Computer Support Forum

STOP: c oooo 145 {application error. The application failed to initialize properly (0x 0000005).

Question: STOP: c oooo 145 {application error. The application failed to initialize properly (0x 0000005).

STOP: c oooo 145 {application error. The application failed to initialize properly (0x 0000005). Click OK to terminate application. The above message is what I receive, when I run "error check". It was advised from the Microsoft website that I ran ERROR CHECK, along with "disk cleanup" & "defrag" analysis, to see if the machine needs to be defragged.I went along with the advised procedures by Microsoft, because it was said that the computer would run faster. I've been doing the ones that worked, defrag analysis, disk clean up & CC Cleaner. Along with those maintenance tasks, I update all the definitions on the malware software. With the aforementioned error message problem with the lap top, I also have a problem with Adobe Reader (listed in another topic), that I can't uninstall it, without getting a 'Error 1402' message. Then the one last problem is the cursor jumping around at random times, when I am typing to either the forum or in a Word document. I mention these other issues because I am not sure they're not related. This is a DELL Inspiron 1520, Centrino (2007). I have another laptop, a 5150 Inspiron, with a P4 chip, and it absolutely has no issues. It hasn't even caught a virus. I don't use it as much now, but in the past I took it everywhere. It is heavy & the fan was on the bottom, so I built a stand out of PVC pipe & fittings. It kept the laptop off of the surface so it could get air circulation to cool, but just recently, I thought that the Mother Board gave out. I sent it in, & for $200, I got the machine back, running as good as ever.

Relevance 100%
Preferred Solution: STOP: c oooo 145 {application error. The application failed to initialize properly (0x 0000005).

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: STOP: c oooo 145 {application error. The application failed to initialize properly (0x 0000005).

What steps are you taking to run the check?

That error seems to indicate a hard drive problem, which is why it was suggested to run chkdsk /r.

Start/Run...type chkdsk /r and hit Enter. Type Y in new screen and hit Enter. Reboot the system. The command should execute, before booting into XP.

Louis

2 more replies
Relevance 109.33%

On start up I get this error and a blank screen in safe mode and normal.I can get it to boot up by ctrl+alt+del,task manager,file,new task run,explorer.exe enter but it won't let me do any thing

Answer:userinit.exe-application error application failed to initialize properly(0xc0000022).

Quote:





Originally Posted by donnythedondon


On start up I get this error and a blank screen in safe mode and normal.I can get it to boot up by ctrl+alt+del,task manager,file,new task run,explorer.exe enter but it won't let me do any thing




I try do a system restore does not work regular and cmd
Internet does not work eather
I'm new at this so any detailed help wold be great

19 more replies
Relevance 109.33%

Hi Guy'shere i have a sony Vaio laptop, and it is comming up with the following error everytime i log in...(extract from Eventvwr)Event Type: InformationEvent Source: Application PopupEvent Category: NoneEvent ID: 26Date: 26/11/2008Time: 12:20:26User: N/AComputer: CSZ3XWP110407Description:Application popup: Explorer.EXE - Application Error : The application failed to initialize properly (0xc0000142). Click on OK to terminate the application. I have run a virus scan, used Adaware, however i am continually recieving this upon logging in. then CAD -> taskmgr -> new task -> explorer. Once this starts the machine is then usable.this is machine wide, happens on any profile. System restore was not on (it is now), so unfortunatly no roll back option.all windows updates and service packs have been applied.Thanks in Advancehere are the Hijack this and RSIT logs...Logfile of random's system information tool 1.04 (written by random/random)Run by Administrator at 2008-11-26 13:27:48Microsoft Windows XP Professional Service Pack 3System drive C: has 22 GB (47%) free of 48 GBTotal RAM: 2046 MB (70% free)Logfile of Trend Micro HijackThis v2.0.2Scan saved at 13:27:50, on 26/11/2008Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16735)Boot mode: NormalRunning processes:C:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchos... Read more

Answer:Explorer.EXE - Application Error : The application failed to initialize properly (0xc0000142).

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a description of your problem, along with any steps you may have performed so far.Upon completing the steps below a staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results, click no to the Optional_ScanFollow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable ... Read more

2 more replies
Relevance 108.75%

This problem started around right after i upgraded my itunes after i proceded to restart the system as recommended and then i tried to go back on but got this message i cant get task manager to work it says its been disabled by an administrator even though i am the administrator same thing in safe mode please help i jus want my 910 songs back

More replies
Relevance 108.75%

My comp wont start this comes up and only the desktop background will appear
i cant start task manager because it says it has been disable by an administrator but i am the administrator
same thing happens in safe mode

Answer:Userinit.exe-application Error , The Application Failed To Initialize Properly (0x0000005). Click On Ok To Terminate The Applic...

OMG everyone reads but no one responds

13 more replies
Relevance 108.75%

Hi There

I have been given a friends computer to fix. The way he described it, it sounded like it was full of Malware etc, however I haven't been able to start it up as I get the following message appearing when I power it up.

userinit.exe - Application Error The Application failed to initialize properly (0xc0000005). Click ok...

This message appears twice, I then get the wallpaper of the computer up, but nothing else, no icons or task bar. I have tried a wee trip to safe mode but don't get anywhere from that either, just the same message.

Does anyone have any thoughts?

Cheers

Colin
 

Answer:userinit.exe - Application Error The Application failed to initialize properly

11 more replies
Relevance 108.75%

Okay, please forgive me as I have no idea where to post the issues that I am experiencing. Yes, I did check out previous posts that were similar in nature.

I was on my computer this morning. I shut down the computer and then this evening when I turn the computer on I get the following message:

Application Error The application failed to initialize properly. (0xc00000006). Click ok to terminate the application

I click okay I get a blank desktop - so I cannot run system restore. I have tried starting the computer in safe mode but I get the same message. I do not have any discs to re-install anything because when I bought my laptop I was told that all that stuff is built in. I have a compaq presario, windows xp. I am currently using my husbands laptop to try and figure out what to do. Can someone please help me?

Thank you,
Theresa
 

More replies
Relevance 107.59%

Hi All,

I recently purchased a new laptop and I have had this error occur almost since the start.

Basically, when I switch on my laptop, both bttray.exe and GrooveMonitor display the exact same error(bar the application name in the title) - I have also tried to install AVG Free which comes up with the same error when trying to start.

The error is:

BTTray.exe - Application Error
The application failed to initialize properly (0xc150004). Click OK to terminate the application.

I am running Microsoft? Windows Vista? Ultimate 6.0.6001.1.1252.44.1033.18.3066.1940

I haven't tried anything to correct this as I wouldn't know where to start.
Any help anyone can provide would be highly appreciated,

Thank you in advance,

Joe

More replies
Relevance 100.63%

Hi there, i am using windows XP home edition and cannot log in, when i try i get the error message-"Explorer.exe The application failed to initialize properly (0xc0000022) Click on OK to terminate the application) and then a blank desktop appears. Here is my HijackThis log, please help me! Thanks a lot.Logfile of HijackThis v1.99.1Scan saved at 8:50:30 PM, on 9/19/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\ctfmon.exeC:\unzipped\hijackthis\HijackThis.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.comR0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.dell.com/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.comR0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.dell.comR1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://www.dell.com/F2 - REG:system.ini: UserInit=C:\WINDOWS\SYSTEM32\Userinit.exe,cibbhbm.exeO3 - Toolbar: &Google - {2318C2B1-4965-11d4-9B18-009027A5CD4F} - c:\p... Read more

Answer:-"explorer.exe The Application Failed To Initialize Properly (0xc0000022) Click On Ok To Terminate The Application)

This is my hijackthis log when I start hijack this through cntrl alt delete when I am at the blank desktop after I get th error... the previous post was in safe mdoeLogfile of HijackThis v1.99.1Scan saved at 9:01:31 PM, on 9/19/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\wuauclt.exeC:\unzipped\hijackthis\HijackThis.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.comR0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.dell.com/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.comR0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.dell.comR1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://www.dell.com/F2 - REG:system.ini: UserInit=C:\WINDOWS\SYSTEM32\Userinit.exe,cibbhbm.exeO3 - Toolbar: &Google - ... Read more

2 more replies
Relevance 100.63%

I have seen several postings on this topic, but it seems that every one is a little different, so I am posting my dilemma. I am sorry if I'm posting in the wrong place.
As of about 10 days ago, several programs will not open. Instead, I get the error window that states "The application failed to initialize properly (0xc0000005). Click OK to terminate the application." As far as I can tell, this error message affects these programs: Ultraplayer, Windows Media Player, Sound Recorder, Logitech Setpoint, Quicktime Player, Real One Message Center, and Total Recorder.

My computer is a desktop, HP Pavilion a1020n. Windows XP Home Ed., SP 3. Windows updates are current. Run Avast antivirus software and usually have Windows Firewall turned on.

Here's what I've tried:
Tried to uninstall and reinstall several programs. Uninstall usually won't happen. Have tried new installs over the old, but it doesn't "take."
10 days ago - went back to a restore point. Did no good.
Have run Lavasoft Ad-Aware and Spybot Search & Destroy several times, including today (May 2). Today Ad-Aware found and removed a few items from the families of Cookies, Win32 Trojan Spy, and Win32 Tr\.\per Delf. Spybot found nothing today.
Have run CCleaner to clean up registry.
Ran Hijack This and saved the log. I can post it if it is needed.

I've considered reformatting the hard drive, but really don't want to resort to that.

I don't kno... Read more

Answer:Application failed to initialize properly (0xc0000005). click OK to terminate the application.

Worth a look, http://support.microsoft.com/kb/217134Seems to be a fairly common and varying problem, http://www.google.com/search?q=the+applica...art=10&sa=NLouis

6 more replies
Relevance 100.63%

Hello - I wrote an application in VB6 suppose 'APP_X'. which i am running every night using a service called 'WinService_Y' running as admin user. Now in APP_X, I am using net.exe to sync time
with server.



When the WinService_Y triggers the APP_X, it gives me the error saying:

"The application failed to initialize properly(0xc0000142). click ok to terminate the application"



Okay, title of the dialog box is Net.exe so i know this occured when APP_X is trying to execute Net.exe.







P.S: This does not occur if i directly run the APP_X without using the WinService_Y

APP_X is written in VB6 and WinService_Y is in C# .net framework 2.0

APP_X is just not time sync there are tons of other things



Sync time Code APP_X(sample):

---------------------------------------------------------------------------------

   sAppToRun = "net time " & "\\" & sBOServer & " /set /y"
    WriteLog "Trying to sync with admin account"
    Set objexec = objShell.Exec(sAppToRun)
    sOut = objexec.stdout.readall()
    If sOut = "" Then
       ShellAndWaitAsUser = CreateProcessAsUser(".", "Myuser", "MyPassword", Trim(sAppToRun))
       WriteLog "Timesync status on device"
       If ShellAndWaitAsUser Then
        &n... Read more

More replies
Relevance 100.63%

Sorry guys I'm new here and I don't know much about computers so I decided to post this question here in General Chat.Well this is the problem:the application failed to initialize properly (0xc0000005). Click on OK to terminate the application. (it pops up twice)I've researched this topic on Google and I have noticed a lot of other people have had the same problem but I think this is a special case.See, whenever I turn on my laptop on everything goes well and even gives me the option of selecting F2 to to configure things on the computer. But when I get to the main page where I'm supposed to log in this message pops up:the application failed to initialize properly (0xc0000005). Click on OK to terminate the application.So then I try to click Ctrl, Alt, and Del to open up the task menu but nothing happens. I noticed the keys are not unresponsive because when I click Caps Lock the little light flashes on.So please can somebody help me out with this huge problem, or is my laptop over and done with?EDIT: Moved to a more appropriate forumWe'll just assume XP-MG

Answer:the application failed to initialize properly (0xc0000005). Click on OK to terminate the application.

I would prefer to move this topic to the OS forum that it relates to. Would you please let us know?

10 more replies
Relevance 100.63%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 8:55:39 PM, on 3/16/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\ctfmon.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\TV Expert\ADTVScheduleAgent.exeC:\Program Files\Symantec AntiVirus\DefWatch.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOWS\System32\ups.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\Program Files\Symantec AntiVirus\Rtvscan.exeC:\WINDOWS\system32\wscntfy.exeC:\Program Files\TV Expert\ADTV.exeC:\Program Files\Mozilla Firefox\firefox.exeC:\Program Files\TrendMicro\HiJackThis\HiJackThis.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\NOTEPAD.EXEC:\Program Files\Microsoft Office\OFFICE11\EXCEL.EXEC:\WINDOWS\System32\svchost.exeC:\Program Files\WinRAR\WinRAR.exeC:\DOCUME~1\Karthik\LOCALS~1\Temp\Rar$EX00.797\HijackThis.exeR1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://securityresponse.symantec.com/avcenter/fix_homepage/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http:/... Read more

Answer:The application failed to initialize properly(0xc0000142).Click ok to terminate the application

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 99.76%

Computer is on for 24 hrs. +- and the keyboard & mouse become unresponsive. (before that 24 hrs. the machine runs great) If I'm able to open a program a typical message error is: "Notepad.exe - Application error - The application failed to initialize properly (0x000012d) Click OK to terminate the application" (my quotes). I am forced to restart the computer.
I was sent to this forum from the anti malware forum who (I think) originally did find some instances of malware, however since the varmint has been removed the symtom has returned and they sent me here. {Marti} They suggested I do a reinstall- it dosen't appear to be too difficult with the Dell reinstall disc.

Windows XP sp3 Home
1 Gb ram
250Gb external hard drive
111 Gb internal hard drive

Answer:Error: Application failed to initialize properly

Hi .

Well...have you read the Dell documentation for your system...which indicates how to install, the effects, etc.?

System model?

I don't believe that you will be able to do a repair install with a CD reflecting SP1...since your system reflects SP3. But Dell systems don't necessarily play by the rules of owners with MS Genuine XP CDs...which is why you need to consult your system documentation to see what your options are.

If you tell us the model, I will review the system documentation and state what I see as your options.

Louis

3 more replies
Relevance 98.6%

I am unable to start RapidShare Plus 4.0... once I click the icon I get the following error "The application failed to initialize properly (0xc000007b). Click on Ok to terminate the application". Then it terminates I'm using XP SP3 with .NET framework 3.5 SP1, 3.0 SP2 and 2.0 SP2 installed. It was working fine this morning. Thanks in advance
 

Answer:Error: The application failed to initialize properly (0xc000007b)

as this falls under the umbrella of p2p, I'm afraid we cannot assist here. This is also your second rules violation since you arrived here; I'm afraid that we do operate on the three strikes rule.

As I stated in the other thread, I do recommend you read the rules before posting any further.

thanks,

v
 

1 more replies
Relevance 98.6%

I have S.T.A.L.K.E.R. video game on my computer and when I play it, after about 15 minutes or less it crashes...sometimes it says tasgmgr.exe application error the application failed to initialize properly (0xc000012d)

when i kill the process running the game (XR_3DA.exe) it is ok.

Does anyone now how this can be fixed? shall i post a hijackthis! log?

thanks
 

More replies
Relevance 98.6%

so everytime to try to use media player classic i get this error

'application failed to initialize properly (0xc0000022). click ok to terminate the application'

i am fairly certain it is a permission issue, and i believe i know what caused it. while following the smitfraud fix i did step 3 (when i probably shouldn't have) which Restores Trusted and Restricted Zones.

i have tried to look up how to fix this myself, but they seem to pertain to vista and/or talk about things i don't know how to do, or i can't find. My account is also the admin account. could anyone help me solve this issue?
 

Answer:application failed to initialize properly (0xc0000022) Error

I would uninstall MPC and reinstall the latest version.
I usually download a copy of what I'm going to install before I uninstall the buggy program.
 

2 more replies
Relevance 98.6%

I am unable to start RapidShare Plus 4.0... once I click the icon I get the following error "The application failed to initialize properly (0xc000007b). Click on Ok to terminate the application".Then it terminatesI'm using XP SP3 with .NET framework 3.5 SP1, 3.0 SP2 and 2.0 SP2 installed.It was working fine this morning.Thanks in advance

Answer:Error: The application failed to initialize properly (0xc7b)

any new software installed lately? Or any updates on your software? How about hardware? Anything new added lately?

2 more replies
Relevance 98.6%

My 77 year old mother in law dropped off her old Compaq desk top computer and asked for help with a failure to boot up problem so I am trying to help with my limited knowledge.

Computer is an older Compaq Deskpro EN, Pent III 863 MHz, 384 mb RAM, with Win XP Pro version 2002 SP 2. She said the grandkids got on the computer during Christmas Holidays, surfed the net, and suddenly computer would not work or boot up. At start up the computer goes to the desk top screen but with no icons, then this application error code message pops up:

"userinit.exe application error, the application failed to initialize properly (0xc000012d). Click OK to terminate".

I can boot it up in safe mode as administrator or user but don't know where to go from there to determine the problem or fix. Any help would be appreciated.

Thanks, Dave
Central Florida, USA

More replies
Relevance 98.6%

Can any one please help to fix this error.

Answer:Error :- Application failed to initialize properly (0xc0000135)

Just a wee bit more info is needed:

1) What application is causing this error?

2) What OS are you using?

3) Did you recently install this application or some other application?

4) When is the error occuring? When logging into Windows? When you open a specific application?

2 more replies
Relevance 98.6%

I have workstations with the oracle client installed (some 9i, some 10g) accessing oracle 9i databases.

When starting a program to use them via sqlplus the following error pops up:

Code:
SQLLDE.EXE - Application Error
The application failed to initialize properly (0xc0000006). Click ok to terminate the application.
I don't quite understand, what could cause the application to crash in this way sometimes and other times it works fine. Is there a good way of debugging this? Perhaps using some sysinternals tools or something?

Has anybody seen this kind of behaviour in applications before? What did you do to solve it?
 

More replies
Relevance 97.44%

i keep getting this error message and the laptop just stalls from it.only solution is to pullthe power supply and boot up again. now i have googled this and found that omnipass conflicts so it wiped off.two days goes by and now its starting to stall and display this error message. 'running windows xp ser2and various other progsi have a up to date AV and nothing foundi also regularly run adaware and spybot. anyone and any clues or solutions please.  

Answer:the application failed to initialize properly(oxc0000142) error message

some kind gent on another forum looks like he has helped me sohere is the solution in case anyone else suffers the same problem  go to the ControlPanel>System>Hardware>DeviceManager button, find the "Universal Serial Bus controllers" section, and disable the "Allow the computer to turn off..." setting in the Power Management tab of each "USB Root Hub" item's properties.      

1 more replies
Relevance 96.57%

Hi there, I am new to the forum and really need help for my parents.

Their computer is playing up at the moment. First of all it has been crashing, by this i mean freezing completely.

I have came to look at their computer to see if i could help. However I can't, this is way beyond me.

The above error message is happening when trying to load Windows Defender. The main message in blue says "MSASCui.exe - Application Error" and below it says "The application failed to initialize properly (0xc000009c). Click on OK to terminate the application."

Obviously this is not allowing Windows Defender to load, however the computer itself is now playing up by crashing now and then. I am thinking registry possibly however after scanning and repairing what errors were there this still did not fix the problem. Please can anyone help?
 

Answer:Solved: Error Message: The application failed to initialize properly (0xc000009c).

10 more replies
Relevance 96.57%

Ok whoever can fix my comp is a total geek

Well yesterday i was normally doing stuff on my computer and accidentally uninstalled something i didn't think i needed (and I'm not sure if its causing the problem either) so it said to uninstall the program you had to restart your comp, which of i did of course. Then a error popped up saying explorer.exe the application failed to initialize properly error Oxc0000005 . I know explorer.exe is a process that shows everything like your icons and start menu and wallpaper etc. so i couldn't see any icons and had to use task manager to open FF and now I'm here typing this post.
So can any of you had this problem or can help? I would appreciate it so much

PS: the think i uninstalled was IE 8 from add/remove programs and Internet explorer from add/remove windows components

Answer:explorer.exe the application failed to initialize properly error code 0xc0000005

http://support.microsoft.com/kb/307852

9 more replies
Relevance 94.54%

Please i need help,if any qute guy please help me!
When ever i open windows a message appears saying
The application failed to initialize properly error code(0xocooooo5)
It also happens when i try to right click trying to open properties.
This is the hijack log file.
PLEASE HELP MEEEE!!!
thanks


Deckard's System Scanner v20071014.68
Run by Nicole Collett on 2008-08-08 10:43:27
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------



-- Last 5 Restore Point(s) --
85: 2008-08-08 14:34:20 UTC - RP1055 - Deckard's System Scanner Restore Point
84: 2008-08-07 16:33:46 UTC - RP1054 - RegCure Backup
83: 2008-08-07 11:50:18 UTC - RP1053 - System Checkpoint
82: 2008-08-04 21:22:28 UTC - RP1052 - Installed Java(TM) 6 Update 7
81: 2008-08-04 20:59:53 UTC - RP1051 - RegCure Backup


-- First Restore Point --
1: 2008-07-29 00:32:10 UTC - RP971 - Software Distribution Service 3.0


Backed up registry hives.
Performed disk cleanup.



-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-08-08 10:45:51
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16674)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS... Read more

Answer:Error message,application failed to initialize properly error(0xoc0000005)he

Hello and welcome to TSF.

Sorry for the delay in reply. If you still need assistance, please post a fresh log as it has been a while since you posted.

15 more replies
Relevance 93.67%

My original post was in the Window XP/Pro discussion. This is continuation from there as did not know if I needed to copy them over here........ This still happens when I start the machine: Services.exe - Application Error. The Application Failed To Initialize (0xc0000005)., Windows XP Professional SP2Then it will take its time loading....and if I try and install something it won't; it will shut itself off and restart..i think it has a mind of its on.... ok the following is what I have found today...this will all be hand type as the floppy drive does not work, the internet connection says it up in Task Monitor but to get online its not happening. Last night I attempted to run Spy-Bot Search and Destroy; it said I needed to load the definitions file....but I have no online access...so...does anyone know how to update with out being online?Here is what I started with today.Turn machine on. Still get Services.exe - Application Error.Decided to uninstall some of the useless program that are no longer needed. Here is list as follows and results:Add & Remove Programs:Uninstall Dell DJ Explorer The Installshield Engine (iKernel.exe) could not be launched. The RPC server is unavailable.Google Earth An Error (-5009:0x800706ba) has occurred while running setup. Please make sure you have finished any previous setup and closed other applications. If the error still occurs, please contact vendor: Google (http://www.ke... Read more

Answer:Services.exe - Application Error. The Application Failed To Initialize (0xc0000005)., Windows Xp Professional Sp2

Link to previous topic: http://www.bleepingcomputer.com/forums/t/135040/servicesexe-application-error-the-application-failed-to-initialize-0xc0000005/Orange Blossom

4 more replies
Relevance 93.09%

I get the topic title message each time I boot up.  The full message is "MSASCui.exe Application error. This application failed to initialize properly (Oxc0000034). Click on OK to terminate the app."  One other message also appears each boot-up, beginning with "msmsgs.exe App error" etc.  What do I do?  I've tried system restore, re-downloading programs that appear to be affected (CCleaner, for example).  Thanks in advance.
 

Answer:MSASCui.exe Application error (Oxc0000034) This application failed to initialize

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

1 more replies
Relevance 93.09%

I was brought a machine the other day from a friend who got it from a house she was cleaning...so of course there is no telling why they left it behind as it is souped up with all the fans, lights, and amd EP-8KHA motherboard with the counter on it...which when I first loaded it..it took forever the boot screens came up then the wonderful....Services.exe - Application Error. The application failed to initialize (0xc0000005). came up. I went through the prompts of ending it...then 20 mins or so later windows finely loaded but the start menu was gone....at first the whole desktop was just the blue screen but my patients in letting it load I finely had icons but still no start menu...I found that someone had removed nortan...so there is no anti-virus on it....well I tried to load AVG on a CD that I burned off my PC and load it...along with Spy-bot, ad-aware SE, and a few other programs to see if I could get some of the tried but true to repair any virus, malware and such off. Well to no avail did any of the programs load...so I had noticed that when I tried going into user accounts to see if this account had admin. privileges the user accounts never loaded. Doing some investigating I found on Microsoft that I could make another account with admin privileges and that it should load....NOPE....I got the account created but when I tried to log into it no windows just a blank screen...Ctrl.Alt.Delete. brings up the task manager on network I see that it says that the INTERNET is run... Read more

Answer:Services.exe - Application Error. The Application Failed To Initialize (0xc0000005).

Well...it seems to me (I may be misreading) but that system belonged to a unnamed 3d party, which had the operating license.

If I had found such system, the first thing I would have done is wipe it clean (because I don't like using someone else's data which they've decided to trash) and to give myself a good start at seeing if the system worked properly.

Then I would have done a clean install.

That's the only way that I know how to go from a series of unknowns...to a known good, working system.

Worst case scenario: The system is highly infected.

Best case scenario: The system has O/S or malware problems or a combination thereof.

Louis

5 more replies
Relevance 91.06%

Hi. I am having issues with my computer when I try to play some programs on it, such as Mavis Beacon Teaches Typing 20 Platinum, as well as many of my son's computer games, such as Disney games and Reader Rabbit. They all worked fine before, but suddenly I get the message, "the application failed to initialize properly (oxc0000005)" and I cannot get into these programs.


I also cannot copy anything onto a disk because the DVD device does not seem to be responding.

We use the Mavis Beacon program for homeschooling and my boys have progressed in it pretty far, so I do not want to uninstall/reinstall since we will lose all their work.


Please help.

By the way, I did run Malware Bytes yesterday and it took out 6 infected files, but the problem still exists.

Thanks in advance.

Answer:application failed to initialize properly

If these games are played from a disk, and your dvd rom is giving you trouble, there you go. See if the rom is listed in your device manager without any flags.

2 more replies
Relevance 91.06%

*Sigh*, I love this section but hate to be back.

A few days ago AVG was picking up some recurring spyware and trojans, so I let it do a full system scan then reboot. The viruses it was picking up are gone, however there is still some sort of malware problem. On almost anything I open, a dialog box with the title "Rundll.exe" pops up and displays the message "The application failed to initialize properly." then some error code (0xc0000005)? Several programs stop responding for a while, and svchost.exe is using alot of memory and CPU. I see a few weird things in my HJT log and I'm hoping someone could help me out

Ah, and if it's any help, I remember the name "Huer" popping up on the scanner.
And, It seems that when I open IE, I get viruses located in my temporary internet folder

Here is the log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:33:21 AM, on 8/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\explo... Read more

Answer:The application failed to initialize properly.

I am going to bump this now as it has been 2 full days.

And as an update, my scanner is now picking up Vundo?
I don't know why all of this is happening, I've only come to this site since then
 

2 more replies
Relevance 91.06%

One day, I was just listening to music and I decided to open up a game called Magic Workstation. I have been playing it for over a year now. That was the first time I got the message "The Application Failed to initialize." It also had the code "0xc0000005."

Then I restarted my computer and at startup, MSN Messenger had the same problem. When I ran DDS, there was also this problem, although it managed to still work. There is the same problem with Microsoft Word as well.

Other symptoms include a slower internet explorer.

I have ran a system restore to no luck.

Any help?
DDS (Ver_09-03-16.01) - NTFSx86
Run by Bill at 17:46:45.43 on Fri 10/04/2009
Internet Explorer: 7.0.5730.13

============== Pseudo HJT Report ===============

uStart Page = hxxp://www.google.com.au/
uInternet Settings,ProxyOverride = *.local
TB: Easy-WebPrint: {327c2873-e90d-4c37-aa9d-10ac9baba46c} - c:\program files\canon\easy-webprint\Toolband.dll
uRun: [BgMonitor_{79662E04-7C6C-4d9f-84C7-88D8A56B10AA}] "c:\program files\common files\ahead\lib\NMBgMonitor.exe"
uRun: [ctfmon.exe] c:\windows\system32\ctfmon.exe
mRun: [WinFast2KLoadDefault] rundll32.exe wf2kcpl.dll,DllLoadDefaultSettings
mRun: [WinFoxV2] c:\windows\system32\WF2K.EXE Initial
mRun: [NeroFilterCheck] c:\windows\system32\NeroCheck.exe
mRun: [GrooveMonitor] "c:\program files\microsoft office\office12 ... Read more

Answer:The Application Failed To Initialize Properly

Welcome to the forums!I'm odd dude (OD for friends ;)) and I'll see what I can do for you.The symptoms you're experiencing are indicative of a certain infection, and can be fixed.I see you already have run combofix. Let's download the newest version and run it again.ComboFixIMPORTANT NOTE: ComboFix is a VERY POWERFUL tool. DO NOT use it without expert guidance.ComboFix uses very brute tactics to rip malware off your system. Do not panic if your antivirus software warns you about the file. :!: Please disable all your antivirus software, firewalls, and antispyware software BEFORE running ComboFix!! :!: (If I should give more detailed instructions regarding how to do this, please inform me and do not proceed)Download ComboFix from here and save it to your desktop. Important: Do NOT download the file with the filename ComboFix.exe, but change the name to "Combifax.pif". Please include the "s when saving the file renamed.Disable ALL antivirus/antimalware programs before proceeding!Now start ComboFix.The tool will check whether the Recovery Console is present on your system. If it is not, ComboFix will prompt you whether you would like to install it.If it is not, make sure you are connected to the internet as ComboFix needs to download a file. When you are connected to the internet, click Yes and follow the prompts. When asked whether to continue scanning or to exit, click Yes to continue scanning (no need to disconnect from the internet as Co... Read more

2 more replies
Relevance 91.06%

When I start my computer I get this message.

Application failed to initialize properly 0xc0000005.

After that I click ok and I qam left with a mouse on a black screen. I can move the mouse around but do nothing else. I have tried starting in safe mode but exactly the same problem.

Anyone got any ideaS on how I can solve this problem.

Thanks

Answer:Application failed to initialize properly.

If you press ctrl+alt+del, does this bring up the Task Manager?

If so, click File, New task (Run), and type explorer and press enter.

Then try a System Restore.

1 more replies
Relevance 91.06%

i am getting- this application failed to initialize properly(Oxc0000006).Click on OK to terminate the application, i have been to microsoft help forum tryed there solutions but nothing will work, the only program to load is internet explorer, it wont even let me do system restore

More replies
Relevance 91.06%

Hello,

I've been having a problem lately. Several minutes after I log onto the computer, new programs and the internet cannot be opened, but anything that was previously opened will function. I get the error message: The application failed to initialize properly (Oxc015004). Click OK to terminate the application. Also, when I try to move files into folders, Roxio tries to install (O_o), if that has anything to do with anything.

I know that there can be several causes for this error message, and I'll provide any scans/info that you need.


* Motherboard - Dell Computer Corp.

* CPU ? Intel(R) Pentium(R) 4 CPU 2.40GHz

* RAM ? 512 MB

* Video Card(s) ? 64MB GeForced4 MX Graphics Card with TV-Out

* Hard Drive(s) ? 60 GB Ultra ATA/100 Hard Drive 7200RPMbrand

* Operating System - Windows XP Home Edition

Thanks in advance,

koharu

Answer:Application Failed to Initialize Properly

Bump...

11 more replies
Relevance 91.06%

Hi All, for no good reason this message has started to appear everytime I start the desktop and also when I try to run any of the Office programs. But ultimately they seem to start okALso appears when I try to run Norton Ghost - but it doesn't run.Even more interesting Norton Security centre icon has diappeared from the sys tray and the "anti-phishing/Fraud Protection" notice on the top of the IE7 web browser has disappeared. Norton is still there, but when I click it, nothing runs.I'm a bit terrified I'm going to lose all my data. The MS web site isn't too helpful All was ok until a couple of days ago. Any thoughts, PLEASE...ThanksJB

Answer:The application failed to initialize properly (0xc

System Restore?

3 more replies
Relevance 91.06%

Hello I am having a problem with Valve's Steam.exe. Every time I want to launch the app. I get The application failed to initialize properly (0XC0000005). I click ok and I can't run it. I have been helped a couple days ago with removing some trojans and I am currently malware free. Do you know what is causing this to happen? I am protected and I have scanned 3 more time using diffrent scanners and I am clean... could it be my .NET?:confused
 

More replies
Relevance 91.06%

My Dell inspiron 1545 laptop with 2G ram running at 2.2GHz on VISTA operating system.
While my wife was working on it, it started getting a .NET runtime optimization service has stopped working error. I used repair under programs in the control panel to fix that problem. I then installed the latest service pack and after rebooting when I click on microsoft outlook I get a application failed to initialize properly and will not load.
I ran the kaspersky rescue disk and scanned for virus with none found. I also ran superAntispyware program and found 22 ad ware files that I cleaned out, My AOL program also has the application failed to initialize error.
Is this a virus issue?

Any help would be appreciated.

Here is my system information:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Basic, Service Pack 2, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 2007 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 780 Mb
Hard Drives: C: Total - 223434 MB, Free - 120827 MB; D: Total - 14999 MB, Free - 8200 MB;
Motherboard: Dell Inc., 0G848F
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

Answer:application failed to initialize properly

Sometimes this type of error is caused by a wrong date or time on your computer. Make sure you have the correct date and time.
 

2 more replies
Relevance 91.06%

The application failed to initialize properly (oxc0000135). I seem to have developed the above problem - amy be connected to trying to remove Virus Burst?Is there a simple fix as it seems to be stopping some software from startingMAny THanks

Answer:The application failed to initialize properly (oxc

Try a System Restore to before you got the virus. Start > All Programs > Accessories > System Tools > System Restore.

3 more replies
Relevance 91.06%

I need some help please. When I power up my daughters HP Pavilion ze 2000 windows appears to load, but the blue HP screen freezes and a window pops up stating:
"The application failed to initialize properly (0xc0000005). Click on OK to terminate the application". I've pulled the battery for a good hour to see if it would reset itself, unfortunately the same thing happens each time I power down the computer. I've yet to try to get the computer into safe mode.

Thanks for your help in advance,
Mike
 

Answer:Application failed to initialize properly

Sorry forgot to give you the file name - isass.exe Application error.
 

1 more replies
Relevance 91.06%

Hello,

I have tried to start my computer which runs Windows Vista and I get this message when I try to open Browsers or other programmes.

The application failed to initialize properly (0xc000002)
Can anyone please tell me the easiest way to solve this. This is the first time it has happened and nothing has changed despite me rebooting the computer several times.

Thanks

Answer:APPLICATION FAILED TO INITIALIZE PROPERLY

You can do a System Restore to a time before this happened.
If that fails, Restart the computer and press F8 until you get to the Advanced Boot menu (Safe Mode etc) Here press Repair Your Computer.
If that fails, once the computer boots, go to Start/Search and type CMD Right click the CMD icon in the search results and Run As Administrator. In the Command Prompt type SFC /Scannow and press enter. This will replace any missing files.

1 more replies
Relevance 91.06%

After cleaning up some spyware. Some of my applications failed to start. Is there something that can be done. I've tried to re-load the software several times but keep getting the same error message. Can someone help please!!!!!

Answer:Application Failed To Initialize Properly

^ you should have given the names of those failed
applications sothat someone would be able to respond !

8 more replies
Relevance 90.19%

(The application failed to initialize properly (0xc0000005). Click OK to terminate the application)

i was using my computer to make this movie trailer and then while i was using window movie maker, my computer shut down because i accidently unplugged my divider. then when i turn it back on, the box popped up and after that i restarted my computer several times but its not working. when i open it back up, and click on twice the box disappears but there is nothing except a black screen left! my ctl+alt+del is not working, my safe mode is not working. i dont know what to do!! HELP!! PLEASE!!

More replies
Relevance 90.19%

Iam using gigaspaces example code for "hello world". After compiling in Visual Studio 2008, I was getting the following DLLs missing : MSVCP80.dll and MSVCR80.dll, so i copied from SxS folder to System32. Now when I try to run the program, it gives the following error:

The application failed to initialize properly(0x80000003)

can anyone pls provide me with a possible solution?

Regards,
Roy
 

More replies
Relevance 90.19%

Message received when I tried to login.  Booted to safe mode and working so far. Anybody have a similar problem?
When it let me in regular mode it was just a black screen 

Answer:Application failed to initialize properly (0xc0000022)

Boot into Safe Mode With Networking, this way you should be able to get online and do the following. Please use the following link to provide us with information about your computer so that we can assist you.How to Publish a Snapshot using Speccy Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

1 more replies
Relevance 90.19%

When the computer starts, I see Application Error.


Code:
IWMSWindow : S24EvMon.exe
The exception unknown software exception 0xc0000409 occurred in the application at location 0x0044a920
And when I want start some programs. I see again another error.


Code:
The application failed to initialize properly (oxc0000005). Click on OK to terminate the application.

 

Answer:The application failed to initialize properly (oxc0000005)

s24evmon.exe wireless network diagnostics and configuration.
You may try updating your Wireless software, possibly by Windows updates, otherwise from your computer's or wireless adapter's website.
If not luck there, you may try to disable it through MSConfig. Maybe another way of disabling it - perhaps through Windows Defender. If you are not on Vista, you can download Windows Defender from Microsoft's website.
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
 

6 more replies
Relevance 90.19%

Hello,

When starting up my laptop, i receive a series of following error message:
"The application failed to initialize properly(0xc0000022)." for several programs.

All the programs end in .exe. e.g. skype.exe, iexplore.exe,apoint.exe,etc.

I also get this message:
HPAdvisor.exe. The application has generated an exception that could not be handled. Process ID=0x858(2136), Thread ID=0xfe4(4068)

I am logged in as an administrator.
Since I am unable to access the internet using normal mode, I am currently using safe mode with networking.

Initially, after doing research on the web , I thought the problem was a broken EXE association so i followed the instruction for how to fix this from this page:
Broken EXE Association.

The problem still occured after I restarted my computer and used normal mode.

I then created a new account with admin rights to this user. I restarted and logged in as this new user and recieved this error message:
"userinit.exe-application error application failed to initialize properly(0xc0000022)".

The desktop remains blue and fails to load.

Does anyone know what the problem is and how to fix it? Any help would be greatly appreciated.

Thanks,
meagain

Answer:The application failed to initialize properly(0xc0000022).

Welcome
Lets start with your idea, I tend to agree. It appears to be a problem with the exe extension. Try this tutorial and then report back
Default File Type Associations - Restore
Give this a try, too
Try to reset the exe and lnk (LNK) associations.
Default File Type Associations - Restore
If that does not work, my second thought would be malware. Run an upadated and full anti virus scan
Download and run a full scan with malwarebytes. Get the free edition. If you cannot get online, with another computer, download to a finger drive and then transfer to your computer.
Finally, you may want to try a system restore, go back a week before the problem.
Before the restore make sure this is not a malware or virus problem
System Restore - How to
Good luck

10 more replies
Relevance 90.19%

Hi ,

i have a problem with my windows vista . when i finished the installation of game (virtua tennis 2009) and by the way i used virtual demon tool it gived me (Error : You Inserted the wrong disk ) then i searched in internet to fix this problem i reached the solution by download DfEngine.dll and replace it with the same file in game then when to run the game this error show to me
The application failed to initialize properly (0xc000007b)

so please anybody can help me to fix this problem .

Regards .

Answer:The application failed to initialize properly (0xc000007b)

Hello and welcome to TSF, rafat_arg.

I'd suggest re-replacing DfEngine.dll, as that's when the problem began, correct?

If that's not an option, you can always re-install your video game or your 'virtual demon' tools, although - I have no idea what that program is, what exactly is it? Where did you get both that program and you video game?

2 more replies
Relevance 90.19%

Cannot open any *.exe files to include browsers.
I have tried to do a system restore, but did not help. I have also tried everything in safe mode with no luck.
I have tried to run hijackthis, but it won't run either.
Anyone have any suggestions?
Thank you

Answer:The application failed to initialize properly 0xc0000005

The stop error code oxc0000005 is usually caused by a hardware , or driver issue. Here is a link for further information STOP 0x00000005 - STOP 0x5 INVALID_PROCESS_ATTACH_ATTEMPT - Fix STOP Error 0x00000005.
Regards, Gil777t

9 more replies
Relevance 90.19%

Hey,

I've been trying to install .NET framework 2.0 and it continuously fails,
I've been having a look online for solutions to this and one tells me
to rename mscoree.dll, so I do this and the .NET framework STILL does
not work, I restart my computer and A message ran through very quickly,
explaining it couldn't find mscoree.dll and created a new one.

Then whenever I opened windows messenger I get this message, there
are some other programs as well but I assume these are the ones that use
mscoree.dll

I have windows XP, if someone could help me fix the .NET framework as well,
that would be very helpful. Half way through installation, I get the error,
.NET framework error 25007,
Error 25007.Error occurred while initializing fusion.
 

More replies
Relevance 90.19%

Screen is black with his message:
Application failed to initialize properly (0xc0000005)
Can't even get into XP to do anything about it
Thanks
 

More replies
Relevance 90.19%

I recieve this message when trying to open program Cubase SX2. I have been running Cubase for about a year and have had no problems. It seems to have happened for no reason. I have not installed any new software but I have recently installed a wireless router and connected to the internet.

Could this error be security related?
 

More replies
Relevance 90.19%

I have been trying to load some software on my laptop.
It unzips successfully to the directory, then when I click on the exe file I get the message

"The application failed to initialize properly (0xc0000135). Click on OK to terminate the application."

The software will run on my desktop, but not on either of my laptops.
Unfortunately I need it on a laptop to use in diagnosing a fault in a vehicle.
The desktop and the newer laptop are both running XP Professional and the old laptop is running XP Home.
All computers are up to date with Windows updates etc.

Before I reformat and re-install on the newer laptop, does anyone have any suggestions.....please?

Don
"Disano"

Answer:The application failed to initialize properly (0xc0000135).

A few things to try:
1. Check for viruses and spyware (Spyware Doctor)
2. Try booting in safe mode and try again.
3. Do you have enough memory (RAM) free to run the application?

5 more replies
Relevance 90.19%

Please help: 0xc0000005 Application failed to initialize properly, I get this on start up, when I try to start almost all programs, add/remove programs will not allow me to remove any. This computer was infected with a virus a couple of months ago. This is my son's computer, and I had someone "fix it", they gave it back, and claimed to have removed the virus, and it looked like, I didn't really look at it too much....but then my son said he couldn't open up programs, ect......I am now wanted to figure out what I can do to fix it. I don't want to take it back to where I took it. Please help!!! I ran the fixiedef, and the combo fix, still receiving error when trying to open programs(like Office). Here are the logs and sysinfo.

SysInfo:
ech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 1022 Mb
Graphics Card: NVIDIA GeForce 7600 GS , 512 Mb
Hard Drives: C: Total - 76285 MB, Free - 25121 MB;
Motherboard: Dell Computer Corp., 0F4491, , ..CN481113C5023V.
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
HJT:ech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, ech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 C... Read more

More replies
Relevance 90.19%

i need help .. i keep getting this on just a few of my programs like yahoo massager, my ipod, and to my antivirus program ,, it will not even let me uninstall to reinstall any of my programs i need help
 

More replies
Relevance 90.19%

Running Vista Home Premium SP 1 64 bit...cannot open any *.exe file. I have tried right clicking and having it run as administrator. I have also tried to run hijackthis, but get "Installation directory must be on a local hard drive". The only drive available is the local hard drive.
I have no problems getting into the registry, but am not sure what to look for.
I have tried in safe mode as well. No luck there either.
TrendMicro Antivirus is installed on machine, but does not find anything.
I tried to do a system restore, but that did not help either.
Any help would be appreciated...thanks in advance
 

More replies
Relevance 90.19%

When i start up my computer (WinXP SP2), after i get the welcome screen i receive the error msgs "Application Failed to initialize properly (0xc0000005)" which pops up about 2-3 times. then my deskop top background image loads but nothing else. All my icons that where on the desktop are gone, i have no task bar at the bottom and no time, just the background desktop image. if i press Atl+Ctr+Del, i get the windows task manager. from there i can run most of my programs, however if i try to run the explorer.exe file i receive the msg "Application Failed to initialize properly (0xc0000005)"... i tried to rename the file "explorer.exe" --> "copy of explorer.exe" and if i try to run that it works fine, but if i try and run the original explorer.exe file i get that same msg again. all other programs work fine except when i try to run my music program Cubase SX3 then i get the same msgs part way through loading the program. can anyone help?????
 

Answer:Application Failed to initialize properly (0xc0000005)

7 more replies
Relevance 90.19%

I recently got a whole bunch of VSt's from my producer friend and all of a sudden Pro Tools won't start. I click on the Pro Tools LE icon and I get the windows prompt of:



Pro Tools Application has Stopped Working

If I click view problem details I get this...


Problem Details


Problem signature:
Problem Event Name: APPCRASH
Application Name: ProToolsLE.exe
Application Version: 7.4.0.309
Application Timestamp: 472841cc
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0000005
Exception Offset: 00043387
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: e51a
Additional Information 2: 4c0d4d78887f76d971d5d00f1f20a433
Additional Information 3: e51a
Additional Information 4: 4c0d4d78887f76d971d5d00f1f20a433

Then I chose the option to:

CHECK ONLINE FOR A SOLUTION AND CLOSE THE PROGRAM


Then I get a error message saying
THE APPLICATION FAILED TO INITIALIZE PROPERLY (Oxc0000005). CLICK OK TO TERMINATE THE APPLICATION.


My first reaction was to erase all the VST's and reinstall Pro Tools so that exactly what I did. Still didn't work. I then thought maybe I had a virus so I ran a full scan of Mcafee, Spybot, Adaware, regcure... and Malware remover. Nothing.

I then tried to run pro tools in safe mode and it fires up fine! all the way up to where it needs the M-Box 2. (in safe mode driver doesnt load, obviously) I recen... Read more

Answer:THE APPLICATION FAILED TO INITIALIZE PROPERLY (Oxc0000005)

Quote:





Originally Posted by scottfoobeats



Pro Tools Application has Stopped Working

Problem signature:
Problem Event Name: APPCRASH
Application Name: ProToolsLE.exe
Application Version: 7.4.0.309
Application Timestamp: 472841cc
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0000005
Exception Offset: 00043387
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: e51a
Additional Information 2: 4c0d4d78887f76d971d5d00f1f20a433
Additional Information 3: e51a
Additional Information 4: 4c0d4d78887f76d971d5d00f1f20a433


.. Mcafee.. Adaware.. regcure




Hi -

Th appcrash names the faulting module as the Microsoft Network driver ntdll.dll, timestamp = 4791a7a6 = Fri Jan 18 23:32:54 2008. This is a healthy Vista SP1 driver and not the cause of the crash. The app that crashed is ProToolsLE.exe, time stamp = 472841cc = Wed Oct 31 01:50:20 2007.

The exception code mentioned is important - 0xc0000005 = memory access violation. Whenever I see ntdll.dll & 0xc...5 exception together, I look for a 3rd party firewall as it is usually the #1 cause and is most times able to get away from the scene and allows others to take the recorded blame. I believe your two biggest problems here are McAfee and Ad-Aware. I suggest you remove them both. When both are gone try your app a... Read more

4 more replies
Relevance 90.19%

I've been getting an error saying "the application failed to initialize properly (0xc0000005). click ok to terminate the program" when I start my computer. Then when i try to use program like firefox and windows live messenger, the same error message pops up again.

i've tried restorig the system through safe mode, and it fixes the problem, but after i use firefox or messenger, the message appears again.

More replies
Relevance 90.19%

Okay, well this has been happening for a day and i'm not sure what to do.

The thing is, it's not with just 1 application it's with EVERY SINGLE executable on my system, so i can't open anything.

If anyone can provide me with some information then it would be highly appreciated.

Regards,
~Darbon.

More replies
Relevance 90.19%

I am getting the error message "application failed to initialize properly (0xc0000033)" when i try to open program Cubase SX3. I have been using this program for over a year with no problems running WinXP sp2. I have not installed any new software except Norton System Works and connected a wireless router for the internet. Could this be security related or a Windows/registry error?
 

More replies
Relevance 90.19%

I have a windows xp, until recently, everything runs fine. I regularly monitor and scan my computer.

But lately, after my computer has been on for a while, let's say a day or so, the system would crash and disable any programs from running. Not even the windows task manager would run. It feels like this error only occurs when the computer is out of ram or the system is abnormally trying to access outside of the memory range or the heap. It feels like the registry is slightly corrupted. For the record, normally, my computer can stay on for a week before I have to reboot.

Anyway, when this crash occurs and I open any applications (even the task manager), this error would pop up:
"The application failed to initialize properly (0xc000142)"

When this crash occurs, my computer would freeze up or become extremely slow, such that I can't even restart the computer. But upon a forced turn off and a boot up, it works fine again for another 24 hours or so.

Since this is kind of out of my league, I seek your professional help. (Haha.) I am wondering if this is really a system or a registry problem, or if it is something else. If so, would a registry repair or a system repair do the trick? I am open to any suggestions and solutions.
 

Answer:The application failed to initialize properly (0xc000142)

Reads like a faulty program.Do you use any c/d burning programs and if so which?
 

2 more replies
Relevance 90.19%

A user I've been working with has been recieving a blue screen with the error message "lsass.exe - Application Error The application failed to initialize properly (0xc0000006). Click OK to terminate the application" whenever she boots up her computer. I know that lsass.exe verifies the validity of user logons to the computer. From what I've been able to find online, this is either a side effect of Sassar or she needs to run a repair install. Does anyone have any experience with this issue who can tell me a bit more than the vague suggestions I found on Google? Thanks.

Answer:Lsass.exe: Application Failed To Initialize Properly

Sounds like an infection case and i doubt the version is legit. If it is a legit version after doing my best to clean the infection I would give it a go with a repair installation.

8 more replies
Relevance 90.19%

Hi all,

Few days ago my computer got the Trojan.Vundo. Norton 2003 pro didn't manage to prevent but also to remove the virus. I uninstaleld Norton and I install a trial version of NOD32. Today, I scanned again my hard disc and no threads were found. But still dll files of the Trojan existed. I went to startup and I deactivated the: kdfgj83ke.dll, mlDJwVmJ.dll and nnnlmMcd.dll files that were spoted as files of the virus. When i rebooted by pc, I received the message: "The application failed to initialize properly (0xc0000005)". It appears 2 times after I login and then I can see only the background. Nothing else. I tried safe mode, safe mode with network, VGA, recover system in previous condition. But nothing worked.

I have XP SP2, 2,99 GHZ, 500MB RAM

Thanks

iliana

Answer:The application failed to initialize properly (0xc0000005)

Why did you uninstall Norton?

I hope you realize ANY AntiVirus Utility CANNOT protect you against a virus it does not know about yet. That's why you must update your antivirus protection daily.

This is also why you are most vulnerable if you are online all the time. This maximizes the opportunity of getting infected BEFORE an Malware utility can protect you.

From you post, this is what happened to you. The virus infected your system before Norton had it in its protection file, but it did find-remove after the protection update.

Also, are you running an additional Anti-Spyware utility? You should. This is required by my Corporate IT on all desktops. In the division I am IT Tech for, I use Spybot Search & Destroy (donationware), one of several listed by corporate. I have used this at home for years, since my Win98 days, and it's well known and reliable. But note that the limitations that apply to AntiVirus utilities also apply with Anti-Spyware utilities, cannot protect you against spyware that arrives before they know about it.

To maximize your protection, do NOT stay on-line all the time. Shut down your PC or log-off the desktop. Even if you use broadband network connection, there is an easy you can logoff just like a DialUp connection.

Here's how:In Network Connections, right-click the connection and check BOTH boxes in the General tab (see the network icon in Toolbar Tray all the time)
Now drag a SHORTCUT to the network connection where you want it (D... Read more

4 more replies
Relevance 90.19%

Hi Can anyone helpe me.

I get this message come up a lot on my PC, when shutting down

the application failed to initialize properly (0xc0000142) Click Ok to terminate the application.

Can someone tell me if there is anything I can do to get rid of the message. Is it something to worry about or just ignore?

PC is Windows XP

Many thanks

Answer:Application failed to initialize properly (0Xc0000142)

Look in Event Viewer and find out what application is cited, if any.

2 more replies
Relevance 90.19%

Every time I turn on my computer this come up: The application failed to initialize properly (0xc0000142). Click on Ok to terminate the application. I've tried to click on OK but nothing seems to happen. What should I do?

Answer:The application failed to initialize properly (0xc0000142).

Boot into Safe Mode and run an app such as MalwareBytes or SpyBot Search & Destroy.

The error you are seeing may also be giving you a file name or program name, from Safe Mode you can open regedit and remove any references to that file/program.

1 more replies
Relevance 90.19%

Hi Guys,

So I have been having this issue with a program crashing and displaying a error message. Also just a note, When the icon to start the application is clicked the program automatically displays the error. So I never actually get into the application. The error message reads "application failed to initialize properly 0xc0000005" (0xc0000005 means an access violation memory error occurred)

Now this is odd because the program works on other computers(of all different types)amd64, amd64x2, Intel core2duo, Intel celeron D, and a regular Intel P4 board. All with various different rams and such, leading me to assume this is not a hardware problem.

I have tried to use the built in program error debugger in windows "Dr. Watson" to get a error log. but for some reason the program does write to the file.

If anyone knows of any common problems associated with this error or fixes for it, please let know.

-Thanks

Answer:application failed to initialize properly 0xc0000005

It would help to know what program is causing the error ....

10 more replies
Relevance 90.19%

Hi Guys,

So I have been having this issue with a program crashing and displaying a error message. Also just a note, When the icon to start the application is clicked the program automatically displays the error. So I never actually get into the application. The error message reads "application failed to initialize properly 0xc0000005" (0xc0000005 means an access violation memory error occurred)

Now this is odd because the program works on other computers(of all different types)amd64, amd64x2, Intel core2duo, Intel celeron D, and a regular Intel P4 board. All with various different rams and such, leading me to assume this is not a hardware problem.

I have tried to use the built in program error debugger in windows "Dr. Watson" to get a error log. but for some reason the program does write to the file.

If anyone knows of any common problems associated with this error or fixes for it, please let know.

-Thanks

Answer:application failed to initialize properly 0xc0000005

Have you reinstalled the Program? Updated any drivers related to it?


A hijackthis log may be a good idea, along with a registry cleaner such as but not limited to regseeker.

2 more replies
Relevance 90.19%

Hi.

I am experiencing several errors on my work PC when trying to run applications like MS Excel, Internet explorer, MS Outlook...i think all the applications in my PC failed to start.
These are the several windows error messages which appears while trying to run programs:
C:\Windows\WinSxs\....\comctl32.dll is not a valid Windows image. Please check this against your instalation diskette.

Not enough quota is available to process this command.

Insufficient system resources exist too complete the reguested service.

Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item.

The paging file is too small for this operation to complete.

The application failed to initialize properly (0x0000142). Click Ok to terminate the application.
I have this problem few weeks, as this my PC in work, it is protected against viruses with up to date Symantec Endpoint Protection. I have done several full scans, but no infection was found by the antivirus. Then I reimaged my system, after that my Pc was running Ok, but just 3-4 days. And then this occuring again. To not to forget to mention, sometimes IE, outlook etc. launch without problem, mostly just right after restart, or just random I dont know. But it is really confusing as I can't work on my PC most of the time.
Could you please help with this?

Here is my log:
DDS (Ver_09-12-01.01) - NTFSx86
Run by sikuda at 13:38:41.72 on Wed 12/09/2009
Intern... Read more

Answer:The application failed to initialize properly (0x0000142)

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 90.19%

Hello folks,

This afternoon I tried printing a document from Serif PagePlus, but for some reason or other the printer's "properties" window wouldn't come up, so I quit PagePlus and tried to reopen it - and found that it "encountered a problem and needs to close". I tried opening it several times, and got the error each time, so I figured something was corrupted and I'd have to reinstall it. I then tried to edit an image in PhotoPlus, and got a different error:

The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.

I opened a few of my other Serif apps, and sure enough, they had this error too (except PagePlus, which still crashed "normally"). Then I decided to see if it was only a problem with Serif programs (perhaps a messed up registry key that they all share or something), and opened a few other programs. Most of them worked all right, but I found that Windows Movie Maker, and several program installer executables do the same thing (the PagePlus installer, on its CD, ran all right, but reinstalling didn't fix anything).

Anyone know what I can do to fix this? Oh, and I'm running Windows XP Service pack 2. Thanks!

Answer:The application failed to initialize properly (0xc000007b)

I think the error message may be caused by the WORM_KLEZ.E virus, or one of its variations. If you can, Navigate to C:\windows\minidump and Zip the recent minidumps and attach them here, there labeled by date.
also think that norton might not find it, but update and run your latest anti-virus software,

7 more replies
Relevance 90.19%

The same thing happens to me when i open a program it says failed to initialize properly:

Logfile of HijackThis v1.99.1
Scan saved at 7:24:17 PM, on 8/13/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5296.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\ibmpmsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\S24EvMon.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\iolo\System Mechanic Professional 6\IoloSGCtrl.exe
C:\Program Files\Symantec AntiVirus\SavRoam.exe
C:\WINDOWS\system32\ssisvr32.exe
C:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindService.exe
C:\WINDOWS\System32\svchost.exe
c:\program files\lenovo\system update\suservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Documents and Settings\purbhook\Desktop\HijackThis!.exe

O4 - HKCU\..\Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
O4 - HKCU\..\Run: [MSMSGS] "C:\Program Files\Messenger\msmsgs.exe" /backgro... Read more

Answer:I have got "the application failed to initialize properly

Hi and welcome. What program, and does this apply?
http://support.microsoft.com/default.aspx?scid=kb;en-us;822520
 

2 more replies
Relevance 90.19%

At some point today I started getting an application error, title says it all. "The application failed to initialize properly (0xc0150004). Click on OK to terminate the application."

The problem however, is that this is not isolated to one specific program. When it starts happening, it happens to any and every program I attempt to open. I can restart my computer, and it will function properly for a little while, but eventually the error begins popping up again. I can't use start>run, I can't even access start>programs when the error is up.

HELP!!

More replies
Relevance 90.19%

Hi - I have an extremely big issue I'm facing with some applications. For a few of my applications (assuming they are all dot net) they come up with this error message "the application failed to initialize properly", twice. One of the programs are my project exe (From Visual Basic 2008) and a modelling program called milkshape 3d. They both come up with these errors (and a few more applications come up with this error as well). I ran an antivirus and it picked up nothing. This started to happen when I opened an application and apparently tweaked the registry. I tried fiddling with Data execution prevention and starting it in safe mode. Again, the errors arose.

Anyways, here are the event logs if required:

~ms3d.exe:~

Code:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 12/6/2012
Time: 6:37:27 PM
User: N/A
Computer: YOUR-AE86371079
Description:
Application popup: ms3d.exe - Application Error : The application failed to initialize properly (0xc0000005). Click on OK to terminate the application. For more information, see Help and Support Center at [URL]http://go.microsoft.com/fwlink/events.asp[/URL].
my visual basic 2008 application:

Code:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 12/6/2012
Time: 6:38:31 PM
User: N/A
Computer: YOUR-AE86371079
Description:
Application popup: BluedinoEdito... Read more

Answer:The application failed to initialize properly (0xc000005)

7 more replies
Relevance 90.19%

Hi,

I have developed an Windows application using C# that has a single form and only one button. On button click i have written the code to run an .exe file(developed in Visual C++ Win32). I ran the application diffrent Windows XP machine its working fine, but when i ran this application on Windows Vista machine thn it shows the following error message
"The Application failed to initialize properly (0xc0000005). Click OK to terminate the application."

I have also ran this application through "Administrator" account.

Please help me out why its throwing error on Vista machine only.


-Thanks
Kapul Bhatnagar

Answer:The Application failed to initialize properly (0xc0000005)

Hi -

0xc0000005 is an NT STATUS exception code = memory access violation

Usually I see 0xc..5 exceptions related to 3rd party firewalls. What anti-virus package do you have and does it have a firewall?

Regards. . .

jcgriff2

.

1 more replies
Relevance 90.19%

hi all im new to the forum,basically cause iv never had any problems with my comp before but now i have a really big 1 thats getting very anoying now and was hoping theres some kind person out there could possibly help me lol! before i start my name is daniel btw nice to meet you all!

the problem is my computer will not let me access 80 percent of the stuff i use,every time i try getting into my messanger,internet explorer,games,downloaded stuff like music sites i get a message (that i have to say i wish i could turn into a computer virus and beat the crap out of it)
"the application failed to initialize properly (0xc0000005) click ok to terminate the application" i cant use anything! i cant download anything to try and fix it either cause every time i do it says it failed to initialize!!!!!!!!!!!!!!!! please please help!!!!!!

Answer:the application failed to initialize properly (0xc0000005)

Hello, and welcome to TSF.

Have you tried to defragment or run scandisk? You could also have a bad RAM module. If you can, try to defrag and scandisk first. If neither will run and/or you run them successfully and still have problems then my first suspect would be RAM.

You could open your case and see if you have two or more RAM modules. If you have more than one, you could remove all but one and try to run your computer. If the problem persists then remove the one that was left in and replace it with one of the modules that you removed. Repeat this process with each RAM module one at a time until you have tested all of them. If at some point the computer works then you have found the bad RAM and you can replace it.

If you are uncomfortable opening your case then download and run memtest86. If you test the RAM and have a bad module you will still have to open your case to replace any bad modules but at least you will have an idea of the root of your problem.

You might need to borrow somebody's computer at this point, preferably a PC with a CD burner. Do a google search for memtest86. The first link in the search results will take you to their web page. In the black sidebar click 'free download'. The first link will be 'ISO image for creating bootable CD (Windows - zip)'. Click that and download and burn the ISO.

Place the disk in the malfunctioning computer and reboot the computer. The PC should see it during the boot process and begin to run th... Read more

2 more replies
Relevance 90.19%

WinXP home - message on start-up -
"Userinit.exe Application failed to initialize properly (0xc0000142). Click on OK to terminate."

Click on OK and nothing. (I can get into safe mode)

Note: Not sure if this is a security or WinXP problem.

I suspect something has been added to the program start.
I've included two logs here.
1) Staruplist & 2) Hijack this log. (I've run the latest spyware stuff. next I'll check the win critical updates.

Looking for assistance. (Also checking the MSKB and googleing for more info)
****************************************
Startup log
****************************************

StartupList report, 18/10/2004, 11:41:47 PM
StartupList version: 1.52
Started from : C:\Utilities\startuplist\StartupList.EXE
Detected: Windows XP (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 (6.00.2600.0000)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Utilities\startuplist\StartupList.exe

--------------------------------------------------

Listing of startup folders:

Shell folders Startup:
[C:\Documents and Settings\Megan\Start Menu\Programs\Startup]
PowerReg Scheduler.exe

S... Read more

Answer:winxp - application failed to initialize properly

7 more replies
Relevance 90.19%

Okay, so I've been working on my computer since yesterday morning, and actually ended up fixing a problem. However, this is the new problem I'm facing.

I turn on my computer. Nothing loads except the wallpaper (no taskbar, start menu, etc.) The error message comes up "The application failed to initialize properly (0xc0150002)", in reference to explorer.exe.

I click ok and cannot do anything. If I press ctrl + alt + delete the windows security pops up and I can click task manager, but nothing happens. I've tried running in safe mode and I get pretty much the same thing. I've run in safe mode with command prompt and tried following advice from previous posts all throughout Google, but nothing will come up.

I've also tried messing around in the Recovery Console, but everything I try doesn't seem to work. Based on Google results it seems a lot of people have had a similar problem to mine, but mine seems to be different in the fact that I cannot do anything.

Normally I would of just given up and reformatted my computer, but there are important things I'd like to get at on the computer that I don't want to lose.

It's a vaio laptop, fyi. Windows XP.

Any help would be much appreciated.
 

Answer:The application failed to initialize properly (explorer.exe)

Easy thing to try first. Remove all power from the computer: remove power lead and battery, and hold 'on' button down for 30 seconds. Reconnect and try booting.
 

3 more replies
Relevance 90.19%

HELP! this comes up when i log in to windows, and although i can log in there are no desktop items or bar at the bottom, just my wallpaper.
i can run programs through ctrl alt delete.

i have followed some instructions and have a hijackthis log, which i have posted below

thanks so much to anyone that can help, im really stuck.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:40:32, on 02/08/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logishrd\lvmvfm\LVPrcSrv.exe
C:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\system32\CTSvcCDA.EXE
C:\Program Files\Kontiki\KService.exe
C:\Program Files\McAfee\MBK\MBackMonitor.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
c:\PROGRA~1\COMMON~1\mcafee\redirsvc\redirsvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\Program Files\McAfee\MSK\MskSrver.exe
C:\WINDOWS\system32\nvsv... Read more

Answer:Application Failed to initialize properly (0xc0000005)

Hi, Welcome to TSG!!

Please download (save) SmitfraudFix (by S!Ri) to your desktop. SmitfraudFix runs under W2K, XP only.

Extract the content (a folder named SmitfraudFix) to your Desktop. Select all of the contents and Extract them
to a new folder called SmitfraudFix.
Open the SmitfraudFix folder and double-click smitfraudfix.cmd
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consulting/proc...processutil.htm
 

1 more replies
Relevance 90.19%

Hi,
As per tirle.
This particular message pops up on a piece of software that i use.
I used this software many times without an issue but today when i clicked on its icon the message pops up.
I removed the said software & installed it again but same message pops up.

Any advise how i can go about what is causing this to happen.

Thanks
Win xp Laptop
I dont have it connected to internet as its just something i use now & then as i use pc with internet connection.
 

Answer:Application Failed To Initialize Properly (0xc0000034)

Check to make sure graphics drivers on that system are up to date.
Run sfc /scannow
http://www.helpwithwindows.com/WindowsXP/howto-24.html?PageSpeed=noscript
Run Check Disc
http://www.wikihow.com/Run-a-Chkdsk-Function-on-Windows-XP
 

38 more replies
Relevance 90.19%

I have a home computer running WinXP SP2. When logging in user mode all the users get similar error messages:Application failed to initialize properly (0xc0000022). Click OK to terminate the application. Included in those applications is my anti-virus software Symantec Norton 360.It does not happen when I log in as Administrator. I don't want to give my kids admin privileges, please help!Here is a copy of the HijackThis fileLogfile of Trend Micro HijackThis v2.0.0 (BETA)Scan saved at 10:09:46 PM, on 6/4/2007Platform: Windows XP SP2 (WinNT 5.01.2600)Boot mode: Safe modeRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\Explorer.EXEC:\Downloads\HiJackThis_v2.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ycomp/def.../search/ie.htmlR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/ycomp/def...//www.yahoo.comR0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.my.yahoo.com/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157R1 - HKLM\Sof... Read more

Answer:Application Failed To Initialize Properly (0xc0000022)

Hello murf and welcome to the BC HijackThis forum. We are currently not using TrendMicro's version of HijackThis on the forums because it is still in beta. This means that it has not been released as a stable version at this time and could contain issues that have not been resolved yet. The most current stable release is version 1.99.1 and can be found here.In regards to the error message, that particular error is caused by insufficient access rights to the files required for the applications. This means that either the users and/or groups that the users belong to cannot get to the files they need to run the application.The HijackThis forum deals exclusively with virus and malware issues. HijackThis does not have the capability to analyze performance, hardware or application issues. For these types of issues I would suggest posting to the Windows XP Home and Professional forumThe techs in that forum specialize in matters pertaining to the operating system, performance and applications. Let them know that you have been to this forum and that no malware was found.When posting to any other forum, do not post a HijackThis log or the post will simply be moved back to this forum for infection analysis. That is what HijackThis is used for and that is what we specialize in here in this forum.Also, when posting in any other forum for assistance, give as much detail as possible regarding any issues that are occurring. The more information they have, the better the techs can analyze the... Read more

3 more replies
Relevance 90.19%

Every time I log on to my laptop it comes up with the error
The application failed to initialize properly (0xc0000005) i cant press start or nothing... I tried logging on with safe mood like suggested but it comes up with a black screen with corners saying safe mood..what to do i do????????

Answer:The application failed to initialize properly (0xc0000005)

Hi Beeeeee,

Welcome to TSF!

Do a START>RUN and type in "sfc /scannow" without the quotations. Press Okay and let this roll, this should sort the (0xc0000005) error

3 more replies
Relevance 90.19%

When i boot my computer i get this message "application failed to initialize properly (0xc0000005)" twice. After clicking ok i get a black screen and thats it. What do i do now?

More replies
Relevance 90.19%

Hi,I am new to this forum and I am looking for help. I have two problems1. When I restart the computer I get the error messageiexplore.exe - Application ErrorThe application failed to initialize properly (0xc0000142). Click OK to terminate the application.2. If I try to run IExplore (6) it takes a loooooong time to open, of course it also shows the same error messageI have Windows XP and IExplorer 6. I have run the Hijackthis and this is what I found. Any help with this issue will be greatly appreciated.Mirtha-------------------Logfile of HijackThis v1.99.1Scan saved at 10:00:20 PM, on 1/23/2007Platform: Windows 2000 SP4 (WinNT 5.00.2195)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINNT\System32\smss.exeC:\WINNT\system32\winlogon.exeC:\WINNT\system32\services.exeC:\WINNT\system32\lsass.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\spoolsv.exeC:\WINNT\System32\CI_SERV.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\hidserv.exeC:\WINNT\system32\regsvc.exeC:\WINNT\system32\MSTask.exeC:\WINNT\system32\Sim9Sync.exeC:\Program Files\Analog Devices\SoundMAX\SMAgent.exeC:\WINNT\System32\WBEM\WinMgmt.exeC:\WINNT\system32\mspmspsv.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\ifccsc21.... Read more

Answer:Iexplore.exe The Application Failed To Initialize Properly...

Hi,I see Derek is already helping you here:http://forums.techguy.org/web-email/537360...tml#post4384254So I am going to close this thread, because more than one helper dealing with your log is confusing.So now we can move on and help someone else instead.

1 more replies
Relevance 90.19%

Whenever i open a application of any kind (internet explorer, norton, nero, media player, etc) i get a error The application failed to initialize properly (0xc0000005). i using someone computer right now and i really need help!!
The application failed to initialize properly (0xc0000005).

Answer:The application failed to initialize properly (0xc0000005)

have you rebooted?

9 more replies
Relevance 90.19%

I'm running Win XP3 When I try to start firefox 49 or any version I get this notice " The application failed
to initialize properly (0XC0000005) i'VE TRIED RUNNING IE 6.0  GOOGLE CHROME, MAXTHON  none of them work either
But I can run windows in the safe mode and it works fine.
Any help in this matter would be appreciated.
 
I have also ran malware bytes  superantispyware  adw cleaner and nothing changed.
 
 
 
 
Thank you
tc454

More replies
Relevance 90.19%

Been given an XP PC to look at which displays this message when trying to open some programmes (varied - AVG, HP, and others). Google has been no help at all. Anyone experienced this before please?

Answer:The Application failed to initialize Properly (0xc0000034)

P.S. Forgot to mention, tried scannow - running chkdsk at the moment.

6 more replies
Relevance 90.19%

Application Failed to initialize properly (0xc0000005)
When i try to run any programs the error msgs "Application Failed to initialize properly (0xc0000005)" which pops up about 2-3 times. I saw a post that was closed back in '06. I tried downloading hijack this via the link and when i double-click on it i get the same error message "Application failed to initialize properly (0xc0000005) can anyone help?????
 

Answer:Application failed to initialize properly (0xc0000005)....

I was able to run the HijackThis and get a log (see below):

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:34:16 PM, on 1/10/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\System32\ati2evxx.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\McAfee\MBK\MBackMonitor.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\WINDOWS\Explorer.EXE
c:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Program Files\QUICKENW\QAGENT.EXE
C:\WINDOWS\system32\atiptaxx.exe
C:\WINDOWS\system32\mrtMngr.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcsysmon.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\... Read more

1 more replies
Relevance 90.19%

Each time i open a application like a adware program or IE i get a popup error "The application failed to initialize properly (0xc000005)"".
 

More replies
Relevance 90.19%

I am getting this error on pretty much all applications. I cannot open IE or Firefox, cannot run malwarebytes, iTunes, MS Office...Anything with *.exe extension.
I did try to do it in safemode as well, but still nothing. Can anyone help?

Thanks in advance

Also, I have tried to run as Admin with same results.

Answer:Application failed to initialize properly (0xc0000005)

Originally Posted by justmebeingme


I am getting this error on pretty much all applications. I cannot open IE or Firefox, cannot run malwarebytes, iTunes, MS Office...Anything with *.exe extension.
I did try to do it in safemode as well, but still nothing. Can anyone help?



Hello justmebeingme;

According to this link: Urgent - The application failed to initialize properly - 0xc0000005

You problem could be the Trojan "Haxdoor". It was suggested that AdAware could find and remove it.

Also suggested is to boot to safemode with networking and go to the Panda live scan web site: FREE ANTIVIRUS - Download ActiveScan 2.0 and clean your PC - PANDA SECURITY
and let Panda scan your computer and remove the Trojan.

Hope this helps!
Robert

3 more replies
Relevance 90.19%

Hello there

I have just received the error message "application failed to initialize properly (0xc0000033)" when i try to open Steinberg's Cubase SX2. I have not had this problem before and have been running this app successfully for 1 & 1/2 yrs.

Recent installs include only Google Earth and perhaps a Microsoft security update or two.. I am running WinXP SP2, have tried system restore on 8-10 separate dates with no success.

Help would be greatly appreciated.

Answer:Application failed to initialize properly (0xc0000033)

If it is only this program generating the error, try to reinstall it.

9 more replies
Relevance 90.19%

I know this has already been posted somewhere else, but I didnt want to follow along with that one in case my results are different.

Windows XP Service Pack 2

This happens with Rundll32.exe and with userinit.exe during start up. When logging in I have to open task manager and manually start explorer.exe

Here is the Hijack This log

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:34:14 PM, on 8/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16674)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\BitDefender\BitDefender Update Service\livesrv.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\BitDefender\BitDefender Arrakis Server\bin\Arrakis3.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\SPEEDB~1\VideoAcceleratorService.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\explorer.exe
C:\Program Files\BitDefender\BitDefender 2009\bdagent.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\PROGRA~1\SPEEDB~1\VideoAcceleratorEngine.exe
C:\PROGRA~1\Yahoo!\MESSEN... Read more

Answer:The application failed to initialize properly (0xc0000005)

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

1 more replies
Relevance 90.19%

Hey, I have the exact same problem as another person posted on here. This message included was what they typed
Application Failed to initialize properly (0xc0000005)
When i start up my computer (WinXP SP2), after i get the welcome screen i receive the error msgs "Application Failed to initialize properly (0xc0000005)" which pops up about 2-3 times. then my deskop top background image loads but nothing else. All my icons that where on the desktop are gone, i have no task bar at the bottom and no time, just the background desktop image. if i press Atl+Ctr+Del, i get the windows task manager. from there i can run most of my programs, however if i try to run the explorer.exe file i receive the msg "Application Failed to initialize properly (0xc0000005)"... i tried to rename the file "explorer.exe" --> "copy of explorer.exe" and if i try to run that it works fine, but if i try and run the original explorer.exe file i get that same msg again. all other programs work fine except when i try to run my music program Cubase SX3 then i get the same msgs part way through loading the program. can anyone help?????

I did the first peice of advice given and downloaded Hijack This and performed the scan and saved the log. You then said not to delete anything and that someone needs to analyse the log for me. I have this log saved and will post it below. Any help possible would definitely appreciated. Thankyou so so so much

Logfile of Trend Micro H... Read more

Answer:0xc0000005 Application failed to initialize properly

16 more replies