Computer Support Forum

Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

Question: Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

Been trying to update XP SP2 with the .NET Framework security update V1.1 SP1 (KB886903), but every time I try I receive the following error:

==============
Unable to load JIT compiler (MSCORJIT.DLL). File may be missing or corrupt. Please check your setup or rerun setup!

Error Code: 0xC0000005
Try to install the update again, or request help from one of the following resources.
==============

The only fairly helpful resource I've found tells me that the "Unable to load JIT compiler" error is caused by a timeout error on a system with a heavy load. I've had this error numerous times and checked my system load and it's never been high at all.

Any suggestions would be appreciated.

-z

Relevance 100%
Preferred Solution: Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

reduce the load on the machine by closing applications before re-running setup.

3 more replies
Relevance 92.8%

file missing or corrupt check or rerun set up

How do I do this?

More replies
Relevance 92.8%

I am getting "unable to load jit compiler: mscorjit.dll " when I restart my machine. Please tell me how to solve this prob n why is it coming

More replies
Relevance 91.93%

Obviously a common .Net Framework problem, usually fixed by re=installing 3.5 and 4.5 Nets. I am on a clean install of Windows 8, only been using it a few hours. To try and fix the problem I disabled both 3.5 and 4.5 using the control panel, restarted cleaned the registry with CCleaner, restarted, and then re-enabled both. I am still getting the:

"Unable to load Jit Compiler: (mscorjit.dll): file may be missing or corrupt. Please check or rerun setup."

I ran a sfc /scannow but it didn't find any errors. I'm at a loss what to do. There are a couple mscorjit.dll files within the .NET windows folder.

Any ideas? Google didn't help besides what I have already tried. Also if this belongs in the BSOD area just move it (though I don't get a BSOD error, but its the only subforum that deals with errors that I could find).

More replies
Relevance 90.77%

I keep on receiving the error "Unable to load Jit compiler:(mscorjit.dll) file may be corrupt. Please run check or rerun setup."

I've been told that this can be safely ignored... But I believe it's causing conflict and other problems with other programs that I've been trying to install... So can anyone explain is a dumbed-down version of how to fix this error?

Also: My AlienFX has ceased to work. I'm not sure what is wrong with it, but this error persists as same thing. I don't remember what the header is on the first one. But for this one it's AlienFX Controller or something or other.

Thanks very much everyone.
-Dustin Yates.

More replies
Relevance 93.07%

Hi.
recently i uninstalled itunes in order to revert back to itunes 10 from itunes 11. And that same day. i started getting the error that my jit compiler is not working properly and a couple of my programs now cannot run.
im at a loss. Ive tried reparing Microsoft NET with no luck. also tried system restore to a couple days before. also no luck. Went to the website and downloaded the latest version of Microsoft NET 4.5 also didnt work.
Im in finals week right now and its really stressing me out. Any help would be very greatly appreciated.
Also i read somewhere that this might have to do with my ATI graphics card. i have Radeon HD 5650. but the driver said that the driver on their site cannot be used with sony VAIO, which is what i have.
Thank you very much for any help.
 

More replies
Relevance 93.07%

Hi.
recently i uninstalled itunes in order to revert back to itunes 10 from itunes 11. And that same day. i started getting the error that my jit compiler is not working properly and a couple of my programs now cannot run.
im at a loss. Ive tried reparing Microsoft NET with no luck. also tried system restore to a couple days before. also no luck. Went to the website and downloaded the latest version of Microsoft NET 4.5 also didnt work.
Im in finals week right now and its really stressing me out. Any help would be very greatly appreciated.
Also i read somewhere that this might have to do with my ATI graphics card. i have Radeon HD 5650. but the driver said that the driver on their site cannot be used with sony VAIO, which is what i have.
Thank you very much for any help.
 

Answer:Jit Compiler error (mscorjit.dll error)

Laptops can be difficult sometimes, but This is an interesting possibility- read it all and with luck the links he gives will get you a driver.
http://www.hardwareheaven.com/mobil...-drivers-notebook-computers-13-12-2011-a.html
Good luck
 

2 more replies
Relevance 81.59%

Every time I try to open or run a program on my computer it says "Unable to load jit compilermscorjit.dll): file may be missing or corrupt.Plese check or rerun setup." This has been going on for a very long time now and it starting to really annoy me, i need some programs for school but i cant use them. What can i do to fix this? I have Windows Vista Home premium.
 

More replies
Relevance 65.6%

When I try and install the update for my video driver and the latest Windows update (Windows Genuine Advantage Validation Tool (KB892130), I get an error message saying: "Windows could not load installer for display. Contact your hardware vendor for assistance".

Also (and I don't know if this is related or not, I am unable to view "properties" from my desktop or to change screensaver/background themes from the control panel).

From googling the error message, I suspect that it has something to do with my video driver but I'm not certain.

I'm not sure what specs you need re: my computer. Here are the basics, if you need more, let me know.

Dimension 2400

Intel(R) Pentium(R) 4 CPU 2.66GHz
Version: x86 Family 15 Model 2 Stepping 9
Speed: 2657 MHz

Microsoft Windows XP Home Edition
Version: 5.1.2600
Service Pack: 2.0
Location: C:\WINDOWS
PID: 55277-OEM-0011903-00102
Hot Fix: KB943460

Video Cared
Model: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Driver: ialmnt5.sys
Tuesday, April 15, 2003
Supported

Sound Card
Manufacturer: Analog Devices, Inc.
Model: SoundMAX Integrated Digital Audio
Driver: smwdm.sys
Friday, February 28, 2003
Supported

Any suggestions or instructions for correcting the problem would be greatly appreciated.

Thanks,

Charles
 

More replies
Relevance 64.78%

Hi all,

I've recently installed a Compiler IDE(I want avoid telling IDE name becouse my question is not related on it) and it worked well. But after installing SP1 and SP2 package of this Complier IDE it crash after creating a new project or opening a project. I've uninstalled this IDE and reinstalled it without any additional SP packs likes in the first installation but now it crashes in the same point like happened with SP packages.

Here what's happend:

Installed Complier IDE
Working
Installed Complier IDE SP1
Installed Complier IDE SP2
Stopped working and crash

Uninstalled Installed Complier IDE SP1
Installed Complier IDE (without SP1 and SP2 Complier IDE's)
Stopped working and crash

I suppose that Complier IDE's SP1 and SP2 changed something in Windows System that cause this error.

My question is, how can I restore Windows Setting/Registers/Files to be able to run again this software?(excluding format)

What've tryed:

Uninstall Compiler IDE
Delete all folders of Compiler IDE in:
- C
- C:/Programs
- C:/User/*User Name*/AppData/ (Local, LocalLow, Roaming)
- C:/User/*User Name*/Documents
Running CCleaner
Manually remove all registers with Compliler IDE's name from RegEdit

I wanted to try also Image System restore but my oldest Image System is when program doesn't work.

Any suggest?

I also wanted to try a Virtual Machine to avid format PC but it'll slow system, any alternatives?

Answer:Compiler IDE crash after update, how to clean windows

Try uninstalling it with something more powerful like Revo uninstaller.

Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Select Advanced Option > Select All and Delete All (both scans)

This will help find any leftover files from the installation.

6 more replies
Relevance 64.37%

Attempting to load system update 5.0.5-02-14 however, when I load the install shield, the wizard fails to complete the load with the following error: "The wizard was interrupted before Lenovo System Update could be completely installed.  Your system has not been modified." I've tried closing all background processes without success.  Appreciate any guidance......

Answer:T500 w/ Windows 7 - Unable to load System Update 5.0.5-02-2014

I have this issue too.  Did you ever figure out a solution?

1 more replies
Relevance 62.32%

I get a code 2 error message in Windows ME when I tried to use my digital camera in a USB port--NTKERN.VXD unable to load the driver, Code 2. Can anybody help me figure out how to extract the correct drivers? Thanks
 

Answer:Code 2 error in Windows ME, unable to load driver

Are you fully upto date with Windows ME updates?

If you had a Driver CD that came with the Camera did you install the drivers supplied?

If you goto Device Manager ( located in Control Panel > System ) are their any yellow ! marks by anything?

If you built the PC yourself do you know if the Chipset/Motherboard drivers have been installed? This is where some system specs will come in handy if you can post them, CPU, Motherboard name and version, if its a per-build eg DELL, HP etc then what model and version is it?

What Camera do you have?
 

5 more replies
Relevance 62.32%

hi all i have a really serious and baffleing problem. when i boot windows and get to the login screen i get a message saying "a problem is preventing windows from accurately checking the license for this computer. Error code: 0x80070002" i have had xp service pack 2 for a month or two now and not sure why it is doing this all of a sudden
common sense says to go to google and type in the error which i did and came up with this page describing my exact problem http://support.microsoft.com/?kbid=310794.

this page is great except for the fact i do not have the registry entries described in the workaround. they just arent there. also my drive letters have not changed so it rules out the fix provided by microsoft. this is VERY annoying and i know you folks are knowledgeable and hope you can help me out. thanks

trevor
 

Answer:error at login screen unable to load windows

8 more replies
Relevance 61.91%

included frst txt. Computer ran fine moved and sat unplugged for two weeks now wont load into windows repair cannot fix and recovery brings error listed in title. tried basic troubleshooting made sure hardware was seated nothing unplugged think its a registry problem virus etc. I have two computers that I have built that went down at the same time both with the same exact parts except the case. other computer has different symptoms though it freezes in windows and bios everything is seated correctly and tried diff sticks of ram etc. nothing working though and need help with that one also I don't know if there was some sort of virus that infected my computers or what because I didn't have them networked. just really weird. please fill me in on the issues that are causing this so I may learn from them. any help would be greatly appreciated. if you can call me to make things easier plse jst ask for my number and will do. thnk you ahead of time for any help im stumped at this point and cant get anywhere without dedicating a boat load of time to research and etc. thnk u thnk u thnk u
 FRST.txt   11.44KB
  8 downloads also when frst ran it said no disk in drive \device\harddrive4\dr4

Answer:unable to load windows recovery error 0x800700b7 reg prob.

 
Download the enclosed file. 
 fixlist.txt   716bytes
  10 downloads
 
Save it in the same location FRST is saved.
 
Run FRST, except that this time around click on the Fix button and wait.
 
The tool will make a log in the same location FRST is saved (Fixlog.txt), Please post it to your reply.
 
Restart in normal mode and let me know the outcome.
 

32 more replies
Relevance 61.5%

Operating System:       Windows Vista Home Premium
Computer:                     Compaq Presario SR5079UK                                          2 gb RAM
Problem:  "Windows Update; Error Code 8000FFFF"   "Unable to uninstall update KB929777"
Solutions Tried:
Disable all Antivirus softwareTry running windows updates, and receive the error message "Error Code 8000FFFF"I have been advised to uninstall update KB929777, when trying to do this I receive a further error"An error occurred, not all of the updates were successfully uninstalled"
I have also tried the above whilst running Windows in safe mode and the same errors are received.
Also tried the following:
Disable all Antivirus softwareAt command prompt; Net Stop WuAuServRename "C:\Windows\SoftwareDistribution"     to     "C:\Windows\sdold"Try installing download update "KB929777" - Unable to installAt command prompt; Net Start WuAuServTry running windows updates and, still receive the "Error Code 8000FFFF"
I have also tried the above in safe mode, however the service "WuAuServ" does not run in safe mode,tried installing the update "KB929777" and receive the error "Installer encountered an error: Ox8007043c. This service cannot be stared in Safe Mode"
I have also tried the following:Removing 1gb of RAM, Re-installing a previous ... Read more

More replies
Relevance 61.5%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

Answer:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

9 more replies
Relevance 61.5%

Our users have IE 7 and 8. We keep them locked into place by pointing IE to our firewall product (tools > internet options > connections > lan settings), so that only approved sites are the ones that our people can access.In the last few days, several of them report issues with specific websites loading very slowly - load times of over an hour just to get the log-in screen to appear.Troubleshooting Steps:1.) Unchecked the "use proxy server for your LAN" under the IE menus---> Site resolves instantly, as it should---> This pointed me to the direction that perhaps the site wasn't configured for our firewall2.) Re-checked the "use proxy server" box, and specifically configured the site in our firewall---> Site continues to resolve slowly, with the same load times as before performing step 1That would normally indicate that the problem is on the vendor's end. Something may be wrong with their site. And that's the line of thought I was pursuing until I was reported back to that the users are having the same problem on other websites. These new websites they're having problems with are, and have been for a long time, configured properly in the firewall.I'm not sure what my next step is to pursue. What am I looking for now? I don't know enough about networking to figure out where to track next.

Answer:Users are unable to load websites - no error, just 1-hour+ load times for pages

Bump.

3 more replies
Relevance 61.09%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 60.68%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Answer:Can not load windows , update error to 8.1

Reboot then follow this guide. To get to the troubleshoot RE. How to use the Windows 8 System Recovery Environment Command Prompt In command prompt type in then hit enter.


Code:
rstrui.exe
Select a restore point to before you tried updating Windows 8 to 8.1.

1 more replies
Relevance 60.68%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.
 
I tried those commands from windows site
 
bootrec /fixmbr and other bootrec
 
and in config, 
 
ren system syste.001 this worked but
 
ren software software.001
 
this gave errorprocess in use, can not be accessed.
 
How can i rescue? I dont have any rescue disc or etc.
 
Desktop computer, 32 bit probably.

Answer:Can not load windows , update error to 8.1

Is the Windows 8.1 disc 64 bit version?  Either bad disc, or wrong version for what you have, and what he burnt to the disc.  I have run into where I have had to turn off Secure boot in the UEFI bios.  It helps to know what the manufacturer & model# of your computer that you have.

5 more replies
Relevance 60.68%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Answer:Can not load windows, update error to 8.1

What's the error he's receiving on boot?

5 more replies
Relevance 59.86%

Hi, about two months ago my computer started doing some weird stuff where multiple programs didn't work.

Some programs, such as notepad, give an error of C:\Windows\systems32\WINSPOOL.DRV is either not designed to run on Windows or it contains an error. I have no idea what is causing this, and found out when looking at its permissions, all were switched to a TrustedInstaller, while I had only read/execute perms.

Also, when I tried to restore my computer to an earlier version, all of my restore points were gone. When I tried to backup my files, an error came up stating, "Server execution failed (0x80080005)".

Lastly, I am unable to set my computer to update windows. When I go to the action center and click Install Updates Automatically, the window closes and nothing changes.

My current OS is Windows 7 (which was upgraded from Windows Vista), and it is an HP laptop. Also, any automatic updates HP software usually installs, doesn't seem to be working.

I have no idea why all of this is happening, and I greatly appreciate any help.
 

More replies
Relevance 58.63%

Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.


Any suggestions?

Sam
 

Answer:fail to load sortbls.nlp error after Windows Update froze

Use System Restore to revert back to a date before any updates may have been applied.
 

2 more replies
Relevance 58.63%

My windows update indicates that some files are missing.  I select reinstall and I get this error.  How do I correct this? -sp

Answer:X60s Windows update will not load Error number: 0x8024D007

Welcome to Lenovo's forums!   First, please check in c:\windows\system32\ and look for a file named WindowsUpdate.log right after you run Windows Update.  Scroll down to the bottom and see what the specific error is.   I have cleared odd Windows Update problems by doing the following:1:  rename c:\windows\system32\softwaredistribution to something else2.  delete c:\windows\system32\WindowsUpdate.log or move it somewhere else. Let us know what happens after you try this and what the specific error is.   

1 more replies
Relevance 57.81%

Hello,

I am working on a friends laptop and I am running into a wall. I am hoping someone here could possibly help me. To begin this is an HP Pavilion dv6 laptop running Windows 7 Home Premium 64Bit. The issue I am having is that I cannot run Windows Update no matter what I try. Initially I was receiving error 80004005 when running Install Update, but after SURT the error changed to 80073712. Both errors directed me to the same solutions and nothing seems to work.

I had been looking for answers and found these forums which directed me to Windows Update Posting Instructions. I went through all the steps and am still experiencing the same error 80073712 when attempting Windows Update.

Log and Screen Shot

Thank you to anyone willing to help because I am just flat out lost. =)

Don

More replies
Relevance 57.81%

unable to update windows 7 pro error 80244004

i keep getting error 80244004. (
0x80244004 WU_E_PT_SOAPCLIENT_CONNECT Same as SOAPCLIENT_CONNECT_ERROR - SOAP client failed) i only had one antivirus, microsoft security essentials (4)

-tried the .net 4 uninstall / no change
-updated time
-replaced gte certs
-disabled win firewall and security essentials
-allow all *microsoft.com, *windowsupdates.microsoft.com in internet options
-no proxy
-active x filter is off on router
-changed dns server to googles
-ran the fixit, and manually as well
-ran the rediness tool (no errors in checkSUR.log
-chdisk, no issues
-sfc, no issues

thanks
pj

EDIT: i reinstalled MSE, and when i did, it downloaded the latest database. (which i was never able to do).. but sure enough, once it finished, i tried to manually hit the UPDATE button, and i get the same error as i do with windows update, x80224004

--
my log
--


Code:
########### AU: Uninitializing Automatic Updates ###########
2013-04-13 18:57:38:531 1052 d1c Report CWERReporter finishing event handling. (00000000)
2013-04-13 18:57:38:624 1052 d1c Service *********
2013-04-13 18:57:38:624 1052 d1c Service ** END ** Service: Service exit [Exit code = 0x240001]
2013-04-13 18:57:38:624 1052 d1c Service *************
2013-04-13 18:59:50:272 1040 cc Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0500)... Read more

Answer:unable to update windows 7 pro error x80244004

Windows Update Posting Instructions

9 more replies
Relevance 57.4%

This happened quickly. First thing I noticed was during a Windows Update. I had recently reformatted my hard drives and had a LOT of programs to download and install. It went well until the end when it refused to install three security updates and another update ( not sure which). Microsoft was stepping me through things - running "FixIt" and the Microsoft WIndows Readiness Tool. This had no effect.
I also ran system file checker. NOthing has worked. On the contrary, things appear to have gotten worse. WHen I would try to log onto ebay, or most any secure website I would get an error message - something to do with SSL. I tried it with Internet Exlorer ( I was using Mozilla Firefoxat first). Using explorer I was allowed to enter secure sites but other things stopped working.
None of the links in Outlook emails work anymore - I get a "general failure message".

I've ran with Norton, Microsoft Essentials, Malware Bytes Anti malwarem - all came back clean.

Can you help like you did before with a problem I had a year or so ago!?!?


Thanks in advance - you're the best.

fphaseiv

Answer:Unable to download WIndows Update and getting SSL error message

If you have Norton Internet Security or N360 - remove it.

http://jcgriff2.com/NRT_N360_Removal.html

Try Windows Updates again - www.update.microsoft.com

Regards. . .

jcgriff2

`

4 more replies
Relevance 57.4%

Hello,

I am stumped as to why my Windows 7 Professional X64 system will no longer accept updates.

When I try to run updates via Microsoft updater I get the 800b0109 code.

When I try to run the WIndows 7 SP1RC1 I get:
"A certificate chain processed, but terminated in a toor certificate which is not trusted by the trust provider."

When I try to run the Windows Readiness Tool I get:
"Installed encountered an error: 0x800b0101. A certificate chain processed, but terminated in a toor certificate which is not trusted by the trust provider."

I have ran Malwarebytes from safe mode but it comes up clean.

Here is the HiJack this log:
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:19:06 PM, on 1/12/2011
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16671)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files (x86)\Intel\Intel® Rapid Storage Technology\IAStorIcon.exe
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\acrotray.exe
C:\Program Files (x86)\Sony\ISB Utility\ISBMgr.exe
C:\Program Files (x86)\Sony\PMB\PMBVolumeWatcher.exe
C:\Program Files (x86)\Absolute Software\LoJack for Laptops Notifier 2\LoJackNotifier.exe
C:\Program Files (x86)\Sony\SmartWi Connection Utility\CCP.exe
C:\Program... Read more

Answer:Unable to run Windows 7 Update,Error code - 800b0109

Hello and welcome to Bleeping Computer We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review your topic an do their best to resolve your issues.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for postin... Read more

2 more replies
Relevance 57.4%

Hi,
I'm unable to use windows update. I keep getting error 80073212 regardless of what I try. Please see Grrr.txt for all troubleshooting done on this topic.
Thank you for any help!

Answer:Windows Update error 80073712, Unable to repair

I've added my DISM.log, CheckSUR.log, and WindowsUpdate.log, if that helps. Any help is appreciated.

2 more replies
Relevance 57.4%

I am unable to turn on the Automatic Updates for Windows and upon start up RUNDLL C:\WINDOWS\eCNKBACD.dll The specified module could not be found. All of this happened after running malware software.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 1:17:53 PM, on 3/24/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAANTMon.exe
C:\Program Files\Verizon\IHA_MessageCenter\Bin\Verizon_IHAMessageCenter.exe
C:\Program Files\Common Files\Intuit\Update Service\IntuitUpdateService.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Mcafee\McSvcHost\McSvHost.exe
C:\Program File... Read more

Answer:RUNDLL Error Message Unable to Update Windows

Good evening. Go here, follow steps 6, 7 and 8 and post accordingly into this thread.

2 more replies
Relevance 57.4%

Hello,

I came across an error when I tried to apply Windows Update on my laptop. However, I would come across this error message.



Imgur: The most awesome images on the Internet

Would there be any way for me to help further diagnose this problem with a log? How would I proceed to obtain this log?

Answer:Unable to update Windows 7 Ultimate 64 bit, error C80003FE

Just do reply #2 from this thread and you should be fine.

Windows Update will not update and I've tried multiple fixes
Is this a new install ? Did this problem just start out of the blue ?

2 more replies
Relevance 57.4%

Dell Inspiron 9300 Windows XP Sp3 with McAfee security/Virus scan as supplied and regularly updated. No previous problems over 2 years of use. After a Windows automatic update requested a re-boot early this morning (16 Dec), the laptop failed to load winxp in any config. The error message displayed: "Isass.exe Application error code:0xc0000006 Please exit etc." On attempting to gain access to Safe mode the same message appears. Repeated attempts to gain any access revealed only one small change; the prefix "services.exe" before the same application error code. Friends, assuming a trojan/worm is not involved, could this be a case of a Hotfix in the update causing the re-boot prob and is there any way of restoring my poor laptop without having to go "console" and code writing etc. Any thoughts would be greatly appreciated and apologies if this message is in the wrong spot as this is my first cry for help on any forum. Thanks Rose

Answer:Unable to boot after Windows update (error: 0xc0000006)

Can you pull up the safe mode screen and try selecting Last Known Good Configuration (your most recent settings that worked)

7 more replies
Relevance 57.4%

I installed a toolbar for the MegaUpload site for the sake of downloading one file, uninstalling it immediately after. Ever since then, the traditional 404 page in Firefox has been replaced with a Megaclick page with links to suggestions and a search bar for Yahoo (not that either of these things are unconvenient, but I liked the old page the way it was).

I actually didn't know the cause until I traced someone having a similar problem back to this forum. By sheer virtue of having seen it elsewhere on this forum, I also ended up realizing that Windows would not update. Windows Defender refuses to update its definitions; automatic updates had been checking daily, but the last actual installation has not been for a month. There are seven updates (two of them critical) that will not install. That's when the problem went from being a nuisance to something that worried me.

Exacerbating my problems is my lack of a virus scanner, which I've been without after my Norton definitions expired over five months ago, and my AVG trial expired. I know it's important to have one, but unfortunately money's tight.

Hope that was thorough enough. I accidentally closed extra.txt and it didn't show up when I ran DSS again. Here's the log:



Deckard's System Scanner v20071014.68
Run by Jasetroncs on 2007-11-28 02:05:56
Computer is in Normal Mode.
--------------------------------------------------------------------------------



-- HijackThis (run as Jasetroncs.exe) -----------... Read more

Answer:Unable to update Windows, Megaclick error in Firefox

There is nothing in your log its all fine.Try this..



Open Firefox and go to Tools->Addons and remove the megaupload plugin and restart firefox.

3 more replies
Relevance 57.4%

Hello, I have attempted to update windows 7 with the : Security update for windows 7 for X64 systems (KB2619339) with only failed results. the error code is : 8007065E

I have CBS logs WINDOWS resource protection found corrupt files but was unable to fix some of them.

Any help is appreciated as I like to keep my windows up to date and am rather confused.

Attached are the CBS logs.

In advance thanks for any help.
Shayne

Answer:Windows unable to update: error code : 8007065E

shayneacids,

Welcome to SevenForums.

Please follow this procedure.

Be sure to delete the existing logs first as explained in the procedure.

Upload ( do not post inline) the resulting SFCDETAILS.TXT file.

System File Checker – SFC

System File Checker checks system files and restores them if possible.

System File Checker places results in:
%windir%\logs\cbs

My preference is to empty the abovementioned folder BEFORE I run SFC.

How to empty the “results” folder
? Run CMD.EXE as administrator
o WIN | type CMD.EXE | do NOT hit ENTER |
o CTRL + Shift + ENTER key combo | YES button
? Type following commands, each followed with ENTER key
o CD %windir%\logs\CBS
o DEL *.*
o EXIT

To run System File Checker:
WIN | type CMD.EXE | do NOT hit Enter| CTRL + SHIFT + ENTER key combo | YES button
WIN is the key with the Microsoft flag on top.

Enter SFC /SCANNOW
When System File Checker finishes---

If you do not see:
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

Then:
? Type EXIT to return
? RESTART your computer
? Run sfc /scannow again

If you do not see:
Windows Resource Protection did not find any integrity violations.

Then:
? Type EXIT to return
? RESTART your computer
? Run sfc /scannow again

If you do not see:
Windows Resource Protection did not find any integrity violations.

Then:
... Read more

2 more replies
Relevance 57.4%

Windows 7 Home Premium 64bit SP1

Apparently her computer has not been able to update 1 file (KB2742595) since it's first attempt on 1/10/2013. And unable to update (KB2789642) since 2/14/2013. The 2 files have been trying to update every few days with no success.

Every time the two mentioned files fail it gives the error code as : error 666. when i ask for more details it gives this information: "WindowsUpdate_00000666" "WindowsUpdate_dt000"

It is worth noting that there have been some updates that have been successful.

A search on the internet provides no results except for a handful in other countries/languages but provide no solution. Any help would be greatly appreciated because I'm assuming her computer is way behind on more than a couple security updates.

below are the most recent details of the 2 failed updates

Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2742595)

Installation date: ‎3/‎25/‎2013 3:03 PM

Installation status: Failed

Error details: Code 666

Update type: Important

A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it. You can help protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

More information:
http://go.microsoft.com/fwlink/?LinkID=261905... Read more

Answer:Solved: unable to update windows 7, error code:666

16 more replies
Relevance 57.4%

When I try to run Windows Update for important updates the system downloads and installs the updates.
I am then required to restart the PC.
When I do so I get the following:
"Failure Configuring Windows Updates"
"Reverting Changes"
The pc then re-starts and tells me I need to install the same important updates.
The updates causing particular problems are:
KB2922229
KB2843630
KB2928562
In addition I am unable to install the Internet Explorer updates issued last week.

I have been able to install optional updates but no important updates since 10th April 2014.

I have tried:
Standard Windows Update from Control Panel
Manual installation of the updates
Also tried in Clean Boot
Manually re-set Update Components
All with Anti-Virus and Firewall turned off.

Any other suggestions would be greatly appreciated.

Regards

BrianLowes

Answer:Unable to update Windows 7 - Error code 800703F1

please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Relevance 57.4%

Unable to update windows, keep getting error code 80072efe. Have tried isolating firewall, anti-virus, without success. Also have deleted catroot folder2 in system 32. Still i am unable to update. If anyone has had this problem and knows the fix i will be very grateful. This error code also prevents updating of anti-virus and spyware.My last microsoft update was in May, so things getting critical now. My system, windows 7 , home premium Need help. joni

Answer:Unable to update windows error code 80072efe

from this click here looks like it may be a nasty. Info on how to get rid of it is also there.

3 more replies
Relevance 57.4%

Hi,
I'm unable to update my Windows - Windows 7 Pro x64. An Error code 800B0100 always appear during update

- Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2789645)
- Security Update for Windows 7 for x64-based Systems (KB2808735)
- Security Update for Windows 7 for x64-based Systems (KB2813170)

I tried disable the firewall and antivirus before update, but no use. I also tried download the files and update offline. But also failed.

Please help. Thank you.
Man

Answer:Unable to update Windows - Error code 800B0100

You have a very large number of file problems.
From the CheckSUR log...

Code:
Unavailable repair files:
winsxs\manifests\msil_system.windows.forms_b77a5c561934e089_6.1.7601.22191_none_ee82d75519cdb09a.manifest
winsxs\manifests\x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.22210_none_6ebd48cf2b868ae6.manifest
winsxs\manifests\amd64_netfx-system.design_b03f5f7f11d50a3a_6.1.7601.18027_none_8abae60415960968.manifest
winsxs\manifests\amd64_microsoft-windows-win32k_31bf3856ad364e35_6.1.7601.22209_none_17b2cef2ca377b92.manifest
winsxs\manifests\amd64_microsoft-windows-winsrv_31bf3856ad364e35_6.1.7601.18043_none_14830bbdb30e2246.manifest
winsxs\manifests\msil_system.design.resources_b03f5f7f11d50a3a_6.1.7601.22191_en-us_fefabb14d4f18b37.manifest
winsxs\manifests\x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.18044_none_6e173b82127da724.manifest
winsxs\manifests\wow64_microsoft-windows-win32k_31bf3856ad364e35_6.1.7601.18043_none_214c9927e5a07856.manifest
winsxs\manifests\msil_system.windows.forms_b77a5c561934e089_6.1.7601.18027_none_0548f35f002d38f9.manifest
winsxs\manifests\wow64_microsoft-windows-winsrv_31bf3856ad364e35_6.1.7601.22209_none_1f92962d0066a978.manifest
winsxs\manifests\wow64_microsoft-windows-kernelbase_31bf3856ad364e35_6.1.7601.22209_none_901677de18a58467.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7601.22209_none_d139c7943b60a596.manifest
winsxs\manifests\wow64_microsoft-windows-kernel32_31bf385... Read more

6 more replies
Relevance 56.99%

Hi,
Just checked for spybot updates and there were a couple.
One of them ( detection rules) appears not to load - I get the message "!!!badchecksum!" Tried a couple of times but same message.

Any idea what this is all about ?
OS = XP home
also running Norton internet security etc 2004

Thanks for any help
Robbie
 

Answer:unable to load spybot update

Robbie said:



Hi,
Just checked for spybot updates and there were a couple.
One of them ( detection rules) appears not to load - I get the message "!!!badchecksum!" Tried a couple of times but same message.

Any idea what this is all about ?
OS = XP home
also running Norton internet security etc 2004

Thanks for any help
RobbieClick to expand...

First of, stop or disable any anti-virus scanners or firewalls like Norton prior to updating..see if that helps, if not uninstall spybot, reboot, then delete the program folder (generall in C:\Program Files\...). And finally re-install Spybot... these are some generic steps you could try, it might help.
 

1 more replies
Relevance 56.99%

Dear All,
My operating system is Vista Home Premium, my PC came with it ready installed and it didn't come with installation disks.
For what seems like an eternity now I've been unable to install update KB938371, which I need to, apparently, before I can proceed with SP1, and of course I also need to load KB937287 but only following KB938371. Every time it gets to installing I get the following error message. Error Code 800B0100 WindowsUpdate_dt000. I've looked for these error codes and haven't come up with particularly useful to date. I would be very much obliged with any help. I'm really fed up with it. Thanks in anticipation of a solution, I hope!

Answer:Unable To Load Update Kb938371

Have you tried scanning for malware, which might be preventing you from updating?Also try downloading the file manually from Microsoft's site here:http://www.microsoft.com/downloads/details...;displaylang=enhttp://www.microsoft.com/downloads/details...;DisplayLang=en

2 more replies
Relevance 56.58%

I'm getting this Windows Update error when installing KB2478663 and KB2518870:

WindowsUpdate_00000643" "WindowsUpdate_dt000
1. 1 Troubleshoot problems with installing updates2. 2 Windows Update error 800B0100

I've been through all suggestions mentioned, and got from another article in this forum that running the following commands might fix the issue or collects the necessary info to help finding the culprit:
sfc /scannow
System Update Readyness Tool

Those commands did not fix the issue, here are the results included, is someone able to help me?

Answer:Windows 7 - Unable to Update KB2478663 and KB2518870 error 800b0100

https://skydrive.live.com/?cid=27e6a...5D1A492AF7!390

Go there and download the dotnetfx_cleanup_tool

See if that helps. The patches you are having trouble with are .net framework updates.

8 more replies
Relevance 56.58%

Hello,
I play a lot of PC games, and in one particular game, I have been having a graphical glitch. This is apparently related to the Windows KB2670838 update, and many people on various forums have solved the problem by removing this update.
I first tried removing the update from 'Programs and Features -> Installed updates', but get an error 0x80073701 'referenced assembly not found'.
Instead I tried to uninstall using the command prompt 'wusu', then tried again in safe mode, and even tried uninstalling IE10, the apparent cause for this update in the first place.
None of these attempts have succeeded for one reason or another, and I wondered if anyone has any help?

Answer:Unable to uninstall windows update KB2670838, error 0x80073701

Rsstn welcome to SevenForums

when you ran wusa /uninstall /kb:2670838 did you run it inside an Elevated Command Prompt ?

Open up an Elevated Command Prompt. Click on in type CMD . Right click on CMD under Programs (1) choose . On the User Access Control window click on the Yes button . Command Prompt opens up to C:\Windows\System32>_

then type

wusa /uninstall /kb:2670838 and press <ENTER>

9 more replies
Relevance 56.58%

Hi,

I am having a problem with updating windows. I ran the SFC and I see that there are some errors detected.

Please assist me with this problem. I have tried several fixes but none have worked. I have attached the CBS log files.

Answer:Unable to Use Windows Update after reinstall - error 800B0100 occurs

Hello stifsplif, welcome to SevenForums!

Your CheckSUR log shows the following corruption:

Code:


=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 20.0
2013-09-05 09:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~x86~en-US~7.4.7600.226.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~x86~en-US~7.4.7600.226.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~x86~~7.4.7600.226.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~x86~~7.4.7600.226.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~x86~en-US~7.4.7600.226.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~x86~en-US~7.4.7600.226.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.4.7600.226.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.4.7600.226.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~x86~en-US~7.4.7600.226.mum Line ... Read more

5 more replies
Relevance 56.58%

For the last couple weeks, I've tried about 10 times to install the update. Get the same error every time, been unable to find any solution online.

More replies
Relevance 56.58%

I am having problems with my computer. I cannot seem to update anything. I am running Windows 7 Home Premium 64 bit. I first noticed that Adobe, Java, and Microsoft Security Essentials would no longer update. I have not tried to use Microsoft Update, but I am certain that would fail as well, which is why I have not even bothered. Every time I tried to update one of those programs, I would get an error saying that the server was unavailable and to please check my internet connection, or it could not update due to an internet or network connectivity issue. However, Malwarebytes Anti malware will update the definitions just fine, for some reason. Microsoft Security Essentials shows the most recent definitions as Jan 4, 2014, so it would seem the problem happened around that time. Running a manual update of MSE definitions gives me an error of 0x80080005. Well, the browser was showing web pages just fine, so after some googling and searching around, I realized that the "Windows Update" service and the "Background Intelligent Transfer Service" were not running. Attempting to restart the computer and manually "start" either of these services would bring up an error message. Trying to manually start Windows Update service gives the error 0x8007277a. I tried to use Microsoft's "Fix-It" solution which also immediately gave me an error saying that the computer failed to connect to all of the servers required to run it, thus it failed. I... Read more

Answer:Windows Update service unable to start, Error 0x8007277a

Hi, Welcome to forums.

This could be an issue with third party winsock. You can reset winsock. Here's how you can do it.

1.Click the Windows Start button.

2. Type Cmd in the Start Search text box and press Ctrl-Shift-Enter (keyboard shortcut to run Command Prompt as Administrator). Click Continue to allow elevation request.

3. Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.

4. Type netsh int ipv4 reset in the Command Prompt shell, and then press the Enter key.

5. If you use ipv6, type netsh int ipv6 reset in the Command Prompt shell, and then press the Enter key.

Note: you may need to run Network Diagnostics afterwards to "repair" your connection after this.

9 more replies
Relevance 56.58%

I have been working on a clients computer for a few days now.  Her computer has been having issues with installing the Windows 7 SP1 update.  Everytime i have tried to run the update i get this error "WindowsUpdate_800B0100" "WindowsUpdate_dt000".
 I have tried every "solution" except for a clean and refresh reinstall of Windows 7.  None of the solutions have worked including using "Fix It"  Update readiness tool and many other solutions found on here as well as many
other reputable sites.  Could anyone guide me to solving this problem?

More replies
Relevance 56.58%

whenever I try to update adobe flash player I get a box saying "unable to load a gui"What is happening and how do I sort it please. Any help welcomed.

Answer:adobe flash update - unable to load gui

try uninstalling using the adobe uninstaller,then reinstall.can also be caused by +get plus software.if using get plus get rid of it.

2 more replies
Relevance 56.58%

Windows 7 O.S. with Kasperky 2010Started having problems with Windows Defender and Kaspersky would not update.Removed Kaspersy, loaded and scanned with AVG av. No problems found.Loaded malware bytes, would not load update. No problem found in scan.Tried to reload Kasperski 2010 and 2011. Stops with error "Installation Interrupted"Ran Kasperky AVPTool.Not sure where to go next.Here is the Hijackthis log.ogfile of Trend Micro HijackThis v2.0.2Scan saved at 9:39:47 PM, on 8/20/2010Platform: Unknown Windows (WinNT 6.01.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16385)Boot mode: NormalRunning processes:C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exeC:\Program Files (x86)\iTunes\iTunesHelper.exeJ:\PC help programs\HijackThis(2).exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://asus.msn.com/R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896R1 - HKLM\Software\Microsoft\Internet Explorer&#... Read more

Answer:Unable tp update/load kasperky,Virus?

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.1.Please do not run any other tool untill instructed to do so!2.Please reply to this thread, do not start another!3.Please tell me about any problems that have occurred during the fix.4.Please tell me of any other symptoms you may be having as these can help also.5.Please try as much as possible not to run anything while executing a fix.If you follow these instructions, everything should go smoothly.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.Vista and Win 7 Users please Right Click and run as Admin all programs that I ask you to run: Malwarebytes' Anti-Malware :Please download Malwarebytes' Anti-Malware to your desktop.Double-click mbam-setup.exe and follow the prompts to install the program.At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware then click Finish.If an update is found, it will download and install the latest version.Once the program has loaded, select Perform quick scan, then click Scan.When the scan is complete, click OK, then Show Results to view the results.Be sure that everything is Checked (ticked) except items in the C:\System Volume Information folder and click on Remove Selected.W... Read more

3 more replies
Relevance 56.58%

Original Post

http://www.bleepingcomputer.com/forums/topic461467.html/page__p__2771159#entry2771159

A few more notes:
Unable to enable firewall
Chrome didnt like DDS
I previously thought combofix was a no go, but after watching GMER try to do it's thing through saved game files (OOTP) that contained over a gig of material, I deleted those saved games. I didnt run combofix again FYI

.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.19120 BrowserJavaVersion: 1.6.0_30
Run by Kyle at 17:47:08 on 2012-07-19
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3582.2187 [GMT -7:00]
.
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svcho... Read more

Answer:Unable to update vista, google won't load

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/463055 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

46 more replies
Relevance 56.17%

I have Windows 7 Home Premium 64 bit, I'm being unable to install the Service Pack 1 for some reason (KB976932). I already tried the System Update Readiness and here's a HUGE log that came up. Please, I'd appreciate any help you guys may give me.

Answer:Unable to install updates in windows 7 error 800B0100 update KB976932

I also used the Windows Update Troubleshooter v1.3 by HackSys Team, still not being able to install the updates. I'll appreciate any furher help for this.

9 more replies
Relevance 56.17%

I keep getting this error every time I try to install update Windows Service Pack 1 (KB976932) on my poor PC. Ran SURT & scf /scannow (integrity error fixed). Here are the log files: Attachment 361175
DxDiag: DxDiag.txt

Please excuse my ignorance & Thanks!

Edit:

Answer:Unable to update Windows 7 Service Pack 1 (Error code 800B0100)

Here's the summary from the CheckSUR scan...

Code:
Summary:
Seconds executed: 1253
Found 2 errors
CBS MUM Corrupt Total count: 1
CBS Catalog Corrupt Total count: 1
Unavailable repair files:
servicing\packages\Microsoft-Windows-Security-WindowsActivationTechnologies-Package~31bf3856ad364e35~x86~~7.1.7600.16395.mum
servicing\packages\Microsoft-Windows-Security-WindowsActivationTechnologies-Package~31bf3856ad364e35~x86~~7.1.7600.16395.mum
servicing\packages\Microsoft-Windows-Security-WindowsActivationTechnologies-Package~31bf3856ad364e35~x86~~7.1.7600.16395.cat
servicing\packages\Microsoft-Windows-Security-WindowsActivationTechnologies-Package~31bf3856ad364e35~x86~~7.1.7600.16395.cat
This looks to me like an attempt to bypass activation and validation requirements...

We need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.x
- in your own thread, please

Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtote... Read more

9 more replies
Relevance 56.17%

Hi I have tried a lot of things but no fix.I was able to import ctl successful and enabled logging and errors 11,41,and 81 were listed 5 or 6 times with consent.exe as aux info.This started after Windows update and bloodhound exploit 281 virus removal and causes boot slowdown.There were a couple reg leaks when shutdown with virus.I have ran sfcscannow and check disc no issues found.Maybe if repair the consent.exe certificates ?Thanks for any info/help!
 

Answer:Hi newbie needs help with error 4107 capi2 from windows update unable to extract .

13 more replies
Relevance 56.17%

Hi, I'm having a major virus/malware issue as my McAfee firewall protection stopped working suddenly. Called McAfee to reinstall the virus software and they were unable to install it. They said that since my Windows Update feature is not working (there is a big red X and updates are not downloading and installing) the McAfee installation is failing. Asked me to fix this issue first and then try McAfee installation.

Not sure what to do, any adivse? thanks.

Answer:Unable to install McAfee Virus software due to Windows Update error

You say your Windows Update is not working, yes? Try this Windows Update - Reset then try reinstalling McAfee. And it might not hurt to do this SFC /SCANNOW Command - System File Checker

4 more replies
Relevance 56.17%

I cannot get windows to load the drivers for a Jabra UC Voice 550a MS Duo USB headset. Under Devices, Windows 7 shows lists this headset by name as an Unspecified device.  In device manager, Windows 7 lists this headset under "Other devices". 
I called Jabra Support and they say this is a Windows problem.  It must be in configuration somewhere or related to several Windows Updates that occurred on my PC on Oct 2nd, 2014.  Prior to Oct 2nd, 2014, this headset worked and this headset still
works on other PCs.  Any help will be very much appreciated.

Answer:Windows 7 unable to recognize any USB communication headset. Unable to load driver.

Hi robh,
Do the other USB devices work correctly? Have you tried to plug in with another port?

I recommend you to follow these steps to have a fix.
Step1.Run this fix it tool  to have a check .
Hardware devices are not working or are not detected in Windows
http://support2.microsoft.com/mats/hardware_device_problems/
Step 2.Reinstall the headset driver, you may need to manually download the headset driver from the manufacturer website and install the driver for this device.
Step 3.Uninstall and reinstall the USB controllers from the device manager and then plug in the headset  to have a check.

To do this :
In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" , click "OK", repeat for each device and restart . Windows 7 will reinstall all USB controllers
automatically.
Meanwhile, here is a link for reference:
Error: ?USB Device not recognized? when you try to access a USB external hard drive.

https://support.microsoft.com/kb/2654149?wa=wsignin1.0
Best regards 

4 more replies
Relevance 55.76%

Hey all!

Sorry i need help with my laptop and i'm hopeless with IT. My laptop (running on windows xp - home) suddenly went bonkers yesterday. whenever i start my comp 2 messages will come up.

the first one says "windows cannot load the locally stored profile. Possible causes include insufficient security rights or a corrupt local profile...."

the second one says "windows cannot load the local profile and is loading you with a temporary profile..."



i tried to use the recovery disc to reformat my comp but everytime i will encounter an error message "setup was unable to create, locate or modify a critical file (c:\\BOOT.ini) needed to start windows xp. access is denied" and then it would just undo all the changes. but when i go to my computer => properties => advanced => recovery and setup i could edit the boot file



i tried pressing f2 to access bios or f10 on start up to try to boot my comp using cd but somehow the option is not available to me.



do you have any advice as to how to sort this out?



thanks!
 

Answer:Need help - Windows XP unable to load local profile + unable to reformat

Make and model of computer? I ask because F2 is not the key I press on some of my computers to access the BIOS. I need to be sure you are selecting the correct keys.
 

3 more replies
Relevance 55.35%

unable to install/update windows phone apps/os error code 0x800706d9.
OS build 10.0.10586.71
am the only person facing it?

Answer:Why am I unable to install/update Windows phone apps/os error code 0x800706d9?

I have the same problem. Have you resolve yours?

more replies
Relevance 54.94%

Hello, I have recently been having issues with my computer following a nasty WoW account hack. After my account was hacked I have been unable to use Windows Update and get a connection error or no result. I have tried to follow the Microsoft help and none of their troubleshooting has helped. I have ran AVG scans multiple times as well as MBAM and sometimes find infections but have them removed. Currently neither show any infections. Rkill also finds nor terminates anything but C:\Windows\system32\rundll32.exe. Today I am unable to connect to the internet using IE7 or connect to many of my online games, but can connect via Firefox. I have Hijackthis logs if requested.After reading this I realize I gave very little information... Sorry Please feel free to ask additional questions. DDS (Ver_10-03-17.01) - NTFSx86 Run by Eric at 20:16:25.81 on Thu 05/27/2010Internet Explorer: 7.0.6002.18005 BrowserJavaVersion: 1.6.0_13Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3071.2038 [GMT -4:00]SP: Spybot - Search and Destroy *disabled* (Outdated) {ED588FAF-1B8F-43B4-ACA8-8E3C85DADBE9}============== Running Processes ===============C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k rpcssC:\Windows\system32\Ati2evxx.exeC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrict... Read more

Answer:Unable to use Windows Update, Unable to use Windows Update, access internet from IE7 or Chrome.

Hi Withering,Welcome to Virus/Trojan/Spyware/Malware Removal (VTSMR) forum. I am going to assist you with your problem.Please refrain from making any changes to your system (scanning or running other tools, updating Windows, installing applications, removing files, etc.) from now on as it might interfere with our fixes. Please let me know in your next reply if you agree with this.This should restore the Internet connection issue but not the Windows update and redirection. Those issues we resolve the next round.Please run Notepad (start > All Programs > Accessories > Notepad) and copy and paste the text in the code box (without the word CODE) into a new file:[email protected] OFFReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable /fReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyServer /fproxycfg -dGo to the File menu at the top of the Notepad and select Save as.Select Save in: desktopFill in File name: look.batSave as type: All file types (*.*)Click save.Close the Notepad.Locate look.bat on the desktop. It should look like this: Right-click to run it as administrator.A window flashes, this is normal. You should now be able to use IE.Please download MBR.EXE by GMER. Save the file in your Windows directory (C:\Windows).Download http://download.bleepingcomputer.com/farbar/TDLfix.exe and save it to your desktop.Right-click TDLfix.... Read more

8 more replies
Relevance 54.94%

I have a X61s Model 27G.I cannot perform System Update via Lenovo Productivity Center. Gives error msg (in my native language pt) thatunnable access Proxy server.I have a wireless broadband conx and  access net  without problems. Can someone help?Brgds Edu

Answer:Unable connect System Update (LNV Prod Center). Error msg: Unable access Proxy server.

edutex wrote: I have a X61s Model 27G.I cannot perform System Update via Lenovo Productivity Center. Gives error msg (in my native language pt) thatunnable access Proxy server.I have a wireless broadband conx and  access net  without problems. Can someone help?Brgds EduI think I've posted this in the TVT forum as well, but I'll go ahead and respond here, cos that's easier than tracking down previous posts It's probably your proxy settings in IE, which is where TVSU gets its network access info.  Do this:Open IEClick Tools -> Internet OptionsClick Connections TabClick "LAN Settings" buttonCheck your proxy settings.  Most likely you want to use "Automatically detect settings" and clear any other checkboxes.Click OKClick OKTVSU should work now.

5 more replies
Relevance 54.94%

When I use Google, I can search just fine, but if I click on a link (one of the search results) I am redirected to a random website, some of which are blocked by my anti-virus software saying that the website is dangerous. This doesn't only affect Google, however, it affects any search engine that I have tried (Yahoo!, Bing, Google, Ask). Another problem that I have been having is a random "Script Error" message that will pop up, saying "continue running script?" with the choices "yes" and "no." It interrupts whatever I am doing and if I hit any keys while it is open, it automatically selects "yes." I hit no whenever I can, but this pop-up issue has been preventing me from playing games, as I get interrupted and die, writing papers for school, because it constantly pops up and disallows me from concentrating or typing correctly. There seems to be no result whenever I accidentally select yes. Next, although I muted it, there is an unknown source of audio that just has a man and a woman saying random words. It almost sounds like a skype conversation, because of the influction and tone. When I created a guest account for my dad to use on my laptop, the audio was everpresent, but I could not find where it was coming from when I tried to mute it. Finally, to top off all of my computer problems, Windows desperately tries to force me to update it, but whenever it attempts to, it begins the update, then stops somewhere before ... Read more

Answer:Google redirects, ghost audio in background, script error pop-ups, and windows unable to update

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

31 more replies
Relevance 54.94%
Question: C++ Compiler error

I've programmed and compiled a programm with devcpp and it doesn't works but on linux it runs. So, why do programms run on linux in official c++language and on win-xp (devcpp) they don't???
 

Answer:C++ Compiler error

There can be tons of reasons. First off any system calls would break it immediatly. Since as it implies a system call is a something run by the users system. Which means they vary with diffrent OS's.

Without seeing the code it's hard to say exactly what was written that doesn't work. It could be something minor or it could be tons of things.
 

1 more replies
Relevance 54.94%
Question: c++ compiler error

fatal error C1083: Cannot open compiler intermediate file: 'C:\WINDOWS\TEMP\a03400in': Input/output error

the location always changes when attempting to build the same source.
EXAMPLE: 'C:\WINDOWS\TEMP\a03421in'

why is it looking there?

please note that i own visual studio 6
 

Answer:c++ compiler error

Novus Natio said:





fatal error C1083: Cannot open compiler intermediate file: 'C:\WINDOWS\TEMP\a03400in': Input/output error

the location always changes when attempting to build the same source.
EXAMPLE: 'C:\WINDOWS\TEMP\a03421in'

why is it looking there?

please note that i own visual studio 6Click to expand...

problem resolved. anti virus real time scamming prevented the compiler from running.

couldn't edit original post, sorry for double post. just thought it would be useful to other members.
 

1 more replies
Relevance 54.53%

Hi all,

I've got a an issue with one, maybe 2 systems on my network. My PC is Windows 7 based and a month or so ago started to act strange while connected to the net. Google redirected me to pages I had not asked to go to, some pages would not load at all until I manually type the URL in & Malwarebytes would no longer update -I just recieve an error and the scan shows 0 infections.

I use McAfee 8.7.0i Enterprise as my main Anti-Virus app and this also find nothing. I work in IT so I have seen this kind of thing before, I tried to clean my system with the usual tools even trying bootable CD version of AV scanners, nothing seemed to permently fix this issue though and even when my PC showed as being infection free malwarebytes would not update so I wiped my system, formatting my C: partition and then re-installed Windows 7.

My issue now is that even after a clean install I find I have exactly the same problems. Has anyone seen this before or have any idea how I go about cleaning it? The re-install seemed to fail to remove this issue last time so I guess that was not the way to go....

Cheers!

Answer:Google redirects, Malwarebytes unable to update and webpages which no longer load...

Have you eliminated an infected router?

Did you delete the partition before formatting?

15 more replies
Relevance 54.53%

Hi,

I have used Registry Cleaner to clean my Windows XP registry. After having removed invalid file extensions I suddently get many pop-up windows with the error "Unable to load btrez.dll, DANISH".

The file btrez.dll has not been removed. It is some bluetooth driver - don't know to which device.

What can I do about that - except for role-back of my registry (but that was not the point of using a registry cleaner).?

Michael
 

Answer:Error: Unable to load btrez.dll ...

I am guessing this is a laptop with bluetooth. Registry cleaner has been known to remove some extensions that cause bluetooth problems. I would go to the computer manufacturer website and update your bluetooth drivers.
 

3 more replies
Relevance 54.53%

I need to fix error "Unable to load graphics security filter"

Answer:Fix error Unable to load graphics sec.fil

This would be a good place to start: http://www.computing.net/howtos/sho...

2 more replies
Relevance 54.53%

err i have installed Smartdoctor, but whenever i launch it it say error: unable to laod EIO.DLL.
help please?
i have tried reinstalling.
TYYY

More replies
Relevance 54.53%

On booting up Windows ME I receive the message "Unable to load sys.dll". Tried Scandisc to repair damaged file. Tried a registry cleaner. Tried the Restore function. All to no avail Though it appears to not adversely effect the working of the computer. It is quite irritating.Any suggestions very gratefully received

Answer:Error message "Unable to load Sys.dll"

Selective startup options in MSCONFIG including,Load Startup group items ? Process System.ini file "checking"Process Win.ini file Load static VxDs Load environment variables

1 more replies
Relevance 54.12%

Greetings!(I have been directed to post here from the "Am I infected?" forum. My previous thread is located here).My Windows Vista (32-bit) has been unable to update for over two months. Windows Update has tried to install the latest Definition Updates for Windows Defender, but has experienced a Code 8024402C error each time. I do not access the internet through a proxy and setting "Automatically detect (LAN) settings" in Internet Explorer did not resolve the problem.It seems I am unable to access selected websites: Firefox cannot find the servers at download.microsoft.com and www.yahoo.com, even though these sites work fine on other computers using the same home network.At times, IE also attempts to flood my screen with pop-ups pointing to a broken non-URL, most often when I re-log into Vista after waking up my computer from Sleep mode.I paste (DDS) and attach (Attach, ark) the requested logs below.Thank you for your help in advance!.DDS (Ver_2011-06-23.01) - NTFSx86 Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_26Run by Severan at 18:45:03 on 2011-08-19Microsoft? Windows Vista? Ultimate 6.0.6002.2.1252.1.1033.18.2037.1231 [GMT 8:00].AV: Symantec Endpoint Protection *Enabled/Updated* {88C95A36-8C3B-2F2C-1B8B-30FCCFDC4855}SP: Windows Defender *Enabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}SP: Symantec Endpoint Protection *Enabled/Updated* {33A8BBD2-AA01-20A2-213B-0B8EB45B02E8}.============== Running Processes ============... Read more

Answer:Windows Update Error (8024402C), Unable To Access Certain Websites, Random Internet Explorer Pop-Up Flooding

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/415180 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

20 more replies
Relevance 54.12%

Hello,
I am making a project that mixes AVR assembly with C code. I was scooting along and after writing a chunk of code in assembly, I tried to compile and I got one error. The error said that, right before my void main() line, I needed a ',' or a ';'.
I don't believe that I am missing one of those in a previous statement.

I would appreciate it if you guys could look at my code and tell me what you think:

Code:

[SIZE="4"]
//include statements
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include "regs.h"
#define sbi(port, bit) (port) |= (1 << (bit))
#define cbi(port, bit) (port) &= ~(1 << (bit))

//\/this is where it tells me that I need to have
//\/A comma or a semicolon, right before 'int'
int main()
{
//regular C code here

[/SIZE]

-Thank you ahead of time.
 

More replies
Relevance 54.12%

I try to compile a header file and an implementation file.
I get an error message :"fatal error C1001: INTERNAL COMPILER ERROR
(compiler file 'msc1.cpp', line 1794)
Please choose the Technical Support command on the Visual C++ Help menu, or open the Technical Support help file for more information
Error executing cl.exe."

Any ideas on how to fix the error?
thanks for reading this.
 

More replies
Relevance 54.12%

Database accessed from a network share, Database works correctly on 1000 computers and fails on 3. These 3 have been added to the network lately. The problem appears to be computer specific as they have recieved the same image as previous computers. when a command button on the database menu is pressed a compiler error appears 'can't find project or library' and a VBA statement Msgbox error$ is highlighted.
Is it possible that a Debug facility is switched off on the older computers?

Any Ideas would be appreciated
 

More replies
Relevance 54.12%

High spec XP desktop - suddenly developed this problem - on starting up loads pages ok - after 10 - 15 minutes or so it takes ages to come up with an error message unable to load pages - it applies to any pages or emails - when restarted it works OK again for a time then the message comes up again - it drives me nuts - I am completely at a loss what to do or where to look -help please

Answer:error message unable to load pages

jarani - if this has just happened recently you could try a "system restore" - restore to a date prior to the problem occurring.

3 more replies
Relevance 54.12%

Received the following error upon startup:

"Your SQL Server installation is either corrupt or has been tampered with (unable to load SQLBOOT.DLL). Please uninstall then re-run setup to correct this problem".

I'm not clear how a SQL Server item got on my computer -- it's not required for the work or needs I have.

I've attempted to remove the item from ADD/REMOVE PROGRAMS from CONTROL PANEL but the item does not appear.

Can anyone assist with a solution? Thanks!

Answer:SQL Server Error - Unable to Load SQLBOOT.DLL

Hi farefield. Yes, I have seen this error too. You may try the repair corrupt sql server sqlboot.dll application, it quickly fixes database corruption problems. At least, it worked for me

2 more replies
Relevance 54.12%

This error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error.
Occurs on some web pages when using Chrome and firefox but not when using IE10, I have tried reinstalling google chrome but the error still shows up. Does anyone have any idea on how to solve this error?

Thank you in advance

Answer:Unable to load some web pages SSL protocol error.

Did the errors with both browsers start at the same time? If so, I'd be concerned of some sort of infection. Suggest you scan with some good free programs like Malwarebytes and Superantispyware.

There are SSL settings in both browsers, but they should not both be having the same issue. Is it the same pages that always trigger these errors? can you post an example? I'd hate to advise on changing settings to make it work until you have confirmed the system is clean. A Guy

3 more replies
Relevance 54.12%

hey my computer is not working when i reset it it gives me an error that says "userinit.exe - application error" then i press ok and it only shows my desktop but nothing else then i press ctrl+alt+del and it says that "the administrator has disabled task manager" which i think has to do with the userinit.exe failing or else i would just run explorer.exe. it also gives me the error if i start it in safemode.

please help

Answer:error with userinit.exe unable to load desktop

your going to need to boot to the XP cd and then go into the recovery console. From there, run sfc /scannow. That should allow you to recover whatever it is that went wrong.

I hope anyway..
Good luck

7 more replies
Relevance 54.12%

Hi

every time I start My Pc I get this error message

" Error: Unable to load resource dll:smcp_fra.dll "

How can I fix it, it's getting annoying !!!

Thanks for your help!
 

Answer:Error: Unable to load resource dll:smcp_fra.dll

6 more replies
Relevance 54.12%

Hi everyone!

I am trying to install Windows XP Pro [it has neither service packs included] onto a new build and I keep receiving the same messege:

A problem has been detected and windows has shut down to prevent damage to your computer. Check to see if there is adequate disk space. Blah, blah, blah!

Included in the messege are stop numbers etc.

I am wondering if this is due to using the Maxtor SATA HD. I noticed in the Maxtor manual it says I must first load a driver? Says I need to load driver onto a floppy disc and do it that way?

I am not even sure where to find this driver. Is it on my ECS motherboard disc? Is this truly the problem?

Please, can somebody help me?

Desperate for some understanding.

Freddy

My new $296 computer system

E4500-$118
ESC 945GCT-M V.2.0-Free with Processer
OCZ DDR2 800 2x1GB=2GB - $4.99 for both
Maxtor 300 SATA [x2]-$64 ea.
E-GeForce 6200 LE 256 PCI-E [not installed yet] - free
Memorex Dual Layer 16X DVD +R DL Rewritable - $19.99
Cooler Master Extreme Power Duo 600W - $4.99
Microfly Mini ATX Case $19.99

Answer:Unable to load XP Pro due to stop/error messege

Hmmm... that doesn't sound like the issue you are describing. I don't think it will BSOD because it can't find the driver for the sata drive. You would just get a blue screen letting you know that no driver was found, etc etc.

I would suggest going thru your system and making sure everything is hooked up, seated properly, etc etc

9 more replies
Relevance 54.12%

Hi,

Interesting problem but so far unable to find a solution.
Dell GX1 Windows NT machine connected to a domain.

I am unable to log into the machine (local) by using the local username and pswd. Error message states "operating system unable to load profile. Contact Network Administrator (5). All that happens is the login screen just keeps reappearing.

However, I can log in locally from other machines with the same userid and password.

When trying to login to the domain with with the userid and passwd, some "unable to load profile" error message appears.

But I am able to login to the domain from another machine with same userid and pswd with no problem.

Now, either locally or on the domain, I can login with an administrative account with no problem.

It just seems that from one particular machine, the local and domain login does not work.

I've deleted user profiles, expect for Adm, All User and Default Users, hoping that recreating a fresh profile would work. It doesn't.

If anyone else has experienced this problem and has a solution, I would appreciate hearing about it.

Thanks,

David

 

Answer:Unable to load user profile error

Check the permissions on the computer. I had a problem like that where the permissions had been changed on the profiles folder and the profile could not be loaded.
 

3 more replies
Relevance 54.12%

My computer went out when there was a power circuit overload that tripped the breaker. After that windows gave an error "LSASS - Unable to Load Component ?????" error. I should have ran the System File Checker as everyone in Google recommends, but where I was I didn't have an internet connection to look it up. I started the Windows XP in-place reinstall instead, but now when Windows Setup loads it gives the same LSASS error except it doesn't mention any file, it merely says "lsass.exe: unable to load component" at the top of the error window, and the dialog says, sic: "the application has failed to start because." No matter what I do, it will keep popping up. Also Windows Setup won't complete, it just reboots the computer. Spinrite did find one bad sector on the drive, so I will redo the in-place reinstall. Does anyone have any ideas how to fix this in the meantime?
 

More replies
Relevance 53.71%

Out of the blue, I got hit with a virus the other day. The most obvious aspect was "Antimalware Doctor", which I have since removed. I've run many scans, including avast boot scans, spybot s&d, combofix, and malwarebytes' antimalware.

Now it seems I am down to the following issues:

I am unable to load the Microsoft Update website
When I run a search in Google, the result links I click often redirect to an ad site
After my computer has been on for a while, I receive a "Generic Host Process for Win32 Services" crash message, which is soon followed by a loss of internet connection

Below are the requested logs, and attach.txt from dds is attached.

Hijackthis Log
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:39:55 PM, on 12/8/2010
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\AIM\aim.exe
C:\program files\steam\steam.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceServ... Read more

More replies
Relevance 53.3%

Hi there! I have the same problem. Today I've update my software by Lenovo updater and installed wireless display software, after I've rebooted my laptop and try to open the app I have this:  If it important my switched on radio divice as those:  What should I do to make WiDi to work? P.S.: I have  an original, not tablet version of x220 Thanks.   





X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.









Solved!

Go to Solution.

Answer:Intel Wireless Display Unable to load DLL error

Hi EvgenyP!
 
The Intel My WiFi dll file is missing. To install it, download the Intel Wireless LAN drivers for the X220, and make sure that the My WiFi component is installed:
Lenovo Support - Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Windows Vista (3...
 
Hope this helps, and come back and tell us how it goes!

2 more replies
Relevance 53.3%

I'm hoping someone can help me. I have a Gateway laptop running Windows XP Pro - SP2. My laptop was infected with some sort of Adware that took control over my homepage and blasted me with spyware popups. I already had downloaded "Super AntiSpyware" to my computer so I ran it. It cleaned up the the problem files and asked to reboot the computer. I selected the option to reboot and went through the restart operation. As the computer was coming up, it went to a blue screen and restarted the reboot and paused at the recovery screen. I selected "restart in last known good configuration" and the computer came up fine with the exception being I lost my internet connection options. When I went to view my device manager files, both my Broadcom 440x 10/100 Integrated Controller and my Broadcom 802.11g Network Adaptors had the caution signs over them with the error code stating "The device is not working because Windows cannot load the drivers required for this device. Code 31". here's what I've done to try to correct the issue;Unload the drivers and reload the hardware.Unload the drivers and reboot the system to let it find the devicesLoaded new updated drivers (via stickdrive from another computer)Used every option in the troubleshooterPerformed all of the above in both Safe and Normal ModesDo a System Restore to a date prior to the problem. - Didn't help as System Restore was disabled. Lesson learned.None of the above resolved the proble... Read more

Answer:Unable To Load Network Device Drivers - Error 31

Hello Nevada DavePlease follow the instruction in this linkPreparation Guide for use before posting a HijackThis LogYou can skip to Step 9 as you have done the rest already.Then post that log here HijackThis Logs and Malware Removal NOT in this forum.

3 more replies
Relevance 53.3%

I'm hoping someone can help me. I have a Gateway laptop running Windows XP Pro - SP2. My laptop was infected with some sort of Adware that took control over my homepage and blasted me with spyware popups. I already had downloaded "Super AntiSpyware" to my computer so I ran it. It cleaned up the the problem files and asked to reboot the computer. I selected the option to reboot and went through the restart operation. As the computer was coming up, it went to a blue screen and restarted the reboot and paused at the recovery screen. I selected "restart in last known good configuration" and the computer came up fine with the exception being I lost my internet connection options. When I went to view my device manager files, both my Broadcom 440x 10/100 Integrated Controller and my Broadcom 802.11g Network Adaptors had the caution signs over them with the error code stating "The device is not working because Windows cannot load the drivers required for this device. Code 31". here's what I've done to try to correct the issue;Unload the drivers and reload the hardware.Unload the drivers and reboot the system to let it find the devicesLoaded new updated drivers (via stickdrive from another computer)Used every option in the troubleshooterPerformed all of the above in both Safe and Normal ModesDo a System Restore to a date prior to the problem. - Didn't help as System Restore was disabled. Lesson learned.None of the above resolved the proble... Read more

Answer:Unable To Load Network Device Drivers - Error 31

I think you should post at http://www.bleepingcomputer.com/forums/f/103/am-i-infected-what-do-i-do/ for more responsive knowledge attuned to your situation.Please read and follow the suggested procedures there.Louis

4 more replies
Relevance 53.3%

I have a Delkin Devices Reader-4. I recently upgraded my computer to Windows XP from Win 98 and the reader no longer works. When I try to uninstall the software program I get the message: Internal error, unable to load or call external DLL .

Any ideas how to work around this?
 

More replies
Relevance 53.3%

I successfully installed build 10159 when it came out (the prior builds were also successfully installed); however, when I tried to download 10162, the download appeared to be successful, but the install step failed, giving me the 0x800705b4 error message.

I checked the $Windows.~BT subdirectory and the only large file was WindowsOld.wim which was downloaded on July 1st. There was no ESD file in the subdirectory. The .wim file was the latest; no files were dated with today's date..

My platform is a Dell OptiPlex 745. It was stock OEM when I got it, but I've increased the RAM to 8GB, replaced the DVD/CD drive with a newly purchased LG M-DISK "super multi" drive, added a WiFi adapter, and added a NVidia GeForce 8400GS (I'm running three displays on the machine). Performance has been acceptable with the new configuration.

What are my next steps?

Answer:Unable to load build 10162, error 0x800705b4

Just for giggles try updating Windows Defender first and then try running the update again... You could also try disabling it completely and then installing it. This isn't the first build users have had this issue on and oding those 2 things are ways that others were able to get around the issue

9 more replies
Relevance 53.3%

Hi all - in desperate need of some help because I don't really know what I'm doing,

Family's desktop computer working absolutely fine last night (& I was the last person on it) however this morning when my brother turned on computer (& every time we have restarted it since) we are getting the "blue screen of death" with the BAD_POOL_CALLER message with stop code:
0x000000c2 (0x00000043, 0xd6e2f000, 0x00000000, 0x00000000).

Stuck this info into google (& on microsoft support site which was no use at all) & I am now in possesion of a BAD_POOL_CALLER fix which I need to enter Safe mode to install, however when I try to enter Safe Mode I once again get a BAD_POOL_CALLER message with stop code:
0x000000c2 (0x00000043, 0xce8af000, 0x00000000, 0x00000000).

Any help is appreciated,

Thanks

Answer:BAD_POOL_CALLER Error - unable to load Safe Mode....

Welcome to TSF....

This is what I found on this error message:

http://kadaitcha.cx/xp/stop_error.html#0x000000C2

2 more replies
Relevance 53.3%

I have a new X220 tablet, out of the box with all software and driver updates applied and I am getting an error when trying to start the Intel Wireless Display (WiDi) software. When I run the software I get an Intel WiDi error box with the message "Unable to load the Intel My Wifi Technology DLL file." I have uninstalled and reinstalled the intel drivers and software using both the version available from Lenovo and the latest version on the Intel web site. I get the same error for all versions of the driver and software that I have tried.  I've seen comments about similar issues on the Intel communities forum but no fix has been published. I can't find any reference to a similar issue on the lenovo community forum or knowledge base. Has anyone else experienced this issue? Has anyone been able to get the Wireless Display software to work on the X220 tablet? Thanks

Answer:Intel Wireless Display Unable to load DLL error

hey DavidES,remove the Wireless Display software. download the version available from our support site but do not install it yet.set your windows to operate using Diagnostic mode via MSCONFIG. Once that is done, install the software while the unit is in Diagnostic mode.Check and see if the problem persist with Diagnostic mode and in normal mode.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

3 more replies
Relevance 53.3%

Hi all - in desperate need of some help because I don't really know what I'm doing,Family's desktop computer working absolutely fine last night (& I was the last person on it) however this morning when my brother turned on computer (& every time we have restarted it since) we are getting the "blue screen of death" with the BAD_POOL_CALLER message with stop code:0x000000c2 (0x00000043, 0xd6e2f000, 0x00000000, 0x00000000).Stuck this info into google (& on microsoft support site which was no use at all) & I am now in possesion of a BAD_POOL_CALLER fix which I need to enter Safe mode to install, however when I try to enter Safe Mode I once again get a BAD_POOL_CALLER message with stop code:0x000000c2 (0x00000043, 0xce8af000, 0x00000000, 0x00000000).Any help is appreciated,ThanksDan

Answer:Bad_Pool_Caller Error - unable to load Safe Mode

If you can't get into windows or safe mode then easiest option is to do a repair but you need a CD.Still needing a CD you could try this first-Go to Recovery Console and type:cd system32\configren system system.oldren system.alt systemalt.oldcopy c:\windows\repair\systemcopy c:\windows\repair\regback\systemexitRecover from a Corrupted Registry Preventing Win XP from Startingclick here;EN-US;q307545Repair XP by install over the top of existing system1. Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.2. When you see the "Welcome To Setup" screen, you will see This portion of the Setup program prepares Microsoft Windows XP to run on your computer:To setup Windows XP now, press ENTER.To repair a Windows XP installation using Recovery Console, press R.To quit Setup without installing Windows XP, press F3. 3. Press Enter to start the Windows Setup. To setup Windows XP now and Repair Install , press ENTER. DO NOT choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console). 4. Accept the License Agreement and Windows will search for existing Windows installations.5. Select the XP installation you want to repair from the list and press R to start the repair.6. Setup will copy the necessary files to the hard drive and reboot. Do not press any key to boot ... Read more

10 more replies
Relevance 53.3%

Having installed the game, attempted to play and got the following error report 'DirectX encountered an unrecoverable error'.So I downloaded DirectX 9.0 and also updated my Nvidia drivers. I was then able to choose a new game 'SAS' this then loads up to about 7/8 and the screen freezes. At this point 'Soap MacTavish 22nd SAS' is shown on the screen. THEN it states ? DIRECT3DDEVICE9:: Present failed: driver internal error? Any ideas, please? I have not had any problems with Call of Duty or Call of Duty2. These have been uninstalled.Computer system more than meets the minimum requirements.I have also sent an email to the Support Activision help line on the 16 Nov as yet no reply. I have checked their forum support site nothing has appeared there yet either.Thank you.

Answer:Call of Duty4 for PC. Unable to fully load, error.

Does this game meet the requirements for the game by any chance, tell us what graphics card you have?

10 more replies
Relevance 53.3%

Upon start screen computer gives message: "error loading operating system"
Computer: Dell D-600 laptop
xp pro
 

Answer:error: unable to load operating system message

6 more replies
Relevance 53.3%

I loved AOE, so I recently purchased AOM. The problem is that as soon as I type in my product reg key, I get an error message that reads "Cannot load PidGen.dll". I can't proceed past this point. Ugh. Has anyone else encountered this? I'm not very knowledgable about dlls, but I think that one is a system dll that is used to read microsoft product codes, from what little came up when I did some searches on it. I'm so frustrated at being unable to even install the game. I've had some other dll/ocx errors lately, and I can't seem to solve them. My sys specs are:

Operating System: Windows 98 (4.10, Build 2222) A
Language: English (Regional Setting:
English)
System Manufacturer: n/a
System Model: n/a
BIOS: n/a
Processor: AMD Athlon(tm) XP 2000+, MMX,
3DNow, ~1.7GHz
Memory: 512MB RAM
Page File: 104MB used, 1432MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
DxDiag Version: 4.09.0000.0902 32bit

ANY help or advice would be so appreciated! Thanks in advance,
Vix
 

Answer:Age of Mythology Unable to Install- PidGen DLL Load Error

6 more replies
Relevance 53.3%

Help anybody?Unable to load my viruis because of the error message (Error-unable to load Real-Time Scanner) When I try manualy to enable my viruis protection it comes up with a scipt error. Hope you can help. Regards Davesbits

Answer:Error-unable to load Real-Time Scanner

i have the same problem can u help me thanks

4 more replies