Computer Support Forum

use tv speakers and computer speakers at same time

Question: use tv speakers and computer speakers at same time

How would one go about using both regular computer speakers and speakers on a tv hooked up with a hdmi cable. They work independently but not together.

Relevance 100%
Preferred Solution: use tv speakers and computer speakers at same time

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: use tv speakers and computer speakers at same time

I am pretty sure that cannot be done without a 3rd party program.

1 more replies
Relevance 104.14%

Using a 3.5mm stereo mini phone plug to RCA jack adapter I have managed to connect my comps sound to the radio and it works. However, due to a fit of stupidity I have overlooked the fact that only either the radio's speakers or the computer's speakers can be connected to the computer's sound output at once.

I am wondering if its possible to have both my radio's speakers as well as my computer's speakers play at the same time because I would like to achieve a surround sound effect because of the way my room is made. My computer has a jack slot behind that looks like " (<-->)" , almost like that ordinary output one which looks like "(<-). Can that be used as an output slot as well? Cuz when I tried putting the radio into the (<-->) slot and the comps speakers into the (<-) or vice versa, only the one put into the (<-) will play.
 

Answer:How to make radio speakers and computer speakers play at the same time?

Go get a splitter. I have my audio output setup using a splitter and it works fine. You can hook up both devices to the 1 output jack on your pc.

http://www.weisd.com/store2/CABAUD-3000.html
http://www.proporta.com/F02/PPF02P05.php?t_id=1193&t_mode=des
 

3 more replies
Relevance 92.66%

Hello,

I am currently working on a homemade project in my free time called Project Surround. I am trying to get a full surround sound setup in my room. I have 2 wired speakers in the front and a Bluetooth speaker in the back. The problem is I need both the wired and Bluetooth speakers to play at the same time. Any way I can do that?

Answer:Play Audio from Wired Speakers and Bluetooth Speakers at the same time

Windows only allows one default audio playback device, thus unless you can find some third party app that will allow both, you won't be able to do that. You will need a full surround PC sound system.

2 more replies
Relevance 85.28%

I had a home theater system I bought for a couple hundred bucks with the Dolby 5.1 speakers.

The CD/DVD player on the Home theater system broke after a couple of years. Not a big deal as it wasn't real expensive. Anyway, I went out and bought another cheap one.

Well, now I have these 5.1 Dolby speakers that sound great (I'm only a minor audiophile) to me. I went out and got a Creative Live 24 Bit 5.1 capable sound card.

It is worth mentioning that the 5.1 speakers each had there own individual port on the home theater system. In other words, while the Creative sound card has three output for the 5.1 system, the speakers I want to convert don't have the kind of set up right now to accomodate this.

Does anyone know how to transform 5.1 home theater speakers to 5.1 sound card with 3 sound outputs on a Create Live computer capable speakers? I can't imagine this has never been done before.

Thanks for all your help in advance.
 

Answer:Transforming 5.1 Home Theater Speakers to 5.1 Computer speakers

If the amplifier has RCA input jacks for channels, you could just use three regular 3.5mm stereo jack - 2 x RCA cables, just connect them correctly.

Another alternative, if the option is available, is to use S/PDIF, but then you wouldn't get multichannel sound from games (lack of Dolby Digital encoding).
 

1 more replies
Relevance 83.64%

I just changed from Bose Companion 3 speakers to Companion 5 because the 3 died. The 3 system used a stereo jack plugged into the headphone jack and worked fine until the Bose power supply(?) failed. The 5 uses a USB to connect.

I have an HDMI cable from my TV set top box to computer. Selecting the HDMI input shows only full screen TV display on computer. Also there is a coax cable from set top box to TV tuner card in computer. This allows TV to be displayed via Media Center in an adjustable window and I can open other windows (a browser, for instance) simultaneously. I choose which connection to use on my computer.

Previously with the Companion 3 speakers all sound came from them no matter the source. Now with the 5 speakers the HDMI TV source the sound comes from computer speakers not the Bose speakers. But if I play my music files (using Media Player) or TV (using Media Center) the sound does come from Bose speakers. Also sound from internet (YouTube, news videos, etc.) comes through Bose speakers.

Maybe someone has had this problem and knows a solution.

Answer:Some content from computer speakers and some from external speakers

I'm confused on where you plug in your hdmi set top box. Into your DISPLAY directly using and HDMI in port or some other HDMI in on your PC (like a graphics card?)

Also you have external computer speakers? do they plug in to your pc analog style? I know you said the Bose 5's are with usb.

8 more replies
Relevance 80.77%

I hooked up a pair of wireless Rockefish speakers via USB and they work fine but it cuts out the regular line out speakers that came with my computer. Is there anyway I can run both pairs simutaneously.

Thanks,
vlindell
 

Answer:usb wireless speakers cut out computer speakers

No. You can only select a single audio device as the "default audio" source. In your case, that would be the standard audio chipset (to use the line out) or the USB chipset for the wireless speakers.
 

1 more replies
Relevance 75.03%

This is what I heard. You can use matrix mode and when playing music, still get sound from all 5 speakers without a 5.1 card
 

Answer:Logitech Z5300 speakers: Doesnt require 5.1 sound card to run from all 5 speakers?

16 more replies
Relevance 75.03%

Once I plug my headphones in or my hearing aids bluetooth device in, it all goes south. The internal speakers continue to work as does the bluetooth, but nothing is coming out of the headphones. Since I was once in IT, this problem is unique to the jack itself. Either the jack lifted up or was pushed back and never properly tested. The hook, I just received this computer 3 weeks ago to replace a faulty HDMI out port. I was told that there would be an open ticket so if I had any problems with this computer it would be attended to. Unfortunately, that is not the case. 

More replies
Relevance 75.03%

With Dell Support Assist microphone test -- earphone playback is good, on-board speaker is terribly scratchy. The sound card lists as "ATI high Definition Audio Device" and "IDT High Definition Audio CODEC."
The laptop is Dell Studio 15 (1555) running windows 7 Professional, 236GB used, 214GB free space, Intel P8700 2.53 GHz Processor, 64 bit OS, 4GB memoryThe built-in speakers used to sound good but now they are too scratchy to understand. However the headset and external speakers (both 3.5 mm jack interface) sound good and a HDMI connected projector sounds good.
I will appreciate advice.

Answer:On-board speakers are scratchy but external speakers & headphones sound good?

Hello. As a test, switch from the IDT audio driver to the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "IDT High Definition Audio Device".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.[To get back to the IDT driver, do it again but reverse the names in steps 2 and 7.]
If you get the noise while using the native driver then it is not a driver issue, which would mean there is a strong chance of speaker failure, particularly since the noise is not in headphones. If you would like to replace the speakers I can point you to the service manual.

1 more replies
Relevance 75.03%

I recently reinstalled Windows 7 on my laptop and since then the speakers are squeaky and muffled, unlike he sound I had before with my Harmon Kardon speakers. I also note that the speaker properties say Realtek High Definition Audio. How can I fix this problem? Appreciate your help

More replies
Relevance 75.03%

I cant get these things to work together I think I just dunno what Im doing..

Installed my PCI card and setup my speakers and plugged em in etc.. Installed the drivers for 7.1 sound as the instructions suggested for me to do, even though my speakers are actually 5.1 (Logitech X-530) wonder if thats whats wrong...anyway

now my woofer works and so do my front two speakers but my other 3 are left out..what to do?

Thanks all!
 

Answer:Chaintech AV710 Sound Card and Logitech 5.1 Speakers: only 2 speakers work

I'd say install the 5.1 drivers and be sure the speakers are plugged into the correct ports
 

3 more replies
Relevance 75.03%

T61 Lenono gets paired (using Bluetooth adaptor) with SW50 Bluetooth Speakers but the sound does not come from the speakers when palying music. OS: Windows XP Prfessional SP3T61 Lenono Thinkpad Can anyone help pls.

Answer:T61 Lenono gets paired with SW50 Bluetooth Speakers but I cant get sound coming from speakers

Hello Vivek_230!
 
Welcome to the Support Forums!
 
In the Control Panel window find Sounds, Speech, and Audio Devices section and open it. Then select the Sounds and Audio Devices. A new Window should open, select the Audio tab (top line of buttons) and click on it.
In the Sound Playback section: from the drop down menu, are your Bluetooth Speakers listed as the audio output device?





Thank you for being a part of the Lenovo Family,Catie--------------------------------------------------------------------------------Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Donate KUDOS and Click "Accepted Solution"

7 more replies
Relevance 74.62%

Help!
My external speakers work but my internal ones stay muted.  I have re-installed all drivers (Realtek) & problem won't go away. Also tried system restore & system scan shows no problem. 

Thanks

Dell  inspiron 7737OS Version: Microsoft Windows 8.1, 64 bitProcessor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz, Intel64 Family 6 Model 69 Stepping 1Processor Count: 4RAM: 16282 MbGraphics Card: NVIDIA GeForce GT 750M, -2048 MbHard Drives: C: Total - 952889 MB, Free - 497561 MB;Motherboard: Dell Inc.,Antivirus: Norton Security, Updated and Enabled

Answer:Internal speakers stay mute when external speakers disconnected

Hello. After you re-install the Realtek audio driver, run the audio test in the ePSA diagnostic. If you cannot hear tones during the test, then the speakers have failed or become disconnected. If you do hear the tones then the speakers are okay.
You can test the driver by switching it with the Windows native driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked [but SEE NOTE].7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, sometimes you have to restart, sometimes not.[To get back to the Realtek driver, do it again but reverse the names in steps 2 and 7.]NOTE: if you have a 2-in-1 model and do not see a "High Definition Audio" option after step 6, then uncheck "Show compatible hardware". Then in step 7, if you see 2 "High Definition Audio" devices, select the 2nd one.If you only have the symptoms with one of the... Read more

1 more replies
Relevance 74.62%

Hi!

I have L500-13T(PSLJ3E) with 32 bit Vista.

When I connect external speakers, the internal speakers continue to play. So I have sound on both. Other laptops turn off the internal speakers when an extenal one is connected.
How to make the L500 also do the same?

Regards,
David

Answer:Satellite L500-13T - External speakers do not mute internal speakers

First try updating the BIOS to the latest version.

Also check the Sound Settings in Windows - perhaps you can configure this 'feature'.

Also check the HDMI settings, and have a read of the Users Manual.

4 more replies
Relevance 73.8%

I have a pair of Creative T40 speakers plugged into the 3.5mm jack on my laptop. I got hold of a bluetooth speaker and that was recognised straight-away.

I have installed a large monitor (32inch) to the laptop on which I work as well as watch movies and play games. I was wondering if I could setup that audio, be it music, gaming audio or movie audio could be played through BOTH sets of speakers.

The main T40's are on either side of the monitor and I have the bluetooth speaker behind me on a shelf. That would, kind-of, give me surround sound. Or when I have people over I could get better sound if I could just move the bluetooth speaker to a different part of the room.

Any ideas or suggestions?

Thank you.

More replies
Relevance 73.8%

When I plug external speakers on my Qosmio x770-135 the internal speakers don't turn off.
Can someonee help me?

Answer:External speakers do not turn off Qosmio x770 speakers

You may check the Realtek HD Audio Manager in the Control Panel.
In the top right corner, there's a little yellow folder called "Connector Settings?.
There, you could enable the setting "Enable pop-up dialog, when device is plugged in".
Now when you plug in an external speaker or headphones, it pops up and I select the option "headphone" (instead of "line-in"), and then the sound comes out only through the headphones/ext.speaker.

3 more replies
Relevance 73.8%

A week ago a bubble popped up on my desktop offering to clear space because i was running out of memory on my computer. I clicked it (shouldn't have) and it "cleared space" but now my computer won't play any sound. i have Dell speakers and they work fine because i can plug them into my ipod and play that. I already did the Control Panel-Sounds and Audio Devices-Audio tab but once I get to the audio tab this website tells me to click "Advanced" under "sound playback". However, I don't even have the option of clicking that button. it won't let me click it. Also, there is no Volume control icon on the bottom right corner of my screen (next to the clock). like there should be. I really need help

Answer:Speakers not working...has to do with windows actual speakers are fine

Go to control panel - open sound Icon - put a check mark in the box.Place Volume Icon in TaskbarWindows XPSee if your sound has been stopped in Services Under Windows Audio.Start - Control Panel - Open Administrative Tools - Open Component Services - Click Services (Local) and Scrowl down the list to Windows Audio to see if it says - Started. If stoppedLeft click Windows Audio and click restart. - OrRight click Windows Audio - left click Properties - Left click Start If the above doesn't work, go to control panel and open System Icon - Hardware Tab - Device Manager - Click the + Plus sign for Sounds.......... -Right click Realtek AC 97 (Or whatever Sound you have) - Left click - Update Driver.To update you will need the CD that came with your computer If you have the CD that came with your computer you should be able to install your sound drivers.

1 more replies
Relevance 73.8%

I recently got a new HP zBook 15 with the slim docking station and am experiencing an issue related to the speaker output. If I plug my external powered Bose speakers into the line out of the docking station I get sound out of both the external Bose speakers and the internal laptop speakers at the same time. In addition the sound from the Bose speakers sounds horrible...tinny and completely lacking any bass. If I plug the Bose speakers into the headphone jack on the side of the laptop (not the docking station) then I get great sound and ONLY the Bose speakers produce sound (which is what I want). Is there a fix to get only the external speakers to play when plugged into the docking station audio out? I've uninstalled and re-installed the Conexent ISST Audio drivers twice...no change. I've tried messing with the B&O Sound Control panel, but it doesn't have any configuration for the audio ports. I've messed around in the Windows Playback devices control panel, but can't seem to find a way to shut off the internal laptop speakers. FYI, this is a fresh install of Windows 10 Pro. All Mircosoft updates installed. All HP updates installed via the HP Support Assistant. Latest laptop BIOS installed. Help! The sound output sounds HORRIBLE through the docking station. There must be a fix.

More replies
Relevance 73.8%

hi,
I tried googling and searching your forum for this, and havent really come up with anything, so i thought I would try and ask..
is it possible to use bluetooth speaker and laptop speakers at same time?
I got a hdmx jam for xmas, and wanted to put that behind me, as i game on my laptop. id like to use both the laptop speakers and the hdmx bluetooth speaker at same time on windows 8.1
any suggestions?

oh and merry xmas to everyone too.

More replies
Relevance 73.8%

Hi everyone,

I've been researching and pulling my hair out, and starting to think what I'm after is somehow not possible to achieve.

My goal is to be able to record my screen, my speakers, and my mic (narration), while also being able to playback ONLY my speakers to my headphones.

Basically, I wish to monitor ONLY the speaker audio, WITHOUT my mic (narration).

I thought I could achieve this by using Realtek HD Audio Manager, which allows you to playback two different audio streams simultaneously. However, it would seem that only certain Windows applications which are written to give you the option of changing the playback device can take advantage of this feature. The particular Windows application which I am recording does not give me that option.

So essentially I am wondering if there is a way to force an application to output to a particular playback device, ie. the Realtek HD Audio 2nd Output. The Realtek HD Audio 2nd Output would play to my headphones (application audio ONLY) while at the same time I would be able to record my screen, my speakers, and my mic all together at once.

I did find this post which broke my heart as it seems this might not be possible due to Windows only providing a single mixer, but wanted to try asking around here too -> Different audio output for certain programs [Solved] - Multimedia - Apps General Discussion

PC Info:
Windows 7 Home Premium, Service Pack 1 (64 bit)
Intel Pentium Dual Core E5300 2.6Ghz
6GB RAM
Re... Read more

Answer:Record Stereo Mix (mic+speakers) AND output ONLY speakers to headphone

Windows only allows one default audio playback device. There may be some third party program that will do what you want, but not with the default Windows options.

3 more replies
Relevance 73.8%

I just purchased a HP 2009M monitor and wonder if I could utilize separate speakers instead of the built-in speakers?
 

Answer:Solved: Can I use separate speakers but have built-in speakers in the monitor

Yes; just plug your speakers into the output from your soundcard.
 

3 more replies
Relevance 73.8%

I have two monitors (one VGA and one HDMI ) to the CPU (new XPS 8700), but sound only comes out of the monitor speaker with the HDMI connection.  The other speaker does work and has been tested with a 3.5MM speaker cable.
The video card is NVIDA GTX 745.  In the audio set-up control panel from the NVIDIA, I disabled audio from the HDMI thinking that I could then run 3.5MM cable on a Y splitter to the audio out port and by-pass the HDMI cable.  I tried every port and either experienced no sound or sound in one or the other speaker.
I realize these speakers are not the best and I am fine with them.  I like the clean clutter desktop look.  
Can anyone help me to get both of these monitor speakers working?

More replies
Relevance 72.57%

Hi,

I'm using a Packard Bell laptop, Windows Vista and a Realtek sound card.

I've searched a lot to find how to NOT mute my laptop speakers when I insert something in the audio-out-jack.

The next threads say it's not possible by the hardware:
techspot.com/vb/topic140707.html
techspot.com/vb/topic130170.html
They're closed, so I can't comment on them.

BUT when I dual boot to Ubuntu (using the same hardware), I can easily choose to mute the internal speakers, or the jack, or none at all. So why can't it be possible on Vista?
 

Answer:Same audio through laptop speakers and external speakers

You answered your own question... It's a software/OS issue. If Vista's Realtek options in the Control Panel don't give you the same options as in Ubuntu, you're out of luck
 

2 more replies
Relevance 72.57%

For some reason my speakers aren't getting any power from the computer, I tried them with my other computer, they worked fine. Tried the speakers from my other computer on this one, and they didn't work either.

Any idea what's wrong? I'm guessing the connection inside the actualy computer is loose. Is there an easy and quick way to fix this problem? Or is it not even fixable?

Thanks.
 

Answer:Speakers getting no power, SPEAKERS AREN'T BROKEN.

Where do your speakers draw power from? Is it from usb, or another connector?
 

5 more replies
Relevance 72.57%

I have 2 Samsung TV's hooked up to my PC, as well as a set of speakers. I am able to set the individual sound of each (Volume Control Panel), can set certain programs on a certain TVs or the speakers, I can set any of them as the default, but I can't figure out a way to male them all work at once, having all sounds pass through all three. Is this possible?
 

Answer:How do I make audio come out TV speakers and PC speakers simultaniously

Not that I'm aware. You can only set a single "default" device in Windows.
 

2 more replies
Relevance 72.57%

have had a microsoft tech run thru all updates on the drives . Nothing worked . Message says no speakers or headphones are pluged in. Little Res x

More replies
Relevance 72.57%

i have a pavillion desktop that has internal speakers, i just bought a bose 2 companion sepeakers and want to use it as my default speakers, but there's no sound coming from bose speakers. Bose speakers are plugged in, but sound still coming from the monitor speakers. I have Vista 64 home premium.

Answer:external speakers not working/pc has internal speakers

Originally Posted by jc828


i have a pavillion desktop that has internal speakers, i just bought a bose 2 companion sepeakers and want to use it as my default speakers, but there's no sound coming from bose speakers. Bose speakers are plugged in, but sound still coming from the monitor speakers. I have Vista 64 home premium.



Hi jc,

Welcome to the Forum.

Never seen one of these before, Try right clicking on the speaker symbol in the notification area, select Playback Devices, You should be able to select the speaker device that you want to use.
Right click enable/disable Hide/unhide
Left Click will allow you to configure the device after selecting Configure
Properties will also give you some options

I hope this helps

Pooch

3 more replies
Relevance 72.57%

A weird thing happens when I use my X200 with speakers and then disconnect them. The speakers on the laptop don't emit any sound. It is not on mute and when I go into control panel it seems to use Conexant Audio Output which is really the only one that isn't generic. Any ideas what I need to do ? Thanks

More replies
Relevance 72.57%

My X61 speakers have static sound.  I have the latest driver.  The static sound is from the computer speakers.  Ultrabase speakers are OK.  When I muted, the speakers have no sound.  Any easy fix?  Some people say it may be loose wires inside causing the statics, but I haven't tried to open the computer yet.

More replies
Relevance 72.57%

Hi! Please bear with me ... I will not be using the correct terminology, but hope I explain myself OK all the same!
I have a DELL studio XPS PC With Windows 7. I used to have a DELL screen, with a speaker section attached, which belonged to my previous DELL. (Altec Lansing 5650 5.1 Surround Sound Speakers with Subwoofer set).
I ditched this due to the plastic attachments breaking, and the fact that I could only get sound from 2 of the speakers, not all 4, after changing my PC. I therefore thought it was an unnecessary amount of "hardware" kicking around my desk just for getting sound out of 2 speakers.
So, I bought Creative T15 Wireless (Bluetooth) speakers, although I use the wire directly into my PC due to not having Bluetooth. These worked fine to begin with - OK sound, so not complaining.
Now, I'm not sure whether this happened simultaneously with buying a New screen (a Samsung 24") but all of a sudden I started getting very scratchy noises coming from the left speaker. This noise comes even when unplugged from my computer. I contacted Creative who said that if the speakers work when attached to my ipod/iphone then there is nothing wrong with them:





Quote:
That means the speaker is good. If speaker is faulty, the issue will remain the same no matter as to what device you connect it. Issue seems to be with your computer sound card's audio out. Check the settings in your computer, playback application settings . Reinstall/update the compu... Read more

Answer:Bad scratchy noise from speakers, but speakers OK. No IDE ATA/ATAPI???

Quote:
I started getting very scratchy noises coming from the left speaker. This noise comes even when unplugged from my computer


If I understand that statement, your speakers have the scratchy sound, even when unplugged from the computer. Does this happen if the monitor is powered off? (trying to determine if there is some radiation from the monitor that is affecting the speakers).

7 more replies
Relevance 72.57%

Hello

this is my first post so please excuse any mistakes regarding the protocols of the forum

My neice has a L300 laptop in the control panel - realtek hd audio Manager only shows 1 speaker setup which is for a pair of speakers, she has a set of 2/1 speakers ( 2 speakers 1 subwoofer)

Is there any way I can add or alter so that I can configure the 2.1 speakers.

Thank You

Kevin

Answer:Satellite L300 - Speakers settings for 2/1 speakers

Hello Kevin

As far as I know this notebook doesn?t have subwoofer.

Is external 2.1 system connected to this notebook?

1 more replies
Relevance 72.57%

Hi all,

I have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?

Any advice is welcome!
Thanks.

Answer:External Speakers work, Laptop speakers do not

What do you have set as your default sound device? Mine is set to my external speakers.

9 more replies
Relevance 71.75%

I want to use my headphones for things such as firstperson shooters and my speakers for music. I'm using a Realtek AC97 Audio soundcard. It has Pink(microphone), Green(speaker), and Blue(I assume its for secondary audio output) colored ports in the back with nothing in the front. I've played around with the soundcard settings and the volume control in windows(just to make sure everything is unmuted and turned up all the way), but the blue port doesn't make any sound. Can anyone help me find out how to make this possible without buying a splitter for the working one?
 

Answer:How do I use speakers and headphones at the same time?

Onboard sound is both a blessing and a curse at the same time. Im assuming you are talking about the onboard chip on your board and not a pci card.
Mic - Audio in- and a line out. Its been a while - I think thas close.
I remember I had a ac97 compliant integrated chip a while back.
I didnt have much of a prob with it besides the cpu cycles it ate.
I think you will need some form of pci card (turtle beach or soundblaster) or a soundsystem that offers a port for your headphones with a seperate volume control otherwise your headphones will be blaring the same decibel as your main speakers and be blown apart in a few hours if you do not have an inline volume control on your headset. most models of logitech or klipsich speakers offer headset ports in the main volume control module - however there are much much cheaper options out there then those.


Hope this helps
 

1 more replies
Relevance 71.75%

I think my computers speakers are dying after being in service for than 8 years. I need your helping finding good, affordable, gaming speakers.I say gaming because I don't know if regular speakers are to low or just don't cut it.

My HP computer I bought 2 years ago had free speakers with it but they were sub-par, and are very small and low quality in my opinion.

I currently have Insignia Speakers, any good ones you guys know about?

Also, I have a question. Do sound cards make a difference in desktops? I don't know anything regarding speakers, other than you plug them into the hole with the matching color and they produce sound lol
 

Answer:Time to get new gaming speakers

check this out, http://www.creative.com/products/speakers/usage/?nav=gaming
Creative have the best speakers and they are usually very affordable, i would check around your local tech stores and look for random deals if you want to save even more, i got my 7.1 system for $200 and its still going perfect 6 years later
 

4 more replies
Relevance 71.75%

I recently bought a new headset and desktop. I just tried out the headset and found it to be amazing, but I was wondering how I could get sound to go through both the headset and speakers on my speakers system. The desktop is in Windows 10, and it's a Lenovo, and I can provide the system information if needed, as well as any other information. Thank you for your time and responses.

Answer:Using headphones and speakers at the same time.

Does it have Realtek sound CODEC ? Are headphones analog or USB ?

5 more replies
Relevance 71.75%

I recently bought a new headset and desktop. I just tried out the headset and found it to be amazing, but I was wondering how I could get sound to go through both the headset and speakers on my speakers system. The desktop is in Windows 10, and it's a Lenovo, and I can provide the system information if needed, as well as any other information. Thank you for your time and responses.

More replies
Relevance 71.75%

Hey i have a CMI 8738 PCI 6.1 sound card, and I also have a AC'97 onboard card (disabled at the moment).

Before i got my PCI card, I was able to use my AC'97 with a headset, (aud_out) a mic (mic_in) and a 2.1 sound system (aux_out). The beauty of this is that i can turn the speakers off (because they have a separate power source), and just use the headset when i need to be quiet. Or i can use the speakers when i'm listening and can be loud.

My mic port shorted out, so i got the new PCI sound card.

Now i'm wondering if I can do the same thing on the new sound card. I'm afraid to test it since I don't know the reason my old card shorted out.

I'm using Xear 3D sound with 3-D CMI Audio Controller.
 

Answer:Headphones and speakers at the same time?

ok im confused do u have the speaker system and the headphones plugged into the same port at the same time? are u using a splitter? go a little deeper in your explanation please
 

1 more replies
Relevance 71.75%

I have a headphone jack on the front of my computer. Is there any way I can make it so that I can plug in something in the headphone jack and still have the speakers working?

The reason is I have two sets of speakers and I want to use them both (the second set behind me) and have like a quadratic speaker setup but I only have one speaker port.

I know I can use a Y-splitter on the speaker port but I don't have one and the stores are too far away so I don't feel like going right now. I was wondering if there was a setting on my computer that I could change to allow this.
 

Answer:Speakers AND Headphones At the Same Time

Nope, as soon as you plug into your headphone jack, it's going to disable your rear jacks. The only way I know of is using the "Y" cable you referred too.

Thanks!

Shane
 

1 more replies
Relevance 71.75%

Season's greetings!!

This may have been asked before in the forum (my search didn't show anything), but, for the sake of a more multi-speakered environment, I'd like to be able to hear audio through my laptop speakers as well as through my external amplified speakers at the same time.

It seems silly, I'm sure, but my laptop has a better high end than my old amp'd speakers which have a much deeper take on the audio spectrum, so combining the two balances things out a bit.

I am running a Lenovo X200 Tablet (+ Ultrabase) full spec'd with a Conexant High Definition SmartAudio 221 card. Vista. Let me know if you need more hardware spec.

To be perfectly clear I'll restate what I want from this:
1. To play audio through the internal speakers.
2. To play the SAME AUDIO through the headphone jack at the SAME TIME.
3. NOT to play a separate stream (I do have multistream functionality).
4. NOT to play audio through two separate external devices (which would require a splitter).
5. To avoid the purchase of additional hardware, unless it is some sort of cable.

Just getting some initial confusion out of the way. I've read up as much as possible before posting.

Help! Feel free to be technical; I'm way into the killer advent of computing.

-BerretSO4
 

Answer:Speakers and Heaphones at the same time

6 more replies
Relevance 71.75%

I want to use both headphone and speaker at the same time. Like, the same audio comes from both of them. I want to use this so i can combine my speakers with the TV ( the one i use as monitor ) speakers to work as the 5.1 central speaker.
I googled it, and i only found results where the users wanted to get rid of that.

Thanks,
Alex.

Answer:How do i use both headphones and speakers at the same time?

If you are using HDMI for the TV, you can only have one default audio playback device. Either the HDMI output or your "speakers" (PC sound card) which would allow you to use headphones.

This comes up frequently and I don't recall any posted way to get around this.

4 more replies
Relevance 71.75%

Here's my problem.

I have speaker that I use for music and a USB headset for games.

I'd like to make it so I can just turn the volume down on one and just use the other for what I desire, instead I have to open my sound settings and switch the default every time.

Any solutions?
 

Answer:Trying to run a USB headset and Speakers at same time

ok so u want to be able to listen to music through the headset while your speakers are on as well?
theres the problem
your computer has one audio out (which is hooked to your speakers) the reason the usb mic works is when that out is disabled it goes to your next default, your usb port.
so basically sound can only come out of one place at one time from ur comp.
i hope i helped
-rok
 

2 more replies
Relevance 71.75%

I'm passing my 10-yr-old Sony 27in CRT TV to my old Dad, who's rather deaf. I would like to give him some headphones to use with it (it has a headphone socket) but when you insert the jack, this cuts off the speakers. My Mum doesn't think much of that!Is there any way that I could get the phones and the speakers to work at the same time? The TV has a variety of sockets and interfaces, but I don't really know what they all do. It has two SCART sockets.Thanks for any advice and ideas.

Answer:TV earphones and speakers at same time?

You can get SCARTS with a breakout of the sound cables. These could be wired to the headphones by way of an adapter.You need to look at the SCARTS on the TV and find which is an output (or Input/Output) - there should be an arrow moulded in to tell you.Look here for suitable adapters, or search around Maplins, or the local TV shop.click hereWhich one to use may depend on the headphone connections.

10 more replies
Relevance 71.75%

I would like a usb headset to function at the same time as a pair of speakers. The speakers plug into a 3.5mm jack. And I would also like a microphone, that plugs into a jack, to function at the same time as the microphone on the headset. I have Windows 7. My intention is to allow another person, with whom I am talking on Skype, to hear audio of a video that I will play. There are Youtubes on the subject, but they have not helped me.

I would appreciate any help, thanks.
 

Answer:Using a headset and speakers at the same time

Have you considered using the swap screen function in Skype? It allows the person you're chatting with to view your computer screen and (I could be wrong) hear its audio.
 

1 more replies
Relevance 70.93%

i was wondering if there is a way to play headphones and speakers at the same time?

I just have a standard sound thingy that came with my computer
 

Answer:Playing headphones and speakers at the same time?

not realy unless you're prepared to modify the headset plug.

the plug on the computer has a switch that operates when the headphone jack
is inserted; it disconnects the speakers.
 

20 more replies
Relevance 70.93%

Hey everyone

Recently i had my motherboard fixed and my speaker ports are in a diff place. Vertical instead of horizontal down the bottom (no i don't know much about hardware). There are still the same three holes, pink blue and green, not sure if they were different colours don't think it matters. I've got creative inspire 5.1 5200 speakers
http://www.creative.com/products/product.asp?category=4&subcategory=25&product=55
and only the speakers which are plugged into the top speaker port (green) work.
The subwoofer seems to work no matter which speakers are plugged in but I
can only have the back two, the front two or the centre speaker working at once.
The bottom port is used for the microphone and that works all the time, the middle port doesn't do anything really.
I've tried downloading a bunch of realtek AC97 drivers to get it to work because I used to have one which had a speaker setup tab, and i could change from microphone to surround sound from there:
http://www.fujitsu-siemens.co.uk/rl...ds/Soundcards/Avance ac97 (ms6547)/audio4.JPG
I don't have the speaker config tab on mine anymore, but i do have HRTF demo.


...
........
............... :bounce:
 

Answer:5.1 sound not working - only 2 speakers at a time

activate the surround sound 5.1 function on your sound card drivers
 

4 more replies
Relevance 70.93%

I'm wondering if instead of buying a splitter, I can just have the headphone and speaker playing at the same time.

I have a stereo system that sounds better than the pc speakers, but the bass isn't as good as the pc speaker's subwoofer. All i want to do is be able to plug in the stereo system into the front headphone slot while having the pc speakers plugged into the back speaker slot and be able to play both at the same time.

What would be even better, but probably not possible, is if I could hook the pc speaker's subwoofer up to the stereo system but thats probably a lot of trouble..

Is there a way that I could make the 2 pc speakers and the 2 stereo system speakers be recognized by the computer as a 4 speaker system? again, probably impossible or too much trouble.
 

Answer:How can i play through headphones and speakers at the same time?

You plug the stereo system into the rear channel and the PC speakers to the front channel (or vice versa) - that's what i have set up and it works just fine.

You need to fiddle with your soundcard settings to get it to run in 4 speaker mode.
 

1 more replies
Relevance 70.93%

Hello, from a few days I've a problem with audio devices:  when I connect any headphones to the jack on the left side of the laptop, the sound keeps going out from the  speakers. So, I can hear from headphones and speakers in the same time.  I tried everything: update all drivers, uninstall and reinstall them, uninstal and reinstall DOLBY ADVANCED AUDIO v2 program (which is supposed to control audio on the pc), update IDT High Definition Audio CODEC (I think this is the sound card?). Nothing worked. I have two  devices available in "Audio" window:  "Speakers / headphones" and "Headphiones communications" (I'm translating from italian Windows OS). Selecting the first, speakers and headphones work simultaneously. Selecting the second, no sound comes, neither from speakers or headphones. I think I tried everything. What to do? I don't even know why this problem occurred!   Thanks for the help

More replies
Relevance 70.93%

I plug both my Razer Carcharias and speakers into the back of my computer. I have Realtek HD Audio Manager. There is no individual control for each sound device. They share the same settings and play at the same time when I play sound. My first post on here Thanks for your time.
 

More replies
Relevance 70.93%

Recently I've occurred with a problem. But I don't know how to fix it. My speakers are playing at the same time when i plug in my headphones. So there's audio coming out of both. How do I fix this?

Answer:Speakers and headphones playing at the same time

Hi Shabirah1997 ,
 
 
Welcome to the Community Forums. 
 
Step 1: You may try to set default initially to get back the previous settings. Similar steps on this article .
Control Panel > Hardware and Sound > Sound > Playback tab > Set Default at the bottom > Apply 
 
Step 2 oing a reset on command prompt :
Click on start and search for CMD , right click to run as administrator . type net stop AudioSrv  
then  net start AudioSrv 
 
Step 3 : Jumping back to previous working date with System Restore
 
Step 4: Rollback / Uninstall and Reinstall audio drivers from D:/Lenovo /Drivers folder or download from support site.
 
 
See which one works for you best. 
Update us. 
 
 
Regards

2 more replies
Relevance 70.93%

I'm new to this forum, but I've been having a problem for a while now.

Whenever I unplug my headphones, my computer has absolutely no sound.

When I do plug in my headphones, the headphones AND speakers turn on.

The speakers are built into my monitor, plus they're playing with the headphones plugged in, so there definitely isn't anything wrong with them.

I've tried messing around with Realtek and just a simple restart/shut down, and nothing has happened.

Answer:Why are the speakers and headphones playing at the same time?

when you right clik on the speaker icon in system tray and select 'playback devices', which is set to default?

2 more replies
Relevance 70.93%

My Laptop speakers and earphones are playing at the same time and I've been having this problem since yesterday. This has been giving me headaches just from pure rage because every single "solution" I found online doesn't work for me

I've been told to check playback devices and set headsets as default playback device but it doesn't even show the headset option

Answer:Headphones and speakers playing at the same time

Plus, I've reinstall my drivers and they are up to date!

and On the internet I've also found a thread where they told me to check the Analog Cog settings on realtek but there isn't even an option to do it. The analog device buttons are un-clickable.

Even in the advanced settings on realtek there's nothing but "recording device" settings.

Here's what's on my realtek

2 more replies
Relevance 70.93%

Hello!

I had an issue recently where I upgraded from OEM Vista x86 to Windows 7 Professional x86. There was very little sound coming from the internal speakers. I also had major BSODs from then, so obviously I was focusing my attention on the BSODs as a priority.

That issue has been resolved, however, or, at least, I implemented a workaround - reinstalling Vista. I no longer have BSODs.

The audio, however, is still extremely quiet. I've checked the following:

Went into properties and maximised the 'levels' on everything.

Went into volume mixer and maxed everything.

Went into Devmgmt.msc and tried updating drivers - drivers already up-to-date.

SOMETHING I HAVE NOTICED: I have two internal speakers as well as what I guess is a subwoofer (I'm sorry, I'm terrible with hardware - its icon looks like a box server or something. I'm currently at work so I'll upload screenshots when I get home).
ONLY ONE SPEAKER PLAYS AT A TIME. I can change between the speakers by right clicking and saying "set as default speaker" and that plays sound out of one at a time with no problems, unless I choose the subwoofer(?).

Is there a way to make both speakers play at the same time, instead of just using one of them?

All help appreciated!

Answer:Onboard Speakers Only Play One At A Time

Without knowing what kind of speakers and how they are connected, we can't really comment on the problem. More info is needed.

Normally, if the speakers are connected correctly both to the PC and internally in the speaker system, you can go to the Control Panel/Hardware and Sound and finally the Sound Panel, Playback section. Your "Speakers" should be set as the Default playback device and then you can click on Configure to configure the type of speaker system you have and also test the speakers.

6 more replies
Relevance 70.93%

I have a Soundblaster Audigy 2 ZS soundcard in a Dell XPS 5 with a headphone jack on the front of the box. I want to be able to run an FM signal (send my own music to FM stereos in my home) from a unit that needs to be provided the audio from a headphone jack.

Does anyone know if it is possible to run audio through my speakers and my headphone jack at the same time? Any ideas would be appreciated!!
 

Answer:Sound from Speakers and Headphones at same time

7 more replies
Relevance 70.93%

Well, the title says it all. Using my RTM MSDN version that I got from work this mornin. Have all the latest updates. Not sure what to do.

I have my headphones plugged in but my speakers and headphones are playing my top wicked bad music.

Any ideas people? First time I have used Vista. Looked at all the usual suspects in control panel and volume controls etc.

Thanks
 

Answer:Speakers and headphones working at the same time

16 more replies
Relevance 70.93%

Hello....

When I plug in my headphones, my speakers just keep on playing(although the headphones also play the audio). The headphones won't show up under audio devices, and I've tried two different sets of headphones.

Does anyone know how to stop this? It was working fine yesterday....

I use Windows 7.

THANK YOU!

Answer:Headphones and speakers playing at the same time?

Hello OctoberOwl and welcome to Seven Forums.

Since everything was working fine yesterday I'd try using system restore to return my computer to a date/time prior to when the audio problem first started.

System Restore

If system restore doesn't help you might have to go into control panel > sounds to see what your default settings are. There are several previous forum threads that provide possible solutions. For example:

Speakers and headphones play at the same time?

Selecting headphones or speakers as default

And a couple of threads from the Microsoft Answers forum:

Headphones + Speakers at the same time - Microsoft Answers

Audio playback through headphones and speakers - Microsoft Answers

2 more replies
Relevance 70.93%

My laptop plays audio on speakers and headphones at the same time and I get poor sound quality in the latter. 

More replies
Relevance 70.93%

I have a HP G62 series laptop with Realtek HD Audio Manager and an iSymphony NC1 Headphone with a male to male 3.5 mm cord connected to my audio output jack. The jack on my laptop is loose, but I can still hear sound coming from both sides of the headphones. The problem is that the internal speakers still play and the headphones don't show up on my devices menu or in the Realtek HD Audio Manager. Does someone know anything about how to fix this? Help would be greatly appreciated.

Answer:Headphones and speakers playing at the same time

It would appear from your description that you have a mechanical fault with the headphone jack. When you insert the plug into the socket there is a contact that is switched telling the system that something has been inserted into the socket - this signal is used to switch off the speakers.

As this is a laptop it is probably beyond most PC users to make a repair, although this is possible, I would suggest you contact your local PC repair outfit who will normally be able to replace the socket for a reasonable cost

4 more replies
Relevance 70.93%

hi

Whenever i want to play music or watch a movie in a public place, ill put in some headphones. but right now, whenever i plug them in, i get sound from both my headphones and my laptop speakers. It used to switch automatically from speakers to headphones but it wont anymore.

I have Realtek HD Audio with Vista 64 bit.

Is there any way to get it back to the way it was?
 

Answer:Laptop speakers and Headphones at same time

Go to Control Panel - Sound - and explore all possible settings ("configure" and "properties").

I think the switch is a part of the connection, and something in the headphone jack is loose or broken, but it's worth looking for a setting. I didn't find any such setting on my Vista, but I have a different sound card.
 

2 more replies
Relevance 70.93%

Hi I have got a windows 8 64 bit laptop and just the past couple of days iv had this problem when I plug my headphones in I am still hearing sound coming from my laptop speakers and from my headphones at the same time. At first I thought this was a problem with my headphones so I decided to try different ones but I still had the same problem ( and yes the headphones are fully plugged in). This is clearly a problem with my laptop and not my headphones. I have been to the control panel and tried changing settings with my sound but NOTHING SEEMS TO BE WORKING!. I have also tried doing a system restore but that didn't help either . It would be much appreciated if anyone could help me solve this problem as it is really annoying!. Thanks in advance

Answer:Headphones and speakers playing at same time HELP!

What sound do you have? e.g. Realtek, Conexant, etc?

Realtek has an HD Control Panel and there is an option to mute the speakers when a headset is connected or as yours is doing not mute the speakers. I don't have anything except Realtek but I know some of the other sound hardware's have similar settings.

The Realtek is located in Control Panel/Hardware and Sound.

1 more replies
Relevance 70.93%

Hey all!

I am trying to get my headset (which plugs into the Front-Green-Out) to work along side of my speakers (which plug into my Rear-Green-Out).

Both are being recognised and both work, but not at the same time. That's because in the screen where you manage your Audiodevices you can only have 1 "standarddevice", which it uses to play the audio.

Is there any way to have more than 1 standarddevice? (or another way to make both work at the same time).

EDIT:
By the way, for anyone using the same motherboard as me: Asus is not supporting it anymore =/. I use the P5K-EPU sounddrivers. Also, if you want the front jacks to work you have to set them in the BIOS to AC97, not HD-audio.

Answer:Front headset and speakers at the same time?

I know on mine when I plug into the front panel it disables my rear inputs. I don't think there is a way to do that using the same driver. What I do though is use a sound card for my speakers/monitors and use the onboard for my headset. I have WMP set to my sound card so I can listen to DVD/music through my monitors while gaming through my headset simultaneously. Helps when the Mrs is scrapbooking and wants to listen to music.

2 more replies
Relevance 70.93%

I am trying to use 2 sets of the insignia NS-NBBAR USB sound bar speakers on my laptop simultaneously. Both Speakers are recognized independently and I can choose one or the other to run, but I can find no way to link them both. Is there any way to set these up to run this way?

Answer:Using 2 sets of identical usb speakers at the same time.

Please remove your double-post.

Double-posting is frowned upon severely.

3 more replies
Relevance 70.93%

My Dell latitude will let me use the speakers and record sound when I am not on the internet but as soon as I dial up with the Hayes usb modem , any thing I try to do with the speakers or microphone gives me the message that my audio is already in use with another application. (that application being my modem) I turned the sound off in the modem properties box and no mute boxes are checked. It acts like a resource conflict but when I go to device manager, I don't find any conflicts. Since I'm trying to use voice chat on yahoo messenger, this problem is annoying. I feel like it is a simple check box somewhere I'm missing and I've just graduated from a computer maintenance class and the Cisco Networking Academy with a 3.94 GPA and this really makes me feel stupid. Please help before I lose all confidence and through this thing in the lake. Thanks
 

More replies
Relevance 70.93%

I think it was working fine yesterday but today both are working at the same time.. I've tried rebooting but the problem still happens.

Answer:Speakers and headphones play at the same time?

Hi there
This sometimed happens with Realtek HD sound cards when the sound card is integrated into the Mobo.

Download and re-install the driver AND HD audio application.

(even if your sound card is not a REALTEK one I'd still re-install the driver (from the MOBO driver set / sound card CD) AND THE APPLICATION -- most of the sound card driver software usually has an application as well (such as a mixer. graphic equalizer etc).

Cheers
jimbo

9 more replies
Relevance 70.93%

Im doing recording and i want to know if its possible to have both slots (main speaker, and phones) working. i want to know if i can avoid buying a splicer.
 

Answer:DOes anyone know how to have speakers and headphones play at the same time

6 more replies
Relevance 70.93%

right fellas bit of a problem here. today i joined a clan in call of duty: world at war for the first time and they said i need to get a headset. so i got my headset (mich extra) and plugged it in and realised that sound was coming out of my headphones AND the monitor mounted speakers!!!
If you guys could tell me what to do that would be much aprreciated
thanks simmo
 

Answer:speakers and headphones working at the same time

8 more replies
Relevance 70.93%

So, my problem is that both the speakers and the headphones play in my HP laptop at the same time.

When I go into my playback devices I have three options:

1. ATI HDMI Output
2. Speakers and headphones (same device)
3. headphones

When my headphones are connected the third still shows them as unconnected but sound will play through both the speakers and the headphones.

I am wondering if there's any way that I can fix this so that I can have sound play out of just one or the other.

I have tried the following things:

-system restore
-updating my sound drivers

Thanks for any future help.

Answer:Headphones and speakers play at the same time

With no system specs specified we can't say exactly. But, in newer HD audio sound systems they autodetect when something is plugged in. If you have one of these devices it is either the driver or there is a hardware problem with the sound chip.

3 more replies
Relevance 70.93%

I have two audio jacks in the back of my computer. I just bought a headset today and no sound is coming through them and I just want to be able to play sound through the speakers and the headset at the same time. I'm using windows 7. Can someone please walk my through the steps and help me with this! Thank you!

Answer:Hooking up my Speakers and Headset at the same time?

Depends on your PC and what audio I/O jacks you have. The GREEN jack is the Speaker (or can be used for headset or line out). If there is a second Speaker/Line out jack you could use that, however most new systems only have extra output jacks for surrond systems and that won't do you any good.

If you have a headphone jack on the front of the PC, and again depending on what you have, some systems have a sound control panel and allow configuring either both the front headphone and rear speaker are both active or the headphone jack cuts off the rear speaker (usually the default mode).

Post some system specs, or better yet fill in the My System Specs so we know what we are dealing with.

2 more replies
Relevance 70.93%

I've been through some guides on internet and the problem is that my headphones are being detected as speakers even though I tick the square that stands for headphones (pop-up window then device is pluged-in).

What I wanna do is that I want to hear voice from speakers and headphones at the same time. I can't do that and if I want to switch from one device to another I need to unplug headphones (or plug in).

Answer:Can't enable both headphones and speakers at the same time

Mark them as separate playback devices. That's about all I can say based on what little info you have provided.

9 more replies
Relevance 70.93%

Hi guys!

I've been struggling with this problem since I got my computer, a little over a year ago.

I've tried everything, but can't figure out how to get sounds from my pc speakers and HDMI at the same time. It's really annoying having to change the primary output multiple times a day (I watch a lot of movies using HDMI-cable to my tv). Might sound like a little problem to you, but I'm becoming obsessed with this

My soundcard is some kind of a Realtek HD -thingy, if that helps.

Any advice would be appreciated

Answer:Sound from HDMI and pc speakers at the same time

That is the way it works. You can only have one "default playback device" - either your Speakers (PC sound) or the HDMI.

I've seen other posts about this, but don't recall seeing any way around this.

4 more replies
Relevance 70.93%

Hi,

I have a HP probook 4530s with win 7 Home premium 64 bit. Till yesterday i was able to hear sound only from my headphones but today when i started my system i was getting sound from both my headphones and speakers. I tried re installing my drivers and all but still the same issue. Kindly let me know any other solution for it.

AND YES I AM HAVING IDT High Defination Audio CODEC DEVICE


THANKS IN ADVANCE.,..

Answer:Why are the speakers and headphones playing at the same time?

Check for a setting in the audio. Many, have an audio configuration panel and an option to mute the speakers when the headphone is connected or not.

I don't have IDT so I can't say exactly where that is at.

Another option, if it worked yesterday and not today, use the System Restore and restore the PC back to an available restore date when it did work correctly. (System restore will not delete any user data). System Restore can be accessed from Start/Programs/Accessories/System Tools.

3 more replies
Relevance 70.93%

The sound is being played through both my headset and my speakers, but when I go into the sound settings it says my headphones are disconnected.  I have seen other posts that have solutions and I have tried them and they dont work.

More replies
Relevance 70.93%

Hi, i bought a laptop yesterday and today when i pluggin my headphones
speakers and headphones both will work at the same time.
What do i do i have reatek hd audio
please help

Answer:Headphones and Speakers will work at same time.help!

This might help explain it. AC'97 and HD audio front panel layouts

1 more replies
Relevance 70.11%

I bought a new laptop, and when I plugged my headphones in, my laptop wasn't recognizing them. It was seeing them as a mic and sound just kept playing over the speaker.

I messed around and now I can plug headphones in and they are working but my speakers are now playing at the same time that my headphones are.

My headphones still aren't popping up in the devices part of my sound manager.

I've already updated my drivers as much as they can be. I have realtek HD audio manager.

Answer:How to get headphones and speakers to stop playing at same time?

In the Realtek Panel, Click on the "Device Advanced Settings" on the upper right of that panel. The option is in the Advanced Settings.

4 more replies
Relevance 70.11%

I have a HP Pavilion g6, Win10. Today the sound on my laptop started playing from the speakers and headphones at the same time. A quick google tells me this is a known and stubborn problem for some HP users. None of the advice worked for me so I tried the option of unisntalling and reinstalling the sound drivers. Looking at the 'Sound' tab of the cotrol panel in Playback there was a device, IDT High Definition Audio, which said it wasn't working. Looking at the control panel I had two options for which sound driver to uninstall- AMD HD Audio Device, or IDT High Definition Audio. Given the fact that IDT Audtio was apprently not working, I chose to unisntall that one. I unchecked the box saying to remove all drivers.  Apparently this was the wrong thing to do, but the instructions made no mention of this. I then searched for and downloaded the IDT High Def Audio driver, restarted my computer and... No sound, and no way of reinstalling the driver. In device manager if I scan for hardware changes it comes up with nothing. If I try all the options to reinstall the sound driver, and even specify the folder where I downloaded the IDT High Def driver, it tells me my sound driver is already up to date. In the Sound tab of the Control Panal, in Playback, I now only have one thing - "Digital Display Audio" - and that's with it showing disabled devices too. Help! Thanks.

Answer:Sound from speakers and headphones at same time, uninstalled...

#HPExpertDayThis is  driver and setting conflict issue. Windows would have tried updating the drivers and someother program might be overiting it. You will have to uninstall and reinstall the drivers and software for Audio.

8 more replies
Relevance 70.11%

I bought a new laptop, and when I plugged my headphones in, my laptop wasn't recognizing them. It was seeing them as a mic and sound just kept playing over the speaker.

I messed around and now I can plug headphones in and they are working but my speakers are now playing at the same time that my headphones are.

My headphones still aren't popping up in the devices part of my sound manager.

I've already updated my drivers as much as they can be. I have realtek HD audio manager.

More replies
Relevance 70.11%

For several last days, I have a strange behavior of speakers and microphone in my t470p. For most of the time they are unavailable in both Linux or Windows OS. However, where I'm doing little push on screen backward (like adjusting screen little bit), both microphone and speaker start working and become available. After I stop adjusting screen (making push backward) device become unavailable again. I'm sure that it is some kind of hardware problem and it should be easy fixing (like some connector is not attached properly inside LCD panel), but according to maintenance manual, I do not see any wires related to speakers or sound card going inside LCD panel. Can anybody advise how to fix such behavior?

More replies
Relevance 70.11%

Ok i am back again with a problem, actually not a problem. Do any one of u have any idea how to enable my laptop speakers and headphones at the same time. I mean both should make sound simultaneously.

Answer:How to enable my laptop speakers and headphones at the same time

I don't believe it is possible. As far as I know, the sound card can only output one channel at a time. I don't know to much about the specifics of audio cards so I am assuming.

9 more replies
Relevance 70.11%

I've tried searching Google for a fix but I can't seem to find anything atm. I'm using the Realtek High Definition Audio driver.

Answer:Sound coming from headphones and speakers at the same time

Update your Realtek Audio Drivers --> http://www.realtek.com/Downloads/dow...Level=3&Conn=2

Go into Realtek Control Panel and check settings.

Regards. . .

jcgriff2

.

1 more replies
Relevance 70.11%

I have an Insignia NS-NBBAR USB sound bar and the internal speakers of my Lenovo V570. I am trying to use both sets of speakers at the same time. Is there any way to accomplish this?

Answer:USB sound bar and internal laptop speakers at the same time

You can only have one default audio playback device, such as your "Speakers" (the PC's sound card and speakers) or some other device such as the USB soundbar, if it sets itself as the default audio playback device.

1 more replies
Relevance 70.11%

I have a rather cheap and poor quality Trust 5.1 surround system and a rather awesome View Quest SonicDock.

While my current, best, computer was away being repaired, I wired up all the speakers in a rather complicated manner which enabled me to have c/sub, the two front side speakers, and the SonicDock output simultaneously, at maximum volume. However, the read side speakers never worked with that cabling and I thought they had both died until I got this computer back and connected the surround properly.

Why do I want the audio to output through two sets of speakers at the same time? The subwoofer from the surround set is awful. The SonicDock produces some literally desk-shaking bass.

So, the computer has the following audio ports:
(rear)
in (blue), out (green), mic (pink), c/sub (orange), rear (black), side (grey)
(front panel)
mic (pink), headphones (green)
Basically, I don't WANT surround. My room isn't big enough and the speakers can't be strategically positioned, I just want the maximum sound output. I.e. I don't want WMP to just be sending audio to the front speakers, I want sound to come out of all the speakers, even if it's just stereo sound but through all 6/7 speakers.
I've fiddled with all the Realtek HD Audio manager settings and can't get it to work how I want it to. When I tried stacking earphone splitters and connecting the four speaker cables into that stack and plugged into the rear green out port, it didn't work as intended.

I think what I'd like to do... Read more

Answer:I'd like to have sound output through 2 sets of speakers at same time

First off, I use a Trust 5.1 surround system and I bought it knowing that I was getting what I paid for :I

But on to your problem, with Realtek it is easily possible to output to two sets of speakers at once (as long as your dock has a single 3.5mm for input).
Unfortunately I don't have Realtek anymore since I bought my X-Fi so I'm going purely from memory here. In the Realtek control panel (accessible through Windows control panel), there is the ability to toggle front panel audio concurrently with your normal, rear port audio. Luckily Google has a far better memory than I.






Quote:
by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously"


How to get headphones and speakers working at the same time? - Super User

You may or may not have to reassign some of the speaker functions through the port connections in Realtek, but I never had to.

3 more replies
Relevance 70.11%

Hi guys,

I was wondering if there is a way to play sounds using both the built in speaker and the headphones at the same time?

I am using an Acer aspire 4736Z with windows vista home basic.
 

Answer:How to play on laptop speakers and headphones at the same time

its impossible technically.

but some soundcard has the stupid ability to do it. for acer aspire series. i think mostly they use realtek HD audio as their onboard chip. dont think it could happen. u can try doing though

it happens to a hp laptop, when something wrong, i cant mute the internal speakers when using hdphone
 

7 more replies
Relevance 70.11%

Hi, I am currently looking for a way to make my built in laptop speakers and my external speakers play at the same time.

Like most laptops if there is something plugged into the line out jack the internal speakers are disabled and the external speakers take priority.

Is there a program that could accomplish this or is what I'm asking terribly difficult to accomplish?

Something that may be significant is that my integrated audio chip set is not manufactured by Realtek (nor is any other part of my computer).

Oli

Answer:Enable Internal and External speakers at the Same Time

You could try something like Virtual Audio Cable. Theres a trial version available.

1 more replies
Relevance 70.11%

I would like to have the sound outputted from the laptop speakers, and also a stereo soundbar connected to the headphone jack.The soundbar has lower pitches and more fullness, while the laptop speakers have better sound in the higher ranges.  

Answer:How to get sound from the laptop speakers -and- headphones at the same time

This is related information... I have a T500 (20823HU), with Conexant 20561 SmartAudio HD, driver 3.64.12.0.  Outputting audio to the internal speakers and external jack simultaneously is called MultiStream Mode on the conexant smartaudio HD.   http://forum.lenovo.com/t5/T400-T500-and-newer-T-series/Conexant-Audio-Driver-for-Vista-4-92-5-and-X...08-08-2009 10:41 AM - last edited on 08-09-2009 10:27 AM  swg101 (All), As you had earlier indicated you were running Vista Ult 32, your Win 7 post above suggests that Conexant's CX20561 does in fact support the Audio Director functions of SmartAudio II under Vista and that it had worked properly for you.  Do Audio Director services actually appear and operate in Vista 32?  From Conexant's SmartAudio II Help file: Classic mode emulates the behavior of Microsoft Windows XP, where sound is heard either on the speakers or on the headphones, but not both at the same time. To select Classic mode, click on the corresponding icon. In Multi-Stream mode, different sounds can be played on speakers and headphones simultaneously. To select Multi-Stream mode, click on the corresponding icon. If so, folks should know that Conexant's driver package does not install these features in Win XP. The Audio Director icon is not presented by the SmartAudio II control center in these systems; only the Volume Mixer, Voice Effects and SmartEQ / 3D Settings are available. Have not explor... Read more

1 more replies
Relevance 70.11%

hi guy

I have just installed my windows 7 ultimate 32bit on my computer. Then i installed Realtek AC'97 Audio
sound drivers. I got my sound working and everthing but when any sound is played like music it plays through my headphones and speakrs at the same time

help guys

Answer:sound plays through speakers and headphones at the same time

Realtek AC97 is very old audio. What is the model of your PC or motherboard? Did you install a Vista/Windows 7 sound driver?

6 more replies
Relevance 70.11%

Hi Everyone,

Hopefully someone can assist with this annoying problem. My mother's computer, for some unknown reason, plays all sounds and music through the actual PC tower AND the external speakers.

We want to disable the sound coming from the PC, as when she has music on or is playing World of Warcraft etc, its really annoying to hear the tinny sounds through the PC tower. We just want to hear it through the external speakers.

She's running a HP Compaq dc5700 PC with Windows XP. The default sound is via RealTek HD Audio.

It hasn't always done this - its a recent issue.

Any advice would be greatly appreciated.

Thanks guys!

Sarah
 

More replies
Relevance 70.11%

Hello,
I'll try to explain this as best as I can. I have a Compaq 8510w Workstation Laptop, and I am trying to get the internal Laptop speakers and some external speakers to work and both make sound at the same time. I have a secondary monitor that has speakers, and it's speakers connect through the headphone jack. So I would like to use the secondary monitor's external speakers, but I would also like the internal speakers in the laptop to work as well, to kinda make some version of surround sound, and just to generally boost the volume of my system. Is there a hardware or software change that I can make to make this work? I have a microphone and headphone jack in the front of the laptop, and in the back I have a green and blue jack. Any help would be greatly appreciated, and if you need more information I"d be more than happy to help in any way, thank you,
-Neo1Code
 

Answer:Would like for BOTH Headphones and Internal Speakers to work at same time

Is there a way to tell if this is the cause of the problem? I messed around with all of my audio options, tried upgrading the driver, I've hooked the external speakers into every port available, and i reinstalled the monitor software thinking that maybe they had an application for it. I don't know what else my options are, but I find it weird that there isn't some kind of work around or registry change that can be made. Thank you once again for any help,
-Neo1Code
 

6 more replies
Relevance 70.11%

I use a bluetooth speaker (Tendqa) as well as a pair of wired headphones on my computer (XP). Until yesterday, I could get audio output on both simultaneously (I know for sure because many times I forgot that the speakers were on and I'd start playing a game and the sounds were broadcast through the speakers and I didn't realize it right away because I had the headset on).

Anyway, as of this morning, it's an either/or thing with music (played via Pandora or WMP). I can get system sounds through the headset (such as the audio demo through Realtek) but no music while the bluetooth speakers are connected.

The only thing I can think that I did in the interim is install Adobe Acrobat Reader X. But I restored my computer to yesterday's settings (before the Reader install) and it didn't solve the problem. I even checked my windows registry to make sure none of the Reader X registry entries were there. Nada.

Can anyone think of anything else I can try?

Barbara
 

More replies
Relevance 70.11%

In the Windows audio playback tab there's only "speakers" but sound is playing from both speakers and the headphones, with headphones plugged into the right jack. I checked the Realtek Control Panel and there was F**K ALL for options there (see attached). There is an Intel(R) Display Audio in Device Manager alongside Realtek High Definition Audio. So now I can't watch warm-up videos at school without blasting the sounds through my speakers as well.

I tried a System Restore to before the problem started but it didn't do anything. The problem started around the time I ran an Advanced Systemcare 8 scan, which does the following tasks:
Spyware Removal
Registry Fix
Privacy Sweep
Junk Files Clean
Internet Boost
Shortcuts Fix
Registry Defrag
System Optimization
Security Defense
Disk Scan
Vulnerability Fix (Windows Updates)
Disk Optimization
Also when I move my laptop it shuts off for some reason, so it could've interupted the scan or updates or something.
System Specs included inside attached DxDiag.

More replies
Relevance 70.11%

I had been facing this problem for a long time. At the beginning after the laptop is turned on, the speakers on it work just fine. But after 4-5 minutes, the problem begins. The speakers suddenly stop playing, then again play, again stops and again resume..this thing goes on until the system is rebooted.  Then again after 4-5 minutes the weird phenomenon starts. I have the coexant hd audio driver installed. Tried reinstalling windows several times. None produced any positive result. It happens on any application i use and even in case of the system sounds too. Can anybody help me solve this problem please? I know its something not many people heard of. But i'm facing it.

More replies
Relevance 70.11%

Hello,Sorry if this is in the wrong place, as you can tell, I'm a newbie. Anyways, I'm having a bit of a problem with my headphones and speakers. It all started around a year ago. All of a sudden, my speakers stopped working, however, the headphones continued to work fine. Then, out of nowhere a few months later, my speakers magically began working again. Only problem is, my computer doesn't seem to recognize that I have headphones plugged in, so the speakers and headphones play sound at the same time. This is a major inconvenience because I like to listen to music and watch movies, but can't do so without disturbing others anymore. There might be something lodged in the headphone jack, as the headphones don't seem to go all the way in, but it still goes in enough to play sound through them. I've tried disabling the speakers themselves, but it blocks the sound from the headphones too.So basically what I'm asking is, is there some way I can 'fool' the computer into thinking I've got headphones plugged in so I don't have to run both at the same time? Or any other way to fix it that doesn't involve high-cost repairs? Any help here would be so greatly appreciated!ThanksEDIT: Forgot to mention, I'm using a Gateway NV79 laptop running on Windows 7. It's a little over a year old.

Answer:Headphones/Speakers Problem (Working at the Same Time)

The laptop has only one port used for both the Headphone and External Speakers. Have you tried those cheap earphones for testing?

6 more replies
Relevance 70.11%

Hello,

I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.

Answer:No Audio coming from speakers and headset at the same time

In the Playback Device section of the panel you have displayed. Check the Make front and rear output devices playback tow different audio streams simultaneously and see if that does it for you.

The usual default mode on PC sound cards is to mute the speakers when a headset is plugged in.

20 more replies