Computer Support Forum

250GB Hard drive, Windows only allows 131GB partitionable

Question: 250GB Hard drive, Windows only allows 131GB partitionable

I recently upgrade my PC, and have installed a NEW 250 GB S-ATA Hard drive.
My bios has been upgraded, and when in the BIOS setup it recognizes the drive as what it should be, 250GB, When I was installing XP and creation a partition thru the intall progam it only let me setup a 131GB partition. I set up a 100GB partition and left the rest to play with afterwards. In the Computer management/disk manager in XP I have my 100GB partition and only 30GB of unallocated space to work with.

Does anyone know how I can resolve this problem?

Shamus

Relevance 100%
Preferred Solution: 250GB Hard drive, Windows only allows 131GB partitionable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: 250GB Hard drive, Windows only allows 131GB partitionable

Since this was a fresh install you need to add SP2. XP came out with a 137G limitation which was addressed with SP1. SP2 has replaced SP1.

If you only want a single 250G partition there are a couple of ways to address it.

1) Install SP2 and then run Partition Magic to resize the primary partition to pick up the extra 150G.

or
2) Slipstream SP2 into your copy of XP and then start over from scratch with a fresh install.
Chas

2 more replies
Relevance 88.56%

Just received and installed Maxtor 250GB HDD.I have a Maxtor 120GB as master drive, partitioned as C,D drive, all OK.Slave drive is the 250GB HDD. Been into Disk Manager and it shows as a 131GB partitioned drive.Been in Bios and it shows as 250GB. Where's the rest gone

Answer:XP will only recognise 250GB HDD as 131GB

click here

6 more replies
Relevance 79.13%

I have a western digital 320GB SATA hard drive which is brand new. I uninstalled windows xp to install the pro version and now its saying i only have 131gb of space... how can I make it recognise the rest? i have not yet installed my new windows xpthanks everyone!

Answer:my 320gb SATA hard drive has shrunk to 131gb! HELP

please lend a helping hand someone!

4 more replies
Relevance 77.08%

Hi beautiful people,

Currently im using a 60gb partition for windows 7 32 bits ultimate in a SATA HD (AIHC mode), i've been told in the past that it is not recommended to use the entire HD as one partition cause slows the system (the needle works more), is that still true?

Answer:Windows 7 in a 250GB Hard Drive

To a certain extent yes, It is better to have one partition in the top of your drive to hold your system files (programs, drivers, etc) and another partition to hold your data. This will help your system run faster.

However, you cannot just rely on this alone. You should do regular disk cleanup using a program like CCleaner (don't use the registry cleaner option) and defragment your hard drive regularly as well.

9 more replies
Relevance 75.44%

There is in regards to my SimpleTech portable hard drive and My new Dell Inspiron N7010 17R which has windows 7. It tells me that it can not recognize the device when I plug it into my USB port. It works great in my Dell Inspiron that has windows XP and my Lenovo at work that also runs windows XP. I have tried another laptop at my place of employment that has windows 7 on it and I get the same error message on that machine also. It has to be a conflict with the SimpleTech 250gb and Windows 7.
Your Help is very much appreciated!!

Answer:simpletech 250gb external hard drive & windows 7

Hi and welcome to TSF please try here to see if there is something at the support site for your drive to work with win 7 http://www.simpletech.com/support/support_downloads.php

3 more replies
Relevance 73.39%

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

Answer:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

2 more replies
Relevance 67.65%

If I attach my 250gb hard drive to a 6 yr old mobo, should it recogise it?I purely want to be able to run the maxtor powermax dos util software and won't be booting into windows at all.thanks.

Answer:250gb hard drive and 6yr old mobo

Only way to find out is try it.

6 more replies
Relevance 67.65%

I am new to this forum and have a question.

I have a new computer with Windows 7 home basic on it and all works well. Except the external harddrive of Iomega 250GB USB 2.0. The computer doesn?t see the drive. On this drive is are the backups of files that I want to install on this new computer.
How can I solve this problem? I googled for drivers but cannot find anything.

Answer:Iomega 250GB USB 2.0 Hard Drive

it shows nothing at all in computer? what if you unplug the usb then plug it back in again while windows is running? does anything happen?

and please fill in your system specs it may help if someone else sees this thread

5 more replies
Relevance 67.65%

i recently bought an internal seagate 250gb hard drive and when i installed it it is only finding 232gb i was wondering how i can access the other 18gbs if that is possible. i have seen the 137gb barrier but not something like this. all help would be appreciated.

Answer:250gb hard drive not full 250

its the way that windows reports space compared to the hdd manufactures. the hd manufactures report a meg as 1000 KB, while windows reports it as 1024 KB. no over a large amount of storage (say 80gb) the number will shrink, but the space is still there (will be reported as 74.5GB in windows). so what you have is normal.

2 more replies
Relevance 67.65%

I attempted to add a 250 GB hard drive to my PC, 3.0 Ghz, GA-8S648FX MB with 1 Gig DDR Ram. When I boot my PC and go into the bios, it sees the PC, however when the PC boots it doesn't show it in control panel or in "My Computer". I am running Windows XP Pro 2nd Edition and am frustrated. I have the most current bios for my motherboard and Gigabyte says it should be no problem on their end. So what am I doing wrong? I have tried both setting drives as Cable Select and also Master/Slave. I have tried setting it up with the original Windows XP Pro disk but it only sees 137MB. Any ideas? I got a real good deal so I bought 2 of these 250 GB drives for my PCs, too bad they can't see the. BTW, both PCs are the same motherboard only difference is that one of the PCs is a 2.8 Ghz CPU (INTEL). Thanks

Answer:PC won't format 250GB hard drive

Try going to the drive manufacturers website and download their tools and use this to format. There is an issue with drives above 137mb but I thought this was solved with XP.

4 more replies
Relevance 67.65%

Hi all, hopefully someone can help?Approx 2 years ago i bought a Medion portable hard drive from my local Aldi. Everything has been fine until today when the connection seems loose. If i connect the hard drive to the cable and plug it into my laptop the hard drive turns on, but the laptop doesn't recognise it, and says its malfunctioned.How do i go about fixing it if at all, and have i lost everything on my portable hard drive.Many thanks,Chris

Answer:Medion 250gb Hard Drive

You could probably disconnect the drive and use it in another external caddy.Before buying another caddy you need to know whether the drive is a SATA or PATA (IDE) probably a SATA if only two years old.

4 more replies
Relevance 67.65%

Hello guys.. newbie here.. just want to seek help regarding HARD Drive replacement , for some reason my laptop wont boot upit only does lights (LED) but will not continue to boot or show the logo/ BIOS so we suspected probably HArdisk problem - in that sense we decided just to BUY a new hard drive and replace the existing 160GB with a 250GB.. Now im not sure if this is compatible enough with the MoBO..and the bios..MODEL : LENOVO 3000 G430 just bought it 4months ago here in Hong Kong.. Advice & tips is appreciated. http://www.vatgia.com/pictures_fullsize/tut1254386189.jpg

Answer:is it ok to put a 250GB Hard drive replacement?

You probably can't update the bios in the machine's current condition and if it's only 4 months old that's probaly unwarranted.Check the size to make sure it slot 1, 2 or 3 ( Different thickness) and bring the old HD with you to the store.Also check to see if the HD is IDE, SATA or PATA. It should say on the HD. If not then check out the spec sheets for your machine. Didn't save them? Try doing a search on here. Good luck with that though, I've seen rubber duckies drown with the level of support that Lenovo offers.Ensure that you have the recovery disks or make them any way you can.Good luck to ya bro.

1 more replies
Relevance 67.65%

Hello, We have a customer who has an R40 that we replaced the drive with at their request for more drive space. The biggest drive we could go with was a 250GB drive. Since we installed the drive, the R40 has found it way back to the shop a couple times for a bad hard drive. We use only NEW drives. The drives have been WD 250 ide notebook drives. The original drive was a 40GB in size. In talking with a colleague form another shop, he suggested that the power supply and battery could play some role in this problem. The laptop battery does not hold a charge. The OS is XP Pro with SP2, the computer does see the entire 250GB when installed, this is seen in My Computer and in the BIOS. Can anyone give a suggestion as to what might be causing the larger drives to not last in the R40. The R40 isa Type 2723-LU2. I would appreciate any advice in troubleshooting this. It could be time for her to move to a new laptop. Thanks, Peter

Answer:R40 on it's third 250GB hard drive in four months

well i don't think the R40 has the shock protection system that came in the later T and R series. This means if the laptop experience constant shocks of some magnitude, this may cause faults to develop in the larger hdd, as the fault tolerance level of these new drives are slightly less than the smaller capacity drives. Usually bad sectors or other mechanical faults may develop, if the the drive head routinely crashes into the platter.   

3 more replies
Relevance 67.24%

Ok, I just built my own custom computer with a little from my friends. And we got it all running and working now, however Windows XP Pro is only detecting the 250GB as 130GB, and this is even when we "formated," and partitioned with Windows XP Pro.

Its not the Hard drive, because we built 2 of the exact same (1 for me and 1 for my bro) however its happening on both machines.

Any help, without wipping the currect data on them? (We've already transfered the data from our laptops to the new computers with our 5pc network)

Answer:250GB Hard Drive detected as 130GB?

What kind of hard drives are these? There might be a Bios limitation you need to overcome.

25 more replies
Relevance 67.24%

Hello, I've recently done a clean install of Windows 7 Ultimate and one of my harddrives is not showing up correctly. The harddrive itself is my Local Disk D, it hasn't got any system files on it however it is displaying at the wrong size:

The problem lies in the fact that on boot my Computer's BIOS detects the harddrive as a 233GB harddrive. This is not a problem as I understand that the harddrive itself isn't the exact size as what it says on the box, however the Windows 7 installation and Windows itself only detects the harddrive as being 148gb.

What I've Tried Doing:
I've tried different things to resolve this issue. I've looked at the Disk Management, but there are no extra partitions and I've also looked at the harddrive in Partition Manager which again only picked up 149gb and no unallocated space.
I've run a partition recovery tool in Partition Manager which did not detect any lost partitions containing the rest of the harddrive.
My System:


Code:

------------------
System Information
------------------
Time of this report: 10/18/2010, 18:30:10
Machine name: SAM-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 09/23/03 17:35:41 Ver: 08.00.09
Processor: AMD Opteron(tm) Processor 146, ~2.0GHz
Memory: 2046MB RAM
Available OS Memory: 2046MB RAM
Page File: 890MB used, 3202MB ... Read more

Answer:IDE Maxtor 250gb Hard drive Problem.

Hello samboyd93. Welcome to the forum.

The only thing I can think of is that the drive is set as a SATA2 drive on an older computer that only does SATA1 (please fill in your "My System Specs" to help avoid these kinds of guesses) although I doubt it.

If you look at the back of the HDD there are jumper pins. Setting a jumper sets the SATA speed on most drives. You may need to consult the HDD's documentation to see what the different jumper positions do. Every manufacturer has a different setup.

I would try setting the drive as SATA1 to test. But both drives should be at the same setting. Also try plugging the problem drive into a different port or using a different SATA cable. Can't hurt, might help.

You should also go into your BIOS and check the settings for that drive and compare them to the settings for the other drive. They should be the same.

Hope that helps.

9 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

2 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

5 more replies
Relevance 67.24%

Ok guys the story so far i have recieve my new 250GB hard drive my bios recognises it as a primary and a slaveall ok so far, XP doesnt recognise it in my computer settings but does if you go to control panel system then device manager any ideas below previous postingP.s. how do you turn below in to the words CLICK HEREclick here

Answer:Hard Drive + Cables 250Gb Continued

You need to go to right click on My Computer and choose 'Manage' then Disk management.You will see the drive in the list. Right click on the left hand box and choose 'initialize'. When this is done right click on the right hand side and choose 'New partition'. When you have done this right click again and choose 'Format'

10 more replies
Relevance 67.24%

I think this must be fairly new but I cannot find any info or specification on HP website or with a search on Google. I particularly want to know if its file system is NTFS or FAT32 as my PC is Widows XP with NTFS. Maplin are the only people I have seen who have it on the shelf -not even Amazon have it as they still push the ?previous? 250GB model from HP.

Answer:HP ELEMENTS 250GB External Hard Drive

Cancel this thread as data now found.

1 more replies
Relevance 67.24%

Good Morning:I have Xp on one drive (120Gb) and Vista on another drive (200Gb) although I could move that one to another 120Gb drive.I also have a 250Gb Western Digital USB2 external drive which I would like to partition to make it a back-up for the two operating systems.Can anyone point me to an easy (and cheap) program to do that. And, will it be a problem to copy across since the 200Gb only contains about 110Gb currently?Thanks in advance!

Answer:Partitioning 250Gb external hard drive

click here|623991677&gclid=CP38iLSsh4cCFTeEEAodQ2pAZA

9 more replies
Relevance 67.24%

Greetings,
I have been helping neighbour with their Lenovo-b50-80. It originally came with Windows 8.1 and I have upgraded it to Windows 10 and after a few hiccups is working perfectly.
The next stage of upgrading this laptop is to clone the 500GB original drive to a 250GB Samsung SSD using Aomei Backupper Standard 3.2 and Aomei Partition Assistant 6.0

When I go to Disk Management I find that the disk has 6 partitions. Most of which are probably linked to recovering the OS back to Win 8.1
I would like to get rid of all unessential disk space and so I thought I would ask for your suggestions.
At this moment all the files including Windows.old are located on the C: drive.
Many thanks,
s.


 

Answer:Resizing Hard-drive To Clone To 250gb Ssd

So I found https://support.lenovo.com/gb/en/documents/ht077144. Towards the end of the page is this image;




Which is 2 partitions short of the Lenovo in #1. The 2 missing 1. Lenovo D: drive NTFS partition and 2. 1000MB partition.
Maybe I should keep them all...
s.
 

13 more replies
Relevance 67.24%

I bought a Seagate hybrid hard drive listed at 250GB. when I look at the disk using Acronis disk Director it show the disk size as 110GB. I know the actual size is usually smaller than the listed size but more than 50% smaller? Seems bogus to me.
 

Answer:250GB hard drive only shows 110GB

16 more replies
Relevance 67.24%

Hi all,

A friend of mine is having problems with a 250GB Seagate Hard drive.

It was bought from a computer shop and they fitted it for him. When he took it home the computer didnít recognise it. It then recognised it as 250gb, but his Windows OS wouldnít work properly (it would some times work and other times wouldnít).

He had the drive refreshed, re-formatted and had the partitions removed and rebuilt. Its then that 130GB disappeared.

Does anyone know what may have caused this (sorry I havenít given much info, but this is all I know) and if so, whether itís fixable. I have suggested that the drive be taken back to the shop that it was bought from, under warranty.

If you need any more info, please ask, and I will try and find out.

Any help would be appreciated.

Thanks in advance.
 

Answer:250GB Hard drive only shows 120GB.

7 more replies
Relevance 67.24%

Hi there, I've got a 250gb maxtor HD and it can't be detected in bios or something is wrong. WHENEVER its connected (either on its own or with another drive), it says "error loading OS".
(PC boots fine with my other Maxtor 120gb HD)

On some sites it says to set Bios HD Access to LARGE instead of auto/lba etc

BUT - my bios doesnt show me such a setting when i go into HD config screen. I know what screen it should be on, but believe me, there is no "large" option for HD access.

Motherboard = MSI MS-6567


Can someone pls help me?? Thanks so much

Dom
 

Answer:BIOS won't recognise 250gb Hard Drive

Well, error loading OS only shows that it can't load an OS. Do you have an OS on that drive?
At bootup, your BIOS should list the drives it detects. Do you see the Maxtor in the list (next to the optical drive)?

That's a rather old motherboard. It could be that it simply does not support hard drives larger than ~130GB. And I can't see a BIOS update that would fix it either.. You can try updating to the latest BIOS and hope that it fixes the problem of course.
 

4 more replies
Relevance 67.24%

I have recently fitted a Hitachi Deskstar 250gb Hard drive(model:HDS722525VLAT80) to my computer.

After Re-instaling windows (xp) the drive was showing as 125gb.

I have been told this is because windows xp will only support 125gb without service pack 2.

I have now downloaded SP2. but it still shows as 125gb.

Any ideas what I can do to fix this????????????
 

Answer:250gb Hard drive shows as 125gb

When you partitioned and formatted the drive, it didn't have any service packs, so it limited the format to what you see. If you go into Disk Management, you'll find that you now have about half the drive listed as "Unallocated". You can create a partition on this section and format it, then it will be available for use as a new drive letter.
 

1 more replies
Relevance 66.42%

Hi there,

My Sister owns a ASUS laptop running Windows Vista and has a portable hard drive (WD 250GB) which she uses to back up her files and to store her business files and personal files (music, photos, videos etc.) however, i plugged it into my MacBook to transfer files onto it. Now when i try to plug it back into her Asus, it doesn't recognise it and when "Computer" is opened the hard drive is displayed as "Local Disk (G". I am able to double click the text, but a window pops up saying "You need to format the disk in drive G: before you can use it." But i do not want to format the hard drive because the files on it aren't backed up. I've tried plugging it back into my MacBook, but that doesn't recognise it either.

Any help would be fantastic!

Thanks
 

Answer:WD 250GB Portable Hard Drive requesting format

you may need to rename it as for example in her comp that may have been E drive and in mac F drive so drives have gotten mixed up
try vista disc management if you can see it there change drive letter, or try in safe mode, ie connect drive with comp off then re boot into safe mode
 

1 more replies
Relevance 66.42%

I'm trying to upgrade from the 30GB Toshiba harddrive that came with the unit to a Western Digital Scorpio Blue 250GB EIDE drive.
I take the swap the 30GB out for the 250GB put in a bootable version of XP SP3 CD-ROM and nothing - no sign that any power is getting to the drive.
The CDROM tries to write boot files to the hard drive but nothing happens.

Same thing happens when I try to use the 3cd pack from Toshiba or the recovery CD from Norton Ghost.
The computer is not seeing the drive. Put the old 30GB drive in and it boots up right away.

My BIOS settings show it to be set up for EIDE and to boot from the CDROM. What steps am I missing?

Answer:Satellite 2410 wont see new 250GB hard drive

Hi

It looks like the BIOS does not recognize the new HDD? I assume it?s too large?
The Satellite 2410 series is old and I assume it will not support bigger HDD?s than 120GB due to the 28bit LBA

So try with smaller HDD like 80GB or 100GB.

Greetings

2 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

1 more replies
Relevance 66.42%

Ive been reading around and noticed that problems like this are fairly common. Im having troubles finding something that applies to me. I have a Dell Dimensin 8100 P4 1.4 GHZ, its sorta old i guess, it was a relatively new P4 computer i think. I just bought a Hitachi GSX 250GB ATA-100 IDE 8MB Buffer hard drive and havent been able to get it to be recognized at more than 127GB. I tried updating my BIOS (went from Revision A02 to AO9) but that didnt make any difference on the drive. DO i have to wipe the drive and start over with the blank drive or what? I also read that XP Home needs SP1 to recognized more than 127GB so i downloaded SP2 and it didnt make a difference. If anyone can clear up why this isnt working thatd be great.Thanks Alot
Brian
 

Answer:Solved: 250GB Hard Drive Only Showing as 127GB

12 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

3 more replies
Relevance 66.42%

Hi,

I'd like to upgrade my current HD to the Seagate 250GB Internal Ultra ATA Hard Drive. My computer is 7 years old this June, so I'm curious about whether it's compatible or not. My current HD's specs are located here: http://support.mpccorp.com/apps/specs.asp?ID=1971

Specifically: Embedded Controller Interface: (40 pin) EIDE
Physical Dimensions (H x W x D): 1" x 5.78" x 4"

I have the most recent BIOS update for my computer which was released in 2002. I run XP SP2, PIII 735 MHz, 256 Megs RAM. Do you think this upgrade would work or would I just need to toss the idea and get a new computer?

Also, the HD's specs are located here: http://www.bestbuy.com/site/olspage.jsp?skuId=8004679&type=product&id=1155848396138

Thanks so much,
James
 

Answer:Seagate 250GB Internal Ultra ATA Hard Drive

The 7200 hard drive wil give better data transfer, but on your system, p111, 735mhz, increasing your ram would help, I would say, more.
XP runs better with more memory.
Upgrading to a later cpu, and motherboard, would give your old pc, a new lease of life.
 

20 more replies
Relevance 66.42%

Hi, Im new to the forums.

Im having problems with my external harddrive i backed up all my data so i could sort out my virus problem which i used the removal of viruses guide on this site. After, my computer was "cleaned" i plugged in my harddrive and and it was recongnized by Vista but when i try to move all my data back to where it belongs it wont move back. Could this be a virus problem or is my system in need off a proper virus "hunt" and a good virus "clean". i can access the files they just wont go on my computer

Thanks,

Sam

Could it be my hard drive infected with a virus is so tell me how to remove it

Answer:WD 250GB hard drive wont move my files

What happens when you try to transfer files? Do you get an error message? You'll need to be more specific than 'it doesn't work'

3 more replies
Relevance 66.42%

Hello all. I'm hoping someone can help me. I have a 250gb maxtor hard drive. I have just purchased my second external case off of ebay and it does not work!!

The first one was no name brand, it says "Awesome" on the case and has lights that light up around the case. It said on the web it supports up to 250gb, and on the auction. When I plug it in, it recognizes it and I can view an play files off of it for maybe 5 minutes then it says "USB device not recognized" and gives errors like "this usb device can run faster on USB 2.0" which it is in a 2.0 port. Funny thing is right when I got it, it worked for a few hours, it kept working pretty well at first for maybe a week, then it just stops working after a few minutes.

So I purchased another one on ebay, another non name brand, it said it supports up to 250 gb, and this one it recognizes it for a few seconds and then it is suddently not on my computer at all. I have checked the device manager under both of these items and for drivers, etc. Everything seems to be working fine. I even downloaded a file that helps your computer recognize high disk space, although I was told on XP I don't have to do that. So what do you all think?? Is it just the cheap external case?? I have a Dell Inspirion 1100 with a celeron processor, purchased 1.5 years ago. I have tried the case on other computers that were better than mine, I have tried the hard drive straight into a computer and it works fine. I have the... Read more

Answer:Need help with getting 250gb hard drive in external case to work.

mmm... i had a problem like that with a flash drive. it worked for a couple of months, and then it just randomly disapperaed, and when i plug it in, it is not recognised anywhere atall on the system where it should be listed. i have never been able to solve that one.

2 more replies
Relevance 65.6%

I'd like to get a 250GB SSD in my T450s when I order it, but Lenovo is charging $280 for the upgrade. So I'm thinking to order a T450s with a conventional 500GB spinning hard drive and buy a Crucial 256GB SSD elsewhere for $105. I would save $175 plus have a 500GB hard drive which I could erase and format and put into an external enclosure and use for other stuff. My question is -- I'm going to order the T450s with the Windows 7 Professional installation, so can I easily swap out the 500GB hard drive for the Crucial 256GB SSD (I'm ordering from elsewhere), and reinstall/recover Windows 7 Pro from recovery discs? I'm assuming that recovery discs are included or can be downloaded. Or, could I restore to the Crucial 256GB SSD from the recovery partition on the 500GB hard drive? How would I do this? 

Answer:Order T450s with 500GB hard drive, upgrade to 250GB SSD

Download and install Macrium Reflect.  There's a free version that makes clones.  Clone the factory drive to the SSD, then swap it out.  You don't get recovery disks.   The recovery software, though, has the option of creating a recovery disk set from the recovery partition that is installed on the drive.  So, you could burn the disks and put them away as your recovery solution.  When you clone the factory drive, you have the option of selecting which partions to include on the cloned drive.  If you've burned the disks first, you can simply not select the recovery partition (which is typically lettered "Q") and just clone the system reserved and Windows partitions and save yourself the disk space on the SSD. Once you've got it set up to your satisfaction, and you have the disks, then format the factory drive to use for your other purposes. 

9 more replies
Relevance 65.6%

This is not a repeat! It's just that I read somewhere about one needs to make sure that it is formatted to NTFS. My Windows XP Sp2 is formatted to NTFS so will this present no problem when I come to use the drive?

Answer:Maplins 250GB Western Digital External Hard Drive

No roblem.Used one for two years.

5 more replies
Relevance 65.6%

I'm running Windows 7 Pro and the only option I see when I right click on the drives are NTFS or exFAT.

Hopefully it will be something easy because I'm not at all handy with the command prompt, unless someone walks me thru it.
 

Answer:Need to format a 160gb & 250gb external USB hard drive to FAT32?

have a read ta this,maybe helpful... http://uk.wrs.yahoo.com/_ylt=A03uv8...54/**http://www.neurostechnology.com/node/407
 

2 more replies
Relevance 65.6%

Maplins list this as 'New'. Price is £69.99 inc vat ex store. Has anyone got/know of this drive and if so what are their opinions.

Answer:Maplins 250GB Western Digital External Hard Drive

Ordered one from Amazon £11 cheaper, delivery due tomorrow.

2 more replies
Relevance 65.19%

I just purchased a 200GB Hitachi Deskstar 7K250 hardrive that I intend to use as an external backup drive for my laptop. After plugging it in, my laptop regognized the hardrive and said that it was ready to use, but it did not show up in Windows Explorer. So, I went to Computer Management thru Properties/ My Computer, and it shows my original drive as Disk O (55.89 GB), and this new drive as DIsk 1 (128.00 GB).

When I try to create a new partition so that I can format and start using the drive, it only allows a maximum of 131.069 GB space!

How do I solve this? Do I need to upgrade the BIOS or something else?

I am running Windows XP Professional SP1 on a Toshiba Satellite P4, 1GB RAM, 2.8Mhz.

Thank you for your help!
 

Answer:200GB drive seen as 131GB only!!??

16 more replies
Relevance 64.78%

I am trying to install an hitachi hard drive into dell 4600 my bios auto detects but when I go into my computer in windows xp the drive doesn't show up... Can any one help me???
 

Answer:Solved: Installing Hitchi 250gb hard drive in dell 4600

8 more replies
Relevance 64.78%

This hard drive originally was in my brother's computer. He had XP installed, went to install Windows 7 and after the first reboot, it would just hang on the bios screen.

I played with the jumper settings and such, nothin'. Put it in a few other computers, nothin'.

I was just curious, is it something that can be fixed or should I lay it on my desk to hold down some papers?
 

Answer:Seagate Barracuda 7200 250GB Hard Drive - Stopped working

8 more replies
Relevance 64.37%

Have 200 GB ext Maxtor 7200 RPM... WinXP Home...

Question...

Do I need to format and partition the 200GB HD? The only instructions that came was warranty and good luck with yur drive. I'm going to use this drive
to store music.

Thanks for your help.
 

Answer:Solved: 200GB drive seen as 131GB only!!??

I've split your post off into a new thread. We don't revive dead threads to solve new problems.

As far as your problem, yes, right click My Computer, Manage, Disk Management, you can partition and format the drive there.
 

3 more replies
Relevance 64.37%

Does anyone know how many milliamps this device draws?

The "Technical Specification" provides plenty of info but does not specify the actual current. All it says is that it is powered directly from the USB port. But I need to know exactly what the peak ma of this device is.

TiA

T
 

Answer:Western Digital My Passport Essential 250GB USB 2.0 Portable External Hard Drive

15 more replies
Relevance 64.37%

The Acer C: drive is now full and the Data D: drive is empty, but it is not recognizing it automatically. This computer is my brother's, he bought it new and has it at my house. It came formatted with no disc's and I'm not sure where his books for it are. Can anyone tell me how to activate the second hard drive so I can use itunes and download video, etc.

It would be very much appreciated. My brother uses the computer here but it has been here for at least 3 years maybe and the book is misplaced. He mostly uses it for youtube, facebook, and stuff like that and is less computer educated than I am at tech stuff, which isn't saying much.

Thanks in advance for any help.
 

Answer:Aspire AST690-UP925A 250GB SATA hard disk first drive full and won't go to 2nd

Boot into Bios, usually by hitting F8 as soon as the POST screen appears and see if the hard drives are both recognised. If the spare drive does not show in the Bios it either has a fault or it is not correctly connected.

What OS is on the PC.
 

7 more replies
Relevance 64.37%

Hi I'm Mark. I'm having a problem when it comes with my notebook [dell inspiron 600m] and my external hard disk [WD Elements 250gb]. when I connected the 5 pin cable of the external hard disk to the usb port of the notebook, the connection is seem to unstable or on-and-off, therefore making file copying impossible. The external hard drive and the notebook is in good condition, although I can't really figure out what seems to be the problem. I am also having a theory that this might be a power supply problem. I would be very grateful to someone who can help me about this matter..
 

More replies
Relevance 59.86%

Hello guys,

My client has 250gb harddisk & it has only 1 drive & there is lot of data i.e about 20gb in it.

PLZ tell me any software which can reduce size of c drive & create new drives without causing loss to windows & without loss of data,

I also need pdf to word converter.I have download many softwares but no one is perfect.Plz tell me that software.

I will be very thankful for your reply

Regards

Answer:windows 7 c drive is 250gb.How to make new partition

To reduce the size of the system partition in order to create a new, second partition, there are several third-party solutions for doing that, two of which are:

Free> EaseUS Partition Master: Free Partition Magic alternative. Best Free Partition Manager Freeware for Windows 2000/XP/Vista/7/8 32 bit & 64 bit - EaseUS Partition Master Home Edition.

Not free > Paragon Partition Manager: Paragon Partition Manager Personal - Overview

As regards a PDF > Word converter, I don't think a perfect one exists. Besides, we don't know which ones you've already tried.

1 more replies
Relevance 59.04%

We removed old disks from my reliable but sluggish Dell Pentium 4 and installed a new Hitachi 250GB drive. Windows XP installed fine, but the system will not reboot after we install SP2. Tried twice, rolling back to the previous configuration.

Tried installing SP1 (fine) and several critical updates THEN SP2, but same problem; after the "successful" install the system must be restarted, but now it will not boot. Instead we see the message saying Windows cannot start, and giving options for booting in safe mode (this works), booting in safe mode with networking (does NOT work). We have tried F8 at startup & tried Debug mode, but this just took us back the same menu (Safe, Safe w/networking, Last known good, etc.).

We have already checked for BIOS updates, and found none available.

Any ideas?
Thanks
 

Answer:Installing Windows XP on new Hitachi 250GB drive, won't reboot after SP2

Update on this problem: with the restart on failure disabled we were able to proceed a bit further, and have now disabled our AVG virus s/w, and rolled back again to run a disk check... before trying SP2 again.
 

1 more replies
Relevance 56.58%

I've been getting this "Windows - Delayed Write Failed" error for quite some time. It's strange though, because it seems to be happening totally randomly.

Here's what happens:

I could be using firefox 2 mins after I start up my computer or be playing a game 4 hours after I start my computer and then a delayed write failed error (or several) suddenly appears from the taskbar in the lower right corner of the screen, failing to write either a system file of some sort or a file related to whatever program I happen to be using at the time. Then everything becomes extremely choppy and eventually totally freezes up. I then have to manually restart at which point it will either work normally or be slow and then freeze up during startup. For some reason, moving my HDs to different SATA ports (since my mobo has 4 ports) tends to fix the problem for a while before it starts happening again.

Does anyone happen to have any idea how to resolve this problem or what is causing it? Is my HD failing, does it have to do with my drivers/firmware/bios, or is it some sort of software bug or conflict?

Any help would be greatly appreciated!
Thanks!

(btw there don't seem to be any problems with the disk when I check it with chkdsk or the seagate disk checking utility)
Specs:

Seagate Barracuda 250GB 7200 RPM SATA (Two of them, not in raid)
Windows XP home edition SP2
Intel BOXD975XBX2KR LGA 775 Intel 975X ATX Intel Motherboard
Intel Core 2 Duo E6600 Conroe 2.4GHz ... Read more

Answer:Windows - Delayed Write Failed error with 250GB SATA internal Seagate drive

Ooh, my task bar and desktop just disappeared and I just got a message saying:

Windows - System Error
Unknown Hard Error

And when I clicked OK, it just reappeared. When I tried to shut down, my computer locked up, so I had to shut down manually.

Restarting failed, but my computer seems to be working again now that I have switched the HDs to different SATA ports again. For now...

This can't be good...
 

1 more replies
Relevance 53.71%

What can I do with 20 250 gb internal hard drives? What would I need to buy to turn them into a server? Any other ideas besides ebay?
 

Answer:I have 20 250gb internal hard drives. What can I do with them?

You can set them up for Raid, using all the Sata (assuming Sata HDD) connections onboard.
But you will likely only use 4 Max

The other 16, can be put into external cases (for USB)
 

8 more replies
Relevance 52.89%

i bought transcend 250gb external hard disk 9 month ago and it was working properly till this june month but after that it is not working ,the led light is also not blinking . but from few days it comes for 1 minute and then again goes off

Answer:transcend 250gb hard disk led is not blinking

Hi XAXA,From a troubleshooting perspective there's a handful of things to consider. We should start from the ground-up. Let's consider the following:- Is the device receiving electricity? (If you plug something else in that same socket, does it turn on?) <check this one when your hard disk is NOT working>---- If the answer is yes you may have a fault in the electrical wiring to the device.- Does the device have a toggle or similar switch to turn on? If it is fouled you may not be making a good electrical connection. <play with the switch; does it flicker or give you unpredictable results?)---- If the answer is yes you may have a faulty switch (or button, etc.)- Does the device make (excessive) noise when it is turned on?---- If a lot of noise, or a scraping or grinding sound, you have a physical issue with your hard drive. A protectionary measure may be the auto-off feature which you could be seeing.- Is the device plugged into your computer? (We want a good connection)---- If no, you should plug it into the proper port-type (such as a USB?)---- If yes, please ensure you're plugging it into the proper port-type (if not the proper port-type you could be causing an electrical short; check the device's documentation)In any event, if none of the above helps you may do best by checking the owner's manual or searching for one on the Internet (usually available for free in .PDF form.) You could also take it back to where you bought it and have them take a look at it. In ... Read more

3 more replies
Relevance 52.48%

Hello, I'm hoping I can find a solution to my problem here as I couldn't find one elsewhere on the net.
I have a laptop and currently have a 120GB hard drive in an external enclosure. I have just bought a new 250GB hard drive and have installed it in the external enclosure. Though partitioning and formating the 120GB was a breeze, I've had nothing but problems with the new 250GB.
Below are the specs of what I'm working with. In both Partion Magic and in the Win2000 Disk Management, it correctly displays the 250GB drive (233GB). Regardless of which program I use (ie. Partion Magic, Win Disk Management, command line FORMAT) I get problems.
Generally, what will happen is it will partition fine. Then it will begin to the formatting process (VERY slowly) and then either throw an error either during or at the end of the process. And this is when I try to format a very small partition (ie. 100MB). I have successfully formated a 10MB partition. On a large partition (ie. 30GB) the format process will start but will not progress.
The only two things I can think of is that the drive is faulty, or because I am booting my OS from a floppy there is some sort of recognition problem.
I can't run the diagnosis software from Maxtor because that requires the drive to be installed internally.
So any help to this problem will be greatly appreciated.
Additionally, how long should it generally take to format the 250GB drive in its entirety?

Comp: Toshiba Satellite 2805-S201
OS: Win2... Read more

Answer:What's with the 250GB Drive

HHhhhhhmmm...sounds like a bad drive to me. Do you have a desktop computer that you can use to attempt to format the drive??

4 more replies
Relevance 52.48%

Recently bought Athlon64 3200+, Gigabyte K8NF-9 F11, 1GB RAM & 250GB SATA seagate hard disk. The problem here is that the BIOS (Award Modular BIOS v6.00PG) recognizes the harddisk to be only 130GB. Does Gigabyte K8NF-9 supports SATA 250GB hard disk or its's something I've done wrong? Pls help me out here. Thanks.
 

Answer:BIOS can't recognize 250GB SATA hard disk

I had a similar problem, I thought it may apply to you.

When I first installed my XP Pro on my system with a new Seagate 250 GB HDD, XP created the C: drive at 125 GB, basically cutting the disc space in half. The rest was just unformatted.

Go to "disc management", and you might find your missing 120 GB in unformatted space.
 

2 more replies
Relevance 52.48%

Homework question 1. Computer detects the hard disk when connected but cannot send any data to hard disk as it does not show when' send to' is selected

Answer:transcend 250gb hard disk autorun is not working at all

We don't help with homework questions, here. Sorry.... :)

4 more replies
Relevance 52.07%

Hi. I have an external drive Simple Tech, Simple Drive model 96300-41001-011 which i have not used in a while. it should have the drivers built in but when i plug it in it runs but does not appear . Simple Drive does not appear in COmputer. I plug it into my Sony G11VN pc running Vista Business sp2. The usual window pops up “windows needs to install driver software for your Simple Drive” – I click “locate and install driver software” but it does not find it. I have looked for the driver on the site of Simple Tech which is now www.hgst.com but I can’t find it.
Have tried to plug into MacBook which also runs windows with no luck.
Any ideas? Where can I find the driver?

Answer:simpletech simple drive 250gb drive

thanks for reply Jock1e.
no it does not appear in my computer and yes there is a yellow ! in devise manager. i have tried updating driver but it can't find the the driver and have tried disabling/enabling and also uninstall/reinstall. no luck. aslo does not appear in Disk Management

4 more replies
Relevance 52.07%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 52.07%

I run win 98se with 2 drives, a 30gb and an 80gb, both work well, but are full. I bought a 250Gb drive to use as a USB external. To try and format the new drive, I replaced the 80 (D Drive) but the new one is only seen as a 65 GB drive. I've tried fdisk and format, Still 65Gb. Anybody any ideas? as always, thanks in advance for any helpCheers

Answer:250Gb drive and win98se

also, if I want to swop it between 2 machines, one win98se, the other XP, will it need to be fat32?

10 more replies
Relevance 52.07%

Computer info:

HP Vectra
VL420 MT
WinXP Home SP2
LBA on
Intel Pentium 4 CPU 2.00 GHz
HP System board A08
Chipset: Intel i845 Rev: A3
Southbridge: Intel 82801BA (1CH2)
BIOS: American Megatrends, Inc.
Version: JA.01.07US
Graphic Interface Version: AGP version 2.0
Intel(R) 82801BA Bus Master IDE Controller
SD RAM 512 MB
PC133
NTFS
(did I miss anything?)

I appologize in advance for the long read.

This computer came with only a 10GB Seagate drive. It has less than 300MB left of unused memory, so I tried installing a 250GB Maxtor. It is only recognized as 30GB in the BIOS. I don't understand this because I have WinXP SP2 and LBA is enabled in the BIOS -
Not only that, but I have another 300GB Seagate that I want to install as a slave (I had previously installed this one as a slave to the 10GB but had the same problem with only 64GB being recognized.
I don't understand why my BIOS isn't recognizing it at it's full capacity since I have the latest version of BIOS and LBA is indeed enabled (I thought SP2 was supposed to correct this problem).

My hope is that someone out there can walk me through this step by step (from erasing the disk to installation) because I've been working on this thing all day long and nothing I've tried seems to work. The 10GB drive has to go. I want to install the 250GB drive as my master, copy the 10GB drive to it (I have Casper XP 3.0 for this purpose), and then install the 300GB drive ... Read more

Answer:250GB drive is seen only as 30GB

Did the Maxtor not come with a setup disc .....?
When you go to control panel / admin tools / computer management / disc management and right click on the "free" space of that drive what options do you get?
 

21 more replies
Relevance 52.07%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 51.66%

This is the second time this has happend.

It is weird because I didn't download six gigabytes of stuff. I dont understand how 6gb of space was taken up over night? I had a feeling it was hibernation data, or system restore data, but i checked and that was not the case, im just curious on how these large amounts of space keeps getting removed from my harddrive?

Answer:My harddrive had 131gb when i went to bed, now it has 126???

Hi. . .

There could be carious legitimate reasons such as Windows Updates, Windows Side-by-side (\winsxs), page file and as you mentioned the hiberfil.sys.

Download and install TreeSize which will give you a folder-by-folder view of space usage.

Also how did you check system restore? To check VSS (Volume Storage), download the attached zip file, extract to your desktop, right-click on the resulting icon and a Notepad will appear with VSS information. Paster it into your next post.

Regards. . .

jcgriff2

.
ATTACH: http://www.techsupportforum.com/atta...-space-vss.zip

.

1 more replies
Relevance 51.25%

Hey guys, i need some help, i am trying to get my 250GB sata drive to work on a MS-7061 board so i can install Windows Xp, ive tried going into the BIOS but have had no luck, i have a IDE Drive connected as well as somebody said you can configure it with an IDE drive installed, any help is appreciated greatly, Mark
 

Answer:Configuring a 250GB Sata Drive As IDE

8 more replies
Relevance 51.25%

Hi there..I have a 250GB SATA HD drive and trying to load XP on to it...all that happens is that the files load from the XP CD onto the HDD but the menu screen does not appear...I can view the files when logged in from a IDE drive but the whole XP software is not on the SATA drive.I have seen other advice which states I require chipset drivers to load onto my system from floppy drive after pressing F6 for RAID drives present?? The drivers downloaded are 7.5 MB...a bit big to go on a floppy!!Any help please would be much appreciated..The system is an HP xw9300 computer.many thanks in advance.

Answer:Installing XP on 250GB SATA drive

You should have a Floppy Disc with the Raid Driver on It to enable XP to see the drive.Setup will ask If you have a disc for the Raid Driver. Take a look on the CD for Raid Drivers & how to create a Floppy Disc, if not have a look on your Motherboard's website.Regards.

3 more replies
Relevance 51.25%

Erlier i booted my PC up into Xp to see a strange warning box come up. I can't remember what it said now but my mouse and keyboard didn't work.

I then pull the plug and fire it back up into XP again. only it get about 2 bars into the loading screen and a BSOD loads fo about a second and the machine restarts.

I booted into Vista to ask for help, i go into my computer and look a my other HDD it is still there but according to properties have 0 bytes space. I tried error checking it but windows said it could not access the drive.

I really need to get my SATA drive up and running again, if its possible.

Cheers

Alastair
 

Answer:250GB SATA2 Drive Not working! Please Help!

13 more replies
Relevance 51.25%

I use W7 Home Premium and would like to make a backup of my entire system. I will use the image method and the combination of my C and D discs are about 125GB total. It appears to me that this Seagate will do the job, however, I would like some opinions before I purchase it. Thanks

Answer:Seagate 250GB USB External Drive

You can get a 1TB external hd for $75. Why limit yourself. You can store an image of your hd, as well as back it up. Will the 250GB be ok? Yes. But go ahead and get the larger drive.
**GO 82nd - All the way! **

3 more replies
Relevance 51.25%

This may be a total noob question, but honestly I didn't have any idea what I should search for to find out if this is a known problem. Here it is:

Just put my new system together and in the BIOS it recognizes the drive for what it is, 250GB, but when I went to install XP, it saw it as 130GB. Is there a known reason for this or am I stuck using half of my drive? It's an SATA drive, does this have anything to do with it?

system specs:

Athlon 64 X2 3800+
Asus A8n-e
XFX 7800GT
2GB Corsair valueselect
250GB SATA2 WD HDD
 

Answer:XP only sees 130GB of 250GB drive

You need to see about slipstreaming a copy of Service pack 2 into your install CD. That might be a service pack 2 thing.
 

15 more replies
Relevance 51.25%

Hi there

I've recently come into a handful of old 2.5" hard drives from the upgrade of some EPOS systems. Most of the drives work fine, but two of them, both 250gb nominal capacity (a Hitachi HTE543225A7A384, and a TOSHIBA MK2576GSXZ) both show up as 111gb in Windows (7 Ultimate 64-bit).

PassMark DiskCheckup (under the Hidden Areas - HPA/DCO tab) shows that the Max User LBA for these drives is set to about half that of the Max Native LBA and the Max Disk LBA which would explain the discrepancy. However; when I try and use the "Modify HPA/DCO" option to reset the Max User LBA to the Max Native LBA it just comes up with "Error setting new Max User LBA".

Anybody got any ideas or know of a tool that might help?

Slainte

cuckfieldtech
 

Answer:Solved: 250gb 2.5" Hard Disk Drives Show Up as 111gb...

13 more replies
Relevance 50.84%

I think I know the answer to this one, but as the Dell knowledge base/tech support site does not appear to be working today (can search but can't download) I hope someone here may be able confirm my theory.

Yesterday I installed a brand new 160GB Hitachi Deskstar PATA HDD into a Dell Dimension 2400 and loaded XP Pro but the XP installation only recognised 131GB. I assume that this must be a limitation of the motherboard and/or BIOS but as the Dell site is not responding I can't check. The BIOS is the latest version available from Dell.

I didn't really need a 160GB HDD (60 or 80GB would have been more than adequate) but that was the smallest size the store had available and the price difference was negligible. Although even 131GB is more than I need, I would still like to know if it's possible to utilise the missing space, even if the drive has to be partitioned.

Any thoughts or suggestions?

Thanks and a Happy New Year

GarryD
London, England

Dell Dimension 2400
Celeron 2.4 Ghz
512MB RAM
Hitachi Deskstar PATA 160GB 7200rpm
XP Pro SP2
Dell Dimension 2400 m/b
Dell 82845 G/GL/GV Brookdale chipset
BIOS A05
 

Answer:160GB HDD shows as 131GB

16 more replies
Relevance 50.84%

This is the second time this has happend.

It is weird because I didn't download six gigabytes of stuff. I dont understand how 6gb of space was taken up over night? I had a feeling it was hibernation data, or system restore data, but i checked and that was not the case, im just curious on how these large amounts of space keeps getting removed from my harddrive?
 

Answer:Harddrive had 131gb when i went to bed,now has126???

11 more replies
Relevance 50.84%

I have a 250gb hd in my uncles computer and I put sp2 on it because I thought it had the update I needed for xp to see the full size but it still doesn't. Is there something else I'm suppose to do?

Answer:250gb drive still showing up as 127gb after sp2 update on xp

Whoa, what?

9 more replies
Relevance 50.84%

pls. help. my dell dimension 8200 desktop is not detecting i/o magic 250gb external drive. i plug it in to the USB and nothing happens. the device is on, my USB is working with other devices. but when i plug in the external drive nothing happens.

i've tried to get help from the manufacturer but everything that they've told me to do is not working.
- downloaded the drivers and still nothing.

i'm in dire need of assistance.
 

Answer:i/o magic 250gb external drive - not being detected

You may want to check the drive on another computer because it should just be plug and play.

I guess there's a chance the drive is not partitioned or formated, If you you go to Disk Management does it show the drive? How about in Device Manager, is it listed there or are there any errors showing?

http://www.theeldergeek.com/disk_management.htm
 

3 more replies
Relevance 50.84%

My laptop Dell Latitude D830 running XP Pro does not recognize the external Seagate 250 gb drive, even under device Manager. I?ve tried it under Slave, Master and Cable-Select Option but with no success. Any ideas? Periodically I hear from the disk a click about one second apart. Probably it?s gone bad, so if it has crashed, how can I recover data on it? How can I get XP recognize it?

Answer:XP Pro doesn't recognize external SG 250gb drive

Have you tried connecting the drive to another PC?

4 more replies
Relevance 50.84%

:hyper

My sons got me a Samsung 840 EVO SSD for my birthday . . . and it ROCKS! (That's right . . . I be the Dad . . . :major). Never used an SSD before and been wanting to try one out but I couldn't justify the expense at this time.

I was able to clone my existing HDD to the SSD with no trouble. The speed of this thing is amazing all by itself, but Samsung has a RAPID (Real-time Accelerated Processing of I/O Data) setting in its provided software that allows the use of up to one gigabyte of system RAM to use as a high-speed cache. This seems to more than double the sequential read and write of the SSD. I'm astonished! So far, so good.

On to my question . . . I've been putting various OS folders on my old HDD (all the Library files; Documents, Videos, Pictures, Downloads, etc.) but I was wondering if anyone could suggest any other files that would be wise to move from the SSD to my regular platter drive? I've researched this issue, and there is so much contradictory information out there I'm not sure how to proceed . . . so I came home to MG to ask

Thanks
 

Answer:Samsung 840 EVO 250GB Solid State Drive

I think I answered at least one of my own questions - It's apparently not wise to move the AppData folder to another drive besides the OS drive. I can't really think of any other caches or folders that would make sense to move.

I've moved I.E. temp files, all my document Libraries, and put a good few of my most used utility programs on my HDD. This seems to be taking some of the pressure off the SDD. I've had it installed and running since May 27th and have only written .17 TB to it. I intend to keep the games I am currently playing on the SSD. Though, from the testing I've seen done on this drive, longevity doesn't seem to be an issue with this model.

Ran another performance test on the drive after a reboot, and the Random Write (IOPS) results are insane! Top is the SSD of course, and I ran a comparison test on the 500GB Seagate Barracuda drive that had been my OS drive. SSD FTW!
 

24 more replies
Relevance 50.84%

I have just bought this external drive and am trying to download the driver onto my laptop from the WD website, as I am running Windows 98SE. I have found the WD Essentials USB 2.0 driver and when I click the DOWNLOAD button a small screen appears with a blue line across the top and the words "File Download". However this box just flashes on and off all the time and locks up the computer. The only way to get rid of it is to switch the power off. I have enabled pop-ups as requested, and have also disabled Norton Antivirus 2005. I have no firewall. I have tried a number of times without success. Can you please help? Many thanks.

Answer:Western Digital USB 2.0 250GB external drive

I have just downloaded it without problems, aristo, if you wish I can email it to you, it's a 2MB zip file.

2 more replies
Relevance 50.84%

Certain simple activities (like opening certain documents) generate "not enough disk space" announcements. I want to move as much as possible to the D:\ drive, but I realize I can't simply drag and drop programs. I've made a backup of the system. I could start deleting things from the C, but I don't want to do something I'd be sorry for later. I need the steady hand of someone who knows their way around in this situation who can say, "do this, then do that." My iDrive backup subscription ran out in January and I can't afford to re-up just now. I think if I deleted the iDrive files from C:\ the SSD wouldn't be so full. I wondered if I could make an image with my other free backup software and save it to the other drive, then clear off a lot from the C:\ drive, then after that, selectively install to the cleaned up C:\? Any simpler, better comments and suggestions welcome.
 

More replies
Relevance 50.43%

Hey guys, kinda new here, hopefully I'm posting this in the right forum section.
I'm not that super oriented with computers, I'll give it my best shot to explain what's going on here.
In short my PC just won't start. The light turns on, it boots up, and then I get a black screen with text referring to either "Start Up Repair (recommended)"
or
"Start windows normally"
If I choose start windows normally, it brings me to the black booting screen with the windows flag, then it proceeds to go back and restart the system, going back to the black screen. OR More likely it just stays stuck on the glowing windows flag.
This also occurs if I press F8 and go into safe mode. After listing all the components before going into safe mode, it simply restarts itself and goes right back to the black screen of the two choices.
If I select Start up repair, a grey loading bar appears below that on occasion freezes. If I manually reset the computer try it again, I get to a blue windows default background screen and the message
"Startup Repair
Your computer was unable to start
Startup repair is checking your system for problems...
If problems are found, Startup Repair will fix them automatically. Your computer might restart several times during this process.
No changes will be made to your personal files or information. This might take several minutes.
Searching for problems.. (this is beneath a blue bar that has been going on for at least an hour)
There's also a Dos window... Read more

Answer:Windows 7 won't boot past possible broken Hard drive attempting to recover/clone/copy hard drive

It sounds to me as if your Operating System has been damaged beyond repair, and that you only option would be to re-install your system using the 'Return to Factory Settings' facility provided. Unfortunately, this would mean you would lose all you data, and, from what I can tell from your posting, you have not taken a back-up so you cannot repair your PC at present.
You first need to remove your heard drive and connect it to a working PC either as slave or in a caddy, and use this to copy all your data onto a new external device.
OR
Once connected to another device, you could partition your Hard drive and copy your data into a second partition.
Once you have your data copied, return the HHD to your own PC and re-install your system from scratch.

10 more replies
Relevance 50.43%

Got a new WD 640gb sata hard drive, and windows xp setup only recognized 131gb total instead if 640gb.ASUS M2N motherboard bios recognized it as a 640gb drive...Is the new drive junk???

Answer:win xp 131GB hardrive size limitations?

The original version of WinXP with no service packs has a 137GB limit. You need to install SP1 or higher.

6 more replies
Relevance 50.02%

HI . I'll try and make is as short as possible .

I bought the drive came home and installed in on a PC with XP SP_2.
Stated the machine and it took forever to load up windows ( not normally like this )
Went to start to transfer files over , and no disc to be found anywhere (?)
Start/MyPc/properties/hardwareTab/device manager/ and there is nothing to indicate there is a USB hd connected to my machine .
right click mypc/manage/discManagement and still no disc shows up in the menu .(?)
restart the PC .
NOW for the first time ever my pc takes forever to shut down and restart .
when the pc restarts repeat the above and still no disc to be found anywhere .
while plugged in and connected to the machine i unplug the power to the drive and plug it back in , now outta nowhere XP says it has found a new Seagate drive . YAY right , wrong !
i restart my machine and the slow shutDown and restart is still happening ( thumbs down )
when the pc restarts ( finally ) i check the shortCut i made for the HD on my desktop , no hd icon just a grey box with a Question mark . so i unplug and plug the power cable as i did before and bang there it is again ( the hd )

no with this going now i copy over about 100GB which i desperatly need off another internal drive i have ( backed up ) .
well i start to copy and receive an error " Delayed copy failure" bubble from the system tray . Im not the best pc tech but i can hold my own ,and i have never had any problems with this pc . now outta n... Read more

Answer:Solved: Seagte free Agent 250GB USB drive .

7 more replies
Relevance 50.02%

I have been using this USB drive for some time. I have it divided in to three seperate partitions, but recently (and this is the second time this has happened) XP will no longer detect the already existing partitions on the drive. I am able to see the drive in device manager, it shows up as a WD 2500JB External USB Device, as well as in the manage option when right clicking My Computer. However in the manage window it shows the whole drive as unallocated space. I know that there are files on there, (several GB's of customer backups.) it was there just yesterday. Any ideas on how to get Xp to pull it's head out and see these partitions?

More replies
Relevance 50.02%

I'm working through the W500 configuration process.  I like the 250 gig, 7200 rpm drive for its size and speed, but I'm worried that the integrated (and not defeatable AFAIK) encryption will slow disk access time. But I may be worried about a non-issue if the encyption process is not limiting data access or transfer times. I do not need the encryption. Have any of you ordered this drive and then been disappointed by its performance? Jeff

Answer:W500: does encryption slow the 250GB 7200 rpm drive?

are you using a Full Disk Encryption capable seagate drive? AFAIK the FDE have no impact on performances of the laptop. http://www.thinkwiki.org/wiki/Full_Disk_Encryption_(FDE) have a read. 

4 more replies
Relevance 50.02%

I've previously added two home made external disks, a 120Gb IBM and a 300Gb Maxtor, to my Medion PC (Pentium 3Ghz, 18 months old) without any problem. I'm trying to add a 250Gb Hitachi Deskstar but nothing happens - even the fact that a USB device has been plugged in is not recognised. As soon as I replace the disk with a 40Gb Maxtor, it all works fine, so the case and connections don't appear to be a problem. I've replaced the Deskstar, thinking it was faulty, but exactly the same happens with the new disk and Add New Hardware doesn't find anything. I'm on XP Home. Has anybody got any suggestions, please?

Answer:External Drive - 40Gb disk works but not 250Gb

I have experienced similar problems in the past and found that the drive had to be jumpered 'master' for the USB to see it.

6 more replies
Relevance 50.02%

My T410i hard drive died, I have Windows 7 Home Basic OA key, but how to install on new hard drive? I had to replace the hard drive, I realise from the help pages I should have written down the error messages before replacing... Either way I am unsure how to obtain the Windows 7 Home Basic software to re-install.I have the key, where should I go - the microsoft site says it came pre-installed so I need to contact the supplier - Lenovo, but on the product list T410i is too old and not listed. Thanks in advance for you time.CheersPaul

More replies
Relevance 49.61%

Hey guys,

I have a home made computer, System is running off a 250gb hard drive. When I first formatted it, it was showing 232gb (this was ages ago) but somewhere along the way it has changed to 184gb. If I open disk management it shows the drive cannot be extended to fill the space, and even shows that 184gb is the maximum that can be used. However when I use diskpart to look at it in command prompt it shows 232gb as the size of the drive. I have tried extend in diskpart, but it does not let me fix the problem.

I am running Windows 7 Ultimate 64-bit SP1.

Would love any help that anyone can give me!

Thanks.

Answer:[SOLVED] 250gb (232gb formatted) drive showing as 184gb?

Welcome MrMatt90.

Does your system only have one hard drive?

Is the drive you mention the one with your Operating System installed on?

Have you created any backups?

Are there any partitions?

When was the last time you ran chkdsk? I suggest you run it on your drive...
> - Click the start globe/button
> - type cmd and run cmd.exe as administrator
> - type chkdsk /r ?: (replacing the ?: with the drive letter, probably c:)
> - it will ask to run scan on next restart, type Y and restart.

7 more replies
Relevance 49.61%

I bought a Seagate FreeAgent Desktop 250GB drive for a friend a few days ago. I was able to get it connected to a machine running Windows XP SP2 just fine and I could see the drive ok. I noticed about 18GB or so was "used" even though there was only one 73MB PDF file visible when I viewed the drive contents. The drive has 232GB of free space, I believe.

I understand not all 250GB will be available for user data but is it reasonable for 18GB to be consumed by filesystem info?

Thanks!

Peace...
 

More replies
Relevance 49.61%

WD 250GB MyBook External Disk Drive can be detected but cannot be explored

I neeeeed your help on this. I have been --up and down looking around for a solution. Many did came through-- but I don't know which is which.
 

More replies
Relevance 49.61%

I had a thread earlier and forgot to ask a couple of questions.

I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer.

Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.

However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?

If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable.

I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it.

How ever if someone could give me a couple or three scenario's with ide cables and hooki... Read more

Answer:Solved: windows xp hard drive with win98 hard drive-question if someone has time??

Yes - you understand it correctly
 

3 more replies
Relevance 49.61%

Hi,

I am in the process of doing a clean re-install of Windows XP for Home on my PC. I have 3 hard drives:

c: 200gb Maxtor SATA drive - bootable with Windows XP (existing Windows install)
d: 20gb Maxtor IDE drive - non bootable data drive
g: 160gb Maxtor IDE drive - bootable with the clean install of Windows XP for home on it

Windows is not seeing all the sizes quite right yet but I will tackle that when I have solved this major problem that follows:

If I boot from the C drive - I have no problems at all. Windows will see all the different drives as it should do, I can access them all and they all work fine.

When I come to boot the clean install on drive G windows changes the drive letters - G becomes C, D remains as D but the 200gb Maxtor SATA drive isn't seen at all and might as well not exist.

Disk Management within Windows is no help as it can't see the drive, Maxtor software MaxBlast 4 is also no help as it can't see the drive on this install either.

I have checked and rechecked the BIOS but have pretty much discounted any issues here as it clearly shows all 3 drives and all 3 drives are listed on boot up. It's just when Windows kicks in that I have the problem.

I guess it's a simple setting somewhere, but I am pulling out what little hair I have left trying to think what it is - so any ideas would be very gratefully received.

Thanks in advance and kind regards

Stuart
 

Answer:Hard Drive Bootup Problems, Help required - Windows not seeing new hard drive Options

Hi
This is what I would do to enhance performance and storage strategy:

1. Use the 20g for the os and housekeeping utes such as av, spyware, etc only, nothing else goes on that drive.
2. Use the 160g for apps installs.
3. Use the 200g for data.

This might get you past the bios/firmware/os/drive letter issue and make better use of the drives. The 20 isn't really good for storage anymore, but would be great for an os/system ute drive. It's performance is less than the other drives, but that's ok, most of the os will stay in ram anyway after boot, you won't make any real diff having a faster os drive.
You might want to place a pagefile on each drive so pageing can occur concurrently too.
 

7 more replies
Relevance 49.2%

I'm not sure if this is a coincident but I just recently reformatted the hardrives of my main comp. I backed up a lot of data and programs onto my Maxtor 5000XT 250GBUSB drive.
I can watch movies and play mp3's from the drive but I can't consistetly move files from the 5000XT to other drives on my system.
Sometimes a small file will move with no problem other times a 3MB file may say that it will take 10minutes to xfer and it the xfer fails.
I ran CHKDSK with the following command:
chkdsk /f /r G:

CHKDSK says that it will do a five step process. After step three says 100%, I get the following message:
unable to read the security diescriptors data stream

I don't think this is a good message.

So then i try to do a defrag. The defrag prog says that it can't run becaus chkdisk is scheduled. I check the system schedule and there is no indication that chkdsk is waiting to run. The defrag prog. also says that CHKDSK will run after I reboot. I reboot several times and CHKDSK never runs.
I wouldn't be so upset except that I have been using this removable drive as my back-up storage and no I cant reload stuff back to fresh clean main comp.
I have two questions:
1. Is my drive toast?
2. If it isn't, what can I do to fix the problem

Thanks in advance,

VC
 

More replies
Relevance 48.79%

I did this on a Compaq Presario c500 and now i have no audio coming over my laptop. HELP!
 

Answer:Windows Vista Hard Drive replaced with XP Hard Drive. No audio.

You need to install the proper drivers for your hardware. All of the drivers you need are right here.
 

2 more replies
Relevance 48.79%

In summary:  

At the boot screen,
Port 0 (Drive D) is one Size, but then when windows opens fully and it is a
                    DIFFERENT SIZE
Boot screen is entirely different to the Disk Management Screen (And Windows Explorer screen)
___________________________________________________________________________________


In detail :


'Disk Management picture' - text version :
        Disk 0 - Drive (D)     223.57 GB    (same size as Port 4 - my
1st Priority Boot device - SSD in boot screen )
        Disk 0 -
        Disk 1 -    3 partitions    -->    Acer C   84GB free



'Boot Screen picture' - text version :

RAID Volumes
ID     Name             Level                          
Strip      Size             Status                    Bootable
0       Volume 0  &n... Read more

More replies
Relevance 48.79%

my hard drive crash and i just bought a new hard drive. but i dont have a windows cd only product key on my desktop case.how can I install windows on my new hard drive?

Answer:hard drive crash... install windows on new hard drive withou...

Galilee Hello;Allow me to welcome you to the HP forums!I read your post about wanting to restore your PC and wanted to help -- but need more information. Your PC did not come with Win10 preinstalled, so if you were to order HP Recovery Media and use that, it would restore the original operating system, drivers, and HP utilities.  I presume this is NOT what you want, right? So, while you can make Win10 media to recover your PC, it would be a clean-install and nothing would be preserved. You can make such media using this tool: Installing Windows 10 using the media creation tool - Windows Help Note that when you go do download and build install media, the tool defaults to matching what is already installed on your PC (as in, Home for Home, 64-bit for 64-bit).  While you CAN change these settings, do NOT. If you do, the resulting media will be different and will force you to enter a NEW product code! Good Luck 

1 more replies
Relevance 47.97%

I'd been looking for a new laptop for software development (VS 2012) and ordered a W530 with Windows 8 Pro.  Hope to receive it this week.  I ordered it with 8GB RAM, 500 GB 7200 Primary HD, 500 GB 7200 Secondary HD and the 16GB mSATA Solid State Cache Drive.  My post purchase plans were originally just to add another 16GB of RAM from Crucial and an external Blu-Ray burner since I opted for the secondary HD.  However, I found a great price on a Samsung 840 Pro 250 GB SSD so I've decided to remove the primary HD with the OS and install the 250 GB SSD.  My plan is to do a clean install on the SSD after burning the restore/recovery discs.  I've done plenty of clean Windows XP/7/etc installs before, but not sure about getting some of the other software like the Finger Print security working again. Also, do I need to physically remove the 16GB Solid State Drive?  If I simply leave it in the system, but don't install or configure the ExpressCache software, is that ok? Thanks for your help. 

Answer:W530 - Adding 250GB SSD; How to reinstall Lenovo software, Do I need to remove 16GB Cache Drive

I found this article on the Lenovo website. Will this USB option get all of the drivers and Lenovo software (Finger Print Reader, etc) backed up and available for automatic install?http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

3 more replies
Relevance 47.15%

Hello everyone.  This is my first post with a question.  I searched the forums and didn't see anything quite like it.
 
I have a Velocity Micro computer with a RAID hard drive (in case this matters) on which Windows 7 Professional is the OS.  I've forgotten the RAID number designation, but it's the one in which there is no data redundancy.  Both of the two physical disks (1 TB each) must be in place to form one usable drive, which has a 2 TB capacity. At least that's my understanding.  Again, this may not matter to my question, but I wanted to mention it because I'm concerned it could.
 
The computer also has 12 GB of RAM and a 6-core Intel processor, for what that information is worth.
 
A year or so ago (after using the computer for at least a year), software that had worked fine slowly began to fail, one by one.  I'm not sure of the order, but they include...
 
-Windows Update wouldn't download anything or even notify me of updates anymore
-WinTV stopped working; I could no longer record TV shows
-the Windows program that monitors whether I have security software running or need backups or updates vanished from my tray
-BOINC 6.10 kept giving me a message about zero status but no finished file, or something like that
-BOINC 7.0 wouldn't install
-Weather Watcher could no longer be double-clicked to open
-couldn't boot in one operation; I had to get to a point in the process (I've forgotten the details) and then shutdown and ... Read more

Answer:installing Windows 7 on a new hard drive; old hard drive is RAID

All your symptoms point towards malware in your old Wodniws OS.
 
There is no reason that you could not use your RAID array as your storage and boot off another drive, seems perfectly logical as there is no need for RAID with a Win OS as Winsxs.sys already exists within. Yes you change the boot order in the BIOS, set the cd drive first, then point the installation at the new disk which will default to C:\ No need to remove the RAID array, which will appear as additional storage. You may need to install drivers to get this to function correctly.
 
You could of course back up your data to another drive and re-install you rOS on your original disks...
 
Up to you.

5 more replies