Computer Support Forum

Upgrading from XP to Win 7, and saving my data?

Question: Upgrading from XP to Win 7, and saving my data?

Hey all, I've got a question about upgrading from Windows XP to Windows 7.

I've decided it's time to upgrade to a 64 bit operating system, but there is a factor about it that concerns me. I'd really rather not have to perform a clean install, and effectively wipe all my data.

My computer is equipped with 2 hard drives, is it possible to move all my data over to the E drive, and upgrade the C drive, running the E drive as a slave (or any other method with the 2 drives that could work)?

I do have an external hard drive available for use as well, could I transfer all my data, or at least my important data, on to an external drive, clean install Windows 7, and then move it all back in it's respective folders?

I'd really like to receive some enlightenment on this situation.

Thanks in advance!

-Sniper

Relevance 100%
Preferred Solution: Upgrading from XP to Win 7, and saving my data?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Upgrading from XP to Win 7, and saving my data?

to go from xp to 7 means a clean install

you can save to E drive if you have enough room

then move them back after the install

8 more replies
Relevance 48.79%
Question: saving data

I want to save all my data on a seperate ntfs partition. is there a way to default set where all my save data goes IE: i click on save and i by default it saves in d: which is the data partition while c: is the OS partition.

Answer:saving data

Hello & welcome,

Look here for advice on moving the default Documents folder location: -

Change The Location Of The Documents Folder In Vista | Windows Fanatics

1 more replies
Relevance 48.79%
Question: Saving data

I have fixed a lot of computers, but I have never tried to save data off a hard drive.

How would you do that with the SATA drives? I know with IDE drives you could make them slaves drives.

Do you have any problems with old OS being on it? Can you just take it out of the other computer and drag and drop?

Most of the ones who don't know how to back up, just want their picture and programs saved.

Do you have to use Ghost to save the data?
 

Answer:Saving data

As I understand from your post, you have taken a sata drive from one pc and you want to recover the data onto another pc that does not support sata correct?
There are IDE to sata converters or you can purchase a sata external USB enclosure.
http://www.maplin.co.uk/Search.aspx?criteria=ide to sata converters&doy=16m1&source=15
You don't have to use Ghost for data just copy and paste
 

3 more replies
Relevance 48.79%
Question: Data Saving

I have a laptop that is a bit flakey and no other machine. I am worried that it is suddenly going to die on me, whilst the majority of stuff on it is of little consequence, I do have a considerable number of JPEG photos that I would hate to lose. I do not have a re-write facility, how can I save these photos without having to upload to a host site?

Answer:Data Saving

If your laptop is all you have and it doesn't have a CD burner, then consider either an external CD-R or RW, or else an external HDD.Neither way is cheap, but both give you a chance to save precious data and even clones of your whole operating system.A bulky alternative is to search for a s/h computer which if you ask around, might well be yours for a few pounds, if you are not looking for high spec.

2 more replies
Relevance 48.79%

Hi,I want to copy some files onto a Re-writable DVD,is there anyway that i can make the disk protected so that the files can not be overwritten.ThanksSteve

Answer:Saving Data On a DVD

No - use a normal dvd for write protection as a RW can always be formatted

7 more replies
Relevance 48.79%
Question: Saving data to cd

Hi     I am trying to save a file to my CD in my drive and its telling me that there is no CD in the drive. When I check the properties in the drive it says the CD is full. This can't be its a new CD and I tried 2. Is there a setting I am missing. Any help would be very appreciated.ThanksJulia

Answer:Saving data to cd

What program are you using to save (aka burn) the file to the CD?Have you been able to burn CDs in the past?If yes have you changed anything recently? Added or removed hardware or software for example?What version of windows is this?

5 more replies
Relevance 48.79%
Question: Data not saving

I have a problem with a program not saving preset data. Possibly due to harlink extenstion with only one piece of software.

I use symbolic hardlinks on my system but I do not know if the following has any bearing on the issue with the software I am using.

The software is a plugin that works within a host digital audio workstation software (Steinberg Cubase and plugin Soundtoys V5) and uses presets for different settings.

All software is legit and registered. I have contacted the developer regarding the issue with no resolve so trying here as the issue may largely be to do with windows.

The associate plugin has been installed with admin permissions and the host DAW software is run with full administrative rights. I have double checked that there are no hardlink main or subfolders used in the installation path for the plugin software.

All other 3rd party plugins work fine when saving presets and using symbolic links of which there's about 60+ 3rd party plugins installed using the main host system, however this particular software is not saving correctly.

It will save the preset name as a zero byte file and reports unable to save at location.

All other plugins work fine even when using symbolic links when saving preset data.

The issue may have been to do with a previous install of the soundtoys software as a phantom install directory is being created during the installation

E:\Users\Public\Documents\Soundtoys\Soundtoys 5

I did originally install the software usin... Read more

More replies
Relevance 48.79%
Question: Data saving

Is there a good software that I can use to retrieve data from a hard drive that has been corrupted?
 

Answer:Data saving

Are you able to attach the harddrive to another computer, then retrieve the files?

Or does it not allow you access?
 

2 more replies
Relevance 48.79%

Hi all. I hope I'm posting this to the right forum!When I want to save a copy of my data (mainly word docs) I simply write them to the cd-rw. However, a few months after doing that I decided to save them again, as some had changed, and more files had been added. So I just copied over the My Docs folder.I would have thought that it would simply update the earlier files, and maybe it did that, but somehow I ended up with 2 copies of everything. Maybe I wrote them twice or something. There were also mp3 and midi files, with the result that the cd-rw is now FULL ! The following questions come to mind:1 Can you delete files from the cd-rw? I tried and couldnt, it said it was "read only".2 Is it possible to re-arrange, drag and drop, etc on the cd-rw i.e. to tidy it up, as it were?Also a strange thing has just happened with my cd-rw. I load it up, right click, go to properties, and it says Used 542 kb Free 254 mbBut when I right click the folder on the cd-rw (My music and Docs) it gives:Size 349 mb, which is more realistic. I just inserted another cd-rw, which is absolutely full, and right clicking gives a size of only 203mb !!?Wonder whats going on?KC

Answer:Saving data to cd-rw

To do what you are trying to do (use a cdrw disc as a big floppy) you need to use a program such as InCD which comes with Nero. This program formats the disc and you can then drag and drop and it will overwrite earlier versions of files. You are probably using winXP which probably writes to the disc in sessions and the disc that says its full has probably been closed and can't be written to again unless you erase everthing from it and start again.

1 more replies
Relevance 48.38%

I am going to format my c: and re-install winXPproSP1.

If I move my data to other partitions other than my C:, will that data be accessible once windows is installed?

(Is formatting my HD and re-installing windows going to remove the "index" that my computer uses to access files on partitions other than my c:?)

Answer:re-formatting and saving data

I know this might be a stupid question, but I dont know and would like the answer to it.

please help.

thanx for your input.

9 more replies
Relevance 48.38%

i have win 7 loaded on USB drive
when i click on repair win 7.
it says there is some problem and there is a window to send the info to microsoft
thats it
i don wanna do a fresh install of win 7 because i have some data to save..
please help

Answer:saving data while installing from USB

If you have a External HD, you could copy & paste your data.
Copy & Paste - in Windows Recovery Console

2 more replies
Relevance 48.38%
Relevance 48.38%

I am currently going to wipe out all data on my hard disc and start from scratch. what is the best way to save mp3, Microsoft Office data and programs that i don't want to loose? Is there a program that i can use to compress this data small enough to fit it on a disc? I'm going to treat this as a starter question b/c I'm not sure what information you need. thank you for your help. 

Answer:Saving data to disc

Quoteand programs that i don't want to loose?Firstly, you can never backup programs properly. 7-Zip should do the job for the rest of the files. Download 7-Zip.

3 more replies
Relevance 48.38%

very often when I try to save whatever is on the screen it won't save.  I believe it started with Linked and now it affects whatever may be on the screen.  Ithought it was a virus or a lock but it doesn't make sense.  Some stuff will save others not.  I'm 73 and relatively new to this technology, so don't laugh!What I've had to do is copy and paste onto word then save that.Thanks

Answer:Saving data, emails, anything

Here you will find others that have the same problem.  Myself, for one. I am now 76 and have been classified as 'legally blind' for several years. So I can not drive a car and I get a slight bark on income tax. I need to use a computer in order to read without a lot of  eye strain and neck pain.I used to copy and paste stuff from the current view and paste into notepad. That way I could enlarge the text for better visibility and not be hindered by pop ups and overlays.Recently I  notice some website do something to make it very hard to copy and paste a part of a web page. To date I have not seen any explanation of this.The only work around  I have is to use the 'select all' option. I use ctl-A to select the whole page, including what is not in the current view.  Then I  have to paste into notepad and look for the part  I wanted to read.  Yes, the browser has a zoom feature that helps. But graphics and scripts do not work well with high zoom settings, Like a 4x zoom. It gets to be a mess.When I paste into notepad, the graphics and scripts and special effects do not transfer. I get  just the text. For some reason some websites do not allow me to select a portion of the ext. So I have to select all.Maybe this would help you.  EDIT: Tthis search may help also:why you cannot select text in a web page

5 more replies
Relevance 48.38%

A few days ago, I woke up to a computer lacking internet access. In the process of trying to fix it, my computer got severely owned. Long story short, my computer, for reasons beyond me, sucks now. It is slow, bloated, freeze-happy, and generally a pain in the ***. My computer used to not suck. I long for those days.

I've reformatted before (more than a year ago, so the details are hazy), and since then and now my music folder has grown from a few hundred to slightly over three thousand songs. I like these songs. I do not wish to lose them.

Currently, I'm .RAR'ing my entire music folder, which is--

I just right clicked my "Multimedia" folder to find the exact size and it froze. A bloody right click froze my computer... yeesh.

continuing....
--
Ok, so I'm .RAR'ing my music folder, which is 12.3 GB... At 40% archiving, I have 8 .rar files, so thats 8 cds. Around 100%, I'll have at least 18. 18 cds to burn, label, store, and then re-upload after the format = huge pain.

I deleted all my movies so all that is straight up music all of which I plan on keeping. The rest of my data is less than 700mb so I can fit it on one cd.

What I would like to do (and I don't know if this is possible, so it may sound retarded) is to (and I'm delving into unfamiliar territories, so if I sound ignorant, it's because I am) "upload" my music folder onto a separate partition on my hard drive, and then begin the formatting process, and delete the partition contain... Read more

Answer:Saving data before reformatting

Use an external hard drive or burn everything onto 2 DVDs... that's the easiest... You wouldn't even need to compress anything.

3 more replies
Relevance 48.38%

I'm having multiple issues on my Compaq Presario 700z notebook, including an unmountable_boot_volume error, dac2w2k.sys error, and ntkrnlmp.exe error. Compaq has told me I will have to reformat the HD and reinstall windows. The tech I chatted with said I could take it to a service center to retrieve my data before doing this. Can anyone tell me how to do that from home?

Thanks,

Brooke
 

Answer:Saving data before reformatting when I can't get in?

6 more replies
Relevance 48.38%

Hi, not sure if this correct place for this question. I wish to download a vehicle workshop manual from a webpage to a CD or DVD so I have a permanent hard copy of the , but not sure how to go about it, it would be a large file.

Answer:Saving Webpage Data to CD/DVD

Hi, normally if its a Manuel from a website they normally give you a pdf download format if not on your browser go file>save as> webpage document or right click and go save as and will direct link you back to the webpage.
you could also just copy the content of the page and paste it into a word processor and then save it.
then check the size of the document and put it on a CD/DVD with enough space!
hope this helps.

2 more replies
Relevance 48.38%

Having trouble saving some files I copied from my old cp to my hard drive, appreciate some help.

Thanks!!
 

Answer:Saving from data cd to harddrive

Start,Programs, Accessories, Windows Explorer....find the cd drive on left side of box and open right click to copy what is on the cd, then right click paste to where you want it on the right side of ther box
 

1 more replies
Relevance 48.38%

I have Windows 98SE and Office 97 on my computer. For various reasons that involve other problems w/ my computer I need to be able to save all the data on my Outlook calendar and mailbox. Is there a way to back it up and when I reload Office 97 re-load the data? I am not real bright about computers, but can follow step by step idiot-friendly directions just great. (Please don't assume I know ANYTHING about manipulating these programs.)
(If needed, I have an AMD Athlon processor and 512MB RAM.
Thanks!
 

Answer:Saving data from Outlook 97?

Go to file> import/export and export all of your stuff to a .pst file that you can save to restore all your mail later. If you are not on an Exchange server you are probably already using a .pst file. do a search on your C: drive for *.pst
 

3 more replies
Relevance 48.38%

Sorry if this query is basicwhen saving my photos to CD I'm told there is no disc in the E drive - why do I get this message, ( I'm using Packard Bell CD-RW 12x Speed 700 Mb capacity discs )

Answer:Problem saving data

What operating system are you using and what program do you usually use to burn to disk?

10 more replies
Relevance 48.38%

hi-
Due to spyware, viruses and who knows what else, i need to repair some key os elements. What will this wipe out as far as data? Do i loose all document and settings information?
Thank you in advance.
 

Answer:reloading xp - saving data

This gives a step by step guide to 'repair' and keep data http://www.uea.ac.uk/itcs/software/xp/xprepair.html
 

3 more replies
Relevance 48.38%

Hello Everyone,

I am not able to save data or music to my disc. What should I do ? i think I do not fully undestand the process. Please help and make simple.

Thanks
 

Answer:Saving data to disc

amie4christ said:



Hello Everyone,

I am not able to save data or music to my disc. What should I do ? i think I do not fully undestand the process. Please help and make simple.

ThanksClick to expand...

Hi

Disk ??

Hard disk, CD Disk, DVD Disk, Zip Disk,

Post back and explain a bit better as to what you want to achieve, and what happens when you try.

Regards
 

1 more replies
Relevance 47.97%

Okay, so this is weird. I've tried numerous google searches about this and nothing has come up.

Google chome is not saving only particular form data, for instance my username: therealdrag0. Also my main gmail account name isn't saved. It's so annoying. Other stuff I put in, other emails in the same form, are saved, so that when I come back they drop down, but my main one isn't.

Any thoughts?

Thanks,
Zachariah
 

More replies
Relevance 47.97%

I have a column of numbers which I'm summing together everyday. The data in those columns changes everyday. In another column I have various dates and in the column next to that I have the per day totals.

So, in the column with the per date totals I have the formula
=IF(TODAY()=C2,SUM($B$2:$B$50),0)
=IF(TODAY()=C3,SUM($B$2:$B$50),0)
etc.

The problem is that when today becomes tomorrow, I lose the total. Is there a way to keep that total without loosing the today() command in those cells?

Hopefully that's not too confusing. I would post an attachment but my work thinks the popup is a gaming site... Thanks for the help!
 

Answer:Excel - saving today() data

16 more replies
Relevance 47.97%

How do my two hard drives work, vista:C data :E, All my stuff only goes on the C drive, Not on E.
How do you set them up to have some on one & some on the other?

Thanks Nigel

Answer:Satellite A210-1c0 - data saving on HDD

If you want to save some data the system ask you where all this should be saved. Choose the right place under E (some specific folder) and be happy.

2 more replies
Relevance 47.97%

  Hi! I inherited a computer from my Dad after he passed away and gave my old one to Goodwill. It's been updated and I have no problems with software, etc. thanks to some guru friends. My Dad always did things first class and so it has a D and E drive. One is Read/Write I think and the other is Read only, although I really do not know which one I should use for music CDs. When I put a music CD in either drive it says: "A required .DLL file, MMVCP70.DLL was not found." When I try to save data to a CD (D or E drive) it says: "The selected drive disk is not in use. Check to make sure the disk is inserted." The disk is inserted. What am I doing wrong? I am fairly computer savvy but this is out of my league.

Answer:CD: Playing music & Saving data on

So what I think I've got so far is that the Hard disk is C:, D: & E: could be either cdrom or a cd writer.  What OS are you using and what burning software are you using to "save" (burn) to a cd.How old is the system, what kind of disks are you trying to burn to/read from, cdr or cdrw?

8 more replies
Relevance 47.97%

I have an old Seagate model ST310211A 10GB hard drive, that was in a PC with a bad mother board. Can I recover the data from it by making it a slave drive and putting it in another working PC. My concern is that the drive with the pictures has Wins 98 and the working PC has Win XP. I also have one with Win 7, but I figured the closer the better?
Am I on the right track? Or is there a better way to get the pictures off it. Don't have money for a pro to do it!

Thanks
 

Answer:Saving data on old hard drive?

I'd use one of These USB adapters ... Then just read the Data like it was a USB flash drive
Assuming the HDD is still functional ... A pro is not needed
 

2 more replies
Relevance 47.97%

I do this quite often and I am very annoyed. Everytime I connect a hard drive [xp, vista, or windows 7] and try to access it I get the message that I don't have the right to view it.

I have to use the "take ownership" feature. I am an administrator so what gives.

running windows 7 professional with microsoft security essentials and windows firewall

Answer:saving data from another hard drive

Are the files on these hard drives you are connecting yours? Did you originally create these files?
Are you installing/connecting these hard drives to your motherboard, SATA connector, or by USB?

If you did not create these files on the PC that you are trying to open/view them on this is as it is supposed to be. All the data on those drives has permissions set be another username and PC. Until you change the permissions and or add your username to grant you permission to view/open/whatever you will get this message.

1 more replies
Relevance 47.97%

Basically I have forgotten how to do something really basic....

I have forgotten how to save a table or query into a comma delimited format (from an Access 2000 table or query to a comma delimited txt file). I know this is a really basic thing to achieve in Access (because I could do this with my eyes shut) but my memory is not what it was.

Many Thanks In Advance

The Thick One !!!

PS. Merry Xmas Everyone!!!!
 

Answer:Saving Access Data Into Different Format!

6 more replies
Relevance 47.97%

Hi All,

My SSD C: drive is 124GB. Unfortunately one of my programs saves huge of data in C;\application data.
over 40GB!!. Is there any way I can do to avoid it? I have to note that the location is not the choice of the user. I use Windows 7 Ultimate.

Thanks for your help

Shaul

Answer:How to avoid saving data in C drive?

What program?

8 more replies
Relevance 47.97%

my windows xp is freezing up so i need to reinstall and i need to know if there is a way i can save my data and files in the safe mode?

Answer:saving data from safe mode

USB Drivers/External Hard Drives will work in Safe Mode.Oh, and you should be able to burn CD's, I'm not sure.We might be able to cure your Freezing problem. Do you want to?

11 more replies
Relevance 47.97%

Though I may not have to do this for hopefully a long time how do you save the data/programs on a partition when you reload the OS. Recently I had to reload one of my XP computers, once up and running I was not happy to find that I could not access my partition, when I tried it went the way of a Format. Seems to me there should be a way to access a partition after a reload.

Phil

Answer:Saving Partion Data/programs!

When you say "Reload" do you mean a repair install?

5 more replies
Relevance 47.97%

this should be simple: i just want to save the data structure without including the data.
 

Answer:MS Access (saving structure w/out data)

I'm assuming you want to copy a database without the data (just the structure).

Create a new database. In the new database click on File|Get External Data|Import. Select the original DB. In the Options section there should be a choice to import structure without data. Select all tables from the original DB. That should do the trick.

Good Luck!
 

1 more replies
Relevance 47.97%

i have 2 groupbox's in form1, and in both i have like 5 checkbox's.i also have a button called btnSave and another called btnLoad. my question is, how can i make it so when i click btnSave, the staus of all the checkbox's (whether they are checked or not) is saved to a file. and when i press btnLoad, they are loaded.
hope i made myself clear.
i really need an answer for this urgently.
thanks in advance.
 

Answer:noob - Saving all data in delphi

Do you know how to process files in Delphi? If the answer is yes, please follow:
*/Read the state of the check boxes and their names
*/Write these values in a file (eg, state.txt), with a consistent format (eg, name1:checked, name2:nochecked ...) name1, name2 is the name of the check boxes, and checked, nochecked is their values. Of course, you could format it with your own.
*/Close the file
*/When you need to load the states, just open the file (state.txt) and read the string in it and check the values of the approriate check boxes.

Hope this help

PS: If you don't know how to process files in Delphi, google it
 

1 more replies
Relevance 47.97%

Help! My Gateway Windows XP desktop computer shut down because the electricity went off. When I tried turning it back on a day later, it came up to the screen telling me my computer unexpectedly shut down, giving me options to restart including Normal, Last Restore Point, and then 3 Safe Modes, one just Safe Mode, one Safe with Networking and one Safe with something else (can't remember). Well, none of these options worked. I tried each option and all would try to boot, but just start over.

So, I then MISTAKENLY used the F11 "Recovery" option (which I have since learned was a no-no) which started a process I thought would just "recover" my computer. It went through some things that I didn't follow along very well with, but I didn't have to click on anything until it now says
"System Restore - Format and Recover
All files, including data files, on the user partition will be lost and the original factory-shipped files will be recovered to the user partition.
Do you want to continue?"
And the only option to click is "OK".

I have since learned that if I would have booted with my Gateway system disk, I may have had the option to click on "backup files".

My question now is, can I get out of this? If so, how? (I actually already tried just shutting down my computer, booting with system disk, hitting "R", but it brought me back to this same screen) I REALLY want to backup my data. I don't care if I hav... Read more

Answer:saving data on unbootable computer!

7 more replies
Relevance 47.97%

Hello forum: I frequently download IRS and other sites'  fill-in forms into my documents and then fill in the forms and then print them. In the past when I went back into the form at a later date the previously entered info was still in the form.  Always.  Now, when I go back to the form it is always blank. Even if I ' save ' a copy of a filled in form with all the fields populated, it is always blank. I can see the info just blink off and the form goes blank when I go back into the form and look at it. Right now all of the pdf. forms in my Documents have no info in any fields even though I have filled them out in the past. I am using WIN XP SP2, IE 6, Adobe Reader 6.0 with the last Reader update 6.06. I have asked around  looking for others having the same experience and everyone says that they never could save info in the filled in forms . But in the past I always could . Did something change or is there a setting that I can reset to correct this? This is the first time in 5 years with this computer (Dell Dimension 2400) that this has occurred.  Thanks.

Answer:Adobe 6.0 not saving data in forms

Typically, you need the full version of Acrobat (or an alternative PDF editing program) in order to edit a PDF in some way.  Reader's not enough.If you were able to do it in the past, then it's because you also have a version of Acrobat AND Reader 6 on your computer at the same time.  When Reader was updated, it took over as the default program for opening PDF files.  Open up Acrobat or whatever program you have for editing PDFs, open the IRS form, and try that way.Alternatively, you could uninstall Adobe Reader 6 and try opening your PDF.  Best case scenaro, if you do have Acrobat, then it will automatically open your PDF.  Worst case scenario, the PDF won't open at all and you'll have to reinstall Adobe Reader (download from Adobe's site...latest version is 9.0), Adobe Acrobat (install from any discs you may have if you purchased it in the past), or whatever PDF editor you may have.

12 more replies
Relevance 47.97%

Hi, i have a question in creating a file in which i can fill out the worksheet "form" and by clicking a save button, the data will be saved into worksheet "database" in the next row. basically i do not need to amend data from the "form", but i will rather update in "database" manually.

thx for your help in advance
 

Answer:excel - saving data to another worksheet

Hi there, welcome to the forum.

I think you should take a look at the link blow, this is something similar

http://www.contextures.com/xlForm02.html

If you get stuck, let us know.
 

1 more replies
Relevance 47.97%

My PC as of late has been running awful. When I have a game running it'll run fine, however it's navigating the PC when say in a browser, or just copying files, or anything really outside running a game that is running horrible. I ran malwarebytes and did a scan and corrected, same with Housecall, was gonna do a CCleaner but I'm at the point where I'm fed up and just want it running smoothly. When I'm in firefox if I do something as simple as ctrl D to bookmark a page everything freezes. So I'm ready for a fresh start.

I'm going to find my Windows 7 disc after work and reformat. However I would like to backup important info. If I clone hdd to hdd it'll save everything and make the reformat pointless as far as I know. So that's not an option. I know how to copy/paste my picture files. That's easy.

How would I go about saving my steam game files so that my in game progress is erased? I have a 160gb internal hdd installed, I'm using a 1tb internal for os and everything. So I can use the 160. I also have an external 160gb hdd I can use.

I started to clone the hdd and quickly realized that's not my course of action. So after backing up my browser bookmarks, and pictures, how do I save all my steam game files? Don't think i"m worried about losing any other data besides that.

More replies
Relevance 47.97%

Some time ago I wrote an Access database for a company, last week they asked me why it had stopped saving data. I said I did not know, but I suspected the user was doing something wrong. That was until yesterday when I was contacted by a second company and asked if I knew why their Microsoft Access had stopped saving data. I have not visited either location but suspect that a recent Microsoft automatic update has caused this problem. Both these databases are on a small network. Has any one suffered anything a similar problem?

Answer:Access database not saving new data

Haven't seen this before. Which version of Access? Have you done much coding behind it or is it fairly straightforward?The fact that two independent companies have come forward suggests it might be update related to me otherwise I would have suggested volumes but for both of them to hit a particular volume where the database had a problem or became corrupt in the same time period seems unlikely or a big coincidence.Can't they send you a copy to take a look at and try on your machine?Have you searched MS knowledgebase ? If a Microsoft update had this effect I think it would be in there fairly quick.

4 more replies
Relevance 47.97%

With my new computer and Windows 7, I'm finding that information that I enter into the different sites that I visit is saved at that site. Is there an adjustment I can make so that the information I enter into the site like on Ancestry is not saved, and dissapears immediately after I leave the site?
I have subscriptions to several sites, and each one has a long list of names that I've entered that I will never use again.
 

Answer:How to eliminate forms from saving data

7 more replies
Relevance 47.97%

I have earlier successfully used a SATA\IDE adapter with a 12v=2A/5 V=2A power source (don't know what the two values actually mean here) for saving some data from a harddrive in a broken PC. Can I use the same adapter for saving data from a laptop harddrive? The adapters seem to fit with the extensions I have, but the specs on the harddrive says 5V 700mA. Or will the output of the power source be "too strong" here?
 

Answer:Saving data from laptop harddrive

that should be OK -
you have an adapter - 5V 2A - so the max current is 2amps
and you only need to provide 700mA or 0.7amps
 

3 more replies
Relevance 47.97%

Hello. Still trying to get used to Vista after have xp for some time. I am stumped on saving a data file that I copied to a cd from my old cp. How do I save it to my hard drive.

Thanks
 

Answer:? on saving cd data to harddrive thru vista

View the file on the CD in the documents viewer (explorer) and right click it and select Copy.

Then navigate to the folder where you want to put it and right click and paste ...

Its no different to any other Windows version in that respect?
 

2 more replies
Relevance 47.97%

I am almost in tears now. All my pictures, videos and other important irreplaceable files are in my Western Digital passport hard disk - about 450 GB worth of it.

The Problem (what happened :

I plug on my Hard Disk as usual, but this time when I click on certain folders, it gets jammed, and though I can still cruise through the folders, all the files had disappeared!
I try safely removing the hard drive, but it says that the hard drive 'is still in use', so I just pull it off.
When I plug it back on, I was relieved! Everything was there but after about 5 mins and/or going to certain folders - BAM - it happens again - freezes and everything disappears. And again the hard drive cant even be safely ejected and I have to pull it off.

So, I plugged it back & I tried saving some of my pictures the pictures were copying fine until it got to a certain picture - BAM - it freezes (said something like 'Access denied or no specified file to copy'.
Now I'm so scared to even plug it back on! What happened to those files? corrupted due to virus attack? irretrievable? But I can still see it there! it even previewed...
OMG. Please help me. I'm going out of my mind. Its enough that my laptop is dieing and now my hard disk too?

How am I going to save my data?...
 

Answer:My WD Passport is failing - need help saving data

Take the Passport to a computer repair shop or back where you bought it and have them recover your data to a new external drive before it's too late. You will need a new external drive anyway
 

13 more replies
Relevance 47.97%

Hi,

my SSD failed and I need a new one. Is there a possibility to save or extract the recovery data which content the Windows Version so that I can install my already existing Windows starter Version on my new SSD?

The recover option doesn't work.

I have a Toshiba NB510-109

Answer:NB510-109 - Saving the Recovery data

This small netbook was originally delivered with HDD so I?m asking myself how have you installed original recovery image on SSD.

Anyway, if SSD is completely death I don't see any possibility to do anything about that. What you can do is to order original recovery disc for your machine but my recommendation for you is to install own Windows 7 32bit version using Microsoft installation disc.

I have done this on my NB520 and, believe me; it runs much better as original starter version. Graphic performance is much better when I watch movies.

8 more replies
Relevance 47.56%

So, subsequent to my previous thread...

(Basically, I have an Access database which is to be used by many users to make changes).

...once the record has been amended, I need to allow the user to either "save changes" or "exit without saving". At the moment, the data is updated as soon as I leave the form - how do I get round this?

Thanks

Ed
 

Answer:Solved: Saving (or not) changes to data in a form in Access 97

If the user does not want to save the changes (or additions) they can press the Esc twice to "Undo" the Actions.
However if you want to have a second Button that says Close without saving then before the button's VBA code Docmd.close enter
Me.Undo
 

3 more replies
Relevance 47.56%

Hi everybody
The more I tinker around with W8 the more I like it.

As well as the built in Mount Command (Bye Bye Daemon Tools) for mounting ISO images in W8 this one is a REAL: beauty for saving and restoring your OS.

http://www.eightforums.com/tutorials...tem-image.html
It will create a file called install.wim (this type of file might already be known to people who deploy a lot of Windows instances).

For Restoring :

After the image has been re-created (includes all your apps etc) start the REFRESH PC from the control panel

Choose the INSTALL.WIM file you created and you'll find your system restored with all the applications etc.

In the severe event that you need to re-boot from an external medium -- I'm working out how to do a recovery from a boot disk - do the following:

Currently It's a two step option -- REFRESH from the install disk
then Control panel and refresh again using your own install WIM file.

I'm sure I can make a bootable USB as per "Win2GO" type of method so I can avoid the need to run it twice if I have to recover totally via a boot.

Guys who are more experienced with WIM files might like to add to the thread to avoid the method of having to run the refresh TWICE if I use the Windows install disk to refresh the system --there must be a way to point it to a user created WIM file or create a USER recovery disk / usb.

Cheers
jimbo

Answer:Built in Refresh saving your own data etc. - No need for Acronis Etc

Hi Jimbo … I think the syntax should be "recimg"

4 more replies
Relevance 47.56%

My Equium A100-27 has an 80GB hard drive, this is slit in half C drive and E drive.

I understand that the E drive is used for system recovery purposes but can I also use it to store data on?

If I do use it for data how much room should be left clear for system recovery?

Answer:Equium A100 - can I use E drive for data saving?

This is old notebook model and it has no ?recovery data? saved on second HDD partition.
So you can do with this partition whatever you want and also use it for data saving or data back-up.

3 more replies
Relevance 47.56%

"Saving to a lossy file may cause changes to image data"

What does it mean? what do i have to do to save the changes?!?!

PLEASEEEEEEEE asnwer! someone!
 

Answer:Saving to a lossy file may cause changes to image data???

11 more replies
Relevance 47.56%

Hello, hoping you can help me out with a friend's PC.

Here is the situation:

1) "Computer A" is the main computer. It starting having issues, HD making noises, and blue screen of death occurring.

2) THERE IS LOTS OF DATA on Computer A that needs to be saved

3) So I said to do this--- Will this work? What type of problems <might> occurr? Also, is this process correct?

- take Computer A's hard drive out
- place ( install ) it in Computer B, as the slave drive
- Computer B should just recognize it and place it as the next drive letter (via windows explorer)... nothing else needs to be done???

- If this works, just take the data off of Computer A's hard drive and save it to Computer B.

Notes:

I'm not sure which or what OS either computer is?
Should it matter?

No other settings should need to be done, right? Or should something be editted or changed in CMOS?

Thanks for your help.... I've done this on my PC (long time ago) but can't remember any little details--- I thought you can just pretty much attach the second HD to the existing cable (as the slave drive)

thanks
Larry

Answer:Hard Drive Problems - saving data - help!

oh... I forgot...
you need to set the jumper on the second hard drive to "slave" setting.
hopefuly, the second drive has easy to read diagram of the jumpers

any thoughts on the 1st post?

4 more replies
Relevance 47.56%

I have bought an external hard drive and I would like my various programs to automatically save data to the external hard drive. How would I do this? Would I need to install the programs onto that hard drive?
 

Answer:Saving data to external hard drive

tcroc26 said:

Would I need to install the programs onto that hard drive?Click to expand...

Quite possibly, what applications are we talking about here?
 

2 more replies
Relevance 47.56%

I'm trying to get some clarifications on using DVD's to back up data files and retrieving those backed up files.

If you save files to a DVD-R, must all the files you wish to save be saved in the same session?

Are the data files "burned" to the DVD or copies and pasted to it?

Will retrieving those saved files from the DVD in the future be a simple copy and paste from the DVD to the hard drive?

Thanks for your help
 

Answer:Questions re saving and retrieving data files from DVD

7 more replies
Relevance 47.56%

I am looking to save some data from 95 Windows operating System and bring the information to XP operating System.

I was thing of using Thumb Drive by the one recommend is Cypress Generic USB. I cannot locate one.

I am lost in how to get the data from one operating system to another. Any ideas. Will be greatful.
 

Answer:Solved: Data Saving & Transfer 95 Windows to XP

It's unlikely you will find a thumb drive that will work with a computer old enough to be running Win95 without a search for drivers or installing an upgrade of the USB to v2.0.

If both machines are desktops and have compatible interface (the old machine will likely be IDE), you may be able to remove the hard drive from the old machine and install it as a Secondary Master drive in the new machine. Assuming it's recognized and you can open it, all you would need to do then is drag and drop the files you want into the C:\ drive where you want them.

Another alternative would be to purchase an external USB enclosure, install the Win95 drive into the enclosure and see if you can access it that way. Drag and drop would still apply.

The drive format for a Win95 drive will probably be FAT or maybe FAT32. either way, XP should be able to read it.

Raybro
 

2 more replies
Relevance 47.56%

The event looks as if it is entered but then reverts back to 'no event'

Answer:Why isn't data entered on my calendar event not saving?

Is it not syncing between accounts? Or just the one account it is entered to?
What account is the Calendar linked to? Make sure that account can sync.
Settings > email + accounts > tap the account name and make sure calendar is set up to sync there
Settings > email + accounts > hold down on the account name and tap "sync" from the pop up menu
Whenever I add a Calendar event, I always manually sync the affected accounts afterward, just to do a sanity test.

2 more replies
Relevance 47.56%

I've got an internal Seagate hard drive which is not in such great health. It first showed some symptoms when in my Sony laptop (see http://answers.microsoft.com/en-us/...af-b199-47b5-b403-29fc57066dce?tab=AllReplies ). I was able to retrieve some files using Unstoppable Copier, but this program kept stopping when encountering a bad file or sector. I removed the HD and installed it via the internal SATA to my home computer and began copying files. But whenever it encounters a bad file I'm trying to transfer, it slows down and I have to reboot. And about 50% of the time after I reboot, the suspect HD isn't detected in My Computer.

I'd like to save all the good data - and have a list of the files which are bad or won't copy. But with the computer constantly needing rebooting, this is becoming a very frustrating/tedious process.

Does anyone have any ideas of how I could easily save all the data without having all these interruptions?

Thanks in advance for any help.
 

Answer:Saving data from failing hard drive

16 more replies
Relevance 47.56%

Hi guys,

Having massive problems with the dreaded BSOD making my computer almost unusable.

The system either crashes when I attempt to load any program or if it loads the program it runs very slowly and eventually hangs and crashes.

I've run the SF_Diagnostic tool and have attached the results.

Hope you can help

Answer:BSOD when opening programs or saving data

The computer is running fine in safe mode which has enabled me to do a malware scan and nothing has come up. I've done a memory test through bios and nothing came up there. I'm thinking because I can work fine in safe mode it's more an issue with a corrupt driver?

Not a whole lot sure what to do next and it's stressing me out. Any help is appreciated!

4 more replies
Relevance 47.56%

I have several large files I would like to save to disc to free up storage. Also I would like to make emergency back-ups of games in case the original discs are damaged, lost, etc. I only have a CD-RW drive so, my question is: Can I only use CD-Rs/CD-RWs to save? I'd prefer to save them on DVDs because of the large amount of storage space and I've heard they will not deteriorate as fast as a CD.
 

Answer:Saving large amounts of data, etc. to disc

If you have only a CD drive then you may only use cd media.
I suggest that you get a copy of Norton Ghost.
Norton Ghost will allow you to backup your files or the whole disk drive.
 

3 more replies
Relevance 47.56%

I have an external enclosure with a 160GB SATA2 HDD installed in it. THe enclosure is connected to my Linksysea3500 via USB and I can log into it with a defined user and password. I have it as mapped drive (Z) under windows yet the last several times I have transferred DATA to it IT IS NOT THERE the next day when I go to retrieve it. Its not a HUGE deal but I just reinstalled windows cause I wanted to (had no issues just wanted a fresh start) and had saved several things on that darn drive and when I went to reconnect after install it was all there I transferred over some data and left rest on there till I wanted to put it back on local pc. and I just logged in a second ago and the only thing there is data I transferred to it about 3 weeks ago, WTH??!! why is it doing this?? is the drive bad?? can I test it somehow without actually plugging it into the pc??
 

Answer:Solved: External drive NOT saving ALL data??

13 more replies
Relevance 47.56%

how do i get all my data to go directly into a second hard drive, which has no operating system on it, instead of the one with the operating system on it

Answer:saving data on secondary hard drive

Assuming this is a master/slave setup:Simply drag and drop or cut and paste?

3 more replies
Relevance 47.56%

My husband has just bought an Acer laptop running XP with an NTI CD & DVD-Maker (Gold) in it. Since I'm the supposed techy in this area, it's my job to understand how to operate it & then teach him. I've read through the 'Help' section and think I get most of it but am really stumped when it comes to which file system to use. I've never run into this before and the choices are:ISO 9600 standard level1; MS-DOS file names;Joliet; Romeo and UDF. We use the drive mainly to back up our word documents so does anyone know which is the best one to use?
 

Answer:Which file system to use when saving data to disc

ISO 9600 - Joliet or Romeo... Joliet stores file names up to characters, with trucated names for Dos.. Romeo stores up to 128 characters. People stick with Joliet for compatability.

UDF is for packet writing, which may be convienient, but is a dangerous way to store things on disks. If something goes wrong during writing, generally all the data gets lost. Also, you'll find some systems won't be able to read the disks. Besides, CDR's are cheap enough..

By the way, you're probably better off using a flash drive and forgetting about burning disks if it's just word documents.
 

3 more replies
Relevance 47.56%

I'm on a team that manages a network with about a 100 computers. Some of the people using MS Office experience extremely slow saving and closing of the program. Occasionally while one of the programs of MS Office is hung up trying to save, the program will crash resulting in the loss of all their work. Everyone is running windows 7 Professional 32 bit. MS Office 2010. The servers are all running Server 2003 Standard Edition 32 bit. Everyone has roaming profiles.

Answer:MS Office Slow Saving and/or Losing Data

Hope you don't have the Outlook Connectors feature installed. Or at least have backed out KB2412171 which was a pain.

2 more replies
Relevance 46.74%

Hi,

I am thinking about upgrading from Windows 7 home Premium 32bit to Windows 7 Ulimate 64 bit so I can free up the unuseable ram on my pc.

As far as I know this would have to be a clean install please correct me if I'm wrong. The problem I have is saving all my data, programs and settings. Could someone please let me know what would be the best way of doing this. Can I just make a full backup on to an external hard drive with windows back up and then restore from the external hard drive after the upgade to windows 7 64 bit is complete or is there a better way that this can be done?

Thanks in advance for any help.

Answer:Saving data to upgrade to Windows 7 ultimate 64bit

  
Quote: Originally Posted by fwells


Hi,

I am thinking about upgrading from Windows 7 home Premium 32bit to Windows 7 Ulimate 64 bit so I can free up the unuseable ram on my pc.

As far as I know this would have to be a clean install please correct me if I'm wrong. The problem I have is saving all my data, programs and settings. Could someone please let me know what would be the best way of doing this. Can I just make a full backup on to an external hard drive with windows back up and then restore from the external hard drive after the upgade to windows 7 64 bit is complete or is there a better way that this can be done?

Thanks in advance for any help.


Got some bad news. I am fairly sure, you must due a clean install only when going from 32 b it to 64. You cant restore the backup for you would end up back on 32bit.

2 more replies
Relevance 46.74%

Running ACT! 6.0 on windows 7, working perfectly until today when notes and history entries are no longer being saved and disappear after entry. 7005 contacts in the database, 4800 in other database with same problem.
 

More replies
Relevance 46.74%

Alrighty then.........

So my son needs a new box.
I'm putting together a new S1156 system around an EVGA P55 FTW board.
He is a pretty big MMO guy. So he has WoW and all the bizillion updates I'd rather not have to deal with on a fresh install.
Currently he has W7 and about 200GB of stuff on his HDD.......no prOn that I KNOW of.

I'd like to do a clean install on a SSD for the OS and run the other disc as is so as not to have to transfer data or reload data currently on his disc...............

Is this possible?
Is there a better way?
If I load the OS on the SSD how do I get rid of it on the other HDD without FUBARing the data?
 

Answer:Advice needed, setting up new computer,saving data.

So you want to run the game off of the 200GB (old) hard drive and have the OS loaded on the SSD?
 

10 more replies
Relevance 46.74%

I have setup excel pie charts whereby I only want the data label option “percentage” to be shown. If I save the workbook with these settings, close and then re-open the settings are retained.

When I then upload this workbook to my SharePoint 2007 site and select open, open snapshot in excel the workbook opens, but all other data label options are set such as series name, category name, value, as well as percentage (percentage option is all I want, and the only one i set).

If I choose the option “open the workbook in excel” the data label options are set correctly. I need to be able to open the workbook as a snapshot, with the correct data label options because the other option to simply open in excel through SharePoint strips out all the formulas which reference particular data.

The odd thing with this is that if I open the snapshot in Excel 2007 the correct data label options are retained (series name, category name, value) are unticked, which is how I set it.

I tried re-building the excel workbook again in excel 2010, but I’m having the same issue.

I tried with a simple pie chart and the same happens.

We are using Excel 2010 X86 SP1 and SharePoint enterprise server 2007

Any help would be appreciated.
 

More replies
Relevance 46.74%

A recent hardware/software error leads to error status: 0xc000000f

As I understand it F8 takes me to the HDD recovery mirrored on D: with the option of restoring Windows.

Is it possible to save/back up files on C: when having to resort to this?

All data on D: is presumably safe?


The problem arose after picking up the Malware package Windows Vista Total Security which led to a system shut down (blue screen) before I could restore Vista to its previous state and while I was running the AV software to see if it could remove this malware.

Answer:Satellite P200D - Restoring Windows and saving data on C:

When you start HDD recovery installation the whole C partition will be formatted and recovery image installed. What you must do is to save all your important data from C to some external device or just remove it on partition D.

All data saved on D will be there. HDD recovery image will not format partition D.

2 more replies
Relevance 46.74%

I'm using Win'7, with MS Outlook 2007 on a C2D PC.
I would like to save the data of Outlook '07 in my personal folder instead of the default location. Kindly help.
Thanks in advance
 

Answer:Saving Outlook 2007 data in personal folder

Are you asking that you would like tha move your PST file from it current location to adifferent folder that you have?
Tell use where you would like to move the PST file to?
 

3 more replies
Relevance 46.74%

I sometimes (today/tomorrow) need to fill some internet forms (html/css - not pdf), and to either save them for submitting later, or to send them to someone else to submit. One option would be print them as pdf, but it would be easier if I could save the forms in such a way that I, or another person, could later import the data directly back into blank versions of these forms in an open browser.

Anyone know how?

(I use Firefox, but also have IE).
 

More replies
Relevance 46.74%

I have an excel file with the current scenario:

A12 - this cell uses a CONCATENATE formula (from other cells) to create a directory structure and file name (example- C:\project\vendor\41576_info.txt). The directory structure already exists. The the *.txt file does not exist.

I would like to use a VB macro that will create the new text file in the specific directory and add any content in cells A13:A17 to the text file. Any suggestions on how to do this? Thanks in advance

PS - I did try to look through previous posts but the search function was retuning errors.
 

Answer:Solved: Saving Excel Data to a text file

6 more replies
Relevance 46.74%

Hi,

I have a laptop drive that was running Windows XP. with a password protected user account. I have hooked the HDD up to another pc running Windows XP, to copy my files over. The problem lies with the the user account i am trying to access, it says folder is empty, and when i try to open the folder of my old user account it just says access is denied. How do i remove the security from this folder so i can access my data files??

I know that if i had not put a password on my user account , i would not have any problem accessing my files inside. Please, can someone help with a solution??

Thanks
 

Answer:Solved: Saving data from a failed windows drive???

Take ownership of the folders and files

http://support.microsoft.com/kb/308421

.
 

3 more replies
Relevance 46.74%

I have setup excel pie charts whereby I only want the data label option “percentage” to be shown. If I save the workbook with these settings, close and then re-open the settings are retained.
When I then upload this workbook to my SharePoint 2007 site and select open, open snapshot in excel the workbook opens, but all other data label options are set such as series name, category name, value, as well as percentage (percentagewhich is all I want, and the only one i set).
If I choose the option “open the workbook in excel” the data label options are set correctly. I need to be able to open the workbook as a snapshot, with the correct data label options because the other option to simply open in excel through SharePoint strips out all the formulas which reference particular data.
The odd thing with this is that if I open the snapshot in Excel 2007 the correct data label options are retained (series name, category name, value) are unticked, which is how I set it.
I tried re-building the excel workbook again in excel 2010, but I’m having the same issue.
I tried with a simple pie chart and the same happens.
We are using Excel 2010 X86 SP1 and SharePoint enterprise server 2007
Any help would be appreciated.

More replies
Relevance 46.33%

Hi, got this dreaded screen on my Vista machine, have run through all the fixes on the net (literally all of them), which completed correctly, yet I still have the issue. I'm therefore resigned to a fresh reinstall, however before I do that I want to partition my drives so I dont lose any data.

I have a copy of Partition Commander 11 from work that I'm going to try, but I'm not too sure I'm doing the right thing here:

Basically I want to boot with that, so I can split my C: (which has 110gb free and about 40gb of data), into another partition, but without touching the 40gb of data thats already there? Then install Vista to the new partition, boot from that, and recover the data I want to keep from the 40gb?

My setup is like this currently

1 logical drive

C: 150gb capacity, 40gb used - roughly 5gb I want to keep)
D: (data partition, with videos/photos, all of which I want to keep)


Is this possible, or am I being a complete noob?!

Answer:[SOLVED] Bootmgr error, saving data using Partition Commander?

Hello and welcome to TSF, cockneyred83!

Lets focus more on your 'dreaded screen' if you don't mind - was it blue? Was it a BSOD?

12 more replies
Relevance 46.33%

I AM USING THE FOLLOWING CODE FOR GETTEING MY INVOICE DATA COPY TO AN OTHER SHEET OF EXCEL ON CLICK ON SAVE BUTTON BUT IT IS TAKING EMPTY CELLS AS WELL AND WHEN I PRESS THE VIEW BUTTON AND SELECT ANY PRIVIOUS INVOICE NO. THAN I GET WRONG DATA IN INVOICE FIELDS PLEASE HELPPrivate Sub CommandButton1_Click()Unload UserForm1End SubPrivate Sub CommandButton2_Click()Dim RowStart As LongDim RowEnd As Long'Find rowsRowStart = Sheets("Invoice data").Columns("A").Find(ListBox1.Value, _ SearchOrder:=xlRows, LookAt:=xlWhole, SearchDirection:=xlNext, _ LookIn:=xlValues).Row RowEnd = Sheets("Invoice data").Columns("A").Find(ListBox1.Value, _ SearchOrder:=xlRows, LookAt:=xlWhole, SearchDirection:=xlPrevious, _ LookIn:=xlValues).Row + 1'Clear rangeSheets("Invoice").Range("B15:L45").ClearContents'Copy valuesSheets("Invoice").Range("B15").Resize(RowEnd - RowStart, 4).Value = _Sheets("Invoice data").Range("D" & RowStart & ":L" & RowEnd).ValueSheets("Invoice").Range("J5").Value = Sheets("Invoice data").Range("B" _& RowStart).ValueSheets("Invoice").Range("L3").Value = Sheets("Invoice data").Range("A" _& RowStart)Sheets("Invoice").Range("B8").Value = Sheets("Invoice data").Range("C" _& RowStart)Sheets("Invoice").Range("C10").Value = Sheets("Invoice data").Range("J" _& RowStart)Sheets("Invoice").Range("E10").Value = Sheets("Invoice data").Range("H" _& RowStart)Sheets("Invoice").Range("k15").Value = Sheets("Invoice data").Range("K" _& RowStart)Unload UserForm1End SubPrivate Sub CommandButton2_D... Read more

More replies
Relevance 45.92%

Hello,
I have a laptop with a fresh install of Win7 Pro 64bit dual booting with Ubuntu (also a fresh install). I have a a shared data partition that I would like to send all of my documents,music,videos,etc. to by default. My shared data partition is formatted NTFS. This is my first dual boot attempt and I have never had a separate shared data partition. Is there a way to set Win7 to use the shared data drive to save my data?
I have no data saved so there are no files to transfer yet. I was hoping to set a place before moving data from my old XP desktop via a portable HDD. I will be moving my old data only, no system or OS settings.
Any help is appreciated! So far both OS's seem to be working well in their OS partitions. Below is a little more information if it helps. Thanks again.

OS: Win7 Pro 64bit / Ubuntu 64bit 14.04.1
Partition Information: Win7 Pro & Shared Data are NTFS format
Ubuntu is formatted EXT4
Partition Sizes: 256GB Win7 Pro & 200GB Ubuntu & 400GB Shared Data Partiition (the rest is Windows
recovery partition and Ubuntu swap partition. 1TB HDD 5400RPM WD
Additional Software: (not installed yet) Microsoft Office 2013 Professional
Browser: Firefox
Antivirus: (installed) Norton Security

Answer:Fresh Win7 Pro Install-Saving All Data In Shared Partion-(Not C Drive)

You can link the data folders to the related Library - Include a Folder - Windows 7 Forums
and then set that folder as the save location if you want: Library - Set Save Folder - Windows 7 Help Forums

Another method you can try is to move User folders (Documents, Music, etc) to the data partition as shown in User Folders - Change Default Location.

2 more replies
Relevance 45.1%

I think I may have asked this question before, but here goes.

I'm upgrading from Windows XP to Vista (probably 32 bit, I haven't heard of any major advantages of 64 bit), but I have a bunch of stuff I want to save. How do I go about doing this, exactly? Does a default Vista Disc (I have a "restore" disc that came with a laptop) have an option to just upgrade, or do I need a specific disc?

Answer:Upgrading- How do I keep my data?

I'm not sure how to do this, but I would do lots of homework before you upgrade. I bought my new laptop with Vista on it, but later bought an new XP license to go back to what I know works - but no dice.

I am hoping to learn a lot about Vista that will help me to get this computer running right. I would be happy if it worked half as good as my old machine.

Good luck to you!

7 more replies
Relevance 44.69%

I had recently upgraded to Windows 10. Earlier, I was using Windows 8. After upgrading to windows 10, I had lost all my previous data which is really useful for me. Please tell me how I can recover my deleted data.

Answer:Please Help!!!! Data Lost while upgrading

All files of any importance should have at least 1 backup copy while those of particular importance should have 2 or more backup copies. Backups are particularly important before doing something like an OS upgrade. Backups need to be made before you have a problem as after may be too late. Data recovery is often problematic and cannot be relied on.Sorry I cannot help with recovery as I have never had the need.

4 more replies
Relevance 44.28%

I have a form to update the hardware of a PC for an asset database (see image attached), it features a main form which shows the current information for that computer and a subform which creates a new record for that PC with all the new information. The problem is that when i enter new information into the subform and click onto the main form it automatically creates and saves the new record which is what i want to stop.
I would like the subform to save/cancel the data entry through the save and cancel buttons i have rather then it creating a new record automatically.
Any help would be appreciated.
 

Answer:Solved: Microsoft Access 2007-2010: Stopping Automatic Saving On Data Entry Form

8 more replies
Relevance 44.28%

As I contemplate taking the upgrade offer, to upgrade from 8.1 to 10, I have been doing some reading here in regards to the upgrade process. Since I am not changing out motherboard, I would prefer to try the upgrade first rather than the pain of a clean install.

Anyway, I have 4 physical drives, one of which has three partitions. Two SSD's ( One has Windows and programs, the other games), and two hard disks that have data on them.

I guess my thinking is, by doing the upgrade route, it will preserve everything that I have installed for Windows 10, like all my games along with their settings.
Now in reading the Windows 10 Upgrade installation tutorial thread in the forum, is states:






2. Temporarily disconnect all non OS hard drives until Windows installation has finished. This is to avoid Windows Setup from installing files on other hard drives by mistake.



So I was thinking I could just leave everything connected as is, and the upgrade would retain the appropriate drives and data on them. By disconnecting, how is it going to do that?
Or is this referring more to doing a clean install? I know whenever I do a new system build, or replace the motherboard, that is what I do, just have the C drive connected.

Thanks for any tips, just trying to wrap my head around everything in preparation for when I do the upgrade.

Answer:Question on upgrading data retention

From my experience I never have unconnected my secondary drive(HDD) when I update the OS on my primary(SSD) and I've never encountered any issues with the drive and the data on it. When done the data and drives are there and the letters that were assigned are the same.

Just my experience,,
Jeff

3 more replies
Relevance 44.28%

I have the latest build on my Lumia 925. I use Family Mobile as my service provider which uses T-Mobile towers. Has anyone heard of data issues since upgrading? My phone service works fine and I can get data via WiFi but that's it. Thanks.

Answer:No LTE data since upgrading to Windows 10 Mobile

Had my phone updated an hour ago. I can't even have stable HSPA/HSPA+. Resetting and using manual APN configuration didn't help.

5 more replies
Relevance 44.28%

I went from Win XP PRO to Vista Ultimate last week and was shocked when my music collection on two Seagate 1.5TB discs wasn't recognized.I must initialized the discs and lost all data on them or is there some other solution !!???
I'm desperate.

Answer:Data lost upgrading from XP to Vista

Hi and welcome to the forum. Did you do an upgrade or new installation? If you did a new install(clean install) you wil have lost everything. If you did an upgrade, then try a search for the files first, if not there go to help and try and get your answer. If no luck then come back here and someone willtry to help

9 more replies
Relevance 44.28%

My system install of build 10162 won't activate, as they pulled the validation from these builds. Unfortunately, I can't upgrade to 10240, which can, I was told by Windows support, be activated. This is because Windows isn't already activated!!! (Windows Update won't download it (it always stays at 0% )).

To solve this, I want to upgrade manually and thus I flashed the ISO on a blank USB stick. Can I keep all my data and app settings, etc. if I upgrade using the ISO on the stick? Or, in other words, is it possible to "upgrade" when installing an ISO, or do I have to do a clean install?

Many thanks!

Answer:Can I keep my data & app settings when upgrading from a USB stick ISO?

If you so choose you can keep everything even with ISO upgrade. Mount ISO somewhere, I prefer USB, doesn't have to be bootable, and click on setup.exe. it will ask you which way to upgrade.

4 more replies
Relevance 44.28%

Hi,
The Windows 10 upgrade app tells me that Windows 10 has arrived on my PC, I just have 1 question away from upgrading : Will I lose login data (cookies) on browser app (especially Chrome & Firefox) and other app (Steam and Origin for example) or those login data keeps intact after upgrading to Windows 10?
I currently logged in on few dozens sites and it's kinda a hard work if I have to relogin on those sites.
Thanks in advance.

Answer:Upgrading to Windows 10, About Login Data

Install the add-on Password Exporter, then you can export your passwords to a CSV file and restore them after the upgrade.

I am not sure if your cookies and logins carry over with Firefox and Chrome or not, though.

3 more replies
Relevance 44.28%

Recently I have gotten hold of 4 2 TB HDD's and want to put them into my PC.
My PC at the moment has 2 500GB HDD's and I am sick of having to store my data on other network PC's, Flash drives and DvD disks.
SO what I wanted to do was remove my current HDD's, throw in the 2 TB HDD's and set up raid 0 stripping. But I also want to somehow get all the data from my old HDD's and put them on my new PC. This is very important because some of the programs on my old PC can't be reinstalled due to a loss of CD keys and CD's, and updating all my programs would require me to use 2 months worth of bandwidth.
To add to the complication I am going from 32 bit vista premium to 64 bit ultimate to make use of my 8 GB of RAM which I am currently only using about 3 GB of atm.
Could Anyone link me a step by step guide of transferring my old data onto a new PC as if it were installed? As in all registry files copied over and every program thinks it has been installed. For updating purposes I can't just copy + paste them into a new PC, registry and pathing won't allow for it.
Unfortunately I don't have another PC capable of using 3.5" HDD's, my only other PC's are all laptops...
Sorry if this seems obvious/stupid, but I have never experienced the process myself.

Answer:Upgrading Vista and HDD's but want my current data.

If you were using the same OS (32 bit) you could just clone over your old HDD to the new striped set and it would do a mirror copy but have lots more room. But since your upgrading to 64 bit then that will not be possible without reinstalling each program. However you can copy your music, photos, and text documents.

2 more replies
Relevance 44.28%

I have currently got an old 320GB hard drive with Windows 7 32-bit installed. I would like to upgrade to 64-bit, but at the same time I don't want to lose all my files, settings, drivers etc. Is there any way to upgrade and still keep all the settings, drivers and files?

Answer:Upgrading to 64-bit Windows 7 without losing data?

Is it possible to also keep the programs with that program?

2 more replies
Relevance 44.28%

my data will lose after upgrading to windows 10

Answer:my data will lose after upgrading to windows 10

Bit vague! Not if you back it up it won't.

1 more replies
Relevance 44.28%

As I contemplate taking the upgrade offer, to upgrade from 8.1 to 10, I have been doing some reading here in regards to the upgrade process. Since I am not changing out motherboard, I would prefer to try the upgrade first rather than the pain of a clean install.

Anyway, I have 4 physical drives, one of which has three partitions. Two SSD's ( One has Windows and programs, the other games), and two hard disks that have data on them.

I guess my thinking is, by doing the upgrade route, it will preserve everything that I have installed for Windows 10, like all my games along with their settings.
Now in reading the Windows 10 Upgrade installation tutorial thread in the forum, is states:






2. Temporarily disconnect all non OS hard drives until Windows installation has finished. This is to avoid Windows Setup from installing files on other hard drives by mistake.



So I was thinking I could just leave everything connected as is, and the upgrade would retain the appropriate drives and data on them. By disconnecting, how is it going to do that?
Or is this referring more to doing a clean install? I know whenever I do a new system build, or replace the motherboard, that is what I do, just have the C drive connected.

Thanks for any tips, just trying to wrap my head around everything in preparation for when I do the upgrade.

Answer:Question on upgrading data retention

From my experience I never have unconnected my secondary drive(HDD) when I update the OS on my primary(SSD) and I've never encountered any issues with the drive and the data on it. When done the data and drives are there and the letters that were assigned are the same.

Just my experience,,
Jeff

3 more replies
Relevance 43.87%

yesterday i was update my 8.0 os to wp 8.1 cyan firmware but i cant restore my data(including app data, calendar etc.. plz give me a solution

Answer:How to restore phone data after upgrading to wp cyan

Unless you did a hard reset you shouldn't have lost your data in the first place...
If you hard reset your phone and didn't backup your data prior to doing it then it is gone and there's no way to get it back.
If you don't use the same MS account to log into your phone as before then you don't get the contacts, calendar etc.
Can you tell us what you did exactly?

2 more replies
Relevance 43.87%

If I want to replace my existing hard drive with a new, larger capacity drive, can I simply use a program like Norton Ghost or Acronis True Image, create an image of my existing hard drive onto an external USB hard drive, remove the old hard drive, install the brand new hard drive, and restore the image to the new drive? Is it as simple as that, or will that not work?

What about restoring an image made from an old computer to a brand new computer? I'm thinking that wouldn't work, because all the hardware would be different, and would conflict with the settings on the image file.
 

Answer:Upgrading to a new hard drive - preserving data

It is actually easier than that. Just connect your new drive as a slave to the existing drive. Do not partition or format the new drive; install it just like it is straight out of the bag. Boot with the acronis boot cd and choose clone drive. Choose the old drive as the source and the new drive as the destination. Acronis gives you the option to resize partitions or leave them as they are; choose which option you want. When the cloning procedure is finished DO NOT REBOOT. Just shut down and remove the old drive. Put the new drive as the master and now restart.
 

2 more replies
Relevance 43.87%

Hi All,I'm upgrading to a new MB and CPU, but I'm worried that my RAID-0 data won't survive the upgrade, especially since its a different MB and RAID chip.Any recommendations? I can't really backup the raid to anywhere else.What happens when you plug an existing raid array into a new controller? Is the data recognized?thanks,proto2010

Answer:Upgrading MB/CPU, will current RAID data survive?

PS: I do plan to reinstall OS, just worried about maintaining existing data on RAID-0.

3 more replies
Relevance 43.87%

Hi. I am currently using 7068 build. So, my question is if i will upgrade to the latest build, will my installed programs and games after upgrade still work, or all my data on the system partition will be lost.
Regards,
Shady

Answer:Question about upgrading(latest build) and my data

if your software works now, it should work after the upgrade.

i've upgraded in the past, and most things worked ok, except my tweaked services had to be retweaked, and i had to reinstall punkbuster. i also had a problem with daemon tools after the upgrade, but someone on this forum quickly told me how to fix it.

all your data should be ok too, but it wouldn't hurt backing it up onto a seperate partition.

however, as the latest build is the RTM, it's advisable to do a clean install...it's up to you...

good luck, and enjoy your new OS!

4 more replies
Relevance 43.87%

So basically, I upgraded to windows 10, and I found that a lot of my documents and photos were gone! But I luckily found them under this pc > local disk (c) > users > public so I decided to move those files to "this pc". But the next day, those files were gone again, and I hoped to retrieve them by restoring windows 7 back to my computer, but unfortunately, that did not help. Do you guys have any idea how to retrieve back my files? Thanks so much!!

Answer:How do I retrieve lost data after upgrading to windows 10?

Check in drive C > windos.old folder
There's a chance the files are there
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

3 more replies