

Answer:catalyst control centre host application not

Maybe uninstall it and re-install it. Or if it just happened a bit ago you might try a restore point.1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.

4 more replies
Relevance 45.92%

I run a lot of applications that transfer data over the internet and lately I've been wondering if there's such a thing as an application that will "dynamically control my bandwidth?" By this I mean that I'd be able to manually set how much bandwidth a particular application is allotted. This would give me greater control over transfers and would allow me to place a higher priority on transfers that are more important than others. A tool that could do this for me would be very useful.

Any suggestions? TIA.
 

More replies
Relevance 45.92%

Theoretically speaking, if different types of malware files where to penetrate past Kapsersky's protection and get placed into "Low Restricted", how much damage is possible under default settings?
 

Answer:Kaspersky Policy Based Application Control

Theoretically speaking, damage same as trusted group. Low restricted is basically trusted group in default settings (Automatic mode). Application control is for interactive mode, in which the prompts gets issued, then Low restricted is useful as much as the user knows.
 

1 more replies
Relevance 45.92%

I know that the setting "allow application to take exclusive control of this device" can be changed by going to the properties of the playback/recording device and unchecking the box, but is there a way to change this setting via the registry
or a GPO (for large-scale managed changes)?

Answer:Allow Application To Take Exclusive Control Of This Device via Registry

Hi,
I have tried to determine the registry changes when clear/select the option, and the result here seems this action mostly related with the device drivers, couldn't find out any generic registry controlling this device related behavior.
So back to your question, there seems to be no way to change this for large-scale managed.

Best regardsMichael Shao
TechNet Community Support

4 more replies
Relevance 45.92%

I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.

When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:

There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel 

Answer:There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

Louis,This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then press ENTER.
In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
Select the subkey, and then press DELETE.
Click Yes.
Quit Registry Editor.
Start Outlook.
On the Help menu, click Office Diagnostics.
Follow the instructions on the screen to complete the repair.

Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.Hope above information helps.

Pooja Katiyar

18 more replies
Relevance 45.51%

How To Turn Off User Account Control (UAC) For A Specific Application i am using windows 7 and mcafee anti-virus i m geting tat question every time i use it....it s irritating!!!!

Answer:How To Turn Off User Account Control (UAC) For A Specific Application

Hi,

You may find this post helpful
Can you turn UAC off for a specific program?

Regards,
Jamie

1 more replies
Relevance 45.51%

recently whenever i try to open ntune i get an error saying
nvdia control panel application, 2.2.390.00 has stopped working
this is very annoying because i am unable to get the full potential of my card.
i have vista basic 32 bit. this problem started a few days ago out of the blue.
as said bfore i have windows vista basic 32 bit. i have a geforce 8600 gt. ive tried uninstalling ntune and reinstalling it. i even tried dl'n it to see if that would help, but it didnt(i alrdy had the latest version).
 

Answer:nvdia control panel application, 2.2.390.00 has stopped working

Have you also uninstalled and reinstalled the latest NVidia Display drivers?

http://www.nvidia.com/Download/index.aspx?lang=en-us
 

2 more replies
Relevance 45.51%

Now that Bitdefender announced there Application Control Whitelisting feature for the business solutions, do you think it is necessary to implement it in the home products?

What is your opinion about Application Control / Whitelisting and will it become an important layer of defense in the future?

"With more than 450,000 unique malware samples a day, mostly targeted at infrastructure or departments that play key roles inside the organization, the Application Control Whitelisting technology can allow IT managers to keep all threats at bay by default-denying the execution of unknown software."

You can read the full article here.
 

Answer:Bitdefender - Application Control Whitelisting for Home users - Need it?

It would never be a bad decision to integrate this into their home products. If it is provided as an option, the users that want it have the ability use it while the others just keep it disabled. Panda has a similar application control too in their products and I'm really a fan of it. In their products it's also disabled by default. You can easily control which executables run and you prevent that malicious applications can sneaky launch and infect your system. Of course this is something not every user wants to do. I can assume that the average 'not so technical minded' home user wouldn't be happy to need to allow each new executable that launches on your computer, but personally I really like this approach. Also if they make it 'self learning' that already earlier allowed exe's can start without warning, it's more comfortable to use it. You keep full control and prevent even the launch of malicious exe's where the AV doesn't have signatures for. It probably wouldn't become an important layer for the average user, but if you want full control, it's really an interesting feature for them to implement. The best antivirus is still the human brain and the application control makes it a bit easier to keep control of the running processes on your machine.
 

0 more replies
Relevance 45.1%

My system crashed earlier today and after getting it back up and running the touch screen function was not working.I tried F6, first, which activates or deactivates the touch screen. When it's off, I can only use the mouse pad, and when it's on, I can use nothing (no touchscreen or mouse....usually I can use both.)  I found the motion control button in the start bar and saw that it was disabled. I clicked "enable" and it now says, "Application Not Supported - Motion Control in Standby". I have searched the forum and haven't found any suggested fixes and I didn't see any applicable driver updates on the driver and download page.Does anyone have any ideas on how to solve this? I miss my touch screen! CarlyIdeaPad Yoga 13Windows 8.1

More replies
Relevance 45.1%

I am having trouble with my computer. A message pops up that Catalyst control center: host application has stopped working. And my PC will inform me when it is working. The problem is that it slows down my computer and even after I think I have solved it it goes back to not working. The problem has caused me to not being able to use the internet. Also on occasion, when attempting to restart or shut down it took a longer time (I did not wait for it to complete I then manually shut it down).
my specifications
DELL INSPIRON 15 R
windows 8.1
intel core i5
my driveris x64

Answer:Catalyst control centre host application has stopped worki

hello,and welcome to eightforums. first thing I would try is uninstalling catalyst control ,and reinstall latest version for you version of widows .
see site in link ,check the right hand side for link to latest catalyst control ,good luck
Download Drivers

1 more replies
Relevance 45.1%

Can anyone help with this? I have tried uninstalling and reinstalling everything I think is related but nothing seems to help. Here is the error message!

Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: ccc.exe
Problem Signature 02: 2.0.0.0
Problem Signature 03: 49ef8e09
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4e150719
Problem Signature 07: 20c8
Problem Signature 08: 143
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
 

Answer:Catylist Control Centre Host application stopped working!

We have no idea what you are working on. Post the exact system specs; ie make and model of mb, exact ram installed, exact pw supply, exact video card, etc, etc.
 

1 more replies
Relevance 45.1%

Hello,

Problem: When I right-click on my desktop and select "nvidia control panel", I get an error that says "nvidia control panel application, 4.4.730.0 has stopped working". The log file simply states the executable for this program crashed and gives no additional information.

I had been running the 296.10 driver on my machine with no problems. I upgraded the driver to 301.42. I had no problems for about a month and don't currently believe the driver version is related to the problem. The only change I made prior to this issue coming up, I installed Leisure Suit Larry which was speced for XP. The install may or may not be related, I can't think of how it would be.

Thus far, I've tried the below steps to resolve the issue with no luck:

-Installed 296.10 driver using "Clean Install" option.
-Installed 301.42 driver using "Clean Install" option.
-Uninstalled nvidia driver using Revo Uninstalled, then performed a "Clean" install, tried this with both 296 and 301 versions.
-Utilized Driver Cleaner Pro, followed by Revo Uninstaller to erase old GBU drivers and Physicx Drivers. Reinstalled 301.42. Restarted system. I was able to access the Nvidia Control Panel after the restart. I restarted a second time, and the same error this post is about occurred again. The error continues.

The only thing I can think of is to uninstall every single item marked 'nvidia', but I feel like that probably wouldn't... Read more

Answer:Solved: nvidia control panel application, 4.4.730.0 has stopped working

I found a guide, that when followed, corrected the problem I was having. http://www.evga.com/forums/tm.aspx?m=1174372&mpage=1

The key differences I noticed between what I was doing and what I should have been doing are as follows:

-Should have only been using default uninstaller application. Not Revo or driver sweeper.
-I should have been deleting every single item marked nvidia from my computer, except of course my mobo drivers and Raid management software.
-I needed to disable the function in windows that automatically downloads drivers from win update
-I should have let win7 load the default VGA driver, then restart without clicking a single other thing and finally installing the new driver from EVGA and then restarting again without touching anything else.

Read up the article if you have any more difficulties.
 

1 more replies
Relevance 45.1%

Hello, I keep receiving this message: "Catalyst Control Center: Host application has stopped working" everytime my computer is turned on and I have to click cancel and then click to close the program. I have ran Malwarebyes Anti-Malware, AVG scan and it came back with several infected files which I have removed. However the issue still remains... can someone please help me!!
 

Answer:Catalyst Control Center: Host application has stopped working

Have you tried uninstalling the video software and reinstalling it? It may very well be corrupt. Due to the virus or spyware you stated you had.
 

3 more replies
Relevance 45.1%

It can't have escaped people's attention that many programs opt to replace the conventional window title bar and borders with their own style. This makes the programs appear much more uniform across themselves; but ruins the flow of the rest of the UI- especially when using third-party msstyles. Is it at all possible to disable their ability to do this; forcing a Windows controlled titlebar and border on these programs. The sort of program I'm talking about is Windows Live Messenger (I think; I haven't used it for a long while), Spotify, Steam, Tune-Up Utilities, etc. I know it's probably more a matter of how these programs are written, but if it's possible to at least add a correct titlebar and border I'd love to know.

Cheers,
Dean

Answer:[SOLVED] Disable application's control over the title bar and window borders?

Hi themoodude,

Such applications are made to specifically have their own GUI. You will not be able to change it's appearance without changing its source code, which is going to be a problem. You could request to their support/development team to add it as an extra feature, other than that you can not change it.

3 more replies
Relevance 45.1%

This is the message I get every time I turn on my comp, (vista 64 bit), followed by the words "A problem has caused the program to stop working correctly."
Also, recently my graphics capabilities have been a lot weaker than they used to be, but I don't know if that is related to this
or just old drivers.
What can I do to fix this?
Thanks a lot guys.
 

Answer:Catalyst Control Center: Host application has stopped working

Any reason for using old drivers? Try updating them and see if the problem still occurs.
 

2 more replies
Relevance 45.1%

In windows 7, I keep getting a windows box that pops saying "Catalyst Control Centre: Host application has stopped working". In the body of the box it says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

It seaches for a solution but does not come back with one. Any ideas?
 

Answer:Catalyst Control Centre: Host application has stopped working

11 more replies
Relevance 45.1%

"Catalyst Control Center: Host application has stopped working
A problem caused the program to stop working correctly. Windows
will close the probem and notify you if a solution is available"
 

Answer:Catalyst control center: Host application has stopped working

The above message pops up twice and goes off. All the information saved on the desktop has vanished.
 

2 more replies
Relevance 45.1%

I am having trouble with my computer. A message pops up that Catalyst control center: host application has stopped working. And my PC will inform me when it is working. So I try to restart but it says that the host application is preventing the computer from restarting even though I know that it is not turned on. The problem is that it slows down my computer and even after I think I have solved it it goes back to not working. The problem has caused me to not being able to use the internet. Also on occasion, when attempting to restart or shut down it took longer than 10 hours (I did not wait for it to complete I then manually shut it down).
i have tried resetting it to a date where my computer functioned fine several times but it only solves the problem for a short period.
my specifications
Hp envy m6
windows 8.1
intel core i5
amd Radeon HD
my driver is a acpi x64

Answer:Catalyst control center: host application has stopped work

I suggest you find exact model of that "amd Radeon HD" And download last version of driver for that particular GPU. Download Drivers that uninstall old driver (it will offer it when starting driver installation) and install it.

4 more replies
Relevance 45.1%

This is the message I get every time I turn on my comp, (vista 64 bit), followed by the words "A problem has caused the program to stop working correctly."
Also, recently my graphics capabilities have been a lot weaker than they used to be, but I don't know if that is related to this
or just old drivers.
Thanks a lot guys.
 

More replies
Relevance 45.1%

I just purchased two HIS HD 5670 video cards and installed the hardware and drivers with no problems. Where I am getting a problem is with the Catalyst Control Center. It will not open. Every time I try to open it, I immediately get a windows error which says Catalyst Control Centre: Host has stopped working. I've tried uninstalling every piece of ATI software on my computer, re-installing, different versions of the software, etc. Nothing fixes this issue. My graphics work just fine, but I cannot get in to change the settings or turn on Crossfire. It is very frustrating and I have tried everything I can think of short of re-installing windows. I'd prefer not to do that. Here is the info from the error message. Can anyone help?
Description:
Stopped working

Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: ccc.exe
Problem Signature 02: 2.0.0.0
Problem Signature 03: 49ef8e09
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4bf4c227
Problem Signature 07: 20c7
Problem Signature 08: 143
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Read our privacy statement:
http://go.microsoft....63&clcid=0x0409

Here is what I'm running on my machine:
Intel Core 2 Quad Processor
4 GB RAM
2x HIS HD 5670 w/ IceQ
650W PSU
Windows Vista Basic 64-bit

I've tried CCC versions 10.11, 10.10, 10.9, and 10.1. All have the same result.

Here are the details from the eve... Read more

More replies
Relevance 44.69%

I've been getting this nagging message whenever I boot windows.  Tried uninstalling and re-installing the driver and ATI software from Lenovo's site but the problem persists.  I can produce the message at anytime by running "ATI Restart Runtime".  Someone please tell me how to fix this, it's really annoying.

More replies
Relevance 44.69%

When installing applications they appear to install correctly. An icon is created on the desktop and I can access the program.

In control panel under programs and features... the application is not showing up. I cannot uninstall the programs, because they aren't showing in programs and features to uninstall.

Yes, workarounds can be used to delete the program, but there is something wrong. The programs are not installing properly.

I ran sfc/ scannow as admin no problems indicated
After a couple hours messing with this:

Thought I should add this... When I right click on the installer/setup exe file and select to run as administrator the installer works and does show up in programs and features... Also, I can delete the program as well from programs and features.

I have never had to do this before even though I am admin...(in name mostly) unless I am willing to allow more vulnerability to my system by turning on all the time. Still having to run as admin does seem a bit much for installing programs. The worst part...the installer will run, installs the program, yet leaves off the ability to uninstall or change in the programs and features page of control panel

Answer:application installed doesn't show control panel - programs & features

Have a look at this MS website & see if there is anything there to help you. There are some links you can follow & there is a "fixit" there as well in one of those links.
Injudicious & over use of registry cleaners is one of the causes.

My Control Panel Doesn&#39;t Show All Of My Installed Progams - Microsoft Community

8 more replies
Relevance 44.69%

cannot repair or restore control for discrete video card.  only onboard controls are available.  problem started when installing HP update utility for printer, can anyone tell me how to repair or reinstall Catalyst  control center?

Answer:Catalyst Control Centre: Host application has encountered a problem and needs to close.

Has anyone else resolved this?  I have the same problem on a T60p laptop.  Have updated the ATI software and still no luck.

1 more replies
Relevance 44.28%

I don't know the difference between an Application and a Program. Thought the Geektionary would help, but didn't find anything there.

I have 2 Dell Windows XP computers.

If I want to copy something such as Microsoft Money from one pc and install it on the other, what exactly do I need to copy? The application or the program?

And where do I find what I need to copy? :confused

Any help in this area is so appreciated.

Thanks.
 

Answer:Application vs. Program

Well basically an Application is an executable file such as Notepad.exe whereas a program can contain more than one application along with numerous other files such as DLL files.

Since the days when Windows had a registry it is far more difficult just to copy a program as it often has numerous entries in the registry which will point to locations of files within the program - this is why prgrams these days are generally installed. Only if the program contains a small number of files or is a self contained executable (such as Notepad which is both a program and an application rolleyes) can a program be copied.

Hope that's all clear. :confusedrolleyes
 

4 more replies
Relevance 44.28%

Hi. I have a Satellite P200D-128 and I've been getting a pop-up screen with an error message saying, "Catalyst Control Centre host application stopped working." I'm sure I haven't altered anything.

I tried downloading new drivers from http://support.amd.com/us/gpudownload/Pages/index.aspx but the download wouldn't work.

Please could you help?

Thanks.

Answer:Satellite P200D - Catalyst Control Centre host application stopped working

Which operating system do you use?
Have you tried to reinstall display driver offered on Toshiba support page?

By the way: I own the same model and use it with Win7 32bit. It works perfectly and I?m happy with the performance.

11 more replies
Relevance 44.28%

I have been noticing there is a program that crashes on my HP Pavillion dv6 laptop. I know that this is usually not an issue unless you are looking into overclocking your GPU. But I honestly find it annoying that it crashes. I don't want to prevent it from opening on start-up. I just want to fix the issue all-together. Today, I updated my Graphics Drivers but I don't know if it installed the new version of CCC by default. Could someone please help me. If I just need to update my CCC, could someone link me the address for the download (I am runnning Windows 7 64-bit with the ATI Mobility Radeon HD 4200 Series) I am only asking for you guys to find this if it is the actual issue. And because I couldn't find the proper download link for the CCC update.

More replies
Relevance 43.87%

Trying to use a map making program for a video game. Worked fine for the past week, for whatever reason it suddenly won't show up in applications anymore.

I can load it and it seems to load fine (if I load another version and connect to the game server it gives me an error saying, "Client already connected").

When I look into Task Manager it is listed under processes, but not applications.

Please help.
TY!

Answer:Program in processes but not application.

Quote:




I can load it and it seems to load fine




Go to Task Manager, end the process. Scroll through the list and make sure there are no other process started associated with the program.
Start the program, it should start and run now.

7 more replies
Relevance 43.87%

Can any body help i have downloaded 2 files and each time i try to open them i get the message saying this is not a win 32 application.I have tried windows98se and xphome can any body advise how i can open these files or are they now rubbish downloads.

Answer:This program is nort a win 32 application

They may have become corruped during download; is there an alternative download site?

1 more replies
Relevance 43.87%

Welps I'm starting school Monday and I need a good calender program to use on my laptop that's easy to learn and simple to use...Any ideas? Thanks in advance

Answer:Calender Program/application

You can find a couple of suggestions or members made here, in the second post, under the Office Applications heading:Freeware Replacements For Common Commercial AppsRainlendar & Sunbird

6 more replies
Relevance 43.87%

Hello can anyone please tell is there any back up software that can back up a particular application for me? For example, if there is any update for a software and i want to back up the software before updating it, is there any way to do so? I know i can back up the whole computer using Norton Ghost but what if i just want to back up a particular software?

Answer:Backup program for a particular application

Not generally doable. When programs are installed, they make changes in the registry of the computer and in various parts of the Windows operating system. Simply finding a program that will copy over the files, will not copy the registry changes or any other changes..it simply copies files. That is why people who try this run into problems. To date I know of no program that copies applications into a useful format to save. There are migration programs and imaging software etc, but nothing for single applications to my knowledge.

4 more replies
Relevance 43.87%

i have recently noticed a problem when i download and install new programs. for example i downloaded and installed ashampoo burning studio and everything worked fine but when i restared the pc and tried to open it i got a message which read "the item has been changed or moved etc.. do you wish to delete this shortcut"

i thought that might just be a problem with the shortcut which suddenly displayed a generic icon but even the .exe file in the folder had the same issue.

this has happened every time i install this program and others as well which i have tested.

help would be greatly appreciated. thank you!

Answer:help! with program application problem

Does the program still work as intended?

6 more replies
Relevance 43.87%

I'm trying to execute an application (simulator) using a system call from my program. Once the application (simulator) starts, I want my program to perform certain tasks on the GUI of the simulator: fill in certain fields, start the simulation, collect the results, and close the application. In essence, I need to emulate the keyboard stokes on the GUI of the simulator using my C program. I must interface to the GUI since I only have the executable available to me. Can any one recommend a way to perform this? Any help would be greatly appreciated.
 

Answer:How to interface an application's GUI with a C program

Ive never done it, but I'd recommend looking into sockets, you can send data between a host program and server program and such.
 

1 more replies
Relevance 43.87%

Anyone using this HOT rated download, and will it have a direct or indirect benefit regarding popup or popunder ads? The screen shot looks pretty impressive. I'm already employing CCleaner for the drive.
 

Answer:CleanCache application/program

This is more of a question for the Software Forum.

Using this or CCleaner is not necesarily going to stop popups? It is not a popup stopper? It's a drive cleaner which will remove some items that could possibly be related to some problems you are having.
 

1 more replies
Relevance 43.87%

i need a good program (with out payin 4 it plz) that can deleted application and its ext... when i hit ctrl alt delete i see it in use and when i end it process.. it pops back up... and i cant delete it...

the `application that i cant delete nor get rid of is nbjdb and wrrybq. those are application.. thank you.. plz any thing would help...
 

Answer:need an program that can delete application and its ext.

Hi

You most likely have malware on your PC judging by those file names, so running the below and attaching the logs requesed will be a start, then if the files are still their further removal instructions will be posted to aid you in removing any malware files including those two mentioned.


Please follow our standard cleaning procedures which are necessary for us to provide you support. Also there are steps included for installing, running, and posting HijackThis logs as attachments.

Run ALL the steps in this Sticky thread READ & RUN ME FIRST Before Asking for Support
Make sure you check version numbers and get all updates.
Very Important: Make sure you tell us the results from running the tutorial...was anything found? Were you unable to complete any of the scans?...Were you unable to download any of the tools?...Did you do the on-line scans as suggested? etc.

After doing ALL of the above you still have a problem make sure you have booted to normal mode and run the steps in the below link to properly use HijackThis and attach a log:
Downloading, Installing, and Running HijackThis

Make sure you also rename HijackThis.exe as suggested in the procedures. Use analyse.exe for the new name. This is very important due to some new infections going around.





When you return to make your next post, make sure you attach the following logs and that you have run these scans in the following order too:
CounterSpy
AVG Antispyware log - ONLY IF NEEDED y... Read more

1 more replies
Relevance 43.87%

What is the worst legit program/application you've ever used in Windows? Exclude mention of antivirus and anti malware because there's already a popular thread about it on MT.

To moderators, please move this thread if I've posted it in the wrong place.
 

Answer:Worst program/application you've ever used

Backup software, it made me loose all backups, twice. First one "only" corrupted all files.

But the worst was the one from Google. I removed online files and upon sync, it removed local files. I had to redo everything.

I have sworn never to use any automatic backup software ever again, manual backups for me, only copy/paste locally or online.
 

7 more replies
Relevance 43.87%

On startup and whenever i attempt to open Catalyst Control Centre, Windows displays the error "Catalyst Control Centre: Host application has stopped working".

Is anyone else having similar troubles.
I tried reinstalling the drivers off the toshiba site, and installing the new drivers on the ATI site and everything I could think of. Since the either drivers aren't working im not able to go above the 1024x768 resolution.

Any suggestions ?

Answer:Satellite A300 Catalyst Control Centre issue - Host application has stopped working

Hi

I googled for this error message and found many people having this issue.
It?s not related to the notebook but to the driver?
Who knows why?.

Anyway, in most cases the people solved this by new driver Catalyst installation.
You should do this;

- update your Vista to the latest state
- remove the old Catalyst from the system
- remove/uninstall the graphic card driver from the device manager
- reboot the notebook and install the Catalyst and driver again

Should run!

2 more replies
Relevance 43.46%
Question: Program control

Hi, is there any way to have one program open when another one opens. and vice versa when the first one closes.here is the expected results1.download torrent from "*".com2.utorrent opens 3.protowall opens because utorrent opened4.the torrent is finished downloading. utorrent closes5.protowall closes becasue utorrent closedthis might help, utorrent has a function to execute any file when the torrent is done. so i was thinking a killprocess command batch is kill process the same as hitting the x? if it is what i think it is, it would send utorrent into an error

More replies
Relevance 43.46%
Question: program control

is there any way to have a program open when another program opens? and vice versa when it closes.

the situation is i want my ipblocker (protowall) to open when i open utorrent. and i want protowall to close when i close utorrent.

any help would be appricated.

and on a completly unrelated note does anyone have the zip file from this website​iphone skin
​rapidshare says "this file has been deleted"​
thanks
 

Answer:program control

Would launching and killing both at the same time suffice?

I ask because:

1. It is easier to implement
2. It is less resource-intensive than constantly monitoring for a process

Let us know!
 

4 more replies
Relevance 43.46%

Is there any way to have vista NOT ask for permission on a certain program? Namely atitool, which I want to run on boot, but it asks every time whether I want to start it or not.

yes.. I know I can disable UAC altogether.. I just want to disable it for this one program.
 

Answer:UAC control per program

Try setting the program to run through Task Scheduler, at User Logon, and check the "Run with highest privileges" box. I had the same problem with EVEREST Ultimate, and that solved it for me.
 

9 more replies
Relevance 43.46%

Hey guys, I realize that I am not the only person that has encountered this problem, as my research has shown. I tried to ready some similar posts and problems on this forum and others, but I seem to get stuck at certain steps. Here is my situation. Im on a Dell latitude d630 running windows vista. I fell asleep watching Dexter online and when I woke up there was a new looking Anti-Virus program on my task bar that i do not remember installing. The program showed hundreds of infections and was prompting me to delete only if i bought their antivirus. After realizing I could not delete these infections i tried to close the program and open my Malwarebytes Anti Malware and also Synamatec Antivirus. Both programs failed to open, and an error message bubbled off of the "Antivirus" icon. As soon as this happened I tried harder to download new antivirus and to get this off my comp. But no matter what I download, I am unable to install/open. I cannot open task manager, and recently new virus alerts have been popping up. One says i have an infiltration alert about trojans and password stealing attacks, and when I press stay unprotected www.*censored*.com pops up. I tried to fix this going off what you said to others, but I would appreciate a little one on one help to walk me through this, as each case may be different entirely. Thanks a lot!

Answer:Application could not be executed, program is infected. Please Help

Hello and welcome to Computer Hope Forum. My name is Dave. I will be helping you out with your particular problem on your computer. 1. I will be working on your Malware issues. This may or may not solve other issues you have with your machine.2. The fixes are specific to your problem and should only be used for this issue on this machine.3. If you don't know or understand something, please don't hesitate to ask.4. Please DO NOT run any other tools or scans while I am helping you.5. It is important that you reply to this thread. Do not start a new topic.6. Your security programs may give warnings for some of the tools I will ask you to use. Be assured, any links I give are safe.7. Absence of symptoms does not mean that everything is clear.If you can't access the internet with your infected computer you will have to download and transfer any programs to the computer you're using now and transfer them to the infected computer with a CD-RW or a USB storage device. I prefer a CD because a storage device can get infected. If you use a storage device hold the shift key down while inserting the USB storage device for about 10 secs. You will also have to transfer the logs you receive back to the good computer using the same method until we can get the computer back on-line.Please download and run the below tool named Rkill (courtesy of BleepingComputer.com) which may help allow other programs to run.Save Rkill to your desktop.There are 4 different versions. If one ... Read more

1 more replies
Relevance 43.46%

hi there. i need to fill application form via internet.they send me this form on my email. i tried to open it on Window 8 but it changed the text and basically my application for look like big mess. i need type my details and i m not able to do it either in right places... Help please :(

Answer:which program i should use to fill an application form?

how to fill in a pdf application formhttp://is.gd/On6OrRhttp://www.ghacks.net/2011/03/10/ho...http://www.ehow.com/how_5122749_fil...http://helpx.adobe.com/x-productkb/...

3 more replies
Relevance 43.46%

when I try to open Mozilla fire fox the below said message pops up and only when I click OK the mozilla window opens. what is the problem here ?'"The application or DLL C:\Program Files\Java\jre6\bin\MSVCR71.dill is not a valid windows image. Please check this against your installation diskette."

Answer:the application or DLL C:\Program Files\Java\

Go to Control Panel, double click on Java. Click on Update & click on > Update now.If you still having problems, uninstall Firefox completely ( including the Profile ) & reinstall again.http://kb.mozillazine.org/Uninstall...

3 more replies
Relevance 43.46%

Hey guys, I get this error after I close any program ie. Interent Explorer, Winamp, Messenger, Soulseek etc.

I have run adware scans, and nothing. Help would be appreciated. Its annoying hitting OK everytime I close a program...

Answer:Application Error after I close any program?

Well I get the exact same error for IE, Msn, Winamp, everything. The number just changes around a bit. I know for sure this is some kind of virus/adware, but havent been able to find a tool that fixes it.

5 more replies
Relevance 43.46%

Every web site I try to navigate through freezes within 10-20 seconds and shows an end program message. Sometimes I even get this message when I try to shut down. I cannot even write this from my own computer as the web site blocks! Event Viewer shows long lists of Application Hang errors, none for Internet Explorer. I?m using IE 7, Windows XP Professional,2002, Service pack 2.

Answer:application hang end program error

Ok first im gunna need to check how much RAM you have left avaliable do this by:
1. Go to Start and click Run
2. Type "dxdiag" and click OK
3. Click the Save ALL Information
4. On this forum you'll need to upload the file as a attachment. The file will probably be saved to your desktop and will be named "DxDiag.txt".

14 more replies