Computer Support Forum

Can not load windows , update error to 8.1

Question: Can not load windows , update error to 8.1

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Relevance 100%
Preferred Solution: Can not load windows , update error to 8.1

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Can not load windows , update error to 8.1

Reboot then follow this guide. To get to the troubleshoot RE. How to use the Windows 8 System Recovery Environment Command Prompt In command prompt type in then hit enter.


Code:
rstrui.exe
Select a restore point to before you tried updating Windows 8 to 8.1.

1 more replies
Relevance 61.09%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 60.68%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.

I tried those commands from windows site

bootrec /fixmbr and other bootrec

and in config,

ren system syste.001 this worked but

ren software software.001

this gave errorprocess in use, can not be accessed.

How can i rescue? I dont have any rescue disc or etc.

Desktop computer, 32 bit probably.

Answer:Can not load windows, update error to 8.1

What's the error he's receiving on boot?

5 more replies
Relevance 60.68%

In windows 8, my brother tried to update to 8.1 but now computer seems it has 8.1 pro. But it can not load. Automatic repair, refresh, system restore, all of them gave errors. I dont want to reset.
 
I tried those commands from windows site
 
bootrec /fixmbr and other bootrec
 
and in config, 
 
ren system syste.001 this worked but
 
ren software software.001
 
this gave errorprocess in use, can not be accessed.
 
How can i rescue? I dont have any rescue disc or etc.
 
Desktop computer, 32 bit probably.

Answer:Can not load windows , update error to 8.1

Is the Windows 8.1 disc 64 bit version?  Either bad disc, or wrong version for what you have, and what he burnt to the disc.  I have run into where I have had to turn off Secure boot in the UEFI bios.  It helps to know what the manufacturer & model# of your computer that you have.

5 more replies
Relevance 58.63%

Been trying to update XP SP2 with the .NET Framework security update V1.1 SP1 (KB886903), but every time I try I receive the following error:

==============
Unable to load JIT compiler (MSCORJIT.DLL). File may be missing or corrupt. Please check your setup or rerun setup!

Error Code: 0xC0000005
Try to install the update again, or request help from one of the following resources.
==============

The only fairly helpful resource I've found tells me that the "Unable to load JIT compiler" error is caused by a timeout error on a system with a heavy load. I've had this error numerous times and checked my system load and it's never been high at all.

Any suggestions would be appreciated.

-z

Answer:Windows Update Error - unable to load JIT compiler (MSCORJIT.DLL)

reduce the load on the machine by closing applications before re-running setup.

3 more replies
Relevance 58.63%

My windows update indicates that some files are missing.  I select reinstall and I get this error.  How do I correct this? -sp

Answer:X60s Windows update will not load Error number: 0x8024D007

Welcome to Lenovo's forums!   First, please check in c:\windows\system32\ and look for a file named WindowsUpdate.log right after you run Windows Update.  Scroll down to the bottom and see what the specific error is.   I have cleared odd Windows Update problems by doing the following:1:  rename c:\windows\system32\softwaredistribution to something else2.  delete c:\windows\system32\WindowsUpdate.log or move it somewhere else. Let us know what happens after you try this and what the specific error is.   

1 more replies
Relevance 58.63%

Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.


Any suggestions?

Sam
 

Answer:fail to load sortbls.nlp error after Windows Update froze

Use System Restore to revert back to a date before any updates may have been applied.
 

2 more replies
Relevance 51.66%

Yesterday, after a Windows update my CorelDraw vba macros stopped working; trying to run some of them gave me an "Error During Load" message; the others just didn't do anything at all. I had to uninstall the update, now everything is back to normal.

Windows 10 Professional
Version: 1703
Build: 15603.786
HP ProDesk 400
Intel i5-4670, 8GB RAM

Any help will be greatly appreciated. thanks

More replies
Relevance 51.66%

Yesterday, after a Windows update my CorelDraw vba macros stopped working; trying to run some of them gave me an "Error During Load" message; the others just didn't do anything at all. I had to uninstall the update, now everything is back to normal.

Windows 10 Professional
Version: 1703
Build: 15603.786
HP ProDesk 400
Intel i5-4670, 8GB RAM

Any help will be greatly appreciated. thanks

More replies
Relevance 50.84%

I was manually installing service pack 2 on windows vista because i was told this would sort out my problem with not being able to do any auto updates, then it got to the stage where it shutdown and was installing 1/3 updates then when it got to the 2nd part it crashed and when i restart the laptop nothing happens at all, just a black screen, no boot menu options or anything like that. I dont have a vista disc or anything like that, does anyone have any suggestions as to how i can solve this problem, sorry if my explanation was short and not very detailed.

thanks in advance
 

Answer:Vista wont load after update error

Um, I believe you will need some kind of disk. Specifically, you'd need either the Vista disc or the ERD disc. You need to launch a repair on your OS, as it seems to be screwed. Can you get into Safe mode? Can you get into the pre-boot menu at all?
 

2 more replies
Relevance 50.43%

Update - 9/8/15

Fixed by reinstalling Windows fresh (Again).

I think the problem was caused by installing Windows linked with my Microsoft account and then switching that to a local user. My Microsoft account was registered for the insider program so perhaps I was receiving the fast updates and switching to a local account put me on slow updates which got Windows Update muddled in the confusion.

Original Post

Windows Update appears to be stuck/broken. It displays this loading animation even when left alone for an entire day (See screenshot). All the other panels such as Windows Defender will display their available options, it is only Windows Update that will not show.

This is a clean install of Windows 10 Home.

I have made some alterations to the service configuration, disabling what I had been advised as unnecessary services. I have reverted as many of those changes as I could remember but it is a possibility that one of those changes caused this.

Background Intelligent Transfer service is "Running" and set to "Automatic (Delayed Start)".
Windows Update service is "Running" and set to "Manual (Trigger Start)".

8 Aug 15 - Edit: I have cross referenced services with another computer with an unaltered fresh install of Windows 10 Home. No difference in service configuration was found.

Internet connectivity is stable. Network profile is "Public". No alterations have been made to the default network configuration.

User... Read more

Answer:Settings > Update & Security > Windows Update - does not load

Hi wadlip,

I have done exactly the same fixes as you - to no avail. Nothing works. I am surprised by a lack of response by Microsoft. In addition to not being able to update, i cannot update the definitions for Windows Defender. This issue has definitely something to do with BITS.
If i stumble over the solution, i'll post here. I have all night to find the fix

7 more replies
Relevance 50.43%

Update - 9/8/15

Fixed by reinstalling Windows fresh (Again).

I think the problem was caused by installing Windows linked with my Microsoft account and then switching that to a local user. My Microsoft account was registered for the insider program so perhaps I was receiving the fast updates and switching to a local account put me on slow updates which got Windows Update muddled in the confusion.

Original Post

Windows Update appears to be stuck/broken. It displays this loading animation even when left alone for an entire day (See screenshot). All the other panels such as Windows Defender will display their available options, it is only Windows Update that will not show.

This is a clean install of Windows 10 Home.

I have made some alterations to the service configuration, disabling what I had been advised as unnecessary services. I have reverted as many of those changes as I could remember but it is a possibility that one of those changes caused this.

Background Intelligent Transfer service is "Running" and set to "Automatic (Delayed Start)".
Windows Update service is "Running" and set to "Manual (Trigger Start)".

8 Aug 15 - Edit: I have cross referenced services with another computer with an unaltered fresh install of Windows 10 Home. No difference in service configuration was found.

Internet connectivity is stable. Network profile is "Public". No alterations have been made to the default network configuration.

User... Read more

Answer:Settings > Update & Security > Windows Update - does not load

Hi wadlip,

I have done exactly the same fixes as you - to no avail. Nothing works. I am surprised by a lack of response by Microsoft. In addition to not being able to update, i cannot update the definitions for Windows Defender. This issue has definitely something to do with BITS.
If i stumble over the solution, i'll post here. I have all night to find the fix

9 more replies
Relevance 48.79%

Alright guys, I've got some major problems with a computer here. The computer seems to be infected with some sort of virus, with symptoms similar to conficker. I am not sure that this is what is causing our problems, but it's come down with a nasty worm that has the following symptoms:

1) All microsoft update websites are disabled. I try to log onto them and the website will not load. All other websites load just fine.
2) Major websites posting fixes to viruses and computer problems also redirect to a website with advertisements.
3) I get a svchost error that, upon clicking "ok", freezes the computer or makes it run very slowly.
4) Svchost.exe begins to consume a MASSIVE amount of memory, slowing down the entire computer.
5) I am experiencing random redirects to websites.
6) The computer, as a whole, is running sluggishly.

We attempted the following fixes:
1) Installing and updating avast, and running scans. Various trojans have been removed.
2) Installing and updating malware bytes. Various trojans and viruses have been removed.
3) Running windows repair. This did not fix any of the above problems. We are trying to avoid a complete format here.
4) Reinstalling virus scanners and malware bytes, running them again, and fiding more viruses.
5) Reinstalling internet explorer 8.

None of the above work. We do have access to a windows install CD, just for your knowledge, just in case. But as mentioned before, we'd like to remove the problems without... Read more

Answer:Computer getting svchost error, microsoft update website does not load, MAJOR PROBLEM

Trying to get this working for my boss, guys. We're a small dealership, and its holding up business bad. We've already tried IT guys over the phone.

10 more replies
Relevance 48.38%

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore. I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.I really would appreciate help. 

Answer:Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

 
Got it !!!!
If You are using notebooks with with hard drive larger than 700 GB you probably should update Intel Rapid Storage Technology Driver.
Here is solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product
Download and install it.

97 more replies
Relevance 47.97%

ASUS Desktop PC CM6850 Series
Windows 7 Home Premium SP1
64-bit
Core i7
4GB RAM
500GB HDD
Windows updates not working for a while. Initial was 8007370B appearing in the Windows Update window when searching for updates. Found bad memory using Memtest86+ and pulled the stick. Other stick no errors after 8 passes.

Toshiba HDD installed. Ran two different HDD diagnostics test on it and it passed.

No conflicts in device manager.

Now, Windows Update window showing 80070002 error. Based upon instructions, ran System Update Readiness Tool (SURT) but that appears to have not made any resolution. Ran it twice to ensure it ran successfully.

Then, ran the Windows Update Diagnostic.diagcab from go.microsoft.com/fwlink/?LinkID=231149 and it shows Windows Update error 0x8007370B(2014-09-18-T-06_58_30P) as NOT FIXED. All other items in list shows as FIXED.

SFC /scannow will not run ... displaying the message "windows resource protection could not perform the requested operation". I tried the same in a elevated prompt in normal windows and in safe mode with the same result. No luck running Surface Scan.

Ran chkdsk /r twice also.

Screen captures of both errors and CBS log file attached. Any help is greatly appreciated. In the meantime, I will begin running some antimalware scans just in case.

Thanks for any assistance.

Answer:Windows Update Error 80070002 & Windows Update Diag Error 0x8007370B

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

We need that data whether or not either CheckSUR or SFC complete.

9 more replies
Relevance 47.56%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.

Answer:Windows update will not load

Hi, try the following making sure each stage is clear or fixed before proceeding:

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed- else do not proceed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

From an admin command prompt run
sfc /scannow

Download and install Tweaking.com's free cautious repair tool
Follow the steps as appropriate and select only the Windows update repair.

4 more replies
Relevance 47.56%

I am having an issue with Windows Update. It will not load!

Answer:Windows Update will not load

Try the blue "run now" box on here:
Fix Microsoft Windows Update Issues

2 more replies
Relevance 47.56%

I require updates for mi Windows XP home edition. However, I cannot load the Widows Update page!

I open IE 6 and the page just loads forever!

Any suggestions?
 

Answer:Cannot load Windows update.

Are you using a firewall and if so, which one?
 

3 more replies
Relevance 47.56%

Was running 10 with only a few problems. Received notification to reboot. Circle just spins & spins! Have tried repeatedly. Only online fixes involve messing with registry which I don't want to do!

More replies
Relevance 47.56%

Windows XP Professional
IE 6 SP1

This workstation had been hit with a virus and malware had been installed.
Cleaned the virus off with Trendmicro and using AdAware SE to clean up the malware.

Now Windows update will not load. IE opens but the window remains white. PC is configured to receive Microsoft updates from our Software update server but can't verify the updates because Windows Update will not come up. IE will browse to other web sites.

Ran HijackThis. The log is below. Any help you can offer will be greatly appreciated.

Logfile of HijackThis v1.99.1
Scan saved at 9:00:40 AM, on 3/16/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\WINDOWS\System32\NWTRAY.EXE
C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe
C:\Program Files\Winamp\Winampa.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Adobe\Acrobat 4.0\Distillr\AcroTray.exe
C:\Program Files\Conversions Plus\MacName.exe
C:\Program Files\WinZip\WZQKPICK.EXE
C:\WINDOWS\System32\NALWIN32.EXE
C:\Temp\hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer,SearchURL = http://www.popupsearches.com/sidesearch.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://smbusiness.dellnet.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.capcitypr... Read more

Answer:Windows Update will not load

You have been hit by the new Bube.d (aka Win32.Beavis) virus which severely messes with some Windows settings,including the update feature.

Save the BOLD to notepad,as Fix.reg as"Type" all files

=====================================

Windows Registry Editor Version 5.00

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate\DisableWindowsUpdateAccess]

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoWindowsUpdate"=dword:00000000

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"=dword:00000000
"AUOptions"=dword:00000000

[-HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]

[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoDevMgrUpdate"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"NoUpdateCheck"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate]
"DisableWindowsUpdateAccess"=dword:00000000

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
&qu... Read more

1 more replies
Relevance 47.56%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.
 

Answer:windows update will not load

10 more replies
Relevance 47.56%

When I launch the settings and go to Update, it loads forever instead of opening the options.

I have Googled to try to solve this issue but nothing has worked for me.

I've tried running this diagnostic: https://support.microsoft.com/en-us/gp/windows-update-issues/en-us
I've tried running these .bat files to reset Windows update: Windows Update - Reset - Windows 7 Help Forums

So far nothing has worked for me unfortunately. I am wondering if anyone here has any other ideas of what I could do to fix this problem?

Answer:Windows 10 Update Will Not Load

Welcome to Ten Forums. Since resetting windows update did not work I would try the check the system file integrity. This is from the tutorial forum. https://www.tenforums.com/tutorials/2...dows-10-a.html .

4 more replies
Relevance 47.56%

Hi, I was sent here by Chemist who was a great help in spyware removal. I just have a windows update that tries to load on shutdown, but fails every time. How can I get the update information to you? I am a techie rating of about 3 out of 10, but I try to follow innstructions. Thanks. :)

More replies
Relevance 47.56%

After reading about windows updates, I went in to check windows update. When I select WU all I see is some grey/blue dots going across the top of the screen. I tried the troubleshooter and windows reset for the update, but no changes. I contacted the windows community but instruction for submittine some logs was incorrect.One is attached.

More replies
Relevance 47.56%

For over a week, when I start my laptop, it seems to start normally, then I get a screen that says "updates could not load and changes are being undone, don't turn off my computer'.  Does anyone know what is going on?  I am using Windows 8.1.
 
I have Panda Security, and Anti Super Spyware, both paid for.  I just got rid of Win Patrol free, although I have used it on my old laptop without problems.  I have not purchased or downloaded any other programs.
 
Any ideas how I can find out what is going on?

Answer:Windows update won't load.

I'm just offering some advice. I'm not a Computer expert, just so you know
 
I had this issue on 2 different PCs, both with Windows 8.1.
It would force me into updates, and then say that the updates were unsuccessful and that it is undoing the changes.
It stayed in a restart loop of 'undoing changes' until I went into Safe Mode (using Shift + F8) and did a System Restore.
I have now changed the settings on BOTH computers to not automatically install update. I don't need that kind of trouble! LOL

1 more replies
Relevance 47.15%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Relevance 46.74%

This Toshiba computer had the Windows 7 Updated loaded onto it. Now when the computer starts up I receive the Safe Mode etc...options. I select Start Normally and from there is when it takes about an hour or more to load windows.

When the system finally loads, to click on anything takes about 10 minutes or more to populate anything.

A loading error message is received in the bottom right hand corner which says something about logging in as administrator and loading a disc.

This is my friends computer(previously mine) and I need to get to the pictures and save them in case I'm going to need to reset anything. If someone can tell me how to get at the pictures faster or fixing this without wiping out the pics that would be great. Much appreciated!! Tiff

Answer:Download Update for Windows 7, now comp takes about an hour to load windows

Right now I am in safe mode and it's seconds faster but not much and i did not receive that error in the bottom right corner.

3 more replies
Relevance 46.74%

I recently installed Windows XP and all my programs on a new hard drive, as the old one would not boot. Last week I received a "Generic host process for Win32 services" error. My machine locked up, and I had to restart. Then I started having issues where Windows would not load or would take a very long time. I am able to start Windows in Safe Mode, but it takes much longer than it should.

Now sometimes when starting IE or Firefox or when surfing, new tabs are started on spammy webpages. Other times, IE or Firefox will not start. I also cannot go to the Windows Update site.

Neither Malwarebytes nor Avast find any instance of infection.

AVG says that it finds 6 infections and repairs 3. Just in case it would help, here is that part of the AVG log file:
(C:\WINDOWS\system32\svchost.exe (3440):\memory_001a0000 Trojan horse Agent_r.XJ
C:\WINDOWS\system32\svchost.exe (3440) Trojan horse Agent_r.XJ Object was removed.
C:\Program Files\Internet Explorer\iexplore.exe (2652):\memory_00260000 Trojan horse Agent_r.XJ
C:\Program Files\Internet Explorer\iexplore.exe (2652) Trojan horse Agent_r.XJ Object was removed.
C:\WINDOWS\explorer.exe (1484):\memory_001a0000 Trojan horse Agent_r.XJ
C:\WINDOWS\explorer.exe (1484) Trojan horse Agent_r.XJ Object was removed.)

Thanks for any help you can provide!
coxpac30

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:02:07 PM, on 5/9/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.1870... Read more

Answer:Windows Update blocked, browser redirects, slow to load Windows

Is there anyone out there that can help me, or can I provide any additional information?
 

1 more replies
Relevance 46.74%

I am constantly having redirects and new tabs spontaneously open to spammy websites in both IE and Firefox. I cannot get to Windows Update, it either says it can't connect or takes me to a fake search engine page. Windows is very slow to load at start, and after working for a little while, I tend to get Generic Host Process for Win32 Services errors, after which my machine locks up.

Malwarebytes has not found anything. AVG says it finds 6 infections and fixes 3. The infections are in svchost.exe, iexplorer.exe, and explorer.exe, where it says that a Trojan horse Agent_r.XJ Object was removed from each.

I do have access to my Windows XP Install disk.

Thanks so much for your help,
coxpac30
=======================================================

.
DDS (Ver_11-05-19.01) - NTFSx86 NETWORK
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_25
Run by mcox at 15:41:25 on 2011-05-25
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1605 [GMT -5:00]
.
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox\plugin-container.exe
C:\Documents and Settings\mcox\Desktop\dds.com
C:\WINDOWS\system32\WSCRIPT.exe
.
============== Pseudo HJT Report ===============
.
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7... Read more

Answer:Browser redirects, Windows Update blocked, slow to load Windows

Hello, Welcome to TSF.
I'm nasdaq and will be helping you.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.

Please do not install or uninstall any programs, or run any other scanners or software, unless I specifically ask you to do so. Also please copy and paste logs into the thread, rather than add them as attachments.
===

Please download ComboFix from one of these locations:

Link 1
Link 2

* IMPORTANT !!! Save ComboFix.exe to your Desktop
Disable your Anti-Virus and Anti-Spyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this ... Read more

15 more replies
Relevance 46.74%

Hello everyone,

When I try to load the menu it won't load, it just looks like this and stays like that for ever, nothing will pop up. Here's a screenshot.

Imgur: The most awesome images on the Internet

Answer:Windows update menu won't load.

Anyone?

13 more replies
Relevance 46.74%

I just upgraded to Windows Vista 64 over the weekend as a clean install. I ran Windows Update and got everything installed fine. However, shortly after Windows Update failed to open when I clicked the icon. I see a window start to open on the desktop and then disappear. No errors show up. If I go into the Control Panel->Security and click "Turn Automatic Updating On or Off" I receive the following error: Windows cannot find 'shell:::{26EE0668-A00A-44D7-BEB064C98683}\10\::{36eef7db-88ad-4e81...\pageSettings'. Make sure you typed the name correctly, and then try again.

Any assistance would be greatly appreciated.

More replies
Relevance 46.74%

Running Win XP, SP-3, IE and Firefox 3.5.3, browsers will not load Microsoft or Windows Update page(s).
Error mssg: Internet Explorer cannot display the webpage in IE and

"Server not found" in Firefox.

Have tried re-registering various files, among them:

Hregsvr32.exe c:\windows\system32\wuweb.dll

regsvr32.exe c:\windows\system32\wups2.dll

regsvr32.exe c:\windows\system32\wups.dll

regsvr32.exe c:\windows\system32\wucltui.dll

regsvr32.exe c:\windows\system32\wuaueng1.dll

regsvr32.exe c:\windows\system32\wuaueng.dll

regsvr32.exe c:\windows\system32\wuapi.dll

No good, yet.
Below is Hijack This log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:38:42 PM, on 11/11/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Panda USB Vaccine\USBVaccine.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\WINDOWS\system32\ICO.EXE
C:\Program Files\Intel\Intel Matrix Storage Manager\Iaanotif.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrotray.exe
C:\Program Files\CyberLink\PowerDVD DX\PDVDDXSrv.exe
C:\Program File... Read more

More replies
Relevance 46.74%

Repair didnt work..finally got it to do system restore,

Windows 7 Ultimate x32

ran sfc,chkdsk,malwarebytes all good results
One of these is the culprit
http://i50.tinypic.com/33v2bys.png

If anyone knows which one with out me having to install and see for each one

Answer:Windows wouldnt load after update

Hello Taj and welcome to the forums

Could you follow these instructions please?

Windows Genuine and Activation Issue Posting Instructions

I don't think it would be possible for us to tell from that picture which update is causing the problems. Just install them one by one

Tom

3 more replies
Relevance 46.74%

Im fixing a pc for a friend. Tried the virus/spyware sweeps and they deleted a few. Nothing new found but any time I try to goto windows update is loads the msn.com page. Here is a HiJack log file. Any help would be great. Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:23:18 PM, on 7/1/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\TPSrv.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\pavsrv51.exe
C:\Program Files\Panda Software\Panda Platinum 2006 Internet Security\AVENGINE.EXE
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
c:\program files\panda software\panda platinum 2006 internet security\firewall\PNMSRV.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\arservice.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DE... Read more

More replies
Relevance 46.74%

I recently reloaded xp on my computer to fix an error created by another piece of software. Since than I cannot get my system to accept security updates from Microsoft. The down load works, but I get an error that indicates none of the updates can be installed. I am currently missing 70 updates. I have tried to load one at a time in the event I did not reserve enough disk space, but I still get the same results. Do you have any ideas how this can be fixed.
 

Answer:Cannot load latest windows update

Try this website:

http://www.getautopatcher.com/

It allows you to download all the patches (about 300 MB) and install what you need. I have a security camera pc(vendor configured) that does not allow access to the windows update website and I used this tool to patch the system. Hope it helps solve your issue.
 

1 more replies
Relevance 46.74%

Hi Guys
I have a number of windows XP home edition updates which have failed to load. If I click shut down at the end of session then my pc freezes. If I shut down without loading theem all seems okay. Is there a way I can delete these update and start again.
Thanking you in anticipation
Ron Thayre
 

Answer:Windows update that fail to load

Try to restore your computer before the updates were downloaded using system restore. You can then download them again.

If you need more information on how to do a system restore just ask.

Good Luck
 

1 more replies
Relevance 46.74%

Hello, I just rebuilt my PC and installed XP SP3, IE 8, and FF 3.6. Automatic updates are working (i.e. updates are downloaded and installed). However, I cannot get to the Windows Update webpage on this machine (http://windowsupdate.microsoft.com/). I've read forums that say this is due to a firewall issue, but I disabled my firewall and still cannot access the page. I have not setup any other special network rules/restrictions. I can access other webpages without problems. It could be a virus I suppose but I just rebuilt the system, so that makes me somewhat skeptical. Any thoughts? Thanks everyone!

More replies
Relevance 46.74%

When I try to check for updates, the page fails to load. My PC has Win 7 Service Pack 1 64 bit OS. I don't know what to do and would appreciate your suggestions. Thank you for your assistance!

Answer:Windows Update Fails to Load

Hello there, 
 
Have you launched "Windows Update troubleshooter" and see if the issue still persists? http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
 
 

Keep us posted

1 more replies
Relevance 46.74%

My partner has a Dell Studio 1535 laptop. She just downloaded the latest Windows update. When she restarted the computer it took her to a black screen with a single line of white text indicating that various files were installing. It suddenly stopped at 430 of 49073 files with a message "!! 0xc0190036 !! 430/49073 (mfc42u.dll)" The computer is just hanging. If I power it off and restart it gives the option of a startup repair or to start normally. Starting normally leads to the hanging message; a startup repair fails to identify the issue, other than suggesting maybe a device has recently been attached. This is not the case.

Does anyone have any ideas?

Answer:Windows Update and now Vista won't load

hello,

have you tried starting in safe mode? if it does you can use system restore, or just uninstall the last update....(start tapping the f8 key after hitting the power button)

good luck

1 more replies
Relevance 46.74%

Hi all. I have a problem with windows update. it fails to load. Then my pc says updates have been installed and its fine. But after a few days the same problem returns. This all started when I synced my email. Also Microsoft sites take ages to load. Any help would be great. Thanks.

More replies
Relevance 46.74%

I can not load windows new updater. Every time I try it just starts back at the start down load page all over again.

I also can't load DirectX 9.0b. It says that I have ver 8.1 . A little box that reads "Software Installation" on the top bar says. The software you are installing has not passed Windows Logo testing to verify it's compatibility with Windows XP.

This software will not be installed. Contact your system administor.

The next little box that pops up says.

"DirectX Setup" on the top blue bar and then below it says. DirectX did not copy a required file.
Any help I can get on this stuff would be greatly appreciated.
 

Answer:Can't load Windows update or DirectX 9.0b.

12 more replies
Relevance 46.74%

I have a Windows 7 64-bit machine that appears to be infected with malware. No automatic updates work; when I check the services, the Windows Update Service is not running even though it is set to Automatic. I cannot get it to start; the error code is 93.

A copy of the HijackThis logfile is attached.

I believe the Admin user has been hijacked, and any attempts to delete suspicious items through HiJackThis do not work.

The items containing lsass look to be suspicious, for example.

Please help.

Answer:Windows update service will not load

Hello,Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Please note that I am not a member of the Malware Removal Team and will not be assisting you in removing the infection. I'm simply helping you to post the information they need in order to assist you.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.Orange Blossom

3 more replies
Relevance 46.74%

I'm having a problem with Windows Update. When I go to access the update site, it says done but with errors on page. Nothing shows up at all, just a blank screen. I have a feeling it has something to do with all the changes I had to make to get rid of lots of spyware/malware. If anyone could offer some thoughts and possible solutions, I'd really appreciate it. I haven't been able to update Windows in quite a while.

I'm running XP Pro. If any other information is needed, please let me know. Thanks to all who help in advance.
 

Answer:Solved: Can't load Windows Update

Visit http://www.softwarepatch.com for latest windows downloads....or try doing a repair on your OS using the WindowsXP cd.
 

2 more replies
Relevance 46.74%

I am trying to get a freinds computer back up and running. there were some viruses I cleaned out using AVG antivirus program. I can surf the net but it wont let me get into email as well. I wanted to do windows update and it wont load because of errors. PLEASE help
 

Answer:cant get windows update to load getting errors

If you have cleaned ALL malware, your current problems may not be malware related. The only way we can tell if you are clean is by having you run our full cleaning procedures given below.

Please follow our standard cleaning procedures which are necessary for us to provide you support. Also there are steps included for installing, renaming, running, and posting HijackThis logs as attachments.

Run ALL the steps in this Sticky thread READ & RUN ME FIRST Before Asking for Support
Make sure you check version numbers and get all updates.
Very Important: Make sure you tell us the results from running the tutorial...was anything found? Were you unable to complete any of the scans?...Were you unable to download any of the tools?...Did you do the on-line scans as suggested? etc.

After doing ALL of the above you still have a problem make sure you have booted to normal mode and run the steps in the below link to properly use HijackThis and attach a log:
Downloading, Installing, and Running HijackThis​Make sure you also rename HijackThis.exe as suggested in the procedures. Use analyse.exe for the new name. This is very important due to some new infections going around.​
When you return to make your next post, make sure you attach the following logs and that you have run these scans in the following order too:
CounterSpy - only for Windows XP, 2K, & NT users
AVG Antispyware log - ONLY IF NEEDED you were not able to run CounterSpy. - only for Windows XP, 2K, &... Read more

1 more replies
Relevance 46.74%

deleted. Nevermind, fixed it.

More replies
Relevance 46.74%

I can not reach Windows Update at the automatically inserted url. The
Windows "flag" does not wave automatically and only very briefly when I click 'go.'
Solution? Thanks.
 

Answer:Solved: Windows Update will not load

Can you see other web sites? Do you have a firewall and Anti Virus?
 

3 more replies
Relevance 46.74%

I just got my new computer a few days ago and I've been downloading the usual drivers, updates etc. for it. The graphics card is GeForce 6800 GT, so I downloaded the latest driver (61.77) from www.nvidia.com. This worked perfectly until I found out there were further "updates" - and the stupidity of what I did should become apparent now - located here: http://3dchipset.com/drivers/beta/nvidia/nt5/index.php.

Following the flimsy advice that I found on another forum site, I went for the 62.20 download. I can't remember precisely when things went wrong after this, but I think the next two or three restarts were successful.

The current situation is: I switch on the computer - it gets as far as the screen where it says Windows did not start successfully. There is a 30 second timer counting down, and the options are:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally

The first three options start a series of lines down the screen which read "multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\Syste m32\DRIVERS\" and then after "DRIVERS" there will be a *.sys file, e.g. ACPI.sys. After the last line the computer freezes.

"Last Known Good Configuration" makes the screen go black and it stays like that. "Start Windows Normally" freezes the screen, including the timer, and it stays like that. The only options from here are the power on/off or reset bu... Read more

Answer:Can't load Windows after driver update

Well, if this is a result of your driver installation then you need to uninstall it. You can select Safe Modem W/Networking and uninstall the driver that way, after that everything should be okay. If not, since its a new install, I'd reformat and start over.

Cheers!

9 more replies
Relevance 46.74%

Hi All,

I was using my laptop last night (Dell Vostro 1710 and using Windows Vista), using only internet via firefox and the steam application, and had no problems prior to switching it off before I went to bed.

Got up this morning, switched on the computer and after loading past the 'Dell' logo it would not load any further.

I am pretty limited with my computer knowledge but have followed some online sites (mainly via Dell and Microsft) which have so far failed to help. I have carried out the following:

Start up Repair - says that the problem may not be fixed automatically and to contact either the computer manufacturer or system administrator. There is only 1 user on the computer so should be no administrator issues. I am currently in Thailand so support via Dell will be very limited or v. expensive (and from what I have read on-line they will recommend that the steps below are followed prior to doing a whole restore of factory settings).

I have attempted a System Restore of various points but receive the following message:
system restore failed due to an unspecified error. The requested operation was made in the context of a transaction that is no longer active

I see from the list of previous available system restore points that a windows update occurred sometime between me switching the computer off and turning it back on this morning. Surely this has to be the problem.

The option to repair OS(C) has also popped up. I have 'ok'd' this, then... Read more

Answer:Windows Vista will not load following update

7 more replies
Relevance 46.74%

I can easily connect to the Widows Update site, but when I click, ?Scan for update?, the PC remains idle. I try ?refresh? etc, to no effect. I have rebooted a few times, still no good.I have never had any problems before.I have no problems downloading from other sites.OS is Windows 98SE

Answer:Windows Update site will not load

I may be wrong but I thought that Microsoft stopped supporting Win 98, in terms of updates, some years ago.

2 more replies
Relevance 46.74%

I have Windows Vista Home Premium (x64) Service Pack 1 and the Windows update page will not load. No error messages it will not load. Any Microsoft help or support that leads to anything connected with Windows update will not load. I thought I was getting auto updates, but I am missing 8 important to critical updates. I have even tried downloading IE8 but it gets stuck on the Windows update.

What to do, what to do, what to do?

TIA
 

Answer:Windows update page will not load.

I was in your situation with Vista 32 for 3 months. First thing is to scan for malicious software/rootkits that may have turned off update. If you are confident that is not the cause, then you will need to rename the SoftwareDistribution folder in the Windows directory, something like SoftwareDistributionOld. You may have to first turnoff update in the Services (Administrative Tools) to do this. Reboot, and Update will recreate your SoftwareDistribution folder and you "may" then be able to update. Otherwise, like in my situation, you have a lot of heartache and google searching to do. I had to run a bits.reg routine to fix my bits (background Intelligent Transfer Services) in my registry; then I had to reregister a boatload of dll's. TurboTax 2008 had poorly installed and corrupted a number of files and registry entries.

Good luck.....
 

1 more replies
Relevance 46.74%

Hello everyone,

When I try to load the menu it won't load, it just looks like this and stays like that for ever, nothing will pop up. Here's a screenshot.

Imgur: The most awesome images on the Internet

Answer:Windows update menu won't load.

Anyone?

0 more replies
Relevance 46.74%

Hi,My first post here and I'm wondering if someone can help with my problem since I've completely run out of ideas...For the last few months I have been unable to load Windows Update, Windows Search, or the Personalize Desktop option when right clicking on the desktop.When I click on these items a window will open for a second (completely white) and then close instantly. There's seemingly no way around this and the same is true in Safe Mode.Suspecting a virus, trojan or similar I have run a number of scans (AVG, SpyBot, Ad Aware, Malware Bytes, Kaspersky, Norton, command line sfc, etc). Apart from a few tracking cookies nothing has been found. Running HijackThis also revealed nothing untoward.I've search the MS Knowledge base extensively and not found anything. There are similar problems regarding specific error numbers but I do not get one, just a window that opens then quickly closes. I have tried MS's own FixIt tool for Windows Update and it didn't make any difference.I can still search using the quick search bar in the start menu but clicking "search everywhere" does nothing. I can still change my desktop background by right clicking on an image and choosing "set as desktop background".I cannot run Windows Update. All of my other software is completely up to date.I still suspect that this is some sort of very clever trojan rather than an OS error but since I'm not getting any error messages I can't be sure.Any advice wou... Read more

Answer:Windows Update/Windows Search/Personalize Desktop will not load

Can you run regedit?

Access the Microsoft website?

Update your installed AV program?

What other system anomalies exist?

Louis

3 more replies
Relevance 46.74%

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

More replies
Relevance 46.33%

On 12/8, I updated Windows 10 on my laptop (a Dell Latitude E6510) and after an hour of the update running, the laptop restarted, "Attempting repairs" came up, and from then on none of the options to get back into Windows worked. Couldn't restore (it claimed I had no previous restore point) couldn't get into Safe Mode (what Win10 is calling Safe Mode, anyway), and when I removed the SATA drive to connect it to my desktop computer as an external to make sure I had all my personal files, Windows read the drive as G: Reserved Space and H: Empty. When I tried to open the "empty" H: drive, it said it needed to be formatted. I'm not falling for that.Basically I need to recover five files out of the Desktop folder. I know they have to be there, I'm just about ten years out of the loop with data recovery. :)

Answer:Windows 10 won't load after update, how to save some files?

Leave the drive connected to the PC & try these.Lazesoft Data Recovery Homehttp://www.softpedia.com/get/System...http://www.lazesoft.com/download.htmlWise Data Recoveryhttp://www.softpedia.com/get/System...http://www.freewarefiles.com/Wise-D...http://www.freewarefiles.com/screen...http://www.wisecleaner.com/wisedata...Recuvahttp://www.softpedia.com/get/System...http://www.freewarefiles.com/Recuva...http://www.freewarefiles.com/screen...http://www.recuva.com/message edited by Johnw

6 more replies
Relevance 46.33%

Well... it didn't take long for me to have issues again. Why does this always happen to me?

Anyway...

After I used CCleaner today to clean up my Windows 10 computer which I do every week (I DID NOT use the Registry one) I started having issues. I couldn't get it to shut down so I had to force shut it down.

When I started it up again I noticed that when I search for 'update' in the search box down next to the start button and I try to click on 'Check for updates' and 'Windows Update Settings' nothing happens. Nothing loads.

I was able to get into Windows update through the regular Settings app though.

This is disconcerting. As far as I know, I have no viruses and this was not occurring when I started the computer after I got home from work. I would prefer not to reset to factory settings either.

I used CCleaner in a similar manner last week and this did not occur. From what I can tell, it is still checking for Windows Update and there are no other issues but this is still a disconcerting issue and I want it to work through the Search.

If someone could help me fix this issue I would really appreciate it. Please help me ASAP.

Thank you.

P.S.: Here's System Information:

OS Name Microsoft Windows 10 Home
Version 10.0.10586 Build 10586
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-L2A1944
System Manufacturer ASUSTeK COMPUTER INC.
System Model TP550LAB
System Type x64-based PC
Syst... Read more

Answer:Windows Update won't load through start screen (please help)

9 more replies
Relevance 46.33%

Well... it didn't take long for me to have issues again. Why does this always happen to me?  Anyway...After I used CCleaner yesterday to clean up my Windows 10 computer which I do every week (I DID NOT use the Registry one) I started having issues. I couldn't get it to shut down so I had to force shut it down.When I started it up again I noticed that when I search for 'update' in the search box down next to the start button and I try to click on 'Check for updates' and 'Windows Update Settings' nothing happens. Nothing loads.I was able to get into Windows update through the regular Settings app though.This is disconcerting. As far as I know, I have no viruses and this was not occurring when I started the computer after I got home from work. I would prefer not to reset to factory settings either.I used CCleaner in a similar manner last week and this did not occur. From what I can tell, it is still checking for Windows Update and there are no other issues but this is still a disconcerting issue and I want it to work through the Search.If someone could help me fix this issue I would really appreciate it. Please help me ASAP.Thank youP.S.: Here's System Information:OS Name Microsoft Windows 10 HomeVersion 10.0.10586 Build 10586Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name DESKTOP-L2A1944System Manufacturer ASUSTeK COMPUTER INC.System Model TP550LABSystem Type x64-based PCSystem SKU ASUS-Noteboo... Read more

More replies
Relevance 46.33%

I did an update from Lenovo which included video drivers, BIOS, and other stuff. Now my computer won't start. I get a BSOD and then the computer loops into the Automatic Repair menu (Windows 8.1). I did a System Restore Point and even though the OS said the recovery was successful, it still won't boot up correctly. Any help would be greatly appreciated.

Answer:Did Lenovo update, Windows 8.1 won't load. BSOD

Are you able to boot into Safe Mode? Does the BSOD name a driver file?

9 more replies
Relevance 46.33%

During the final stage of a windows update my com. shut off. Now I get the motherboard start up screen, with the option to access the BIOS, then it says "Loading Operating System" then it loops back to the bios screen again. I went into the BIOS selected to boot from DVD, and when it asks to Boot from CD to press any key...I do,and it still loops back to the BIOS screen!!! I can't break the cycle.

Answer:Shutdown during win 7 update...windows wont load

Hi,Kindly follow the below mentioned steps in order:1.Confirm Hard Drive is recognized in BIOS. If yes, follow next step. If NO, load BIOS defaults.2.Boot to Safe mode and perform system restore. System Restore will affect Windows system files, programs, and registry settings only. If system restore fails or unable to access safe mode, follow next step. 3.Run Start Up repair from the URL mentioned: http://windows.microsoft.com/en-GB/...4.If the issue still persists, then try running the Hardware Diagnostics. If you get any error code, make a note of the error code. Thanks & RegardsDebbie B#iworkfordell

4 more replies
Relevance 46.33%

Need some help.
I had upgraded to Windows 10 few weeks back and today i downloaded the latest update and installed it.
100% download complete
100% Preparing to Install was done
Then the two wheels kept spinning and the progress bar completed the entire installation and post that it tried to restart the phone, but the phone does not load the OS.
The blue windows icon comes up and after a min it restarts again. This goes on and on and on..
Please help.

Answer:Lumia 730 does not load after windows 10 latest update

Try soft resetting first (press volume down and power button at the same time, hold until the phone vibrates and let go).
Edit: if the soft reset fails, try this Got a blue screen of death installing Windows 10 Mobile? Here's the fix! | Windows Central

more replies
Relevance 46.33%

Hello
 
I have windows 7 running on a HP Pavilion dm4 laptop.  Lately windows is very slow to start -close to 5 minutes just to get to the log in screen.  Also, the updates will not install.  I am getting various error messages and when I try to look them up I get general information.  
 
I have done a disk cleanup, defragged and removed some unneeded programs.  I am going to do the Security Tango also.  
 
What should I try next?
 
Ann

Answer:Windows is extremely slow to load and won't update

Welcome Ann,
If your self help attempts don't clear the problem [I suspect that they may not]. Or if you can't download, install, update and run any of the scanners please quit trying by yourself and go to the Am I Infected forum and get expert assistance.
Continuing to try different things without a plan can make things worse.
 
Dick

51 more replies
Relevance 46.33%

Hi,http://windowsupdate.microsoft.com results in "Internet Explorer cannot display the webpage". Different IE pages open randomly while browsing the web. Defenitely the sign of some virus. I have XP Pro SP3, and IE 8. Under IE's tools > options > Connection > LAN settings I found a proxy server setup. I erased those entries, but it did not help either. I scanned and removed everything with most recent versions os Malewarebytes, SuperAntiSpyware, CCleaner. Netstat indicates that I have several ports connected to different IPs.I also ran HiJackTHis, I'm pasting the result below. Could some one help please.Thank you.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 1:19:54 PM, on 8/16/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Cisco Systems\SSL VPN Client\agent.exeC:\Program Files\Cisco\Cisco AnyConnect VPN Client\vpnagent.exeC:\Program Files\Alwil Software\Avast4\aswUpdSv.exeC:\Program Files\Alwil Software\Avast4\ashServ.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\LogMe... Read more

Answer:Windows update page doesn't load

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.In the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. By doing this and then choosing Immediate E-Mail notification and then clicking on Proceed you will be advised when we respond to your topic and facilitate the cleaning of your machine.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.Double click DeFogger to run the tool. The ap... Read more

4 more replies
Relevance 46.33%

Hi, im atempting to download some Windows for my friend on his laptop but every time i attempt to complete downloading them it stops and i get the message 'Some updates were not installed' and i get the error code '8024200D' and i have no idea why it wont download completely. I dont think he even has Vista service pack 1 so im quite keen to complete the download/s. Has anyone any idea what i can do please?

Answer:Windows Vista Update wont load 100%-Help!

You can use Googleclick here

3 more replies
Relevance 46.33%

Ok so i decided i would update my BIOS as i saw there was a new BIOS available at the dell website

I have a Inspiron 1100 2.2Cel, 512 Ram, 30GIG
I had a A29 BIOS and was updating to A30, So i downloaded and started the BIOS update it starts installing and has to restart as it restarts all is fine till it gets to the windows splash screen and it comes up with a certain boot file is missing in system32 ( I didn't get chance to see the specifics as i wasn't expecting a problem) and then straight away it restarts so the BIOS didnt finish installing and from then on it simply just keeps restarting at the splash screen

So i thought i would try Safe mode but the same problem, I then try putting my XP cd in and repairing the windows but still no luck so then i went and instaled a second XP which is now working fine, which relieved a bit as the Computer parse is working just not the original Windows

I now have access to the other windows install to be able to put the missing files in, But my main concern is getting "My Documents" as i have a lot of college stuff which isn't backed up on my USB drive, And when i go to get access it comes up with access denied because it's private

I have tried This
still didnt help

Tried copying some system32 files from the fresh install to the old see if the file might missing might have been added but still no luck

I did a virus scan and the scanner was able to scan the files in the "My Docume... Read more

More replies
Relevance 46.33%

I recently went to use Windows Update. Once I opened Windows Update, Internet explorer came up and couldn't connect to the update page. So I went to your chat room and was told to post a log of what a virus scan showed. So here it is :S
SpyBot Search & Destroy Log:

--- Report generated: 2009-07-22 06:27 ---

FunWebProducts: [SBI $561F0D2E] User settings (Registry value, fixed)
HKEY_USERS\S-1-5-21-1609600684-84054450-2037427041-1008\Software\Microsoft\Internet Explorer\MenuExt\&Search\=...http://edits.mywebsearch.com/toolbaredits/menusearch.jhtml...

FunWebProducts: [SBI $8CC75C5A] Settings (Registry value, fixed)
HKEY_USERS\S-1-5-21-1609600684-84054450-2037427041-1008\Software\Microsoft\Internet Explorer\URLSearchHooks\{00A6FAF6-072E-44cf-8957-5838F569A31D}

FunWebProducts: [SBI $E2D974B3] Settings (Registry key, fixed)
HKEY_USERS\S-1-5-21-1609600684-84054450-2037427041-1008\Software\Fun Web Products

MyWay.MyWebSearch: [SBI $6404C538] Settings (Registry key, fixed)
HKEY_USERS\S-1-5-21-1609600684-84054450-2037427041-1008\Software\Microsoft\Windows\CurrentVersion\Ext\Stats\{07B18EA1-A523-4961-B6BB-170DE4475CCA}

MyWay.MyWebSearch: [SBI $B1C70274] Browser helper object (Registry key, fixed)
HKEY_USERS\S-1-5-21-1609600684-84054450-2037427041-1008\Software\MyWebSearch

MyWay.MyWebSearch: [SBI $... Read more

Answer:Windows Update page doesn't load

Could anyone please help?

4 more replies
Relevance 46.33%

I'm working on my mom's computer remotely via LogMeIn (Home Premium SP2). A persistent problem is an inability to update the system due to the Windows Update giving me a "The page failed to load" error. This happens after I click on the "15 optional updates are available" hyperlink in the Windows Update pane. There are no critical updates.

An initial Google search returned the most common cause as being "WindowBlinds" by Stardock. This program, however, is not installed on her computer (verified by a search of programs in the "All Programs" links, "Program Files" folder, "Uninstall or change a program", and a search for "stardock" in the registry.

"sfc /scannow" in administrative mode on the command line failed to return any errors.

I also went to Microsoft's relevant Knowledge Base article here and attempted to use the Fix It program to fix Windows Update. The program successfully ran and fixed the files that were damaged (whatever they happened to be), but this did not solve the issue.

Finally, I removed threats using SUPERAntiSpyware, reregistered some .dll files as recommended by Microsoft (IMPORTANT NOTE: Some of them failed), and restarted with non-essential services disabled and startup items disabled.
 

Answer:Windows Update > The page failed to load

bump
 

1 more replies
Relevance 46.33%

My G550 Laptop now won't load Windows10 after the latest enforced update. I get the initial Lenovo screen with F2 options etc then the blue Windows logo followed by Attempting to recover installation then Restoring your previous version of Windows then back to the Lenovo screen. Any thoughts?

More replies
Relevance 46.33%

I need help!i know a bit more than the average person about computers and i can usually resolve my computer issues on my own but im stumped! the first time i had an issue was a couple months ago when amd prompted me to update my graphics driver, so i did....after updating  i restarted the computer and i would get to the windows loading screen then,  a black screen with just the loading "ring" shownig. i restarted the machine a few times asnd got the same thing,  so eventually i got to the startup repair screen and i used system restore to bring the computer back to the point before i installed the new driver. after that it worked fine for a few months.  just last week i had the same issue with the black loading screen so i did a system restore again andt windows loaded fine after that, until the screen went to sleep then it refused to come back on and would not boot up again. i had not updated the graphis driver so im not sure what caused it this time and since then thats what has been happening i have tryed restarting it time after time and it will eather freeze at the black loading screen, or will  boot into windows very slowly, then crash again. i have also tryed system restore a few more times and it just boots up once then crashes again i have even tryed repalcing the hard drive and putting a fresh windows 10 install on it and it, but  just does the same thing again. the strangest thing for me is that it seems t... Read more

More replies
Relevance 46.33%

I cannot access windows update on my computer, which is running windows vista. I also get a redirect for some Google links (usually only the first result) and when I open my browser a tab for a Walmart gift card opens as well. I don't know if its related to these but a box about my host process for windows services closing has started to appear as well.

Answer:Google redirect and windows update will not load

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

11 more replies
Relevance 46.33%

I have a Windows Vista Home Premium, 32 Bit, Service Pack 2.
OK so my first problem is the Windows Update. After going to Control Panel > Windows Update, a page come on saying "Page Fail To Load". How can I fix this?

 

More replies
Relevance 46.33%

I have Power Suite on my computer and it said I had 6 outdated drivers which I updated. Now my Windows won't load. It gets to my desk top background, but can't even load the program icons. Then it starts the same process all over. I'm sure one of the updated drivers is the issue, but I can't get the computer to start in order to try System Restore. What can I do? I'm not very computer savvy, so go slow..

Thanks!

Answer:[SOLVED] windows won't load after driver update- xp

This is the reason it is best to get the driver from the manufacturer website. Most Driver Finder software will recommend incompatible drivers.

I see no beneficial reasons to using Power Suite software.

Boot the PC into Safe Mode. Once logged in run a System Restore

Restart the PC > repeatedly tap F8 during boot > at the Advanced Options choose Safe Mode

6 more replies
Relevance 46.33%

After installing most recent critical update, my computer restarts and I get a balck screen with a little window that says "Setting up personalized settings Desktop Update" or something of the like (may have left a word out) and it never goes away. I can pull up task manager, end task, but explorer.exe also ends. If I then run task explorer.exe, the little window comes back.

I've system restored to before the update and I'm fine, then windows reinstalls the update and I have the same problem. UAC is off, i'm on admin account.

What do?

Answer:Windows Desktop won't load after most recent update

Use system restore and set update to not to do automatic. When the update comes just right click on it then, hide.
Windows Update Settings - Change

http://www.sevenforums.com/windows-u...n-updates.html

6 more replies
Relevance 46.33%

All out of sudden my windows update feature stopped working properly. Whenever i try to search for updates it just keeps on searching for hours, without finding anything. If i try to troubleshoot the windows update feature, it stops at "searching on the internet". When i try to install standalone packages
(Windows6.1-KB3020369-x64) + (KB Windows6.1-KB3172605-x64) it also hangs up and searches forever. Please someone help, i feel like my computer needs some updates now soon. I see this have been updated, i dont know if it was before or after my windows update got broken. But it was atleast 5 days ago. If it is SP1 platform update then i did it myself, if it is not, i dont know. And i dont know if i did it myself --> Update for Windows (KB2670838)

More replies
Relevance 46.33%

So last night I shutdown my computer but there was a update with that aswell, This morning when I go to turn my computer on, It loads up MSI and then i get a black screen with a White blinking line at the top left of the screen, It wont load up windows ive tried restarting my pc aload but i can't find any answers, I know little about computers.
Any help is appreciated

Answer:Windows update last night, PC wont load now

op system?
if 8 or 10 then attempt to boot at least 5 times and winsows should then detect a problem and boot to the advanced tools (REcovery enviroment) where you can try a startup repair or a system restore.

3 more replies
Relevance 46.33%

Well windows was updating and i restarted because of an emergency and now the applications wont load. Explorer stops responding. Winamp opens after 10 minutes. Tried running sfc scan but it didn't help? What do i do?

Answer:Restarted during Windows update and now applications won't load

Ok now i decided to do a repair installation but every time i click on setup.exe it never starts and just keeps loading. Restarted in safe mode and the setup runs but it says that i cant do a repair install in safe mode. I then go to msconfig and do a selective startup. Setup starts but i get an error "Windows cannot determine the hard disk". So frustrating? Any way to do it?

4 more replies
Relevance 46.33%

I bought my HP notebook 15-ba004AX 4 months ago, and installed Windows 10 from my company. After couple of months of using and get Windows 10 update regularly, I noticed that Windows 10 won't start after installing specific update. Unfortunately I can't specifically point what update that made my windows failed to start. I try to recovered my windows using windows 10 repaired tool but it end up failed and I have to reinstall my windows 10 all over again. This problem occurred 3 times now, and it irritates me. And now power button on my notebook act weird, I need to push it twice before it can power up cause push it one only make notebook "on" four a few second. I really need a solution for my notebook. Is it hardware failed? Or Windows 10 update failed?

More replies
Relevance 46.33%

I did a windows update today, all went fine, but the next time I started up I got a message

"The system found unauthorized changes on the firmware, operating system or UEFI drivers"

Could get into BIOS and that was it. No changes made any difference. Drives detected fine. tried the windows disk to make repairs, and got the message it was not a compatible windows installation. Tried a google search and found the solution straightaway- seems its common.
There is a win update that causes the problem (thanks MS, great support there). To solve it, go to bios, advanced, find "secure boot" (varies on systems) and ser to "Other OS". Sounds weird but I tried and all was good again.

Putting this up as an assist for others- the worst part being that its a problem windows creates, and without knowing the fix, doubt it would get found.
 

More replies
Relevance 46.33%

I installed the latest Windows updates this morning and my laptop is now taking an age to load.  No messages about updates installing or anything like that.
 
Once it finally uploads, I'm looking at the old Desktop, and I can't get the Apps screen to show.  Nor do the Settings come up when I go to the bottom right-hand corner.  
 
I am able to use most things I need by using the Desktop but it's obvious there's something not right!  

Answer:Since latest update, Windows 8.1 features will not load.

This may seem overly simplistic, but have you tried restarting the computer?
 
If this doesn't resolve the issue, go to the Control Panel and click/tap on Programs and Features.
 
In the upper left portion of the window click on View installed updates.
 
These updates are dated, so you should have no problem finding the update/s that you installed last.
 
Post what the update/s are.
 
Edit:  If there were no integrity issues found in the scan a log may not be available.

10 more replies
Relevance 46.33%

When I try and install the update for my video driver and the latest Windows update (Windows Genuine Advantage Validation Tool (KB892130), I get an error message saying: "Windows could not load installer for display. Contact your hardware vendor for assistance".

Also (and I don't know if this is related or not, I am unable to view "properties" from my desktop or to change screensaver/background themes from the control panel).

From googling the error message, I suspect that it has something to do with my video driver but I'm not certain.

I'm not sure what specs you need re: my computer. Here are the basics, if you need more, let me know.

Dimension 2400

Intel(R) Pentium(R) 4 CPU 2.66GHz
Version: x86 Family 15 Model 2 Stepping 9
Speed: 2657 MHz

Microsoft Windows XP Home Edition
Version: 5.1.2600
Service Pack: 2.0
Location: C:\WINDOWS
PID: 55277-OEM-0011903-00102
Hot Fix: KB943460

Video Cared
Model: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Driver: ialmnt5.sys
Tuesday, April 15, 2003
Supported

Sound Card
Manufacturer: Analog Devices, Inc.
Model: SoundMAX Integrated Digital Audio
Driver: smwdm.sys
Friday, February 28, 2003
Supported

Any suggestions or instructions for correcting the problem would be greatly appreciated.

Thanks,

Charles
 

More replies
Relevance 46.33%

you've probably heard this before but everywhere I look forums only tell of how to fix or temporarily fix it. What caused this problem in the first place? also, I keep hearing about this thing called windows blinds but everytime I type it in on google it just shows actual window blinds for houses in the results.

I think my pc may have registry problems. If i fix those with the right software will everything be normal again? sometimes when I play my games it also just shuts down unexpectedly telling me a prob caused it to close.

Don't mean to sound like a noob for this stuff but it kind of bugs me how you have to do so much research and be a tech genius in order to use windows right. I mainly want to know about this stuff because I play crysis alot and it has taught me to fix and reconfigure things on my pc in order for it to run better and I'm happy about that but I don't really want to be a techie or pc enthusiast and have to go to computer school for 4 years just so I can run my game perfectly! its driving me nuts. so any help on what I can do to solve this? know its my fault for downloading freeware and things like that when I wasnt as knowledgeble but after this gets resolved I think I know enough about pc's now to prevent any future problems. thanks guys.

Answer:page failed to load in windows update?

If you really have message "The page failed to load" then I suspect it is caused by Windows Blinds or Stardock Colors or something another from Stardock if you have
Read all reports from here:The page failed to load, Vista Update

1 more replies
Relevance 46.33%

Please someone help me with this.my windows update window is not load properly.i attach a snapshot on it.

Answer:Windows Update Window is not load properly

Hello dhammikammd123, and welcome to Seven Forums.

Looks like you have a custom skin that could be responsible.

You might see if running a sfc /scannow command, or doing a system restore using a restore point dated before this happened may be able to help.

Hope this helps,
Shawn

3 more replies
Relevance 46.33%

when attempting to load Windows update page I get error message 0x800A1391. I followed the instructions given to clear the problem but no success. Anyone had this problem and any suggestions.

Answer:windows update page wont load

managed to clear it. Mobile code control was switched on in Zone Alarm..Switched it off and hallelulah

2 more replies
Relevance 46.33%

I'm hoping someone can help me fix this. I'm running Vista Home Premium 32-bit. In the bottom right if my taskbar it tells me update are ready to be installed, but when I click on it it says " The Page Failed to Load".

Answer:Windows Update Page Failed to Load

If you have installed Windows Blinds then surly this program is responsible for this issue

our commemorative book:The page failed to load, Vista Update

3 more replies
Relevance 46.33%

Well... it didn't take long for me to have issues again. Why does this always happen to me?  Anyway...After I used CCleaner yesterday to clean up my Windows 10 computer which I do every week (I DID NOT use the Registry one) I started having issues. I couldn't get it to shut down so I had to force shut it down.When I started it up again I noticed that when I search for 'update' in the search box down next to the start button and I try to click on 'Check for updates' and 'Windows Update Settings' nothing happens. Nothing loads.I was able to get into Windows update through the regular Settings app though.This is disconcerting. As far as I know, I have no viruses and this was not occurring when I started the computer after I got home from work. I would prefer not to reset to factory settings either.I used CCleaner in a similar manner last week and this did not occur. From what I can tell, it is still checking for Windows Update and there are no other issues but this is still a disconcerting issue and I want it to work through the Search.If someone could help me fix this issue I would really appreciate it. Please help me ASAP.Thank youP.S.: Here's System Information:OS Name Microsoft Windows 10 HomeVersion 10.0.10586 Build 10586Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name DESKTOP-L2A1944System Manufacturer ASUSTeK COMPUTER INC.System Model TP550LABSystem Type x64-based PCSystem SKU ASUS-Noteboo... Read more

Answer:Windows Update won't load through start screen (please help)

You need to do a few cold boots to get rid of the interrupted update hang...then go ahead and run manual updates.

14 more replies
Relevance 46.33%

Hi,
I'm having a major issue with my PC since installing the last Windows update yesterday (1703, Creators Update). As soon as the update installed, my PC restart and loaded into Windows with no problems. I then turned my PC off for the night. When I went to load up the PC this morning, you can see exactly what happens in the short video I uploaded to Youtube (click here It just gets to the ASUS screen, and basically stays there forever. I left it on for 3 hours earlier, and it was still at the same screen when I came back.
I can move the mouse and the keyboard is responsive though. When I press CTRL+ALT+DEL, the mouse even does that little loading icon, so I know something is going on behind the stuck loading screen. It's like Windows has loaded properly in the background, but the loading screen won't go away for some reason.
I'd massively appreciate some help with this, thank you!
[u]My PC specs are[/u]:
[b]OS[/b] - Windows 10 64 Bit
[b]CPU[/b] - Intel Core i5 6600k 3.5Ghz
[b]Video Card[/b] - Nvidia Geforce GTX 970 4gb
[b]Ram[/b] - 16gb DDR4
[b]Storage[/b] - One SSD which has Windows installed, and a HDD for various misc files.

More replies
Relevance 46.33%
Answer:Windows Update Page Fails To Load

Try getting the latest update agent and see whether it helps:
Information for network administrators about how to obtain the latest Windows Update Agent

3 more replies
Relevance 46.33%

I am using Windows 7 Professional with Service Pack 1.
Windows Update has lost my update history and hangs when I tell it to check for updates. Windows Update Troubleshooter reports "Windows Update error 0x80070057(2016-07-15-T-12_59_34P) Not Fixed". How can I get Windows Update working again?


Here is a detailed account of the problem:
Earlier today, I ran Windows Update and told it to install 15 important updates. It said it was downloading them, but stalled for 30 minutes at 0% done.
I rebooted my computer and re-ran Windows Update. It reported that there were no pending important updates. I clicked "View update history" and saw that the most recent 15 important updates had failed. I clicked "Check for Updates" and,
when it finished checking, Windows Update continued to report that there were no pending important updates.
At that point, I concluded that something was wrong with Windows Update. In an attempt to fix it, I downloaded and ran the Windows Update Troubleshooter (WindowsUpdateDiagnostic.diagcab). It reported one problem found: "Windows Update error 0x80070057(2016-07-15-T-12_59_34P)
Not Fixed".
After running Windows Update Troubleshooter, I re-ran Windows Update. It reported that my most recent check for updates was "Never", and that updates were installed "Never". When I clicked "View update history" I saw an empty
list. When I clicked "Check for updates", the applicat... Read more

More replies
Relevance 46.33%

Wouldn't even let me post a message to this forum.


Testing again!

Answer:Windows update won't load, windows running slow NEED HELP.....PLEASE!

Why can't I post anything other than simple stuff????????

19 more replies
Relevance 46.33%

I have a problem loading many things such as windows update, the windows search(the search within windows) and some other things. I think it may be active x or something, but it is enabled in IE so I'm not sure what the problem is.

This is a fairly old computer. I just recently had a problem with Windows Activiation, but I've had it for years. The window would not load for activation so I ended up using a crack. I ran virus scans with AVG and the such and cleaned up the computer.

Answer:Can't load windows update, windows search, and other things

Updates are probably being an issue due to the crack - if that's the case, we're unable to support you.

If you copy is legal, all you have to do is contact Microsoft for valid key :-)

4 more replies
Relevance 46.33%

I purchased a refurbished Dell e6410 about a year ago.   The Laptop was working find with no issues.   But in mid August, I did a windows 7 update...   After the update, windows restarted...   But instead of booting up to windows...  It went to "startup repair".   It ran this several times until is said it could not repair the startup.
I ended up having to do a recovery and reload windows and re-image my HD...   After doing that, I tried windows update again.   Same issue.   after windows update...   It would just got to startup repair.
Again, I had to restore my OS and re-image my drive.   I tested and checked the HD and go no errors.  Ran disk check and disk check /r...   But if I tried to run a windows update it would just go into startup repair and I would eventually have to just reload my os and re-image the drive.
I spoke to an agent from Dell about it...   He suggested I wait a month before trying to do the windows update.   Perhaps they have a bug.     
So I waited two months and tried an update again, last night.   This time, I would get the dell logo, with f12 option, that would go away and then "windows is loading necessary files", but then the screen would go black and dell screen came up gain, then "windows is loading necessary files".   I let it do this for almost an hour.   Windows never started...   I had no option to get ... Read more

Answer:Dell e6410 Windows 7 will not load after doing a windows update

You aren't starting from a clean install so anything goes
SFC /SCANNOW may be an option. There is also a windows update tool fix.
 http://support.microsoft.com/kb/971058
 

3 more replies
Relevance 46.33%

Sorry to everyone.This report is an mistake. The PC which is fixed by Combofix is very well.The new problem PC is another.After all of steps in Thunder's post, WindowsUpdate is fixed.But My Neighborhood still can't work.I try to set another PC's IP as 192.168.0.1, and myself PC's IP as 192.168.0.2.Then ping 192.168.0.1, there is no request sent back.But when I ping my PC from another PC(ping 192.168.0.2), it's work.I can see my share folder from another PC, but can't see another PC on my PC.I try to reinstall network card driver, but no help.My PC can use PPPoE to connect Internet now.My system is WinXP-SP3How can I FIX this ?Thanx for help....

Answer:After "Windows Update error 80244019; DNS address 85.255.112.107, How to fix my Windows Update Error"

This report is an mistake.Thank you for letting us know. Since this issue seems to be resolved, this thread will now be closed.In case you experience any problems with the computer, please Start a new topic.Happy computing,Orange Blossom

1 more replies
Relevance 45.92%

Windows Vista update page will not load with information or work.
When I launch windows update in vista the page comes up blank. It gives the appearance that it is still loading. The only way to get rid of the blank page is in "start task Manager". In Task Manager it (windows update) is shown as running. There are no error messages.

Operating System
Windows Vista Home Premium Service Pack 2 (build 6002)
ZoneAlarm Security Suite Antivirus Version 8.0.298.035
 

Answer:Solved: Windows Vista update page will not load

13 more replies