Computer Support Forum

Destination host unreachable

Question: Destination host unreachable

I have a NAS device with an LED link that displays it has a connection. However, when I attempt to ping the device I am getting an error saying "Destination host is unreachable". What is confusing to me is that the results say that all packets sent were received, 0% loss. Does anyone have a suggestion as to what I am doing wrong? Thank you in advance.
C:\>ping 192.168.168.190

Pinging 192.168.168.190 with 32 bytes of data:
Reply from 192.168.168.59: Destination host unreachable.
Reply from 192.168.168.59: Destination host unreachable.
Reply from 192.168.168.59: Destination host unreachable.
Reply from 192.168.168.59: Destination host unreachable.

Ping statistics for 192.168.168.190:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\>tracert rpncnas01

Tracing route to rpncnas01.rpltd.com [192.168.168.190]
over a maximum of 30 hops:

1 PORCHE1.rpltd.com [192.168.168.59] reports: Destination host unreachable.

Trace complete.

C:\>pathping rpncnas01

Tracing route to rpncnas01.rpltd.com [192.168.168.190]
over a maximum of 30 hops:
0 PORCHE1.rpltd.com [192.168.168.59]
1 PORCHE1.rpltd.com [192.168.168.59] reports: Destination host unreachable.

Computing statistics for 25 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 PORCHE1.rpltd.com [192.168.168.59]

100/ 100 =100% |
1 --- 100/ 100 =100% 0/ 100 = 0% PORCHE1.rpltd.com [0.0.0.0]

Trace complete.

C:\>

Relevance 100%
Preferred Solution: Destination host unreachable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Destination host unreachable

How is it connected by Wireless or hard line.

Can you ping it by the host name?

4 more replies
Relevance 105.78%

Hi,

I have frequent internet connection lately after buying a new wireless router after the old one got broken.. I tried pinging the google to know whether i am still connected or losing my internet..

After few minutes there will be a Request Timeout followed by Reply from (My WAN IP) : Destination Host Unreachable

Linksys E900 300mbps

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Admin>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : win-xp-sp3-2010
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 00-25-22-DE-9E-4B

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TP-LINK 150Mbps Mini Wireless N USB
Adapter
Physical Address. . . . . . . . . : 90-F6-52-E1-2D-FC
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.138
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168... Read more

Answer:Destination Host Unreachable

Lets take it in a few steps. Try pinging your gateway 192.168.1.1 to see if we get errors. If not, then ping your DNS servers (124.106.6.2 & 124.106.4.2). Then try pinging 108.175.7.71. What are your results?
 

9 more replies
Relevance 105.78%

Dear Friends,
We have connected four computers with one server machine. All four machines connected through one switch. out of four computers, three computers are not pinging with the server sometimes. so, I uninstalled the network driver and installed. but, now also that three computers are not pinging with server. but, the same time pinging with any other computer, it is pinging.

So, Anyone can help for this problem...how I can solve this....

thanks in advance.....
 

Answer:Destination Host Unreachable

8 more replies
Relevance 105.78%

Hi,
My question is:-
i have a server which do not accept the ping request and throws destination host unreachable when i try to ping it from some of my client machines.  i have done so far is :-
1) TURNED ON THE NETWORK DISCOVERY ON THE CLIENT MACHINE.
2)TURNED OFF THE FIREWALL ON THE CLIENT MACHINE.
 nothing is working.  please help..

thanks in advance for a working reply.

More replies
Relevance 105.78%

I'm trying to set up a network between two computers to run a track meet. I've followed the directions according to the instructions, setting up the TCP/IPv4 correctly on both computers. When I ping the 2nd computer I get a destination host unreachable message. How do I fix this?
 

Answer:Destination Host Unreachable

mcarrow said:


How do I fix this?Click to expand...

First step is to trouble shoot to determine the cause.

If you want help from somebody you need to describe your network and computers (with respect to the network).
 

2 more replies
Relevance 105.78%

I have searched everything and tried everything. Have an HP Desktop Pavilion. Purchased a MFC 8950dw Printer. One Desktop in the office Acer M3470 connected without Disks, system works beautifully. We have a Linksys wireless router. On the HP Pavilion nothing works. Continue to get "destination host unreachable". Here are the specks. Any help other than what's already been offered? I removed all firewall trying to make that work.
 

Answer:destination host unreachable

You need to tell us what the problem is, not what error you get. What are you trying to do? What are you pinging? Is the HP Pavillion connected to the router via WiFi or cable? Can it connect to the Internet?
Any other pertinent information would help.
 

1 more replies
Relevance 104.55%

hi all, i have my xbox and my router all on the same router, my subnet is the same and they are on the same network , im trying to media share from my windows 7 to my xbox 360, when i ping my xbox ip i get this:

C:\Users\Tippee>ping 192.168.11.8

Pinging 192.168.11.8 with 32 bytes of data:
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.
Reply from 192.168.11.7: Destination host unreachable.

Ping statistics for 192.168.11.8:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\Tippee>

i have turned on every file sharing option i can find ( i think ) i tryed this without my firewall on, same thing. please help me this is doing my head in!

Thanks very much

Tippee

Answer:ping; Destination host unreachable

Is there a default gateway option that you can put in for the xbox?

9 more replies
Relevance 104.55%

To put it simply, I'm just trying to successfully ping machines attached to a hub for now. Here is the setup:

5 Port ethernet Hub
Computer connected to port 1
Linux machine connected to port 2
Linux machine connected to port 3

Both linux machines have (different) static IP addresses. None of this is connected to any outside network, internet, etc. I don't know what I'm doing wrong with this setup because I can't successfully ping the Linux machines from my computer and I'm not sure what the issue is.
 

Answer:Ping-Destination Host unreachable?

Are the assigned ip address to each machine on the same subnet?

for example if I set the following ip addresses

1 - 192.168.1.1 with a subnet of 255.255.255.0
2 - 192.168.1.2 with a subnet of 255.255.255.0
3 - 192.168.1.3 with a subnet of 255.255.255.0

so each computer is on the 192.168.1 network.
In this example each computer would be able to ping each other.

if each computer was configured on different networks like the following:

1 - 192.168.1.1 with a subnet of 255.255.255.0
2 - 192.168.2.1 with a subnet of 255.255.255.0
3 - 192.168.3.1 with a subnet of 255.255.255.0

In this case each computer is on a different network 192.168.1, 192.168.2, and 192.168.3, so in this example the only way for those computers to talk to each other is if a router was in place on each network. Without a router you would get network unreachable or something to that effect.
 

2 more replies
Relevance 104.55%

I am running a ASP.net website on Windows 8.1 with IIS and all morning I could access the website. By afternoon I could not access the website. I did not make any changes. I ping the website and my computer IP address and I get: Reply from 192.168.0.3: Destination host unreachable. I am new to networking. Can anyone give me any help as to how to go about fixing this?
 

Answer:Reply from 192.168.0.3: Destination host unreachable

12 more replies
Relevance 104.55%

I have done with network of 8 networks then 4 LAN's as departments.
First I have done successfully the connect from LAN 1 to LAN 2 and I can ping all hosts from LAN 1 to LAN 2 in both network and vice versa using RIP routing.
Second when I need to do same thing but I need LAN 3 to reach all LAN's and Facing Destination host unreachable problem.

what I should be do.
I hope you can help me to find where my mistake to solve it.

Thank you very much.
 

Answer:Solved: Destination host unreachable.

Given that you are using RIP (an old routing protocol not used in current production environments), and the name of the file you attached is "assignment2", I think it's safe to assume this is a school assignment.

Unfortunately we cannot provide assistance with school assignments here.

I have asked for an administrator/moderator to stop by your thread.
 

2 more replies
Relevance 103.73%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3894 Mb
Graphics Card: Intel(R) HD Graphics, 1723 Mb
Hard Drives: C: Total - 99673 MB, Free - 32642 MB; D: Total - 153599 MB, Free - 84942 MB; E: Total - 153598 MB, Free - 102998 MB; F: Total - 69712 MB, Free - 57533 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: Net Protector 2015, Updated: Yes, On-Demand Scanner: Enabled
I have 1ADSL Router DLINK 2750u (IP 192.168.1.1). 1 PC (win7) connected through LAN(IP 192.168.1.34) and 1 LAPTOP (win7) connected through WIFI (IP 192.168.1.35)
when i ping he says destination host unreachable
C:\Users\nilesh>ping 192.168.1.34
Pinging 192.168.1.34 with 32 bytes of data:
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.
Ping statistics for 192.168.1.34:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
help me thanks
 

Answer:Solved: ping destination host unreachable

9 more replies
Relevance 103.73%

I have got a new belkin router and trying to connect internet but unable to do so. I am getting internet thru LAN cable if directly inserted in my PC but unable thru the router.

Please help.
 

Answer:Belkin f9k1009v1 destination host unreachable

8 more replies
Relevance 101.27%

Hey Everyone! I'm having some bizarre issues with all of my Lenovo W530/W540's.  I'm not sure when the issue started, the first time it was reported to me was around March, and it has been persistant since the issue was discovered.  The issue is that, quite frequently, our Lenovo W530/W540's will get Destiantion Host Unreachable if I run a continuous ping (ping -t ...) to anything outside our firewall. I have run a ping to things inside our firewall (other computers/servers, etc.) and they will return good ping until the cows come home. However, if I try to ping anything outside our firewall (google.com, google DNS 8.8.8.8, yahoo.com, etc.) about every 30 seconds (every 30-35 returns) it starts returning Destitnation Host Unreachable from our Firewall.  This will last for around 10-25 returns, and then traffic goes back to normal. We are a majority Apple Shop, and when I attempt to ping from any Apple on the network, it get fine returns consistently.  I also tried pinging from the few non-Lenovo Windows Machines we have as well (my personal machine which is self-built Windows rig, a couple of windows test machines, and a Windows 2008 Server we have) and they also have consistently good returns as well. It is ONLY the Lenovo's that have this problem.  To compound things, they have no issue when they are connected to a different network other than the company network.  This ONLY happens when they try to interact with traffi... Read more

Answer:Lenovo W530/W540 Getting Destination host Unreachable from our Firewall

Wireless or wired? If you have a hardware firewall, is there also a software firewall set? (Norton, windows, etc) Is the network set up as public, home or work?

4 more replies
Relevance 92.25%

Whenever I try to access www.dlink.com (or subdomains), or www.dzone.com, I get a "Connection closed by remote server" error in Opera (similar messages in other browsers).

When I try to ping or tracert either of the hosts, I get a "Destination host unreachable" error.

This has also occurred on other websites, which I cannot remember right now, and occurs with both Optus (my ISP) and OpenDNS as dns servers.

It also seems to be intermittent. Yesterday, I was able to access www.dzone.com without any issues for some time, yet today and the day before, this error was occurring.

Also, possibly unrelated, the website www.tv.com is extremely slow when loading.

Does anyone have any ideas as to what the issue is?

The traceroute and ping work fine from network-tools.com, so it must be something from my end.

The IP's are resolved correctly (when I ping or tracert, the IP shown is correct according to OpenDNS's cache). However, when typing either the hostname or the IP in the address bar, I still get the error.

Thanks for reply.

Edit: Also, a ping from my router is "successful", ie: in firmware, there is an option to ping hosts, and this returns successful. All firewalls are disabled.

Additionally http://www.dictionary.com does not work, but the basically aliased http://dictionary.reference.com/ does. However most of the images in http://dictionary.reference.com are served from http://sp.ask.com/ which doesn't load, whereas http://ask... Read more

Answer:Unable to access certain websites: "destination host unreachable"?

Sounds like you've got a DNS issue. Those are handled by your ISP, so you're pretty much screwed if that's the problem. Here's how to check your DNS connections:

1. Open a command prompt Start -> Run... -> cmd.
If you're using Vista, the command prompt is under the Accessories Menu.

2. At the prompt, type ns lookup, and hit enter. This puts your command prompt into Domain Naming Service lookup mode, meaning you can try to resolve websites' names and ip's from their websites.

3. Type the web address of a known website, such as yahoo.com or google.com, and hit enter. You should get the name and the ip address of the site in the command prompt window.

4. Once you've found one that works every time, this will be your Control site. You know it works, so you use it to check your connection.

5. Now, use the address of one of the sites that's not working. If you do get a reply from the site, then the problem isn't with your ISP. You'll need to check your connection speeds and other network settings to test the problem further. If the websites don't resolve, contact your ISP, and tell them their DNS isn't working properly. You're going to need to get to someone fairly high up the food chain, so be ready to be really patient for that part.
 

3 more replies
Relevance 91.84%

TSG info :
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 8110 Mb
Graphics Card: NVIDIA GeForce GTX 870M, -1 Mb
Hard Drives: C: Total - 121074 MB, Free - 4367 MB; D: Total - 934781 MB, Free - 790990 MB;
Motherboard: Micro-Star International Co., Ltd., MS-1763
Antivirus: Windows Defender, Disabled

Hey guys, I'm trying to setup an RMI in java, after struggling with it for a long time I noticed that it's probably not my RMI that isn't working, but that there's something wrong in my networking.
When I asked a friend outside of the city to ping me to test his ability to connect to me, he said the result was Destination Host Unreachable. After a lot of googling I got explained that this is likely a physical problem, which is weird because I have perfect internet acces. I've disabled all my firewalls, and googling this problem is nearly impossible because googling "Destination host unreachable" usually gives results of attempts to ping a local machine from another local machine, not getting pinged from outside of your network. Does anyone have any idea what this could possibly be ?
I've tried:
1. Restarting all network devices in my network.
2. Changing IPv4 settings to a static IP.
3. Activating Remote Access service (failed)
4. Checking all physical cables

If I haven't giv... Read more

Answer:"Destination host unreachable" when pinged from outside my network

10 more replies
Relevance 79.54%

I have the same issue with my computer network connection. And the error message says
192.168.1.1: Destination net unreachable

Can you guys pleae help out on this. I need this very urgently.
 

Answer:Destination net unreachable

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

2 more replies
Relevance 79.54%

Hi,When I ping one IP
Sometimes the below error:
What is difference between?
 Destination net unreachable.
 Destination Host unreachable.

Answer: Destination net unreachable.

Here are answers to your problems
http://www.corenetworkz.com/2009/05/destination-host-unreachable-reason-and.html
http://www.corenetworkz.com/2009/05/destination-net-unreachable-icmp-error.html
For problém diagnostics you will need to analyze output from ipconfig /all, from routing tables when you work behind local network and network analyzer for detailed analysis of packet exchane (Wireshark will do the trick)
Regards
Milos

2 more replies
Relevance 79.54%

Did a trace to help solve some possible instability in my connection. After 6 hops I got the title of the thread. Not sure how to translate it. It may be an MTU size issue? Would appreciate any insights. Thanks

F:\Users\dave>tracert cox.com

Tracing route to cox.com [24.248.75.200]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms esr9850.esr9850 [192.168.0.1]
2 7 ms 8 ms 11 ms 10.65.20.1
3 9 ms 9 ms 10 ms 98.172.172.192
4 9 ms 7 ms 7 ms 98.172.172.129
5 62 ms 73 ms 28 ms dukedsrj01-ge-210.0.rd.at.cox.net [68.1.1.121]
6 lkhndsrc01-pos0901.rd.at.cox.net [68.1.0.5] reports: Destination net unrea
chable.

Trace complete.
 

Answer:Destination net unreachable?

The router at that point has no idea how to get there.
 

9 more replies
Relevance 79.54%

I have a number of XP and W7 PCs in a domain with internet connection, all working fine.

I've wired my Linux laptop to the network, DHCP, and it can talk to other devices on the network. But I can't get connected to any site outside the network - ping to any external address gives "192.168.1.1 Destination Net Unreachable" 192.168.1.1 is the correct address for the router, and any Windows machine can ping to any address via that same router.

Any ideas please?
Stuart
 

More replies
Relevance 79.54%

that was shown when i ping yahoo.com,.
my internet connection is working properly,.
sometimes when i ping yahoo.com i get,.
reply from xxx.xxx.xxx.xxx: bytes =23 time=192ms TTL=46
after 5 to 10 mins.
i get destination net unreachable.,.
can u please help me,.
tnx in advance,.,
 

Answer:Destination net unreachable

13 more replies
Relevance 78.72%

I'm getting this message when I tracert sf.net. No other website is having problems being accessed from my network, only sourceforge. A ping responds with:
Reply from 66.35.250.203: Destination port unreachable.

A tracert responds with 15 successful hops, and then:
16 sourceforge.net [66.35.250.203] reports: Destination protocol unreachable.

I cant figure out where the problem is originating. I created a static route to allow all traffic to this address on my 1710 router. My SDSL modem is able to ping and tracert successfully. Ping and tracert from my Cisco 1710 router gives the unreachable error.
Network setup is:
LAN -------> Cisco 1710 --------> Efficient SDSL 5851

Any help is appreciated.

William
 

Answer:Destination Protocol Unreachable

10 more replies
Relevance 77.9%

The nic is fine, I can ping the nic. Am unable to ping the outside world, I am not using a router, I am using XPPro. Have run Ad-Aware & deleated what it found, have deleated winsock2 & replaced it with a good copy. Have run CW Shredded, nothing found. I have had this problem on several computers & ended up formating the HD & installing a new copy of XPPro to resolve the problem. I have connected my laptop and am able to get out fine, this is a software problem & not equipment. Any help will be greatly appricated

John
 

More replies
Relevance 77.9%

Hi guys I'm new here hope you can help :)
- have seen a similar thread in windows, probably should have been in networking section I apologize.
My internet provider has Wi-fi networks across the city, our tenement house has a receiver.
I am connected to router via cable. With very varied frequency I am getting random packet loss - up to 5% which makes e.g. gaming annoying.
It does so for all websites I tried.

At times there is no packet loss for even 5 minutes, sometimes every 20seconds or so I get "request timed out" followed by "10.6.41.1 destination unreachable"


- Is the issue on providers' site, or between my PC and the router?
-Any solutions to fix this?



Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\VaclavDusek>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : VaclavDusek-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 90-FB-A6-2A-99-9F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::acc2:aaf7:f753... Read more

Answer:Destination Unreachable - 1-5% packet loss

Just to add the ISP got pretty bad reviews about unstability etc.
- just need to know if this is likely on the provider's side

19 more replies
Relevance 77.9%

Linux IPv6 Destination Unreachable problem
Hello,

Please help! I am quite new to network programming and so I tested out a sample client-Server application. The TCP or UDP client is either setup as either IPv6 or IPv4, depending on the server address type input by the user on a command line. The server has 4 sockets, one each for TCP/IPv6, TCP/IPv4, UDP/IPv6, UDP/IPv4. There is no router on this network, and the two platforms are on the same link

The client is able to communicate with the server in following combinations:

1) Client TCP IPv4, Server IPv4
2) Client UDP IPv4, Server IPv4
3) Client TCP IPv6, Server IPv4 using IPv6 mapped IPv4 address
4) Client UDP IPv6, Server IPv4 using IPv6 mapped IPv4 address
5) Client TCP IPv6, Server IPv6 both on same plaforms
6) Client UDP IPv6, Server IPv6 both on same plaforms

However, the following does not work is client and server are on diffent platforms
1) Client TCP IPv6, Server IPv6
2) Client UDP IPv6, Server IPv6

However, the application has a problem connecting. The tracedump6 shows the ICMPv6 message indicating “Destination unreachable”, “Unreachable address”.

The ping6 command from client to server platform works fine. I am at a deadend.

Following are some of the information for debugging. Will appreciate any help I can get in fixing this problem.

>>>>>>>>>>>>>>ifconfig on server platform >>>>>>>>>>>>>>>>>>>>&... Read more

Answer:Linux IPv6 - Destination unreachable

9 more replies
Relevance 77.9%

I keep having an issue with one specific site and the problem is incredibly odd. Every weekend for the last 3 weeks, starting at about 11am on saturday and going through the weekend until monday, the site in question will be totally unreachable from any PC on my network. I can reach it from my phone on VZW LTE, but not from the WLAN. If I ping the site I get an error "Destination Net Unreachable". If I run a tracert I go about 15-18 hops before getting the same error. If I plug the PC directly into the modem, the website is reachable. That definitely indicates a router-side problem. The thing is, the router's configuration hasn't been touched in months, if not years, and the problem is recent. the router in question is a DIR-655, and there is no QOS, no parental controls, nothing that has been manually set up that would obviously be causing this issue. The setup is as barebones as it gets. Again, it is one specific website (pbnation.com), everything else works 100% fine. Any ideas?
 

More replies
Relevance 77.9%

Just happen to read my last attack notice
.
It gave a source IP address
Destination port: N/A
Attack type: ICMP Destination Unreachable

There were four entries of this in 2 minutes, in my firewall log. Any ideas what this is?

Thanks
 

Answer:ICMP Destination Unreachable warning

These are usually just ping entries. Some applications and sites use them just to check on the validity of connections. It's possible someone was scanning ports, but that really depends on the pattern, and more sophisticted scanners use a scattered pattern that is not so easily detected by firewalls.

In any case, it was blocked. In some cases, you may find that you need to allow some ICMP traffic for applications to work correctly.
 

1 more replies
Relevance 69.7%

2 nights ago I purchased a Linksys WPC54GS for my laptop so that I could access the Free Wireless Internet at the motel I was staying at in Ohio, and it worked great. Now I am in a hotel in CA that has free Wireless Internet access also, and my computer says I'm connected, but when I try to access the internet I get "Host is unreachable or DNS server culd not resolve the DNS name." Can anyone tell me what to do to get online?
 

Answer:Host is unreachable

Go down to the front desk and ask them for their network settings/codes etc. See if they can help you since its their network.
 

2 more replies
Relevance 69.7%
Question: Unreachable host

Hi Everyone,

For some reason, I cannot get my digital display sign to play well with my pc. I have had tech help, help from the installer, and trouble shooting myself, etc.

If the following makes any sense to anyone, feel free to share the knowledge. Thanks in advance!

Tracing route to 172.16.192.25 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms CISCOF1948 [192.168.1.1]

2 25 ms 25 ms 25 ms L201.PHIL-DSL-RTR11.verizon-gni.net [71.242.238.1]

3 L201.PHIL-DSL-RTR11.verizon-gni.net [71.242.238.1] reports: Destination net unreachable.

Trace complete.

Pinging 172.16.192.25 with 32 bytes of data:

Reply from 172.16.192.20: Destination host unreachable.

Reply from 71.242.238.1: Destination net unreachable.

Reply from 71.242.238.1: Destination net unreachable.

Reply from 71.242.238.1: Destination net unreachable.

Ping statistics for 172.16.192.25:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Its greek to me!
 

Answer:Unreachable host

6 more replies
Relevance 69.7%

build a 2k3 server, updated it and everything near my desk plugged into the exact same port on my switch, was able to RDP into as many times as I wanted, transfered some files to it, speed was good, everything is dandy. shut it down and put it into its place inside my closet, plug in the ethernet cable into the exact same port....

attempt to RDP and......


tried 3 different ports on my switch, same result, flushed the DNS, restarted the switch, same result....

wtf?? my last option is to take one of my LCDs to the closet and see whats up (LAST resort)
 

Answer:host unreachable... wtf???

probably something dumb...

that kinda crap happens to me all the time....

may as well bring the monitor over, usually you'll waste more time trying to figure it out
 

5 more replies
Relevance 68.06%

Hello everyone.

After recently having a problem re-registering a company's Domain name that had expired without them even knowing about it and waiting for the public DNS records to propogate, their office can now receive emails etc from people outside their LAN but can now no longer send emails from within to outside the LAN. It seems their Exchange server is queuing up all outgoing emails and is giving a error message to senders saying "host unreachable"

Any Exchange Gurus that can help out here?

Didn't change any settings on any of the servers, just registered their domain name and waited for the ISP's DNS records to finish propogating. Do I have reset something like the internal DNS server?

Thanks!
 

Answer:Exchange5.5 host unreachable problem

7 more replies
Relevance 67.65%

Hello TechSupport,

This is the first time I've had to make a post here. I've tried everything I know to fix this problem; direct connect, connected with router, firewall disabled, malware scans, and various cable unplugs for durations of time. Nothing's worked thus far, and this is what I get pinging any server every 5 mins:

Reply from 74.125.127.104: bytes=32 time=48ms TTL=46
Request timed out.
Request timed out.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Reply from 172.16.0.1: Destination net unreachable.
Request timed out.
Reply from 74.125.127.104: bytes=32 time=39ms TTL=46

Connection is wireless, ISP is locally owned and operated (nethop.net), and this has never happened prior to the last two days.

Would someone possibly ping nethop.net for about 5-6 mins to see if they're recieving massive packet loss at some point in time? That would at least t... Read more

Answer:"Destination net unreachable." Occuring every 5 mins

Because no one's replied to this problem yet, consider this reply a bump.

14 more replies
Relevance 64.37%

Hi all fellows,

I am using intranet, and my connection (internet) works fine , but suddenly it does not browse ?
when i try to ping , message appear,
Destination host unreachable ?

please guide me where is problem ?
what should i do ?
Ping Message and IP Detail also available attached.

Desperately waiting.
 

Answer:Destination Host Problem,

10 more replies
Relevance 59.04%

Hi,

Cannot do an "add printer" on Vista wireless pc to XP wireless pc which is wired to printer. Get "Host Unreachable" when pinging from Vista wireless pc to XP wireles pc. Can ping ok from XP wireless pc to Vista wireless pc.

Both PCs are wireless
Printer is connected XP pc
Ping XP to Vista pc - OK
Ping Vista to XP pc - "Host unreachable"

Tried to troubleshoot McAfee security. Please advise.

Thanks,
Joe
 

Answer:Ping shows "Host unreachable"

Disable all firewalls, that's the top suspect.
 

1 more replies
Relevance 59.04%

I'm trying to update Avast free AV (it's the first update), and it keeps saying "host unreachable"! Is this happening because of my slow internet (it is slow), or Avast servers are having technical problems? I looked it up on google and they said somewhere that Avast's servers were hacked in the past which caused this problem! If this really happened once, how can they be trusted again?
 

Answer:Avast Free "host unreachable"?

try to do a clean installation, and see your firewall, logs. You could also do a clean install of the latest version, see : https://docs.google.com/document/d/1TCCX0R7AAF2WOxAMQ_kcun2nNnCPFAk2P4RBzFXSgds/edit?pli=1
I think that can be your slow...internet too.
according avast forum, some hacker threaten the avast blog (as always) and the user request stronger encryption ...
 

6 more replies
Relevance 54.53%

Let me start from the top a few weeks ago I started getting the following error when renaming a file on the desktop "The destination folder or path would be too long..." yadda yadda, I have searched every where and even tried solutions that fix other similar issues but not the same Issue, I should also mention the fact that I am able to rename folders using command prompt and able to rename files normally, but it doesn't like me renaming ANY folders anywhere on my system not even directly on the C;\ Drive, I shall also copy and paste my dxdiag so you can see my system info

------------------
System Information
------------------
Time of this report: 10/18/2014, 11:52:45
Machine name: D1-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: BIOSTAR Group
System Model: N61PB-M2S
BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
Processor: AMD Athlon(tm) II X4 630 Processor (4 CPUs), ~2.8GHz
Memory: 4096MB RAM
Available OS Memory: 4094MB RAM
Page File: 1992MB used, 6194MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Display Tab 2: No problems found.
Sound Tab 1: No problems ... Read more

More replies
Relevance 42.64%
Question: NAS unreachable

Hi,

I have a NAS, accessible via 192.168.1.57:81 locally. The problem is : I can't see it under Windows. In Linux I can see it under network tab

I try to access it with \\192.168.1.57 in My Computer but doesn't work too

Any ideas ?

Thanks in advance

Answer:NAS unreachable

Hi nathan30

Did this just recently start?

Is this a new device or new install?

Is your computer connected wirelessly and is the network set to private? (not public).

Could you fill out system specs please.
Ken

28 more replies
Relevance 42.23%

can anyone help? i am trying to get to a website and keep getting this message Warning: mysql_connect(): Too many connections in /home/movies/public_html/store/includes/functions/database.php on line 19Unable to connect to database server! the site is dvd5movies .com

Answer:unreachable website

Warning: mysql_connect(): Too many connections in /home/movies/public_html/store/includes/functions/database.php on line 19Unable to connect to database server!The site must be down.

3 more replies
Relevance 42.23%

Everytime I open a new browser I also get another window pop up with adverts, also certain websites are unreachable, I have scanned with AVG and adware and they keep finding things but removing them, this has been done in safe mode as well.... Below is the log from hijackthis.. PLEASE HELP...

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 15:08:47, on 09/07/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0013)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\ibmpmsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
c:\Centenn.ial\Audit\CAgent32.exe
C:\Centenn.ial\Audit\xferwan.exe
C:\Program Files\Common Files\Portrait Displays\Shared\DTSRVC.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\NWDLS.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Analog Devices\SoundMAX\SMTray.exe
C:\PROGRA~1\ThinkPad\UTILIT~1\EZEJTRAY.EXE
C:\PROGRA~1\ThinkPad\PkgMgr\HOTKEY\TPHKMGR.exe
C:\Program Files\ThinkPad\Utilities\TpKmapMn.exe
C:\WINDOWS\AGRSMMSG.exe
C:\Progra... Read more

Answer:Ad Pop ups and certain sites unreachable - Please help!!!

Quote:




Please note that all instructions given are customised for this computer only, the tools used may cause damage if used on a computer with different infections.

If you think you have similar problems, please post a log in the HJT forum and wait for help.





Hello and welcome to the forums

My name is Katana and I will be helping you to remove any infection(s) that you may have.

Please observe these rules while we work:
1. If you don't know, stop and ask! Don't keep going on.
2. Please reply to this thread. Do not start a new topic.
3. Please continue to respond until I give you the "All Clear"
(Just because you can't see a problem doesn't mean it isn't there)

If you can do those three things, everything should go smoothly :D

Please Note, your security programs may give warnings for some of the tools I will ask you to use.
Be assured, any links I give are safe

----------------------------------------------------------------------------------------

I apologize for the delay in responding, but as you can probably see the forums are quite busy.
Unfortunately there are far more people needing help than there are helpers.

If you still require help please post a fresh HJT log

Installed Programs

Please could you give me a list of the programs that are installed.Start HijackThis
Click on the Misc Tools button
Click on the Open Uninstall Manager button.
You will see a list with the programs installed in your computer.
Cl... Read more

1 more replies
Relevance 42.23%

We started experiencing an issue with some customers unable to browse out to the internet.  Manually setting their proxy server to the proxy.server.com address works, but not when we use the http:\\proxy.pac. In the auto configuration script area
 on a working machine entering the http:\\proxy.pac in the address bar prompts for you to download/open the pac.  On the non working machine it ALSO cant reach the destination.  If *I* log on to the machine it works as intended.  We are
using preferences to push these settings and over 22,000 machines are working correctly.  But recently a number of people have started to experience this issue, and we are perplexed.  thoughts?

More replies
Relevance 42.23%

Problem: cannot access godaddy.com. All 4 computers on my home network cannot access godaddy.com. I do not get porn I just time out.

What I've done so far:
numerous anti-spyware programs have been run including spybotS&D and HijackThis (both before I found your forums), AdwareSE.
called both godaddy.com and verizon.net (my provider) with no luck, both say everything is fine on their end.

I have followed the FAQ with two problems:

-I mistakenly exited out of Counterspy without the log.
-Bitdefender crashed just as it was going to show the "detected problems" Explorer was the named culprit. I do remember mostly trojans found in email (trash box, Eudora Pro) that were deleted.

I do have the other 4 log files. I hope you can help, I have a website at godaddy.com that needs attending to.
 

Answer:Godaddy.com is unreachable

logs continued.
 

14 more replies
Relevance 42.23%

Hi,

I'm not sure what it might be but one day I noticed that about a dozen of websites I open regularly became unavailable. "The connection has timed out."

nslookup works OK and I get IP address resolved, I also tried tracert, it goes through 5-10 hops and then times out. I can still open some web sites but not all of them. I can open all web sites via online proxy so they are all up and running.

I have ADSL modem connected to my laptop, no routers, the modem doesn't have any static routing tables, so as far as I understand it, the list of hosts I see in tracert output depends on my ISP router.

The ISP is able to open all "problem" web sites on their side, but I can't get any help from them as they say that since tracert goes beyond their network it's not their problem and it's my computer actually blocking some of web sites.

I'm not aware of any software on my laptop which could possibly do that as well as I don't have any routing/proxy programs installed, so it seems that it might be a virus or some malicious software.

So what do I do? Try to find a virus or can it be a system issue?

Answer:some web sites became unreachable

Hi I'm new to this site but I'd like to help you.

Try downloading a alternate browser (I reccomend Google Chrome). This will make sure the problem isn't in your browser at least. Also can you ping any of those sites you can't get to?

2 more replies
Relevance 42.23%

Since the automatic upgrade was pushed to our PC's we can't reach www.msn.com. We can reach all other web sites.
Is there a workaround, I tried to restore to a date last week, but it didn't fix the problem.

More replies
Relevance 42.23%

i have bought a second hand laptop microstar medion 2020,i am trying to connect to my existing router thompson 576,i have a belkin pci card and all seems ok,until i try to connect to aol but the followin error comes updns server unavailable24-01-08-033,it is searching for my ip address?? can any one help me i am so near yet so far from connection.i know there is a lot of computer literate people out there can anyone HELP

Answer:dns server unreachable (aol)

what operating system are you using?

2 more replies
Relevance 42.23%
Question: Server unreachable

I cannot get online whenever I try I get the following message in a software Update box. The server is unreachable. Retry the request. When I access network connections, the broadband connection symbol has a x over it, and there is this message. This connection is not available because there is a problem with your modem is network adapter. Can anyone offer any solution please
 

Answer:Server unreachable

Try to update the driver
 

4 more replies
Relevance 41.41%

I also just noticed that the Action Security Center keeps telling me I have no antivirus or firewall active when I do....i hope i do.... :-(
 
DDS
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.16521
Run by Verner at 10:37:23 on 2014-04-02
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.1788.562 [GMT -5:00]
.
AV: McAfee Anti-Virus and Anti-Spyware *Disabled/Updated* {ADA629C7-7F48-5689-624A-3B76997E0892}
SP: McAfee Anti-Virus and Anti-Spyware *Disabled/Updated* {16C7C823-5972-5907-58FA-0004E2F9422F}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Spybot - Search and Destroy *Enabled/Updated* {9BC38DF1-3CCA-732D-A930-C1CA5F20A4B0}
FW: McAfee Firewall *Disabled* {959DA8E2-3527-57D1-4915-924367AD4FE9}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\SUPERAntiSpyware\SASCORE64.EXE
C:\Windows\system32\svchost.exe -k LocalServiceAndNoImpersonation
C:\Windows\SysWO... Read more

Answer:Unreachable dll's !! Cant remove them! (dds logs)

sorry...my pc is really dragging, didnt mean to double post....you can delete the 2nd one, i couldnt find a way to....

27 more replies
Relevance 41.41%

I've been trying to connect a newly aquired machine to my network with no luck what-so-ever. Initially I installed Windows XP professional with SP2 onto the machine only to be hit with the infamous "Limited or no connectivity" issue. Upon researching this error, I came across various solutions including the Microsoft SP2 Patch KB884020 with no luck. I still cannot get this machine to connect to the network. Everything I've tried is listed below.


Replaced the Hub twice
Tried with no Service packs, and with 1 seperately, and service packs 1 and 2
I've tried the winsock XP fix after reading it may be a corrupt IP table
I've run a registry fix i found on some forums (i have a feeling thats the same as the winsock XP fix though)
I've flushed out my DNS
I've tried 3 different network adapters, an nForce Motherboard mounted one. a Realtek one, and a Sitecom one
Manually assigned an IP address in the range which DHCP would assign

All of the above has failed. It is only this machine which fails. I've got numerous other machines on my network which are all recieving dynamic IPs from DHCP perfectly every time yet this PC hasn't recieved an IP once.

I read that if you can ping the computer's local IP, and ping its loopback address 127.0.0.1 successfully, it's not a corrupt IP table, but bad network drivers. However having tried 3 different network adapters with CD drivers from purchase, and drivers obtained on the inter... Read more

Answer:Unreachable network/No assigning of IPs

Replace the network cable?

Instead of trying everything possible you should approach this step by step. Use a static IP when testing at all times.

Do you get an ethernet link? (LEDs)
Do ARP requests succeed?
Pings?
Big pings?
What about duplex and speed settings?
 

3 more replies
Relevance 41.41%

Hello,

I have installed 4 AP through a switch to my NAT connection for internet.
The AP are Linksys WAP54G set on static IP no security settings.
Now my problem is that the laptops are not getting correct IP
but if i set it manually everything works fine.
Can someone tell me why i'm not getting an IP from DHCP.
 

Answer:Solved: DHCP unreachable

6 more replies
Relevance 41.41%

My friend took his computer to Best Buy who ran the restore on it with his main files on a second drive. The drive is now ganked, but I'm working to recover the files if possible.

In Disk Management (XP Pro), I can see that there's a 37GB volume with 20Gb free (looks like his missing files). There's a second volume on the disk that's only 47 MB and it's Active (so I can access it, but there's nothing to speak of there).

The point is that if I click on the 37Gb volume, I can't seem to do anything with it. The only menu option available when I right click it is "Help". If I click the disk itself, I have the option to convert to a dynamic disk, but I don't want to do that without knowing what will happen to the data on there.

When I dig through the properties, I can see data on the 47MB disk, but not the 37 GB. Does anyone know what to do with this!!!?
 

Answer:Unreachable Volume on Disk, What to do?

Oh, and the 37 GB says this:

37.22 GB NTFS
Healthy (EISA Configuration)
 

2 more replies
Relevance 41.41%

Need some help with this.. I have made absoultely NO network changes anytime recently but I can no longer connect to eMule.. Me and my GF are both on a wireless Network and has gbeen working fine.. Hers can connect to servers and to KAD, but mine will say its connected to a server but will neve rupload/download, and it says the port is unreachable.. I configged mine to be the same as hers and its still not working.. I cannot connect to KAD at all.. Can one of the networking specialists help me out..
 

Answer:eMules - Port Unreachable

Did yours work at one time? You say you've changed nothing? Maybe your isp has started blocking the port that your runnin emule on. Try changing the port to something else and configuring your network accordingly.
 

5 more replies
Relevance 41.41%

When I try to change my power options on my laptop I get an error message:
*An exception occurred while trying to run "C:\WINDOWS\system32\shell.dll, Control_RunDLL "C:\WINDOWS\system32\powercfg.cpl", Power Options"

My HiJackThis log is:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:47:52 PM, on 10/22/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\inetsrv\inetinfo.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\PnkBstrA.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\System32\snmp.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Sony\VAIO Event Service\VESMgr.exe
C:\Program Files\Common Files\Sony Shared\VAIO Entertainment Platform\VCSW\VCSW.exe
C:\Program Files\Common Files\Sony Shared\VAIO Entertainment Platform\VzCdb\VzCdbSvc.exe
C:\Program Files\Common Files\Sony Shared\VAIO Entertainment P... Read more

Answer:power options unreachable

Bump!
 

1 more replies
Relevance 41.41%

All of a sudden can't connect via Modem to the Internet. Not on Broadband but seem to be getting BB related error message: DNS server unreachable or unavailable >(24-01-08-033)" Anyone got a fix for this? Nellie!

Answer:DNS server unreachable or unavailable

Try click here

5 more replies
Relevance 41.41%

I can get to any website I try except Windows update.

I have moved the HDD to another PC and run MS Security Essentials, BitDefender & F-Secure scans. Then back to its own case where I ran Anti-Malware & SuperAntiSpyware. HijackThis also ran but still no Windows Update.

I have tried running IE in Safe mode - same problem. I did a repair install of XP - problem persists. I ran a batch file to delete the update database and reregister DLLs. Reinstalled IE 8. Still unable to reach Windows update in IE or FireFox. WinsockXPfix didn't help and an nslookup of windowsupdate.microsoft.com reveals

DNS request timed out.
timeout was 2 seconds.
*** Can't find server name for address 192.168.0.1: Timed out
*** Default servers are not available

All other websites on this PC come up fine, as does Windowsupdate on another PC on the same LAN. My Hosts. file contains just
127.0.0.1 localhost

Help.
 

More replies
Relevance 41.41%

Hi,

I am using an old laptop as a server for Plex and Subsonic, I login to it via RDP. Often the plex server becomes unreachable. Also at times I can't login via RDP for a few minutes with an error that the host is unreachable, this issue sorts itself after a few minutes and I can then log in again.

I'm wondering could this be due to hard disk spin down as all other power setting are set to stay awake.

This is on a Windows 7 setup, thanks.

Answer:Laptop Server Becomes Unreachable

Apparently this is not due to hard disk spin down as I have set it to never spin down and still experiencing problems.

Any one with any ideas on why I may be having these issues please let me know your thoughts.

1 more replies
Relevance 41.41%

I also just noticed that the Action Security Center keeps telling me I have no antivirus or firewall active when I do....i hope i do.... :-(
 
DDS
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.16521
Run by Verner at 10:37:23 on 2014-04-02
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.1788.562 [GMT -5:00]
.
AV: McAfee Anti-Virus and Anti-Spyware *Disabled/Updated* {ADA629C7-7F48-5689-624A-3B76997E0892}
SP: McAfee Anti-Virus and Anti-Spyware *Disabled/Updated* {16C7C823-5972-5907-58FA-0004E2F9422F}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Spybot - Search and Destroy *Enabled/Updated* {9BC38DF1-3CCA-732D-A930-C1CA5F20A4B0}
FW: McAfee Firewall *Disabled* {959DA8E2-3527-57D1-4915-924367AD4FE9}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\SUPERAntiSpyware\SASCORE64.EXE
C:\Windows\system32\svchost.exe -k LocalServiceAndNoImpersonation
C:\Windows\SysWO... Read more

Answer:Unreachable dll's !! Cant remove them! (dds logs)

Good evening.
 

Unreachable dll's !! Cant remove them!

 
What dlls and why do you want to remove them?
 
 

Action Security Center keeps telling me I have no antivirus or firewall active when I do....i hope i do.... :-(

 
DDS sees McAfee, so so far so good, but it reports it as Disabled so you might like to check if it is in fact active.

2 more replies
Relevance 41.41%

Hi all, new guy here with weird problem. I can not access www.crutchfield.com website. Everytime I try I get timeout (this applies to all machines on my network). However when I bypass the router and hook up directly to the modem I can get the website. Here's what I did so far:

My Internet connection is working fine (called Comcast and it was reset from their side).
I called Crutchfield and they confirmed their website is up (Comcast guy accessed it too).
I reset my modem and router.
I reset the router to factory defaults.
I reinstalled the router firmware.
I doublechecked that access control is disabled on the router, and no entries in web filter

I am stumped, can somebody help? Thanks.

I am running:
Toshiba - DOCSIS 2.0 Cable Modem - PCX2600
D-Link DGL-4300 router
Windows 7 RC x64
All connections Cat6 cable
 

Answer:Crutchfield.com website unreachable

12 more replies
Relevance 41.41%

Trying to link new Laptop to USB AOL Broadband Cable Modem, Error message DNS Server unavailable etc, AOL cofirmed modem working have disabled Norton Anti Virus & Firewall but still no Joy, any ideas. Still waiting on response from Dell Technical Support.

Answer:DNS Server Unreachable or unavailable

Have a look in Internet Options/Connections/LAN Settings and make sure "Automatically detect settings" has a tick.

3 more replies
Relevance 41.41%

Hi......

I have no clue what the error message 'unreachable statement' is supposed to mean, but i keep getting it and cannot get rid of it without deleting these 2 statements. The error is given for the red line...
Code:


...
findtarg(0);
...

protected void findtarg(int x)
{
int i;
int j;
tpx = 0;
tpy = 0;
for(i=1;1<256;i++)
{
for(j=1;j<256;j++)
{
if(getNk(idxy[i][j]) == targ)
{
tpx = i;
tpy = j;
break;
}
}
}

[B][COLOR="Red"]if(x == 0 && tpx > 0)[/COLOR][/B]
{
tpv = true;
mM = true;
mvl = true;
sendtp();
mM = false;
setWaitMode(null);
gst = 3;
SendCom('k');
}else
if(x > 0 && tpx > 0)
{
}
}
Any ideas?
 

Answer:Solved: Unreachable statement?

for(i=1;1<256;i++)

should be

for(i=1;i<256;i++)
 

3 more replies
Relevance 41.41%

Please can I get some help on in this been on it for a few days, and I cannot just seem to find how to fix it. Thanks all.
class Calculator2 {

double salary = 51000;
double base = 120000;
double commission = .13;

public double calculateTotalComission(double annualSales) {
return 123;

public double calculateTotalCompensation(double annualSales) { .....<<<< Illegal start of expression, unreach statement, and no return statement.
double totalPay = salary + (annualSales * commission);
return totalPay;
if(annualSales> 120000) { ...... <<<<Unreachable Statement
commission = 0.13 * 1.25;
System.out.println("Great job on exceeding your sales goal and acquiring the sales incentive!");
} else if (annualSales >= 96000) {
commission = 0.13;
System.out.println("You did not meet your sales goal but will acquire the sales incentive!");
} else if (annualSales < 96000) {
System.out.println("You did not acquire your sales incentive or meet your sales goal!");
}
}
}
 

Answer:Two (Unreachable Statement Errors) Please

Oh and this is Java. Sorry
 

2 more replies
Relevance 41.41%

Hi, I'm having a bit of trouble since last week. I have sweethosting.com hosting my web site and my laptop can't seem to connect to the web site anymore. Everytime I try, I get an error msg: Gateway time out--- Server Unreachable.. sometimes when I repair the wireless connection I can get access, but sometimes I can't.

I've tried scanning with with Nortons antivirus and scanned with spybot and also with Adware. I'm lost in the dark right now. My Desk top computer can access the web site though.

Can someone help me please.
 

Answer:Error msg: server unreachable

This is what I got when I just tried that site;

"This page is used to test the proper operation of the Apache HTTP server after it has been installed. If you can read this page, it means that the Apache HTTP server installed at this site is working properly.
If you are a member of the general public:

The fact that you are seeing this page indicates that the website you just visited is either experiencing problems, or is undergoing routine maintenance."

Checking the URL with a server identification tool produced the information that it is online, but returns a "HTTP 1.0 403 Forbidden", which seems to confirm the information above.

The IP address for that domain is 69.42.129.18. Sometimes, using the IP address instead of the URL works better, although I don't expect it will make much difference in this particular case.
 

3 more replies
Relevance 41.41%

Please can someone help me!I using edimax router to connect to aol, but keep on getting the DNS server unreachable or unavailable (24-01-08-033) error message. until recently it was working perfectly, then this error, i reloaded the software and now when i go to the sign on screen i have to use existing member as username,but it still doess not let me sign on!!My laptop which is connected wirelessly is able to connect nearly always via aol using my normal sign on name.please please can someone help me!!!

Answer:DNS server unreachable or unavailable 24-01-08-033

Check all your IP settings and acount details.If that doesn't work try turning off the router for a few minutes.

1 more replies
Relevance 41%

What does "Unreachable Read Error" means in Nero Express, damn annoying when 95% complete and it stops, thanks EOS.

More replies
Relevance 41%

how should i do it ?
i have level one router if its matter .

(this is for utorrent, recently im not able to upload properly )

Answer:Port is unreachable even when the Firewall is off . need to open it

Check that the port is forwarded to your local IP on the router web setup. You need your PC to have static local IP and the firewall needs to allow incoming connection on that port. uTorrent must be configured to use a fixed port (any number will do).

9 more replies
Relevance 41%

Hello,

I recently upgraded my computer to Windws XP 64, and my "my documents" folder on my previous setup is no unavailabe. I have alot of data that i would like to keep, is there anyway that I can retrieve this data.

Once I click on the folder in the Documents and Settings folder an error window appears with 'Access denied'.

I would very much appreaciate it if someone could recommend some software to retrieve my data, or suggest omeway of bypassing this restriction.

Many thanks in advance

Djdilly!

Answer:Unreachable Folder After A Windows Reinstallation.

Is it no longer available because it is lock or because it appears to be missing?

3 more replies
Relevance 41%

ive configured my pc to aol broadband, ive connected laptop to router with erthenat cable as "stated in manual", the icon in bottom right of screen says siganl strength excellent , wireless connected, but as soon as i unplug the erthenet cable the internet goes off please helpmy router is thomson speedtouch 576

More replies
Relevance 41%

This is driving me nuts! I have no problems at all with connecting via the WWW and Firefox/IE. However, any attempt to use FTP results in a time-out. The FTP client site said to try pinging but I find that ping times out as well. Could someone please help a clueless non-techie? I have no idea how to even begin troubleshooting this.

Thanks a bunch.
 

Answer:Solved: FTP & Ping Unreachable - But I CAN Browse WWW

8 more replies
Relevance 41%

From a PC (called PC1 later on; running W10), I do not see other PCs or multimedia boxes connected on my local network.
Using \\192.xx.yy.zz doesn?t work.
From a W10 tablet PC (called PCt later on), I see other connected devices: Dune HD and PC1. From PCt I can even navigate into PC1 directories.

In PC1 Network and Sharing Center, I cannot enable file sharing.
When clicking on the button to activate it and then saving the changes, I notice, when reopening the parameters window, that it hasn?t been changed. It remains disabled.

The "computer browser" Service will not start because of dependencies (1068 error).
The "workstation" Service will not start because of dependencies (1068 error). This service is required to "computer browser"

Thanks in advance for your help.

Answer:Devices on my local network unreachable

Have you set up a Home Group? In my experience that's the easiest way to get proper sharing setup.

0 more replies
Relevance 41%

I have had a Power Supply failure and it caused problems with computer.

I restored a prior image to the Operating system.

Decided to back up a lot of files to USB 2 Portable Drive. Worked well first day.

Next day XP did not start well so restarted with Safe Mode.

I think I may have unset the USB Drivers.

On connecting the USB Portable Dive the PX System would not connect to the drive.

Microsoft displayed a message " Unable to write $Msft.. (could not get all the name).

Since then I cannot access the USB Portable drive as windows says "The file or directory is corrupted and runreachable."

Can anyone recommend software to use to recover the USB Portable Drive?

:cry
 

Answer:USB Portable Drive - corrupted or unreachable

I take it this is an external hard drive? And does the USB port recognize other devices, like a flash drive?

I would disconnect and unplug the device, reboot everything. If this doesn't work, can you check the device with another computer?

Need to narrow down if it is the device or your machine.:wave:wave:wave
 

3 more replies
Relevance 41%

Hi,

Since half a year I'm using a simple Sweex RPO001 router for my homenetwork to which 3 computers are connected. Untill last week I haven't encountered any major difficulties. Three days ago my daughter's computers couldn't detect a connection to the internet althought her MSN was normally working. The other computers were normally functioning. At first I simply tried to solve the problem by disconnecting and rebooting both my modem en router. In the past this proved sufficiently to solve similar problems. The result was that none of the computers were able to gain access to the internet. I logged into the router to check it's status and found out that the router was unable to reach the gateway. Repeatedly refreshing, resetting and reconfiguring the router with the wizard didn't have any effect. When I directly connect a computer with the modem it directly detects the LAN of my provider. I have surfed the internet to find a solution but till now I haven't been succesfull. I hope someone has a helpful suggestion
 

Answer:Unreachable gateway Sweex router

I already solved the problem myself. Probably in one way or the other the firmware got damaged because after replacing the firmware with a downloaded copy and resetting en reconfiguring the router the problem was gone.
 

1 more replies
Relevance 41%

From a PC (called PC1 later on; running W10), I do not see other PCs or multimedia boxes connected on my local network.
Using \\192.xx.yy.zz doesn?t work.
From a W10 tablet PC (called PCt later on), I see other connected devices: Dune HD and PC1. From PCt I can even navigate into PC1 directories.

In PC1 Network and Sharing Center, I cannot enable file sharing.
When clicking on the button to activate it and then saving the changes, I notice, when reopening the parameters window, that it hasn?t been changed. It remains disabled.

The "computer browser" Service will not start because of dependencies (1068 error).
The "workstation" Service will not start because of dependencies (1068 error). This service is required to "computer browser"

Thanks in advance for your help.

Answer:Devices on my local network unreachable

Have you set up a Home Group? In my experience that's the easiest way to get proper sharing setup.

3 more replies
Relevance 41%

I am having problems on my laptop using things like Cortana across user accounts. The wheel spins and spins when I click on Cortana. I think the problem stems from the fact edge and IE11 cannot load outlook.com or go into things like account settings. It's only this causing the issue, all other sites work apart from these critical MS sites. I've tried changing DNS settings to alternates like google but nothing works to fix this. Any advice would be greatly appreciated? On my other desktop PC I have no issues. All language settings and packs are correctly set as UK. Am at a total loss. I tried a restore point but that was no better. I've had this issue crop up intermittently ever since getting the laptop. Sometimes it works ok but after a while the issue will re-occur without rhyme or reason. I notice under family setitngs 'Can't connect to family settings, your user data may not be upto date' sometimes comes up too. It's as if the laptop is having trouble connecting to MS server some of the time

Answer:Outlook.com unreachable via edge and IE11

The machine seems to be having real problems signing into MS. For example if I launch films and TV I see lower left 'Can't sign in'. I think there is something amiss logging into the MS account causing all the issues. Store is slow and unable to update apps, always an error message after ages of acquiring license. I don't really want to have to try and create a new user acc given everything I have setup/installed

Is there a way of signing out of the MS account and signing back in because something is seriously screwed up

Cheers
Wayne

1 more replies
Relevance 41%

Dear all

Not sure if Networking is the right category for this, but here goes...

We have several Windows Server 2003 boxes in a remote hosting centre that we connect to via Remote Desktop Connection from our offices. At the end of each working day, it's usual practice simply to close the RDC window, and in the morning we can reconnect to the same session and quickly resume working. But on a regular basis, one of the boxes (let's call it W2) becomes unreachable by morning, as in, it's unpingable and to all intents and purposes no longer on the internet.

To resolve this we can use Terminal Services Manager on one of the other remote boxes (let's call it W3) to connect to the problem box and reset the session. But we can only do this from W3 - none of the other remote machines can see W2 at this point in time. When the session has been reset, W2 once again becomes reachable remotely.

The Event Log shows up various suggestions but none of them are conclusive. About a week ago I had this, with a Source of "TermDD", which I thought looked promising:

Event ID 50
Error
The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
But I've not had it since and the strage behaviour has continued.

I've also had messages with a Source of "W32Time" that go like this and suggest the moment at which the disconnect occurs:

The time provider NtpClient is currently receiving valid time data ... Read more

Answer:Remote Windows server becomes unreachable

Is bumping frowned upon around here? Apologies if so...
 

1 more replies
Relevance 41%

I am having problems on my laptop using things like Cortana across user accounts. The wheel spins and spins when I click on Cortana. I think the problem stems from the fact edge and IE11 cannot load outlook.com or go into things like account settings. It's only this causing the issue, all other sites work apart from these critical MS sites. I've tried changing DNS settings to alternates like google but nothing works to fix this. Any advice would be greatly appreciated? On my other desktop PC I have no issues. All language settings and packs are correctly set as UK. Am at a total loss. I tried a restore point but that was no better. I've had this issue crop up intermittently ever since getting the laptop. Sometimes it works ok but after a while the issue will re-occur without rhyme or reason. I notice under family setitngs 'Can't connect to family settings, your user data may not be upto date' sometimes comes up too. It's as if the laptop is having trouble connecting to MS server some of the time

Answer:Outlook.com unreachable via edge and IE11

The machine seems to be having real problems signing into MS. For example if I launch films and TV I see lower left 'Can't sign in'. I think there is something amiss logging into the MS account causing all the issues. Store is slow and unable to update apps, always an error message after ages of acquiring license. I don't really want to have to try and create a new user acc given everything I have setup/installed

Is there a way of signing out of the MS account and signing back in because something is seriously screwed up

Cheers
Wayne

2 more replies
Relevance 41%

Is there a way of monitoring this queue?

I have some emails that are showing in the tracking viewer of having the wrong email address and therefore failed. I've read up that there is an 'unreachable queue' but I can't see where it is to view it and whether I can move or force the items to deliver that are in there.

Can anyone advise please?
 

More replies
Relevance 41%

Hi,

I was trying to recover some lost files with recovery software, I came across something unpleasant - my partitions contain 'Found' folder that contains 'Found.NNNN' N for numbers, folders that contain files previously deleted with their filenames also remaining. I want these files cleared, the thing is, unlike $RECYCLE.BIN that can be accessed if you unhide system folders and such, these folders do not exist and yet recovery software finds them.

Can you tell me what application can erase these folders and files so that they do not appear under the recovery software? Eraser does not detect the folder as existent. It is something like ROOT\Folder\ but I don't know which erasing program can find and delete the whole folder.

Answer:Need to delete content in unreachable folder

These things are usually made by CHKDSK.

If you have a lot of them, I'd suspect a failing hard drive.

11 more replies
Relevance 40.59%

Hi

I've been looking all over the internet to try and resolve this, but I couldn't find a solution... here goes:

I've been unsuccessful in trying to set up my Verizon DSL connection. According to Verizon tech support, the phone line is fine and my problem in connecting lies at home.

The details:

-I haven't been able to run account setup for my DSL service because I'm getting a problem in connecting

-I'm running Win2k

-I'm connected to the DSL Modem with a Belkin NIC

-The connection shows that it's active, BUT it only sends packets, doesn't receive them.

-When I ran ipconfig, my ip was in the 169.254.xxx.xxx range, and Autoconfiguration Enabled read Yes

-When I went to release my IP, I got a message that said
"All adapters bound to DHCP do not havee DHCP addresses. The addresses were automatically configured and can not be released."

-From the Microsoft web site, I followed instructions to disable APIPA found here ->microsoft support link

-Now ipconfig reads my ip as all zeros, and I get an error when I try to run the command /renew that says the DHCP server is unreachable

Help?
Thanks in advance

Tim
 

Answer:problems setting up DSL / DHCP server unreachable

9 more replies
Relevance 40.59%

Hello to all, I have a strange situation that i couldn't find in the other topics. Sorry if i missed it out somewhere. We are in an office having 15 computers connected through a Linksys WRT54G/GS/GL. We have one computer which is the storage for all our work files. All the internal ip's are taken through DHCP. The router have a static IP and all the internet goes through it. Everything works really fine until a certain moment when some of the computers (not the storage one) is unable to connect to the storage computer. I noticed that this happens when a lot of packets has been sent/received on the storage pc. When repairing the network connection problem still exists. When disable->enable the connection the packets are back to 0 and then everything works fine again. Is the problem in the storage computer or in the router? The storage computer is a windows XP, SP3, P4 3GHZ, 1GB Ram . Does anyone know of a patch or something to fix this issue? Thanks in advance.
 

Answer:computer invisible/unreachable after certain amount of packets

It's not the router, it has no effect on internal LAN traffic. That sounds like something with your "storage computer". I have no idea what is going on there, but I'd be looking at applications running at startup first.

What kind of numbers for packet counts are you seeing when the problem occurs?
 

3 more replies
Relevance 40.59%

I have had a network for almost two years with no problems, and for some reason my laptop has not been able to get online for about a week. It did this once before last year sometime, and I phoned Bellsouth; they said to shut down all the computers and then restart them, and that fixed the problem. It did not help this time.
I have tried everything I can think of.

My laptop is a Sony Viao with Windows 2000. I am using a Linksys router and wireless card with my Bellsouth Westell DSL modem. Someone else set up the network for me, but I don't have contact with that person any more to help me. I will probably phone Bellsouth again, but thought I'd try this, too. I tried Linksys' live chat but they kept getting disconnected.

When I type in ipconfig /release it says it's already released. When I type in ipconfig /renew it hangs a long time and then tells me that the DHCP server is unreachable.

I have three computers. One is this Dell I am currently typing on, with XP, and it is connected directly (wired) and works fine. Sometimes the connection goes out and I have to unplug the modem and plug it in again and then it works fine. That has always been true, though.

I have another Dell, an old one with Windows 98, and it is wireless. We don't use that one very much because it's slow, but it has a wireless connection and sometimes it can't get online, either. It has troubles but sometimes it works, sometimes it doesn't. That's been for ab... Read more

Answer:DHCP Server unreachable/wireless connection out

6 more replies
Relevance 40.59%

I turned out computer tonight regulary and he made bunch of automatic updates... later this day when i tried to star windows xp, he restarts the comp at the begining of his loading screen, nothing works (no last confing, no safe mode, not normaly). Im trying to do in-place recovery. Any clues? Im fearing when Windows update himself again, if he chrases again....

Thanks for any hint
 

Answer:Solved: windows unreachable after tonights update

Safe mode system restore. No safe mode? Then command line system restore. No command line SR? Then make a UBCD4Win CD with a XP install disc, boot to it and use the system restore utility on the CD.
 

3 more replies
Relevance 40.59%

Hi,
When I try to go to gmail.com on my desktop PC, it gives me a message that the page is unavailable.
It happens in Chrome, Firefox and IE.
I can go to gmail.com just fine on all other devices, like my phone, laptop and other computers, so I assume my desktop PC is to blame.
I disabled my Bitdefender Security's antivirus, firewall and its other tools but to no avail.
I used Ccleaner and other tools to clean history, cookies, traces etc. and that didn't help either.
I scanned the computer with Bitdefender and Malbytes, and they found no viruses or other harmful stuff.
I would really appreciate your assistance.
 

Answer:Solved: Gmail.com unreachable/unavailable all on browsers

15 more replies
Relevance 40.59%

Hello,
I've recently realised that I am unable to access a few websites, including Microsoft and most anti-virus sites such as Norton, Microtrend, Kaspersky etc.
However, I believe this issue has been prevalent for sometime and have no knowledge of what may have caused it.
I receive the error message 'Server not found' while using Firefox, and have confirmed the same problem with IE.
I'm aware of lingering viruses on my system such as wc2.virut but I am not requesting help with this, merely mentioning for additional information.

Here is my HiJackThis log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:25:55 PM, on 14/03/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.17023)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\Ink\KeyboardSurrogate.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\SYSTEM32\WISPTIS.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\System32\tabbtnu.exe
C:&#... Read more

Answer:Microsoft & Anti-Virus Websites Unreachable

Hello and welcome to the forums!My secret agent name on the forums is SweetTech (you can call me ST for short), it's a pleasure to meet you. I am very sorry for the delay in responding, but as you can see we are at the moment being flooded with logs which, when paired with the never-ending shortage of helpers, resulted in the delayed responding to your thread.I would be glad to take a look at your log and help you with solving any malware problems.If you have since resolved the issues you were originally experiencing, or have received help elsewhere, please inform me so that this topic can be closed. If you have not, please adhere to the guidelines below and then follow instructions as outlined further below:Logs from malware removal programs (OTL is one of them) can take some time to analyze. I need you to be patient while I analyze any logs you post. Please remember, I am a volunteer, and I do have a life outside of these forums.Please make sure to carefully read any instruction that I give you. Attention to detail is important! Since I cannot see or directly interact with your computer I am dependent on you to "be my eyes" and provide as much information as you can regarding the current state of your computer.If you're not sure, or if something unexpected happens, do NOT continue! Stop and ask!In Windows Vista and Windows 7, all tools need to be started by right clicking and selecting Run as Administrator!These instru... Read more

12 more replies
Relevance 40.59%

Not really a "problem", but I got to thinking...
Sure- I can get email notifications on my phone if a UPS has lost power, or if the server is under heavy loads and whatnot- but how do I tell when the server is unreachable- for ANY reason?
Say the UPS fails, the NIC fails, or any other reason. How can I be notified of it? The server is down, so obviously the email wouldn't originate from it.

That leaves me to wonder- how do you tell? I'm thinking there has got to be some sort of software somewhere that you install on another PC (maybe the PC and the Server) that talks with the server to make sure it is up. If it is unreachable- it issues an email notification.

That of course brings up a problem to my mind- what if that other PC (workstation or whatnot) is at fault? In other words- the server is fine but the client PC's NIC failed? I would get a false alert. In which case I would need a third PC in the mix to verify results of the other two...

Just brainstorming here- anyone have any ideas?
 

Answer:Email Notification if Server is Unreachable for Whatever Reason?

at my job we use hpov for the servers
 

15 more replies
Relevance 40.59%

Dear Lenovo Support, I posted my issue with my YOGA 500 a few days ago (see following), and I was suggested to contact the technical support. However, I could not reach anybody when I call these two numbers (Netherlands: 0204990153, 09006546540) this Friday afternoon.  Neither could I find the email address to send a request. I have read that the service is normal today during the holiday periods. I am traveling soon, and I would like to get this problem solved as soon as possible. Could you help? Thank you! ---Simple question but very troublesome. I cannot charge the laptop when the power is on, while the charging functions normally when the power is off. When the laptop is on, I could see the battery sign on next to the bettery indicator on the screen, but the amount just stays stagnant. Please help me with this issue. Thank you! ---

More replies
Relevance 40.59%

Im helping my father troubleshoot his computer. Regardless of the browser, He is unable to browse to google, or bing... browser says its unabel to connect to the server / server not found. He can get to yahoo.com homepage, but gives the same error when trying to perform a search. Every other website i tried works fine.. cleared cache etc etc... I then tried pinging the these sites from the command line and the requests timed out. Anyone have any experience with this? Also, he has an up to date version of Trend Micro Internet Security with latest def. files.

Below are the specs for his PC:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5270 @ 1.40GHz, x86 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2045 Mb
Graphics Card: NVIDIA GeForce 8400M GS, 256 Mb
Hard Drives: C: Total - 235837 MB, Free - 203546 MB;
Motherboard: Dell Inc., 0HX767
Antivirus: Trend Micro Titanium Internet Security, Updated: Yes, On-Demand Scanner: Enabled
Thanks is advance
 

Answer:Google, Bing, Yahoo Websites unreachable!!

follow advice here and post the logs those programs make
 

1 more replies
Relevance 40.59%

So my computer can't connect to websites, says they're Unreachable. This is true for nearly every site I try. I did a tracert for en.wikipedia.org which gave me:
1 * * * Request timed out.
2 * * * Request timed out.
...
11 * * * Request timed out.
12 42 ms 42 ms 46 ms text-lb.eqiad.Wikimedia.org [208.80.154.224]

The Internet isn't down though, I am still capable of accessing a few Google sites. Google Search and YouTube are both working fine, and I can still watch YouTube videos, but every non-Google site is Unreachable.

Please help?
 

Answer:Site Unreachable, tracert times out immediately.

lets see an ipconfig and do a tcp/ip reset

------------------------------------------------------------------------
ipconfig /all

We would like to see the results from an ipconfig /all - Please post back the results in a reply here.

If you cannot access the internet with this PC
You will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
If you do not have another PC
Do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries​
For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.
Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)​
For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​
In the command prompt window that opens, type the following command:

Note that there is a space before... Read more

1 more replies
Relevance 40.59%

I'm just curious why this happens. I browse on a VPN from time to time, and I've noticed that when I switch it off and try to continue browsing certain sites, I can't. It's like the browser doesn't even attempt to load it and shows an "unable to connect" error page right away.
 

Answer:Changing IP while visiting site makes it unreachable?

It's probably because the socket it was using was closed.
 

1 more replies
Relevance 40.18%

hi --

i have an old faithful Epson Stylus Photo RX620 but it is jammed and I cannot get to the paper to pull it out between the rollers.

i don't how to get it open but someone does.

thanks

cormaczoso
 

More replies
Relevance 40.18%

Hi,

Have bought a new laptop, ASUS and have hooked up my HP 1050 Deskjet - Printer/Scanner. (Have had no issues with Printer/Scanner with previous laptop!)

The operating system is Windows 7 Home Premium 64 bit.
There is no problems with Printing, but when trying to scan I get a message that says Scanner communication cannot be established.

I have tried un installing and re installing. Have even gone through everything with HP Tech support to no avail, as when doing a test of sorts there seems to be an issue with the WIA?

Any Ideas?
Thanks.

Answer:HP 1050 Deskjet - Unable to Scan (Scanner Unreachable)

Are you scanning with the buttons on the unit or through the HP software?

Have you checked HP for latest software for your scanner?

Have you tried scanning through other software, e.g. The Gimp, or IrfanView, or your word processor software?

7 more replies
Relevance 40.18%

Hello sevenforums Every time i am trying to send some files from my laptop ,dell inspiron15r windows 7 64 bit ,via bluetooth to my mobile phone following error is occurring. Please help how to remove this error.
The error is:
"a socket operation was attempted to an unreachable network"

Answer:a socket operation was attempted to an unreachable network bluetooth

I am also having the same proplem
can any expert help how to resolve this

1 more replies
Relevance 40.18%

Today my memory stick was used by a co-worker to save some files from another computer. When it came back to me, it was obviously infected with some kind of virus.

I just ran McAfee Virus Scan on the memory stick and it did not find anything.

It is obvious that it missed it. Previously on the memory stick were a number of folders, and also some files not in folders on the top level. Those folders were all replaced using the same names as the folders with .exe files.

So if there was a folder before that was named "Photos", now instead there was a .EXE file with the name Photos.exe. I use Display Extensions, so it was immediately obvious to me the virus had replaced my folders with itself. All the file sizes of these .exe files were 230K. There were about 10 folders replaced this way.

Now in the past when a similar virus has infected my USB, all I needed to do was scan it with McAfee, which would kill the virus one file at a time, and then after that go to Explore, Tools, Folder Options, View, choose Show Hidden Files and Folders (the virus had selected Do Not Show Hidden Files and Folders). All the old folders, which had been hidden, would then reappear.

This time when I do that, the lost folders don't reappear.

My first reaction was that they had been deleted by the virus.

However, when I go to Explorer and right click on my USB memory stick drive (it shows up as drive E there), it shows 170mb used, 330 free on the memory stick. I only have about 3m... Read more

Answer:Usb Memory Stick Infection -- Folders Hidden(?) And Unreachable

Download Flash_Disinfector.exe by sUBs and save it to your desktop.Double-click Flash_Disinfector.exe to run it and follow any prompts that may appear.Wait until it has finished scanning and then exit the program.The utility may ask you to insert your flash drive and/or other removable drives. Please do so and allow the utility to clean up those drives as well.Reboot your computer when done.You can also download "ClamWin Portable", install it on your USB Flash Drive, update its definition files and perform a scan.

5 more replies
Relevance 39.77%

IBM Connect Direct application used for Host to Host connectivity has been picked up as a Trojan Virus by some Microsoft Security Products including Defender, System Centre Endpoint Protection, System Centre Endpoint
Protection 2012 and Security Essentials.

The result is that Connect Direct is deleted by the security software.
Question: What will be the implication of excluding this from the security policy?

More replies
Relevance 39.77%

Before I start I'm sorry if this is in the wrong thread, i just joined and I don't want to waste time that could be spent trying to fix my computer.

Anyways, I've been recently trying to dual boot windows 7 and windows 8 release preview and i tried several methods from vhd to bootable usb, it was going pretty well until i decided bootable usb would be easier and got rid of the vhd that wouldve had windows 8. Now i am unable to boot my computer after a message saying bootmgr is missing. I have a system recovery disc but when i put it in it comes up with an error :status 0xc00000e9 info an unexpected I/O error has occurred. I also have the usb with the bootable windows 8 installation but that fails to start with another error; status 0xc000000f info a required device isnt connected or cant be accessed. i am currently making a windows 7 boot cd to see if i cant get that to help fix my problem. i would do the same thing with windows 8 but the windows usb/dvd download tool says my windows 8 iso is an invalid iso so i was unable to use that but i got it through a more difficult tutorial. I will answer any and all questions that further explain this problem to the best of my knowledge. I know little about scripts commands etc, but i have been trying to learn so if something like this were to happen it would be easier, sadly i didnt get enough time to work.

Any help is appreciated

EDIT: i have managed to get the windows 7 boot cd to load, i am currently trying to repair the system... Read more

Answer:Windows 7 unable to start, system repair and f8 functions unreachable

If you don't have many programs on your computer, a clean install of Win 7 might be your best bet. Depending on which disk you have, try the related tutorial.
Clean Install Windows 7
Clean Install with a Upgrade Windows 7 Version
If you don't have a disk to do an install, let us know.

5 more replies