Computer Support Forum

Vdrvroor.sys missing - details

Question: Vdrvroor.sys missing - details

Hi,

I need your help. First, today my sister told me that the house power outage and the pc shut down and when I got home from work I turn on the pc and I got a missing drivers. the screen that tell you what you want to do when you get inappropriate shutdown - safe mode, start windows normally, etc... screen. i have windows win 7 64 bit with sp1 retail. so I selected start windows normally, but I get a screen that tell me about a missing or corrupt file. \windows\system32\drivers\ndis.sys and status: 0xC000032 (hope i remember it right)
So I didn't think that a electrical outage will cause a serious problem to the file vdrvroot.sys file.

i even tried with option start with last good known configuration and still get same problem.

so I load windows 7 dvd and went into repair computer and lets the thing auto fix for couple time and reboots and still get same problem.

so this time i didn't let the program auto fix and i browse my directory and I went into /windows/system32/config and change the name of software file and system fil to software.old and system.old and then i went to /windows/system32/config/regback and copy the software and system files and paste it to /system32/config and restart my pc and it booted in pass that missing vdrvroot missing file error(not sure if i did more auto fix by windows 7 repair by disk). anyway, when it log in screen. i got a pop up that say LogOnUI.exe error, like file is missing and NSDIS.SYS is missing.

so i have been searching for way to fix my problems. I am not sure if vdrvroot.sys is related to nsdis and logonui error. Also my program icons are not completely loaded and symantec antivirus is not loaded.

more symptoms:
right-click on "Computer" and click property open up System property. but mine say "Page failed to load".
Catalyst Center failed to load. it seem catalyst had been uninstalled. i don't see it on the list when i right-click on desktop drop down.
I tried to install other program but i get error telling me nsdis.sys is missing.

here is a hijackthis log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:10:12 PM, on 12/27/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\SysWOW64\rundll32.exe
C:\Windows\SysWOW64\HsMgr.exe
C:\Program Files (x86)\Belkin\Nostromo\nost_LM.exe
C:\Program Files (x86)\MagicDisc\MagicDisc.exe
C:\Program Files (x86)\Renesas Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe
C:\Program Files (x86)\Intel\Intel(R) Rapid Storage Technology\IAStorIcon.exe
C:\Program Files (x86)\Common Files\Symantec Shared\ccApp.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\Winamp\winampa.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\NaruHina\Downloads\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896" target="_blank" class="invilink">http://go.microsoft.com/fwlink/?LinkId=54896" target="_blank" class="invilink">http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157" target="_blank" class="invilink">http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
F2 - REG:system.ini: UserInit=userinit.exe
O2 - BHO: RealPlayer Download and Record Plugin for Internet Explorer - {3049C3E9-B461-4BC5-8870-4C09146192CA} - C:\ProgramData\Real\RealPlayer\BrowserRecordPlugin\IE\rpbrowserrecordplugin.dll
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCometBHO_1.5.4.11.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll
O4 - HKLM\..\Run: [NUSB3MON] "C:\Program Files (x86)\Renesas Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe"
O4 - HKLM\..\Run: [IAStorIcon] C:\Program Files (x86)\Intel\Intel(R) Rapid Storage Technology\IAStorIcon.exe
O4 - HKLM\..\Run: [ccApp] "C:\Program Files (x86)\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe"
O4 - HKLM\..\Run: [StartCCC] "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun
O4 - HKLM\..\Run: [WinampAgent] "C:\Program Files (x86)\Winamp\winampa.exe"
O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun
O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User '?')
O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User '?')
O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User '?')
O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User '?')
O4 - HKUS\S-1-5-21-37517634-3715731611-3957572906-1000\..\Run: [PlayNC Launcher] (User '?')
O4 - S-1-5-21-37517634-3715731611-3957572906-1000 Startup: MagicDisc.lnk = C:\Program Files (x86)\MagicDisc\MagicDisc.exe (User '?')
O4 - Startup: MagicDisc.lnk = C:\Program Files (x86)\MagicDisc\MagicDisc.exe
O4 - Global Startup: Nostromo Loadout Manager.lnk = ?
O8 - Extra context menu item: &D&ownload &with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddLink.htm
O8 - Extra context menu item: &D&ownload all with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddAllLink.htm
O9 - Extra button: BitComet - {D18A0B52-D63C-4ed0-AFC6-C1E3DC1AF43A} - res://C:\Program Files\BitComet\tools\BitCometBHO_1.5.4.11.dll/206 (file missing)
O11 - Options group: [ACCELERATED_GRAPHICS] Accelerated graphics
O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing)
O23 - Service: AMD External Events Utility - Unknown owner - C:\Windows\system32\atiesrxx.exe (file missing)
O23 - Service: ASUS HM Com Service (asHmComSvc) - Unknown owner - C:\Program Files (x86)\ASUS\AAHM\1.00.13\aaHMSvc.exe
O23 - Service: BitComet Disk Boost Service (BITCOMET_HELPER_SERVICE) - www.BitComet.com - C:\Program Files\BitComet\tools\BitCometService.exe
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files (x86)\Common Files\Symantec Shared\ccSvcHst.exe
O23 - Service: Symantec Settings Manager (ccSetMgr) - Symantec Corporation - C:\Program Files (x86)\Common Files\Symantec Shared\ccSvcHst.exe
O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing)
O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing)
O23 - Service: Futuremark SystemInfo Service - Futuremark Corporation - C:\Program Files (x86)\Futuremark\Futuremark SystemInfo\FMSISvc.exe
O23 - Service: Intel(R) Rapid Storage Technology (IAStorDataMgrSvc) - Intel Corporation - C:\Program Files (x86)\Intel\Intel(R) Rapid Storage Technology\IAStorDataMgrSvc.exe
O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing)
O23 - Service: LiveUpdate - Symantec Corporation - C:\PROGRA~2\Symantec\LIVEUP~1\LUCOMS~1.EXE
O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing)
O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing)
O23 - Service: nProtect GameGuard Service (npggsvc) - Unknown owner - C:\Windows\system32\GameMon.des.exe (file missing)
O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing)
O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing)
O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing)
O23 - Service: Symantec Management Client (SmcService) - Symantec Corporation - C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\Smc.exe
O23 - Service: Symantec Network Access Control (SNAC) - Symantec Corporation - C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\SNAC64.EXE
O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing)
O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing)
O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing)
O23 - Service: Symantec Endpoint Protection (Symantec AntiVirus) - Symantec Corporation - C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\Rtvscan.exe
O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing)
O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing)
O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing)
O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing)
O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing)
O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing)
O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing)

--
End of file - 8441 bytes


hope someone can tell me something . thank you.

Relevance 100%
Preferred Solution: Vdrvroor.sys missing - details

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Vdrvroor.sys missing - details

"so I load windows 7 dvd and went into repair computer"...

Boot from the Windows 7 disc and select "advanced options" when you see the partitions, delete the current partition and format. Start a fresh install of Windows 7 and all the updates

3 more replies
Relevance 50.43%

Why my details tab missing in properties? in any file!

like this pic: (JPEG File)

By omereilon at 2012-05-24

and this pic: (MP3 File)

By omereilon at 2012-05-24

it happens in exe file too! in any file1
please help me to fix it quickly!!!

Thanks advance

Answer:Details tab missing in properties!

You may want to carry out a virus scan, for which Malwarebytes is eminently suitable: Malwarebytes : Malwarebytes Anti-Malware PRO removes malware including viruses, spyware, worms and trojans, plus it protects your computer

Your user account may be corrupted so you could try creating a new account to see whether that has the same problem.

9 more replies
Relevance 50.43%

The Links details on my IE7 Toolbar have suddenly gone missing. The word Links is still on the left hand side of the space for the toolbar but it is completely inactive when I click on it or anywhere else in the bar area. Neither can I drag URLs to this area. Under Tools the Link option is ticked & Lock the Toolbars is unticked. Does anyone have any ideas on how this has happened & how it can be rectified?

Answer:Link details missing

If Lock Toolbars isn't ticked then you should have a faint vertical line to the left of the word Links. If you hover your cursor over this it should change to a double headed arrow and you should then be able to drag the links area out or move it onto another toolbar.

2 more replies
Relevance 49.61%

Hello, my programs and features screen (uninstall or change a program), is missing the details (publisher, installed on, size, version) after I uninstalled itunes from my second hard drive. What can I do to fix it?

I have attached a picture to further explain the issue, thank you.

Answer:Programs and features details missing.

Try right clicking on the column named Name...
...and selecting the other columns of interest from the context menu:

9 more replies
Relevance 49.61%

Originally when XP installed, for pictures, when File\Properties was selected the pane had two tabs: 'General' and 'Summary'. Now only the General tab shows in the pane. The Summary could then be expanded to 'Advanced' which showed all the meta data for the picture, i.e. details of the camera, exposure, f number, etc. This was very useful.The change may have occured when I included a Windows update. I have included all the Windows updates available for XP from the Microsoft site.Why is this second tab 'Summary' not now available? Any ideas or suggestions most welcome.

Answer:Windows XP Pro - missing details in Properties

click hereOpen Notepad.Go to the link above and copy the text (starting from REGEDIT 4 onwards) and paste it in Notepad.Then in Notepad click Save as. In the box: save as type, select All Files. Then save the file as image.reg somewhere on your computer.Then back up the relevant registry hive. click Start, Run, type regedit and press Enter.On the left, highlight HKEY Classes Root. At the top left, click Registry, Export registry file, and save it as ClassesRoot.reg, at a location you remember. Exit Regedit.Then go to image.reg file. Right click and select Merge. Confirm.Try and see if the Summary tab comes back (restart if necessary).If the tab comes back, and image files and programs open correctly (give it some time), you can delete the backed up ClassesRoot.reg file.

2 more replies
Relevance 49.61%

hi,

my father started using the internet on his laptop again lately but I noticed that there is something unusual about how the web pages are displayed. this happens in both firefox and internet explorer. i have attached an image of what gmail looks like.

any help would be great thanks!!
 

More replies
Relevance 49.61%

As the title says, all of a sudden i have missing file info in the details pane, i have a lot of digital media and usually when i click on it it shows me every from its name to audio type, date modified etc..all of a sudden it no longer shows me what audio, chapters or subtitles etc..from the screenshot below a lot of info that used to be there now isnt....any help would be appreciated

Answer:missing information in the details pane

How to Customize the Details Pane in Windows 10

1 more replies
Relevance 49.61%

This started happening all of a sudden...when I right-click on an mp3 and look under the Details tab, all of the information (artist, album, bitrate, etc.) is completely blank and it doesn't let me change it. iTunes can see the details no problem.

Anyone know what's causing this? Thanks.

(using Win7 x64)
 

Answer:Win7 - Missing Details in Explorer...?

Explorer can't recognize ID3v2.4 tags.
 

3 more replies
Relevance 49.2%

Until recently, when using Windows Explorer, I was able to right click on an mp3 file, select properties, then the details tab and thus be able to see title, artist, album and other information.Now when I right click, I don't get the details tab (for any type file). What could have changed? Thanks

Answer:Win7 Explorer file Details tab missing?

A Windows update may have changed the options for security or stability reasons. The effect may not have been their direct intention, but a result of 'fixing' something else. You can still get this information in Windows Media player (or what ever they are calling it these days) or in Real Player.You have to be a little bit crazy to keep you from going insane.This site is about helping people, lets keep it that way.

4 more replies
Relevance 49.2%

Hi Guys

In my pictures, thumbnail view, the text that names each folder has dissapeared. Any idea how to get this back.

ITs fine in Detail, or list view, just thumbnail view

Thanks

Dave
 

More replies
Relevance 49.2%

Unfortunately I am unable to print anything at present as for some reason my printer details have disappeared from the Printers and Faxes File in the start menu. If I try to reinstall my printer by clicking on "Add a printer" I get the message "Operation could not be completed. The print spooler service is not running."Has anyone any ideas on what I should do PLEASE?????Many thanks in Advance.

Answer:Printer details missing and unable to reinstall

Is the printer usb or other connection? Click on an empty part of desktop, press F1 and type print spooler in the search box then look at some of the links

4 more replies
Relevance 49.2%

I have this problem with the vista details pane and I have not been able to find any solution. I have Windows Vista 32 bit Home Premium version. The problem is that:
1. My details pane is missing a lot of properties/tags . Only ones that are appearing are file date, file name, dated created.
2. When I go into a MP3 folder, same thing happens as I described in 1. Just the 4 tags appear and I don?t get any other tags that used to be there like artist name, rating, title, etc.
3. I cannot edit any Tag in the details pane. When everthing was working fine, I could go in the MP3 folder , I could edit the title, ratings etc. and Save it. But now I can?t do anything, the save button does not appear and the tags don?t go in edit mode.
Up till now I have tried the following solutions:
1. I have reset all the folder options in Vista by going to Folders/tools/reset defaults. (did not work)
2. After resetting the folders, I have also turned on the details pane option under Organize/Layout and the details under the Views. (did not work)
3. Under View, in the tool bar, I went to Customize This Folder and chose the Music Folder Option, All Items etc. (did not work)
4. Then on the Microsoft site, I found this solution ? Open Documents by clicking the Start button , and then clicking Documents., and click a file to apply properties. Then In the Details pane at the bottom of the folder window, click the property that you want to change, type the new property in the Tags.? But it did not work ei... Read more

Answer:Missing Properties/Tags in Details Pane

hello

Is this only for mp3 files?

You said "when everything was working fine" what happened? did you download a new program? (itunes,vlc)

If it wasn't that long ago, you could try system restore.

Did you use a "registry cleaner" or an "optimizer"?

On the properties window, general tab, what is it set to "open with"?

good luck

15 more replies
Relevance 49.2%

When open WE, cant get 'In Folder' to show in 'details' bar as it does in Search Companion (srcnshot attached).
Seems to have disappeared after having some 'legacy' registry problems, working with Mbam.
Have tried doing an XP-SP2 repair (along with SP3 update) install, but not luck.
Thoughts ?
 

Answer:Windows Explorer 'In Folder' missing from 'details' bar ?

Did you try going to the View Menu and select Details?
 

4 more replies
Relevance 48.79%

I recently used IOBit uninstaller to remove all traces of a program from the registry. I'm assuming it removed something that caused this issue, because after I used it all my program information in Add/Remove programs was missing. However, other users on my PC show all information in Add/Remove programs. Is there a way to repopulate this or would I have to create a new user? Thank you

Answer:Missing Program information/details in Add/Remove programs

Use a restore point before this happened.

5 more replies
Relevance 48.79%

I have a Lumia Icon and vcards sent to me via text do not come through with all of the contact info that is sent. I've had several iphone users that I know try it and some info comes through but not all. Typically email addresses and street addresses don't come through. Why doesn't this work and will the WP 8.1 /Denim update fix it? I run a business and I need this functionality to work correctly. It's embarrassing to ask someone to email a contact because my phone can't recognize it. I love Windows Phone, but my business can't suffer because of it. Anyone else have this issue? I'm seriously thinking about returning my new Icon for a Droid Turbo or iPhone because of this.

Answer:Why am I missing contact details when receiving contacts thru text/SMS?

If a drawback in your phone affects your business then its better returning it and getting what works best for you

2 more replies
Relevance 47.97%

I just noticed that there are few battery information missing in Lenovo Companion.It shows status, remaining %, capacity, voltage, charging cycles yet not showing wattage, temp, manufacturer date and first date used is it as it should be or am i missing something?





Y3i7

More replies
Relevance 47.56%

Hi,

I am getting this error while I was able to connect to same network in the morning.
Issue seems to be with default gateway / DHCP even though ipv4 & ipv6 are set to dynamic. Below are ipconfig log:
Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : mshome.net
Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
Physical Address. . . . . . . . . : 08-ED-B9-99-64-39
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a5fb:486d:183b:3166%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.137.247(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, 11 June, 2014 2:27:40 AM
Lease Expires . . . . . . . . . . : Wednesday, 18 June, 2014 2:47:39 AM
Default Gateway . . . . . . . . . : fe80::225:5eff:fe8d:581c%13
192.168.137.1
DNS Servers . . . . . . . . . . . : 192.168.137.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Please please help.
 

Answer:Cannot connect to internet by wireless: DHCP server details missing in ipconfig

9 more replies
Relevance 47.56%

Hi, got a message yesterday on my windows 8.1 laptop saying my windows is expiring in a couple of weeks and I need to put in a product key to renew it. So I found my product key and put i tin and it won't work? It says it can't be accepted and to use another one?It was originally a windows 8 but I did the update to make it an 8.1.Anyone able to help?   Also where can I find the details to my laptop? Like serial number and stuff? There isn't a sticker underneath.

Answer:Problems with Y510P, windows expiring and won't accept product key, plus missing details.

It should not be asking for a Windows key if it was ONLY an update from Windows 8 to 8.1 Did you change the HDD, modified BIOS or installed 8.1 differently than going into "Update & Recovery"? Your Serial Number and Model No should be on the Invoice which Lenovo sent you.It should also be in the Final order email and the Lenovo Order Status on the website. Note it down, since I also couldn't find it on my laptop as a sticker.

6 more replies
Relevance 47.56%

I googled the problem and NOTHING!!!!! many information NO LONGER is displayed in my details pane in Windows Explorer!!!!!! song length is one of them gone missing (& total length if multiple files are selected) and I use that frequently!!!!! it ONLY shows basic information now such as artist, title, album, and genre!!! but total length is GONE!!! also MANY UNRELATED INFORMATION is now in the details pane for media files!!!!!!! mood of music has been added (never heard of that tag), song rating, and composer now have been added!!!! it even displays ALL THIS SAME INFORMATION for WAV files when it used to be ONLY file size and length for WAV files!!!!!!! WAV is NOT capable of tags so I don't know why Windows Explorer shows this information for WAV files!!!!!!
 
HOW DO I GET MY DETAILS PANE BACK TO NORMAL???????

Answer:missing information in details pane for media files (such as song length)

Can you post a screen shot of what you are seeing?

12 more replies
Relevance 45.92%

I have filled in the wrong details setting up my internet details, can I clear and start again

More replies
Relevance 45.51%

How can I re-associate .mp4 files with video details displaying in the Details Pane? After installing the K-lite codecs pack, my mp4's all began displaying in the details pane as audio files (Album, Artist etc) and no longer displays the important video default details (size, frame height, bitrate etc). I assume it was because of incorrectly associating file types when installing the codecs (even though wmv's, avi's are still correct), so I uninstalled the codecs but the Details categories remain for typical audio files. I've exhausted The Google and I'm stumped... any help? (Win7, 32-bit with VLC as my default player) Thanks!

Answer:Details Pane associating mp4 video files with audio details

Have you tried resetting your Folder Templates?

Tutorial
Folder Template - Default

5 more replies
Relevance 45.1%

the laptop is a Dell Inspiron 15–5559. The white LED blinks 4 times then the orange blinks twice.
Sometimes it works, but after the first time it started up it barely ever works.
I tried starting it with the battery, without it, with the cord, and without that.
What’s going on, and how can I fix it?

More replies
Relevance 45.1%

I need a little help with something that seems simple. I am using Windows 7 Enterprise 64-bit. I have changed the columns in Details view in a folder. However Windows is not populating those columns, so what am I missing? This holds true on both my network drives and my local drives, so I checked my indexing options and they are set to index my local drives, so I assumed that should have at least worked. Any help would be very much appreciated.

Answer:Windows 7 Details View not showing details/data

Welcome to Seven Forums JLH1. Try this:

Right click an empty area in that folder> Sort by> More

Scroll down the list and make sure the categories you want are checked> OK

A Guy

5 more replies
Relevance 45.1%

For Windows 7, is there a list of the 'Details' available in the Windows Explorer folder view called 'Details' which has an explanation for each of them? Most of them are simple but some leave me scratching my head.

Answer:explanation of 'Details' in Windows Explorer 'Details' view

The "Details" which are available are those you see when a list of files is in "Details" view (as opposed to "Icons" or "Tiles" views.In "Details" view, depending on which column categories you have enabled, you are shown such things as filesize, file-date, filetype etc. If you then right-click any column header, you can choose to hide or show more information columns.I can't see how any of that can leave you scratching your head as it's no different to previous versions of Windows in that respect.

3 more replies
Relevance 43.87%

The "Details" option in the file menu format (on both Word and Excel) does not any longer display the date and time of the last file update. I have a Windows XP Home Version. Got any tips on how to restore this data? Thanks. --Jazzguy
 

Answer:Missing "Details" in Word & Excel file menu

6 more replies
Relevance 42.64%

Hi,I'm using Windows 7 Professional x64. When I use Windows Explorer to view image files (jpg, png, etc.), I would like to see each image's dimensions listed in the Details Pane (when it's set to view the images as Icons/Thumbnails, rather than Details). However, the only details that show up in the Details Pane are Name, Type, Date Created, Date Modified, and Size. This is the case even though:* I've checked 'Dimensions' in the 'Choose Details' options* The folder is already categorized/optimized for 'Pictures'* Other folders show the other details I want -- i.e., the Details Pane for my 'Videos' folder shows Length, Frame Width, Frame Height, and other details that I've chosenAny suggestions are appreciated. Thanks.

Answer:Need more details in W7 Explorer Details Pane

I think you are asking Windows Explorer to do more than it is intended to do.Try using infranview to view the folder. Get infranview at the link below.http://www.irfanview.com/

3 more replies
Relevance 39.36%

Hi,

I'm using Windows 7 Professional x64. When I use Windows Explorer to view image files (jpg, png, etc.), I would like to see each image's dimensions listed in the Details Pane (when it's set to view the images as Icons/Thumbnails, rather than Details). However, the only details that show up in the Details Pane are Name, Type, Date Created, Date Modified, and Size. This is the case even though:

* I've checked 'Dimensions' in the 'Choose Details' options
* The folder is already categorized/optimized for 'Pictures'
* Other folders show the other details I want -- i.e., the Details Pane for my 'Videos' folder shows Length, Frame Width, Frame Height, and other details that I've chosen

Any suggestions are appreciated. Thanks.

 

Answer:Need for details in Details Pane

16 more replies
Relevance 33.62%

I have a computer where the DHCP service will not start due to a missing dependent service.  I did some digging and found that the NetBT.sys file was missing, as well as the related Registry keys and the NetBIOS over TCP/IP service in Device Manager.
 I tried copying the NetBT.sys file over from a known good XP SP3 machine, but before I went any further, I wanted to make sure I wasn't missing anything.  Can someone offer some suggestions to fix this without having to reload XP?
 
Thanks,
Phil

Answer:NetBT.sys missing, registry entries missing, and NetBIOS over TCP/IP service missing from Device Manager

For what it is worth, I pulled the netbt.sys file from a known good machine and putting it into the %Windows%\system32\drivers folder, then imported the registry keys for NetBT from the same machine.  Rebooted the computer and the "NetBIOS over TCP
IP" driver showed up in Device manager under "Non Plug-and-Play Devices".  It showed that it was started, and verified that the DHCP client server was started as well.  Everything was in good working order at that point.  Here are the registry
keys:
 

Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
"Type"=dword:00000001
"Start"=dword:00000001
"ErrorControl"=dword:00000001
"Tag"=dword:00000005
"ImagePath"=hex
 
(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
 
 
52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e
 
,\
  00,73,00,79,00,73,00,00,00
"DisplayName"="NetBios over Tcpip"
"Group"="PNP_TDI"
"DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"DependOnGroup"=hex(7):00,00
"Description"="NetBios over Tcpip"
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
"OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"Bind"=hex
 
... Read more

7 more replies
Relevance 31.57%

I want all information regarding1. ADF Scanner with multipage feature.2. Also any device having OMR scanning feature  for exam sheet.3. OMR Software.  Thanks

More replies
Relevance 31.57%

When I click in HELP/ABOUT in IE 9 I get the following:-

"IE9 v.9.0.8112.16421
Product ID 03553-112-5462972-85083"

Do I have 64bit version ?

Answer:IE Help/About - Details - Is this 64-bit?

Short answer: No.

If Microsoft kept it the same as IE8, the bit version will be listed on the same line, and to the right of the IE version.

So in your case it would read, Version: 9.0.8112.16421 64-bit Edition.
Since you do not show that extra information I would say you have the 32-bit Edition installed.

You can, if you want to install the 64x edition, go to Internet Explorer - Web Browser for Microsoft Windows Open the Select your version drop down box, there you will see the option to select either the 32 or 64 bit versions, select the 64bit and download that.

4 more replies
Relevance 31.57%
Question: My Details

Windows Server 2003
 

Answer:My Details

pHHFFF,

Thats so 2003, GET WITH THE TIMES!!!.

Windows 2007...
 

1 more replies
Relevance 31.57%

I have NT4.0 sp6I would like to get a brief report which tells me MotherboardBIOS usedCPU typeAmount of RAMHard disk sizeDetails of all cards on my BUS (network card, sound card etc)Short precis about the drivers the above cards useis there a utility that will do this without swamping me a with all the minor detail?

Answer:Getting details about your PC

click hereclick hereEither will do but Aida is more comprehensive

1 more replies
Relevance 31.57%
Question: Need details

Hai,One of my cust'r using Trend Micro oficescan AVIn that What is ENG/PTN & DCE/DCT pl give details briefly,If it is updated which file I have to check for Latest Update Ver.?Thanks in Advance... 8-)

Answer:Need details

HuH ? ?

4 more replies
Relevance 31.57%
Question: HJT log (details)?

I recently just got rid of a few viruses on my computer, they took away my toolbar at the bottom of my screen, took away my icons, changed my desktop to a web page or something? I got rid that problem, but now the only thing that I can see wrong is my icons have a white background behind the text. Apparently this is a virus? I tried using Windows Live OneCare program, found it to be the most useless thing ever. Then I downloaded AVG Anti-Virus free, which seemed to fix everything. I'm not exactly sure how to use HijackThis and I don't want to delete anything important. Anyway, here is my log. I would appreciate anyones help!


Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:44:16 AM, on 5/23/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Adobe\Photoshop Elements 4.0\apdproxy.exe
C:\Program Files\HP\HP Software Update\HPWuSchd... Read more

More replies
Relevance 31.57%
Question: Details

I buy new hp laptoopmodel no. -hp 15 ay 019yus.n. - CND6192HXBproduct - WCT33PA#ACJPLEASE SIR/ MA'AM give me this item all details 

Answer:Details

Hi, It actually is an HP Notebook - 15-ay019tu  and the following link shows its specs:             http://support.hp.com/za-en/product/hp-15-ay000-notebook-pc-series/10862300/document/c05138547 and please bookmark the following link (parts list) for future references.           http://partsurfer.hp.com/Search.aspx?SearchText=W6T33PA Regards,  

1 more replies
Relevance 31.57%

so-called AVG 'user interface' element:mfc110u.d11 appears on screen in a message to say AVG user interface will not open because this element is missing..... how do I correct this error - or re-install the whole necessary software?? thanks..

Answer:see details all in brief...

I think it's a quick solution to try re-installing the software. If the problem persists, there might be a malware and you can check your system using Farbar Recovery Scan Tool:http://www.bleepingcomputer.com/dow...message edited by TeslaAC

4 more replies
Relevance 31.57%
Question: Details of an MSI

Hi all,

Could you guys check whether you can see the details/properties of an MSI on right-clicking? Properties like ProductName, Description, Manafacturer, etc.

The problem is I can see these properties in some other OS'es like XP/Windows 7, but for same MSI I can't see in Vista/Server 2008. I tried upgrading my Windows Installer from 4.0 to 4.5, but still the issue is not resolved. Also tried disabling UAC. That didn't work either. I upgraded Windows Installer from 3.x to V 4.5 in one of my XP machines.. and I can still see the details there. So, this is not a Windows Installer 4.x issue.

I had also checked the MSI in Orca, and I can see the property fields there. Could someone help me regarding this?

Thanks.

Answer:Details of an MSI

Yes I can see into the properties page of a MSI

1 more replies
Relevance 31.57%
Question: more details

when i start my computer i usually hear the start windows music and the log off music also when i get new e.mail from msn messenger theres no new e.mail message music ether i,ve lost these sounds and music what do i have to do to get them back, please help me get this problem sorted out
 

Answer:more details

Have you gone to Contol Panel -> Sounds?
 

2 more replies
Relevance 31.57%

I have installed Windows 10 Mobilde build 10581. I am trying to receive MMS, but not able to. Then I am trying to find the APN setting, but that is not vissible. Where could it be? How could I find it?
In my Settings->Network&Wireless->Cellular&SIM->SIM-Advanced setting there is no link for APN setting. Any idea where to find these settings?

Answer:Why isn't possible to set APN details?

I don't have a Sim Advanced option, but have the following on my 10581 920 to change APN settings:
Settings > Network & Wireless > Cellular & Sim > SIM Settings

3 more replies
Relevance 31.57%

Hello,
I am having multiple problems with my computer. I am having freezes and blue screens . mcaffee scanned fine but i uninstalled it for now, have also run AVG and spybot, malaware no problems.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:51:18 PM, on 10/18/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16915)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\CTsvcCDA.exe
C:\Program Files\Intel\Intel Application Accelerator\iaantmon.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Tablet.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Intel Application Accelerator\iaanotif.exe
C:\Program Files\CyberLink\PowerDVD\DVDLauncher.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Creative\SBAudigy2\Surround Mixer\CTSysVol.exe
C:\Program Files\Creative\SBAudigy2\DVDAudio\CTDVDDet.EXE
C:\WINDOWS\system32\CTHELPER.EXE
C:\Progra... Read more

More replies
Relevance 31.57%

Hi all, hijack this log below, please help.

Details:

Pop up box continuously appears, the title bar says 'WARNING!', the message says 'Attention! System detected a potential hazard (Trojan SPM/LX) on your computer that may infect executable files. Your private information and PC safety is at risk. To get rid of unwanted spyware and keep your computer safe you need update your current security software. Click OK to download official intrusion detection system (IDS software)'

Some software called 'Internet security 2010' constantly pops up warning boxes saying 'user activity loggers detected' prompting me to either 'allow' or ''

Another pop up constantly appear saying 'Critical vunerables found', prompting me to 'Remove threats' or 'Ignore'.

Thanks for any help in advance guys,

Adam
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:05:34, on 24/12/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Samsung\FrameManager\sam_service.exe
C:\Program Files\Samsung\FrameManager\sam_controller.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.ex... Read more

Answer:HJT log and details...

8 more replies
Relevance 31.57%
Question: GPU details

Hi, is there a program that tells me all the details of my graphics card, like how many ROPs, pixel pipes etc. it has? Bought myself the Gainward GeForce 7800GS with 20 pixel pipes, and would just like to confirm that they really are all there! Cheers guys and gals

Answer:GPU details

see if you can use CPU-Z or Everest.

1 more replies
Relevance 31.57%
Question: PC Details

Hi i have a DELL Dimension 4550 and i want to know what size of graphics card it has can anyone tel me were to go or give me a link to some softwear that tells me.Thanxschaztait

Answer:PC Details

click here or look in your system settings depending on your os which you have not stated.johnny.

10 more replies
Relevance 31.57%
Question: details + HJT Log

Hey! my computer is running really slow lately.. internet sometimes doesnt even load and sometimes the internet doesnt even work at all when connected.. yesterday it changed my wallpaper to "this system is infected dont use this pc etc" but i used super anti spyware and it got rid of the wallpaper warning but the internet is still very slow and sumtimes doesnt work also its started to crash lately.. im having so many popups appear also mainly anti virus ones etc

thanks for reading hope to hear from you soon really need some help =)

Log attached

AJ
 

More replies
Relevance 31.57%

hihere is my problemabout 2 weeks ago my windows 7 ultimate 32 started slowing down and crashing and stuff like that so i reinstalled it -clean install,deleted the partition made a new one and formated it - and the os that i installed was the same windows 7 ultimate 32 but to my surprise i started getting that annoying 100% cpu thing -dont know what it is to this date i mean in xp i though it was a bug but on 7 dont know- anyway i though that the dvd was broken or something or maybe when i was installing my progs i got i virus -though i always install my graphic drivers first then kaspersky internet security latest vir - anway i reinstalled the same 7 from another dvd but still whenever i try to play a game or sometimes when i am browsing the pc gets really slow so i installed windows xp -clean install like i always do- but i still got that problem and to make a long story short i tried a couple other virs of windows xp all clean install but still i had that problem so i though maybe i got a malware on all of my programs and os sources on my computer so i got windows 7 ultimate 32 sp1 and installed -obviously not from some1 not trusted -andway i installed cleanly then installed my graphic drivers and kaspersky internet sec 11 like a always do then installed daemon tools and fallout 3 and tried playing fallout 3 but could not due to slowframe rate and cpu going to 100% and freezing for a couple of seconds -no my pc can run it i checked + i played it for a month on high quali... Read more

Answer:a lot of details just need help please

so you have the valid windows key installed?Some HELP in posting on Computing.net plus free progs and instructions 7 Medals

9 more replies
Relevance 31.57%
Question: CD Details

ok guys, lets say I have this CD with me (with a few videos or pictures or something) in it, and I want to find out the details of that CD. What I mean is, under what user name is was burnt, and other details like that as much as possible of it,
how can I do that?

Answer:CD Details

browse the cd if the information is not there you cannot

3 more replies
Relevance 31.57%

Hi im about to buy a new genuine vista ultimate pack from someone...

after doing some research ive found out that there are two types of vista ultimate on sale... one is vista ultimate [ultimate] (expensive) and the other is vista ultimate [OEM] (cheap) ...

the problem is.. what are the differences between these two ultimates? and how can i know that the vista im about to buy is [OEM] or [Ultimate].. im suppose that the [ultimate] ver should be much better than the [oem] as the higher the price is the better will be the quality...

so im about to get some guidelines from u experts here regarding this.. please provide me some details so that im not lost or being fooled.. thanx in advance..

Answer:Need more details...

oem and retail version are basically the same. The big difference is oem is only for a newly built computer that never had an operating system installed on it. It falls under the system builders eula.

5 more replies
Relevance 31.57%
Question: Ink cart details

(This question is about curiosity, not need. Someone here suggested a completely different solution that I am pursuing.)

While searching for info on ink for my Epson Artisan 710 I came to the conclusion that there was a definite difference between the T098 series and other 9 pin cartridges. None of the resetters available for 9 pin carts listed the T0988's or T099's.

Then I found one company that insisted by email that their resetter could reset ALL 7 and 9 pin chips for Epson, even though they do not specifically list the T098 I was interested in.

Frankly it sounds like whistling in the dark to me.

Does anyone here know enough about these relatively new chips to give me a definitive answer about this? Or a reliable source that has this specific information? (I even read on one site that they self-destruct when they report that there is no more ink in the cartridge. That's another single source tidbit.)
 

Answer:Ink cart details

Here's a search link on eBay that may help you out:

http://computers.shop.ebay.com/Prin...w=T098&_catref=1&_fln=1&_trksid=p3286.c0.m282

Based on this link it appears several eBay stores have aftermarket ink available with the chips installed. Since the aftermarket ink is about two-thirds less than OEM, it's worth a try.

If going the eBay route:


Check the seller's feedback level. Anything above 98% with several hundred or more feedbacks is usually safe.
Read the item listing carefully to be sure your specific model is listed.
Stick with US sellers. Items shipping from China or Hong Kong take forever to arrive and cost a fortune to return if defective.
Be sure the seller has a reasonable return policy in case the item doesn't work well with your printer.
Don't mess with refill kits - they're messy and may not reset the chips.

Hope this saves you some $$$.
 

1 more replies
Relevance 31.57%

Hey there,
I was running onto some Program Editing, and i say that the program wouldn't name the item for its name but for his Description.

And i also noticed that the description is only there to see.
I don't see how to edit that description.

Please, help, i can't no further edit because of this little glitch.

Offtopic: Glitch means Little Problem right?
Thanks,
Alex.

There goes an image:

Answer:How do i change .Exe Details?

Those details are compiled into the exe and you can't change them.

Most coders are lazy and merely put the app name into the description field. In fact I think MSDEV puts that there by default and no one bothers to change it. If you want to add your own comments or other details on the file, use the "Details" tab to do so.

[Edit] Ooops, did you mean you ARE coding and you can't chage the description field in your program resources and have it show up there?

3 more replies
Relevance 31.57%
Question: Details and List

hi.
first sorry for bad english!

when i open the windowes , it shown on "Details" but i want windows open on "List".
how can i change my view , Details to List forever?

Answer:Details and List

  
Quote: Originally Posted by sdotstar


hi.
first sorry for bad english!

when i open the windowes , it shown on "Details" but i want windows open on "List".
how can i change my view , Details to List forever?


Get a folder looking the way you want it. On the Menu Bar (press ALT if you don't see the menu).

File and Folder Arrangement - Change in Windows Explorer Window

Tools
Folder Options
View
Apply To All Folders

2 more replies
Relevance 31.57%

Thank you to 'elf' for his advice in another forum regarding my earlier problem and to whoever is able to give their valuable time in looking into the problems I am having.

Please find the contents of the 'DDS.txt' log below and the contents of 'attach.txt' and 'ark.txt' attached as specified in the 'First Steps' instructions, which have been invaluable.

The details.... I first noticed a problem when I started getting redirected to other websites when searching on Google. I tried to sort the problem myself by loading Norton 360 but it soon became apparent that it hadn't loaded correctly as it wouldn't update or connect to the internet, and I soon realised that it wasn't virus protection that I needed, but virus removal! I have tried (and I must apologise for this!) many different ways of removing the virus / malware or whatever it is as I wasn't aware of helpful websites such as this. I tried loading AVG but again that wouldn't update, and it soon became apparent that the problems were getting worse as I couldn't connect to other websites. I have a work computer (this one) right next to the infected computer and have tried downloading Stinger, bitdefender, Malwarebytes, Superantispyware.... etc etc onto a USB stick and transferring them over to the other computer as I couldn't log on to the relevant websites through the infected computer to download them, but few of them ran, and even if they did they couldn't find and destroy what has infected the computer. I tried to... Read more

Answer:'First Steps' details - help!

BUMP PLEASE :o)

19 more replies
Relevance 31.57%

I am wondering if there is a way to enable the Status Bar at the bottom of the Explorer window to give the details when selecting more than 15 items in a folder? It works great up to 15 items, but I am often selecting more than 15 items...

This was something I came to rely on in XP and am disappointed to see it gone from W7. Is there a 'switch' somewhere that I haven't been able to locate?

Thanks in advance.

Answer:Getting More Details in Explorer?

Do you not get the option 'Show More Items'?



Regards,
JDobbsy1987

2 more replies
Relevance 31.57%

Evening folks,

For some reason my Windows 7 Home keeps putting all my folders in to detail view and its currently annoying the hell out of me. I wouldn't mind if it remebered the size I put colums but it forgets it so I can see the names of anything.

How do I make my folder view settings stick?

I like icon or thumbnail view for most things but this constant changing to details view is annoying as (insert expletive of your choice).

Anyway, any advice?

Answer:Always with the Details view?

  
Quote: Originally Posted by BigAdam


Evening folks,

For some reason my Windows 7 Home keeps putting all my folders in to detail view and its currently annoying the hell out of me. I wouldn't mind if it remebered the size I put colums but it forgets it so I can see the names of anything.

How do I make my folder view settings stick?

I like icon or thumbnail view for most things but this constant changing to details view is annoying as (insert expletive of your choice).

Anyway, any advice?



Try this:

http://www.sevenforums.com/tutorials...l-folders.htmlCustomize you folder the way you like, including view style (Right-click->Customize this Folder), columns, etc
Click Organize, in the top left of the Explorer window
Click Folder And Search Options
Click the View tab to open it
Click Apply to Folders
Click Yes in the message box Do you want all folders of this type to match this folders view settings?
Click OK

3 more replies
Relevance 31.57%
Question: diagram/details

need diagram/details for unknown m/board AA 635639 as found in a "gateway 2000" machine
 

Answer:diagram/details

Welcome to MG
Do you see any P/N, S/N, model on mobo,.......
you can run Sisoftsandra for testing model of mobo
 

3 more replies
Relevance 31.57%

How do I delete my details (which were entered when my pc was new) from being inserted automatically onto each new program I install?.

Answer:Name Details on programs

hello freshui free from fresh devices has an option to do this tweakui might allso.

1 more replies
Relevance 31.57%

Hi firstly thanks for this forum and the opportunity to post.
The problems all started with being google redirected not to sure if I have removed the problem or added further issues. Grateful for any help and advice.

Danny

ComboFix 10-08-03.04 - danny 04/08/2010 15:28:11.1.2 - x86
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.44.1033.18.2038.894 [GMT 1:00]
Running from: c:\users\danny\Downloads\ComboFix.exe
SP: CA AntiSpyware *enabled* (Updated) {6B98D35F-BB76-41C0-876B-A50645ED099A}
SP: SUPERAntiSpyware *enabled* (Updated) {222A897C-5018-402e-943F-7E7AC8560DA7}
SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}
.

((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
.

c:\users\danny\AppData\Local\{873E1552-D424-4BF4-B29E-8DAC35E8038F}
c:\users\danny\AppData\Local\{873E1552-D424-4BF4-B29E-8DAC35E8038F}\chrome.manifest
c:\users\danny\AppData\Local\{873E1552-D424-4BF4-B29E-8DAC35E8038F}\chrome\content\_cfg.js
c:\users\danny\AppData\Local\{873E1552-D424-4BF4-B29E-8DAC35E8038F}\chrome\content\overlay.xul
c:\users\danny\AppData\Local\{873E1552-D424-4BF4-B29E-8DAC35E8038F}\install.rdf
c:\windows\system32\%appdata%
c:\windows\system32\system

.
((((((((((((((((((((((((( Files Created from 2010-07-04 to 2010-08-04 )))))))))))))))))))))))))))))))
.

2010-08-04 14:39 . 2010-08-04 14:39 -------- d-----w- c:\users\Default\AppData\Local\temp
2010-08-04 11:0... Read more

Answer:Help please log details posted

Hello newbie34,

Do you still require assistance?

1 more replies
Relevance 31.57%

Hi there,I have an old SR-M504 MB that I am sorting for a friend.It has a plug for USB on it, but the lead that I bought to plug into it is incorrectly wired. I am trying to find the connection wiring for USB plugs and leads, as I don't want to do it by trial and error and kill things off! CheersKeith

Answer:USB - where can I get connection details?

have a read hereclick here

3 more replies
Relevance 31.57%

This i believe is a virtual system rootkit. Problem is that i keep formatting / reinstalling and it comes right back.. i need help to clean, not to format. please, thanks

More replies
Relevance 31.57%

Half an hour ago, searching the forum, I found some advice on copying ISP details and settings from one computer to another.The advice then was to copy using a floppy disc.Unfortunately when searching again, the same thread did not come up, and I can't find it anywhere.Any Advice on that one Please ?RegardsBlott

Answer:Transferring ISP Details

click here

2 more replies
Relevance 31.57%

Hello!

The question is... Several people I talked to, says it's possible to use my Full Tower AT case and convert everything to ATX .......Has anyone ever done this successfully? Any encouraging words? (they say to pitch the AT case and go buy an ATX...etc...etc The Full towers I have seen that I would want cost around $250) :-\

Love a Challenge! ;->

OLD STUFF:
Case: AT FULL Tower
145W PSU
Gateway P5 ( Socket 5)
"Intel Inside"
Modem
Video Card
Sound Card
(that's all I know on that)
NEW STUFF FOR UPGRADE/NEW BUILD:

SAME GATEWAY CASE
550W new ATX PSU
New ATX case Power switch
New Case Fans (2 - 80X80)
Gateway INTEL P-3 Socket 370 Motherboard
1Ghz INTEL Celeron 370 CPU w/ INTEL Heatsink & Fan
128MB SDRam
ASUS V6600 Graphics card
SoundBlaster Sound card (MoBo also has integrated sound)
V.90 or V.92 56K Fax/Voice modem
(+/-)etc.
 

Answer:AT to ATX Upgrade ...Details

14 more replies
Relevance 31.57%
Question: usb board details

gday-can-you-help-with-details-of-an-add-on-usb-board-so-i-can-find-and-order-one-as-i-need-it-to-connect-a-new-usb-only-scanner--thanks-ray
 

Answer:usb board details

What usb card do you need? If you need a USB port , cuz the computer doesn't has one , then choose any USB add-on card that has drivers for windows or whatever operating system you are running ...
 

1 more replies
Relevance 31.57%

where do I look to find the RAM details on both my main and my lap top computer please...full pathway appreciated....am in winn 98se with main and lap top (if that makes any difference)

Answer:finding RAM details

click hereBelarc click here#Aida32 Either of these two programs should do it for you.

10 more replies
Relevance 31.57%
Question: Hardware details

So I came across an old desktop pc in a garagesale today. Just about 50$ with 24" screen and relatively new wireless keyboard and mouse from logitech. A bargain I thought. Got it home, recovered it and want to know what makes it tick. Read a little online here about specs, but it doesn't say if it's a 64bit or 32bit system. While it says 1GB max memory(and 1gig it has)it has 4 slots and should be capable of reading at least 2GB memory with a 32bit system(which I suspect it is).Can someone give me some hard answers and maybe I could save this oldtimer and give it new life as a media presenter for my flat screen :-)










Solved!
View Solution.

Answer:Hardware details

Hi, It is around 12-13 years old now. Not much information you can find. The following specs should be good enough:     http://www.cnet.com/au/products/hp-compaq-presario-sr1000/specs/ Yes, it only a 32bit machine (very hard to find 64 bit machine 12 years ago). The following statment confirm this:    Downside: Since the SR1000 line is targeted at mainstream users, you won't see configuration options for a second hard drive or the latest-and-greatest graphics card. Also, while some of AMD's faster Athlon 64 processors have trickled down into the mainstream, HP offers only the 32-bit Athlon XP chips on SR1000Z models. Your choices for bundling a monitor are similarly limited, with neither LCDs nor CRTs available in screen sizes larger than 17 inches. I would not spend more money to upgrade this machine specially for flat screen presentation.  Keep the keyboard and monitor then chuck it to a bin. Regards.

3 more replies
Relevance 31.57%
Question: ordering details

I typed all the correct information in when i was ordering software to repair my pc now i checked there information and some how the citiy has been changed  to seattle wasington with my zip code I have tryed to contact shipping to correct address I can not figure it out.Is there some one that can help get the wright info to them.[Personal Information Removed]....thanks










Solved!
View Solution.

Answer:ordering details

@mike901

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

 

Thank you for visiting the HP Support Forum.

2 more replies
Relevance 31.57%

Cant get folders to always open in Details. I also have not
been able to show file extensions! I miss the simple ways of
Win 95 when it comes to many UI options. I hate the panel at left of most folder views , that you have to get rid of to see
tree listings. Search Files is an abomination , which reminds me
I need to get Agent Ransack on this computer.

Answer:DETAILS..Please!! XP Folders

Hi Lew,,

try this,,

Just open explorer then set one folder as you like it then choose tools/folder
options/view then select apply to all folders..

cheers

1 more replies
Relevance 31.57%

Hi,

I have installed some 3rd party software for email messaging and it requires SMTP details. I hardly even know what SMTP is. Via google I found one it has something to do with server for sending email messages but I don't want to use SMTP of my ISP which is (referring to smtp and not isp) the one that is being used in microsoft outlook program. But the 3rd party software is different one. It requires FIVE (5) datas and I have no idea how do I find them out:

email
server name
password
username
port

I have been searching for some smtp details what to type with the following requirements:

- smtp must be free to have and use details
- working one
- as fast as possible
- no particular limits

The program also offers to set up ''in-build'' smtp server. If I choose this it works but the message cannot be sent for unknown reason. I don't have firewall and I double checked nothing is wrong with avast antivirus. So I will have to get the smtp details with mentoined four requirements. Don't even know where to search. I found some freeware smtp (or virtual smtp) applications but I need 5 datas to type in and not an application. No idea where to get them. I tried gmal (server: smtp.gmail.com) but its not working, been trying also different ports. Anyone knows where could I get the datas? I don't know much about smtp so I would need some detail answer. Would appreciate it.
 

Answer:How to set up ''SMTP'' details?

16 more replies
Relevance 31.57%
Question: modem details

Right now I am having BSNL broadband]connection to my DESKTOP (windows xp). Now, I purchased a LAPTOP (windows 8) and I like to have a modem which supports both DESKTOP & LAPTOP. Which modem and router will helps me to connect my DESKTOP & WIRELESS CONNECTION TO LAPTOP?
 

Answer:modem details

moved to the networking forum

whats the make and model of the equipment provided by BSNL Broadband

I would have expected them to provide a modem or a modem/router combination for your service ?

or are you saying they have not supplied anything at all to connect to the internet with

BSNL provide a number of different services
http://www.bsnlteleservices.com/2012/07/bsnl-unlimited-broadband-internet-home_02.html

so we need to know which service you have subscribed to
 

2 more replies
Relevance 31.57%
Question: server details

I have just changed my I S P to btinternet.comas i have another computer i would like to set this up with Outlook Express ,how do i get to my server details i/e Pop 3 incoming and outgoing SMPT details.I believe the existing one is [email protected],but i am not sure

Answer:server details

POP3: mail.btconnect.comSMTP: smtp.btconnect.com

7 more replies
Relevance 31.57%

This is a general query and I am not asking for any confidential info.Has anyone experienced the following when signing on to Nationwide building society account :After signing on successfully, the system is supposed to ask you to confirm the Last sigon date & time BEFORE displaying your account details.However since last two days I am not asked to confirm the last signon date & time and the system goes straight to my account details.The Nationwide think something wrong with my system and suggested changing signon details which I have done but no joy.I am wondering if anyone out there has the same problem to confirm the problem is with Nationwide system.

Answer:Last sign on details

problem resolved.

3 more replies
Relevance 31.57%

AT present i have two components inside my p.c but dont have the drivers disc for them. Is there anyway i can find out the deatils of these components without opening up my p.c. This in turn should allow me to download the correct drivers for them. I have vista o.s

Answer:p.c component details

Use SIW click here

4 more replies
Relevance 31.57%
Question: Firewall details

Hi,
I placed a program on the allowed list for the Windows firewall, however I am confused about whether to check the private and/or public boxes.

I have read about this in the help section and still do not understand the safest thing to do. This is pc computer that is used solely in our home. We also have a wireless laptop but it is not connected to the home pc. ie via a network.

I running Windows 7 and IE10.

Any help is appreciated, thank you...
 

Answer:Firewall details

private box
 

1 more replies
Relevance 31.57%

1) about all of my components
2) gives me temps

thanks in advance! As a matter of fact, I believe HWMonitor Pro provides temperatures if I'm not mistaken so which program will give details about all of my components? Thanks!

Answer:Program that gives details....

Device manager...?
Everest used to be GREAT as it was once, a really long time ago FREE, but, not it's pay to use software.

4 more replies
Relevance 31.57%

yayy i've received everything for my comp in perf. condition except i'm still waiting for my psu and case from buy.com -____-

here is what USPS said:

The U.S. Postal Service was electronically notified by the shipper or shipping partner on March 03, 2005 to expect your package for mailing. Information, if available, is updated every evening. Please check again later.

Here is what happened earlier:

* PICKED UP BY SHIPPING PARTNER, March 02, 2005, 4:00 am, SANTA ANA, CA 92705

this is what APX (american package express) said:

Last known status: PREPARED FOR DISPATCH TO USPS
Activity
Event Date Event Time Event Description Scan Facility
03/01/05 04:02 PM PICKED UP BY SHIPPING PARTNER
03/02/05 06:43 AM ARRIVAL AT REGIONAL APX SORTATION CENTER Santa Fe Springs, CA
03/02/05 02:00 PM ELECTRONIC DATA ACCEPTED BY USPS
03/02/05 09:20 PM PREPARED FOR DISPATCH TO USPS Santa Fe Springs, CA

the estimated shipping date is

Estimated Delivery Date: 03/03/2005 to 03/07/2005

oh btw, i live around 15 miles away from santa fe springs (also, is the mail guy gonna deliver it or is it gonna be some bigger truck)

so when should i xpect to receive my package? thx

Answer:Shipping details - what does this mean?

Quote:




so when should i xpect to receive my package? thx




How about:


Quote:




Estimated Delivery Date: 03/03/2005 to 03/07/2005




Probably some time between now and then

4 more replies
Relevance 31.57%

Hi,
I'm in possession of an ip address, 172.17.0.1

I want to know its details like what type of device it represents,where is it located.

Can somebody help me on it?

Thanx.
 

Answer:Need details about an ip address

You can not search what type of device an IP is without trying to attack it. This IP is in the block owned by the Internet Assigned Numbers Authority, but at least from my location, all pings or tracerts time out, and eventually report Destination Host Uncreachable before they get to 172.17.0.1.

OrgName: Internet Assigned Numbers Authority
OrgID: IANA

NetRange: 172.16.0.0 - 172.31.255.255
CIDR: 172.16.0.0/12
NetName: IANA-BBLK-RESERVED
NetHandle: NET-172-16-0-0-1
Parent: NET-172-0-0-0-0
NetType: IANA Special Use
NameServer: BLACKHOLE-1.IANA.ORG
NameServer: BLACKHOLE-2.IANA.ORG
Comment: This block is reserved for special purposes.
Please see RFC 1918 for additional information.

RegDate: 1994-03-15
Updated: 2002-09-12

OrgTechHandle: IANA-ARIN
OrgTechName: Internet Corporation for Assigned Names and Number
OrgTechPhone: +1-310-823-9358
OrgTechEmail: [email protected]
 

1 more replies
Relevance 31.57%

ok. I currently have 64 mg in my Dell Dunebsion L600R. I have a HD, from a friend, 1083.8mb (which people on this board have told me is just over 1 gb)It is Western Digital 7200 RPM

I want to reformat the 64mg HD. I dont need to info on it or the OS. (currently running Win98) I want to install OS on the new 1 GB HD and make the old 64mg HD the slave. I am going to be installing advanced server (have 1 year trial copy and need to install on this computer.)

So, do i first fdisk the 64mg HD? I mean, in what order do i do all this? To my knowledge, the new 1GB HD isnt formated or partitioned. Please help me in the order of which i need to do this.

Thanks You!
 

Answer:Need details on replacing HD!!!!

10 more replies
Relevance 31.57%
Question: port no details

Hi,I am new to www, pl can U give me the details of ports like 2000there is prob of 'pl check or set internet explorer setting' to connect  172.17.16.23:2000pl tell me what is 2000 ?I need to give exact answer to my custmer for this regards,where I can get the securities details of web?Thanks in advance

Answer:port no details

The high range ports aren't reserved for a particular application, so you will find that several different services may use this port.  From my brief search, I found the following users of this port:ShixxNOTERemotelyAnywherePeer2Peer RadioCallbookplus a whole host of trojans.In future a Google search such as "port 2000" will turn up some answers for you.  And >here< is a particularly useful resource.

1 more replies
Relevance 31.57%
Question: System Details

At my school everything is managed by RM.
On the logon screen we have a little bar at the top that has some text (Dudley Grid for Learning) and then on the right there is info about the OS, connectivity and the PC name. There is also a more button- when this is clicked it brings up info about the PC.

What type of software is this?
Can i get it at home?
And if not could anyone make me something like it and advise me how to set it up?
Thanks,
Cal

Here is an image of the software (the bar at the top and the system details)

Answer:System Details

Do you want something like this:

Control panel>Administrative tools>System Information:

6 more replies
Relevance 31.57%

Hello Team,Somebody has change my motherboard while place for repairing. I have MAC address(78ACC04E4152) and want to know details like name of owner or city name at where it was used last time.Please provide details and help me.

More replies
Relevance 31.57%

i need to know the differences and similarities among windows 95,windows 2000 and windows xp based on the following aspect:
-features
-tools
-process management
-process scheduling
-memory management
-file management
-security & protection
i really hope that anyone whos expect in windows could kindly help me out,thankyou.
 

Answer:need help in details of windows

Welcome to the forum Poh

Well, it?s my opinion that 95 should not feature on the list and I would also leave off any 9x series of OS. None of them would meet the criteria of security & protection.

There is little to differentiate between 2000 & XP but XP has one edge over 2000 ? it can play more games. Win2000 is based on NT4 (they just changed the name) XP is NT5

Here are some facts that favour XP

I'll leave you with this quote...





Windows XP is the first ?personal? operating system Microsoft has come out with in quite a while that completely sheds the notoriously cantankerous Windows 95 code base. Based entirely on the Windows NT code, which was aimed at downtime-sensitive network applications right from the start, XP should reverse Windows? reputation for unreliability.

?They [Microsoft software engineers] have been working hard to improve reliability,? Laney reports. ?In the first three months I had the latest XP release, I had only on crash, and XP warned me about it ahead of time.?

It seems that Microsoft has worked very hard with third-party software and hardware vendors to make sure that anything that worked with Windows 95/98, as well as with NT/2000, will also work with Windows XP.Click to expand...

Mucks
 

3 more replies
Relevance 31.57%

Quote:




People have been waiting for the next-gen Ee PC since the first one hit the streets and by the looks of it should be worth the frustration. The latest info about the next Eee PC models paint a picture of a sub-1Kg sub-notebook (just like the first one) with a nice 8.9-inch screen and updated specs.

Likely powered by a single-core Intel Atom processor, the new Eee PCs will be numbered 900 and up and come with 1GB of DDR2 by default. The storage part is said to reach 12GB (solid state drive) while the price tags of the notebooks are set to be in and around 299 and 399 euros [or $600-800]. ETA for the Eee PC 2.0, late Q2 aka June.




Source

Answer:Revamped Eee PC Details

Extremely cool.

9 more replies
Relevance 31.57%

i wanted to uniquely identify a machine (personal computer). how can i get the unique details of a motherboard by using C language only?
Also what other unique hardware details can i get by using C language only?
thanks in advance!! c ya!!

More replies
Relevance 31.57%
Question: Server Details

I am not receiving or mailing out emails. Server Details indicates: "550 - Please configure your mail clinets to use authentication. I am at a lost. Can someone please direct me to where I should make these changes and I ThankYou for your assistance.
 

Answer:Server Details

It would help to know your OS and version numbers along with names of programs involved in your problem. Always better to post too many details than not enough.

Gosh...there are lots of email clients. What are you using?

sekirt
 

2 more replies
Relevance 31.57%
Question: Computer details

Have decided to get rid of my computer which runs Windows Vista so as to give all my spare time to learning all i can about Linux 'Mandriva Spring'. So does anyone know how to get rid of the computer owner details etc please. Thanks
 

Answer:Computer details

12 more replies
Relevance 31.57%
Question: View;Details

Is there a way to change the view in ALL folders to be details without going into each folder? Like a global setting or 'Apply to all Folders' setting? And while I'm at it, when I select Start, I dont see a 'Log Off' button only a 'Shut Down' button. Is there a way to get the 'Log Off' Button?

Thanks

Ray
 

Answer:View;Details

You don't say which OS you have...I assume its a Windows version...but it goes something like this...control panel/tools/folder options/view...look for the 'apply to all folders' button and make your selection. Your other issue I'm not sure about..XP users should have the log off button beside the shutdown command when clicking the start menu.
 

3 more replies
Relevance 31.57%
Relevance 31.57%

hello all
can someone help me why my RAM details are shown differently in the below image?
click here

Answer:RAM frequency details

Windows Task manager is showing memory speed where CPU-Z is showing memory bandwidth they are different. Looking at the two figures it could be that the speed is the bandwidth x 2. I've tried to do a search on what the difference is but cannot find anything myself but some one may have the answer.

4 more replies
Relevance 31.57%

HI EVERYBODY!!!!!!!

I am Facing a problem in photoshop
When I am opening the photoshop The message appears that your display driver is in problem.
And after that Photoshop disables 3d function
PlZ help me what I should do .
I also updated My display Driver But in vain
PLZ see the attachments

Answer:Plz HELP Me About 3d in PHOTOSHOP See Details

Go into PS and disable the Graphics Processor Settings... Click Edit, Preferences, Performance and un-check the Use Graphics Processor box to stop Photoshop from using the graphics card to perform certain performance features



and see if that helps. Or, if set to advanced, click the dropdown box and set it to basic. It may be an issue where your graphics processor isn't sufficient enough to do what Photoshop wants to do in using the GPU.

Here's a FAQ on CS6 GPU questions.

Let us know if this helps.

BTW you might also want to figure out why you have those yellow exclamation marks in your device manager. That's pretty much saying you either have a missing driver or a defective device and Windows can't figure out what it is.

10 more replies
Relevance 31.57%

Trying to access one of my hard drives resulted in My Computer locking up, and upon ending the process explorer seems to get shut down. Task manager wouldn't come up so I'm forced to reset. Also trying to play something in winamp resulted in a sound driver error, when it was working fine beforehand.

I'm currently running Avast and MalwareBytes, and will keep this topic updated, I hope I can fix this....

If anyone has any input please share.

*EDIT*

I'm hoping this was just a random fluke and I'm being paranoid about nothing. Both MalwareBytes and Avast have come up with absolutely nothing on my main drive, though I'm still scanning my backup drive.

*EDIT*

Weird, all those problems stopped on their own, guess it was just a fluke.
 

More replies
Relevance 31.57%

So recently I decided to build up my music library on my phone, so I also wanted to update some of my music with details (album, artist, etc) but for some reason it won't let me do it even as an admin

So here's what I've done so far:

1. Went to properties
2. Went to details
3. Tried to edit "artist" field, but won't allow me

Any solutions?

Answer:Can't edit mp3 details

Like this?
Normally I use mp3tag (free)

10 more replies
Relevance 31.57%
Question: visible IP details

today I was on another forum about cars when one reply to a query had a lillte box in it which showed my ip address, my isp provider, my version of windows and my ie version, the last line says 'what is real? how do you define real?' moving the mouse over it, I was going down to the nect thread when this window popped up: click hereplease advise me a) have I been got? and 2) does anybody know this site?all help gratefully accepted.

Answer:visible IP details

Not really, every time you visit a website the server routinely records all that information in its log.You were driven to the site in your link so that you might consider buying the software that is advertised there. Unless you have some compelling reason to hide your IP (and very few people do) you should just forget it.

4 more replies
Relevance 31.57%
Question: personal details

recently changed my email address so tried to update my details here, unfortunately I get the message I will be assigned a new password and will need to pick a new nickname, I would like to retain these, is there any way around this? I assume I wont be able to change them back once the new details have gone through as they will be registered to my old email address. will I still be able to access my current postings? all I want to do is update my email address nothing else.

Answer:personal details

all you need to do is change your mail address in the boxes:-New E-mailRe-type New E-mailAll other information should remain as is.

4 more replies